diff --git a/CREDITS b/CREDITS index 206d0fcf07a5a22170670f93c43481094916fe36..9416a9a8b95e6c4404c80ade376feff7b6df406a 100644 --- a/CREDITS +++ b/CREDITS @@ -637,14 +637,13 @@ S: 14509 NE 39th Street #1096 S: Bellevue, Washington 98007 S: USA -N: Christopher L. Cheney -E: ccheney@debian.org -E: ccheney@cheney.cx -W: http://www.cheney.cx +N: Chris Cheney +E: chris.cheney@gmail.com +E: ccheney@redhat.com P: 1024D/8E384AF2 2D31 1927 87D7 1F24 9FF9 1BC5 D106 5AB3 8E38 4AF2 D: Vista Imaging usb webcam driver -S: 314 Prince of Wales -S: Conroe, TX 77304 +S: 2308 Therrell Way +S: McKinney, TX 75070 S: USA N: Stuart Cheshire @@ -1120,6 +1119,7 @@ D: author of userfs filesystem D: Improved mmap and munmap handling D: General mm minor tidyups D: autofs v4 maintainer +D: Xen subsystem S: 987 Alabama St S: San Francisco S: CA, 94110 diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 0c4cc688e89ae72ebb2749a93636ea98d81a3e7c..38f8444bdd0e2b6df55d5643f5ac73319e2663ad 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -40,7 +40,7 @@ IPMI.txt IRQ-affinity.txt - how to select which CPU(s) handle which interrupt events on SMP. IRQ-domain.txt - - info on inerrupt numbering and setting up IRQ domains. + - info on interrupt numbering and setting up IRQ domains. IRQ.txt - description of what an IRQ is. Intel-IOMMU.txt diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb new file mode 100644 index 0000000000000000000000000000000000000000..2be603c52a240fa55f1a630d4f3567cc9c134d19 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-bus-usb @@ -0,0 +1,142 @@ +What: /sys/bus/usb/devices/.../power/persist +Date: May 2007 +KernelVersion: 2.6.23 +Contact: Alan Stern +Description: + If CONFIG_USB_PERSIST is set, then each USB device directory + will contain a file named power/persist. The file holds a + boolean value (0 or 1) indicating whether or not the + "USB-Persist" facility is enabled for the device. Since the + facility is inherently dangerous, it is disabled by default + for all devices except hubs. For more information, see + Documentation/usb/persist.txt. + +What: /sys/bus/usb/devices/.../power/autosuspend +Date: March 2007 +KernelVersion: 2.6.21 +Contact: Alan Stern +Description: + Each USB device directory will contain a file named + power/autosuspend. This file holds the time (in seconds) + the device must be idle before it will be autosuspended. + 0 means the device will be autosuspended as soon as + possible. Negative values will prevent the device from + being autosuspended at all, and writing a negative value + will resume the device if it is already suspended. + + The autosuspend delay for newly-created devices is set to + the value of the usbcore.autosuspend module parameter. + +What: /sys/bus/usb/device/.../power/connected_duration +Date: January 2008 +KernelVersion: 2.6.25 +Contact: Sarah Sharp +Description: + If CONFIG_PM_RUNTIME is enabled then this file + is present. When read, it returns the total time (in msec) + that the USB device has been connected to the machine. This + file is read-only. +Users: + PowerTOP + http://www.lesswatts.org/projects/powertop/ + +What: /sys/bus/usb/device/.../power/active_duration +Date: January 2008 +KernelVersion: 2.6.25 +Contact: Sarah Sharp +Description: + If CONFIG_PM_RUNTIME is enabled then this file + is present. When read, it returns the total time (in msec) + that the USB device has been active, i.e. not in a suspended + state. This file is read-only. + + Tools can use this file and the connected_duration file to + compute the percentage of time that a device has been active. + For example, + echo $((100 * `cat active_duration` / `cat connected_duration`)) + will give an integer percentage. Note that this does not + account for counter wrap. +Users: + PowerTOP + http://www.lesswatts.org/projects/powertop/ + +What: /sys/bus/usb/devices/-...:-/supports_autosuspend +Date: January 2008 +KernelVersion: 2.6.27 +Contact: Sarah Sharp +Description: + When read, this file returns 1 if the interface driver + for this interface supports autosuspend. It also + returns 1 if no driver has claimed this interface, as an + unclaimed interface will not stop the device from being + autosuspended if all other interface drivers are idle. + The file returns 0 if autosuspend support has not been + added to the driver. +Users: + USB PM tool + git://git.moblin.org/users/sarah/usb-pm-tool/ + +What: /sys/bus/usb/device/.../avoid_reset_quirk +Date: December 2009 +Contact: Oliver Neukum +Description: + Writing 1 to this file tells the kernel that this + device will morph into another mode when it is reset. + Drivers will not use reset for error handling for + such devices. +Users: + usb_modeswitch + +What: /sys/bus/usb/devices/.../devnum +KernelVersion: since at least 2.6.18 +Description: + Device address on the USB bus. +Users: + libusb + +What: /sys/bus/usb/devices/.../bConfigurationValue +KernelVersion: since at least 2.6.18 +Description: + bConfigurationValue of the *active* configuration for the + device. Writing 0 or -1 to bConfigurationValue will reset the + active configuration (unconfigure the device). Writing + another value will change the active configuration. + + Note that some devices, in violation of the USB spec, have a + configuration with a value equal to 0. Writing 0 to + bConfigurationValue for these devices will install that + configuration, rather then unconfigure the device. + + Writing -1 will always unconfigure the device. +Users: + libusb + +What: /sys/bus/usb/devices/.../busnum +KernelVersion: 2.6.22 +Description: + Bus-number of the USB-bus the device is connected to. +Users: + libusb + +What: /sys/bus/usb/devices/.../descriptors +KernelVersion: 2.6.26 +Description: + Binary file containing cached descriptors of the device. The + binary data consists of the device descriptor followed by the + descriptors for each configuration of the device. + Note that the wTotalLength of the config descriptors can not + be trusted, as the device may have a smaller config descriptor + than it advertises. The bLength field of each (sub) descriptor + can be trusted, and can be used to seek forward one (sub) + descriptor at a time until the next config descriptor is found. + All descriptors read from this file are in bus-endian format +Users: + libusb + +What: /sys/bus/usb/devices/.../speed +KernelVersion: since at least 2.6.18 +Description: + Speed the device is connected with to the usb-host in + Mbit / second. IE one of 1.5 / 12 / 480 / 5000. +Users: + libusb diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram index ec93fe33baa6bc853528dc7179adf1eec852078c..3f0b9ae61d8cb710f39bbbe71ae3debbf0439f8e 100644 --- a/Documentation/ABI/testing/sysfs-block-zram +++ b/Documentation/ABI/testing/sysfs-block-zram @@ -5,20 +5,21 @@ Description: The disksize file is read-write and specifies the disk size which represents the limit on the *uncompressed* worth of data that can be stored in this disk. + Unit: bytes What: /sys/block/zram/initstate Date: August 2010 Contact: Nitin Gupta Description: - The disksize file is read-only and shows the initialization + The initstate file is read-only and shows the initialization state of the device. What: /sys/block/zram/reset Date: August 2010 Contact: Nitin Gupta Description: - The disksize file is write-only and allows resetting the - device. The reset operation frees all the memory assocaited + The reset file is write-only and allows resetting the + device. The reset operation frees all the memory associated with this device. What: /sys/block/zram/num_reads @@ -48,7 +49,7 @@ Contact: Nitin Gupta Description: The notify_free file is read-only and specifies the number of swap slot free notifications received by this device. These - notifications are send to a swap block device when a swap slot + notifications are sent to a swap block device when a swap slot is freed. This statistic is applicable only when this disk is being used as a swap disk. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index dda81ffae5cfb4b385eaf89c799f888268ce7148..39c8de0e53d00924630c789e27c9e6c10af5e960 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -351,6 +351,7 @@ Description: 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 20kohm_to_gnd: connected to ground via a 20kOhm resistor, 100kohm_to_gnd: connected to ground via an 100kOhm resistor, + 500kohm_to_gnd: connected to ground via a 500kOhm resistor, three_state: left floating. For a list of available output power down options read outX_powerdown_mode_available. If Y is not present the @@ -792,3 +793,21 @@ Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the amount of quadrature error present in the device at a given time. + +What: /sys/.../iio:deviceX/in_accelX_power_mode +KernelVersion: 3.11 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the chip power mode. + low_noise: reduce noise level from ADC, + low_power: enable low current consumption. + For a list of available output power modes read + in_accel_power_mode_available. + +What: /sys/bus/iio/devices/iio:deviceX/store_eeprom +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Writing '1' stores the current device configuration into + on-chip EEPROM. After power-up or chip reset the device will + automatically load the saved configuration. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 index 2ce9c3f68eeea771c36f73482411c089863c0391..a91aeabe7b244ff07a51bd1bd1ea935b6e7c7e4b 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 @@ -18,14 +18,6 @@ Description: Reading returns either '1' or '0'. '1' means that the pllY is locked. -What: /sys/bus/iio/devices/iio:deviceX/store_eeprom -KernelVersion: 3.4.0 -Contact: linux-iio@vger.kernel.org -Description: - Writing '1' stores the current device configuration into - on-chip EEPROM. After power-up or chip reset the device will - automatically load the saved configuration. - What: /sys/bus/iio/devices/iio:deviceX/sync_dividers KernelVersion: 3.4.0 Contact: linux-iio@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 index d89aded01c5ada788f32a0745dabcea3d7bfbe04..1254457a726e8550023f827688a381cd6c02ad60 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 @@ -18,4 +18,4 @@ Description: adjust the reference frequency accordingly. The value written has no effect until out_altvoltageY_frequency is updated. Consider to use out_altvoltageY_powerdown to power - down the PLL and it's RFOut buffers during REFin changes. + down the PLL and its RFOut buffers during REFin changes. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 9759b8c913329cde110754b84438133a4738dcd7..1430f584b266415296ba4b9f0b71428106b441d1 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -1,81 +1,3 @@ -What: /sys/bus/usb/devices/.../power/autosuspend -Date: March 2007 -KernelVersion: 2.6.21 -Contact: Alan Stern -Description: - Each USB device directory will contain a file named - power/autosuspend. This file holds the time (in seconds) - the device must be idle before it will be autosuspended. - 0 means the device will be autosuspended as soon as - possible. Negative values will prevent the device from - being autosuspended at all, and writing a negative value - will resume the device if it is already suspended. - - The autosuspend delay for newly-created devices is set to - the value of the usbcore.autosuspend module parameter. - -What: /sys/bus/usb/devices/.../power/persist -Date: May 2007 -KernelVersion: 2.6.23 -Contact: Alan Stern -Description: - If CONFIG_USB_PERSIST is set, then each USB device directory - will contain a file named power/persist. The file holds a - boolean value (0 or 1) indicating whether or not the - "USB-Persist" facility is enabled for the device. Since the - facility is inherently dangerous, it is disabled by default - for all devices except hubs. For more information, see - Documentation/usb/persist.txt. - -What: /sys/bus/usb/device/.../power/connected_duration -Date: January 2008 -KernelVersion: 2.6.25 -Contact: Sarah Sharp -Description: - If CONFIG_PM_RUNTIME is enabled then this file - is present. When read, it returns the total time (in msec) - that the USB device has been connected to the machine. This - file is read-only. -Users: - PowerTOP - http://www.lesswatts.org/projects/powertop/ - -What: /sys/bus/usb/device/.../power/active_duration -Date: January 2008 -KernelVersion: 2.6.25 -Contact: Sarah Sharp -Description: - If CONFIG_PM_RUNTIME is enabled then this file - is present. When read, it returns the total time (in msec) - that the USB device has been active, i.e. not in a suspended - state. This file is read-only. - - Tools can use this file and the connected_duration file to - compute the percentage of time that a device has been active. - For example, - echo $((100 * `cat active_duration` / `cat connected_duration`)) - will give an integer percentage. Note that this does not - account for counter wrap. -Users: - PowerTOP - http://www.lesswatts.org/projects/powertop/ - -What: /sys/bus/usb/device/-...:-/supports_autosuspend -Date: January 2008 -KernelVersion: 2.6.27 -Contact: Sarah Sharp -Description: - When read, this file returns 1 if the interface driver - for this interface supports autosuspend. It also - returns 1 if no driver has claimed this interface, as an - unclaimed interface will not stop the device from being - autosuspended if all other interface drivers are idle. - The file returns 0 if autosuspend support has not been - added to the driver. -Users: - USB PM tool - git://git.moblin.org/users/sarah/usb-pm-tool/ - What: /sys/bus/usb/device/.../authorized Date: July 2008 KernelVersion: 2.6.26 @@ -172,17 +94,6 @@ Description: device IDs, exactly like reading from the entry "/sys/bus/usb/drivers/.../new_id" -What: /sys/bus/usb/device/.../avoid_reset_quirk -Date: December 2009 -Contact: Oliver Neukum -Description: - Writing 1 to this file tells the kernel that this - device will morph into another mode when it is reset. - Drivers will not use reset for error handling for - such devices. -Users: - usb_modeswitch - What: /sys/bus/usb/devices/.../power/usb2_hardware_lpm Date: September 2011 Contact: Andiry Xu diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs new file mode 100644 index 0000000000000000000000000000000000000000..31942efcaf0e8cf6893c8c21e24bbb25ca75507a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -0,0 +1,26 @@ +What: /sys/fs/f2fs//gc_max_sleep_time +Date: July 2013 +Contact: "Namjae Jeon" +Description: + Controls the maximun sleep time for gc_thread. Time + is in milliseconds. + +What: /sys/fs/f2fs//gc_min_sleep_time +Date: July 2013 +Contact: "Namjae Jeon" +Description: + Controls the minimum sleep time for gc_thread. Time + is in milliseconds. + +What: /sys/fs/f2fs//gc_no_gc_sleep_time +Date: July 2013 +Contact: "Namjae Jeon" +Description: + Controls the default sleep time for gc_thread. Time + is in milliseconds. + +What: /sys/fs/f2fs//gc_idle +Date: July 2013 +Contact: "Namjae Jeon" +Description: + Controls the victim selection policy for garbage collection. diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 7d1278e7a4341603a4b8c8c84953ca95f8cc30e2..ed1d6d28902213178a22fa8e3dd2f16d91797c55 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -155,13 +155,6 @@ will become a fatal error. - - DRIVER_USE_MTRR - - Driver uses MTRR interface for mapping memory, the DRM core will - manage MTRR resources. Deprecated. - - DRIVER_PCI_DMA @@ -194,28 +187,6 @@ support shared IRQs (note that this is required of PCI drivers). - - DRIVER_IRQ_VBL - Unused. Deprecated. - - - DRIVER_DMA_QUEUE - - Should be set if the driver queues DMA requests and completes them - asynchronously. Deprecated. - - - - DRIVER_FB_DMA - - Driver supports DMA to/from the framebuffer, mapping of frambuffer - DMA buffers to userspace will be supported. Deprecated. - - - - DRIVER_IRQ_VBL2 - Unused. Deprecated. - DRIVER_GEM @@ -234,6 +205,12 @@ Driver implements DRM PRIME buffer sharing. + + DRIVER_RENDER + + Driver supports dedicated render nodes. + + @@ -2212,6 +2189,18 @@ void intel_crt_init(struct drm_device *dev) !Iinclude/drm/drm_rect.h !Edrivers/gpu/drm/drm_rect.c + + Flip-work Helper Reference +!Pinclude/drm/drm_flip_work.h flip utils +!Iinclude/drm/drm_flip_work.h +!Edrivers/gpu/drm/drm_flip_work.c + + + VMA Offset Manager +!Pdrivers/gpu/drm/drm_vma_manager.c vma offset manager +!Edrivers/gpu/drm/drm_vma_manager.c +!Iinclude/drm/drm_vma_manager.h + @@ -2422,18 +2411,18 @@ void (*postclose) (struct drm_device *, struct drm_file *); The firstopen method is called by the DRM core - when an application opens a device that has no other opened file handle. - Similarly the lastclose method is called when - the last application holding a file handle opened on the device closes - it. Both methods are mostly used for UMS (User Mode Setting) drivers to - acquire and release device resources which should be done in the - load and unload - methods for KMS drivers. + for legacy UMS (User Mode Setting) drivers only when an application + opens a device that has no other opened file handle. UMS drivers can + implement it to acquire device resources. KMS drivers can't use the + method and must acquire resources in the load + method instead. - Note that the lastclose method is also called - at module unload time or, for hot-pluggable devices, when the device is - unplugged. The firstopen and + Similarly the lastclose method is called when + the last application holding a file handle opened on the device closes + it, for both UMS and KMS drivers. Additionally, the method is also + called at module unload time or, for hot-pluggable devices, when the + device is unplugged. The firstopen and lastclose calls can thus be unbalanced. @@ -2462,7 +2451,12 @@ void (*postclose) (struct drm_device *, struct drm_file *); The lastclose method should restore CRTC and plane properties to default value, so that a subsequent open of the - device will not inherit state from the previous user. + device will not inherit state from the previous user. It can also be + used to execute delayed power switching state changes, e.g. in + conjunction with the vga-switcheroo infrastructure. Beyond that KMS + drivers should not do any further cleanup. Only legacy UMS drivers might + need to clean up device state so that the vga console or an independent + fbdev driver could take over. @@ -2498,7 +2492,6 @@ void (*postclose) (struct drm_device *, struct drm_file *); .poll = drm_poll, .read = drm_read, - .fasync = drm_fasync, .llseek = no_llseek, @@ -2657,6 +2650,69 @@ int (*resume) (struct drm_device *); info, since man pages should cover the rest. + + + + Render nodes + + DRM core provides multiple character-devices for user-space to use. + Depending on which device is opened, user-space can perform a different + set of operations (mainly ioctls). The primary node is always created + and called card<num>. Additionally, a currently + unused control node, called controlD<num> is also + created. The primary node provides all legacy operations and + historically was the only interface used by userspace. With KMS, the + control node was introduced. However, the planned KMS control interface + has never been written and so the control node stays unused to date. + + + With the increased use of offscreen renderers and GPGPU applications, + clients no longer require running compositors or graphics servers to + make use of a GPU. But the DRM API required unprivileged clients to + authenticate to a DRM-Master prior to getting GPU access. To avoid this + step and to grant clients GPU access without authenticating, render + nodes were introduced. Render nodes solely serve render clients, that + is, no modesetting or privileged ioctls can be issued on render nodes. + Only non-global rendering commands are allowed. If a driver supports + render nodes, it must advertise it via the DRIVER_RENDER + DRM driver capability. If not supported, the primary node must be used + for render clients together with the legacy drmAuth authentication + procedure. + + + If a driver advertises render node support, DRM core will create a + separate render node called renderD<num>. There will + be one render node per device. No ioctls except PRIME-related ioctls + will be allowed on this node. Especially GEM_OPEN will be + explicitly prohibited. Render nodes are designed to avoid the + buffer-leaks, which occur if clients guess the flink names or mmap + offsets on the legacy interface. Additionally to this basic interface, + drivers must mark their driver-dependent render-only ioctls as + DRM_RENDER_ALLOW so render clients can use them. Driver + authors must be careful not to allow any privileged ioctls on render + nodes. + + + With render nodes, user-space can now control access to the render node + via basic file-system access-modes. A running graphics server which + authenticates clients on the privileged primary/legacy node is no longer + required. Instead, a client can open the render node and is immediately + granted GPU access. Communication between clients (or servers) is done + via PRIME. FLINK from render node to legacy node is not supported. New + clients must not use the insecure FLINK interface. + + + Besides dropping all modeset/global ioctls, render nodes also drop the + DRM-Master concept. There is no reason to associate render clients with + a DRM-Master as they are independent of any graphics server. Besides, + they must work without any running master, anyway. + Drivers must be able to run without a master object if they support + render nodes. If, on the other hand, a driver requires shared state + between clients which is visible to user-space and accessible beyond + open-file boundaries, they cannot support render nodes. + + + diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index c2fc9ec1417ea43762f18c7d71c74ce7b71d8771..7a3b49b3cc3bafbb7f4a8892521e30700dd70496 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -722,17 +722,22 @@ for more details.
- MPEG Control Reference + Codec Control Reference - Below all controls within the MPEG control class are + Below all controls within the Codec control class are described. First the generic controls, then controls specific for certain hardware. + Note: These controls are applicable to all codecs and +not just MPEG. The defines are prefixed with V4L2_CID_MPEG/V4L2_MPEG +as the controls were originally made for MPEG codecs and later +extended to cover all encoding formats. +
- Generic MPEG Controls + Generic Codec Controls - MPEG Control IDs + Codec Control IDs @@ -752,7 +757,7 @@ certain hardware. V4L2_CID_MPEG_CLASS  class - The MPEG class + The Codec class descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a description of this control class. This description can be used as the caption of a Tab page in a GUI, for example. @@ -3009,6 +3014,159 @@ in by the application. 0 = do not insert, 1 = insert packets.
+ +
+ VPX Control Reference + + The VPX controls include controls for encoding parameters + of VPx video codec. + + + VPX Control IDs + + + + + + + + + + + ID + Type + Description + + + + + + + + V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS + enum v4l2_vp8_num_partitions + + The number of token partitions to use in VP8 encoder. +Possible values are: + + + + + + V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION + 1 coefficient partition + + + V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS + 2 coefficient partitions + + + V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS + 4 coefficient partitions + + + V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS + 8 coefficient partitions + + + + + + + + V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4 + boolean + + Setting this prevents intra 4x4 mode in the intra mode decision. + + + + + V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES + enum v4l2_vp8_num_ref_frames + + The number of reference pictures for encoding P frames. +Possible values are: + + + + + + V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME + Last encoded frame will be searched + + + V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME + Two frames will be searched among the last encoded frame, the golden frame +and the alternate reference (altref) frame. The encoder implementation will decide which two are chosen. + + + V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME + The last encoded frame, the golden frame and the altref frame will be searched. + + + + + + + + V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL + integer + + Indicates the loop filter level. The adjustment of the loop +filter level is done via a delta value against a baseline loop filter value. + + + + + V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS + integer + + This parameter affects the loop filter. Anything above +zero weakens the deblocking effect on the loop filter. + + + + + V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD + integer + + Sets the refresh period for the golden frame. The period is defined +in number of frames. For a value of 'n', every nth frame starting from the first key frame will be taken as a golden frame. +For eg. for encoding sequence of 0, 1, 2, 3, 4, 5, 6, 7 where the golden frame refresh period is set as 4, the frames +0, 4, 8 etc will be taken as the golden frames as frame 0 is always a key frame. + + + + + V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL + enum v4l2_vp8_golden_frame_sel + + Selects the golden frame for encoding. +Possible values are: + + + + + + V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV + Use the (n-2)th frame as a golden frame, current frame index being 'n'. + + + V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD + Use the previous specific frame indicated by +V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD as a golden frame. + + + + + + + + +
+ +
diff --git a/Documentation/DocBook/media/v4l/lirc_device_interface.xml b/Documentation/DocBook/media/v4l/lirc_device_interface.xml index 8d7eb6bf6312f4934c613912b7930d127c12956a..34cada2ca71038694f11faa3f1060fe641b12bd1 100644 --- a/Documentation/DocBook/media/v4l/lirc_device_interface.xml +++ b/Documentation/DocBook/media/v4l/lirc_device_interface.xml @@ -46,7 +46,9 @@ describing an IR signal are read from the chardev. values. Pulses and spaces are only marked implicitly by their position. The data must start and end with a pulse, therefore, the data must always include an uneven number of samples. The write function must block until the data has -been transmitted by the hardware. +been transmitted by the hardware. If more data is provided than the hardware +can send, the driver returns EINVAL. +
diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv16m.xml b/Documentation/DocBook/media/v4l/pixfmt-nv16m.xml new file mode 100644 index 0000000000000000000000000000000000000000..c51d5a4cda091f795beba7316498431a7defcc63 --- /dev/null +++ b/Documentation/DocBook/media/v4l/pixfmt-nv16m.xml @@ -0,0 +1,171 @@ + + + V4L2_PIX_FMT_NV16M ('NM16'), V4L2_PIX_FMT_NV61M ('NM61') + &manvol; + + + V4L2_PIX_FMT_NV16M + V4L2_PIX_FMT_NV61M + Variation of V4L2_PIX_FMT_NV16 and V4L2_PIX_FMT_NV61 with planes + non contiguous in memory. + + + Description + + This is a multi-planar, two-plane version of the YUV 4:2:0 format. +The three components are separated into two sub-images or planes. +V4L2_PIX_FMT_NV16M differs from V4L2_PIX_FMT_NV16 + in that the two planes are non-contiguous in memory, i.e. the chroma +plane does not necessarily immediately follows the luma plane. +The luminance data occupies the first plane. The Y plane has one byte per pixel. +In the second plane there is chrominance data with alternating chroma samples. +The CbCr plane is the same width and height, in bytes, as the Y plane. +Each CbCr pair belongs to four pixels. For example, +Cb0/Cr0 belongs to +Y'00, Y'01, +Y'10, Y'11. +V4L2_PIX_FMT_NV61M is the same as V4L2_PIX_FMT_NV16M +except the Cb and Cr bytes are swapped, the CrCb plane starts with a Cr byte. + + V4L2_PIX_FMT_NV16M and +V4L2_PIX_FMT_NV61M are intended to be used only in drivers +and applications that support the multi-planar API, described in +. + + + <constant>V4L2_PIX_FMT_NV16M</constant> 4 × 4 pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start0 + 0: + Y'00 + Y'01 + Y'02 + Y'03 + + + start0 + 4: + Y'10 + Y'11 + Y'12 + Y'13 + + + start0 + 8: + Y'20 + Y'21 + Y'22 + Y'23 + + + start0 + 12: + Y'30 + Y'31 + Y'32 + Y'33 + + + + + + start1 + 0: + Cb00 + Cr00 + Cb02 + Cr02 + + + start1 + 4: + Cb10 + Cr10 + Cb12 + Cr12 + + + start1 + 8: + Cb20 + Cr20 + Cb22 + Cr22 + + + start1 + 12: + Cb30 + Cr30 + Cb32 + Cr32 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YY + YY + + + + C + C + + + 1 + YY + YY + + + + C + C + + + + + + 2 + YY + YY + + + + C + C + + + 3 + YY + YY + + + + C + C + + + + + + + + + diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml index 99b8d2ad6e4ff1613db6a789c0228afde61318b5..72d72bd67d0a9eb00836b5495a0b9e6c4821d5f3 100644 --- a/Documentation/DocBook/media/v4l/pixfmt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt.xml @@ -391,9 +391,9 @@ clamp (double x) else return r; } -y1 = (255 / 219.0) * (Y1 - 16); -pb = (255 / 224.0) * (Cb - 128); -pr = (255 / 224.0) * (Cr - 128); +y1 = (Y1 - 16) / 219.0; +pb = (Cb - 128) / 224.0; +pr = (Cr - 128) / 224.0; r = 1.0 * y1 + 0 * pb + 1.402 * pr; g = 1.0 * y1 - 0.344 * pb - 0.714 * pr; @@ -718,6 +718,7 @@ information. &sub-nv12m; &sub-nv12mt; &sub-nv16; + &sub-nv16m; &sub-nv24; &sub-m420;
diff --git a/Documentation/DocBook/media/v4l/subdev-formats.xml b/Documentation/DocBook/media/v4l/subdev-formats.xml index adc61982df7b239ebd0f0db20e35185171e2c6d3..f72c1cc93a9b0d6aa8b888afb7f80393620f9bda 100644 --- a/Documentation/DocBook/media/v4l/subdev-formats.xml +++ b/Documentation/DocBook/media/v4l/subdev-formats.xml @@ -97,31 +97,39 @@ - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Identifier @@ -133,6 +141,14 @@ Bit + 31 + 30 + 29 + 28 + 27 + 26 + 25 + 24 23 22 21 @@ -164,7 +180,7 @@ V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE 0x1001 - &dash-ent-16; + &dash-ent-24; 0 0 0 @@ -178,7 +194,7 @@ - &dash-ent-16; + &dash-ent-24; g3 g2 g1 @@ -192,7 +208,7 @@ V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE 0x1002 - &dash-ent-16; + &dash-ent-24; g3 g2 g1 @@ -206,7 +222,7 @@ - &dash-ent-16; + &dash-ent-24; 0 0 0 @@ -220,7 +236,7 @@ V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE 0x1003 - &dash-ent-16; + &dash-ent-24; 0 r4 r3 @@ -234,7 +250,7 @@ - &dash-ent-16; + &dash-ent-24; g2 g1 g0 @@ -248,7 +264,7 @@ V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE 0x1004 - &dash-ent-16; + &dash-ent-24; g2 g1 g0 @@ -262,7 +278,7 @@ - &dash-ent-16; + &dash-ent-24; 0 r4 r3 @@ -276,7 +292,7 @@ V4L2_MBUS_FMT_BGR565_2X8_BE 0x1005 - &dash-ent-16; + &dash-ent-24; b4 b3 b2 @@ -290,7 +306,7 @@ - &dash-ent-16; + &dash-ent-24; g2 g1 g0 @@ -304,7 +320,7 @@ V4L2_MBUS_FMT_BGR565_2X8_LE 0x1006 - &dash-ent-16; + &dash-ent-24; g2 g1 g0 @@ -318,7 +334,7 @@ - &dash-ent-16; + &dash-ent-24; b4 b3 b2 @@ -332,7 +348,7 @@ V4L2_MBUS_FMT_RGB565_2X8_BE 0x1007 - &dash-ent-16; + &dash-ent-24; r4 r3 r2 @@ -346,7 +362,7 @@ - &dash-ent-16; + &dash-ent-24; g2 g1 g0 @@ -360,7 +376,7 @@ V4L2_MBUS_FMT_RGB565_2X8_LE 0x1008 - &dash-ent-16; + &dash-ent-24; g2 g1 g0 @@ -374,7 +390,7 @@ - &dash-ent-16; + &dash-ent-24; r4 r3 r2 @@ -388,12 +404,7 @@ V4L2_MBUS_FMT_RGB666_1X18 0x1009 - - - - - - - - - - - - + &dash-ent-14; r5 r4 r3 @@ -417,6 +428,7 @@ V4L2_MBUS_FMT_RGB888_1X24 0x100a + &dash-ent-8; r7 r6 r5 @@ -446,9 +458,7 @@ V4L2_MBUS_FMT_RGB888_2X12_BE 0x100b - &dash-ent-10; - - - - + &dash-ent-20; r7 r6 r5 @@ -466,9 +476,7 @@ - &dash-ent-10; - - - - + &dash-ent-20; g3 g2 g1 @@ -486,9 +494,7 @@ V4L2_MBUS_FMT_RGB888_2X12_LE 0x100c - &dash-ent-10; - - - - + &dash-ent-20; g3 g2 g1 @@ -506,9 +512,7 @@ - &dash-ent-10; - - - - + &dash-ent-20; r7 r6 r5 @@ -522,6 +526,43 @@ g5 g4 + + V4L2_MBUS_FMT_ARGB888_1X32 + 0x100d + + a7 + a6 + a5 + a4 + a3 + a2 + a1 + a0 + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + @@ -1149,6 +1190,7 @@ yx for luma component bit number x ux for blue chroma component bit number x vx for red chroma component bit number x + ax for alpha component bit number x - for non-available bits (for positions higher than the bus width) d for dummy bits @@ -1159,37 +1201,39 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Identifier @@ -1201,6 +1245,8 @@ Bit + 31 + 30 29 28 27 @@ -1238,10 +1284,7 @@ V4L2_MBUS_FMT_Y8_1X8 0x2001 - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1255,18 +1298,7 @@ V4L2_MBUS_FMT_UV8_1X8 0x2015 - - - - - - - - - - - - - - - - - - - - - - - - + &dash-ent-24; u7 u6 u5 @@ -1280,18 +1312,7 @@ - - - - - - - - - - - - - - - - - - - - - - - - + &dash-ent-24; v7 v6 v5 @@ -1305,10 +1326,7 @@ V4L2_MBUS_FMT_UYVY8_1_5X8 0x2002 - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; u7 u6 u5 @@ -1322,10 +1340,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1339,10 +1354,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1356,10 +1368,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; v7 v6 v5 @@ -1373,10 +1382,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1390,10 +1396,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1407,10 +1410,7 @@ V4L2_MBUS_FMT_VYUY8_1_5X8 0x2003 - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; v7 v6 v5 @@ -1424,10 +1424,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1441,10 +1438,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1458,10 +1452,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; u7 u6 u5 @@ -1475,10 +1466,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1492,10 +1480,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1509,10 +1494,7 @@ V4L2_MBUS_FMT_YUYV8_1_5X8 0x2004 - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1526,10 +1508,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1543,10 +1522,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; u7 u6 u5 @@ -1560,10 +1536,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1577,10 +1550,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1594,10 +1564,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; v7 v6 v5 @@ -1611,10 +1578,7 @@ V4L2_MBUS_FMT_YVYU8_1_5X8 0x2005 - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1628,10 +1592,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1645,10 +1606,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; v7 v6 v5 @@ -1662,10 +1620,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1679,10 +1634,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1696,10 +1648,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; u7 u6 u5 @@ -1713,10 +1662,7 @@ V4L2_MBUS_FMT_UYVY8_2X8 0x2006 - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; u7 u6 u5 @@ -1730,10 +1676,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1747,10 +1690,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; v7 v6 v5 @@ -1764,10 +1704,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1781,10 +1718,7 @@ V4L2_MBUS_FMT_VYUY8_2X8 0x2007 - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; v7 v6 v5 @@ -1798,10 +1732,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1815,10 +1746,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; u7 u6 u5 @@ -1832,10 +1760,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1849,10 +1774,7 @@ V4L2_MBUS_FMT_YUYV8_2X8 0x2008 - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1866,10 +1788,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; u7 u6 u5 @@ -1883,10 +1802,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1900,10 +1816,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; v7 v6 v5 @@ -1917,10 +1830,7 @@ V4L2_MBUS_FMT_YVYU8_2X8 0x2009 - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1934,10 +1844,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; v7 v6 v5 @@ -1951,10 +1858,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; y7 y6 y5 @@ -1968,10 +1872,7 @@ - &dash-ent-10; - &dash-ent-10; - - - - + &dash-ent-24; u7 u6 u5 @@ -1985,8 +1886,7 @@ V4L2_MBUS_FMT_Y10_1X10 0x200a - &dash-ent-10; - &dash-ent-10; + &dash-ent-22; y9 y8 y7 @@ -2002,8 +1902,7 @@ V4L2_MBUS_FMT_YUYV10_2X10 0x200b - &dash-ent-10; - &dash-ent-10; + &dash-ent-22; y9 y8 y7 @@ -2019,8 +1918,7 @@ - &dash-ent-10; - &dash-ent-10; + &dash-ent-22; u9 u8 u7 @@ -2036,8 +1934,7 @@ - &dash-ent-10; - &dash-ent-10; + &dash-ent-22; y9 y8 y7 @@ -2053,8 +1950,7 @@ - &dash-ent-10; - &dash-ent-10; + &dash-ent-22; v9 v8 v7 @@ -2070,8 +1966,7 @@ V4L2_MBUS_FMT_YVYU10_2X10 0x200c - &dash-ent-10; - &dash-ent-10; + &dash-ent-22; y9 y8 y7 @@ -2087,8 +1982,7 @@ - &dash-ent-10; - &dash-ent-10; + &dash-ent-22; v9 v8 v7 @@ -2104,8 +1998,7 @@ - &dash-ent-10; - &dash-ent-10; + &dash-ent-22; y9 y8 y7 @@ -2121,8 +2014,7 @@ - &dash-ent-10; - &dash-ent-10; + &dash-ent-22; u9 u8 u7 @@ -2138,15 +2030,7 @@ V4L2_MBUS_FMT_Y12_1X12 0x2013 - &dash-ent-10; - - - - - - - - - - - - - - - - + &dash-ent-20; y11 y10 y9 @@ -2164,11 +2048,7 @@ V4L2_MBUS_FMT_UYVY8_1X16 0x200f - &dash-ent-10; - - - - - - - - + &dash-ent-16; u7 u6 u5 @@ -2190,11 +2070,7 @@ - &dash-ent-10; - - - - - - - - + &dash-ent-16; v7 v6 v5 @@ -2216,11 +2092,7 @@ V4L2_MBUS_FMT_VYUY8_1X16 0x2010 - &dash-ent-10; - - - - - - - - + &dash-ent-16; v7 v6 v5 @@ -2242,11 +2114,7 @@ - &dash-ent-10; - - - - - - - - + &dash-ent-16; u7 u6 u5 @@ -2268,11 +2136,7 @@ V4L2_MBUS_FMT_YUYV8_1X16 0x2011 - &dash-ent-10; - - - - - - - - + &dash-ent-16; y7 y6 y5 @@ -2294,11 +2158,7 @@ - &dash-ent-10; - - - - - - - - + &dash-ent-16; y7 y6 y5 @@ -2320,11 +2180,7 @@ V4L2_MBUS_FMT_YVYU8_1X16 0x2012 - &dash-ent-10; - - - - - - - - + &dash-ent-16; y7 y6 y5 @@ -2346,11 +2202,7 @@ - &dash-ent-10; - - - - - - - - + &dash-ent-16; y7 y6 y5 @@ -2372,10 +2224,7 @@ V4L2_MBUS_FMT_YDYUYDYV8_1X16 0x2014 - - - - - - - - + &dash-ent-16; y7 y6 y5 @@ -2397,10 +2246,7 @@ - - - - - - - - + &dash-ent-16; y7 y6 y5 @@ -2422,10 +2268,7 @@ - - - - - - - - + &dash-ent-16; y7 y6 y5 @@ -2447,10 +2290,7 @@ - - - - - - - - + &dash-ent-16; y7 y6 y5 @@ -2472,7 +2312,7 @@ V4L2_MBUS_FMT_YUYV10_1X20 0x200d - &dash-ent-10; + &dash-ent-12; y9 y8 y7 @@ -2498,7 +2338,7 @@ - &dash-ent-10; + &dash-ent-12; y9 y8 y7 @@ -2524,7 +2364,7 @@ V4L2_MBUS_FMT_YVYU10_1X20 0x200e - &dash-ent-10; + &dash-ent-12; y9 y8 y7 @@ -2550,7 +2390,7 @@ - &dash-ent-10; + &dash-ent-12; y9 y8 y7 @@ -2574,8 +2414,10 @@ V4L2_MBUS_FMT_YUV10_1X30 - 0x2014 + 0x2016 + - + - y9 y8 y7 @@ -2607,6 +2449,43 @@ v1 v0 + + V4L2_MBUS_FMT_AYUV8_1X32 + 0x2017 + + a7 + a6 + a5 + a4 + a3 + a2 + a1 + a0 + y7 + y6 + y5 + y4 + y3 + y2 + y1 + y0 + u7 + u6 + u5 + u4 + u3 + u2 + u1 + u0 + v7 + v6 + v5 + v4 + v3 + v2 + v1 + v0 + diff --git a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml index cd9943672434e29b629bf5a46e5aa42749008171..9b700a5f4df76406a88f14fc1cf8c0276b44af48 100644 --- a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml +++ b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml @@ -62,18 +62,29 @@ addition to the VIDIOC_REQBUFS ioctl, when a tighter control over buffers is required. This ioctl can be called multiple times to create buffers of different sizes. - To allocate device buffers applications initialize relevant fields of -the v4l2_create_buffers structure. They set the -type field in the -&v4l2-format; structure, embedded in this -structure, to the respective stream or buffer type. -count must be set to the number of required buffers. -memory specifies the required I/O method. The -format field shall typically be filled in using -either the VIDIOC_TRY_FMT or -VIDIOC_G_FMT ioctl(). Additionally, applications can adjust -sizeimage fields to fit their specific needs. The -reserved array must be zeroed. + To allocate the device buffers applications must initialize the +relevant fields of the v4l2_create_buffers structure. +The count field must be set to the number of +requested buffers, the memory field specifies the +requested I/O method and the reserved array must be +zeroed. + + The format field specifies the image format +that the buffers must be able to handle. The application has to fill in this +&v4l2-format;. Usually this will be done using the +VIDIOC_TRY_FMT or VIDIOC_G_FMT ioctl() +to ensure that the requested format is supported by the driver. Unsupported +formats will result in an error. + + The buffers created by this ioctl will have as minimum size the size +defined by the format.pix.sizeimage field. If the +format.pix.sizeimage field is less than the minimum +required for the given format, then sizeimage will be +increased by the driver to that minimum to allocate the buffers. If it is +larger, then the value will be used as-is. The same applies to the +sizeimage field of the +v4l2_plane_pix_format structure in the case of +multiplanar formats. When the ioctl is called with a pointer to this structure the driver will attempt to allocate up to the requested number of buffers and store the @@ -144,9 +155,9 @@ mapped I/O. EINVAL - The buffer type (type field) or the -requested I/O method (memory) is not -supported. + The buffer type (format.type field), +requested I/O method (memory) or format +(format field) is not valid. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml index 72369707bd77d00bd78e1546f2d8c17a1e6c0ae8..c4336577ff066a34ba7149ffde35e5e93ed2ef2c 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml @@ -156,19 +156,19 @@ bit 0 (V4L2_DV_VSYNC_POS_POL) is for vertical sync polarity and bit 1 (V4L2_DV_H __u32 il_vfrontporch Vertical front porch in lines for the even field (aka field 2) of - interlaced field formats. + interlaced field formats. Must be 0 for progressive formats. __u32 il_vsync Vertical sync length in lines for the even field (aka field 2) of - interlaced field formats. + interlaced field formats. Must be 0 for progressive formats. __u32 il_vbackporch Vertical back porch in lines for the even field (aka field 2) of - interlaced field formats. + interlaced field formats. Must be 0 for progressive formats. __u32 diff --git a/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml b/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml index 48748499c097516e9ac39b2e8584eb5a8e92c0f2..098ff483802e6094b09b62f29c85545ab0df5cc3 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml @@ -92,8 +92,8 @@ to add them. int quality Deprecated. If - V4L2_CID_JPEG_IMAGE_QUALITY control is exposed by - a driver applications should use it instead and ignore this field. + V4L2_CID_JPEG_COMPRESSION_QUALITY control is exposed + by a driver applications should use it instead and ignore this field. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml index 9058224d1bbfff9c9bcbb71ca017793569a92941..f4e28e7d4751224f1d398bb4873ee8cff73679a8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml @@ -132,7 +132,7 @@ devices. &v4l2-fract; timeperframe - This is is the desired period between + This is the desired period between successive frames captured by the driver, in seconds. The field is intended to skip frames on the driver side, saving I/O bandwidth.Applications store here the desired frame @@ -193,7 +193,7 @@ applications must set the array to zero. &v4l2-fract; timeperframe - This is is the desired period between + This is the desired period between successive frames output by the driver, in seconds. diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl index 9c92bb879b6dc7b1468e247ae0dbb026ad519f2f..4c8d282545a2e23cdcdda177df711835d31082a6 100644 --- a/Documentation/DocBook/media_api.tmpl +++ b/Documentation/DocBook/media_api.tmpl @@ -22,8 +22,14 @@ http://linuxtv.org/repo/"> +--------"> ----------"> +------------"> +--------------"> ----------------"> +--------------------"> +----------------------"> +------------------------"> ]> diff --git a/Documentation/IRQ-affinity.txt b/Documentation/IRQ-affinity.txt index 7890fae18529e3473700528a10f65d6ffd6f0533..01a675175a3674ef88a08ebb4f430dca3a4e4ec2 100644 --- a/Documentation/IRQ-affinity.txt +++ b/Documentation/IRQ-affinity.txt @@ -57,8 +57,8 @@ i.e counters for the CPU0-3 did not change. Here is an example of limiting that same irq (44) to cpus 1024 to 1031: -[root@moon 44]# echo 1024-1031 > smp_affinity -[root@moon 44]# cat smp_affinity +[root@moon 44]# echo 1024-1031 > smp_affinity_list +[root@moon 44]# cat smp_affinity_list 1024-1031 Note that to do this with a bitmask would require 32 bitmasks of zero diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt index 7f40c72a9c515078afe5fa2b0c7da2d09cebfedb..273e654d7d086531ae958e16af780d7a0d1404d1 100644 --- a/Documentation/RCU/RTFP.txt +++ b/Documentation/RCU/RTFP.txt @@ -39,7 +39,7 @@ in read-mostly situations. This algorithm does take pains to avoid write-side contention and parallelize the other write-side overheads by providing a fine-grained locking design, however, it would be interesting to see how much of the performance advantage reported in 1990 remains -in 2004. +today. At about this same time, Adams [Adams91] described ``chaotic relaxation'', where the normal barriers between successive iterations of convergent @@ -86,9 +86,9 @@ DYNIX/ptx kernel. The corresponding conference paper appeared in 1998 [McKenney98]. In 1999, the Tornado and K42 groups described their "generations" -mechanism, which quite similar to RCU [Gamsa99]. These operating systems -made pervasive use of RCU in place of "existence locks", which greatly -simplifies locking hierarchies. +mechanism, which is quite similar to RCU [Gamsa99]. These operating +systems made pervasive use of RCU in place of "existence locks", which +greatly simplifies locking hierarchies and helps avoid deadlocks. 2001 saw the first RCU presentation involving Linux [McKenney01a] at OLS. The resulting abundance of RCU patches was presented the @@ -106,8 +106,11 @@ these techniques still impose significant read-side overhead in the form of memory barriers. Researchers at Sun worked along similar lines in the same timeframe [HerlihyLM02]. These techniques can be thought of as inside-out reference counts, where the count is represented by the -number of hazard pointers referencing a given data structure (rather than -the more conventional counter field within the data structure itself). +number of hazard pointers referencing a given data structure rather than +the more conventional counter field within the data structure itself. +The key advantage of inside-out reference counts is that they can be +stored in immortal variables, thus allowing races between access and +deletion to be avoided. By the same token, RCU can be thought of as a "bulk reference count", where some form of reference counter covers all reference by a given CPU @@ -179,7 +182,25 @@ tree using software transactional memory to protect concurrent updates (strange, but true!) [PhilHoward2011RCUTMRBTree], yet another variant of RCU-protected resizeable hash tables [Triplett:2011:RPHash], the 3.0 RCU trainwreck [PaulEMcKenney2011RCU3.0trainwreck], and Neil Brown's "Meet the -Lockers" LWN article [NeilBrown2011MeetTheLockers]. +Lockers" LWN article [NeilBrown2011MeetTheLockers]. Some academic +work looked at debugging uses of RCU [Seyster:2011:RFA:2075416.2075425]. + +In 2012, Josh Triplett received his Ph.D. with his dissertation +covering RCU-protected resizable hash tables and the relationship +between memory barriers and read-side traversal order: If the updater +is making changes in the opposite direction from the read-side traveral +order, the updater need only execute a memory-barrier instruction, +but if in the same direction, the updater needs to wait for a grace +period between the individual updates [JoshTriplettPhD]. Also in 2012, +after seventeen years of attempts, an RCU paper made it into a top-flight +academic journal, IEEE Transactions on Parallel and Distributed Systems +[MathieuDesnoyers2012URCU]. A group of researchers in Spain applied +user-level RCU to crowd simulation [GuillermoVigueras2012RCUCrowd], and +another group of researchers in Europe produced a formal description of +RCU based on separation logic [AlexeyGotsman2012VerifyGraceExtended], +which was published in the 2013 European Symposium on Programming +[AlexeyGotsman2013ESOPRCU]. + Bibtex Entries @@ -193,13 +214,12 @@ Bibtex Entries ,volume="5" ,number="3" ,pages="354-382" -,note="Available: -\url{http://portal.acm.org/citation.cfm?id=320619&dl=GUIDE,} -[Viewed December 3, 2007]" ,annotation={ Use garbage collector to clean up data after everyone is done with it. . Oldest use of something vaguely resembling RCU that I have found. + http://portal.acm.org/citation.cfm?id=320619&dl=GUIDE, + [Viewed December 3, 2007] } } @@ -309,7 +329,7 @@ for Programming Languages and Operating Systems}" ,doi = {http://doi.acm.org/10.1145/42392.42399} ,publisher = {ACM} ,address = {New York, NY, USA} -,annotation= { +,annotation={ At the top of page 307: "Conflicts with deposits and withdrawals are necessary if the reported total is to be up to date. They could be avoided by having total return a sum that is slightly @@ -346,8 +366,9 @@ for Programming Languages and Operating Systems}" } } -@Book{Adams91 -,Author="Gregory R. Adams" +# Was Adams91, see also syncrefs.bib. +@Book{Andrews91textbook +,Author="Gregory R. Andrews" ,title="Concurrent Programming, Principles, and Practices" ,Publisher="Benjamin Cummins" ,Year="1991" @@ -398,39 +419,39 @@ for Programming Languages and Operating Systems}" } } -@conference{Pu95a, -Author = "Calton Pu and Tito Autrey and Andrew Black and Charles Consel and +@conference{Pu95a +,Author = "Calton Pu and Tito Autrey and Andrew Black and Charles Consel and Crispin Cowan and Jon Inouye and Lakshmi Kethana and Jonathan Walpole and -Ke Zhang", -Title = "Optimistic Incremental Specialization: Streamlining a Commercial -Operating System", -Booktitle = "15\textsuperscript{th} ACM Symposium on -Operating Systems Principles (SOSP'95)", -address = "Copper Mountain, CO", -month="December", -year="1995", -pages="314-321", -annotation=" +Ke Zhang" +,Title = "Optimistic Incremental Specialization: Streamlining a Commercial +,Operating System" +,Booktitle = "15\textsuperscript{th} ACM Symposium on +,Operating Systems Principles (SOSP'95)" +,address = "Copper Mountain, CO" +,month="December" +,year="1995" +,pages="314-321" +,annotation={ Uses a replugger, but with a flag to signal when people are using the resource at hand. Only one reader at a time. -" -} - -@conference{Cowan96a, -Author = "Crispin Cowan and Tito Autrey and Charles Krasic and -Calton Pu and Jonathan Walpole", -Title = "Fast Concurrent Dynamic Linking for an Adaptive Operating System", -Booktitle = "International Conference on Configurable Distributed Systems -(ICCDS'96)", -address = "Annapolis, MD", -month="May", -year="1996", -pages="108", -isbn="0-8186-7395-8", -annotation=" +} +} + +@conference{Cowan96a +,Author = "Crispin Cowan and Tito Autrey and Charles Krasic and +,Calton Pu and Jonathan Walpole" +,Title = "Fast Concurrent Dynamic Linking for an Adaptive Operating System" +,Booktitle = "International Conference on Configurable Distributed Systems +(ICCDS'96)" +,address = "Annapolis, MD" +,month="May" +,year="1996" +,pages="108" +,isbn="0-8186-7395-8" +,annotation={ Uses a replugger, but with a counter to signal when people are using the resource at hand. Allows multiple readers. -" +} } @techreport{Slingwine95 @@ -493,14 +514,13 @@ Problems" ,Year="1998" ,pages="509-518" ,Address="Las Vegas, NV" -,note="Available: -\url{http://www.rdrop.com/users/paulmck/RCU/rclockpdcsproof.pdf} -[Viewed December 3, 2007]" ,annotation={ Describes and analyzes RCU mechanism in DYNIX/ptx. Describes application to linked list update and log-buffer flushing. Defines 'quiescent state'. Includes both measured and analytic evaluation. + http://www.rdrop.com/users/paulmck/RCU/rclockpdcsproof.pdf + [Viewed December 3, 2007] } } @@ -514,13 +534,12 @@ Operating System Design and Implementation}" ,Year="1999" ,pages="87-100" ,Address="New Orleans, LA" -,note="Available: -\url{http://www.usenix.org/events/osdi99/full_papers/gamsa/gamsa.pdf} -[Viewed August 30, 2006]" ,annotation={ Use of RCU-like facility in K42/Tornado. Another independent invention of RCU. See especially pages 7-9 (Section 5). + http://www.usenix.org/events/osdi99/full_papers/gamsa/gamsa.pdf + [Viewed August 30, 2006] } } @@ -611,9 +630,9 @@ Orran Krieger and Rusty Russell and Dipankar Sarma and Maneesh Soni" ,note="Available: \url{http://marc.theaimsgroup.com/?l=linux-kernel&m=100259266316456&w=2} [Viewed June 23, 2004]" -,annotation=" +,annotation={ Memory-barrier and Alpha thread. 100 messages, not too bad... -" +} } @unpublished{Spraul01 @@ -624,10 +643,10 @@ Orran Krieger and Rusty Russell and Dipankar Sarma and Maneesh Soni" ,note="Available: \url{http://marc.theaimsgroup.com/?l=linux-kernel&m=100264675012867&w=2} [Viewed June 23, 2004]" -,annotation=" +,annotation={ Suggested burying memory barriers in Linux's list-manipulation primitives. -" +} } @unpublished{LinusTorvalds2001a @@ -638,6 +657,8 @@ Orran Krieger and Rusty Russell and Dipankar Sarma and Maneesh Soni" ,note="Available: \url{http://lkml.org/lkml/2001/10/13/105} [Viewed August 21, 2004]" +,annotation={ +} } @unpublished{Blanchard02a @@ -657,10 +678,10 @@ Orran Krieger and Rusty Russell and Dipankar Sarma and Maneesh Soni" ,Month="June" ,Year="2002" ,pages="289-300" -,annotation=" +,annotation={ Measured scalability of Linux 2.4 kernel's directory-entry cache (dcache), and measured some scalability enhancements. -" +} } @Conference{McKenney02a @@ -674,10 +695,10 @@ Andrea Arcangeli and Andi Kleen and Orran Krieger and Rusty Russell" ,note="Available: \url{http://www.linux.org.uk/~ajh/ols2002_proceedings.pdf.gz} [Viewed June 23, 2004]" -,annotation=" +,annotation={ Presented and compared a number of RCU implementations for the Linux kernel. -" +} } @unpublished{Sarma02a @@ -688,9 +709,9 @@ Andrea Arcangeli and Andi Kleen and Orran Krieger and Rusty Russell" ,note="Available: \url{http://marc.theaimsgroup.com/?l=linux-kernel&m=102645767914212&w=2} [Viewed June 23, 2004]" -,annotation=" +,annotation={ Compare fastwalk and RCU for dcache. RCU won. -" +} } @unpublished{Barbieri02 @@ -701,9 +722,9 @@ Andrea Arcangeli and Andi Kleen and Orran Krieger and Rusty Russell" ,note="Available: \url{http://marc.theaimsgroup.com/?l=linux-kernel&m=103082050621241&w=2} [Viewed: June 23, 2004]" -,annotation=" +,annotation={ Suggested RCU for vfs\_shared\_cred. -" +} } @unpublished{Dickins02a @@ -722,10 +743,10 @@ Andrea Arcangeli and Andi Kleen and Orran Krieger and Rusty Russell" ,note="Available: \url{http://marc.theaimsgroup.com/?l=linux-kernel&m=103462075416638&w=2} [Viewed June 23, 2004]" -,annotation=" +,annotation={ Performance of dcache RCU on kernbench for 16x NUMA-Q and 1x, 2x, and 4x systems. RCU does no harm, and helps on 16x. -" +} } @unpublished{LinusTorvalds2003a @@ -736,14 +757,14 @@ Andrea Arcangeli and Andi Kleen and Orran Krieger and Rusty Russell" ,note="Available: \url{http://lkml.org/lkml/2003/3/9/205} [Viewed March 13, 2006]" -,annotation=" +,annotation={ Linus suggests replacing brlock with RCU and/or seqlocks: . 'It's entirely possible that the current user could be replaced by RCU and/or seqlocks, and we could get rid of brlocks entirely.' . Steve Hemminger responds by replacing them with RCU. -" +} } @article{Appavoo03a @@ -758,9 +779,9 @@ B. Rosenburg and M. Stumm and J. Xenidis" ,volume="42" ,number="1" ,pages="60-76" -,annotation=" +,annotation={ Use of RCU to enable hot-swapping for autonomic behavior in K42. -" +} } @unpublished{Seigh03 @@ -769,9 +790,9 @@ B. Rosenburg and M. Stumm and J. Xenidis" ,Year="2003" ,Month="March" ,note="email correspondence" -,annotation=" +,annotation={ Described the relationship of the VM/XA passive serialization to RCU. -" +} } @Conference{Arcangeli03 @@ -785,14 +806,12 @@ Dipankar Sarma" ,year="2003" ,month="June" ,pages="297-310" -,note="Available: -\url{http://www.rdrop.com/users/paulmck/RCU/rcu.FREENIX.2003.06.14.pdf} -[Viewed November 21, 2007]" -,annotation=" +,annotation={ Compared updated RCU implementations for the Linux kernel, and described System V IPC use of RCU, including order-of-magnitude performance improvements. -" + http://www.rdrop.com/users/paulmck/RCU/rcu.FREENIX.2003.06.14.pdf +} } @Conference{Soules03a @@ -820,10 +839,10 @@ Michal Ostrowski and Bryan Rosenburg and Jimi Xenidis" ,note="Available: \url{http://www.linuxjournal.com/article/6993} [Viewed November 14, 2007]" -,annotation=" +,annotation={ Reader-friendly intro to RCU, with the infamous old-man-and-brat cartoon. -" +} } @unpublished{Sarma03a @@ -832,7 +851,9 @@ Michal Ostrowski and Bryan Rosenburg and Jimi Xenidis" ,month="December" ,year="2003" ,note="Message ID: 20031222180114.GA2248@in.ibm.com" -,annotation="dipankar/ct.2004.03.27/RCUll.2003.12.22.patch" +,annotation={ + dipankar/ct.2004.03.27/RCUll.2003.12.22.patch +} } @techreport{Friedberg03a @@ -844,11 +865,11 @@ Michal Ostrowski and Bryan Rosenburg and Jimi Xenidis" ,number="US Patent 6,662,184" ,month="December" ,pages="112" -,annotation=" +,annotation={ Applies RCU to a wildcard-search Patricia tree in order to permit synchronization-free lookup. RCU is used to retain removed nodes for a grace period before freeing them. -" +} } @article{McKenney04a @@ -860,12 +881,11 @@ Michal Ostrowski and Bryan Rosenburg and Jimi Xenidis" ,volume="1" ,number="118" ,pages="38-46" -,note="Available: -\url{http://www.linuxjournal.com/node/7124} -[Viewed December 26, 2010]" -,annotation=" +,annotation={ Reader friendly intro to dcache and RCU. -" + http://www.linuxjournal.com/node/7124 + [Viewed December 26, 2010] +} } @Conference{McKenney04b @@ -879,10 +899,10 @@ Michal Ostrowski and Bryan Rosenburg and Jimi Xenidis" \url{http://www.linux.org.au/conf/2004/abstracts.html#90} \url{http://www.rdrop.com/users/paulmck/RCU/lockperf.2004.01.17a.pdf} [Viewed June 23, 2004]" -,annotation=" +,annotation={ Compares performance of RCU to that of other locking primitives over a number of CPUs (x86, Opteron, Itanium, and PPC). -" +} } @unpublished{Sarma04a @@ -891,7 +911,9 @@ Michal Ostrowski and Bryan Rosenburg and Jimi Xenidis" ,month="March" ,year="2004" ,note="\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=108003746402892&w=2}" -,annotation="Head of thread: dipankar/2004.03.23/rcu-low-lat.1.patch" +,annotation={ + Head of thread: dipankar/2004.03.23/rcu-low-lat.1.patch +} } @unpublished{Sarma04b @@ -900,7 +922,9 @@ Michal Ostrowski and Bryan Rosenburg and Jimi Xenidis" ,month="March" ,year="2004" ,note="\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=108016474829546&w=2}" -,annotation="dipankar/rcuth.2004.03.24/rcu-throttle.patch" +,annotation={ + dipankar/rcuth.2004.03.24/rcu-throttle.patch +} } @unpublished{Spraul04a @@ -911,9 +935,9 @@ Michal Ostrowski and Bryan Rosenburg and Jimi Xenidis" ,note="Available: \url{http://marc.theaimsgroup.com/?l=linux-kernel&m=108546407726602&w=2} [Viewed June 23, 2004]" -,annotation=" +,annotation={ Hierarchical-bitmap patch for RCU infrastructure. -" +} } @unpublished{Steiner04a @@ -950,10 +974,12 @@ Realtime Applications" ,year="2004" ,month="June" ,pages="182-191" -,annotation=" +,annotation={ Describes and compares a number of modifications to the Linux RCU implementation that make it friendly to realtime applications. -" + https://www.usenix.org/conference/2004-usenix-annual-technical-conference/making-rcu-safe-deep-sub-millisecond-response + [Viewed July 26, 2012] +} } @phdthesis{PaulEdwardMcKenneyPhD @@ -964,14 +990,13 @@ in Operating System Kernels" ,school="OGI School of Science and Engineering at Oregon Health and Sciences University" ,year="2004" -,note="Available: -\url{http://www.rdrop.com/users/paulmck/RCU/RCUdissertation.2004.07.14e1.pdf} -[Viewed October 15, 2004]" -,annotation=" +,annotation={ Describes RCU implementations and presents design patterns corresponding to common uses of RCU in several operating-system kernels. -" + http://www.rdrop.com/users/paulmck/RCU/RCUdissertation.2004.07.14e1.pdf + [Viewed October 15, 2004] +} } @unpublished{PaulEMcKenney2004rcu:dereference @@ -982,9 +1007,9 @@ Oregon Health and Sciences University" ,note="Available: \url{http://lkml.org/lkml/2004/8/6/237} [Viewed June 8, 2010]" -,annotation=" +,annotation={ Introduce rcu_dereference(). -" +} } @unpublished{JimHouston04a @@ -995,11 +1020,11 @@ Oregon Health and Sciences University" ,note="Available: \url{http://lkml.org/lkml/2004/8/30/87} [Viewed February 17, 2005]" -,annotation=" +,annotation={ Uses active code in rcu_read_lock() and rcu_read_unlock() to make RCU happen, allowing RCU to function on CPUs that do not receive a scheduling-clock interrupt. -" +} } @unpublished{TomHart04a @@ -1010,9 +1035,9 @@ Oregon Health and Sciences University" ,note="Available: \url{http://www.cs.toronto.edu/~tomhart/masters_thesis.html} [Viewed October 15, 2004]" -,annotation=" +,annotation={ Proposes comparing RCU to lock-free methods for the Linux kernel. -" +} } @unpublished{Vaddagiri04a @@ -1023,9 +1048,9 @@ Oregon Health and Sciences University" ,note="Available: \url{http://marc.theaimsgroup.com/?t=109395731700004&r=1&w=2} [Viewed October 18, 2004]" -,annotation=" +,annotation={ Srivatsa's RCU patch for tcp_ehash lookup. -" +} } @unpublished{Thirumalai04a @@ -1036,9 +1061,9 @@ Oregon Health and Sciences University" ,note="Available: \url{http://marc.theaimsgroup.com/?t=109144217400003&r=1&w=2} [Viewed October 18, 2004]" -,annotation=" +,annotation={ Ravikiran's lockfree FD patch. -" +} } @unpublished{Thirumalai04b @@ -1049,9 +1074,9 @@ Oregon Health and Sciences University" ,note="Available: \url{http://marc.theaimsgroup.com/?l=linux-kernel&m=109152521410459&w=2} [Viewed October 18, 2004]" -,annotation=" +,annotation={ Ravikiran's lockfree FD patch. -" +} } @unpublished{PaulEMcKenney2004rcu:assign:pointer @@ -1062,9 +1087,9 @@ Oregon Health and Sciences University" ,note="Available: \url{http://lkml.org/lkml/2004/10/23/241} [Viewed June 8, 2010]" -,annotation=" +,annotation={ Introduce rcu_assign_pointer(). -" +} } @unpublished{JamesMorris04a @@ -1073,12 +1098,12 @@ Oregon Health and Sciences University" ,day="15" ,month="November" ,year="2004" -,note="Available: -\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=110054979416004&w=2} -[Viewed December 10, 2004]" -,annotation=" +,note="\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=110054979416004&w=2}" +,annotation={ James Morris posts Kaigai Kohei's patch to LKML. -" + [Viewed December 10, 2004] + Kaigai's patch is at https://lkml.org/lkml/2004/9/27/52 +} } @unpublished{JamesMorris04b @@ -1089,9 +1114,9 @@ Oregon Health and Sciences University" ,note="Available: \url{http://www.livejournal.com/users/james_morris/2153.html} [Viewed December 10, 2004]" -,annotation=" +,annotation={ RCU helps SELinux performance. ;-) Made LWN. -" +} } @unpublished{PaulMcKenney2005RCUSemantics @@ -1103,9 +1128,9 @@ Oregon Health and Sciences University" ,note="Available: \url{http://www.rdrop.com/users/paulmck/RCU/rcu-semantics.2005.01.30a.pdf} [Viewed December 6, 2009]" -,annotation=" +,annotation={ Early derivation of RCU semantics. -" +} } @unpublished{PaulMcKenney2005e @@ -1117,10 +1142,10 @@ Oregon Health and Sciences University" ,note="Available: \url{http://lkml.org/lkml/2005/3/17/199} [Viewed September 5, 2005]" -,annotation=" +,annotation={ First posting showing how RCU can be safely adapted for preemptable RCU read side critical sections. -" +} } @unpublished{EsbenNeilsen2005a @@ -1132,12 +1157,12 @@ Oregon Health and Sciences University" ,note="Available: \url{http://lkml.org/lkml/2005/3/18/122} [Viewed March 30, 2006]" -,annotation=" +,annotation={ Esben Neilsen suggests read-side suppression of grace-period processing for crude-but-workable realtime RCU. The downside - is indefinite grace periods...But this is OK for experimentation + is indefinite grace periods... But this is OK for experimentation and testing. -" +} } @unpublished{TomHart05a @@ -1149,10 +1174,10 @@ Data Structures" ,note="Available: \url{ftp://ftp.cs.toronto.edu/csrg-technical-reports/515/} [Viewed March 4, 2005]" -,annotation=" +,annotation={ Comparison of RCU, QBSR, and EBSR. RCU wins for read-mostly workloads. ;-) -" +} } @unpublished{JonCorbet2005DeprecateSyncKernel @@ -1164,10 +1189,10 @@ Data Structures" ,note="Available: \url{http://lwn.net/Articles/134484/} [Viewed May 3, 2005]" -,annotation=" +,annotation={ Jon Corbet describes deprecation of synchronize_kernel() in favor of synchronize_rcu() and synchronize_sched(). -" +} } @unpublished{PaulMcKenney05a @@ -1178,10 +1203,10 @@ Data Structures" ,note="Available: \url{http://lkml.org/lkml/2005/5/9/185} [Viewed May 13, 2005]" -,annotation=" +,annotation={ First publication of working lock-based deferred free patches for the CONFIG_PREEMPT_RT environment. -" +} } @conference{PaulMcKenney05b @@ -1194,10 +1219,10 @@ Data Structures" ,note="Available: \url{http://www.rdrop.com/users/paulmck/RCU/realtimeRCU.2005.04.23a.pdf} [Viewed May 13, 2005]" -,annotation=" +,annotation={ Realtime turns into making RCU yet more realtime friendly. http://lca2005.linux.org.au/Papers/Paul%20McKenney/Towards%20Hard%20Realtime%20Response%20from%20the%20Linux%20Kernel/LKS.2005.04.22a.pdf -" +} } @unpublished{PaulEMcKenneyHomePage @@ -1208,9 +1233,9 @@ Data Structures" ,note="Available: \url{http://www.rdrop.com/users/paulmck/} [Viewed May 25, 2005]" -,annotation=" +,annotation={ Paul McKenney's home page. -" +} } @unpublished{PaulEMcKenneyRCUPage @@ -1221,9 +1246,9 @@ Data Structures" ,note="Available: \url{http://www.rdrop.com/users/paulmck/RCU} [Viewed May 25, 2005]" -,annotation=" +,annotation={ Paul McKenney's RCU page. -" +} } @unpublished{JosephSeigh2005a @@ -1232,10 +1257,10 @@ Data Structures" ,month="July" ,year="2005" ,note="Personal communication" -,annotation=" +,annotation={ Joe Seigh announcing his atomic-ptr-plus project. http://sourceforge.net/projects/atomic-ptr-plus/ -" +} } @unpublished{JosephSeigh2005b @@ -1247,9 +1272,9 @@ Data Structures" ,note="Available: \url{http://sourceforge.net/projects/atomic-ptr-plus/} [Viewed August 8, 2005]" -,annotation=" +,annotation={ Joe Seigh's atomic-ptr-plus project. -" +} } @unpublished{PaulMcKenney2005c @@ -1261,9 +1286,9 @@ Data Structures" ,note="Available: \url{http://lkml.org/lkml/2005/8/1/155} [Viewed March 14, 2006]" -,annotation=" +,annotation={ First operating counter-based realtime RCU patch posted to LKML. -" +} } @unpublished{PaulMcKenney2005d @@ -1275,11 +1300,11 @@ Data Structures" ,note="Available: \url{http://lkml.org/lkml/2005/8/8/108} [Viewed March 14, 2006]" -,annotation=" +,annotation={ First operating counter-based realtime RCU patch posted to LKML, but fixed so that various unusual combinations of configuration parameters all function properly. -" +} } @unpublished{PaulMcKenney2005rcutorture @@ -1291,9 +1316,25 @@ Data Structures" ,note="Available: \url{http://lkml.org/lkml/2005/10/1/70} [Viewed March 14, 2006]" -,annotation=" +,annotation={ First rcutorture patch. -" +} +} + +@unpublished{DavidSMiller2006HashedLocking +,Author="David S. Miller" +,Title="Re: [{PATCH}, {RFC}] {RCU} : {OOM} avoidance and lower latency" +,month="January" +,day="6" +,year="2006" +,note="Available: +\url{https://lkml.org/lkml/2006/1/7/22} +[Viewed February 29, 2012]" +,annotation={ + David Miller's view on hashed arrays of locks: used to really + like it, but time he saw an opportunity for this technique, + something else always proved superior. Partitioning or RCU. ;-) +} } @conference{ThomasEHart2006a @@ -1309,10 +1350,10 @@ Distributed Processing Symposium" ,note="Available: \url{http://www.rdrop.com/users/paulmck/RCU/hart_ipdps06.pdf} [Viewed April 28, 2008]" -,annotation=" +,annotation={ Compares QSBR, HPBR, EBR, and lock-free reference counting. http://www.cs.toronto.edu/~tomhart/perflab/ipdps06.tgz -" +} } @unpublished{NickPiggin2006radixtree @@ -1324,9 +1365,9 @@ Distributed Processing Symposium" ,note="Available: \url{http://lkml.org/lkml/2006/6/20/238} [Viewed March 25, 2008]" -,annotation=" +,annotation={ RCU-protected radix tree. -" +} } @Conference{PaulEMcKenney2006b @@ -1341,9 +1382,9 @@ Suparna Bhattacharya" \url{http://www.linuxsymposium.org/2006/view_abstract.php?content_key=184} \url{http://www.rdrop.com/users/paulmck/RCU/OLSrtRCU.2006.08.11a.pdf} [Viewed January 1, 2007]" -,annotation=" +,annotation={ Described how to improve the -rt implementation of realtime RCU. -" +} } @unpublished{WikipediaRCU @@ -1354,12 +1395,11 @@ Canis Rufus and Zoicon5 and Anome and Hal Eisen" ,month="July" ,day="8" ,year="2006" -,note="Available: -\url{http://en.wikipedia.org/wiki/Read-copy-update} -[Viewed August 21, 2006]" -,annotation=" +,note="\url{http://en.wikipedia.org/wiki/Read-copy-update}" +,annotation={ Wikipedia RCU page as of July 8 2006. -" + [Viewed August 21, 2006] +} } @Conference{NickPiggin2006LocklessPageCache @@ -1372,9 +1412,9 @@ Canis Rufus and Zoicon5 and Anome and Hal Eisen" ,note="Available: \url{http://www.linuxsymposium.org/2006/view_abstract.php?content_key=184} [Viewed January 11, 2009]" -,annotation=" +,annotation={ Uses RCU-protected radix tree for a lockless page cache. -" +} } @unpublished{PaulEMcKenney2006c @@ -1388,9 +1428,9 @@ Canis Rufus and Zoicon5 and Anome and Hal Eisen" Revised: \url{http://www.rdrop.com/users/paulmck/RCU/srcu.2007.01.14a.pdf} [Viewed August 21, 2006]" -,annotation=" +,annotation={ LWN article introducing SRCU. -" +} } @unpublished{RobertOlsson2006a @@ -1399,12 +1439,11 @@ Revised: ,month="August" ,day="18" ,year="2006" -,note="Available: -\url{http://www.nada.kth.se/~snilsson/publications/TRASH/trash.pdf} -[Viewed March 4, 2011]" -,annotation=" +,note="\url{http://www.nada.kth.se/~snilsson/publications/TRASH/trash.pdf}" +,annotation={ RCU-protected dynamic trie-hash combination. -" + [Viewed March 4, 2011] +} } @unpublished{ChristophHellwig2006RCU2SRCU @@ -1426,10 +1465,10 @@ Revised: ,note="Available: \url{http://www.rdrop.com/users/paulmck/RCU/linuxusage.html} [Viewed January 14, 2007]" -,annotation=" +,annotation={ Paul McKenney's RCU page showing graphs plotting Linux-kernel usage of RCU. -" +} } @unpublished{PaulEMcKenneyRCUusageRawDataPage @@ -1440,10 +1479,10 @@ Revised: ,note="Available: \url{http://www.rdrop.com/users/paulmck/RCU/linuxusage/rculocktab.html} [Viewed January 14, 2007]" -,annotation=" +,annotation={ Paul McKenney's RCU page showing Linux usage of RCU in tabular form, with links to corresponding cscope databases. -" +} } @unpublished{GauthamShenoy2006RCUrwlock @@ -1455,13 +1494,13 @@ Revised: ,note="Available: \url{http://lkml.org/lkml/2006/10/26/73} [Viewed January 26, 2009]" -,annotation=" +,annotation={ RCU-based reader-writer lock that allows readers to proceed with no memory barriers or atomic instruction in absence of writers. If writer do show up, readers must of course wait as required by the semantics of reader-writer locking. This is a recursive lock. -" +} } @unpublished{JensAxboe2006SlowSRCU @@ -1474,11 +1513,11 @@ Revised: ,note="Available: \url{http://lkml.org/lkml/2006/11/17/56} [Viewed May 28, 2007]" -,annotation=" +,annotation={ SRCU's grace periods are too slow for Jens, even after a factor-of-three speedup. Sped-up version of SRCU at http://lkml.org/lkml/2006/11/17/359. -" +} } @unpublished{OlegNesterov2006QRCU @@ -1491,10 +1530,10 @@ Revised: ,note="Available: \url{http://lkml.org/lkml/2006/11/19/69} [Viewed May 28, 2007]" -,annotation=" +,annotation={ First cut of QRCU. Expanded/corrected versions followed. Used to be OlegNesterov2007QRCU, now time-corrected. -" +} } @unpublished{OlegNesterov2006aQRCU @@ -1506,10 +1545,10 @@ Revised: ,note="Available: \url{http://lkml.org/lkml/2006/11/29/330} [Viewed November 26, 2008]" -,annotation=" +,annotation={ Expanded/corrected version of QRCU. Used to be OlegNesterov2007aQRCU, now time-corrected. -" +} } @unpublished{EvgeniyPolyakov2006RCUslowdown @@ -1521,10 +1560,10 @@ Revised: ,note="Available: \url{http://www.ioremap.net/node/41} [Viewed October 28, 2008]" -,annotation=" +,annotation={ Using RCU as a pure delay leads to a 2.5x slowdown in skbs in the Linux kernel. -" +} } @inproceedings{ChrisMatthews2006ClusteredObjectsRCU @@ -1541,7 +1580,8 @@ Revised: ,annotation={ Uses K42's RCU-like functionality to manage clustered-object lifetimes. -}} +} +} @article{DilmaDaSilva2006K42 ,author = {Silva, Dilma Da and Krieger, Orran and Wisniewski, Robert W. and Waterland, Amos and Tam, David and Baumann, Andrew} @@ -1557,7 +1597,8 @@ Revised: ,address = {New York, NY, USA} ,annotation={ Describes relationship of K42 generations to RCU. -}} +} +} # CoreyMinyard2007list_splice_rcu @unpublished{CoreyMinyard2007list:splice:rcu @@ -1569,9 +1610,9 @@ Revised: ,note="Available: \url{http://lkml.org/lkml/2007/1/3/112} [Viewed May 28, 2007]" -,annotation=" +,annotation={ Patch for list_splice_rcu(). -" +} } @unpublished{PaulEMcKenney2007rcubarrier @@ -1583,9 +1624,9 @@ Revised: ,note="Available: \url{http://lwn.net/Articles/217484/} [Viewed November 22, 2007]" -,annotation=" +,annotation={ LWN article introducing the rcu_barrier() primitive. -" +} } @unpublished{PeterZijlstra2007SyncBarrier @@ -1597,10 +1638,10 @@ Revised: ,note="Available: \url{http://lkml.org/lkml/2007/1/28/34} [Viewed March 27, 2008]" -,annotation=" +,annotation={ RCU-like implementation for frequent updaters and rare readers(!). Subsumed into QRCU. Maybe... -" +} } @unpublished{PaulEMcKenney2007BoostRCU @@ -1609,14 +1650,13 @@ Revised: ,month="February" ,day="5" ,year="2007" -,note="Available: -\url{http://lwn.net/Articles/220677/} -Revised: -\url{http://www.rdrop.com/users/paulmck/RCU/RCUbooststate.2007.04.16a.pdf} -[Viewed September 7, 2007]" -,annotation=" +,note="\url{http://lwn.net/Articles/220677/}" +,annotation={ LWN article introducing RCU priority boosting. -" + Revised: + http://www.rdrop.com/users/paulmck/RCU/RCUbooststate.2007.04.16a.pdf + [Viewed September 7, 2007] +} } @unpublished{PaulMcKenney2007QRCUpatch @@ -1628,9 +1668,9 @@ Revised: ,note="Available: \url{http://lkml.org/lkml/2007/2/25/18} [Viewed March 27, 2008]" -,annotation=" +,annotation={ Patch for QRCU supplying lock-free fast path. -" +} } @article{JonathanAppavoo2007K42RCU @@ -1647,7 +1687,8 @@ Revised: ,address = {New York, NY, USA} ,annotation={ Role of RCU in K42. -}} +} +} @conference{RobertOlsson2007Trash ,Author="Robert Olsson and Stefan Nilsson" @@ -1658,9 +1699,9 @@ Revised: ,note="Available: \url{http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=4281239} [Viewed October 1, 2010]" -,annotation=" +,annotation={ RCU-protected dynamic trie-hash combination. -" +} } @conference{PeterZijlstra2007ConcurrentPagecacheRCU @@ -1673,10 +1714,10 @@ Revised: ,note="Available: \url{http://ols.108.redhat.com/2007/Reprints/zijlstra-Reprint.pdf} [Viewed April 14, 2008]" -,annotation=" +,annotation={ Page-cache modifications permitting RCU readers and concurrent updates. -" +} } @unpublished{PaulEMcKenney2007whatisRCU @@ -1701,11 +1742,11 @@ Revised: ,note="Available: \url{http://lwn.net/Articles/243851/} [Viewed September 8, 2007]" -,annotation=" +,annotation={ LWN article describing Promela and spin, and also using Oleg Nesterov's QRCU as an example (with Paul McKenney's fastpath). Merged patch at: http://lkml.org/lkml/2007/2/25/18 -" +} } @unpublished{PaulEMcKenney2007WG21DDOatomics @@ -1714,12 +1755,12 @@ Revised: ,month="August" ,day="3" ,year="2007" -,note="Preprint: +,note="Available: \url{http://open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2664.htm} [Viewed December 7, 2009]" -,annotation=" +,annotation={ RCU for C++, parts 1 and 2. -" +} } @unpublished{PaulEMcKenney2007WG21DDOannotation @@ -1728,12 +1769,12 @@ Revised: ,month="September" ,day="18" ,year="2008" -,note="Preprint: +,note="Available: \url{http://open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2782.htm} [Viewed December 7, 2009]" -,annotation=" +,annotation={ RCU for C++, part 2, updated many times. -" +} } @unpublished{PaulEMcKenney2007PreemptibleRCUPatch @@ -1745,10 +1786,10 @@ Revised: ,note="Available: \url{http://lkml.org/lkml/2007/9/10/213} [Viewed October 25, 2007]" -,annotation=" +,annotation={ Final patch for preemptable RCU to -rt. (Later patches were to mainline, eventually incorporated.) -" +} } @unpublished{PaulEMcKenney2007PreemptibleRCU @@ -1760,9 +1801,9 @@ Revised: ,note="Available: \url{http://lwn.net/Articles/253651/} [Viewed October 25, 2007]" -,annotation=" +,annotation={ LWN article describing the design of preemptible RCU. -" +} } @article{ThomasEHart2007a @@ -1783,6 +1824,7 @@ Revised: } } +# MathieuDesnoyers2007call_rcu_schedNeeded @unpublished{MathieuDesnoyers2007call:rcu:schedNeeded ,Author="Mathieu Desnoyers" ,Title="Re: [patch 1/2] {Linux} Kernel Markers - Support Multiple Probes" @@ -1792,9 +1834,9 @@ Revised: ,note="Available: \url{http://lkml.org/lkml/2007/12/20/244} [Viewed March 27, 2008]" -,annotation=" +,annotation={ Request for call_rcu_sched() and rcu_barrier_sched(). -" +} } @@ -1815,11 +1857,11 @@ Revised: ,note="Available: \url{http://lwn.net/Articles/262464/} [Viewed December 27, 2007]" -,annotation=" +,annotation={ Lays out the three basic components of RCU: (1) publish-subscribe, (2) wait for pre-existing readers to complete, and (2) maintain multiple versions. -" +} } @unpublished{PaulEMcKenney2008WhatIsRCUUsage @@ -1831,7 +1873,7 @@ Revised: ,note="Available: \url{http://lwn.net/Articles/263130/} [Viewed January 4, 2008]" -,annotation=" +,annotation={ Lays out six uses of RCU: 1. RCU is a Reader-Writer Lock Replacement 2. RCU is a Restricted Reference-Counting Mechanism @@ -1839,7 +1881,7 @@ Revised: 4. RCU is a Poor Man's Garbage Collector 5. RCU is a Way of Providing Existence Guarantees 6. RCU is a Way of Waiting for Things to Finish -" +} } @unpublished{PaulEMcKenney2008WhatIsRCUAPI @@ -1851,10 +1893,10 @@ Revised: ,note="Available: \url{http://lwn.net/Articles/264090/} [Viewed January 10, 2008]" -,annotation=" +,annotation={ Gives an overview of the Linux-kernel RCU API and a brief annotated RCU bibliography. -" +} } # @@ -1872,10 +1914,10 @@ Revised: ,note="Available: \url{http://lkml.org/lkml/2008/1/29/208} [Viewed March 27, 2008]" -,annotation=" +,annotation={ Patch that prevents preemptible RCU from unnecessarily waking up dynticks-idle CPUs. -" +} } @unpublished{PaulEMcKenney2008LKMLDependencyOrdering @@ -1887,9 +1929,9 @@ Revised: ,note="Available: \url{http://lkml.org/lkml/2008/2/2/255} [Viewed October 18, 2008]" -,annotation=" +,annotation={ Explanation of compilers violating dependency ordering. -" +} } @Conference{PaulEMcKenney2008Beijing @@ -1916,24 +1958,26 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://lwn.net/Articles/279077/} [Viewed April 24, 2008]" -,annotation=" +,annotation={ Describes use of Promela and Spin to validate (and fix!) the dynticks/RCU interface. -" +} } @article{DinakarGuniguntala2008IBMSysJ ,author="D. Guniguntala and P. E. McKenney and J. Triplett and J. Walpole" ,title="The read-copy-update mechanism for supporting real-time applications on shared-memory multiprocessor systems with {Linux}" ,Year="2008" -,Month="April-June" +,Month="May" ,journal="IBM Systems Journal" ,volume="47" ,number="2" ,pages="221-236" -,annotation=" +,annotation={ RCU, realtime RCU, sleepable RCU, performance. -" + http://www.research.ibm.com/journal/sj/472/guniguntala.pdf + [Viewed April 24, 2008] +} } @unpublished{LaiJiangshan2008NewClassicAlgorithm @@ -1945,11 +1989,11 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://lkml.org/lkml/2008/6/2/539} [Viewed December 10, 2008]" -,annotation=" +,annotation={ Updated RCU classic algorithm. Introduced multi-tailed list for RCU callbacks and also pulling common code into __call_rcu(). -" +} } @article{PaulEMcKenney2008RCUOSR @@ -1966,6 +2010,7 @@ lot of {Linux} into your technology!!!" ,address="New York, NY, USA" ,annotation={ Linux changed RCU to a far greater degree than RCU has changed Linux. + http://portal.acm.org/citation.cfm?doid=1400097.1400099 } } @@ -1978,10 +2023,10 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://lkml.org/lkml/2008/8/21/336} [Viewed December 8, 2008]" -,annotation=" +,annotation={ State-based RCU. One key thing that this patch does is to separate the dynticks handling of NMIs and IRQs. -" +} } @unpublished{ManfredSpraul2008dyntickIRQNMI @@ -1993,12 +2038,13 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://lkml.org/lkml/2008/9/6/86} [Viewed December 8, 2008]" -,annotation=" +,annotation={ Manfred notes a fix required to my attempt to separate irq and NMI processing for hierarchical RCU's dynticks interface. -" +} } +# Was PaulEMcKenney2011cyclicRCU @techreport{PaulEMcKenney2008cyclicRCU ,author="Paul E. McKenney" ,title="Efficient Support of Consistent Cyclic Search With Read-Copy Update" @@ -2008,11 +2054,11 @@ lot of {Linux} into your technology!!!" ,number="US Patent 7,426,511" ,month="September" ,pages="23" -,annotation=" +,annotation={ Maintains an additional level of indirection to allow readers to confine themselves to the desired snapshot of the data structure. Only permits one update at a time. -" +} } @unpublished{PaulEMcKenney2008HierarchicalRCU @@ -2021,13 +2067,12 @@ lot of {Linux} into your technology!!!" ,month="November" ,day="3" ,year="2008" -,note="Available: -\url{http://lwn.net/Articles/305782/} -[Viewed November 6, 2008]" -,annotation=" +,note="\url{http://lwn.net/Articles/305782/}" +,annotation={ RCU with combining-tree-based grace-period detection, permitting it to handle thousands of CPUs. -" + [Viewed November 6, 2008] +} } @unpublished{PaulEMcKenney2009BloatwatchRCU @@ -2039,10 +2084,10 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://lkml.org/lkml/2009/1/14/449} [Viewed January 15, 2009]" -,annotation=" +,annotation={ Small-footprint implementation of RCU for uniprocessor embedded applications -- and also for exposition purposes. -" +} } @conference{PaulEMcKenney2009MaliciousURCU @@ -2055,9 +2100,9 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://www.rdrop.com/users/paulmck/RCU/urcutorture.2009.01.22a.pdf} [Viewed February 2, 2009]" -,annotation=" +,annotation={ Realtime RCU and torture-testing RCU uses. -" +} } @unpublished{MathieuDesnoyers2009URCU @@ -2066,16 +2111,14 @@ lot of {Linux} into your technology!!!" ,month="February" ,day="5" ,year="2009" -,note="Available: -\url{http://lkml.org/lkml/2009/2/5/572} -\url{http://lttng.org/urcu} -[Viewed February 20, 2009]" -,annotation=" +,note="\url{http://lttng.org/urcu}" +,annotation={ Mathieu Desnoyers's user-space RCU implementation. git://lttng.org/userspace-rcu.git http://lttng.org/cgi-bin/gitweb.cgi?p=userspace-rcu.git http://lttng.org/urcu -" + http://lkml.org/lkml/2009/2/5/572 +} } @unpublished{PaulEMcKenney2009LWNBloatWatchRCU @@ -2087,9 +2130,24 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://lwn.net/Articles/323929/} [Viewed March 20, 2009]" -,annotation=" +,annotation={ Uniprocessor assumptions allow simplified RCU implementation. -" +} +} + +@unpublished{EvgeniyPolyakov2009EllipticsNetwork +,Author="Evgeniy Polyakov" +,Title="The Elliptics Network" +,month="April" +,day="17" +,year="2009" +,note="Available: +\url{http://www.ioremap.net/projects/elliptics} +[Viewed April 30, 2009]" +,annotation={ + Distributed hash table with transactions, using elliptic + hash functions to distribute data. +} } @unpublished{PaulEMcKenney2009expeditedRCU @@ -2101,9 +2159,9 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://lkml.org/lkml/2009/6/25/306} [Viewed August 16, 2009]" -,annotation=" +,annotation={ First posting of expedited RCU to be accepted into -tip. -" +} } @unpublished{PaulEMcKenney2009fastRTRCU @@ -2115,21 +2173,21 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://lkml.org/lkml/2009/7/23/294} [Viewed August 15, 2009]" -,annotation=" +,annotation={ First posting of simple and fast preemptable RCU. -" +} } -@InProceedings{JoshTriplett2009RPHash +@unpublished{JoshTriplett2009RPHash ,Author="Josh Triplett" ,Title="Scalable concurrent hash tables via relativistic programming" ,month="September" ,year="2009" -,booktitle="Linux Plumbers Conference 2009" -,annotation=" +,note="Linux Plumbers Conference presentation" +,annotation={ RP fun with hash tables. - See also JoshTriplett2010RPHash -" + Superseded by JoshTriplett2010RPHash +} } @phdthesis{MathieuDesnoyersPhD @@ -2154,9 +2212,9 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://wiki.cs.pdx.edu/rp/} [Viewed December 9, 2009]" -,annotation=" +,annotation={ Main Relativistic Programming Wiki. -" +} } @conference{PaulEMcKenney2009DeterministicRCU @@ -2180,9 +2238,9 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://paulmck.livejournal.com/14639.html} [Viewed June 4, 2010]" -,annotation=" +,annotation={ Day-one bug in Tree RCU that took forever to track down. -" +} } @unpublished{MathieuDesnoyers2009defer:rcu @@ -2193,10 +2251,10 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://lkml.org/lkml/2009/10/18/129} [Viewed December 29, 2009]" -,annotation=" +,annotation={ Mathieu proposed defer_rcu() with fixed-size per-thread pool of RCU callbacks. -" +} } @unpublished{MathieuDesnoyers2009VerifPrePub @@ -2205,10 +2263,10 @@ lot of {Linux} into your technology!!!" ,month="December" ,year="2009" ,note="Submitted to IEEE TPDS" -,annotation=" +,annotation={ OOMem model for Mathieu's user-level RCU mechanical proof of correctness. -" +} } @unpublished{MathieuDesnoyers2009URCUPrePub @@ -2216,15 +2274,15 @@ lot of {Linux} into your technology!!!" ,Title="User-Level Implementations of Read-Copy Update" ,month="December" ,year="2010" -,url=\url{http://www.computer.org/csdl/trans/td/2012/02/ttd2012020375-abs.html} -,annotation=" +,url={\url{http://www.computer.org/csdl/trans/td/2012/02/ttd2012020375-abs.html}} +,annotation={ RCU overview, desiderata, semi-formal semantics, user-level RCU usage scenarios, three classes of RCU implementation, wait-free RCU updates, RCU grace-period batching, update overhead, http://www.rdrop.com/users/paulmck/RCU/urcu-main-accepted.2011.08.30a.pdf http://www.rdrop.com/users/paulmck/RCU/urcu-supp-accepted.2011.08.30a.pdf Superseded by MathieuDesnoyers2012URCU. -" +} } @inproceedings{HariKannan2009DynamicAnalysisRCU @@ -2240,7 +2298,8 @@ lot of {Linux} into your technology!!!" ,address = {New York, NY, USA} ,annotation={ Uses RCU to protect metadata used in dynamic analysis. -}} +} +} @conference{PaulEMcKenney2010SimpleOptRCU ,Author="Paul E. McKenney" @@ -2252,10 +2311,10 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://www.rdrop.com/users/paulmck/RCU/SimplicityThruOptimization.2010.01.21f.pdf} [Viewed October 10, 2010]" -,annotation=" +,annotation={ TREE_PREEMPT_RCU optimizations greatly simplified the old PREEMPT_RCU implementation. -" +} } @unpublished{PaulEMcKenney2010LockdepRCU @@ -2264,12 +2323,11 @@ lot of {Linux} into your technology!!!" ,month="February" ,year="2010" ,day="1" -,note="Available: -\url{https://lwn.net/Articles/371986/} -[Viewed June 4, 2010]" -,annotation=" +,note="\url{https://lwn.net/Articles/371986/}" +,annotation={ CONFIG_PROVE_RCU, or at least an early version. -" + [Viewed June 4, 2010] +} } @unpublished{AviKivity2010KVM2RCU @@ -2280,10 +2338,10 @@ lot of {Linux} into your technology!!!" ,note="Available: \url{http://www.mail-archive.com/kvm@vger.kernel.org/msg28640.html} [Viewed March 20, 2010]" -,annotation=" +,annotation={ Use of RCU permits KVM to increase the size of guest OSes from 16 CPUs to 64 CPUs. -" +} } @unpublished{HerbertXu2010RCUResizeHash @@ -2297,7 +2355,19 @@ lot of {Linux} into your technology!!!" ,annotation={ Use a pair of list_head structures to support RCU-protected resizable hash tables. -}} +} +} + +@mastersthesis{AbhinavDuggal2010Masters +,author="Abhinav Duggal" +,title="Stopping Data Races Using Redflag" +,school="Stony Brook University" +,year="2010" +,annotation={ + Data-race detector incorporating RCU. + http://www.filesystems.org/docs/abhinav-thesis/abhinav_thesis.pdf +} +} @article{JoshTriplett2010RPHash ,author="Josh Triplett and Paul E. McKenney and Jonathan Walpole" @@ -2310,7 +2380,8 @@ lot of {Linux} into your technology!!!" ,annotation={ RP fun with hash tables. http://portal.acm.org/citation.cfm?id=1842733.1842750 -}} +} +} @unpublished{PaulEMcKenney2010RCUAPI ,Author="Paul E. McKenney" @@ -2318,12 +2389,11 @@ lot of {Linux} into your technology!!!" ,month="December" ,day="8" ,year="2010" -,note="Available: -\url{http://lwn.net/Articles/418853/} -[Viewed December 8, 2010]" -,annotation=" +,note="\url{http://lwn.net/Articles/418853/}" +,annotation={ Includes updated software-engineering features. -" + [Viewed December 8, 2010] +} } @mastersthesis{AndrejPodzimek2010masters @@ -2338,7 +2408,8 @@ lot of {Linux} into your technology!!!" Reviews RCU implementations and creates a few for OpenSolaris. Drives quiescent-state detection from RCU read-side primitives, in a manner roughly similar to that of Jim Houston. -}} +} +} @unpublished{LinusTorvalds2011Linux2:6:38:rc1:NPigginVFS ,Author="Linus Torvalds" @@ -2358,7 +2429,8 @@ lot of {Linux} into your technology!!!" of the most expensive parts of path component lookup, which was the d_lock on every component lookup. So I'm seeing improvements of 30-50% on some seriously pathname-lookup intensive loads." -}} +} +} @techreport{JoshTriplett2011RPScalableCorrectOrdering ,author = {Josh Triplett and Philip W. Howard and Paul E. McKenney and Jonathan Walpole} @@ -2392,12 +2464,12 @@ lot of {Linux} into your technology!!!" ,number="US Patent 7,953,778" ,month="May" ,pages="34" -,annotation=" +,annotation={ Maintains an array of generation numbers to track in-flight updates and keeps an additional level of indirection to allow readers to confine themselves to the desired snapshot of the data structure. -" +} } @inproceedings{Triplett:2011:RPHash @@ -2408,7 +2480,7 @@ lot of {Linux} into your technology!!!" ,year = {2011} ,pages = {145--158} ,numpages = {14} -,url={http://www.usenix.org/event/atc11/tech/final_files/atc11_proceedings.pdf} +,url={http://www.usenix.org/event/atc11/tech/final_files/Triplett.pdf} ,publisher = {The USENIX Association} ,address = {Portland, OR USA} } @@ -2419,27 +2491,58 @@ lot of {Linux} into your technology!!!" ,month="July" ,day="27" ,year="2011" -,note="Available: -\url{http://lwn.net/Articles/453002/} -[Viewed July 27, 2011]" -,annotation=" +,note="\url{http://lwn.net/Articles/453002/}" +,annotation={ Analysis of the RCU trainwreck in Linux kernel 3.0. -" + [Viewed July 27, 2011] +} } @unpublished{NeilBrown2011MeetTheLockers ,Author="Neil Brown" -,Title="Meet the Lockers" +,Title="Meet the {Lockers}" ,month="August" ,day="3" ,year="2011" ,note="Available: \url{http://lwn.net/Articles/453685/} [Viewed September 2, 2011]" -,annotation=" +,annotation={ The Locker family as an analogy for locking, reference counting, RCU, and seqlock. -" +} +} + +@inproceedings{Seyster:2011:RFA:2075416.2075425 +,author = {Seyster, Justin and Radhakrishnan, Prabakar and Katoch, Samriti and Duggal, Abhinav and Stoller, Scott D. and Zadok, Erez} +,title = {Redflag: a framework for analysis of Kernel-level concurrency} +,booktitle = {Proceedings of the 11th international conference on Algorithms and architectures for parallel processing - Volume Part I} +,series = {ICA3PP'11} +,year = {2011} +,isbn = {978-3-642-24649-4} +,location = {Melbourne, Australia} +,pages = {66--79} +,numpages = {14} +,url = {http://dl.acm.org/citation.cfm?id=2075416.2075425} +,acmid = {2075425} +,publisher = {Springer-Verlag} +,address = {Berlin, Heidelberg} +} + +@phdthesis{JoshTriplettPhD +,author="Josh Triplett" +,title="Relativistic Causal Ordering: A Memory Model for Scalable Concurrent Data Structures" +,school="Portland State University" +,year="2012" +,annotation={ + RCU-protected hash tables, barriers vs. read-side traversal order. + . + If the updater is making changes in the opposite direction from + the read-side traveral order, the updater need only execute a + memory-barrier instruction, but if in the same direction, the + updater needs to wait for a grace period between the individual + updates. +} } @article{MathieuDesnoyers2012URCU @@ -2459,5 +2562,150 @@ lot of {Linux} into your technology!!!" RCU updates, RCU grace-period batching, update overhead, http://www.rdrop.com/users/paulmck/RCU/urcu-main-accepted.2011.08.30a.pdf http://www.rdrop.com/users/paulmck/RCU/urcu-supp-accepted.2011.08.30a.pdf + http://www.computer.org/cms/Computer.org/dl/trans/td/2012/02/extras/ttd2012020375s.pdf +} +} + +@inproceedings{AustinClements2012RCULinux:mmapsem +,author = {Austin Clements and Frans Kaashoek and Nickolai Zeldovich} +,title = {Scalable Address Spaces Using {RCU} Balanced Trees} +,booktitle = {Architectural Support for Programming Languages and Operating Systems (ASPLOS 2012)} +,month = {March} +,year = {2012} +,pages = {199--210} +,numpages = {12} +,publisher = {ACM} +,address = {London, UK} +,url="http://people.csail.mit.edu/nickolai/papers/clements-bonsai.pdf" +} + +@unpublished{PaulEMcKenney2012ELCbattery +,Author="Paul E. McKenney" +,Title="Making {RCU} Safe For Battery-Powered Devices" +,month="February" +,day="15" +,year="2012" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU/RCUdynticks.2012.02.15b.pdf} +[Viewed March 1, 2012]" +,annotation={ + RCU_FAST_NO_HZ, round 2. +} +} + +@article{GuillermoVigueras2012RCUCrowd +,author = {Vigueras, Guillermo and Ordu\~{n}a, Juan M. and Lozano, Miguel} +,day = {25} +,doi = {10.1007/s11227-012-0766-x} +,issn = {0920-8542} +,journal = {The Journal of Supercomputing} +,keywords = {linux, simulation} +,month = apr +,posted-at = {2012-05-03 09:12:04} +,priority = {2} +,title = {{A Read-Copy Update based parallel server for distributed crowd simulations}} +,url = {http://dx.doi.org/10.1007/s11227-012-0766-x} +,year = {2012} +} + + +@unpublished{JonCorbet2012ACCESS:ONCE +,Author="Jon Corbet" +,Title="{ACCESS\_ONCE()}" +,month="August" +,day="1" +,year="2012" +,note="\url{http://lwn.net/Articles/508991/}" +,annotation={ + A couple of simple specific compiler optimizations that motivate + ACCESS_ONCE(). +} +} + +@unpublished{AlexeyGotsman2012VerifyGraceExtended +,Author="Alexey Gotsman and Noam Rinetzky and Hongseok Yang" +,Title="Verifying Highly Concurrent Algorithms with Grace (extended version)" +,month="July" +,day="10" +,year="2012" +,note="\url{http://software.imdea.org/~gotsman/papers/recycling-esop13-ext.pdf}" +,annotation={ + Separation-logic formulation of RCU uses. +} +} + +@unpublished{PaulMcKenney2012RCUUsage +,Author="Paul E. McKenney and Silas Boyd-Wickizer and Jonathan Walpole" +,Title="{RCU} Usage In the Linux Kernel: One Decade Later" +,month="September" +,day="17" +,year="2012" +,url=http://rdrop.com/users/paulmck/techreports/survey.2012.09.17a.pdf +,note="Technical report paulmck.2012.09.17" +,annotation={ + Overview of the first variant of no-CBs CPUs for RCU. +} +} + +@unpublished{JonCorbet2012NOCB +,Author="Jon Corbet" +,Title="Relocating RCU callbacks" +,month="October" +,day="31" +,year="2012" +,note="\url{http://lwn.net/Articles/522262/}" +,annotation={ + Overview of the first variant of no-CBs CPUs for RCU. +} +} + +@phdthesis{JustinSeyster2012PhD +,author="Justin Seyster" +,title="Runtime Verification of Kernel-Level Concurrency Using Compiler-Based Instrumentation" +,school="Stony Brook University" +,year="2012" +,annotation={ + Looking for data races, including those involving RCU. + Proposal: + http://www.fsl.cs.sunysb.edu/docs/jseyster-proposal/redflag.pdf + Dissertation: + http://www.fsl.cs.sunysb.edu/docs/jseyster-dissertation/redflag.pdf +} +} + +@unpublished{PaulEMcKenney2013RCUUsage +,Author="Paul E. McKenney and Silas Boyd-Wickizer and Jonathan Walpole" +,Title="{RCU} Usage in the {Linux} Kernel: One Decade Later" +,month="February" +,day="24" +,year="2013" +,note="\url{http://rdrop.com/users/paulmck/techreports/RCUUsage.2013.02.24a.pdf}" +,annotation={ + Usage of RCU within the Linux kernel. +} +} + +@inproceedings{AlexeyGotsman2013ESOPRCU +,author = {Alexey Gotsman and Noam Rinetzky and Hongseok Yang} +,title = {Verifying concurrent memory reclamation algorithms with grace} +,booktitle = {ESOP'13: European Symposium on Programming} +,year = {2013} +,pages = {249--269} +,publisher = {Springer} +,address = {Rome, Italy} +,annotation={ + http://software.imdea.org/~gotsman/papers/recycling-esop13.pdf +} +} + +@unpublished{PaulEMcKenney2013NoTinyPreempt +,Author="Paul E. McKenney" +,Title="Simplifying RCU" +,month="March" +,day="6" +,year="2013" +,note="\url{http://lwn.net/Articles/541037/}" +,annotation={ + Getting rid of TINY_PREEMPT_RCU. } } diff --git a/Documentation/RCU/rcubarrier.txt b/Documentation/RCU/rcubarrier.txt index 2e319d1b9ef28c0d9c19505306063cfc6bc9f595..b10cfe711e68e48fe6d516ea531126dfc947fc13 100644 --- a/Documentation/RCU/rcubarrier.txt +++ b/Documentation/RCU/rcubarrier.txt @@ -70,10 +70,14 @@ in realtime kernels in order to avoid excessive scheduling latencies. rcu_barrier() -We instead need the rcu_barrier() primitive. This primitive is similar -to synchronize_rcu(), but instead of waiting solely for a grace -period to elapse, it also waits for all outstanding RCU callbacks to -complete. Pseudo-code using rcu_barrier() is as follows: +We instead need the rcu_barrier() primitive. Rather than waiting for +a grace period to elapse, rcu_barrier() waits for all outstanding RCU +callbacks to complete. Please note that rcu_barrier() does -not- imply +synchronize_rcu(), in particular, if there are no RCU callbacks queued +anywhere, rcu_barrier() is within its rights to return immediately, +without waiting for a grace period to elapse. + +Pseudo-code using rcu_barrier() is as follows: 1. Prevent any new RCU callbacks from being posted. 2. Execute rcu_barrier(). diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt index d8a50238739719b49aa0f04077860326cf98cc4d..dac02a6219b1cae3c657512b293b957627cec830 100644 --- a/Documentation/RCU/torture.txt +++ b/Documentation/RCU/torture.txt @@ -42,6 +42,16 @@ fqs_holdoff Holdoff time (in microseconds) between consecutive calls fqs_stutter Wait time (in seconds) between consecutive bursts of calls to force_quiescent_state(). +gp_normal Make the fake writers use normal synchronous grace-period + primitives. + +gp_exp Make the fake writers use expedited synchronous grace-period + primitives. If both gp_normal and gp_exp are set, or + if neither gp_normal nor gp_exp are set, then randomly + choose the primitive so that about 50% are normal and + 50% expedited. By default, neither are set, which + gives best overall test coverage. + irqreader Says to invoke RCU readers from irq level. This is currently done via timers. Defaults to "1" for variants of RCU that permit this. (Or, more accurately, variants of RCU that do diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 6e97e73d87b507a996767c82bbf0fb6237bf7617..26b1e31d5a13e63a95fc68c5a0cb66daf744ab8f 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -109,6 +109,16 @@ probably didn't even receive earlier versions of the patch. If the patch fixes a logged bug entry, refer to that bug entry by number and URL. +If you want to refer to a specific commit, don't just refer to the +SHA-1 ID of the commit. Please also include the oneline summary of +the commit, to make it easier for reviewers to know what it is about. +Example: + + Commit e21d2170f36602ae2708 ("video: remove unnecessary + platform_set_drvdata()") removed the unnecessary + platform_set_drvdata(), but left the variable "dev" unused, + delete it. + 3) Separate your changes. diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index d9be7a97dff35e7b1521e709e8a29c278d3fb434..aca4e69121b7a2bb8ab38d2002066bcab49af915 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -207,7 +207,7 @@ passing those. One idea is to return this in _DSM method like: Return (Local0) } -Then the at25 SPI driver can get this configation by calling _DSM on its +Then the at25 SPI driver can get this configuration by calling _DSM on its ACPI handle like: struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; @@ -228,19 +228,9 @@ ACPI handle like: I2C serial bus support ~~~~~~~~~~~~~~~~~~~~~~ The slaves behind I2C bus controller only need to add the ACPI IDs like -with the platform and SPI drivers. However the I2C bus controller driver -needs to call acpi_i2c_register_devices() after it has added the adapter. - -An I2C bus (controller) driver does: - - ... - ret = i2c_add_numbered_adapter(adapter); - if (ret) - /* handle error */ - - of_i2c_register_devices(adapter); - /* Enumerate the slave devices behind this bus via ACPI */ - acpi_i2c_register_devices(adapter); +with the platform and SPI drivers. The I2C core automatically enumerates +any slave devices behind the controller device once the adapter is +registered. Below is an example of how to add ACPI support to the existing mpu3050 input driver: diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting index 0c1f475fdf36e140d28bcdc26d880546f8a8bdc4..371814a36719f7979402f41c63ca3609fcdae6a9 100644 --- a/Documentation/arm/Booting +++ b/Documentation/arm/Booting @@ -18,7 +18,8 @@ following: 2. Initialise one serial port. 3. Detect the machine type. 4. Setup the kernel tagged list. -5. Call the kernel image. +5. Load initramfs. +6. Call the kernel image. 1. Setup and initialise RAM @@ -120,12 +121,27 @@ tagged list. The boot loader must pass at a minimum the size and location of the system memory, and the root filesystem location. The dtb must be placed in a region of memory where the kernel decompressor will not -overwrite it. The recommended placement is in the first 16KiB of RAM -with the caveat that it may not be located at physical address 0 since -the kernel interprets a value of 0 in r2 to mean neither a tagged list -nor a dtb were passed. +overwrite it, whilst remaining within the region which will be covered +by the kernel's low-memory mapping. -5. Calling the kernel image +A safe location is just above the 128MiB boundary from start of RAM. + +5. Load initramfs. +------------------ + +Existing boot loaders: OPTIONAL +New boot loaders: OPTIONAL + +If an initramfs is in use then, as with the dtb, it must be placed in +a region of memory where the kernel decompressor will not overwrite it +while also with the region which will be covered by the kernel's +low-memory mapping. + +A safe location is just above the device tree blob which itself will +be loaded just above the 128MiB boundary from the start of RAM as +recommended above. + +6. Calling the kernel image --------------------------- Existing boot loaders: MANDATORY @@ -136,11 +152,17 @@ is stored in flash, and is linked correctly to be run from flash, then it is legal for the boot loader to call the zImage in flash directly. -The zImage may also be placed in system RAM (at any location) and -called there. Note that the kernel uses 16K of RAM below the image -to store page tables. The recommended placement is 32KiB into RAM. +The zImage may also be placed in system RAM and called there. The +kernel should be placed in the first 128MiB of RAM. It is recommended +that it is loaded above 32MiB in order to avoid the need to relocate +prior to decompression, which will make the boot process slightly +faster. + +When booting a raw (non-zImage) kernel the constraints are tighter. +In this case the kernel must be loaded at an offset into system equal +to TEXT_OFFSET - PAGE_OFFSET. -In either case, the following conditions must be met: +In any case, the following conditions must be met: - Quiesce all DMA capable devices so that memory does not get corrupted by bogus network packets or disk data. This will save diff --git a/Documentation/arm/OMAP/omap_pm b/Documentation/arm/OMAP/omap_pm index 9012bb03909443e4978d9d3a9fd6bbf0f095d907..4ae915a9f899cb7f34cb2bf13e6b1b79994d06e2 100644 --- a/Documentation/arm/OMAP/omap_pm +++ b/Documentation/arm/OMAP/omap_pm @@ -78,7 +78,7 @@ to NULL. Drivers should use the following idiom: The most common usage of these functions will probably be to specify the maximum time from when an interrupt occurs, to when the device becomes accessible. To accomplish this, driver writers should use the -set_max_mpu_wakeup_lat() function to to constrain the MPU wakeup +set_max_mpu_wakeup_lat() function to constrain the MPU wakeup latency, and the set_max_dev_wakeup_lat() function to constrain the device wakeup latency (from clk_enable() to accessibility). For example, diff --git a/Documentation/arm/kernel_mode_neon.txt b/Documentation/arm/kernel_mode_neon.txt new file mode 100644 index 0000000000000000000000000000000000000000..525452726d31e94c43d7c8c7c05c4431b006912a --- /dev/null +++ b/Documentation/arm/kernel_mode_neon.txt @@ -0,0 +1,121 @@ +Kernel mode NEON +================ + +TL;DR summary +------------- +* Use only NEON instructions, or VFP instructions that don't rely on support + code +* Isolate your NEON code in a separate compilation unit, and compile it with + '-mfpu=neon -mfloat-abi=softfp' +* Put kernel_neon_begin() and kernel_neon_end() calls around the calls into your + NEON code +* Don't sleep in your NEON code, and be aware that it will be executed with + preemption disabled + + +Introduction +------------ +It is possible to use NEON instructions (and in some cases, VFP instructions) in +code that runs in kernel mode. However, for performance reasons, the NEON/VFP +register file is not preserved and restored at every context switch or taken +exception like the normal register file is, so some manual intervention is +required. Furthermore, special care is required for code that may sleep [i.e., +may call schedule()], as NEON or VFP instructions will be executed in a +non-preemptible section for reasons outlined below. + + +Lazy preserve and restore +------------------------- +The NEON/VFP register file is managed using lazy preserve (on UP systems) and +lazy restore (on both SMP and UP systems). This means that the register file is +kept 'live', and is only preserved and restored when multiple tasks are +contending for the NEON/VFP unit (or, in the SMP case, when a task migrates to +another core). Lazy restore is implemented by disabling the NEON/VFP unit after +every context switch, resulting in a trap when subsequently a NEON/VFP +instruction is issued, allowing the kernel to step in and perform the restore if +necessary. + +Any use of the NEON/VFP unit in kernel mode should not interfere with this, so +it is required to do an 'eager' preserve of the NEON/VFP register file, and +enable the NEON/VFP unit explicitly so no exceptions are generated on first +subsequent use. This is handled by the function kernel_neon_begin(), which +should be called before any kernel mode NEON or VFP instructions are issued. +Likewise, the NEON/VFP unit should be disabled again after use to make sure user +mode will hit the lazy restore trap upon next use. This is handled by the +function kernel_neon_end(). + + +Interruptions in kernel mode +---------------------------- +For reasons of performance and simplicity, it was decided that there shall be no +preserve/restore mechanism for the kernel mode NEON/VFP register contents. This +implies that interruptions of a kernel mode NEON section can only be allowed if +they are guaranteed not to touch the NEON/VFP registers. For this reason, the +following rules and restrictions apply in the kernel: +* NEON/VFP code is not allowed in interrupt context; +* NEON/VFP code is not allowed to sleep; +* NEON/VFP code is executed with preemption disabled. + +If latency is a concern, it is possible to put back to back calls to +kernel_neon_end() and kernel_neon_begin() in places in your code where none of +the NEON registers are live. (Additional calls to kernel_neon_begin() should be +reasonably cheap if no context switch occurred in the meantime) + + +VFP and support code +-------------------- +Earlier versions of VFP (prior to version 3) rely on software support for things +like IEEE-754 compliant underflow handling etc. When the VFP unit needs such +software assistance, it signals the kernel by raising an undefined instruction +exception. The kernel responds by inspecting the VFP control registers and the +current instruction and arguments, and emulates the instruction in software. + +Such software assistance is currently not implemented for VFP instructions +executed in kernel mode. If such a condition is encountered, the kernel will +fail and generate an OOPS. + + +Separating NEON code from ordinary code +--------------------------------------- +The compiler is not aware of the special significance of kernel_neon_begin() and +kernel_neon_end(), i.e., that it is only allowed to issue NEON/VFP instructions +between calls to these respective functions. Furthermore, GCC may generate NEON +instructions of its own at -O3 level if -mfpu=neon is selected, and even if the +kernel is currently compiled at -O2, future changes may result in NEON/VFP +instructions appearing in unexpected places if no special care is taken. + +Therefore, the recommended and only supported way of using NEON/VFP in the +kernel is by adhering to the following rules: +* isolate the NEON code in a separate compilation unit and compile it with + '-mfpu=neon -mfloat-abi=softfp'; +* issue the calls to kernel_neon_begin(), kernel_neon_end() as well as the calls + into the unit containing the NEON code from a compilation unit which is *not* + built with the GCC flag '-mfpu=neon' set. + +As the kernel is compiled with '-msoft-float', the above will guarantee that +both NEON and VFP instructions will only ever appear in designated compilation +units at any optimization level. + + +NEON assembler +-------------- +NEON assembler is supported with no additional caveats as long as the rules +above are followed. + + +NEON code generated by GCC +-------------------------- +The GCC option -ftree-vectorize (implied by -O3) tries to exploit implicit +parallelism, and generates NEON code from ordinary C source code. This is fully +supported as long as the rules above are followed. + + +NEON intrinsics +--------------- +NEON intrinsics are also supported. However, as code using NEON intrinsics +relies on the GCC header , (which #includes ), you should +observe the following in addition to the rules above: +* Compile the unit containing the NEON intrinsics with '-ffreestanding' so GCC + uses its builtin version of (this is a C99 header which the kernel + does not supply); +* Include last, or at least after diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt index 9c4d388daddc2f32411cdf341a8c7649079cbba6..98df4a03807e7c4ab02c7a27f4c46272f3bd12df 100644 --- a/Documentation/arm64/booting.txt +++ b/Documentation/arm64/booting.txt @@ -45,9 +45,9 @@ sees fit.) Requirement: MANDATORY -The device tree blob (dtb) must be no bigger than 2 megabytes in size -and placed at a 2-megabyte boundary within the first 512 megabytes from -the start of the kernel image. This is to allow the kernel to map the +The device tree blob (dtb) must be placed on an 8-byte boundary within +the first 512 megabytes from the start of the kernel image and must not +cross a 2-megabyte boundary. This is to allow the kernel to map the blob using a single section mapping in the initial page tables. @@ -68,13 +68,23 @@ Image target is available instead. Requirement: MANDATORY -The decompressed kernel image contains a 32-byte header as follows: +The decompressed kernel image contains a 64-byte header as follows: - u32 magic = 0x14000008; /* branch to stext, little-endian */ - u32 res0 = 0; /* reserved */ + u32 code0; /* Executable code */ + u32 code1; /* Executable code */ u64 text_offset; /* Image load offset */ + u64 res0 = 0; /* reserved */ u64 res1 = 0; /* reserved */ u64 res2 = 0; /* reserved */ + u64 res3 = 0; /* reserved */ + u64 res4 = 0; /* reserved */ + u32 magic = 0x644d5241; /* Magic number, little endian, "ARM\x64" */ + u32 res5 = 0; /* reserved */ + + +Header notes: + +- code0/code1 are responsible for branching to stext. The image must be placed at the specified offset (currently 0x80000) from the start of the system RAM and called there. The start of the diff --git a/Documentation/arm64/tagged-pointers.txt b/Documentation/arm64/tagged-pointers.txt new file mode 100644 index 0000000000000000000000000000000000000000..264e9841563aa6ebb162b545fb3442b85f00c38b --- /dev/null +++ b/Documentation/arm64/tagged-pointers.txt @@ -0,0 +1,34 @@ + Tagged virtual addresses in AArch64 Linux + ========================================= + +Author: Will Deacon +Date : 12 June 2013 + +This document briefly describes the provision of tagged virtual +addresses in the AArch64 translation system and their potential uses +in AArch64 Linux. + +The kernel configures the translation tables so that translations made +via TTBR0 (i.e. userspace mappings) have the top byte (bits 63:56) of +the virtual address ignored by the translation hardware. This frees up +this byte for application use, with the following caveats: + + (1) The kernel requires that all user addresses passed to EL1 + are tagged with tag 0x00. This means that any syscall + parameters containing user virtual addresses *must* have + their top byte cleared before trapping to the kernel. + + (2) Tags are not guaranteed to be preserved when delivering + signals. This means that signal handlers in applications + making use of tags cannot rely on the tag information for + user virtual addresses being maintained for fields inside + siginfo_t. One exception to this rule is for signals raised + in response to debug exceptions, where the tag information + will be preserved. + + (3) Special care should be taken when using tagged pointers, + since it is likely that C compilers will not hazard two + addresses differing only in the upper bits. + +The architecture prevents the use of a tagged PC, so the upper byte will +be set to a sign-extension of bit 55 on exception return. diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt index 9887f0414c16642d204296d9c0b8abdc8096a5da..f3bc72945cbd3827872e4e25163830e3fef72571 100644 --- a/Documentation/block/cfq-iosched.txt +++ b/Documentation/block/cfq-iosched.txt @@ -69,7 +69,7 @@ one, this value should be decreased relative to fifo_expire_async. group_idle ----------- This parameter forces idling at the CFQ group level instead of CFQ -queue level. This was introduced after after a bottleneck was observed +queue level. This was introduced after a bottleneck was observed in higher end storage due to idle on sequential queue and allow dispatch from a single queue. The idea with this parameter is that it can be run with slice_idle=0 and group_idle=8, so that idling does not happen on individual diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt index 9b728dc17535f6f8c1630fe2e8f3a96e997feac9..d79b008e4a32896d86a8375d163757fcb8f5aa6f 100644 --- a/Documentation/cachetlb.txt +++ b/Documentation/cachetlb.txt @@ -57,7 +57,7 @@ changes occur: interface must make sure that any previous page table modifications for the address space 'vma->vm_mm' in the range 'start' to 'end-1' will be visible to the cpu. That is, after - running, here will be no entries in the TLB for 'mm' for + running, there will be no entries in the TLB for 'mm' for virtual addresses in the range 'start' to 'end-1'. The "vma" is the backing store being used for the region. @@ -375,8 +375,8 @@ maps this page at its virtual address. void flush_icache_page(struct vm_area_struct *vma, struct page *page) All the functionality of flush_icache_page can be implemented in - flush_dcache_page and update_mmu_cache. In 2.7 the hope is to - remove this interface completely. + flush_dcache_page and update_mmu_cache. In the future, the hope + is to remove this interface completely. The final category of APIs is for I/O to deliberately aliased address ranges inside the kernel. Such aliases are set up by use of the diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt index 19fa98e07bf7fe79f403042d14858677f4474839..40282e6179135abc353bc8b04a86137820794468 100644 --- a/Documentation/cpu-freq/cpu-drivers.txt +++ b/Documentation/cpu-freq/cpu-drivers.txt @@ -50,8 +50,6 @@ What shall this struct cpufreq_driver contain? cpufreq_driver.name - The name of this driver. -cpufreq_driver.owner - THIS_MODULE; - cpufreq_driver.init - A pointer to the per-CPU initialization function. diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt index 902d3151f527919ab190d8f30ff9253e3da2c8d0..0aad6deb2d9638e3b0d7bf16db928e1bd0b80d8b 100644 --- a/Documentation/cputopology.txt +++ b/Documentation/cputopology.txt @@ -22,7 +22,7 @@ to /proc/cpuinfo. 