Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1599b532 authored by Harsh Agarwal's avatar Harsh Agarwal
Browse files

ARM: dts: msm: Add multiport USB support for SA8195 

This change adds multiport USB controller and PHYs related
configuration for the SA8195 platform.

Change-Id: I69519d7c58df0262a2d8be3ff60fd4597574e63d
parent cd6abf36

qcom/sa8195-usb.dtsi

+382 −2
Original line number Original line Diff line number Diff line 
#include <dt-bindings/clock/qcom,gcc-scshrike.h>

#include <dt-bindings/clock/qcom,gcc-scshrike.h>



#include <dt-bindings/phy/qcom,sm8150-qmp-usb3.h>

&soc {

&soc {

	/* Primary USB port related controller */

	/* Primary USB port related controller */

	usb0: ssusb@a600000 {

	usb0: ssusb@a600000 {
@@ -200,4 +200,384 @@ 
		qcom,param-override-seq = <0x43 0x70>;

		qcom,param-override-seq = <0x43 0x70>;

		qcom,rcal-mask = <0x1e00000>;

		qcom,rcal-mask = <0x1e00000>;

	};

	};



	/* Tertiary USB port related controller */

	usb2: ssusb@a400000 {

		compatible = "qcom,dwc-usb3-msm";

		reg = <0x0a400000 0x100000>;

		reg-names = "core_base";



		iommus = <&apps_smmu 0x60 0x0>;

		qcom,iommu-dma = "atomic";

		qcom,iommu-dma-addr-pool = <0x90000000 0x60000000>;

		#address-cells = <1>;

		#size-cells = <1>;

		ranges;

		dma-ranges;

		interrupts-extended = <&pdc 59 IRQ_TYPE_EDGE_RISING>,

					<&pdc 7 IRQ_TYPE_LEVEL_HIGH>,

					<&pdc 46 IRQ_TYPE_EDGE_RISING>,

					<&pdc 71 IRQ_TYPE_EDGE_RISING>,

					<&pdc 30 IRQ_TYPE_LEVEL_HIGH>,

					<&pdc 68 IRQ_TYPE_EDGE_RISING>;

		interrupt-names = "dp_hs_phy_irq", "ss_phy_irq",

				"dm_hs_phy_irq", "dp_hs_phy_irq1",

				"ss_phy_irq1", "dm_hs_phy_irq1";

		qcom,use-pdc-interrupts;



		USB3_GDSC-supply = <&usb30_mp_gdsc>;

		clocks = <&gcc GCC_USB30_MP_MASTER_CLK>,

			<&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,

			<&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,

			<&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,

			<&gcc GCC_USB30_MP_SLEEP_CLK>,

			<&rpmhcc RPMH_CXO_CLK>;

		clock-names = "core_clk", "iface_clk", "bus_aggr_clk",

					"utmi_clk", "sleep_clk", "xo";



		resets = <&gcc GCC_USB30_MP_BCR>;

		reset-names = "core_reset";



		qcom,core-clk-rate = <200000000>;

		qcom,ignore-wakeup-src-in-hostmode;

		qcom,dual-port;



		interconnect-names = "usb-ddr", "ddr-usb";

		interconnects = <&aggre1_noc MASTER_USB3_2 &mc_virt SLAVE_EBI1>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_2>;



		dwc3@a400000 {

			compatible = "snps,dwc3";

			reg = <0x0a400000 0xcd00>;

			interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH>;

			usb-phy = <&usb2_phy2>, <&usb_qmp_phy0>,

				<&usb2_phy3>, <&usb_qmp_phy1>;

			linux,sysdev_is_parent;

			snps,disable-clk-gating;

			snps,has-lpm-erratum;

			snps,hird-threshold = /bits/ 8 <0x0>;

			snps,is-utmi-l1-suspend;

			snps,ssp-u3-u0-quirk;

			snps,dis-u1-entry-quirk;

			snps,dis-u2-entry-quirk;

			snps,dis_u3_susphy_quirk;

			maximum-speed = "super-speed-plus";

			dr_mode = "host";

		};

		};

	};



