Merge 4.19-rc4 into usb-next (1652a83f) · Commits · e / devices / android_kernel_fairphone_FP5

Documentation/ABI/stable/sysfs-devices-system-xen_memory

+9 −0

Original line number	Diff line number	Diff line
		@@ -75,3 +75,12 @@ Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
		Description:
		Amount (in KiB) of low (or normal) memory in the
		balloon.

		What: /sys/devices/system/xen_memory/xen_memory0/scrub_pages
		Date: September 2018
		KernelVersion: 4.20
		Contact: xen-devel@lists.xenproject.org
		Description:
		Control scrubbing pages before returning them to Xen for others domains
		use. Can be set with xen_scrub_pages cmdline
		parameter. Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.

+12 −0

Original line number	Diff line number	Diff line
		@@ -3523,6 +3523,12 @@
		ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
		See Documentation/blockdev/ramdisk.txt.

		random.trust_cpu={on,off}
		[KNL] Enable or disable trusting the use of the
		CPU's random number generator (if available) to
		fully seed the kernel's CRNG. Default is controlled
		by CONFIG_RANDOM_TRUST_CPU.

		ras=option[,option,...] [KNL] RAS-specific options

		cec_disable [X86]
		@@ -4994,6 +5000,12 @@
		Disables the PV optimizations forcing the HVM guest to
		run as generic HVM guest with no PV drivers.

		xen_scrub_pages= [XEN]
		Boolean option to control scrubbing pages before giving them back
		to Xen, for use by other domains. Can be also changed at runtime
		with /sys/devices/system/xen_memory/xen_memory0/scrub_pages.
		Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.

		xirc2ps_cs= [NET,PCMCIA]
		Format:
		<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]

+4 −0

Original line number	Diff line number	Diff line
		@@ -348,3 +348,7 @@ Version History
		1.13.1 Fix deadlock caused by early md_stop_writes(). Also fix size an
		state races.
		1.13.2 Fix raid redundancy validation and avoid keeping raid set frozen
		1.14.0 Fix reshape race on small devices. Fix stripe adding reshape
		deadlock/potential data corruption. Update superblock when
		specific devices are requested via rebuild. Fix RAID leg
		rebuild errors.

+1 −2

Original line number	Diff line number	Diff line
		@@ -3,7 +3,6 @@
		Required properties:
		- compatible :
		- "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
		- "fsl,imx8dv-lpi2c" for LPI2C compatible with the one integrated on i.MX8DV soc
		- reg : address and length of the lpi2c master registers
		- interrupts : lpi2c interrupt
		- clocks : lpi2c clock specifier
		@@ -11,7 +10,7 @@ Required properties:
		Examples:

		lpi2c7: lpi2c7@40a50000 {
		compatible = "fsl,imx8dv-lpi2c";
		compatible = "fsl,imx7ulp-lpi2c";
		reg = <0x40A50000 0x10000>;
		interrupt-parent = <&intc>;
		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;

+6 −0

Original line number	Diff line number	Diff line
		@@ -19,6 +19,10 @@ Required properties:
		- slaves : Specifies number for slaves
		- active_slave : Specifies the slave to use for time stamping,
		ethtool and SIOCGMIIPHY
		- cpsw-phy-sel : Specifies the phandle to the CPSW phy mode selection
		device. See also cpsw-phy-sel.txt for it's binding.
		Note that in legacy cases cpsw-phy-sel may be
		a child device instead of a phandle.

		Optional properties:
		- ti,hwmods : Must be "cpgmac0"
		@@ -75,6 +79,7 @@ Examples:
		cpts_clock_mult = <0x80000000>;
		cpts_clock_shift = <29>;
		syscon = <&cm>;
		cpsw-phy-sel = <&phy_sel>;
		cpsw_emac0: slave@0 {
		phy_id = <&davinci_mdio>, <0>;
		phy-mode = "rgmii-txid";
		@@ -103,6 +108,7 @@ Examples:
		cpts_clock_mult = <0x80000000>;
		cpts_clock_shift = <29>;
		syscon = <&cm>;
		cpsw-phy-sel = <&phy_sel>;
		cpsw_emac0: slave@0 {
		phy_id = <&davinci_mdio>, <0>;
		phy-mode = "rgmii-txid";