4) /sys/devices/system/cpu/cpuX/topology/thread_siblings: - internel kernel map of cpuX's hardware threads within the same + internal kernel map of cpuX's hardware threads within the same core as cpuX 5) /sys/devices/system/cpu/cpuX/topology/core_siblings: diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process index 4823577c65092f967ef3d46eb024fa8a1366ab7e..2e0617936e8f7f7624d0920be7ff3ae3d6217f68 100644 --- a/Documentation/development-process/2.Process +++ b/Documentation/development-process/2.Process @@ -276,7 +276,7 @@ mainline get there via -mm. The current -mm patch is available in the "mmotm" (-mm of the moment) directory at: - http://userweb.kernel.org/~akpm/mmotm/ + http://www.ozlabs.org/~akpm/mmotm/ Use of the MMOTM tree is likely to be a frustrating experience, though; there is a definite chance that it will not even compile. @@ -287,7 +287,7 @@ the mainline is expected to look like after the next merge window closes. Linux-next trees are announced on the linux-kernel and linux-next mailing lists when they are assembled; they can be downloaded from: - http://www.kernel.org/pub/linux/kernel/people/sfr/linux-next/ + http://www.kernel.org/pub/linux/kernel/next/ Some information about linux-next has been gathered at: diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt index 20746e5abe6f1da4489c0c29bc00fa1472ac64e4..06fc7602593a9d38a4cec97538948b03b5ce2676 100644 --- a/Documentation/devicetree/bindings/arm/arch_timer.txt +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt @@ -1,10 +1,14 @@ * ARM architected timer -ARM cores may have a per-core architected timer, which provides per-cpu timers. +ARM cores may have a per-core architected timer, which provides per-cpu timers, +or a memory mapped architected timer, which provides up to 8 frames with a +physical and optional virtual timer per frame. -The timer is attached to a GIC to deliver its per-processor interrupts. +The per-core architected timer is attached to a GIC to deliver its +per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC +to deliver its interrupts via SPIs. -** Timer node properties: +** CP15 Timer node properties: - compatible : Should at least contain one of "arm,armv7-timer" @@ -26,3 +30,52 @@ Example: <1 10 0xf08>; clock-frequency = <100000000>; }; + +** Memory mapped timer node properties: + +- compatible : Should at least contain "arm,armv7-timer-mem". + +- clock-frequency : The frequency of the main counter, in Hz. Optional. + +- reg : The control frame base address. + +Note that #address-cells, #size-cells, and ranges shall be present to ensure +the CPU can address a frame's registers. + +A timer node has up to 8 frame sub-nodes, each with the following properties: + +- frame-number: 0 to 7. + +- interrupts : Interrupt list for physical and virtual timers in that order. + The virtual timer interrupt is optional. + +- reg : The first and second view base addresses in that order. The second view + base address is optional. + +- status : "disabled" indicates the frame is not available for use. Optional. + +Example: + + timer@f0000000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0xf0000000 0x1000>; + clock-frequency = <50000000>; + + frame@f0001000 { + frame-number = <0> + interrupts = <0 13 0x8>, + <0 14 0x8>; + reg = <0xf0001000 0x1000>, + <0xf0002000 0x1000>; + }; + + frame@f0003000 { + frame-number = <1> + interrupts = <0 15 0x8>; + reg = <0xf0003000 0x1000>; + status = "disabled"; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt index 16769d9cedd633cccbf3d5fe88e2c8818a8d27c9..723c205cb10d840e13a75be509ff0a06c37721bc 100644 --- a/Documentation/devicetree/bindings/arm/atmel-adc.txt +++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt @@ -1,18 +1,15 @@ * AT91's Analog to Digital Converter (ADC) Required properties: - - compatible: Should be "atmel,at91sam9260-adc" + - compatible: Should be "atmel,-adc" + can be "at91sam9260", "at91sam9g45" or "at91sam9x5" - reg: Should contain ADC registers location and length - interrupts: Should contain the IRQ line for the ADC - - atmel,adc-channel-base: Offset of the first channel data register - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this device - - atmel,adc-drdy-mask: Mask of the DRDY interruption in the ADC - atmel,adc-num-channels: Number of channels available in the ADC - atmel,adc-startup-time: Startup Time of the ADC in microseconds as defined in the datasheet - - atmel,adc-status-register: Offset of the Interrupt Status Register - - atmel,adc-trigger-register: Offset of the Trigger Register - atmel,adc-vref: Reference voltage in millivolts for the conversions - atmel,adc-res: List of resolution in bits supported by the ADC. List size must be two at least. diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm11351.txt b/Documentation/devicetree/bindings/arm/bcm/bcm11351.txt index fb7b5cd2652f412b5a0b09615506c12938ac121b..0ff6560e6094717b93a57219d7b8a07b5a6ef3ab 100644 --- a/Documentation/devicetree/bindings/arm/bcm/bcm11351.txt +++ b/Documentation/devicetree/bindings/arm/bcm/bcm11351.txt @@ -6,4 +6,5 @@ bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties: Required root node property: -compatible = "bcm,bcm11351"; +compatible = "brcm,bcm11351"; +DEPRECATED: compatible = "bcm,bcm11351"; diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt similarity index 80% rename from Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt rename to Documentation/devicetree/bindings/arm/bcm/kona-timer.txt index 59fa6e68d4f69a2a6652bffe28b186fe66b5e42e..17d88b233d1bce30a6d0f6a1752181936dc2a07e 100644 --- a/Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt +++ b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt @@ -4,14 +4,15 @@ This timer is used in the following Broadcom SoCs: BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 Required properties: -- compatible : "bcm,kona-timer" +- compatible : "brcm,kona-timer" +- DEPRECATED: compatible : "bcm,kona-timer" - reg : Register range for the timer - interrupts : interrupt for the timer - clock-frequency: frequency that the clock operates Example: timer@35006000 { - compatible = "bcm,kona-timer"; + compatible = "brcm,kona-timer"; reg = <0x35006000 0x1000>; interrupts = <0x0 7 0x4>; clock-frequency = <32768>; diff --git a/Documentation/devicetree/bindings/arm/bcm/kona-wdt.txt b/Documentation/devicetree/bindings/arm/bcm/kona-wdt.txt new file mode 100644 index 0000000000000000000000000000000000000000..2b86a00e351d3725c021fd9754deaa393cf99ba6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/kona-wdt.txt @@ -0,0 +1,15 @@ +Broadcom Kona Family Watchdog Timer +----------------------------------- + +This watchdog timer is used in the following Broadcom SoCs: + BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 + +Required properties: + - compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt"; + - reg: memory address & range + +Example: + watchdog@35002f40 { + compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt"; + reg = <0x35002f40 0x6c>; + }; diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt index 69ddf9fad2dcccc36bbaa330b96170d2eb9b213d..c0c7626fd0ff760075c2c97c866c9f83cdb21819 100644 --- a/Documentation/devicetree/bindings/arm/l2cc.txt +++ b/Documentation/devicetree/bindings/arm/l2cc.txt @@ -16,9 +16,11 @@ Required properties: performs the same operation). "marvell,"aurora-outer-cache: Marvell Controller designed to be compatible with the ARM one with outer cache mode. - "bcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an + "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an offset needs to be added to the address before passing down to the L2 cache controller + "bcm,bcm11351-a2-pl310-cache": DEPRECATED by + "brcm,bcm11351-a2-pl310-cache" - cache-unified : Specifies the cache is a unified cache. - cache-level : Should be set to 2 for a level 2 cache. - reg : Physical base address and size of cache controller's memory mapped diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 6d498c758b450a2c1a6b2d40271ef17df0298a23..91b7049affa1ea5f5e0da13b52db79212c94ca52 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -59,3 +59,6 @@ Boards: - AM43x EPOS EVM compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43" + +- DRA7 EVM: Software Developement Board for DRA7XX + compatible = "ti,dra7-evm", "ti,dra7" diff --git a/Documentation/devicetree/bindings/arm/ste-u300.txt b/Documentation/devicetree/bindings/arm/ste-u300.txt index 69b5ab0b5f4b4eb4f330b820900d2eebf2dbf898..d11d80006a19037b50d0922054185ffe6371373c 100644 --- a/Documentation/devicetree/bindings/arm/ste-u300.txt +++ b/Documentation/devicetree/bindings/arm/ste-u300.txt @@ -22,7 +22,7 @@ This contains the board-specific information. - compatible: must be "stericsson,s365". - vana15-supply: the regulator supplying the 1.5V to drive the board. -- syscon: a pointer to the syscon node so we can acccess the +- syscon: a pointer to the syscon node so we can access the syscon registers to set the board as self-powered. Example: diff --git a/Documentation/devicetree/bindings/arm/vexpress-scc.txt b/Documentation/devicetree/bindings/arm/vexpress-scc.txt new file mode 100644 index 0000000000000000000000000000000000000000..ae5043e42e5d5986bc161fba63cc1c2483e6284a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vexpress-scc.txt @@ -0,0 +1,33 @@ +ARM Versatile Express Serial Configuration Controller +----------------------------------------------------- + +Test chips for ARM Versatile Express platform implement SCC (Serial +Configuration Controller) interface, used to set initial conditions +for the test chip. + +In some cases its registers are also mapped in normal address space +and can be used to obtain runtime information about the chip internals +(like silicon temperature sensors) and as interface to other subsystems +like platform configuration control and power management. + +Required properties: + +- compatible value: "arm,vexpress-scc,", "arm,vexpress-scc"; + where is the full tile model name (as used + in the tile's Technical Reference Manual), + eg. for Coretile Express A15x2 A7x3 (V2P-CA15_A7): + compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc"; + +Optional properties: + +- reg: when the SCC is memory mapped, physical address and size of the + registers window +- interrupts: when the SCC can generate a system-level interrupt + +Example: + + scc@7fff0000 { + compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc"; + reg = <0 0x7fff0000 0 0x1000>; + interrupts = <0 95 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt index 9cf3f25544c794607e07e331f35752d8f59d578c..5580e9c4bd8584034a9d9812c491962f08fa253e 100644 --- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt +++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt @@ -32,8 +32,8 @@ numbers - see motherboard's TRM for more details. The node describing a config device must refer to the sysreg node via "arm,vexpress,config-bridge" phandle (can be also defined in the node's parent) and relies on the board topology properties - see main vexpress -node documentation for more details. It must must also define the -following property: +node documentation for more details. It must also define the following +property: - arm,vexpress-sysreg,func : must contain two cells: - first cell defines function number (eg. 1 for clock generator, 2 for voltage regulators etc.) diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 3ec0c5c4f0e91da8b520de71996fa6637de05705..89de1564950ce64cf2bdb1e087da04e2043a0db6 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -4,27 +4,17 @@ SATA nodes are defined to describe on-chip Serial ATA controllers. Each SATA controller should have its own node. Required properties: -- compatible : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci" +- compatible : compatible list, contains "snps,spear-ahci" - interrupts : - reg : Optional properties: -- calxeda,port-phys: phandle-combophy and lane assignment, which maps each - SATA port to a combophy and a lane within that - combophy -- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off, - which indicates that the driver supports SGPIO - indicator lights using the indicated GPIOs -- calxeda,led-order : a u32 array that map port numbers to offsets within the - SGPIO bitstream. - dma-coherent : Present if dma operations are coherent Example: sata@ffe08000 { - compatible = "calxeda,hb-ahci"; - reg = <0xffe08000 0x1000>; - interrupts = <115>; - calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 - &combophy0 2 &combophy0 3>; + compatible = "snps,spear-ahci"; + reg = <0xffe08000 0x1000>; + interrupts = <115>; }; diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt new file mode 100644 index 0000000000000000000000000000000000000000..aa83407cb7a4404e0cc57f20d13f81c9cc749230 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/sata_highbank.txt @@ -0,0 +1,44 @@ +* Calxeda AHCI SATA Controller + +SATA nodes are defined to describe on-chip Serial ATA controllers. +The Calxeda SATA controller mostly conforms to the AHCI interface +with some special extensions to add functionality. +Each SATA controller should have its own node. + +Required properties: +- compatible : compatible list, contains "calxeda,hb-ahci" +- interrupts : +- reg : + +Optional properties: +- dma-coherent : Present if dma operations are coherent +- calxeda,port-phys : phandle-combophy and lane assignment, which maps each + SATA port to a combophy and a lane within that + combophy +- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off, + which indicates that the driver supports SGPIO + indicator lights using the indicated GPIOs +- calxeda,led-order : a u32 array that map port numbers to offsets within the + SGPIO bitstream. +- calxeda,tx-atten : a u32 array that contains TX attenuation override + codes, one per port. The upper 3 bytes are always + 0 and thus ignored. +- calxeda,pre-clocks : a u32 that indicates the number of additional clock + cycles to transmit before sending an SGPIO pattern +- calxeda,post-clocks: a u32 that indicates the number of additional clock + cycles to transmit after sending an SGPIO pattern + +Example: + sata@ffe08000 { + compatible = "calxeda,hb-ahci"; + reg = <0xffe08000 0x1000>; + interrupts = <115>; + dma-coherent; + calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 + &combophy0 2 &combophy0 3>; + calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>; + calxeda,led-order = <4 0 1 2 3>; + calxeda,tx-atten = <0xff 22 0xff 0xff 23>; + calxeda,pre-clocks = <10>; + calxeda,post-clocks = <0>; + }; diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt index cedc2a9c47851ffbfa1650cf7caa6c193a800db9..0fd76c405208472cf6f8ce5553cd1a2a986b52db 100644 --- a/Documentation/devicetree/bindings/bus/imx-weim.txt +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt @@ -8,7 +8,7 @@ The actual devices are instantiated from the child nodes of a WEIM node. Required properties: - - compatible: Should be set to "fsl,imx6q-weim" + - compatible: Should be set to "fsl,-weim" - reg: A resource specifier for the register space (see the example below) - clocks: the clock, see the example below. @@ -21,11 +21,18 @@ Required properties: Timing property for child nodes. It is mandatory, not optional. - - fsl,weim-cs-timing: The timing array, contains 6 timing values for the + - fsl,weim-cs-timing: The timing array, contains timing values for the child node. We can get the CS index from the child - node's "reg" property. This property contains the values - for the registers EIM_CSnGCR1, EIM_CSnGCR2, EIM_CSnRCR1, - EIM_CSnRCR2, EIM_CSnWCR1, EIM_CSnWCR2 in this order. + node's "reg" property. The number of registers depends + on the selected chip. + For i.MX1, i.MX21 ("fsl,imx1-weim") there are two + registers: CSxU, CSxL. + For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim") + there are three registers: CSCRxU, CSCRxL, CSCRxA. + For i.MX50, i.MX53 ("fsl,imx50-weim"), + i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim") + there are six registers: CSxGCR1, CSxGCR2, CSxRCR1, + CSxRCR2, CSxWCR1, CSxWCR2. Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM: diff --git a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt new file mode 100644 index 0000000000000000000000000000000000000000..7586fb68c07265917aa836a31c86140be8532f63 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt @@ -0,0 +1,276 @@ + +* Marvell MBus + +Required properties: + +- compatible: Should be set to one of the following: + marvell,armada370-mbus + marvell,armadaxp-mbus + marvell,armada370-mbus + marvell,armadaxp-mbus + marvell,kirkwood-mbus + marvell,dove-mbus + marvell,orion5x-88f5281-mbus + marvell,orion5x-88f5182-mbus + marvell,orion5x-88f5181-mbus + marvell,orion5x-88f6183-mbus + marvell,mv78xx0-mbus + +- address-cells: Must be '2'. The first cell for the MBus ID encoding, + the second cell for the address offset within the window. + +- size-cells: Must be '1'. + +- ranges: Must be set up to provide a proper translation for each child. + See the examples below. + +- controller: Contains a single phandle referring to the MBus controller + node. This allows to specify the node that contains the + registers that control the MBus, which is typically contained + within the internal register window (see below). + +Optional properties: + +- pcie-mem-aperture: This optional property contains the aperture for + the memory region of the PCIe driver. + If it's defined, it must encode the base address and + size for the address decoding windows allocated for + the PCIe memory region. + +- pcie-io-aperture: Just as explained for the above property, this + optional property contains the aperture for the + I/O region of the PCIe driver. + +* Marvell MBus controller + +Required properties: + +- compatible: Should be set to "marvell,mbus-controller". + +- reg: Device's register space. + Two entries are expected (see the examples below): + the first one controls the devices decoding window and + the second one controls the SDRAM decoding window. + +Example: + + soc { + compatible = "marvell,armada370-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + pcie-mem-aperture = <0xe0000000 0x8000000>; + pcie-io-aperture = <0xe8000000 0x100000>; + + internal-regs { + compatible = "simple-bus"; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>; + }; + + /* more children ...*/ + }; + }; + +** MBus address decoding window specification + +The MBus children address space is comprised of two cells: the first one for +the window ID and the second one for the offset within the window. +In order to allow to describe valid and non-valid window entries, the +following encoding is used: + + 0xSIAA0000 0x00oooooo + +Where: + + S = 0x0 for a MBus valid window + S = 0xf for a non-valid window (see below) + +If S = 0x0, then: + + I = 4-bit window target ID + AA = windpw attribute + +If S = 0xf, then: + + I = don't care + AA = 1 for internal register + +Following the above encoding, for each ranges entry for a MBus valid window +(S = 0x0), an address decoding window is allocated. On the other side, +entries for translation that do not correspond to valid windows (S = 0xf) +are skipped. + + soc { + compatible = "marvell,armada370-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + + ranges = <0xf0010000 0 0 0xd0000000 0x100000 + 0x01e00000 0 0 0xfff00000 0x100000>; + + bootrom { + compatible = "marvell,bootrom"; + reg = <0x01e00000 0 0x100000>; + }; + + /* other children */ + ... + + internal-regs { + compatible = "simple-bus"; + ranges = <0 0xf0010000 0 0x100000>; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>; + }; + + /* more children ...*/ + }; + }; + +In the shown example, the translation entry in the 'ranges' property is what +makes the MBus driver create a static decoding window for the corresponding +given child device. Note that the binding does not require child nodes to be +present. Of course, child nodes are needed to probe the devices. + +Since each window is identified by its target ID and attribute ID there's +a special macro that can be use to simplify the translation entries: + +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + +Using this macro, the above example would be: + + soc { + compatible = "marvell,armada370-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + + ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>; + + bootrom { + compatible = "marvell,bootrom"; + reg = ; + }; + + /* other children */ + ... + + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>; + }; + + /* other children */ + ... + }; + }; + + +** About the window base address + +Remember the MBus controller allows a great deal of flexibility for choosing +the decoding window base address. When planning the device tree layout it's +possible to choose any address as the base address, provided of course there's +a region large enough available, and with the required alignment. + +Yet in other words: there's nothing preventing us from setting a base address +of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is +unused. + +** Window allocation policy + +The mbus-node ranges property defines a set of mbus windows that are expected +to be set by the operating system and that are guaranteed to be free of overlaps +with one another or with the system memory ranges. + +Each entry in the property refers to exactly one window. If the operating system +choses to use a different set of mbus windows, it must ensure that any address +translations performed from downstream devices are adapted accordingly. + +The operating system may insert additional mbus windows that do not conflict +with the ones listed in the ranges, e.g. for mapping PCIe devices. +As a special case, the internal register window must be set up by the boot +loader at the address listed in the ranges property, since access to that region +is needed to set up the other windows. + +** Example + +See the example below, where a more complete device tree is shown: + + soc { + compatible = "marvell,armadaxp-mbus", "simple-bus"; + controller = <&mbusc>; + + ranges = ; + + bootrom { + compatible = "marvell,bootrom"; + reg = ; + }; + + devbus-bootcs { + status = "okay"; + ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>; + + /* NOR */ + nor { + compatible = "cfi-flash"; + reg = <0 0x8000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "okay"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */ + 0x81000800 0 0 MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>; + + + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; + + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + mbusc: mbus-controller@20000 { + reg = <0x20000 0x100>, <0x20180 0x20>; + }; + + interrupt-controller@20000 { + reg = <0x20a00 0x2d0>, <0x21070 0x58>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/c6x/dscr.txt b/Documentation/devicetree/bindings/c6x/dscr.txt index d847758f2b20c8b553d0cf8ab287219cfa858450..b0e97144cfb1c1b00ed41abd237cdcc54c0dc4c9 100644 --- a/Documentation/devicetree/bindings/c6x/dscr.txt +++ b/Documentation/devicetree/bindings/c6x/dscr.txt @@ -5,7 +5,7 @@ TI C6X SoCs contain a region of miscellaneous registers which provide various function for SoC control or status. Details vary considerably among from SoC to SoC with no two being alike. -In general, the Device State Configuraion Registers (DSCR) will provide one or +In general, the Device State Configuration Registers (DSCR) will provide one or more configuration registers often protected by a lock register where one or more key values must be written to a lock register in order to unlock the configuration register for writes. These configuration register may be used to diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt index a1201802f90d0d8fdcfd552c7d359c3cc7b79d31..75e2e1999f87dabdb7eccc94ba01d472533a69fd 100644 --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt @@ -2,7 +2,7 @@ The Samsung Audio Subsystem clock controller generates and supplies clocks to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock -binding described here is applicable to all SoC's in Exynos family. +binding described here is applicable to all SoCs in Exynos family. Required Properties: diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt index f46f5625d8ada4e907474d304a0ebd541f269acc..4c029a8739d3abae79c08ea1e100fc9b91efe642 100644 --- a/Documentation/devicetree/bindings/clock/imx5-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt @@ -197,6 +197,7 @@ clocks and IDs. spdif0_gate 183 spdif1_gate 184 spdif_ipg_gate 185 + ocram 186 Examples (for mx53): diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index a0e104f0527e058843c1f01a33997ff64d8f37cb..5a90a724b52069c793b65c8d20899cc304818abd 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -209,6 +209,12 @@ clocks and IDs. pll5_post_div 194 pll5_video_div 195 eim_slow 196 + spdif 197 + cko2_sel 198 + cko2_podf 199 + cko2 200 + cko 201 + vdoa 202 Examples: diff --git a/Documentation/devicetree/bindings/clock/st,nomadik.txt b/Documentation/devicetree/bindings/clock/st,nomadik.txt index 7fc09773de4688b56c081ab2e0a2738dadf2202a..40e0cf1f7b9911b5cb9450da49cab031d1dccada 100644 --- a/Documentation/devicetree/bindings/clock/st,nomadik.txt +++ b/Documentation/devicetree/bindings/clock/st,nomadik.txt @@ -17,7 +17,7 @@ Optional properties for the SRC node: - disable-mxtal: if present this will disable the MXTALO, i.e. the driver output for the main (~19.2 MHz) chrystal, if the board has its own circuitry for providing this - osciallator + oscillator PLL nodes: these nodes represent the two PLLs on the system, diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt new file mode 100644 index 0000000000000000000000000000000000000000..c0a20cd972e3d9950f8ef844fa93319665d8e38d --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt @@ -0,0 +1,157 @@ +SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM). +Currently Freescale powerpc chip C29X is embeded with SEC 6. +SEC 6 device tree binding include: + -SEC 6 Node + -Job Ring Node + -Full Example + +===================================================================== +SEC 6 Node + +Description + + Node defines the base address of the SEC 6 block. + This block specifies the address range of all global + configuration registers for the SEC 6 block. + For example, In C293, we could see three SEC 6 node. + +PROPERTIES + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,sec-v6.0". + + - fsl,sec-era + Usage: optional + Value type: + Definition: A standard property. Define the 'ERA' of the SEC + device. + + - #address-cells + Usage: required + Value type: + Definition: A standard property. Defines the number of cells + for representing physical addresses in child nodes. + + - #size-cells + Usage: required + Value type: + Definition: A standard property. Defines the number of cells + for representing the size of physical addresses in + child nodes. + + - reg + Usage: required + Value type: + Definition: A standard property. Specifies the physical + address and length of the SEC 6 configuration registers. + + - ranges + Usage: required + Value type: + Definition: A standard property. Specifies the physical address + range of the SEC 6.0 register space (-SNVS not included). A + triplet that includes the child address, parent address, & + length. + + Note: All other standard properties (see the ePAPR) are allowed + but are optional. + +EXAMPLE + crypto@a0000 { + compatible = "fsl,sec-v6.0"; + fsl,sec-era = <6>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xa0000 0x20000>; + ranges = <0 0xa0000 0x20000>; + }; + +===================================================================== +Job Ring (JR) Node + + Child of the crypto node defines data processing interface to SEC 6 + across the peripheral bus for purposes of processing + cryptographic descriptors. The specified address + range can be made visible to one (or more) cores. + The interrupt defined for this node is controlled within + the address range of this node. + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,sec-v6.0-job-ring". + + - reg + Usage: required + Value type: + Definition: Specifies a two JR parameters: an offset from + the parent physical address and the length the JR registers. + + - interrupts + Usage: required + Value type: + Definition: Specifies the interrupts generated by this + device. The value of the interrupts property + consists of one interrupt specifier. The format + of the specifier is defined by the binding document + describing the node's interrupt parent. + +EXAMPLE + jr@1000 { + compatible = "fsl,sec-v6.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <49 2 0 0>; + }; + +=================================================================== +Full Example + +Since some chips may contain more than one SEC, the dtsi contains +only the node contents, not the node itself. A chip using the SEC +should include the dtsi inside each SEC node. Example: + +In qoriq-sec6.0.dtsi: + + compatible = "fsl,sec-v6.0"; + fsl,sec-era = <6>; + #address-cells = <1>; + #size-cells = <1>; + + jr@1000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + }; + + jr@2000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + }; + +In the C293 device tree, we add the include of public property: + + crypto@a0000 { + /include/ "qoriq-sec6.0.dtsi" + } + + crypto@a0000 { + reg = <0xa0000 0x20000>; + ranges = <0 0xa0000 0x20000>; + + jr@1000 { + interrupts = <49 2 0 0>; + }; + + jr@2000 { + interrupts = <50 2 0 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt index c280a0e6f42dcb9bf4ccbf1549e7458856f4299f..e1f343c7a34b7b10ea462a39b5e9a320ef463ba6 100644 --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt @@ -18,14 +18,14 @@ dma0: dma@ffffec00 { DMA clients connected to the Atmel DMA controller must use the format described in the dma.txt file, using a three-cell specifier for each channel: -a phandle plus two interger cells. +a phandle plus two integer cells. The three cells in order are: 1. A phandle pointing to the DMA controller. 2. The memory interface (16 most significant bits), the peripheral interface (16 less significant bits). 3. Parameters for the at91 DMA configuration register which are device -dependant: +dependent: - bit 7-0: peripheral identifier for the hardware handshaking interface. The identifier can be different for tx and rx. - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP. diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt index 2717ecb47db9ac4a30448d4f6af6a361a9d8ec67..7bd8847d6394e6bbfb7df8b43eea2af4375cc883 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt @@ -34,7 +34,7 @@ Clients have to specify the DMA requests with phandles in a list. Required properties: - dmas: List of one or more DMA request specifiers. One DMA request specifier consists of a phandle to the DMA controller followed by the integer - specifiying the request line. + specifying the request line. - dma-names: List of string identifiers for the DMA requests. For the correct names, have a look at the specific client driver. diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index bea5b73a739009634c579d20e892c1c4a17ebc92..a8c21c256baa5afbcb4b1a43d150ca47a5c4e3ea 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -37,14 +37,14 @@ Each dmas request consists of 4 cells: 1. A phandle pointing to the DMA controller 2. Device Type 3. The DMA request line number (only when 'use fixed channel' is set) - 4. A 32bit mask specifying; mode, direction and endianess [NB: This list will grow] + 4. A 32bit mask specifying; mode, direction and endianness [NB: This list will grow] 0x00000001: Mode: Logical channel when unset Physical channel when set 0x00000002: Direction: Memory to Device when unset Device to Memory when set - 0x00000004: Endianess: + 0x00000004: Endianness: Little endian when unset Big endian when set 0x00000008: Use fixed channel: diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt similarity index 67% rename from Documentation/devicetree/bindings/extcon/extcon-twl.txt rename to Documentation/devicetree/bindings/extcon/extcon-palmas.txt index 58f531ab4df3709aa11d73f57e45be7e0d0c86bb..7dab6a8f4a0e46cf0590d50227ceeb99a0c40a5e 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-twl.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt @@ -1,15 +1,15 @@ -EXTCON FOR TWL CHIPS +EXTCON FOR PALMAS/TWL CHIPS PALMAS USB COMPARATOR Required Properties: - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" - - vbus-supply : phandle to the regulator device tree node. Optional Properties: - ti,wakeup : To enable the wakeup comparator in probe + - ti,enable-id-detection: Perform ID detection. + - ti,enable-vbus-detection: Perform VBUS detection. palmas-usb { compatible = "ti,twl6035-usb", "ti,palmas-usb"; - vbus-supply = <&smps10_reg>; ti,wakeup; }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt index 629d0ef17308a73c4f06e108218de8b7e7b4cb16..daa30174bcc13941e7454772dc2827c377a02a4b 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt @@ -3,10 +3,17 @@ Microchip MCP2308/MCP23S08/MCP23017/MCP23S17 driver for Required properties: - compatible : Should be - - "mcp,mcp23s08" for 8 GPIO SPI version - - "mcp,mcp23s17" for 16 GPIO SPI version - - "mcp,mcp23008" for 8 GPIO I2C version or - - "mcp,mcp23017" for 16 GPIO I2C version of the chip + - "mcp,mcp23s08" (DEPRECATED) for 8 GPIO SPI version + - "mcp,mcp23s17" (DEPRECATED) for 16 GPIO SPI version + - "mcp,mcp23008" (DEPRECATED) for 8 GPIO I2C version or + - "mcp,mcp23017" (DEPRECATED) for 16 GPIO I2C version of the chip + + - "microchip,mcp23s08" for 8 GPIO SPI version + - "microchip,mcp23s17" for 16 GPIO SPI version + - "microchip,mcp23008" for 8 GPIO I2C version or + - "microchip,mcp23017" for 16 GPIO I2C version of the chip + NOTE: Do not use the old mcp prefix any more. It is deprecated and will be + removed. - #gpio-cells : Should be two. - first cell is the pin number - second cell is used to specify flags. Flags are currently unused. @@ -15,10 +22,11 @@ Required properties: SPI uses this to specify the chipselect line which the chip is connected to. The driver and the SPI variant of the chip support multiple chips on the same chipselect. Have a look at - mcp,spi-present-mask below. + microchip,spi-present-mask below. Required device specific properties (only for SPI chips): -- mcp,spi-present-mask : This is a present flag, that makes only sense for SPI +- mcp,spi-present-mask (DEPRECATED) +- microchip,spi-present-mask : This is a present flag, that makes only sense for SPI chips - as the name suggests. Multiple SPI chips can share the same SPI chipselect. Set a bit in bit0-7 in this mask to 1 if there is a chip connected with the corresponding spi address set. For example if @@ -26,11 +34,13 @@ Required device specific properties (only for SPI chips): which is 0x08. mcp23s08 chip variant only supports bits 0-3. It is not possible to mix mcp23s08 and mcp23s17 on the same chipselect. Set at least one bit to 1 for SPI chips. + NOTE: Do not use the old mcp prefix any more. It is deprecated and will be + removed. - spi-max-frequency = The maximum frequency this chip is able to handle Example I2C: gpiom1: gpio@20 { - compatible = "mcp,mcp23017"; + compatible = "microchip,mcp23017"; gpio-controller; #gpio-cells = <2>; reg = <0x20>; @@ -38,7 +48,7 @@ gpiom1: gpio@20 { Example SPI: gpiom1: gpio@0 { - compatible = "mcp,mcp23s17"; + compatible = "microchip,mcp23s17"; gpio-controller; #gpio-cells = <2>; spi-present-mask = <0x01>; diff --git a/Documentation/devicetree/bindings/gpio/gpio-palmas.txt b/Documentation/devicetree/bindings/gpio/gpio-palmas.txt new file mode 100644 index 0000000000000000000000000000000000000000..08b5b52a3ae05f32c717a52910d141324c69478c --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-palmas.txt @@ -0,0 +1,27 @@ +Palmas GPIO controller bindings + +Required properties: +- compatible: + - "ti,palams-gpio" for palma series of the GPIO controller + - "ti,tps80036-gpio" for Palma series device TPS80036. + - "ti,tps65913-gpio" for palma series device TPS65913. + - "ti,tps65914-gpio" for palma series device TPS65914. +- #gpio-cells : Should be two. + - first cell is the gpio pin number + - second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low +- gpio-controller : Marks the device node as a GPIO controller. + +Note: This gpio node will be sub node of palmas node. + +Example: + palmas: tps65913@58 { + ::::::::::: + palmas_gpio: palmas_gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + ::::::::::: + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt new file mode 100644 index 0000000000000000000000000000000000000000..1fd98ffa8cb7cb921930219de6ed26c30a76a1e9 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt @@ -0,0 +1,45 @@ +ImgTec TZ1090 PDC GPIO Controller + +Required properties: +- compatible: Compatible property value should be "img,tz1090-pdc-gpio". + +- reg: Physical base address of the controller and length of memory mapped + region. This starts at and cover the SOC_GPIO_CONTROL registers. + +- gpio-controller: Specifies that the node is a gpio controller. + +- #gpio-cells: Should be 2. The syntax of the gpio specifier used by client + nodes should have the following values. + <[phandle of the gpio controller node] + [PDC gpio number] + [gpio flags]> + + Values for gpio specifier: + - GPIO number: a value in the range 0 to 6. + - GPIO flags: bit field of flags, as defined in . + Only the following flags are supported: + GPIO_ACTIVE_HIGH + GPIO_ACTIVE_LOW + +Optional properties: +- gpio-ranges: Mapping to pin controller pins (as described in + Documentation/devicetree/bindings/gpio/gpio.txt) + +- interrupts: Individual syswake interrupts (other GPIOs cannot interrupt) + + +Example: + + pdc_gpios: gpio-controller@02006500 { + gpio-controller; + #gpio-cells = <2>; + + compatible = "img,tz1090-pdc-gpio"; + reg = <0x02006500 0x100>; + + interrupt-parent = <&pdc>; + interrupts = <8 IRQ_TYPE_NONE>, /* Syswake 0 */ + <9 IRQ_TYPE_NONE>, /* Syswake 1 */ + <10 IRQ_TYPE_NONE>; /* Syswake 2 */ + gpio-ranges = <&pdc_pinctrl 0 0 7>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt new file mode 100644 index 0000000000000000000000000000000000000000..174cdf3091700406bd26cb6d324dc2ec04fb10e0 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt @@ -0,0 +1,88 @@ +ImgTec TZ1090 GPIO Controller + +Required properties: +- compatible: Compatible property value should be "img,tz1090-gpio". + +- reg: Physical base address of the controller and length of memory mapped + region. + +- #address-cells: Should be 1 (for bank subnodes) + +- #size-cells: Should be 0 (for bank subnodes) + +- Each bank of GPIOs should have a subnode to represent it. + + Bank subnode required properties: + - reg: Index of bank in the range 0 to 2. + + - gpio-controller: Specifies that the node is a gpio controller. + + - #gpio-cells: Should be 2. The syntax of the gpio specifier used by client + nodes should have the following values. + <[phandle of the gpio controller node] + [gpio number within the gpio bank] + [gpio flags]> + + Values for gpio specifier: + - GPIO number: a value in the range 0 to 29. + - GPIO flags: bit field of flags, as defined in . + Only the following flags are supported: + GPIO_ACTIVE_HIGH + GPIO_ACTIVE_LOW + + Bank subnode optional properties: + - gpio-ranges: Mapping to pin controller pins (as described in + Documentation/devicetree/bindings/gpio/gpio.txt) + + - interrupts: Interrupt for the entire bank + + - interrupt-controller: Specifies that the node is an interrupt controller + + - #interrupt-cells: Should be 2. The syntax of the interrupt specifier used by + client nodes should have the following values. + <[phandle of the interurupt controller] + [gpio number within the gpio bank] + [irq flags]> + + Values for irq specifier: + - GPIO number: a value in the range 0 to 29 + - IRQ flags: value to describe edge and level triggering, as defined in + . Only the following flags are + supported: + IRQ_TYPE_EDGE_RISING + IRQ_TYPE_EDGE_FALLING + IRQ_TYPE_EDGE_BOTH + IRQ_TYPE_LEVEL_HIGH + IRQ_TYPE_LEVEL_LOW + + + +Example: + + gpios: gpio-controller@02005800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "img,tz1090-gpio"; + reg = <0x02005800 0x90>; + + /* bank 0 with an interrupt */ + gpios0: bank@0 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + reg = <0>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 30>; + interrupt-controller; + }; + + /* bank 2 without interrupt */ + gpios2: bank@2 { + #gpio-cells = <2>; + reg = <2>; + gpio-controller; + gpio-ranges = <&pinctrl 0 60 30>; + }; + }; + + diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt index d933af37069791f8a0e15a6f31f5edf3358d6377..6cec6ff20d2e576ff51010389bcb494c4d2cd225 100644 --- a/Documentation/devicetree/bindings/gpio/gpio.txt +++ b/Documentation/devicetree/bindings/gpio/gpio.txt @@ -75,23 +75,36 @@ Example of two SOC GPIO banks defined as gpio-controller nodes: gpio-controller; }; -2.1) gpio-controller and pinctrl subsystem ------------------------------------------- +2.1) gpio- and pin-controller interaction +----------------------------------------- -gpio-controller on a SOC might be tightly coupled with the pinctrl -subsystem, in the sense that the pins can be used by other functions -together with optional gpio feature. +Some or all of the GPIOs provided by a GPIO controller may be routed to pins +on the package via a pin controller. This allows muxing those pins between +GPIO and other functions. -While the pin allocation is totally managed by the pin ctrl subsystem, -gpio (under gpiolib) is still maintained by gpio drivers. It may happen -that different pin ranges in a SoC is managed by different gpio drivers. +It is useful to represent which GPIOs correspond to which pins on which pin +controllers. The gpio-ranges property described below represents this, and +contains information structures as follows: -This makes it logical to let gpio drivers announce their pin ranges to -the pin ctrl subsystem and call 'pinctrl_request_gpio' in order to -request the corresponding pin before any gpio usage. + gpio-range-list ::= [gpio-range-list] + single-gpio-range ::= + + gpio-phandle : phandle to pin controller node. + gpio-base : Base GPIO ID in the GPIO controller + pinctrl-base : Base pinctrl pin ID in the pin controller + count : The number of GPIOs/pins in this range -For this, the gpio controller can use a pinctrl phandle and pins to -announce the pinrange to the pin ctrl subsystem. For example, +The "pin controller node" mentioned above must conform to the bindings +described in ../pinctrl/pinctrl-bindings.txt. + +Previous versions of this binding required all pin controller nodes that +were referenced by any gpio-ranges property to contain a property named +#gpio-range-cells with value <3>. This requirement is now deprecated. +However, that property may still exist in older device trees for +compatibility reasons, and would still be required even in new device +trees that need to be compatible with older software. + +Example: qe_pio_e: gpio-controller@1460 { #gpio-cells = <2>; @@ -99,16 +112,8 @@ announce the pinrange to the pin ctrl subsystem. For example, reg = <0x1460 0x18>; gpio-controller; gpio-ranges = <&pinctrl1 0 20 10>, <&pinctrl2 10 50 20>; + }; - } - -where, - &pinctrl1 and &pinctrl2 is the phandle to the pinctrl DT node. - - Next values specify the base pin and number of pins for the range - handled by 'qe_pio_e' gpio. In the given example from base pin 20 to - pin 29 under pinctrl1 with gpio offset 0 and pin 50 to pin 69 under - pinctrl2 with gpio offset 10 is handled by this gpio controller. - -The pinctrl node must have "#gpio-range-cells" property to show number of -arguments to pass with phandle from gpio controllers node. +Here, a single GPIO controller has GPIOs 0..9 routed to pin controller +pinctrl1's pins 20..29, and GPIOs 10..19 routed to pin controller pinctrl2's +pins 50..59. diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index 9b3f1d4a88d69fa931ca819c4776727435512104..66416261e14df5a0b621a52ead96e4ef52482472 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -10,8 +10,9 @@ Required properties: There're three gpio interrupts in arch-pxa, and they're gpio0, gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp, gpio_mux. -- interrupt-name : Should be the name of irq resource. Each interrupt - binds its interrupt-name. +- interrupt-names : Should be the names of irq resources. Each interrupt + uses its own interrupt name, so there should be as many interrupt names + as referenced interrups. - interrupt-controller : Identifies the node as an interrupt controller. - #interrupt-cells: Specifies the number of cells needed to encode an interrupt source. @@ -24,7 +25,7 @@ Example: compatible = "marvell,mmp-gpio"; reg = <0xd4019000 0x1000>; interrupts = <49>; - interrupt-name = "gpio_mux"; + interrupt-names = "gpio_mux"; gpio-controller; #gpio-cells = <1>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index cb3dc7bcd8e69f975279e2d91d8d87101f909672..8655df9440d506986225dad0594d045054a96728 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -23,6 +23,10 @@ Required Properties: Please refer to gpio.txt in this directory for details of gpio-ranges property and the common GPIO bindings used by client devices. +The GPIO controller also acts as an interrupt controller. It uses the default +two cells specifier as described in Documentation/devicetree/bindings/ +interrupt-controller/interrupts.txt. + Example: R8A7779 (R-Car H1) GPIO controller nodes gpio0: gpio@ffc40000 { @@ -33,6 +37,8 @@ Example: R8A7779 (R-Car H1) GPIO controller nodes #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; + interrupt-controller; + #interrupt-cells = <2>; }; ... gpio6: gpio@ffc46000 { @@ -43,4 +49,6 @@ Example: R8A7779 (R-Car H1) GPIO controller nodes #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 9>; + interrupt-controller; + #interrupt-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.txt b/Documentation/devicetree/bindings/gpu/samsung-rotator.txt new file mode 100644 index 0000000000000000000000000000000000000000..82cd1ed0be9317cef6b7ca457f5f904d9d0e16d7 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.txt @@ -0,0 +1,27 @@ +* Samsung Image Rotator + +Required properties: + - compatible : value should be one of the following: + (a) "samsung,exynos4210-rotator" for Rotator IP in Exynos4210 + (b) "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412 + (c) "samsung,exynos5250-rotator" for Rotator IP in Exynos5250 + + - reg : Physical base address of the IP registers and length of memory + mapped region. + + - interrupts : Interrupt specifier for rotator interrupt, according to format + specific to interrupt parent. + + - clocks : Clock specifier for rotator clock, according to generic clock + bindings. (See Documentation/devicetree/bindings/clock/exynos*.txt) + + - clock-names : Names of clocks. For exynos rotator, it should be "rotator". + +Example: + rotator@12810000 { + compatible = "samsung,exynos4210-rotator"; + reg = <0x12810000 0x1000>; + interrupts = <0 83 0>; + clocks = <&clock 278>; + clock-names = "rotator"; + }; diff --git a/Documentation/devicetree/bindings/hid/hid-over-i2c.txt b/Documentation/devicetree/bindings/hid/hid-over-i2c.txt new file mode 100644 index 0000000000000000000000000000000000000000..488edcb264c4fea49441bb21ea7deb02a0056882 --- /dev/null +++ b/Documentation/devicetree/bindings/hid/hid-over-i2c.txt @@ -0,0 +1,28 @@ +* HID over I2C Device-Tree bindings + +HID over I2C provides support for various Human Interface Devices over the +I2C bus. These devices can be for example touchpads, keyboards, touch screens +or sensors. + +The specification has been written by Microsoft and is currently available here: +http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx + +If this binding is used, the kernel module i2c-hid will handle the communication +with the device and the generic hid core layer will handle the protocol. + +Required properties: +- compatible: must be "hid-over-i2c" +- reg: i2c slave address +- hid-descr-addr: HID descriptor address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: interrupt line + +Example: + + i2c-hid-dev@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x0020>; + interrupt-parent = <&gpx3>; + interrupts = <3 2>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt index 3614242e77321d376b9411c2f3a6168408315605..4a8513e4474049072b0bdc65ead90cab2a9ce1ef 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt @@ -1,7 +1,10 @@ * Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX Required properties: -- compatible : Should be "fsl,-i2c" +- compatible : + - "fsl,imx1-i2c" for I2C compatible with the one integrated on i.MX1 SoC + - "fsl,imx21-i2c" for I2C compatible with the one integrated on i.MX21 SoC + - "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC - reg : Should contain I2C/HS-I2C registers location and length - interrupts : Should contain I2C/HS-I2C interrupt diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt index 6113f9275f42074d044199145b37d20feddf279e..82e8f6f17179b9b951e3d14f17d5a8b1671990ec 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt @@ -5,6 +5,7 @@ Required properties : - reg : Offset and length of the register set for the device - compatible : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c" + or "marvell,mv78230-i2c" - interrupts : The interrupt number Optional properties : @@ -20,3 +21,12 @@ Examples: interrupts = <29>; clock-frequency = <100000>; }; + +For the Armada XP: + + i2c@11000 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11000 0x100>; + interrupts = <29>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt new file mode 100644 index 0000000000000000000000000000000000000000..c5933573e0f6d920951da90806ab1900b905beb5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt @@ -0,0 +1,24 @@ +* Bosch BMA180 triaxial acceleration sensor + +http://omapworld.com/BMA180_111_1002839.pdf + +Required properties: + + - compatible : should be "bosch,bma180" + - reg : the I2C address of the sensor + +Optional properties: + + - interrupt-parent : should be the phandle for the interrupt controller + + - interrupts : interrupt mapping for GPIO IRQ, it should by configured with + flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING + +Example: + +bma180@40 { + compatible = "bosch,bma180"; + reg = <0x40>; + interrupt-parent = <&gpio6>; + interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt new file mode 100644 index 0000000000000000000000000000000000000000..e9582e6fe350035226c5d8366fdccf85cf49a0b2 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt @@ -0,0 +1,18 @@ +* Nuvoton NAU7802 Analog to Digital Converter (ADC) + +Required properties: + - compatible: Should be "nuvoton,nau7802" + - reg: Should contain the ADC I2C address + +Optional properties: + - nuvoton,vldo: Internal reference voltage in millivolts to be + configured valid values are between 2400 mV and 4500 mV. + - interrupts: IRQ line for the ADC. If not used the driver will use + polling. + +Example: +adc2: nau7802@2a { + compatible = "nuvoton,nau7802"; + reg = <0x2a>; + nuvoton,vldo = <3000>; +}; diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt new file mode 100644 index 0000000000000000000000000000000000000000..d6f66c73ddbf74a54b2952e13856f29226dece11 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt @@ -0,0 +1,22 @@ +* Avago APDS9300 ambient light sensor + +http://www.avagotech.com/docs/AV02-1077EN + +Required properties: + + - compatible : should be "avago,apds9300" + - reg : the I2C address of the sensor + +Optional properties: + + - interrupt-parent : should be the phandle for the interrupt controller + - interrupts : interrupt mapping for GPIO IRQ + +Example: + +apds9300@39 { + compatible = "avago,apds9300"; + reg = <0x39>; + interrupt-parent = <&gpio2>; + interrupts = <29 8>; +}; diff --git a/Documentation/devicetree/bindings/input/input-reset.txt b/Documentation/devicetree/bindings/input/input-reset.txt new file mode 100644 index 0000000000000000000000000000000000000000..2bb2626fdb78b4521fc06a08fec7107ec85a71a3 --- /dev/null +++ b/Documentation/devicetree/bindings/input/input-reset.txt @@ -0,0 +1,33 @@ +Input: sysrq reset sequence + +A simple binding to represent a set of keys as described in +include/uapi/linux/input.h. This is to communicate a sequence of keys to the +sysrq driver. Upon holding the keys for a specified amount of time (if +specified) the system is sync'ed and reset. + +Key sequences are global to the system but all the keys in a set must be coming +from the same input device. + +The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define +a set of keys. + +Required property: +sysrq-reset-seq: array of Linux keycodes, one keycode per cell. + +Optional property: +timeout-ms: duration keys must be pressed together in milliseconds before +generating a sysrq. If omitted the system is rebooted immediately when a valid +sequence has been recognized. + +Example: + + chosen { + linux,sysrq-reset-seq { + keyset = <0x03 + 0x04 + 0x0a>; + timeout-ms = <3000>; + }; + }; + +Would represent KEY_2, KEY_3 and KEY_9. diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt index df70318a617f0d36baad2e0a757a33c627bfb1db..49fa14ed155ca282dd63068a0bbe15d739a5cd86 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt @@ -6,7 +6,7 @@ Required properties: - interrupt-parent: the phandle for the interrupt controller - interrupts: touch controller interrupt - wakeup-gpios: the gpio pin to be used for waking up the controller - as well as uased as irq pin + and also used as irq pin Example: diff --git a/Documentation/devicetree/bindings/media/i2c/adv7343.txt b/Documentation/devicetree/bindings/media/i2c/adv7343.txt new file mode 100644 index 0000000000000000000000000000000000000000..5653bc2428b897ebcfa84fca31df15146a096966 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adv7343.txt @@ -0,0 +1,48 @@ +* Analog Devices adv7343 video encoder + +The ADV7343 are high speed, digital-to-analog video encoders in a 64-lead LQFP +package. Six high speed, 3.3 V, 11-bit video DACs provide support for composite +(CVBS), S-Video (Y-C), and component (YPrPb/RGB) analog outputs in standard +definition (SD), enhanced definition (ED), or high definition (HD) video +formats. + +Required Properties : +- compatible: Must be "adi,adv7343" + +Optional Properties : +- adi,power-mode-sleep-mode: on enable the current consumption is reduced to + micro ampere level. All DACs and the internal PLL + circuit are disabled. +- adi,power-mode-pll-ctrl: PLL and oversampling control. This control allows + internal PLL 1 circuit to be powered down and the + oversampling to be switched off. +- ad,adv7343-power-mode-dac: array configuring the power on/off DAC's 1..6, + 0 = OFF and 1 = ON, Default value when this + property is not specified is <0 0 0 0 0 0>. +- ad,adv7343-sd-config-dac-out: array configure SD DAC Output's 1 and 2, 0 = OFF + and 1 = ON, Default value when this property is + not specified is <0 0>. + +Example: + +i2c0@1c22000 { + ... + ... + + adv7343@2a { + compatible = "adi,adv7343"; + reg = <0x2a>; + + port { + adv7343_1: endpoint { + adi,power-mode-sleep-mode; + adi,power-mode-pll-ctrl; + /* Use DAC1..3, DAC6 */ + adi,dac-enable = <1 1 1 0 0 1>; + /* Use SD DAC output 1 */ + adi,sd-dac-enable = <1 0>; + }; + }; + }; + ... +}; diff --git a/Documentation/devicetree/bindings/media/i2c/ths8200.txt b/Documentation/devicetree/bindings/media/i2c/ths8200.txt new file mode 100644 index 0000000000000000000000000000000000000000..285f6ae7dfa93b79748cdfcd87fa1525d3ea0ea6 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ths8200.txt @@ -0,0 +1,19 @@ +* Texas Instruments THS8200 video encoder + +The ths8200 device is a digital to analog converter used in DVD players, video +recorders, set-top boxes. + +Required Properties : +- compatible : value must be "ti,ths8200" + +Example: + + i2c0@1c22000 { + ... + ... + ths8200@5c { + compatible = "ti,ths8200"; + reg = <0x5c>; + }; + ... + }; diff --git a/Documentation/devicetree/bindings/media/i2c/tvp7002.txt b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt new file mode 100644 index 0000000000000000000000000000000000000000..5f28b5d9abcce5d52c24f1f4398802934e18e292 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt @@ -0,0 +1,53 @@ +* Texas Instruments TV7002 video decoder + +The TVP7002 device supports digitizing of video and graphics signal in RGB and +YPbPr color space. + +Required Properties : +- compatible : Must be "ti,tvp7002" + +Optional Properties: +- hsync-active: HSYNC Polarity configuration for the bus. Default value when + this property is not specified is <0>. + +- vsync-active: VSYNC Polarity configuration for the bus. Default value when + this property is not specified is <0>. + +- pclk-sample: Clock polarity of the bus. Default value when this property is + not specified is <0>. + +- sync-on-green-active: Active state of Sync-on-green signal property of the + endpoint. + 0 = Normal Operation (Active Low, Default) + 1 = Inverted operation + +- field-even-active: Active-high Field ID output polarity control of the bus. + Under normal operation, the field ID output is set to logic 1 for an odd field + (field 1) and set to logic 0 for an even field (field 0). + 0 = Normal Operation (Active Low, Default) + 1 = FID output polarity inverted + +For further reading of port node refer Documentation/devicetree/bindings/media/ +video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + tvp7002@5c { + compatible = "ti,tvp7002"; + reg = <0x5c>; + + port { + tvp7002_1: endpoint { + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + sync-on-green-active = <1>; + field-even-active = <0>; + }; + }; + }; + ... + }; diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt index df37b0230c75c6c7952447da58fca87e501d8b96..f4181680831bfd24a16b11b2e9b7fdca9b83f2e2 100644 --- a/Documentation/devicetree/bindings/media/s5p-mfc.txt +++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt @@ -10,14 +10,15 @@ Required properties: - compatible : value should be either one among the following (a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs (b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs + (b) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC - reg : Physical base address of the IP registers and length of memory mapped region. - interrupts : MFC interrupt number to the CPU. - - clocks : from common clock binding: handle to mfc clocks. - - clock-names : from common clock binding: must contain "sclk_mfc" and "mfc", - corresponding to entries in the clocks property. + - clocks : from common clock binding: handle to mfc clock. + - clock-names : from common clock binding: must contain "mfc", + corresponding to entry in the clocks property. - samsung,mfc-r : Base address of the first memory bank used by MFC for DMA contiguous memory allocation and its size. @@ -37,8 +38,8 @@ mfc: codec@13400000 { reg = <0x13400000 0x10000>; interrupts = <0 94 0>; samsung,power-domain = <&pd_mfc>; - clocks = <&clock 170>, <&clock 273>; - clock-names = "sclk_mfc", "mfc"; + clocks = <&clock 273>; + clock-names = "mfc"; }; Board specific DT entry: diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index e022d2dc4962a5922331de0d18fa2e1bbb88e4f6..ce719f89dd1ce4ea0f89b17307ec41d61eba2efa 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -88,6 +88,8 @@ Optional endpoint properties - field-even-active: field signal level during the even field data transmission. - pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock signal. +- sync-on-green-active: active state of Sync-on-green (SoG) signal, 0/1 for + LOW/HIGH respectively. - data-lanes: an array of physical data lane indexes. Position of an entry determines the logical lane number, while the value of an entry indicates physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt index e0e59c58a1f92120864af95355655abb2805c34b..5f229c5f6da96c09d011fe5bec75eda2ab2ba56d 100644 --- a/Documentation/devicetree/bindings/mfd/cros-ec.txt +++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt @@ -4,7 +4,7 @@ Google's ChromeOS EC is a Cortex-M device which talks to the AP and implements various function such as keyboard and battery charging. The EC can be connect through various means (I2C, SPI, LPC) and the -compatible string used depends on the inteface. Each connection method has +compatible string used depends on the interface. Each connection method has its own driver which connects to the top level interface-agnostic EC driver. Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to the top-level driver. diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt index 38e51ad2e07e6b5665d6b35850734e5073d62bc0..a45ae08c8ed1d3fef886c34c2c07a501a0719520 100644 --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt @@ -7,9 +7,30 @@ Required properties: - reg: Should contain SSC registers location and length - interrupts: Should contain SSC interrupt -Example: + +Required properties for devices compatible with "atmel,at91sam9g45-ssc": +- dmas: DMA specifier, consisting of a phandle to DMA controller node, + the memory interface and SSC DMA channel ID (for tx and rx). + See Documentation/devicetree/bindings/dma/atmel-dma.txt for details. +- dma-names: Must be "tx", "rx". + +Examples: +- PDC transfer: ssc0: ssc@fffbc000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; interrupts = <14 4 5>; }; + +- DMA transfer: +ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + dmas = <&dma0 1 13>, + <&dma0 1 14>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/misc/smc.txt b/Documentation/devicetree/bindings/misc/smc.txt index 02b4281361771a8151735a76e88eb04fc7765c71..6c9f176f35717acf1a2fd3dcd7ca2cee86daeb88 100644 --- a/Documentation/devicetree/bindings/misc/smc.txt +++ b/Documentation/devicetree/bindings/misc/smc.txt @@ -4,11 +4,12 @@ This binding defines the location of the bounce buffer used for non-secure to secure communications. Required properties: -- compatible : "bcm,kona-smc" +- compatible : "brcm,kona-smc" +- DEPRECATED: compatible : "bcm,kona-smc" - reg : Location and size of bounce buffer Example: smc@0x3404c000 { - compatible = "bcm,bcm11351-smc", "bcm,kona-smc"; + compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; reg = <0x3404c000 0x400>; //1 KiB in SRAM }; diff --git a/Documentation/devicetree/bindings/mmc/bcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/kona-sdhci.txt similarity index 67% rename from Documentation/devicetree/bindings/mmc/bcm,kona-sdhci.txt rename to Documentation/devicetree/bindings/mmc/kona-sdhci.txt index 094ae010f2fbb53163d85d9b8b73a713d8c98438..789fb07a426da61020b5caac68fd8ede83e712ec 100644 --- a/Documentation/devicetree/bindings/mmc/bcm,kona-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/kona-sdhci.txt @@ -4,12 +4,13 @@ This file documents differences between the core properties in mmc.txt and the properties present in the bcm281xx SDHCI Required properties: -- compatible : Should be "bcm,kona-sdhci" +- compatible : Should be "brcm,kona-sdhci" +- DEPRECATED: compatible : Should be "bcm,kona-sdhci" Example: sdio2: sdio@0x3f1a0000 { - compatible = "bcm,kona-sdhci"; + compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x10000>; interrupts = <0x0 74 0x4>; }; diff --git a/Documentation/devicetree/bindings/net/can/atmel-can.txt b/Documentation/devicetree/bindings/net/can/atmel-can.txt index 72cf0c5daff43323b1ca43995a2c6817e972dbe2..14e52a0d86ec2c96df5da66bea9ea148fe91fdd3 100644 --- a/Documentation/devicetree/bindings/net/can/atmel-can.txt +++ b/Documentation/devicetree/bindings/net/can/atmel-can.txt @@ -8,7 +8,7 @@ Required properties: Example: can0: can@f000c000 { - compatbile = "atmel,at91sam9x5-can"; + compatible = "atmel,at91sam9x5-can"; reg = <0xf000c000 0x300>; interrupts = <40 4 5> }; diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index e2371f5cdebe594aa29138b3684e828bd2def7df..eabcb4b5db6e6711b244ea9a35e7b4ff711c12ef 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -18,6 +18,7 @@ Required properties: - interrupt-map-mask and interrupt-map: standard PCI properties to define the mapping of the PCIe interface to interrupt numbers. +- num-lanes: number of lanes to use - reset-gpio: gpio pin number of power good signal Example: @@ -41,6 +42,7 @@ SoC specific DT Entry: #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 53>; + num-lanes = <4>; }; pcie@2a0000 { @@ -60,6 +62,7 @@ SoC specific DT Entry: #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 56>; + num-lanes = <4>; }; Board specific DT Entry: diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt index f8d405897a9486c5c5efdd24a21756da02389988..9556e2fedf6deb77a1b49579521b7744f7318d1e 100644 --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -1,6 +1,7 @@ * Marvell EBU PCIe interfaces Mandatory properties: + - compatible: one of the following values: marvell,armada-370-pcie marvell,armada-xp-pcie @@ -10,11 +11,49 @@ Mandatory properties: - #interrupt-cells, set to <1> - bus-range: PCI bus numbers covered - device_type, set to "pci" -- ranges: ranges for the PCI memory and I/O regions, as well as the - MMIO registers to control the PCIe interfaces. +- ranges: ranges describing the MMIO registers to control the PCIe + interfaces, and ranges describing the MBus windows needed to access + the memory and I/O regions of each PCIe interface. + +The ranges describing the MMIO registers have the following layout: + + 0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s + +where: + + * r is a 32-bits value that gives the offset of the MMIO + registers of this PCIe interface, from the base of the internal + registers. + + * s is a 32-bits value that give the size of this MMIO + registers area. This range entry translates the '0x82000000 0 r' PCI + address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part + of the internal register window (as identified by MBUS_ID(0xf0, + 0x01)). + +The ranges describing the MBus windows have the following layout: + + 0x8t000000 s 0 MBUS_ID(w, a) 0 1 0 + +where: + + * t is the type of the MBus window (as defined by the standard PCI DT + bindings), 1 for I/O and 2 for memory. -In addition, the Device Tree node must have sub-nodes describing each + * s is the PCI slot that corresponds to this PCIe interface + + * w is the 'target ID' value for the MBus window + + * a the 'attribute' value for the MBus window. + +Since the location and size of the different MBus windows is not fixed in +hardware, and only determined in runtime, those ranges cover the full first +4 GB of the physical address space, and do not translate into a valid CPU +address. + +In addition, the device tree node must have sub-nodes describing each PCIe interface, having the following mandatory properties: + - reg: used only for interrupt mapping, so only the first four bytes are used to refer to the correct bus number and device number. - assigned-addresses: reference to the MMIO registers used to control @@ -26,7 +65,8 @@ PCIe interface, having the following mandatory properties: - #address-cells, set to <3> - #size-cells, set to <2> - #interrupt-cells, set to <1> -- ranges, empty property. +- ranges, translating the MBus windows ranges of the parent node into + standard PCI addresses. - interrupt-map-mask and interrupt-map, standard PCI properties to define the mapping of the PCIe interface to interrupt numbers. @@ -47,27 +87,50 @@ pcie-controller { bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */ - 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */ - 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ + + 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ + 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; pcie@1,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 58>; marvell,pcie-port = <0>; @@ -78,12 +141,13 @@ pcie-controller { pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 59>; marvell,pcie-port = <0>; @@ -94,12 +158,13 @@ pcie-controller { pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 60>; marvell,pcie-port = <0>; @@ -110,12 +175,13 @@ pcie-controller { pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 61>; marvell,pcie-port = <0>; @@ -126,12 +192,13 @@ pcie-controller { pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 62>; marvell,pcie-port = <1>; @@ -142,12 +209,13 @@ pcie-controller { pcie@6,0 { device_type = "pci"; - assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 63>; marvell,pcie-port = <1>; @@ -158,12 +226,13 @@ pcie-controller { pcie@7,0 { device_type = "pci"; - assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; reg = <0x3800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 64>; marvell,pcie-port = <1>; @@ -174,12 +243,13 @@ pcie-controller { pcie@8,0 { device_type = "pci"; - assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; reg = <0x4000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 65>; marvell,pcie-port = <1>; @@ -187,14 +257,16 @@ pcie-controller { clocks = <&gateclk 12>; status = "disabled"; }; + pcie@9,0 { device_type = "pci"; - assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; reg = <0x4800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 99>; marvell,pcie-port = <2>; @@ -205,12 +277,13 @@ pcie-controller { pcie@10,0 { device_type = "pci"; - assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>; + assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; reg = <0x5000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 + 0x81000000 0 0 0x81000000 0xa 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 103>; marvell,pcie-port = <3>; diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt new file mode 100644 index 0000000000000000000000000000000000000000..6b7510775c50da125ff55c491613afaa0f216e16 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -0,0 +1,163 @@ +NVIDIA Tegra PCIe controller + +Required properties: +- compatible: "nvidia,tegra20-pcie" or "nvidia,tegra30-pcie" +- device_type: Must be "pci" +- reg: A list of physical base address and length for each set of controller + registers. Must contain an entry for each entry in the reg-names property. +- reg-names: Must include the following entries: + "pads": PADS registers + "afi": AFI registers + "cs": configuration space region +- interrupts: A list of interrupt outputs of the controller. Must contain an + entry for each entry in the interrupt-names property. +- interrupt-names: Must include the following entries: + "intr": The Tegra interrupt that is asserted for controller interrupts + "msi": The Tegra interrupt that is asserted when an MSI is received +- pex-clk-supply: Supply voltage for internal reference clock +- vdd-supply: Power supply for controller (1.05V) +- avdd-supply: Power supply for controller (1.05V) (not required for Tegra20) +- bus-range: Range of bus numbers associated with this controller +- #address-cells: Address representation for root ports (must be 3) + - cell 0 specifies the bus and device numbers of the root port: + [23:16]: bus number + [15:11]: device number + - cell 1 denotes the upper 32 address bits and should be 0 + - cell 2 contains the lower 32 address bits and is used to translate to the + CPU address space +- #size-cells: Size representation for root ports (must be 2) +- ranges: Describes the translation of addresses for root ports and standard + PCI regions. The entries must be 6 cells each, where the first three cells + correspond to the address as described for the #address-cells property + above, the fourth cell is the physical CPU address to translate to and the + fifth and six cells are as described for the #size-cells property above. + - The first two entries are expected to translate the addresses for the root + port registers, which are referenced by the assigned-addresses property of + the root port nodes (see below). + - The remaining entries setup the mapping for the standard I/O, memory and + prefetchable PCI regions. The first cell determines the type of region + that is setup: + - 0x81000000: I/O memory region + - 0x82000000: non-prefetchable memory region + - 0xc2000000: prefetchable memory region + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- clocks: List of clock inputs of the controller. Must contain an entry for + each entry in the clock-names property. +- clock-names: Must include the following entries: + "pex": The Tegra clock of that name + "afi": The Tegra clock of that name + "pcie_xclk": The Tegra clock of that name + "pll_e": The Tegra clock of that name + "cml": The Tegra clock of that name (not required for Tegra20) + +Root ports are defined as subnodes of the PCIe controller node. + +Required properties: +- device_type: Must be "pci" +- assigned-addresses: Address and size of the port configuration registers +- reg: PCI bus address of the root port +- #address-cells: Must be 3 +- #size-cells: Must be 2 +- ranges: Sub-ranges distributed from the PCIe controller node. An empty + property is sufficient. +- nvidia,num-lanes: Number of lanes to use for this port. Valid combinations + are: + - Root port 0 uses 4 lanes, root port 1 is unused. + - Both root ports use 2 lanes. + +Example: + +SoC DTSI: + + pcie-controller { + compatible = "nvidia,tegra20-pcie"; + device_type = "pci"; + reg = <0x80003000 0x00000800 /* PADS registers */ + 0x80003800 0x00000200 /* AFI registers */ + 0x90000000 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <0 98 0x04 /* controller interrupt */ + 0 99 0x04>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */ + 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */ + 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0xa0000000 0xa0000000 0 0x10000000 /* non-prefetchable memory */ + 0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */ + + clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>, + <&tegra_car 118>; + clock-names = "pex", "afi", "pcie_xclk", "pll_e"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + + ranges; + + nvidia,num-lanes = <2>; + }; + }; + + +Board DTS: + + pcie-controller { + status = "okay"; + + vdd-supply = <&pci_vdd_reg>; + pex-clk-supply = <&pci_clk_reg>; + + /* root port 00:01.0 */ + pci@1,0 { + status = "okay"; + + /* bridge 01:00.0 (optional) */ + pci@0,0 { + reg = <0x010000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + + /* endpoint 02:00.0 */ + pci@0,0 { + reg = <0x020000 0 0 0 0>; + }; + }; + }; + }; + +Note that devices on the PCI bus are dynamically discovered using PCI's bus +enumeration and therefore don't need corresponding device nodes in DT. However +if a device on the PCI bus provides a non-probeable bus such as I2C or SPI, +device nodes need to be added in order to allow the bus' children to be +instantiated at the proper location in the operating system's device tree (as +illustrated by the optional nodes in the example above). diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index 648d60eb9fd8f505be140b6d58a6cb771ed04220..7ccae490ff6dcc6936f7c9e5791435685d3ded30 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -37,7 +37,7 @@ Bank: 3 (A, B and C) 0xffffffff 0x7fff3ccf /* pioB */ 0xffffffff 0x007fffff /* pioC */ -For each peripheral/bank we will descibe in a u32 if a pin can can be +For each peripheral/bank we will descibe in a u32 if a pin can be configured in it by putting 1 to the pin bit (1 << pin) Let's take the pioA on peripheral B diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt index e204d009f16c876694c375e66f97f53fb242ab1e..fb70856c5b510e274d0518411ee19c33c5d854df 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt @@ -80,6 +80,17 @@ Valid values for pin and group names are: dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, gmh, owr, uda. +Valid values for nvidia,functions are: + + blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, + displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2, + extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, + i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi, + pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3, + rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, + spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, + usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 + Example: pinmux: pinmux { diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt index 683fde93c4fb1ab9dac7d9472f1ad808202d7cf4..61e73cde9ae9437303b7b095dc2d14c1d4966f62 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt @@ -103,6 +103,17 @@ Valid values for pin and group names are: drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr, drive_uda. +Valid values for nvidia,functions are: + + ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, dap5, + displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, gmi_int, + hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, mipi_hs, nand, + osc, owr, pcie, plla_out, pllc_out1, pllm_out1, pllp_out2, pllp_out3, + pllp_out4, pwm, pwr_intr, pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, + sdio1, sdio2, sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, + spi3, spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi, + vi, vi_sensor_clk, xio + Example: pinctrl@70000000 { diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt index 6f426ed7009e5e43461770787225b398fe68e67f..0e6354c11e6db985a8fe834fe7afced2f3e2d7bd 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt @@ -91,6 +91,18 @@ Valid values for pin and group names are: gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2, uart3, uda, vi1. +Valid values for nvidia,functions are: + + blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, cpu_pwr_req, crt, + dap, ddr, dev3, displaya, displayb, dtv, extperiph1, extperiph2, + extperiph3, gmi, gmi_alt, hda, hdcp, hdmi, hsi, i2c1, i2c2, i2c3, + i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, invalid, kbc, mio, nand, + nand_alt, owr, pcie, pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2, + rsvd3, rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, spi1, + spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, trace, uarta, + uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, + vi, vi_alt1, vi_alt2, vi_alt3 + Example: pinctrl@70000000 { diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index aeb3c995cc048a3f21704152a64c67c5fb739a50..1958ca9f9e5c7f6eb3023a78c115c60f52e16c38 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -127,21 +127,20 @@ whether there is any interaction between the child and intermediate parent nodes, is again defined entirely by the binding for the individual pin controller device. -== Using generic pinconfig options == +== Generic pin configuration node content == -Generic pinconfig parameters can be used by defining a separate node containing -the applicable parameters (and optional values), like: +Many data items that are represented in a pin configuration node are common +and generic. Pin control bindings should use the properties defined below +where they are applicable; not all of these properties are relevant or useful +for all hardware or binding structures. Each individual binding document +should state which of these generic properties, if any, are used, and the +structure of the DT nodes that contain these properties. -pcfg_pull_up: pcfg_pull_up { - bias-pull-up; - drive-strength = <20>; -}; - -This node should then be referenced in the appropriate pinctrl node as a phandle -and parsed in the driver using the pinconf_generic_parse_dt_config function. - -Supported configuration parameters are: +Supported generic properties are: +pins - the list of pins that properties in the node + apply to +function - the mux function to select bias-disable - disable any pin bias bias-high-impedance - high impedance mode ("third-state", "floating") bias-bus-hold - latch weakly @@ -160,7 +159,21 @@ low-power-disable - disable low power mode output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level -Arguments for parameters: +Some of the generic properties take arguments. For those that do, the +arguments are described below. + +- pins takes a list of pin names or IDs as a required argument. The specific + binding for the hardware defines: + - Whether the entries are integers or strings, and their meaning. + +- function takes a list of function names/IDs as a required argument. The + specific binding for the hardware defines: + - Whether the entries are integers or strings, and their meaning. + - Whether only a single entry is allowed (which is applied to all entries + in the pins property), or whether there may alternatively be one entry per + entry in the pins property, in which case the list lengths must match, and + for each list index i, the function at list index i is applied to the pin + at list index i. - bias-pull-up, -down and -pin-default take as optional argument on hardware supporting it the pull strength in Ohm. bias-disable will disable the pull. @@ -170,7 +183,5 @@ Arguments for parameters: - input-debounce takes the debounce time in usec as argument or 0 to disable debouncing -All parameters not listed here, do not take an argument. - More in-depth documentation on these parameters can be found in diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt new file mode 100644 index 0000000000000000000000000000000000000000..734d9b04d5337c6c9591e9c41482fd9a5afc50d5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt @@ -0,0 +1,96 @@ +Palmas Pincontrol bindings + +The pins of Palmas device can be set on different option and provides +the configuration for Pull UP/DOWN, open drain etc. + +Required properties: +- compatible: It must be one of following: + - "ti,palmas-pinctrl" for Palma series of the pincontrol. + - "ti,tps65913-pinctrl" for Palma series device TPS65913. + - "ti,tps80036-pinctrl" for Palma series device TPS80036. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Palmas's pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +list of pins. This configuration can include the mux function to select on +those pin(s), and various pin configuration parameters, such as pull-up, +open drain. + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +Optional properties: +- ti,palmas-enable-dvfs1: Enable DVFS1. Configure pins for DVFS1 mode. + Selection primary or secondary function associated to I2C2_SCL_SCE, + I2C2_SDA_SDO pin/pad for DVFS1 interface +- ti,palmas-enable-dvfs2: Enable DVFS2. Configure pins for DVFS2 mode. + Selection primary or secondary function associated to GPADC_START + and SYSEN2 pin/pad for DVFS2 interface + +This binding uses the following generic properties as defined in +pinctrl-bindings.txt: + +Required: pins +Options: function, bias-disable, bias-pull-up, bias-pull-down, + bias-pin-default, drive-open-drain. + +Note that many of these properties are only valid for certain specific pins. +See the Palmas device datasheet for complete details regarding which pins +support which functionality. + +Valid values for pin names are: + gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8, gpio9, + gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, vac, powergood, + nreswarm, pwrdown, gpadc_start, reset_in, nsleep, enable1, enable2, + int. + +Valid value of function names are: + gpio, led, pwm, regen, sysen, clk32kgaudio, id, vbus_det, chrg_det, + vac, vacok, powergood, usb_psel, msecure, pwrhold, int, nreswarm, + simrsto, simrsti, low_vbat, wireless_chrg1, rcm, pwrdown, gpadc_start, + reset_in, nsleep, enable. + +There are 4 special functions: opt0, opt1, opt2 and opt3. If any of these +functions is selected then directly pins register will be written with 0, 1, 2 +or 3 respectively if it is valid for that pins or list of pins. + +Example: + palmas: tps65913 { + .... + pinctrl { + compatible = "ti,tps65913-pinctrl"; + ti,palmas-enable-dvfs1; + pinctrl-names = "default"; + pinctrl-0 = <&palmas_pins_state>; + + palmas_pins_state: pinmux { + gpio0 { + pins = "gpio0"; + function = "id"; + bias-pull-up; + }; + + vac { + pins = "vac"; + function = "vacok"; + bias-pull-down; + }; + + gpio5 { + pins = "gpio5"; + function = "opt0"; + drive-open-drain = <1>; + }; + }; + }; + .... + }; diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 36281e7a2a46189b2f52368da288c90021a4de17..257677de3e6badac3a185f8c897126d777d48b49 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -12,6 +12,7 @@ Required Properties: - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller, - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller, - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller, + - "samsung,s5pv210-pinctrl": for S5PV210-compatible pin-controller, - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller. - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller. - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller. @@ -128,7 +129,7 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller found on Samsung S3C64xx SoCs, - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller - found on Samsung Exynos4210 SoC. + found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs. - interrupt-parent: phandle of the interrupt parent to which the external wakeup interrupts are forwarded to. - interrupts: interrupt used by multiplexed wakeup interrupts. diff --git a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt index 9a2f3f420526938232848c56d5decfed34c9ca33..6b33b9f18e88347d5f2d2cd3b8e0d85d5ea13b12 100644 --- a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt +++ b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt @@ -1,8 +1,8 @@ ST Ericsson Nomadik pinmux controller Required properties: -- compatible: "stericsson,nmk-pinctrl", "stericsson,nmk-pinctrl-db8540", - "stericsson,nmk-pinctrl-stn8815" +- compatible: "stericsson,db8500-pinctrl", "stericsson,db8540-pinctrl", + "stericsson,stn8815-pinctrl" - reg: Should contain the register physical address and length of the PRCMU. Please refer to pinctrl-bindings.txt in this directory for details of the @@ -68,7 +68,7 @@ Optional subnode-properties: Example board file extract: pinctrl@80157000 { - compatible = "stericsson,nmk-pinctrl"; + compatible = "stericsson,db8500-pinctrl"; reg = <0x80157000 0x2000>; pinctrl-names = "default"; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt index 5693877ab377d6007cdb9e7f4ae7705faec581d7..82dd5b65cf485b43e02775b4329d073dfcf7ebd6 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt @@ -1,21 +1,20 @@ * Freescale MSI interrupt controller Required properties: -- compatible : compatible list, contains 2 entries, - first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, - etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on - the parent type. +- compatible : compatible list, may contain one or two entries + The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, + etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or + "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic + version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is + provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3" + should be used. The first entry is optional; the second entry is + required. - reg : It may contain one or two regions. The first region should contain the address and the length of the shared message interrupt register set. - The second region should contain the address of aliased MSIIR register for - platforms that have such an alias. - -- msi-available-ranges: use style section to define which - msi interrupt can be used in the 256 msi interrupts. This property is - optional, without this, all the 256 MSI interrupts can be used. - Each available range must begin and end on a multiple of 32 (i.e. - no splitting an individual MSI register or the associated PIC interrupt). + The second region should contain the address of aliased MSIIR or MSIIR1 + register for platforms that have such an alias, if using MSIIR1, the second + region must be added because different MSI group has different MSIIR1 offset. - interrupts : each one of the interrupts here is one entry per 32 MSIs, and routed to the host interrupt controller. the interrupts should @@ -28,6 +27,14 @@ Required properties: to MPIC. Optional properties: +- msi-available-ranges: use style section to define which + msi interrupt can be used in the 256 msi interrupts. This property is + optional, without this, all the MSI interrupts can be used. + Each available range must begin and end on a multiple of 32 (i.e. + no splitting an individual MSI register or the associated PIC interrupt). + MPIC v4.3 does not support this property because the 32 interrupts of an + individual register are not continuous when using MSIIR1. + - msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register is used for MSI messaging. The address of MSIIR in PCI address space is the MSI message address. @@ -54,6 +61,28 @@ Example: interrupt-parent = <&mpic>; }; + msi@41600 { + compatible = "fsl,mpic-msi-v4.3"; + reg = <0x41600 0x200 0x44148 4>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0 + 0x100 0 0 0 + 0x101 0 0 0 + 0x102 0 0 0 + 0x103 0 0 0 + 0x104 0 0 0 + 0x105 0 0 0 + 0x106 0 0 0 + 0x107 0 0 0>; + }; + The Freescale hypervisor and msi-address-64 ------------------------------------------- Normally, PCI devices have access to all of CCSR via an ATMU mapping. The diff --git a/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt index de0eaed866514536d8bb3e88c98a33061fd4fb2f..8031148bcf85ad7a8f516d6b985d0c0493c8ae27 100644 --- a/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt @@ -2,11 +2,9 @@ Atmel TCB PWM controller Required properties: - compatible: should be "atmel,tcb-pwm" -- #pwm-cells: Should be 3. The first cell specifies the per-chip index - of the PWM to use, the second cell is the period in nanoseconds and - bit 0 in the third cell is used to encode the polarity of PWM output. - Set bit 0 of the third cell in PWM specifier to 1 for inverse polarity & - set to 0 for normal polarity. +- #pwm-cells: should be 3. See pwm.txt in this directory for a description of + the cells format. The only third cell flag supported by this binding is + PWM_POLARITY_INVERTED. - tc-block: The Timer Counter block to use as a PWM chip. Example: diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt index 8522bfbccfd79f3bdd40306d2cf9650ce08edc6b..b50d7a6d9d7f88ca00524533981c44726e860d3f 100644 --- a/Documentation/devicetree/bindings/pwm/imx-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.txt @@ -3,8 +3,8 @@ Freescale i.MX PWM controller Required properties: - compatible: should be "fsl,-pwm" - reg: physical base address and length of the controller's registers -- #pwm-cells: should be 2. The first cell specifies the per-chip index - of the PWM to use and the second cell is the period in nanoseconds. +- #pwm-cells: should be 2. See pwm.txt in this directory for a description of + the cells format. - interrupts: The interrupt for the pwm controller Example: diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt index 9e3f8f1d46a26642577177806d5f94f2db2b91a1..96cdde5f6208eb1817a7cba95fdba96b5dc3beaa 100644 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt @@ -3,8 +3,8 @@ Freescale MXS PWM controller Required properties: - compatible: should be "fsl,imx23-pwm" - reg: physical base address and length of the controller's registers -- #pwm-cells: should be 2. The first cell specifies the per-chip index - of the PWM to use and the second cell is the period in nanoseconds. +- #pwm-cells: should be 2. See pwm.txt in this directory for a description of + the cells format. - fsl,pwm-number: the number of PWM devices Example: diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt index 01438ecd6628b80920dba8c783483dc94320373b..c3fc57af877260e5f25ca1290e1ca333895d9bdd 100644 --- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt @@ -5,9 +5,8 @@ Required properties: - "nvidia,tegra20-pwm" - "nvidia,tegra30-pwm" - reg: physical base address and length of the controller's registers -- #pwm-cells: On Tegra the number of cells used to specify a PWM is 2. The - first cell specifies the per-chip index of the PWM to use and the second - cell is the period in nanoseconds. +- #pwm-cells: should be 2. See pwm.txt in this directory for a description of + the cells format. Example: diff --git a/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt b/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt index 1e3dfe7a4894c7ac44752b9edb5a15befdad21ba..f84ec9d291ea885d8d30045c3093876fa4b0e455 100644 --- a/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt @@ -3,8 +3,8 @@ NXP PCA9685 16-channel 12-bit PWM LED controller Required properties: - compatible: "nxp,pca9685-pwm" - - #pwm-cells: should be 2. The first cell specifies the per-chip index - of the PWM to use and the second cell is the period in nanoseconds. + - #pwm-cells: Should be 2. See pwm.txt in this directory for a description of + the cells format. The index 16 is the ALLCALL channel, that sets all PWM channels at the same time. diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt index ac67c687a3274e3cdffa7219484f24b73761e705..4caa1a78863e088415ca6af4ebd756f354ab3455 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt @@ -19,13 +19,9 @@ Required properties: - reg: base address and size of register area - interrupts: list of timer interrupts (one interrupt per timer, starting at timer 0) -- #pwm-cells: number of cells used for PWM specifier - must be 3 - the specifier format is as follows: - - phandle to PWM controller node - - index of PWM channel (from 0 to 4) - - PWM signal period in nanoseconds - - bitmask of optional PWM flags: - 0x1 - invert PWM signal +- #pwm-cells: should be 3. See pwm.txt in this directory for a description of + the cells format. The only third cell flag supported by this binding is + PWM_POLARITY_INVERTED. Optional properties: - samsung,pwm-outputs: list of PWM channels used as PWM outputs on particular diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt index 681afad737785a8b1e8d4a47f33e13d28a04704a..fb81179dce3781a0da0d11295ff80e79d0b96ad3 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt @@ -4,11 +4,9 @@ Required properties: - compatible: Must be "ti,-ecap". for am33xx - compatible = "ti,am33xx-ecap"; for da850 - compatible = "ti,da850-ecap", "ti,am33xx-ecap"; -- #pwm-cells: Should be 3. Number of cells being used to specify PWM property. - First cell specifies the per-chip index of the PWM to use, the second - cell is the period in nanoseconds and bit 0 in the third cell is used to - encode the polarity of PWM output. Set bit 0 of the third in PWM specifier - to 1 for inverse polarity & set to 0 for normal polarity. +- #pwm-cells: should be 3. See pwm.txt in this directory for a description of + the cells format. The PWM channel index ranges from 0 to 4. The only third + cell flag supported by this binding is PWM_POLARITY_INVERTED. - reg: physical base address and size of the registers map. Optional properties: diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt index 337c6fc65d3f8f0afbc8d79236bb49c4b58dc029..9c100b2c5b23c4731cc886b363330b6c1c588f36 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt @@ -4,11 +4,9 @@ Required properties: - compatible: Must be "ti,-ehrpwm". for am33xx - compatible = "ti,am33xx-ehrpwm"; for da850 - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; -- #pwm-cells: Should be 3. Number of cells being used to specify PWM property. - First cell specifies the per-chip index of the PWM to use, the second - cell is the period in nanoseconds and bit 0 in the third cell is used to - encode the polarity of PWM output. Set bit 0 of the third in PWM specifier - to 1 for inverse polarity & set to 0 for normal polarity. +- #pwm-cells: should be 3. See pwm.txt in this directory for a description of + the cells format. The only third cell flag supported by this binding is + PWM_POLARITY_INVERTED. - reg: physical base address and size of the registers map. Optional properties: diff --git a/Documentation/devicetree/bindings/pwm/pwm.txt b/Documentation/devicetree/bindings/pwm/pwm.txt index 06e67247859aa7eef3bc253d11cf6f18ca810680..8556263b85026af7943d957659b74bc1ae2c0d23 100644 --- a/Documentation/devicetree/bindings/pwm/pwm.txt +++ b/Documentation/devicetree/bindings/pwm/pwm.txt @@ -43,13 +43,14 @@ because the name "backlight" would be used as fallback anyway. pwm-specifier typically encodes the chip-relative PWM number and the PWM period in nanoseconds. -Optionally, the pwm-specifier can encode a number of flags in a third cell: -- bit 0: PWM signal polarity (0: normal polarity, 1: inverse polarity) +Optionally, the pwm-specifier can encode a number of flags (defined in +) in a third cell: +- PWM_POLARITY_INVERTED: invert the PWM signal polarity Example with optional PWM specifier for inverse polarity bl: backlight { - pwms = <&pwm 0 5000000 1>; + pwms = <&pwm 0 5000000 PWM_POLARITY_INVERTED>; pwm-names = "backlight"; }; diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt new file mode 100644 index 0000000000000000000000000000000000000000..b067e84a94b5e92d0ecd9c0857bd2af793d51ebf --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt @@ -0,0 +1,28 @@ +* Renesas R-Car Timer Pulse Unit PWM Controller + +Required Properties: + + - compatible: should be one of the following. + - "renesas,tpu-r8a73a4": for R8A77A4 (R-Mobile APE6) compatible PWM controller. + - "renesas,tpu-r8a7740": for R8A7740 (R-Mobile A1) compatible PWM controller. + - "renesas,tpu-r8a7790": for R8A7790 (R-Car H2) compatible PWM controller. + - "renesas,tpu-sh7372": for SH7372 (SH-Mobile AP4) compatible PWM controller. + - "renesas,tpu": for generic R-Car TPU PWM controller. + + - reg: Base address and length of each memory resource used by the PWM + controller hardware module. + + - #pwm-cells: should be 3. See pwm.txt in this directory for a description of + the cells format. The only third cell flag supported by this binding is + PWM_POLARITY_INVERTED. + +Please refer to pwm.txt in this directory for details of the common PWM bindings +used by client devices. + +Example: R8A7740 (R-Car A1) TPU controller node + + tpu: pwm@e6600000 { + compatible = "renesas,tpu-r8a7740", "renesas,tpu"; + reg = <0xe6600000 0x100>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/spear-pwm.txt b/Documentation/devicetree/bindings/pwm/spear-pwm.txt index 3ac779d833869561f09a81218382f2def0623bf8..b486de2c3fe31b92c128e1bef22a4c4f9eff6e66 100644 --- a/Documentation/devicetree/bindings/pwm/spear-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/spear-pwm.txt @@ -5,9 +5,8 @@ Required properties: - "st,spear320-pwm" - "st,spear1340-pwm" - reg: physical base address and length of the controller's registers -- #pwm-cells: number of cells used to specify PWM which is fixed to 2 on - SPEAr. The first cell specifies the per-chip index of the PWM to use and - the second cell is the period in nanoseconds. +- #pwm-cells: should be 2. See pwm.txt in this directory for a description of + the cells format. Example: diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt index 2943ee5fce00e71b4b1f83b740bc040021333f01..4e32bee11201b6a968ef89f3dc547df45c0fc47b 100644 --- a/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt @@ -6,8 +6,8 @@ On TWL6030 series: PWM0 and PWM1 Required properties: - compatible: "ti,twl4030-pwm" or "ti,twl6030-pwm" -- #pwm-cells: should be 2. The first cell specifies the per-chip index - of the PWM to use and the second cell is the period in nanoseconds. +- #pwm-cells: should be 2. See pwm.txt in this directory for a description of + the cells format. Example: diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt index cb64f3acc10f4b0e124503b6d47ff3e2851503b7..9f4b460907827909f012ec4e36ddbbaf44cc1369 100644 --- a/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt +++ b/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt @@ -6,8 +6,8 @@ On TWL6030 series: LED PWM (mainly used as charging indicator LED) Required properties: - compatible: "ti,twl4030-pwmled" or "ti,twl6030-pwmled" -- #pwm-cells: should be 2. The first cell specifies the per-chip index - of the PWM to use and the second cell is the period in nanoseconds. +- #pwm-cells: should be 2. See pwm.txt in this directory for a description of + the cells format. Example: diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt index d21d82d29855cded82dfc6caf00482745c2a26c3..a76390e6df2efb63bafbd6376b56557eb89958c9 100644 --- a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt @@ -3,11 +3,9 @@ VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller Required properties: - compatible: should be "via,vt8500-pwm" - reg: physical base address and length of the controller's registers -- #pwm-cells: Should be 3. Number of cells being used to specify PWM property. - First cell specifies the per-chip index of the PWM to use, the second - cell is the period in nanoseconds and bit 0 in the third cell is used to - encode the polarity of PWM output. Set bit 0 of the third in PWM specifier - to 1 for inverse polarity & set to 0 for normal polarity. +- #pwm-cells: should be 3. See pwm.txt in this directory for a description of + the cells format. The only third cell flag supported by this binding is + PWM_POLARITY_INVERTED. - clocks: phandle to the PWM source clock Example: diff --git a/Documentation/devicetree/bindings/regulator/88pm800.txt b/Documentation/devicetree/bindings/regulator/88pm800.txt new file mode 100644 index 0000000000000000000000000000000000000000..e8a54c2a582159d8940a81860095944701b19aa3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/88pm800.txt @@ -0,0 +1,38 @@ +Marvell 88PM800 regulator + +Required properties: +- compatible: "marvell,88pm800" +- reg: I2C slave address +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. + +The valid names for regulators are: + + buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, + ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19 + +Example: + + pmic: 88pm800@31 { + compatible = "marvell,88pm800"; + reg = <0x31>; + + regulators { + buck1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + ldo1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <15000000>; + regulator-boot-on; + regulator-always-on; + }; +... + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max8660.txt b/Documentation/devicetree/bindings/regulator/max8660.txt new file mode 100644 index 0000000000000000000000000000000000000000..8ba994d8a142c7e23b824edafd5f0be45d424a18 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8660.txt @@ -0,0 +1,47 @@ +Maxim MAX8660 voltage regulator + +Required properties: +- compatible: must be one of "maxim,max8660", "maxim,max8661" +- reg: I2C slave address, usually 0x34 +- any required generic properties defined in regulator.txt + +Example: + + i2c_master { + max8660@34 { + compatible = "maxim,max8660"; + reg = <0x34>; + + regulators { + regulator@0 { + regulator-compatible= "V3(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@1 { + regulator-compatible= "V4(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@2 { + regulator-compatible= "V5(LDO)"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + }; + + regulator@3 { + regulator-compatible= "V6(LDO)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@4 { + regulator-compatible= "V7(LDO)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt index 30b0581bb1ce63cbea673888e9fec22a5df72aa5..a22e4c70db5cea846b3ee477822f6d73cb837668 100644 --- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -25,8 +25,8 @@ Optional nodes: Additional custom properties are listed below. For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP, - smps45, smps457, smps7 depending on variant, smps6, smps[8-10], - ldo[1-9], ldoln, ldousb. + smps45, smps457, smps7 depending on variant, smps6, smps[8-9], + smps10_out2, smps10_out1, do[1-9], ldoln, ldousb. Optional sub-node properties: ti,warm-reset - maintain voltage during warm reset(boolean) diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt new file mode 100644 index 0000000000000000000000000000000000000000..fc989b2e8057b3ced0b306ac53befb4a3edc1f81 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt @@ -0,0 +1,115 @@ +PFUZE100 family of regulators + +Required properties: +- compatible: "fsl,pfuze100" +- reg: I2C slave address + +Required child node: +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. Please refer to below doc + Documentation/devicetree/bindings/regulator/regulator.txt. + + The valid names for regulators are: + sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6 + +Each regulator is defined using the standard binding for regulators. + +Example: + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 48a3b8e5d6bde80fce883c7db83f99dc4bcc7da7..2bd8f09787659269bb03847b3517cff2b52cfca9 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -12,6 +12,8 @@ Optional properties: - regulator-allow-bypass: allow the regulator to go into bypass mode - -supply: phandle to the parent supply/regulator node - regulator-ramp-delay: ramp delay for regulator(in uV/uS) + For hardwares which support disabling ramp rate, it should be explicitly + intialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple diff --git a/Documentation/devicetree/bindings/rtc/dw-apb.txt b/Documentation/devicetree/bindings/rtc/dw-apb.txt index eb2327b2bdb3143ba126089536402d113719a6c8..c703d51abb6c08f96a80a897b104f21e0d649893 100644 --- a/Documentation/devicetree/bindings/rtc/dw-apb.txt +++ b/Documentation/devicetree/bindings/rtc/dw-apb.txt @@ -1,7 +1,10 @@ * Designware APB timer Required properties: -- compatible: "snps,dw-apb-timer-sp" or "snps,dw-apb-timer-osc" +- compatible: One of: + "snps,dw-apb-timer" + "snps,dw-apb-timer-sp" + "snps,dw-apb-timer-osc" - reg: physical base address of the controller and length of memory mapped region. - interrupts: IRQ line for the timer. @@ -20,25 +23,10 @@ systems may use one. Example: - - timer1: timer@ffc09000 { - compatible = "snps,dw-apb-timer-sp"; - interrupts = <0 168 4>; - clock-frequency = <200000000>; - reg = <0xffc09000 0x1000>; - }; - - timer2: timer@ffd00000 { - compatible = "snps,dw-apb-timer-osc"; - interrupts = <0 169 4>; - clock-frequency = <200000000>; - reg = <0xffd00000 0x1000>; - }; - - timer3: timer@ffe00000 { - compatible = "snps,dw-apb-timer-osc"; - interrupts = <0 170 4>; - reg = <0xffe00000 0x1000>; - clocks = <&timer_clk>, <&timer_pclk>; - clock-names = "timer", "pclk"; - }; + timer@ffe00000 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 170 4>; + reg = <0xffe00000 0x1000>; + clocks = <&timer_clk>, <&timer_pclk>; + clock-names = "timer", "pclk"; + }; diff --git a/Documentation/devicetree/bindings/serial/altera_jtaguart.txt b/Documentation/devicetree/bindings/serial/altera_jtaguart.txt index c152f65f9a280b9971b9e4a70b393c511737e0a8..55a901051e8fb5c3e64ba359593606cb9fa9a23a 100644 --- a/Documentation/devicetree/bindings/serial/altera_jtaguart.txt +++ b/Documentation/devicetree/bindings/serial/altera_jtaguart.txt @@ -1,4 +1,5 @@ Altera JTAG UART Required properties: -- compatible : should be "ALTR,juart-1.0" +- compatible : should be "ALTR,juart-1.0" +- compatible : should be "altr,juart-1.0" diff --git a/Documentation/devicetree/bindings/serial/altera_uart.txt b/Documentation/devicetree/bindings/serial/altera_uart.txt index 71cae3f701000760522d48c82035b5d8a6fbfe2e..81bf7ffb1a810a3c337896b46b3ee4f23146b211 100644 --- a/Documentation/devicetree/bindings/serial/altera_uart.txt +++ b/Documentation/devicetree/bindings/serial/altera_uart.txt @@ -1,7 +1,8 @@ Altera UART Required properties: -- compatible : should be "ALTR,uart-1.0" +- compatible : should be "ALTR,uart-1.0" +- compatible : should be "altr,uart-1.0" Optional properties: - clock-frequency : frequency of the clock input to the UART diff --git a/Documentation/devicetree/bindings/tty/serial/arc-uart.txt b/Documentation/devicetree/bindings/serial/arc-uart.txt similarity index 100% rename from Documentation/devicetree/bindings/tty/serial/arc-uart.txt rename to Documentation/devicetree/bindings/serial/arc-uart.txt diff --git a/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt similarity index 58% rename from Documentation/devicetree/bindings/tty/serial/atmel-usart.txt rename to Documentation/devicetree/bindings/serial/atmel-usart.txt index a49d9a1d4ccf8f054cc1faed657f32095d85a1c3..2191dcb9f1da986d008a87688ea0af693ea3bf28 100644 --- a/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -10,13 +10,18 @@ Required properties: Optional properties: - atmel,use-dma-rx: use of PDC or DMA for receiving data - atmel,use-dma-tx: use of PDC or DMA for transmitting data +- add dma bindings for dma transfer: + - dmas: DMA specifier, consisting of a phandle to DMA controller node, + memory peripheral interface and USART DMA channel ID, FIFO configuration. + Refer to dma.txt and atmel-dma.txt for details. + - dma-names: "rx" for RX channel, "tx" for TX channel. compatible description: - at91rm9200: legacy USART support - at91sam9260: generic USART implementation for SAM9 SoCs Example: - +- use PDC: usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x4000>; @@ -25,3 +30,14 @@ Example: atmel,use-dma-tx; }; +- use DMA: + usart0: serial@f001c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf001c000 0x100>; + interrupts = <12 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + dmas = <&dma0 2 0x3>, + <&dma0 2 0x204>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/tty/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt similarity index 100% rename from Documentation/devicetree/bindings/tty/serial/efm32-uart.txt rename to Documentation/devicetree/bindings/serial/efm32-uart.txt diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index c58573b5b1a466f43e3a71a788a65f545c5728ae..35ae1fb3537f3217a50fe92fd8f4042b52e6e6d0 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -1,35 +1,29 @@ -* Freescale i.MX UART controller +* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART) Required properties: -- compatible : should be "fsl,imx21-uart" +- compatible : Should be "fsl,-uart" - reg : Address and length of the register set for the device -- interrupts : Should contain UART interrupt number +- interrupts : Should contain uart interrupt Optional properties: -- fsl,uart-has-rtscts: indicate that RTS/CTS signals are used +- fsl,uart-has-rtscts : Indicate the uart has rts and cts +- fsl,irda-mode : Indicate the uart supports irda mode +- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works + is DCE mode by default. Note: Each uart controller should have an alias correctly numbered in "aliases" node. Example: -- From imx51.dtsi: aliases { serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; }; uart1: serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; - status = "disabled"; -} - -- From imx51-babbage.dts: -uart1: serial@73fbc000 { fsl,uart-has-rtscts; - status = "okay"; + fsl,dte-mode; }; - diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt similarity index 100% rename from Documentation/devicetree/bindings/tty/serial/fsl-lpuart.txt rename to Documentation/devicetree/bindings/serial/fsl-lpuart.txt diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt similarity index 86% rename from Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt rename to Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt index 2c00ec64628e26c6c87591b238d979509d7e3f66..59a40f18d5510439452cf81c8f2102dd71334ba8 100644 --- a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt @@ -10,6 +10,10 @@ Required properties: Refer to dma.txt and fsl-mxs-dma.txt for details. - dma-names: "rx" for RX channel, "tx" for TX channel. +Optional properties: +- fsl,uart-has-rtscts : Indicate the UART has RTS and CTS lines, + it also means you enable the DMA support for this UART. + Example: auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; diff --git a/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt new file mode 100644 index 0000000000000000000000000000000000000000..669b8140dd796db70aa738a451e15d2199a335a3 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt @@ -0,0 +1,65 @@ +Device tree bindings for Marvell PXA SSP ports + +Required properties: + + - compatible: Must be one of + mrvl,pxa25x-ssp + mvrl,pxa25x-nssp + mrvl,pxa27x-ssp + mrvl,pxa3xx-ssp + mvrl,pxa168-ssp + mrvl,pxa910-ssp + mrvl,ce4100-ssp + mrvl,lpss-ssp + + - reg: The memory base + - dmas: Two dma phandles, one for rx, one for tx + - dma-names: Must be "rx", "tx" + + +Example for PXA3xx: + + ssp0: ssp@41000000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41000000 0x40>; + ssp-id = <1>; + interrupts = <24>; + clock-names = "pxa27x-ssp.0"; + dmas = <&dma 13 + &dma 14>; + dma-names = "rx", "tx"; + }; + + ssp1: ssp@41700000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41700000 0x40>; + ssp-id = <2>; + interrupts = <16>; + clock-names = "pxa27x-ssp.1"; + dmas = <&dma 15 + &dma 16>; + dma-names = "rx", "tx"; + }; + + ssp2: ssp@41900000 { + compatibl3 = "mrvl,pxa3xx-ssp"; + reg = <0x41900000 0x40>; + ssp-id = <3>; + interrupts = <0>; + clock-names = "pxa27x-ssp.2"; + dmas = <&dma 66 + &dma 67>; + dma-names = "rx", "tx"; + }; + + ssp3: ssp@41a00000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41a00000 0x40>; + ssp-id = <4>; + interrupts = <13>; + clock-names = "pxa27x-ssp.3"; + dmas = <&dma 2 + &dma 3>; + dma-names = "rx", "tx"; + }; + diff --git a/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt b/Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt similarity index 100% rename from Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt rename to Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/of-serial.txt similarity index 100% rename from Documentation/devicetree/bindings/tty/serial/of-serial.txt rename to Documentation/devicetree/bindings/serial/of-serial.txt diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uart.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uart.txt new file mode 100644 index 0000000000000000000000000000000000000000..ce8c9016195922682f433bfcb3742279de6aa132 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uart.txt @@ -0,0 +1,25 @@ +* MSM Serial UART + +The MSM serial UART hardware is designed for low-speed use cases where a +dma-engine isn't needed. From a software perspective it's mostly compatible +with the MSM serial UARTDM except that it only supports reading and writing one +character at a time. + +Required properties: +- compatible: Should contain "qcom,msm-uart" +- reg: Should contain UART register location and length. +- interrupts: Should contain UART interrupt. +- clocks: Should contain the core clock. +- clock-names: Should be "core". + +Example: + +A uart device at 0xa9c00000 with interrupt 11. + +serial@a9c00000 { + compatible = "qcom,msm-uart"; + reg = <0xa9c00000 0x1000>; + interrupts = <11>; + clocks = <&uart_cxc>; + clock-names = "core"; +}; diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt new file mode 100644 index 0000000000000000000000000000000000000000..ffa5b784c66e55631735919e1ee7d15cd02d690c --- /dev/null +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt @@ -0,0 +1,53 @@ +* MSM Serial UARTDM + +The MSM serial UARTDM hardware is designed for high-speed use cases where the +transmit and/or receive channels can be offloaded to a dma-engine. From a +software perspective it's mostly compatible with the MSM serial UART except +that it supports reading and writing multiple characters at a time. + +Required properties: +- compatible: Should contain at least "qcom,msm-uartdm". + A more specific property should be specified as follows depending + on the version: + "qcom,msm-uartdm-v1.1" + "qcom,msm-uartdm-v1.2" + "qcom,msm-uartdm-v1.3" + "qcom,msm-uartdm-v1.4" +- reg: Should contain UART register locations and lengths. The first + register shall specify the main control registers. An optional second + register location shall specify the GSBI control region. + "qcom,msm-uartdm-v1.3" is the only compatible value that might + need the GSBI control region. +- interrupts: Should contain UART interrupt. +- clocks: Should contain the core clock and the AHB clock. +- clock-names: Should be "core" for the core clock and "iface" for the + AHB clock. + +Optional properties: +- dmas: Should contain dma specifiers for transmit and receive channels +- dma-names: Should contain "tx" for transmit and "rx" for receive channels + +Examples: + +A uartdm v1.4 device with dma capabilities. + +serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = <0 108 0x0>; + clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>; + clock-names = "core", "iface"; + dmas = <&dma0 0>, <&dma0 1>; + dma-names = "tx", "rx"; +}; + +A uartdm v1.3 device without dma capabilities and part of a GSBI complex. + +serial@19c40000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x19c40000 0x1000>, + <0x19c00000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>; + clock-names = "core", "iface"; +}; diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt index 1e753c69fc83298249434ecd32543da7b0d929de..32b1fa1f2a5b8dec1eca195f1fea93528155728b 100644 --- a/Documentation/devicetree/bindings/serial/rs485.txt +++ b/Documentation/devicetree/bindings/serial/rs485.txt @@ -7,7 +7,7 @@ UART node. Required properties: - rs485-rts-delay: prop-encoded-array where: - * a is the delay beteween rts signal and beginning of data sent in milliseconds. + * a is the delay between rts signal and beginning of data sent in milliseconds. it corresponds to the delay before sending data. * b is the delay between end of data sent and rts signal in milliseconds it corresponds to the delay after sending data and actual release of the line. diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt new file mode 100644 index 0000000000000000000000000000000000000000..a2dfc6522a91cb9aa5c7167f5adfe146e7918db7 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/sirf-uart.txt @@ -0,0 +1,33 @@ +* CSR SiRFprimaII/atlasVI Universal Synchronous Asynchronous Receiver/Transmitter * + +Required properties: +- compatible : Should be "sirf,prima2-uart" or "sirf, prima2-usp-uart" +- reg : Offset and length of the register set for the device +- interrupts : Should contain uart interrupt +- fifosize : Should define hardware rx/tx fifo size +- clocks : Should contain uart clock number + +Optional properties: +- sirf,uart-has-rtscts: we have hardware flow controller pins in hardware +- rts-gpios: RTS pin for USP-based UART if sirf,uart-has-rtscts is true +- cts-gpios: CTS pin for USP-based UART if sirf,uart-has-rtscts is true + +Example: + +uart0: uart@b0050000 { + cell-index = <0>; + compatible = "sirf,prima2-uart"; + reg = <0xb0050000 0x1000>; + interrupts = <17>; + fifosize = <128>; + clocks = <&clks 13>; +}; + +On the board-specific dts, we can put rts-gpios and cts-gpios like + +usp@b0090000 { + compatible = "sirf,prima2-usp-uart"; + sirf,uart-has-rtscts; + rts-gpios = <&gpio 15 0>; + cts-gpios = <&gpio 46 0>; +}; diff --git a/Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt similarity index 100% rename from Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt rename to Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt diff --git a/Documentation/devicetree/bindings/serial/st-asc.txt b/Documentation/devicetree/bindings/serial/st-asc.txt new file mode 100644 index 0000000000000000000000000000000000000000..75d877f5968fd4de74cf0f4a112ac7cb7b70b6ca --- /dev/null +++ b/Documentation/devicetree/bindings/serial/st-asc.txt @@ -0,0 +1,18 @@ +*st-asc(Serial Port) + +Required properties: +- compatible : Should be "st,asc". +- reg, reg-names, interrupts, interrupt-names : Standard way to define device + resources with names. look in + Documentation/devicetree/bindings/resource-names.txt + +Optional properties: +- st,hw-flow-ctrl bool flag to enable hardware flow control. +- st,force-m1 bool flat to force asc to be in Mode-1 recommeded + for high bit rates (above 19.2K) +Example: +serial@fe440000{ + compatible = "st,asc"; + reg = <0xfe440000 0x2c>; + interrupts = <0 209 0>; +}; diff --git a/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt b/Documentation/devicetree/bindings/serial/via,vt8500-uart.txt similarity index 100% rename from Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt rename to Documentation/devicetree/bindings/serial/via,vt8500-uart.txt diff --git a/Documentation/devicetree/bindings/serio/altera_ps2.txt b/Documentation/devicetree/bindings/serio/altera_ps2.txt index 4d9eecc2ef7de9066f24a8c593a735e675184962..520199e2e3477396e792f88d18b4059cb5635568 100644 --- a/Documentation/devicetree/bindings/serio/altera_ps2.txt +++ b/Documentation/devicetree/bindings/serio/altera_ps2.txt @@ -1,4 +1,5 @@ Altera UP PS/2 controller Required properties: -- compatible : should be "ALTR,ps2-1.0". +- compatible : should be "ALTR,ps2-1.0". +- compatible : should be "altr,ps2-1.0". diff --git a/Documentation/devicetree/bindings/sound/ak4554.c b/Documentation/devicetree/bindings/sound/ak4554.c new file mode 100644 index 0000000000000000000000000000000000000000..934fa02754b38878a9b7cd110f63287cade24252 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak4554.c @@ -0,0 +1,11 @@ +AK4554 ADC/DAC + +Required properties: + + - compatible : "asahi-kasei,ak4554" + +Example: + +ak4554-adc-dac { + compatible = "asahi-kasei,ak4554"; +}; diff --git a/Documentation/devicetree/bindings/sound/alc5632.txt b/Documentation/devicetree/bindings/sound/alc5632.txt index 8608f747dcfe1869ae5061007a2fd583000ef545..ffd886d110bdcbc6aa79d2372149ae14867b2449 100644 --- a/Documentation/devicetree/bindings/sound/alc5632.txt +++ b/Documentation/devicetree/bindings/sound/alc5632.txt @@ -13,6 +13,25 @@ Required properties: - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify optional parameters (currently unused). +Pins on the device (for linking into audio routes): + + * SPK_OUTP + * SPK_OUTN + * HP_OUT_L + * HP_OUT_R + * AUX_OUT_P + * AUX_OUT_N + * LINE_IN_L + * LINE_IN_R + * PHONE_P + * PHONE_N + * MIC1_P + * MIC1_N + * MIC2_P + * MIC2_N + * MICBIAS1 + * DMICDAT + Example: alc5632: alc5632@1e { diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt new file mode 100644 index 0000000000000000000000000000000000000000..0720857089a7d0b3464fdc57927b01a27b5394af --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt @@ -0,0 +1,35 @@ +* Atmel at91sam9x5ek wm8731 audio complex + +Required properties: + - compatible: "atmel,sam9x5-wm8731-audio" + - atmel,model: The user-visible name of this sound complex. + - atmel,ssc-controller: The phandle of the SSC controller + - atmel,audio-codec: The phandle of the WM8731 audio codec + - atmel,audio-routing: A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. + +Available audio endpoints for the audio-routing table: + +Board connectors: + * Headphone Jack + * Line In Jack + +wm8731 pins: +cf Documentation/devicetree/bindings/sound/wm8731.txt + +Example: +sound { + compatible = "atmel,sam9x5-wm8731-audio"; + + atmel,model = "wm8731 @ AT91SAM9X5EK"; + + atmel,audio-routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "LLINEIN", "Line In Jack", + "RLINEIN", "Line In Jack"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; +}; diff --git a/Documentation/devicetree/bindings/sound/atmel-wm8904.txt b/Documentation/devicetree/bindings/sound/atmel-wm8904.txt new file mode 100644 index 0000000000000000000000000000000000000000..8bbe50c884b69612a51254a5174ab6dbe178a383 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel-wm8904.txt @@ -0,0 +1,55 @@ +Atmel ASoC driver with wm8904 audio codec complex + +Required properties: + - compatible: "atmel,asoc-wm8904" + - atmel,model: The user-visible name of this sound complex. + - atmel,audio-routing: A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources and + sinks are the WM8904's pins, and the jacks on the board: + + WM8904 pins: + + * IN1L + * IN1R + * IN2L + * IN2R + * IN3L + * IN3R + * HPOUTL + * HPOUTR + * LINEOUTL + * LINEOUTR + * MICBIAS + + Board connectors: + + * Headphone Jack + * Line In Jack + * Mic + + - atmel,ssc-controller: The phandle of the SSC controller + - atmel,audio-codec: The phandle of the WM8904 audio codec + +Optional properties: + - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt + +Example: +sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_mck>; + + atmel,model = "wm8904 @ AT91SAM9N12EK"; + + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; +}; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt new file mode 100644 index 0000000000000000000000000000000000000000..f2ae335670f5ebb34d467f396a0a1b4ac3b3a69c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt @@ -0,0 +1,54 @@ +Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller + +The Freescale S/PDIF audio block is a stereo transceiver that allows the +processor to receive and transmit digital audio via an coaxial cable or +a fibre cable. + +Required properties: + + - compatible : Compatible list, must contain "fsl,imx35-spdif". + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains the spdif interrupt. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + + - dma-names : Two dmas have to be defined, "tx" and "rx". + + - clocks : Contains an entry for each entry in clock-names. + + - clock-names : Includes the following entries: + "core" The core clock of spdif controller + "rxtx<0-7>" Clock source list for tx and rx clock. + This clock list should be identical to + the source list connecting to the spdif + clock mux in "SPDIF Transceiver Clock + Diagram" of SoC reference manual. It + can also be referred to TxClk_Source + bit of register SPDIF_STC. + +Example: + +spdif: spdif@02004000 { + compatible = "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <0 52 0x04>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + + clocks = <&clks 197>, <&clks 3>, + <&clks 197>, <&clks 107>, + <&clks 0>, <&clks 118>, + <&clks 62>, <&clks 139>, + <&clks 0>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7"; + + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt similarity index 87% rename from Documentation/devicetree/bindings/powerpc/fsl/ssi.txt rename to Documentation/devicetree/bindings/sound/fsl,ssi.txt index 5ff76c9c57d27212d88723b85442e431cfa1aed4..4303b6ab6208e0856f81bc2fbc0ab8c4e81f519c 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt +++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt @@ -43,10 +43,22 @@ Required properties: together. This would still allow different sample sizes, but not different sample rates. +Required are also ac97 link bindings if ac97 is used. See +Documentation/devicetree/bindings/sound/soc-ac97link.txt for the necessary +bindings. + Optional properties: - codec-handle: Phandle to a 'codec' node that defines an audio codec connected to this SSI. This node is typically a child of an I2C or other control node. +- fsl,fiq-stream-filter: Bool property. Disabled DMA and use FIQ instead to + filter the codec stream. This is necessary for some boards + where an incompatible codec is connected to this SSI, e.g. + on pca100 and pcm043. +- dmas: Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. +- dma-names: Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq + is not defined. Child 'codec' node required properties: - compatible: Compatible list, contains the name of the codec diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt new file mode 100644 index 0000000000000000000000000000000000000000..7d13479f9c3c989f42a3e3b6df6ae0753b8190d4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt @@ -0,0 +1,34 @@ +Freescale i.MX audio complex with S/PDIF transceiver + +Required properties: + + - compatible : "fsl,imx-audio-spdif" + + - model : The user-visible name of this sound complex + + - spdif-controller : The phandle of the i.MX S/PDIF controller + + +Optional properties: + + - spdif-out : This is a boolean property. If present, the transmitting + function of S/PDIF will be enabled, indicating there's a physical + S/PDIF out connector/jack on the board or it's connecting to some + other IP block, such as an HDMI encoder/display-controller. + + - spdif-in : This is a boolean property. If present, the receiving + function of S/PDIF will be enabled, indicating there's a physical + S/PDIF in connector/jack on the board. + +* Note: At least one of these two properties should be set in the DT binding. + + +Example: + +sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + spdif-in; +}; diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt index 215aa9817213e9ea8e469a94f19fcc251aa87352..f88a00e54c6351cca3972943482d14b620ba3671 100644 --- a/Documentation/devicetree/bindings/sound/imx-audmux.txt +++ b/Documentation/devicetree/bindings/sound/imx-audmux.txt @@ -5,6 +5,15 @@ Required properties: or "fsl,imx31-audmux" for the version firstly used on i.MX31. - reg : Should contain AUDMUX registers location and length +An initial configuration can be setup using child nodes. + +Required properties of optional child nodes: +- fsl,audmux-port : Integer of the audmux port that is configured by this + child node. +- fsl,port-config : List of configuration options for the specific port. For + imx31-audmux and above, it is a list of tuples . For + imx21-audmux it is a list of pcr values. + Example: audmux@021d8000 { diff --git a/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt new file mode 100644 index 0000000000000000000000000000000000000000..74c9ba6c2823d9d1dc0704bc7338f8b3414e2eca --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt @@ -0,0 +1,28 @@ +Marvell PXA SSP CPU DAI bindings + +Required properties: + + compatible Must be "mrvl,pxa-ssp-dai" + port A phandle reference to a PXA ssp upstream device + +Example: + + /* upstream device */ + + ssp0: ssp@41000000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41000000 0x40>; + interrupts = <24>; + clock-names = "pxa27x-ssp.0"; + dmas = <&dma 13 + &dma 14>; + dma-names = "rx", "tx"; + }; + + /* DAI as user */ + + ssp_dai0: ssp_dai@0 { + compatible = "mrvl,pxa-ssp-dai"; + port = <&ssp0>; + }; + diff --git a/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt b/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt new file mode 100644 index 0000000000000000000000000000000000000000..551fbb8348c25ae05002aed81ff5e8a8cf2f1358 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt @@ -0,0 +1,15 @@ +DT bindings for ARM PXA2xx PCM platform driver + +This is just a dummy driver that registers the PXA ASoC platform driver. +It does not have any resources assigned. + +Required properties: + + - compatible 'mrvl,pxa-pcm-audio' + +Example: + + pxa_pcm_audio: snd_soc_pxa_audio { + compatible = "mrvl,pxa-pcm-audio"; + }; + diff --git a/Documentation/devicetree/bindings/sound/mvebu-audio.txt b/Documentation/devicetree/bindings/sound/mvebu-audio.txt new file mode 100644 index 0000000000000000000000000000000000000000..7e5fd37c1b3f4d7fa983b43a31eace9fb88ec238 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mvebu-audio.txt @@ -0,0 +1,29 @@ +* mvebu (Kirkwood, Dove, Armada 370) audio controller + +Required properties: + +- compatible: "marvell,mvebu-audio" + +- reg: physical base address of the controller and length of memory mapped + region. + +- interrupts: list of two irq numbers. + The first irq is used for data flow and the second one is used for errors. + +- clocks: one or two phandles. + The first one is mandatory and defines the internal clock. + The second one is optional and defines an external clock. + +- clock-names: names associated to the clocks: + "internal" for the internal clock + "extclk" for the external clock + +Example: + +i2s1: audio-controller@b4000 { + compatible = "marvell,mvebu-audio"; + reg = <0xb4000 0x2210>; + interrupts = <21>, <22>; + clocks = <&gate_clk 13>; + clock-names = "internal"; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt index 05ffecb571037cb562778cb243a84555384345d1..8b8903ef0800069afdad90f10e5964f3bd2e20c9 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt @@ -11,28 +11,8 @@ Required properties: - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. Valid names for sources and - sinks are the ALC5632's pins: - - ALC5632 pins: - - * SPK_OUTP - * SPK_OUTN - * HP_OUT_L - * HP_OUT_R - * AUX_OUT_P - * AUX_OUT_N - * LINE_IN_L - * LINE_IN_R - * PHONE_P - * PHONE_N - * MIC1_P - * MIC1_N - * MIC2_P - * MIC2_N - * MICBIAS1 - * DMICDAT - - Board connectors: + sinks are the ALC5632's pins as documented in the binding for the device + and: * Headset Stereophone * Int Spk diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt index d130818700b228a200e4c81c35e7406f6e792e3a..dc6224994d69d97f31614a308d71ba6cf2c9784c 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt @@ -11,32 +11,12 @@ Required properties: - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. Valid names for sources and - sinks are the RT5640's pins, and the jacks on the board: - - RT5640 pins: - - * DMIC1 - * DMIC2 - * MICBIAS1 - * IN1P - * IN1R - * IN2P - * IN2R - * HPOL - * HPOR - * LOUTL - * LOUTR - * MONOP - * MONON - * SPOLP - * SPOLN - * SPORP - * SPORN - - Board connectors: + sinks are the RT5640's pins (as documented in its binding), and the jacks + on the board: * Headphones * Speakers + * Mic Jack - nvidia,i2s-controller : The phandle of the Tegra I2S controller that's connected to the CODEC. diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt index d14510613a7fdf1ac076320a04468976aa88811a..aab6ce0ad2fc5930054a1f97c73ea5781aa57e10 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt @@ -11,31 +11,8 @@ Required properties: - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. Valid names for sources and - sinks are the WM8753's pins, and the jacks on the board: - - WM8753 pins: - - * LOUT1 - * LOUT2 - * ROUT1 - * ROUT2 - * MONO1 - * MONO2 - * OUT3 - * OUT4 - * LINE1 - * LINE2 - * RXP - * RXN - * ACIN - * ACOP - * MIC1N - * MIC1 - * MIC2N - * MIC2 - * Mic Bias - - Board connectors: + sinks are the WM8753's pins as documented in the binding for the WM8753, + and the jacks on the board: * Headphone Jack * Mic Jack diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt index 3bf722deb722265422283b4b897c37ffc74d31ae..4b44dfb6ca0dcb08e5ad4468df6aeee853d3d56e 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt @@ -11,28 +11,8 @@ Required properties: - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. Valid names for sources and - sinks are the WM8903's pins, and the jacks on the board: - - WM8903 pins: - - * IN1L - * IN1R - * IN2L - * IN2R - * IN3L - * IN3R - * DMICDAT - * HPOUTL - * HPOUTR - * LINEOUTL - * LINEOUTR - * LOP - * LON - * ROP - * RON - * MICBIAS - - Board connectors: + sinks are the WM8903's pins (documented in the WM8903 binding document), + and the jacks on the board: * Headphone Jack * Int Spk diff --git a/Documentation/devicetree/bindings/sound/pcm1792a.txt b/Documentation/devicetree/bindings/sound/pcm1792a.txt new file mode 100644 index 0000000000000000000000000000000000000000..970ba1ed576f24b9298dcf07754b5450cec2cc45 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/pcm1792a.txt @@ -0,0 +1,18 @@ +Texas Instruments pcm1792a DT bindings + +This driver supports the SPI bus. + +Required properties: + + - compatible: "ti,pcm1792a" + +For required properties on SPI, please consult +Documentation/devicetree/bindings/spi/spi-bus.txt + +Examples: + + codec_spi: 1792a@0 { + compatible = "ti,pcm1792a"; + spi-max-frequency = <600000>; + }; + diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt index 005bcb24d72dc1e5e359aeadf9842eda277d23e1..068a1141b06f19de0f5206e97de40f0af6793812 100644 --- a/Documentation/devicetree/bindings/sound/rt5640.txt +++ b/Documentation/devicetree/bindings/sound/rt5640.txt @@ -18,6 +18,26 @@ Optional properties: - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. +Pins on the device (for linking into audio routes): + + * DMIC1 + * DMIC2 + * MICBIAS1 + * IN1P + * IN1R + * IN2P + * IN2R + * HPOL + * HPOR + * LOUTL + * LOUTR + * MONOP + * MONON + * SPOLP + * SPOLN + * SPORP + * SPORN + Example: rt5640 { diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt index 025e66b85a43905b3cb64b2e5590872d0a000b3e..7386d444ada1b4a7bcb7f29b29a5ef45b70ace48 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt @@ -2,7 +2,15 @@ Required SoC Specific Properties: -- compatible : "samsung,i2s-v5" +- compatible : should be one of the following. + - samsung,s3c6410-i2s: for 8/16/24bit stereo I2S. + - samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with + secondary fifo, s/w reset control and internal mux for root clk src. + - samsung,exynos5420-i2s: for 8/16/24bit multichannel(7.1) I2S with + secondary fifo, s/w reset control, internal mux for root clk src and + TDM support. TDM (Time division multiplexing) is to allow transfer of + multiple channel audio data on single data line. + - reg: physical base address of the controller and length of memory mapped region. - dmas: list of DMA controller phandle and DMA request line ordered pairs. @@ -21,13 +29,6 @@ Required SoC Specific Properties: Optional SoC Specific Properties: -- samsung,supports-6ch: If the I2S Primary sound source has 5.1 Channel - support, this flag is enabled. -- samsung,supports-rstclr: This flag should be set if I2S software reset bit - control is required. When this flag is set I2S software reset bit will be - enabled or disabled based on need. -- samsung,supports-secdai:If I2S block has a secondary FIFO and internal DMA, - then this flag is enabled. - samsung,idma-addr: Internal DMA register base address of the audio sub system(used in secondary sound source). - pinctrl-0: Should specify pin control groups used for this controller. @@ -36,7 +37,7 @@ Optional SoC Specific Properties: Example: i2s0: i2s@03830000 { - compatible = "samsung,i2s-v5"; + compatible = "samsung,s5pv210-i2s"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 &pdma0 9 @@ -46,9 +47,6 @@ i2s0: i2s@03830000 { <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_SCLK_I2S>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - samsung,supports-6ch; - samsung,supports-rstclr; - samsung,supports-secdai; samsung,idma-addr = <0x03000000>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; diff --git a/Documentation/devicetree/bindings/sound/soc-ac97link.txt b/Documentation/devicetree/bindings/sound/soc-ac97link.txt new file mode 100644 index 0000000000000000000000000000000000000000..80152a87f239aa16d2f7d62944324e2a23c8b4de --- /dev/null +++ b/Documentation/devicetree/bindings/sound/soc-ac97link.txt @@ -0,0 +1,28 @@ +AC97 link bindings + +These bindings can be included within any other device node. + +Required properties: + - pinctrl-names: Has to contain following states to setup the correct + pinmuxing for the used gpios: + "ac97-running": AC97-link is active + "ac97-reset": AC97-link reset state + "ac97-warm-reset": AC97-link warm reset state + - ac97-gpios: List of gpio phandles with args in the order ac97-sync, + ac97-sdata, ac97-reset + + +Example: + +ssi { + ... + + pinctrl-names = "default", "ac97-running", "ac97-reset", "ac97-warm-reset"; + pinctrl-0 = <&ac97link_running>; + pinctrl-1 = <&ac97link_running>; + pinctrl-2 = <&ac97link_reset>; + pinctrl-3 = <&ac97link_warm_reset>; + ac97-gpios = <&gpio3 20 0 &gpio3 22 0 &gpio3 28 0>; + + ... +}; diff --git a/Documentation/devicetree/bindings/sound/ti,pcm1681.txt b/Documentation/devicetree/bindings/sound/ti,pcm1681.txt new file mode 100644 index 0000000000000000000000000000000000000000..4df17185ab807c5d2be5843b38cd6c995c74914b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,pcm1681.txt @@ -0,0 +1,15 @@ +Texas Instruments PCM1681 8-channel PWM Processor + +Required properties: + + - compatible: Should contain "ti,pcm1681". + - reg: The i2c address. Should contain <0x4c>. + +Examples: + + i2c_bus { + pcm1681@4c { + compatible = "ti,pcm1681"; + reg = <0x4c>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt index f47c3f589fd03a8deb2485292116e33d17a0f7da..705a6b156c6c4fc00713443f5fa631996b259401 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -3,7 +3,14 @@ Texas Instruments - tlv320aic3x Codec module The tlv320aic3x serial control bus communicates through I2C protocols Required properties: -- compatible - "string" - "ti,tlv320aic3x" + +- compatible - "string" - One of: + "ti,tlv320aic3x" - Generic TLV320AIC3x device + "ti,tlv320aic33" - TLV320AIC33 + "ti,tlv320aic3007" - TLV320AIC3007 + "ti,tlv320aic3106" - TLV320AIC3106 + + - reg - - I2C slave address diff --git a/Documentation/devicetree/bindings/sound/wm8731.txt b/Documentation/devicetree/bindings/sound/wm8731.txt index 15f70048469bdde098a857c6f2566d94ce320d2a..236690e99b87fbc81c0cb5b1823981cf1e87ff4d 100644 --- a/Documentation/devicetree/bindings/sound/wm8731.txt +++ b/Documentation/devicetree/bindings/sound/wm8731.txt @@ -16,3 +16,12 @@ codec: wm8731@1a { compatible = "wlf,wm8731"; reg = <0x1a>; }; + +Available audio endpoints for an audio-routing table: + * LOUT: Left Channel Line Output + * ROUT: Right Channel Line Output + * LHPOUT: Left Channel Headphone Output + * RHPOUT: Right Channel Headphone Output + * LLINEIN: Left Channel Line Input + * RLINEIN: Right Channel Line Input + * MICIN: Microphone Input diff --git a/Documentation/devicetree/bindings/sound/wm8753.txt b/Documentation/devicetree/bindings/sound/wm8753.txt index e65277a0fb60dee8b720ef3246cb2ae581f640c7..8eee6128210552e0d8decfedeffbc0b216a9ec21 100644 --- a/Documentation/devicetree/bindings/sound/wm8753.txt +++ b/Documentation/devicetree/bindings/sound/wm8753.txt @@ -10,9 +10,31 @@ Required properties: - reg : the I2C address of the device for I2C, the chip select number for SPI. +Pins on the device (for linking into audio routes): + + * LOUT1 + * LOUT2 + * ROUT1 + * ROUT2 + * MONO1 + * MONO2 + * OUT3 + * OUT4 + * LINE1 + * LINE2 + * RXP + * RXN + * ACIN + * ACOP + * MIC1N + * MIC1 + * MIC2N + * MIC2 + * Mic Bias + Example: -codec: wm8737@1a { +codec: wm8753@1a { compatible = "wlf,wm8753"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/wm8903.txt b/Documentation/devicetree/bindings/sound/wm8903.txt index f102cbc426943370dad18b96f311827a86e39dad..94ec32c194bb1fc8f3dd4b6bbe10069008e4d673 100644 --- a/Documentation/devicetree/bindings/sound/wm8903.txt +++ b/Documentation/devicetree/bindings/sound/wm8903.txt @@ -28,6 +28,25 @@ Optional properties: performed. If any entry has the value 0xffffffff, that GPIO's configuration will not be modified. +Pins on the device (for linking into audio routes): + + * IN1L + * IN1R + * IN2L + * IN2R + * IN3L + * IN3R + * DMICDAT + * HPOUTL + * HPOUTR + * LINEOUTL + * LINEOUTR + * LOP + * LON + * ROP + * RON + * MICBIAS + Example: codec: wm8903@1a { diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt index f2f3e80934d227f123e4ecef3f8562c1530ed70a..e045e90a0924bc6e4d8a1861cd1a43b1a7a8d178 100644 --- a/Documentation/devicetree/bindings/sound/wm8994.txt +++ b/Documentation/devicetree/bindings/sound/wm8994.txt @@ -32,6 +32,10 @@ Optional properties: The second cell is the flags, encoded as the trigger masks from Documentation/devicetree/bindings/interrupts.txt + - clocks : A list of up to two phandle and clock specifier pairs + - clock-names : A list of clock names sorted in the same order as clocks. + Valid clock names are "MCLK1" and "MCLK2". + - wlf,gpio-cfg : A list of GPIO configuration register values. If absent, no configuration of these registers is performed. If any value is over 0xffff then the register will be left as default. If present 11 diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt new file mode 100644 index 0000000000000000000000000000000000000000..a590ca51be75ead37bcf1b16fba6047625a945b7 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt @@ -0,0 +1,34 @@ +* Energy Micro EFM32 SPI + +Required properties: +- #address-cells: see spi-bus.txt +- #size-cells: see spi-bus.txt +- compatible: should be "efm32,spi" +- reg: Offset and length of the register set for the controller +- interrupts: pair specifying rx and tx irq +- clocks: phandle to the spi clock +- cs-gpios: see spi-bus.txt +- location: Value to write to the ROUTE register's LOCATION bitfield to configure the pinmux for the device, see datasheet for values. + +Example: + +spi1: spi@0x4000c400 { /* USART1 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "efm32,spi"; + reg = <0x4000c400 0x400>; + interrupts = <15 16>; + clocks = <&cmu 20>; + cs-gpios = <&gpio 51 1>; // D3 + location = <1>; + status = "ok"; + + ks8851@0 { + compatible = "ks8851"; + spi-max-frequency = <6000000>; + reg = <0>; + interrupt-parent = <&boardfpga>; + interrupts = <4>; + status = "ok"; + }; +}; diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt index 296015e3c632af7d7f6dbc85e862bfd20044a296..800dafe5b01b1b6cc0e6c8f4fcd6d9432c9d699f 100644 --- a/Documentation/devicetree/bindings/spi/spi-bus.txt +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt @@ -55,6 +55,16 @@ contain the following properties. chip select active high - spi-3wire - (optional) Empty property indicating device requires 3-wire mode. +- spi-tx-bus-width - (optional) The bus width(number of data wires) that + used for MOSI. Defaults to 1 if not present. +- spi-rx-bus-width - (optional) The bus width(number of data wires) that + used for MISO. Defaults to 1 if not present. + +Some SPI controllers and devices support Dual and Quad SPI transfer mode. +It allows data in SPI system transfered in 2 wires(DUAL) or 4 wires(QUAD). +Now the value that spi-tx-bus-width and spi-rx-bus-width can receive is +only 1(SINGLE), 2(DUAL) and 4(QUAD). +Dual/Quad mode is not allowed when 3-wire mode is used. If a gpio chipselect is used for the SPI slave the gpio number will be passed via the cs_gpio diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt new file mode 100644 index 0000000000000000000000000000000000000000..a1fb3035a42bebf683e25bf4012a539fe8092a50 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -0,0 +1,42 @@ +ARM Freescale DSPI controller + +Required properties: +- compatible : "fsl,vf610-dspi" +- reg : Offset and length of the register set for the device +- interrupts : Should contain SPI controller interrupt +- clocks: from common clock binding: handle to dspi clock. +- clock-names: from common clock binding: Shall be "dspi". +- pinctrl-0: pin control group to be used for this controller. +- pinctrl-names: must contain a "default" entry. +- spi-num-chipselects : the number of the chipselect signals. +- bus-num : the slave chip chipselect signal number. +Example: + +dspi0@4002c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-dspi"; + reg = <0x4002c000 0x1000>; + interrupts = <0 67 0x04>; + clocks = <&clks VF610_CLK_DSPI0>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi0_1>; + status = "okay"; + + sflash: at26df081a@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at26df081a"; + spi-max-frequency = <16000000>; + spi-cpol; + spi-cpha; + reg = <0>; + linux,modalias = "m25p80"; + modal = "at26df081a"; + }; +}; + + diff --git a/Documentation/devicetree/bindings/spi/spi_altera.txt b/Documentation/devicetree/bindings/spi/spi_altera.txt index dda375943506152bd665e35f24080073365aad35..31319dcf30ab78513f7355d1b28d1f439c052cab 100644 --- a/Documentation/devicetree/bindings/spi/spi_altera.txt +++ b/Documentation/devicetree/bindings/spi/spi_altera.txt @@ -1,4 +1,5 @@ Altera SPI Required properties: -- compatible : should be "ALTR,spi-1.0". +- compatible : should be "ALTR,spi-1.0". +- compatible : should be "altr,spi-1.0". diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt new file mode 100644 index 0000000000000000000000000000000000000000..1f9641ade0b51dc3fbcfc3dd9d0c161e94df5891 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt @@ -0,0 +1,22 @@ +TI QSPI controller. + +Required properties: +- compatible : should be "ti,dra7xxx-qspi" or "ti,am4372-qspi". +- reg: Should contain QSPI registers location and length. +- #address-cells, #size-cells : Must be present if the device has sub-nodes +- ti,hwmods: Name of the hwmod associated to the QSPI + +Recommended properties: +- spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: + +qspi: qspi@4b300000 { + compatible = "ti,dra7xxx-qspi"; + reg = <0x4b300000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <25000000>; + ti,hwmods = "qspi"; +}; diff --git a/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt b/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt new file mode 100644 index 0000000000000000000000000000000000000000..da2d510cae47d4515420feba97822095b6920ee4 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt @@ -0,0 +1,17 @@ +MOXA ART timer + +Required properties: + +- compatible : Must be "moxa,moxart-timer" +- reg : Should contain registers location and length +- interrupts : Should contain the timer interrupt number +- clocks : Should contain phandle for the clock that drives the counter + +Example: + + timer: timer@98400000 { + compatible = "moxa,moxart-timer"; + reg = <0x98400000 0x42>; + interrupts = <19 1>; + clocks = <&coreclk>; + }; diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt deleted file mode 100644 index c662eb36be2926e60d97c1cfd8489d0da839ba89..0000000000000000000000000000000000000000 --- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART) - -Required properties: -- compatible : Should be "fsl,-uart" -- reg : Address and length of the register set for the device -- interrupts : Should contain uart interrupt - -Optional properties: -- fsl,uart-has-rtscts : Indicate the uart has rts and cts -- fsl,irda-mode : Indicate the uart supports irda mode -- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works - is DCE mode by default. - -Example: - -serial@73fbc000 { - compatible = "fsl,imx51-uart", "fsl,imx21-uart"; - reg = <0x73fbc000 0x4000>; - interrupts = <31>; - fsl,uart-has-rtscts; - fsl,dte-mode; -}; diff --git a/Documentation/devicetree/bindings/tty/serial/msm_serial.txt b/Documentation/devicetree/bindings/tty/serial/msm_serial.txt deleted file mode 100644 index aef383eb8876a470879547a31422fffc2b53859b..0000000000000000000000000000000000000000 --- a/Documentation/devicetree/bindings/tty/serial/msm_serial.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Qualcomm MSM UART - -Required properties: -- compatible : - - "qcom,msm-uart", and one of "qcom,msm-hsuart" or - "qcom,msm-lsuart". -- reg : offset and length of the register set for the device - for the hsuart operating in compatible mode, there should be a - second pair describing the gsbi registers. -- interrupts : should contain the uart interrupt. - -There are two different UART blocks used in MSM devices, -"qcom,msm-hsuart" and "qcom,msm-lsuart". The msm-serial driver is -able to handle both of these, and matches against the "qcom,msm-uart" -as the compatibility. - -The registers for the "qcom,msm-hsuart" device need to specify both -register blocks, even for the common driver. - -Example: - - uart@19c400000 { - compatible = "qcom,msm-hsuart", "qcom,msm-uart"; - reg = <0x19c40000 0x1000>, - <0x19c00000 0x1000>; - interrupts = <195>; - }; diff --git a/Documentation/devicetree/bindings/tty/serial/qca,ar9330-uart.txt b/Documentation/devicetree/bindings/tty/serial/qca,ar9330-uart.txt new file mode 100644 index 0000000000000000000000000000000000000000..c5e032c85bf9d018edcf01afa0a20ba651cc72d0 --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/qca,ar9330-uart.txt @@ -0,0 +1,34 @@ +* Qualcomm Atheros AR9330 High-Speed UART + +Required properties: + +- compatible: Must be "qca,ar9330-uart" + +- reg: Specifies the physical base address of the controller and + the length of the memory mapped region. + +- interrupt-parent: The phandle for the interrupt controller that + services interrupts for this device. + +- interrupts: Specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends on the + parent interrupt controller. + +Additional requirements: + + Each UART port must have an alias correctly numbered in "aliases" + node. + +Example: + + aliases { + serial0 = &uart0; + }; + + uart0: uart@18020000 { + compatible = "qca,ar9330-uart"; + reg = <0x18020000 0x14>; + + interrupt-parent = <&intc>; + interrupts = <3>; + }; diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index dc9dc8c87f15a2e649bd8289d3fbc50c2caf73a1..20c2ff2ba07ebd3f8e7d4e2b438b69373cacfbba 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -1,35 +1,197 @@ -AM33XX MUSB GLUE - - compatible : Should be "ti,musb-am33xx" - - reg : offset and length of register sets, first usbss, then for musb instances - - interrupts : usbss, musb instance interrupts in order - - ti,hwmods : must be "usb_otg_hs" - - multipoint : Should be "1" indicating the musb controller supports - multipoint. This is a MUSB configuration-specific setting. - - num-eps : Specifies the number of endpoints. This is also a - MUSB configuration-specific setting. Should be set to "16" - - ram-bits : Specifies the ram address size. Should be set to "12" - - port0-mode : Should be "3" to represent OTG. "1" signifies HOST and "2" - represents PERIPHERAL. - - port1-mode : Should be "1" to represent HOST. "3" signifies OTG and "2" - represents PERIPHERAL. - - power : Should be "250". This signifies the controller can supply up to - 500mA when operating in host mode. + AM33xx MUSB +~~~~~~~~~~~~~~~ +- compatible: ti,am33xx-usb +- reg: offset and length of the usbss register sets +- ti,hwmods : must be "usb_otg_hs" + +The glue layer contains multiple child nodes. It is required the have +at least a control module node, USB node and a PHY node. The second USB +node and its PHY node is optional. The DMA node is also optional. + +Reset module +~~~~~~~~~~~~ +- compatible: ti,am335x-usb-ctrl-module +- reg: offset and length of the "USB control registers" in the "Control + Module" block. A second offset and length for the USB wake up control + in the same memory block. +- reg-names: "phy_ctrl" for the "USB control registers" and "wakeup" for + the USB wake up control register. + +USB PHY +~~~~~~~ +compatible: ti,am335x-usb-phy +reg: offset and length of the "USB PHY" register space +ti,ctrl_mod: reference to the "reset module" node +reg-names: phy +The PHY should have a "phy" alias numbered properly in the alias +node. + +USB +~~~ +- compatible: ti,musb-am33xx +- reg: offset and length of "USB Controller Registers", and offset and + length of "USB Core" register space. +- reg-names: control for the ""USB Controller Registers" and "mc" for + "USB Core" register space +- interrupts: USB interrupt number +- interrupt-names: mc +- dr_mode: Should be one of "host", "peripheral" or "otg". +- mentor,multipoint: Should be "1" indicating the musb controller supports + multipoint. This is a MUSB configuration-specific setting. +- mentor,num-eps: Specifies the number of endpoints. This is also a + MUSB configuration-specific setting. Should be set to "16" +- mentor,ram-bits: Specifies the ram address size. Should be set to "12" +- mentor,power: Should be "500". This signifies the controller can supply up to + 500mA when operating in host mode. +- phys: reference to the USB phy +- dmas: specifies the dma channels +- dma-names: specifies the names of the channels. Use "rxN" for receive + and "txN" for transmit endpoints. N specifies the endpoint number. + +The controller should have an "usb" alias numbered properly in the alias +node. + +DMA +~~~ +- compatible: ti,am3359-cppi41 +- reg: offset and length of the following register spaces: USBSS, USB + CPPI DMA Controller, USB CPPI DMA Scheduler, USB Queue Manager +- reg-names: glue, controller, scheduler, queuemgr +- #dma-cells: should be set to 2. The first number represents the + endpoint number (0 … 14 for endpoints 1 … 15 on instance 0 and 15 … 29 + for endpoints 1 … 15 on instance 1). The second number is 0 for RX and + 1 for TX transfers. +- #dma-channels: should be set to 30 representing the 15 endpoints for + each USB instance. Example: +~~~~~~~~ +The following example contains all the nodes as used on am335x-evm: + +aliases { + usb0 = &usb0; + usb1 = &usb1; + phy0 = &usb0_phy; + phy1 = &usb1_phy; +}; -usb@47400000 { - compatible = "ti,musb-am33xx"; - reg = <0x47400000 0x1000 /* usbss */ - 0x47401000 0x800 /* musb instance 0 */ - 0x47401800 0x800>; /* musb instance 1 */ - interrupts = <17 /* usbss */ - 18 /* musb instance 0 */ - 19>; /* musb instance 1 */ - multipoint = <1>; - num-eps = <16>; - ram-bits = <12>; - port0-mode = <3>; - port1-mode = <3>; - power = <250>; +usb: usb@47400000 { + compatible = "ti,am33xx-usb"; + reg = <0x47400000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; ti,hwmods = "usb_otg_hs"; + + ctrl_mod: control@44e10000 { + compatible = "ti,am335x-usb-ctrl-module"; + reg = <0x44e10620 0x10 + 0x44e10648 0x4>; + reg-names = "phy_ctrl", "wakeup"; + }; + + usb0_phy: usb-phy@47401300 { + compatible = "ti,am335x-usb-phy"; + reg = <0x47401300 0x100>; + reg-names = "phy"; + ti,ctrl_mod = <&ctrl_mod>; + }; + + usb0: usb@47401000 { + compatible = "ti,musb-am33xx"; + reg = <0x47401400 0x400 + 0x47401000 0x200>; + reg-names = "mc", "control"; + + interrupts = <18>; + interrupt-names = "mc"; + dr_mode = "otg" + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + phys = <&usb0_phy>; + + dmas = <&cppi41dma 0 0 &cppi41dma 1 0 + &cppi41dma 2 0 &cppi41dma 3 0 + &cppi41dma 4 0 &cppi41dma 5 0 + &cppi41dma 6 0 &cppi41dma 7 0 + &cppi41dma 8 0 &cppi41dma 9 0 + &cppi41dma 10 0 &cppi41dma 11 0 + &cppi41dma 12 0 &cppi41dma 13 0 + &cppi41dma 14 0 &cppi41dma 0 1 + &cppi41dma 1 1 &cppi41dma 2 1 + &cppi41dma 3 1 &cppi41dma 4 1 + &cppi41dma 5 1 &cppi41dma 6 1 + &cppi41dma 7 1 &cppi41dma 8 1 + &cppi41dma 9 1 &cppi41dma 10 1 + &cppi41dma 11 1 &cppi41dma 12 1 + &cppi41dma 13 1 &cppi41dma 14 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; + }; + + usb1_phy: usb-phy@47401b00 { + compatible = "ti,am335x-usb-phy"; + reg = <0x47401b00 0x100>; + reg-names = "phy"; + ti,ctrl_mod = <&ctrl_mod>; + }; + + usb1: usb@47401800 { + compatible = "ti,musb-am33xx"; + reg = <0x47401c00 0x400 + 0x47401800 0x200>; + reg-names = "mc", "control"; + interrupts = <19>; + interrupt-names = "mc"; + dr_mode = "host" + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + phys = <&usb1_phy>; + + dmas = <&cppi41dma 15 0 &cppi41dma 16 0 + &cppi41dma 17 0 &cppi41dma 18 0 + &cppi41dma 19 0 &cppi41dma 20 0 + &cppi41dma 21 0 &cppi41dma 22 0 + &cppi41dma 23 0 &cppi41dma 24 0 + &cppi41dma 25 0 &cppi41dma 26 0 + &cppi41dma 27 0 &cppi41dma 28 0 + &cppi41dma 29 0 &cppi41dma 15 1 + &cppi41dma 16 1 &cppi41dma 17 1 + &cppi41dma 18 1 &cppi41dma 19 1 + &cppi41dma 20 1 &cppi41dma 21 1 + &cppi41dma 22 1 &cppi41dma 23 1 + &cppi41dma 24 1 &cppi41dma 25 1 + &cppi41dma 26 1 &cppi41dma 27 1 + &cppi41dma 28 1 &cppi41dma 29 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; + }; + + cppi41dma: dma-controller@07402000 { + compatible = "ti,am3359-cppi41"; + reg = <0x47400000 0x1000 + 0x47402000 0x1000 + 0x47403000 0x1000 + 0x47404000 0x4000>; + reg-names = "glue", "controller", "scheduler", "queuemgr"; + interrupts = <17>; + interrupt-names = "glue"; + #dma-cells = <2>; + #dma-channels = <30>; + #dma-requests = <256>; + }; }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 7a95c651ceb3b20f82bd0940aed222cc1e3be5c6..e807635f9e1c72acec52de0f296804b14e5d458c 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -3,10 +3,12 @@ synopsys DWC3 CORE DWC3- USB3 CONTROLLER Required properties: - - compatible: must be "synopsys,dwc3" + - compatible: must be "snps,dwc3" - reg : Address and length of the register set for the device - interrupts: Interrupts used by the dwc3 controller. - - usb-phy : array of phandle for the PHY device + - usb-phy : array of phandle for the PHY device. The first element + in the array is expected to be a handle to the USB2/HS PHY and + the second element is expected to be a handle to the USB3/SS PHY Optional properties: - tx-fifo-resize: determines if the FIFO *has* to be reallocated. @@ -14,7 +16,7 @@ Optional properties: This is usually a subnode to DWC3 glue to which it is connected. dwc3@4a030000 { - compatible = "synopsys,dwc3"; + compatible = "snps,dwc3"; reg = <0x4a030000 0xcfff>; interrupts = <0 92 4> usb-phy = <&usb2_phy>, <&usb3,phy>; diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt new file mode 100644 index 0000000000000000000000000000000000000000..477d5bb5e51cf9089e900650279373fe89e37812 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/generic.txt @@ -0,0 +1,24 @@ +Generic USB Properties + +Optional properties: + - maximum-speed: tells USB controllers we want to work up to a certain + speed. Valid arguments are "super-speed", "high-speed", + "full-speed" and "low-speed". In case this isn't passed + via DT, USB controllers should default to their maximum + HW capability. + - dr_mode: tells Dual-Role USB controllers that we want to work on a + particular mode. Valid arguments are "host", + "peripheral" and "otg". In case this attribute isn't + passed via DT, USB DRD controllers should default to + OTG. + +This is an attribute to a USB controller such as: + +dwc3@4a030000 { + compatible = "synopsys,dwc3"; + reg = <0x4a030000 0xcfff>; + interrupts = <0 92 4> + usb-phy = <&usb2_phy>, <&usb3,phy>; + maximum-speed = "super-speed"; + dr_mode = "otg"; +}; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt index c4c9e9e664aac3461a378d2ab249ba0ca662b2b2..ba797d3e6326bc53a927cfa655c8cbad76db854e 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt @@ -3,7 +3,7 @@ Tegra SOC USB PHY The device node for Tegra SOC USB PHY: Required properties : - - compatible : Should be "nvidia,tegra20-usb-phy". + - compatible : Should be "nvidia,tegra-usb-phy". - reg : Defines the following set of registers, in the order listed: - The PHY's own register set. Always present. @@ -24,17 +24,26 @@ Required properties : Required properties for phy_type == ulpi: - nvidia,phy-reset-gpio : The GPIO used to reset the PHY. -Required PHY timing params for utmi phy: +Required PHY timing params for utmi phy, for all chips: - nvidia,hssync-start-delay : Number of 480 Mhz clock cycles to wait before start of sync launches RxActive - nvidia,elastic-limit : Variable FIFO Depth of elastic input store - nvidia,idle-wait-delay : Number of 480 Mhz clock cycles of idle to wait before declare IDLE. - nvidia,term-range-adj : Range adjusment on terminations - - nvidia,xcvr-setup : HS driver output control + - Either one of the following for HS driver output control: + - nvidia,xcvr-setup : integer, uses the provided value. + - nvidia,xcvr-setup-use-fuses : boolean, indicates that the value is read + from the on-chip fuses + If both are provided, nvidia,xcvr-setup-use-fuses takes precedence. - nvidia,xcvr-lsfslew : LS falling slew rate control. - nvidia,xcvr-lsrslew : LS rising slew rate control. +Required PHY timing params for utmi phy, only on Tegra30 and above: + - nvidia,xcvr-hsslew : HS slew rate control. + - nvidia,hssquelch-level : HS squelch detector level. + - nvidia,hsdiscon-level : HS disconnect detector level. + Optional properties: - nvidia,has-legacy-mode : boolean indicates whether this controller can operate in legacy mode (as APX 2500 / 2600). In legacy mode some @@ -48,5 +57,5 @@ Optional properties: peripheral means it is device controller otg means it can operate as either ("on the go") -Required properties for dr_mode == otg: +VBUS control (required for dr_mode == otg, optional for dr_mode == host): - vbus-supply: regulator for VBUS diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 57e71f6817d04b15a2311eda669fd9945ccd6b98..9088ab09e20028c99257244975600fa24f44c403 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -53,6 +53,11 @@ OMAP DWC3 GLUE It should be set to "1" for HW mode and "2" for SW mode. - ranges: the child address space are mapped 1:1 onto the parent address space +Optional Properties: + - extcon : phandle for the extcon device omap dwc3 uses to detect + connect/disconnect events. + - vbus-supply : phandle to the regulator device tree node if needed. + Sub-nodes: The dwc3 core should be added as subnode to omap dwc3 glue. - dwc3 : diff --git a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt b/Documentation/devicetree/bindings/usb/samsung-hsotg.txt new file mode 100644 index 0000000000000000000000000000000000000000..b83d428a265e20192637d1cd76bf0f274b4b43f7 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/samsung-hsotg.txt @@ -0,0 +1,40 @@ +Samsung High Speed USB OTG controller +----------------------------- + +The Samsung HSOTG IP can be found on Samsung SoCs, from S3C6400 onwards. +It gives functionality of OTG-compliant USB 2.0 host and device with +support for USB 2.0 high-speed (480Mbps) and full-speed (12 Mbps) +operation. + +Currently only device mode is supported. + +Binding details +----- + +Required properties: +- compatible: "samsung,s3c6400-hsotg" should be used for all currently + supported SoC, +- interrupt-parent: phandle for the interrupt controller to which the + interrupt signal of the HSOTG block is routed, +- interrupts: specifier of interrupt signal of interrupt controller, + according to bindings of interrupt controller, +- clocks: contains an array of clock specifiers: + - first entry: OTG clock +- clock-names: contains array of clock names: + - first entry: must be "otg" +- vusb_d-supply: phandle to voltage regulator of digital section, +- vusb_a-supply: phandle to voltage regulator of analog section. + +Example +----- + + hsotg@12480000 { + compatible = "samsung,s3c6400-hsotg"; + reg = <0x12480000 0x20000>; + interrupts = <0 71 0>; + clocks = <&clock 305>; + clock-names = "otg"; + vusb_d-supply = <&vusb_reg>; + vusb_a-supply = <&vusbdac_reg>; + }; + diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt new file mode 100644 index 0000000000000000000000000000000000000000..5752df0e17a2e27790ef6ff7841f5d103fb5bc20 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -0,0 +1,14 @@ +USB xHCI controllers + +Required properties: + - compatible: should be "xhci-platform". + - reg: should contain address and length of the standard XHCI + register set for the device. + - interrupts: one XHCI interrupt should be described here. + +Example: + usb@f0931000 { + compatible = "xhci-platform"; + reg = <0xf0931000 0x8c8>; + interrupts = <0x0 0x4e 0x0>; + }; diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index 8c5be48b43c82189f192e09126c3c63cf9c4db53..a018da4a7ad7527a5b926b6024362dd03a6f2ce1 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -1,8 +1,11 @@ SMSC USB3503 High-Speed Hub Controller Required properties: -- compatible: Should be "smsc,usb3503". -- reg: Specifies the i2c slave address, it should be 0x08. +- compatible: Should be "smsc,usb3503" or "smsc,usb3503a". + +Optional properties: +- reg: Specifies the i2c slave address, it is required and should be 0x08 + if I2C is used. - connect-gpios: Should specify GPIO for connect. - disabled-ports: Should specify the ports unused. '1' or '2' or '3' are availe for this property to describe the port diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 366ce9b872407e1dfb1964079da4fe95d6094df4..2956800f0240c8b3e48c9427151220ef2fc39fc1 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -7,10 +7,12 @@ ad Avionic Design GmbH adi Analog Devices, Inc. aeroflexgaisler Aeroflex Gaisler AB ak Asahi Kasei Corp. +altr Altera Corp. amcc Applied Micro Circuits Corporation (APM, formally AMCC) apm Applied Micro Circuits Corporation (APM) arm ARM Ltd. atmel Atmel Corporation +avago Avago Technologies bosch Bosch Sensortec GmbH brcm Broadcom Corporation cavium Cavium, Inc. @@ -36,6 +38,7 @@ linux Linux-specific binding lsi LSI Corp. (LSI Logic) marvell Marvell Technology Group Ltd. maxim Maxim Integrated Products +microchip Microchip Technology Inc. mosaixtech Mosaix Technologies, Inc. national National Semiconductor nintendo Nintendo diff --git a/Documentation/devicetree/bindings/video/simple-framebuffer.txt b/Documentation/devicetree/bindings/video/simple-framebuffer.txt index 3ea4605831115f9ec1780f9797f57145ff5d76cd..70c26f3a5b9ae26eb6e64e2d230728dca3a48488 100644 --- a/Documentation/devicetree/bindings/video/simple-framebuffer.txt +++ b/Documentation/devicetree/bindings/video/simple-framebuffer.txt @@ -12,6 +12,7 @@ Required properties: - stride: The number of bytes in each line of the framebuffer. - format: The format of the framebuffer surface. Valid values are: - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b). + - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r). Example: diff --git a/Documentation/devicetree/bindings/watchdog/sun4i-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt similarity index 56% rename from Documentation/devicetree/bindings/watchdog/sun4i-wdt.txt rename to Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt index ecd650adff3172350986018d765392b4b04fe49f..e39cb266c8f4cb3a62c1cf8575293f2c39e8a791 100644 --- a/Documentation/devicetree/bindings/watchdog/sun4i-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt @@ -1,8 +1,9 @@ -Allwinner sun4i Watchdog timer +Allwinner SoCs Watchdog timer Required properties: -- compatible : should be "allwinner,sun4i-wdt" +- compatible : should be "allwinner,-wdt", the currently supported + SoC families being sun4i and sun6i - reg : Specifies base physical address and size of the registers. Example: diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt index 0b23261561d28818fdbd630d420211836b6aad6a..e31a2a9d2b075e9dda835218b63fd103cb91d6fa 100644 --- a/Documentation/dma-buf-sharing.txt +++ b/Documentation/dma-buf-sharing.txt @@ -321,7 +321,7 @@ Access to a dma_buf from the kernel context involves three steps: When the importer is done accessing the range specified in begin_cpu_access, it needs to announce this to the exporter (to facilitate cache flushing and - unpinning of any pinned resources). The result of of any dma_buf kmap calls + unpinning of any pinned resources). The result of any dma_buf kmap calls after end_cpu_access is undefined. Interface: diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index b4671459857f825038c9130a1c24336f23b94bdc..fb57d85e7316027f58c336a359e0b1eb6c320f64 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -237,6 +237,12 @@ MEM devm_kzalloc() devm_kfree() +IIO + devm_iio_device_alloc() + devm_iio_device_free() + devm_iio_trigger_alloc() + devm_iio_trigger_free() + IO region devm_request_region() devm_request_mem_region() diff --git a/Documentation/early-userspace/README b/Documentation/early-userspace/README index 661a73fad399b39bedb584a8825f923be1a2a7ae..93e63a9af30b7b0ec63f1cdf3904d92e5731596c 100644 --- a/Documentation/early-userspace/README +++ b/Documentation/early-userspace/README @@ -83,8 +83,7 @@ Where's this all leading? The klibc distribution contains some of the necessary software to make early userspace useful. The klibc distribution is currently -maintained separately from the kernel, but this may change early in -the 2.7 era (it missed the boat for 2.5). +maintained separately from the kernel. You can obtain somewhat infrequent snapshots of klibc from ftp://ftp.kernel.org/pub/linux/libs/klibc/ diff --git a/Documentation/fb/fbcon.txt b/Documentation/fb/fbcon.txt index 99ea58e65eff66ff326590b8657032f234fd7f9f..4a9739abc860651825f62e6ffb71f9b592d57015 100644 --- a/Documentation/fb/fbcon.txt +++ b/Documentation/fb/fbcon.txt @@ -150,7 +150,7 @@ C. Boot options C. Attaching, Detaching and Unloading -Before going on on how to attach, detach and unload the framebuffer console, an +Before going on how to attach, detach and unload the framebuffer console, an illustration of the dependencies may help. The console layer, as with most subsystems, needs a driver that interfaces with diff --git a/Documentation/fb/viafb.modes b/Documentation/fb/viafb.modes index 02e5b487f00e13eaba81532d9b34674865fbd6d5..2a547da2e5ccf1b965ee03db339e16c257dbc89a 100644 --- a/Documentation/fb/viafb.modes +++ b/Documentation/fb/viafb.modes @@ -571,7 +571,7 @@ mode "640x480-60" # 160 chars 800 lines # Blank Time 4.798 us 0.564 ms # 50 chars 28 lines -# Polarity negtive positive +# Polarity negative positive # mode "1280x800-60" # D: 83.500 MHz, H: 49.702 kHz, V: 60.00 Hz diff --git a/Documentation/fb/viafb.txt b/Documentation/fb/viafb.txt index 444e34b52ae164019c77c74ea83384a5ac006f63..1cb2462a71ce6d41a0dc5cfb771aa367adf2d033 100644 --- a/Documentation/fb/viafb.txt +++ b/Documentation/fb/viafb.txt @@ -32,7 +32,7 @@ Start viafb with default settings: #modprobe viafb - Start viafb with with user options: + Start viafb with user options: #modprobe viafb viafb_mode=800x600 viafb_bpp=16 viafb_refresh=60 viafb_active_dev=CRT+DVI viafb_dvi_port=DVP1 viafb_mode1=1024x768 viafb_bpp=16 viafb_refresh1=60 diff --git a/Documentation/filesystems/btrfs.txt b/Documentation/filesystems/btrfs.txt index b349d57b76ea213b5b3c77bf39bf83c88201108f..9dae59407437916759a73e00166b6ba04b2c4e52 100644 --- a/Documentation/filesystems/btrfs.txt +++ b/Documentation/filesystems/btrfs.txt @@ -87,7 +87,7 @@ Unless otherwise specified, all options default to off. device= Specify a device during mount so that ioctls on the control device - can be avoided. Especialy useful when trying to mount a multi-device + can be avoided. Especially useful when trying to mount a multi-device setup as root. May be specified multiple times for multiple devices. discard diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt index 293855e950000ce53223d137b094d266d7911ad3..7ed0d17d67218597c33b46e391a095ca0e3e5aa2 100644 --- a/Documentation/filesystems/ext3.txt +++ b/Documentation/filesystems/ext3.txt @@ -26,11 +26,12 @@ journal=inum When a journal already exists, this option is ignored. Otherwise, it specifies the number of the inode which will represent the ext3 file system's journal file. +journal_path=path journal_dev=devnum When the external journal device's major/minor numbers - have changed, this option allows the user to specify + have changed, these options allow the user to specify the new journal location. The journal device is - identified through its new major/minor numbers encoded - in devnum. + identified through either its new major/minor numbers + encoded in devnum, or via a path to the device. norecovery Don't load the journal on mounting. Note that this forces noload mount of inconsistent filesystem, which can lead to diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index f7cbf574a875271296d93bee53b290ca36c44a66..919a3293aaa4249f81f0d907d9867d6d80f9a135 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -2,7 +2,7 @@ Ext4 Filesystem =============== -Ext4 is an an advanced level of the ext3 filesystem which incorporates +Ext4 is an advanced level of the ext3 filesystem which incorporates scalability and reliability enhancements for supporting large filesystems (64 bit) in keeping with increasing disk capacities and state-of-the-art feature requirements. @@ -144,11 +144,12 @@ journal_async_commit Commit block can be written to disk without waiting mount the device. This will enable 'journal_checksum' internally. +journal_path=path journal_dev=devnum When the external journal device's major/minor numbers - have changed, this option allows the user to specify + have changed, these options allow the user to specify the new journal location. The journal device is - identified through its new major/minor numbers encoded - in devnum. + identified through either its new major/minor numbers + encoded in devnum, or via a path to the device. norecovery Don't load the journal on mounting. Note that noload if the filesystem was not unmounted cleanly, diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index b91e2f26b672451e687b73fb42f18bb2ebd21821..3cd27bed6349ebeb051419b1de18a63e84288649 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -18,8 +18,8 @@ according to its internal geometry or flash memory management scheme, namely FTL F2FS and its tools support various parameters not only for configuring on-disk layout, but also for selecting allocation and cleaning algorithms. -The file system formatting tool, "mkfs.f2fs", is available from the following -git tree: +The following git tree provides the file system formatting tool (mkfs.f2fs), +a consistency checking tool (fsck.f2fs), and a debugging tool (dump.f2fs). >> git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git For reporting bugs and sending patches, please use the following mailing list: @@ -132,6 +132,38 @@ f2fs. Each file shows the whole f2fs information. - average SIT information about whole segments - current memory footprint consumed by f2fs. +================================================================================ +SYSFS ENTRIES +================================================================================ + +Information about mounted f2f2 file systems can be found in +/sys/fs/f2fs. Each mounted filesystem will have a directory in +/sys/fs/f2fs based on its device name (i.e., /sys/fs/f2fs/sda). +The files in each per-device directory are shown in table below. + +Files in /sys/fs/f2fs/ +(see also Documentation/ABI/testing/sysfs-fs-f2fs) +.............................................................................. + File Content + + gc_max_sleep_time This tuning parameter controls the maximum sleep + time for the garbage collection thread. Time is + in milliseconds. + + gc_min_sleep_time This tuning parameter controls the minimum sleep + time for the garbage collection thread. Time is + in milliseconds. + + gc_no_gc_sleep_time This tuning parameter controls the default sleep + time for the garbage collection thread. Time is + in milliseconds. + + gc_idle This parameter controls the selection of victim + policy for garbage collection. Setting gc_idle = 0 + (default) will disable this option. Setting + gc_idle = 1 will select the Cost Benefit approach + & setting gc_idle = 2 will select the greedy aproach. + ================================================================================ USAGE ================================================================================ @@ -149,8 +181,12 @@ USAGE # mkfs.f2fs -l label /dev/block_device # mount -t f2fs /dev/block_device /mnt/f2fs -Format options --------------- +mkfs.f2fs +--------- +The mkfs.f2fs is for the use of formatting a partition as the f2fs filesystem, +which builds a basic on-disk layout. + +The options consist of: -l [label] : Give a volume label, up to 512 unicode name. -a [0 or 1] : Split start location of each area for heap-based allocation. 1 is set by default, which performs this. @@ -164,6 +200,37 @@ Format options -t [0 or 1] : Disable discard command or not. 1 is set by default, which conducts discard. +fsck.f2fs +--------- +The fsck.f2fs is a tool to check the consistency of an f2fs-formatted +partition, which examines whether the filesystem metadata and user-made data +are cross-referenced correctly or not. +Note that, initial version of the tool does not fix any inconsistency. + +The options consist of: + -d debug level [default:0] + +dump.f2fs +--------- +The dump.f2fs shows the information of specific inode and dumps SSA and SIT to +file. Each file is dump_ssa and dump_sit. + +The dump.f2fs is used to debug on-disk data structures of the f2fs filesystem. +It shows on-disk inode information reconized by a given inode number, and is +able to dump all the SSA and SIT entries into predefined files, ./dump_ssa and +./dump_sit respectively. + +The options consist of: + -d debug level [default:0] + -i inode no (hex) + -s [SIT dump segno from #1~#2 (decimal), for all 0~-1] + -a [SSA dump segno from #1~#2 (decimal), for all 0~-1] + +Examples: +# dump.f2fs -i [ino] /dev/sdx +# dump.f2fs -s 0~-1 /dev/sdx (SIT dump) +# dump.f2fs -a 0~-1 /dev/sdx (SSA dump) + ================================================================================ DESIGN ================================================================================ diff --git a/Documentation/filesystems/nfs/Exporting b/Documentation/filesystems/nfs/Exporting index 09994c247289944248eb98c9340b1f5e337ed328..e543b1a619cc95b022f97d3c516687fc98f43735 100644 --- a/Documentation/filesystems/nfs/Exporting +++ b/Documentation/filesystems/nfs/Exporting @@ -93,7 +93,7 @@ For a filesystem to be exportable it must: 2/ make sure that d_splice_alias is used rather than d_add when ->lookup finds an inode for a given parent and name. - If inode is NULL, d_splice_alias(inode, dentry) is eqivalent to + If inode is NULL, d_splice_alias(inode, dentry) is equivalent to d_add(dentry, inode), NULL diff --git a/Documentation/filesystems/nfs/pnfs.txt b/Documentation/filesystems/nfs/pnfs.txt index 52ae07f5f578bc44af9bf02b1bc3530510750fdc..adc81a35fe2d98026bf8cf0f778d315bcb78f407 100644 --- a/Documentation/filesystems/nfs/pnfs.txt +++ b/Documentation/filesystems/nfs/pnfs.txt @@ -12,7 +12,7 @@ struct pnfs_layout_hdr ---------------------- The on-the-wire command LAYOUTGET corresponds to struct pnfs_layout_segment, usually referred to by the variable name lseg. -Each nfs_inode may hold a pointer to a cache of of these layout +Each nfs_inode may hold a pointer to a cache of these layout segments in nfsi->layout, of type struct pnfs_layout_hdr. We reference the header for the inode pointing to it, across each diff --git a/Documentation/filesystems/qnx6.txt b/Documentation/filesystems/qnx6.txt index 99e90184a72fad70453c54cc0974641435cffcbc..408679789136c196df02e0461f9576134e8bab8b 100644 --- a/Documentation/filesystems/qnx6.txt +++ b/Documentation/filesystems/qnx6.txt @@ -149,7 +149,7 @@ Bitmap system area ------------------ The bitmap itself is divided into three parts. -First the system area, that is split into two halfs. +First the system area, that is split into two halves. Then userspace. The requirement for a static, fixed preallocated system area comes from how diff --git a/Documentation/filesystems/relay.txt b/Documentation/filesystems/relay.txt index 510b722667ac885cf7abed3732961941a5ad1c14..33e2f369473375b691f15583c836903728be1c39 100644 --- a/Documentation/filesystems/relay.txt +++ b/Documentation/filesystems/relay.txt @@ -31,7 +31,7 @@ Semantics Each relay channel has one buffer per CPU, each buffer has one or more sub-buffers. Messages are written to the first sub-buffer until it is -too full to contain a new message, in which case it it is written to +too full to contain a new message, in which case it is written to the next (if available). Messages are never split across sub-buffers. At this point, userspace can be notified so it empties the first sub-buffer, while the kernel continues writing to the next. diff --git a/Documentation/filesystems/sysfs-tagging.txt b/Documentation/filesystems/sysfs-tagging.txt index caaaf1266d8f33d37be423f7556ad69bbb1c535a..eb843e49c5a39d558d3bb91b043f47512b2edc59 100644 --- a/Documentation/filesystems/sysfs-tagging.txt +++ b/Documentation/filesystems/sysfs-tagging.txt @@ -24,7 +24,7 @@ flag between KOBJ_NS_TYPE_NONE and KOBJ_NS_TYPES, and s_ns will point to the namespace to which it belongs. Each sysfs superblock's sysfs_super_info contains an array void -*ns[KOBJ_NS_TYPES]. When a a task in a tagging namespace +*ns[KOBJ_NS_TYPES]. When a task in a tagging namespace kobj_nstype first mounts sysfs, a new superblock is created. It will be differentiated from other sysfs mounts by having its s_fs_info->ns[kobj_nstype] set to the new namespace. Note that diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt index 12525b17d9ed545343bd27e952cf366c5d228f51..5be51fd888bd9bccc02f47caca8c0a5b61a9ec76 100644 --- a/Documentation/filesystems/xfs.txt +++ b/Documentation/filesystems/xfs.txt @@ -135,7 +135,7 @@ default behaviour. If the memory cost of 8 log buffers is too high on small systems, then it may be reduced at some cost to performance on metadata intensive workloads. The logbsize option below - controls the size of each buffer and so is also relevent to + controls the size of each buffer and so is also relevant to this case. logbsize=value diff --git a/Documentation/fmc/carrier.txt b/Documentation/fmc/carrier.txt index 173f6d65c88da3bf3bd1653f4d2fa3817c487240..5e4f1dd3e98b3c4327cb65a8b9a1f259305efa32 100644 --- a/Documentation/fmc/carrier.txt +++ b/Documentation/fmc/carrier.txt @@ -213,7 +213,7 @@ The individual methods perform the following tasks: methods: for example the SPEC driver may define that its carrier I2C memory is seen at offset 1M and the internal SPI flash is seen at offset 16M. This multiplexing of several flash memories in the - same address space is is carrier-specific and should only be used + same address space is carrier-specific and should only be used by a driver that has verified the `carrier_name' field. diff --git a/Documentation/hid/uhid.txt b/Documentation/hid/uhid.txt index 3c741214dfbbb028044be22a88c5359f7ba49646..dc35a2b75eeec08743b5e55614508a881589d3c0 100644 --- a/Documentation/hid/uhid.txt +++ b/Documentation/hid/uhid.txt @@ -149,11 +149,13 @@ needs. Only UHID_OUTPUT and UHID_OUTPUT_EV have payloads. is of type "struct uhid_data_req". This may be received even though you haven't received UHID_OPEN, yet. - UHID_OUTPUT_EV: + UHID_OUTPUT_EV (obsolete): Same as UHID_OUTPUT but this contains a "struct input_event" as payload. This is called for force-feedback, LED or similar events which are received through an input device by the HID subsystem. You should convert this into raw reports and send them to your device similar to events of type UHID_OUTPUT. + This is no longer sent by newer kernels. Instead, HID core converts it into a + raw output report and sends it via UHID_OUTPUT. UHID_FEATURE: This event is sent if the kernel driver wants to perform a feature request as diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet index 8d2be8a0b1e38c146a80130d8d96d94ce6025516..86c0b1251c81b27f8bb9020edebad31754116e32 100644 --- a/Documentation/hwmon/abituguru-datasheet +++ b/Documentation/hwmon/abituguru-datasheet @@ -299,7 +299,7 @@ Byte 1: min threshold (scale as bank 0x26) -Warning for the adventerous +Warning for the adventurous =========================== A word of caution to those who want to experiment and see if they can figure diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015 index f6fe9c203733a9508cdfdc0c6b27e1d13921c3e1..063b80d857b1f86e54b2b31c89c77ffdff980847 100644 --- a/Documentation/hwmon/ads1015 +++ b/Documentation/hwmon/ads1015 @@ -6,6 +6,10 @@ Supported chips: Prefix: 'ads1015' Datasheet: Publicly available at the Texas Instruments website : http://focus.ti.com/lit/ds/symlink/ads1015.pdf + * Texas Instruments ADS1115 + Prefix: 'ads1115' + Datasheet: Publicly available at the Texas Instruments website : + http://focus.ti.com/lit/ds/symlink/ads1115.pdf Authors: Dirk Eibach, Guntermann & Drunck GmbH @@ -13,9 +17,9 @@ Authors: Description ----------- -This driver implements support for the Texas Instruments ADS1015. +This driver implements support for the Texas Instruments ADS1015/ADS1115. -This device is a 12-bit A-D converter with 4 inputs. +This device is a 12/16-bit A-D converter with 4 inputs. The inputs can be used single ended or in certain differential combinations. diff --git a/Documentation/hwmon/htu21 b/Documentation/hwmon/htu21 new file mode 100644 index 0000000000000000000000000000000000000000..f39a215fb6ae22e541bb9f0d9cd895121587f44e --- /dev/null +++ b/Documentation/hwmon/htu21 @@ -0,0 +1,46 @@ +Kernel driver htu21 +=================== + +Supported chips: + * Measurement Specialties HTU21D + Prefix: 'htu21' + Addresses scanned: none + Datasheet: Publicly available at the Measurement Specialties website + http://www.meas-spec.com/downloads/HTU21D.pdf + + +Author: + William Markezana + +Description +----------- + +The HTU21D is a humidity and temperature sensor in a DFN package of +only 3 x 3 mm footprint and 0.9 mm height. + +The devices communicate with the I2C protocol. All sensors are set to the +same I2C address 0x40, so an entry with I2C_BOARD_INFO("htu21", 0x40) can +be used in the board setup code. + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices +for details. + +sysfs-Interface +--------------- + +temp1_input - temperature input +humidity1_input - humidity input + +Notes +----- + +The driver uses the default resolution settings of 12 bit for humidity and 14 +bit for temperature, which results in typical measurement times of 11 ms for +humidity and 44 ms for temperature. To keep self heating below 0.1 degree +Celsius, the device should not be active for more than 10% of the time. For +this reason, the driver performs no more than two measurements per second and +reports cached information if polled more frequently. + +Different resolutions, the on-chip heater, using the CRC checksum and reading +the serial number are not supported yet. diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp index 90956b6180254915e9ff17bb968729c20e043369..4dfdc8f836334e97881a6a92373d7702ad2111a8 100644 --- a/Documentation/hwmon/k10temp +++ b/Documentation/hwmon/k10temp @@ -12,6 +12,7 @@ Supported chips: * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series) * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series) * AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity" +* AMD Family 16h processors: "Kabini" Prefix: 'k10temp' Addresses scanned: PCI space diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches index 46286460462b8dde8f89494c93c294d34022d311..3d1bac399a220b074ce542eba81c0fcba505ce99 100644 --- a/Documentation/hwmon/submitting-patches +++ b/Documentation/hwmon/submitting-patches @@ -1,7 +1,7 @@ How to Get Your Patch Accepted Into the Hwmon Subsystem ------------------------------------------------------- -This text is is a collection of suggestions for people writing patches or +This text is a collection of suggestions for people writing patches or drivers for the hwmon subsystem. Following these suggestions will greatly increase the chances of your change being accepted. diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index 90387c3540f70e4cb99e2401b2f608672f51ffc3..f4021a285460353ca0e4a2eda7b934d7839b57ff 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -17,7 +17,7 @@ Credits: Philip Edelbrock , and Mark Studebaker w83792d.c: - Chunhao Huang , + Shane Huang (Winbond), Rudolf Marek Additional contributors: diff --git a/Documentation/hwmon/w83792d b/Documentation/hwmon/w83792d index 8a023ce0b72e7726bf8888b88d304f0be5ce51a3..53f7b6866fec4d51c4049ba6c700d58e1950a046 100644 --- a/Documentation/hwmon/w83792d +++ b/Documentation/hwmon/w83792d @@ -7,8 +7,7 @@ Supported chips: Addresses scanned: I2C 0x2c - 0x2f Datasheet: http://www.winbond.com.tw -Author: Chunhao Huang -Contact: DZShen +Author: Shane Huang (Winbond) Module Parameters diff --git a/Documentation/hwspinlock.txt b/Documentation/hwspinlock.txt index a903ee5e977643e945539d66d4e11e8c6354fb89..62f7d4ea6e26459b74cdccbca9f7a3532ab4900b 100644 --- a/Documentation/hwspinlock.txt +++ b/Documentation/hwspinlock.txt @@ -241,7 +241,7 @@ int hwspinlock_example2(void) locks). Should be called from a process context (this function might sleep). Returns the address of hwspinlock on success, or NULL on error (e.g. - if the hwspinlock is sill in use). + if the hwspinlock is still in use). 5. Important structs diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 index a370b2047cf3025b5a0c318af15c670a76bc41e3..c097e0f020fe1d786bed67fd3ed9e06fd99f7b63 100644 --- a/Documentation/i2c/busses/i2c-piix4 +++ b/Documentation/i2c/busses/i2c-piix4 @@ -73,9 +73,10 @@ this driver on those mainboards. The ServerWorks Southbridges, the Intel 440MX, and the Victory66 are identical to the PIIX4 in I2C/SMBus support. -The AMD SB700 and SP5100 chipsets implement two PIIX4-compatible SMBus -controllers. If your BIOS initializes the secondary controller, it will -be detected by this driver as an "Auxiliary SMBus Host Controller". +The AMD SB700, SB800, SP5100 and Hudson-2 chipsets implement two +PIIX4-compatible SMBus controllers. If your BIOS initializes the +secondary controller, it will be detected by this driver as +an "Auxiliary SMBus Host Controller". If you own Force CPCI735 motherboard or other OSB4 based systems you may need to change the SMBus Interrupt Select register so the SMBus controller uses diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices index 22182660dda762816ad4663588f9e50cb7076622..c70e7a7638d1e6e66cbddd3cf7800325560cad28 100644 --- a/Documentation/i2c/instantiating-devices +++ b/Documentation/i2c/instantiating-devices @@ -19,7 +19,7 @@ i2c_board_info which is registered by calling i2c_register_board_info(). Example (from omap2 h4): -static struct i2c_board_info __initdata h4_i2c_board_info[] = { +static struct i2c_board_info h4_i2c_board_info[] __initdata = { { I2C_BOARD_INFO("isp1301_omap", 0x2d), .irq = OMAP_GPIO_IRQ(125), diff --git a/Documentation/i2c/upgrading-clients b/Documentation/i2c/upgrading-clients index d6991625c407d41102f25a008c4f4801396ec1b7..8e5fbd88c7d1472af8f6d1da1ed5798340cfc345 100644 --- a/Documentation/i2c/upgrading-clients +++ b/Documentation/i2c/upgrading-clients @@ -196,8 +196,8 @@ static int example_probe(struct i2c_client *i2c_client, Update the detach method, by changing the name to _remove and to delete the i2c_detach_client call. It is possible that you -can also remove the ret variable as it is not not needed for -any of the core functions. +can also remove the ret variable as it is not needed for any +of the core functions. - static int example_detach(struct i2c_client *client) + static int example_remove(struct i2c_client *client) diff --git a/Documentation/input/gamepad.txt b/Documentation/input/gamepad.txt new file mode 100644 index 0000000000000000000000000000000000000000..8002c894c6b052f3dc8443b82a69ec2ba36faae1 --- /dev/null +++ b/Documentation/input/gamepad.txt @@ -0,0 +1,156 @@ + Linux Gamepad API +---------------------------------------------------------------------------- + +1. Intro +~~~~~~~~ +Linux provides many different input drivers for gamepad hardware. To avoid +having user-space deal with different button-mappings for each gamepad, this +document defines how gamepads are supposed to report their data. + +2. Geometry +~~~~~~~~~~~ +As "gamepad" we define devices which roughly look like this: + + ____________________________ __ + / [__ZL__] [__ZR__] \ | + / [__ TL __] [__ TR __] \ | Front Triggers + __/________________________________\__ __| + / _ \ | + / /\ __ (N) \ | + / || __ |MO| __ _ _ \ | Main Pad + | <===DP===> |SE| |ST| (W) -|- (E) | | + \ || ___ ___ _ / | + /\ \/ / \ / \ (S) /\ __| + / \________ | LS | ____ | RS | ________/ \ | + | / \ \___/ / \ \___/ / \ | | Control Sticks + | / \_____/ \_____/ \ | __| + | / \ | + \_____/ \_____/ + + |________|______| |______|___________| + D-Pad Left Right Action Pad + Stick Stick + + |_____________| + Menu Pad + +Most gamepads have the following features: + - Action-Pad + 4 buttons in diamonds-shape (on the right side). The buttons are + differently labeled on most devices so we define them as NORTH, + SOUTH, WEST and EAST. + - D-Pad (Direction-pad) + 4 buttons (on the left side) that point up, down, left and right. + - Menu-Pad + Different constellations, but most-times 2 buttons: SELECT - START + Furthermore, many gamepads have a fancy branded button that is used as + special system-button. It often looks different to the other buttons and + is used to pop up system-menus or system-settings. + - Analog-Sticks + Analog-sticks provide freely moveable sticks to control directions. Not + all devices have both or any, but they are present at most times. + Analog-sticks may also provide a digital button if you press them. + - Triggers + Triggers are located on the upper-side of the pad in vertical direction. + Not all devices provide them, but the upper buttons are normally named + Left- and Right-Triggers, the lower buttons Z-Left and Z-Right. + - Rumble + Many devices provide force-feedback features. But are mostly just + simple rumble motors. + +3. Detection +~~~~~~~~~~~~ +All gamepads that follow the protocol described here map BTN_GAMEPAD. This is +an alias for BTN_SOUTH/BTN_A. It can be used to identify a gamepad as such. +However, not all gamepads provide all features, so you need to test for all +features that you need, first. How each feature is mapped is described below. + +Legacy drivers often don't comply to these rules. As we cannot change them +for backwards-compatibility reasons, you need to provide fixup mappings in +user-space yourself. Some of them might also provide module-options that +change the mappings so you can adivce users to set these. + +All new gamepads are supposed to comply with this mapping. Please report any +bugs, if they don't. + +There are a lot of less-featured/less-powerful devices out there, which re-use +the buttons from this protocol. However, they try to do this in a compatible +fashion. For example, the "Nintendo Wii Nunchuk" provides two trigger buttons +and one analog stick. It reports them as if it were a gamepad with only one +analog stick and two trigger buttons on the right side. +But that means, that if you only support "real" gamepads, you must test +devices for _all_ reported events that you need. Otherwise, you will also get +devices that report a small subset of the events. + +No other devices, that do not look/feel like a gamepad, shall report these +events. + +4. Events +~~~~~~~~~ +Gamepads report the following events: + +Action-Pad: + Every gamepad device has at least 2 action buttons. This means, that every + device reports BTN_SOUTH (which BTN_GAMEPAD is an alias for). Regardless + of the labels on the buttons, the codes are sent according to the + physical position of the buttons. + Please note that 2- and 3-button pads are fairly rare and old. You might + want to filter gamepads that do not report all four. + 2-Button Pad: + If only 2 action-buttons are present, they are reported as BTN_SOUTH and + BTN_EAST. For vertical layouts, the upper button is BTN_EAST. For + horizontal layouts, the button more on the right is BTN_EAST. + 3-Button Pad: + If only 3 action-buttons are present, they are reported as (from left + to right): BTN_WEST, BTN_SOUTH, BTN_EAST + If the buttons are aligned perfectly vertically, they are reported as + (from top down): BTN_WEST, BTN_SOUTH, BTN_EAST + 4-Button Pad: + If all 4 action-buttons are present, they can be aligned in two + different formations. If diamond-shaped, they are reported as BTN_NORTH, + BTN_WEST, BTN_SOUTH, BTN_EAST according to their physical location. + If rectangular-shaped, the upper-left button is BTN_NORTH, lower-left + is BTN_WEST, lower-right is BTN_SOUTH and upper-right is BTN_EAST. + +D-Pad: + Every gamepad provides a D-Pad with four directions: Up, Down, Left, Right + Some of these are available as digital buttons, some as analog buttons. Some + may even report both. The kernel does not convert between these so + applications should support both and choose what is more appropriate if + both are reported. + Digital buttons are reported as: + BTN_DPAD_* + Analog buttons are reported as: + ABS_HAT0X and ABS_HAT0Y + +Analog-Sticks: + The left analog-stick is reported as ABS_X, ABS_Y. The right analog stick is + reported as ABS_RX, ABS_RY. Zero, one or two sticks may be present. + If analog-sticks provide digital buttons, they are mapped accordingly as + BTN_THUMBL (first/left) and BTN_THUMBR (second/right). + +Triggers: + Trigger buttons can be available as digital or analog buttons or both. User- + space must correctly deal with any situation and choose the most appropriate + mode. + Upper trigger buttons are reported as BTN_TR or ABS_HAT1X (right) and BTN_TL + or ABS_HAT1Y (left). Lower trigger buttons are reported as BTN_TR2 or + ABS_HAT2X (right/ZR) and BTN_TL2 or ABS_HAT2Y (left/ZL). + If only one trigger-button combination is present (upper+lower), they are + reported as "right" triggers (BTN_TR/ABS_HAT1X). + +Menu-Pad: + Menu buttons are always digital and are mapped according to their location + instead of their labels. That is: + 1-button Pad: Mapped as BTN_START + 2-button Pad: Left button mapped as BTN_SELECT, right button mapped as + BTN_START + Many pads also have a third button which is branded or has a special symbol + and meaning. Such buttons are mapped as BTN_MODE. Examples are the Nintendo + "HOME" button, the XBox "X"-button or Sony "P" button. + +Rumble: + Rumble is adverticed as FF_RUMBLE. + +---------------------------------------------------------------------------- + Written 2013 by David Herrmann diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 7f9d4f53882c457ab8aa7f3e48c5fbbae7e903c2..479eeaf440248b8d56dca90775be614b7cbc9e9e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -235,10 +235,61 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Format: To spoof as Windows 98: ="Microsoft Windows" acpi_osi= [HW,ACPI] Modify list of supported OS interface strings - acpi_osi="string1" # add string1 -- only one string - acpi_osi="!string2" # remove built-in string2 + acpi_osi="string1" # add string1 + acpi_osi="!string2" # remove string2 + acpi_osi=!* # remove all strings + acpi_osi=! # disable all built-in OS vendor + strings acpi_osi= # disable all strings + 'acpi_osi=!' can be used in combination with single or + multiple 'acpi_osi="string1"' to support specific OS + vendor string(s). Note that such command can only + affect the default state of the OS vendor strings, thus + it cannot affect the default state of the feature group + strings and the current state of the OS vendor strings, + specifying it multiple times through kernel command line + is meaningless. This command is useful when one do not + care about the state of the feature group strings which + should be controlled by the OSPM. + Examples: + 1. 'acpi_osi=! acpi_osi="Windows 2000"' is equivalent + to 'acpi_osi="Windows 2000" acpi_osi=!', they all + can make '_OSI("Windows 2000")' TRUE. + + 'acpi_osi=' cannot be used in combination with other + 'acpi_osi=' command lines, the _OSI method will not + exist in the ACPI namespace. NOTE that such command can + only affect the _OSI support state, thus specifying it + multiple times through kernel command line is also + meaningless. + Examples: + 1. 'acpi_osi=' can make 'CondRefOf(_OSI, Local1)' + FALSE. + + 'acpi_osi=!*' can be used in combination with single or + multiple 'acpi_osi="string1"' to support specific + string(s). Note that such command can affect the + current state of both the OS vendor strings and the + feature group strings, thus specifying it multiple times + through kernel command line is meaningful. But it may + still not able to affect the final state of a string if + there are quirks related to this string. This command + is useful when one want to control the state of the + feature group strings to debug BIOS issues related to + the OSPM features. + Examples: + 1. 'acpi_osi="Module Device" acpi_osi=!*' can make + '_OSI("Module Device")' FALSE. + 2. 'acpi_osi=!* acpi_osi="Module Device"' can make + '_OSI("Module Device")' TRUE. + 3. 'acpi_osi=! acpi_osi=!* acpi_osi="Windows 2000"' is + equivalent to + 'acpi_osi=!* acpi_osi=! acpi_osi="Windows 2000"' + and + 'acpi_osi=!* acpi_osi="Windows 2000" acpi_osi=!', + they all will make '_OSI("Windows 2000")' TRUE. + acpi_pm_good [X86] Override the pmtimer bug detection: force the kernel to assume that this machine's pmtimer latches its value @@ -3322,6 +3373,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. them quite hard to use for exploits but might break your system. + vt.color= [VT] Default text color. + Format: 0xYX, X = foreground, Y = background. + Default: 0x07 = light gray on black. + vt.cur_default= [VT] Default cursor shape. Format: 0xCCBBAA, where AA, BB, and CC are the same as the parameters of the [?A;B;Cc escape sequence; @@ -3361,6 +3416,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. overridden by individual drivers. 0 will hide cursors, 1 will display them. + vt.italic= [VT] Default color for italic text; 0-15. + Default: 2 = green. + + vt.underline= [VT] Default color for underlined text; 0-15. + Default: 3 = cyan. + watchdog timers [HW,WDT] For information on watchdog timers, see Documentation/watchdog/watchdog-parameters.txt or other driver-specific files in the diff --git a/Documentation/kmemcheck.txt b/Documentation/kmemcheck.txt index c28f82895d6bea2b5561f6c56f3b2e7bfa126754..9398a501fdb913a1564614dc10c0ce20d0a95f33 100644 --- a/Documentation/kmemcheck.txt +++ b/Documentation/kmemcheck.txt @@ -91,9 +91,9 @@ information from the kmemcheck warnings, which is extremely valuable in debugging a problem. This option is not mandatory, however, because it slows down the compilation process and produces a much bigger kernel image. -Now the kmemcheck menu should be visible (under "Kernel hacking" / "kmemcheck: -trap use of uninitialized memory"). Here follows a description of the -kmemcheck configuration variables: +Now the kmemcheck menu should be visible (under "Kernel hacking" / "Memory +Debugging" / "kmemcheck: trap use of uninitialized memory"). Here follows +a description of the kmemcheck configuration variables: o CONFIG_KMEMCHECK diff --git a/Documentation/ko_KR/HOWTO b/Documentation/ko_KR/HOWTO index 2f48f205fedcbd880acbbda885d595f44d1e507e..680e64635958a1be47e51948ce444f3838758595 100644 --- a/Documentation/ko_KR/HOWTO +++ b/Documentation/ko_KR/HOWTO @@ -182,8 +182,8 @@ Documentation/DocBook/ 디렉토리 ë‚´ì—ì„œ 만들어지며 PDF, Postscript, H 프로ì íŠ¸ë¥¼ ë´ì•¼ 한다. http://kernelnewbies.org ê·¸ê³³ì€ ê±°ì˜ ëª¨ë“  ì¢…ë¥˜ì˜ ê¸°ë³¸ì ì¸ ì»¤ë„ ê°œë°œ 질문들(질문하기 ì „ì— ë¨¼ì € -ì•„ì¹´ì´ë¸Œë¥¼ 찾아ë´ë¼. ê³¼ê±°ì— ì´ë¯¸ 답변ë˜ì—ˆì„ ìˆ˜ë„ ìžˆë‹¤)ì„ í• ìˆ˜ìžˆëŠ” ë„ì›€ì´ -ë ë§Œí•œ ë©”ì¼ë§ 리스트가 있다. ë˜í•œ 실시간으로 질문 할수 있는 IRC 채ë„ë„ +ì•„ì¹´ì´ë¸Œë¥¼ 찾아ë´ë¼. ê³¼ê±°ì— ì´ë¯¸ 답변ë˜ì—ˆì„ ìˆ˜ë„ ìžˆë‹¤)ì„ í•  수 있는 ë„ì›€ì´ +ë ë§Œí•œ ë©”ì¼ë§ 리스트가 있다. ë˜í•œ 실시간으로 질문 í•  수 있는 IRC 채ë„ë„ ê°€ì§€ê³  있으며 리눅스 ì»¤ë„ ê°œë°œì„ ë°°ìš°ëŠ” ë° ìœ ìš©í•œ ë¬¸ì„œë“¤ì„ ë³´ìœ í•˜ê³  있다. 웹사ì´íŠ¸ëŠ” 코드구성, 서브시스템들, 그리고 현재 프로ì íŠ¸ë“¤ @@ -245,7 +245,7 @@ Documentation/DocBook/ 디렉토리 ë‚´ì—ì„œ 만들어지며 PDF, Postscript, H ê²ƒì„ ê¸°ì–µí•´ë¼. 왜ëƒí•˜ë©´ ë³€ê²½ì´ ìžì²´ë‚´ì—서만 ë°œìƒí•˜ê³  ì¶”ê°€ëœ ì½”ë“œê°€ ë“œë¼ì´ë²„ ì™¸ë¶€ì˜ ë‹¤ë¥¸ 부분ì—는 ì˜í–¥ì„ 주지 않으므로 그런 ë³€ê²½ì€ íšŒê·€(ì—­ìžì£¼: ì´ì „ì—는 존재하지 않았지만 새로운 기능추가나 변경으로 ì¸í•´ - ìƒê²¨ë‚œ 버그)를 ì¼ìœ¼í‚¬ 만한 ìœ„í—˜ì„ ê°€ì§€ê³  있지 않기 때문ì´ë‹¤. -rc1ì´ + ìƒê²¨ë‚œ 버그)를 ì¼ìœ¼í‚¬ 만한 ìœ„í—˜ì„ ê°€ì§€ê³  있지 않기 때문ì´ë‹¤. -rc1ì´ ë°°í¬ëœ ì´í›„ì— git를 사용하여 íŒ¨ì¹˜ë“¤ì„ Linusì—게 보낼수 있지만 íŒ¨ì¹˜ë“¤ì€ ê³µì‹ì ì¸ ë©”ì¼ë§ 리스트로 ë³´ë‚´ì„œ 검토를 ë°›ì„ í•„ìš”ê°€ 있다. - 새로운 -rc는 Linusê°€ 현재 git treeê°€ 테스트 í•˜ê¸°ì— ì¶©ë¶„ížˆ ì•ˆì •ëœ ìƒíƒœì— @@ -455,7 +455,7 @@ bugme-janitor ë©”ì¼ë§ 리스트(bugzillaì— ëª¨ë“  ë³€í™”ë“¤ì´ ì—¬ê¸°ì„œ ë©” - ì˜ê²¬ - ë³€ê²½ì„ ìœ„í•œ 요구 - ë‹¹ìœ„ì„±ì„ ìœ„í•œ 요구 - - ê³ ìš” + - 침묵 기억하ë¼. ì´ê²ƒë“¤ì€ ì—¬ëŸ¬ë¶„ì˜ íŒ¨ì¹˜ê°€ 커ë„ë¡œ 들어가기 위한 과정ì´ë‹¤. ì—¬ëŸ¬ë¶„ì˜ íŒ¨ì¹˜ë“¤ì€ ë¹„íŒê³¼ 다른 ì˜ê²¬ì„ ë°›ì„ ìˆ˜ 있고 ê·¸ê²ƒë“¤ì„ ê¸°ìˆ ì ì¸ 레벨로 í‰ê°€í•˜ê³  @@ -472,7 +472,7 @@ bugme-janitor ë©”ì¼ë§ 리스트(bugzillaì— ëª¨ë“  ë³€í™”ë“¤ì´ ì—¬ê¸°ì„œ ë©” 가능한한 가장 ì¢‹ì€ ê¸°ìˆ ì ì¸ í•´ë‹µì„ ì°¾ê³  있는 커뮤니티ì—서는 í•­ìƒ ì–´ë–¤ 패치가 얼마나 좋ì€ì§€ì— 관하여 다른 ì˜ê²¬ë“¤ì´ ìžˆì„ ìˆ˜ 있다. ì—¬ëŸ¬ë¶„ì€ í˜‘ì¡°ì ì´ì–´ì•¼ 하고 ê¸°êº¼ì´ ì—¬ëŸ¬ë¶„ì˜ ìƒê°ì„ ì»¤ë„ ë‚´ì— ë§žì¶”ì–´ì•¼ 한다. 아니면 -ì ì–´ë„ ì—¬ëŸ¬ë¶„ì˜ ê²ƒì´ ê°€ì¹˜ìžˆë‹¤ëŠ” ê²ƒì„ ì¤‘ëª…í•˜ì—¬ì•¼ 한다. ìž˜ëª»ëœ ê²ƒë„ ì—¬ëŸ¬ë¶„ì´ +ì ì–´ë„ ì—¬ëŸ¬ë¶„ì˜ ê²ƒì´ ê°€ì¹˜ìžˆë‹¤ëŠ” ê²ƒì„ ì¦ëª…하여야 한다. ìž˜ëª»ëœ ê²ƒë„ ì—¬ëŸ¬ë¶„ì´ ì˜¬ë°”ë¥¸ ë°©í–¥ì˜ í•´ê²°ì±…ìœ¼ë¡œ ì´ëŒì–´ê°ˆ ì˜ì§€ê°€ 있다면 받아들여질 것ì´ë¼ëŠ” ì ì„ 기억하ë¼. @@ -488,21 +488,21 @@ bugme-janitor ë©”ì¼ë§ 리스트(bugzillaì— ëª¨ë“  ë³€í™”ë“¤ì´ ì—¬ê¸°ì„œ ë©” ì»¤ë„ ì»¤ë®¤ë‹ˆí‹°ëŠ” 가장 전통ì ì¸ íšŒì‚¬ì˜ ê°œë°œ 환경과는 다르다. ì—¬ê¸°ì— ì—¬ëŸ¬ë¶„ë“¤ì˜ ë¬¸ì œë¥¼ 피하기 위한 목ë¡ì´ 있다. ì—¬ëŸ¬ë¶„ë“¤ì´ ì œì•ˆí•œ ë³€ê²½ë“¤ì— ê´€í•˜ì—¬ ë§í•  ë•Œ ì¢‹ì€ ê²ƒë“¤ : - - "ì´ê²ƒì€ 여러 ë¬¸ì œë“¤ì„ í•´ê²¹í•©ë‹ˆë‹¤." - - "ì´ê²ƒì€ 2000 ë¼ì¸ì˜ 코드를 제거합니다." + - "ì´ê²ƒì€ 여러 ë¬¸ì œë“¤ì„ í•´ê²°í•©ë‹ˆë‹¤." + - "ì´ê²ƒì€ 2000 ë¼ì¸ì˜ 코드를 줄입니다." - "ì´ê²ƒì€ ë‚´ê°€ ë§í•˜ë ¤ëŠ” ê²ƒì— ê´€í•´ 설명하는 패치입니다." - - "나는 5ê°œì˜ ë‹¤ë¥¸ 아키í…ì³ì—ì„œ ê·¸ê²ƒì„ í…ŒìŠ¤íŠ¸í–ˆìŠ´ìœ¼ë¡œ..." - - "ì—¬ê¸°ì— ì¼ë ¨ì˜ ìž‘ì€ íŒ¨ì¹˜ë“¤ì´ ìžˆìŠ´ìŒë¡œ..." - - "ì´ê²ƒì€ ì¼ë°˜ì ì¸ 머신ì—ì„œ ì„±ëŠ¥ì„ í–¥ìƒì‹œí‚´ìœ¼ë¡œ..." + - "나는 5ê°œì˜ ë‹¤ë¥¸ 아키í…ì³ì—ì„œ ê·¸ê²ƒì„ í…ŒìŠ¤íŠ¸ 했으므로..." + - "ì—¬ê¸°ì— ì¼ë ¨ì˜ ìž‘ì€ íŒ¨ì¹˜ë“¤ì´ ìžˆìœ¼ë¯€ë¡œ..." + - "ì´ê²ƒì€ ì¼ë°˜ì ì¸ 머신ì—ì„œ ì„±ëŠ¥ì„ í–¥ìƒí•¨ìœ¼ë¡œ..." ì—¬ëŸ¬ë¶„ë“¤ì´ ë§í•  ë•Œ 피해야 í•  좋지 ì•Šì€ ê²ƒë“¤ : - - "우리를 ê·¸ê²ƒì„ AIT/ptx/Solarisì—ì„œ ì´ëŸ¬í•œ 방법으로 했다. 그러므로 ê·¸ê²ƒì€ ì¢‹ì€ ê²ƒìž„ì— í‹€ë¦½ì—†ë‹¤..." + - "우리는 ê·¸ê²ƒì„ AIX/ptx/Solarisì—ì„œ ì´ëŸ¬í•œ 방법으로 했다. 그러므로 ê·¸ê²ƒì€ ì¢‹ì€ ê²ƒìž„ì— í‹€ë¦¼ì—†ë‹¤..." - "나는 20ë…„ë™ì•ˆ ì´ê²ƒì„ 해왔다. 그러므로..." - "ì´ê²ƒì€ ëˆì„ 벌기위해 ë‚˜ì˜ íšŒì‚¬ê°€ 필요로 하는 것ì´ë‹¤." - "ì´ê²ƒì€ ìš°ë¦¬ì˜ ì—”í„°í”„ë¼ì´ì¦ˆ ìƒí’ˆ ë¼ì¸ì„ 위한 것ì´ë‹¤." - "ì—¬ê¸°ì— ë‚˜ì˜ ìƒê°ì„ ë§í•˜ê³  있는 1000 페ì´ì§€ 설계 문서가 있다." - "나는 6달ë™ì•ˆ ì´ê²ƒì„ 했으니..." - - "ì—¬ê¸°ì— 5000ë¼ì¸ 짜리 패치가 있으니..." + - "ì—¬ê¸°ì— 5000 ë¼ì¸ 짜리 패치가 있으니..." - "나는 현재 ë’¤ì£½ë°•ì£½ì¸ ê²ƒì„ ìž¬ìž‘ì„±í–ˆë‹¤. 그리고 여기ì—..." - "나는 마ê°ì‹œí•œì„ 가지고 있으므로 ì´ íŒ¨ì¹˜ëŠ” 지금 ì ìš©ë  필요가 있다." @@ -574,6 +574,7 @@ Patì´ë¼ëŠ” ì´ë¦„ì„ ê°€ì§„ ì—¬ìžê°€ ìžˆì„ ìˆ˜ë„ ìžˆëŠ” 것ì´ë‹¤. 리눅 ë˜í•œ 완성ë˜ì§€ 않았고 "ë‚˜ì¤‘ì— ìˆ˜ì •ë  ê²ƒì´ë‹¤." 와 ê°™ì€ ê²ƒë“¤ì„ í¬í•¨í•˜ëŠ” íŒ¨ì¹˜ë“¤ì€ ë°›ì•„ë“¤ì—¬ì§€ì§€ ì•Šì„ ê²ƒì´ë¼ëŠ” ì ì„ 유ë…하ë¼. + ë³€ê²½ì„ ì •ë‹¹í™”í•´ë¼ ----------------- diff --git a/Documentation/ko_KR/stable_api_nonsense.txt b/Documentation/ko_KR/stable_api_nonsense.txt index 8f2b0e1d98c4b36f272654b7a66b9907e4a27ae9..51f85ade41901f8c221f334fb45877967cddcd46 100644 --- a/Documentation/ko_KR/stable_api_nonsense.txt +++ b/Documentation/ko_KR/stable_api_nonsense.txt @@ -106,12 +106,12 @@ Greg Kroah-Hartman --------------------------------- 리눅스 ì»¤ë„ ë“œë¼ì´ë²„를 계ì†í•´ì„œ ë©”ì¸ ì»¤ë„ íŠ¸ë¦¬ì— ë°˜ì˜í•˜ì§€ ì•Šê³  -유지보수하려고 하는 사름들과 ì´ ë¬¸ì œë¥¼ ë…¼ì˜í•˜ê²Œ ë˜ë©´ 훨씬 ë” +유지보수하려고 하는 사람들과 ì´ ë¬¸ì œë¥¼ ë…¼ì˜í•˜ê²Œ ë˜ë©´ 훨씬 ë” "ë…¼ëž€ì˜ ì—¬ì§€ê°€ 많ì€" 주제가 ë  ê²ƒì´ë‹¤. 리눅스 ì»¤ë„ ê°œë°œì€ ëŠìž„ì—†ì´ ë¹ ë¥¸ ì†ë„ë¡œ ì´ë£¨ì–´ì§€ê³  있으며 ê²°ì½” ëŠìŠ¨í•´ì§„ ì ì´ 없다. ì»¤ë„ ê°œë°œìžë“¤ì´ 현재 ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì—ì„œ 버그를 -발견하거나 무엇ì¸ê°€ 할수 있는 ë” ì¢‹ì€ ë°©ë²•ì„ ì°¾ê²Œ ë˜ì—ˆë‹¤ê³  하ìž. +발견하거나 무엇ì¸ê°€ í•  수 있는 ë” ì¢‹ì€ ë°©ë²•ì„ ì°¾ê²Œ ë˜ì—ˆë‹¤ê³  하ìž. ê·¸ë“¤ì´ ë°œê²¬í•œ ê²ƒì„ ì‹¤í–‰í•œë‹¤ë©´ ì•„ë§ˆë„ ë” ìž˜ ë™ìž‘하ë„ë¡ í˜„ìž¬ ì¸í„°íŽ˜ì´ìŠ¤ë“¤ì„ 수정하게 ë  ê²ƒì´ë‹¤. ê·¸ë“¤ì´ ê·¸ëŸ° ì¼ì„ 하게ë˜ë©´ 함수 ì´ë¦„ë“¤ì€ ë³€í•˜ê²Œ ë˜ê³ , êµ¬ì¡°ì²´ë“¤ì€ ëŠ˜ì–´ë‚˜ê±°ë‚˜ 줄어들게 ë˜ê³ , 함수 파ë¼ë¯¸í„°ë“¤ì€ ìž¬ìž‘ì—…ë  ê²ƒì´ë‹¤. @@ -174,7 +174,7 @@ GPLì„ ë”°ë¥´ëŠ” ë°°í¬ ë“œë¼ì´ë²„ì— ê´€í•´ 얘기하고 있다는 ê²ƒì„ ìƒ ë™ìž‘하는 ê²ƒì„ ë³´ìž¥í•œë‹¤. ë©”ì¸ ì»¤ë„ íŠ¸ë¦¬ì— ì—¬ëŸ¬ë¶„ì˜ ë“œë¼ì´ë²„를 ë°˜ì˜í•˜ë©´ 얻게 ë˜ëŠ” 장ì ë“¤ì€ 다ìŒê³¼ 같다. - - ê´€ë¦¬ì˜ ë“œëŠ” 비용(ì›ëž˜ 개발ìžì˜)ì€ ì¤„ì–´ì¤„ë©´ì„œ ë“œë¼ì´ë²„ì˜ ì§ˆì€ í–¥ìƒë  것ì´ë‹¤. + - ê´€ë¦¬ì— ë“œëŠ” 비용(ì›ëž˜ 개발ìžì˜)ì€ ì¤„ì–´ì¤„ë©´ì„œ ë“œë¼ì´ë²„ì˜ ì§ˆì€ í–¥ìƒë  것ì´ë‹¤. - 다른 개발ìžë“¤ì´ ì—¬ëŸ¬ë¶„ì˜ ë“œë¼ì´ë²„ì— ê¸°ëŠ¥ë“¤ì„ ì¶”ê°€ í•  것ì´ë‹¤. - 다른 ì‚¬ëžŒë“¤ì€ ì—¬ëŸ¬ë¶„ì˜ ë“œë¼ì´ë²„ì— ë²„ê·¸ë¥¼ 발견하고 수정할 것ì´ë‹¤. - 다른 ì‚¬ëžŒë“¤ì€ ì—¬ëŸ¬ë¶„ì˜ ë“œë¼ì´ë²„ì˜ ê°œì„ ì ì„ ì°¾ì„ ì¤„ 것ì´ë‹¤. diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt index 69f9fb3701e07804961f931ef76ea5716b4f8312..79a1bc675a8dd468bf2b9153690459230196408a 100644 --- a/Documentation/laptops/asus-laptop.txt +++ b/Documentation/laptops/asus-laptop.txt @@ -8,8 +8,8 @@ http://acpi4asus.sf.net/ This driver provides support for extra features of ACPI-compatible ASUS laptops. It may also support some MEDION, JVC or VICTOR laptops (such as MEDION 9675 or - VICTOR XP7210 for example). It makes all the extra buttons generate standard - ACPI events that go through /proc/acpi/events and input events (like keyboards). + VICTOR XP7210 for example). It makes all the extra buttons generate input + events (like keyboards). On some models adds support for changing the display brightness and output, switching the LCD backlight on and off, and most importantly, allows you to blink those fancy LEDs intended for reporting mail and wireless status. @@ -55,8 +55,8 @@ Usage DSDT) to me. That's all, now, all the events generated by the hotkeys of your laptop - should be reported in your /proc/acpi/event entry. You can check with - "acpi_listen". + should be reported via netlink events. You can check with + "acpi_genl monitor" (part of the acpica project). Hotkeys are also reported as input keys (like keyboards) you can check which key are supported using "xev" under X11. diff --git a/Documentation/laptops/sony-laptop.txt b/Documentation/laptops/sony-laptop.txt index 0d5ac7f5287e611d4aa171937a1d83b31d0f6038..978b1e615155da1e4ddd24429c63708795965dd2 100644 --- a/Documentation/laptops/sony-laptop.txt +++ b/Documentation/laptops/sony-laptop.txt @@ -12,10 +12,10 @@ Fn keys (hotkeys): ------------------ Some models report hotkeys through the SNC or SPIC devices, such events are reported both through the ACPI subsystem as acpi events and through the INPUT -subsystem. See the logs of acpid or /proc/acpi/event and -/proc/bus/input/devices to find out what those events are and which input -devices are created by the driver. Additionally, loading the driver with the -debug option will report all events in the kernel log. +subsystem. See the logs of /proc/bus/input/devices to find out what those +events are and which input devices are created by the driver. +Additionally, loading the driver with the debug option will report all events +in the kernel log. The "scancodes" passed to the input system (that can be remapped with udev) are indexes to the table "sony_laptop_input_keycode_map" in the sony-laptop.c diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index cf7bc6cb9719adca0bf96f2f65e7640f8866ceb2..86c52360ffe7326cce53541897d4aa98b86f0e8a 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -329,20 +329,6 @@ sysfs notes: This attribute has poll()/select() support. - hotkey_report_mode: - Returns the state of the procfs ACPI event report mode - filter for hot keys. If it is set to 1 (the default), - all hot key presses are reported both through the input - layer and also as ACPI events through procfs (but not - through netlink). If it is set to 2, hot key presses - are reported only through the input layer. - - This attribute is read-only in kernels 2.6.23 or later, - and read-write on earlier kernels. - - May return -EPERM (write access locked out by module - parameter) or -EACCES (read-only). - wakeup_reason: Set to 1 if the system is waking up because the user requested a bay ejection. Set to 2 if the system is @@ -518,24 +504,21 @@ SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A Non hotkey ACPI HKEY event map: ------------------------------- -Events that are not propagated by the driver, except for legacy -compatibility purposes when hotkey_report_mode is set to 1: - -0x5001 Lid closed -0x5002 Lid opened -0x5009 Tablet swivel: switched to tablet mode -0x500A Tablet swivel: switched to normal mode -0x7000 Radio Switch may have changed state - Events that are never propagated by the driver: 0x2304 System is waking up from suspend to undock 0x2305 System is waking up from suspend to eject bay 0x2404 System is waking up from hibernation to undock 0x2405 System is waking up from hibernation to eject bay +0x5001 Lid closed +0x5002 Lid opened +0x5009 Tablet swivel: switched to tablet mode +0x500A Tablet swivel: switched to normal mode 0x5010 Brightness level changed/control event 0x6000 KEYBOARD: Numlock key pressed 0x6005 KEYBOARD: Fn key pressed (TO BE VERIFIED) +0x7000 Radio Switch may have changed state + Events that are propagated by the driver to userspace: @@ -574,50 +557,6 @@ operating system is to force either an immediate suspend or hibernate cycle, or a system shutdown. Obviously, something is very wrong if this happens. -Compatibility notes: - -ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never -supported the input layer, and sent events over the procfs ACPI event -interface. - -To avoid sending duplicate events over the input layer and the ACPI -event interface, thinkpad-acpi 0.16 implements a module parameter -(hotkey_report_mode), and also a sysfs device attribute with the same -name. - -Make no mistake here: userspace is expected to switch to using the input -layer interface of thinkpad-acpi, together with the ACPI netlink event -interface in kernels 2.6.23 and later, or with the ACPI procfs event -interface in kernels 2.6.22 and earlier. - -If no hotkey_report_mode module parameter is specified (or it is set to -zero), the driver defaults to mode 1 (see below), and on kernels 2.6.22 -and earlier, also allows one to change the hotkey_report_mode through -sysfs. In kernels 2.6.23 and later, where the netlink ACPI event -interface is available, hotkey_report_mode cannot be changed through -sysfs (it is read-only). - -If the hotkey_report_mode module parameter is set to 1 or 2, it cannot -be changed later through sysfs (any writes will return -EPERM to signal -that hotkey_report_mode was locked. On 2.6.23 and later, where -hotkey_report_mode cannot be changed at all, writes will return -EACCES). - -hotkey_report_mode set to 1 makes the driver export through the procfs -ACPI event interface all hot key presses (which are *also* sent to the -input layer). This is a legacy compatibility behaviour, and it is also -the default mode of operation for the driver. - -hotkey_report_mode set to 2 makes the driver filter out the hot key -presses from the procfs ACPI event interface, so these events will only -be sent through the input layer. Userspace that has been updated to use -the thinkpad-acpi input layer interface should set hotkey_report_mode to -2. - -Hot key press events are never sent to the ACPI netlink event interface. -Really up-to-date userspace under kernel 2.6.23 and later is to use the -netlink interface and the input layer interface, and don't bother at all -with hotkey_report_mode. - Brightness hotkey notes: diff --git a/Documentation/leds/leds-lm3556.txt b/Documentation/leds/leds-lm3556.txt index d9eb91b5191353b68c84924ef0a62fe8716de41a..62278e871b503cfdc9ba31e99a92a82cd0d42d12 100644 --- a/Documentation/leds/leds-lm3556.txt +++ b/Documentation/leds/leds-lm3556.txt @@ -71,7 +71,7 @@ To register the chip at address 0x63 on specific adapter, set the platform data according to include/linux/platform_data/leds-lm3556.h, set the i2c board info Example: - static struct i2c_board_info __initdata board_i2c_ch4[] = { + static struct i2c_board_info board_i2c_ch4[] __initdata = { { I2C_BOARD_INFO(LM3556_NAME, 0x63), .platform_data = &lm3556_pdata, diff --git a/Documentation/leds/leds-lp3944.txt b/Documentation/leds/leds-lp3944.txt index c6eda18b15efbb0ceec0b2a25e8f6e06ada488cc..e88ac3b60c0813936f1a33a3cb932c1991c72aa3 100644 --- a/Documentation/leds/leds-lp3944.txt +++ b/Documentation/leds/leds-lp3944.txt @@ -37,7 +37,7 @@ registered using the i2c_board_info mechanism. To register the chip at address 0x60 on adapter 0, set the platform data according to include/linux/leds-lp3944.h, set the i2c board info: - static struct i2c_board_info __initdata a910_i2c_board_info[] = { + static struct i2c_board_info a910_i2c_board_info[] __initdata = { { I2C_BOARD_INFO("lp3944", 0x60), .platform_data = &a910_lp3944_leds, diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index fa5d8a9ae2051184ddba6ce3d1dd769414d2e59f..c8c42e64e953b4cd47d23da125ac5e057d1c158d 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -531,9 +531,10 @@ dependency barrier to make it work correctly. Consider the following bit of code: q = &a; - if (p) + if (p) { + q = &b; - + } x = *q; This will not have the desired effect because there is no actual data @@ -542,9 +543,10 @@ attempting to predict the outcome in advance. In such a case what's actually required is: q = &a; - if (p) + if (p) { + q = &b; - + } x = *q; diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt index 8e5eacbdcfa3f44115ccbc66fff89601c1af38ed..58340d50f8a614ac577bd5b36f60d31d170f9ea9 100644 --- a/Documentation/memory-hotplug.txt +++ b/Documentation/memory-hotplug.txt @@ -163,7 +163,7 @@ a recent addition and not present on older kernels. at read: contains online/offline state of memory. at write: user can specify "online_kernel", "online_movable", "online", "offline" command - which will be performed on al sections in the block. + which will be performed on all sections in the block. 'phys_device' : read-only: designed to show the name of physical memory device. This is not well implemented now. 'removable' : read-only: contains an integer value indicating @@ -210,13 +210,15 @@ If memory device is found, memory hotplug code will be called. 4.2 Notify memory hot-add event by hand ------------ -In some environments, especially virtualized environment, firmware will not -notify memory hotplug event to the kernel. For such environment, "probe" -interface is supported. This interface depends on CONFIG_ARCH_MEMORY_PROBE. - -Now, CONFIG_ARCH_MEMORY_PROBE is supported only by powerpc but it does not -contain highly architecture codes. Please add config if you need "probe" -interface. +On powerpc, the firmware does not notify a memory hotplug event to the kernel. +Therefore, "probe" interface is supported to notify the event to the kernel. +This interface depends on CONFIG_ARCH_MEMORY_PROBE. + +CONFIG_ARCH_MEMORY_PROBE is supported on powerpc only. On x86, this config +option is disabled by default since ACPI notifies a memory hotplug event to +the kernel, which performs its hotplug operation as the result. Please +enable this option if you need the "probe" interface for testing purposes +on x86. Probe interface is located at /sys/devices/system/memory/probe diff --git a/Documentation/mtd/nand_ecc.txt b/Documentation/mtd/nand_ecc.txt index 990efd7a9818fd6c93281d852b5f6b20cc60635c..e129b2479ea8def68c74a0cf65c705334814ef7f 100644 --- a/Documentation/mtd/nand_ecc.txt +++ b/Documentation/mtd/nand_ecc.txt @@ -543,7 +543,7 @@ THe code within the for loop was changed to: } As you can see tmppar is used to accumulate the parity within a for -iteration. In the last 3 statements is is added to par and, if needed, +iteration. In the last 3 statements is added to par and, if needed, to rp12 and rp14. While making the changes I also found that I could exploit that tmppar diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 052e13af2d38d682e975e33e2dc3723c4307f327..c0ffd30eb55eae219cc9a6606ea5b3b71cf01f63 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -81,7 +81,7 @@ int __init foo_probe(void) struct pinctrl_dev *pctl; pctl = pinctrl_register(&foo_desc, , NULL); - if (IS_ERR(pctl)) + if (!pctl) pr_err("could not register foo pin driver\n"); } @@ -795,18 +795,97 @@ special GPIO-handler is registered. GPIO mode pitfalls ================== -Sometime the developer may be confused by a datasheet talking about a pin -being possible to set into "GPIO mode". It appears that what hardware -engineers mean with "GPIO mode" is not necessarily the use case that is -implied in the kernel interface : a pin that you grab from -kernel code and then either listen for input or drive high/low to -assert/deassert some external line. +Due to the naming conventions used by hardware engineers, where "GPIO" +is taken to mean different things than what the kernel does, the developer +may be confused by a datasheet talking about a pin being possible to set +into "GPIO mode". It appears that what hardware engineers mean with +"GPIO mode" is not necessarily the use case that is implied in the kernel +interface : a pin that you grab from kernel code and then +either listen for input or drive high/low to assert/deassert some +external line. Rather hardware engineers think that "GPIO mode" means that you can software-control a few electrical properties of the pin that you would not be able to control if the pin was in some other mode, such as muxed in for a device. +The GPIO portions of a pin and its relation to a certain pin controller +configuration and muxing logic can be constructed in several ways. Here +are two examples: + +(A) + pin config + logic regs + | +- SPI + Physical pins --- pad --- pinmux -+- I2C + | +- mmc + | +- GPIO + pin + multiplex + logic regs + +Here some electrical properties of the pin can be configured no matter +whether the pin is used for GPIO or not. If you multiplex a GPIO onto a +pin, you can also drive it high/low from "GPIO" registers. +Alternatively, the pin can be controlled by a certain peripheral, while +still applying desired pin config properties. GPIO functionality is thus +orthogonal to any other device using the pin. + +In this arrangement the registers for the GPIO portions of the pin controller, +or the registers for the GPIO hardware module are likely to reside in a +separate memory range only intended for GPIO driving, and the register +range dealing with pin config and pin multiplexing get placed into a +different memory range and a separate section of the data sheet. + +(B) + + pin config + logic regs + | +- SPI + Physical pins --- pad --- pinmux -+- I2C + | | +- mmc + | | + GPIO pin + multiplex + logic regs + +In this arrangement, the GPIO functionality can always be enabled, such that +e.g. a GPIO input can be used to "spy" on the SPI/I2C/MMC signal while it is +pulsed out. It is likely possible to disrupt the traffic on the pin by doing +wrong things on the GPIO block, as it is never really disconnected. It is +possible that the GPIO, pin config and pin multiplex registers are placed into +the same memory range and the same section of the data sheet, although that +need not be the case. + +From a kernel point of view, however, these are different aspects of the +hardware and shall be put into different subsystems: + +- Registers (or fields within registers) that control electrical + properties of the pin such as biasing and drive strength should be + exposed through the pinctrl subsystem, as "pin configuration" settings. + +- Registers (or fields within registers) that control muxing of signals + from various other HW blocks (e.g. I2C, MMC, or GPIO) onto pins should + be exposed through the pinctrl subssytem, as mux functions. + +- Registers (or fields within registers) that control GPIO functionality + such as setting a GPIO's output value, reading a GPIO's input value, or + setting GPIO pin direction should be exposed through the GPIO subsystem, + and if they also support interrupt capabilities, through the irqchip + abstraction. + +Depending on the exact HW register design, some functions exposed by the +GPIO subsystem may call into the pinctrl subsystem in order to +co-ordinate register settings across HW modules. In particular, this may +be needed for HW with separate GPIO and pin controller HW modules, where +e.g. GPIO direction is determined by a register in the pin controller HW +module rather than the GPIO HW module. + +Electrical properties of the pin such as biasing and drive strength +may be placed at some pin-specific register in all cases or as part +of the GPIO register in case (B) especially. This doesn't mean that such +properties necessarily pertain to what the Linux kernel calls "GPIO". + Example: a pin is usually muxed in to be used as a UART TX line. But during system sleep, we need to put this pin into "GPIO mode" and ground it. @@ -856,7 +935,7 @@ static unsigned long uart_sleep_mode[] = { PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0), }; -static struct pinctrl_map __initdata pinmap[] = { +static struct pinctrl_map pinmap[] __initdata = { PIN_MAP_MUX_GROUP("uart", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "u0_group", "u0"), PIN_MAP_CONFIGS_PIN("uart", PINCTRL_STATE_DEFAULT, "pinctrl-foo", @@ -951,7 +1030,7 @@ Since the above construct is pretty common there is a helper macro to make it even more compact which assumes you want to use pinctrl-foo and position 0 for mapping, for example: -static struct pinctrl_map __initdata mapping[] = { +static struct pinctrl_map mapping[] __initdata = { PIN_MAP_MUX_GROUP("foo-i2c.o", PINCTRL_STATE_DEFAULT, "pinctrl-foo", NULL, "i2c0"), }; @@ -970,7 +1049,7 @@ static unsigned long i2c_pin_configs[] = { FOO_SLEW_RATE_SLOW, }; -static struct pinctrl_map __initdata mapping[] = { +static struct pinctrl_map mapping[] __initdata = { PIN_MAP_MUX_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", "i2c0"), PIN_MAP_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs), PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs), @@ -984,7 +1063,7 @@ order to explicitly indicate that the states were provided and intended to be empty. Table entry macro PIN_MAP_DUMMY_STATE serves the purpose of defining a named state without causing any pin controller to be programmed: -static struct pinctrl_map __initdata mapping[] = { +static struct pinctrl_map mapping[] __initdata = { PIN_MAP_DUMMY_STATE("foo-i2c.0", PINCTRL_STATE_DEFAULT), }; diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index 262acf56fa79b6cb5973b5e408e6bcd8b437b33d..e9b54de8fdf7509e7d2cf2d3ec73deca5cf6f2e3 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -179,7 +179,7 @@ use the PM_TRACE mechanism documented in Documentation/power/s2ram.txt . To verify that the STR works, it is generally more convenient to use the s2ram tool available from http://suspend.sf.net and documented at -http://en.opensuse.org/SDB:Suspend_to_RAM. +http://en.opensuse.org/SDB:Suspend_to_RAM (S2RAM_LINK). Namely, after writing "freezer", "devices", "platform", "processors", or "core" into /sys/power/pm_test (available if the kernel is compiled with @@ -194,10 +194,10 @@ Among other things, the testing with the help of /sys/power/pm_test may allow you to identify drivers that fail to suspend or resume their devices. They should be unloaded every time before an STR transition. -Next, you can follow the instructions at http://en.opensuse.org/s2ram to test -the system, but if it does not work "out of the box", you may need to boot it -with "init=/bin/bash" and test s2ram in the minimal configuration. In that -case, you may be able to search for failing drivers by following the procedure +Next, you can follow the instructions at S2RAM_LINK to test the system, but if +it does not work "out of the box", you may need to boot it with +"init=/bin/bash" and test s2ram in the minimal configuration. In that case, +you may be able to search for failing drivers by following the procedure analogous to the one described in section 1. If you find some failing drivers, you will have to unload them every time before an STR transition (ie. before you run s2ram), and please report the problems with them. diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index 0b4b63e7e9b63053d3b44a827a803f4314af9527..079160e22bcc0d1bf24be8b07bd93e5b2265970c 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -50,6 +50,19 @@ echo N > /sys/power/image_size before suspend (it is limited to 500 MB by default). +. The resume process checks for the presence of the resume device, +if found, it then checks the contents for the hibernation image signature. +If both are found, it resumes the hibernation image. + +. The resume process may be triggered in two ways: + 1) During lateinit: If resume=/dev/your_swap_partition is specified on + the kernel command line, lateinit runs the resume process. If the + resume device has not been probed yet, the resume process fails and + bootup continues. + 2) Manually from an initrd or initramfs: May be run from + the init script by using the /sys/power/resume file. It is vital + that this be done prior to remounting any filesystems (even as + read-only) otherwise data may be corrupted. Article about goals and implementation of Software Suspend for Linux ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -326,7 +339,7 @@ Q: How can distributions ship a swsusp-supporting kernel with modular disk drivers (especially SATA)? A: Well, it can be done, load the drivers, then do echo into -/sys/power/disk/resume file from initrd. Be sure not to mount +/sys/power/resume file from initrd. Be sure not to mount anything, not even read-only mount, or you are going to lose your data. diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX index 05026ce1875e9969084166b04c60014c04ff863a..6db73df0427848fcd1083445c004e2724205854a 100644 --- a/Documentation/powerpc/00-INDEX +++ b/Documentation/powerpc/00-INDEX @@ -5,13 +5,20 @@ please mail me. 00-INDEX - this file +bootwrapper.txt + - Information on how the powerpc kernel is wrapped for boot on various + different platforms. cpu_features.txt - info on how we support a variety of CPUs with minimal compile-time options. eeh-pci-error-recovery.txt - info on PCI Bus EEH Error Recovery +firmware-assisted-dump.txt + - Documentation on the firmware assisted dump mechanism "fadump". hvcs.txt - IBM "Hypervisor Virtual Console Server" Installation Guide +kvm_440.txt + - Various notes on the implementation of KVM for PowerPC 440. mpc52xx.txt - Linux 2.6.x on MPC52xx family pmu-ebb.txt @@ -19,3 +26,7 @@ pmu-ebb.txt qe_firmware.txt - describes the layout of firmware binaries for the Freescale QUICC Engine and the code that parses and uploads the microcode therein. +ptrace.txt + - Information on the ptrace interfaces for hardware debug registers. +transactional_memory.txt + - Overview of the Power8 transactional memory support. diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 3e8cb73ac43c2be41b7537c156f7d87a1efbba90..445ad743ec814ee4571c175884d3ccce4ffda11a 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -97,7 +97,7 @@ IPv4 addresses: %pI4 1.2.3.4 %pi4 001.002.003.004 - %p[Ii][hnbl] + %p[Ii]4[hnbl] For printing IPv4 dot-separated decimal addresses. The 'I4' and 'i4' specifiers result in a printed address with ('i4') or without ('I4') @@ -168,6 +168,15 @@ UUID/GUID addresses: Where no additional specifiers are used the default little endian order with lower case hex characters will be printed. +dentry names: + %pd{,2,3,4} + %pD{,2,3,4} + + For printing dentry name; if we race with d_move(), the name might be + a mix of old and new ones, but it won't oops. %pd dentry is a safer + equivalent of %s dentry->d_name.name we used to use, %pd prints + n last components. %pD does the same thing for struct file. + struct va_format: %pV @@ -185,11 +194,11 @@ struct va_format: u64 SHOULD be printed with %llu/%llx, (unsigned long long): - printk("%llu", (unsigned long long)u64_var); + printk("%llu", u64_var); s64 SHOULD be printed with %lld/%llx, (long long): - printk("%lld", (long long)s64_var); + printk("%lld", s64_var); If is dependent on a config option for its size (e.g., sector_t, blkcnt_t) or is architecture-dependent for its size (e.g., tcflag_t), use a diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt index 717f5aa388b171bcdffa8115191491aac64f4bd2..28fbd877f85a7971ce446e75278d5cd0f2750318 100644 --- a/Documentation/rapidio/rapidio.txt +++ b/Documentation/rapidio/rapidio.txt @@ -300,7 +300,7 @@ initialization. ------------------------------------------- RapidIO subsystem code organization allows addition of new enumeration/discovery -methods as new configuration options without significant impact to to the core +methods as new configuration options without significant impact to the core RapidIO code. A new enumeration/discovery method has to be attached to one or more mport diff --git a/Documentation/scsi/LICENSE.qla4xxx b/Documentation/scsi/LICENSE.qla4xxx index 78c169f0d7c6b5ac0988195bb10d47446993ce4f..fcc27ad27d74f86523a3f9cb3c22fbd6e3b6c02c 100644 --- a/Documentation/scsi/LICENSE.qla4xxx +++ b/Documentation/scsi/LICENSE.qla4xxx @@ -1,4 +1,4 @@ -Copyright (c) 2003-2012 QLogic Corporation +Copyright (c) 2003-2013 QLogic Corporation QLogic Linux iSCSI Driver This program includes a device driver for Linux 3.x. diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt index 4a4f47e759cde1b852032d5bfb488023322df2b5..12ecfd308e557a4ccbf2878bf36baced83acae22 100644 --- a/Documentation/scsi/hptiop.txt +++ b/Documentation/scsi/hptiop.txt @@ -151,7 +151,7 @@ To send a request to the controller: generated. - The host read the outbound list copy pointer shadow register and compare - with previous saved read ponter N. If they are different, the host will + with previous saved read pointer N. If they are different, the host will read the (N+1)th outbound list unit. The host get the index of the request from the (N+1)th outbound list diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 809d72b8eff1a8217dc5e7666f3e895019421f9c..a46ddb85e83a0dcdf0f2a54fd9b745eadb31cb6f 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -244,6 +244,7 @@ STAC9227/9228/9229/927x 5stack-no-fp D965 5stack without front panel dell-3stack Dell Dimension E520 dell-bios Fixes with Dell BIOS setup + dell-bios-amic Fixes with Dell BIOS setup including analog mic volknob Fixes with volume-knob widget 0x24 auto BIOS setup (default) diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index c3c912d023cc5c184c6f0496344cb1a1a82265eb..42a0a39b77e6a5da339e0f71717a6d3809986c24 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -454,6 +454,8 @@ The generic parser supports the following hints: - need_dac_fix (bool): limits the DACs depending on the channel count - primary_hp (bool): probe headphone jacks as the primary outputs; default true +- multi_io (bool): try probing multi-I/O config (e.g. shared + line-in/surround, mic/clfe jacks) - multi_cap_vol (bool): provide multiple capture volumes - inv_dmic_split (bool): provide split internal mic volume/switch for phase-inverted digital mics diff --git a/Documentation/sound/alsa/README.maya44 b/Documentation/sound/alsa/README.maya44 index 0e41576fa13e429213fdbe4977be5324d7395345..67b2ea1cc31dc40b4d33a3f0b9c2f2b7f491fb52 100644 --- a/Documentation/sound/alsa/README.maya44 +++ b/Documentation/sound/alsa/README.maya44 @@ -120,7 +120,7 @@ Mic Phantom+48V: switch for +48V phantom power for electrostatic microphones on Make sure this is not turned on while any other source is connected to input 1/2. It might damage the source and/or the maya44 card. -Mic/Line input: if switch is is on, input jack 1/2 is microphone input (mono), otherwise line input (stereo). +Mic/Line input: if switch is on, input jack 1/2 is microphone input (mono), otherwise line input (stereo). Bypass: analogue bypass from ADC input to output for channel 1+2. Same as "Monitor" in the windows driver. Bypass 1: same for channel 3+4. diff --git a/Documentation/sound/alsa/compress_offload.txt b/Documentation/sound/alsa/compress_offload.txt index 0bcc55155911083345120cb15cc1afb78094e75d..fd74ff26376e9a2c9a12bb99f33deb1613230630 100644 --- a/Documentation/sound/alsa/compress_offload.txt +++ b/Documentation/sound/alsa/compress_offload.txt @@ -73,7 +73,7 @@ The main requirements are: Design -The new API shares a number of concepts with with the PCM API for flow +The new API shares a number of concepts with the PCM API for flow control. Start, pause, resume, drain and stop commands have the same semantics no matter what the content is. @@ -130,7 +130,7 @@ the settings should remain the exception. The timestamp becomes a multiple field structure. It lists the number of bytes transferred, the number of samples processed and the number of samples rendered/grabbed. All these values can be used to determine -the avarage bitrate, figure out if the ring buffer needs to be +the average bitrate, figure out if the ring buffer needs to be refilled or the delay due to decoding/encoding/io on the DSP. Note that the list of codecs/profiles/modes was derived from the diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 2331eb2141466f9c5038cfa8c6f4157c570ff96a..f21edb9834137ac91a9d1e6789c612ef07deb8c1 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -215,7 +215,7 @@ So for example arch/.../mach-*/board-*.c files might have code like: /* if your mach-* infrastructure doesn't support kernels that can * run on multiple boards, pdata wouldn't benefit from "__init". */ - static struct mysoc_spi_data __initdata pdata = { ... }; + static struct mysoc_spi_data pdata __initdata = { ... }; static __init board_init(void) { diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt index c1a1fd636bf9e0c5ce6152d8cbe26f7c251bf770..a5f985ee1822fe37497d09c08a75acf599cba887 100644 --- a/Documentation/sysfs-rules.txt +++ b/Documentation/sysfs-rules.txt @@ -47,7 +47,7 @@ versions of the sysfs interface. at device creation and removal - the unique key to the device at that point in time - the kernel's path to the device directory without the leading - /sys, and always starting with with a slash + /sys, and always starting with a slash - all elements of a devpath must be real directories. Symlinks pointing to /sys/devices must always be resolved to their real target and the target path must be used to access the device. diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py index 3fe0d812dcecf28262e38e2cfed9d2ff11b41e82..54d29c1320ed665daa5b73c652bf4b50af63b488 100755 --- a/Documentation/target/tcm_mod_builder.py +++ b/Documentation/target/tcm_mod_builder.py @@ -300,7 +300,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " int ret;\n\n" buf += " if (strstr(name, \"tpgt_\") != name)\n" buf += " return ERR_PTR(-EINVAL);\n" - buf += " if (strict_strtoul(name + 5, 10, &tpgt) || tpgt > UINT_MAX)\n" + buf += " if (kstrtoul(name + 5, 10, &tpgt) || tpgt > UINT_MAX)\n" buf += " return ERR_PTR(-EINVAL);\n\n" buf += " tpg = kzalloc(sizeof(struct " + fabric_mod_name + "_tpg), GFP_KERNEL);\n" buf += " if (!tpg) {\n" diff --git a/Documentation/timers/NO_HZ.txt b/Documentation/timers/NO_HZ.txt index 88697584242b604945dac74ff8f3ff2a11df9c36..cca122f25120b310fc1816b342d61adb29f832c6 100644 --- a/Documentation/timers/NO_HZ.txt +++ b/Documentation/timers/NO_HZ.txt @@ -24,8 +24,8 @@ There are three main ways of managing scheduling-clock interrupts workloads, you will normally -not- want this option. These three cases are described in the following three sections, followed -by a third section on RCU-specific considerations and a fourth and final -section listing known issues. +by a third section on RCU-specific considerations, a fourth section +discussing testing, and a fifth and final section listing known issues. NEVER OMIT SCHEDULING-CLOCK TICKS @@ -121,14 +121,15 @@ boot parameter specifies the adaptive-ticks CPUs. For example, "nohz_full=1,6-8" says that CPUs 1, 6, 7, and 8 are to be adaptive-ticks CPUs. Note that you are prohibited from marking all of the CPUs as adaptive-tick CPUs: At least one non-adaptive-tick CPU must remain -online to handle timekeeping tasks in order to ensure that system calls -like gettimeofday() returns accurate values on adaptive-tick CPUs. -(This is not an issue for CONFIG_NO_HZ_IDLE=y because there are no -running user processes to observe slight drifts in clock rate.) -Therefore, the boot CPU is prohibited from entering adaptive-ticks -mode. Specifying a "nohz_full=" mask that includes the boot CPU will -result in a boot-time error message, and the boot CPU will be removed -from the mask. +online to handle timekeeping tasks in order to ensure that system +calls like gettimeofday() returns accurate values on adaptive-tick CPUs. +(This is not an issue for CONFIG_NO_HZ_IDLE=y because there are no running +user processes to observe slight drifts in clock rate.) Therefore, the +boot CPU is prohibited from entering adaptive-ticks mode. Specifying a +"nohz_full=" mask that includes the boot CPU will result in a boot-time +error message, and the boot CPU will be removed from the mask. Note that +this means that your system must have at least two CPUs in order for +CONFIG_NO_HZ_FULL=y to do anything for you. Alternatively, the CONFIG_NO_HZ_FULL_ALL=y Kconfig parameter specifies that all CPUs other than the boot CPU are adaptive-ticks CPUs. This @@ -232,6 +233,29 @@ scheduler will decide where to run them, which might or might not be where you want them to run. +TESTING + +So you enable all the OS-jitter features described in this document, +but do not see any change in your workload's behavior. Is this because +your workload isn't affected that much by OS jitter, or is it because +something else is in the way? This section helps answer this question +by providing a simple OS-jitter test suite, which is available on branch +master of the following git archive: + +git://git.kernel.org/pub/scm/linux/kernel/git/frederic/dynticks-testing.git + +Clone this archive and follow the instructions in the README file. +This test procedure will produce a trace that will allow you to evaluate +whether or not you have succeeded in removing OS jitter from your system. +If this trace shows that you have removed OS jitter as much as is +possible, then you can conclude that your workload is not all that +sensitive to OS jitter. + +Note: this test requires that your system have at least two CPUs. +We do not currently have a good way to remove OS jitter from single-CPU +systems. + + KNOWN ISSUES o Dyntick-idle slows transitions to and from idle slightly. diff --git a/Documentation/tpm/xen-tpmfront.txt b/Documentation/tpm/xen-tpmfront.txt new file mode 100644 index 0000000000000000000000000000000000000000..69346de87ff3c4c5456744d85d80a15116f1d157 --- /dev/null +++ b/Documentation/tpm/xen-tpmfront.txt @@ -0,0 +1,113 @@ +Virtual TPM interface for Xen + +Authors: Matthew Fioravante (JHUAPL), Daniel De Graaf (NSA) + +This document describes the virtual Trusted Platform Module (vTPM) subsystem for +Xen. The reader is assumed to have familiarity with building and installing Xen, +Linux, and a basic understanding of the TPM and vTPM concepts. + +INTRODUCTION + +The goal of this work is to provide a TPM functionality to a virtual guest +operating system (in Xen terms, a DomU). This allows programs to interact with +a TPM in a virtual system the same way they interact with a TPM on the physical +system. Each guest gets its own unique, emulated, software TPM. However, each +of the vTPM's secrets (Keys, NVRAM, etc) are managed by a vTPM Manager domain, +which seals the secrets to the Physical TPM. If the process of creating each of +these domains (manager, vTPM, and guest) is trusted, the vTPM subsystem extends +the chain of trust rooted in the hardware TPM to virtual machines in Xen. Each +major component of vTPM is implemented as a separate domain, providing secure +separation guaranteed by the hypervisor. The vTPM domains are implemented in +mini-os to reduce memory and processor overhead. + +This mini-os vTPM subsystem was built on top of the previous vTPM work done by +IBM and Intel corporation. + + +DESIGN OVERVIEW +--------------- + +The architecture of vTPM is described below: + ++------------------+ +| Linux DomU | ... +| | ^ | +| v | | +| xen-tpmfront | ++------------------+ + | ^ + v | ++------------------+ +| mini-os/tpmback | +| | ^ | +| v | | +| vtpm-stubdom | ... +| | ^ | +| v | | +| mini-os/tpmfront | ++------------------+ + | ^ + v | ++------------------+ +| mini-os/tpmback | +| | ^ | +| v | | +| vtpmmgr-stubdom | +| | ^ | +| v | | +| mini-os/tpm_tis | ++------------------+ + | ^ + v | ++------------------+ +| Hardware TPM | ++------------------+ + + * Linux DomU: The Linux based guest that wants to use a vTPM. There may be + more than one of these. + + * xen-tpmfront.ko: Linux kernel virtual TPM frontend driver. This driver + provides vTPM access to a Linux-based DomU. + + * mini-os/tpmback: Mini-os TPM backend driver. The Linux frontend driver + connects to this backend driver to facilitate communications + between the Linux DomU and its vTPM. This driver is also + used by vtpmmgr-stubdom to communicate with vtpm-stubdom. + + * vtpm-stubdom: A mini-os stub domain that implements a vTPM. There is a + one to one mapping between running vtpm-stubdom instances and + logical vtpms on the system. The vTPM Platform Configuration + Registers (PCRs) are normally all initialized to zero. + + * mini-os/tpmfront: Mini-os TPM frontend driver. The vTPM mini-os domain + vtpm-stubdom uses this driver to communicate with + vtpmmgr-stubdom. This driver is also used in mini-os + domains such as pv-grub that talk to the vTPM domain. + + * vtpmmgr-stubdom: A mini-os domain that implements the vTPM manager. There is + only one vTPM manager and it should be running during the + entire lifetime of the machine. This domain regulates + access to the physical TPM on the system and secures the + persistent state of each vTPM. + + * mini-os/tpm_tis: Mini-os TPM version 1.2 TPM Interface Specification (TIS) + driver. This driver used by vtpmmgr-stubdom to talk directly to + the hardware TPM. Communication is facilitated by mapping + hardware memory pages into vtpmmgr-stubdom. + + * Hardware TPM: The physical TPM that is soldered onto the motherboard. + + +INTEGRATION WITH XEN +-------------------- + +Support for the vTPM driver was added in Xen using the libxl toolstack in Xen +4.3. See the Xen documentation (docs/misc/vtpm.txt) for details on setting up +the vTPM and vTPM Manager stub domains. Once the stub domains are running, a +vTPM device is set up in the same manner as a disk or network device in the +domain's configuration file. + +In order to use features such as IMA that require a TPM to be loaded prior to +the initrd, the xen-tpmfront driver must be compiled in to the kernel. If not +using such features, the driver can be compiled as a module and will be loaded +as usual. diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index b937c6e2163c0997b6ffbcf4159503f1eb1bedc9..ea2d35d64d26f50226ddceeec795effaf6bbf6c9 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -735,7 +735,7 @@ Here are the available options: function as well as the function being traced. print-parent: - bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul + bash-4000 [01] 1477.606694: simple_strtoul <-kstrtoul noprint-parent: bash-4000 [01] 1477.606694: simple_strtoul @@ -759,7 +759,7 @@ Here are the available options: latency-format option is enabled. bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \ - (+0.000ms): simple_strtoul (strict_strtoul) + (+0.000ms): simple_strtoul (kstrtoul) raw - This will display raw numbers. This option is best for use with user applications that can translate the raw diff --git a/Documentation/trace/tracepoints.txt b/Documentation/trace/tracepoints.txt index da49437d5aeb774f5d865959fc4d87dcbdc79ac1..ac4170dd0f24d9adb67c9b857739e06926d39d0b 100644 --- a/Documentation/trace/tracepoints.txt +++ b/Documentation/trace/tracepoints.txt @@ -40,7 +40,13 @@ Two elements are required for tracepoints : In order to use tracepoints, you should include linux/tracepoint.h. -In include/trace/subsys.h : +In include/trace/events/subsys.h : + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM subsys + +#if !defined(_TRACE_SUBSYS_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_SUBSYS_H #include @@ -48,10 +54,16 @@ DECLARE_TRACE(subsys_eventname, TP_PROTO(int firstarg, struct task_struct *p), TP_ARGS(firstarg, p)); +#endif /* _TRACE_SUBSYS_H */ + +/* This part must be outside protection */ +#include + In subsys/file.c (where the tracing statement must be added) : -#include +#include +#define CREATE_TRACE_POINTS DEFINE_TRACE(subsys_eventname); void somefct(void) @@ -72,6 +84,9 @@ Where : - TP_ARGS(firstarg, p) are the parameters names, same as found in the prototype. +- if you use the header in multiple source files, #define CREATE_TRACE_POINTS + should appear only in one source file. + Connecting a function (probe) to a tracepoint is done by providing a probe (function to call) for the specific tracepoint through register_trace_subsys_eventname(). Removing a probe is done through diff --git a/Documentation/usb/URB.txt b/Documentation/usb/URB.txt index 00d2c644068e9ae5d0e0044150289f0976a0ae9d..50da0d4554445f30ce00809eb9dc50c30bcfcf48 100644 --- a/Documentation/usb/URB.txt +++ b/Documentation/usb/URB.txt @@ -195,13 +195,12 @@ by the completion handler. The handler is of the following type: - typedef void (*usb_complete_t)(struct urb *, struct pt_regs *) + typedef void (*usb_complete_t)(struct urb *) -I.e., it gets the URB that caused the completion call, plus the -register values at the time of the corresponding interrupt (if any). -In the completion handler, you should have a look at urb->status to -detect any USB errors. Since the context parameter is included in the URB, -you can pass information to the completion handler. +I.e., it gets the URB that caused the completion call. In the completion +handler, you should have a look at urb->status to detect any USB errors. +Since the context parameter is included in the URB, you can pass +information to the completion handler. Note that even when an error (or unlink) is reported, data may have been transferred. That's because USB transfers are packetized; it might take @@ -210,12 +209,12 @@ have transferred successfully before the completion was called. NOTE: ***** WARNING ***** -NEVER SLEEP IN A COMPLETION HANDLER. These are normally called -during hardware interrupt processing. If you can, defer substantial -work to a tasklet (bottom half) to keep system latencies low. You'll -probably need to use spinlocks to protect data structures you manipulate -in completion handlers. +NEVER SLEEP IN A COMPLETION HANDLER. These are often called in atomic +context. +In the current kernel, completion handlers run with local interrupts +disabled, but in the future this will be changed, so don't assume that +local IRQs are always disabled inside completion handlers. 