	/* Tertiary USB port 0 related High Speed PHY */

	usb2_phy2: hsphy@88e4000 {

		compatible = "qcom,usb-hsphy-snps-femto";

		reg = <0x88e4000 0x110>,

		    <0x007801f8 0x4>;

		reg-names = "hsusb_phy_base",

			"phy_rcal_reg";



		vdd-supply = <&pm8150_2_l5>;

		vdda18-supply = <&pm8150_1_l12>;

		vdda33-supply = <&pm8150_2_l16>;

		qcom,vdd-voltage-level = <0 880000 880000>;



		clocks = <&rpmhcc RPMH_CXO_CLK>;

		clock-names = "ref_clk_src";



		resets = <&gcc GCC_QUSB2PHY_MP0_BCR>;

		reset-names = "phy_reset";

		qcom,param-override-seq = <0x43 0x70>;

		qcom,rcal-mask = <0x1e00000>;

	};



	/* Tertiary USB port 0 related QMP PHY */

	usb_qmp_phy0: ssphy@88eb000 {

		compatible = "qcom,usb-ssphy-qmp-v2";

		reg = <0x88eb000 0x1000>,

		    <0x088eb88c 0x4>;

		reg-names = "qmp_phy_base",

			"pcs_clamp_enable_reg";



		vdd-supply = <&pm8150_1_l9>;

		qcom,vdd-voltage-level = <0 880000 880000>;

		qcom,vdd-max-load-uA = <47000>;

		core-supply = <&pm8150_2_l16>;

