Loading Documentation/PCI/index.rst +1 −1 Original line number Diff line number Diff line Loading @@ -9,7 +9,7 @@ Linux PCI Bus Subsystem :numbered: pci picebus-howto pciebus-howto pci-iov-howto msi-howto acpi-info Loading Documentation/PCI/picebus-howto.rst→Documentation/PCI/pciebus-howto.rst +0 −0 File moved. View file Documentation/admin-guide/kernel-parameters.txt +7 −0 Original line number Diff line number Diff line Loading @@ -4094,6 +4094,13 @@ Run specified binary instead of /init from the ramdisk, used for early userspace startup. See initrd. rdrand= [X86] force - Override the decision by the kernel to hide the advertisement of RDRAND support (this affects certain AMD processors because of buggy BIOS support, specifically around the suspend/resume path). rdt= [HW,X86,RDT] Turn on/off individual RDT features. List is: cmt, mbmtotal, mbmlocal, l3cat, l3cdp, l2cat, l2cdp, Loading Documentation/admin-guide/sysctl/net.rst +1 −28 Original line number Diff line number Diff line Loading @@ -39,7 +39,6 @@ Table : Subdirectories in /proc/sys/net 802 E802 protocol ax25 AX25 ethernet Ethernet protocol rose X.25 PLP layer ipv4 IP version 4 x25 X.25 protocol ipx IPX token-ring IBM token ring bridge Bridging decnet DEC net ipv6 IP version 6 tipc TIPC ========= =================== = ========== ================== Loading Loading @@ -401,33 +400,7 @@ interface. (network) that the route leads to, the router (may be directly connected), the route flags, and the device the route is using. 5. IPX ------ The IPX protocol has no tunable values in proc/sys/net. The IPX protocol does, however, provide proc/net/ipx. This lists each IPX socket giving the local and remote addresses in Novell format (that is network:node:port). In accordance with the strange Novell tradition, everything but the port is in hex. Not_Connected is displayed for sockets that are not tied to a specific remote address. The Tx and Rx queue sizes indicate the number of bytes pending for transmission and reception. The state indicates the state the socket is in and the uid is the owning uid of the socket. The /proc/net/ipx_interface file lists all IPX interfaces. For each interface it gives the network number, the node number, and indicates if the network is the primary network. It also indicates which device it is bound to (or Internal for internal networks) and the Frame Type if appropriate. Linux supports 802.3, 802.2, 802.2 SNAP and DIX (Blue Book) ethernet framing for IPX. The /proc/net/ipx_route table holds a list of IPX routes. For each route it gives the destination network, the router node (or Directly) and the network address of the router (or Connected) for internal networks. 6. TIPC 5. TIPC ------- tipc_rmem Loading Documentation/networking/tls-offload.rst +0 −18 Original line number Diff line number Diff line Loading @@ -506,21 +506,3 @@ Drivers should ignore the changes to TLS the device feature flags. These flags will be acted upon accordingly by the core ``ktls`` code. TLS device feature flags only control adding of new TLS connection offloads, old connections will remain active after flags are cleared. Known bugs ========== skb_orphan() leaks clear text ----------------------------- Currently drivers depend on the :c:member:`sk` member of :c:type:`struct sk_buff <sk_buff>` to identify segments requiring encryption. Any operation which removes or does not preserve the socket association such as :c:func:`skb_orphan` or :c:func:`skb_clone` will cause the driver to miss the packets and lead to clear text leaks. Redirects leak clear text ------------------------- In the RX direction, if segment has already been decrypted by the device and it gets redirected or mirrored - clear text will be transmitted out. Loading
Documentation/PCI/index.rst +1 −1 Original line number Diff line number Diff line Loading @@ -9,7 +9,7 @@ Linux PCI Bus Subsystem :numbered: pci picebus-howto pciebus-howto pci-iov-howto msi-howto acpi-info Loading
Documentation/admin-guide/kernel-parameters.txt +7 −0 Original line number Diff line number Diff line Loading @@ -4094,6 +4094,13 @@ Run specified binary instead of /init from the ramdisk, used for early userspace startup. See initrd. rdrand= [X86] force - Override the decision by the kernel to hide the advertisement of RDRAND support (this affects certain AMD processors because of buggy BIOS support, specifically around the suspend/resume path). rdt= [HW,X86,RDT] Turn on/off individual RDT features. List is: cmt, mbmtotal, mbmlocal, l3cat, l3cdp, l2cat, l2cdp, Loading
Documentation/admin-guide/sysctl/net.rst +1 −28 Original line number Diff line number Diff line Loading @@ -39,7 +39,6 @@ Table : Subdirectories in /proc/sys/net 802 E802 protocol ax25 AX25 ethernet Ethernet protocol rose X.25 PLP layer ipv4 IP version 4 x25 X.25 protocol ipx IPX token-ring IBM token ring bridge Bridging decnet DEC net ipv6 IP version 6 tipc TIPC ========= =================== = ========== ================== Loading Loading @@ -401,33 +400,7 @@ interface. (network) that the route leads to, the router (may be directly connected), the route flags, and the device the route is using. 5. IPX ------ The IPX protocol has no tunable values in proc/sys/net. The IPX protocol does, however, provide proc/net/ipx. This lists each IPX socket giving the local and remote addresses in Novell format (that is network:node:port). In accordance with the strange Novell tradition, everything but the port is in hex. Not_Connected is displayed for sockets that are not tied to a specific remote address. The Tx and Rx queue sizes indicate the number of bytes pending for transmission and reception. The state indicates the state the socket is in and the uid is the owning uid of the socket. The /proc/net/ipx_interface file lists all IPX interfaces. For each interface it gives the network number, the node number, and indicates if the network is the primary network. It also indicates which device it is bound to (or Internal for internal networks) and the Frame Type if appropriate. Linux supports 802.3, 802.2, 802.2 SNAP and DIX (Blue Book) ethernet framing for IPX. The /proc/net/ipx_route table holds a list of IPX routes. For each route it gives the destination network, the router node (or Directly) and the network address of the router (or Connected) for internal networks. 6. TIPC 5. TIPC ------- tipc_rmem Loading
Documentation/networking/tls-offload.rst +0 −18 Original line number Diff line number Diff line Loading @@ -506,21 +506,3 @@ Drivers should ignore the changes to TLS the device feature flags. These flags will be acted upon accordingly by the core ``ktls`` code. TLS device feature flags only control adding of new TLS connection offloads, old connections will remain active after flags are cleared. Known bugs ========== skb_orphan() leaks clear text ----------------------------- Currently drivers depend on the :c:member:`sk` member of :c:type:`struct sk_buff <sk_buff>` to identify segments requiring encryption. Any operation which removes or does not preserve the socket association such as :c:func:`skb_orphan` or :c:func:`skb_clone` will cause the driver to miss the packets and lead to clear text leaks. Redirects leak clear text ------------------------- In the RX direction, if segment has already been decrypted by the device and it gets redirected or mirrored - clear text will be transmitted out.
