Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 14e63a95 authored by Sricharan R's avatar Sricharan R Committed by Andy Gross
Browse files

ARM: dts: qcom: Add led and gpio-button nodes to ipq8064 boards 



Add the dt nodes for enabling the leds and gpio-buttons.

Signed-off-by: default avatarSricharan R <sricharan@codeaurora.org>
Signed-off-by: default avatarAndy Gross <andy.gross@linaro.org>
parent 2e7a2c91

arch/arm/boot/dts/qcom-ipq8064-ap148.dts

+8 −0
Original line number Diff line number Diff line
@@ -12,6 +12,14 @@ 
				function = "gsbi4";

				bias-disable;

			};



			buttons_pins: buttons_pins {

				mux {

					pins = "gpio54", "gpio65";

					drive-strength = <2>;

					bias-pull-up;

				};

			};

		};



		gsbi@16300000 {

arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi

+60 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

#include "qcom-ipq8064.dtsi"

#include <dt-bindings/input/input.h>



/ {

	model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
@@ -63,5 +64,64 @@ 
			ports-implemented = <0x1>;

			status = "ok";

		};



		gpio_keys {

			compatible = "gpio-keys";

			pinctrl-0 = <&buttons_pins>;

			pinctrl-names = "default";



			button@1 {

				label = "reset";

				linux,code = <KEY_RESTART>;

				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;

				linux,input-type = <1>;

				debounce-interval = <60>;

			};

			button@2 {

				label = "wps";

				linux,code = <KEY_WPS_BUTTON>;

				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;

				linux,input-type = <1>;

				debounce-interval = <60>;

			};

		};



		leds {

			compatible = "gpio-leds";

			pinctrl-0 = <&leds_pins>;

			pinctrl-names = "default";



			led@7 {

				label = "led_usb1";

				gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;

				linux,default-trigger = "usbdev";

				default-state = "off";

			};



			led@8 {

				label = "led_usb3";

				gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;

				linux,default-trigger = "usbdev";

				default-state = "off";

			};



			led@9 {

				label = "status_led_fail";

				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;

				default-state = "off";

			};



			led@26 {

				label = "sata_led";

				gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;

				default-state = "off";

			};



			led@53 {

				label = "status_led_pass";

				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;

				default-state = "off";

			};

		};

	};

};

arch/arm/boot/dts/qcom-ipq8064.dtsi

+19 −0
Original line number Diff line number Diff line
@@ -153,6 +153,25 @@ 
					bias-none;

				};

			};



			leds_pins: leds_pins {

				mux {

					pins = "gpio7", "gpio8", "gpio9",

					       "gpio26", "gpio53";

					function = "gpio";

					drive-strength = <2>;

					bias-pull-down;

					output-low;

				};

			};



			buttons_pins: buttons_pins {

				mux {

					pins = "gpio54";

					drive-strength = <2>;

					bias-pull-up;

				};

			};

		};



		intc: interrupt-controller@2000000 {