		qcom,qmp-phy-init-seq =

		    /* <reg_offset, value, delay> */

		    <USB3_UNI_QSERDES_COM_SYSCLK_EN_SEL 0x1a 0

		     USB3_UNI_QSERDES_COM_BIN_VCOCAL_HSCLK_SEL 0x11 0

		     USB3_UNI_QSERDES_COM_HSCLK_SEL 0x01 0

		     USB3_UNI_QSERDES_COM_DEC_START_MODE0 0x82 0

		     USB3_UNI_QSERDES_COM_DIV_FRAC_START1_MODE0 0xab 0

		     USB3_UNI_QSERDES_COM_DIV_FRAC_START2_MODE0 0xea 0

		     USB3_UNI_QSERDES_COM_DIV_FRAC_START3_MODE0 0x02 0

		     USB3_UNI_QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0xca 0

		     USB3_UNI_QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x1e 0

		     USB3_UNI_QSERDES_COM_CP_CTRL_MODE0 0x02 0

		     USB3_UNI_QSERDES_COM_PLL_RCTRL_MODE0 0x16 0

		     USB3_UNI_QSERDES_COM_PLL_CCTRL_MODE0 0x36 0

		     USB3_UNI_QSERDES_COM_VCO_TUNE1_MODE0 0x24 0

		     USB3_UNI_QSERDES_COM_LOCK_CMP2_MODE0 0x34 0

		     USB3_UNI_QSERDES_COM_LOCK_CMP1_MODE0 0x14 0

		     USB3_UNI_QSERDES_COM_LOCK_CMP_EN 0x04 0

		     USB3_UNI_QSERDES_COM_SYSCLK_BUF_ENABLE 0x0a 0

		     USB3_UNI_QSERDES_COM_VCO_TUNE2_MODE1 0x02 0

		     USB3_UNI_QSERDES_COM_VCO_TUNE1_MODE1 0x24 0

		     USB3_UNI_QSERDES_COM_CORECLK_DIV_MODE1 0x08 0

		     USB3_UNI_QSERDES_COM_DEC_START_MODE1 0x82 0

		     USB3_UNI_QSERDES_COM_DIV_FRAC_START1_MODE1 0xab 0

		     USB3_UNI_QSERDES_COM_DIV_FRAC_START2_MODE1 0xea 0

		     USB3_UNI_QSERDES_COM_DIV_FRAC_START3_MODE1 0x02 0

		     USB3_UNI_QSERDES_COM_LOCK_CMP2_MODE1 0x82 0

		     USB3_UNI_QSERDES_COM_LOCK_CMP1_MODE1 0x34 0

		     USB3_UNI_QSERDES_COM_CP_CTRL_MODE1 0x06 0

		     USB3_UNI_QSERDES_COM_PLL_RCTRL_MODE1 0x16 0

		     USB3_UNI_QSERDES_COM_PLL_CCTRL_MODE1 0x36 0

		     USB3_UNI_QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0xca 0

		     USB3_UNI_QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x1e 0

		     USB3_UNI_QSERDES_COM_CMN_IPTRIM 0x20 0

		     USB3_UNI_QSERDES_COM_SSC_EN_CENTER 0x01 0

		     USB3_UNI_QSERDES_COM_SSC_PER1 0x31 0

		     USB3_UNI_QSERDES_COM_SSC_PER2 0x01 0

		     USB3_UNI_QSERDES_COM_SSC_STEP_SIZE1_MODE1 0xde 0

		     USB3_UNI_QSERDES_COM_SSC_STEP_SIZE2_MODE1 0x07 0

		     USB3_UNI_QSERDES_COM_SSC_STEP_SIZE1_MODE0 0xde 0

		     USB3_UNI_QSERDES_COM_SSC_STEP_SIZE2_MODE0 0x07 0

		     USB3_UNI_QSERDES_COM_VCO_TUNE_MAP 0x02 0

		     USB3_UNI_QSERDES_RX_RX_MODE_00_HIGH4 0x86 0

		     USB3_UNI_QSERDES_RX_RX_MODE_00_HIGH3 0x7f 0

		     USB3_UNI_QSERDES_RX_RX_MODE_00_HIGH2 0xff 0

		     USB3_UNI_QSERDES_RX_RX_MODE_00_HIGH 0x3f 0

		     USB3_UNI_QSERDES_RX_RX_MODE_00_LOW 0xff 0

		     USB3_UNI_QSERDES_RX_RX_MODE_01_HIGH4 0xb3 0

		     USB3_UNI_QSERDES_RX_RX_MODE_01_HIGH3 0x0b 0

		     USB3_UNI_QSERDES_RX_RX_MODE_01_HIGH2 0x5c 0

		     USB3_UNI_QSERDES_RX_RX_MODE_01_HIGH 0xdc 0

		     USB3_UNI_QSERDES_RX_RX_MODE_01_LOW 0xdc 0

		     USB3_UNI_QSERDES_RX_UCDR_PI_CONTROLS 0x99 0

		     USB3_UNI_QSERDES_RX_UCDR_SB2_THRESH1 0x04 0

		     USB3_UNI_QSERDES_RX_UCDR_SB2_THRESH2 0x08 0

		     USB3_UNI_QSERDES_RX_UCDR_SB2_GAIN1 0x05 0

		     USB3_UNI_QSERDES_RX_UCDR_SB2_GAIN2 0x05 0

		     USB3_UNI_QSERDES_RX_UCDR_FASTLOCK_FO_GAIN 0x2f 0

		     USB3_UNI_QSERDES_RX_UCDR_FASTLOCK_COUNT_LOW 0xff 0

		     USB3_UNI_QSERDES_RX_UCDR_FASTLOCK_COUNT_HIGH 0x0f 0

		     USB3_UNI_QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE 0x7f 0

		     USB3_UNI_QSERDES_RX_UCDR_FO_GAIN 0x0a 0

		     USB3_UNI_QSERDES_RX_VGA_CAL_CNTRL1 0x54 0

