Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1768aa2f authored by Laurent Pinchart's avatar Laurent Pinchart
Browse files

clocksource: sh_cmt: Add DT support 



Document DT bindings and parse them in the CMT driver.

Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 628627bf

Documentation/devicetree/bindings/timer/renesas,cmt.txt

0 → 100644
+47 −0
Original line number Diff line number Diff line 
* Renesas R-Car Compare Match Timer (CMT)



The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock

inputs and programmable compare match.



Channels share hardware resources but their counter and compare match value

are independent. A particular CMT instance can implement only a subset of the

channels supported by the CMT model. Channel indices represent the hardware

position of the channel in the CMT and don't match the channel numbers in the

datasheets.



Required Properties:



  - compatible: must contain one of the following.

    - "renesas,cmt-32" for the 32-bit CMT

		(CMT0 on sh7372, sh73a0 and r8a7740)

    - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support

		(CMT[234] on sh7372, sh73a0 and r8a7740)

    - "renesas,cmt-48" for the 48-bit CMT

		(CMT1 on sh7372, sh73a0 and r8a7740)

    - "renesas,cmt-48-gen2" for the second generation 48-bit CMT

		(CMT[01] on r8a73a4, r8a7790 and r8a7791)



  - reg: base address and length of the registers block for the timer module.

  - interrupts: interrupt-specifier for the timer, one per channel.

  - clocks: a list of phandle + clock-specifier pairs, one for each entry

    in clock-names.

  - clock-names: must contain "fck" for the functional clock.



  - renesas,channels-mask: bitmask of the available channels.





Example: R8A7790 (R-Car H2) CMT0 node



	CMT0 on R8A7790 implements hardware channels 5 and 6 only and names

	them channels 0 and 1 in the documentation.



	cmt0: timer@ffca0000 {

		compatible = "renesas,cmt-48-gen2";

		reg = <0 0xffca0000 0 0x1004>;

		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,

			     <0 142 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;

		clock-names = "fck";



		renesas,channels-mask = <0x60>;

	};

drivers/clocksource/sh_cmt.c

+48 −18
Original line number Diff line number Diff line
@@ -24,6 +24,7 @@ 
#include <linux/ioport.h>

#include <linux/irq.h>

#include <linux/module.h>

#include <linux/of.h>

#include <linux/platform_device.h>

#include <linux/pm_domain.h>

#include <linux/pm_runtime.h>
@@ -122,6 +123,7 @@ struct sh_cmt_device { 


	struct sh_cmt_channel *channels;

	unsigned int num_channels;

	unsigned int hw_channels;



	bool has_clockevent;

	bool has_clocksource;
@@ -924,10 +926,35 @@ static int sh_cmt_map_memory(struct sh_cmt_device *cmt) 
	return 0;

}



static const struct platform_device_id sh_cmt_id_table[] = {

	{ "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] },

	{ "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },

	{ "sh-cmt-32-fast", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT_FAST] },

	{ "sh-cmt-48", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT] },

	{ "sh-cmt-48-gen2", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT_GEN2] },

	{ }

};

MODULE_DEVICE_TABLE(platform, sh_cmt_id_table);



static const struct of_device_id sh_cmt_of_table[] __maybe_unused = {

	{ .compatible = "renesas,cmt-32", .data = &sh_cmt_info[SH_CMT_32BIT] },

	{ .compatible = "renesas,cmt-32-fast", .data = &sh_cmt_info[SH_CMT_32BIT_FAST] },

	{ .compatible = "renesas,cmt-48", .data = &sh_cmt_info[SH_CMT_48BIT] },

	{ .compatible = "renesas,cmt-48-gen2", .data = &sh_cmt_info[SH_CMT_48BIT_GEN2] },

	{ }

};

MODULE_DEVICE_TABLE(of, sh_cmt_of_table);



static int sh_cmt_parse_dt(struct sh_cmt_device *cmt)

{

	struct device_node *np = cmt->pdev->dev.of_node;



	return of_property_read_u32(np, "renesas,channels-mask",

				    &cmt->hw_channels);

}



static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)

{

	struct sh_timer_config *cfg = pdev->dev.platform_data;

	const struct platform_device_id *id = pdev->id_entry;

	unsigned int mask;

	unsigned int i;

	int ret;
@@ -936,13 +963,26 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev) 
	cmt->pdev = pdev;

	raw_spin_lock_init(&cmt->lock);



	if (!cfg) {

	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {

		const struct of_device_id *id;



		id = of_match_node(sh_cmt_of_table, pdev->dev.of_node);

		cmt->info = id->data;



		ret = sh_cmt_parse_dt(cmt);

		if (ret < 0)

			return ret;

	} else if (pdev->dev.platform_data) {

		struct sh_timer_config *cfg = pdev->dev.platform_data;

		const struct platform_device_id *id = pdev->id_entry;



		cmt->info = (const struct sh_cmt_info *)id->driver_data;

		cmt->hw_channels = cfg->channels_mask;

	} else {

		dev_err(&cmt->pdev->dev, "missing platform data\n");

		return -ENXIO;

	}



	cmt->info = (const struct sh_cmt_info *)id->driver_data;



	/* Get hold of clock. */

	cmt->clk = clk_get(&cmt->pdev->dev, "fck");

	if (IS_ERR(cmt->clk)) {
@@ -960,8 +1000,7 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev) 
		goto err_clk_unprepare;



	/* Allocate and setup the channels. */

	cmt->num_channels = hweight8(cfg->channels_mask);



	cmt->num_channels = hweight8(cmt->hw_channels);

	cmt->channels = kzalloc(cmt->num_channels * sizeof(*cmt->channels),

				GFP_KERNEL);

	if (cmt->channels == NULL) {
@@ -973,7 +1012,7 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev) 
	 * Use the first channel as a clock event device and the second channel

	 * as a clock source. If only one channel is available use it for both.

	 */

	for (i = 0, mask = cfg->channels_mask; i < cmt->num_channels; ++i) {

	for (i = 0, mask = cmt->hw_channels; i < cmt->num_channels; ++i) {

		unsigned int hwidx = ffs(mask) - 1;

		bool clocksource = i == 1 || cmt->num_channels == 1;

		bool clockevent = i == 0;
@@ -1042,21 +1081,12 @@ static int sh_cmt_remove(struct platform_device *pdev) 
	return -EBUSY; /* cannot unregister clockevent and clocksource */

}



static const struct platform_device_id sh_cmt_id_table[] = {

	{ "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] },

	{ "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },

	{ "sh-cmt-32-fast", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT_FAST] },

	{ "sh-cmt-48", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT] },

	{ "sh-cmt-48-gen2", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT_GEN2] },

	{ }

};

MODULE_DEVICE_TABLE(platform, sh_cmt_id_table);



static struct platform_driver sh_cmt_device_driver = {

	.probe		= sh_cmt_probe,

	.remove		= sh_cmt_remove,

	.driver		= {

		.name	= "sh_cmt",

		.of_match_table = of_match_ptr(sh_cmt_of_table),

	},

	.id_table	= sh_cmt_id_table,

};