1.8. How to do isochronous (ISO) transfers? diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt index c9c3f0f5ad7bfa7b81aa21342b2f1afa4638eebf..98be91982677e89bef390162440c0a90a479eb46 100644 --- a/Documentation/usb/proc_usb_info.txt +++ b/Documentation/usb/proc_usb_info.txt @@ -54,9 +54,12 @@ it and 002/048 sometime later. These files can be read as binary data. The binary data consists of first the device descriptor, then the descriptors for each -configuration of the device. Multi-byte fields in the device and -configuration descriptors, but not other descriptors, are converted -to host endianness by the kernel. This information is also shown +configuration of the device. Multi-byte fields in the device descriptor +are converted to host endianness by the kernel. The configuration +descriptors are in bus endian format! The configuration descriptor +are wTotalLength bytes apart. If a device returns less configuration +descriptor data than indicated by wTotalLength there will be a hole in +the file for the missing bytes. This information is also shown in text form by the /proc/bus/usb/devices file, described later. These files may also be used to write user-level drivers for the USB diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt index 676f87366025a57a7158b2e04de9605883a5a124..06cf3ac83631cc760de1ddd75776644314293eac 100644 --- a/Documentation/video4linux/v4l2-controls.txt +++ b/Documentation/video4linux/v4l2-controls.txt @@ -124,26 +124,27 @@ You add non-menu controls by calling v4l2_ctrl_new_std: const struct v4l2_ctrl_ops *ops, u32 id, s32 min, s32 max, u32 step, s32 def); -Menu controls are added by calling v4l2_ctrl_new_std_menu: +Menu and integer menu controls are added by calling v4l2_ctrl_new_std_menu: struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl, const struct v4l2_ctrl_ops *ops, u32 id, s32 max, s32 skip_mask, s32 def); -Or alternatively for integer menu controls, by calling v4l2_ctrl_new_int_menu: +Menu controls with a driver specific menu are added by calling +v4l2_ctrl_new_std_menu_items: + + struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items( + struct v4l2_ctrl_handler *hdl, + const struct v4l2_ctrl_ops *ops, u32 id, s32 max, + s32 skip_mask, s32 def, const char * const *qmenu); + +Integer menu controls with a driver specific menu can be added by calling +v4l2_ctrl_new_int_menu: struct v4l2_ctrl *v4l2_ctrl_new_int_menu(struct v4l2_ctrl_handler *hdl, const struct v4l2_ctrl_ops *ops, u32 id, s32 max, s32 def, const s64 *qmenu_int); -Standard menu controls with a driver specific menu are added by calling -v4l2_ctrl_new_std_menu_items: - - struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items( - struct v4l2_ctrl_handler *hdl, - const struct v4l2_ctrl_ops *ops, u32 id, s32 max, - s32 skip_mask, s32 def, const char * const *qmenu); - These functions are typically called right after the v4l2_ctrl_handler_init: static const s64 exp_bias_qmenu[] = { diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index ef925eaa14608fc806c9a58fd032d9aeaeea6305..858aecf21db2c9d449d984af406a838ed5143ed4 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -53,7 +53,7 @@ incompatible change are allowed. However, there is an extension facility that allows backward-compatible extensions to the API to be queried and used. -The extension mechanism is not based on on the Linux version number. +The extension mechanism is not based on the Linux version number. Instead, kvm defines extension identifiers and a facility to query whether a particular extension identifier is available. If it is, a set of ioctls is available for application use. diff --git a/Documentation/virtual/kvm/cpuid.txt b/Documentation/virtual/kvm/cpuid.txt index 83afe65d4966d0664186e2163083510da5aba012..22ff659bc0fb644704933e50cb931d0e2681232b 100644 --- a/Documentation/virtual/kvm/cpuid.txt +++ b/Documentation/virtual/kvm/cpuid.txt @@ -43,6 +43,10 @@ KVM_FEATURE_CLOCKSOURCE2 || 3 || kvmclock available at msrs KVM_FEATURE_ASYNC_PF || 4 || async pf can be enabled by || || writing to msr 0x4b564d02 ------------------------------------------------------------------------------ +KVM_FEATURE_PV_UNHALT || 7 || guest checks this feature bit + || || before enabling paravirtualized + || || spinlock support. +------------------------------------------------------------------------------ KVM_FEATURE_CLOCKSOURCE_STABLE_BIT || 24 || host will warn if no guest-side || || per-cpu warps are expected in || || kvmclock. diff --git a/Documentation/virtual/kvm/hypercalls.txt b/Documentation/virtual/kvm/hypercalls.txt index ea113b5d87a4a8530fcc32f57a4da78c6e9e7281..022198e389d7e6066b8101292199fa25bcde84e4 100644 --- a/Documentation/virtual/kvm/hypercalls.txt +++ b/Documentation/virtual/kvm/hypercalls.txt @@ -64,3 +64,17 @@ Purpose: To enable communication between the hypervisor and guest there is a shared page that contains parts of supervisor visible register state. The guest can map this shared page to access its supervisor register through memory using this hypercall. + +5. KVM_HC_KICK_CPU +------------------------ +Architecture: x86 +Status: active +Purpose: Hypercall used to wakeup a vcpu from HLT state +Usage example : A vcpu of a paravirtualized guest that is busywaiting in guest +kernel mode for an event to occur (ex: a spinlock to become available) can +execute HLT instruction once it has busy-waited for more than a threshold +time-interval. Execution of HLT instruction would cause the hypervisor to put +the vcpu to sleep until occurence of an appropriate event. Another vcpu of the +same guest can wakeup the sleeping vcpu by issuing KVM_HC_KICK_CPU hypercall, +specifying APIC ID (a1) of the vcpu to be woken up. An additional argument (a0) +is used in the hypercall for future use. diff --git a/Documentation/workqueue.txt b/Documentation/workqueue.txt index a6ab4b62d9261cc9b7690076019fe3bec04a79b4..f81a65b54c29e6f8d853e621fddd530eebf842a1 100644 --- a/Documentation/workqueue.txt +++ b/Documentation/workqueue.txt @@ -85,32 +85,31 @@ workqueue. Special purpose threads, called worker threads, execute the functions off of the queue, one after the other. If no work is queued, the worker threads become idle. These worker threads are managed in so -called thread-pools. +called worker-pools. The cmwq design differentiates between the user-facing workqueues that subsystems and drivers queue work items on and the backend mechanism -which manages thread-pools and processes the queued work items. +which manages worker-pools and processes the queued work items. -The backend is called gcwq. There is one gcwq for each possible CPU -and one gcwq to serve work items queued on unbound workqueues. Each -gcwq has two thread-pools - one for normal work items and the other -for high priority ones. +There are two worker-pools, one for normal work items and the other +for high priority ones, for each possible CPU and some extra +worker-pools to serve work items queued on unbound workqueues - the +number of these backing pools is dynamic. Subsystems and drivers can create and queue work items through special workqueue API functions as they see fit. They can influence some aspects of the way the work items are executed by setting flags on the workqueue they are putting the work item on. These flags include -things like CPU locality, reentrancy, concurrency limits, priority and -more. To get a detailed overview refer to the API description of +things like CPU locality, concurrency limits, priority and more. To +get a detailed overview refer to the API description of alloc_workqueue() below. -When a work item is queued to a workqueue, the target gcwq and -thread-pool is determined according to the queue parameters and -workqueue attributes and appended on the shared worklist of the -thread-pool. For example, unless specifically overridden, a work item -of a bound workqueue will be queued on the worklist of either normal -or highpri thread-pool of the gcwq that is associated to the CPU the -issuer is running on. +When a work item is queued to a workqueue, the target worker-pool is +determined according to the queue parameters and workqueue attributes +and appended on the shared worklist of the worker-pool. For example, +unless specifically overridden, a work item of a bound workqueue will +be queued on the worklist of either normal or highpri worker-pool that +is associated to the CPU the issuer is running on. For any worker pool implementation, managing the concurrency level (how many execution contexts are active) is an important issue. cmwq @@ -118,14 +117,14 @@ tries to keep the concurrency at a minimal but sufficient level. Minimal to save resources and sufficient in that the system is used at its full capacity. -Each thread-pool bound to an actual CPU implements concurrency -management by hooking into the scheduler. The thread-pool is notified +Each worker-pool bound to an actual CPU implements concurrency +management by hooking into the scheduler. The worker-pool is notified whenever an active worker wakes up or sleeps and keeps track of the number of the currently runnable workers. Generally, work items are not expected to hog a CPU and consume many cycles. That means maintaining just enough concurrency to prevent work processing from stalling should be optimal. As long as there are one or more runnable -workers on the CPU, the thread-pool doesn't start execution of a new +workers on the CPU, the worker-pool doesn't start execution of a new work, but, when the last running worker goes to sleep, it immediately schedules a new worker so that the CPU doesn't sit idle while there are pending work items. This allows using a minimal number of workers @@ -135,19 +134,20 @@ Keeping idle workers around doesn't cost other than the memory space for kthreads, so cmwq holds onto idle ones for a while before killing them. -For an unbound wq, the above concurrency management doesn't apply and -the thread-pools for the pseudo unbound CPU try to start executing all -work items as soon as possible. The responsibility of regulating -concurrency level is on the users. There is also a flag to mark a -bound wq to ignore the concurrency management. Please refer to the -API section for details. +For unbound workqueues, the number of backing pools is dynamic. +Unbound workqueue can be assigned custom attributes using +apply_workqueue_attrs() and workqueue will automatically create +backing worker pools matching the attributes. The responsibility of +regulating concurrency level is on the users. There is also a flag to +mark a bound wq to ignore the concurrency management. Please refer to +the API section for details. Forward progress guarantee relies on that workers can be created when more execution contexts are necessary, which in turn is guaranteed through the use of rescue workers. All work items which might be used on code paths that handle memory reclaim are required to be queued on wq's that have a rescue-worker reserved for execution under memory -pressure. Else it is possible that the thread-pool deadlocks waiting +pressure. Else it is possible that the worker-pool deadlocks waiting for execution contexts to free up. @@ -166,25 +166,15 @@ resources, scheduled and executed. @flags: - WQ_NON_REENTRANT - - By default, a wq guarantees non-reentrance only on the same - CPU. A work item may not be executed concurrently on the same - CPU by multiple workers but is allowed to be executed - concurrently on multiple CPUs. This flag makes sure - non-reentrance is enforced across all CPUs. Work items queued - to a non-reentrant wq are guaranteed to be executed by at most - one worker system-wide at any given time. - WQ_UNBOUND - Work items queued to an unbound wq are served by a special - gcwq which hosts workers which are not bound to any specific - CPU. This makes the wq behave as a simple execution context - provider without concurrency management. The unbound gcwq - tries to start execution of work items as soon as possible. - Unbound wq sacrifices locality but is useful for the following - cases. + Work items queued to an unbound wq are served by the special + woker-pools which host workers which are not bound to any + specific CPU. This makes the wq behave as a simple execution + context provider without concurrency management. The unbound + worker-pools try to start execution of work items as soon as + possible. Unbound wq sacrifices locality but is useful for + the following cases. * Wide fluctuation in the concurrency level requirement is expected and using bound wq may end up creating large number @@ -209,10 +199,10 @@ resources, scheduled and executed. WQ_HIGHPRI Work items of a highpri wq are queued to the highpri - thread-pool of the target gcwq. Highpri thread-pools are + worker-pool of the target cpu. Highpri worker-pools are served by worker threads with elevated nice level. - Note that normal and highpri thread-pools don't interact with + Note that normal and highpri worker-pools don't interact with each other. Each maintain its separate pool of workers and implements concurrency management among its workers. @@ -221,7 +211,7 @@ resources, scheduled and executed. Work items of a CPU intensive wq do not contribute to the concurrency level. In other words, runnable CPU intensive work items will not prevent other work items in the same - thread-pool from starting execution. This is useful for bound + worker-pool from starting execution. This is useful for bound work items which are expected to hog CPU cycles so that their execution is regulated by the system scheduler. @@ -233,6 +223,10 @@ resources, scheduled and executed. This flag is meaningless for unbound wq. +Note that the flag WQ_NON_REENTRANT no longer exists as all workqueues +are now non-reentrant - any work item is guaranteed to be executed by +at most one worker system-wide at any given time. + @max_active: @max_active determines the maximum number of execution contexts per @@ -254,9 +248,9 @@ recommended. Some users depend on the strict execution ordering of ST wq. The combination of @max_active of 1 and WQ_UNBOUND is used to achieve this -behavior. Work items on such wq are always queued to the unbound gcwq -and only one work item can be active at any given time thus achieving -the same ordering property as ST wq. +behavior. Work items on such wq are always queued to the unbound +worker-pools and only one work item can be active at any given time thus +achieving the same ordering property as ST wq. 5. Example Execution Scenarios diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index fc66d42422eef8ba30d52b0a49fae515fd46625b..f4f268c2b826de7f03b1c2bd2478a85eacd58f2e 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -58,7 +58,7 @@ Protocol 2.11: (Kernel 3.6) Added a field for offset of EFI handover protocol entry point. Protocol 2.12: (Kernel 3.8) Added the xloadflags field and extension fields - to struct boot_params for for loading bzImage and ramdisk + to struct boot_params for loading bzImage and ramdisk above 4G in 64bit. **** MEMORY LAYOUT diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index e9e8ddbbf376253bd093db46d1695dccd9e06f1e..1228b22e142b2c5da2f749cb7922b357209c01a0 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -176,6 +176,11 @@ ACPI acpi=noirq Don't route interrupts + acpi=nocmcff Disable firmware first mode for corrected errors. This + disables parsing the HEST CMC error source to check if + firmware has set the FF flag. This may result in + duplicate corrected error reports. + PCI pci=off Don't use PCI diff --git a/Documentation/zh_CN/SubmittingPatches b/Documentation/zh_CN/SubmittingPatches index 0f4385a62a496c7157eb7359bf5494aed3c53301..be0bd47250629761870945f32e5f4bcee5ccf9c1 100644 --- a/Documentation/zh_CN/SubmittingPatches +++ b/Documentation/zh_CN/SubmittingPatches @@ -146,7 +146,7 @@ Majordomo lists of VGER.KERNEL.ORG at: 如果改动影å“了用户空间和内核之间的接å£ï¼Œè¯·ç»™ MAN-PAGES 的维护者（列在 -MAITAINERS 文件里的）å‘é€ä¸€ä¸ªæ‰‹å†Œé¡µï¼ˆman-pages）补ä¸ï¼Œæˆ–者至少通知一下改 +MAINTAINERS 文件里的）å‘é€ä¸€ä¸ªæ‰‹å†Œé¡µï¼ˆman-pages）补ä¸ï¼Œæˆ–者至少通知一下改 å˜ï¼Œè®©ä¸€äº›ä¿¡æ¯æœ‰é€”径进入手册页。 å³ä½¿åœ¨ç¬¬å››æ­¥çš„时候，维护者没有作出回应，也è¦ç¡®è®¤åœ¨ä¿®æ”¹ä»–们的代ç çš„时候 diff --git a/MAINTAINERS b/MAINTAINERS index 705bb96bc37ebaddfc8e8bcd856695bd85dfee86..b6b29c38b6b67d5c950188da793f35696e00e7be 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -580,12 +580,24 @@ L: linux-media@vger.kernel.org S: Maintained F: drivers/media/i2c/ad9389b* +ANALOG DEVICES INC ADV7511 DRIVER +M: Hans Verkuil +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/media/i2c/adv7511* + ANALOG DEVICES INC ADV7604 DRIVER M: Hans Verkuil L: linux-media@vger.kernel.org S: Maintained F: drivers/media/i2c/adv7604* +ANALOG DEVICES INC ADV7842 DRIVER +M: Hans Verkuil +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/media/i2c/adv7842* + ANALOG DEVICES INC ASOC CODEC DRIVERS M: Lars-Peter Clausen L: device-drivers-devel@blackfin.uclinux.org @@ -595,6 +607,7 @@ S: Supported F: sound/soc/codecs/adau* F: sound/soc/codecs/adav* F: sound/soc/codecs/ad1* +F: sound/soc/codecs/ad7* F: sound/soc/codecs/ssm* F: sound/soc/codecs/sigmadsp.* @@ -638,6 +651,12 @@ S: Maintained F: drivers/net/appletalk/ F: net/appletalk/ +APTINA CAMERA SENSOR PLL +M: Laurent Pinchart +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/media/i2c/aptina-pll.* + ARASAN COMPACT FLASH PATA CONTROLLER M: Viresh Kumar L: linux-ide@vger.kernel.org @@ -813,7 +832,7 @@ F: arch/arm/mach-prima2/ F: drivers/dma/sirf-dma.c F: drivers/i2c/busses/i2c-sirf.c F: drivers/mmc/host/sdhci-sirf.c -F: drivers/pinctrl/pinctrl-sirf.c +F: drivers/pinctrl/sirf/ F: drivers/spi/spi-sirf.c ARM/EBSA110 MACHINE SUPPORT @@ -1301,7 +1320,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-vt8500/ F: drivers/clocksource/vt8500_timer.c -F: drivers/gpio/gpio-vt8500.c F: drivers/i2c/busses/i2c-wmt.c F: drivers/mmc/host/wmt-sdmmc.c F: drivers/pwm/pwm-vt8500.c @@ -1547,6 +1565,13 @@ W: http://atmelwlandriver.sourceforge.net/ S: Maintained F: drivers/net/wireless/atmel* +ATTO EXPRESSSAS SAS/SATA RAID SCSI DRIVER +M: Bradley Grove +L: linux-scsi@vger.kernel.org +W: http://www.attotech.com +S: Supported +F: drivers/scsi/esas2r + AUDIT SUBSYSTEM M: Al Viro M: Eric Paris @@ -1823,6 +1848,12 @@ L: linux-scsi@vger.kernel.org S: Supported F: drivers/scsi/bnx2fc/ +BROADCOM BNX2I 1/10 GIGABIT iSCSI DRIVER +M: Eddie Wai +L: linux-scsi@vger.kernel.org +S: Supported +F: drivers/scsi/bnx2i/ + BROADCOM SPECIFIC AMBA DRIVER (BCMA) M: RafaÅ‚ MiÅ‚ecki L: linux-wireless@vger.kernel.org @@ -2076,7 +2107,8 @@ F: drivers/usb/chipidea/ CISCO VIC ETHERNET NIC DRIVER M: Christian Benvenuti -M: Roopa Prabhu +M: Sujith Sankar +M: Govindarajulu Varadarajan M: Neel Patel M: Nishank Trivedi S: Supported @@ -2112,6 +2144,13 @@ M: Russell King S: Maintained F: include/linux/clk.h +CLOCKSOURCE, CLOCKEVENT DRIVERS +M: Daniel Lezcano +M: Thomas Gleixner +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core +S: Supported +F: drivers/clocksource + CISCO FCOE HBA DRIVER M: Hiral Patel M: Suma Ramars @@ -2454,9 +2493,9 @@ S: Maintained F: drivers/media/common/cypress_firmware* CYTTSP TOUCHSCREEN DRIVER -M: Javier Martinez Canillas +M: Ferruh Yigit L: linux-input@vger.kernel.org -S: Maintained +S: Supported F: drivers/input/touchscreen/cyttsp* F: include/linux/input/cyttsp.h @@ -4101,6 +4140,13 @@ W: http://launchpad.net/ideapad-laptop S: Maintained F: drivers/platform/x86/ideapad-laptop.c +IDEAPAD LAPTOP SLIDEBAR DRIVER +M: Andrey Moiseev +L: linux-input@vger.kernel.org +W: https://github.com/o2genum/ideapad-slidebar +S: Maintained +F: drivers/input/misc/ideapad_slidebar.c + IDE/ATAPI DRIVERS M: Borislav Petkov L: linux-ide@vger.kernel.org @@ -5497,7 +5543,7 @@ L: platform-driver-x86@vger.kernel.org S: Supported F: drivers/platform/x86/msi-wmi.c -MT9M032 SENSOR DRIVER +MT9M032 APTINA SENSOR DRIVER M: Laurent Pinchart L: linux-media@vger.kernel.org T: git git://linuxtv.org/media_tree.git @@ -5505,7 +5551,7 @@ S: Maintained F: drivers/media/i2c/mt9m032.c F: include/media/mt9m032.h -MT9P031 SENSOR DRIVER +MT9P031 APTINA CAMERA SENSOR M: Laurent Pinchart L: linux-media@vger.kernel.org T: git git://linuxtv.org/media_tree.git @@ -5513,7 +5559,7 @@ S: Maintained F: drivers/media/i2c/mt9p031.c F: include/media/mt9p031.h -MT9T001 SENSOR DRIVER +MT9T001 APTINA CAMERA SENSOR M: Laurent Pinchart L: linux-media@vger.kernel.org T: git git://linuxtv.org/media_tree.git @@ -5521,7 +5567,7 @@ S: Maintained F: drivers/media/i2c/mt9t001.c F: include/media/mt9t001.h -MT9V032 SENSOR DRIVER +MT9V032 APTINA CAMERA SENSOR M: Laurent Pinchart L: linux-media@vger.kernel.org T: git git://linuxtv.org/media_tree.git @@ -6066,7 +6112,7 @@ M: Rob Herring M: Pawel Moll M: Mark Rutland M: Stephen Warren -M: Ian Campbell +M: Ian Campbell L: devicetree@vger.kernel.org S: Maintained F: Documentation/devicetree/ @@ -6275,6 +6321,13 @@ F: Documentation/PCI/ F: drivers/pci/ F: include/linux/pci* +PCI DRIVER FOR NVIDIA TEGRA +M: Thierry Reding +L: linux-tegra@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +F: drivers/pci/host/pci-tegra.c + PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: linux-pcmcia@lists.infradead.org @@ -6676,11 +6729,11 @@ F: Documentation/scsi/LICENSE.qla2xxx F: drivers/scsi/qla2xxx/ QLOGIC QLA4XXX iSCSI DRIVER -M: Ravi Anand M: Vikas Chaudhary M: iscsi-driver@qlogic.com L: linux-scsi@vger.kernel.org S: Supported +F: Documentation/scsi/LICENSE.qla4xxx F: drivers/scsi/qla4xxx/ QLOGIC QLA3XXX NETWORK DRIVER @@ -6921,6 +6974,14 @@ M: Maxim Levitsky S: Maintained F: drivers/memstick/host/r592.* +ROCCAT DRIVERS +M: Stefan Achatz +W: http://sourceforge.net/projects/roccat/ +S: Maintained +F: drivers/hid/hid-roccat* +F: include/linux/hid-roccat* +F: Documentation/ABI/*/sysfs-driver-hid-roccat* + ROCKETPORT DRIVER P: Comtrol Corp. W: http://www.comtrol.com @@ -7143,7 +7204,7 @@ S: Maintained F: include/linux/mmc/dw_mmc.h F: drivers/mmc/host/dw_mmc* -TIMEKEEPING, NTP +TIMEKEEPING, CLOCKSOURCE CORE, NTP M: John Stultz M: Thomas Gleixner T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core @@ -7156,7 +7217,6 @@ F: include/uapi/linux/timex.h F: kernel/time/clocksource.c F: kernel/time/time*.c F: kernel/time/ntp.c -F: drivers/clocksource TLG2300 VIDEO4LINUX-2 DRIVER M: Huang Shijie @@ -7676,6 +7736,17 @@ F: include/sound/ F: include/uapi/sound/ F: sound/ +SOUND - COMPRESSED AUDIO +M: Vinod Koul +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git +S: Supported +F: Documentation/sound/alsa/compress_offload.txt +F: include/sound/compress_driver.h +F: include/uapi/sound/compress_* +F: sound/core/compress_offload.c +F: sound/soc/soc-compress.c + SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC) M: Liam Girdwood M: Mark Brown @@ -7683,6 +7754,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git L: alsa-devel@alsa-project.org (moderated for non-subscribers) W: http://alsa-project.org/main/index.php/ASoC S: Supported +F: Documentation/sound/alsa/soc/ F: sound/soc/ F: include/sound/soc* @@ -7891,11 +7963,11 @@ S: Maintained F: drivers/staging/nvec/ STAGING - OLPC SECONDARY DISPLAY CONTROLLER (DCON) -M: Andres Salomon -M: Chris Ball +M: Jens Frederich +M: Daniel Drake M: Jon Nettleton W: http://wiki.laptop.org/go/DCON -S: Odd Fixes +S: Maintained F: drivers/staging/olpc_dcon/ STAGING - OZMO DEVICES USB OVER WIFI DRIVER @@ -8314,9 +8386,14 @@ M: Chris Metcalf W: http://www.tilera.com/scm/ S: Supported F: arch/tile/ -F: drivers/tty/hvc/hvc_tile.c -F: drivers/net/ethernet/tile/ +F: drivers/char/tile-srom.c F: drivers/edac/tile_edac.c +F: drivers/net/ethernet/tile/ +F: drivers/rtc/rtc-tile.c +F: drivers/tty/hvc/hvc_tile.c +F: drivers/tty/serial/tilegx.c +F: drivers/usb/host/*-tilegx.c +F: include/linux/usb/tilegx.h TLAN NETWORK DRIVER M: Samuel Chessman @@ -8810,7 +8887,6 @@ W: http://www.linux-usb.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git S: Supported F: Documentation/usb/ -F: drivers/net/usb/ F: drivers/usb/ F: include/linux/usb.h F: include/linux/usb/ @@ -9033,6 +9109,12 @@ F: drivers/staging/vme/ F: drivers/vme/ F: include/linux/vme* +VMWARE HYPERVISOR INTERFACE +M: Alok Kataria +L: virtualization@lists.linux-foundation.org +S: Supported +F: arch/x86/kernel/cpu/vmware.c + VMWARE VMXNET3 ETHERNET DRIVER M: Shreyas Bhatewara M: "VMware, Inc." @@ -9254,9 +9336,9 @@ F: drivers/media/tuners/tuner-xc2028.* XEN HYPERVISOR INTERFACE M: Konrad Rzeszutek Wilk -M: Jeremy Fitzhardinge -L: xen-devel@lists.xensource.com (moderated for non-subscribers) -L: virtualization@lists.linux-foundation.org +M: Boris Ostrovsky +M: David Vrabel +L: xen-devel@lists.xenproject.org (moderated for non-subscribers) S: Supported F: arch/x86/xen/ F: drivers/*/xen-*front.c @@ -9267,35 +9349,35 @@ F: include/uapi/xen/ XEN HYPERVISOR ARM M: Stefano Stabellini -L: xen-devel@lists.xensource.com (moderated for non-subscribers) +L: xen-devel@lists.xenproject.org (moderated for non-subscribers) S: Supported F: arch/arm/xen/ F: arch/arm/include/asm/xen/ XEN HYPERVISOR ARM64 M: Stefano Stabellini -L: xen-devel@lists.xensource.com (moderated for non-subscribers) +L: xen-devel@lists.xenproject.org (moderated for non-subscribers) S: Supported F: arch/arm64/xen/ F: arch/arm64/include/asm/xen/ XEN NETWORK BACKEND DRIVER M: Ian Campbell -L: xen-devel@lists.xensource.com (moderated for non-subscribers) +L: xen-devel@lists.xenproject.org (moderated for non-subscribers) L: netdev@vger.kernel.org S: Supported F: drivers/net/xen-netback/* XEN PCI SUBSYSTEM M: Konrad Rzeszutek Wilk -L: xen-devel@lists.xensource.com (moderated for non-subscribers) +L: xen-devel@lists.xenproject.org (moderated for non-subscribers) S: Supported F: arch/x86/pci/*xen* F: drivers/pci/*xen* XEN SWIOTLB SUBSYSTEM M: Konrad Rzeszutek Wilk -L: xen-devel@lists.xensource.com (moderated for non-subscribers) +L: xen-devel@lists.xenproject.org (moderated for non-subscribers) S: Supported F: arch/x86/xen/*swiotlb* F: drivers/xen/*swiotlb* diff --git a/Makefile b/Makefile index a5a55f4547c6e79fa17a0051dc5cce1daaec2a50..fe8204be566d3fbd23e847ceddd368df0f37450c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 11 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = NAME = Linux for Workgroups # *DOCUMENTATION* diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c index b8ce18f485d3ecce23d9903138eeb930ab62cb4d..310a4ce1dccc0a1da774bcc89acee06b1d018857 100644 --- a/arch/alpha/oprofile/common.c +++ b/arch/alpha/oprofile/common.c @@ -106,7 +106,7 @@ op_axp_stop(void) } static int -op_axp_create_files(struct super_block *sb, struct dentry *root) +op_axp_create_files(struct dentry *root) { int i; @@ -115,23 +115,23 @@ op_axp_create_files(struct super_block *sb, struct dentry *root) char buf[4]; snprintf(buf, sizeof buf, "%d", i); - dir = oprofilefs_mkdir(sb, root, buf); + dir = oprofilefs_mkdir(root, buf); - oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); - oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); - oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); + oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled); + oprofilefs_create_ulong(dir, "event", &ctr[i].event); + oprofilefs_create_ulong(dir, "count", &ctr[i].count); /* Dummies. */ - oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); - oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); - oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask); + oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel); + oprofilefs_create_ulong(dir, "user", &ctr[i].user); + oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask); } if (model->can_set_proc_mode) { - oprofilefs_create_ulong(sb, root, "enable_pal", + oprofilefs_create_ulong(root, "enable_pal", &sys.enable_pal); - oprofilefs_create_ulong(sb, root, "enable_kernel", + oprofilefs_create_ulong(root, "enable_kernel", &sys.enable_kernel); - oprofilefs_create_ulong(sb, root, "enable_user", + oprofilefs_create_ulong(root, "enable_user", &sys.enable_user); } diff --git a/arch/arc/lib/strchr-700.S b/arch/arc/lib/strchr-700.S index 99c10475d477c73957353e5e9df751718289b5ac..9c548c7cf0014e1ce9c0823026039d60365b6192 100644 --- a/arch/arc/lib/strchr-700.S +++ b/arch/arc/lib/strchr-700.S @@ -39,9 +39,18 @@ ARC_ENTRY strchr ld.a r2,[r0,4] sub r12,r6,r7 bic r12,r12,r6 +#ifdef __LITTLE_ENDIAN__ and r7,r12,r4 breq r7,0,.Loop ; For speed, we want this branch to be unaligned. b .Lfound_char ; Likewise this one. +#else + and r12,r12,r4 + breq r12,0,.Loop ; For speed, we want this branch to be unaligned. + lsr_s r12,r12,7 + bic r2,r7,r6 + b.d .Lfound_char_b + and_s r2,r2,r12 +#endif ; /* We require this code address to be unaligned for speed... */ .Laligned: ld_s r2,[r0] @@ -95,6 +104,7 @@ ARC_ENTRY strchr lsr r7,r7,7 bic r2,r7,r6 +.Lfound_char_b: norm r2,r2 sub_s r0,r0,4 asr_s r2,r2,3 diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 43594d5116efce810798b763da8f3e7ea6891c93..a00f4c1c7d71795dace4130a4f353edccda7ceef 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -52,6 +52,7 @@ config ARM select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 + select IRQ_FORCED_THREADING select KTIME_SCALAR select PERF_USE_VMALLOC select RTC_LIB @@ -441,7 +442,6 @@ config ARCH_NETX config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU - select ARCH_SUPPORTS_MSI select CPU_XSC3 select NEED_MACH_MEMORY_H select NEED_RET_TO_USER @@ -630,6 +630,7 @@ config ARCH_MSM bool "Qualcomm MSM" select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select CLKSRC_OF if OF select COMMON_CLK select GENERIC_CLOCKEVENTS help @@ -645,7 +646,7 @@ config ARCH_SHMOBILE select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_ARM_TWD if SMP select HAVE_CLK select HAVE_MACH_CLKDEV select HAVE_SMP @@ -700,7 +701,7 @@ config ARCH_S3C24XX select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP - select CLKSRC_MMIO + select CLKSRC_SAMSUNG_PWM select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG select HAVE_CLK @@ -723,7 +724,7 @@ config ARCH_S3C64XX select ARCH_REQUIRE_GPIOLIB select ARM_VIC select CLKDEV_LOOKUP - select CLKSRC_MMIO + select CLKSRC_SAMSUNG_PWM select CPU_V6 select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG @@ -739,7 +740,6 @@ config ARCH_S3C64XX select SAMSUNG_ATAGS select SAMSUNG_CLKSRC select SAMSUNG_GPIOLIB_4BIT - select SAMSUNG_IRQ_VIC_TIMER select SAMSUNG_WDT_RESET select USB_ARCH_HAS_OHCI help @@ -748,7 +748,7 @@ config ARCH_S3C64XX config ARCH_S5P64X0 bool "Samsung S5P6440 S5P6450" select CLKDEV_LOOKUP - select CLKSRC_MMIO + select CLKSRC_SAMSUNG_PWM select CPU_V6 select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG @@ -767,7 +767,7 @@ config ARCH_S5PC100 bool "Samsung S5PC100" select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP - select CLKSRC_MMIO + select CLKSRC_SAMSUNG_PWM select CPU_V7 select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG @@ -787,7 +787,7 @@ config ARCH_S5PV210 select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SPARSEMEM_ENABLE select CLKDEV_LOOKUP - select CLKSRC_MMIO + select CLKSRC_SAMSUNG_PWM select CPU_V7 select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG @@ -1372,6 +1372,15 @@ config ARM_ERRATA_798181 which sends an IPI to the CPUs that are running the same ASID as the one being invalidated. +config ARM_ERRATA_773022 + bool "ARM errata: incorrect instructions may be executed from loop buffer" + depends on CPU_V7 + help + This option enables the workaround for the 773022 Cortex-A15 + (up to r0p4) erratum. In certain rare sequences of code, the + loop buffer may deliver incorrect instructions. This + workaround disables the loop buffer to avoid the erratum. + endmenu source "arch/arm/common/Kconfig" @@ -1584,23 +1593,13 @@ config ARM_PSCI 0022A ("Power State Coordination Interface System Software on ARM processors"). -config LOCAL_TIMERS - bool "Use local timer interrupts" - depends on SMP - default y - help - Enable support for local timers on SMP platforms, rather then the - legacy IPI broadcast method. Local timers allows the system - accounting to be spread across the timer interval, preventing a - "thundering herd" at every timer tick. - # The GPIO number here must be sorted by descending number. In case of # a multiplatform kernel, we just want the highest value required by the # selected platforms. config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 + default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX default 392 if ARCH_U8500 default 352 if ARCH_VT8500 default 288 if ARCH_SUNXI @@ -1613,13 +1612,49 @@ config ARCH_NR_GPIO source kernel/Kconfig.preempt -config HZ +config HZ_FIXED int default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \ ARCH_S5PV210 || ARCH_EXYNOS4 default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE - default 100 + +choice + depends on !HZ_FIXED + prompt "Timer frequency" + +config HZ_100 + bool "100 Hz" + +config HZ_200 + bool "200 Hz" + +config HZ_250 + bool "250 Hz" + +config HZ_300 + bool "300 Hz" + +config HZ_500 + bool "500 Hz" + +config HZ_1000 + bool "1000 Hz" + +endchoice + +config HZ + int + default HZ_FIXED if HZ_FIXED + default 100 if HZ_100 + default 200 if HZ_200 + default 250 if HZ_250 + default 300 if HZ_300 + default 500 if HZ_500 + default 1000 + +config SCHED_HRTICK + def_bool HIGH_RES_TIMERS config SCHED_HRTICK def_bool HIGH_RES_TIMERS @@ -1756,6 +1791,9 @@ config HAVE_ARCH_TRANSPARENT_HUGEPAGE def_bool y depends on ARM_LPAE +config ARCH_WANT_GENERAL_HUGETLB + def_bool y + source "mm/Kconfig" config FORCE_MAX_ZONEORDER @@ -2064,8 +2102,7 @@ config KEXEC It is an ongoing process to be certain the hardware in a machine is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. + initially work for you. config ATAGS_PROC bool "Export atags in procfs" @@ -2175,6 +2212,13 @@ config NEON Say Y to include support code for NEON, the ARMv7 Advanced SIMD Extension. +config KERNEL_MODE_NEON + bool "Support for NEON in kernel mode" + default n + depends on NEON + help + Say Y to include support for NEON in kernel mode. + endmenu menu "Userspace binary formats" @@ -2199,7 +2243,7 @@ source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE depends on !ARCH_S5PC100 - depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ + depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \ CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK def_bool y diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 583f4a00ec3210bf6cb3cf58dac4ae7ac8a2807c..9762c84b419845f05ee6a7d1f9f95084dde310b5 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -92,6 +92,7 @@ choice config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" depends on ARCH_BCM2835 + select DEBUG_UART_PL01X config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" @@ -110,6 +111,7 @@ choice config DEBUG_CNS3XXX bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" depends on ARCH_CNS3XXX + select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the CNS3xxx UART0. @@ -117,6 +119,7 @@ choice config DEBUG_DAVINCI_DA8XX_UART1 bool "Kernel low-level debugging on DaVinci DA8XX using UART1" depends on ARCH_DAVINCI_DA8XX + select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to UART1 serial port on DaVinci DA8XX devices. @@ -124,6 +127,7 @@ choice config DEBUG_DAVINCI_DA8XX_UART2 bool "Kernel low-level debugging on DaVinci DA8XX using UART2" depends on ARCH_DAVINCI_DA8XX + select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to UART2 serial port on DaVinci DA8XX devices. @@ -131,6 +135,7 @@ choice config DEBUG_DAVINCI_DMx_UART0 bool "Kernel low-level debugging on DaVinci DMx using UART0" depends on ARCH_DAVINCI_DMx + select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to UART0 serial port on DaVinci DMx devices. @@ -138,6 +143,7 @@ choice config DEBUG_DAVINCI_TNETV107X_UART1 bool "Kernel low-level debugging on DaVinci TNETV107x using UART1" depends on ARCH_DAVINCI_TNETV107X + select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to UART1 serial port on DaVinci TNETV107X @@ -174,9 +180,26 @@ choice Say Y here if you want the debug print routines to direct their output to the 8250 at PCI COM1. + config DEBUG_HI3620_UART + bool "Hisilicon HI3620 Debug UART" + depends on ARCH_HI3xxx + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on HI3620 UART. + + config DEBUG_HI3716_UART + bool "Hisilicon Hi3716 Debug UART" + depends on ARCH_HI3xxx + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on HI3716 UART. + config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK + select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the UART on Highbank based devices. @@ -191,6 +214,7 @@ choice config DEBUG_IMX23_UART bool "i.MX23 Debug UART" depends on SOC_IMX23 + select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support on i.MX23. @@ -212,6 +236,7 @@ choice config DEBUG_IMX28_UART bool "i.MX28 Debug UART" depends on SOC_IMX28 + select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support on i.MX28. @@ -261,6 +286,7 @@ choice config DEBUG_KEYSTONE_UART0 bool "Kernel low-level debugging on KEYSTONE2 using UART0" depends on ARCH_KEYSTONE + select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to UART0 serial port on KEYSTONE2 devices. @@ -268,6 +294,7 @@ choice config DEBUG_KEYSTONE_UART1 bool "Kernel low-level debugging on KEYSTONE2 using UART1" depends on ARCH_KEYSTONE + select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to UART1 serial port on KEYSTONE2 devices. @@ -275,6 +302,7 @@ choice config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" depends on ARCH_MMP + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on MMP UART2. @@ -282,6 +310,7 @@ choice config DEBUG_MMP_UART3 bool "Kernel low-level debugging message via MMP UART3" depends on ARCH_MMP + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on MMP UART3. @@ -326,6 +355,7 @@ choice config DEBUG_MVEBU_UART bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" depends on ARCH_MVEBU + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on MVEBU based platforms. @@ -344,6 +374,7 @@ choice config DEBUG_MVEBU_UART_ALTERNATE bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)" depends on ARCH_MVEBU + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on MVEBU based platforms. @@ -358,6 +389,7 @@ choice config DEBUG_NOMADIK_UART bool "Kernel low-level debugging messages via NOMADIK UART" depends on ARCH_NOMADIK + select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support on NOMADIK based platforms. @@ -365,6 +397,7 @@ choice config DEBUG_NSPIRE_CLASSIC_UART bool "Kernel low-level debugging via TI-NSPIRE 8250 UART" depends on ARCH_NSPIRE + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on TI-NSPIRE classic models. @@ -372,20 +405,82 @@ choice config DEBUG_NSPIRE_CX_UART bool "Kernel low-level debugging via TI-NSPIRE PL011 UART" depends on ARCH_NSPIRE + select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support on TI-NSPIRE CX models. - config DEBUG_OMAP2PLUS_UART - bool "Kernel low-level debugging messages via OMAP2PLUS UART" + config DEBUG_OMAP2UART1 + bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART help - Say Y here if you want kernel low-level debugging support - on OMAP2PLUS based platforms. + This covers at least h4, 2430sdp, 3430sdp, 3630sdp, + omap3 torpedo and 3530 lv som. + + config DEBUG_OMAP2UART2 + bool "Kernel low-level debugging messages via OMAP2/3/4 UART2" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_OMAP2UART3 + bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_OMAP3UART3 + bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + help + This covers at least cm_t3x, beagle, crane, devkit8000, + igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, + and 3517evm. + + config DEBUG_OMAP4UART3 + bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_OMAP3UART4 + bool "Kernel low-level debugging messages via OMAP36XX UART4" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_OMAP4UART4 + bool "Kernel low-level debugging messages via OMAP4/5 UART4" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_TI81XXUART1 + bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_TI81XXUART2 + bool "Kernel low-level debugging messages via TI81XX UART2" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_TI81XXUART3 + bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_AM33XXUART1 + bool "Kernel low-level debugging messages via AM33XX UART1" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART + + config DEBUG_ZOOM_UART + bool "Kernel low-level debugging messages via Zoom2/3 UART" + depends on ARCH_OMAP2PLUS + select DEBUG_OMAP2PLUS_UART config DEBUG_PICOXCELL_UART depends on ARCH_PICOXCELL bool "Use PicoXcell UART for low-level debug" + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on PicoXcell based platforms. @@ -393,6 +488,7 @@ choice config DEBUG_PXA_UART1 depends on ARCH_PXA bool "Use PXA UART1 for low-level debug" + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on PXA UART1. @@ -400,6 +496,7 @@ choice config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" depends on ARCH_REALVIEW + select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the serial port on RealView EB, PB11MP, PBA8 @@ -408,14 +505,64 @@ choice config DEBUG_REALVIEW_PB1176_PORT bool "RealView PB1176 UART" depends on MACH_REALVIEW_PB1176 + select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the standard serial port on the RealView PB1176 platform. - config DEBUG_ROCKCHIP_UART - bool "Kernel low-level debugging messages via Rockchip UART" + config DEBUG_RK29_UART0 + bool "Kernel low-level debugging messages via Rockchip RK29 UART0" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip based platforms. + + config DEBUG_RK29_UART1 + bool "Kernel low-level debugging messages via Rockchip RK29 UART1" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip based platforms. + + config DEBUG_RK29_UART2 + bool "Kernel low-level debugging messages via Rockchip RK29 UART2" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip based platforms. + + config DEBUG_RK3X_UART0 + bool "Kernel low-level debugging messages via Rockchip RK3X UART0" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip based platforms. + + config DEBUG_RK3X_UART1 + bool "Kernel low-level debugging messages via Rockchip RK3X UART1" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip based platforms. + + config DEBUG_RK3X_UART2 + bool "Kernel low-level debugging messages via Rockchip RK3X UART2" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip based platforms. + + config DEBUG_RK3X_UART3 + bool "Kernel low-level debugging messages via Rockchip RK3X UART3" depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Rockchip based platforms. @@ -471,6 +618,7 @@ choice config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on SOCFPGA based platforms. @@ -478,6 +626,7 @@ choice config DEBUG_SUNXI_UART0 bool "Kernel low-level debugging messages via sunXi UART0" depends on ARCH_SUNXI + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Allwinner A1X based platforms on the UART0. @@ -485,13 +634,59 @@ choice config DEBUG_SUNXI_UART1 bool "Kernel low-level debugging messages via sunXi UART1" depends on ARCH_SUNXI + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Allwinner A1X based platforms on the UART1. - config DEBUG_TEGRA_UART + config TEGRA_DEBUG_UART_AUTO_ODMDATA + bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Automatically determines which UART to use for low-level + debug based on the ODMDATA value. This value is part of + the BCT, and is written to the boot memory device using + nvflash, or other flashing tool. When bits 19:18 are 3, + then bits 17:15 indicate which UART to use; 0/1/2/3/4 + are UART A/B/C/D/E. + + config TEGRA_DEBUG_UARTA + bool "Kernel low-level debugging messages via Tegra UART A" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + + config TEGRA_DEBUG_UARTB + bool "Kernel low-level debugging messages via Tegra UART B" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + + config TEGRA_DEBUG_UARTC + bool "Kernel low-level debugging messages via Tegra UART C" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + + config TEGRA_DEBUG_UARTD + bool "Kernel low-level debugging messages via Tegra UART D" + depends on ARCH_TEGRA + select DEBUG_TEGRA_UART + help + Say Y here if you want kernel low-level debugging support + on Tegra based platforms. + + config TEGRA_DEBUG_UARTE + bool "Kernel low-level debugging messages via Tegra UART E" depends on ARCH_TEGRA - bool "Use Tegra UART for low-level debug" + select DEBUG_TEGRA_UART help Say Y here if you want kernel low-level debugging support on Tegra based platforms. @@ -510,19 +705,32 @@ choice Say Y here if you want the debug print routines to direct their output to the uart1 port on SiRFmarco devices. - config DEBUG_STI_UART + config STIH41X_DEBUG_ASC2 + bool "Use StiH415/416 ASC2 UART for low-level debug" + depends on ARCH_STI + select DEBUG_STI_UART + help + Say Y here if you want kernel low-level debugging support + on STiH415/416 based platforms like b2000, which has + default UART wired up to ASC2. + + If unsure, say N. + + config STIH41X_DEBUG_SBC_ASC1 + bool "Use StiH415/416 SBC ASC1 UART for low-level debug" depends on ARCH_STI - bool "Use StiH415/416 ASC for low-level debug" + select DEBUG_STI_UART help Say Y here if you want kernel low-level debugging support - on StiH415/416 based platforms like B2000, B2020. - It support UART2 and SBC_UART1. + on STiH415/416 based platforms like b2020. which has + default UART wired up to SBC ASC1. If unsure, say N. config DEBUG_U300_UART bool "Kernel low-level debugging messages via U300 UART0" depends on ARCH_U300 + select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the uart port on U300 devices. @@ -548,6 +756,7 @@ choice config DEBUG_VEXPRESS_UART0_CA9 bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)" depends on ARCH_VEXPRESS + select DEBUG_UART_PL01X help This option selects UART0 at 0x10009000. Except for custom models, this applies only to the V2P-CA9 tile. @@ -555,6 +764,7 @@ choice config DEBUG_VEXPRESS_UART0_RS1 bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)" depends on ARCH_VEXPRESS + select DEBUG_UART_PL01X help This option selects UART0 at 0x1c090000. This applies to most of the tiles using the RS1 memory map, including all new A-class @@ -563,6 +773,7 @@ choice config DEBUG_VEXPRESS_UART0_CRX bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)" depends on ARCH_VEXPRESS && !MMU + select DEBUG_UART_PL01X help This option selects UART0 at 0xb0090000. This is appropriate for Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7 @@ -579,7 +790,7 @@ choice depends on !ARCH_MULTIPLATFORM help Say Y here if your platform doesn't provide a UART option - below. This relies on your platform choosing the right UART + above. This relies on your platform choosing the right UART definition internally in order for low-level debugging to work. @@ -610,11 +821,41 @@ choice For more details about semihosting, please see chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. + config DEBUG_LL_UART_8250 + bool "Kernel low-level debugging via 8250 UART" + help + Say Y here if you wish the debug print routes to direct + their output to an 8250 UART. You can use this option + to provide the parameters for the 8250 UART rather than + selecting one of the platform specific options above if + you know the parameters for the port. + + This option is preferred over the platform specific + options; the platform specific options are deprecated + and will be soon removed. + + config DEBUG_LL_UART_PL01X + bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART" + help + Say Y here if you wish the debug print routes to direct + their output to a PL01x Primecell UART. You can use + this option to provide the parameters for the UART + rather than selecting one of the platform specific + options above if you know the parameters for the port. + + This option is preferred over the platform specific + options; the platform specific options are deprecated + and will be soon removed. + endchoice config DEBUG_EXYNOS_UART bool +config DEBUG_OMAP2PLUS_UART + bool + depends on ARCH_OMAP2PLUS + config DEBUG_IMX_UART_PORT int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ @@ -631,140 +872,19 @@ config DEBUG_IMX_UART_PORT Choose UART port on which kernel low-level debug messages should be output. -choice - prompt "Low-level debug console UART" - depends on DEBUG_OMAP2PLUS_UART - - config DEBUG_OMAP2UART1 - bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" - help - This covers at least h4, 2430sdp, 3430sdp, 3630sdp, - omap3 torpedo and 3530 lv som. - - config DEBUG_OMAP2UART2 - bool "OMAP2/3/4 UART2" - - config DEBUG_OMAP2UART3 - bool "OMAP2 UART3 (n8x0)" - - config DEBUG_OMAP3UART3 - bool "OMAP3 UART3 (most omap3 boards)" - help - This covers at least cm_t3x, beagle, crane, devkit8000, - igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, - and 3517evm. - - config DEBUG_OMAP4UART3 - bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" - - config DEBUG_OMAP3UART4 - bool "OMAP36XX UART4" - - config DEBUG_OMAP4UART4 - bool "OMAP4/5 UART4" - - config DEBUG_TI81XXUART1 - bool "TI81XX UART1 (ti8148evm)" - - config DEBUG_TI81XXUART2 - bool "TI81XX UART2" - - config DEBUG_TI81XXUART3 - bool "TI81XX UART3 (ti8168evm)" - - config DEBUG_AM33XXUART1 - bool "AM33XX UART1" - - config DEBUG_ZOOM_UART - bool "Zoom2/3 UART" -endchoice - -choice - prompt "Low-level debug console UART" - depends on DEBUG_ROCKCHIP_UART - - config DEBUG_RK29_UART0 - bool "RK29 UART0" - - config DEBUG_RK29_UART1 - bool "RK29 UART1" - - config DEBUG_RK29_UART2 - bool "RK29 UART2" - - config DEBUG_RK3X_UART0 - bool "RK3X UART0" - - config DEBUG_RK3X_UART1 - bool "RK3X UART1" - - config DEBUG_RK3X_UART2 - bool "RK3X UART2" - - config DEBUG_RK3X_UART3 - bool "RK3X UART3" -endchoice - -choice - prompt "Low-level debug console UART" - depends on DEBUG_LL && DEBUG_TEGRA_UART - - config TEGRA_DEBUG_UART_AUTO_ODMDATA - bool "Via ODMDATA" - help - Automatically determines which UART to use for low-level debug based - on the ODMDATA value. This value is part of the BCT, and is written - to the boot memory device using nvflash, or other flashing tool. - When bits 19:18 are 3, then bits 17:15 indicate which UART to use; - 0/1/2/3/4 are UART A/B/C/D/E. - - config TEGRA_DEBUG_UARTA - bool "UART A" - - config TEGRA_DEBUG_UARTB - bool "UART B" - - config TEGRA_DEBUG_UARTC - bool "UART C" - - config TEGRA_DEBUG_UARTD - bool "UART D" - - config TEGRA_DEBUG_UARTE - bool "UART E" - -endchoice - -choice - prompt "Low-level debug console UART" - depends on DEBUG_LL && DEBUG_STI_UART - - config STIH41X_DEBUG_ASC2 - bool "ASC2 UART" - help - Say Y here if you want kernel low-level debugging support - on STiH415/416 based platforms like b2000, which has - default UART wired up to ASC2. - - If unsure, say N. - - config STIH41X_DEBUG_SBC_ASC1 - bool "SBC ASC1 UART" - help - Say Y here if you want kernel low-level debugging support - on STiH415/416 based platforms like b2020. which has - default UART wired up to SBC ASC1. - - If unsure, say N. +config DEBUG_TEGRA_UART + bool + depends on ARCH_TEGRA -endchoice +config DEBUG_STI_UART + bool + depends on ARCH_STI config DEBUG_LL_INCLUDE string - default "debug/bcm2835.S" if DEBUG_BCM2835 - default "debug/cns3xxx.S" if DEBUG_CNS3XXX + default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART - default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ @@ -775,38 +895,175 @@ config DEBUG_LL_INCLUDE DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART - default "debug/keystone.S" if DEBUG_KEYSTONE_UART0 || \ - DEBUG_KEYSTONE_UART1 - default "debug/mvebu.S" if DEBUG_MVEBU_UART || \ - DEBUG_MVEBU_UART_ALTERNATE - default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART - default "debug/nomadik.S" if DEBUG_NOMADIK_UART - default "debug/nspire.S" if DEBUG_NSPIRE_CX_UART || \ - DEBUG_NSPIRE_CLASSIC_UART + default "debug/msm.S" if DEBUG_MSM_UART1 || \ + DEBUG_MSM_UART2 || \ + DEBUG_MSM_UART3 || \ + DEBUG_MSM8660_UART || \ + DEBUG_MSM8960_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART - default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART - default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \ - DEBUG_MMP_UART3 - default "debug/rockchip.S" if DEBUG_ROCKCHIP_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 - default "debug/socfpga.S" if DEBUG_SOCFPGA_UART default "debug/sti.S" if DEBUG_STI_UART - default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 default "debug/tegra.S" if DEBUG_TEGRA_UART - default "debug/u300.S" if DEBUG_U300_UART default "debug/ux500.S" if DEBUG_UX500_UART - default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ - DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 || \ - DEBUG_VEXPRESS_UART0_CRX + default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" +# Compatibility options for PL01x +config DEBUG_UART_PL01X + def_bool ARCH_EP93XX || \ + ARCH_INTEGRATOR || \ + ARCH_SPEAR3XX || \ + ARCH_SPEAR6XX || \ + ARCH_SPEAR13XX || \ + ARCH_VERSATILE + +# Compatibility options for 8250 +config DEBUG_UART_8250 + def_bool ARCH_DOVE || ARCH_EBSA110 || \ + (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \ + ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \ + ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \ + ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC + +config DEBUG_UART_PHYS + hex "Physical base address of debug UART" + default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 + default 0x01c28000 if DEBUG_SUNXI_UART0 + default 0x01c28400 if DEBUG_SUNXI_UART1 + default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1 + default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2 + default 0x02530c00 if DEBUG_KEYSTONE_UART0 + default 0x02531000 if DEBUG_KEYSTONE_UART1 + default 0x03010fe0 if ARCH_RPC + default 0x08108300 if DEBUG_DAVINCI_TNETV107X_UART1 + default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \ + DEBUG_VEXPRESS_UART0_CA9 + default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT + default 0x10124000 if DEBUG_RK3X_UART0 + default 0x10126000 if DEBUG_RK3X_UART1 + default 0x101f1000 if ARCH_VERSATILE + default 0x101fb000 if DEBUG_NOMADIK_UART + default 0x16000000 if ARCH_INTEGRATOR + default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0x20060000 if DEBUG_RK29_UART0 + default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 + default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 + default 0x20201000 if DEBUG_BCM2835 + default 0x40090000 if ARCH_LPC32XX + default 0x40100000 if DEBUG_PXA_UART1 + default 0x42000000 if ARCH_GEMINI + default 0x7c0003f8 if FOOTBRIDGE + default 0x80230000 if DEBUG_PICOXCELL_UART + default 0x80070000 if DEBUG_IMX23_UART + default 0x80074000 if DEBUG_IMX28_UART + default 0x808c0000 if ARCH_EP93XX + default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART + default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX + default 0xc0013000 if DEBUG_U300_UART + default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN + default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN + default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX + default 0xd0012000 if DEBUG_MVEBU_UART + default 0xd4017000 if DEBUG_MMP_UART2 + default 0xd4018000 if DEBUG_MMP_UART3 + default 0xe0000000 if ARCH_SPEAR13XX + default 0xf0000be0 if ARCH_EBSA110 + default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE + default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \ + ARCH_ORION5X + default 0xf8b00000 if DEBUG_HI3716_UART + default 0xfcb00000 if DEBUG_HI3620_UART + default 0xfe800000 if ARCH_IOP32X + default 0xffc02000 if DEBUG_SOCFPGA_UART + default 0xffd82340 if ARCH_IOP13XX + default 0xfff36000 if DEBUG_HIGHBANK_UART + default 0xfffff700 if ARCH_IOP33X + depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ + DEBUG_UART_8250 || DEBUG_UART_PL01X + +config DEBUG_UART_VIRT + hex "Virtual base address of debug UART" + default 0xe0010fe0 if ARCH_RPC + default 0xf0000be0 if ARCH_EBSA110 + default 0xf0009000 if DEBUG_CNS3XXX + default 0xf01fb000 if DEBUG_NOMADIK_UART + default 0xf0201000 if DEBUG_BCM2835 + default 0xf11f1000 if ARCH_VERSATILE + default 0xf1600000 if ARCH_INTEGRATOR + default 0xf1c28000 if DEBUG_SUNXI_UART0 + default 0xf1c28400 if DEBUG_SUNXI_UART1 + default 0xf2100000 if DEBUG_PXA_UART1 + default 0xf4090000 if ARCH_LPC32XX + default 0xf4200000 if ARCH_GEMINI + default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 + default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0xfb009000 if DEBUG_REALVIEW_STD_PORT + default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT + default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX + default 0xfd000000 if ARCH_SPEAR13XX + default 0xfd012000 if ARCH_MV78XX0 + default 0xfde12000 if ARCH_DOVE + default 0xfe012000 if ARCH_ORION5X + default 0xfe017000 if DEBUG_MMP_UART2 + default 0xfe018000 if DEBUG_MMP_UART3 + default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART + default 0xfe230000 if DEBUG_PICOXCELL_UART + default 0xfe800000 if ARCH_IOP32X + default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HI3716_UART + default 0xfeb24000 if DEBUG_RK3X_UART0 + default 0xfeb26000 if DEBUG_RK3X_UART1 + default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 + default 0xfeb31000 if DEBUG_KEYSTONE_UART1 + default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE + default 0xfed60000 if DEBUG_RK29_UART0 + default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 + default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 + default 0xfec02000 if DEBUG_SOCFPGA_UART + default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 + default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 + default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 + default 0xfed12000 if ARCH_KIRKWOOD + default 0xfedc0000 if ARCH_EP93XX + default 0xfee003f8 if FOOTBRIDGE + default 0xfee08300 if DEBUG_DAVINCI_TNETV107X_UART1 + default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART + default 0xfef36000 if DEBUG_HIGHBANK_UART + default 0xfee82340 if ARCH_IOP13XX + default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN + default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN + default 0xfefff700 if ARCH_IOP33X + default 0xff003000 if DEBUG_U300_UART + default DEBUG_UART_PHYS if !MMU + depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ + DEBUG_UART_8250 || DEBUG_UART_PL01X + +config DEBUG_UART_8250_SHIFT + int "Register offset shift for the 8250 debug UART" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default 0 if FOOTBRIDGE || ARCH_IOP32X + default 2 + +config DEBUG_UART_8250_WORD + bool "Use 32-bit accesses for 8250 UART" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + depends on DEBUG_UART_8250_SHIFT >= 2 + default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \ + ARCH_KEYSTONE || \ + DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ + DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 + +config DEBUG_UART_8250_FLOW_CONTROL + bool "Enable flow control for 8250 UART" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC + config DEBUG_UNCOMPRESS bool - depends on ARCH_MULTIPLATFORM + depends on ARCH_MULTIPLATFORM || ARCH_MSM default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ - !DEBUG_TEGRA_UART + (!DEBUG_TEGRA_UART || !ZBOOT_ROM) help This option influences the normal decompressor output for multiplatform kernels. Normally, multiplatform kernels disable @@ -820,7 +1077,7 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string - default "debug/uncompress.h" if ARCH_MULTIPLATFORM + default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM default "mach/uncompress.h" config EARLY_PRINTK diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 6fd2ceae305a6a5cf6c5d2e766e4c91848b147f7..a37a50f575a27af2c95abca5c473d6a60233d8b9 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -190,6 +190,7 @@ machine-$(CONFIG_ARCH_S5PV210) += s5pv210 machine-$(CONFIG_ARCH_SA1100) += sa1100 machine-$(CONFIG_ARCH_SHARK) += shark machine-$(CONFIG_ARCH_SHMOBILE) += shmobile +machine-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile machine-$(CONFIG_ARCH_SIRF) += prima2 machine-$(CONFIG_ARCH_SOCFPGA) += socfpga machine-$(CONFIG_ARCH_STI) += sti diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S index e2d636336b7c783634747a6433e57eebc56b6d6c..e7f80928949c8da53a13b2bca5ace2928c1ba4c2 100644 --- a/arch/arm/boot/compressed/head-shmobile.S +++ b/arch/arm/boot/compressed/head-shmobile.S @@ -55,12 +55,47 @@ __tmp_stack: __continue: #endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */ - /* Set board ID necessary for boot */ - ldr r7, 1f @ Set machine type register - mov r8, #0 @ pass null pointer as atag + adr r0, dtb_info + ldmia r0, {r1, r3, r4, r5, r7} + + sub r0, r0, r1 @ calculate the delta offset + add r5, r5, r0 @ _edata + + ldr lr, [r5, #0] @ check if valid DTB is present + cmp lr, r3 + bne 0f + + add r9, r7, #31 @ rounded up to a multiple + bic r9, r9, #31 @ ... of 32 bytes + + add r6, r9, r5 @ copy from _edata + add r9, r9, r4 @ to MEMORY_START + +1: ldmdb r6!, {r0 - r3, r10 - r12, lr} + cmp r6, r5 + stmdb r9!, {r0 - r3, r10 - r12, lr} + bhi 1b + + /* Success: Zero board ID, pointer to start of memory for atag/dtb */ + mov r7, #0 + mov r8, r4 b 2f -1 : .long MACH_TYPE + .align 2 +dtb_info: + .word dtb_info +#ifndef __ARMEB__ + .word 0xedfe0dd0 @ sig is 0xd00dfeed big endian +#else + .word 0xd00dfeed +#endif + .word MEMORY_START + .word _edata + .word 0x4000 @ maximum DTB size +0: + /* Failure: Zero board ID, NULL atag/dtb */ + mov r7, #0 + mov r8, #0 @ pass null pointer as atag 2 : #endif /* CONFIG_ZBOOT_ROM */ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 641b3c9a7028c3368b5502c4a0f229c99327e521..000cf7628e6e90f49357a25c42a73bf07cc97b67 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -42,24 +42,27 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb -dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb +dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \ + bcm28155-ap.dtb dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ + dove-d2plug.dtb \ dove-dove-db.dtb dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ exynos4210-universal_c210.dtb \ exynos4412-odroidx.dtb \ - exynos4412-smdk4412.dtb \ exynos4412-origen.dtb \ + exynos4412-smdk4412.dtb \ + exynos4412-trats2.dtb \ exynos5250-arndale.dtb \ - exynos5440-sd5v1.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ exynos5420-smdk5420.dtb \ + exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb @@ -83,12 +86,14 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ + kirkwood-mv88f6281gtw-ge.dtb \ kirkwood-netgear_readynas_duo_v2.dtb \ kirkwood-ns2.dtb \ kirkwood-ns2lite.dtb \ kirkwood-ns2max.dtb \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ + kirkwood-nsa310a.dtb \ kirkwood-sheevaplug.dtb \ kirkwood-sheevaplug-esata.dtb \ kirkwood-topkick.dtb \ @@ -100,7 +105,9 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ + armada-370-netgear-rn102.dtb \ armada-370-rd.dtb \ + armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ armada-xp-gp.dtb \ armada-xp-openblocks-ax3-4.dtb @@ -112,6 +119,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx27-pdk.dtb \ imx27-phytec-phycore-som.dtb \ imx27-phytec-phycore-rdk.dtb \ + imx27-phytec-phycard-s-som.dtb \ + imx27-phytec-phycard-s-rdk.dtb \ imx31-bug.dtb \ imx51-apf51.dtb \ imx51-apf51dev.dtb \ @@ -131,6 +140,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ + imx6q-wandboard.dtb \ imx6sl-evk.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ @@ -143,7 +153,9 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-cfa10037.dtb \ imx28-cfa10049.dtb \ imx28-cfa10055.dtb \ + imx28-cfa10056.dtb \ imx28-cfa10057.dtb \ + imx28-cfa10058.dtb \ imx28-evk.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ @@ -176,13 +188,14 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am43x-epos-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb -dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ - hrefprev60.dtb \ - hrefv60plus.dtb \ - ccu8540.dtb \ - ccu9540.dtb +dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ + ste-hrefprev60.dtb \ + ste-hrefv60plus.dtb \ + ste-ccu8540.dtb \ + ste-ccu9540.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ + emev2-kzm9d-reference.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7740-armadillo800eva-reference.dtb \ @@ -192,6 +205,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ sh73a0-kzm9g-reference.dtb \ r8a73a4-ape6evm.dtb \ sh7372-mackerel.dtb +dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d-reference.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \ socfpga_vt.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ @@ -206,11 +220,14 @@ dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \ stih415-b2020.dtb \ stih416-b2020.dtb dtb-$(CONFIG_ARCH_SUNXI) += \ + sun4i-a10-a1000.dtb \ sun4i-a10-cubieboard.dtb \ sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ sun5i-a10s-olinuxino-micro.dtb \ - sun5i-a13-olinuxino.dtb + sun5i-a13-olinuxino.dtb \ + sun6i-a31-colombus.dtb \ + sun7i-a20-olinuxino-micro.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ tegra20-medcom-wide.dtb \ @@ -224,8 +241,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ - tegra114-dalmore.dtb \ - tegra114-pluto.dtb + tegra114-dalmore.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 444b4ede0d6056c878fd992e80d98416b7c94906..d318987d44a1931931f553eaad143c54efc53280 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -120,6 +120,35 @@ status = "okay"; }; + musb: usb@47400000 { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; + }; + i2c0: i2c@44e0b000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 3aee1a43782db9068ac1d82cdd39216de5535a74..e8ec8756e4985f2b616a2aa8da28682dbd043246 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -171,6 +171,35 @@ }; }; + musb: usb@47400000 { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; + }; + i2c1: i2c@4802a000 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 0c8ad173d2b0894b216f54d4e3b1ef9775327166..4f339fa91c5772b7eaaa4c9a306a1d6808387765 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "am33xx.dtsi" +#include / { model = "TI AM335x EVM-SK"; @@ -207,6 +208,22 @@ }; }; + musb: usb@47400000 { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + }; + epwmss2: epwmss@48304000 { status = "okay"; @@ -298,7 +315,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&ecap2 0 50000 1>; + pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 58 61 66 75 90 125 170 255>; default-brightness-level = <8>; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 38b446ba1ce104b42fce6b2737ba2c8755fda4a1..f9c5da9c7fe1ce7d56557fb4582a0d9a53bbcfde 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -26,6 +26,10 @@ serial5 = &uart5; d_can0 = &dcan0; d_can1 = &dcan1; + usb0 = &usb0; + usb1 = &usb1; + phy0 = &usb0_phy; + phy1 = &usb1_phy; }; cpus { @@ -333,21 +337,132 @@ status = "disabled"; }; - usb@47400000 { - compatible = "ti,musb-am33xx"; - reg = <0x47400000 0x1000 /* usbss */ - 0x47401000 0x800 /* musb instance 0 */ - 0x47401800 0x800>; /* musb instance 1 */ - interrupts = <17 /* usbss */ - 18 /* musb instance 0 */ - 19>; /* musb instance 1 */ - multipoint = <1>; - num-eps = <16>; - ram-bits = <12>; - port0-mode = <3>; - port1-mode = <3>; - power = <250>; + usb: usb@47400000 { + compatible = "ti,am33xx-usb"; + reg = <0x47400000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; ti,hwmods = "usb_otg_hs"; + status = "disabled"; + + ctrl_mod: control@44e10000 { + compatible = "ti,am335x-usb-ctrl-module"; + reg = <0x44e10620 0x10 + 0x44e10648 0x4>; + reg-names = "phy_ctrl", "wakeup"; + status = "disabled"; + }; + + usb0_phy: usb-phy@47401300 { + compatible = "ti,am335x-usb-phy"; + reg = <0x47401300 0x100>; + reg-names = "phy"; + status = "disabled"; + ti,ctrl_mod = <&ctrl_mod>; + }; + + usb0: usb@47401000 { + compatible = "ti,musb-am33xx"; + status = "disabled"; + reg = <0x47401400 0x400 + 0x47401000 0x200>; + reg-names = "mc", "control"; + + interrupts = <18>; + interrupt-names = "mc"; + dr_mode = "otg"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + phys = <&usb0_phy>; + + dmas = <&cppi41dma 0 0 &cppi41dma 1 0 + &cppi41dma 2 0 &cppi41dma 3 0 + &cppi41dma 4 0 &cppi41dma 5 0 + &cppi41dma 6 0 &cppi41dma 7 0 + &cppi41dma 8 0 &cppi41dma 9 0 + &cppi41dma 10 0 &cppi41dma 11 0 + &cppi41dma 12 0 &cppi41dma 13 0 + &cppi41dma 14 0 &cppi41dma 0 1 + &cppi41dma 1 1 &cppi41dma 2 1 + &cppi41dma 3 1 &cppi41dma 4 1 + &cppi41dma 5 1 &cppi41dma 6 1 + &cppi41dma 7 1 &cppi41dma 8 1 + &cppi41dma 9 1 &cppi41dma 10 1 + &cppi41dma 11 1 &cppi41dma 12 1 + &cppi41dma 13 1 &cppi41dma 14 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; + }; + + usb1_phy: usb-phy@47401b00 { + compatible = "ti,am335x-usb-phy"; + reg = <0x47401b00 0x100>; + reg-names = "phy"; + status = "disabled"; + ti,ctrl_mod = <&ctrl_mod>; + }; + + usb1: usb@47401800 { + compatible = "ti,musb-am33xx"; + status = "disabled"; + reg = <0x47401c00 0x400 + 0x47401800 0x200>; + reg-names = "mc", "control"; + interrupts = <19>; + interrupt-names = "mc"; + dr_mode = "otg"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + phys = <&usb1_phy>; + + dmas = <&cppi41dma 15 0 &cppi41dma 16 0 + &cppi41dma 17 0 &cppi41dma 18 0 + &cppi41dma 19 0 &cppi41dma 20 0 + &cppi41dma 21 0 &cppi41dma 22 0 + &cppi41dma 23 0 &cppi41dma 24 0 + &cppi41dma 25 0 &cppi41dma 26 0 + &cppi41dma 27 0 &cppi41dma 28 0 + &cppi41dma 29 0 &cppi41dma 15 1 + &cppi41dma 16 1 &cppi41dma 17 1 + &cppi41dma 18 1 &cppi41dma 19 1 + &cppi41dma 20 1 &cppi41dma 21 1 + &cppi41dma 22 1 &cppi41dma 23 1 + &cppi41dma 24 1 &cppi41dma 25 1 + &cppi41dma 26 1 &cppi41dma 27 1 + &cppi41dma 28 1 &cppi41dma 29 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; + }; + + cppi41dma: dma-controller@07402000 { + compatible = "ti,am3359-cppi41"; + reg = <0x47400000 0x1000 + 0x47402000 0x1000 + 0x47403000 0x1000 + 0x47404000 0x4000>; + reg-names = "glue", "controller", "scheduler", "queuemgr"; + interrupts = <17>; + interrupt-names = "glue"; + #dma-cells = <2>; + #dma-channels = <30>; + #dma-requests = <256>; + status = "disabled"; + }; }; epwmss0: epwmss@48300000 { diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index beee1699d49eb553a474a9186b508b6fb1da4230..90ce29dbe119e4680b6f7b9b61d177319d8251c1 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -14,7 +14,7 @@ */ /dts-v1/; -/include/ "armada-370.dtsi" +#include "armada-370.dtsi" / { model = "Marvell Armada 370 Evaluation Board"; @@ -30,6 +30,9 @@ }; soc { + ranges = ; + internal-regs { serial@12000 { clock-frequency = <200000000>; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 45b107763e3b7c88f1632ef8bf00adb6027258b5..2471d9da767bfad77a4419c20d17407473e704fb 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "armada-370.dtsi" +#include "armada-370.dtsi" / { model = "Globalscale Mirabox"; @@ -25,6 +25,25 @@ }; soc { + ranges = ; + + pcie-controller { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected on the PCB to a USB 3.0 XHCI controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + internal-regs { serial@12000 { clock-frequency = <200000000>; @@ -120,22 +139,6 @@ reg = <0x25>; }; }; - - pcie-controller { - status = "okay"; - - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected on the PCB to a USB 3.0 XHCI controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts new file mode 100644 index 0000000000000000000000000000000000000000..05e4485a822521ec1ca234c7991c674f817f4667 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -0,0 +1,179 @@ +/* + * Device Tree file for NETGEAR ReadyNAS 102 + * + * Copyright (C) 2013, Arnaud EBALARD + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +#include "armada-370.dtsi" + +/ { + model = "NETGEAR ReadyNAS 102"; + compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + internal-regs { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + pinctrl { + power_led_pin: power-led-pin { + marvell,pins = "mpp57"; + marvell,function = "gpio"; + }; + sata1_led_pin: sata1-led-pin { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + sata2_led_pin: sata2-led-pin { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + backup_led_pin: backup-led-pin { + marvell,pins = "mpp56"; + marvell,function = "gpio"; + }; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ethernet@74000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + usb@50000 { + status = "okay"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + clock-frequency = <100000>; + status = "okay"; + + g762: g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + }; + + pcie-controller { + status = "okay"; + + /* Connected to Marvell SATA controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to FL1009 USB 3.0 controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + g762_clk: fixedclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = < &power_led_pin + &sata1_led_pin + &sata2_led_pin + &backup_led_pin >; + pinctrl-names = "default"; + + blue_power_led { + label = "rn102:blue:pwr"; + gpios = <&gpio1 25 1>; /* GPIO 57 Active Low */ + linux,default-trigger = "heartbeat"; + }; + + green_sata1_led { + label = "rn102:green:sata1"; + gpios = <&gpio0 15 1>; /* GPIO 15 Active Low */ + default-state = "on"; + }; + + green_sata2_led { + label = "rn102:green:sata2"; + gpios = <&gpio0 14 1>; /* GPIO 14 Active Low */ + default-state = "on"; + }; + + green_backup_led { + label = "rn102:green:backup"; + gpios = <&gpio1 24 1>; /* GPIO 56 Active Low */ + default-state = "on"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power Button"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio1 30 1>; + }; + + button@2 { + label = "Reset Button"; + linux,code = <0x198>; /* KEY_RESTART */ + gpios = <&gpio0 6 1>; + }; + + button@3 { + label = "Backup Button"; + linux,code = <133>; /* KEY_COPY */ + gpios = <&gpio1 26 1>; + }; + }; + +}; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index a3a2fedb87267dd21f3146d4434e91f0f80bd614..f81810a596292ffa4494d5b50b34bdc974118ecf 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "armada-370.dtsi" +#include "armada-370.dtsi" / { model = "Marvell Armada 370 Reference Design"; @@ -28,6 +28,25 @@ }; soc { + ranges = ; + + pcie-controller { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Internal mini-PCIe connector */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + internal-regs { serial@12000 { clock-frequency = <200000000>; @@ -85,22 +104,6 @@ gpios = <&gpio0 6 1>; }; }; - - pcie-controller { - status = "okay"; - - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Internal mini-PCIe connector */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 90b117624abb2230105855b70fbdf313fa73a05e..1de2dae0fdae6f6353169dc423d75e07d4f65f6f 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -18,6 +18,8 @@ /include/ "skeleton64.dtsi" +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + / { model = "Marvell Armada 370 and XP SoC"; compatible = "marvell,armada-370-xp"; @@ -38,18 +40,73 @@ }; soc { - #address-cells = <1>; + #address-cells = <2>; #size-cells = <1>; - compatible = "simple-bus"; + controller = <&mbusc>; interrupt-parent = <&mpic>; - ranges = <0 0 0xd0000000 0x0100000 /* internal registers */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; + pcie-mem-aperture = <0xe0000000 0x8000000>; + pcie-io-aperture = <0xe8000000 0x100000>; + + devbus-bootcs { + compatible = "marvell,mvebu-devbus"; + reg = ; + ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs0 { + compatible = "marvell,mvebu-devbus"; + reg = ; + ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs1 { + compatible = "marvell,mvebu-devbus"; + reg = ; + ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs2 { + compatible = "marvell,mvebu-devbus"; + reg = ; + ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs3 { + compatible = "marvell,mvebu-devbus"; + reg = ; + ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; internal-regs { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>; + }; mpic: interrupt-controller@20000 { compatible = "marvell,mpic"; @@ -81,10 +138,8 @@ }; timer@20300 { - compatible = "marvell,armada-370-xp-timer"; reg = <0x20300 0x30>, <0x21040 0x30>; interrupts = <37>, <38>, <39>, <40>, <5>, <6>; - clocks = <&coreclk 2>; }; sata@a0000 { @@ -195,50 +250,6 @@ status = "disabled"; }; - devbus-bootcs@10400 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10400 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - devbus-cs0@10408 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10408 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - devbus-cs1@10410 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10410 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - devbus-cs2@10418 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10418 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - devbus-cs3@10420 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10420 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index fa3dfc6b4c6a88c27d459f7587df7f334d1cd386..e134d7a90c9ab9a5d24bfb500ed9206875f8f033 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -15,7 +15,7 @@ * common to all Armada SoCs. */ -/include/ "armada-370-xp.dtsi" +#include "armada-370-xp.dtsi" /include/ "skeleton.dtsi" / { @@ -29,8 +29,66 @@ }; soc { - ranges = <0 0xd0000000 0x0100000 /* internal registers */ - 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; + compatible = "marvell,armada370-mbus", "simple-bus"; + + bootrom { + compatible = "marvell,bootrom"; + reg = ; + }; + + pcie-controller { + compatible = "marvell,armada-370-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + }; + internal-regs { system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; @@ -78,7 +136,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; }; @@ -89,7 +147,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; }; @@ -100,10 +158,15 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <91>; }; + timer@20300 { + compatible = "marvell,armada-370-timer"; + clocks = <&coreclk 2>; + }; + coreclk: mvebu-sar@18230 { compatible = "marvell,armada-370-core-clock"; reg = <0x18230 0x08>; @@ -169,54 +232,6 @@ 0x18304 0x4>; status = "okay"; }; - - pcie-controller { - compatible = "marvell,armada-370-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 9>; - status = "disabled"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts new file mode 100644 index 0000000000000000000000000000000000000000..c5fe57269f5aca5c28f61de250dd5663298ec27e --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -0,0 +1,164 @@ +/* + * Device Tree file for Marvell RD-AXPWiFiAP. + * + * Note: this board is shipped with a new generation boot loader that + * remaps internal registers at 0xf1000000. Therefore, if earlyprintk + * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be + * used. + * + * Copyright (C) 2013 Marvell + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +#include "armada-xp-mv78230.dtsi" + +/ { + model = "Marvell RD-AXPWiFiAP"; + compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */ + }; + + soc { + ranges = ; + + pcie-controller { + status = "okay"; + + /* First mini-PCIe port */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Second mini-PCIe port */ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Renesas uPD720202 USB 3.0 controller */ + pcie@3,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + }; + + internal-regs { + pinctrl { + pinctrl-0 = <&pmx_phy_int>; + pinctrl-names = "default"; + + pmx_ge0: pmx-ge0 { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + + pmx_ge1: pmx-ge1 { + marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", + "mpp16", "mpp17", "mpp18", "mpp19", + "mpp20", "mpp21", "mpp22", "mpp23"; + marvell,function = "ge1"; + }; + + pmx_keys: pmx-keys { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + pmx_spi: pmx-spi { + marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; + marvell,function = "spi"; + }; + + pmx_phy_int: pmx-phy-int { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + clock-frequency = <250000000>; + status = "okay"; + }; + + serial@12100 { + clock-frequency = <250000000>; + status = "okay"; + }; + + sata@a0000 { + nr-ports = <1>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet@70000 { + pinctrl-0 = <&pmx_ge0>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + pinctrl-0 = <&pmx_ge1>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + spi0: spi@10600 { + status = "okay"; + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_keys>; + pinctrl-names = "default"; + + button@1 { + label = "Factory Reset Button"; + linux,code = <141>; /* KEY_SETUP */ + gpios = <&gpio1 1 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index e28e68ff864dbd40c2aca2a00d25e74cc0f70137..bcf6d79a57ec55febf5f037affdee94e901f3628 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -14,7 +14,7 @@ */ /dts-v1/; -/include/ "armada-xp-mv78460.dtsi" +#include "armada-xp-mv78460.dtsi" / { model = "Marvell Armada XP Evaluation Board"; @@ -30,9 +30,70 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ - 0xf0000000 0 0xf0000000 0x1000000>; /* Device Bus, NOR 16MiB */ + ranges = ; + + devbus-bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 16 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + status = "okay"; + + /* + * All 6 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + pcie@3,0 { + /* Port 0, Lane 2 */ + status = "okay"; + }; + pcie@4,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; + }; internal-regs { serial@12000 { @@ -127,68 +188,6 @@ spi-max-frequency = <20000000>; }; }; - - pcie-controller { - status = "okay"; - - /* - * All 6 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - }; - pcie@3,0 { - /* Port 0, Lane 2 */ - status = "okay"; - }; - pcie@4,0 { - /* Port 0, Lane 3 */ - status = "okay"; - }; - pcie@9,0 { - /* Port 2, Lane 0 */ - status = "okay"; - }; - pcie@10,0 { - /* Port 3, Lane 0 */ - status = "okay"; - }; - }; - - devbus-bootcs@10400 { - status = "okay"; - ranges = <0 0xf0000000 0x1000000>; - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 16 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x1000000>; - bank-width = <2>; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index c87b2de29c30161a1c032c21d80c07c422ecb2f6..2298e4a910e230748dda13cb70cab55713932a10 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -14,7 +14,7 @@ */ /dts-v1/; -/include/ "armada-xp-mv78460.dtsi" +#include "armada-xp-mv78460.dtsi" / { model = "Marvell Armada XP Development Board DB-MV784MP-GP"; @@ -39,9 +39,58 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ - 0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>; + ranges = ; + + devbus-bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 16 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + status = "okay"; + + /* + * The 3 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; + }; internal-regs { serial@12000 { @@ -126,56 +175,6 @@ spi-max-frequency = <108000000>; }; }; - - devbus-bootcs@10400 { - status = "okay"; - ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */ - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 16 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x1000000>; - bank-width = <2>; - }; - }; - - pcie-controller { - status = "okay"; - - /* - * The 3 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@9,0 { - /* Port 2, Lane 0 */ - status = "okay"; - }; - pcie@10,0 { - /* Port 3, Lane 0 */ - status = "okay"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index f8eaa383e07fbdc6904711d72699bc2df6eb0190..0358a33cba489d40c97fda0a1bd7cb5769ade9b8 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -13,7 +13,7 @@ * common to all Armada XP SoCs. */ -/include/ "armada-xp.dtsi" +#include "armada-xp.dtsi" / { model = "Marvell Armada XP MV78230 SoC"; @@ -44,6 +44,124 @@ }; soc { + /* + * MV78230 has 2 PCIe units Gen2.0: One unit can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + }; + internal-regs { pinctrl { compatible = "marvell,mv78230-pinctrl"; @@ -63,7 +181,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; }; @@ -74,113 +192,9 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <87>, <88>, <89>; }; - - /* - * MV78230 has 2 PCIe units Gen2.0: One unit can be - * configured as x4 or quad x1 lanes. One unit is - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - -#address-cells = <3>; -#size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; - status = "disabled"; - }; - - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; - - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; - - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 2d9335da210c454b395fa0cb039bceab52604cdd..0e82c5062243f2d20f608bbc36d80faf37645abd 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -13,7 +13,7 @@ * common to all Armada XP SoCs. */ -/include/ "armada-xp.dtsi" +#include "armada-xp.dtsi" / { model = "Marvell Armada XP MV78260 SoC"; @@ -45,6 +45,145 @@ }; soc { + /* + * MV78260 has 3 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ + 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 + 0x81000000 0 0 0x81000000 0xa 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; + }; + internal-regs { pinctrl { compatible = "marvell,mv78260-pinctrl"; @@ -64,7 +203,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; }; @@ -75,7 +214,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; }; @@ -86,7 +225,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <91>; }; @@ -97,128 +236,6 @@ clocks = <&gateclk 1>; status = "disabled"; }; - - /* - * MV78260 has 3 PCIe units Gen2.0: Two units can be - * configured as x4 or quad x1 lanes. One unit is - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; - status = "disabled"; - }; - - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; - - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; - - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; - - pcie@10,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; - status = "disabled"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index c7b1f4d5c1c76f9c2ef710b00190c7080ef1829c..e82c1b80af171e3915b6e09f95bfb9078d0b0201 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -13,7 +13,7 @@ * common to all Armada XP SoCs. */ -/include/ "armada-xp.dtsi" +#include "armada-xp.dtsi" / { model = "Marvell Armada XP MV78460 SoC"; @@ -61,6 +61,227 @@ }; soc { + /* + * MV78460 has 4 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. Two units are + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ + + 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ + 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 + 0x81000000 0 0 0x81000000 0xa 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; + }; + internal-regs { pinctrl { compatible = "marvell,mv78460-pinctrl"; @@ -80,7 +301,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; }; @@ -91,7 +312,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; }; @@ -102,7 +323,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <91>; }; @@ -113,194 +334,6 @@ clocks = <&gateclk 1>; status = "disabled"; }; - - /* - * MV78460 has 4 PCIe units Gen2.0: Two units can be - * configured as x4 or quad x1 lanes. Two units are - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */ - 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */ - 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; - status = "disabled"; - }; - - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; - - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; - - pcie@5,0 { - device_type = "pci"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; - reg = <0x2800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 9>; - status = "disabled"; - }; - - pcie@6,0 { - device_type = "pci"; - assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; - reg = <0x3000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 63>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 10>; - status = "disabled"; - }; - - pcie@7,0 { - device_type = "pci"; - assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; - reg = <0x3800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 64>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 11>; - status = "disabled"; - }; - - pcie@8,0 { - device_type = "pci"; - assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; - reg = <0x4000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 65>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 12>; - status = "disabled"; - }; - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; - - pcie@10,0 { - device_type = "pci"; - assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; - status = "disabled"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 8f510458ea863150575213056e333fe90e2ccb81..5695afcc04bf1a7fa7fa13024acd8bb794464ed5 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "armada-xp-mv78260.dtsi" +#include "armada-xp-mv78260.dtsi" / { model = "PlatHome OpenBlocks AX3-4 board"; @@ -27,9 +27,46 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ - 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>; + ranges = ; + + devbus-bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 128 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x8000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + status = "okay"; + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; internal-regs { serial@12000 { @@ -148,49 +185,6 @@ usb@51000 { status = "okay"; }; - - /* USB interface in the mini-PCIe connector */ - usb@52000 { - status = "okay"; - }; - - devbus-bootcs@10400 { - status = "okay"; - ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 128 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x8000000>; - bank-width = <2>; - }; - }; - - pcie-controller { - status = "okay"; - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 416eb94818449c7d2ff78ecae2e453be614e6830..def125c0eeaa1596892f5cda162667d99853827c 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -16,7 +16,7 @@ * common to all Armada SoCs. */ -/include/ "armada-370-xp.dtsi" +#include "armada-370-xp.dtsi" / { model = "Marvell Armada XP family SoC"; @@ -27,6 +27,13 @@ }; soc { + compatible = "marvell,armadaxp-mbus", "simple-bus"; + + bootrom { + compatible = "marvell,bootrom"; + reg = ; + }; + internal-regs { L2: l2-cache { compatible = "marvell,aurora-system-cache"; @@ -62,7 +69,7 @@ }; timer@20300 { - marvell,timer-25Mhz; + compatible = "marvell,armada-xp-timer"; }; coreclk: mvebu-sar@18230 { diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 92b9e21389db6c7d800cf97ecabf39133819f88c..f77065506f1e63df9183ac1309a5788ed4714cb7 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -120,6 +120,7 @@ interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..93ca66f80360345c2518b53fe815db8d989d636c --- /dev/null +++ b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi @@ -0,0 +1,17 @@ +/* + * at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC + * + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD + * + * Licensed under GPLv2 or later. + */ + +#include "at91rm9200.dtsi" + +/ { + compatible = "atmel,at91rm9200-pqfp", "atmel,at91rm9200"; +}; + +&pioD { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index c7ccbcbffb3e6b283e6f7976271f42703fc7b90e..56ee8282a7a8ef201f1833135ddfb3b4d81e38a9 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -572,6 +572,7 @@ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index bb7f564b3a557fda71f0f9289e1fd7b7225ee73d..9fb7ffd32af26cd9ab7d959f7e1641b2937e050a 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -291,6 +291,22 @@ }; }; + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + ; + }; + }; + + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + ; + }; + }; + tcb0 { pinctrl_tcb0_tclk0: tcb0_tclk0-0 { atmel,pins = ; @@ -471,6 +487,8 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; status = "disabled"; }; @@ -483,6 +501,8 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 3d77dbe406f4736aacb7a1d361f4f02758225aa0..27a9352b9d7a02e047303a2fb72bb47a5ec9f0c8 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -40,6 +40,15 @@ i2c0: i2c@f8010000 { status = "okay"; + + qt1070: keyboard@1b { + compatible = "qt1070"; + reg = <0x1b>; + interrupt-parent = <&pioA>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qt1070_irq>; + }; }; i2c1: i2c@f8014000 { @@ -66,6 +75,13 @@ ; /* PA7 gpio CD pin pull up and deglitch */ }; }; + + qt1070 { + pinctrl_qt1070_irq: qt1070_irq { + atmel,pins = + ; + }; + }; }; spi0: spi@f0000000 { @@ -121,7 +137,7 @@ enter { label = "Enter"; - gpios = <&pioB 4 GPIO_ACTIVE_LOW>; + gpios = <&pioB 3 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 57d45f5bea09e77c72585fade7041521311bbf34..cf78ac0b04b12f77a3bc707e0228ce19a9e09785 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -542,6 +542,9 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(14)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 49e3c45818c236caf750fe5f42137b963f0eb7c2..3a9f6fa4a36ad749563dec54735c186fa582fa51 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -59,6 +59,11 @@ i2c0: i2c@f8010000 { status = "okay"; + + wm8731: wm8731@1a { + compatible = "wm8731"; + reg = <0x1a>; + }; }; pinctrl@fffff400 { @@ -90,6 +95,10 @@ watchdog@fffffe40 { status = "okay"; }; + + ssc0: ssc@f0010000 { + status = "okay"; + }; }; usb0: ohci@00600000 { @@ -105,4 +114,19 @@ status = "okay"; }; }; + + sound { + compatible = "atmel,sam9x5-wm8731-audio"; + + atmel,model = "wm8731 @ AT91SAM9X5EK"; + + atmel,audio-routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "LLINEIN", "Line In Jack", + "RLINEIN", "Line In Jack"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; }; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index a0f2721ea583bbc358452e7e415c0eadc353e2d6..8678e0c1111981be494cfe6fecf05eb61a393169 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -329,6 +329,12 @@ sirf,function = "uart0"; }; }; + uart0_noflow_pins_a: uart0@1 { + uart { + sirf,pins = "uart0_nostreamctrlgrp"; + sirf,function = "uart0_nostreamctrl"; + }; + }; uart1_pins_a: uart1@0 { uart { sirf,pins = "uart1grp"; diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts index 67ec524098b53516e54961e19d84e6be1e517e30..9d36eb4e3c41e8f2d0e7047acf08809dbd39f835 100644 --- a/arch/arm/boot/dts/bcm11351-brt.dts +++ b/arch/arm/boot/dts/bcm11351-brt.dts @@ -17,7 +17,7 @@ / { model = "BCM11351 BRT board"; - compatible = "bcm,bcm11351-brt", "bcm,bcm11351"; + compatible = "brcm,bcm11351-brt", "brcm,bcm11351"; memory { reg = <0x80000000 0x40000000>; /* 1 GB */ @@ -27,18 +27,18 @@ status = "okay"; }; - sdio0: sdio@0x3f180000 { + sdio1: sdio@3f180000 { max-frequency = <48000000>; status = "okay"; }; - sdio1: sdio@0x3f190000 { + sdio2: sdio@3f190000 { non-removable; max-frequency = <48000000>; status = "okay"; }; - sdio3: sdio@0x3f1b0000 { + sdio4: sdio@3f1b0000 { max-frequency = <48000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index c0cdf66f8964f7a800390ee0dd8c6899b5c0baad..05a5aabe3b2ccadbef92c305659ccf4f51fd7580 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 Broadcom Corporation + * Copyright (C) 2012-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -18,7 +18,7 @@ / { model = "BCM11351 SoC"; - compatible = "bcm,bcm11351"; + compatible = "brcm,bcm11351"; interrupt-parent = <&gic>; chosen { @@ -35,12 +35,12 @@ }; smc@0x3404c000 { - compatible = "bcm,bcm11351-smc", "bcm,kona-smc"; + compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */ }; uart@3e000000 { - compatible = "bcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e000000 0x1000>; clock-frequency = <13000000>; @@ -50,42 +50,47 @@ }; L2: l2-cache { - compatible = "bcm,bcm11351-a2-pl310-cache"; + compatible = "brcm,bcm11351-a2-pl310-cache"; reg = <0x3ff20000 0x1000>; cache-unified; cache-level = <2>; }; + watchdog@35002f40 { + compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt"; + reg = <0x35002f40 0x6c>; + }; + timer@35006000 { - compatible = "bcm,kona-timer"; + compatible = "brcm,kona-timer"; reg = <0x35006000 0x1000>; interrupts = ; clock-frequency = <32768>; }; - sdio0: sdio@0x3f180000 { - compatible = "bcm,kona-sdhci"; + sdio1: sdio@3f180000 { + compatible = "brcm,kona-sdhci"; reg = <0x3f180000 0x10000>; interrupts = <0x0 77 0x4>; status = "disabled"; }; - sdio1: sdio@0x3f190000 { - compatible = "bcm,kona-sdhci"; + sdio2: sdio@3f190000 { + compatible = "brcm,kona-sdhci"; reg = <0x3f190000 0x10000>; interrupts = <0x0 76 0x4>; status = "disabled"; }; - sdio2: sdio@0x3f1a0000 { - compatible = "bcm,kona-sdhci"; + sdio3: sdio@3f1a0000 { + compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x10000>; interrupts = <0x0 74 0x4>; status = "disabled"; }; - sdio3: sdio@0x3f1b0000 { - compatible = "bcm,kona-sdhci"; + sdio4: sdio@3f1b0000 { + compatible = "brcm,kona-sdhci"; reg = <0x3f1b0000 0x10000>; interrupts = <0x0 73 0x4>; status = "disabled"; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts new file mode 100644 index 0000000000000000000000000000000000000000..96ae67a2f0d37dc9ec852b9c00eba004aa0757fa --- /dev/null +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "bcm11351.dtsi" + +/ { + model = "BCM28155 AP board"; + compatible = "brcm,bcm28155-ap", "brcm,bcm11351"; + + memory { + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + uart@3e000000 { + status = "okay"; + }; + + sdio1: sdio@3f180000 { + max-frequency = <48000000>; + status = "okay"; + }; + + sdio2: sdio@3f190000 { + non-removable; + max-frequency = <48000000>; + status = "okay"; + }; + + sdio4: sdio@3f1b0000 { + max-frequency = <48000000>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/ccu8540.dts b/arch/arm/boot/dts/ccu8540.dts deleted file mode 100644 index 48ff03441f5a1dcc9ba292c5d89176087ac2cf6d..