		     USB3_UNI_QSERDES_RX_VGA_CAL_CNTRL2 0x0f 0

		     USB3_UNI_QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 0x0f 0

		     USB3_UNI_QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3 0x4a 0

		     USB3_UNI_QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4 0x0a 0

		     USB3_UNI_QSERDES_RX_DFE_EN_TIMER 0x04 0

		     USB3_UNI_QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x47 0

		     USB3_UNI_QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x80 0

		     USB3_UNI_QSERDES_RX_SIGDET_CNTRL 0x04 0

		     USB3_UNI_QSERDES_RX_SIGDET_DEGLITCH_CNTRL 0x0e 0

		     USB3_UNI_QSERDES_RX_RX_IDAC_TSETTLE_HIGH 0x00 0

		     USB3_UNI_QSERDES_RX_RX_IDAC_TSETTLE_LOW 0xc0 0

		     USB3_UNI_QSERDES_RX_DFE_CTLE_POST_CAL_OFFSET 0x38 0

		     USB3_UNI_QSERDES_RX_UCDR_SO_GAIN 0x06 0

		     USB3_UNI_QSERDES_RX_DCC_CTRL1 0x0c 0

		     USB3_UNI_QSERDES_RX_GM_CAL 0x1f 0

		     USB3_UNI_QSERDES_TX_RCV_DETECT_LVL_2 0x12 0

		     USB3_UNI_QSERDES_TX_LANE_MODE_1 0xd5 0

		     USB3_UNI_QSERDES_TX_LANE_MODE_2 0x00 0

		     USB3_UNI_QSERDES_TX_PI_QEC_CTRL 0x40 0

		     USB3_UNI_QSERDES_TX_RES_CODE_LANE_OFFSET_TX 0x11 0

		     USB3_UNI_QSERDES_TX_RES_CODE_LANE_OFFSET_RX 0x02 0

		     USB3_UNI_PCS_LOCK_DETECT_CONFIG1 0xd0 0

		     USB3_UNI_PCS_LOCK_DETECT_CONFIG2 0x07 0

		     USB3_UNI_PCS_LOCK_DETECT_CONFIG3 0x20 0

		     USB3_UNI_PCS_LOCK_DETECT_CONFIG6 0x13 0

		     USB3_UNI_PCS_RCVR_DTCT_DLY_P1U2_L 0xe7 0

		     USB3_UNI_PCS_RCVR_DTCT_DLY_P1U2_H 0x03 0

		     USB3_UNI_PCS_RX_SIGDET_LVL 0xaa 0

		     USB3_UNI_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x07 0

		     USB3_UNI_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0xf8 0

		     USB3_UNI_PCS_CDR_RESET_TIME 0x0a 0

		     USB3_UNI_PCS_ALIGN_DETECT_CONFIG1 0x88 0

		     USB3_UNI_PCS_ALIGN_DETECT_CONFIG2 0x13 0

		     USB3_UNI_PCS_EQ_CONFIG1 0x4b 0

		     USB3_UNI_PCS_EQ_CONFIG5 0x10 0

		     USB3_UNI_PCS_REFGEN_REQ_CONFIG1 0x21 0

		     USB3_UNI_PCS_PCS_TX_RX_CONFIG 0x0c 0

		     0xffffffff 0xffffffff 0x00>;



		qcom,qmp-phy-reg-offset =

				<USB3_UNI_PCS_PCS_STATUS1

				 USB3_UNI_PCS_USB3_AUTONOMOUS_MODE_CTRL

				 USB3_UNI_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR

				 USB3_UNI_PCS_POWER_DOWN_CONTROL

				 USB3_UNI_PCS_SW_RESET

				 USB3_UNI_PCS_START_CONTROL>;



		clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,

			 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>,

			 <&rpmhcc RPMH_CXO_CLK>,

			 <&gcc GCC_USB3_SEC_CLKREF_CLK>,

			 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;

		clock-names = "aux_clk", "pipe_clk", "ref_clk_src",

				"ref_clk", "com_aux_clk";



		resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,

			<&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;

		reset-names = "phy_reset", "phy_phy_reset";

	};



	/* Tertiary USB port 1 related High Speed PHY */

	usb2_phy3: hsphy@88e5000 {

		compatible = "qcom,usb-hsphy-snps-femto";

		reg = <0x88e5000 0x110>,

		    <0x007801f8 0x4>;

		reg-names = "hsusb_phy_base",

			"phy_rcal_reg";



		vdd-supply = <&pm8150_2_l5>;

		vdda18-supply = <&pm8150_1_l12>;

		vdda33-supply = <&pm8150_2_l16>;

		qcom,vdd-voltage-level = <0 880000 880000>;



		clocks = <&rpmhcc RPMH_CXO_CLK>;

		clock-names = "ref_clk_src";



		resets = <&gcc GCC_QUSB2PHY_MP1_BCR>;

		reset-names = "phy_reset";

		qcom,param-override-seq = <0x43 0x70>;

		qcom,rcal-mask = <0x1e00000>;

	};



	/* Tertiary USB port 1 related QMP PHY */

	usb_qmp_phy1: ssphy@88ec000 {

		compatible = "qcom,usb-ssphy-qmp-v2";

		reg = <0x88ec000 0x1000>,

		    <0x088ec88c 0x4>;

		reg-names = "qmp_phy_base",

			"pcs_clamp_enable_reg";



		vdd-supply = <&pm8150_1_l9>;

		qcom,vdd-voltage-level = <0 880000 880000>;

		qcom,vdd-max-load-uA = <47000>;

		core-supply = <&pm8150_2_l16>;

		qcom,qmp-phy-init-seq =

		    /* <reg_offset, value, delay> */

		    <USB3_UNI_QSERDES_COM_SYSCLK_EN_SEL 0x1a 0

		     USB3_UNI_QSERDES_COM_BIN_VCOCAL_HSCLK_SEL 0x11 0

		     USB3_UNI_QSERDES_COM_HSCLK_SEL 0x01 0

		     USB3_UNI_QSERDES_COM_DEC_START_MODE0 0x82 0

		     USB3_UNI_QSERDES_COM_DIV_FRAC_START1_MODE0 0xab 0

		     USB3_UNI_QSERDES_COM_DIV_FRAC_START2_MODE0 0xea 0

		     USB3_UNI_QSERDES_COM_DIV_FRAC_START3_MODE0 0x02 0

		     USB3_UNI_QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0xca 0

		     USB3_UNI_QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x1e 0

		     USB3_UNI_QSERDES_COM_CP_CTRL_MODE0 0x02 0

		     USB3_UNI_QSERDES_COM_PLL_RCTRL_MODE0 0x16 0

		     USB3_UNI_QSERDES_COM_PLL_CCTRL_MODE0 0x36 0

		     USB3_UNI_QSERDES_COM_VCO_TUNE1_MODE0 0x24 0

		     USB3_UNI_QSERDES_COM_LOCK_CMP2_MODE0 0x34 0

		     USB3_UNI_QSERDES_COM_LOCK_CMP1_MODE0 0x14 0

		     USB3_UNI_QSERDES_COM_LOCK_CMP_EN 0x04 0

		     USB3_UNI_QSERDES_COM_SYSCLK_BUF_ENABLE 0x0a 0

		     USB3_UNI_QSERDES_COM_VCO_TUNE2_MODE1 0x02 0

		     USB3_UNI_QSERDES_COM_VCO_TUNE1_MODE1 0x24 0

		     USB3_UNI_QSERDES_COM_CORECLK_DIV_MODE1 0x08 0

		     USB3_UNI_QSERDES_COM_DEC_START_MODE1 0x82 0

		     USB3_UNI_QSERDES_COM_DIV_FRAC_START1_MODE1 0xab 0

		     USB3_UNI_QSERDES_COM_DIV_FRAC_START2_MODE1 0xea 0

		     USB3_UNI_QSERDES_COM_DIV_FRAC_START3_MODE1 0x02 0

		     USB3_UNI_QSERDES_COM_LOCK_CMP2_MODE1 0x82 0

		     USB3_UNI_QSERDES_COM_LOCK_CMP1_MODE1 0x34 0

		     USB3_UNI_QSERDES_COM_CP_CTRL_MODE1 0x06 0

		     USB3_UNI_QSERDES_COM_PLL_RCTRL_MODE1 0x16 0

		     USB3_UNI_QSERDES_COM_PLL_CCTRL_MODE1 0x36 0

		     USB3_UNI_QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0xca 0

		     USB3_UNI_QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x1e 0

		     USB3_UNI_QSERDES_COM_CMN_IPTRIM 0x20 0

		     USB3_UNI_QSERDES_COM_SSC_EN_CENTER 0x01 0

		     USB3_UNI_QSERDES_COM_SSC_PER1 0x31 0

		     USB3_UNI_QSERDES_COM_SSC_PER2 0x01 0

		     USB3_UNI_QSERDES_COM_SSC_STEP_SIZE1_MODE1 0xde 0