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/ccu8540.dts +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright 2013 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "dbx5x0.dtsi" - -/ { - model = "ST-Ericsson U8540 platform with Device Tree"; - compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; - - memory@0 { - reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; - }; - - soc { - prcmu@80157000 { - reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>; - reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; - }; - - uart@80120000 { - status = "okay"; - }; - - uart@80121000 { - status = "okay"; - }; - - uart@80007000 { - status = "okay"; - }; - }; -}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 5bce7cc55cf35ba6446ff77803f5aa167899aaea..588ce58a2959f0215b3a6c2b16c0c2b6a502b625 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -90,6 +90,17 @@ }; }; }; + mdio: mdio@1e24000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + bus_freq = <2200000>; + }; + eth0: ethernet@1e20000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mii_pins>; + }; }; nand_cs3@62000000 { status = "okay"; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index d70ba5504481d90b796872d4c258061cb8de4b4d..8d17346f9702173184da0b61d217f91fc6a1fff1 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -125,11 +125,33 @@ 0x14 0x00000010 0x000000f0 >; }; + mdio_pins: pinmux_mdio_pins { + pinctrl-single,bits = < + /* MDIO_CLK, MDIO_D */ + 0x10 0x00000088 0x000000ff + >; + }; + mii_pins: pinmux_mii_pins { + pinctrl-single,bits = < + /* + * MII_TXEN, MII_TXCLK, MII_COL + * MII_TXD_3, MII_TXD_2, MII_TXD_1 + * MII_TXD_0 + */ + 0x8 0x88888880 0xfffffff0 + /* + * MII_RXER, MII_CRS, MII_RXCLK + * MII_RXDV, MII_RXD_3, MII_RXD_2 + * MII_RXD_1, MII_RXD_0 + */ + 0xc 0x88888888 0xffffffff + >; + }; + }; serial0: serial@1c42000 { compatible = "ns16550a"; reg = <0x42000 0x100>; - clock-frequency = <150000000>; reg-shift = <2>; interrupts = <25>; status = "disabled"; @@ -137,7 +159,6 @@ serial1: serial@1d0c000 { compatible = "ns16550a"; reg = <0x10c000 0x100>; - clock-frequency = <150000000>; reg-shift = <2>; interrupts = <53>; status = "disabled"; @@ -145,7 +166,6 @@ serial2: serial@1d0d000 { compatible = "ns16550a"; reg = <0x10d000 0x100>; - clock-frequency = <150000000>; reg-shift = <2>; interrupts = <61>; status = "disabled"; @@ -216,6 +236,26 @@ interrupts = <56>; status = "disabled"; }; + mdio: mdio@1e24000 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x224000 0x1000>; + }; + eth0: ethernet@1e20000 { + compatible = "ti,davinci-dm6467-emac"; + reg = <0x220000 0x4000>; + ti,davinci-ctrl-reg-offset = <0x3000>; + ti,davinci-ctrl-mod-reg-offset = <0x2000>; + ti,davinci-ctrl-ram-offset = <0>; + ti,davinci-ctrl-ram-size = <0x2000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <33 + 34 + 35 + 36 + >; + }; }; nand_cs3@62000000 { compatible = "ti,davinci-nand"; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 5cae2ab69762a8298a694b21f1ee71c753a4a60c..022646ef4b3842278f636ed23b6f8c030a1db623 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -42,6 +42,8 @@ regulator-always-on; regulator-boot-on; gpio = <&gpio0 1 0>; + pinctrl-0 = <&pmx_gpio_1>; + pinctrl-names = "default"; }; }; @@ -53,10 +55,24 @@ clock-frequency = <25000000>; }; }; + + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 19 1>; + pinctrl-0 = <&pmx_gpio_19>; + pinctrl-names = "default"; + }; }; &uart0 { status = "okay"; }; &sata0 { status = "okay"; }; +&mdio { status = "okay"; }; +ð { status = "okay"; }; + +ðphy { + compatible = "marvell,88e1310"; + reg = <1>; +}; &i2c0 { status = "okay"; @@ -103,6 +119,7 @@ status = "okay"; /* sdio0 card detect is connected to wrong pin on CuBox */ cd-gpios = <&gpio0 12 1>; + pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>; }; &spi0 { @@ -115,23 +132,3 @@ reg = <0>; }; }; - -&pinctrl { - pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>; - pinctrl-names = "default"; - - pmx_gpio_1: pmx-gpio-1 { - marvell,pins = "mpp1"; - marvell,function = "gpio"; - }; - - pmx_gpio_12: pmx-gpio-12 { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_gpio_18: pmx-gpio-18 { - marvell,pins = "mpp18"; - marvell,function = "gpio"; - }; -}; diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts new file mode 100644 index 0000000000000000000000000000000000000000..e2222ce94f2f2494380d137f70267f942f231646 --- /dev/null +++ b/arch/arm/boot/dts/dove-d2plug.dts @@ -0,0 +1,69 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "Globalscale D2Plug"; + compatible = "globalscale,d2plug", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>; + pinctrl-names = "default"; + + wlan-ap { + label = "wlan-ap"; + gpios = <&gpio0 0 1>; + }; + + wlan-act { + label = "wlan-act"; + gpios = <&gpio0 1 1>; + }; + + bluetooth-act { + label = "bt-act"; + gpios = <&gpio0 2 1>; + }; + }; +}; + +&uart0 { status = "okay"; }; +&sata0 { status = "okay"; }; +&i2c0 { status = "okay"; }; +&mdio { status = "okay"; }; +ð { status = "okay"; }; + +/* Samsung M8G2F eMMC */ +&sdio0 { + status = "okay"; + non-removable; + bus-width = <4>; +}; + +/* Marvell SD8787 WLAN/BT */ +&sdio1 { + status = "okay"; + non-removable; + bus-width = <4>; +}; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Macronix MX25L3205D */ + spi-flash@0 { + compatible = "st,m25l3205d"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 6cab46849cdb471d44b81ddf21f216999c6baeb4..cc279166646fc4cb33751c8de2f1e19de2dd7440 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -10,6 +10,23 @@ gpio2 = &gpio2; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "marvell,pj4a", "marvell,sheeva-v7"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + }; + + l2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0>; + }; + soc@f1000000 { compatible = "simple-bus"; #address-cells = <1>; @@ -25,16 +42,28 @@ 0xf2100000 0xf2100000 0x0100000 /* PCIe0 I/O 1M */ 0xf8000000 0xf8000000 0x8000000>; /* BootROM 128M */ - l2: l2-cache { - compatible = "marvell,tauros2-cache"; - marvell,tauros2-cache-features = <0>; + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; }; - intc: interrupt-controller { + intc: main-interrupt-ctrl@20200 { compatible = "marvell,orion-intc"; interrupt-controller; #interrupt-cells = <1>; - reg = <0x20204 0x04>, <0x20214 0x04>; + reg = <0x20200 0x10>, <0x20210 0x10>; + }; + + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <0>; + marvell,#interrupts = <5>; }; core_clk: core-clocks@d0214 { @@ -43,14 +72,14 @@ #clock-cells = <1>; }; - gate_clk: clock-gating-control@d0038 { + gate_clk: clock-gating-ctrl@d0038 { compatible = "marvell,dove-gating-clock"; reg = <0xd0038 0x4>; clocks = <&core_clk 0>; #clock-cells = <1>; }; - thermal: thermal@d001c { + thermal: thermal-diode@d001c { compatible = "marvell,dove-thermal"; reg = <0xd001c 0x0c>, <0xd005c 0x08>; }; @@ -70,6 +99,8 @@ reg-shift = <2>; interrupts = <8>; clocks = <&core_clk 0>; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; status = "disabled"; }; @@ -91,7 +122,7 @@ status = "disabled"; }; - gpio0: gpio@d0400 { + gpio0: gpio-ctrl@d0400 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; gpio-controller; @@ -102,7 +133,7 @@ interrupts = <12>, <13>, <14>, <60>; }; - gpio1: gpio@d0420 { + gpio1: gpio-ctrl@d0420 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; gpio-controller; @@ -113,7 +144,7 @@ interrupts = <61>; }; - gpio2: gpio@e8400 { + gpio2: gpio-ctrl@e8400 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; gpio-controller; @@ -121,13 +152,188 @@ ngpios = <8>; }; - pinctrl: pinctrl@d0200 { + pinctrl: pin-ctrl@d0200 { compatible = "marvell,dove-pinctrl"; reg = <0xd0200 0x10>; clocks = <&gate_clk 22>; + + pmx_gpio_0: pmx-gpio-0 { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_gpio_1: pmx-gpio-1 { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_gpio_2: pmx-gpio-2 { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_gpio_3: pmx-gpio-3 { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_gpio_4: pmx-gpio-4 { + marvell,pins = "mpp4"; + marvell,function = "gpio"; + }; + + pmx_gpio_5: pmx-gpio-5 { + marvell,pins = "mpp5"; + marvell,function = "gpio"; + }; + + pmx_gpio_6: pmx-gpio-6 { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + + pmx_gpio_7: pmx-gpio-7 { + marvell,pins = "mpp7"; + marvell,function = "gpio"; + }; + + pmx_gpio_8: pmx-gpio-8 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + pmx_gpio_9: pmx-gpio-9 { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + pmx_gpio_10: pmx-gpio-10 { + marvell,pins = "mpp10"; + marvell,function = "gpio"; + }; + + pmx_gpio_11: pmx-gpio-11 { + marvell,pins = "mpp11"; + marvell,function = "gpio"; + }; + + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_gpio_13: pmx-gpio-13 { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_gpio_14: pmx-gpio-14 { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_gpio_15: pmx-gpio-15 { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_gpio_16: pmx-gpio-16 { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_gpio_17: pmx-gpio-17 { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_gpio_18: pmx-gpio-18 { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + + pmx_gpio_19: pmx-gpio-19 { + marvell,pins = "mpp19"; + marvell,function = "gpio"; + }; + + pmx_gpio_20: pmx-gpio-20 { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + + pmx_gpio_21: pmx-gpio-21 { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_camera: pmx-camera { + marvell,pins = "mpp_camera"; + marvell,function = "camera"; + }; + + pmx_camera_gpio: pmx-camera-gpio { + marvell,pins = "mpp_camera"; + marvell,function = "gpio"; + }; + + pmx_sdio0: pmx-sdio0 { + marvell,pins = "mpp_sdio0"; + marvell,function = "sdio0"; + }; + + pmx_sdio0_gpio: pmx-sdio0-gpio { + marvell,pins = "mpp_sdio0"; + marvell,function = "gpio"; + }; + + pmx_sdio1: pmx-sdio1 { + marvell,pins = "mpp_sdio1"; + marvell,function = "sdio1"; + }; + + pmx_sdio1_gpio: pmx-sdio1-gpio { + marvell,pins = "mpp_sdio1"; + marvell,function = "gpio"; + }; + + pmx_audio1_gpio: pmx-audio1-gpio { + marvell,pins = "mpp_audio1"; + marvell,function = "gpio"; + }; + + pmx_spi0: pmx-spi0 { + marvell,pins = "mpp_spi0"; + marvell,function = "spi0"; + }; + + pmx_spi0_gpio: pmx-spi0-gpio { + marvell,pins = "mpp_spi0"; + marvell,function = "gpio"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp_uart1"; + marvell,function = "uart1"; + }; + + pmx_uart1_gpio: pmx-uart1-gpio { + marvell,pins = "mpp_uart1"; + marvell,function = "gpio"; + }; + + pmx_nand: pmx-nand { + marvell,pins = "mpp_nand"; + marvell,function = "nand"; + }; + + pmx_nand_gpo: pmx-nand-gpo { + marvell,pins = "mpp_nand"; + marvell,function = "gpo"; + }; }; - spi0: spi@10600 { + spi0: spi-ctrl@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; @@ -135,10 +341,12 @@ interrupts = <6>; reg = <0x10600 0x28>; clocks = <&core_clk 0>; + pinctrl-0 = <&pmx_spi0>; + pinctrl-names = "default"; status = "disabled"; }; - spi1: spi@14600 { + spi1: spi-ctrl@14600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; @@ -149,7 +357,7 @@ status = "disabled"; }; - i2c0: i2c@11000 { + i2c0: i2c-ctrl@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; @@ -177,23 +385,27 @@ status = "okay"; }; - sdio0: sdio@92000 { + sdio0: sdio-host@92000 { compatible = "marvell,dove-sdhci"; reg = <0x92000 0x100>; interrupts = <35>, <37>; clocks = <&gate_clk 8>; + pinctrl-0 = <&pmx_sdio0>; + pinctrl-names = "default"; status = "disabled"; }; - sdio1: sdio@90000 { + sdio1: sdio-host@90000 { compatible = "marvell,dove-sdhci"; reg = <0x90000 0x100>; interrupts = <36>, <38>; clocks = <&gate_clk 9>; + pinctrl-0 = <&pmx_sdio1>; + pinctrl-names = "default"; status = "disabled"; }; - sata0: sata@a0000 { + sata0: sata-host@a0000 { compatible = "marvell,orion-sata"; reg = <0xa0000 0x2400>; interrupts = <62>; @@ -202,12 +414,12 @@ status = "disabled"; }; - rtc@d8500 { + rtc: real-time-clock@d8500 { compatible = "marvell,orion-rtc"; reg = <0xd8500 0x20>; }; - crypto: crypto@30000 { + crypto: crypto-engine@30000 { compatible = "marvell,orion-crypto"; reg = <0x30000 0x10000>, <0xc8000000 0x800>; @@ -258,5 +470,40 @@ dmacap,xor; }; }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <30>; + clocks = <&gate_clk 2>; + status = "disabled"; + + ethphy: ethernet-phy { + device-type = "ethernet-phy"; + /* set phy address in board file */ + }; + }; + + eth: ethernet-controller@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + clocks = <&gate_clk 2>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet-port@0 { + device_type = "network"; + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <29>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-handle = <ðphy>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts new file mode 100644 index 0000000000000000000000000000000000000000..bed676b95c27fa6a8122702bc95ebffdca925fa0 --- /dev/null +++ b/arch/arm/boot/dts/emev2-kzm9d-reference.dts @@ -0,0 +1,57 @@ +/* + * Device Tree Source for the KZM9D board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +/dts-v1/; + +/include/ "emev2.dtsi" + +/ { + model = "EMEV2 KZM9D Board"; + compatible = "renesas,kzm9d-reference", "renesas,emev2"; + + memory { + device_type = "memory"; + reg = <0x40000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; + }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + lan9220@20000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x20000000 0x10000>; + phy-mode = "mii"; + interrupt-parent = <&gpio0>; + interrupts = <1 1>; /* active high */ + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; +}; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index b9b3241f173b5c9568c3d65c91cf95ad278330ff..dda13bc02f9f81406aa7bd8c732a9c2db62cf359 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -21,6 +21,6 @@ }; chosen { - bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; + bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; }; }; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index c8a8c08b48ddc8608f4686150b6e1280a5f33dd3..99ad2b2e8e140f084596aa52df688260fc07db56 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -14,6 +14,14 @@ compatible = "renesas,emev2"; interrupt-parent = <&gic>; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -67,4 +75,55 @@ reg = <0xe1050000 0x38>; interrupts = <0 11 0>; }; + + gpio0: gpio@e0050000 { + compatible = "renesas,em-gio"; + reg = <0xe0050000 0x2c>, <0xe0050040 0x20>; + interrupts = <0 67 0>, <0 68 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio1: gpio@e0050080 { + compatible = "renesas,em-gio"; + reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>; + interrupts = <0 69 0>, <0 70 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio2: gpio@e0050100 { + compatible = "renesas,em-gio"; + reg = <0xe0050100 0x2c>, <0xe0050140 0x20>; + interrupts = <0 71 0>, <0 72 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio3: gpio@e0050180 { + compatible = "renesas,em-gio"; + reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>; + interrupts = <0 73 0>, <0 74 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio4: gpio@e0050200 { + compatible = "renesas,em-gio"; + reg = <0xe0050200 0x2c>, <0xe0050240 0x20>; + interrupts = <0 75 0>, <0 76 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <31>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 3f94fe8e3706b2fdff261445c0fccdf245ba5f97..93c2501391591ee32130b18ed2d371bffdcff038 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -36,6 +36,12 @@ i2c5 = &i2c_5; i2c6 = &i2c_6; i2c7 = &i2c_7; + csis0 = &csis_0; + csis1 = &csis_1; + fimc0 = &fimc_0; + fimc1 = &fimc_1; + fimc2 = &fimc_2; + fimc3 = &fimc_3; }; chipid@10000000 { @@ -92,6 +98,88 @@ reg = <0x10010000 0x400>; }; + camera { + compatible = "samsung,fimc", "simple-bus"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock_cam: clock-controller { + #clock-cells = <1>; + }; + + fimc_0: fimc@11800000 { + compatible = "samsung,exynos4210-fimc"; + reg = <0x11800000 0x1000>; + interrupts = <0 84 0>; + clocks = <&clock 256>, <&clock 128>; + clock-names = "fimc", "sclk_fimc"; + samsung,power-domain = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + status = "disabled"; + }; + + fimc_1: fimc@11810000 { + compatible = "samsung,exynos4210-fimc"; + reg = <0x11810000 0x1000>; + interrupts = <0 85 0>; + clocks = <&clock 257>, <&clock 129>; + clock-names = "fimc", "sclk_fimc"; + samsung,power-domain = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + status = "disabled"; + }; + + fimc_2: fimc@11820000 { + compatible = "samsung,exynos4210-fimc"; + reg = <0x11820000 0x1000>; + interrupts = <0 86 0>; + clocks = <&clock 258>, <&clock 130>; + clock-names = "fimc", "sclk_fimc"; + samsung,power-domain = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + status = "disabled"; + }; + + fimc_3: fimc@11830000 { + compatible = "samsung,exynos4210-fimc"; + reg = <0x11830000 0x1000>; + interrupts = <0 87 0>; + clocks = <&clock 259>, <&clock 131>; + clock-names = "fimc", "sclk_fimc"; + samsung,power-domain = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + status = "disabled"; + }; + + csis_0: csis@11880000 { + compatible = "samsung,exynos4210-csis"; + reg = <0x11880000 0x4000>; + interrupts = <0 78 0>; + clocks = <&clock 260>, <&clock 134>; + clock-names = "csis", "sclk_csis"; + bus-width = <4>; + samsung,power-domain = <&pd_cam>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + csis_1: csis@11890000 { + compatible = "samsung,exynos4210-csis"; + reg = <0x11890000 0x4000>; + interrupts = <0 80 0>; + clocks = <&clock 261>, <&clock 135>; + clock-names = "csis", "sclk_csis"; + bus-width = <2>; + samsung,power-domain = <&pd_cam>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + watchdog@10060000 { compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; @@ -155,13 +243,31 @@ status = "disabled"; }; + ehci@12580000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12580000 0x100>; + interrupts = <0 70 0>; + clocks = <&clock 304>; + clock-names = "usbhost"; + status = "disabled"; + }; + + ohci@12590000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12590000 0x100>; + interrupts = <0 70 0>; + clocks = <&clock 304>; + clock-names = "usbhost"; + status = "disabled"; + }; + mfc: codec@13400000 { compatible = "samsung,mfc-v5"; reg = <0x13400000 0x10000>; interrupts = <0 94 0>; samsung,power-domain = <&pd_mfc>; - clocks = <&clock 170>, <&clock 273>; - clock-names = "sclk_mfc", "mfc"; + clocks = <&clock 273>; + clock-names = "mfc"; status = "disabled"; }; @@ -297,8 +403,8 @@ compatible = "samsung,exynos4210-spi"; reg = <0x13920000 0x100>; interrupts = <0 66 0>; - tx-dma-channel = <&pdma0 7>; /* preliminary */ - rx-dma-channel = <&pdma0 6>; /* preliminary */ + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clock 327>, <&clock 159>; @@ -312,8 +418,8 @@ compatible = "samsung,exynos4210-spi"; reg = <0x13930000 0x100>; interrupts = <0 67 0>; - tx-dma-channel = <&pdma1 7>; /* preliminary */ - rx-dma-channel = <&pdma1 6>; /* preliminary */ + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clock 328>, <&clock 160>; @@ -327,8 +433,8 @@ compatible = "samsung,exynos4210-spi"; reg = <0x13940000 0x100>; interrupts = <0 68 0>; - tx-dma-channel = <&pdma0 9>; /* preliminary */ - rx-dma-channel = <&pdma0 8>; /* preliminary */ + dmas = <&pdma0 9>, <&pdma0 8>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clock 329>, <&clock 161>; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 553bceae8967cd8bcb211693b1656f6ebbc5f3ca..a7c2128916743b1d0d0dcbd2f373ae4d8ac3b742 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -797,6 +797,29 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + cam_port_a_io: cam-port-a-io { + samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", + "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", + "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a_clk_active: cam-port-a-clk-active { + samsung,pins = "gpj1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_a_clk_idle: cam-port-a-clk-idle { + samsung,pins = "gpj1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; }; pinctrl@03860000 { diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 94eebffe304484e2918ad96fd4bfc1bdf3a3bd61..1c164f234bcca89892c7a05fa3d8012a86cffd22 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -30,13 +30,62 @@ bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; }; - vemmc_reg: voltage-regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 0>; - enable-active-high; + regulators { + compatible = "simple-bus"; + + vemmc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk0 2 0>; + enable-active-high; + }; + + tsp_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "TSP_FIXED_VOLTAGES"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpl0 3 0>; + enable-active-high; + }; + + cam_af_28v_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "8M_AF_2.8V_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk1 1 0>; + enable-active-high; + }; + + cam_io_en_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "CAM_IO_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpe2 1 0>; + enable-active-high; + }; + + cam_io_12v_reg: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "8M_1.2V_EN"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpe2 5 0>; + enable-active-high; + }; + + vt_core_15v_reg: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "VT_CORE_1.5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpe2 2 0>; + enable-active-high; + }; }; sdhci_emmc: sdhci@12510000 { @@ -97,15 +146,6 @@ }; }; - tsp_reg: voltage-regulator { - compatible = "regulator-fixed"; - regulator-name = "TSP_FIXED_VOLTAGES"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpl0 3 0>; - enable-active-high; - }; - i2c@13890000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; @@ -218,6 +258,12 @@ regulator-always-on; }; + vtcam_reg: LDO12 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vcclcd_reg: LDO13 { regulator-name = "VCC_3.3V_LCD"; regulator-min-microvolt = <3300000>; @@ -301,4 +347,26 @@ clock-frequency = <24000000>; }; }; + + camera { + pinctrl-names = "default"; + pinctrl-0 = <>; + status = "okay"; + + fimc_0: fimc@11800000 { + status = "okay"; + }; + + fimc_1: fimc@11810000 { + status = "okay"; + }; + + fimc_2: fimc@11820000 { + status = "okay"; + }; + + fimc_3: fimc@11830000 { + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index b7f358a93bcbe52132f2ba69ef9c55b9525e4125..057d6829d31998632a350ad3fd22a4a7bc639a18 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -72,7 +72,7 @@ }; }; - clock: clock-controller@0x10030000 { + clock: clock-controller@10030000 { compatible = "samsung,exynos4210-clock"; reg = <0x10030000 0x20000>; #clock-cells = <1>; @@ -125,4 +125,34 @@ clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; + + camera { + clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + + fimc_0: fimc@11800000 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc_1: fimc@11810000 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc_2: fimc@11820000 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,lcd-wb; + }; + + fimc_3: fimc@11830000 { + samsung,pix-limits = <1920 8192 1366 1920>; + samsung,rotators = <0>; + samsung,mainscaler-ext; + samsung,lcd-wb; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 7993641cb32a4f8c170793b1964df75d798aa9ed..8768b03702e5a14c3ebf742677a03e0b76082a42 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -27,6 +27,11 @@ bootargs ="console=ttySAC2,115200"; }; + firmware@0203F000 { + compatible = "samsung,secure-firmware"; + reg = <0x0203F000 0x1000>; + }; + mmc_reg: voltage-regulator { compatible = "regulator-fixed"; regulator-name = "VMEM_VDD_2.8V"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts new file mode 100644 index 0000000000000000000000000000000000000000..fb7b9ae5f39992514afe434142cbd3118055a661 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -0,0 +1,579 @@ +/* + * Samsung's Exynos4412 based Trats 2 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's Trats 2 board which is based on + * Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos4412.dtsi" + +/ { + model = "Samsung Trats 2 based on Exynos4412"; + compatible = "samsung,trats2", "samsung,exynos4412"; + + aliases { + i2c8 = &i2c_ak8975; + }; + + memory { + reg = <0x40000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + }; + + firmware@0204F000 { + compatible = "samsung,secure-firmware"; + reg = <0x0204F000 0x1000>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti", "fixed-clock"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vemmc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk0 2 0>; + enable-active-high; + }; + + cam_io_reg: voltage-regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "CAM_SENSOR_A"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpm0 2 0>; + enable-active-high; + }; + + /* More to come */ + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-down { + interrupt-parent = <&gpj1>; + interrupts = <2 0>; + gpios = <&gpj1 2 1>; + linux,code = <114>; + label = "volume down"; + debounce-interval = <10>; + }; + + key-up { + interrupt-parent = <&gpj1>; + interrupts = <1 0>; + gpios = <&gpj1 1 1>; + linux,code = <115>; + label = "volume up"; + debounce-interval = <10>; + }; + + key-power { + interrupt-parent = <&gpx2>; + interrupts = <7 0>; + gpios = <&gpx2 7 1>; + linux,code = <116>; + label = "power"; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + i2c@13890000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpm2>; + interrupts = <3 2>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&ldo23_reg>; + vdd-supply = <&ldo24_reg>; + }; + }; + + i2c@138D0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + status = "okay"; + + max77686_pmic@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx0>; + interrupts = <7 0>; + reg = <0x09>; + + voltage-regulators { + ldo1_reg: ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "VALIVE_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo2_reg: ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "VM1M2_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo3_reg: ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "VCC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo4_reg: ldo4 { + regulator-compatible = "LDO4"; + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo5_reg: ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "VCC_1.8V_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo6_reg: ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "VMPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo7_reg: ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "VPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo8_reg: ldo8 { + regulator-compatible = "LDO8"; + regulator-name = "VMIPI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-mem-off; + }; + + ldo9_reg: ldo9 { + regulator-compatible = "LDO9"; + regulator-name = "CAM_ISP_MIPI_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-mem-idle; + }; + + ldo10_reg: ldo10 { + regulator-compatible = "LDO10"; + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-off; + }; + + ldo11_reg: ldo11 { + regulator-compatible = "LDO11"; + regulator-name = "VABB1_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-mem-off; + }; + + ldo12_reg: ldo12 { + regulator-compatible = "LDO12"; + regulator-name = "VUOTG_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-mem-off; + }; + + ldo13_reg: ldo13 { + regulator-compatible = "LDO13"; + regulator-name = "NFC_AVDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo14_reg: ldo14 { + regulator-compatible = "LDO14"; + regulator-name = "VABB2_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-mem-off; + }; + + ldo15_reg: ldo15 { + regulator-compatible = "LDO15"; + regulator-name = "VHSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-mem-off; + }; + + ldo16_reg: ldo16 { + regulator-compatible = "LDO16"; + regulator-name = "VHSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-off; + }; + + ldo17_reg: ldo17 { + regulator-compatible = "LDO17"; + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-mem-idle; + }; + + ldo18_reg: ldo18 { + regulator-compatible = "LDO18"; + regulator-name = "CAM_ISP_SEN_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo19_reg: ldo19 { + regulator-compatible = "LDO19"; + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo20_reg: ldo20 { + regulator-compatible = "LDO20"; + regulator-name = "VDDQ_PRE_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo21_reg: ldo21 { + regulator-compatible = "LDO21"; + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-mem-idle; + }; + + ldo22_reg: ldo22 { + regulator-compatible = "LDO22"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-mem-off; + }; + + ldo23_reg: ldo23 { + regulator-compatible = "LDO23"; + regulator-name = "TSP_AVDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-mem-idle; + }; + + ldo24_reg: ldo24 { + regulator-compatible = "LDO24"; + regulator-name = "TSP_VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo25_reg: ldo25 { + regulator-compatible = "LDO25"; + regulator-name = "LCD_VCC_3.3V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-mem-idle; + }; + + ldo26_reg: ldo26 { + regulator-compatible = "LDO26"; + regulator-name = "MOTOR_VCC_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-mem-idle; + }; + + buck1_reg: buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "vdd_mif"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-mem-off; + }; + + buck2_reg: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-mem-off; + }; + + buck3_reg: buck3 { + regulator-compatible = "BUCK3"; + regulator-name = "vdd_int"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + regulator-mem-off; + }; + + buck4_reg: buck4 { + regulator-compatible = "BUCK4"; + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-mem-off; + }; + + buck5_reg: buck5 { + regulator-compatible = "BUCK5"; + regulator-name = "VMEM_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck6_reg: buck6 { + regulator-compatible = "BUCK6"; + regulator-name = "VCC_SUB_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: buck7 { + regulator-compatible = "BUCK7"; + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: buck8 { + regulator-compatible = "BUCK8"; + regulator-name = "VMEM_VDDF_3.0V"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-mem-off; + }; + + buck9_reg: buck9 { + regulator-compatible = "BUCK9"; + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + regulator-mem-off; + }; + }; + }; + }; + + sdhci@12510000 { + bus-width = <8>; + non-removable; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; + pinctrl-names = "default"; + vmmc-supply = <&vemmc_reg>; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + + i2c_ak8975: i2c-gpio-0 { + compatible = "i2c-gpio"; + gpios = <&gpy2 4 0>, <&gpy2 5 0>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ak8975@0c { + compatible = "ak,ak8975"; + reg = <0x0c>; + gpios = <&gpj0 7 0>; + }; + }; + + spi_1: spi@13930000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + status = "okay"; + + s5c73m3_spi: s5c73m3 { + compatible = "samsung,s5c73m3"; + spi-max-frequency = <50000000>; + reg = <0>; + controller-data { + cs-gpio = <&gpb 5 0>; + samsung,spi-feedback-delay = <2>; + }; + }; + }; + + camera { + pinctrl-0 = <&cam_port_b_clk_active>; + pinctrl-names = "default"; + status = "okay"; + + fimc_0: fimc@11800000 { + status = "okay"; + }; + + fimc_1: fimc@11810000 { + status = "okay"; + }; + + fimc_2: fimc@11820000 { + status = "okay"; + }; + + fimc_3: fimc@11830000 { + status = "okay"; + }; + + csis_1: csis@11890000 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + clock-frequency = <160000000>; + status = "okay"; + + /* Camera D (4) MIPI CSI-2 (CSIS1) */ + port@4 { + reg = <4>; + csis1_ep: endpoint { + remote-endpoint = <&is_s5k6a3_ep>; + data-lanes = <1>; + samsung,csis-hs-settle = <18>; + samsung,csis-wclk; + }; + }; + }; + + fimc_lite_0: fimc-lite@12390000 { + status = "okay"; + }; + + fimc_lite_1: fimc-lite@123A0000 { + status = "okay"; + }; + + fimc-is@12000000 { + pinctrl-0 = <&fimc_is_uart>; + pinctrl-names = "default"; + status = "okay"; + + i2c1_isp: i2c-isp@12140000 { + pinctrl-0 = <&fimc_is_i2c1>; + pinctrl-names = "default"; + + s5k6a3@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + svdda-supply = <&cam_io_reg>; + svddio-supply = <&ldo19_reg>; + clock-frequency = <24000000>; + /* CAM_B_CLKOUT */ + clocks = <&clock_cam 1>; + clock-names = "mclk"; + samsung,camclk-out = <1>; + gpios = <&gpm1 6 0>; + + port { + is_s5k6a3_ep: endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 704290f7c5c099243957ccfd8cccbd25448b88b1..99b26df8dbc7e381effb4f17d86984ba633ce783 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -401,13 +401,26 @@ samsung,pin-drv = <0>; }; - cam_port_a: cam-port-a { + cam_port_a_io: cam-port-a-io { samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", - "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3", - "gpj1-4"; + "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; samsung,pin-function = <2>; - samsung,pin-pud = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a_clk_active: cam-port-a-clk-active { + samsung,pins = "gpj1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_a_clk_idle: cam-port-a-clk-idle { + samsung,pins = "gpj1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; samsung,pin-drv = <0>; }; }; @@ -778,16 +791,29 @@ samsung,pin-drv = <3>; }; - cam_port_b: cam-port-b { + cam_port_b_io: cam-port-b-io { samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", - "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1", - "gpm2-2"; + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <0>; }; + cam_port_b_clk_active: cam-port-b-clk-active { + samsung,pins = "gpm2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_b_clk_idle: cam-port-b-clk-idle { + samsung,pins = "gpm2-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + eint0: ext-int0 { samsung,pins = "gpx0-0"; samsung,pin-function = <0xf>; @@ -822,6 +848,27 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + fimc_is_i2c0: fimc-is-i2c0 { + samsung,pins = "gpm4-0", "gpm4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c1: fimc-is-i2c1 { + samsung,pins = "gpm4-2", "gpm4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_uart: fimc-is-uart { + samsung,pins = "gpm3-5", "gpm3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; pinctrl@03860000 { diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 01da194ba329c8dd070ebfb0368fbee16dd1f2ab..ad531fe6ab9528fdfcca50635bc4c833651db15b 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -26,9 +26,16 @@ pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; pinctrl3 = &pinctrl_3; + fimc-lite0 = &fimc_lite_0; + fimc-lite1 = &fimc_lite_1; }; - clock: clock-controller@0x10030000 { + pd_isp: isp-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + }; + + clock: clock-controller@10030000 { compatible = "samsung,exynos4412-clock"; reg = <0x10030000 0x20000>; #clock-cells = <1>; @@ -73,4 +80,100 @@ clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; + + camera { + clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + + fimc_0: fimc@11800000 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; + }; + + fimc_1: fimc@11810000 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; + }; + + fimc_2: fimc@11820000 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; + samsung,cam-if; + }; + + fimc_3: fimc@11830000 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <1920 8192 1366 1920>; + samsung,rotators = <0>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; + }; + + fimc_lite_0: fimc-lite@12390000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x12390000 0x1000>; + interrupts = <0 105 0>; + samsung,power-domain = <&pd_isp>; + clocks = <&clock 353>; + clock-names = "flite"; + status = "disabled"; + }; + + fimc_lite_1: fimc-lite@123A0000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x123A0000 0x1000>; + interrupts = <0 106 0>; + samsung,power-domain = <&pd_isp>; + clocks = <&clock 354>; + clock-names = "flite"; + status = "disabled"; + }; + + fimc_is: fimc-is@12000000 { + compatible = "samsung,exynos4212-fimc-is", "simple-bus"; + reg = <0x12000000 0x260000>; + interrupts = <0 90 0>, <0 95 0>; + samsung,power-domain = <&pd_isp>; + clocks = <&clock 353>, <&clock 354>, <&clock 355>, + <&clock 356>, <&clock 17>, <&clock 357>, + <&clock 358>, <&clock 359>, <&clock 360>, + <&clock 450>,<&clock 451>, <&clock 452>, + <&clock 453>, <&clock 176>, <&clock 13>, + <&clock 454>, <&clock 395>, <&clock 455>; + clock-names = "lite0", "lite1", "ppmuispx", + "ppmuispmx", "mpll", "isp", + "drc", "fd", "mcuisp", + "ispdiv0", "ispdiv1", "mcuispdiv0", + "mcuispdiv1", "uart", "aclk200", + "div_aclk200", "aclk400mcuisp", + "div_aclk400mcuisp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + pmu { + reg = <0x10020000 0x3000>; + }; + + i2c1_isp: i2c-isp@12140000 { + compatible = "samsung,exynos4212-i2c-isp"; + reg = <0x12140000 0x100>; + clocks = <&clock 370>; + clock-names = "i2c_isp"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index f65e124c04a6901699823d72b7f372a178377f92..6afa57d2feccb15a35a0155e5d5a47dcb6e336f3 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -108,4 +108,23 @@ interrupts = <0 42 0>; status = "disabled"; }; + + fimd@14400000 { + compatible = "samsung,exynos5250-fimd"; + interrupt-parent = <&combiner>; + reg = <0x14400000 0x40000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <18 4>, <18 5>, <18 6>; + status = "disabled"; + }; + + dp-controller@145B0000 { + compatible = "samsung,exynos5-dp"; + reg = <0x145B0000 0x1000>; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index abc7272c7afd3be2a5b7875a3dcb180dd0c478d8..452d0b04d273274e6380e1712089e16e42f824ce 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5250.dtsi" +#include / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -37,6 +38,28 @@ s5m8767_pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + vinb1-supply = <&main_dc_reg>; + vinb2-supply = <&main_dc_reg>; + vinb3-supply = <&main_dc_reg>; + vinb4-supply = <&main_dc_reg>; + vinb5-supply = <&main_dc_reg>; + vinb6-supply = <&main_dc_reg>; + vinb7-supply = <&main_dc_reg>; + vinb8-supply = <&main_dc_reg>; + vinb9-supply = <&main_dc_reg>; + + vinl1-supply = <&buck7_reg>; + vinl2-supply = <&buck7_reg>; + vinl3-supply = <&buck7_reg>; + vinl4-supply = <&main_dc_reg>; + vinl5-supply = <&main_dc_reg>; + vinl6-supply = <&main_dc_reg>; + vinl7-supply = <&main_dc_reg>; + vinl8-supply = <&buck8_reg>; + vinl9-supply = <&buck8_reg>; s5m8767,pmic-buck2-dvs-voltage = <1300000>; s5m8767,pmic-buck3-dvs-voltage = <1100000>; @@ -276,6 +299,16 @@ op_mode = <1>; }; + buck7_reg: BUCK7 { + regulator-name = "PVDD_BUCK7"; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "PVDD_BUCK8"; + regulator-always-on; + }; + buck9_reg: BUCK9 { regulator-name = "VDD_33_OFF_EXT1"; regulator-min-microvolt = <750000>; @@ -295,7 +328,22 @@ }; i2c@12C90000 { - status = "disabled"; + wm1811a@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + + AVDD2-supply = <&main_dc_reg>; + CPVDD-supply = <&main_dc_reg>; + DBVDD1-supply = <&main_dc_reg>; + DBVDD2-supply = <&main_dc_reg>; + DBVDD3-supply = <&main_dc_reg>; + LDO1VDD-supply = <&main_dc_reg>; + SPKVDD1-supply = <&main_dc_reg>; + SPKVDD2-supply = <&main_dc_reg>; + + wlf,ldo1ena = <&gpb0 0 0>; + wlf,ldo2ena = <&gpb0 1 0>; + }; }; i2c@12CA0000 { @@ -429,18 +477,29 @@ vdd-supply = <&ldo8_reg>; }; - mmc_reg: voltage-regulator { - compatible = "regulator-fixed"; - regulator-name = "VDD_33ON_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 1>; - enable-active-high; - }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; - reg_hdmi_en: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "hdmi-en"; + main_dc_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "MAIN_DC"; + }; + + mmc_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDD_33ON_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 1>; + enable-active-high; + }; + + reg_hdmi_en: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "hdmi-en"; + }; }; fixed-rate-clocks { @@ -450,16 +509,18 @@ }; }; - dp-controller { + dp-controller@145B0000 { samsung,color-space = <0>; samsung,dynamic-range = <0>; samsung,ycbcr-coeff = <0>; samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <4>; + status = "okay"; }; fimd: fimd@14400000 { + status = "okay"; display-timings { native-mode = <&timing0>; timing0: timing@0 { @@ -480,4 +541,22 @@ rtc { status = "okay"; }; + + usb_hub_bus { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + // SMSC USB3503 connected in hardware only mode as a PHY + usb_hub: usb_hub { + compatible = "smsc,usb3503a"; + + reset-gpios = <&gpx3 5 1>; + connect-gpios = <&gpd1 7 1>; + }; + }; + + usb@12110000 { + usb-phy = <&usb2_phy>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 49f18c24a576f79996245698bbec5c4850159fa8..2538b329f2cea5367f1517c37673cc77d3e13d3d 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -250,7 +250,7 @@ samsung,vbus-gpio = <&gpx2 6 0>; }; - dp-controller { + dp-controller@145B0000 { samsung,color-space = <0>; samsung,dynamic-range = <0>; samsung,ycbcr-coeff = <0>; @@ -260,21 +260,25 @@ pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; + status = "okay"; }; - display-timings { - native-mode = <&timing0>; - timing0: timing@0 { - /* 1280x800 */ - clock-frequency = <50000>; - hactive = <1280>; - vactive = <800>; - hfront-porch = <4>; - hback-porch = <4>; - hsync-len = <4>; - vback-porch = <4>; - vfront-porch = <4>; - vsync-len = <4>; + fimd@14400000 { + status = "okay"; + display-timings { + native-mode = <&timing0>; + timing0: timing@0 { + /* 1280x800 */ + clock-frequency = <50000>; + hactive = <1280>; + vactive = <800>; + hfront-porch = <4>; + hback-porch = <4>; + hsync-len = <4>; + vback-porch = <4>; + vfront-porch = <4>; + vsync-len = <4>; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index ef57277fc38fa4b79262dd056a896fe6c92c77cb..f7e2d3493f82d556fd66b88fd6bc6a3549300b5e 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -68,17 +68,17 @@ }; }; - pd_gsc: gsc-power-domain@0x10044000 { + pd_gsc: gsc-power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; }; - pd_mfc: mfc-power-domain@0x10044040 { + pd_mfc: mfc-power-domain@10044040 { compatible = "samsung,exynos4210-pd"; reg = <0x10044040 0x20>; }; - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5250-clock"; reg = <0x10010000 0x30000>; #clock-cells = <1>; @@ -163,11 +163,21 @@ clock-names = "watchdog"; }; + g2d@10850000 { + compatible = "samsung,exynos5250-g2d"; + reg = <0x10850000 0x1000>; + interrupts = <0 91 0>; + clocks = <&clock 345>; + clock-names = "fimg2d"; + }; + codec@11000000 { compatible = "samsung,mfc-v6"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; samsung,power-domain = <&pd_mfc>; + clocks = <&clock 266>; + clock-names = "mfc"; }; rtc { @@ -405,7 +415,7 @@ }; i2s0: i2s@03830000 { - compatible = "samsung,i2s-v5"; + compatible = "samsung,s5pv210-i2s"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 &pdma0 9 @@ -415,16 +425,13 @@ <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_SCLK_I2S>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - samsung,supports-6ch; - samsung,supports-rstclr; - samsung,supports-secdai; samsung,idma-addr = <0x03000000>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; }; i2s1: i2s@12D60000 { - compatible = "samsung,i2s-v5"; + compatible = "samsung,s3c6410-i2s"; reg = <0x12D60000 0x100>; dmas = <&pdma1 12 &pdma1 11>; @@ -436,7 +443,7 @@ }; i2s2: i2s@12D70000 { - compatible = "samsung,i2s-v5"; + compatible = "samsung,s3c6410-i2s"; reg = <0x12D70000 0x100>; dmas = <&pdma0 12 &pdma0 11>; @@ -562,7 +569,7 @@ }; }; - gsc_0: gsc@0x13e00000 { + gsc_0: gsc@13e00000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = <0 85 0>; @@ -571,7 +578,7 @@ clock-names = "gscl"; }; - gsc_1: gsc@0x13e10000 { + gsc_1: gsc@13e10000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = <0 86 0>; @@ -580,7 +587,7 @@ clock-names = "gscl"; }; - gsc_2: gsc@0x13e20000 { + gsc_2: gsc@13e20000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e20000 0x1000>; interrupts = <0 87 0>; @@ -589,7 +596,7 @@ clock-names = "gscl"; }; - gsc_3: gsc@0x13e30000 { + gsc_3: gsc@13e30000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e30000 0x1000>; interrupts = <0 88 0>; @@ -614,28 +621,20 @@ interrupts = <0 94 0>; }; - dp-controller { - compatible = "samsung,exynos5-dp"; - reg = <0x145b0000 0x1000>; - interrupts = <10 3>; - interrupt-parent = <&combiner>; + dp_phy: video-phy@10040720 { + compatible = "samsung,exynos5250-dp-video-phy"; + reg = <0x10040720 4>; + #phy-cells = <0>; + }; + + dp-controller@145B0000 { clocks = <&clock 342>; clock-names = "dp"; - #address-cells = <1>; - #size-cells = <0>; - - dptx-phy { - reg = <0x10040720>; - samsung,enable-mask = <1>; - }; + phys = <&dp_phy>; + phy-names = "dp"; }; - fimd { - compatible = "samsung,exynos5250-fimd"; - interrupt-parent = <&combiner>; - reg = <0x14400000 0x40000>; - interrupt-names = "fifo", "vsync", "lcd_sys"; - interrupts = <18 4>, <18 5>, <18 6>; + fimd@14400000 { clocks = <&clock 133>, <&clock 339>; clock-names = "sclk_fimd", "fimd"; }; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index 5848c425ae4d40fcb1c9edd46dfef3827df2f193..e695aba5f73c4d75527c5d0fb33c7a671bb58006 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -59,6 +59,13 @@ interrupt-controller; #interrupt-cells = <2>; }; + + dp_hpd: dp_hpd { + samsung,pins = "gpx0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; }; pinctrl@13410000 { diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 08607df6a180904d47b864619a06e48f088bfb8e..bafba25ba7c29f44adba081b8bea245aa3d4b11a 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -30,4 +30,35 @@ clock-frequency = <24000000>; }; }; + + dp-controller@145B0000 { + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + status = "okay"; + }; + + fimd@14400000 { + status = "okay"; + display-timings { + native-mode = <&timing0>; + timing0: timing@0 { + clock-frequency = <50000>; + hactive = <2560>; + vactive = <1600>; + hfront-porch = <48>; + hback-porch = <80>; + hsync-len = <32>; + vback-porch = <16>; + vfront-porch = <8>; + vsync-len = <6>; + }; + }; + }; + }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 8c54c4b74f0e5817bbc79dfaf924108a7ea70c0e..5353e32897a444a4f5d13a0bc7174c49fdcf4fca 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -14,7 +14,10 @@ */ #include "exynos5.dtsi" -/include/ "exynos5420-pinctrl.dtsi" +#include "exynos5420-pinctrl.dtsi" + +#include + / { compatible = "samsung,exynos5420"; @@ -59,12 +62,28 @@ }; }; - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5420-clock"; reg = <0x10010000 0x30000>; #clock-cells = <1>; }; + clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5420-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + clocks = <&clock 148>; + clock-names = "sclk_audio"; + }; + + codec@11000000 { + compatible = "samsung,mfc-v7"; + reg = <0x11000000 0x10000>; + interrupts = <0 96 0>; + clocks = <&clock 401>; + clock-names = "mfc"; + }; + mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; @@ -90,6 +109,41 @@ }; }; + gsc_pd: power-domain@10044000 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044000 0x20>; + }; + + isp_pd: power-domain@10044020 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044020 0x20>; + }; + + mfc_pd: power-domain@10044060 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044060 0x20>; + }; + + disp_pd: power-domain@100440C0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440C0 0x20>; + }; + + mau_pd: power-domain@100440E0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440E0 0x20>; + }; + + g2d_pd: power-domain@10044100 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044100 0x20>; + }; + + msc_pd: power-domain@10044120 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044120 0x20>; + }; + pinctrl_0: pinctrl@13400000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x13400000 0x1000>; @@ -145,4 +199,23 @@ clocks = <&clock 260>, <&clock 131>; clock-names = "uart", "clk_uart_baud0"; }; + + dp_phy: video-phy@10040728 { + compatible = "samsung,exynos5250-dp-video-phy"; + reg = <0x10040728 4>; + #phy-cells = <0>; + }; + + dp-controller@145B0000 { + clocks = <&clock 412>; + clock-names = "dp"; + phys = <&dp_phy>; + phy-names = "dp"; + }; + + fimd@14400000 { + samsung,power-domain = <&disp_pd>; + clocks = <&clock 147>, <&clock 421>; + clock-names = "sclk_fimd", "fimd"; + }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index ff7f5d8558453f7722e241bc8ba2dcef5120751c..5d6cf4965d6eb3c7db9b2b4f8d4724e2824d2b0d 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -18,9 +18,12 @@ aliases { spi0 = &spi_0; + tmuctrl0 = &tmuctrl_0; + tmuctrl1 = &tmuctrl_1; + tmuctrl2 = &tmuctrl_2; }; - clock: clock-controller@0x160000 { + clock: clock-controller@160000 { compatible = "samsung,exynos5440-clock"; reg = <0x160000 0x1000>; #clock-cells = <1>; @@ -207,6 +210,30 @@ clock-names = "rtc"; }; + tmuctrl_0: tmuctrl@160118 { + compatible = "samsung,exynos5440-tmu"; + reg = <0x160118 0x230>, <0x160368 0x10>; + interrupts = <0 58 0>; + clocks = <&clock 21>; + clock-names = "tmu_apbif"; + }; + + tmuctrl_1: tmuctrl@16011C { + compatible = "samsung,exynos5440-tmu"; + reg = <0x16011C 0x230>, <0x160368 0x10>; + interrupts = <0 58 0>; + clocks = <&clock 21>; + clock-names = "tmu_apbif"; + }; + + tmuctrl_2: tmuctrl@160120 { + compatible = "samsung,exynos5440-tmu"; + reg = <0x160120 0x230>, <0x160368 0x10>; + interrupts = <0 58 0>; + clocks = <&clock 21>; + clock-names = "tmu_apbif"; + }; + sata@210000 { compatible = "snps,exynos5440-ahci"; reg = <0x210000 0x10000>; @@ -248,6 +275,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 53>; + num-lanes = <4>; }; pcie@2a0000 { @@ -267,5 +295,6 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 56>; + num-lanes = <4>; }; }; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index da0588a041317f91c20a384c8cce6794b0d1d4df..185c7c01102ad755541e420faa77ee708fdab498 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -90,6 +90,11 @@ }; apbx@80040000 { + lradc@80050000 { + status = "okay"; + fsl,lradc-touchscreen-wires = <4>; + }; + pwm: pwm@80064000 { pinctrl-names = "default"; pinctrl-0 = <&pwm2_pins_a>; @@ -107,6 +112,16 @@ pinctrl-0 = <&duart_pins_a>; status = "okay"; }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index d107c4af321ff374807ba7a1486d54816be708a0..fc766ae12e24526fcbb5e0e79508acd3a0721f51 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -69,6 +69,10 @@ }; apbx@80040000 { + lradc@80050000 { + status = "okay"; + }; + duart: serial@80070000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 587ceef81e45a5eeb6cb6da0ff5f643f29892669..28b5ce289662b8c74955ecb38e023a6b773cb7b0 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -20,6 +20,8 @@ gpio2 = &gpio2; serial0 = &auart0; serial1 = &auart1; + spi0 = &ssp0; + spi1 = &ssp1; }; cpus { @@ -76,23 +78,21 @@ #size-cells = <1>; reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; - interrupts = <13>, <56>; - interrupt-names = "gpmi-dma", "bch"; + interrupts = <56>; + interrupt-names = "bch"; clocks = <&clks 34>; clock-names = "gpmi_io"; dmas = <&dma_apbh 4>; dma-names = "rx-tx"; - fsl,gpmi-dma-channel = <4>; status = "disabled"; }; ssp0: ssp@80010000 { reg = <0x80010000 0x2000>; - interrupts = <15 14>; + interrupts = <15>; clocks = <&clks 33>; dmas = <&dma_apbh 1>; dma-names = "rx-tx"; - fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -366,11 +366,10 @@ ssp1: ssp@80034000 { reg = <0x80034000 0x2000>; - interrupts = <2 20>; + interrupts = <2>; clocks = <&clks 33>; dmas = <&dma_apbh 2>; dma-names = "rx-tx"; - fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -472,7 +471,7 @@ auart0: serial@8006c000 { compatible = "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; - interrupts = <24 25 23>; + interrupts = <24>; clocks = <&clks 32>; dmas = <&dma_apbx 6>, <&dma_apbx 7>; dma-names = "rx", "tx"; @@ -482,7 +481,7 @@ auart1: serial@8006e000 { compatible = "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; - interrupts = <59 60 58>; + interrupts = <59>; clocks = <&clks 32>; dmas = <&dma_apbx 8>, <&dma_apbx 9>; dma-names = "rx", "tx"; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 701153992c695bb5455c8cdfc13d1a796f3ceebd..737ed5da8f715fec5180c60a6bdd33e9c6fefc9a 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -13,19 +13,35 @@ / { aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; + spi0 = &spi1; + spi1 = &spi2; + spi2 = &spi3; usb0 = &usbotg; usb1 = &usbhost1; }; + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + }; + }; + asic: asic-interrupt-controller@68000000 { compatible = "fsl,imx25-asic", "fsl,avic"; interrupt-controller; @@ -377,7 +393,8 @@ status = "disabled"; }; - lcdc@53fbc000 { + lcdc: lcdc@53fbc000 { + compatible = "fsl,imx25-fb", "fsl,imx21-fb"; reg = <0x53fbc000 0x4000>; interrupts = <39>; clocks = <&clks 103>, <&clks 66>, <&clks 49>; @@ -424,6 +441,7 @@ reg = <0x53fd4000 0x4000>; clocks = <&clks 112>, <&clks 68>; clock-names = "ipg", "ahb"; + #dma-cells = <3>; interrupts = <34>; }; @@ -444,6 +462,13 @@ interrupts = <26>; }; + iim: iim@53ff0000 { + compatible = "fsl,imx25-iim", "fsl,imx27-iim"; + reg = <0x53ff0000 0x4000>; + interrupts = <19>; + clocks = <&clks 99>; + }; + usbphy1: usbphy@1 { compatible = "nop-usbphy"; status = "disabled"; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index 66b8e1c1b0be2a47b2588869a165591f34c11b43..2a377ca1881a9a40004a951a1a8310a02d434727 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -53,6 +53,11 @@ &i2c1 { clock-frequency = <400000>; status = "okay"; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; }; &i2c2 { diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts new file mode 100644 index 0000000000000000000000000000000000000000..5a31c776513f5705e94a5f1a5f306740e898c201 --- /dev/null +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -0,0 +1,93 @@ +/* + * Copyright 2012 Markus Pargmann, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx27-phytec-phycard-s-som.dts" + +/ { + model = "Phytec pca100 rapid development kit"; + compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27"; + + display: display { + model = "Primeview-PD050VL1"; + native-mode = <&timing0>; + bits-per-pixel = <16>; /* non-standard but required */ + fsl,pcr = <0xf0c88080>; /* non-standard but required */ + display-timings { + timing0: 640x480 { + hactive = <640>; + vactive = <480>; + hback-porch = <112>; + hfront-porch = <36>; + hsync-len = <32>; + vback-porch = <33>; + vfront-porch = <33>; + vsync-len = <2>; + clock-frequency = <25000000>; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3v3: 3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&fb { + display = <&display>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + adc@64 { + compatible = "maxim,max1037"; + vcc-supply = <®_3v3>; + reg = <0x64>; + }; +}; + +&owire { + status = "okay"; +}; + +&sdhci2 { + cd-gpios = <&gpio3 29 0>; + status = "okay"; +}; + +&uart1 { + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + fsl,uart-has-rtscts; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts new file mode 100644 index 0000000000000000000000000000000000000000..c8d57d1d074362e14c91113cc8cbf42079724ffe --- /dev/null +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts @@ -0,0 +1,44 @@ +/* + * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar + * and Markus Pargmann, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx27.dtsi" + +/ { + model = "Phytec pca100"; + compatible = "phytec,imx27-pca100", "fsl,imx27"; + + memory { + reg = <0xa0000000 0x08000000>; /* 128MB */ + }; +}; + +&cspi1 { + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio4 28 0>, + <&gpio4 27 0>; + status = "okay"; +}; + +&fec { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + at24@52 { + compatible = "at,24c32"; + pagesize = <32>; + reg = <0x52>; + }; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index e7ed9786920a75121327b75fdd216aa90aa25fd9..0fc6551786c6817216045c8ddfc86a6c5790d58e 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -35,3 +35,16 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&weim { + can@d4000000 { + compatible = "nxp,sja1000"; + reg = <4 0x00000000 0x00000100>; + interrupt-parent = <&gpio5>; + interrupts = <19 0x2>; + nxp,external-clock-frequency = <16000000>; + nxp,tx-output-config = <0x16>; + nxp,no-comparator-bypass; + fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>; + }; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts index f0105651869d65efdef1c27c42133e477337a09c..4ec402c389457f6e5416dc573459127fd4128de7 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts @@ -17,49 +17,22 @@ compatible = "phytec,imx27-pcm038", "fsl,imx27"; memory { - reg = <0x0 0x0>; + reg = <0xa0000000 0x08000000>; }; +}; - soc { - aipi@10000000 { /* aipi1 */ - serial@1000a000 { - status = "okay"; - }; - - i2c@1001d000 { - clock-frequency = <400000>; - status = "okay"; - at24@52 { - compatible = "at,24c32"; - pagesize = <32>; - reg = <0x52>; - }; - pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - lm75@4a { - compatible = "national,lm75"; - reg = <0x4a>; - }; - }; - }; +&audmux { + status = "okay"; - aipi@10020000 { /* aipi2 */ - ethernet@1002b000 { - phy-reset-gpios = <&gpio3 30 0>; - status = "okay"; - }; - }; + /* SSI0 <=> PINS_4 (MC13783 Audio) */ + ssi0 { + fsl,audmux-port = <0>; + fsl,port-config = <0xcb205000>; }; - nor_flash@c0000000 { - compatible = "cfi-flash"; - bank-width = <2>; - reg = <0xc0000000 0x02000000>; - linux,mtd-name = "physmap-flash.0"; - #address-cells = <1>; - #size-cells = <1>; + pins4 { + fsl,audmux-port = <2>; + fsl,port-config = <0x00001000>; }; }; @@ -80,28 +53,16 @@ fsl,mc13xxx-uses-rtc; regulators { - sw1a_reg: sw1a { + /* SW1A and SW1B joined operation */ + sw1_reg: sw1a { regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1520000>; regulator-always-on; regulator-boot-on; }; - sw1b_reg: sw1b { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - sw2a_reg: sw2a { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - sw2b_reg: sw2b { + /* SW2A and SW2B joined operation */ + sw2_reg: sw2a { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -172,8 +133,62 @@ }; }; +&fec { + phy-reset-gpios = <&gpio3 30 0>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + at24@52 { + compatible = "at,24c32"; + pagesize = <32>; + reg = <0x52>; + }; + + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + lm75@4a { + compatible = "national,lm75"; + reg = <0x4a>; + }; +}; + &nfc { nand-bus-width = <8>; nand-ecc-mode = "hw"; status = "okay"; }; + +&uart1 { + status = "okay"; +}; + +&weim { + status = "okay"; + + nor: nor@c0000000 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x02000000>; + bank-width = <2>; + linux,mtd-name = "physmap-flash.0"; + fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>; + #address-cells = <1>; + #size-cells = <1>; + }; + + sram: sram@c8000000 { + compatible = "mtd-ram"; + reg = <1 0x00000000 0x00800000>; + bank-width = <2>; + linux,mtd-name = "mtd-ram.0"; + fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 0695264ddf1b4bd7cf87b0c0f5dec096a744dbbc..c037c223619a7a9ced403c88f1146fb20c112378 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -13,25 +13,27 @@ / { aliases { - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; - serial5 = &uart6; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; gpio3 = &gpio4; gpio4 = &gpio5; gpio5 = &gpio6; + i2c0 = &i2c1; + i2c1 = &i2c2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; spi0 = &cspi1; spi1 = &cspi2; spi2 = &cspi3; }; - avic: avic-interrupt-controller@e0000000 { - compatible = "fsl,imx27-avic", "fsl,avic"; + aitc: aitc-interrupt-controller@e0000000 { + compatible = "fsl,imx27-aitc", "fsl,avic"; interrupt-controller; #interrupt-cells = <1>; reg = <0x10040000 0x1000>; @@ -47,11 +49,29 @@ }; }; + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu: cpu@0 { + device_type = "cpu"; + compatible = "arm,arm926ej-s"; + operating-points = < + /* kHz uV */ + 266000 1300000 + 399000 1450000 + >; + clock-latency = <62500>; + clocks = <&clks 18>; + voltage-tolerance = <5>; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&avic>; + interrupt-parent = <&aitc>; ranges; aipi@10000000 { /* AIPI1 */ @@ -75,7 +95,7 @@ compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x1000>; interrupts = <27>; - clocks = <&clks 0>; + clocks = <&clks 74>; }; gpt1: timer@10003000 { @@ -102,7 +122,7 @@ clock-names = "ipg", "per"; }; - pwm0: pwm@10006000 { + pwm: pwm@10006000 { compatible = "fsl,imx27-pwm"; reg = <0x10006000 0x1000>; interrupts = <23>; @@ -110,6 +130,21 @@ clock-names = "ipg", "per"; }; + kpp: kpp@10008000 { + compatible = "fsl,imx27-kpp", "fsl,imx21-kpp"; + reg = <0x10008000 0x1000>; + interrupts = <21>; + clocks = <&clks 37>; + status = "disabled"; + }; + + owire: owire@10009000 { + compatible = "fsl,imx27-owire", "fsl,imx21-owire"; + reg = <0x10009000 0x1000>; + clocks = <&clks 35>; + status = "disabled"; + }; + uart1: serial@1000a000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>; @@ -260,6 +295,14 @@ #interrupt-cells = <2>; }; + audmux: audmux@10016000 { + compatible = "fsl,imx27-audmux", "fsl,imx21-audmux"; + reg = <0x10016000 0x1000>; + clocks = <&clks 0>; + clock-names = "audmux"; + status = "disabled"; + }; + cspi3: cspi@10017000 { #address-cells = <1>; #size-cells = <0>; @@ -342,6 +385,15 @@ reg = <0x10020000 0x20000>; ranges; + fb: fb@10021000 { + compatible = "fsl,imx27-fb", "fsl,imx21-fb"; + interrupts = <61>; + reg = <0x10021000 0x1000>; + clocks = <&clks 36>, <&clks 65>, <&clks 59>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + coda: coda@10023000 { compatible = "fsl,imx27-vpu"; reg = <0x10023000 0x0200>; @@ -351,27 +403,37 @@ iram = <&iram>; }; + sahara2: sahara@10025000 { + compatible = "fsl,imx27-sahara"; + reg = <0x10025000 0x1000>; + interrupts = <59>; + clocks = <&clks 32>, <&clks 64>; + clock-names = "ipg", "ahb"; + }; + clks: ccm@10027000{ compatible = "fsl,imx27-ccm"; reg = <0x10027000 0x1000>; #clock-cells = <1>; }; + iim: iim@10028000 { + compatible = "fsl,imx27-iim"; + reg = <0x10028000 0x1000>; + interrupts = <62>; + clocks = <&clks 38>; + }; + fec: ethernet@1002b000 { compatible = "fsl,imx27-fec"; reg = <0x1002b000 0x4000>; interrupts = <50>; - clocks = <&clks 48>, <&clks 67>, <&clks 0>; - clock-names = "ipg", "ahb", "ptp"; + clocks = <&clks 48>, <&clks 67>; + clock-names = "ipg", "ahb"; status = "disabled"; }; }; - iram: iram@ffff4c00 { - compatible = "mmio-sram"; - reg = <0xffff4c00 0xb400>; - }; - nfc: nand@d8000000 { #address-cells = <1>; #size-cells = <1>; @@ -381,5 +443,27 @@ clocks = <&clks 54>; status = "disabled"; }; + + weim: weim@d8002000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,imx27-weim"; + reg = <0xd8002000 0x1000>; + clocks = <&clks 0>; + ranges = < + 0 0 0xc0000000 0x08000000 + 1 0 0xc8000000 0x08000000 + 2 0 0xd0000000 0x02000000 + 3 0 0xd2000000 0x02000000 + 4 0 0xd4000000 0x02000000 + 5 0 0xd6000000 0x02000000 + >; + status = "disabled"; + }; + + iram: iram@ffff4c00 { + compatible = "mmio-sram"; + reg = <0xffff4c00 0xb400>; + }; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index 94c4476972c3fe3b53e3a619981acce652cda8e5..1ec8c94bbac97f82f48fad9a868b70a66a438030 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -23,10 +23,7 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_cfa10036>; - - hog_pins_cfa10036: hog-10036@0 { + ssd1306_cfa10036: ssd1306-10036@0 { reg = <0>; fsl,pinmux-ids = < 0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */ @@ -83,6 +80,8 @@ ssd1306: oled@3c { compatible = "solomon,ssd1306fb-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&ssd1306_cfa10036>; reg = <0x3c>; reset-gpios = <&gpio2 7 0>; solomon,height = <32>; diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts index c2ef3a3d655e5f65341abef241cb844d5c6be861..182b99fe35f39b77b0c43cb396593624a043f7ba 100644 --- a/arch/arm/boot/dts/imx28-cfa10037.dts +++ b/arch/arm/boot/dts/imx28-cfa10037.dts @@ -22,13 +22,19 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { - pinctrl-names = "default", "default"; - pinctrl-1 = <&hog_pins_cfa10037>; - - hog_pins_cfa10037: hog-10037@0 { + usb_pins_cfa10037: usb-10037@0 { reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + mac0_pins_cfa10037: mac0-10037@0 { + reg = <0>; + fsl,pinmux-ids = < 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ >; fsl,drive-strength = <0>; @@ -56,7 +62,8 @@ mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; + pinctrl-0 = <&mac0_pins_a + &mac0_pins_cfa10037>; phy-reset-gpios = <&gpio2 21 0>; phy-reset-duration = <100>; status = "okay"; @@ -68,6 +75,8 @@ reg_usb1_vbus: usb1_vbus { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins_cfa10037>; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 04b2f769ffbd9c030bbd175376fe03fb2545b7dd..06e4cfaf7dd2678b71ba7d523891c2008e31eff5 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -22,32 +22,62 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { - pinctrl-names = "default", "default"; - pinctrl-1 = <&hog_pins_cfa10049 - &hog_pins_cfa10049_pullup>; - - hog_pins_cfa10049: hog-10049@0 { + usb_pins_cfa10049: usb-10049@0 { reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + i2cmux_pins_cfa10049: i2cmux-10049@0 { + reg = <0>; + fsl,pinmux-ids = < 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + mac0_pins_cfa10049: mac0-10049@0 { + reg = <0>; + fsl,pinmux-ids = < 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; - hog_pins_cfa10049_pullup: hog-10049-pullup@0 { + pca_pins_cfa10049: pca-10049@0 { reg = <0>; fsl,pinmux-ids = < 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + rotary_pins_cfa10049: rotary-10049@0 { + reg = <0>; + fsl,pinmux-ids = < 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + rotary_btn_pins_cfa10049: rotary-btn-10049@0 { + reg = <0>; + fsl,pinmux-ids = < 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -60,6 +90,7 @@ 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; @@ -120,6 +151,16 @@ fsl,pull-up = <0>; }; + lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + w1_gpio_pins: w1-gpio@0 { reg = <0>; fsl,pinmux-ids = < @@ -134,7 +175,8 @@ lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_18bit_pins_cfa10049 - &lcdif_pins_cfa10049>; + &lcdif_pins_cfa10049 + &lcdif_pins_cfa10049_pullup>; display = <&display>; status = "okay"; @@ -181,6 +223,8 @@ compatible = "i2c-mux-gpio"; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2cmux_pins_cfa10049>; mux-gpios = <&gpio1 22 0 &gpio1 23 0>; i2c-parent = <&i2c1>; @@ -203,6 +247,8 @@ pca9555: pca9555@20 { compatible = "nxp,pca9555"; + pinctrl-names = "default"; + pinctrl-0 = <&pca_pins_cfa10049>; interrupt-parent = <&gpio2>; interrupts = <19 0x2>; gpio-controller; @@ -239,6 +285,8 @@ reg_usb1_vbus: usb1_vbus { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins_cfa10049>; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -250,7 +298,8 @@ mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; + pinctrl-0 = <&mac0_pins_a + &mac0_pins_cfa10049>; phy-reset-gpios = <&gpio2 21 0>; phy-reset-duration = <100>; status = "okay"; @@ -320,6 +369,8 @@ gpio_keys { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&rotary_btn_pins_cfa10049>; #address-cells = <1>; #size-cells = <0>; @@ -333,6 +384,8 @@ rotary { compatible = "rotary-encoder"; + pinctrl-names = "default"; + pinctrl-0 = <&rotary_pins_cfa10049>; gpios = <&gpio3 24 1>, <&gpio3 25 1>; linux,axis = <1>; /* REL_Y */ rotary-encoder,relative-axis; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index 158111244122a3503cdab45348aea0fde84e1d2f..171bcbe1ec4b3ed995f7895a5b6a51868460b48c 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -23,36 +23,13 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { - pinctrl-names = "default", "default"; - pinctrl-1 = <&hog_pins_cfa10055 - &hog_pins_cfa10055_pullup>; - - hog_pins_cfa10055: hog-10055@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; - }; - - hog_pins_cfa10055_pullup: hog-10055-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; - }; - spi2_pins_cfa10055: spi2-cfa10055@0 { reg = <0>; fsl,pinmux-ids = < 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; @@ -98,12 +75,23 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; }; lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_18bit_pins_cfa10055 - &lcdif_pins_cfa10055>; + &lcdif_pins_cfa10055 + &lcdif_pins_cfa10055_pullup>; display = <&display>; status = "okay"; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts new file mode 100644 index 0000000000000000000000000000000000000000..b45dd0e4ee57931d9cecd7dfe567408c64d65b1b --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -0,0 +1,119 @@ +/* + * Copyright 2013 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10055 is an expansion board for the CFA-10036 module and + * CFA-10037, thus we need to include the CFA-10037 DTS. + */ +/include/ "imx28-cfa10037.dts" + +/ { + model = "Crystalfontz CFA-10056 Board"; + compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + spi2_pins_cfa10056: spi2-cfa10056@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ + 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ + 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + lcdif_pins_cfa10056: lcdif-10056@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10056 + &lcdif_pins_cfa10056_pullup >; + display = <&display>; + status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <32000000>; + hactive = <480>; + vactive = <800>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <5>; + vsync-len = <5>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + }; + }; + }; + + spi2 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_cfa10056>; + status = "okay"; + gpio-sck = <&gpio2 16 0>; + gpio-mosi = <&gpio2 17 0>; + gpio-miso = <&gpio2 18 0>; + cs-gpios = <&gpio3 5 0>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + hx8369: hx8369@0 { + compatible = "himax,hx8369a", "himax,hx8369"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + gpios-reset = <&gpio3 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index 2da713cdb42aa3de69fdac76bbd522a4a458857f..0333c0532f28f3ff5e4e011036214b31393c29df 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -23,35 +23,16 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { - pinctrl-names = "default", "default"; - pinctrl-1 = <&hog_pins_cfa10057 - &hog_pins_cfa10057_pullup>; - - hog_pins_cfa10057: hog-10057@0 { + usb_pins_cfa10057: usb-10057@0 { reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; - hog_pins_cfa10057_pullup: hog-10057-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ - 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ - 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ - 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; - }; - lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { reg = <0>; fsl,pinmux-ids = < @@ -164,6 +145,8 @@ reg_usb1_vbus: usb1_vbus { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins_cfa10057>; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts new file mode 100644 index 0000000000000000000000000000000000000000..64c64c55a82a27cbb2221a9ac7f6390a173426e7 --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -0,0 +1,141 @@ +/* + * Copyright 2013 Crystalfontz America, Inc. + * Copyright 2013 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10058 is an expansion board for the CFA-10036 module, thus we + * need to include the CFA-10036 DTS. + */ +/include/ "imx28-cfa10036.dts" + +/ { + model = "Crystalfontz CFA-10058 Board"; + compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + usb_pins_cfa10058: usb-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_cfa10058: lcdif-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10058>; + display = <&display>; + status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <40>; + vback-porch = <13>; + vfront-porch = <29>; + hsync-len = <8>; + vsync-len = <8>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + }; + }; + + apbx@80040000 { + lradc@80050000 { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usbphy1_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb1_vbus: usb1_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins_cfa10058>; + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 7 1>; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 0>; + phy-reset-duration = <100>; + status = "okay"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index e035f4664b97493b2261b97b33cfbc97da8b539c..15715d921d14417a5f0e1e8fe76047410239aaa9 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -220,6 +220,7 @@ auart0: serial@8006a000 { pinctrl-names = "default"; pinctrl-0 = <&auart0_pins_a>; + fsl,uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 44d9da57736e637ef4fcc4a113fcef651a07d58d..0d322a2bebaf5fe31e088d8b98c73f08ed4b9d7d 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -235,6 +235,12 @@ pinctrl-0 = <&auart2_2pins_b>; status = "okay"; }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; + }; }; }; @@ -270,6 +276,13 @@ }; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 4 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + regulators { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 9524a05712810bba53382f2b066943cc03c7a675..7363fded95ee9411d21faf35c4a242ccd5aeb592 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -15,6 +15,8 @@ interrupt-parent = <&icoll>; aliases { + ethernet0 = &mac0; + ethernet1 = &mac1; gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; @@ -27,8 +29,8 @@ serial2 = &auart2; serial3 = &auart3; serial4 = &auart4; - ethernet0 = &mac0; - ethernet1 = &mac1; + spi0 = &ssp1; + spi1 = &ssp2; }; cpus { @@ -62,9 +64,9 @@ reg = <0x80000000 0x2000>; }; - hsadc@80002000 { + hsadc: hsadc@80002000 { reg = <0x80002000 0x2000>; - interrupts = <13 87>; + interrupts = <13>; dmas = <&dma_apbh 12>; dma-names = "rx"; status = "disabled"; @@ -86,25 +88,24 @@ clocks = <&clks 25>; }; - perfmon@80006000 { + perfmon: perfmon@80006000 { reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; - gpmi-nand@8000c000 { + gpmi: gpmi-nand@8000c000 { compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; - interrupts = <88>, <41>; - interrupt-names = "gpmi-dma", "bch"; + interrupts = <41>; + interrupt-names = "bch"; clocks = <&clks 50>; clock-names = "gpmi_io"; dmas = <&dma_apbh 4>; dma-names = "rx-tx"; - fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -112,11 +113,10 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x80010000 0x2000>; - interrupts = <96 82>; + interrupts = <96>; clocks = <&clks 46>; dmas = <&dma_apbh 0>; dma-names = "rx-tx"; - fsl,ssp-dma-channel = <0>; status = "disabled"; }; @@ -124,11 +124,10 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x80012000 0x2000>; - interrupts = <97 83>; + interrupts = <97>; clocks = <&clks 47>; dmas = <&dma_apbh 1>; dma-names = "rx-tx"; - fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -136,11 +135,10 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x80014000 0x2000>; - interrupts = <98 84>; + interrupts = <98>; clocks = <&clks 48>; dmas = <&dma_apbh 2>; dma-names = "rx-tx"; - fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -148,15 +146,14 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x80016000 0x2000>; - interrupts = <99 85>; + interrupts = <99>; clocks = <&clks 49>; dmas = <&dma_apbh 3>; dma-names = "rx-tx"; - fsl,ssp-dma-channel = <3>; status = "disabled"; }; - pinctrl@80018000 { + pinctrl: pinctrl@80018000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; @@ -521,6 +518,18 @@ fsl,pull-up = <1>; }; + saif0_pins_b: saif0@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */ + 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */ + 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */ + >; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + saif1_pins_a: saif1@0 { reg = <0>; fsl,pinmux-ids = < @@ -639,6 +648,19 @@ fsl,pull-up = <0>; }; + lcdif_sync_pins_a: lcdif-sync@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + can0_pins_a: can0@0 { reg = <0>; fsl,pinmux-ids = < @@ -674,6 +696,21 @@ fsl,pull-up = <1>; }; + spi3_pins_a: spi3@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3082 /* MX28_PAD_AUART2_RX__SSP3_D4 */ + 0x3092 /* MX28_PAD_AUART2_TX__SSP3_D5 */ + 0x2180 /* MX28_PAD_SSP3_SCK__SSP3_SCK */ + 0x2190 /* MX28_PAD_SSP3_MOSI__SSP3_CMD */ + 0x21A0 /* MX28_PAD_SSP3_MISO__SSP3_D0 */ + 0x21B0 /* MX28_PAD_SSP3_SS0__SSP3_D3 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + usbphy0_pins_a: usbphy0@0 { reg = <0>; fsl,pinmux-ids = < @@ -705,14 +742,14 @@ }; }; - digctl@8001c000 { + digctl: digctl@8001c000 { compatible = "fsl,imx28-digctl", "fsl,imx23-digctl"; reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; - etm@80022000 { + etm: etm@80022000 { reg = <0x80022000 0x2000>; status = "disabled"; }; @@ -733,19 +770,19 @@ clocks = <&clks 26>; }; - dcp@80028000 { + dcp: dcp@80028000 { reg = <0x80028000 0x2000>; interrupts = <52 53 54>; compatible = "fsl-dcp"; }; - pxp@8002a000 { + pxp: pxp@8002a000 { reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; - ocotp@8002c000 { + ocotp: ocotp@8002c000 { compatible = "fsl,ocotp"; reg = <0x8002c000 0x2000>; status = "disabled"; @@ -756,10 +793,10 @@ status = "disabled"; }; - lcdif@80030000 { + lcdif: lcdif@80030000 { compatible = "fsl,imx28-lcdif"; reg = <0x80030000 0x2000>; - interrupts = <38 86>; + interrupts = <38>; clocks = <&clks 55>; dmas = <&dma_apbh 13>; dma-names = "rx"; @@ -784,41 +821,41 @@ status = "disabled"; }; - simdbg@8003c000 { + simdbg: simdbg@8003c000 { reg = <0x8003c000 0x200>; status = "disabled"; }; - simgpmisel@8003c200 { + simgpmisel: simgpmisel@8003c200 { reg = <0x8003c200 0x100>; status = "disabled"; }; - simsspsel@8003c300 { + simsspsel: simsspsel@8003c300 { reg = <0x8003c300 0x100>; status = "disabled"; }; - simmemsel@8003c400 { + simmemsel: simmemsel@8003c400 { reg = <0x8003c400 0x100>; status = "disabled"; }; - gpiomon@8003c500 { + gpiomon: gpiomon@8003c500 { reg = <0x8003c500 0x100>; status = "disabled"; }; - simenet@8003c700 { + simenet: simenet@8003c700 { reg = <0x8003c700 0x100>; status = "disabled"; }; - armjtag@8003c800 { + armjtag: armjtag@8003c800 { reg = <0x8003c800 0x100>; status = "disabled"; }; - }; + }; apbx@80040000 { compatible = "simple-bus"; @@ -836,16 +873,15 @@ saif0: saif@80042000 { compatible = "fsl,imx28-saif"; reg = <0x80042000 0x2000>; - interrupts = <59 80>; + interrupts = <59>; #clock-cells = <0>; clocks = <&clks 53>; dmas = <&dma_apbx 4>; dma-names = "rx-tx"; - fsl,saif-dma-channel = <4>; status = "disabled"; }; - power@80044000 { + power: power@80044000 { reg = <0x80044000 0x2000>; status = "disabled"; }; @@ -853,15 +889,14 @@ saif1: saif@80046000 { compatible = "fsl,imx28-saif"; reg = <0x80046000 0x2000>; - interrupts = <58 81>; + interrupts = <58>; clocks = <&clks 54>; dmas = <&dma_apbx 5>; dma-names = "rx-tx"; - fsl,saif-dma-channel = <5>; status = "disabled"; }; - lradc@80050000 { + lradc: lradc@80050000 { compatible = "fsl,imx28-lradc"; reg = <0x80050000 0x2000>; interrupts = <10 14 15 16 17 18 19 @@ -869,15 +904,15 @@ status = "disabled"; }; - spdif@80054000 { + spdif: spdif@80054000 { reg = <0x80054000 0x2000>; - interrupts = <45 66>; + interrupts = <45>; dmas = <&dma_apbx 2>; dma-names = "tx"; status = "disabled"; }; - rtc@80056000 { + mxs_rtc: rtc@80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; reg = <0x80056000 0x2000>; interrupts = <29>; @@ -888,11 +923,10 @@ #size-cells = <0>; compatible = "fsl,imx28-i2c"; reg = <0x80058000 0x2000>; - interrupts = <111 68>; + interrupts = <111>; clock-frequency = <100000>; dmas = <&dma_apbx 6>; dma-names = "rx-tx"; - fsl,i2c-dma-channel = <6>; status = "disabled"; }; @@ -901,11 +935,10 @@ #size-cells = <0>; compatible = "fsl,imx28-i2c"; reg = <0x8005a000 0x2000>; - interrupts = <110 69>; + interrupts = <110>; clock-frequency = <100000>; dmas = <&dma_apbx 7>; dma-names = "rx-tx"; - fsl,i2c-dma-channel = <7>; status = "disabled"; }; @@ -918,7 +951,7 @@ status = "disabled"; }; - timrot@80068000 { + timer: timrot@80068000 { compatible = "fsl,imx28-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; interrupts = <48 49 50 51>; @@ -928,10 +961,9 @@ auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; - interrupts = <112 70 71>; + interrupts = <112>; dmas = <&dma_apbx 8>, <&dma_apbx 9>; dma-names = "rx", "tx"; - fsl,auart-dma-channel = <8 9>; clocks = <&clks 45>; status = "disabled"; }; @@ -939,7 +971,7 @@ auart1: serial@8006c000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; - interrupts = <113 72 73>; + interrupts = <113>; dmas = <&dma_apbx 10>, <&dma_apbx 11>; dma-names = "rx", "tx"; clocks = <&clks 45>; @@ -949,7 +981,7 @@ auart2: serial@8006e000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; - interrupts = <114 74 75>; + interrupts = <114>; dmas = <&dma_apbx 12>, <&dma_apbx 13>; dma-names = "rx", "tx"; clocks = <&clks 45>; @@ -959,7 +991,7 @@ auart3: serial@80070000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; - interrupts = <115 76 77>; + interrupts = <115>; dmas = <&dma_apbx 14>, <&dma_apbx 15>; dma-names = "rx", "tx"; clocks = <&clks 45>; @@ -969,7 +1001,7 @@ auart4: serial@80072000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; - interrupts = <116 78 79>; + interrupts = <116>; dmas = <&dma_apbx 0>, <&dma_apbx 1>; dma-names = "rx", "tx"; clocks = <&clks 45>; @@ -1026,7 +1058,7 @@ status = "disabled"; }; - dflpt@800c0000 { + dflpt: dflpt@800c0000 { reg = <0x800c0000 0x10000>; status = "disabled"; }; @@ -1049,10 +1081,9 @@ status = "disabled"; }; - switch@800f8000 { + etn_switch: switch@800f8000 { reg = <0x800f8000 0x8000>; status = "disabled"; }; - }; }; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index c5449257ad9a7c894b1f9cd93d66cb489a77ca96..c34f82581248a98f1b3a83da99fa50eda502a42c 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -20,6 +20,16 @@ serial4 = &uart5; }; + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm1136"; + device_type = "cpu"; + }; + }; + avic: avic-interrupt-controller@60000000 { compatible = "fsl,imx31-avic", "fsl,avic"; interrupt-controller; @@ -94,6 +104,13 @@ status = "disabled"; }; + iim: iim@5001c000 { + compatible = "fsl,imx31-iim", "fsl,imx27-iim"; + reg = <0x5001c000 0x1000>; + interrupts = <19>; + clocks = <&clks 25>; + }; + clks: ccm@53f80000{ compatible = "fsl,imx31-ccm"; reg = <0x53f80000 0x4000>; diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts index 8f7f9ac0b989bb18f6e093929d5037a33db9a095..b3606993f2e8db4e4327305f52fddec70249e9f3 100644 --- a/arch/arm/boot/dts/imx51-apf51.dts +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -26,10 +26,6 @@ }; clocks { - ckih1 { - clock-frequency = <0>; - }; - osc { clock-frequency = <33554432>; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index ad3471ca17c7aad36904f26b3f0070eac4b58d3a..1d337d99ecd533e7deea58a46a8a3fb55287a8d8 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -63,6 +63,10 @@ }; clocks { + ckih1 { + clock-frequency = <22579200>; + }; + clk_26M: codec_clock { compatible = "fixed-clock"; reg=<0>; @@ -108,6 +112,7 @@ #size-cells = <0>; compatible = "fsl,mc13892"; spi-max-frequency = <6000000>; + spi-cs-high; reg = <0>; interrupt-parent = <&gpio1>; interrupts = <8 0x4>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 25764b505a619c7e5ff943aa3e4c6769b1256e07..a85abb424c3482d02dd325ae388bcf63686acc56 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -15,13 +15,18 @@ / { aliases { - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; gpio3 = &gpio4; + i2c0 = &i2c1; + i2c1 = &i2c2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &cspi; }; tzic: tz-interrupt-controller@e0000000 { @@ -42,7 +47,7 @@ ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; - clock-frequency = <22579200>; + clock-frequency = <0>; }; ckih2 { @@ -149,6 +154,9 @@ reg = <0x70014000 0x4000>; interrupts = <30>; clocks = <&clks 49>; + dmas = <&sdma 24 1 0>, + <&sdma 25 1 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -300,275 +308,6 @@ iomuxc: iomuxc@73fa8000 { compatible = "fsl,imx51-iomuxc"; reg = <0x73fa8000 0x4000>; - - audmux { - pinctrl_audmux_1: audmuxgrp-1 { - fsl,pins = < - MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 - MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000 - MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000 - MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000 - >; - }; - }; - - fec { - pinctrl_fec_1: fecgrp-1 { - fsl,pins = < - MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000 - MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000 - MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000 - MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000 - MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000 - MX51_PAD_EIM_CS5__FEC_CRS 0x80000000 - MX51_PAD_NANDF_RB2__FEC_COL 0x80000000 - MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000 - MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000 - MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000 - MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000 - MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000 - MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000 - MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000 - MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000 - MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000 - MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000 - >; - }; - - pinctrl_fec_2: fecgrp-2 { - fsl,pins = < - MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 - MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 - MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 - MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 - MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 - MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 - MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 - MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 - MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 - MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 - MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 - MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 - MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 - MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 - MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 - MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 - MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 - MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 - >; - }; - }; - - ecspi1 { - pinctrl_ecspi1_1: ecspi1grp-1 { - fsl,pins = < - MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 - >; - }; - }; - - ecspi2 { - pinctrl_ecspi2_1: ecspi2grp-1 { - fsl,pins = < - MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185 - MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185 - MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185 - >; - }; - }; - - esdhc1 { - pinctrl_esdhc1_1: esdhc1grp-1 { - fsl,pins = < - MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 - MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 - MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 - MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 - MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 - MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 - >; - }; - }; - - esdhc2 { - pinctrl_esdhc2_1: esdhc2grp-1 { - fsl,pins = < - MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 - MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 - MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 - MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 - MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 - MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 - >; - }; - }; - - i2c2 { - pinctrl_i2c2_1: i2c2grp-1 { - fsl,pins = < - MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed - MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed - >; - }; - - pinctrl_i2c2_2: i2c2grp-2 { - fsl,pins = < - MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed - MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed - >; - }; - }; - - ipu_disp1 { - pinctrl_ipu_disp1_1: ipudisp1grp-1 { - fsl,pins = < - MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 - MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 - MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 - MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 - MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 - MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 - MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 - MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 - MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 - MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 - MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 - MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 - MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 - MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 - MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 - MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 - MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 - MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 - MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 - MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 - MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 - MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 - MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 - MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 - MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 /* hsync */ - MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 /* vsync */ - >; - }; - }; - - ipu_disp2 { - pinctrl_ipu_disp2_1: ipudisp2grp-1 { - fsl,pins = < - MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5 - MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5 - MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5 - MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5 - MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5 - MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5 - MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5 - MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5 - MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5 - MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5 - MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5 - MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5 - MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5 - MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5 - MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5 - MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5 - MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 /* hsync */ - MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 /* vsync */ - MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 - MX51_PAD_DI_GP4__DI2_PIN15 0x5 - >; - }; - }; - - pata { - pinctrl_pata_1: patagrp-1 { - fsl,pins = < - MX51_PAD_NANDF_WE_B__PATA_DIOW 0x2004 - MX51_PAD_NANDF_RE_B__PATA_DIOR 0x2004 - MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004 - MX51_PAD_NANDF_CLE__PATA_RESET_B 0x2004 - MX51_PAD_NANDF_WP_B__PATA_DMACK 0x2004 - MX51_PAD_NANDF_RB0__PATA_DMARQ 0x2004 - MX51_PAD_NANDF_RB1__PATA_IORDY 0x2004 - MX51_PAD_GPIO_NAND__PATA_INTRQ 0x2004 - MX51_PAD_NANDF_CS2__PATA_CS_0 0x2004 - MX51_PAD_NANDF_CS3__PATA_CS_1 0x2004 - MX51_PAD_NANDF_CS4__PATA_DA_0 0x2004 - MX51_PAD_NANDF_CS5__PATA_DA_1 0x2004 - MX51_PAD_NANDF_CS6__PATA_DA_2 0x2004 - MX51_PAD_NANDF_D15__PATA_DATA15 0x2004 - MX51_PAD_NANDF_D14__PATA_DATA14 0x2004 - MX51_PAD_NANDF_D13__PATA_DATA13 0x2004 - MX51_PAD_NANDF_D12__PATA_DATA12 0x2004 - MX51_PAD_NANDF_D11__PATA_DATA11 0x2004 - MX51_PAD_NANDF_D10__PATA_DATA10 0x2004 - MX51_PAD_NANDF_D9__PATA_DATA9 0x2004 - MX51_PAD_NANDF_D8__PATA_DATA8 0x2004 - MX51_PAD_NANDF_D7__PATA_DATA7 0x2004 - MX51_PAD_NANDF_D6__PATA_DATA6 0x2004 - MX51_PAD_NANDF_D5__PATA_DATA5 0x2004 - MX51_PAD_NANDF_D4__PATA_DATA4 0x2004 - MX51_PAD_NANDF_D3__PATA_DATA3 0x2004 - MX51_PAD_NANDF_D2__PATA_DATA2 0x2004 - MX51_PAD_NANDF_D1__PATA_DATA1 0x2004 - MX51_PAD_NANDF_D0__PATA_DATA0 0x2004 - >; - }; - }; - - uart1 { - pinctrl_uart1_1: uart1grp-1 { - fsl,pins = < - MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 - MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 - MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 - MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 - >; - }; - }; - - uart2 { - pinctrl_uart2_1: uart2grp-1 { - fsl,pins = < - MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 - MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 - >; - }; - }; - - uart3 { - pinctrl_uart3_1: uart3grp-1 { - fsl,pins = < - MX51_PAD_EIM_D25__UART3_RXD 0x1c5 - MX51_PAD_EIM_D26__UART3_TXD 0x1c5 - MX51_PAD_EIM_D27__UART3_RTS 0x1c5 - MX51_PAD_EIM_D24__UART3_CTS 0x1c5 - >; - }; - - pinctrl_uart3_2: uart3grp-2 { - fsl,pins = < - MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 - MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 - >; - }; - }; - - kpp { - pinctrl_kpp_1: kppgrp-1 { - fsl,pins = < - MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0 - MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0 - MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0 - MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0 - MX51_PAD_KEY_COL0__KEY_COL0 0xe8 - MX51_PAD_KEY_COL1__KEY_COL1 0xe8 - MX51_PAD_KEY_COL2__KEY_COL2 0xe8 - MX51_PAD_KEY_COL3__KEY_COL3 0xe8 - >; - }; - }; }; pwm1: pwm@73fb4000 { @@ -628,6 +367,13 @@ reg = <0x80000000 0x10000000>; ranges; + iim: iim@83f98000 { + compatible = "fsl,imx51-iim", "fsl,imx27-iim"; + reg = <0x83f98000 0x4000>; + interrupts = <69>; + clocks = <&clks 107>; + }; + ecspi2: ecspi@83fac000 { #address-cells = <1>; #size-cells = <0>; @@ -645,6 +391,7 @@ interrupts = <6>; clocks = <&clks 56>, <&clks 56>; clock-names = "ipg", "ahb"; + #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; }; @@ -684,6 +431,9 @@ reg = <0x83fcc000 0x4000>; interrupts = <29>; clocks = <&clks 48>; + dmas = <&sdma 28 0 0>, + <&sdma 29 0 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -695,6 +445,23 @@ status = "disabled"; }; + weim: weim@83fda000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,imx51-weim"; + reg = <0x83fda000 0x1000>; + clocks = <&clks 57>; + ranges = < + 0 0 0xb0000000 0x08000000 + 1 0 0xb8000000 0x08000000 + 2 0 0xc0000000 0x08000000 + 3 0 0xc8000000 0x04000000 + 4 0 0xcc000000 0x02000000 + 5 0 0xce000000 0x02000000 + >; + status = "disabled"; + }; + nfc: nand@83fdb000 { compatible = "fsl,imx51-nand"; reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; @@ -716,6 +483,9 @@ reg = <0x83fe8000 0x4000>; interrupts = <96>; clocks = <&clks 50>; + dmas = <&sdma 46 0 0>, + <&sdma 47 0 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -732,3 +502,319 @@ }; }; }; + +&iomuxc { + audmux { + pinctrl_audmux_1: audmuxgrp-1 { + fsl,pins = < + MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 + MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000 + MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000 + MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000 + >; + }; + }; + + fec { + pinctrl_fec_1: fecgrp-1 { + fsl,pins = < + MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000 + MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000 + MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000 + MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000 + MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000 + MX51_PAD_EIM_CS5__FEC_CRS 0x80000000 + MX51_PAD_NANDF_RB2__FEC_COL 0x80000000 + MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000 + MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000 + MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000 + MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000 + MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000 + MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000 + MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000 + MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000 + MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000 + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000 + >; + }; + + pinctrl_fec_2: fecgrp-2 { + fsl,pins = < + MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 + MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 + MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 + MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 + MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 + >; + }; + }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + >; + }; + }; + + ecspi2 { + pinctrl_ecspi2_1: ecspi2grp-1 { + fsl,pins = < + MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185 + MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185 + MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185 + >; + }; + }; + + esdhc1 { + pinctrl_esdhc1_1: esdhc1grp-1 { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + >; + }; + }; + + esdhc2 { + pinctrl_esdhc2_1: esdhc2grp-1 { + fsl,pins = < + MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 + MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 + MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 + MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 + MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 + MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 + >; + }; + }; + + i2c2 { + pinctrl_i2c2_1: i2c2grp-1 { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_i2c2_2: i2c2grp-2 { + fsl,pins = < + MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed + MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_i2c2_3: i2c2grp-3 { + fsl,pins = < + MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed + MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed + >; + }; + }; + + ipu_disp1 { + pinctrl_ipu_disp1_1: ipudisp1grp-1 { + fsl,pins = < + MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 + MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 + MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 + MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 + MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 + MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 + MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 + MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 + MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 + MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 + MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 + MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 + MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 + MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 + MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 + MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 + MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 + MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 + MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 + MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 + MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 + MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 + MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 + MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 + MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 /* hsync */ + MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 /* vsync */ + >; + }; + }; + + ipu_disp2 { + pinctrl_ipu_disp2_1: ipudisp2grp-1 { + fsl,pins = < + MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5 + MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5 + MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5 + MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5 + MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5 + MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5 + MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5 + MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5 + MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5 + MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5 + MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5 + MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5 + MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5 + MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5 + MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5 + MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5 + MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 /* hsync */ + MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 /* vsync */ + MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 /* CLK */ + MX51_PAD_DI_GP4__DI2_PIN15 0x5 /* DE */ + >; + }; + }; + + kpp { + pinctrl_kpp_1: kppgrp-1 { + fsl,pins = < + MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0 + MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0 + MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0 + MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0 + MX51_PAD_KEY_COL0__KEY_COL0 0xe8 + MX51_PAD_KEY_COL1__KEY_COL1 0xe8 + MX51_PAD_KEY_COL2__KEY_COL2 0xe8 + MX51_PAD_KEY_COL3__KEY_COL3 0xe8 + >; + }; + }; + + pata { + pinctrl_pata_1: patagrp-1 { + fsl,pins = < + MX51_PAD_NANDF_WE_B__PATA_DIOW 0x2004 + MX51_PAD_NANDF_RE_B__PATA_DIOR 0x2004 + MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004 + MX51_PAD_NANDF_CLE__PATA_RESET_B 0x2004 + MX51_PAD_NANDF_WP_B__PATA_DMACK 0x2004 + MX51_PAD_NANDF_RB0__PATA_DMARQ 0x2004 + MX51_PAD_NANDF_RB1__PATA_IORDY 0x2004 + MX51_PAD_GPIO_NAND__PATA_INTRQ 0x2004 + MX51_PAD_NANDF_CS2__PATA_CS_0 0x2004 + MX51_PAD_NANDF_CS3__PATA_CS_1 0x2004 + MX51_PAD_NANDF_CS4__PATA_DA_0 0x2004 + MX51_PAD_NANDF_CS5__PATA_DA_1 0x2004 + MX51_PAD_NANDF_CS6__PATA_DA_2 0x2004 + MX51_PAD_NANDF_D15__PATA_DATA15 0x2004 + MX51_PAD_NANDF_D14__PATA_DATA14 0x2004 + MX51_PAD_NANDF_D13__PATA_DATA13 0x2004 + MX51_PAD_NANDF_D12__PATA_DATA12 0x2004 + MX51_PAD_NANDF_D11__PATA_DATA11 0x2004 + MX51_PAD_NANDF_D10__PATA_DATA10 0x2004 + MX51_PAD_NANDF_D9__PATA_DATA9 0x2004 + MX51_PAD_NANDF_D8__PATA_DATA8 0x2004 + MX51_PAD_NANDF_D7__PATA_DATA7 0x2004 + MX51_PAD_NANDF_D6__PATA_DATA6 0x2004 + MX51_PAD_NANDF_D5__PATA_DATA5 0x2004 + MX51_PAD_NANDF_D4__PATA_DATA4 0x2004 + MX51_PAD_NANDF_D3__PATA_DATA3 0x2004 + MX51_PAD_NANDF_D2__PATA_DATA2 0x2004 + MX51_PAD_NANDF_D1__PATA_DATA1 0x2004 + MX51_PAD_NANDF_D0__PATA_DATA0 0x2004 + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 + MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 + >; + }; + }; + + uart2 { + pinctrl_uart2_1: uart2grp-1 { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 + >; + }; + }; + + uart3 { + pinctrl_uart3_1: uart3grp-1 { + fsl,pins = < + MX51_PAD_EIM_D25__UART3_RXD 0x1c5 + MX51_PAD_EIM_D26__UART3_TXD 0x1c5 + MX51_PAD_EIM_D27__UART3_RTS 0x1c5 + MX51_PAD_EIM_D24__UART3_CTS 0x1c5 + >; + }; + + pinctrl_uart3_2: uart3grp-2 { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; + }; + + usbh1 { + pinctrl_usbh1_1: usbh1grp-1 { + fsl,pins = < + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 + MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 + MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 + >; + }; + }; + + usbh2 { + pinctrl_usbh2_1: usbh2grp-1 { + fsl,pins = < + MX51_PAD_EIM_D16__USBH2_DATA0 0x1e5 + MX51_PAD_EIM_D17__USBH2_DATA1 0x1e5 + MX51_PAD_EIM_D18__USBH2_DATA2 0x1e5 + MX51_PAD_EIM_D19__USBH2_DATA3 0x1e5 + MX51_PAD_EIM_D20__USBH2_DATA4 0x1e5 + MX51_PAD_EIM_D21__USBH2_DATA5 0x1e5 + MX51_PAD_EIM_D22__USBH2_DATA6 0x1e5 + MX51_PAD_EIM_D23__USBH2_DATA7 0x1e5 + MX51_PAD_EIM_A24__USBH2_CLK 0x1e5 + MX51_PAD_EIM_A25__USBH2_DIR 0x1e5 + MX51_PAD_EIM_A27__USBH2_NXT 0x1e5 + MX51_PAD_EIM_A26__USBH2_STP 0x1e5 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 512a1f60825345b41241da26bb9ca68f5bf8854d..e97ddae09d74cd1afea569013c75fcfde5b4b4b0 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -93,6 +93,15 @@ regulator-max-microvolt = <3200000>; regulator-always-on; }; + + reg_usb_vbus: usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 8 0>; + enable-active-high; + }; }; sound { @@ -145,6 +154,7 @@ MX53_PAD_EIM_DA12__GPIO3_12 0x80000000 MX53_PAD_EIM_DA13__GPIO3_13 0x80000000 MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 MX53_PAD_GPIO_16__GPIO7_11 0x80000000 >; }; @@ -297,8 +307,14 @@ status = "okay"; }; +&vpu { + status = "okay"; +}; + &usbh1 { - status = "okay"; + vbus-supply = <®_usb_vbus>; + phy_type = "utmi"; + status = "okay"; }; &usbotg { diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 569aa9f2c4eddb90736b47ea20c8a705b31e295b..4307e80b2d2e386e53d48ee2080ca66df625565f 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -15,11 +15,6 @@ / { aliases { - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -30,6 +25,24 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &cspi; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0x0>; + }; }; tzic: tz-interrupt-controller@0fffc000 { @@ -140,6 +153,9 @@ reg = <0x50014000 0x4000>; interrupts = <30>; clocks = <&clks 49>; + dmas = <&sdma 24 1 0>, + <&sdma 25 1 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -957,6 +973,13 @@ reg = <0x60000000 0x10000000>; ranges; + iim: iim@63f98000 { + compatible = "fsl,imx53-iim", "fsl,imx27-iim"; + reg = <0x63f98000 0x4000>; + interrupts = <69>; + clocks = <&clks 107>; + }; + uart5: serial@63f90000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x63f90000 0x4000>; @@ -990,6 +1013,7 @@ interrupts = <6>; clocks = <&clks 56>, <&clks 56>; clock-names = "ipg", "ahb"; + #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; }; @@ -1029,6 +1053,9 @@ reg = <0x63fcc000 0x4000>; interrupts = <29>; clocks = <&clks 48>; + dmas = <&sdma 28 0 0>, + <&sdma 29 0 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -1053,6 +1080,9 @@ reg = <0x63fe8000 0x4000>; interrupts = <96>; clocks = <&clks 50>; + dmas = <&sdma 46 0 0>, + <&sdma 47 0 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -1076,6 +1106,22 @@ crtcs = <&ipu 1>; status = "disabled"; }; + + vpu: vpu@63ff4000 { + compatible = "fsl,imx53-vpu"; + reg = <0x63ff4000 0x1000>; + interrupts = <9>; + clocks = <&clks 63>, <&clks 63>; + clock-names = "per", "ahb"; + iram = <&ocram>; + status = "disabled"; + }; + }; + + ocram: sram@f8000000 { + compatible = "mmio-sram"; + reg = <0xf8000000 0x20000>; + clocks = <&clks 186>; }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h index 9aab950ec2691292a631731ecba0a11f14719c0b..b81a7a4ebab6758926143ebd51d59b033a51df23 100644 --- a/arch/arm/boot/dts/imx6dl-pinfunc.h +++ b/arch/arm/boot/dts/imx6dl-pinfunc.h @@ -14,1072 +14,1076 @@ * The pin function ID is a tuple of * */ -#define MX6DL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x04c 0x360 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT10__AUD3_RXC 0x04c 0x360 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT10__ECSPI2_MISO 0x04c 0x360 0x7f8 0x2 0x0 -#define MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA 0x04c 0x360 0x000 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT10__UART1_RX_DATA 0x04c 0x360 0x8fc 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT10__GPIO5_IO28 0x04c 0x360 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT10__ARM_TRACE07 0x04c 0x360 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x050 0x364 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT11__AUD3_RXFS 0x050 0x364 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT11__ECSPI2_SS0 0x050 0x364 0x800 0x2 0x0 -#define MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x050 0x364 0x8fc 0x3 0x1 -#define MX6DL_PAD_CSI0_DAT11__UART1_TX_DATA 0x050 0x364 0x000 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT11__GPIO5_IO29 0x050 0x364 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT11__ARM_TRACE08 0x050 0x364 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x054 0x368 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT12__EIM_DATA08 0x054 0x368 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT12__UART4_TX_DATA 0x054 0x368 0x000 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT12__UART4_RX_DATA 0x054 0x368 0x914 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT12__GPIO5_IO30 0x054 0x368 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT12__ARM_TRACE09 0x054 0x368 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x058 0x36c 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT13__EIM_DATA09 0x058 0x36c 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT13__UART4_RX_DATA 0x058 0x36c 0x914 0x3 0x1 -#define MX6DL_PAD_CSI0_DAT13__UART4_TX_DATA 0x058 0x36c 0x000 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT13__GPIO5_IO31 0x058 0x36c 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT13__ARM_TRACE10 0x058 0x36c 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x05c 0x370 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT14__EIM_DATA10 0x05c 0x370 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT14__UART5_TX_DATA 0x05c 0x370 0x000 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT14__UART5_RX_DATA 0x05c 0x370 0x91c 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT14__GPIO6_IO00 0x05c 0x370 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT14__ARM_TRACE11 0x05c 0x370 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x060 0x374 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT15__EIM_DATA11 0x060 0x374 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT15__UART5_RX_DATA 0x060 0x374 0x91c 0x3 0x1 -#define MX6DL_PAD_CSI0_DAT15__UART5_TX_DATA 0x060 0x374 0x000 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT15__GPIO6_IO01 0x060 0x374 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT15__ARM_TRACE12 0x060 0x374 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x064 0x378 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT16__EIM_DATA12 0x064 0x378 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT16__UART4_RTS_B 0x064 0x378 0x910 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT16__UART4_CTS_B 0x064 0x378 0x000 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT16__GPIO6_IO02 0x064 0x378 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT16__ARM_TRACE13 0x064 0x378 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x068 0x37c 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT17__EIM_DATA13 0x068 0x37c 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT17__UART4_CTS_B 0x068 0x37c 0x000 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT17__UART4_RTS_B 0x068 0x37c 0x910 0x3 0x1 -#define MX6DL_PAD_CSI0_DAT17__GPIO6_IO03 0x068 0x37c 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT17__ARM_TRACE14 0x068 0x37c 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x06c 0x380 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT18__EIM_DATA14 0x06c 0x380 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT18__UART5_RTS_B 0x06c 0x380 0x918 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT18__UART5_CTS_B 0x06c 0x380 0x000 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT18__GPIO6_IO04 0x06c 0x380 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT18__ARM_TRACE15 0x06c 0x380 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x070 0x384 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT19__EIM_DATA15 0x070 0x384 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT19__UART5_CTS_B 0x070 0x384 0x000 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT19__UART5_RTS_B 0x070 0x384 0x918 0x3 0x1 -#define MX6DL_PAD_CSI0_DAT19__GPIO6_IO05 0x070 0x384 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x074 0x388 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT4__EIM_DATA02 0x074 0x388 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x074 0x388 0x7d8 0x2 0x0 -#define MX6DL_PAD_CSI0_DAT4__KEY_COL5 0x074 0x388 0x8c0 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT4__AUD3_TXC 0x074 0x388 0x000 0x4 0x0 -#define MX6DL_PAD_CSI0_DAT4__GPIO5_IO22 0x074 0x388 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT4__ARM_TRACE01 0x074 0x388 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x078 0x38c 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT5__EIM_DATA03 0x078 0x38c 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x078 0x38c 0x7e0 0x2 0x0 -#define MX6DL_PAD_CSI0_DAT5__KEY_ROW5 0x078 0x38c 0x8cc 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT5__AUD3_TXD 0x078 0x38c 0x000 0x4 0x0 -#define MX6DL_PAD_CSI0_DAT5__GPIO5_IO23 0x078 0x38c 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT5__ARM_TRACE02 0x078 0x38c 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x07c 0x390 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT6__EIM_DATA04 0x07c 0x390 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT6__ECSPI1_MISO 0x07c 0x390 0x7dc 0x2 0x0 -#define MX6DL_PAD_CSI0_DAT6__KEY_COL6 0x07c 0x390 0x8c4 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT6__AUD3_TXFS 0x07c 0x390 0x000 0x4 0x0 -#define MX6DL_PAD_CSI0_DAT6__GPIO5_IO24 0x07c 0x390 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT6__ARM_TRACE03 0x07c 0x390 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x080 0x394 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT7__EIM_DATA05 0x080 0x394 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT7__ECSPI1_SS0 0x080 0x394 0x7e4 0x2 0x0 -#define MX6DL_PAD_CSI0_DAT7__KEY_ROW6 0x080 0x394 0x8d0 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT7__AUD3_RXD 0x080 0x394 0x000 0x4 0x0 -#define MX6DL_PAD_CSI0_DAT7__GPIO5_IO25 0x080 0x394 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT7__ARM_TRACE04 0x080 0x394 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x084 0x398 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT8__EIM_DATA06 0x084 0x398 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x084 0x398 0x7f4 0x2 0x0 -#define MX6DL_PAD_CSI0_DAT8__KEY_COL7 0x084 0x398 0x8c8 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT8__I2C1_SDA 0x084 0x398 0x86c 0x4 0x0 -#define MX6DL_PAD_CSI0_DAT8__GPIO5_IO26 0x084 0x398 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT8__ARM_TRACE05 0x084 0x398 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x088 0x39c 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DAT9__EIM_DATA07 0x088 0x39c 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x088 0x39c 0x7fc 0x2 0x0 -#define MX6DL_PAD_CSI0_DAT9__KEY_ROW7 0x088 0x39c 0x8d4 0x3 0x0 -#define MX6DL_PAD_CSI0_DAT9__I2C1_SCL 0x088 0x39c 0x868 0x4 0x0 -#define MX6DL_PAD_CSI0_DAT9__GPIO5_IO27 0x088 0x39c 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DAT9__ARM_TRACE06 0x088 0x39c 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x08c 0x3a0 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_DATA_EN__EIM_DATA00 0x08c 0x3a0 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x08c 0x3a0 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x08c 0x3a0 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x090 0x3a4 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_MCLK__CCM_CLKO1 0x090 0x3a4 0x000 0x3 0x0 -#define MX6DL_PAD_CSI0_MCLK__GPIO5_IO19 0x090 0x3a4 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x090 0x3a4 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x094 0x3a8 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x094 0x3a8 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x094 0x3a8 0x000 0x7 0x0 -#define MX6DL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x098 0x3ac 0x000 0x0 0x0 -#define MX6DL_PAD_CSI0_VSYNC__EIM_DATA01 0x098 0x3ac 0x000 0x1 0x0 -#define MX6DL_PAD_CSI0_VSYNC__GPIO5_IO21 0x098 0x3ac 0x000 0x5 0x0 -#define MX6DL_PAD_CSI0_VSYNC__ARM_TRACE00 0x098 0x3ac 0x000 0x7 0x0 -#define MX6DL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x09c 0x3b0 0x000 0x0 0x0 -#define MX6DL_PAD_DI0_DISP_CLK__LCD_CLK 0x09c 0x3b0 0x000 0x1 0x0 -#define MX6DL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x09c 0x3b0 0x000 0x5 0x0 -#define MX6DL_PAD_DI0_DISP_CLK__LCD_WR_RWN 0x09c 0x3b0 0x000 0x8 0x0 -#define MX6DL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x0a0 0x3b4 0x000 0x0 0x0 -#define MX6DL_PAD_DI0_PIN15__LCD_ENABLE 0x0a0 0x3b4 0x000 0x1 0x0 -#define MX6DL_PAD_DI0_PIN15__AUD6_TXC 0x0a0 0x3b4 0x000 0x2 0x0 -#define MX6DL_PAD_DI0_PIN15__GPIO4_IO17 0x0a0 0x3b4 0x000 0x5 0x0 -#define MX6DL_PAD_DI0_PIN15__LCD_RD_E 0x0a0 0x3b4 0x000 0x8 0x0 -#define MX6DL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x0a4 0x3b8 0x000 0x0 0x0 -#define MX6DL_PAD_DI0_PIN2__LCD_HSYNC 0x0a4 0x3b8 0x8d8 0x1 0x0 -#define MX6DL_PAD_DI0_PIN2__AUD6_TXD 0x0a4 0x3b8 0x000 0x2 0x0 -#define MX6DL_PAD_DI0_PIN2__GPIO4_IO18 0x0a4 0x3b8 0x000 0x5 0x0 -#define MX6DL_PAD_DI0_PIN2__LCD_RS 0x0a4 0x3b8 0x000 0x8 0x0 -#define MX6DL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x0a8 0x3bc 0x000 0x0 0x0 -#define MX6DL_PAD_DI0_PIN3__LCD_VSYNC 0x0a8 0x3bc 0x000 0x1 0x0 -#define MX6DL_PAD_DI0_PIN3__AUD6_TXFS 0x0a8 0x3bc 0x000 0x2 0x0 -#define MX6DL_PAD_DI0_PIN3__GPIO4_IO19 0x0a8 0x3bc 0x000 0x5 0x0 -#define MX6DL_PAD_DI0_PIN3__LCD_CS 0x0a8 0x3bc 0x000 0x8 0x0 -#define MX6DL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x0ac 0x3c0 0x000 0x0 0x0 -#define MX6DL_PAD_DI0_PIN4__LCD_BUSY 0x0ac 0x3c0 0x8d8 0x1 0x1 -#define MX6DL_PAD_DI0_PIN4__AUD6_RXD 0x0ac 0x3c0 0x000 0x2 0x0 -#define MX6DL_PAD_DI0_PIN4__SD1_WP 0x0ac 0x3c0 0x92c 0x3 0x0 -#define MX6DL_PAD_DI0_PIN4__GPIO4_IO20 0x0ac 0x3c0 0x000 0x5 0x0 -#define MX6DL_PAD_DI0_PIN4__LCD_RESET 0x0ac 0x3c0 0x000 0x8 0x0 -#define MX6DL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x0b0 0x3c4 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT0__LCD_DATA00 0x0b0 0x3c4 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x0b0 0x3c4 0x000 0x2 0x0 -#define MX6DL_PAD_DISP0_DAT0__GPIO4_IO21 0x0b0 0x3c4 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x0b4 0x3c8 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT1__LCD_DATA01 0x0b4 0x3c8 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x0b4 0x3c8 0x000 0x2 0x0 -#define MX6DL_PAD_DISP0_DAT1__GPIO4_IO22 0x0b4 0x3c8 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x0b8 0x3cc 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT10__LCD_DATA10 0x0b8 0x3cc 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT10__GPIO4_IO31 0x0b8 0x3cc 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x0bc 0x3d0 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT11__LCD_DATA11 0x0bc 0x3d0 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT11__GPIO5_IO05 0x0bc 0x3d0 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x0c0 0x3d4 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT12__LCD_DATA12 0x0c0 0x3d4 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT12__GPIO5_IO06 0x0c0 0x3d4 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x0c4 0x3d8 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT13__LCD_DATA13 0x0c4 0x3d8 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT13__AUD5_RXFS 0x0c4 0x3d8 0x7bc 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT13__GPIO5_IO07 0x0c4 0x3d8 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x0c8 0x3dc 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT14__LCD_DATA14 0x0c8 0x3dc 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT14__AUD5_RXC 0x0c8 0x3dc 0x7b8 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT14__GPIO5_IO08 0x0c8 0x3dc 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x0cc 0x3e0 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT15__LCD_DATA15 0x0cc 0x3e0 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT15__ECSPI1_SS1 0x0cc 0x3e0 0x7e8 0x2 0x0 -#define MX6DL_PAD_DISP0_DAT15__ECSPI2_SS1 0x0cc 0x3e0 0x804 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT15__GPIO5_IO09 0x0cc 0x3e0 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x0d0 0x3e4 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT16__LCD_DATA16 0x0d0 0x3e4 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x0d0 0x3e4 0x7fc 0x2 0x1 -#define MX6DL_PAD_DISP0_DAT16__AUD5_TXC 0x0d0 0x3e4 0x7c0 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x0d0 0x3e4 0x8e8 0x4 0x0 -#define MX6DL_PAD_DISP0_DAT16__GPIO5_IO10 0x0d0 0x3e4 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x0d4 0x3e8 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT17__LCD_DATA17 0x0d4 0x3e8 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT17__ECSPI2_MISO 0x0d4 0x3e8 0x7f8 0x2 0x1 -#define MX6DL_PAD_DISP0_DAT17__AUD5_TXD 0x0d4 0x3e8 0x7b4 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x0d4 0x3e8 0x8ec 0x4 0x0 -#define MX6DL_PAD_DISP0_DAT17__GPIO5_IO11 0x0d4 0x3e8 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x0d8 0x3ec 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT18__LCD_DATA18 0x0d8 0x3ec 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT18__ECSPI2_SS0 0x0d8 0x3ec 0x800 0x2 0x1 -#define MX6DL_PAD_DISP0_DAT18__AUD5_TXFS 0x0d8 0x3ec 0x7c4 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT18__AUD4_RXFS 0x0d8 0x3ec 0x7a4 0x4 0x0 -#define MX6DL_PAD_DISP0_DAT18__GPIO5_IO12 0x0d8 0x3ec 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT18__EIM_CS2_B 0x0d8 0x3ec 0x000 0x7 0x0 -#define MX6DL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x0dc 0x3f0 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT19__LCD_DATA19 0x0dc 0x3f0 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x0dc 0x3f0 0x7f4 0x2 0x1 -#define MX6DL_PAD_DISP0_DAT19__AUD5_RXD 0x0dc 0x3f0 0x7b0 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT19__AUD4_RXC 0x0dc 0x3f0 0x7a0 0x4 0x0 -#define MX6DL_PAD_DISP0_DAT19__GPIO5_IO13 0x0dc 0x3f0 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT19__EIM_CS3_B 0x0dc 0x3f0 0x000 0x7 0x0 -#define MX6DL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x0e0 0x3f4 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT2__LCD_DATA02 0x0e0 0x3f4 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT2__ECSPI3_MISO 0x0e0 0x3f4 0x000 0x2 0x0 -#define MX6DL_PAD_DISP0_DAT2__GPIO4_IO23 0x0e0 0x3f4 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x0e4 0x3f8 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT20__LCD_DATA20 0x0e4 0x3f8 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT20__ECSPI1_SCLK 0x0e4 0x3f8 0x7d8 0x2 0x1 -#define MX6DL_PAD_DISP0_DAT20__AUD4_TXC 0x0e4 0x3f8 0x7a8 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT20__GPIO5_IO14 0x0e4 0x3f8 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x0e8 0x3fc 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT21__LCD_DATA21 0x0e8 0x3fc 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT21__ECSPI1_MOSI 0x0e8 0x3fc 0x7e0 0x2 0x1 -#define MX6DL_PAD_DISP0_DAT21__AUD4_TXD 0x0e8 0x3fc 0x79c 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT21__GPIO5_IO15 0x0e8 0x3fc 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x0ec 0x400 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT22__LCD_DATA22 0x0ec 0x400 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT22__ECSPI1_MISO 0x0ec 0x400 0x7dc 0x2 0x1 -#define MX6DL_PAD_DISP0_DAT22__AUD4_TXFS 0x0ec 0x400 0x7ac 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT22__GPIO5_IO16 0x0ec 0x400 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x0f0 0x404 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT23__LCD_DATA23 0x0f0 0x404 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT23__ECSPI1_SS0 0x0f0 0x404 0x7e4 0x2 0x1 -#define MX6DL_PAD_DISP0_DAT23__AUD4_RXD 0x0f0 0x404 0x798 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT23__GPIO5_IO17 0x0f0 0x404 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x0f4 0x408 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT3__LCD_DATA03 0x0f4 0x408 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT3__ECSPI3_SS0 0x0f4 0x408 0x000 0x2 0x0 -#define MX6DL_PAD_DISP0_DAT3__GPIO4_IO24 0x0f4 0x408 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x0f8 0x40c 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT4__LCD_DATA04 0x0f8 0x40c 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT4__ECSPI3_SS1 0x0f8 0x40c 0x000 0x2 0x0 -#define MX6DL_PAD_DISP0_DAT4__GPIO4_IO25 0x0f8 0x40c 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x0fc 0x410 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT5__LCD_DATA05 0x0fc 0x410 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT5__ECSPI3_SS2 0x0fc 0x410 0x000 0x2 0x0 -#define MX6DL_PAD_DISP0_DAT5__AUD6_RXFS 0x0fc 0x410 0x000 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT5__GPIO4_IO26 0x0fc 0x410 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100 0x414 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT6__LCD_DATA06 0x100 0x414 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT6__ECSPI3_SS3 0x100 0x414 0x000 0x2 0x0 -#define MX6DL_PAD_DISP0_DAT6__AUD6_RXC 0x100 0x414 0x000 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT6__GPIO4_IO27 0x100 0x414 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x104 0x418 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT7__LCD_DATA07 0x104 0x418 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT7__ECSPI3_RDY 0x104 0x418 0x000 0x2 0x0 -#define MX6DL_PAD_DISP0_DAT7__GPIO4_IO28 0x104 0x418 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x108 0x41c 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT8__LCD_DATA08 0x108 0x41c 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT8__PWM1_OUT 0x108 0x41c 0x000 0x2 0x0 -#define MX6DL_PAD_DISP0_DAT8__WDOG1_B 0x108 0x41c 0x000 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT8__GPIO4_IO29 0x108 0x41c 0x000 0x5 0x0 -#define MX6DL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10c 0x420 0x000 0x0 0x0 -#define MX6DL_PAD_DISP0_DAT9__LCD_DATA09 0x10c 0x420 0x000 0x1 0x0 -#define MX6DL_PAD_DISP0_DAT9__PWM2_OUT 0x10c 0x420 0x000 0x2 0x0 -#define MX6DL_PAD_DISP0_DAT9__WDOG2_B 0x10c 0x420 0x000 0x3 0x0 -#define MX6DL_PAD_DISP0_DAT9__GPIO4_IO30 0x10c 0x420 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_A16__EIM_ADDR16 0x110 0x4e0 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x110 0x4e0 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x110 0x4e0 0x8b8 0x2 0x0 -#define MX6DL_PAD_EIM_A16__GPIO2_IO22 0x110 0x4e0 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_A16__SRC_BOOT_CFG16 0x110 0x4e0 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_A16__EPDC_DATA00 0x110 0x4e0 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_A17__EIM_ADDR17 0x114 0x4e4 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x114 0x4e4 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x114 0x4e4 0x890 0x2 0x0 -#define MX6DL_PAD_EIM_A17__GPIO2_IO21 0x114 0x4e4 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_A17__SRC_BOOT_CFG17 0x114 0x4e4 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_A17__EPDC_PWR_STAT 0x114 0x4e4 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_A18__EIM_ADDR18 0x118 0x4e8 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x118 0x4e8 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_A18__IPU1_CSI1_DATA13 0x118 0x4e8 0x894 0x2 0x0 -#define MX6DL_PAD_EIM_A18__GPIO2_IO20 0x118 0x4e8 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_A18__SRC_BOOT_CFG18 0x118 0x4e8 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_A18__EPDC_PWR_CTRL0 0x118 0x4e8 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_A19__EIM_ADDR19 0x11c 0x4ec 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x11c 0x4ec 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_A19__IPU1_CSI1_DATA14 0x11c 0x4ec 0x898 0x2 0x0 -#define MX6DL_PAD_EIM_A19__GPIO2_IO19 0x11c 0x4ec 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_A19__SRC_BOOT_CFG19 0x11c 0x4ec 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_A19__EPDC_PWR_CTRL1 0x11c 0x4ec 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_A20__EIM_ADDR20 0x120 0x4f0 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x120 0x4f0 