		     USB3_UNI_QSERDES_COM_SSC_STEP_SIZE2_MODE1 0x07 0

		     USB3_UNI_QSERDES_COM_SSC_STEP_SIZE1_MODE0 0xde 0

		     USB3_UNI_QSERDES_COM_SSC_STEP_SIZE2_MODE0 0x07 0

		     USB3_UNI_QSERDES_COM_VCO_TUNE_MAP 0x02 0

		     USB3_UNI_QSERDES_RX_RX_MODE_00_HIGH4 0x86 0

		     USB3_UNI_QSERDES_RX_RX_MODE_00_HIGH3 0x7f 0

		     USB3_UNI_QSERDES_RX_RX_MODE_00_HIGH2 0xff 0

		     USB3_UNI_QSERDES_RX_RX_MODE_00_HIGH 0x3f 0

		     USB3_UNI_QSERDES_RX_RX_MODE_00_LOW 0xff 0

		     USB3_UNI_QSERDES_RX_RX_MODE_01_HIGH4 0xb3 0

		     USB3_UNI_QSERDES_RX_RX_MODE_01_HIGH3 0x0b 0

		     USB3_UNI_QSERDES_RX_RX_MODE_01_HIGH2 0x5c 0

		     USB3_UNI_QSERDES_RX_RX_MODE_01_HIGH 0xdc 0

		     USB3_UNI_QSERDES_RX_RX_MODE_01_LOW 0xdc 0

		     USB3_UNI_QSERDES_RX_UCDR_PI_CONTROLS 0x99 0

		     USB3_UNI_QSERDES_RX_UCDR_SB2_THRESH1 0x04 0

		     USB3_UNI_QSERDES_RX_UCDR_SB2_THRESH2 0x08 0

		     USB3_UNI_QSERDES_RX_UCDR_SB2_GAIN1 0x05 0

		     USB3_UNI_QSERDES_RX_UCDR_SB2_GAIN2 0x05 0

		     USB3_UNI_QSERDES_RX_UCDR_FASTLOCK_FO_GAIN 0x2f 0

		     USB3_UNI_QSERDES_RX_UCDR_FASTLOCK_COUNT_LOW 0xff 0

		     USB3_UNI_QSERDES_RX_UCDR_FASTLOCK_COUNT_HIGH 0x0f 0

		     USB3_UNI_QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE 0x7f 0

		     USB3_UNI_QSERDES_RX_UCDR_FO_GAIN 0x0a 0

		     USB3_UNI_QSERDES_RX_VGA_CAL_CNTRL1 0x54 0

		     USB3_UNI_QSERDES_RX_VGA_CAL_CNTRL2 0x0f 0

		     USB3_UNI_QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 0x0f 0

		     USB3_UNI_QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3 0x4a 0

		     USB3_UNI_QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4 0x0a 0

		     USB3_UNI_QSERDES_RX_DFE_EN_TIMER 0x04 0

		     USB3_UNI_QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x47 0

		     USB3_UNI_QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x80 0

		     USB3_UNI_QSERDES_RX_SIGDET_CNTRL 0x04 0

		     USB3_UNI_QSERDES_RX_SIGDET_DEGLITCH_CNTRL 0x0e 0

		     USB3_UNI_QSERDES_RX_RX_IDAC_TSETTLE_HIGH 0x00 0

		     USB3_UNI_QSERDES_RX_RX_IDAC_TSETTLE_LOW 0xc0 0

		     USB3_UNI_QSERDES_RX_DFE_CTLE_POST_CAL_OFFSET 0x38 0

		     USB3_UNI_QSERDES_RX_UCDR_SO_GAIN 0x06 0

		     USB3_UNI_QSERDES_RX_DCC_CTRL1 0x0c 0

		     USB3_UNI_QSERDES_RX_GM_CAL 0x1f 0

		     USB3_UNI_QSERDES_TX_RCV_DETECT_LVL_2 0x12 0

		     USB3_UNI_QSERDES_TX_LANE_MODE_1 0xd5 0

		     USB3_UNI_QSERDES_TX_LANE_MODE_2 0x00 0

		     USB3_UNI_QSERDES_TX_PI_QEC_CTRL 0x40 0

		     USB3_UNI_QSERDES_TX_RES_CODE_LANE_OFFSET_TX 0x11 0

		     USB3_UNI_QSERDES_TX_RES_CODE_LANE_OFFSET_RX 0x02 0

		     USB3_UNI_PCS_LOCK_DETECT_CONFIG1 0xd0 0

		     USB3_UNI_PCS_LOCK_DETECT_CONFIG2 0x07 0

		     USB3_UNI_PCS_LOCK_DETECT_CONFIG3 0x20 0

		     USB3_UNI_PCS_LOCK_DETECT_CONFIG6 0x13 0

		     USB3_UNI_PCS_RCVR_DTCT_DLY_P1U2_L 0xe7 0

		     USB3_UNI_PCS_RCVR_DTCT_DLY_P1U2_H 0x03 0

		     USB3_UNI_PCS_RX_SIGDET_LVL 0xaa 0

		     USB3_UNI_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x07 0

		     USB3_UNI_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0xf8 0

		     USB3_UNI_PCS_CDR_RESET_TIME 0x0a 0

		     USB3_UNI_PCS_ALIGN_DETECT_CONFIG1 0x88 0

		     USB3_UNI_PCS_ALIGN_DETECT_CONFIG2 0x13 0

		     USB3_UNI_PCS_EQ_CONFIG1 0x4b 0

		     USB3_UNI_PCS_EQ_CONFIG5 0x10 0

		     USB3_UNI_PCS_REFGEN_REQ_CONFIG1 0x21 0

		     USB3_UNI_PCS_PCS_TX_RX_CONFIG 0x0c 0

		     0xffffffff 0xffffffff 0x00>;



		qcom,qmp-phy-reg-offset =

				<USB3_UNI_PCS_PCS_STATUS1

				 USB3_UNI_PCS_USB3_AUTONOMOUS_MODE_CTRL

				 USB3_UNI_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR

				 USB3_UNI_PCS_POWER_DOWN_CONTROL

				 USB3_UNI_PCS_SW_RESET

				 USB3_UNI_PCS_START_CONTROL>;



		clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,

			 <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>,

			 <&rpmhcc RPMH_CXO_CLK>,

			 <&gcc GCC_PCIE_1_CLKREF_CLK>,

			 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;

		clock-names = "aux_clk", "pipe_clk", "ref_clk_src",

				"ref_clk", "com_aux_clk";



		resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,

			<&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;

		reset-names = "phy_reset", "phy_phy_reset";

	};

};

qcom/sa8195p.dtsi

+22 −0
Original line number Original line Diff line number Diff line
@@ -71,3 +71,25 @@ 
	vdda18-supply = <&pm8195_1_l12>;

	vdda18-supply = <&pm8195_1_l12>;

	vdda33-supply = <&pm8195_3_l16>;

	vdda33-supply = <&pm8195_3_l16>;

};

};



&usb2_phy2 {

	vdd-supply = <&pm8195_3_l5>;

	vdda18-supply = <&pm8195_1_l12>;

	vdda33-supply = <&pm8195_3_l16>;

};



&usb_qmp_phy0 {

	vdd-supply = <&pm8195_3_l9>;

	core-supply = <&pm8195_1_l9>;

};



&usb2_phy3 {

	vdd-supply = <&pm8195_3_l5>;

	vdda18-supply = <&pm8195_1_l12>;

	vdda33-supply = <&pm8195_3_l16>;

};



&usb_qmp_phy1 {

	vdd-supply = <&pm8195_3_l9>;

	core-supply = <&pm8195_1_l9>;

};