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_A20__IPU1_CSI1_DATA15 0x120 0x4f0 0x89c 0x2 0x0 -#define MX6DL_PAD_EIM_A20__GPIO2_IO18 0x120 0x4f0 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_A20__SRC_BOOT_CFG20 0x120 0x4f0 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_A20__EPDC_PWR_CTRL2 0x120 0x4f0 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_A21__EIM_ADDR21 0x124 0x4f4 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x124 0x4f4 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_A21__IPU1_CSI1_DATA16 0x124 0x4f4 0x8a0 0x2 0x0 -#define MX6DL_PAD_EIM_A21__GPIO2_IO17 0x124 0x4f4 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_A21__SRC_BOOT_CFG21 0x124 0x4f4 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_A21__EPDC_GDCLK 0x124 0x4f4 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_A22__EIM_ADDR22 0x128 0x4f8 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x128 0x4f8 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_A22__IPU1_CSI1_DATA17 0x128 0x4f8 0x8a4 0x2 0x0 -#define MX6DL_PAD_EIM_A22__GPIO2_IO16 0x128 0x4f8 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_A22__SRC_BOOT_CFG22 0x128 0x4f8 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_A22__EPDC_GDSP 0x128 0x4f8 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_A23__EIM_ADDR23 0x12c 0x4fc 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x12c 0x4fc 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_A23__IPU1_CSI1_DATA18 0x12c 0x4fc 0x8a8 0x2 0x0 -#define MX6DL_PAD_EIM_A23__IPU1_SISG3 0x12c 0x4fc 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_A23__GPIO6_IO06 0x12c 0x4fc 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_A23__SRC_BOOT_CFG23 0x12c 0x4fc 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_A23__EPDC_GDOE 0x12c 0x4fc 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_A24__EIM_ADDR24 0x130 0x500 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x130 0x500 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_A24__IPU1_CSI1_DATA19 0x130 0x500 0x8ac 0x2 0x0 -#define MX6DL_PAD_EIM_A24__IPU1_SISG2 0x130 0x500 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_A24__GPIO5_IO04 0x130 0x500 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_A24__SRC_BOOT_CFG24 0x130 0x500 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_A24__EPDC_GDRL 0x130 0x500 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_A25__EIM_ADDR25 0x134 0x504 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_A25__ECSPI4_SS1 0x134 0x504 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_A25__ECSPI2_RDY 0x134 0x504 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_A25__IPU1_DI1_PIN12 0x134 0x504 0x000 0x3 0x0 -#define MX6DL_PAD_EIM_A25__IPU1_DI0_D1_CS 0x134 0x504 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_A25__GPIO5_IO02 0x134 0x504 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x134 0x504 0x85c 0x6 0x0 -#define MX6DL_PAD_EIM_A25__EPDC_DATA15 0x134 0x504 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_A25__EIM_ACLK_FREERUN 0x134 0x504 0x000 0x9 0x0 -#define MX6DL_PAD_EIM_BCLK__EIM_BCLK 0x138 0x508 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x138 0x508 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_BCLK__GPIO6_IO31 0x138 0x508 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_BCLK__EPDC_SDCE9 0x138 0x508 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_CS0__EIM_CS0_B 0x13c 0x50c 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_CS0__IPU1_DI1_PIN05 0x13c 0x50c 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_CS0__ECSPI2_SCLK 0x13c 0x50c 0x7f4 0x2 0x2 -#define MX6DL_PAD_EIM_CS0__GPIO2_IO23 0x13c 0x50c 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_CS0__EPDC_DATA06 0x13c 0x50c 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_CS1__EIM_CS1_B 0x140 0x510 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_CS1__IPU1_DI1_PIN06 0x140 0x510 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_CS1__ECSPI2_MOSI 0x140 0x510 0x7fc 0x2 0x2 -#define MX6DL_PAD_EIM_CS1__GPIO2_IO24 0x140 0x510 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_CS1__EPDC_DATA08 0x140 0x510 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D16__EIM_DATA16 0x144 0x514 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x144 0x514 0x7d8 0x1 0x2 -#define MX6DL_PAD_EIM_D16__IPU1_DI0_PIN05 0x144 0x514 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x144 0x514 0x8a8 0x3 0x1 -#define MX6DL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x144 0x514 0x864 0x4 0x0 -#define MX6DL_PAD_EIM_D16__GPIO3_IO16 0x144 0x514 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D16__I2C2_SDA 0x144 0x514 0x874 0x6 0x0 -#define MX6DL_PAD_EIM_D16__EPDC_DATA10 0x144 0x514 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D17__EIM_DATA17 0x148 0x518 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D17__ECSPI1_MISO 0x148 0x518 0x7dc 0x1 0x2 -#define MX6DL_PAD_EIM_D17__IPU1_DI0_PIN06 0x148 0x518 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0x148 0x518 0x8b8 0x3 0x1 -#define MX6DL_PAD_EIM_D17__DCIC1_OUT 0x148 0x518 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_D17__GPIO3_IO17 0x148 0x518 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D17__I2C3_SCL 0x148 0x518 0x878 0x6 0x0 -#define MX6DL_PAD_EIM_D17__EPDC_VCOM0 0x148 0x518 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D18__EIM_DATA18 0x14c 0x51c 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D18__ECSPI1_MOSI 0x14c 0x51c 0x7e0 0x1 0x2 -#define MX6DL_PAD_EIM_D18__IPU1_DI0_PIN07 0x14c 0x51c 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x14c 0x51c 0x8a4 0x3 0x1 -#define MX6DL_PAD_EIM_D18__IPU1_DI1_D0_CS 0x14c 0x51c 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_D18__GPIO3_IO18 0x14c 0x51c 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D18__I2C3_SDA 0x14c 0x51c 0x87c 0x6 0x0 -#define MX6DL_PAD_EIM_D18__EPDC_VCOM1 0x14c 0x51c 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D19__EIM_DATA19 0x150 0x520 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D19__ECSPI1_SS1 0x150 0x520 0x7e8 0x1 0x1 -#define MX6DL_PAD_EIM_D19__IPU1_DI0_PIN08 0x150 0x520 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x150 0x520 0x8a0 0x3 0x1 -#define MX6DL_PAD_EIM_D19__UART1_CTS_B 0x150 0x520 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_D19__UART1_RTS_B 0x150 0x520 0x8f8 0x4 0x0 -#define MX6DL_PAD_EIM_D19__GPIO3_IO19 0x150 0x520 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D19__EPIT1_OUT 0x150 0x520 0x000 0x6 0x0 -#define MX6DL_PAD_EIM_D19__EPDC_DATA12 0x150 0x520 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D20__EIM_DATA20 0x154 0x524 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D20__ECSPI4_SS0 0x154 0x524 0x808 0x1 0x0 -#define MX6DL_PAD_EIM_D20__IPU1_DI0_PIN16 0x154 0x524 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x154 0x524 0x89c 0x3 0x1 -#define MX6DL_PAD_EIM_D20__UART1_RTS_B 0x154 0x524 0x8f8 0x4 0x1 -#define MX6DL_PAD_EIM_D20__UART1_CTS_B 0x154 0x524 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_D20__GPIO3_IO20 0x154 0x524 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D20__EPIT2_OUT 0x154 0x524 0x000 0x6 0x0 -#define MX6DL_PAD_EIM_D21__EIM_DATA21 0x158 0x528 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D21__ECSPI4_SCLK 0x158 0x528 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_D21__IPU1_DI0_PIN17 0x158 0x528 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D21__IPU1_CSI1_DATA11 0x158 0x528 0x88c 0x3 0x0 -#define MX6DL_PAD_EIM_D21__USB_OTG_OC 0x158 0x528 0x920 0x4 0x0 -#define MX6DL_PAD_EIM_D21__GPIO3_IO21 0x158 0x528 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D21__I2C1_SCL 0x158 0x528 0x868 0x6 0x1 -#define MX6DL_PAD_EIM_D21__SPDIF_IN 0x158 0x528 0x8f0 0x7 0x0 -#define MX6DL_PAD_EIM_D22__EIM_DATA22 0x15c 0x52c 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D22__ECSPI4_MISO 0x15c 0x52c 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_D22__IPU1_DI0_PIN01 0x15c 0x52c 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D22__IPU1_CSI1_DATA10 0x15c 0x52c 0x888 0x3 0x0 -#define MX6DL_PAD_EIM_D22__USB_OTG_PWR 0x15c 0x52c 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_D22__GPIO3_IO22 0x15c 0x52c 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D22__SPDIF_OUT 0x15c 0x52c 0x000 0x6 0x0 -#define MX6DL_PAD_EIM_D22__EPDC_SDCE6 0x15c 0x52c 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D23__EIM_DATA23 0x160 0x530 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D23__IPU1_DI0_D0_CS 0x160 0x530 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_D23__UART3_CTS_B 0x160 0x530 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D23__UART3_RTS_B 0x160 0x530 0x908 0x2 0x0 -#define MX6DL_PAD_EIM_D23__UART1_DCD_B 0x160 0x530 0x000 0x3 0x0 -#define MX6DL_PAD_EIM_D23__IPU1_CSI1_DATA_EN 0x160 0x530 0x8b0 0x4 0x0 -#define MX6DL_PAD_EIM_D23__GPIO3_IO23 0x160 0x530 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D23__IPU1_DI1_PIN02 0x160 0x530 0x000 0x6 0x0 -#define MX6DL_PAD_EIM_D23__IPU1_DI1_PIN14 0x160 0x530 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_D23__EPDC_DATA11 0x160 0x530 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D24__EIM_DATA24 0x164 0x534 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D24__ECSPI4_SS2 0x164 0x534 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x164 0x534 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D24__UART3_RX_DATA 0x164 0x534 0x90c 0x2 0x0 -#define MX6DL_PAD_EIM_D24__ECSPI1_SS2 0x164 0x534 0x7ec 0x3 0x0 -#define MX6DL_PAD_EIM_D24__ECSPI2_SS2 0x164 0x534 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_D24__GPIO3_IO24 0x164 0x534 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D24__AUD5_RXFS 0x164 0x534 0x7bc 0x6 0x1 -#define MX6DL_PAD_EIM_D24__UART1_DTR_B 0x164 0x534 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_D24__EPDC_SDCE7 0x164 0x534 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D25__EIM_DATA25 0x168 0x538 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D25__ECSPI4_SS3 0x168 0x538 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x168 0x538 0x90c 0x2 0x1 -#define MX6DL_PAD_EIM_D25__UART3_TX_DATA 0x168 0x538 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D25__ECSPI1_SS3 0x168 0x538 0x7f0 0x3 0x0 -#define MX6DL_PAD_EIM_D25__ECSPI2_SS3 0x168 0x538 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_D25__GPIO3_IO25 0x168 0x538 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D25__AUD5_RXC 0x168 0x538 0x7b8 0x6 0x1 -#define MX6DL_PAD_EIM_D25__UART1_DSR_B 0x168 0x538 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_D25__EPDC_SDCE8 0x168 0x538 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D26__EIM_DATA26 0x16c 0x53c 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D26__IPU1_DI1_PIN11 0x16c 0x53c 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_D26__IPU1_CSI0_DATA01 0x16c 0x53c 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x16c 0x53c 0x898 0x3 0x1 -#define MX6DL_PAD_EIM_D26__UART2_TX_DATA 0x16c 0x53c 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_D26__UART2_RX_DATA 0x16c 0x53c 0x904 0x4 0x0 -#define MX6DL_PAD_EIM_D26__GPIO3_IO26 0x16c 0x53c 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D26__IPU1_SISG2 0x16c 0x53c 0x000 0x6 0x0 -#define MX6DL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x16c 0x53c 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_D26__EPDC_SDOED 0x16c 0x53c 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D27__EIM_DATA27 0x170 0x540 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D27__IPU1_DI1_PIN13 0x170 0x540 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_D27__IPU1_CSI0_DATA00 0x170 0x540 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x170 0x540 0x894 0x3 0x1 -#define MX6DL_PAD_EIM_D27__UART2_RX_DATA 0x170 0x540 0x904 0x4 0x1 -#define MX6DL_PAD_EIM_D27__UART2_TX_DATA 0x170 0x540 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_D27__GPIO3_IO27 0x170 0x540 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D27__IPU1_SISG3 0x170 0x540 0x000 0x6 0x0 -#define MX6DL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x170 0x540 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_D27__EPDC_SDOE 0x170 0x540 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D28__EIM_DATA28 0x174 0x544 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D28__I2C1_SDA 0x174 0x544 0x86c 0x1 0x1 -#define MX6DL_PAD_EIM_D28__ECSPI4_MOSI 0x174 0x544 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D28__IPU1_CSI1_DATA12 0x174 0x544 0x890 0x3 0x1 -#define MX6DL_PAD_EIM_D28__UART2_CTS_B 0x174 0x544 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_D28__UART2_RTS_B 0x174 0x544 0x900 0x4 0x0 -#define MX6DL_PAD_EIM_D28__GPIO3_IO28 0x174 0x544 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D28__IPU1_EXT_TRIG 0x174 0x544 0x000 0x6 0x0 -#define MX6DL_PAD_EIM_D28__IPU1_DI0_PIN13 0x174 0x544 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_D28__EPDC_PWR_CTRL3 0x174 0x544 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D29__EIM_DATA29 0x178 0x548 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D29__IPU1_DI1_PIN15 0x178 0x548 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_D29__ECSPI4_SS0 0x178 0x548 0x808 0x2 0x1 -#define MX6DL_PAD_EIM_D29__UART2_RTS_B 0x178 0x548 0x900 0x4 0x1 -#define MX6DL_PAD_EIM_D29__UART2_CTS_B 0x178 0x548 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_D29__GPIO3_IO29 0x178 0x548 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x178 0x548 0x8bc 0x6 0x0 -#define MX6DL_PAD_EIM_D29__IPU1_DI0_PIN14 0x178 0x548 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_D29__EPDC_PWR_WAKE 0x178 0x548 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D30__EIM_DATA30 0x17c 0x54c 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x17c 0x54c 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_D30__IPU1_DI0_PIN11 0x17c 0x54c 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D30__IPU1_CSI0_DATA03 0x17c 0x54c 0x000 0x3 0x0 -#define MX6DL_PAD_EIM_D30__UART3_CTS_B 0x17c 0x54c 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_D30__UART3_RTS_B 0x17c 0x54c 0x908 0x4 0x1 -#define MX6DL_PAD_EIM_D30__GPIO3_IO30 0x17c 0x54c 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D30__USB_H1_OC 0x17c 0x54c 0x924 0x6 0x0 -#define MX6DL_PAD_EIM_D30__EPDC_SDOEZ 0x17c 0x54c 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D31__EIM_DATA31 0x180 0x550 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x180 0x550 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_D31__IPU1_DI0_PIN12 0x180 0x550 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_D31__IPU1_CSI0_DATA02 0x180 0x550 0x000 0x3 0x0 -#define MX6DL_PAD_EIM_D31__UART3_RTS_B 0x180 0x550 0x908 0x4 0x2 -#define MX6DL_PAD_EIM_D31__UART3_CTS_B 0x180 0x550 0x000 0x4 0x0 -#define MX6DL_PAD_EIM_D31__GPIO3_IO31 0x180 0x550 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_D31__USB_H1_PWR 0x180 0x550 0x000 0x6 0x0 -#define MX6DL_PAD_EIM_D31__EPDC_SDCLK_P 0x180 0x550 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_D31__EIM_ACLK_FREERUN 0x180 0x550 0x000 0x9 0x0 -#define MX6DL_PAD_EIM_DA0__EIM_AD00 0x184 0x554 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x184 0x554 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA0__IPU1_CSI1_DATA09 0x184 0x554 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_DA0__GPIO3_IO00 0x184 0x554 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA0__SRC_BOOT_CFG00 0x184 0x554 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA0__EPDC_SDCLK_N 0x184 0x554 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA1__EIM_AD01 0x188 0x558 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x188 0x558 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA1__IPU1_CSI1_DATA08 0x188 0x558 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_DA1__GPIO3_IO01 0x188 0x558 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA1__SRC_BOOT_CFG01 0x188 0x558 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA1__EPDC_SDLE 0x188 0x558 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA10__EIM_AD10 0x18c 0x55c 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x18c 0x55c 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN 0x18c 0x55c 0x8b0 0x2 0x1 -#define MX6DL_PAD_EIM_DA10__GPIO3_IO10 0x18c 0x55c 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA10__SRC_BOOT_CFG10 0x18c 0x55c 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA10__EPDC_DATA01 0x18c 0x55c 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA11__EIM_AD11 0x190 0x560 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x190 0x560 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA11__IPU1_CSI1_HSYNC 0x190 0x560 0x8b4 0x2 0x0 -#define MX6DL_PAD_EIM_DA11__GPIO3_IO11 0x190 0x560 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA11__SRC_BOOT_CFG11 0x190 0x560 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA11__EPDC_DATA03 0x190 0x560 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA12__EIM_AD12 0x194 0x564 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x194 0x564 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA12__IPU1_CSI1_VSYNC 0x194 0x564 0x8bc 0x2 0x1 -#define MX6DL_PAD_EIM_DA12__GPIO3_IO12 0x194 0x564 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA12__SRC_BOOT_CFG12 0x194 0x564 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA12__EPDC_DATA02 0x194 0x564 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA13__EIM_AD13 0x198 0x568 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x198 0x568 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA13__GPIO3_IO13 0x198 0x568 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA13__SRC_BOOT_CFG13 0x198 0x568 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA13__EPDC_DATA13 0x198 0x568 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA14__EIM_AD14 0x19c 0x56c 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x19c 0x56c 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA14__GPIO3_IO14 0x19c 0x56c 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA14__SRC_BOOT_CFG14 0x19c 0x56c 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA14__EPDC_DATA14 0x19c 0x56c 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA15__EIM_AD15 0x1a0 0x570 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA15__IPU1_DI1_PIN01 0x1a0 0x570 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA15__IPU1_DI1_PIN04 0x1a0 0x570 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_DA15__GPIO3_IO15 0x1a0 0x570 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA15__SRC_BOOT_CFG15 0x1a0 0x570 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA15__EPDC_DATA09 0x1a0 0x570 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA2__EIM_AD02 0x1a4 0x574 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x1a4 0x574 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA2__IPU1_CSI1_DATA07 0x1a4 0x574 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_DA2__GPIO3_IO02 0x1a4 0x574 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA2__SRC_BOOT_CFG02 0x1a4 0x574 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA2__EPDC_BDR0 0x1a4 0x574 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA3__EIM_AD03 0x1a8 0x578 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x1a8 0x578 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA3__IPU1_CSI1_DATA06 0x1a8 0x578 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_DA3__GPIO3_IO03 0x1a8 0x578 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA3__SRC_BOOT_CFG03 0x1a8 0x578 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA3__EPDC_BDR1 0x1a8 0x578 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA4__EIM_AD04 0x1ac 0x57c 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x1ac 0x57c 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA4__IPU1_CSI1_DATA05 0x1ac 0x57c 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_DA4__GPIO3_IO04 0x1ac 0x57c 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA4__SRC_BOOT_CFG04 0x1ac 0x57c 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA4__EPDC_SDCE0 0x1ac 0x57c 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA5__EIM_AD05 0x1b0 0x580 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x1b0 0x580 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA5__IPU1_CSI1_DATA04 0x1b0 0x580 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_DA5__GPIO3_IO05 0x1b0 0x580 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA5__SRC_BOOT_CFG05 0x1b0 0x580 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA5__EPDC_SDCE1 0x1b0 0x580 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA6__EIM_AD06 0x1b4 0x584 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x1b4 0x584 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA6__IPU1_CSI1_DATA03 0x1b4 0x584 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_DA6__GPIO3_IO06 0x1b4 0x584 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA6__SRC_BOOT_CFG06 0x1b4 0x584 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA6__EPDC_SDCE2 0x1b4 0x584 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA7__EIM_AD07 0x1b8 0x588 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x1b8 0x588 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA7__IPU1_CSI1_DATA02 0x1b8 0x588 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_DA7__GPIO3_IO07 0x1b8 0x588 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA7__SRC_BOOT_CFG07 0x1b8 0x588 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA7__EPDC_SDCE3 0x1b8 0x588 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA8__EIM_AD08 0x1bc 0x58c 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x1bc 0x58c 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA8__IPU1_CSI1_DATA01 0x1bc 0x58c 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_DA8__GPIO3_IO08 0x1bc 0x58c 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA8__SRC_BOOT_CFG08 0x1bc 0x58c 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA8__EPDC_SDCE4 0x1bc 0x58c 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_DA9__EIM_AD09 0x1c0 0x590 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x1c0 0x590 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_DA9__IPU1_CSI1_DATA00 0x1c0 0x590 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_DA9__GPIO3_IO09 0x1c0 0x590 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_DA9__SRC_BOOT_CFG09 0x1c0 0x590 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_DA9__EPDC_SDCE5 0x1c0 0x590 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_EB0__EIM_EB0_B 0x1c4 0x594 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x1c4 0x594 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_EB0__IPU1_CSI1_DATA11 0x1c4 0x594 0x88c 0x2 0x1 -#define MX6DL_PAD_EIM_EB0__CCM_PMIC_READY 0x1c4 0x594 0x7d4 0x4 0x0 -#define MX6DL_PAD_EIM_EB0__GPIO2_IO28 0x1c4 0x594 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_EB0__SRC_BOOT_CFG27 0x1c4 0x594 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_EB0__EPDC_PWR_COM 0x1c4 0x594 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_EB1__EIM_EB1_B 0x1c8 0x598 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x1c8 0x598 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_EB1__IPU1_CSI1_DATA10 0x1c8 0x598 0x888 0x2 0x1 -#define MX6DL_PAD_EIM_EB1__GPIO2_IO29 0x1c8 0x598 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_EB1__SRC_BOOT_CFG28 0x1c8 0x598 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_EB1__EPDC_SDSHR 0x1c8 0x598 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_EB2__EIM_EB2_B 0x1cc 0x59c 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_EB2__ECSPI1_SS0 0x1cc 0x59c 0x7e4 0x1 0x2 -#define MX6DL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1cc 0x59c 0x8ac 0x3 0x1 -#define MX6DL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x1cc 0x59c 0x860 0x4 0x0 -#define MX6DL_PAD_EIM_EB2__GPIO2_IO30 0x1cc 0x59c 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_EB2__I2C2_SCL 0x1cc 0x59c 0x870 0x6 0x0 -#define MX6DL_PAD_EIM_EB2__SRC_BOOT_CFG30 0x1cc 0x59c 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_EB2__EPDC_DATA05 0x1cc 0x59c 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_EB3__EIM_EB3_B 0x1d0 0x5a0 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_EB3__ECSPI4_RDY 0x1d0 0x5a0 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_EB3__UART3_RTS_B 0x1d0 0x5a0 0x908 0x2 0x3 -#define MX6DL_PAD_EIM_EB3__UART3_CTS_B 0x1d0 0x5a0 0x000 0x2 0x0 -#define MX6DL_PAD_EIM_EB3__UART1_RI_B 0x1d0 0x5a0 0x000 0x3 0x0 -#define MX6DL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1d0 0x5a0 0x8b4 0x4 0x1 -#define MX6DL_PAD_EIM_EB3__GPIO2_IO31 0x1d0 0x5a0 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_EB3__IPU1_DI1_PIN03 0x1d0 0x5a0 0x000 0x6 0x0 -#define MX6DL_PAD_EIM_EB3__SRC_BOOT_CFG31 0x1d0 0x5a0 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_EB3__EPDC_SDCE0 0x1d0 0x5a0 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_EB3__EIM_ACLK_FREERUN 0x1d0 0x5a0 0x000 0x9 0x0 -#define MX6DL_PAD_EIM_LBA__EIM_LBA_B 0x1d4 0x5a4 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_LBA__IPU1_DI1_PIN17 0x1d4 0x5a4 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_LBA__ECSPI2_SS1 0x1d4 0x5a4 0x804 0x2 0x1 -#define MX6DL_PAD_EIM_LBA__GPIO2_IO27 0x1d4 0x5a4 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_LBA__SRC_BOOT_CFG26 0x1d4 0x5a4 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_LBA__EPDC_DATA04 0x1d4 0x5a4 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_OE__EIM_OE_B 0x1d8 0x5a8 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_OE__IPU1_DI1_PIN07 0x1d8 0x5a8 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_OE__ECSPI2_MISO 0x1d8 0x5a8 0x7f8 0x2 0x2 -#define MX6DL_PAD_EIM_OE__GPIO2_IO25 0x1d8 0x5a8 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_OE__EPDC_PWR_IRQ 0x1d8 0x5a8 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_RW__EIM_RW 0x1dc 0x5ac 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_RW__IPU1_DI1_PIN08 0x1dc 0x5ac 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_RW__ECSPI2_SS0 0x1dc 0x5ac 0x800 0x2 0x2 -#define MX6DL_PAD_EIM_RW__GPIO2_IO26 0x1dc 0x5ac 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_RW__SRC_BOOT_CFG29 0x1dc 0x5ac 0x000 0x7 0x0 -#define MX6DL_PAD_EIM_RW__EPDC_DATA07 0x1dc 0x5ac 0x000 0x8 0x0 -#define MX6DL_PAD_EIM_WAIT__EIM_WAIT_B 0x1e0 0x5b0 0x000 0x0 0x0 -#define MX6DL_PAD_EIM_WAIT__EIM_DTACK_B 0x1e0 0x5b0 0x000 0x1 0x0 -#define MX6DL_PAD_EIM_WAIT__GPIO5_IO00 0x1e0 0x5b0 0x000 0x5 0x0 -#define MX6DL_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x1e0 0x5b0 0x000 0x7 0x0 -#define MX6DL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1e4 0x5b4 0x828 0x1 0x0 -#define MX6DL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1e4 0x5b4 0x840 0x2 0x0 -#define MX6DL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1e4 0x5b4 0x8f4 0x3 0x0 -#define MX6DL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1e4 0x5b4 0x000 0x5 0x0 -#define MX6DL_PAD_ENET_MDC__MLB_DATA 0x1e8 0x5b8 0x8e0 0x0 0x0 -#define MX6DL_PAD_ENET_MDC__ENET_MDC 0x1e8 0x5b8 0x000 0x1 0x0 -#define MX6DL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1e8 0x5b8 0x858 0x2 0x0 -#define MX6DL_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1e8 0x5b8 0x000 0x4 0x0 -#define MX6DL_PAD_ENET_MDC__GPIO1_IO31 0x1e8 0x5b8 0x000 0x5 0x0 -#define MX6DL_PAD_ENET_MDIO__ENET_MDIO 0x1ec 0x5bc 0x810 0x1 0x0 -#define MX6DL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1ec 0x5bc 0x83c 0x2 0x0 -#define MX6DL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1ec 0x5bc 0x000 0x4 0x0 -#define MX6DL_PAD_ENET_MDIO__GPIO1_IO22 0x1ec 0x5bc 0x000 0x5 0x0 -#define MX6DL_PAD_ENET_MDIO__SPDIF_LOCK 0x1ec 0x5bc 0x000 0x6 0x0 -#define MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1f0 0x5c0 0x000 0x1 0x0 -#define MX6DL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1f0 0x5c0 0x82c 0x2 0x0 -#define MX6DL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1f0 0x5c0 0x000 0x5 0x0 -#define MX6DL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1f0 0x5c0 0x000 0x6 0x0 -#define MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f4 0x5c4 0x790 0x0 0x0 -#define MX6DL_PAD_ENET_RX_ER__ENET_RX_ER 0x1f4 0x5c4 0x000 0x1 0x0 -#define MX6DL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1f4 0x5c4 0x834 0x2 0x0 -#define MX6DL_PAD_ENET_RX_ER__SPDIF_IN 0x1f4 0x5c4 0x8f0 0x3 0x1 -#define MX6DL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0 -#define MX6DL_PAD_ENET_RX_ER__GPIO1_IO24 0x1f4 0x5c4 0x000 0x5 0x0 -#define MX6DL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1f8 0x5c8 0x818 0x1 0x0 -#define MX6DL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1f8 0x5c8 0x838 0x2 0x0 -#define MX6DL_PAD_ENET_RXD0__SPDIF_OUT 0x1f8 0x5c8 0x000 0x3 0x0 -#define MX6DL_PAD_ENET_RXD0__GPIO1_IO27 0x1f8 0x5c8 0x000 0x5 0x0 -#define MX6DL_PAD_ENET_RXD1__MLB_SIG 0x1fc 0x5cc 0x8e4 0x0 0x0 -#define MX6DL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1fc 0x5cc 0x81c 0x1 0x0 -#define MX6DL_PAD_ENET_RXD1__ESAI_TX_FS 0x1fc 0x5cc 0x830 0x2 0x0 -#define MX6DL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1fc 0x5cc 0x000 0x4 0x0 -#define MX6DL_PAD_ENET_RXD1__GPIO1_IO26 0x1fc 0x5cc 0x000 0x5 0x0 -#define MX6DL_PAD_ENET_TX_EN__ENET_TX_EN 0x200 0x5d0 0x000 0x1 0x0 -#define MX6DL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x200 0x5d0 0x850 0x2 0x0 -#define MX6DL_PAD_ENET_TX_EN__GPIO1_IO28 0x200 0x5d0 0x000 0x5 0x0 -#define MX6DL_PAD_ENET_TX_EN__I2C4_SCL 0x200 0x5d0 0x880 0x9 0x0 -#define MX6DL_PAD_ENET_TXD0__ENET_TX_DATA0 0x204 0x5d4 0x000 0x1 0x0 -#define MX6DL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x204 0x5d4 0x854 0x2 0x0 -#define MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x204 0x5d4 0x000 0x5 0x0 -#define MX6DL_PAD_ENET_TXD1__MLB_CLK 0x208 0x5d8 0x8dc 0x0 0x0 -#define MX6DL_PAD_ENET_TXD1__ENET_TX_DATA1 0x208 0x5d8 0x000 0x1 0x0 -#define MX6DL_PAD_ENET_TXD1__ESAI_TX2_RX3 0x208 0x5d8 0x84c 0x2 0x0 -#define MX6DL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x208 0x5d8 0x000 0x4 0x0 -#define MX6DL_PAD_ENET_TXD1__GPIO1_IO29 0x208 0x5d8 0x000 0x5 0x0 -#define MX6DL_PAD_ENET_TXD1__I2C4_SDA 0x208 0x5d8 0x884 0x9 0x0 -#define MX6DL_PAD_GPIO_0__CCM_CLKO1 0x20c 0x5dc 0x000 0x0 0x0 -#define MX6DL_PAD_GPIO_0__KEY_COL5 0x20c 0x5dc 0x8c0 0x2 0x1 -#define MX6DL_PAD_GPIO_0__ASRC_EXT_CLK 0x20c 0x5dc 0x794 0x3 0x0 -#define MX6DL_PAD_GPIO_0__EPIT1_OUT 0x20c 0x5dc 0x000 0x4 0x0 -#define MX6DL_PAD_GPIO_0__GPIO1_IO00 0x20c 0x5dc 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_0__USB_H1_PWR 0x20c 0x5dc 0x000 0x6 0x0 -#define MX6DL_PAD_GPIO_0__SNVS_VIO_5 0x20c 0x5dc 0x000 0x7 0x0 -#define MX6DL_PAD_GPIO_1__ESAI_RX_CLK 0x210 0x5e0 0x83c 0x0 0x1 -#define MX6DL_PAD_GPIO_1__WDOG2_B 0x210 0x5e0 0x000 0x1 0x0 -#define MX6DL_PAD_GPIO_1__KEY_ROW5 0x210 0x5e0 0x8cc 0x2 0x1 -#define MX6DL_PAD_GPIO_1__USB_OTG_ID 0x210 0x5e0 0x790 0x3 0x1 -#define MX6DL_PAD_GPIO_1__PWM2_OUT 0x210 0x5e0 0x000 0x4 0x0 -#define MX6DL_PAD_GPIO_1__GPIO1_IO01 0x210 0x5e0 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_1__SD1_CD_B 0x210 0x5e0 0x000 0x6 0x0 -#define MX6DL_PAD_GPIO_16__ESAI_TX3_RX2 0x214 0x5e4 0x850 0x0 0x1 -#define MX6DL_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x214 0x5e4 0x000 0x1 0x0 -#define MX6DL_PAD_GPIO_16__ENET_REF_CLK 0x214 0x5e4 0x80c 0x2 0x0 -#define MX6DL_PAD_GPIO_16__SD1_LCTL 0x214 0x5e4 0x000 0x3 0x0 -#define MX6DL_PAD_GPIO_16__SPDIF_IN 0x214 0x5e4 0x8f0 0x4 0x2 -#define MX6DL_PAD_GPIO_16__GPIO7_IO11 0x214 0x5e4 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_16__I2C3_SDA 0x214 0x5e4 0x87c 0x6 0x1 -#define MX6DL_PAD_GPIO_16__JTAG_DE_B 0x214 0x5e4 0x000 0x7 0x0 -#define MX6DL_PAD_GPIO_17__ESAI_TX0 0x218 0x5e8 0x844 0x0 0x0 -#define MX6DL_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x218 0x5e8 0x000 0x1 0x0 -#define MX6DL_PAD_GPIO_17__CCM_PMIC_READY 0x218 0x5e8 0x7d4 0x2 0x1 -#define MX6DL_PAD_GPIO_17__SDMA_EXT_EVENT0 0x218 0x5e8 0x8e8 0x3 0x1 -#define MX6DL_PAD_GPIO_17__SPDIF_OUT 0x218 0x5e8 0x000 0x4 0x0 -#define MX6DL_PAD_GPIO_17__GPIO7_IO12 0x218 0x5e8 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_18__ESAI_TX1 0x21c 0x5ec 0x848 0x0 0x0 -#define MX6DL_PAD_GPIO_18__ENET_RX_CLK 0x21c 0x5ec 0x814 0x1 0x0 -#define MX6DL_PAD_GPIO_18__SD3_VSELECT 0x21c 0x5ec 0x000 0x2 0x0 -#define MX6DL_PAD_GPIO_18__SDMA_EXT_EVENT1 0x21c 0x5ec 0x8ec 0x3 0x1 -#define MX6DL_PAD_GPIO_18__ASRC_EXT_CLK 0x21c 0x5ec 0x794 0x4 0x1 -#define MX6DL_PAD_GPIO_18__GPIO7_IO13 0x21c 0x5ec 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_18__SNVS_VIO_5_CTL 0x21c 0x5ec 0x000 0x6 0x0 -#define MX6DL_PAD_GPIO_19__KEY_COL5 0x220 0x5f0 0x8c0 0x0 0x2 -#define MX6DL_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x220 0x5f0 0x000 0x1 0x0 -#define MX6DL_PAD_GPIO_19__SPDIF_OUT 0x220 0x5f0 0x000 0x2 0x0 -#define MX6DL_PAD_GPIO_19__CCM_CLKO1 0x220 0x5f0 0x000 0x3 0x0 -#define MX6DL_PAD_GPIO_19__ECSPI1_RDY 0x220 0x5f0 0x000 0x4 0x0 -#define MX6DL_PAD_GPIO_19__GPIO4_IO05 0x220 0x5f0 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_19__ENET_TX_ER 0x220 0x5f0 0x000 0x6 0x0 -#define MX6DL_PAD_GPIO_2__ESAI_TX_FS 0x224 0x5f4 0x830 0x0 0x1 -#define MX6DL_PAD_GPIO_2__KEY_ROW6 0x224 0x5f4 0x8d0 0x2 0x1 -#define MX6DL_PAD_GPIO_2__GPIO1_IO02 0x224 0x5f4 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_2__SD2_WP 0x224 0x5f4 0x000 0x6 0x0 -#define MX6DL_PAD_GPIO_2__MLB_DATA 0x224 0x5f4 0x8e0 0x7 0x1 -#define MX6DL_PAD_GPIO_3__ESAI_RX_HF_CLK 0x228 0x5f8 0x834 0x0 0x1 -#define MX6DL_PAD_GPIO_3__I2C3_SCL 0x228 0x5f8 0x878 0x2 0x1 -#define MX6DL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x228 0x5f8 0x000 0x3 0x0 -#define MX6DL_PAD_GPIO_3__CCM_CLKO2 0x228 0x5f8 0x000 0x4 0x0 -#define MX6DL_PAD_GPIO_3__GPIO1_IO03 0x228 0x5f8 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_3__USB_H1_OC 0x228 0x5f8 0x924 0x6 0x1 -#define MX6DL_PAD_GPIO_3__MLB_CLK 0x228 0x5f8 0x8dc 0x7 0x1 -#define MX6DL_PAD_GPIO_4__ESAI_TX_HF_CLK 0x22c 0x5fc 0x838 0x0 0x1 -#define MX6DL_PAD_GPIO_4__KEY_COL7 0x22c 0x5fc 0x8c8 0x2 0x1 -#define MX6DL_PAD_GPIO_4__GPIO1_IO04 0x22c 0x5fc 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_4__SD2_CD_B 0x22c 0x5fc 0x000 0x6 0x0 -#define MX6DL_PAD_GPIO_5__ESAI_TX2_RX3 0x230 0x600 0x84c 0x0 0x1 -#define MX6DL_PAD_GPIO_5__KEY_ROW7 0x230 0x600 0x8d4 0x2 0x1 -#define MX6DL_PAD_GPIO_5__CCM_CLKO1 0x230 0x600 0x000 0x3 0x0 -#define MX6DL_PAD_GPIO_5__GPIO1_IO05 0x230 0x600 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_5__I2C3_SCL 0x230 0x600 0x878 0x6 0x2 -#define MX6DL_PAD_GPIO_5__ARM_EVENTI 0x230 0x600 0x000 0x7 0x0 -#define MX6DL_PAD_GPIO_6__ESAI_TX_CLK 0x234 0x604 0x840 0x0 0x1 -#define MX6DL_PAD_GPIO_6__I2C3_SDA 0x234 0x604 0x87c 0x2 0x2 -#define MX6DL_PAD_GPIO_6__GPIO1_IO06 0x234 0x604 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_6__SD2_LCTL 0x234 0x604 0x000 0x6 0x0 -#define MX6DL_PAD_GPIO_6__MLB_SIG 0x234 0x604 0x8e4 0x7 0x1 -#define MX6DL_PAD_GPIO_7__ESAI_TX4_RX1 0x238 0x608 0x854 0x0 0x1 -#define MX6DL_PAD_GPIO_7__EPIT1_OUT 0x238 0x608 0x000 0x2 0x0 -#define MX6DL_PAD_GPIO_7__FLEXCAN1_TX 0x238 0x608 0x000 0x3 0x0 -#define MX6DL_PAD_GPIO_7__UART2_TX_DATA 0x238 0x608 0x000 0x4 0x0 -#define MX6DL_PAD_GPIO_7__UART2_RX_DATA 0x238 0x608 0x904 0x4 0x2 -#define MX6DL_PAD_GPIO_7__GPIO1_IO07 0x238 0x608 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_7__SPDIF_LOCK 0x238 0x608 0x000 0x6 0x0 -#define MX6DL_PAD_GPIO_7__USB_OTG_HOST_MODE 0x238 0x608 0x000 0x7 0x0 -#define MX6DL_PAD_GPIO_7__I2C4_SCL 0x238 0x608 0x880 0x8 0x1 -#define MX6DL_PAD_GPIO_8__ESAI_TX5_RX0 0x23c 0x60c 0x858 0x0 0x1 -#define MX6DL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x23c 0x60c 0x000 0x1 0x0 -#define MX6DL_PAD_GPIO_8__EPIT2_OUT 0x23c 0x60c 0x000 0x2 0x0 -#define MX6DL_PAD_GPIO_8__FLEXCAN1_RX 0x23c 0x60c 0x7c8 0x3 0x0 -#define MX6DL_PAD_GPIO_8__UART2_RX_DATA 0x23c 0x60c 0x904 0x4 0x3 -#define MX6DL_PAD_GPIO_8__UART2_TX_DATA 0x23c 0x60c 0x000 0x4 0x0 -#define MX6DL_PAD_GPIO_8__GPIO1_IO08 0x23c 0x60c 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_8__SPDIF_SR_CLK 0x23c 0x60c 0x000 0x6 0x0 -#define MX6DL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x23c 0x60c 0x000 0x7 0x0 -#define MX6DL_PAD_GPIO_8__I2C4_SDA 0x23c 0x60c 0x884 0x8 0x1 -#define MX6DL_PAD_GPIO_9__ESAI_RX_FS 0x240 0x610 0x82c 0x0 0x1 -#define MX6DL_PAD_GPIO_9__WDOG1_B 0x240 0x610 0x000 0x1 0x0 -#define MX6DL_PAD_GPIO_9__KEY_COL6 0x240 0x610 0x8c4 0x2 0x1 -#define MX6DL_PAD_GPIO_9__CCM_REF_EN_B 0x240 0x610 0x000 0x3 0x0 -#define MX6DL_PAD_GPIO_9__PWM1_OUT 0x240 0x610 0x000 0x4 0x0 -#define MX6DL_PAD_GPIO_9__GPIO1_IO09 0x240 0x610 0x000 0x5 0x0 -#define MX6DL_PAD_GPIO_9__SD1_WP 0x240 0x610 0x92c 0x6 0x1 -#define MX6DL_PAD_KEY_COL0__ECSPI1_SCLK 0x244 0x62c 0x7d8 0x0 0x3 -#define MX6DL_PAD_KEY_COL0__ENET_RX_DATA3 0x244 0x62c 0x824 0x1 0x0 -#define MX6DL_PAD_KEY_COL0__AUD5_TXC 0x244 0x62c 0x7c0 0x2 0x1 -#define MX6DL_PAD_KEY_COL0__KEY_COL0 0x244 0x62c 0x000 0x3 0x0 -#define MX6DL_PAD_KEY_COL0__UART4_TX_DATA 0x244 0x62c 0x000 0x4 0x0 -#define MX6DL_PAD_KEY_COL0__UART4_RX_DATA 0x244 0x62c 0x914 0x4 0x2 -#define MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x244 0x62c 0x000 0x5 0x0 -#define MX6DL_PAD_KEY_COL0__DCIC1_OUT 0x244 0x62c 0x000 0x6 0x0 -#define MX6DL_PAD_KEY_COL1__ECSPI1_MISO 0x248 0x630 0x7dc 0x0 0x3 -#define MX6DL_PAD_KEY_COL1__ENET_MDIO 0x248 0x630 0x810 0x1 0x1 -#define MX6DL_PAD_KEY_COL1__AUD5_TXFS 0x248 0x630 0x7c4 0x2 0x1 -#define MX6DL_PAD_KEY_COL1__KEY_COL1 0x248 0x630 0x000 0x3 0x0 -#define MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x248 0x630 0x000 0x4 0x0 -#define MX6DL_PAD_KEY_COL1__UART5_RX_DATA 0x248 0x630 0x91c 0x4 0x2 -#define MX6DL_PAD_KEY_COL1__GPIO4_IO08 0x248 0x630 0x000 0x5 0x0 -#define MX6DL_PAD_KEY_COL1__SD1_VSELECT 0x248 0x630 0x000 0x6 0x0 -#define MX6DL_PAD_KEY_COL2__ECSPI1_SS1 0x24c 0x634 0x7e8 0x0 0x2 -#define MX6DL_PAD_KEY_COL2__ENET_RX_DATA2 0x24c 0x634 0x820 0x1 0x0 -#define MX6DL_PAD_KEY_COL2__FLEXCAN1_TX 0x24c 0x634 0x000 0x2 0x0 -#define MX6DL_PAD_KEY_COL2__KEY_COL2 0x24c 0x634 0x000 0x3 0x0 -#define MX6DL_PAD_KEY_COL2__ENET_MDC 0x24c 0x634 0x000 0x4 0x0 -#define MX6DL_PAD_KEY_COL2__GPIO4_IO10 0x24c 0x634 0x000 0x5 0x0 -#define MX6DL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x24c 0x634 0x000 0x6 0x0 -#define MX6DL_PAD_KEY_COL3__ECSPI1_SS3 0x250 0x638 0x7f0 0x0 0x1 -#define MX6DL_PAD_KEY_COL3__ENET_CRS 0x250 0x638 0x000 0x1 0x0 -#define MX6DL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x250 0x638 0x860 0x2 0x1 -#define MX6DL_PAD_KEY_COL3__KEY_COL3 0x250 0x638 0x000 0x3 0x0 -#define MX6DL_PAD_KEY_COL3__I2C2_SCL 0x250 0x638 0x870 0x4 0x1 -#define MX6DL_PAD_KEY_COL3__GPIO4_IO12 0x250 0x638 0x000 0x5 0x0 -#define MX6DL_PAD_KEY_COL3__SPDIF_IN 0x250 0x638 0x8f0 0x6 0x3 -#define MX6DL_PAD_KEY_COL4__FLEXCAN2_TX 0x254 0x63c 0x000 0x0 0x0 -#define MX6DL_PAD_KEY_COL4__IPU1_SISG4 0x254 0x63c 0x000 0x1 0x0 -#define MX6DL_PAD_KEY_COL4__USB_OTG_OC 0x254 0x63c 0x920 0x2 0x1 -#define MX6DL_PAD_KEY_COL4__KEY_COL4 0x254 0x63c 0x000 0x3 0x0 -#define MX6DL_PAD_KEY_COL4__UART5_RTS_B 0x254 0x63c 0x918 0x4 0x2 -#define MX6DL_PAD_KEY_COL4__UART5_CTS_B 0x254 0x63c 0x000 0x4 0x0 -#define MX6DL_PAD_KEY_COL4__GPIO4_IO14 0x254 0x63c 0x000 0x5 0x0 -#define MX6DL_PAD_KEY_ROW0__ECSPI1_MOSI 0x258 0x640 0x7e0 0x0 0x3 -#define MX6DL_PAD_KEY_ROW0__ENET_TX_DATA3 0x258 0x640 0x000 0x1 0x0 -#define MX6DL_PAD_KEY_ROW0__AUD5_TXD 0x258 0x640 0x7b4 0x2 0x1 -#define MX6DL_PAD_KEY_ROW0__KEY_ROW0 0x258 0x640 0x000 0x3 0x0 -#define MX6DL_PAD_KEY_ROW0__UART4_RX_DATA 0x258 0x640 0x914 0x4 0x3 -#define MX6DL_PAD_KEY_ROW0__UART4_TX_DATA 0x258 0x640 0x000 0x4 0x0 -#define MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x258 0x640 0x000 0x5 0x0 -#define MX6DL_PAD_KEY_ROW0__DCIC2_OUT 0x258 0x640 0x000 0x6 0x0 -#define MX6DL_PAD_KEY_ROW1__ECSPI1_SS0 0x25c 0x644 0x7e4 0x0 0x3 -#define MX6DL_PAD_KEY_ROW1__ENET_COL 0x25c 0x644 0x000 0x1 0x0 -#define MX6DL_PAD_KEY_ROW1__AUD5_RXD 0x25c 0x644 0x7b0 0x2 0x1 -#define MX6DL_PAD_KEY_ROW1__KEY_ROW1 0x25c 0x644 0x000 0x3 0x0 -#define MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x25c 0x644 0x91c 0x4 0x3 -#define MX6DL_PAD_KEY_ROW1__UART5_TX_DATA 0x25c 0x644 0x000 0x4 0x0 -#define MX6DL_PAD_KEY_ROW1__GPIO4_IO09 0x25c 0x644 0x000 0x5 0x0 -#define MX6DL_PAD_KEY_ROW1__SD2_VSELECT 0x25c 0x644 0x000 0x6 0x0 -#define MX6DL_PAD_KEY_ROW2__ECSPI1_SS2 0x260 0x648 0x7ec 0x0 0x1 -#define MX6DL_PAD_KEY_ROW2__ENET_TX_DATA2 0x260 0x648 0x000 0x1 0x0 -#define MX6DL_PAD_KEY_ROW2__FLEXCAN1_RX 0x260 0x648 0x7c8 0x2 0x1 -#define MX6DL_PAD_KEY_ROW2__KEY_ROW2 0x260 0x648 0x000 0x3 0x0 -#define MX6DL_PAD_KEY_ROW2__SD2_VSELECT 0x260 0x648 0x000 0x4 0x0 -#define MX6DL_PAD_KEY_ROW2__GPIO4_IO11 0x260 0x648 0x000 0x5 0x0 -#define MX6DL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x260 0x648 0x85c 0x6 0x1 -#define MX6DL_PAD_KEY_ROW3__ASRC_EXT_CLK 0x264 0x64c 0x794 0x1 0x2 -#define MX6DL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x264 0x64c 0x864 0x2 0x1 -#define MX6DL_PAD_KEY_ROW3__KEY_ROW3 0x264 0x64c 0x000 0x3 0x0 -#define MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x264 0x64c 0x874 0x4 0x1 -#define MX6DL_PAD_KEY_ROW3__GPIO4_IO13 0x264 0x64c 0x000 0x5 0x0 -#define MX6DL_PAD_KEY_ROW3__SD1_VSELECT 0x264 0x64c 0x000 0x6 0x0 -#define MX6DL_PAD_KEY_ROW4__FLEXCAN2_RX 0x268 0x650 0x7cc 0x0 0x0 -#define MX6DL_PAD_KEY_ROW4__IPU1_SISG5 0x268 0x650 0x000 0x1 0x0 -#define MX6DL_PAD_KEY_ROW4__USB_OTG_PWR 0x268 0x650 0x000 0x2 0x0 -#define MX6DL_PAD_KEY_ROW4__KEY_ROW4 0x268 0x650 0x000 0x3 0x0 -#define MX6DL_PAD_KEY_ROW4__UART5_CTS_B 0x268 0x650 0x000 0x4 0x0 -#define MX6DL_PAD_KEY_ROW4__UART5_RTS_B 0x268 0x650 0x918 0x4 0x3 -#define MX6DL_PAD_KEY_ROW4__GPIO4_IO15 0x268 0x650 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_ALE__NAND_ALE 0x26c 0x654 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_ALE__SD4_RESET 0x26c 0x654 0x000 0x1 0x0 -#define MX6DL_PAD_NANDF_ALE__GPIO6_IO08 0x26c 0x654 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_CLE__NAND_CLE 0x270 0x658 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_CLE__GPIO6_IO07 0x270 0x658 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0x274 0x65c 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_CS0__GPIO6_IO11 0x274 0x65c 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0x278 0x660 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_CS1__SD4_VSELECT 0x278 0x660 0x000 0x1 0x0 -#define MX6DL_PAD_NANDF_CS1__SD3_VSELECT 0x278 0x660 0x000 0x2 0x0 -#define MX6DL_PAD_NANDF_CS1__GPIO6_IO14 0x278 0x660 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0x27c 0x664 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_CS2__IPU1_SISG0 0x27c 0x664 0x000 0x1 0x0 -#define MX6DL_PAD_NANDF_CS2__ESAI_TX0 0x27c 0x664 0x844 0x2 0x1 -#define MX6DL_PAD_NANDF_CS2__EIM_CRE 0x27c 0x664 0x000 0x3 0x0 -#define MX6DL_PAD_NANDF_CS2__CCM_CLKO2 0x27c 0x664 0x000 0x4 0x0 -#define MX6DL_PAD_NANDF_CS2__GPIO6_IO15 0x27c 0x664 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0x280 0x668 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_CS3__IPU1_SISG1 0x280 0x668 0x000 0x1 0x0 -#define MX6DL_PAD_NANDF_CS3__ESAI_TX1 0x280 0x668 0x848 0x2 0x1 -#define MX6DL_PAD_NANDF_CS3__EIM_ADDR26 0x280 0x668 0x000 0x3 0x0 -#define MX6DL_PAD_NANDF_CS3__GPIO6_IO16 0x280 0x668 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_CS3__I2C4_SDA 0x280 0x668 0x884 0x9 0x2 -#define MX6DL_PAD_NANDF_D0__NAND_DATA00 0x284 0x66c 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_D0__SD1_DATA4 0x284 0x66c 0x000 0x1 0x0 -#define MX6DL_PAD_NANDF_D0__GPIO2_IO00 0x284 0x66c 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_D1__NAND_DATA01 0x288 0x670 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_D1__SD1_DATA5 0x288 0x670 0x000 0x1 0x0 -#define MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x288 0x670 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_D2__NAND_DATA02 0x28c 0x674 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_D2__SD1_DATA6 0x28c 0x674 0x000 0x1 0x0 -#define MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x28c 0x674 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_D3__NAND_DATA03 0x290 0x678 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_D3__SD1_DATA7 0x290 0x678 0x000 0x1 0x0 -#define MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x290 0x678 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_D4__NAND_DATA04 0x294 0x67c 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_D4__SD2_DATA4 0x294 0x67c 0x000 0x1 0x0 -#define MX6DL_PAD_NANDF_D4__GPIO2_IO04 0x294 0x67c 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_D5__NAND_DATA05 0x298 0x680 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_D5__SD2_DATA5 0x298 0x680 0x000 0x1 0x0 -#define MX6DL_PAD_NANDF_D5__GPIO2_IO05 0x298 0x680 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_D6__NAND_DATA06 0x29c 0x684 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_D6__SD2_DATA6 0x29c 0x684 0x000 0x1 0x0 -#define MX6DL_PAD_NANDF_D6__GPIO2_IO06 0x29c 0x684 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_D7__NAND_DATA07 0x2a0 0x688 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_D7__SD2_DATA7 0x2a0 0x688 0x000 0x1 0x0 -#define MX6DL_PAD_NANDF_D7__GPIO2_IO07 0x2a0 0x688 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_RB0__NAND_READY_B 0x2a4 0x68c 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_RB0__GPIO6_IO10 0x2a4 0x68c 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0x2a8 0x690 0x000 0x0 0x0 -#define MX6DL_PAD_NANDF_WP_B__GPIO6_IO09 0x2a8 0x690 0x000 0x5 0x0 -#define MX6DL_PAD_NANDF_WP_B__I2C4_SCL 0x2a8 0x690 0x880 0x9 0x2 -#define MX6DL_PAD_RGMII_RD0__HSI_RX_READY 0x2ac 0x694 0x000 0x0 0x0 -#define MX6DL_PAD_RGMII_RD0__RGMII_RD0 0x2ac 0x694 0x818 0x1 0x1 -#define MX6DL_PAD_RGMII_RD0__GPIO6_IO25 0x2ac 0x694 0x000 0x5 0x0 -#define MX6DL_PAD_RGMII_RD1__HSI_TX_FLAG 0x2b0 0x698 0x000 0x0 0x0 -#define MX6DL_PAD_RGMII_RD1__RGMII_RD1 0x2b0 0x698 0x81c 0x1 0x1 -#define MX6DL_PAD_RGMII_RD1__GPIO6_IO27 0x2b0 0x698 0x000 0x5 0x0 -#define MX6DL_PAD_RGMII_RD2__HSI_TX_DATA 0x2b4 0x69c 0x000 0x0 0x0 -#define MX6DL_PAD_RGMII_RD2__RGMII_RD2 0x2b4 0x69c 0x820 0x1 0x1 -#define MX6DL_PAD_RGMII_RD2__GPIO6_IO28 0x2b4 0x69c 0x000 0x5 0x0 -#define MX6DL_PAD_RGMII_RD3__HSI_TX_WAKE 0x2b8 0x6a0 0x000 0x0 0x0 -#define MX6DL_PAD_RGMII_RD3__RGMII_RD3 0x2b8 0x6a0 0x824 0x1 0x1 -#define MX6DL_PAD_RGMII_RD3__GPIO6_IO29 0x2b8 0x6a0 0x000 0x5 0x0 -#define MX6DL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x2bc 0x6a4 0x000 0x0 0x0 -#define MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x2bc 0x6a4 0x828 0x1 0x1 -#define MX6DL_PAD_RGMII_RX_CTL__GPIO6_IO24 0x2bc 0x6a4 0x000 0x5 0x0 -#define MX6DL_PAD_RGMII_RXC__USB_H3_STROBE 0x2c0 0x6a8 0x000 0x0 0x0 -#define MX6DL_PAD_RGMII_RXC__RGMII_RXC 0x2c0 0x6a8 0x814 0x1 0x1 -#define MX6DL_PAD_RGMII_RXC__GPIO6_IO30 0x2c0 0x6a8 0x000 0x5 0x0 -#define MX6DL_PAD_RGMII_TD0__HSI_TX_READY 0x2c4 0x6ac 0x000 0x0 0x0 -#define MX6DL_PAD_RGMII_TD0__RGMII_TD0 0x2c4 0x6ac 0x000 0x1 0x0 -#define MX6DL_PAD_RGMII_TD0__GPIO6_IO20 0x2c4 0x6ac 0x000 0x5 0x0 -#define MX6DL_PAD_RGMII_TD1__HSI_RX_FLAG 0x2c8 0x6b0 0x000 0x0 0x0 -#define MX6DL_PAD_RGMII_TD1__RGMII_TD1 0x2c8 0x6b0 0x000 0x1 0x0 -#define MX6DL_PAD_RGMII_TD1__GPIO6_IO21 0x2c8 0x6b0 0x000 0x5 0x0 -#define MX6DL_PAD_RGMII_TD2__HSI_RX_DATA 0x2cc 0x6b4 0x000 0x0 0x0 -#define MX6DL_PAD_RGMII_TD2__RGMII_TD2 0x2cc 0x6b4 0x000 0x1 0x0 -#define MX6DL_PAD_RGMII_TD2__GPIO6_IO22 0x2cc 0x6b4 0x000 0x5 0x0 -#define MX6DL_PAD_RGMII_TD3__HSI_RX_WAKE 0x2d0 0x6b8 0x000 0x0 0x0 -#define MX6DL_PAD_RGMII_TD3__RGMII_TD3 0x2d0 0x6b8 0x000 0x1 0x0 -#define MX6DL_PAD_RGMII_TD3__GPIO6_IO23 0x2d0 0x6b8 0x000 0x5 0x0 -#define MX6DL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x2d4 0x6bc 0x000 0x0 0x0 -#define MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x2d4 0x6bc 0x000 0x1 0x0 -#define MX6DL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x2d4 0x6bc 0x000 0x5 0x0 -#define MX6DL_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x2d4 0x6bc 0x80c 0x7 0x1 -#define MX6DL_PAD_RGMII_TXC__USB_H2_DATA 0x2d8 0x6c0 0x000 0x0 0x0 -#define MX6DL_PAD_RGMII_TXC__RGMII_TXC 0x2d8 0x6c0 0x000 0x1 0x0 -#define MX6DL_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x2d8 0x6c0 0x8f4 0x2 0x1 -#define MX6DL_PAD_RGMII_TXC__GPIO6_IO19 0x2d8 0x6c0 0x000 0x5 0x0 -#define MX6DL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x2d8 0x6c0 0x000 0x7 0x0 -#define MX6DL_PAD_SD1_CLK__SD1_CLK 0x2dc 0x6c4 0x928 0x0 0x1 -#define MX6DL_PAD_SD1_CLK__GPT_CLKIN 0x2dc 0x6c4 0x000 0x3 0x0 -#define MX6DL_PAD_SD1_CLK__GPIO1_IO20 0x2dc 0x6c4 0x000 0x5 0x0 -#define MX6DL_PAD_SD1_CMD__SD1_CMD 0x2e0 0x6c8 0x000 0x0 0x0 -#define MX6DL_PAD_SD1_CMD__PWM4_OUT 0x2e0 0x6c8 0x000 0x2 0x0 -#define MX6DL_PAD_SD1_CMD__GPT_COMPARE1 0x2e0 0x6c8 0x000 0x3 0x0 -#define MX6DL_PAD_SD1_CMD__GPIO1_IO18 0x2e0 0x6c8 0x000 0x5 0x0 -#define MX6DL_PAD_SD1_DAT0__SD1_DATA0 0x2e4 0x6cc 0x000 0x0 0x0 -#define MX6DL_PAD_SD1_DAT0__GPT_CAPTURE1 0x2e4 0x6cc 0x000 0x3 0x0 -#define MX6DL_PAD_SD1_DAT0__GPIO1_IO16 0x2e4 0x6cc 0x000 0x5 0x0 -#define MX6DL_PAD_SD1_DAT1__SD1_DATA1 0x2e8 0x6d0 0x000 0x0 0x0 -#define MX6DL_PAD_SD1_DAT1__PWM3_OUT 0x2e8 0x6d0 0x000 0x2 0x0 -#define MX6DL_PAD_SD1_DAT1__GPT_CAPTURE2 0x2e8 0x6d0 0x000 0x3 0x0 -#define MX6DL_PAD_SD1_DAT1__GPIO1_IO17 0x2e8 0x6d0 0x000 0x5 0x0 -#define MX6DL_PAD_SD1_DAT2__SD1_DATA2 0x2ec 0x6d4 0x000 0x0 0x0 -#define MX6DL_PAD_SD1_DAT2__GPT_COMPARE2 0x2ec 0x6d4 0x000 0x2 0x0 -#define MX6DL_PAD_SD1_DAT2__PWM2_OUT 0x2ec 0x6d4 0x000 0x3 0x0 -#define MX6DL_PAD_SD1_DAT2__WDOG1_B 0x2ec 0x6d4 0x000 0x4 0x0 -#define MX6DL_PAD_SD1_DAT2__GPIO1_IO19 0x2ec 0x6d4 0x000 0x5 0x0 -#define MX6DL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x2ec 0x6d4 0x000 0x6 0x0 -#define MX6DL_PAD_SD1_DAT3__SD1_DATA3 0x2f0 0x6d8 0x000 0x0 0x0 -#define MX6DL_PAD_SD1_DAT3__GPT_COMPARE3 0x2f0 0x6d8 0x000 0x2 0x0 -#define MX6DL_PAD_SD1_DAT3__PWM1_OUT 0x2f0 0x6d8 0x000 0x3 0x0 -#define MX6DL_PAD_SD1_DAT3__WDOG2_B 0x2f0 0x6d8 0x000 0x4 0x0 -#define MX6DL_PAD_SD1_DAT3__GPIO1_IO21 0x2f0 0x6d8 0x000 0x5 0x0 -#define MX6DL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x2f0 0x6d8 0x000 0x6 0x0 -#define MX6DL_PAD_SD2_CLK__SD2_CLK 0x2f4 0x6dc 0x930 0x0 0x1 -#define MX6DL_PAD_SD2_CLK__KEY_COL5 0x2f4 0x6dc 0x8c0 0x2 0x3 -#define MX6DL_PAD_SD2_CLK__AUD4_RXFS 0x2f4 0x6dc 0x7a4 0x3 0x1 -#define MX6DL_PAD_SD2_CLK__GPIO1_IO10 0x2f4 0x6dc 0x000 0x5 0x0 -#define MX6DL_PAD_SD2_CMD__SD2_CMD 0x2f8 0x6e0 0x000 0x0 0x0 -#define MX6DL_PAD_SD2_CMD__KEY_ROW5 0x2f8 0x6e0 0x8cc 0x2 0x2 -#define MX6DL_PAD_SD2_CMD__AUD4_RXC 0x2f8 0x6e0 0x7a0 0x3 0x1 -#define MX6DL_PAD_SD2_CMD__GPIO1_IO11 0x2f8 0x6e0 0x000 0x5 0x0 -#define MX6DL_PAD_SD2_DAT0__SD2_DATA0 0x2fc 0x6e4 0x000 0x0 0x0 -#define MX6DL_PAD_SD2_DAT0__AUD4_RXD 0x2fc 0x6e4 0x798 0x3 0x1 -#define MX6DL_PAD_SD2_DAT0__KEY_ROW7 0x2fc 0x6e4 0x8d4 0x4 0x2 -#define MX6DL_PAD_SD2_DAT0__GPIO1_IO15 0x2fc 0x6e4 0x000 0x5 0x0 -#define MX6DL_PAD_SD2_DAT0__DCIC2_OUT 0x2fc 0x6e4 0x000 0x6 0x0 -#define MX6DL_PAD_SD2_DAT1__SD2_DATA1 0x300 0x6e8 0x000 0x0 0x0 -#define MX6DL_PAD_SD2_DAT1__EIM_CS2_B 0x300 0x6e8 0x000 0x2 0x0 -#define MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x300 0x6e8 0x7ac 0x3 0x1 -#define MX6DL_PAD_SD2_DAT1__KEY_COL7 0x300 0x6e8 0x8c8 0x4 0x2 -#define MX6DL_PAD_SD2_DAT1__GPIO1_IO14 0x300 0x6e8 0x000 0x5 0x0 -#define MX6DL_PAD_SD2_DAT2__SD2_DATA2 0x304 0x6ec 0x000 0x0 0x0 -#define MX6DL_PAD_SD2_DAT2__EIM_CS3_B 0x304 0x6ec 0x000 0x2 0x0 -#define MX6DL_PAD_SD2_DAT2__AUD4_TXD 0x304 0x6ec 0x79c 0x3 0x1 -#define MX6DL_PAD_SD2_DAT2__KEY_ROW6 0x304 0x6ec 0x8d0 0x4 0x2 -#define MX6DL_PAD_SD2_DAT2__GPIO1_IO13 0x304 0x6ec 0x000 0x5 0x0 -#define MX6DL_PAD_SD2_DAT3__SD2_DATA3 0x308 0x6f0 0x000 0x0 0x0 -#define MX6DL_PAD_SD2_DAT3__KEY_COL6 0x308 0x6f0 0x8c4 0x2 0x2 -#define MX6DL_PAD_SD2_DAT3__AUD4_TXC 0x308 0x6f0 0x7a8 0x3 0x1 -#define MX6DL_PAD_SD2_DAT3__GPIO1_IO12 0x308 0x6f0 0x000 0x5 0x0 -#define MX6DL_PAD_SD3_CLK__SD3_CLK 0x30c 0x6f4 0x934 0x0 0x1 -#define MX6DL_PAD_SD3_CLK__UART2_RTS_B 0x30c 0x6f4 0x900 0x1 0x2 -#define MX6DL_PAD_SD3_CLK__UART2_CTS_B 0x30c 0x6f4 0x000 0x1 0x0 -#define MX6DL_PAD_SD3_CLK__FLEXCAN1_RX 0x30c 0x6f4 0x7c8 0x2 0x2 -#define MX6DL_PAD_SD3_CLK__GPIO7_IO03 0x30c 0x6f4 0x000 0x5 0x0 -#define MX6DL_PAD_SD3_CMD__SD3_CMD 0x310 0x6f8 0x000 0x0 0x0 -#define MX6DL_PAD_SD3_CMD__UART2_CTS_B 0x310 0x6f8 0x000 0x1 0x0 -#define MX6DL_PAD_SD3_CMD__UART2_RTS_B 0x310 0x6f8 0x900 0x1 0x3 -#define MX6DL_PAD_SD3_CMD__FLEXCAN1_TX 0x310 0x6f8 0x000 0x2 0x0 -#define MX6DL_PAD_SD3_CMD__GPIO7_IO02 0x310 0x6f8 0x000 0x5 0x0 -#define MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x314 0x6fc 0x000 0x0 0x0 -#define MX6DL_PAD_SD3_DAT0__UART1_CTS_B 0x314 0x6fc 0x000 0x1 0x0 -#define MX6DL_PAD_SD3_DAT0__UART1_RTS_B 0x314 0x6fc 0x8f8 0x1 0x2 -#define MX6DL_PAD_SD3_DAT0__FLEXCAN2_TX 0x314 0x6fc 0x000 0x2 0x0 -#define MX6DL_PAD_SD3_DAT0__GPIO7_IO04 0x314 0x6fc 0x000 0x5 0x0 -#define MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x318 0x700 0x000 0x0 0x0 -#define MX6DL_PAD_SD3_DAT1__UART1_RTS_B 0x318 0x700 0x8f8 0x1 0x3 -#define MX6DL_PAD_SD3_DAT1__UART1_CTS_B 0x318 0x700 0x000 0x1 0x0 -#define MX6DL_PAD_SD3_DAT1__FLEXCAN2_RX 0x318 0x700 0x7cc 0x2 0x1 -#define MX6DL_PAD_SD3_DAT1__GPIO7_IO05 0x318 0x700 0x000 0x5 0x0 -#define MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x31c 0x704 0x000 0x0 0x0 -#define MX6DL_PAD_SD3_DAT2__GPIO7_IO06 0x31c 0x704 0x000 0x5 0x0 -#define MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x320 0x708 0x000 0x0 0x0 -#define MX6DL_PAD_SD3_DAT3__UART3_CTS_B 0x320 0x708 0x000 0x1 0x0 -#define MX6DL_PAD_SD3_DAT3__UART3_RTS_B 0x320 0x708 0x908 0x1 0x4 -#define MX6DL_PAD_SD3_DAT3__GPIO7_IO07 0x320 0x708 0x000 0x5 0x0 -#define MX6DL_PAD_SD3_DAT4__SD3_DATA4 0x324 0x70c 0x000 0x0 0x0 -#define MX6DL_PAD_SD3_DAT4__UART2_RX_DATA 0x324 0x70c 0x904 0x1 0x4 -#define MX6DL_PAD_SD3_DAT4__UART2_TX_DATA 0x324 0x70c 0x000 0x1 0x0 -#define MX6DL_PAD_SD3_DAT4__GPIO7_IO01 0x324 0x70c 0x000 0x5 0x0 -#define MX6DL_PAD_SD3_DAT5__SD3_DATA5 0x328 0x710 0x000 0x0 0x0 -#define MX6DL_PAD_SD3_DAT5__UART2_TX_DATA 0x328 0x710 0x000 0x1 0x0 -#define MX6DL_PAD_SD3_DAT5__UART2_RX_DATA 0x328 0x710 0x904 0x1 0x5 -#define MX6DL_PAD_SD3_DAT5__GPIO7_IO00 0x328 0x710 0x000 0x5 0x0 -#define MX6DL_PAD_SD3_DAT6__SD3_DATA6 0x32c 0x714 0x000 0x0 0x0 -#define MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x32c 0x714 0x8fc 0x1 0x2 -#define MX6DL_PAD_SD3_DAT6__UART1_TX_DATA 0x32c 0x714 0x000 0x1 0x0 -#define MX6DL_PAD_SD3_DAT6__GPIO6_IO18 0x32c 0x714 0x000 0x5 0x0 -#define MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x330 0x718 0x000 0x0 0x0 -#define MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x330 0x718 0x000 0x1 0x0 -#define MX6DL_PAD_SD3_DAT7__UART1_RX_DATA 0x330 0x718 0x8fc 0x1 0x3 -#define MX6DL_PAD_SD3_DAT7__GPIO6_IO17 0x330 0x718 0x000 0x5 0x0 -#define MX6DL_PAD_SD3_RST__SD3_RESET 0x334 0x71c 0x000 0x0 0x0 -#define MX6DL_PAD_SD3_RST__UART3_RTS_B 0x334 0x71c 0x908 0x1 0x5 -#define MX6DL_PAD_SD3_RST__UART3_CTS_B 0x334 0x71c 0x000 0x1 0x0 -#define MX6DL_PAD_SD3_RST__GPIO7_IO08 0x334 0x71c 0x000 0x5 0x0 -#define MX6DL_PAD_SD4_CLK__SD4_CLK 0x338 0x720 0x938 0x0 0x1 -#define MX6DL_PAD_SD4_CLK__NAND_WE_B 0x338 0x720 0x000 0x1 0x0 -#define MX6DL_PAD_SD4_CLK__UART3_RX_DATA 0x338 0x720 0x90c 0x2 0x2 -#define MX6DL_PAD_SD4_CLK__UART3_TX_DATA 0x338 0x720 0x000 0x2 0x0 -#define MX6DL_PAD_SD4_CLK__GPIO7_IO10 0x338 0x720 0x000 0x5 0x0 -#define MX6DL_PAD_SD4_CMD__SD4_CMD 0x33c 0x724 0x000 0x0 0x0 -#define MX6DL_PAD_SD4_CMD__NAND_RE_B 0x33c 0x724 0x000 0x1 0x0 -#define MX6DL_PAD_SD4_CMD__UART3_TX_DATA 0x33c 0x724 0x000 0x2 0x0 -#define MX6DL_PAD_SD4_CMD__UART3_RX_DATA 0x33c 0x724 0x90c 0x2 0x3 -#define MX6DL_PAD_SD4_CMD__GPIO7_IO09 0x33c 0x724 0x000 0x5 0x0 -#define MX6DL_PAD_SD4_DAT0__SD4_DATA0 0x340 0x728 0x000 0x1 0x0 -#define MX6DL_PAD_SD4_DAT0__NAND_DQS 0x340 0x728 0x000 0x2 0x0 -#define MX6DL_PAD_SD4_DAT0__GPIO2_IO08 0x340 0x728 0x000 0x5 0x0 -#define MX6DL_PAD_SD4_DAT1__SD4_DATA1 0x344 0x72c 0x000 0x1 0x0 -#define MX6DL_PAD_SD4_DAT1__PWM3_OUT 0x344 0x72c 0x000 0x2 0x0 -#define MX6DL_PAD_SD4_DAT1__GPIO2_IO09 0x344 0x72c 0x000 0x5 0x0 -#define MX6DL_PAD_SD4_DAT2__SD4_DATA2 0x348 0x730 0x000 0x1 0x0 -#define MX6DL_PAD_SD4_DAT2__PWM4_OUT 0x348 0x730 0x000 0x2 0x0 -#define MX6DL_PAD_SD4_DAT2__GPIO2_IO10 0x348 0x730 0x000 0x5 0x0 -#define MX6DL_PAD_SD4_DAT3__SD4_DATA3 0x34c 0x734 0x000 0x1 0x0 -#define MX6DL_PAD_SD4_DAT3__GPIO2_IO11 0x34c 0x734 0x000 0x5 0x0 -#define MX6DL_PAD_SD4_DAT4__SD4_DATA4 0x350 0x738 0x000 0x1 0x0 -#define MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x350 0x738 0x904 0x2 0x6 -#define MX6DL_PAD_SD4_DAT4__UART2_TX_DATA 0x350 0x738 0x000 0x2 0x0 -#define MX6DL_PAD_SD4_DAT4__GPIO2_IO12 0x350 0x738 0x000 0x5 0x0 -#define MX6DL_PAD_SD4_DAT5__SD4_DATA5 0x354 0x73c 0x000 0x1 0x0 -#define MX6DL_PAD_SD4_DAT5__UART2_RTS_B 0x354 0x73c 0x900 0x2 0x4 -#define MX6DL_PAD_SD4_DAT5__UART2_CTS_B 0x354 0x73c 0x000 0x2 0x0 -#define MX6DL_PAD_SD4_DAT5__GPIO2_IO13 0x354 0x73c 0x000 0x5 0x0 -#define MX6DL_PAD_SD4_DAT6__SD4_DATA6 0x358 0x740 0x000 0x1 0x0 -#define MX6DL_PAD_SD4_DAT6__UART2_CTS_B 0x358 0x740 0x000 0x2 0x0 -#define MX6DL_PAD_SD4_DAT6__UART2_RTS_B 0x358 0x740 0x900 0x2 0x5 -#define MX6DL_PAD_SD4_DAT6__GPIO2_IO14 0x358 0x740 0x000 0x5 0x0 -#define MX6DL_PAD_SD4_DAT7__SD4_DATA7 0x35c 0x744 0x000 0x1 0x0 -#define MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x35c 0x744 0x000 0x2 0x0 -#define MX6DL_PAD_SD4_DAT7__UART2_RX_DATA 0x35c 0x744 0x904 0x2 0x7 -#define MX6DL_PAD_SD4_DAT7__GPIO2_IO15 0x35c 0x744 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x04c 0x360 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC 0x04c 0x360 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x04c 0x360 0x7f8 0x2 0x0 +#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x04c 0x360 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x04c 0x360 0x8fc 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x04c 0x360 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x04c 0x360 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x050 0x364 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS 0x050 0x364 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0 0x050 0x364 0x800 0x2 0x0 +#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x050 0x364 0x8fc 0x3 0x1 +#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x050 0x364 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x050 0x364 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x050 0x364 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x054 0x368 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x054 0x368 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x054 0x368 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA 0x054 0x368 0x914 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x054 0x368 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x054 0x368 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x058 0x36c 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x058 0x36c 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x058 0x36c 0x914 0x3 0x1 +#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA 0x058 0x36c 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x058 0x36c 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x058 0x36c 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x05c 0x370 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x05c 0x370 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x05c 0x370 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA 0x05c 0x370 0x91c 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x05c 0x370 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x05c 0x370 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x060 0x374 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x060 0x374 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x060 0x374 0x91c 0x3 0x1 +#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA 0x060 0x374 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x060 0x374 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x060 0x374 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x064 0x378 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x064 0x378 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x064 0x378 0x910 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B 0x064 0x378 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x064 0x378 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x064 0x378 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x068 0x37c 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x068 0x37c 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x068 0x37c 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B 0x068 0x37c 0x910 0x3 0x1 +#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x068 0x37c 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x068 0x37c 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x06c 0x380 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x06c 0x380 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x06c 0x380 0x918 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B 0x06c 0x380 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x06c 0x380 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x06c 0x380 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x070 0x384 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x070 0x384 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x070 0x384 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B 0x070 0x384 0x918 0x3 0x1 +#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x070 0x384 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x074 0x388 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x074 0x388 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x074 0x388 0x7d8 0x2 0x0 +#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5 0x074 0x388 0x8c0 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x074 0x388 0x000 0x4 0x0 +#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x074 0x388 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x074 0x388 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x078 0x38c 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x078 0x38c 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x078 0x38c 0x7e0 0x2 0x0 +#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5 0x078 0x38c 0x8cc 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x078 0x38c 0x000 0x4 0x0 +#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x078 0x38c 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x078 0x38c 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x07c 0x390 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x07c 0x390 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x07c 0x390 0x7dc 0x2 0x0 +#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6 0x07c 0x390 0x8c4 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x07c 0x390 0x000 0x4 0x0 +#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24 0x07c 0x390 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x07c 0x390 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x080 0x394 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x080 0x394 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0 0x080 0x394 0x7e4 0x2 0x0 +#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6 0x080 0x394 0x8d0 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x080 0x394 0x000 0x4 0x0 +#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x080 0x394 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x080 0x394 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x084 0x398 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x084 0x398 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x084 0x398 0x7f4 0x2 0x0 +#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7 0x084 0x398 0x8c8 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x084 0x398 0x86c 0x4 0x0 +#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x084 0x398 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x084 0x398 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x088 0x39c 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x088 0x39c 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x088 0x39c 0x7fc 0x2 0x0 +#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7 0x088 0x39c 0x8d4 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x088 0x39c 0x868 0x4 0x0 +#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x088 0x39c 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x088 0x39c 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x08c 0x3a0 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x08c 0x3a0 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x08c 0x3a0 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x08c 0x3a0 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x090 0x3a4 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x090 0x3a4 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x090 0x3a4 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x090 0x3a4 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x094 0x3a8 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x094 0x3a8 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x094 0x3a8 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x098 0x3ac 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x098 0x3ac 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x098 0x3ac 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x098 0x3ac 0x000 0x7 0x0 +#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x09c 0x3b0 0x000 0x0 0x0 +#define MX6QDL_PAD_DI0_DISP_CLK__LCD_CLK 0x09c 0x3b0 0x000 0x1 0x0 +#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x09c 0x3b0 0x000 0x5 0x0 +#define MX6QDL_PAD_DI0_DISP_CLK__LCD_WR_RWN 0x09c 0x3b0 0x000 0x8 0x0 +#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x0a0 0x3b4 0x000 0x0 0x0 +#define MX6QDL_PAD_DI0_PIN15__LCD_ENABLE 0x0a0 0x3b4 0x000 0x1 0x0 +#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x0a0 0x3b4 0x000 0x2 0x0 +#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x0a0 0x3b4 0x000 0x5 0x0 +#define MX6QDL_PAD_DI0_PIN15__LCD_RD_E 0x0a0 0x3b4 0x000 0x8 0x0 +#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x0a4 0x3b8 0x000 0x0 0x0 +#define MX6QDL_PAD_DI0_PIN2__LCD_HSYNC 0x0a4 0x3b8 0x8d8 0x1 0x0 +#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x0a4 0x3b8 0x000 0x2 0x0 +#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x0a4 0x3b8 0x000 0x5 0x0 +#define MX6QDL_PAD_DI0_PIN2__LCD_RS 0x0a4 0x3b8 0x000 0x8 0x0 +#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x0a8 0x3bc 0x000 0x0 0x0 +#define MX6QDL_PAD_DI0_PIN3__LCD_VSYNC 0x0a8 0x3bc 0x000 0x1 0x0 +#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x0a8 0x3bc 0x000 0x2 0x0 +#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x0a8 0x3bc 0x000 0x5 0x0 +#define MX6QDL_PAD_DI0_PIN3__LCD_CS 0x0a8 0x3bc 0x000 0x8 0x0 +#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x0ac 0x3c0 0x000 0x0 0x0 +#define MX6QDL_PAD_DI0_PIN4__LCD_BUSY 0x0ac 0x3c0 0x8d8 0x1 0x1 +#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x0ac 0x3c0 0x000 0x2 0x0 +#define MX6QDL_PAD_DI0_PIN4__SD1_WP 0x0ac 0x3c0 0x92c 0x3 0x0 +#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0ac 0x3c0 0x000 0x5 0x0 +#define MX6QDL_PAD_DI0_PIN4__LCD_RESET 0x0ac 0x3c0 0x000 0x8 0x0 +#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x0b0 0x3c4 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT0__LCD_DATA00 0x0b0 0x3c4 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x0b0 0x3c4 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x0b0 0x3c4 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x0b4 0x3c8 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT1__LCD_DATA01 0x0b4 0x3c8 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x0b4 0x3c8 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x0b4 0x3c8 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x0b8 0x3cc 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT10__LCD_DATA10 0x0b8 0x3cc 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x0b8 0x3cc 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x0bc 0x3d0 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT11__LCD_DATA11 0x0bc 0x3d0 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0bc 0x3d0 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x0c0 0x3d4 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT12__LCD_DATA12 0x0c0 0x3d4 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x0c0 0x3d4 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x0c4 0x3d8 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT13__LCD_DATA13 0x0c4 0x3d8 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS 0x0c4 0x3d8 0x7bc 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x0c4 0x3d8 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x0c8 0x3dc 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT14__LCD_DATA14 0x0c8 0x3dc 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC 0x0c8 0x3dc 0x7b8 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x0c8 0x3dc 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x0cc 0x3e0 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT15__LCD_DATA15 0x0cc 0x3e0 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1 0x0cc 0x3e0 0x7e8 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1 0x0cc 0x3e0 0x804 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x0cc 0x3e0 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x0d0 0x3e4 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT16__LCD_DATA16 0x0d0 0x3e4 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x0d0 0x3e4 0x7fc 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x0d0 0x3e4 0x7c0 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x0d0 0x3e4 0x8e8 0x4 0x0 +#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x0d0 0x3e4 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x0d4 0x3e8 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT17__LCD_DATA17 0x0d4 0x3e8 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x0d4 0x3e8 0x7f8 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x0d4 0x3e8 0x7b4 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x0d4 0x3e8 0x8ec 0x4 0x0 +#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0d4 0x3e8 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x0d8 0x3ec 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT18__LCD_DATA18 0x0d8 0x3ec 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0 0x0d8 0x3ec 0x800 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x0d8 0x3ec 0x7c4 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS 0x0d8 0x3ec 0x7a4 0x4 0x0 +#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x0d8 0x3ec 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B 0x0d8 0x3ec 0x000 0x7 0x0 +#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x0dc 0x3f0 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT19__LCD_DATA19 0x0dc 0x3f0 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x0dc 0x3f0 0x7f4 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x0dc 0x3f0 0x7b0 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC 0x0dc 0x3f0 0x7a0 0x4 0x0 +#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x0dc 0x3f0 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B 0x0dc 0x3f0 0x000 0x7 0x0 +#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x0e0 0x3f4 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT2__LCD_DATA02 0x0e0 0x3f4 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x0e0 0x3f4 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x0e0 0x3f4 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x0e4 0x3f8 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT20__LCD_DATA20 0x0e4 0x3f8 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK 0x0e4 0x3f8 0x7d8 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x0e4 0x3f8 0x7a8 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x0e4 0x3f8 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x0e8 0x3fc 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT21__LCD_DATA21 0x0e8 0x3fc 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI 0x0e8 0x3fc 0x7e0 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x0e8 0x3fc 0x79c 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x0e8 0x3fc 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x0ec 0x400 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT22__LCD_DATA22 0x0ec 0x400 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO 0x0ec 0x400 0x7dc 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x0ec 0x400 0x7ac 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x0ec 0x400 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x0f0 0x404 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT23__LCD_DATA23 0x0f0 0x404 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0 0x0f0 0x404 0x7e4 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x0f0 0x404 0x798 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x0f0 0x404 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x0f4 0x408 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT3__LCD_DATA03 0x0f4 0x408 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0 0x0f4 0x408 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x0f4 0x408 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x0f8 0x40c 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT4__LCD_DATA04 0x0f8 0x40c 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1 0x0f8 0x40c 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x0f8 0x40c 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x0fc 0x410 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT5__LCD_DATA05 0x0fc 0x410 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2 0x0fc 0x410 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS 0x0fc 0x410 0x000 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x0fc 0x410 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100 0x414 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT6__LCD_DATA06 0x100 0x414 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3 0x100 0x414 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC 0x100 0x414 0x000 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x100 0x414 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x104 0x418 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT7__LCD_DATA07 0x104 0x418 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY 0x104 0x418 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x104 0x418 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x108 0x41c 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT8__LCD_DATA08 0x108 0x41c 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x108 0x41c 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x108 0x41c 0x000 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x108 0x41c 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10c 0x420 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT9__LCD_DATA09 0x10c 0x420 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x10c 0x420 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B 0x10c 0x420 0x000 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x10c 0x420 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A16__EIM_ADDR16 0x110 0x4e0 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x110 0x4e0 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x110 0x4e0 0x8b8 0x2 0x0 +#define MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x110 0x4e0 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16 0x110 0x4e0 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A16__EPDC_DATA00 0x110 0x4e0 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_A17__EIM_ADDR17 0x114 0x4e4 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x114 0x4e4 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x114 0x4e4 0x890 0x2 0x0 +#define MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x114 0x4e4 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17 0x114 0x4e4 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A17__EPDC_PWR_STAT 0x114 0x4e4 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_A18__EIM_ADDR18 0x118 0x4e8 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x118 0x4e8 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13 0x118 0x4e8 0x894 0x2 0x0 +#define MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x118 0x4e8 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18 0x118 0x4e8 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A18__EPDC_PWR_CTRL0 0x118 0x4e8 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_A19__EIM_ADDR19 0x11c 0x4ec 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x11c 0x4ec 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14 0x11c 0x4ec 0x898 0x2 0x0 +#define MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x11c 0x4ec 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19 0x11c 0x4ec 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A19__EPDC_PWR_CTRL1 0x11c 0x4ec 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_A20__EIM_ADDR20 0x120 0x4f0 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x120 0x4f0 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15 0x120 0x4f0 0x89c 0x2 0x0 +#define MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x120 0x4f0 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20 0x120 0x4f0 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A20__EPDC_PWR_CTRL2 0x120 0x4f0 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_A21__EIM_ADDR21 0x124 0x4f4 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x124 0x4f4 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16 0x124 0x4f4 0x8a0 0x2 0x0 +#define MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x124 0x4f4 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21 0x124 0x4f4 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A21__EPDC_GDCLK 0x124 0x4f4 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_A22__EIM_ADDR22 0x128 0x4f8 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x128 0x4f8 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17 0x128 0x4f8 0x8a4 0x2 0x0 +#define MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x128 0x4f8 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22 0x128 0x4f8 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A22__EPDC_GDSP 0x128 0x4f8 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_A23__EIM_ADDR23 0x12c 0x4fc 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x12c 0x4fc 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18 0x12c 0x4fc 0x8a8 0x2 0x0 +#define MX6QDL_PAD_EIM_A23__IPU1_SISG3 0x12c 0x4fc 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x12c 0x4fc 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23 0x12c 0x4fc 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A23__EPDC_GDOE 0x12c 0x4fc 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_A24__EIM_ADDR24 0x130 0x500 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x130 0x500 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19 0x130 0x500 0x8ac 0x2 0x0 +#define MX6QDL_PAD_EIM_A24__IPU1_SISG2 0x130 0x500 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x130 0x500 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24 0x130 0x500 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A24__EPDC_GDRL 0x130 0x500 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_A25__EIM_ADDR25 0x134 0x504 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1 0x134 0x504 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY 0x134 0x504 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12 0x134 0x504 0x000 0x3 0x0 +#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS 0x134 0x504 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x134 0x504 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x134 0x504 0x85c 0x6 0x0 +#define MX6QDL_PAD_EIM_A25__EPDC_DATA15 0x134 0x504 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_A25__EIM_ACLK_FREERUN 0x134 0x504 0x000 0x9 0x0 +#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0x138 0x508 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x138 0x508 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x138 0x508 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_BCLK__EPDC_SDCE9 0x138 0x508 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0x13c 0x50c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05 0x13c 0x50c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x13c 0x50c 0x7f4 0x2 0x2 +#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x13c 0x50c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_CS0__EPDC_DATA06 0x13c 0x50c 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0x140 0x510 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06 0x140 0x510 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x140 0x510 0x7fc 0x2 0x2 +#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x140 0x510 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_CS1__EPDC_DATA08 0x140 0x510 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D16__EIM_DATA16 0x144 0x514 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x144 0x514 0x7d8 0x1 0x2 +#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05 0x144 0x514 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x144 0x514 0x8a8 0x3 0x1 +#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x144 0x514 0x864 0x4 0x0 +#define MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x144 0x514 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D16__I2C2_SDA 0x144 0x514 0x874 0x6 0x0 +#define MX6QDL_PAD_EIM_D16__EPDC_DATA10 0x144 0x514 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D17__EIM_DATA17 0x148 0x518 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x148 0x518 0x7dc 0x1 0x2 +#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06 0x148 0x518 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0x148 0x518 0x8b8 0x3 0x1 +#define MX6QDL_PAD_EIM_D17__DCIC1_OUT 0x148 0x518 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x148 0x518 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D17__I2C3_SCL 0x148 0x518 0x878 0x6 0x0 +#define MX6QDL_PAD_EIM_D17__EPDC_VCOM0 0x148 0x518 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D18__EIM_DATA18 0x14c 0x51c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x14c 0x51c 0x7e0 0x1 0x2 +#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07 0x14c 0x51c 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x14c 0x51c 0x8a4 0x3 0x1 +#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS 0x14c 0x51c 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x14c 0x51c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D18__I2C3_SDA 0x14c 0x51c 0x87c 0x6 0x0 +#define MX6QDL_PAD_EIM_D18__EPDC_VCOM1 0x14c 0x51c 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D19__EIM_DATA19 0x150 0x520 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1 0x150 0x520 0x7e8 0x1 0x1 +#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08 0x150 0x520 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x150 0x520 0x8a0 0x3 0x1 +#define MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x150 0x520 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x150 0x520 0x8f8 0x4 0x0 +#define MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x150 0x520 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D19__EPIT1_OUT 0x150 0x520 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D19__EPDC_DATA12 0x150 0x520 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D20__EIM_DATA20 0x154 0x524 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0 0x154 0x524 0x808 0x1 0x0 +#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16 0x154 0x524 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x154 0x524 0x89c 0x3 0x1 +#define MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x154 0x524 0x8f8 0x4 0x1 +#define MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x154 0x524 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x154 0x524 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D20__EPIT2_OUT 0x154 0x524 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D21__EIM_DATA21 0x158 0x528 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x158 0x528 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17 0x158 0x528 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D21__IPU1_CSI1_DATA11 0x158 0x528 0x88c 0x3 0x0 +#define MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x158 0x528 0x920 0x4 0x0 +#define MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x158 0x528 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D21__I2C1_SCL 0x158 0x528 0x868 0x6 0x1 +#define MX6QDL_PAD_EIM_D21__SPDIF_IN 0x158 0x528 0x8f0 0x7 0x0 +#define MX6QDL_PAD_EIM_D22__EIM_DATA22 0x15c 0x52c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x15c 0x52c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01 0x15c 0x52c 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D22__IPU1_CSI1_DATA10 0x15c 0x52c 0x888 0x3 0x0 +#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x15c 0x52c 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x15c 0x52c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D22__SPDIF_OUT 0x15c 0x52c 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D22__EPDC_SDCE6 0x15c 0x52c 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D23__EIM_DATA23 0x160 0x530 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS 0x160 0x530 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x160 0x530 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x160 0x530 0x908 0x2 0x0 +#define MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x160 0x530 0x000 0x3 0x0 +#define MX6QDL_PAD_EIM_D23__IPU1_CSI1_DATA_EN 0x160 0x530 0x8b0 0x4 0x0 +#define MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x160 0x530 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02 0x160 0x530 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14 0x160 0x530 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D23__EPDC_DATA11 0x160 0x530 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D24__EIM_DATA24 0x164 0x534 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2 0x164 0x534 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x164 0x534 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x164 0x534 0x90c 0x2 0x0 +#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2 0x164 0x534 0x7ec 0x3 0x0 +#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2 0x164 0x534 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x164 0x534 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x164 0x534 0x7bc 0x6 0x1 +#define MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x164 0x534 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D24__EPDC_SDCE7 0x164 0x534 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D25__EIM_DATA25 0x168 0x538 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3 0x168 0x538 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x168 0x538 0x90c 0x2 0x1 +#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x168 0x538 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3 0x168 0x538 0x7f0 0x3 0x0 +#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3 0x168 0x538 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x168 0x538 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D25__AUD5_RXC 0x168 0x538 0x7b8 0x6 0x1 +#define MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x168 0x538 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D25__EPDC_SDCE8 0x168 0x538 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D26__EIM_DATA26 0x16c 0x53c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11 0x16c 0x53c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01 0x16c 0x53c 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x16c 0x53c 0x898 0x3 0x1 +#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x16c 0x53c 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x16c 0x53c 0x904 0x4 0x0 +#define MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x16c 0x53c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D26__IPU1_SISG2 0x16c 0x53c 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x16c 0x53c 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D26__EPDC_SDOED 0x16c 0x53c 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D27__EIM_DATA27 0x170 0x540 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13 0x170 0x540 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00 0x170 0x540 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x170 0x540 0x894 0x3 0x1 +#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x170 0x540 0x904 0x4 0x1 +#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x170 0x540 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x170 0x540 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D27__IPU1_SISG3 0x170 0x540 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x170 0x540 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D27__EPDC_SDOE 0x170 0x540 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D28__EIM_DATA28 0x174 0x544 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D28__I2C1_SDA 0x174 0x544 0x86c 0x1 0x1 +#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x174 0x544 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D28__IPU1_CSI1_DATA12 0x174 0x544 0x890 0x3 0x1 +#define MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x174 0x544 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x174 0x544 0x900 0x4 0x0 +#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x174 0x544 0x900 0x4 0x0 +#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B 0x174 0x544 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x174 0x544 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG 0x174 0x544 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13 0x174 0x544 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D28__EPDC_PWR_CTRL3 0x174 0x544 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D29__EIM_DATA29 0x178 0x548 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15 0x178 0x548 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0 0x178 0x548 0x808 0x2 0x1 +#define MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x178 0x548 0x900 0x4 0x1 +#define MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x178 0x548 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x178 0x548 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x178 0x548 0x900 0x4 0x1 +#define MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x178 0x548 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x178 0x548 0x8bc 0x6 0x0 +#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14 0x178 0x548 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D29__EPDC_PWR_WAKE 0x178 0x548 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D30__EIM_DATA30 0x17c 0x54c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x17c 0x54c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11 0x17c 0x54c 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03 0x17c 0x54c 0x000 0x3 0x0 +#define MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x17c 0x54c 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x17c 0x54c 0x908 0x4 0x1 +#define MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x17c 0x54c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D30__USB_H1_OC 0x17c 0x54c 0x924 0x6 0x0 +#define MX6QDL_PAD_EIM_D30__EPDC_SDOEZ 0x17c 0x54c 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D31__EIM_DATA31 0x180 0x550 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x180 0x550 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12 0x180 0x550 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02 0x180 0x550 0x000 0x3 0x0 +#define MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x180 0x550 0x908 0x4 0x2 +#define MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x180 0x550 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x180 0x550 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D31__USB_H1_PWR 0x180 0x550 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D31__EPDC_SDCLK_P 0x180 0x550 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_D31__EIM_ACLK_FREERUN 0x180 0x550 0x000 0x9 0x0 +#define MX6QDL_PAD_EIM_DA0__EIM_AD00 0x184 0x554 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x184 0x554 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA0__IPU1_CSI1_DATA09 0x184 0x554 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x184 0x554 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00 0x184 0x554 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA0__EPDC_SDCLK_N 0x184 0x554 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA1__EIM_AD01 0x188 0x558 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x188 0x558 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA1__IPU1_CSI1_DATA08 0x188 0x558 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x188 0x558 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01 0x188 0x558 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA1__EPDC_SDLE 0x188 0x558 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA10__EIM_AD10 0x18c 0x55c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x18c 0x55c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN 0x18c 0x55c 0x8b0 0x2 0x1 +#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x18c 0x55c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10 0x18c 0x55c 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA10__EPDC_DATA01 0x18c 0x55c 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA11__EIM_AD11 0x190 0x560 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x190 0x560 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA11__IPU1_CSI1_HSYNC 0x190 0x560 0x8b4 0x2 0x0 +#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x190 0x560 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11 0x190 0x560 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA11__EPDC_DATA03 0x190 0x560 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA12__EIM_AD12 0x194 0x564 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x194 0x564 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA12__IPU1_CSI1_VSYNC 0x194 0x564 0x8bc 0x2 0x1 +#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x194 0x564 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12 0x194 0x564 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA12__EPDC_DATA02 0x194 0x564 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA13__EIM_AD13 0x198 0x568 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x198 0x568 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x198 0x568 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13 0x198 0x568 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA13__EPDC_DATA13 0x198 0x568 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA14__EIM_AD14 0x19c 0x56c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x19c 0x56c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x19c 0x56c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14 0x19c 0x56c 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA14__EPDC_DATA14 0x19c 0x56c 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA15__EIM_AD15 0x1a0 0x570 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01 0x1a0 0x570 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04 0x1a0 0x570 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1a0 0x570 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15 0x1a0 0x570 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA15__EPDC_DATA09 0x1a0 0x570 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA2__EIM_AD02 0x1a4 0x574 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x1a4 0x574 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA2__IPU1_CSI1_DATA07 0x1a4 0x574 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1a4 0x574 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02 0x1a4 0x574 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA2__EPDC_BDR0 0x1a4 0x574 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA3__EIM_AD03 0x1a8 0x578 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x1a8 0x578 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA3__IPU1_CSI1_DATA06 0x1a8 0x578 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1a8 0x578 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03 0x1a8 0x578 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA3__EPDC_BDR1 0x1a8 0x578 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA4__EIM_AD04 0x1ac 0x57c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x1ac 0x57c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA4__IPU1_CSI1_DATA05 0x1ac 0x57c 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1ac 0x57c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04 0x1ac 0x57c 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA4__EPDC_SDCE0 0x1ac 0x57c 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA5__EIM_AD05 0x1b0 0x580 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x1b0 0x580 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA5__IPU1_CSI1_DATA04 0x1b0 0x580 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0 0x580 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05 0x1b0 0x580 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA5__EPDC_SDCE1 0x1b0 0x580 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA6__EIM_AD06 0x1b4 0x584 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x1b4 0x584 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA6__IPU1_CSI1_DATA03 0x1b4 0x584 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b4 0x584 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06 0x1b4 0x584 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA6__EPDC_SDCE2 0x1b4 0x584 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA7__EIM_AD07 0x1b8 0x588 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x1b8 0x588 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA7__IPU1_CSI1_DATA02 0x1b8 0x588 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b8 0x588 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07 0x1b8 0x588 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA7__EPDC_SDCE3 0x1b8 0x588 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA8__EIM_AD08 0x1bc 0x58c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x1bc 0x58c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA8__IPU1_CSI1_DATA01 0x1bc 0x58c 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1bc 0x58c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08 0x1bc 0x58c 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA8__EPDC_SDCE4 0x1bc 0x58c 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_DA9__EIM_AD09 0x1c0 0x590 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x1c0 0x590 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA9__IPU1_CSI1_DATA00 0x1c0 0x590 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1c0 0x590 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09 0x1c0 0x590 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA9__EPDC_SDCE5 0x1c0 0x590 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0x1c4 0x594 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x1c4 0x594 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_EB0__IPU1_CSI1_DATA11 0x1c4 0x594 0x88c 0x2 0x1 +#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY 0x1c4 0x594 0x7d4 0x4 0x0 +#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1c4 0x594 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27 0x1c4 0x594 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_EB0__EPDC_PWR_COM 0x1c4 0x594 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0x1c8 0x598 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x1c8 0x598 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_EB1__IPU1_CSI1_DATA10 0x1c8 0x598 0x888 0x2 0x1 +#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1c8 0x598 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28 0x1c8 0x598 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_EB1__EPDC_SDSHR 0x1c8 0x598 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0x1cc 0x59c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0 0x1cc 0x59c 0x7e4 0x1 0x2 +#define MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1cc 0x59c 0x8ac 0x3 0x1 +#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x1cc 0x59c 0x860 0x4 0x0 +#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1cc 0x59c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x1cc 0x59c 0x870 0x6 0x0 +#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30 0x1cc 0x59c 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_EB2__EPDC_DATA05 0x1cc 0x59c 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0x1d0 0x5a0 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY 0x1d0 0x5a0 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1d0 0x5a0 0x908 0x2 0x3 +#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B 0x1d0 0x5a0 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_EB3__UART1_RI_B 0x1d0 0x5a0 0x000 0x3 0x0 +#define MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1d0 0x5a0 0x8b4 0x4 0x1 +#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1d0 0x5a0 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03 0x1d0 0x5a0 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31 0x1d0 0x5a0 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_EB3__EPDC_SDCE0 0x1d0 0x5a0 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_EB3__EIM_ACLK_FREERUN 0x1d0 0x5a0 0x000 0x9 0x0 +#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0x1d4 0x5a4 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17 0x1d4 0x5a4 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1 0x1d4 0x5a4 0x804 0x2 0x1 +#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1d4 0x5a4 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26 0x1d4 0x5a4 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_LBA__EPDC_DATA04 0x1d4 0x5a4 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_OE__EIM_OE_B 0x1d8 0x5a8 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07 0x1d8 0x5a8 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x1d8 0x5a8 0x7f8 0x2 0x2 +#define MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1d8 0x5a8 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_OE__EPDC_PWR_IRQ 0x1d8 0x5a8 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_RW__EIM_RW 0x1dc 0x5ac 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08 0x1dc 0x5ac 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0 0x1dc 0x5ac 0x800 0x2 0x2 +#define MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1dc 0x5ac 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29 0x1dc 0x5ac 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_RW__EPDC_DATA07 0x1dc 0x5ac 0x000 0x8 0x0 +#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0x1e0 0x5b0 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B 0x1e0 0x5b0 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1e0 0x5b0 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x1e0 0x5b0 0x000 0x7 0x0 +#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1e4 0x5b4 0x828 0x1 0x0 +#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1e4 0x5b4 0x840 0x2 0x0 +#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1e4 0x5b4 0x8f4 0x3 0x0 +#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1e4 0x5b4 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_MDC__MLB_DATA 0x1e8 0x5b8 0x8e0 0x0 0x0 +#define MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1e8 0x5b8 0x000 0x1 0x0 +#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1e8 0x5b8 0x858 0x2 0x0 +#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1e8 0x5b8 0x000 0x4 0x0 +#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31 0x1e8 0x5b8 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1ec 0x5bc 0x810 0x1 0x0 +#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1ec 0x5bc 0x83c 0x2 0x0 +#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1ec 0x5bc 0x000 0x4 0x0 +#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22 0x1ec 0x5bc 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK 0x1ec 0x5bc 0x000 0x6 0x0 +#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1f0 0x5c0 0x000 0x1 0x0 +#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1f0 0x5c0 0x82c 0x2 0x0 +#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1f0 0x5c0 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1f0 0x5c0 0x000 0x6 0x0 +#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f4 0x5c4 0x790 0x0 0x0 +#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1f4 0x5c4 0x000 0x1 0x0 +#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1f4 0x5c4 0x834 0x2 0x0 +#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN 0x1f4 0x5c4 0x8f0 0x3 0x1 +#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0 +#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1f4 0x5c4 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1f8 0x5c8 0x818 0x1 0x0 +#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1f8 0x5c8 0x838 0x2 0x0 +#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1f8 0x5c8 0x000 0x3 0x0 +#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1f8 0x5c8 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_RXD1__MLB_SIG 0x1fc 0x5cc 0x8e4 0x0 0x0 +#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1fc 0x5cc 0x81c 0x1 0x0 +#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1fc 0x5cc 0x830 0x2 0x0 +#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1fc 0x5cc 0x000 0x4 0x0 +#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1fc 0x5cc 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x200 0x5d0 0x000 0x1 0x0 +#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x200 0x5d0 0x850 0x2 0x0 +#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x200 0x5d0 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_TX_EN__I2C4_SCL 0x200 0x5d0 0x880 0x9 0x0 +#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x204 0x5d4 0x000 0x1 0x0 +#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x204 0x5d4 0x854 0x2 0x0 +#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x204 0x5d4 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_TXD1__MLB_CLK 0x208 0x5d8 0x8dc 0x0 0x0 +#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x208 0x5d8 0x000 0x1 0x0 +#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3 0x208 0x5d8 0x84c 0x2 0x0 +#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x208 0x5d8 0x000 0x4 0x0 +#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x208 0x5d8 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_TXD1__I2C4_SDA 0x208 0x5d8 0x884 0x9 0x0 +#define MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x20c 0x5dc 0x000 0x0 0x0 +#define MX6QDL_PAD_GPIO_0__KEY_COL5 0x20c 0x5dc 0x8c0 0x2 0x1 +#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK 0x20c 0x5dc 0x794 0x3 0x0 +#define MX6QDL_PAD_GPIO_0__EPIT1_OUT 0x20c 0x5dc 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x20c 0x5dc 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x20c 0x5dc 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5 0x20c 0x5dc 0x000 0x7 0x0 +#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK 0x210 0x5e0 0x83c 0x0 0x1 +#define MX6QDL_PAD_GPIO_1__WDOG2_B 0x210 0x5e0 0x000 0x1 0x0 +#define MX6QDL_PAD_GPIO_1__KEY_ROW5 0x210 0x5e0 0x8cc 0x2 0x1 +#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x210 0x5e0 0x790 0x3 0x1 +#define MX6QDL_PAD_GPIO_1__PWM2_OUT 0x210 0x5e0 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x210 0x5e0 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_1__SD1_CD_B 0x210 0x5e0 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2 0x214 0x5e4 0x850 0x0 0x1 +#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x214 0x5e4 0x000 0x1 0x0 +#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x214 0x5e4 0x80c 0x2 0x0 +#define MX6QDL_PAD_GPIO_16__SD1_LCTL 0x214 0x5e4 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_16__SPDIF_IN 0x214 0x5e4 0x8f0 0x4 0x2 +#define MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x214 0x5e4 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_16__I2C3_SDA 0x214 0x5e4 0x87c 0x6 0x1 +#define MX6QDL_PAD_GPIO_16__JTAG_DE_B 0x214 0x5e4 0x000 0x7 0x0 +#define MX6QDL_PAD_GPIO_17__ESAI_TX0 0x218 0x5e8 0x844 0x0 0x0 +#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x218 0x5e8 0x000 0x1 0x0 +#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY 0x218 0x5e8 0x7d4 0x2 0x1 +#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0 0x218 0x5e8 0x8e8 0x3 0x1 +#define MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x218 0x5e8 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x218 0x5e8 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_18__ESAI_TX1 0x21c 0x5ec 0x848 0x0 0x0 +#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x21c 0x5ec 0x814 0x1 0x0 +#define MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x21c 0x5ec 0x000 0x2 0x0 +#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1 0x21c 0x5ec 0x8ec 0x3 0x1 +#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK 0x21c 0x5ec 0x794 0x4 0x1 +#define MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x21c 0x5ec 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL 0x21c 0x5ec 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_19__KEY_COL5 0x220 0x5f0 0x8c0 0x0 0x2 +#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x220 0x5f0 0x000 0x1 0x0 +#define MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x220 0x5f0 0x000 0x2 0x0 +#define MX6QDL_PAD_GPIO_19__CCM_CLKO1 0x220 0x5f0 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x220 0x5f0 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x220 0x5f0 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x220 0x5f0 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS 0x224 0x5f4 0x830 0x0 0x1 +#define MX6QDL_PAD_GPIO_2__KEY_ROW6 0x224 0x5f4 0x8d0 0x2 0x1 +#define MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x224 0x5f4 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_2__SD2_WP 0x224 0x5f4 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_2__MLB_DATA 0x224 0x5f4 0x8e0 0x7 0x1 +#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK 0x228 0x5f8 0x834 0x0 0x1 +#define MX6QDL_PAD_GPIO_3__I2C3_SCL 0x228 0x5f8 0x878 0x2 0x1 +#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x228 0x5f8 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x228 0x5f8 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x228 0x5f8 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_3__USB_H1_OC 0x228 0x5f8 0x924 0x6 0x1 +#define MX6QDL_PAD_GPIO_3__MLB_CLK 0x228 0x5f8 0x8dc 0x7 0x1 +#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK 0x22c 0x5fc 0x838 0x0 0x1 +#define MX6QDL_PAD_GPIO_4__KEY_COL7 0x22c 0x5fc 0x8c8 0x2 0x1 +#define MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x22c 0x5fc 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_4__SD2_CD_B 0x22c 0x5fc 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x230 0x600 0x84c 0x0 0x1 +#define MX6QDL_PAD_GPIO_5__KEY_ROW7 0x230 0x600 0x8d4 0x2 0x1 +#define MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x230 0x600 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x230 0x600 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_5__I2C3_SCL 0x230 0x600 0x878 0x6 0x2 +#define MX6QDL_PAD_GPIO_5__ARM_EVENTI 0x230 0x600 0x000 0x7 0x0 +#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK 0x234 0x604 0x840 0x0 0x1 +#define MX6QDL_PAD_GPIO_6__I2C3_SDA 0x234 0x604 0x87c 0x2 0x2 +#define MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x234 0x604 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_6__SD2_LCTL 0x234 0x604 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_6__MLB_SIG 0x234 0x604 0x8e4 0x7 0x1 +#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1 0x238 0x608 0x854 0x0 0x1 +#define MX6QDL_PAD_GPIO_7__EPIT1_OUT 0x238 0x608 0x000 0x2 0x0 +#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x238 0x608 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x238 0x608 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA 0x238 0x608 0x904 0x4 0x2 +#define MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x238 0x608 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK 0x238 0x608 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE 0x238 0x608 0x000 0x7 0x0 +#define MX6QDL_PAD_GPIO_7__I2C4_SCL 0x238 0x608 0x880 0x8 0x1 +#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0 0x23c 0x60c 0x858 0x0 0x1 +#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x23c 0x60c 0x000 0x1 0x0 +#define MX6QDL_PAD_GPIO_8__EPIT2_OUT 0x23c 0x60c 0x000 0x2 0x0 +#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x23c 0x60c 0x7c8 0x3 0x0 +#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x23c 0x60c 0x904 0x4 0x3 +#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA 0x23c 0x60c 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x23c 0x60c 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK 0x23c 0x60c 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x23c 0x60c 0x000 0x7 0x0 +#define MX6QDL_PAD_GPIO_8__I2C4_SDA 0x23c 0x60c 0x884 0x8 0x1 +#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x240 0x610 0x82c 0x0 0x1 +#define MX6QDL_PAD_GPIO_9__WDOG1_B 0x240 0x610 0x000 0x1 0x0 +#define MX6QDL_PAD_GPIO_9__KEY_COL6 0x240 0x610 0x8c4 0x2 0x1 +#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B 0x240 0x610 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_9__PWM1_OUT 0x240 0x610 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x240 0x610 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_9__SD1_WP 0x240 0x610 0x92c 0x6 0x1 +#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x244 0x62c 0x7d8 0x0 0x3 +#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x244 0x62c 0x824 0x1 0x0 +#define MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x244 0x62c 0x7c0 0x2 0x1 +#define MX6QDL_PAD_KEY_COL0__KEY_COL0 0x244 0x62c 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x244 0x62c 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x244 0x62c 0x914 0x4 0x2 +#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x244 0x62c 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT 0x244 0x62c 0x000 0x6 0x0 +#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x248 0x630 0x7dc 0x0 0x3 +#define MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x248 0x630 0x810 0x1 0x1 +#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x248 0x630 0x7c4 0x2 0x1 +#define MX6QDL_PAD_KEY_COL1__KEY_COL1 0x248 0x630 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x248 0x630 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x248 0x630 0x91c 0x4 0x2 +#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x248 0x630 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT 0x248 0x630 0x000 0x6 0x0 +#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1 0x24c 0x634 0x7e8 0x0 0x2 +#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x24c 0x634 0x820 0x1 0x0 +#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x24c 0x634 0x000 0x2 0x0 +#define MX6QDL_PAD_KEY_COL2__KEY_COL2 0x24c 0x634 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_COL2__ENET_MDC 0x24c 0x634 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x24c 0x634 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x24c 0x634 0x000 0x6 0x0 +#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3 0x250 0x638 0x7f0 0x0 0x1 +#define MX6QDL_PAD_KEY_COL3__ENET_CRS 0x250 0x638 0x000 0x1 0x0 +#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x250 0x638 0x860 0x2 0x1 +#define MX6QDL_PAD_KEY_COL3__KEY_COL3 0x250 0x638 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x250 0x638 0x870 0x4 0x1 +#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x250 0x638 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x250 0x638 0x8f0 0x6 0x3 +#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x254 0x63c 0x000 0x0 0x0 +#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4 0x254 0x63c 0x000 0x1 0x0 +#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x254 0x63c 0x920 0x2 0x1 +#define MX6QDL_PAD_KEY_COL4__KEY_COL4 0x254 0x63c 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B 0x254 0x63c 0x918 0x4 0x2 +#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B 0x254 0x63c 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x254 0x63c 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x258 0x640 0x7e0 0x0 0x3 +#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x258 0x640 0x000 0x1 0x0 +#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x258 0x640 0x7b4 0x2 0x1 +#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0 0x258 0x640 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x258 0x640 0x914 0x4 0x3 +#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x258 0x640 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x258 0x640 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT 0x258 0x640 0x000 0x6 0x0 +#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x25c 0x644 0x7e4 0x0 0x3 +#define MX6QDL_PAD_KEY_ROW1__ENET_COL 0x25c 0x644 0x000 0x1 0x0 +#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x25c 0x644 0x7b0 0x2 0x1 +#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x25c 0x644 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x25c 0x644 0x91c 0x4 0x3 +#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x25c 0x644 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x25c 0x644 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x25c 0x644 0x000 0x6 0x0 +#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2 0x260 0x648 0x7ec 0x0 0x1 +#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x260 0x648 0x000 0x1 0x0 +#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x260 0x648 0x7c8 0x2 0x1 +#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x260 0x648 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT 0x260 0x648 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x260 0x648 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x260 0x648 0x85c 0x6 0x1 +#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK 0x264 0x64c 0x794 0x1 0x2 +#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x264 0x64c 0x864 0x2 0x1 +#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x264 0x64c 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x264 0x64c 0x874 0x4 0x1 +#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x264 0x64c 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT 0x264 0x64c 0x000 0x6 0x0 +#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x268 0x650 0x7cc 0x0 0x0 +#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5 0x268 0x650 0x000 0x1 0x0 +#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x268 0x650 0x000 0x2 0x0 +#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4 0x268 0x650 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B 0x268 0x650 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B 0x268 0x650 0x918 0x4 0x3 +#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x268 0x650 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x26c 0x654 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x26c 0x654 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x26c 0x654 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x270 0x658 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x270 0x658 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x274 0x65c 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x274 0x65c 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0x278 0x660 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT 0x278 0x660 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x278 0x660 0x000 0x2 0x0 +#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x278 0x660 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B 0x27c 0x664 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0 0x27c 0x664 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0 0x27c 0x664 0x844 0x2 0x1 +#define MX6QDL_PAD_NANDF_CS2__EIM_CRE 0x27c 0x664 0x000 0x3 0x0 +#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x27c 0x664 0x000 0x4 0x0 +#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x27c 0x664 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B 0x280 0x668 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1 0x280 0x668 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x280 0x668 0x848 0x2 0x1 +#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26 0x280 0x668 0x000 0x3 0x0 +#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x280 0x668 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_CS3__I2C4_SDA 0x280 0x668 0x884 0x9 0x2 +#define MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x284 0x66c 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x284 0x66c 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x284 0x66c 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x288 0x670 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x288 0x670 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x288 0x670 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x28c 0x674 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x28c 0x674 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x28c 0x674 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x290 0x678 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x290 0x678 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x290 0x678 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x294 0x67c 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x294 0x67c 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x294 0x67c 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x298 0x680 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x298 0x680 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x298 0x680 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x29c 0x684 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x29c 0x684 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x29c 0x684 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x2a0 0x688 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x2a0 0x688 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x2a0 0x688 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x2a4 0x68c 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x2a4 0x68c 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x2a8 0x690 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x2a8 0x690 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_WP_B__I2C4_SCL 0x2a8 0x690 0x880 0x9 0x2 +#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY 0x2ac 0x694 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x2ac 0x694 0x818 0x1 0x1 +#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25 0x2ac 0x694 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG 0x2b0 0x698 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x2b0 0x698 0x81c 0x1 0x1 +#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27 0x2b0 0x698 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA 0x2b4 0x69c 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x2b4 0x69c 0x820 0x1 0x1 +#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28 0x2b4 0x69c 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE 0x2b8 0x6a0 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x2b8 0x6a0 0x824 0x1 0x1 +#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29 0x2b8 0x6a0 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x2bc 0x6a4 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x2bc 0x6a4 0x828 0x1 0x1 +#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24 0x2bc 0x6a4 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x2c0 0x6a8 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x2c0 0x6a8 0x814 0x1 0x1 +#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x2c0 0x6a8 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY 0x2c4 0x6ac 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x2c4 0x6ac 0x000 0x1 0x0 +#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x2c4 0x6ac 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG 0x2c8 0x6b0 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x2c8 0x6b0 0x000 0x1 0x0 +#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x2c8 0x6b0 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA 0x2cc 0x6b4 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x2cc 0x6b4 0x000 0x1 0x0 +#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x2cc 0x6b4 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE 0x2d0 0x6b8 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x2d0 0x6b8 0x000 0x1 0x0 +#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x2d0 0x6b8 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x2d4 0x6bc 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x2d4 0x6bc 0x000 0x1 0x0 +#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x2d4 0x6bc 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x2d4 0x6bc 0x80c 0x7 0x1 +#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x2d8 0x6c0 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x2d8 0x6c0 0x000 0x1 0x0 +#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x2d8 0x6c0 0x8f4 0x2 0x1 +#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19 0x2d8 0x6c0 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x2d8 0x6c0 0x000 0x7 0x0 +#define MX6QDL_PAD_SD1_CLK__SD1_CLK 0x2dc 0x6c4 0x928 0x0 0x1 +#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN 0x2dc 0x6c4 0x000 0x3 0x0 +#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x2dc 0x6c4 0x000 0x5 0x0 +#define MX6QDL_PAD_SD1_CMD__SD1_CMD 0x2e0 0x6c8 0x000 0x0 0x0 +#define MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x2e0 0x6c8 0x000 0x2 0x0 +#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1 0x2e0 0x6c8 0x000 0x3 0x0 +#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x2e0 0x6c8 0x000 0x5 0x0 +#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x2e4 0x6cc 0x000 0x0 0x0 +#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1 0x2e4 0x6cc 0x000 0x3 0x0 +#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x2e4 0x6cc 0x000 0x5 0x0 +#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x2e8 0x6d0 0x000 0x0 0x0 +#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x2e8 0x6d0 0x000 0x2 0x0 +#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2 0x2e8 0x6d0 0x000 0x3 0x0 +#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x2e8 0x6d0 0x000 0x5 0x0 +#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x2ec 0x6d4 0x000 0x0 0x0 +#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2 0x2ec 0x6d4 0x000 0x2 0x0 +#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x2ec 0x6d4 0x000 0x3 0x0 +#define MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x2ec 0x6d4 0x000 0x4 0x0 +#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x2ec 0x6d4 0x000 0x5 0x0 +#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x2ec 0x6d4 0x000 0x6 0x0 +#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x2f0 0x6d8 0x000 0x0 0x0 +#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3 0x2f0 0x6d8 0x000 0x2 0x0 +#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x2f0 0x6d8 0x000 0x3 0x0 +#define MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x2f0 0x6d8 0x000 0x4 0x0 +#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x2f0 0x6d8 0x000 0x5 0x0 +#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x2f0 0x6d8 0x000 0x6 0x0 +#define MX6QDL_PAD_SD2_CLK__SD2_CLK 0x2f4 0x6dc 0x930 0x0 0x1 +#define MX6QDL_PAD_SD2_CLK__KEY_COL5 0x2f4 0x6dc 0x8c0 0x2 0x3 +#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS 0x2f4 0x6dc 0x7a4 0x3 0x1 +#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x2f4 0x6dc 0x000 0x5 0x0 +#define MX6QDL_PAD_SD2_CMD__SD2_CMD 0x2f8 0x6e0 0x000 0x0 0x0 +#define MX6QDL_PAD_SD2_CMD__KEY_ROW5 0x2f8 0x6e0 0x8cc 0x2 0x2 +#define MX6QDL_PAD_SD2_CMD__AUD4_RXC 0x2f8 0x6e0 0x7a0 0x3 0x1 +#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x2f8 0x6e0 0x000 0x5 0x0 +#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x2fc 0x6e4 0x000 0x0 0x0 +#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x2fc 0x6e4 0x798 0x3 0x1 +#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7 0x2fc 0x6e4 0x8d4 0x4 0x2 +#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x2fc 0x6e4 0x000 0x5 0x0 +#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT 0x2fc 0x6e4 0x000 0x6 0x0 +#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x300 0x6e8 0x000 0x0 0x0 +#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0x300 0x6e8 0x000 0x2 0x0 +#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x300 0x6e8 0x7ac 0x3 0x1 +#define MX6QDL_PAD_SD2_DAT1__KEY_COL7 0x300 0x6e8 0x8c8 0x4 0x2 +#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x300 0x6e8 0x000 0x5 0x0 +#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x304 0x6ec 0x000 0x0 0x0 +#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B 0x304 0x6ec 0x000 0x2 0x0 +#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x304 0x6ec 0x79c 0x3 0x1 +#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6 0x304 0x6ec 0x8d0 0x4 0x2 +#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x304 0x6ec 0x000 0x5 0x0 +#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x308 0x6f0 0x000 0x0 0x0 +#define MX6QDL_PAD_SD2_DAT3__KEY_COL6 0x308 0x6f0 0x8c4 0x2 0x2 +#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x308 0x6f0 0x7a8 0x3 0x1 +#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x308 0x6f0 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_CLK__SD3_CLK 0x30c 0x6f4 0x934 0x0 0x1 +#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x30c 0x6f4 0x900 0x1 0x2 +#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B 0x30c 0x6f4 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x30c 0x6f4 0x7c8 0x2 0x2 +#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x30c 0x6f4 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_CMD__SD3_CMD 0x310 0x6f8 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x310 0x6f8 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B 0x310 0x6f8 0x900 0x1 0x3 +#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x310 0x6f8 0x000 0x2 0x0 +#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x310 0x6f8 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x314 0x6fc 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x314 0x6fc 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B 0x314 0x6fc 0x8f8 0x1 0x2 +#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x314 0x6fc 0x000 0x2 0x0 +#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04 0x314 0x6fc 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x318 0x700 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x318 0x700 0x8f8 0x1 0x3 +#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B 0x318 0x700 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x318 0x700 0x7cc 0x2 0x1 +#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05 0x318 0x700 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x31c 0x704 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x31c 0x704 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x320 0x708 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x320 0x708 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B 0x320 0x708 0x908 0x1 0x4 +#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07 0x320 0x708 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x324 0x70c 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x324 0x70c 0x904 0x1 0x4 +#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA 0x324 0x70c 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x324 0x70c 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x328 0x710 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x328 0x710 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA 0x328 0x710 0x904 0x1 0x5 +#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x328 0x710 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x32c 0x714 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x32c 0x714 0x8fc 0x1 0x2 +#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA 0x32c 0x714 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x32c 0x714 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x330 0x718 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x330 0x718 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA 0x330 0x718 0x8fc 0x1 0x3 +#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x330 0x718 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_RST__SD3_RESET 0x334 0x71c 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x334 0x71c 0x908 0x1 0x5 +#define MX6QDL_PAD_SD3_RST__UART3_CTS_B 0x334 0x71c 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x334 0x71c 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_CLK__SD4_CLK 0x338 0x720 0x938 0x0 0x1 +#define MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x338 0x720 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x338 0x720 0x90c 0x2 0x2 +#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x338 0x720 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x338 0x720 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_CMD__SD4_CMD 0x33c 0x724 0x000 0x0 0x0 +#define MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x33c 0x724 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x33c 0x724 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x33c 0x724 0x90c 0x2 0x3 +#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x33c 0x724 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x340 0x728 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x340 0x728 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x340 0x728 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x344 0x72c 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x344 0x72c 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x344 0x72c 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x348 0x730 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x348 0x730 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x348 0x730 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x34c 0x734 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x34c 0x734 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x350 0x738 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x350 0x738 0x904 0x2 0x6 +#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x350 0x738 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x350 0x738 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x354 0x73c 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x354 0x73c 0x900 0x2 0x4 +#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x354 0x73c 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x354 0x73c 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x358 0x740 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x358 0x740 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x358 0x740 0x900 0x2 0x5 +#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14 0x358 0x740 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x35c 0x744 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x35c 0x744 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x35c 0x744 0x904 0x2 0x7 +#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x35c 0x744 0x000 0x5 0x0 #endif /* __DTS_IMX6DL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts index 95da71185a4a737031f2fd4b815b6155cfb01211..a6ce7b487ad72f13a688d6e741aa91cc35b2008b 100644 --- a/arch/arm/boot/dts/imx6dl-sabreauto.dts +++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts @@ -15,25 +15,3 @@ model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board"; compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl"; }; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6DL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 - MX6DL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 - >; - }; - }; - - ecspi1 { - pinctrl_ecspi1_sabreauto: ecspi1-sabreauto { - fsl,pins = < - MX6DL_PAD_EIM_D19__GPIO3_IO19 0x80000000 - >; - }; - }; -}; diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts index 8989df2b89e5e130d6f4a749c5ee66566540eed8..1e45f2f9d0b6bce33210988fb17ff816a173c8b7 100644 --- a/arch/arm/boot/dts/imx6dl-sabresd.dts +++ b/arch/arm/boot/dts/imx6dl-sabresd.dts @@ -15,22 +15,3 @@ model = "Freescale i.MX6 DualLite SABRE Smart Device Board"; compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; }; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6DL_PAD_GPIO_4__GPIO1_IO04 0x80000000 - MX6DL_PAD_GPIO_5__GPIO1_IO05 0x80000000 - MX6DL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 - MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 - MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 - MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 - MX6DL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - >; - }; - }; -}; diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts index bfc59c3566a44ee20ce299bbc80f9d33a6924e7c..e672891c1626757cd751888a9b97b78066558947 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard.dts @@ -10,6 +10,7 @@ */ /dts-v1/; #include "imx6dl.dtsi" +#include "imx6qdl-wandboard.dtsi" / { model = "Wandboard i.MX6 Dual Lite Board"; @@ -19,26 +20,3 @@ reg = <0x10000000 0x40000000>; }; }; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_2>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 2b3ecd67935017eb694a4bc54741d059d115136b..9e8ae118fdd4e6c6c1df48a0b4a66c20e0504ae6 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -8,8 +8,8 @@ * */ -#include "imx6qdl.dtsi" #include "imx6dl-pinfunc.h" +#include "imx6qdl.dtsi" / { cpus { @@ -32,238 +32,15 @@ }; soc { + ocram: sram@00900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + clocks = <&clks 142>; + }; + aips1: aips-bus@02000000 { iomuxc: iomuxc@020e0000 { compatible = "fsl,imx6dl-iomuxc"; - reg = <0x020e0000 0x4000>; - - audmux { - pinctrl_audmux_2: audmux-2 { - fsl,pins = < - MX6DL_PAD_CSI0_DAT7__AUD3_RXD 0x80000000 - MX6DL_PAD_CSI0_DAT4__AUD3_TXC 0x80000000 - MX6DL_PAD_CSI0_DAT5__AUD3_TXD 0x80000000 - MX6DL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000 - >; - }; - }; - - ecspi1 { - pinctrl_ecspi1_1: ecspi1grp-1 { - fsl,pins = < - MX6DL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6DL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - >; - }; - }; - - enet { - pinctrl_enet_1: enetgrp-1 { - fsl,pins = < - MX6DL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6DL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6DL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6DL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6DL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6DL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6DL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6DL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6DL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6DL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6DL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6DL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6DL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; - - pinctrl_enet_2: enetgrp-2 { - fsl,pins = < - MX6DL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 - MX6DL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 - MX6DL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6DL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6DL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6DL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6DL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6DL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6DL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6DL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6DL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6DL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - >; - }; - }; - - gpmi-nand { - pinctrl_gpmi_nand_1: gpmi-nand-1 { - fsl,pins = < - MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - MX6DL_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; - }; - - i2c1 { - pinctrl_i2c1_2: i2c1grp-2 { - fsl,pins = < - MX6DL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - MX6DL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 - >; - }; - }; - - uart1 { - pinctrl_uart1_1: uart1grp-1 { - fsl,pins = < - MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; - }; - - uart4 { - pinctrl_uart4_1: uart4grp-1 { - fsl,pins = < - MX6DL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6DL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; - }; - - usbotg { - pinctrl_usbotg_2: usbotggrp-2 { - fsl,pins = < - MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - >; - }; - }; - - usdhc2 { - pinctrl_usdhc2_1: usdhc2grp-1 { - fsl,pins = < - MX6DL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6DL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6DL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6DL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6DL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6DL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6DL_PAD_NANDF_D4__SD2_DATA4 0x17059 - MX6DL_PAD_NANDF_D5__SD2_DATA5 0x17059 - MX6DL_PAD_NANDF_D6__SD2_DATA6 0x17059 - MX6DL_PAD_NANDF_D7__SD2_DATA7 0x17059 - >; - }; - }; - - usdhc3 { - pinctrl_usdhc3_1: usdhc3grp-1 { - fsl,pins = < - MX6DL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6DL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6DL_PAD_SD3_DAT4__SD3_DATA4 0x17059 - MX6DL_PAD_SD3_DAT5__SD3_DATA5 0x17059 - MX6DL_PAD_SD3_DAT6__SD3_DATA6 0x17059 - MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x17059 - >; - }; - - pinctrl_usdhc3_2: usdhc3grp_2 { - fsl,pins = < - MX6DL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6DL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; - }; - - weim { - pinctrl_weim_cs0_1: weim_cs0grp-1 { - fsl,pins = < - MX6DL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 - >; - }; - - pinctrl_weim_nor_1: weim_norgrp-1 { - fsl,pins = < - MX6DL_PAD_EIM_OE__EIM_OE_B 0xb0b1 - MX6DL_PAD_EIM_RW__EIM_RW 0xb0b1 - MX6DL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 - /* data */ - MX6DL_PAD_EIM_D16__EIM_DATA16 0x1b0b0 - MX6DL_PAD_EIM_D17__EIM_DATA17 0x1b0b0 - MX6DL_PAD_EIM_D18__EIM_DATA18 0x1b0b0 - MX6DL_PAD_EIM_D19__EIM_DATA19 0x1b0b0 - MX6DL_PAD_EIM_D20__EIM_DATA20 0x1b0b0 - MX6DL_PAD_EIM_D21__EIM_DATA21 0x1b0b0 - MX6DL_PAD_EIM_D22__EIM_DATA22 0x1b0b0 - MX6DL_PAD_EIM_D23__EIM_DATA23 0x1b0b0 - MX6DL_PAD_EIM_D24__EIM_DATA24 0x1b0b0 - MX6DL_PAD_EIM_D25__EIM_DATA25 0x1b0b0 - MX6DL_PAD_EIM_D26__EIM_DATA26 0x1b0b0 - MX6DL_PAD_EIM_D27__EIM_DATA27 0x1b0b0 - MX6DL_PAD_EIM_D28__EIM_DATA28 0x1b0b0 - MX6DL_PAD_EIM_D29__EIM_DATA29 0x1b0b0 - MX6DL_PAD_EIM_D30__EIM_DATA30 0x1b0b0 - MX6DL_PAD_EIM_D31__EIM_DATA31 0x1b0b0 - /* address */ - MX6DL_PAD_EIM_A23__EIM_ADDR23 0xb0b1 - MX6DL_PAD_EIM_A22__EIM_ADDR22 0xb0b1 - MX6DL_PAD_EIM_A21__EIM_ADDR21 0xb0b1 - MX6DL_PAD_EIM_A20__EIM_ADDR20 0xb0b1 - MX6DL_PAD_EIM_A19__EIM_ADDR19 0xb0b1 - MX6DL_PAD_EIM_A18__EIM_ADDR18 0xb0b1 - MX6DL_PAD_EIM_A17__EIM_ADDR17 0xb0b1 - MX6DL_PAD_EIM_A16__EIM_ADDR16 0xb0b1 - MX6DL_PAD_EIM_DA15__EIM_AD15 0xb0b1 - MX6DL_PAD_EIM_DA14__EIM_AD14 0xb0b1 - MX6DL_PAD_EIM_DA13__EIM_AD13 0xb0b1 - MX6DL_PAD_EIM_DA12__EIM_AD12 0xb0b1 - MX6DL_PAD_EIM_DA11__EIM_AD11 0xb0b1 - MX6DL_PAD_EIM_DA10__EIM_AD10 0xb0b1 - MX6DL_PAD_EIM_DA9__EIM_AD09 0xb0b1 - MX6DL_PAD_EIM_DA8__EIM_AD08 0xb0b1 - MX6DL_PAD_EIM_DA7__EIM_AD07 0xb0b1 - MX6DL_PAD_EIM_DA6__EIM_AD06 0xb0b1 - MX6DL_PAD_EIM_DA5__EIM_AD05 0xb0b1 - MX6DL_PAD_EIM_DA4__EIM_AD04 0xb0b1 - MX6DL_PAD_EIM_DA3__EIM_AD03 0xb0b1 - MX6DL_PAD_EIM_DA2__EIM_AD02 0xb0b1 - MX6DL_PAD_EIM_DA1__EIM_AD01 0xb0b1 - MX6DL_PAD_EIM_DA0__EIM_AD00 0xb0b1 - >; - }; - - }; - }; pxp: pxp@020f0000 { @@ -294,3 +71,20 @@ }; }; }; + +&ldb { + clocks = <&clks 33>, <&clks 34>, + <&clks 39>, <&clks 40>, + <&clks 135>, <&clks 136>; + clock-names = "di0_pll", "di1_pll", + "di0_sel", "di1_sel", + "di0", "di1"; + + lvds-channel@0 { + crtcs = <&ipu1 0>, <&ipu1 1>; + }; + + lvds-channel@1 { + crtcs = <&ipu1 0>, <&ipu1 1>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 4e54fde591bdbd7d160696d59df5cb134612d314..edf1bd9671642e9230b61d71c55a18a7b7c2a554 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -57,7 +57,7 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - MX6Q_PAD_EIM_D25__GPIO3_IO25 0x80000000 + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000 >; }; }; @@ -65,8 +65,8 @@ arm2 { pinctrl_usdhc3_arm2: usdhc3grp-arm2 { fsl,pins = < - MX6Q_PAD_NANDF_CS0__GPIO6_IO11 0x80000000 - MX6Q_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 >; }; }; @@ -97,6 +97,14 @@ status = "okay"; }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_2>; + fsl,dte-mode; + fsl,uart-has-rtscts; + status = "okay"; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4_1>; diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi index f5e1981025ed6e83c1068c2776de009bcba340e4..1a3b50d4d8fa4632afb7e8bc28a215b389f50e26 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi @@ -20,6 +20,110 @@ }; }; +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3_1>; + status = "okay"; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 0>; + + flash@0 { + compatible = "m25p80"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + pmic@58 { + compatible = "dialog,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio4>; + interrupts = <17 0x8>; /* active-low GPIO4_17 */ + + regulators { + vddcore_reg: bcore1 { + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1380000>; + regulator-always-on; + }; + + vddsoc_reg: bcore2 { + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1380000>; + regulator-always-on; + }; + + vdd_ddr3_reg: bpro { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vdd_3v3_reg: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_buckmem_reg: bmem { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_eth_reg: bio { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_eth_io_reg: ldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_mx6_snvs_reg: ldo5 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vdd_3v3_pmic_io_reg: ldo6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sd0_reg: ldo9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_sd1_reg: ldo10 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_mx6_high_reg: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + }; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -27,7 +131,9 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - MX6Q_PAD_EIM_D23__GPIO3_IO23 0x80000000 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ >; }; }; @@ -35,8 +141,8 @@ pfla02 { pinctrl_usdhc3_pfla02: usdhc3grp-pfla02 { fsl,pins = < - MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 - MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 >; }; }; diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h index faea6e1ada0012b8a5cb2cfa7c9552f4a510a390..c0e38a45e4bb487493ed8400328eb27d8a8965b2 100644 --- a/arch/arm/boot/dts/imx6q-pinfunc.h +++ b/arch/arm/boot/dts/imx6q-pinfunc.h @@ -14,1028 +14,1032 @@ * The pin function ID is a tuple of * */ -#define MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x04c 0x360 0x000 0x0 0x0 -#define MX6Q_PAD_SD2_DAT1__ECSPI5_SS0 0x04c 0x360 0x834 0x1 0x0 -#define MX6Q_PAD_SD2_DAT1__EIM_CS2_B 0x04c 0x360 0x000 0x2 0x0 -#define MX6Q_PAD_SD2_DAT1__AUD4_TXFS 0x04c 0x360 0x7c8 0x3 0x0 -#define MX6Q_PAD_SD2_DAT1__KEY_COL7 0x04c 0x360 0x8f0 0x4 0x0 -#define MX6Q_PAD_SD2_DAT1__GPIO1_IO14 0x04c 0x360 0x000 0x5 0x0 -#define MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x050 0x364 0x000 0x0 0x0 -#define MX6Q_PAD_SD2_DAT2__ECSPI5_SS1 0x050 0x364 0x838 0x1 0x0 -#define MX6Q_PAD_SD2_DAT2__EIM_CS3_B 0x050 0x364 0x000 0x2 0x0 -#define MX6Q_PAD_SD2_DAT2__AUD4_TXD 0x050 0x364 0x7b8 0x3 0x0 -#define MX6Q_PAD_SD2_DAT2__KEY_ROW6 0x050 0x364 0x8f8 0x4 0x0 -#define MX6Q_PAD_SD2_DAT2__GPIO1_IO13 0x050 0x364 0x000 0x5 0x0 -#define MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x054 0x368 0x000 0x0 0x0 -#define MX6Q_PAD_SD2_DAT0__ECSPI5_MISO 0x054 0x368 0x82c 0x1 0x0 -#define MX6Q_PAD_SD2_DAT0__AUD4_RXD 0x054 0x368 0x7b4 0x3 0x0 -#define MX6Q_PAD_SD2_DAT0__KEY_ROW7 0x054 0x368 0x8fc 0x4 0x0 -#define MX6Q_PAD_SD2_DAT0__GPIO1_IO15 0x054 0x368 0x000 0x5 0x0 -#define MX6Q_PAD_SD2_DAT0__DCIC2_OUT 0x054 0x368 0x000 0x6 0x0 -#define MX6Q_PAD_RGMII_TXC__USB_H2_DATA 0x058 0x36c 0x000 0x0 0x0 -#define MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x058 0x36c 0x000 0x1 0x0 -#define MX6Q_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x058 0x36c 0x918 0x2 0x0 -#define MX6Q_PAD_RGMII_TXC__GPIO6_IO19 0x058 0x36c 0x000 0x5 0x0 -#define MX6Q_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x058 0x36c 0x000 0x7 0x0 -#define MX6Q_PAD_RGMII_TD0__HSI_TX_READY 0x05c 0x370 0x000 0x0 0x0 -#define MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x05c 0x370 0x000 0x1 0x0 -#define MX6Q_PAD_RGMII_TD0__GPIO6_IO20 0x05c 0x370 0x000 0x5 0x0 -#define MX6Q_PAD_RGMII_TD1__HSI_RX_FLAG 0x060 0x374 0x000 0x0 0x0 -#define MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x060 0x374 0x000 0x1 0x0 -#define MX6Q_PAD_RGMII_TD1__GPIO6_IO21 0x060 0x374 0x000 0x5 0x0 -#define MX6Q_PAD_RGMII_TD2__HSI_RX_DATA 0x064 0x378 0x000 0x0 0x0 -#define MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x064 0x378 0x000 0x1 0x0 -#define MX6Q_PAD_RGMII_TD2__GPIO6_IO22 0x064 0x378 0x000 0x5 0x0 -#define MX6Q_PAD_RGMII_TD3__HSI_RX_WAKE 0x068 0x37c 0x000 0x0 0x0 -#define MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x068 0x37c 0x000 0x1 0x0 -#define MX6Q_PAD_RGMII_TD3__GPIO6_IO23 0x068 0x37c 0x000 0x5 0x0 -#define MX6Q_PAD_RGMII_RX_CTL__USB_H3_DATA 0x06c 0x380 0x000 0x0 0x0 -#define MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x06c 0x380 0x858 0x1 0x0 -#define MX6Q_PAD_RGMII_RX_CTL__GPIO6_IO24 0x06c 0x380 0x000 0x5 0x0 -#define MX6Q_PAD_RGMII_RD0__HSI_RX_READY 0x070 0x384 0x000 0x0 0x0 -#define MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x070 0x384 0x848 0x1 0x0 -#define MX6Q_PAD_RGMII_RD0__GPIO6_IO25 0x070 0x384 0x000 0x5 0x0 -#define MX6Q_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x074 0x388 0x000 0x0 0x0 -#define MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x074 0x388 0x000 0x1 0x0 -#define MX6Q_PAD_RGMII_TX_CTL__GPIO6_IO26 0x074 0x388 0x000 0x5 0x0 -#define MX6Q_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x074 0x388 0x83c 0x7 0x0 -#define MX6Q_PAD_RGMII_RD1__HSI_TX_FLAG 0x078 0x38c 0x000 0x0 0x0 -#define MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x078 0x38c 0x84c 0x1 0x0 -#define MX6Q_PAD_RGMII_RD1__GPIO6_IO27 0x078 0x38c 0x000 0x5 0x0 -#define MX6Q_PAD_RGMII_RD2__HSI_TX_DATA 0x07c 0x390 0x000 0x0 0x0 -#define MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x07c 0x390 0x850 0x1 0x0 -#define MX6Q_PAD_RGMII_RD2__GPIO6_IO28 0x07c 0x390 0x000 0x5 0x0 -#define MX6Q_PAD_RGMII_RD3__HSI_TX_WAKE 0x080 0x394 0x000 0x0 0x0 -#define MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x080 0x394 0x854 0x1 0x0 -#define MX6Q_PAD_RGMII_RD3__GPIO6_IO29 0x080 0x394 0x000 0x5 0x0 -#define MX6Q_PAD_RGMII_RXC__USB_H3_STROBE 0x084 0x398 0x000 0x0 0x0 -#define MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x084 0x398 0x844 0x1 0x0 -#define MX6Q_PAD_RGMII_RXC__GPIO6_IO30 0x084 0x398 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_A25__EIM_ADDR25 0x088 0x39c 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_A25__ECSPI4_SS1 0x088 0x39c 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_A25__ECSPI2_RDY 0x088 0x39c 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12 0x088 0x39c 0x000 0x3 0x0 -#define MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS 0x088 0x39c 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_A25__GPIO5_IO02 0x088 0x39c 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x088 0x39c 0x88c 0x6 0x0 -#define MX6Q_PAD_EIM_EB2__EIM_EB2_B 0x08c 0x3a0 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_EB2__ECSPI1_SS0 0x08c 0x3a0 0x800 0x1 0x0 -#define MX6Q_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x08c 0x3a0 0x8d4 0x3 0x0 -#define MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x08c 0x3a0 0x890 0x4 0x0 -#define MX6Q_PAD_EIM_EB2__GPIO2_IO30 0x08c 0x3a0 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_EB2__I2C2_SCL 0x08c 0x3a0 0x8a0 0x6 0x0 -#define MX6Q_PAD_EIM_EB2__SRC_BOOT_CFG30 0x08c 0x3a0 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_D16__EIM_DATA16 0x090 0x3a4 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D16__ECSPI1_SCLK 0x090 0x3a4 0x7f4 0x1 0x0 -#define MX6Q_PAD_EIM_D16__IPU1_DI0_PIN05 0x090 0x3a4 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D16__IPU2_CSI1_DATA18 0x090 0x3a4 0x8d0 0x3 0x0 -#define MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x090 0x3a4 0x894 0x4 0x0 -#define MX6Q_PAD_EIM_D16__GPIO3_IO16 0x090 0x3a4 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D16__I2C2_SDA 0x090 0x3a4 0x8a4 0x6 0x0 -#define MX6Q_PAD_EIM_D17__EIM_DATA17 0x094 0x3a8 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D17__ECSPI1_MISO 0x094 0x3a8 0x7f8 0x1 0x0 -#define MX6Q_PAD_EIM_D17__IPU1_DI0_PIN06 0x094 0x3a8 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK 0x094 0x3a8 0x8e0 0x3 0x0 -#define MX6Q_PAD_EIM_D17__DCIC1_OUT 0x094 0x3a8 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_D17__GPIO3_IO17 0x094 0x3a8 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D17__I2C3_SCL 0x094 0x3a8 0x8a8 0x6 0x0 -#define MX6Q_PAD_EIM_D18__EIM_DATA18 0x098 0x3ac 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D18__ECSPI1_MOSI 0x098 0x3ac 0x7fc 0x1 0x0 -#define MX6Q_PAD_EIM_D18__IPU1_DI0_PIN07 0x098 0x3ac 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D18__IPU2_CSI1_DATA17 0x098 0x3ac 0x8cc 0x3 0x0 -#define MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS 0x098 0x3ac 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_D18__GPIO3_IO18 0x098 0x3ac 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D18__I2C3_SDA 0x098 0x3ac 0x8ac 0x6 0x0 -#define MX6Q_PAD_EIM_D19__EIM_DATA19 0x09c 0x3b0 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D19__ECSPI1_SS1 0x09c 0x3b0 0x804 0x1 0x0 -#define MX6Q_PAD_EIM_D19__IPU1_DI0_PIN08 0x09c 0x3b0 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D19__IPU2_CSI1_DATA16 0x09c 0x3b0 0x8c8 0x3 0x0 -#define MX6Q_PAD_EIM_D19__UART1_CTS_B 0x09c 0x3b0 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_D19__UART1_RTS_B 0x09c 0x3b0 0x91c 0x4 0x0 -#define MX6Q_PAD_EIM_D19__GPIO3_IO19 0x09c 0x3b0 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D19__EPIT1_OUT 0x09c 0x3b0 0x000 0x6 0x0 -#define MX6Q_PAD_EIM_D20__EIM_DATA20 0x0a0 0x3b4 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D20__ECSPI4_SS0 0x0a0 0x3b4 0x824 0x1 0x0 -#define MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16 0x0a0 0x3b4 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D20__IPU2_CSI1_DATA15 0x0a0 0x3b4 0x8c4 0x3 0x0 -#define MX6Q_PAD_EIM_D20__UART1_RTS_B 0x0a0 0x3b4 0x91c 0x4 0x1 -#define MX6Q_PAD_EIM_D20__UART1_CTS_B 0x0a0 0x3b4 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_D20__GPIO3_IO20 0x0a0 0x3b4 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D20__EPIT2_OUT 0x0a0 0x3b4 0x000 0x6 0x0 -#define MX6Q_PAD_EIM_D21__EIM_DATA21 0x0a4 0x3b8 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D21__ECSPI4_SCLK 0x0a4 0x3b8 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17 0x0a4 0x3b8 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D21__IPU2_CSI1_DATA11 0x0a4 0x3b8 0x8b4 0x3 0x0 -#define MX6Q_PAD_EIM_D21__USB_OTG_OC 0x0a4 0x3b8 0x944 0x4 0x0 -#define MX6Q_PAD_EIM_D21__GPIO3_IO21 0x0a4 0x3b8 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D21__I2C1_SCL 0x0a4 0x3b8 0x898 0x6 0x0 -#define MX6Q_PAD_EIM_D21__SPDIF_IN 0x0a4 0x3b8 0x914 0x7 0x0 -#define MX6Q_PAD_EIM_D22__EIM_DATA22 0x0a8 0x3bc 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D22__ECSPI4_MISO 0x0a8 0x3bc 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_D22__IPU1_DI0_PIN01 0x0a8 0x3bc 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D22__IPU2_CSI1_DATA10 0x0a8 0x3bc 0x8b0 0x3 0x0 -#define MX6Q_PAD_EIM_D22__USB_OTG_PWR 0x0a8 0x3bc 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_D22__GPIO3_IO22 0x0a8 0x3bc 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D22__SPDIF_OUT 0x0a8 0x3bc 0x000 0x6 0x0 -#define MX6Q_PAD_EIM_D23__EIM_DATA23 0x0ac 0x3c0 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS 0x0ac 0x3c0 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_D23__UART3_CTS_B 0x0ac 0x3c0 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D23__UART3_RTS_B 0x0ac 0x3c0 0x92c 0x2 0x0 -#define MX6Q_PAD_EIM_D23__UART1_DCD_B 0x0ac 0x3c0 0x000 0x3 0x0 -#define MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN 0x0ac 0x3c0 0x8d8 0x4 0x0 -#define MX6Q_PAD_EIM_D23__GPIO3_IO23 0x0ac 0x3c0 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D23__IPU1_DI1_PIN02 0x0ac 0x3c0 0x000 0x6 0x0 -#define MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14 0x0ac 0x3c0 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_EB3__EIM_EB3_B 0x0b0 0x3c4 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_EB3__ECSPI4_RDY 0x0b0 0x3c4 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_EB3__UART3_RTS_B 0x0b0 0x3c4 0x92c 0x2 0x1 -#define MX6Q_PAD_EIM_EB3__UART3_CTS_B 0x0b0 0x3c4 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_EB3__UART1_RI_B 0x0b0 0x3c4 0x000 0x3 0x0 -#define MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x0b0 0x3c4 0x8dc 0x4 0x0 -#define MX6Q_PAD_EIM_EB3__GPIO2_IO31 0x0b0 0x3c4 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN03 0x0b0 0x3c4 0x000 0x6 0x0 -#define MX6Q_PAD_EIM_EB3__SRC_BOOT_CFG31 0x0b0 0x3c4 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_D24__EIM_DATA24 0x0b4 0x3c8 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D24__ECSPI4_SS2 0x0b4 0x3c8 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_D24__UART3_TX_DATA 0x0b4 0x3c8 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D24__UART3_RX_DATA 0x0b4 0x3c8 0x930 0x2 0x0 -#define MX6Q_PAD_EIM_D24__ECSPI1_SS2 0x0b4 0x3c8 0x808 0x3 0x0 -#define MX6Q_PAD_EIM_D24__ECSPI2_SS2 0x0b4 0x3c8 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_D24__GPIO3_IO24 0x0b4 0x3c8 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D24__AUD5_RXFS 0x0b4 0x3c8 0x7d8 0x6 0x0 -#define MX6Q_PAD_EIM_D24__UART1_DTR_B 0x0b4 0x3c8 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_D25__EIM_DATA25 0x0b8 0x3cc 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D25__ECSPI4_SS3 0x0b8 0x3cc 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_D25__UART3_RX_DATA 0x0b8 0x3cc 0x930 0x2 0x1 -#define MX6Q_PAD_EIM_D25__UART3_TX_DATA 0x0b8 0x3cc 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D25__ECSPI1_SS3 0x0b8 0x3cc 0x80c 0x3 0x0 -#define MX6Q_PAD_EIM_D25__ECSPI2_SS3 0x0b8 0x3cc 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_D25__GPIO3_IO25 0x0b8 0x3cc 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D25__AUD5_RXC 0x0b8 0x3cc 0x7d4 0x6 0x0 -#define MX6Q_PAD_EIM_D25__UART1_DSR_B 0x0b8 0x3cc 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_D26__EIM_DATA26 0x0bc 0x3d0 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11 0x0bc 0x3d0 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_D26__IPU1_CSI0_DATA01 0x0bc 0x3d0 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D26__IPU2_CSI1_DATA14 0x0bc 0x3d0 0x8c0 0x3 0x0 -#define MX6Q_PAD_EIM_D26__UART2_TX_DATA 0x0bc 0x3d0 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_D26__UART2_RX_DATA 0x0bc 0x3d0 0x928 0x4 0x0 -#define MX6Q_PAD_EIM_D26__GPIO3_IO26 0x0bc 0x3d0 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D26__IPU1_SISG2 0x0bc 0x3d0 0x000 0x6 0x0 -#define MX6Q_PAD_EIM_D26__IPU1_DISP1_DATA22 0x0bc 0x3d0 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_D27__EIM_DATA27 0x0c0 0x3d4 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13 0x0c0 0x3d4 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_D27__IPU1_CSI0_DATA00 0x0c0 0x3d4 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D27__IPU2_CSI1_DATA13 0x0c0 0x3d4 0x8bc 0x3 0x0 -#define MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x0c0 0x3d4 0x928 0x4 0x1 -#define MX6Q_PAD_EIM_D27__UART2_TX_DATA 0x0c0 0x3d4 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_D27__GPIO3_IO27 0x0c0 0x3d4 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D27__IPU1_SISG3 0x0c0 0x3d4 0x000 0x6 0x0 -#define MX6Q_PAD_EIM_D27__IPU1_DISP1_DATA23 0x0c0 0x3d4 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_D28__EIM_DATA28 0x0c4 0x3d8 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D28__I2C1_SDA 0x0c4 0x3d8 0x89c 0x1 0x0 -#define MX6Q_PAD_EIM_D28__ECSPI4_MOSI 0x0c4 0x3d8 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D28__IPU2_CSI1_DATA12 0x0c4 0x3d8 0x8b8 0x3 0x0 -#define MX6Q_PAD_EIM_D28__UART2_CTS_B 0x0c4 0x3d8 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_D28__UART2_RTS_B 0x0c4 0x3d8 0x924 0x4 0x0 -#define MX6Q_PAD_EIM_D28__GPIO3_IO28 0x0c4 0x3d8 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG 0x0c4 0x3d8 0x000 0x6 0x0 -#define MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13 0x0c4 0x3d8 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_D29__EIM_DATA29 0x0c8 0x3dc 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15 0x0c8 0x3dc 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_D29__ECSPI4_SS0 0x0c8 0x3dc 0x824 0x2 0x1 -#define MX6Q_PAD_EIM_D29__UART2_RTS_B 0x0c8 0x3dc 0x924 0x4 0x1 -#define MX6Q_PAD_EIM_D29__UART2_CTS_B 0x0c8 0x3dc 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_D29__GPIO3_IO29 0x0c8 0x3dc 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x0c8 0x3dc 0x8e4 0x6 0x0 -#define MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14 0x0c8 0x3dc 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_D30__EIM_DATA30 0x0cc 0x3e0 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D30__IPU1_DISP1_DATA21 0x0cc 0x3e0 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11 0x0cc 0x3e0 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D30__IPU1_CSI0_DATA03 0x0cc 0x3e0 0x000 0x3 0x0 -#define MX6Q_PAD_EIM_D30__UART3_CTS_B 0x0cc 0x3e0 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_D30__UART3_RTS_B 0x0cc 0x3e0 0x92c 0x4 0x2 -#define MX6Q_PAD_EIM_D30__GPIO3_IO30 0x0cc 0x3e0 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D30__USB_H1_OC 0x0cc 0x3e0 0x948 0x6 0x0 -#define MX6Q_PAD_EIM_D31__EIM_DATA31 0x0d0 0x3e4 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_D31__IPU1_DISP1_DATA20 0x0d0 0x3e4 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12 0x0d0 0x3e4 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_D31__IPU1_CSI0_DATA02 0x0d0 0x3e4 0x000 0x3 0x0 -#define MX6Q_PAD_EIM_D31__UART3_RTS_B 0x0d0 0x3e4 0x92c 0x4 0x3 -#define MX6Q_PAD_EIM_D31__UART3_CTS_B 0x0d0 0x3e4 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_D31__GPIO3_IO31 0x0d0 0x3e4 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_D31__USB_H1_PWR 0x0d0 0x3e4 0x000 0x6 0x0 -#define MX6Q_PAD_EIM_A24__EIM_ADDR24 0x0d4 0x3e8 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_A24__IPU1_DISP1_DATA19 0x0d4 0x3e8 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_A24__IPU2_CSI1_DATA19 0x0d4 0x3e8 0x8d4 0x2 0x1 -#define MX6Q_PAD_EIM_A24__IPU2_SISG2 0x0d4 0x3e8 0x000 0x3 0x0 -#define MX6Q_PAD_EIM_A24__IPU1_SISG2 0x0d4 0x3e8 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_A24__GPIO5_IO04 0x0d4 0x3e8 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_A24__SRC_BOOT_CFG24 0x0d4 0x3e8 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_A23__EIM_ADDR23 0x0d8 0x3ec 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_A23__IPU1_DISP1_DATA18 0x0d8 0x3ec 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_A23__IPU2_CSI1_DATA18 0x0d8 0x3ec 0x8d0 0x2 0x1 -#define MX6Q_PAD_EIM_A23__IPU2_SISG3 0x0d8 0x3ec 0x000 0x3 0x0 -#define MX6Q_PAD_EIM_A23__IPU1_SISG3 0x0d8 0x3ec 0x000 0x4 0x0 -#define MX6Q_PAD_EIM_A23__GPIO6_IO06 0x0d8 0x3ec 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_A23__SRC_BOOT_CFG23 0x0d8 0x3ec 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_A22__EIM_ADDR22 0x0dc 0x3f0 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_A22__IPU1_DISP1_DATA17 0x0dc 0x3f0 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_A22__IPU2_CSI1_DATA17 0x0dc 0x3f0 0x8cc 0x2 0x1 -#define MX6Q_PAD_EIM_A22__GPIO2_IO16 0x0dc 0x3f0 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_A22__SRC_BOOT_CFG22 0x0dc 0x3f0 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_A21__EIM_ADDR21 0x0e0 0x3f4 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_A21__IPU1_DISP1_DATA16 0x0e0 0x3f4 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_A21__IPU2_CSI1_DATA16 0x0e0 0x3f4 0x8c8 0x2 0x1 -#define MX6Q_PAD_EIM_A21__GPIO2_IO17 0x0e0 0x3f4 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_A21__SRC_BOOT_CFG21 0x0e0 0x3f4 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_A20__EIM_ADDR20 0x0e4 0x3f8 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_A20__IPU1_DISP1_DATA15 0x0e4 0x3f8 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_A20__IPU2_CSI1_DATA15 0x0e4 0x3f8 0x8c4 0x2 0x1 -#define MX6Q_PAD_EIM_A20__GPIO2_IO18 0x0e4 0x3f8 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_A20__SRC_BOOT_CFG20 0x0e4 0x3f8 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_A19__EIM_ADDR19 0x0e8 0x3fc 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_A19__IPU1_DISP1_DATA14 0x0e8 0x3fc 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_A19__IPU2_CSI1_DATA14 0x0e8 0x3fc 0x8c0 0x2 0x1 -#define MX6Q_PAD_EIM_A19__GPIO2_IO19 0x0e8 0x3fc 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_A19__SRC_BOOT_CFG19 0x0e8 0x3fc 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_A18__EIM_ADDR18 0x0ec 0x400 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_A18__IPU1_DISP1_DATA13 0x0ec 0x400 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_A18__IPU2_CSI1_DATA13 0x0ec 0x400 0x8bc 0x2 0x1 -#define MX6Q_PAD_EIM_A18__GPIO2_IO20 0x0ec 0x400 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_A18__SRC_BOOT_CFG18 0x0ec 0x400 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_A17__EIM_ADDR17 0x0f0 0x404 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_A17__IPU1_DISP1_DATA12 0x0f0 0x404 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_A17__IPU2_CSI1_DATA12 0x0f0 0x404 0x8b8 0x2 0x1 -#define MX6Q_PAD_EIM_A17__GPIO2_IO21 0x0f0 0x404 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_A17__SRC_BOOT_CFG17 0x0f0 0x404 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_A16__EIM_ADDR16 0x0f4 0x408 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x0f4 0x408 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x0f4 0x408 0x8e0 0x2 0x1 -#define MX6Q_PAD_EIM_A16__GPIO2_IO22 0x0f4 0x408 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_A16__SRC_BOOT_CFG16 0x0f4 0x408 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_CS0__EIM_CS0_B 0x0f8 0x40c 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN05 0x0f8 0x40c 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_CS0__ECSPI2_SCLK 0x0f8 0x40c 0x810 0x2 0x0 -#define MX6Q_PAD_EIM_CS0__GPIO2_IO23 0x0f8 0x40c 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_CS1__EIM_CS1_B 0x0fc 0x410 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN06 0x0fc 0x410 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_CS1__ECSPI2_MOSI 0x0fc 0x410 0x818 0x2 0x0 -#define MX6Q_PAD_EIM_CS1__GPIO2_IO24 0x0fc 0x410 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_OE__EIM_OE_B 0x100 0x414 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_OE__IPU1_DI1_PIN07 0x100 0x414 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_OE__ECSPI2_MISO 0x100 0x414 0x814 0x2 0x0 -#define MX6Q_PAD_EIM_OE__GPIO2_IO25 0x100 0x414 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_RW__EIM_RW 0x104 0x418 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_RW__IPU1_DI1_PIN08 0x104 0x418 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_RW__ECSPI2_SS0 0x104 0x418 0x81c 0x2 0x0 -#define MX6Q_PAD_EIM_RW__GPIO2_IO26 0x104 0x418 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_RW__SRC_BOOT_CFG29 0x104 0x418 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_LBA__EIM_LBA_B 0x108 0x41c 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17 0x108 0x41c 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_LBA__ECSPI2_SS1 0x108 0x41c 0x820 0x2 0x0 -#define MX6Q_PAD_EIM_LBA__GPIO2_IO27 0x108 0x41c 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_LBA__SRC_BOOT_CFG26 0x108 0x41c 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_EB0__EIM_EB0_B 0x10c 0x420 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x10c 0x420 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_EB0__IPU2_CSI1_DATA11 0x10c 0x420 0x8b4 0x2 0x1 -#define MX6Q_PAD_EIM_EB0__CCM_PMIC_READY 0x10c 0x420 0x7f0 0x4 0x0 -#define MX6Q_PAD_EIM_EB0__GPIO2_IO28 0x10c 0x420 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_EB0__SRC_BOOT_CFG27 0x10c 0x420 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_EB1__EIM_EB1_B 0x110 0x424 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x110 0x424 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_EB1__IPU2_CSI1_DATA10 0x110 0x424 0x8b0 0x2 0x1 -#define MX6Q_PAD_EIM_EB1__GPIO2_IO29 0x110 0x424 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_EB1__SRC_BOOT_CFG28 0x110 0x424 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA0__EIM_AD00 0x114 0x428 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x114 0x428 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA0__IPU2_CSI1_DATA09 0x114 0x428 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_DA0__GPIO3_IO00 0x114 0x428 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA0__SRC_BOOT_CFG00 0x114 0x428 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA1__EIM_AD01 0x118 0x42c 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x118 0x42c 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA1__IPU2_CSI1_DATA08 0x118 0x42c 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_DA1__GPIO3_IO01 0x118 0x42c 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA1__SRC_BOOT_CFG01 0x118 0x42c 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA2__EIM_AD02 0x11c 0x430 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x11c 0x430 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA2__IPU2_CSI1_DATA07 0x11c 0x430 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_DA2__GPIO3_IO02 0x11c 0x430 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA2__SRC_BOOT_CFG02 0x11c 0x430 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA3__EIM_AD03 0x120 0x434 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x120 0x434 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA3__IPU2_CSI1_DATA06 0x120 0x434 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_DA3__GPIO3_IO03 0x120 0x434 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA3__SRC_BOOT_CFG03 0x120 0x434 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA4__EIM_AD04 0x124 0x438 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x124 0x438 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA4__IPU2_CSI1_DATA05 0x124 0x438 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_DA4__GPIO3_IO04 0x124 0x438 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA4__SRC_BOOT_CFG04 0x124 0x438 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA5__EIM_AD05 0x128 0x43c 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x128 0x43c 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA5__IPU2_CSI1_DATA04 0x128 0x43c 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_DA5__GPIO3_IO05 0x128 0x43c 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA5__SRC_BOOT_CFG05 0x128 0x43c 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA6__EIM_AD06 0x12c 0x440 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x12c 0x440 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA6__IPU2_CSI1_DATA03 0x12c 0x440 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_DA6__GPIO3_IO06 0x12c 0x440 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA6__SRC_BOOT_CFG06 0x12c 0x440 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA7__EIM_AD07 0x130 0x444 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x130 0x444 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA7__IPU2_CSI1_DATA02 0x130 0x444 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_DA7__GPIO3_IO07 0x130 0x444 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA7__SRC_BOOT_CFG07 0x130 0x444 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA8__EIM_AD08 0x134 0x448 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x134 0x448 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA8__IPU2_CSI1_DATA01 0x134 0x448 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_DA8__GPIO3_IO08 0x134 0x448 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA8__SRC_BOOT_CFG08 0x134 0x448 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA9__EIM_AD09 0x138 0x44c 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x138 0x44c 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA9__IPU2_CSI1_DATA00 0x138 0x44c 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_DA9__GPIO3_IO09 0x138 0x44c 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA9__SRC_BOOT_CFG09 0x138 0x44c 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA10__EIM_AD10 0x13c 0x450 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15 0x13c 0x450 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN 0x13c 0x450 0x8d8 0x2 0x1 -#define MX6Q_PAD_EIM_DA10__GPIO3_IO10 0x13c 0x450 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA10__SRC_BOOT_CFG10 0x13c 0x450 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA11__EIM_AD11 0x140 0x454 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN02 0x140 0x454 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC 0x140 0x454 0x8dc 0x2 0x1 -#define MX6Q_PAD_EIM_DA11__GPIO3_IO11 0x140 0x454 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA11__SRC_BOOT_CFG11 0x140 0x454 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA12__EIM_AD12 0x144 0x458 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN03 0x144 0x458 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC 0x144 0x458 0x8e4 0x2 0x1 -#define MX6Q_PAD_EIM_DA12__GPIO3_IO12 0x144 0x458 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA12__SRC_BOOT_CFG12 0x144 0x458 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA13__EIM_AD13 0x148 0x45c 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x148 0x45c 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA13__GPIO3_IO13 0x148 0x45c 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA13__SRC_BOOT_CFG13 0x148 0x45c 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA14__EIM_AD14 0x14c 0x460 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x14c 0x460 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA14__GPIO3_IO14 0x14c 0x460 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA14__SRC_BOOT_CFG14 0x14c 0x460 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_DA15__EIM_AD15 0x150 0x464 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN01 0x150 0x464 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN04 0x150 0x464 0x000 0x2 0x0 -#define MX6Q_PAD_EIM_DA15__GPIO3_IO15 0x150 0x464 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_DA15__SRC_BOOT_CFG15 0x150 0x464 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_WAIT__EIM_WAIT_B 0x154 0x468 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_WAIT__EIM_DTACK_B 0x154 0x468 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_WAIT__GPIO5_IO00 0x154 0x468 0x000 0x5 0x0 -#define MX6Q_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x154 0x468 0x000 0x7 0x0 -#define MX6Q_PAD_EIM_BCLK__EIM_BCLK 0x158 0x46c 0x000 0x0 0x0 -#define MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x158 0x46c 0x000 0x1 0x0 -#define MX6Q_PAD_EIM_BCLK__GPIO6_IO31 0x158 0x46c 0x000 0x5 0x0 -#define MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x15c 0x470 0x000 0x0 0x0 -#define MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x15c 0x470 0x000 0x1 0x0 -#define MX6Q_PAD_DI0_DISP_CLK__GPIO4_IO16 0x15c 0x470 0x000 0x5 0x0 -#define MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x160 0x474 0x000 0x0 0x0 -#define MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x160 0x474 0x000 0x1 0x0 -#define MX6Q_PAD_DI0_PIN15__AUD6_TXC 0x160 0x474 0x000 0x2 0x0 -#define MX6Q_PAD_DI0_PIN15__GPIO4_IO17 0x160 0x474 0x000 0x5 0x0 -#define MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x164 0x478 0x000 0x0 0x0 -#define MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x164 0x478 0x000 0x1 0x0 -#define MX6Q_PAD_DI0_PIN2__AUD6_TXD 0x164 0x478 0x000 0x2 0x0 -#define MX6Q_PAD_DI0_PIN2__GPIO4_IO18 0x164 0x478 0x000 0x5 0x0 -#define MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x168 0x47c 0x000 0x0 0x0 -#define MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x168 0x47c 0x000 0x1 0x0 -#define MX6Q_PAD_DI0_PIN3__AUD6_TXFS 0x168 0x47c 0x000 0x2 0x0 -#define MX6Q_PAD_DI0_PIN3__GPIO4_IO19 0x168 0x47c 0x000 0x5 0x0 -#define MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x16c 0x480 0x000 0x0 0x0 -#define MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x16c 0x480 0x000 0x1 0x0 -#define MX6Q_PAD_DI0_PIN4__AUD6_RXD 0x16c 0x480 0x000 0x2 0x0 -#define MX6Q_PAD_DI0_PIN4__SD1_WP 0x16c 0x480 0x94c 0x3 0x0 -#define MX6Q_PAD_DI0_PIN4__GPIO4_IO20 0x16c 0x480 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x170 0x484 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x170 0x484 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK 0x170 0x484 0x000 0x2 0x0 -#define MX6Q_PAD_DISP0_DAT0__GPIO4_IO21 0x170 0x484 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x174 0x488 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x174 0x488 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI 0x174 0x488 0x000 0x2 0x0 -#define MX6Q_PAD_DISP0_DAT1__GPIO4_IO22 0x174 0x488 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x178 0x48c 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x178 0x48c 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO 0x178 0x48c 0x000 0x2 0x0 -#define MX6Q_PAD_DISP0_DAT2__GPIO4_IO23 0x178 0x48c 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x17c 0x490 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x17c 0x490 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0 0x17c 0x490 0x000 0x2 0x0 -#define MX6Q_PAD_DISP0_DAT3__GPIO4_IO24 0x17c 0x490 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x180 0x494 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x180 0x494 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1 0x180 0x494 0x000 0x2 0x0 -#define MX6Q_PAD_DISP0_DAT4__GPIO4_IO25 0x180 0x494 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x184 0x498 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x184 0x498 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2 0x184 0x498 0x000 0x2 0x0 -#define MX6Q_PAD_DISP0_DAT5__AUD6_RXFS 0x184 0x498 0x000 0x3 0x0 -#define MX6Q_PAD_DISP0_DAT5__GPIO4_IO26 0x184 0x498 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x188 0x49c 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x188 0x49c 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3 0x188 0x49c 0x000 0x2 0x0 -#define MX6Q_PAD_DISP0_DAT6__AUD6_RXC 0x188 0x49c 0x000 0x3 0x0 -#define MX6Q_PAD_DISP0_DAT6__GPIO4_IO27 0x188 0x49c 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x18c 0x4a0 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x18c 0x4a0 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY 0x18c 0x4a0 0x000 0x2 0x0 -#define MX6Q_PAD_DISP0_DAT7__GPIO4_IO28 0x18c 0x4a0 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x190 0x4a4 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x190 0x4a4 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT8__PWM1_OUT 0x190 0x4a4 0x000 0x2 0x0 -#define MX6Q_PAD_DISP0_DAT8__WDOG1_B 0x190 0x4a4 0x000 0x3 0x0 -#define MX6Q_PAD_DISP0_DAT8__GPIO4_IO29 0x190 0x4a4 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x194 0x4a8 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x194 0x4a8 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT9__PWM2_OUT 0x194 0x4a8 0x000 0x2 0x0 -#define MX6Q_PAD_DISP0_DAT9__WDOG2_B 0x194 0x4a8 0x000 0x3 0x0 -#define MX6Q_PAD_DISP0_DAT9__GPIO4_IO30 0x194 0x4a8 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x198 0x4ac 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x198 0x4ac 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT10__GPIO4_IO31 0x198 0x4ac 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x19c 0x4b0 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x19c 0x4b0 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT11__GPIO5_IO05 0x19c 0x4b0 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x1a0 0x4b4 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x1a0 0x4b4 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT12__GPIO5_IO06 0x1a0 0x4b4 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x1a4 0x4b8 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x1a4 0x4b8 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT13__AUD5_RXFS 0x1a4 0x4b8 0x7d8 0x3 0x1 -#define MX6Q_PAD_DISP0_DAT13__GPIO5_IO07 0x1a4 0x4b8 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x1a8 0x4bc 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x1a8 0x4bc 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT14__AUD5_RXC 0x1a8 0x4bc 0x7d4 0x3 0x1 -#define MX6Q_PAD_DISP0_DAT14__GPIO5_IO08 0x1a8 0x4bc 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x1ac 0x4c0 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x1ac 0x4c0 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1 0x1ac 0x4c0 0x804 0x2 0x1 -#define MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1 0x1ac 0x4c0 0x820 0x3 0x1 -#define MX6Q_PAD_DISP0_DAT15__GPIO5_IO09 0x1ac 0x4c0 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x1b0 0x4c4 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x1b0 0x4c4 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI 0x1b0 0x4c4 0x818 0x2 0x1 -#define MX6Q_PAD_DISP0_DAT16__AUD5_TXC 0x1b0 0x4c4 0x7dc 0x3 0x0 -#define MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x1b0 0x4c4 0x90c 0x4 0x0 -#define MX6Q_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0 0x4c4 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x1b4 0x4c8 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x1b4 0x4c8 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO 0x1b4 0x4c8 0x814 0x2 0x1 -#define MX6Q_PAD_DISP0_DAT17__AUD5_TXD 0x1b4 0x4c8 0x7d0 0x3 0x0 -#define MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x1b4 0x4c8 0x910 0x4 0x0 -#define MX6Q_PAD_DISP0_DAT17__GPIO5_IO11 0x1b4 0x4c8 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x1b8 0x4cc 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x1b8 0x4cc 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0 0x1b8 0x4cc 0x81c 0x2 0x1 -#define MX6Q_PAD_DISP0_DAT18__AUD5_TXFS 0x1b8 0x4cc 0x7e0 0x3 0x0 -#define MX6Q_PAD_DISP0_DAT18__AUD4_RXFS 0x1b8 0x4cc 0x7c0 0x4 0x0 -#define MX6Q_PAD_DISP0_DAT18__GPIO5_IO12 0x1b8 0x4cc 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT18__EIM_CS2_B 0x1b8 0x4cc 0x000 0x7 0x0 -#define MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x1bc 0x4d0 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x1bc 0x4d0 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK 0x1bc 0x4d0 0x810 0x2 0x1 -#define MX6Q_PAD_DISP0_DAT19__AUD5_RXD 0x1bc 0x4d0 0x7cc 0x3 0x0 -#define MX6Q_PAD_DISP0_DAT19__AUD4_RXC 0x1bc 0x4d0 0x7bc 0x4 0x0 -#define MX6Q_PAD_DISP0_DAT19__GPIO5_IO13 0x1bc 0x4d0 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT19__EIM_CS3_B 0x1bc 0x4d0 0x000 0x7 0x0 -#define MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x1c0 0x4d4 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x1c0 0x4d4 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK 0x1c0 0x4d4 0x7f4 0x2 0x1 -#define MX6Q_PAD_DISP0_DAT20__AUD4_TXC 0x1c0 0x4d4 0x7c4 0x3 0x0 -#define MX6Q_PAD_DISP0_DAT20__GPIO5_IO14 0x1c0 0x4d4 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x1c4 0x4d8 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x1c4 0x4d8 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI 0x1c4 0x4d8 0x7fc 0x2 0x1 -#define MX6Q_PAD_DISP0_DAT21__AUD4_TXD 0x1c4 0x4d8 0x7b8 0x3 0x1 -#define MX6Q_PAD_DISP0_DAT21__GPIO5_IO15 0x1c4 0x4d8 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x1c8 0x4dc 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x1c8 0x4dc 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO 0x1c8 0x4dc 0x7f8 0x2 0x1 -#define MX6Q_PAD_DISP0_DAT22__AUD4_TXFS 0x1c8 0x4dc 0x7c8 0x3 0x1 -#define MX6Q_PAD_DISP0_DAT22__GPIO5_IO16 0x1c8 0x4dc 0x000 0x5 0x0 -#define MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x1cc 0x4e0 0x000 0x0 0x0 -#define MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x1cc 0x4e0 0x000 0x1 0x0 -#define MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0 0x1cc 0x4e0 0x800 0x2 0x1 -#define MX6Q_PAD_DISP0_DAT23__AUD4_RXD 0x1cc 0x4e0 0x7b4 0x3 0x1 -#define MX6Q_PAD_DISP0_DAT23__GPIO5_IO17 0x1cc 0x4e0 0x000 0x5 0x0 -#define MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1d0 0x4e4 0x840 0x1 0x0 -#define MX6Q_PAD_ENET_MDIO__ESAI_RX_CLK 0x1d0 0x4e4 0x86c 0x2 0x0 -#define MX6Q_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1d0 0x4e4 0x000 0x4 0x0 -#define MX6Q_PAD_ENET_MDIO__GPIO1_IO22 0x1d0 0x4e4 0x000 0x5 0x0 -#define MX6Q_PAD_ENET_MDIO__SPDIF_LOCK 0x1d0 0x4e4 0x000 0x6 0x0 -#define MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1d4 0x4e8 0x000 0x1 0x0 -#define MX6Q_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1d4 0x4e8 0x85c 0x2 0x0 -#define MX6Q_PAD_ENET_REF_CLK__GPIO1_IO23 0x1d4 0x4e8 0x000 0x5 0x0 -#define MX6Q_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1d4 0x4e8 0x000 0x6 0x0 -#define MX6Q_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x000 0x0 0x0 -#define MX6Q_PAD_ENET_RX_ER__ENET_RX_ER 0x1d8 0x4ec 0x000 0x1 0x0 -#define MX6Q_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1d8 0x4ec 0x864 0x2 0x0 -#define MX6Q_PAD_ENET_RX_ER__SPDIF_IN 0x1d8 0x4ec 0x914 0x3 0x1 -#define MX6Q_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0 -#define MX6Q_PAD_ENET_RX_ER__GPIO1_IO24 0x1d8 0x4ec 0x000 0x5 0x0 -#define MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN 0x1dc 0x4f0 0x858 0x1 0x1 -#define MX6Q_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1dc 0x4f0 0x870 0x2 0x0 -#define MX6Q_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1dc 0x4f0 0x918 0x3 0x1 -#define MX6Q_PAD_ENET_CRS_DV__GPIO1_IO25 0x1dc 0x4f0 0x000 0x5 0x0 -#define MX6Q_PAD_ENET_RXD1__MLB_SIG 0x1e0 0x4f4 0x908 0x0 0x0 -#define MX6Q_PAD_ENET_RXD1__ENET_RX_DATA1 0x1e0 0x4f4 0x84c 0x1 0x1 -#define MX6Q_PAD_ENET_RXD1__ESAI_TX_FS 0x1e0 0x4f4 0x860 0x2 0x0 -#define MX6Q_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1e0 0x4f4 0x000 0x4 0x0 -#define MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x1e0 0x4f4 0x000 0x5 0x0 -#define MX6Q_PAD_ENET_RXD0__ENET_RX_DATA0 0x1e4 0x4f8 0x848 0x1 0x1 -#define MX6Q_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1e4 0x4f8 0x868 0x2 0x0 -#define MX6Q_PAD_ENET_RXD0__SPDIF_OUT 0x1e4 0x4f8 0x000 0x3 0x0 -#define MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x1e4 0x4f8 0x000 0x5 0x0 -#define MX6Q_PAD_ENET_TX_EN__ENET_TX_EN 0x1e8 0x4fc 0x000 0x1 0x0 -#define MX6Q_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1e8 0x4fc 0x880 0x2 0x0 -#define MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x1e8 0x4fc 0x000 0x5 0x0 -#define MX6Q_PAD_ENET_TXD1__MLB_CLK 0x1ec 0x500 0x900 0x0 0x0 -#define MX6Q_PAD_ENET_TXD1__ENET_TX_DATA1 0x1ec 0x500 0x000 0x1 0x0 -#define MX6Q_PAD_ENET_TXD1__ESAI_TX2_RX3 0x1ec 0x500 0x87c 0x2 0x0 -#define MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x1ec 0x500 0x000 0x4 0x0 -#define MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x1ec 0x500 0x000 0x5 0x0 -#define MX6Q_PAD_ENET_TXD0__ENET_TX_DATA0 0x1f0 0x504 0x000 0x1 0x0 -#define MX6Q_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1f0 0x504 0x884 0x2 0x0 -#define MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x1f0 0x504 0x000 0x5 0x0 -#define MX6Q_PAD_ENET_MDC__MLB_DATA 0x1f4 0x508 0x904 0x0 0x0 -#define MX6Q_PAD_ENET_MDC__ENET_MDC 0x1f4 0x508 0x000 0x1 0x0 -#define MX6Q_PAD_ENET_MDC__ESAI_TX5_RX0 0x1f4 0x508 0x888 0x2 0x0 -#define MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1f4 0x508 0x000 0x4 0x0 -#define MX6Q_PAD_ENET_MDC__GPIO1_IO31 0x1f4 0x508 0x000 0x5 0x0 -#define MX6Q_PAD_KEY_COL0__ECSPI1_SCLK 0x1f8 0x5c8 0x7f4 0x0 0x2 -#define MX6Q_PAD_KEY_COL0__ENET_RX_DATA3 0x1f8 0x5c8 0x854 0x1 0x1 -#define MX6Q_PAD_KEY_COL0__AUD5_TXC 0x1f8 0x5c8 0x7dc 0x2 0x1 -#define MX6Q_PAD_KEY_COL0__KEY_COL0 0x1f8 0x5c8 0x000 0x3 0x0 -#define MX6Q_PAD_KEY_COL0__UART4_TX_DATA 0x1f8 0x5c8 0x000 0x4 0x0 -#define MX6Q_PAD_KEY_COL0__UART4_RX_DATA 0x1f8 0x5c8 0x938 0x4 0x0 -#define MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x1f8 0x5c8 0x000 0x5 0x0 -#define MX6Q_PAD_KEY_COL0__DCIC1_OUT 0x1f8 0x5c8 0x000 0x6 0x0 -#define MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI 0x1fc 0x5cc 0x7fc 0x0 0x2 -#define MX6Q_PAD_KEY_ROW0__ENET_TX_DATA3 0x1fc 0x5cc 0x000 0x1 0x0 -#define MX6Q_PAD_KEY_ROW0__AUD5_TXD 0x1fc 0x5cc 0x7d0 0x2 0x1 -#define MX6Q_PAD_KEY_ROW0__KEY_ROW0 0x1fc 0x5cc 0x000 0x3 0x0 -#define MX6Q_PAD_KEY_ROW0__UART4_RX_DATA 0x1fc 0x5cc 0x938 0x4 0x1 -#define MX6Q_PAD_KEY_ROW0__UART4_TX_DATA 0x1fc 0x5cc 0x000 0x4 0x0 -#define MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x1fc 0x5cc 0x000 0x5 0x0 -#define MX6Q_PAD_KEY_ROW0__DCIC2_OUT 0x1fc 0x5cc 0x000 0x6 0x0 -#define MX6Q_PAD_KEY_COL1__ECSPI1_MISO 0x200 0x5d0 0x7f8 0x0 0x2 -#define MX6Q_PAD_KEY_COL1__ENET_MDIO 0x200 0x5d0 0x840 0x1 0x1 -#define MX6Q_PAD_KEY_COL1__AUD5_TXFS 0x200 0x5d0 0x7e0 0x2 0x1 -#define MX6Q_PAD_KEY_COL1__KEY_COL1 0x200 0x5d0 0x000 0x3 0x0 -#define MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x200 0x5d0 0x000 0x4 0x0 -#define MX6Q_PAD_KEY_COL1__UART5_RX_DATA 0x200 0x5d0 0x940 0x4 0x0 -#define MX6Q_PAD_KEY_COL1__GPIO4_IO08 0x200 0x5d0 0x000 0x5 0x0 -#define MX6Q_PAD_KEY_COL1__SD1_VSELECT 0x200 0x5d0 0x000 0x6 0x0 -#define MX6Q_PAD_KEY_ROW1__ECSPI1_SS0 0x204 0x5d4 0x800 0x0 0x2 -#define MX6Q_PAD_KEY_ROW1__ENET_COL 0x204 0x5d4 0x000 0x1 0x0 -#define MX6Q_PAD_KEY_ROW1__AUD5_RXD 0x204 0x5d4 0x7cc 0x2 0x1 -#define MX6Q_PAD_KEY_ROW1__KEY_ROW1 0x204 0x5d4 0x000 0x3 0x0 -#define MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x204 0x5d4 0x940 0x4 0x1 -#define MX6Q_PAD_KEY_ROW1__UART5_TX_DATA 0x204 0x5d4 0x000 0x4 0x0 -#define MX6Q_PAD_KEY_ROW1__GPIO4_IO09 0x204 0x5d4 0x000 0x5 0x0 -#define MX6Q_PAD_KEY_ROW1__SD2_VSELECT 0x204 0x5d4 0x000 0x6 0x0 -#define MX6Q_PAD_KEY_COL2__ECSPI1_SS1 0x208 0x5d8 0x804 0x0 0x2 -#define MX6Q_PAD_KEY_COL2__ENET_RX_DATA2 0x208 0x5d8 0x850 0x1 0x1 -#define MX6Q_PAD_KEY_COL2__FLEXCAN1_TX 0x208 0x5d8 0x000 0x2 0x0 -#define MX6Q_PAD_KEY_COL2__KEY_COL2 0x208 0x5d8 0x000 0x3 0x0 -#define MX6Q_PAD_KEY_COL2__ENET_MDC 0x208 0x5d8 0x000 0x4 0x0 -#define MX6Q_PAD_KEY_COL2__GPIO4_IO10 0x208 0x5d8 0x000 0x5 0x0 -#define MX6Q_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x208 0x5d8 0x000 0x6 0x0 -#define MX6Q_PAD_KEY_ROW2__ECSPI1_SS2 0x20c 0x5dc 0x808 0x0 0x1 -#define MX6Q_PAD_KEY_ROW2__ENET_TX_DATA2 0x20c 0x5dc 0x000 0x1 0x0 -#define MX6Q_PAD_KEY_ROW2__FLEXCAN1_RX 0x20c 0x5dc 0x7e4 0x2 0x0 -#define MX6Q_PAD_KEY_ROW2__KEY_ROW2 0x20c 0x5dc 0x000 0x3 0x0 -#define MX6Q_PAD_KEY_ROW2__SD2_VSELECT 0x20c 0x5dc 0x000 0x4 0x0 -#define MX6Q_PAD_KEY_ROW2__GPIO4_IO11 0x20c 0x5dc 0x000 0x5 0x0 -#define MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x20c 0x5dc 0x88c 0x6 0x1 -#define MX6Q_PAD_KEY_COL3__ECSPI1_SS3 0x210 0x5e0 0x80c 0x0 0x1 -#define MX6Q_PAD_KEY_COL3__ENET_CRS 0x210 0x5e0 0x000 0x1 0x0 -#define MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x210 0x5e0 0x890 0x2 0x1 -#define MX6Q_PAD_KEY_COL3__KEY_COL3 0x210 0x5e0 0x000 0x3 0x0 -#define MX6Q_PAD_KEY_COL3__I2C2_SCL 0x210 0x5e0 0x8a0 0x4 0x1 -#define MX6Q_PAD_KEY_COL3__GPIO4_IO12 0x210 0x5e0 0x000 0x5 0x0 -#define MX6Q_PAD_KEY_COL3__SPDIF_IN 0x210 0x5e0 0x914 0x6 0x2 -#define MX6Q_PAD_KEY_ROW3__ASRC_EXT_CLK 0x214 0x5e4 0x7b0 0x1 0x0 -#define MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x214 0x5e4 0x894 0x2 0x1 -#define MX6Q_PAD_KEY_ROW3__KEY_ROW3 0x214 0x5e4 0x000 0x3 0x0 -#define MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x214 0x5e4 0x8a4 0x4 0x1 -#define MX6Q_PAD_KEY_ROW3__GPIO4_IO13 0x214 0x5e4 0x000 0x5 0x0 -#define MX6Q_PAD_KEY_ROW3__SD1_VSELECT 0x214 0x5e4 0x000 0x6 0x0 -#define MX6Q_PAD_KEY_COL4__FLEXCAN2_TX 0x218 0x5e8 0x000 0x0 0x0 -#define MX6Q_PAD_KEY_COL4__IPU1_SISG4 0x218 0x5e8 0x000 0x1 0x0 -#define MX6Q_PAD_KEY_COL4__USB_OTG_OC 0x218 0x5e8 0x944 0x2 0x1 -#define MX6Q_PAD_KEY_COL4__KEY_COL4 0x218 0x5e8 0x000 0x3 0x0 -#define MX6Q_PAD_KEY_COL4__UART5_RTS_B 0x218 0x5e8 0x93c 0x4 0x0 -#define MX6Q_PAD_KEY_COL4__UART5_CTS_B 0x218 0x5e8 0x000 0x4 0x0 -#define MX6Q_PAD_KEY_COL4__GPIO4_IO14 0x218 0x5e8 0x000 0x5 0x0 -#define MX6Q_PAD_KEY_ROW4__FLEXCAN2_RX 0x21c 0x5ec 0x7e8 0x0 0x0 -#define MX6Q_PAD_KEY_ROW4__IPU1_SISG5 0x21c 0x5ec 0x000 0x1 0x0 -#define MX6Q_PAD_KEY_ROW4__USB_OTG_PWR 0x21c 0x5ec 0x000 0x2 0x0 -#define MX6Q_PAD_KEY_ROW4__KEY_ROW4 0x21c 0x5ec 0x000 0x3 0x0 -#define MX6Q_PAD_KEY_ROW4__UART5_CTS_B 0x21c 0x5ec 0x000 0x4 0x0 -#define MX6Q_PAD_KEY_ROW4__UART5_RTS_B 0x21c 0x5ec 0x93c 0x4 0x1 -#define MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x21c 0x5ec 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_0__CCM_CLKO1 0x220 0x5f0 0x000 0x0 0x0 -#define MX6Q_PAD_GPIO_0__KEY_COL5 0x220 0x5f0 0x8e8 0x2 0x0 -#define MX6Q_PAD_GPIO_0__ASRC_EXT_CLK 0x220 0x5f0 0x7b0 0x3 0x1 -#define MX6Q_PAD_GPIO_0__EPIT1_OUT 0x220 0x5f0 0x000 0x4 0x0 -#define MX6Q_PAD_GPIO_0__GPIO1_IO00 0x220 0x5f0 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_0__USB_H1_PWR 0x220 0x5f0 0x000 0x6 0x0 -#define MX6Q_PAD_GPIO_0__SNVS_VIO_5 0x220 0x5f0 0x000 0x7 0x0 -#define MX6Q_PAD_GPIO_1__ESAI_RX_CLK 0x224 0x5f4 0x86c 0x0 0x1 -#define MX6Q_PAD_GPIO_1__WDOG2_B 0x224 0x5f4 0x000 0x1 0x0 -#define MX6Q_PAD_GPIO_1__KEY_ROW5 0x224 0x5f4 0x8f4 0x2 0x0 -#define MX6Q_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x000 0x3 0x0 -#define MX6Q_PAD_GPIO_1__PWM2_OUT 0x224 0x5f4 0x000 0x4 0x0 -#define MX6Q_PAD_GPIO_1__GPIO1_IO01 0x224 0x5f4 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_1__SD1_CD_B 0x224 0x5f4 0x000 0x6 0x0 -#define MX6Q_PAD_GPIO_9__ESAI_RX_FS 0x228 0x5f8 0x85c 0x0 0x1 -#define MX6Q_PAD_GPIO_9__WDOG1_B 0x228 0x5f8 0x000 0x1 0x0 -#define MX6Q_PAD_GPIO_9__KEY_COL6 0x228 0x5f8 0x8ec 0x2 0x0 -#define MX6Q_PAD_GPIO_9__CCM_REF_EN_B 0x228 0x5f8 0x000 0x3 0x0 -#define MX6Q_PAD_GPIO_9__PWM1_OUT 0x228 0x5f8 0x000 0x4 0x0 -#define MX6Q_PAD_GPIO_9__GPIO1_IO09 0x228 0x5f8 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_9__SD1_WP 0x228 0x5f8 0x94c 0x6 0x1 -#define MX6Q_PAD_GPIO_3__ESAI_RX_HF_CLK 0x22c 0x5fc 0x864 0x0 0x1 -#define MX6Q_PAD_GPIO_3__I2C3_SCL 0x22c 0x5fc 0x8a8 0x2 0x1 -#define MX6Q_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x22c 0x5fc 0x000 0x3 0x0 -#define MX6Q_PAD_GPIO_3__CCM_CLKO2 0x22c 0x5fc 0x000 0x4 0x0 -#define MX6Q_PAD_GPIO_3__GPIO1_IO03 0x22c 0x5fc 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_3__USB_H1_OC 0x22c 0x5fc 0x948 0x6 0x1 -#define MX6Q_PAD_GPIO_3__MLB_CLK 0x22c 0x5fc 0x900 0x7 0x1 -#define MX6Q_PAD_GPIO_6__ESAI_TX_CLK 0x230 0x600 0x870 0x0 0x1 -#define MX6Q_PAD_GPIO_6__I2C3_SDA 0x230 0x600 0x8ac 0x2 0x1 -#define MX6Q_PAD_GPIO_6__GPIO1_IO06 0x230 0x600 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_6__SD2_LCTL 0x230 0x600 0x000 0x6 0x0 -#define MX6Q_PAD_GPIO_6__MLB_SIG 0x230 0x600 0x908 0x7 0x1 -#define MX6Q_PAD_GPIO_2__ESAI_TX_FS 0x234 0x604 0x860 0x0 0x1 -#define MX6Q_PAD_GPIO_2__KEY_ROW6 0x234 0x604 0x8f8 0x2 0x1 -#define MX6Q_PAD_GPIO_2__GPIO1_IO02 0x234 0x604 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_2__SD2_WP 0x234 0x604 0x000 0x6 0x0 -#define MX6Q_PAD_GPIO_2__MLB_DATA 0x234 0x604 0x904 0x7 0x1 -#define MX6Q_PAD_GPIO_4__ESAI_TX_HF_CLK 0x238 0x608 0x868 0x0 0x1 -#define MX6Q_PAD_GPIO_4__KEY_COL7 0x238 0x608 0x8f0 0x2 0x1 -#define MX6Q_PAD_GPIO_4__GPIO1_IO04 0x238 0x608 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_4__SD2_CD_B 0x238 0x608 0x000 0x6 0x0 -#define MX6Q_PAD_GPIO_5__ESAI_TX2_RX3 0x23c 0x60c 0x87c 0x0 0x1 -#define MX6Q_PAD_GPIO_5__KEY_ROW7 0x23c 0x60c 0x8fc 0x2 0x1 -#define MX6Q_PAD_GPIO_5__CCM_CLKO1 0x23c 0x60c 0x000 0x3 0x0 -#define MX6Q_PAD_GPIO_5__GPIO1_IO05 0x23c 0x60c 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_5__I2C3_SCL 0x23c 0x60c 0x8a8 0x6 0x2 -#define MX6Q_PAD_GPIO_5__ARM_EVENTI 0x23c 0x60c 0x000 0x7 0x0 -#define MX6Q_PAD_GPIO_7__ESAI_TX4_RX1 0x240 0x610 0x884 0x0 0x1 -#define MX6Q_PAD_GPIO_7__ECSPI5_RDY 0x240 0x610 0x000 0x1 0x0 -#define MX6Q_PAD_GPIO_7__EPIT1_OUT 0x240 0x610 0x000 0x2 0x0 -#define MX6Q_PAD_GPIO_7__FLEXCAN1_TX 0x240 0x610 0x000 0x3 0x0 -#define MX6Q_PAD_GPIO_7__UART2_TX_DATA 0x240 0x610 0x000 0x4 0x0 -#define MX6Q_PAD_GPIO_7__UART2_RX_DATA 0x240 0x610 0x928 0x4 0x2 -#define MX6Q_PAD_GPIO_7__GPIO1_IO07 0x240 0x610 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_7__SPDIF_LOCK 0x240 0x610 0x000 0x6 0x0 -#define MX6Q_PAD_GPIO_7__USB_OTG_HOST_MODE 0x240 0x610 0x000 0x7 0x0 -#define MX6Q_PAD_GPIO_8__ESAI_TX5_RX0 0x244 0x614 0x888 0x0 0x1 -#define MX6Q_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x244 0x614 0x000 0x1 0x0 -#define MX6Q_PAD_GPIO_8__EPIT2_OUT 0x244 0x614 0x000 0x2 0x0 -#define MX6Q_PAD_GPIO_8__FLEXCAN1_RX 0x244 0x614 0x7e4 0x3 0x1 -#define MX6Q_PAD_GPIO_8__UART2_RX_DATA 0x244 0x614 0x928 0x4 0x3 -#define MX6Q_PAD_GPIO_8__UART2_TX_DATA 0x244 0x614 0x000 0x4 0x0 -#define MX6Q_PAD_GPIO_8__GPIO1_IO08 0x244 0x614 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_8__SPDIF_SR_CLK 0x244 0x614 0x000 0x6 0x0 -#define MX6Q_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x244 0x614 0x000 0x7 0x0 -#define MX6Q_PAD_GPIO_16__ESAI_TX3_RX2 0x248 0x618 0x880 0x0 0x1 -#define MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x248 0x618 0x000 0x1 0x0 -#define MX6Q_PAD_GPIO_16__ENET_REF_CLK 0x248 0x618 0x83c 0x2 0x1 -#define MX6Q_PAD_GPIO_16__SD1_LCTL 0x248 0x618 0x000 0x3 0x0 -#define MX6Q_PAD_GPIO_16__SPDIF_IN 0x248 0x618 0x914 0x4 0x3 -#define MX6Q_PAD_GPIO_16__GPIO7_IO11 0x248 0x618 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_16__I2C3_SDA 0x248 0x618 0x8ac 0x6 0x2 -#define MX6Q_PAD_GPIO_16__JTAG_DE_B 0x248 0x618 0x000 0x7 0x0 -#define MX6Q_PAD_GPIO_17__ESAI_TX0 0x24c 0x61c 0x874 0x0 0x0 -#define MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x24c 0x61c 0x000 0x1 0x0 -#define MX6Q_PAD_GPIO_17__CCM_PMIC_READY 0x24c 0x61c 0x7f0 0x2 0x1 -#define MX6Q_PAD_GPIO_17__SDMA_EXT_EVENT0 0x24c 0x61c 0x90c 0x3 0x1 -#define MX6Q_PAD_GPIO_17__SPDIF_OUT 0x24c 0x61c 0x000 0x4 0x0 -#define MX6Q_PAD_GPIO_17__GPIO7_IO12 0x24c 0x61c 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_18__ESAI_TX1 0x250 0x620 0x878 0x0 0x0 -#define MX6Q_PAD_GPIO_18__ENET_RX_CLK 0x250 0x620 0x844 0x1 0x1 -#define MX6Q_PAD_GPIO_18__SD3_VSELECT 0x250 0x620 0x000 0x2 0x0 -#define MX6Q_PAD_GPIO_18__SDMA_EXT_EVENT1 0x250 0x620 0x910 0x3 0x1 -#define MX6Q_PAD_GPIO_18__ASRC_EXT_CLK 0x250 0x620 0x7b0 0x4 0x2 -#define MX6Q_PAD_GPIO_18__GPIO7_IO13 0x250 0x620 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_18__SNVS_VIO_5_CTL 0x250 0x620 0x000 0x6 0x0 -#define MX6Q_PAD_GPIO_19__KEY_COL5 0x254 0x624 0x8e8 0x0 0x1 -#define MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x254 0x624 0x000 0x1 0x0 -#define MX6Q_PAD_GPIO_19__SPDIF_OUT 0x254 0x624 0x000 0x2 0x0 -#define MX6Q_PAD_GPIO_19__CCM_CLKO1 0x254 0x624 0x000 0x3 0x0 -#define MX6Q_PAD_GPIO_19__ECSPI1_RDY 0x254 0x624 0x000 0x4 0x0 -#define MX6Q_PAD_GPIO_19__GPIO4_IO05 0x254 0x624 0x000 0x5 0x0 -#define MX6Q_PAD_GPIO_19__ENET_TX_ER 0x254 0x624 0x000 0x6 0x0 -#define MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x258 0x628 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_PIXCLK__GPIO5_IO18 0x258 0x628 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_PIXCLK__ARM_EVENTO 0x258 0x628 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x25c 0x62c 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_MCLK__CCM_CLKO1 0x25c 0x62c 0x000 0x3 0x0 -#define MX6Q_PAD_CSI0_MCLK__GPIO5_IO19 0x25c 0x62c 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x25c 0x62c 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x260 0x630 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DATA_EN__EIM_DATA00 0x260 0x630 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DATA_EN__GPIO5_IO20 0x260 0x630 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x260 0x630 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x264 0x634 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_VSYNC__EIM_DATA01 0x264 0x634 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_VSYNC__GPIO5_IO21 0x264 0x634 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_VSYNC__ARM_TRACE00 0x264 0x634 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x268 0x638 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT4__EIM_DATA02 0x268 0x638 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK 0x268 0x638 0x7f4 0x2 0x3 -#define MX6Q_PAD_CSI0_DAT4__KEY_COL5 0x268 0x638 0x8e8 0x3 0x2 -#define MX6Q_PAD_CSI0_DAT4__AUD3_TXC 0x268 0x638 0x000 0x4 0x0 -#define MX6Q_PAD_CSI0_DAT4__GPIO5_IO22 0x268 0x638 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT4__ARM_TRACE01 0x268 0x638 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x26c 0x63c 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT5__EIM_DATA03 0x26c 0x63c 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI 0x26c 0x63c 0x7fc 0x2 0x3 -#define MX6Q_PAD_CSI0_DAT5__KEY_ROW5 0x26c 0x63c 0x8f4 0x3 0x1 -#define MX6Q_PAD_CSI0_DAT5__AUD3_TXD 0x26c 0x63c 0x000 0x4 0x0 -#define MX6Q_PAD_CSI0_DAT5__GPIO5_IO23 0x26c 0x63c 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT5__ARM_TRACE02 0x26c 0x63c 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x270 0x640 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT6__EIM_DATA04 0x270 0x640 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO 0x270 0x640 0x7f8 0x2 0x3 -#define MX6Q_PAD_CSI0_DAT6__KEY_COL6 0x270 0x640 0x8ec 0x3 0x1 -#define MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x270 0x640 0x000 0x4 0x0 -#define MX6Q_PAD_CSI0_DAT6__GPIO5_IO24 0x270 0x640 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT6__ARM_TRACE03 0x270 0x640 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x274 0x644 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT7__EIM_DATA05 0x274 0x644 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0 0x274 0x644 0x800 0x2 0x3 -#define MX6Q_PAD_CSI0_DAT7__KEY_ROW6 0x274 0x644 0x8f8 0x3 0x2 -#define MX6Q_PAD_CSI0_DAT7__AUD3_RXD 0x274 0x644 0x000 0x4 0x0 -#define MX6Q_PAD_CSI0_DAT7__GPIO5_IO25 0x274 0x644 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT7__ARM_TRACE04 0x274 0x644 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x278 0x648 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT8__EIM_DATA06 0x278 0x648 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK 0x278 0x648 0x810 0x2 0x2 -#define MX6Q_PAD_CSI0_DAT8__KEY_COL7 0x278 0x648 0x8f0 0x3 0x2 -#define MX6Q_PAD_CSI0_DAT8__I2C1_SDA 0x278 0x648 0x89c 0x4 0x1 -#define MX6Q_PAD_CSI0_DAT8__GPIO5_IO26 0x278 0x648 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT8__ARM_TRACE05 0x278 0x648 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x27c 0x64c 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT9__EIM_DATA07 0x27c 0x64c 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI 0x27c 0x64c 0x818 0x2 0x2 -#define MX6Q_PAD_CSI0_DAT9__KEY_ROW7 0x27c 0x64c 0x8fc 0x3 0x2 -#define MX6Q_PAD_CSI0_DAT9__I2C1_SCL 0x27c 0x64c 0x898 0x4 0x1 -#define MX6Q_PAD_CSI0_DAT9__GPIO5_IO27 0x27c 0x64c 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT9__ARM_TRACE06 0x27c 0x64c 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x280 0x650 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT10__AUD3_RXC 0x280 0x650 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO 0x280 0x650 0x814 0x2 0x2 -#define MX6Q_PAD_CSI0_DAT10__UART1_TX_DATA 0x280 0x650 0x000 0x3 0x0 -#define MX6Q_PAD_CSI0_DAT10__UART1_RX_DATA 0x280 0x650 0x920 0x3 0x0 -#define MX6Q_PAD_CSI0_DAT10__GPIO5_IO28 0x280 0x650 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT10__ARM_TRACE07 0x280 0x650 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x284 0x654 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT11__AUD3_RXFS 0x284 0x654 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0 0x284 0x654 0x81c 0x2 0x2 -#define MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x284 0x654 0x920 0x3 0x1 -#define MX6Q_PAD_CSI0_DAT11__UART1_TX_DATA 0x284 0x654 0x000 0x3 0x0 -#define MX6Q_PAD_CSI0_DAT11__GPIO5_IO29 0x284 0x654 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT11__ARM_TRACE08 0x284 0x654 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x288 0x658 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT12__EIM_DATA08 0x288 0x658 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT12__UART4_TX_DATA 0x288 0x658 0x000 0x3 0x0 -#define MX6Q_PAD_CSI0_DAT12__UART4_RX_DATA 0x288 0x658 0x938 0x3 0x2 -#define MX6Q_PAD_CSI0_DAT12__GPIO5_IO30 0x288 0x658 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT12__ARM_TRACE09 0x288 0x658 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x28c 0x65c 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT13__EIM_DATA09 0x28c 0x65c 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT13__UART4_RX_DATA 0x28c 0x65c 0x938 0x3 0x3 -#define MX6Q_PAD_CSI0_DAT13__UART4_TX_DATA 0x28c 0x65c 0x000 0x3 0x0 -#define MX6Q_PAD_CSI0_DAT13__GPIO5_IO31 0x28c 0x65c 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT13__ARM_TRACE10 0x28c 0x65c 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x290 0x660 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT14__EIM_DATA10 0x290 0x660 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT14__UART5_TX_DATA 0x290 0x660 0x000 0x3 0x0 -#define MX6Q_PAD_CSI0_DAT14__UART5_RX_DATA 0x290 0x660 0x940 0x3 0x2 -#define MX6Q_PAD_CSI0_DAT14__GPIO6_IO00 0x290 0x660 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT14__ARM_TRACE11 0x290 0x660 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x294 0x664 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT15__EIM_DATA11 0x294 0x664 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT15__UART5_RX_DATA 0x294 0x664 0x940 0x3 0x3 -#define MX6Q_PAD_CSI0_DAT15__UART5_TX_DATA 0x294 0x664 0x000 0x3 0x0 -#define MX6Q_PAD_CSI0_DAT15__GPIO6_IO01 0x294 0x664 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT15__ARM_TRACE12 0x294 0x664 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x298 0x668 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT16__EIM_DATA12 0x298 0x668 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT16__UART4_RTS_B 0x298 0x668 0x934 0x3 0x0 -#define MX6Q_PAD_CSI0_DAT16__UART4_CTS_B 0x298 0x668 0x000 0x3 0x0 -#define MX6Q_PAD_CSI0_DAT16__GPIO6_IO02 0x298 0x668 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT16__ARM_TRACE13 0x298 0x668 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x29c 0x66c 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT17__EIM_DATA13 0x29c 0x66c 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT17__UART4_CTS_B 0x29c 0x66c 0x000 0x3 0x0 -#define MX6Q_PAD_CSI0_DAT17__UART4_RTS_B 0x29c 0x66c 0x934 0x3 0x1 -#define MX6Q_PAD_CSI0_DAT17__GPIO6_IO03 0x29c 0x66c 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT17__ARM_TRACE14 0x29c 0x66c 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x2a0 0x670 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT18__EIM_DATA14 0x2a0 0x670 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT18__UART5_RTS_B 0x2a0 0x670 0x93c 0x3 0x2 -#define MX6Q_PAD_CSI0_DAT18__UART5_CTS_B 0x2a0 0x670 0x000 0x3 0x0 -#define MX6Q_PAD_CSI0_DAT18__GPIO6_IO04 0x2a0 0x670 0x000 0x5 0x0 -#define MX6Q_PAD_CSI0_DAT18__ARM_TRACE15 0x2a0 0x670 0x000 0x7 0x0 -#define MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x2a4 0x674 0x000 0x0 0x0 -#define MX6Q_PAD_CSI0_DAT19__EIM_DATA15 0x2a4 0x674 0x000 0x1 0x0 -#define MX6Q_PAD_CSI0_DAT19__UART5_CTS_B 0x2a4 0x674 0x000 0x3 0x0 -#define MX6Q_PAD_CSI0_DAT19__UART5_RTS_B 0x2a4 0x674 0x93c 0x3 0x3 -#define MX6Q_PAD_CSI0_DAT19__GPIO6_IO05 0x2a4 0x674 0x000 0x5 0x0 -#define MX6Q_PAD_SD3_DAT7__SD3_DATA7 0x2a8 0x690 0x000 0x0 0x0 -#define MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x2a8 0x690 0x000 0x1 0x0 -#define MX6Q_PAD_SD3_DAT7__UART1_RX_DATA 0x2a8 0x690 0x920 0x1 0x2 -#define MX6Q_PAD_SD3_DAT7__GPIO6_IO17 0x2a8 0x690 0x000 0x5 0x0 -#define MX6Q_PAD_SD3_DAT6__SD3_DATA6 0x2ac 0x694 0x000 0x0 0x0 -#define MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x2ac 0x694 0x920 0x1 0x3 -#define MX6Q_PAD_SD3_DAT6__UART1_TX_DATA 0x2ac 0x694 0x000 0x1 0x0 -#define MX6Q_PAD_SD3_DAT6__GPIO6_IO18 0x2ac 0x694 0x000 0x5 0x0 -#define MX6Q_PAD_SD3_DAT5__SD3_DATA5 0x2b0 0x698 0x000 0x0 0x0 -#define MX6Q_PAD_SD3_DAT5__UART2_TX_DATA 0x2b0 0x698 0x000 0x1 0x0 -#define MX6Q_PAD_SD3_DAT5__UART2_RX_DATA 0x2b0 0x698 0x928 0x1 0x4 -#define MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x2b0 0x698 0x000 0x5 0x0 -#define MX6Q_PAD_SD3_DAT4__SD3_DATA4 0x2b4 0x69c 0x000 0x0 0x0 -#define MX6Q_PAD_SD3_DAT4__UART2_RX_DATA 0x2b4 0x69c 0x928 0x1 0x5 -#define MX6Q_PAD_SD3_DAT4__UART2_TX_DATA 0x2b4 0x69c 0x000 0x1 0x0 -#define MX6Q_PAD_SD3_DAT4__GPIO7_IO01 0x2b4 0x69c 0x000 0x5 0x0 -#define MX6Q_PAD_SD3_CMD__SD3_CMD 0x2b8 0x6a0 0x000 0x0 0x0 -#define MX6Q_PAD_SD3_CMD__UART2_CTS_B 0x2b8 0x6a0 0x000 0x1 0x0 -#define MX6Q_PAD_SD3_CMD__UART2_RTS_B 0x2b8 0x6a0 0x924 0x1 0x2 -#define MX6Q_PAD_SD3_CMD__FLEXCAN1_TX 0x2b8 0x6a0 0x000 0x2 0x0 -#define MX6Q_PAD_SD3_CMD__GPIO7_IO02 0x2b8 0x6a0 0x000 0x5 0x0 -#define MX6Q_PAD_SD3_CLK__SD3_CLK 0x2bc 0x6a4 0x000 0x0 0x0 -#define MX6Q_PAD_SD3_CLK__UART2_RTS_B 0x2bc 0x6a4 0x924 0x1 0x3 -#define MX6Q_PAD_SD3_CLK__UART2_CTS_B 0x2bc 0x6a4 0x000 0x1 0x0 -#define MX6Q_PAD_SD3_CLK__FLEXCAN1_RX 0x2bc 0x6a4 0x7e4 0x2 0x2 -#define MX6Q_PAD_SD3_CLK__GPIO7_IO03 0x2bc 0x6a4 0x000 0x5 0x0 -#define MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x2c0 0x6a8 0x000 0x0 0x0 -#define MX6Q_PAD_SD3_DAT0__UART1_CTS_B 0x2c0 0x6a8 0x000 0x1 0x0 -#define MX6Q_PAD_SD3_DAT0__UART1_RTS_B 0x2c0 0x6a8 0x91c 0x1 0x2 -#define MX6Q_PAD_SD3_DAT0__FLEXCAN2_TX 0x2c0 0x6a8 0x000 0x2 0x0 -#define MX6Q_PAD_SD3_DAT0__GPIO7_IO04 0x2c0 0x6a8 0x000 0x5 0x0 -#define MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x2c4 0x6ac 0x000 0x0 0x0 -#define MX6Q_PAD_SD3_DAT1__UART1_RTS_B 0x2c4 0x6ac 0x91c 0x1 0x3 -#define MX6Q_PAD_SD3_DAT1__UART1_CTS_B 0x2c4 0x6ac 0x000 0x1 0x0 -#define MX6Q_PAD_SD3_DAT1__FLEXCAN2_RX 0x2c4 0x6ac 0x7e8 0x2 0x1 -#define MX6Q_PAD_SD3_DAT1__GPIO7_IO05 0x2c4 0x6ac 0x000 0x5 0x0 -#define MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x2c8 0x6b0 0x000 0x0 0x0 -#define MX6Q_PAD_SD3_DAT2__GPIO7_IO06 0x2c8 0x6b0 0x000 0x5 0x0 -#define MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x2cc 0x6b4 0x000 0x0 0x0 -#define MX6Q_PAD_SD3_DAT3__UART3_CTS_B 0x2cc 0x6b4 0x000 0x1 0x0 -#define MX6Q_PAD_SD3_DAT3__UART3_RTS_B 0x2cc 0x6b4 0x92c 0x1 0x4 -#define MX6Q_PAD_SD3_DAT3__GPIO7_IO07 0x2cc 0x6b4 0x000 0x5 0x0 -#define MX6Q_PAD_SD3_RST__SD3_RESET 0x2d0 0x6b8 0x000 0x0 0x0 -#define MX6Q_PAD_SD3_RST__UART3_RTS_B 0x2d0 0x6b8 0x92c 0x1 0x5 -#define MX6Q_PAD_SD3_RST__UART3_CTS_B 0x2d0 0x6b8 0x000 0x1 0x0 -#define MX6Q_PAD_SD3_RST__GPIO7_IO08 0x2d0 0x6b8 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_CLE__NAND_CLE 0x2d4 0x6bc 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_CLE__IPU2_SISG4 0x2d4 0x6bc 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_CLE__GPIO6_IO07 0x2d4 0x6bc 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_ALE__NAND_ALE 0x2d8 0x6c0 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_ALE__SD4_RESET 0x2d8 0x6c0 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_ALE__GPIO6_IO08 0x2d8 0x6c0 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0x2dc 0x6c4 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_WP_B__IPU2_SISG5 0x2dc 0x6c4 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_WP_B__GPIO6_IO09 0x2dc 0x6c4 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_RB0__NAND_READY_B 0x2e0 0x6c8 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN01 0x2e0 0x6c8 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_RB0__GPIO6_IO10 0x2e0 0x6c8 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0x2e4 0x6cc 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_CS0__GPIO6_IO11 0x2e4 0x6cc 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0x2e8 0x6d0 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_CS1__SD4_VSELECT 0x2e8 0x6d0 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_CS1__SD3_VSELECT 0x2e8 0x6d0 0x000 0x2 0x0 -#define MX6Q_PAD_NANDF_CS1__GPIO6_IO14 0x2e8 0x6d0 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0x2ec 0x6d4 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_CS2__IPU1_SISG0 0x2ec 0x6d4 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_CS2__ESAI_TX0 0x2ec 0x6d4 0x874 0x2 0x1 -#define MX6Q_PAD_NANDF_CS2__EIM_CRE 0x2ec 0x6d4 0x000 0x3 0x0 -#define MX6Q_PAD_NANDF_CS2__CCM_CLKO2 0x2ec 0x6d4 0x000 0x4 0x0 -#define MX6Q_PAD_NANDF_CS2__GPIO6_IO15 0x2ec 0x6d4 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_CS2__IPU2_SISG0 0x2ec 0x6d4 0x000 0x6 0x0 -#define MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0x2f0 0x6d8 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_CS3__IPU1_SISG1 0x2f0 0x6d8 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_CS3__ESAI_TX1 0x2f0 0x6d8 0x878 0x2 0x1 -#define MX6Q_PAD_NANDF_CS3__EIM_ADDR26 0x2f0 0x6d8 0x000 0x3 0x0 -#define MX6Q_PAD_NANDF_CS3__GPIO6_IO16 0x2f0 0x6d8 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_CS3__IPU2_SISG1 0x2f0 0x6d8 0x000 0x6 0x0 -#define MX6Q_PAD_SD4_CMD__SD4_CMD 0x2f4 0x6dc 0x000 0x0 0x0 -#define MX6Q_PAD_SD4_CMD__NAND_RE_B 0x2f4 0x6dc 0x000 0x1 0x0 -#define MX6Q_PAD_SD4_CMD__UART3_TX_DATA 0x2f4 0x6dc 0x000 0x2 0x0 -#define MX6Q_PAD_SD4_CMD__UART3_RX_DATA 0x2f4 0x6dc 0x930 0x2 0x2 -#define MX6Q_PAD_SD4_CMD__GPIO7_IO09 0x2f4 0x6dc 0x000 0x5 0x0 -#define MX6Q_PAD_SD4_CLK__SD4_CLK 0x2f8 0x6e0 0x000 0x0 0x0 -#define MX6Q_PAD_SD4_CLK__NAND_WE_B 0x2f8 0x6e0 0x000 0x1 0x0 -#define MX6Q_PAD_SD4_CLK__UART3_RX_DATA 0x2f8 0x6e0 0x930 0x2 0x3 -#define MX6Q_PAD_SD4_CLK__UART3_TX_DATA 0x2f8 0x6e0 0x000 0x2 0x0 -#define MX6Q_PAD_SD4_CLK__GPIO7_IO10 0x2f8 0x6e0 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_D0__NAND_DATA00 0x2fc 0x6e4 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_D0__SD1_DATA4 0x2fc 0x6e4 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_D0__GPIO2_IO00 0x2fc 0x6e4 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_D1__NAND_DATA01 0x300 0x6e8 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_D1__SD1_DATA5 0x300 0x6e8 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x300 0x6e8 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_D2__NAND_DATA02 0x304 0x6ec 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_D2__SD1_DATA6 0x304 0x6ec 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x304 0x6ec 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_D3__NAND_DATA03 0x308 0x6f0 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_D3__SD1_DATA7 0x308 0x6f0 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x308 0x6f0 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_D4__NAND_DATA04 0x30c 0x6f4 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_D4__SD2_DATA4 0x30c 0x6f4 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_D4__GPIO2_IO04 0x30c 0x6f4 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_D5__NAND_DATA05 0x310 0x6f8 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_D5__SD2_DATA5 0x310 0x6f8 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_D5__GPIO2_IO05 0x310 0x6f8 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_D6__NAND_DATA06 0x314 0x6fc 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_D6__SD2_DATA6 0x314 0x6fc 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_D6__GPIO2_IO06 0x314 0x6fc 0x000 0x5 0x0 -#define MX6Q_PAD_NANDF_D7__NAND_DATA07 0x318 0x700 0x000 0x0 0x0 -#define MX6Q_PAD_NANDF_D7__SD2_DATA7 0x318 0x700 0x000 0x1 0x0 -#define MX6Q_PAD_NANDF_D7__GPIO2_IO07 0x318 0x700 0x000 0x5 0x0 -#define MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x31c 0x704 0x000 0x1 0x0 -#define MX6Q_PAD_SD4_DAT0__NAND_DQS 0x31c 0x704 0x000 0x2 0x0 -#define MX6Q_PAD_SD4_DAT0__GPIO2_IO08 0x31c 0x704 0x000 0x5 0x0 -#define MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x320 0x708 0x000 0x1 0x0 -#define MX6Q_PAD_SD4_DAT1__PWM3_OUT 0x320 0x708 0x000 0x2 0x0 -#define MX6Q_PAD_SD4_DAT1__GPIO2_IO09 0x320 0x708 0x000 0x5 0x0 -#define MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x324 0x70c 0x000 0x1 0x0 -#define MX6Q_PAD_SD4_DAT2__PWM4_OUT 0x324 0x70c 0x000 0x2 0x0 -#define MX6Q_PAD_SD4_DAT2__GPIO2_IO10 0x324 0x70c 0x000 0x5 0x0 -#define MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x328 0x710 0x000 0x1 0x0 -#define MX6Q_PAD_SD4_DAT3__GPIO2_IO11 0x328 0x710 0x000 0x5 0x0 -#define MX6Q_PAD_SD4_DAT4__SD4_DATA4 0x32c 0x714 0x000 0x1 0x0 -#define MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x32c 0x714 0x928 0x2 0x6 -#define MX6Q_PAD_SD4_DAT4__UART2_TX_DATA 0x32c 0x714 0x000 0x2 0x0 -#define MX6Q_PAD_SD4_DAT4__GPIO2_IO12 0x32c 0x714 0x000 0x5 0x0 -#define MX6Q_PAD_SD4_DAT5__SD4_DATA5 0x330 0x718 0x000 0x1 0x0 -#define MX6Q_PAD_SD4_DAT5__UART2_RTS_B 0x330 0x718 0x924 0x2 0x4 -#define MX6Q_PAD_SD4_DAT5__UART2_CTS_B 0x330 0x718 0x000 0x2 0x0 -#define MX6Q_PAD_SD4_DAT5__GPIO2_IO13 0x330 0x718 0x000 0x5 0x0 -#define MX6Q_PAD_SD4_DAT6__SD4_DATA6 0x334 0x71c 0x000 0x1 0x0 -#define MX6Q_PAD_SD4_DAT6__UART2_CTS_B 0x334 0x71c 0x000 0x2 0x0 -#define MX6Q_PAD_SD4_DAT6__UART2_RTS_B 0x334 0x71c 0x924 0x2 0x5 -#define MX6Q_PAD_SD4_DAT6__GPIO2_IO14 0x334 0x71c 0x000 0x5 0x0 -#define MX6Q_PAD_SD4_DAT7__SD4_DATA7 0x338 0x720 0x000 0x1 0x0 -#define MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x338 0x720 0x000 0x2 0x0 -#define MX6Q_PAD_SD4_DAT7__UART2_RX_DATA 0x338 0x720 0x928 0x2 0x7 -#define MX6Q_PAD_SD4_DAT7__GPIO2_IO15 0x338 0x720 0x000 0x5 0x0 -#define MX6Q_PAD_SD1_DAT1__SD1_DATA1 0x33c 0x724 0x000 0x0 0x0 -#define MX6Q_PAD_SD1_DAT1__ECSPI5_SS0 0x33c 0x724 0x834 0x1 0x1 -#define MX6Q_PAD_SD1_DAT1__PWM3_OUT 0x33c 0x724 0x000 0x2 0x0 -#define MX6Q_PAD_SD1_DAT1__GPT_CAPTURE2 0x33c 0x724 0x000 0x3 0x0 -#define MX6Q_PAD_SD1_DAT1__GPIO1_IO17 0x33c 0x724 0x000 0x5 0x0 -#define MX6Q_PAD_SD1_DAT0__SD1_DATA0 0x340 0x728 0x000 0x0 0x0 -#define MX6Q_PAD_SD1_DAT0__ECSPI5_MISO 0x340 0x728 0x82c 0x1 0x1 -#define MX6Q_PAD_SD1_DAT0__GPT_CAPTURE1 0x340 0x728 0x000 0x3 0x0 -#define MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x340 0x728 0x000 0x5 0x0 -#define MX6Q_PAD_SD1_DAT3__SD1_DATA3 0x344 0x72c 0x000 0x0 0x0 -#define MX6Q_PAD_SD1_DAT3__ECSPI5_SS2 0x344 0x72c 0x000 0x1 0x0 -#define MX6Q_PAD_SD1_DAT3__GPT_COMPARE3 0x344 0x72c 0x000 0x2 0x0 -#define MX6Q_PAD_SD1_DAT3__PWM1_OUT 0x344 0x72c 0x000 0x3 0x0 -#define MX6Q_PAD_SD1_DAT3__WDOG2_B 0x344 0x72c 0x000 0x4 0x0 -#define MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x344 0x72c 0x000 0x5 0x0 -#define MX6Q_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x344 0x72c 0x000 0x6 0x0 -#define MX6Q_PAD_SD1_CMD__SD1_CMD 0x348 0x730 0x000 0x0 0x0 -#define MX6Q_PAD_SD1_CMD__ECSPI5_MOSI 0x348 0x730 0x830 0x1 0x0 -#define MX6Q_PAD_SD1_CMD__PWM4_OUT 0x348 0x730 0x000 0x2 0x0 -#define MX6Q_PAD_SD1_CMD__GPT_COMPARE1 0x348 0x730 0x000 0x3 0x0 -#define MX6Q_PAD_SD1_CMD__GPIO1_IO18 0x348 0x730 0x000 0x5 0x0 -#define MX6Q_PAD_SD1_DAT2__SD1_DATA2 0x34c 0x734 0x000 0x0 0x0 -#define MX6Q_PAD_SD1_DAT2__ECSPI5_SS1 0x34c 0x734 0x838 0x1 0x1 -#define MX6Q_PAD_SD1_DAT2__GPT_COMPARE2 0x34c 0x734 0x000 0x2 0x0 -#define MX6Q_PAD_SD1_DAT2__PWM2_OUT 0x34c 0x734 0x000 0x3 0x0 -#define MX6Q_PAD_SD1_DAT2__WDOG1_B 0x34c 0x734 0x000 0x4 0x0 -#define MX6Q_PAD_SD1_DAT2__GPIO1_IO19 0x34c 0x734 0x000 0x5 0x0 -#define MX6Q_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x34c 0x734 0x000 0x6 0x0 -#define MX6Q_PAD_SD1_CLK__SD1_CLK 0x350 0x738 0x000 0x0 0x0 -#define MX6Q_PAD_SD1_CLK__ECSPI5_SCLK 0x350 0x738 0x828 0x1 0x0 -#define MX6Q_PAD_SD1_CLK__GPT_CLKIN 0x350 0x738 0x000 0x3 0x0 -#define MX6Q_PAD_SD1_CLK__GPIO1_IO20 0x350 0x738 0x000 0x5 0x0 -#define MX6Q_PAD_SD2_CLK__SD2_CLK 0x354 0x73c 0x000 0x0 0x0 -#define MX6Q_PAD_SD2_CLK__ECSPI5_SCLK 0x354 0x73c 0x828 0x1 0x1 -#define MX6Q_PAD_SD2_CLK__KEY_COL5 0x354 0x73c 0x8e8 0x2 0x3 -#define MX6Q_PAD_SD2_CLK__AUD4_RXFS 0x354 0x73c 0x7c0 0x3 0x1 -#define MX6Q_PAD_SD2_CLK__GPIO1_IO10 0x354 0x73c 0x000 0x5 0x0 -#define MX6Q_PAD_SD2_CMD__SD2_CMD 0x358 0x740 0x000 0x0 0x0 -#define MX6Q_PAD_SD2_CMD__ECSPI5_MOSI 0x358 0x740 0x830 0x1 0x1 -#define MX6Q_PAD_SD2_CMD__KEY_ROW5 0x358 0x740 0x8f4 0x2 0x2 -#define MX6Q_PAD_SD2_CMD__AUD4_RXC 0x358 0x740 0x7bc 0x3 0x1 -#define MX6Q_PAD_SD2_CMD__GPIO1_IO11 0x358 0x740 0x000 0x5 0x0 -#define MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x35c 0x744 0x000 0x0 0x0 -#define MX6Q_PAD_SD2_DAT3__ECSPI5_SS3 0x35c 0x744 0x000 0x1 0x0 -#define MX6Q_PAD_SD2_DAT3__KEY_COL6 0x35c 0x744 0x8ec 0x2 0x2 -#define MX6Q_PAD_SD2_DAT3__AUD4_TXC 0x35c 0x744 0x7c4 0x3 0x1 -#define MX6Q_PAD_SD2_DAT3__GPIO1_IO12 0x35c 0x744 0x000 0x5 0x0 +#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x04c 0x360 0x000 0x0 0x0 +#define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0 0x04c 0x360 0x834 0x1 0x0 +#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0x04c 0x360 0x000 0x2 0x0 +#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x04c 0x360 0x7c8 0x3 0x0 +#define MX6QDL_PAD_SD2_DAT1__KEY_COL7 0x04c 0x360 0x8f0 0x4 0x0 +#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x04c 0x360 0x000 0x5 0x0 +#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x050 0x364 0x000 0x0 0x0 +#define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1 0x050 0x364 0x838 0x1 0x0 +#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B 0x050 0x364 0x000 0x2 0x0 +#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x050 0x364 0x7b8 0x3 0x0 +#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6 0x050 0x364 0x8f8 0x4 0x0 +#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x050 0x364 0x000 0x5 0x0 +#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x054 0x368 0x000 0x0 0x0 +#define MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO 0x054 0x368 0x82c 0x1 0x0 +#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x054 0x368 0x7b4 0x3 0x0 +#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7 0x054 0x368 0x8fc 0x4 0x0 +#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x054 0x368 0x000 0x5 0x0 +#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT 0x054 0x368 0x000 0x6 0x0 +#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x058 0x36c 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x058 0x36c 0x000 0x1 0x0 +#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x058 0x36c 0x918 0x2 0x0 +#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19 0x058 0x36c 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x058 0x36c 0x000 0x7 0x0 +#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY 0x05c 0x370 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x05c 0x370 0x000 0x1 0x0 +#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x05c 0x370 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG 0x060 0x374 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x060 0x374 0x000 0x1 0x0 +#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x060 0x374 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA 0x064 0x378 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x064 0x378 0x000 0x1 0x0 +#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x064 0x378 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE 0x068 0x37c 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x068 0x37c 0x000 0x1 0x0 +#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x068 0x37c 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x06c 0x380 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x06c 0x380 0x858 0x1 0x0 +#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24 0x06c 0x380 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY 0x070 0x384 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x070 0x384 0x848 0x1 0x0 +#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25 0x070 0x384 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x074 0x388 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x074 0x388 0x000 0x1 0x0 +#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x074 0x388 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x074 0x388 0x83c 0x7 0x0 +#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG 0x078 0x38c 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x078 0x38c 0x84c 0x1 0x0 +#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27 0x078 0x38c 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA 0x07c 0x390 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x07c 0x390 0x850 0x1 0x0 +#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28 0x07c 0x390 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE 0x080 0x394 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x080 0x394 0x854 0x1 0x0 +#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29 0x080 0x394 0x000 0x5 0x0 +#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x084 0x398 0x000 0x0 0x0 +#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x084 0x398 0x844 0x1 0x0 +#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x084 0x398 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A25__EIM_ADDR25 0x088 0x39c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1 0x088 0x39c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY 0x088 0x39c 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12 0x088 0x39c 0x000 0x3 0x0 +#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS 0x088 0x39c 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x088 0x39c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x088 0x39c 0x88c 0x6 0x0 +#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0x08c 0x3a0 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0 0x08c 0x3a0 0x800 0x1 0x0 +#define MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x08c 0x3a0 0x8d4 0x3 0x0 +#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x08c 0x3a0 0x890 0x4 0x0 +#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x08c 0x3a0 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x08c 0x3a0 0x8a0 0x6 0x0 +#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30 0x08c 0x3a0 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D16__EIM_DATA16 0x090 0x3a4 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x090 0x3a4 0x7f4 0x1 0x0 +#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05 0x090 0x3a4 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18 0x090 0x3a4 0x8d0 0x3 0x0 +#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x090 0x3a4 0x894 0x4 0x0 +#define MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x090 0x3a4 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D16__I2C2_SDA 0x090 0x3a4 0x8a4 0x6 0x0 +#define MX6QDL_PAD_EIM_D17__EIM_DATA17 0x094 0x3a8 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x094 0x3a8 0x7f8 0x1 0x0 +#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06 0x094 0x3a8 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D17__IPU2_CSI1_PIXCLK 0x094 0x3a8 0x8e0 0x3 0x0 +#define MX6QDL_PAD_EIM_D17__DCIC1_OUT 0x094 0x3a8 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x094 0x3a8 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D17__I2C3_SCL 0x094 0x3a8 0x8a8 0x6 0x0 +#define MX6QDL_PAD_EIM_D18__EIM_DATA18 0x098 0x3ac 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x098 0x3ac 0x7fc 0x1 0x0 +#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07 0x098 0x3ac 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17 0x098 0x3ac 0x8cc 0x3 0x0 +#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS 0x098 0x3ac 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x098 0x3ac 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D18__I2C3_SDA 0x098 0x3ac 0x8ac 0x6 0x0 +#define MX6QDL_PAD_EIM_D19__EIM_DATA19 0x09c 0x3b0 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1 0x09c 0x3b0 0x804 0x1 0x0 +#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08 0x09c 0x3b0 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16 0x09c 0x3b0 0x8c8 0x3 0x0 +#define MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x09c 0x3b0 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x09c 0x3b0 0x91c 0x4 0x0 +#define MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x09c 0x3b0 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D19__EPIT1_OUT 0x09c 0x3b0 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D20__EIM_DATA20 0x0a0 0x3b4 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0 0x0a0 0x3b4 0x824 0x1 0x0 +#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16 0x0a0 0x3b4 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15 0x0a0 0x3b4 0x8c4 0x3 0x0 +#define MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x0a0 0x3b4 0x91c 0x4 0x1 +#define MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x0a0 0x3b4 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0a0 0x3b4 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D20__EPIT2_OUT 0x0a0 0x3b4 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D21__EIM_DATA21 0x0a4 0x3b8 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x0a4 0x3b8 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17 0x0a4 0x3b8 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D21__IPU2_CSI1_DATA11 0x0a4 0x3b8 0x8b4 0x3 0x0 +#define MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x0a4 0x3b8 0x944 0x4 0x0 +#define MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x0a4 0x3b8 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D21__I2C1_SCL 0x0a4 0x3b8 0x898 0x6 0x0 +#define MX6QDL_PAD_EIM_D21__SPDIF_IN 0x0a4 0x3b8 0x914 0x7 0x0 +#define MX6QDL_PAD_EIM_D22__EIM_DATA22 0x0a8 0x3bc 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x0a8 0x3bc 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01 0x0a8 0x3bc 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D22__IPU2_CSI1_DATA10 0x0a8 0x3bc 0x8b0 0x3 0x0 +#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0a8 0x3bc 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0a8 0x3bc 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D22__SPDIF_OUT 0x0a8 0x3bc 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D23__EIM_DATA23 0x0ac 0x3c0 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS 0x0ac 0x3c0 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x0ac 0x3c0 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x0ac 0x3c0 0x92c 0x2 0x0 +#define MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x0ac 0x3c0 0x000 0x3 0x0 +#define MX6QDL_PAD_EIM_D23__IPU2_CSI1_DATA_EN 0x0ac 0x3c0 0x8d8 0x4 0x0 +#define MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0ac 0x3c0 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02 0x0ac 0x3c0 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14 0x0ac 0x3c0 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0x0b0 0x3c4 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY 0x0b0 0x3c4 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x0b0 0x3c4 0x92c 0x2 0x1 +#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B 0x0b0 0x3c4 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_EB3__UART1_RI_B 0x0b0 0x3c4 0x000 0x3 0x0 +#define MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x0b0 0x3c4 0x8dc 0x4 0x0 +#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x0b0 0x3c4 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03 0x0b0 0x3c4 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31 0x0b0 0x3c4 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D24__EIM_DATA24 0x0b4 0x3c8 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2 0x0b4 0x3c8 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x0b4 0x3c8 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x0b4 0x3c8 0x930 0x2 0x0 +#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2 0x0b4 0x3c8 0x808 0x3 0x0 +#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2 0x0b4 0x3c8 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x0b4 0x3c8 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x0b4 0x3c8 0x7d8 0x6 0x0 +#define MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x0b4 0x3c8 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D25__EIM_DATA25 0x0b8 0x3cc 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3 0x0b8 0x3cc 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x0b8 0x3cc 0x930 0x2 0x1 +#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x0b8 0x3cc 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3 0x0b8 0x3cc 0x80c 0x3 0x0 +#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3 0x0b8 0x3cc 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x0b8 0x3cc 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D25__AUD5_RXC 0x0b8 0x3cc 0x7d4 0x6 0x0 +#define MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x0b8 0x3cc 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D26__EIM_DATA26 0x0bc 0x3d0 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11 0x0bc 0x3d0 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01 0x0bc 0x3d0 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14 0x0bc 0x3d0 0x8c0 0x3 0x0 +#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x0bc 0x3d0 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x0bc 0x3d0 0x928 0x4 0x0 +#define MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0bc 0x3d0 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D26__IPU1_SISG2 0x0bc 0x3d0 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x0bc 0x3d0 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D27__EIM_DATA27 0x0c0 0x3d4 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13 0x0c0 0x3d4 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00 0x0c0 0x3d4 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13 0x0c0 0x3d4 0x8bc 0x3 0x0 +#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x0c0 0x3d4 0x928 0x4 0x1 +#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x0c0 0x3d4 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0c0 0x3d4 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D27__IPU1_SISG3 0x0c0 0x3d4 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x0c0 0x3d4 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D28__EIM_DATA28 0x0c4 0x3d8 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D28__I2C1_SDA 0x0c4 0x3d8 0x89c 0x1 0x0 +#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x0c4 0x3d8 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D28__IPU2_CSI1_DATA12 0x0c4 0x3d8 0x8b8 0x3 0x0 +#define MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x0c4 0x3d8 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x0c4 0x3d8 0x924 0x4 0x0 +#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x0c4 0x3d8 0x924 0x4 0x0 +#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B 0x0c4 0x3d8 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0c4 0x3d8 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG 0x0c4 0x3d8 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13 0x0c4 0x3d8 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D29__EIM_DATA29 0x0c8 0x3dc 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15 0x0c8 0x3dc 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0 0x0c8 0x3dc 0x824 0x2 0x1 +#define MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x0c8 0x3dc 0x924 0x4 0x1 +#define MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0c8 0x3dc 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x0c4 0x3dc 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x0c4 0x3dc 0x924 0x4 0x1 +#define MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0c8 0x3dc 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x0c8 0x3dc 0x8e4 0x6 0x0 +#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14 0x0c8 0x3dc 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_D30__EIM_DATA30 0x0cc 0x3e0 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x0cc 0x3e0 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11 0x0cc 0x3e0 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03 0x0cc 0x3e0 0x000 0x3 0x0 +#define MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x0cc 0x3e0 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x0cc 0x3e0 0x92c 0x4 0x2 +#define MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0cc 0x3e0 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D30__USB_H1_OC 0x0cc 0x3e0 0x948 0x6 0x0 +#define MX6QDL_PAD_EIM_D31__EIM_DATA31 0x0d0 0x3e4 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x0d0 0x3e4 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12 0x0d0 0x3e4 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02 0x0d0 0x3e4 0x000 0x3 0x0 +#define MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x0d0 0x3e4 0x92c 0x4 0x3 +#define MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x0d0 0x3e4 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0d0 0x3e4 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_D31__USB_H1_PWR 0x0d0 0x3e4 0x000 0x6 0x0 +#define MX6QDL_PAD_EIM_A24__EIM_ADDR24 0x0d4 0x3e8 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x0d4 0x3e8 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A24__IPU2_CSI1_DATA19 0x0d4 0x3e8 0x8d4 0x2 0x1 +#define MX6QDL_PAD_EIM_A24__IPU2_SISG2 0x0d4 0x3e8 0x000 0x3 0x0 +#define MX6QDL_PAD_EIM_A24__IPU1_SISG2 0x0d4 0x3e8 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0d4 0x3e8 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24 0x0d4 0x3e8 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A23__EIM_ADDR23 0x0d8 0x3ec 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x0d8 0x3ec 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A23__IPU2_CSI1_DATA18 0x0d8 0x3ec 0x8d0 0x2 0x1 +#define MX6QDL_PAD_EIM_A23__IPU2_SISG3 0x0d8 0x3ec 0x000 0x3 0x0 +#define MX6QDL_PAD_EIM_A23__IPU1_SISG3 0x0d8 0x3ec 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x0d8 0x3ec 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23 0x0d8 0x3ec 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A22__EIM_ADDR22 0x0dc 0x3f0 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x0dc 0x3f0 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A22__IPU2_CSI1_DATA17 0x0dc 0x3f0 0x8cc 0x2 0x1 +#define MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x0dc 0x3f0 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22 0x0dc 0x3f0 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A21__EIM_ADDR21 0x0e0 0x3f4 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x0e0 0x3f4 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A21__IPU2_CSI1_DATA16 0x0e0 0x3f4 0x8c8 0x2 0x1 +#define MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x0e0 0x3f4 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21 0x0e0 0x3f4 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A20__EIM_ADDR20 0x0e4 0x3f8 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x0e4 0x3f8 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A20__IPU2_CSI1_DATA15 0x0e4 0x3f8 0x8c4 0x2 0x1 +#define MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x0e4 0x3f8 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20 0x0e4 0x3f8 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A19__EIM_ADDR19 0x0e8 0x3fc 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x0e8 0x3fc 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A19__IPU2_CSI1_DATA14 0x0e8 0x3fc 0x8c0 0x2 0x1 +#define MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x0e8 0x3fc 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19 0x0e8 0x3fc 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A18__EIM_ADDR18 0x0ec 0x400 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x0ec 0x400 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A18__IPU2_CSI1_DATA13 0x0ec 0x400 0x8bc 0x2 0x1 +#define MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x0ec 0x400 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18 0x0ec 0x400 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A17__EIM_ADDR17 0x0f0 0x404 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x0f0 0x404 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12 0x0f0 0x404 0x8b8 0x2 0x1 +#define MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x0f0 0x404 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17 0x0f0 0x404 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_A16__EIM_ADDR16 0x0f4 0x408 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x0f4 0x408 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x0f4 0x408 0x8e0 0x2 0x1 +#define MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x0f4 0x408 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16 0x0f4 0x408 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0x0f8 0x40c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05 0x0f8 0x40c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x0f8 0x40c 0x810 0x2 0x0 +#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0f8 0x40c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0x0fc 0x410 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06 0x0fc 0x410 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x0fc 0x410 0x818 0x2 0x0 +#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0fc 0x410 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_OE__EIM_OE_B 0x100 0x414 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07 0x100 0x414 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100 0x414 0x814 0x2 0x0 +#define MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x100 0x414 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_RW__EIM_RW 0x104 0x418 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08 0x104 0x418 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0 0x104 0x418 0x81c 0x2 0x0 +#define MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x104 0x418 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29 0x104 0x418 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0x108 0x41c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17 0x108 0x41c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1 0x108 0x41c 0x820 0x2 0x0 +#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x108 0x41c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26 0x108 0x41c 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0x10c 0x420 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x10c 0x420 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_EB0__IPU2_CSI1_DATA11 0x10c 0x420 0x8b4 0x2 0x1 +#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY 0x10c 0x420 0x7f0 0x4 0x0 +#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x10c 0x420 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27 0x10c 0x420 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0x110 0x424 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x110 0x424 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_EB1__IPU2_CSI1_DATA10 0x110 0x424 0x8b0 0x2 0x1 +#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x110 0x424 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28 0x110 0x424 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA0__EIM_AD00 0x114 0x428 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x114 0x428 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA0__IPU2_CSI1_DATA09 0x114 0x428 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x114 0x428 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00 0x114 0x428 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA1__EIM_AD01 0x118 0x42c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x118 0x42c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA1__IPU2_CSI1_DATA08 0x118 0x42c 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x118 0x42c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01 0x118 0x42c 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA2__EIM_AD02 0x11c 0x430 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x11c 0x430 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA2__IPU2_CSI1_DATA07 0x11c 0x430 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x11c 0x430 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02 0x11c 0x430 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA3__EIM_AD03 0x120 0x434 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x120 0x434 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA3__IPU2_CSI1_DATA06 0x120 0x434 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x120 0x434 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03 0x120 0x434 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA4__EIM_AD04 0x124 0x438 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x124 0x438 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA4__IPU2_CSI1_DATA05 0x124 0x438 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x124 0x438 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04 0x124 0x438 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA5__EIM_AD05 0x128 0x43c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x128 0x43c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA5__IPU2_CSI1_DATA04 0x128 0x43c 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x128 0x43c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05 0x128 0x43c 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA6__EIM_AD06 0x12c 0x440 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x12c 0x440 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA6__IPU2_CSI1_DATA03 0x12c 0x440 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x12c 0x440 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06 0x12c 0x440 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA7__EIM_AD07 0x130 0x444 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x130 0x444 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA7__IPU2_CSI1_DATA02 0x130 0x444 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x130 0x444 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07 0x130 0x444 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA8__EIM_AD08 0x134 0x448 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x134 0x448 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA8__IPU2_CSI1_DATA01 0x134 0x448 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x134 0x448 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08 0x134 0x448 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA9__EIM_AD09 0x138 0x44c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x138 0x44c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA9__IPU2_CSI1_DATA00 0x138 0x44c 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x138 0x44c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09 0x138 0x44c 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA10__EIM_AD10 0x13c 0x450 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x13c 0x450 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA10__IPU2_CSI1_DATA_EN 0x13c 0x450 0x8d8 0x2 0x1 +#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x13c 0x450 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10 0x13c 0x450 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA11__EIM_AD11 0x140 0x454 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x140 0x454 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA11__IPU2_CSI1_HSYNC 0x140 0x454 0x8dc 0x2 0x1 +#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x140 0x454 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11 0x140 0x454 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA12__EIM_AD12 0x144 0x458 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x144 0x458 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA12__IPU2_CSI1_VSYNC 0x144 0x458 0x8e4 0x2 0x1 +#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x144 0x458 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12 0x144 0x458 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA13__EIM_AD13 0x148 0x45c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x148 0x45c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x148 0x45c 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13 0x148 0x45c 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA14__EIM_AD14 0x14c 0x460 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x14c 0x460 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x14c 0x460 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14 0x14c 0x460 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_DA15__EIM_AD15 0x150 0x464 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01 0x150 0x464 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04 0x150 0x464 0x000 0x2 0x0 +#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x150 0x464 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15 0x150 0x464 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0x154 0x468 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B 0x154 0x468 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x154 0x468 0x000 0x5 0x0 +#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x154 0x468 0x000 0x7 0x0 +#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0x158 0x46c 0x000 0x0 0x0 +#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x158 0x46c 0x000 0x1 0x0 +#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x158 0x46c 0x000 0x5 0x0 +#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x15c 0x470 0x000 0x0 0x0 +#define MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x15c 0x470 0x000 0x1 0x0 +#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x15c 0x470 0x000 0x5 0x0 +#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x160 0x474 0x000 0x0 0x0 +#define MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x160 0x474 0x000 0x1 0x0 +#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x160 0x474 0x000 0x2 0x0 +#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x160 0x474 0x000 0x5 0x0 +#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x164 0x478 0x000 0x0 0x0 +#define MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x164 0x478 0x000 0x1 0x0 +#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x164 0x478 0x000 0x2 0x0 +#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x164 0x478 0x000 0x5 0x0 +#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x168 0x47c 0x000 0x0 0x0 +#define MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x168 0x47c 0x000 0x1 0x0 +#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x168 0x47c 0x000 0x2 0x0 +#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x168 0x47c 0x000 0x5 0x0 +#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x16c 0x480 0x000 0x0 0x0 +#define MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x16c 0x480 0x000 0x1 0x0 +#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x16c 0x480 0x000 0x2 0x0 +#define MX6QDL_PAD_DI0_PIN4__SD1_WP 0x16c 0x480 0x94c 0x3 0x0 +#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x16c 0x480 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x170 0x484 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x170 0x484 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x170 0x484 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x170 0x484 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x174 0x488 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x174 0x488 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x174 0x488 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x174 0x488 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x178 0x48c 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x178 0x48c 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x178 0x48c 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x178 0x48c 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x17c 0x490 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x17c 0x490 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0 0x17c 0x490 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x17c 0x490 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x180 0x494 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x180 0x494 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1 0x180 0x494 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x180 0x494 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x184 0x498 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x184 0x498 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2 0x184 0x498 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS 0x184 0x498 0x000 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x184 0x498 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x188 0x49c 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x188 0x49c 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3 0x188 0x49c 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC 0x188 0x49c 0x000 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x188 0x49c 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x18c 0x4a0 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x18c 0x4a0 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY 0x18c 0x4a0 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x18c 0x4a0 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x190 0x4a4 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x190 0x4a4 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x190 0x4a4 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x190 0x4a4 0x000 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x190 0x4a4 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x194 0x4a8 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x194 0x4a8 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x194 0x4a8 0x000 0x2 0x0 +#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B 0x194 0x4a8 0x000 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x194 0x4a8 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x198 0x4ac 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x198 0x4ac 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x198 0x4ac 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x19c 0x4b0 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x19c 0x4b0 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x19c 0x4b0 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x1a0 0x4b4 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x1a0 0x4b4 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1a0 0x4b4 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x1a4 0x4b8 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x1a4 0x4b8 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS 0x1a4 0x4b8 0x7d8 0x3 0x1 +#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1a4 0x4b8 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x1a8 0x4bc 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x1a8 0x4bc 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC 0x1a8 0x4bc 0x7d4 0x3 0x1 +#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1a8 0x4bc 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x1ac 0x4c0 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x1ac 0x4c0 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1 0x1ac 0x4c0 0x804 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1 0x1ac 0x4c0 0x820 0x3 0x1 +#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1ac 0x4c0 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x1b0 0x4c4 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x1b0 0x4c4 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x1b0 0x4c4 0x818 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x1b0 0x4c4 0x7dc 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x1b0 0x4c4 0x90c 0x4 0x0 +#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0 0x4c4 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x1b4 0x4c8 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x1b4 0x4c8 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x1b4 0x4c8 0x814 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x1b4 0x4c8 0x7d0 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x1b4 0x4c8 0x910 0x4 0x0 +#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b4 0x4c8 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x1b8 0x4cc 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x1b8 0x4cc 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0 0x1b8 0x4cc 0x81c 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x1b8 0x4cc 0x7e0 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS 0x1b8 0x4cc 0x7c0 0x4 0x0 +#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b8 0x4cc 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B 0x1b8 0x4cc 0x000 0x7 0x0 +#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x1bc 0x4d0 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x1bc 0x4d0 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x1bc 0x4d0 0x810 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x1bc 0x4d0 0x7cc 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC 0x1bc 0x4d0 0x7bc 0x4 0x0 +#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1bc 0x4d0 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B 0x1bc 0x4d0 0x000 0x7 0x0 +#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x1c0 0x4d4 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x1c0 0x4d4 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK 0x1c0 0x4d4 0x7f4 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x1c0 0x4d4 0x7c4 0x3 0x0 +#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1c0 0x4d4 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x1c4 0x4d8 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x1c4 0x4d8 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI 0x1c4 0x4d8 0x7fc 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x1c4 0x4d8 0x7b8 0x3 0x1 +#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1c4 0x4d8 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x1c8 0x4dc 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x1c8 0x4dc 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO 0x1c8 0x4dc 0x7f8 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x1c8 0x4dc 0x7c8 0x3 0x1 +#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1c8 0x4dc 0x000 0x5 0x0 +#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x1cc 0x4e0 0x000 0x0 0x0 +#define MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x1cc 0x4e0 0x000 0x1 0x0 +#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0 0x1cc 0x4e0 0x800 0x2 0x1 +#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x1cc 0x4e0 0x7b4 0x3 0x1 +#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1cc 0x4e0 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1d0 0x4e4 0x840 0x1 0x0 +#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1d0 0x4e4 0x86c 0x2 0x0 +#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1d0 0x4e4 0x000 0x4 0x0 +#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22 0x1d0 0x4e4 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK 0x1d0 0x4e4 0x000 0x6 0x0 +#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1d4 0x4e8 0x000 0x1 0x0 +#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1d4 0x4e8 0x85c 0x2 0x0 +#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1d4 0x4e8 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1d4 0x4e8 0x000 0x6 0x0 +#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x000 0x0 0x0 +#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1d8 0x4ec 0x000 0x1 0x0 +#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1d8 0x4ec 0x864 0x2 0x0 +#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN 0x1d8 0x4ec 0x914 0x3 0x1 +#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0 +#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1d8 0x4ec 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1dc 0x4f0 0x858 0x1 0x1 +#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1dc 0x4f0 0x870 0x2 0x0 +#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1dc 0x4f0 0x918 0x3 0x1 +#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1dc 0x4f0 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_RXD1__MLB_SIG 0x1e0 0x4f4 0x908 0x0 0x0 +#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1e0 0x4f4 0x84c 0x1 0x1 +#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1e0 0x4f4 0x860 0x2 0x0 +#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1e0 0x4f4 0x000 0x4 0x0 +#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1e0 0x4f4 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1e4 0x4f8 0x848 0x1 0x1 +#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1e4 0x4f8 0x868 0x2 0x0 +#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1e4 0x4f8 0x000 0x3 0x0 +#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1e4 0x4f8 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1e8 0x4fc 0x000 0x1 0x0 +#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1e8 0x4fc 0x880 0x2 0x0 +#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1e8 0x4fc 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_TXD1__MLB_CLK 0x1ec 0x500 0x900 0x0 0x0 +#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1ec 0x500 0x000 0x1 0x0 +#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3 0x1ec 0x500 0x87c 0x2 0x0 +#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x1ec 0x500 0x000 0x4 0x0 +#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1ec 0x500 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1f0 0x504 0x000 0x1 0x0 +#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1f0 0x504 0x884 0x2 0x0 +#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1f0 0x504 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_MDC__MLB_DATA 0x1f4 0x508 0x904 0x0 0x0 +#define MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1f4 0x508 0x000 0x1 0x0 +#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1f4 0x508 0x888 0x2 0x0 +#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1f4 0x508 0x000 0x4 0x0 +#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31 0x1f4 0x508 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x1f8 0x5c8 0x7f4 0x0 0x2 +#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x1f8 0x5c8 0x854 0x1 0x1 +#define MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x1f8 0x5c8 0x7dc 0x2 0x1 +#define MX6QDL_PAD_KEY_COL0__KEY_COL0 0x1f8 0x5c8 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1f8 0x5c8 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1f8 0x5c8 0x938 0x4 0x0 +#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1f8 0x5c8 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT 0x1f8 0x5c8 0x000 0x6 0x0 +#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x1fc 0x5cc 0x7fc 0x0 0x2 +#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x1fc 0x5cc 0x000 0x1 0x0 +#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x1fc 0x5cc 0x7d0 0x2 0x1 +#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0 0x1fc 0x5cc 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1fc 0x5cc 0x938 0x4 0x1 +#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1fc 0x5cc 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1fc 0x5cc 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT 0x1fc 0x5cc 0x000 0x6 0x0 +#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x200 0x5d0 0x7f8 0x0 0x2 +#define MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x200 0x5d0 0x840 0x1 0x1 +#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x200 0x5d0 0x7e0 0x2 0x1 +#define MX6QDL_PAD_KEY_COL1__KEY_COL1 0x200 0x5d0 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x200 0x5d0 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x200 0x5d0 0x940 0x4 0x0 +#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x200 0x5d0 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT 0x200 0x5d0 0x000 0x6 0x0 +#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x204 0x5d4 0x800 0x0 0x2 +#define MX6QDL_PAD_KEY_ROW1__ENET_COL 0x204 0x5d4 0x000 0x1 0x0 +#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x204 0x5d4 0x7cc 0x2 0x1 +#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x204 0x5d4 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x204 0x5d4 0x940 0x4 0x1 +#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x204 0x5d4 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x204 0x5d4 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x204 0x5d4 0x000 0x6 0x0 +#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1 0x208 0x5d8 0x804 0x0 0x2 +#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x208 0x5d8 0x850 0x1 0x1 +#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x208 0x5d8 0x000 0x2 0x0 +#define MX6QDL_PAD_KEY_COL2__KEY_COL2 0x208 0x5d8 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_COL2__ENET_MDC 0x208 0x5d8 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x208 0x5d8 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x208 0x5d8 0x000 0x6 0x0 +#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2 0x20c 0x5dc 0x808 0x0 0x1 +#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x20c 0x5dc 0x000 0x1 0x0 +#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x20c 0x5dc 0x7e4 0x2 0x0 +#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x20c 0x5dc 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT 0x20c 0x5dc 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x20c 0x5dc 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x20c 0x5dc 0x88c 0x6 0x1 +#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3 0x210 0x5e0 0x80c 0x0 0x1 +#define MX6QDL_PAD_KEY_COL3__ENET_CRS 0x210 0x5e0 0x000 0x1 0x0 +#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x210 0x5e0 0x890 0x2 0x1 +#define MX6QDL_PAD_KEY_COL3__KEY_COL3 0x210 0x5e0 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x210 0x5e0 0x8a0 0x4 0x1 +#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x210 0x5e0 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x210 0x5e0 0x914 0x6 0x2 +#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK 0x214 0x5e4 0x7b0 0x1 0x0 +#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x214 0x5e4 0x894 0x2 0x1 +#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x214 0x5e4 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x214 0x5e4 0x8a4 0x4 0x1 +#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x214 0x5e4 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT 0x214 0x5e4 0x000 0x6 0x0 +#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x218 0x5e8 0x000 0x0 0x0 +#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4 0x218 0x5e8 0x000 0x1 0x0 +#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x218 0x5e8 0x944 0x2 0x1 +#define MX6QDL_PAD_KEY_COL4__KEY_COL4 0x218 0x5e8 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B 0x218 0x5e8 0x93c 0x4 0x0 +#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B 0x218 0x5e8 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x218 0x5e8 0x000 0x5 0x0 +#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x21c 0x5ec 0x7e8 0x0 0x0 +#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5 0x21c 0x5ec 0x000 0x1 0x0 +#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x21c 0x5ec 0x000 0x2 0x0 +#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4 0x21c 0x5ec 0x000 0x3 0x0 +#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B 0x21c 0x5ec 0x000 0x4 0x0 +#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B 0x21c 0x5ec 0x93c 0x4 0x1 +#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x21c 0x5ec 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x220 0x5f0 0x000 0x0 0x0 +#define MX6QDL_PAD_GPIO_0__KEY_COL5 0x220 0x5f0 0x8e8 0x2 0x0 +#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK 0x220 0x5f0 0x7b0 0x3 0x1 +#define MX6QDL_PAD_GPIO_0__EPIT1_OUT 0x220 0x5f0 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x220 0x5f0 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x220 0x5f0 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5 0x220 0x5f0 0x000 0x7 0x0 +#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK 0x224 0x5f4 0x86c 0x0 0x1 +#define MX6QDL_PAD_GPIO_1__WDOG2_B 0x224 0x5f4 0x000 0x1 0x0 +#define MX6QDL_PAD_GPIO_1__KEY_ROW5 0x224 0x5f4 0x8f4 0x2 0x0 +#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_1__PWM2_OUT 0x224 0x5f4 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x224 0x5f4 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_1__SD1_CD_B 0x224 0x5f4 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x228 0x5f8 0x85c 0x0 0x1 +#define MX6QDL_PAD_GPIO_9__WDOG1_B 0x228 0x5f8 0x000 0x1 0x0 +#define MX6QDL_PAD_GPIO_9__KEY_COL6 0x228 0x5f8 0x8ec 0x2 0x0 +#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B 0x228 0x5f8 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_9__PWM1_OUT 0x228 0x5f8 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x228 0x5f8 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_9__SD1_WP 0x228 0x5f8 0x94c 0x6 0x1 +#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK 0x22c 0x5fc 0x864 0x0 0x1 +#define MX6QDL_PAD_GPIO_3__I2C3_SCL 0x22c 0x5fc 0x8a8 0x2 0x1 +#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x22c 0x5fc 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x22c 0x5fc 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x22c 0x5fc 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_3__USB_H1_OC 0x22c 0x5fc 0x948 0x6 0x1 +#define MX6QDL_PAD_GPIO_3__MLB_CLK 0x22c 0x5fc 0x900 0x7 0x1 +#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK 0x230 0x600 0x870 0x0 0x1 +#define MX6QDL_PAD_GPIO_6__I2C3_SDA 0x230 0x600 0x8ac 0x2 0x1 +#define MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x230 0x600 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_6__SD2_LCTL 0x230 0x600 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_6__MLB_SIG 0x230 0x600 0x908 0x7 0x1 +#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS 0x234 0x604 0x860 0x0 0x1 +#define MX6QDL_PAD_GPIO_2__KEY_ROW6 0x234 0x604 0x8f8 0x2 0x1 +#define MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x234 0x604 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_2__SD2_WP 0x234 0x604 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_2__MLB_DATA 0x234 0x604 0x904 0x7 0x1 +#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK 0x238 0x608 0x868 0x0 0x1 +#define MX6QDL_PAD_GPIO_4__KEY_COL7 0x238 0x608 0x8f0 0x2 0x1 +#define MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x238 0x608 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_4__SD2_CD_B 0x238 0x608 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x23c 0x60c 0x87c 0x0 0x1 +#define MX6QDL_PAD_GPIO_5__KEY_ROW7 0x23c 0x60c 0x8fc 0x2 0x1 +#define MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x23c 0x60c 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x23c 0x60c 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_5__I2C3_SCL 0x23c 0x60c 0x8a8 0x6 0x2 +#define MX6QDL_PAD_GPIO_5__ARM_EVENTI 0x23c 0x60c 0x000 0x7 0x0 +#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1 0x240 0x610 0x884 0x0 0x1 +#define MX6QDL_PAD_GPIO_7__ECSPI5_RDY 0x240 0x610 0x000 0x1 0x0 +#define MX6QDL_PAD_GPIO_7__EPIT1_OUT 0x240 0x610 0x000 0x2 0x0 +#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x240 0x610 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x240 0x610 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA 0x240 0x610 0x928 0x4 0x2 +#define MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x240 0x610 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK 0x240 0x610 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE 0x240 0x610 0x000 0x7 0x0 +#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0 0x244 0x614 0x888 0x0 0x1 +#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x244 0x614 0x000 0x1 0x0 +#define MX6QDL_PAD_GPIO_8__EPIT2_OUT 0x244 0x614 0x000 0x2 0x0 +#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x244 0x614 0x7e4 0x3 0x1 +#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x244 0x614 0x928 0x4 0x3 +#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA 0x244 0x614 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x244 0x614 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK 0x244 0x614 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x244 0x614 0x000 0x7 0x0 +#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2 0x248 0x618 0x880 0x0 0x1 +#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x248 0x618 0x000 0x1 0x0 +#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x248 0x618 0x83c 0x2 0x1 +#define MX6QDL_PAD_GPIO_16__SD1_LCTL 0x248 0x618 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_16__SPDIF_IN 0x248 0x618 0x914 0x4 0x3 +#define MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x248 0x618 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_16__I2C3_SDA 0x248 0x618 0x8ac 0x6 0x2 +#define MX6QDL_PAD_GPIO_16__JTAG_DE_B 0x248 0x618 0x000 0x7 0x0 +#define MX6QDL_PAD_GPIO_17__ESAI_TX0 0x24c 0x61c 0x874 0x0 0x0 +#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x24c 0x61c 0x000 0x1 0x0 +#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY 0x24c 0x61c 0x7f0 0x2 0x1 +#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0 0x24c 0x61c 0x90c 0x3 0x1 +#define MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x24c 0x61c 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x24c 0x61c 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_18__ESAI_TX1 0x250 0x620 0x878 0x0 0x0 +#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x250 0x620 0x844 0x1 0x1 +#define MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x250 0x620 0x000 0x2 0x0 +#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1 0x250 0x620 0x910 0x3 0x1 +#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK 0x250 0x620 0x7b0 0x4 0x2 +#define MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x250 0x620 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL 0x250 0x620 0x000 0x6 0x0 +#define MX6QDL_PAD_GPIO_19__KEY_COL5 0x254 0x624 0x8e8 0x0 0x1 +#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x254 0x624 0x000 0x1 0x0 +#define MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x254 0x624 0x000 0x2 0x0 +#define MX6QDL_PAD_GPIO_19__CCM_CLKO1 0x254 0x624 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x254 0x624 0x000 0x4 0x0 +#define MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x254 0x624 0x000 0x5 0x0 +#define MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x254 0x624 0x000 0x6 0x0 +#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x258 0x628 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x258 0x628 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x258 0x628 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x25c 0x62c 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x25c 0x62c 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x25c 0x62c 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x25c 0x62c 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x260 0x630 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x260 0x630 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x260 0x630 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x260 0x630 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x264 0x634 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x264 0x634 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x264 0x634 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x264 0x634 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x268 0x638 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x268 0x638 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x268 0x638 0x7f4 0x2 0x3 +#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5 0x268 0x638 0x8e8 0x3 0x2 +#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x268 0x638 0x000 0x4 0x0 +#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x268 0x638 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x268 0x638 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x26c 0x63c 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x26c 0x63c 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x26c 0x63c 0x7fc 0x2 0x3 +#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5 0x26c 0x63c 0x8f4 0x3 0x1 +#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x26c 0x63c 0x000 0x4 0x0 +#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x26c 0x63c 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x26c 0x63c 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x270 0x640 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x270 0x640 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x270 0x640 0x7f8 0x2 0x3 +#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6 0x270 0x640 0x8ec 0x3 0x1 +#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x270 0x640 0x000 0x4 0x0 +#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24 0x270 0x640 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x270 0x640 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x274 0x644 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x274 0x644 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0 0x274 0x644 0x800 0x2 0x3 +#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6 0x274 0x644 0x8f8 0x3 0x2 +#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x274 0x644 0x000 0x4 0x0 +#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x274 0x644 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x274 0x644 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x278 0x648 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x278 0x648 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x278 0x648 0x810 0x2 0x2 +#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7 0x278 0x648 0x8f0 0x3 0x2 +#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x278 0x648 0x89c 0x4 0x1 +#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x278 0x648 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x278 0x648 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x27c 0x64c 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x27c 0x64c 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x27c 0x64c 0x818 0x2 0x2 +#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7 0x27c 0x64c 0x8fc 0x3 0x2 +#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x27c 0x64c 0x898 0x4 0x1 +#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x27c 0x64c 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x27c 0x64c 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x280 0x650 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC 0x280 0x650 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x280 0x650 0x814 0x2 0x2 +#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x280 0x650 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x280 0x650 0x920 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x280 0x650 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x280 0x650 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x284 0x654 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS 0x284 0x654 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0 0x284 0x654 0x81c 0x2 0x2 +#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x284 0x654 0x920 0x3 0x1 +#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x284 0x654 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x284 0x654 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x284 0x654 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x288 0x658 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x288 0x658 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x288 0x658 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA 0x288 0x658 0x938 0x3 0x2 +#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x288 0x658 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x288 0x658 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x28c 0x65c 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x28c 0x65c 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x28c 0x65c 0x938 0x3 0x3 +#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA 0x28c 0x65c 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x28c 0x65c 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x28c 0x65c 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x290 0x660 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x290 0x660 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x290 0x660 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA 0x290 0x660 0x940 0x3 0x2 +#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x290 0x660 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x290 0x660 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x294 0x664 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x294 0x664 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x294 0x664 0x940 0x3 0x3 +#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA 0x294 0x664 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x294 0x664 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x294 0x664 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x298 0x668 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x298 0x668 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x298 0x668 0x934 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B 0x298 0x668 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x298 0x668 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x298 0x668 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x29c 0x66c 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x29c 0x66c 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x29c 0x66c 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B 0x29c 0x66c 0x934 0x3 0x1 +#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x29c 0x66c 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x29c 0x66c 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x2a0 0x670 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x2a0 0x670 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x2a0 0x670 0x93c 0x3 0x2 +#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B 0x2a0 0x670 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x2a0 0x670 0x000 0x5 0x0 +#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x2a0 0x670 0x000 0x7 0x0 +#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x2a4 0x674 0x000 0x0 0x0 +#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x2a4 0x674 0x000 0x1 0x0 +#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x2a4 0x674 0x000 0x3 0x0 +#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B 0x2a4 0x674 0x93c 0x3 0x3 +#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x2a4 0x674 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x2a8 0x690 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x2a8 0x690 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA 0x2a8 0x690 0x920 0x1 0x2 +#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x2a8 0x690 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x2ac 0x694 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x2ac 0x694 0x920 0x1 0x3 +#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA 0x2ac 0x694 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x2ac 0x694 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x2b0 0x698 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x2b0 0x698 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA 0x2b0 0x698 0x928 0x1 0x4 +#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x2b0 0x698 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x2b4 0x69c 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x2b4 0x69c 0x928 0x1 0x5 +#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA 0x2b4 0x69c 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x2b4 0x69c 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_CMD__SD3_CMD 0x2b8 0x6a0 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x2b8 0x6a0 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B 0x2b8 0x6a0 0x924 0x1 0x2 +#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x2b8 0x6a0 0x000 0x2 0x0 +#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x2b8 0x6a0 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_CLK__SD3_CLK 0x2bc 0x6a4 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x2bc 0x6a4 0x924 0x1 0x3 +#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B 0x2bc 0x6a4 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x2bc 0x6a4 0x7e4 0x2 0x2 +#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x2bc 0x6a4 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x2c0 0x6a8 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x2c0 0x6a8 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B 0x2c0 0x6a8 0x91c 0x1 0x2 +#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x2c0 0x6a8 0x000 0x2 0x0 +#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04 0x2c0 0x6a8 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x2c4 0x6ac 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x2c4 0x6ac 0x91c 0x1 0x3 +#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B 0x2c4 0x6ac 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x2c4 0x6ac 0x7e8 0x2 0x1 +#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05 0x2c4 0x6ac 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x2c8 0x6b0 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x2c8 0x6b0 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x2cc 0x6b4 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x2cc 0x6b4 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B 0x2cc 0x6b4 0x92c 0x1 0x4 +#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07 0x2cc 0x6b4 0x000 0x5 0x0 +#define MX6QDL_PAD_SD3_RST__SD3_RESET 0x2d0 0x6b8 0x000 0x0 0x0 +#define MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x2d0 0x6b8 0x92c 0x1 0x5 +#define MX6QDL_PAD_SD3_RST__UART3_CTS_B 0x2d0 0x6b8 0x000 0x1 0x0 +#define MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x2d0 0x6b8 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x2d4 0x6bc 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_CLE__IPU2_SISG4 0x2d4 0x6bc 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x2d4 0x6bc 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x2d8 0x6c0 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x2d8 0x6c0 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x2d8 0x6c0 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x2dc 0x6c4 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_WP_B__IPU2_SISG5 0x2dc 0x6c4 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x2dc 0x6c4 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x2e0 0x6c8 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_RB0__IPU2_DI0_PIN01 0x2e0 0x6c8 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x2e0 0x6c8 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x2e4 0x6cc 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x2e4 0x6cc 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0x2e8 0x6d0 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT 0x2e8 0x6d0 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x2e8 0x6d0 0x000 0x2 0x0 +#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x2e8 0x6d0 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B 0x2ec 0x6d4 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0 0x2ec 0x6d4 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0 0x2ec 0x6d4 0x874 0x2 0x1 +#define MX6QDL_PAD_NANDF_CS2__EIM_CRE 0x2ec 0x6d4 0x000 0x3 0x0 +#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x2ec 0x6d4 0x000 0x4 0x0 +#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x2ec 0x6d4 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_CS2__IPU2_SISG0 0x2ec 0x6d4 0x000 0x6 0x0 +#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B 0x2f0 0x6d8 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1 0x2f0 0x6d8 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x2f0 0x6d8 0x878 0x2 0x1 +#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26 0x2f0 0x6d8 0x000 0x3 0x0 +#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x2f0 0x6d8 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_CS3__IPU2_SISG1 0x2f0 0x6d8 0x000 0x6 0x0 +#define MX6QDL_PAD_SD4_CMD__SD4_CMD 0x2f4 0x6dc 0x000 0x0 0x0 +#define MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x2f4 0x6dc 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x2f4 0x6dc 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x2f4 0x6dc 0x930 0x2 0x2 +#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x2f4 0x6dc 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_CLK__SD4_CLK 0x2f8 0x6e0 0x000 0x0 0x0 +#define MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x2f8 0x6e0 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x2f8 0x6e0 0x930 0x2 0x3 +#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x2f8 0x6e0 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x2f8 0x6e0 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x2fc 0x6e4 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x2fc 0x6e4 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x2fc 0x6e4 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x300 0x6e8 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x300 0x6e8 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x300 0x6e8 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x304 0x6ec 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x304 0x6ec 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x304 0x6ec 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x308 0x6f0 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x308 0x6f0 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x308 0x6f0 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x30c 0x6f4 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x30c 0x6f4 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x30c 0x6f4 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x310 0x6f8 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x310 0x6f8 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x310 0x6f8 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x314 0x6fc 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x314 0x6fc 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x314 0x6fc 0x000 0x5 0x0 +#define MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x318 0x700 0x000 0x0 0x0 +#define MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x318 0x700 0x000 0x1 0x0 +#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x318 0x700 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x31c 0x704 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x31c 0x704 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x31c 0x704 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x320 0x708 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x320 0x708 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x320 0x708 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x324 0x70c 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x324 0x70c 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x324 0x70c 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x328 0x710 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x328 0x710 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x32c 0x714 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x32c 0x714 0x928 0x2 0x6 +#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x32c 0x714 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x32c 0x714 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x330 0x718 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x330 0x718 0x924 0x2 0x4 +#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x330 0x718 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x330 0x718 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x334 0x71c 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x334 0x71c 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x334 0x71c 0x924 0x2 0x5 +#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14 0x334 0x71c 0x000 0x5 0x0 +#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x338 0x720 0x000 0x1 0x0 +#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x338 0x720 0x000 0x2 0x0 +#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x338 0x720 0x928 0x2 0x7 +#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x338 0x720 0x000 0x5 0x0 +#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x33c 0x724 0x000 0x0 0x0 +#define MX6QDL_PAD_SD1_DAT1__ECSPI5_SS0 0x33c 0x724 0x834 0x1 0x1 +#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x33c 0x724 0x000 0x2 0x0 +#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2 0x33c 0x724 0x000 0x3 0x0 +#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x33c 0x724 0x000 0x5 0x0 +#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x340 0x728 0x000 0x0 0x0 +#define MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x340 0x728 0x82c 0x1 0x1 +#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1 0x340 0x728 0x000 0x3 0x0 +#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x340 0x728 0x000 0x5 0x0 +#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x344 0x72c 0x000 0x0 0x0 +#define MX6QDL_PAD_SD1_DAT3__ECSPI5_SS2 0x344 0x72c 0x000 0x1 0x0 +#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3 0x344 0x72c 0x000 0x2 0x0 +#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x344 0x72c 0x000 0x3 0x0 +#define MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x344 0x72c 0x000 0x4 0x0 +#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x344 0x72c 0x000 0x5 0x0 +#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x344 0x72c 0x000 0x6 0x0 +#define MX6QDL_PAD_SD1_CMD__SD1_CMD 0x348 0x730 0x000 0x0 0x0 +#define MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x348 0x730 0x830 0x1 0x0 +#define MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x348 0x730 0x000 0x2 0x0 +#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1 0x348 0x730 0x000 0x3 0x0 +#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x348 0x730 0x000 0x5 0x0 +#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x34c 0x734 0x000 0x0 0x0 +#define MX6QDL_PAD_SD1_DAT2__ECSPI5_SS1 0x34c 0x734 0x838 0x1 0x1 +#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2 0x34c 0x734 0x000 0x2 0x0 +#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x34c 0x734 0x000 0x3 0x0 +#define MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x34c 0x734 0x000 0x4 0x0 +#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x34c 0x734 0x000 0x5 0x0 +#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x34c 0x734 0x000 0x6 0x0 +#define MX6QDL_PAD_SD1_CLK__SD1_CLK 0x350 0x738 0x000 0x0 0x0 +#define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x350 0x738 0x828 0x1 0x0 +#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN 0x350 0x738 0x000 0x3 0x0 +#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x350 0x738 0x000 0x5 0x0 +#define MX6QDL_PAD_SD2_CLK__SD2_CLK 0x354 0x73c 0x000 0x0 0x0 +#define MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK 0x354 0x73c 0x828 0x1 0x1 +#define MX6QDL_PAD_SD2_CLK__KEY_COL5 0x354 0x73c 0x8e8 0x2 0x3 +#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS 0x354 0x73c 0x7c0 0x3 0x1 +#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x354 0x73c 0x000 0x5 0x0 +#define MX6QDL_PAD_SD2_CMD__SD2_CMD 0x358 0x740 0x000 0x0 0x0 +#define MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI 0x358 0x740 0x830 0x1 0x1 +#define MX6QDL_PAD_SD2_CMD__KEY_ROW5 0x358 0x740 0x8f4 0x2 0x2 +#define MX6QDL_PAD_SD2_CMD__AUD4_RXC 0x358 0x740 0x7bc 0x3 0x1 +#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x358 0x740 0x000 0x5 0x0 +#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x35c 0x744 0x000 0x0 0x0 +#define MX6QDL_PAD_SD2_DAT3__ECSPI5_SS3 0x35c 0x744 0x000 0x1 0x0 +#define MX6QDL_PAD_SD2_DAT3__KEY_COL6 0x35c 0x744 0x8ec 0x2 0x2 +#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x35c 0x744 0x7c4 0x3 0x1 +#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x35c 0x744 0x000 0x5 0x0 #endif /* __DTS_IMX6Q_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts index 09a75807bc6d2190fecbf1fb1f251978c8e8197e..334b9247e78cefff1e5e30e4d033cad89c5d5d11 100644 --- a/arch/arm/boot/dts/imx6q-sabreauto.dts +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts @@ -20,24 +20,6 @@ compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; }; -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6Q_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 - MX6Q_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 - >; - }; - }; - - ecspi1 { - pinctrl_ecspi1_sabreauto: ecspi1-sabreauto { - fsl,pins = < - MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 - >; - }; - }; +&sata { + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 6a000666c147fe5b01512dedcba9d320cfbf2b3a..3530280f5150e43d826987ab225e4b53930b33aa 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -65,6 +65,10 @@ }; }; +&sata { + status = "okay"; +}; + &ecspi1 { fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; @@ -91,14 +95,14 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - MX6Q_PAD_NANDF_D6__GPIO2_IO06 0x80000000 - MX6Q_PAD_NANDF_D7__GPIO2_IO07 0x80000000 - MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 - MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 - MX6Q_PAD_EIM_D23__GPIO3_IO23 0x80000000 - MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 - MX6Q_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 - MX6Q_PAD_GPIO_0__CCM_CLKO1 0x80000000 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000 >; }; }; @@ -163,7 +167,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 169>; + clocks = <&clks 201>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index 0038228c508cb2dd64a96ce30ee9e8512b1182ed..9cbdfe7a0931ff4fa8c09db3c9ea0fa3bb397609 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -20,21 +20,6 @@ compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; }; -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6Q_PAD_GPIO_4__GPIO1_IO04 0x80000000 - MX6Q_PAD_GPIO_5__GPIO1_IO05 0x80000000 - MX6Q_PAD_NANDF_D0__GPIO2_IO00 0x80000000 - MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x80000000 - MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x80000000 - MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x80000000 - MX6Q_PAD_GPIO_0__CCM_CLKO1 0x130b0 - >; - }; - }; +&sata { + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts new file mode 100644 index 0000000000000000000000000000000000000000..36be17f207b14c95396c5b2bb3b7e7a35c113744 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-wandboard.dts @@ -0,0 +1,26 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-wandboard.dtsi" + +/ { + model = "Wandboard i.MX6 Quad Board"; + compatible = "wand,imx6q-wandboard", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index ba09dc32324e7a5c182880f099e6a6a3fe638f9d..f024ef28b34b9373895dbbb913c475eebb33298a 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -8,8 +8,8 @@ * */ -#include "imx6qdl.dtsi" #include "imx6q-pinfunc.h" +#include "imx6qdl.dtsi" / { cpus { @@ -61,6 +61,12 @@ }; soc { + ocram: sram@00900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x40000>; + clocks = <&clks 142>; + }; + aips-bus@02000000 { /* AIPS1 */ spba-bus@02000000 { ecspi5: ecspi@02018000 { @@ -77,357 +83,54 @@ iomuxc: iomuxc@020e0000 { compatible = "fsl,imx6q-iomuxc"; - reg = <0x020e0000 0x4000>; - - /* shared pinctrl settings */ - audmux { - pinctrl_audmux_1: audmux-1 { - fsl,pins = < - MX6Q_PAD_SD2_DAT0__AUD4_RXD 0x80000000 - MX6Q_PAD_SD2_DAT3__AUD4_TXC 0x80000000 - MX6Q_PAD_SD2_DAT2__AUD4_TXD 0x80000000 - MX6Q_PAD_SD2_DAT1__AUD4_TXFS 0x80000000 - >; - }; - - pinctrl_audmux_2: audmux-2 { - fsl,pins = < - MX6Q_PAD_CSI0_DAT7__AUD3_RXD 0x80000000 - MX6Q_PAD_CSI0_DAT4__AUD3_TXC 0x80000000 - MX6Q_PAD_CSI0_DAT5__AUD3_TXD 0x80000000 - MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000 - >; - }; - }; - - ecspi1 { - pinctrl_ecspi1_1: ecspi1grp-1 { - fsl,pins = < - MX6Q_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6Q_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6Q_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - >; - }; - }; - - ecspi3 { - pinctrl_ecspi3_1: ecspi3grp-1 { - fsl,pins = < - MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 - MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 - MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 - >; - }; - }; - - enet { - pinctrl_enet_1: enetgrp-1 { - fsl,pins = < - MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6Q_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6Q_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; - - pinctrl_enet_2: enetgrp-2 { - fsl,pins = < - MX6Q_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 - MX6Q_PAD_KEY_COL2__ENET_MDC 0x1b0b0 - MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - >; - }; - - pinctrl_enet_3: enetgrp-3 { - fsl,pins = < - MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6Q_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6Q_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 - >; - }; - }; - - gpmi-nand { - pinctrl_gpmi_nand_1: gpmi-nand-1 { - fsl,pins = < - MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; - }; - - i2c1 { - pinctrl_i2c1_1: i2c1grp-1 { - fsl,pins = < - MX6Q_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6Q_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - pinctrl_i2c1_2: i2c1grp-2 { - fsl,pins = < - MX6Q_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - MX6Q_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 - >; - }; - }; - - i2c2 { - pinctrl_i2c2_1: i2c2grp-1 { - fsl,pins = < - MX6Q_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 - MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + ipu2 { + pinctrl_ipu2_1: ipu2grp-1 { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x10 + MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x80000000 + MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x10 >; }; }; - - i2c3 { - pinctrl_i2c3_1: i2c3grp-1 { - fsl,pins = < - MX6Q_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 - MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - >; - }; - }; - - uart1 { - pinctrl_uart1_1: uart1grp-1 { - fsl,pins = < - MX6Q_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; - }; - - uart2 { - pinctrl_uart2_1: uart2grp-1 { - fsl,pins = < - MX6Q_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; - }; - - uart4 { - pinctrl_uart4_1: uart4grp-1 { - fsl,pins = < - MX6Q_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6Q_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; - }; - - usbotg { - pinctrl_usbotg_1: usbotggrp-1 { - fsl,pins = < - MX6Q_PAD_GPIO_1__USB_OTG_ID 0x17059 - >; - }; - - pinctrl_usbotg_2: usbotggrp-2 { - fsl,pins = < - MX6Q_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - >; - }; - }; - - usdhc2 { - pinctrl_usdhc2_1: usdhc2grp-1 { - fsl,pins = < - MX6Q_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6Q_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6Q_PAD_NANDF_D4__SD2_DATA4 0x17059 - MX6Q_PAD_NANDF_D5__SD2_DATA5 0x17059 - MX6Q_PAD_NANDF_D6__SD2_DATA6 0x17059 - MX6Q_PAD_NANDF_D7__SD2_DATA7 0x17059 - >; - }; - - pinctrl_usdhc2_2: usdhc2grp-2 { - fsl,pins = < - MX6Q_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6Q_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; - }; - - usdhc3 { - pinctrl_usdhc3_1: usdhc3grp-1 { - fsl,pins = < - MX6Q_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6Q_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6Q_PAD_SD3_DAT4__SD3_DATA4 0x17059 - MX6Q_PAD_SD3_DAT5__SD3_DATA5 0x17059 - MX6Q_PAD_SD3_DAT6__SD3_DATA6 0x17059 - MX6Q_PAD_SD3_DAT7__SD3_DATA7 0x17059 - >; - }; - - pinctrl_usdhc3_2: usdhc3grp-2 { - fsl,pins = < - MX6Q_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6Q_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; - }; - - usdhc4 { - pinctrl_usdhc4_1: usdhc4grp-1 { - fsl,pins = < - MX6Q_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6Q_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6Q_PAD_SD4_DAT4__SD4_DATA4 0x17059 - MX6Q_PAD_SD4_DAT5__SD4_DATA5 0x17059 - MX6Q_PAD_SD4_DAT6__SD4_DATA6 0x17059 - MX6Q_PAD_SD4_DAT7__SD4_DATA7 0x17059 - >; - }; - - pinctrl_usdhc4_2: usdhc4grp-2 { - fsl,pins = < - MX6Q_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6Q_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059 - >; - }; - }; - - weim { - pinctrl_weim_cs0_1: weim_cs0grp-1 { - fsl,pins = < - MX6Q_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 - >; - }; - - pinctrl_weim_nor_1: weimnorgrp-1 { - fsl,pins = < - MX6Q_PAD_EIM_OE__EIM_OE_B 0xb0b1 - MX6Q_PAD_EIM_RW__EIM_RW 0xb0b1 - MX6Q_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 - /* data */ - MX6Q_PAD_EIM_D16__EIM_DATA16 0x1b0b0 - MX6Q_PAD_EIM_D17__EIM_DATA17 0x1b0b0 - MX6Q_PAD_EIM_D18__EIM_DATA18 0x1b0b0 - MX6Q_PAD_EIM_D19__EIM_DATA19 0x1b0b0 - MX6Q_PAD_EIM_D20__EIM_DATA20 0x1b0b0 - MX6Q_PAD_EIM_D21__EIM_DATA21 0x1b0b0 - MX6Q_PAD_EIM_D22__EIM_DATA22 0x1b0b0 - MX6Q_PAD_EIM_D23__EIM_DATA23 0x1b0b0 - MX6Q_PAD_EIM_D24__EIM_DATA24 0x1b0b0 - MX6Q_PAD_EIM_D25__EIM_DATA25 0x1b0b0 - MX6Q_PAD_EIM_D26__EIM_DATA26 0x1b0b0 - MX6Q_PAD_EIM_D27__EIM_DATA27 0x1b0b0 - MX6Q_PAD_EIM_D28__EIM_DATA28 0x1b0b0 - MX6Q_PAD_EIM_D29__EIM_DATA29 0x1b0b0 - MX6Q_PAD_EIM_D30__EIM_DATA30 0x1b0b0 - MX6Q_PAD_EIM_D31__EIM_DATA31 0x1b0b0 - /* address */ - MX6Q_PAD_EIM_A23__EIM_ADDR23 0xb0b1 - MX6Q_PAD_EIM_A22__EIM_ADDR22 0xb0b1 - MX6Q_PAD_EIM_A21__EIM_ADDR21 0xb0b1 - MX6Q_PAD_EIM_A20__EIM_ADDR20 0xb0b1 - MX6Q_PAD_EIM_A19__EIM_ADDR19 0xb0b1 - MX6Q_PAD_EIM_A18__EIM_ADDR18 0xb0b1 - MX6Q_PAD_EIM_A17__EIM_ADDR17 0xb0b1 - MX6Q_PAD_EIM_A16__EIM_ADDR16 0xb0b1 - MX6Q_PAD_EIM_DA15__EIM_AD15 0xb0b1 - MX6Q_PAD_EIM_DA14__EIM_AD14 0xb0b1 - MX6Q_PAD_EIM_DA13__EIM_AD13 0xb0b1 - MX6Q_PAD_EIM_DA12__EIM_AD12 0xb0b1 - MX6Q_PAD_EIM_DA11__EIM_AD11 0xb0b1 - MX6Q_PAD_EIM_DA10__EIM_AD10 0xb0b1 - MX6Q_PAD_EIM_DA9__EIM_AD09 0xb0b1 - MX6Q_PAD_EIM_DA8__EIM_AD08 0xb0b1 - MX6Q_PAD_EIM_DA7__EIM_AD07 0xb0b1 - MX6Q_PAD_EIM_DA6__EIM_AD06 0xb0b1 - MX6Q_PAD_EIM_DA5__EIM_AD05 0xb0b1 - MX6Q_PAD_EIM_DA4__EIM_AD04 0xb0b1 - MX6Q_PAD_EIM_DA3__EIM_AD03 0xb0b1 - MX6Q_PAD_EIM_DA2__EIM_AD02 0xb0b1 - MX6Q_PAD_EIM_DA1__EIM_AD01 0xb0b1 - MX6Q_PAD_EIM_DA0__EIM_AD00 0xb0b1 - >; - }; - - }; }; }; + sata: sata@02200000 { + compatible = "fsl,imx6q-ahci"; + reg = <0x02200000 0x4000>; + interrupts = <0 39 0x04>; + clocks = <&clks 154>, <&clks 187>, <&clks 105>; + clock-names = "sata", "sata_ref", "ahb"; + status = "disabled"; + }; + ipu2: ipu@02800000 { #crtc-cells = <1>; compatible = "fsl,imx6q-ipu"; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index e994011220e779bf237be1a254bcd7ef9524cb25..1cbbc5160d27d3f9065a61bbe1d7e77eb81d6605 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -45,6 +45,28 @@ status = "okay"; }; +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 + >; + }; + }; + + ecspi1 { + pinctrl_ecspi1_sabreauto: ecspi1-sabreauto { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 + >; + }; + }; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4_1>; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 6e5dfdb32416847184875a6652aeea70281a9850..39eafc222a2ece4f07184b26b1a96e85b23eb871 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -27,6 +27,15 @@ enable-active-high; }; + reg_usb_h1_vbus: usb_h1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 0>; + enable-active-high; + }; + reg_audio: wm8962_supply { compatible = "regulator-fixed"; regulator-name = "wm8962-supply"; @@ -41,12 +50,14 @@ volume-up { label = "Volume Up"; gpios = <&gpio1 4 0>; + gpio-key,wakeup; linux,code = <115>; /* KEY_VOLUMEUP */ }; volume-down { label = "Volume Down"; gpios = <&gpio1 5 0>; + gpio-key,wakeup; linux,code = <114>; /* KEY_VOLUMEDOWN */ }; }; @@ -77,6 +88,22 @@ status = "okay"; }; +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 9 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_2>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet_1>; @@ -93,7 +120,7 @@ codec: wm8962@1a { compatible = "wlf,wm8962"; reg = <0x1a>; - clocks = <&clks 169>; + clocks = <&clks 201>; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; @@ -113,6 +140,68 @@ }; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_2>; + status = "okay"; + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio6>; + interrupts = <7 2>; + wakeup-gpios = <&gpio6 7 0>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 + >; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; +}; + &ssi2 { fsl,mode = "i2s-slave"; status = "okay"; @@ -125,6 +214,7 @@ }; &usbh1 { + vbus-supply = <®_usb_h1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..a55113e65bcb0a3d9d6345f7129623384ee881b6 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -0,0 +1,137 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/ { + regulators { + compatible = "simple-bus"; + + reg_2p5v: 2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + sound { + compatible = "fsl,imx6-wandboard-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6-wandboard-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_2>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x80000000 /* WL_REF_ON */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* WL_RST_N */ + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */ + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1_2>; + cd-gpios = <&gpio1 2 0>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_2>; + non-removable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + cd-gpios = <&gpio3 9 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index f21d259080fd925846e0cc73957bc08866366ace..ccd55c2fdb67e3a69402021709275108a96a6f75 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -14,11 +14,6 @@ / { aliases { - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -26,6 +21,18 @@ gpio4 = &gpio5; gpio5 = &gpio6; gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; }; intc: interrupt-controller@00a01000 { @@ -81,15 +88,14 @@ #size-cells = <1>; reg = <0x00112000 0x2000>, <0x00114000 0x2000>; reg-names = "gpmi-nand", "bch"; - interrupts = <0 13 0x04>, <0 15 0x04>; - interrupt-names = "gpmi-dma", "bch"; + interrupts = <0 15 0x04>; + interrupt-names = "bch"; clocks = <&clks 152>, <&clks 153>, <&clks 151>, <&clks 150>, <&clks 149>; clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch"; dmas = <&dma_apbh 0>; dma-names = "rx-tx"; - fsl,gpmi-dma-channel = <0>; status = "disabled"; }; @@ -184,6 +190,8 @@ interrupts = <0 26 0x04>; clocks = <&clks 160>, <&clks 161>; clock-names = "ipg", "per"; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -197,6 +205,9 @@ reg = <0x02028000 0x4000>; interrupts = <0 46 0x04>; clocks = <&clks 178>; + dmas = <&sdma 37 1 0>, + <&sdma 38 1 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <38 37>; status = "disabled"; @@ -207,6 +218,9 @@ reg = <0x0202c000 0x4000>; interrupts = <0 47 0x04>; clocks = <&clks 179>; + dmas = <&sdma 41 1 0>, + <&sdma 42 1 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <42 41>; status = "disabled"; @@ -217,6 +231,9 @@ reg = <0x02030000 0x4000>; interrupts = <0 48 0x04>; clocks = <&clks 180>; + dmas = <&sdma 45 1 0>, + <&sdma 46 1 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <46 45>; status = "disabled"; @@ -278,17 +295,23 @@ }; can1: flexcan@02090000 { + compatible = "fsl,imx6q-flexcan"; reg = <0x02090000 0x4000>; interrupts = <0 110 0x04>; + clocks = <&clks 108>, <&clks 109>; + clock-names = "ipg", "per"; }; can2: flexcan@02094000 { + compatible = "fsl,imx6q-flexcan"; reg = <0x02094000 0x4000>; interrupts = <0 111 0x04>; + clocks = <&clks 110>, <&clks 111>; + clock-names = "ipg", "per"; }; gpt: gpt@02098000 { - compatible = "fsl,imx6q-gpt"; + compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 0x04>; clocks = <&clks 119>, <&clks 120>; @@ -491,6 +514,13 @@ }; }; + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupts = <0 49 0x04>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + }; + usbphy1: usbphy@020c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; @@ -546,6 +576,713 @@ reg = <0x020e0000 0x38>; }; + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc"; + reg = <0x020e0000 0x4000>; + + audmux { + pinctrl_audmux_1: audmux-1 { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x80000000 + MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x80000000 + MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x80000000 + MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000 + >; + }; + + pinctrl_audmux_2: audmux-2 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x80000000 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x80000000 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x80000000 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000 + >; + }; + + pinctrl_audmux_3: audmux-3 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x80000000 + MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x80000000 + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x80000000 + >; + }; + }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi1_2: ecspi1grp-2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + >; + }; + }; + + ecspi3 { + pinctrl_ecspi3_1: ecspi3grp-1 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + >; + }; + }; + + enet { + pinctrl_enet_1: enetgrp-1 { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_enet_2: enetgrp-2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + >; + }; + + pinctrl_enet_3: enetgrp-3 { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + >; + }; + }; + + esai { + pinctrl_esai_1: esaigrp-1 { + fsl,pins = < + MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1b030 + MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030 + MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1b030 + MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030 + MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3 0x1b030 + MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1b030 + MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1b030 + MX6QDL_PAD_NANDF_CS2__ESAI_TX0 0x1b030 + MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x1b030 + >; + }; + + pinctrl_esai_2: esaigrp-2 { + fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030 + MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1b030 + MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030 + MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x1b030 + MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1b030 + MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1b030 + MX6QDL_PAD_GPIO_17__ESAI_TX0 0x1b030 + MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x1b030 + MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1b030 + MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x1b030 + >; + }; + }; + + flexcan1 { + pinctrl_flexcan1_1: flexcan1grp-1 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 + >; + }; + + pinctrl_flexcan1_2: flexcan1grp-2 { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x80000000 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 + >; + }; + }; + + flexcan2 { + pinctrl_flexcan2_1: flexcan2grp-1 { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000 + >; + }; + }; + + gpmi-nand { + pinctrl_gpmi_nand_1: gpmi-nand-1 { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + }; + + hdmi_hdcp { + pinctrl_hdmi_hdcp_1: hdmihdcpgrp-1 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1 + >; + }; + + pinctrl_hdmi_hdcp_2: hdmihdcpgrp-2 { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1 + >; + }; + + pinctrl_hdmi_hdcp_3: hdmihdcpgrp-3 { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1 + >; + }; + }; + + hdmi_cec { + pinctrl_hdmi_cec_1: hdmicecgrp-1 { + fsl,pins = < + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_hdmi_cec_2: hdmicecgrp-2 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + }; + + i2c1 { + pinctrl_i2c1_1: i2c1grp-1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c1_2: i2c1grp-2 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + }; + + i2c2 { + pinctrl_i2c2_1: i2c2grp-1 { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2_2: i2c2grp-2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2_3: i2c2grp-3 { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + }; + + i2c3 { + pinctrl_i2c3_1: i2c3grp-1 { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3_2: i2c3grp-2 { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3_3: i2c3grp-3 { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3_4: i2c3grp-4 { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + }; + + ipu1 { + pinctrl_ipu1_1: ipu1grp-1 { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x80000000 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_ipu1_2: ipu1grp-2 { /* parallel camera */ + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x80000000 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x80000000 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x80000000 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x80000000 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x80000000 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x80000000 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x80000000 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x80000000 + MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x80000000 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x80000000 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x80000000 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x80000000 + >; + }; + + pinctrl_ipu1_3: ipu1grp-3 { /* parallel port 16-bit */ + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x80000000 + MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x80000000 + MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x80000000 + MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x80000000 + MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x80000000 + MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x80000000 + MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x80000000 + MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x80000000 + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x80000000 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x80000000 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x80000000 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x80000000 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x80000000 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x80000000 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x80000000 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x80000000 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x80000000 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x80000000 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x80000000 + >; + }; + }; + + mlb { + pinctrl_mlb_1: mlbgrp-1 { + fsl,pins = < + MX6QDL_PAD_GPIO_3__MLB_CLK 0x71 + MX6QDL_PAD_GPIO_6__MLB_SIG 0x71 + MX6QDL_PAD_GPIO_2__MLB_DATA 0x71 + >; + }; + + pinctrl_mlb_2: mlbgrp-2 { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__MLB_CLK 0x71 + MX6QDL_PAD_GPIO_6__MLB_SIG 0x71 + MX6QDL_PAD_GPIO_2__MLB_DATA 0x71 + >; + }; + }; + + pwm0 { + pinctrl_pwm0_1: pwm0grp-1 { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + }; + + pwm3 { + pinctrl_pwm3_1: pwm3grp-1 { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + }; + + spdif { + pinctrl_spdif_1: spdifgrp-1 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0 + >; + }; + + pinctrl_spdif_2: spdifgrp-2 { + fsl,pins = < + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 + MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + }; + + uart2 { + pinctrl_uart2_1: uart2grp-1 { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2_2: uart2grp-2 { /* DTE mode */ + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1 + >; + }; + }; + + uart3 { + pinctrl_uart3_1: uart3grp-1 { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart3_2: uart3grp-2 { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + >; + }; + }; + + uart4 { + pinctrl_uart4_1: uart4grp-1 { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + }; + + usbotg { + pinctrl_usbotg_1: usbotggrp-1 { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usbotg_2: usbotggrp-2 { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + }; + + usbh2 { + pinctrl_usbh2_1: usbh2grp-1 { + fsl,pins = < + MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x40013030 + MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x40013030 + >; + }; + + pinctrl_usbh2_2: usbh2grp-2 { + fsl,pins = < + MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x40017030 + >; + }; + }; + + usbh3 { + pinctrl_usbh3_1: usbh3grp-1 { + fsl,pins = < + MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x40013030 + MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x40013030 + >; + }; + + pinctrl_usbh3_2: usbh3grp-2 { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x40017030 + >; + }; + }; + + usdhc1 { + pinctrl_usdhc1_1: usdhc1grp-1 { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17059 + MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17059 + MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17059 + MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc1_2: usdhc1grp-2 { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + >; + }; + }; + + usdhc2 { + pinctrl_usdhc2_1: usdhc2grp-1 { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2_2: usdhc2grp-2 { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + }; + + usdhc3 { + pinctrl_usdhc3_1: usdhc3grp-1 { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3_2: usdhc3grp-2 { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + }; + + usdhc4 { + pinctrl_usdhc4_1: usdhc4grp-1 { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_usdhc4_2: usdhc4grp-2 { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + >; + }; + }; + + weim { + pinctrl_weim_cs0_1: weim_cs0grp-1 { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + >; + }; + + pinctrl_weim_nor_1: weim_norgrp-1 { + fsl,pins = < + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 + /* data */ + MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0 + MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0 + MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0 + MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0 + MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0 + MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0 + MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0 + MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0 + MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0 + MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0 + MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0 + MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0 + MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0 + MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0 + MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0 + MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0 + /* address */ + MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1 + MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1 + MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1 + MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1 + MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1 + MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1 + MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1 + MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; + }; + }; + }; + ldb: ldb@020e0008 { #address-cells = <1>; #size-cells = <0>; @@ -555,13 +1292,11 @@ lvds-channel@0 { reg = <0>; - crtcs = <&ipu1 0>; status = "disabled"; }; lvds-channel@1 { reg = <1>; - crtcs = <&ipu1 1>; status = "disabled"; }; }; @@ -582,6 +1317,7 @@ interrupts = <0 2 0x04>; clocks = <&clks 155>, <&clks 155>; clock-names = "ipg", "ahb"; + #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; }; }; @@ -751,8 +1487,8 @@ clocks = <&clks 196>; }; - ocotp@021bc000 { - compatible = "fsl,imx6q-ocotp"; + ocotp: ocotp@021bc000 { + compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; }; @@ -791,6 +1527,8 @@ interrupts = <0 27 0x04>; clocks = <&clks 160>, <&clks 161>; clock-names = "ipg", "per"; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -800,6 +1538,8 @@ interrupts = <0 28 0x04>; clocks = <&clks 160>, <&clks 161>; clock-names = "ipg", "per"; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -809,6 +1549,8 @@ interrupts = <0 29 0x04>; clocks = <&clks 160>, <&clks 161>; clock-names = "ipg", "per"; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -818,6 +1560,8 @@ interrupts = <0 30 0x04>; clocks = <&clks 160>, <&clks 161>; clock-names = "ipg", "per"; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index c5e5da02d7e3e81496ebf5d83466e75fa4ef33f7..c46651e4d966769948be53636b6e1653005cda13 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -152,32 +152,41 @@ }; uart5: serial@02018000 { - compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + compatible = "fsl,imx6sl-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02018000 0x4000>; interrupts = <0 30 0x04>; clocks = <&clks IMX6SL_CLK_UART>, <&clks IMX6SL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; uart1: serial@02020000 { - compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + compatible = "fsl,imx6sl-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; clocks = <&clks IMX6SL_CLK_UART>, <&clks IMX6SL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; uart2: serial@02024000 { - compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + compatible = "fsl,imx6sl-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02024000 0x4000>; interrupts = <0 27 0x04>; clocks = <&clks IMX6SL_CLK_UART>, <&clks IMX6SL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -186,6 +195,9 @@ reg = <0x02028000 0x4000>; interrupts = <0 46 0x04>; clocks = <&clks IMX6SL_CLK_SSI1>; + dmas = <&sdma 37 1 0>, + <&sdma 38 1 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; status = "disabled"; }; @@ -195,6 +207,9 @@ reg = <0x0202c000 0x4000>; interrupts = <0 47 0x04>; clocks = <&clks IMX6SL_CLK_SSI2>; + dmas = <&sdma 41 1 0>, + <&sdma 42 1 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; status = "disabled"; }; @@ -204,27 +219,36 @@ reg = <0x02030000 0x4000>; interrupts = <0 48 0x04>; clocks = <&clks IMX6SL_CLK_SSI3>; + dmas = <&sdma 45 1 0>, + <&sdma 46 1 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; status = "disabled"; }; uart3: serial@02034000 { - compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + compatible = "fsl,imx6sl-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02034000 0x4000>; interrupts = <0 28 0x04>; clocks = <&clks IMX6SL_CLK_UART>, <&clks IMX6SL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; uart4: serial@02038000 { - compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; + compatible = "fsl,imx6sl-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02038000 0x4000>; interrupts = <0 29 0x04>; clocks = <&clks IMX6SL_CLK_UART>, <&clks IMX6SL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; }; @@ -594,6 +618,7 @@ clocks = <&clks IMX6SL_CLK_SDMA>, <&clks IMX6SL_CLK_SDMA>; clock-names = "ipg", "ahb"; + #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin"; }; diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dts index 1334b42c6b77e428ee1d2a504b8a480267cbcdbe..a68e34bbecb2628d21fcfb018cb9567f722efc3b 100644 --- a/arch/arm/boot/dts/keystone.dts +++ b/arch/arm/boot/dts/keystone.dts @@ -7,7 +7,9 @@ */ /dts-v1/; -/include/ "skeleton.dtsi" +#include + +#include "skeleton.dtsi" / { model = "Texas Instruments Keystone 2 SoC"; @@ -67,18 +69,23 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0x308>; + interrupts = + , + , + , + ; }; pmu { compatible = "arm,cortex-a15-pmu"; - interrupts = <0 20 0xf01>, - <0 21 0xf01>, - <0 22 0xf01>, - <0 23 0xf01>; + interrupts = , + , + , + ; }; soc { @@ -100,7 +107,7 @@ reg-io-width = <4>; reg = <0x02530c00 0x100>; clock-frequency = <133120000>; - interrupts = <0 277 0xf01>; + interrupts = ; }; uart1: serial@02531000 { @@ -110,7 +117,7 @@ reg-io-width = <4>; reg = <0x02531000 0x100>; clock-frequency = <133120000>; - interrupts = <0 280 0xf01>; + interrupts = ; }; }; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 1e5bef0bead7e39d95a31b8fade75c112081c9a3..650ef30e1856f9591f32a445f279489c82b22b68 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -1,4 +1,39 @@ / { + mbus { + pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { compatible = "marvell,88f6281-pinctrl"; @@ -41,37 +76,6 @@ }; }; - pcie-controller { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - }; - }; - rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index a63a1113726274f8ff56060c7a6abe41dd01b2d9..3933a331ddc2ed8d8f71b58c4cc7389e7e860220 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -1,4 +1,59 @@ / { + mbus { + pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 10>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 18>; + status = "disabled"; + }; + }; + }; ocp@f1000000 { pinctrl: pinctrl@10000 { @@ -94,52 +149,5 @@ status = "disabled"; }; - pcie-controller { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x00044000 0x00044000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 10>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 18>; - status = "disabled"; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 00c48d26de68024dd941ea4f35586d8d597c8699..142b9cd3b4541d9fbc8205ad2770c2084a6dfee3 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "LaCie CloudBox"; @@ -89,3 +89,19 @@ gpios = <&gpio0 17 0>; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts index 9d777edd1f369e2705d79c19a747a6ca0bca32e9..72c4b0a0366ffcd656f16456c430b067ff814b5a 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts @@ -11,14 +11,15 @@ /dts-v1/; -/include/ "kirkwood-db.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood-db.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Marvell DB-88F6281-BP Development Board"; compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - ocp@f1000000 { + mbus { + ranges = ; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts index f4c852886d2383a4044ff101a597b756b6a9cb4f..36c411d349268e41e05d220f3d56e2d82553506e 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts @@ -11,14 +11,15 @@ /dts-v1/; -/include/ "kirkwood-db.dtsi" -/include/ "kirkwood-6282.dtsi" +#include "kirkwood-db.dtsi" +#include "kirkwood-6282.dtsi" / { model = "Marvell DB-88F6282-BP Development Board"; compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - ocp@f1000000 { + mbus { + ranges = ; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi index c87cfb8161202fd1def8b496e00ed256505c0de5..c0e2a587917474a37a515ff7c70e133ee193f0ba 100644 --- a/arch/arm/boot/dts/kirkwood-db.dtsi +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -12,7 +12,7 @@ * and 6282 variants of the Marvell Kirkwood Development Board. */ -/include/ "kirkwood.dtsi" +#include "kirkwood.dtsi" / { memory { @@ -77,13 +77,21 @@ cd-gpios = <&gpio1 6 0>; status = "okay"; }; + }; +}; - pcie-controller { - status = "okay"; +&mdio { + status = "okay"; - pcie@1,0 { - status = "okay"; - }; - }; + ethphy0: ethernet-phy@8 { + device_type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 14d4ceea30578f811195e404927be76a33e08087..e112ca62d978e9ccdedfb37d06bec0b8fe036de8 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-dnskw.dtsi" +#include "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-320 NAS (Rev A1)"; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index 63872570e6ce475bf3067cd1955b454958bfe65b..5119fb8a8eb6203c5743294246bdd62731da7523 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-dnskw.dtsi" +#include "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-325 NAS (Rev A1)"; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 0afe1d07c8038913d4580cd125424ba5aabe126e..d544f77a4ca465ccc268b90d5edc9c1ca9aee490 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -1,5 +1,5 @@ -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "D-Link DNS NASes (kirkwood-based)"; @@ -219,3 +219,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + device_type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 7714742bb8d8cafc9b8be4be6fbec9b25317a6b3..59a2117c35a7fe2dc68f2b5f7171810dd60532d1 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Seagate FreeAgent Dockstar"; @@ -90,3 +90,20 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + compatible = "marvell,88e1116"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 36c7ba38d5000818768d8d275ab3af6d8b88ec6b..6f62af99c9cbebe4da42d000c6ae28c34054e52f 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Globalscale Technologies Dreamplug"; @@ -99,3 +99,31 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 31caa64050657da5ccc5b0fb169e0e7fbbc25977..6f7c7d7ecf2acf74bcd5a11f2122c30aea72fb3a 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Seagate GoFlex Net"; @@ -170,3 +170,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 1e642f39b1541f9984495f8caa92e74e1c637786..6548b9dc685560887f3771156f74987e5842d918 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Globalscale Technologies Guruplug Server Plus"; @@ -96,3 +96,33 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + compatible = "marvell,88e1121"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + compatible = "marvell,88e1121"; + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 20c4b081f420257881151b975f873d56cd7bd8e9..cb711a3bd9833f3061060783fe38357bbf65cce3 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; @@ -122,3 +122,19 @@ }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + device_type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 441204e8abc6aa969b371a44ca2fd7dab97e9bcc..0323f017eeedecbc9ea3acc64d632b16b15103cd 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Iomega Iconnect"; @@ -18,6 +18,17 @@ linux,initrd-end = <0x4800000>; }; + mbus { + ranges = ; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { pmx_button_reset: pmx-button-reset { @@ -101,14 +112,6 @@ reg = <0x980000 0x1f400000>; }; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio-leds { @@ -176,3 +179,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@11 { + device_type = "ethernet-phy"; + reg = <11>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 00a7bfe5e83bbb060efc14d84489dad1ff588ea0..df8447442b37b406332766ece95f83677ea53819 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Iomega StorCenter ix2-200"; @@ -194,3 +194,27 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy1: ethernet-phy@11 { + device_type = "ethernet-phy"; + reg = <11>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts index c3f036b86ccad52691ddcc4c564e4f77f4a6c911..da674bbd49a8642524f89995102b86c7ec9f7bc0 100644 --- a/arch/arm/boot/dts/kirkwood-is2.dts +++ b/arch/arm/boot/dts/kirkwood-is2.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { model = "LaCie Internet Space v2"; @@ -30,3 +30,5 @@ }; }; }; + +ðphy0 { reg = <8>; }; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 5d9f5ea787001ecf8f715f38c83e91e22c804cb5..6899408482d24c1cf2229add5ba8f63fd07f8645 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-98dx4122.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-98dx4122.dtsi" / { model = "Keymile Kirkwood Reference Design"; @@ -50,3 +50,19 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts index 9f55d95f35f5806ca126cb23120abbcf0d692a94..e2fa368aef25b5292eaa58fb7d328d1052a26b14 100644 --- a/arch/arm/boot/dts/kirkwood-lschlv2.dts +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-lsxl.dtsi" +#include "kirkwood-lsxl.dtsi" / { model = "Buffalo Linkstation LS-CHLv2"; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts index 5c84c118ed8d6f81e490c9b7924c3aecd2fb845d..8d89cdf8d6bf2bdb8ec5ca92256b509ecaa32cbf 100644 --- a/arch/arm/boot/dts/kirkwood-lsxhl.dts +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-lsxl.dtsi" +#include "kirkwood-lsxl.dtsi" / { model = "Buffalo Linkstation LS-XHL"; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 31b17f5b9d285cc3fdb956157fe2a79b0cdccb63..4e8f9e42c5929135e05109142bcec7100ed83d02 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -1,5 +1,5 @@ -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { chosen { @@ -207,3 +207,31 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; + + ethphy1: ethernet-phy@8 { + device_type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 6179333fd71f33e628146a5bce9ed68140ffdbf3..ce2b94b513dbe1dc20478e7b8287864a13c1cb89 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "MPL CEC4"; @@ -16,6 +16,17 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + mbus { + ranges = ; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { pmx_led_health: pmx-led-health { @@ -134,14 +145,6 @@ cd-gpios = <&gpio1 15 1>; /* No WP GPIO */ }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio-leds { @@ -191,3 +194,30 @@ }; }; +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; + + ethphy1: ethernet-phy@2 { + device_type = "ethernet-phy"; + reg = <2>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts new file mode 100644 index 0000000000000000000000000000000000000000..6317e1d088b3e16b89df5e9620c19f053ac34451 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -0,0 +1,125 @@ +/* + * Marvell 88F6281 GTW GE Board + * + * Lennert Buytenhek + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are common between the 6281 + * and 6282 variants of the Marvell Kirkwood Development Board. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Marvell 88F6281 GTW GE Board"; + compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl@10000 { + pmx_usb_led: pmx-usb-led { + marvell,pins = "mpp12"; + marvell,function = "gpo"; + }; + + pmx_leds: pmx-leds { + marvell,pins = "mpp20", "mpp21"; + marvell,function = "gpio"; + }; + + pmx_keys: pmx-keys { + marvell,pins = "mpp46", "mpp47"; + marvell,function = "gpio"; + }; + }; + + spi@10600 { + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l12805d"; + reg = <0>; + spi-max-frequency = <50000000>; + mode = <0>; + }; + }; + + serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; + clock-frequency = <200000000>; + status = "ok"; + }; + + ehci@50000 { + status = "okay"; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_leds &pmx_usb_led>; + pinctrl-names = "default"; + + green-status { + label = "gtw:green:Status"; + gpios = <&gpio0 20 0>; + }; + + red-status { + label = "gtw:red:Status"; + gpios = <&gpio0 21 0>; + }; + + green-usb { + label = "gtw:green:USB"; + gpios = <&gpio0 12 0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_keys>; + pinctrl-names = "default"; + + button@1 { + label = "SWR Button"; + linux,code = <0x198>; /* KEY_RESTART */ + gpios = <&gpio1 15 1>; + }; + button@2 { + label = "WPS Button"; + linux,code = <0x211>; /* KEY_WPS_BUTTON */ + gpios = <&gpio1 14 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index ad6ade7d91912fb146adee2b929984ac3790e3ef..874857ea9cb8c8a80fc812609a2b3cd368cb40df 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6282.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" / { model = "NETGEAR ReadyNAS Duo v2"; @@ -16,6 +16,17 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + mbus { + ranges = ; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { pmx_button_power: pmx-button-power { @@ -52,6 +63,17 @@ }; }; + clocks { + #address-cells = <1>; + #size-cells = <0>; + + g762_clk: fixedclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + }; + }; + i2c@11000 { status = "okay"; @@ -59,6 +81,15 @@ compatible = "ricoh,rs5c372a"; reg = <0x32>; }; + + g762: g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; }; serial@12000 { @@ -101,14 +132,6 @@ status = "okay"; nr-ports = <2>; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio-leds { @@ -184,3 +207,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 2afac04058167dc896283d452426e145bbcb4f5c..2fcb82e208288e6f0d9e72afc7d7650a2ec946aa 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -1,5 +1,5 @@ -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { chosen { @@ -84,3 +84,19 @@ }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy { + device_type = "ethernet-phy"; + /* overwrite reg property in board file */ + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts index b50e93d7796c27c6beb583733257d3795175169b..53368d1022ccd6fbffc2ad86037a73f870f694bb 100644 --- a/arch/arm/boot/dts/kirkwood-ns2.dts +++ b/arch/arm/boot/dts/kirkwood-ns2.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { model = "LaCie Network Space v2"; @@ -30,3 +30,5 @@ }; }; }; + +ðphy0 { reg = <8>; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts index af8259fe89552e610c6bd0122ae25638e81fb093..279607093cdbdbda0c0c80207256ab156272e334 100644 --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { model = "LaCie Network Space Lite v2"; @@ -30,3 +30,5 @@ }; }; }; + +ðphy0 { reg = <0>; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts index 85f24d227e17cffb41ad712b0fa81e6d0d9a88be..defdc77fb5506bdb7b3bf7260685cf266b077af6 100644 --- a/arch/arm/boot/dts/kirkwood-ns2max.dts +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { model = "LaCie Network Space Max v2"; @@ -49,3 +49,5 @@ }; }; }; + +ðphy0 { reg = <8>; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts index 329e530bffe72c32d3dc62165ea1284419baf2e7..adbafdd909915841aae8825de27265026d842672 100644 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { /* This machine is embedded in the first LaCie CloudBox product. */ @@ -50,3 +50,5 @@ }; }; }; + +ðphy0 { reg = <0>; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..06267a91de38d7aa4bd1dc69f1e61bf39047faec --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi @@ -0,0 +1,107 @@ +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "ZyXEL NSA310"; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pmx_usb_power_off: pmx-usb-power-off { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + pmx_pwr_off: pmx-pwr-off { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + }; + + serial@12000 { + status = "ok"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + nand@3000000 { + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x0100000>; + read-only; + }; + partition@100000 { + label = "uboot_env"; + reg = <0x0100000 0x0080000>; + }; + partition@180000 { + label = "key_store"; + reg = <0x0180000 0x0080000>; + }; + partition@200000 { + label = "info"; + reg = <0x0200000 0x0080000>; + }; + partition@280000 { + label = "etc"; + reg = <0x0280000 0x0a00000>; + }; + partition@c80000 { + label = "kernel_1"; + reg = <0x0c80000 0x0a00000>; + }; + partition@1680000 { + label = "rootfs1"; + reg = <0x1680000 0x2fc0000>; + }; + partition@4640000 { + label = "kernel_2"; + reg = <0x4640000 0x0a00000>; + }; + partition@5040000 { + label = "rootfs2"; + reg = <0x5040000 0x2fc0000>; + }; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_pwr_off>; + pinctrl-names = "default"; + gpios = <&gpio1 16 0>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_off>; + pinctrl-names = "default"; + + usb0_power_off: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power Off"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 21 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 69003598f5faa8287d593a03b9a5371e9254e4bb..7aeae0c2c1f498bd31fd6572b278dbe944eab107 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -1,10 +1,8 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood-nsa310-common.dtsi" / { - model = "ZyXEL NSA310"; compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { @@ -16,6 +14,17 @@ bootargs = "console=ttyS0,115200"; }; + mbus { + ranges = ; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { pinctrl-0 = <&pmx_unknown>; @@ -41,11 +50,6 @@ marvell,function = "gpio"; }; - pmx_usb_power_off: pmx-usb-power-off { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - pmx_led_sys_green: pmx-led-sys-green { marvell,pins = "mpp28"; marvell,function = "gpio"; @@ -95,20 +99,6 @@ marvell,pins = "mpp46"; marvell,function = "gpio"; }; - - pmx_pwr_off: pmx-pwr-off { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "ok"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; }; i2c@11000 { @@ -119,57 +109,6 @@ reg = <0x2e>; }; }; - - nand@3000000 { - status = "okay"; - chip-delay = <35>; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x0100000>; - read-only; - }; - partition@100000 { - label = "uboot_env"; - reg = <0x0100000 0x0080000>; - }; - partition@180000 { - label = "key_store"; - reg = <0x0180000 0x0080000>; - }; - partition@200000 { - label = "info"; - reg = <0x0200000 0x0080000>; - }; - partition@280000 { - label = "etc"; - reg = <0x0280000 0x0a00000>; - }; - partition@c80000 { - label = "kernel_1"; - reg = <0x0c80000 0x0a00000>; - }; - partition@1680000 { - label = "rootfs1"; - reg = <0x1680000 0x2fc0000>; - }; - partition@4640000 { - label = "kernel_2"; - reg = <0x4640000 0x0a00000>; - }; - partition@5040000 { - label = "rootfs2"; - reg = <0x5040000 0x2fc0000>; - }; - }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio_keys { @@ -246,30 +185,4 @@ gpios = <&gpio1 8 0>; }; }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_pwr_off>; - pinctrl-names = "default"; - gpios = <&gpio1 16 0>; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_off>; - pinctrl-names = "default"; - - usb0_power_off: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power Off"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 21 0>; - }; - }; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts new file mode 100644 index 0000000000000000000000000000000000000000..ab0212b0e6f58629e593cd6a4e2dbecb5957c166 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -0,0 +1,165 @@ +/dts-v1/; + +#include "kirkwood-nsa310-common.dtsi" + +/* + * There are at least two different NSA310 designs. This variant does + * not have the red USB Led. + */ + +/ { + compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-names = "default"; + + pmx_led_esata_green: pmx-led-esata-green { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_led_esata_red: pmx-led-esata-red { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_led_usb_green: pmx-led-usb-green { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_usb_power_off: pmx-usb-power-off { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_led_sys_green: pmx-led-sys-green { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_led_sys_red: pmx-led-sys-red { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + + pmx_btn_copy: pmx-btn-copy { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + + pmx_led_copy_green: pmx-led-copy-green { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_led_copy_red: pmx-led-copy-red { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + pmx_led_hdd_green: pmx-led-hdd-green { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_hdd_red: pmx-led-hdd-red { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + pmx_btn_power: pmx-btn-power { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + }; + + i2c@11000 { + status = "okay"; + + lm85: lm85@2e { + compatible = "lm85"; + reg = <0x2e>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio1 14 0>; + }; + button@2 { + label = "Copy Button"; + linux,code = <133>; + gpios = <&gpio1 5 1>; + }; + button@3 { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio1 4 1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + green-sys { + label = "nsa310:green:sys"; + gpios = <&gpio0 28 0>; + }; + red-sys { + label = "nsa310:red:sys"; + gpios = <&gpio0 29 0>; + }; + green-hdd { + label = "nsa310:green:hdd"; + gpios = <&gpio1 9 0>; + }; + red-hdd { + label = "nsa310:red:hdd"; + gpios = <&gpio1 10 0>; + }; + green-esata { + label = "nsa310:green:esata"; + gpios = <&gpio0 12 0>; + }; + red-esata { + label = "nsa310:red:esata"; + gpios = <&gpio0 13 0>; + }; + green-usb { + label = "nsa310:green:usb"; + gpios = <&gpio0 15 0>; + }; + green-copy { + label = "nsa310:green:copy"; + gpios = <&gpio1 7 0>; + }; + red-copy { + label = "nsa310:red:copy"; + gpios = <&gpio1 8 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 38dc8517d777244fb75f9848cccb449b80a338d3..85ccf8d8abb133bf62289ddd6adb0ef218764eae 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6282.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" / { model = "Plat'Home OpenBlocksA6"; @@ -166,3 +166,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi index f7143f128504cbca0a2bbf3d290bb294a3a90209..5696b630b70bb0c19fb0d4bc38b17342cd5a5228 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -6,8 +6,8 @@ * Licensed under GPLv2 */ -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { memory { @@ -91,3 +91,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts index f620ce48de97ac1d60ddc2445cd0ae70e785d4c9..eac6a21f3b1f0b2402bf58c341b96f25945e455a 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts @@ -8,7 +8,7 @@ /dts-v1/; -/include/ "kirkwood-sheevaplug-common.dtsi" +#include "kirkwood-sheevaplug-common.dtsi" / { model = "Globalscale Technologies eSATA SheevaPlug"; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts index bf1dff251432767701b322cd85c4ca9e44cfea5b..bb61918313dbf8c495b546273b34b6401c3ba8be 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts @@ -8,7 +8,7 @@ /dts-v1/; -/include/ "kirkwood-sheevaplug-common.dtsi" +#include "kirkwood-sheevaplug-common.dtsi" / { model = "Globalscale Technologies SheevaPlug"; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index f2052d7bc10f1ffc0ee39acc796a21227c5a432c..30842b4ff29394185f61d3cc702ddcd192000043 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6282.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" / { model = "Univeral Scientific Industrial Co. Topkick-1281P2"; @@ -203,3 +203,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index 6dd1038e4de401b4a601aa3e91a6603b7a1f60ab..f755bc1dc604b16b97bd889c1605540875e7080a 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -1,8 +1,8 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" -/include/ "kirkwood-ts219.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-ts219.dtsi" / { ocp@f1000000 { @@ -50,4 +50,6 @@ gpios = <&gpio0 16 1>; }; }; -}; \ No newline at end of file +}; + +ðphy0 { reg = <8>; }; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index 6fdc5ffcaae54244c544cc2242ed96fe5f889265..9efcd2dc79d3f74eaffb2b95bc9ff4fb9c7662db 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -1,10 +1,21 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6282.dtsi" -/include/ "kirkwood-ts219.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" +#include "kirkwood-ts219.dtsi" / { + mbus { + ranges = ; + pcie-controller { + status = "okay"; + + pcie@2,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { @@ -30,14 +41,6 @@ marvell,function = "gpio"; }; }; - pcie-controller { - status = "okay"; - - pcie@2,0 { - status = "okay"; - }; - }; - }; gpio_keys { @@ -58,4 +61,6 @@ gpios = <&gpio1 5 1>; }; }; -}; \ No newline at end of file +}; + +ðphy0 { reg = <0>; }; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 0c9a94cd666c597dab629b8a9a7908f02e82abd6..39158cf16258c9480de422996b8bda5c7a84dfc2 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -11,6 +11,16 @@ bootargs = "console=ttyS0,115200n8"; }; + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { i2c@11000 { status = "okay"; @@ -87,12 +97,21 @@ status = "okay"; nr-ports = <2>; }; - pcie-controller { - status = "okay"; + }; +}; - pcie@1,0 { - status = "okay"; - }; - }; +&mdio { + status = "okay"; + + ethphy0: ethernet-phy { + device_type = "ethernet-phy"; + /* overwrite reg property in board file */ + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 9809fc1f105ccf683ede2fc11afee659a483a5dc..cf7aeaf89e9c1a6b8795113e0726c48b58f16803 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -1,5 +1,7 @@ /include/ "skeleton.dtsi" +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + / { compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; @@ -20,23 +22,53 @@ gpio0 = &gpio0; gpio1 = &gpio1; }; - intc: interrupt-controller { - compatible = "marvell,orion-intc", "marvell,intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xf1020204 0x04>, - <0xf1020214 0x04>; + + mbus { + compatible = "marvell,kirkwood-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ + pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ }; ocp@f1000000 { compatible = "simple-bus"; ranges = <0x00000000 0xf1000000 0x0100000 - 0xe0000000 0xe0000000 0x8100000 /* PCIE */ 0xf4000000 0xf4000000 0x0000400 0xf5000000 0xf5000000 0x0000400>; #address-cells = <1>; #size-cells = <1>; + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x80>, <0x1500 0x20>; + }; + + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; + + intc: main-interrupt-ctrl@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x10>, <0x20210 0x10>; + }; + + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <1>; + marvell,#interrupts = <6>; + }; + core_clk: core-clocks@10030 { compatible = "marvell,kirkwood-core-clock"; reg = <0x10030 0x4>; @@ -103,9 +135,11 @@ #clock-cells = <1>; }; - wdt@20300 { + wdt: watchdog-timer@20300 { compatible = "marvell,orion-wdt"; reg = <0x20300 0x28>; + interrupt-parent = <&bridge_intc>; + interrupts = <3>; clocks = <&gate_clk 7>; status = "okay"; }; @@ -192,5 +226,57 @@ clocks = <&gate_clk 17>; status = "okay"; }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <46>; + clocks = <&gate_clk 0>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + + eth0: ethernet-controller@72000 { + compatible = "marvell,kirkwood-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + clocks = <&gate_clk 0>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet0-port@0 { + device_type = "network"; + compatible = "marvell,kirkwood-eth-port"; + reg = <0>; + interrupts = <11>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; + + eth1: ethernet-controller@76000 { + compatible = "marvell,kirkwood-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76000 0x4000>; + clocks = <&gate_clk 19>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet1-port@0 { + device_type = "network"; + compatible = "marvell,kirkwood-eth-port"; + reg = <0>; + interrupts = <15>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; }; }; diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index cdc010e0f93edcd330be85f74bda223951d6eaae..386d4287021534345dcfbed2f3e2f6d5079dcf0f 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -38,7 +38,7 @@ }; serial@19c40000 { - compatible = "qcom,msm-hsuart", "qcom,msm-uart"; + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; interrupts = <0 195 0x0>; diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index 9c1167b0459b6b3e4afd9f2a7e60f1f2f8584e1a..93e9f7e0b7ad22bdd1d0a096902bf80d8cd2be2d 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -38,7 +38,7 @@ }; serial@16440000 { - compatible = "qcom,msm-hsuart", "qcom,msm-uart"; + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; interrupts = <0 154 0x0>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index e643620417a9edb4bcabe2a447dbcf38b720f746..07be2cd7b3188f6c943b1928e812dfa676973bfb 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -644,7 +644,7 @@ utmi-mode = <2>; ranges; dwc3@4a030000 { - compatible = "synopsys,dwc3"; + compatible = "snps,dwc3"; reg = <0x4a030000 0x1000>; interrupts = ; usb-phy = <&usb2_phy>, <&usb3_phy>; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index 0077fc8510b78d5b92b03a5f3a7951ee5e9d5753..aed83deaa991c9b8856218ef0792f1c3f51cc2b4 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -53,3 +53,20 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + device-type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 892c64e3f1e1dd697d08f2c58bf6377f05104c2d..e06c37e91ac69b0ebbbe0d772264cb61b45be906 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -16,11 +16,12 @@ aliases { gpio0 = &gpio0; }; + intc: interrupt-controller { - compatible = "marvell,orion-intc", "marvell,intc"; + compatible = "marvell,orion-intc"; interrupt-controller; #interrupt-cells = <1>; - reg = <0xf1020204 0x04>; + reg = <0xf1020200 0x08>; }; ocp@f1000000 { @@ -132,5 +133,34 @@ interrupts = <28>; status = "okay"; }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <22>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + + eth: ethernet-controller@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet-port@0 { + device_type = "network"; + compatible = "marvell,orion-eth-port"; + reg = <0>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; }; }; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index f9d92da86783d75d00788b3104abd995c6022bce..83bb0eff697b8648b347c4fb936101c03dc6d4d5 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -28,5 +28,16 @@ marvell,intc-priority; marvell,intc-nr-irqs = <56>; }; + + gpio: gpio@40e00000 { + compatible = "intel,pxa3xx-gpio"; + reg = <0x40e00000 0x10000>; + interrupt-names = "gpio0", "gpio1", "gpio_mux"; + interrupts = <8 9 10>; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + }; }; }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index f603c6946c29bf64b6b51e7f9ecd4c03a814a7ec..e657a9db166612541d9900da8af96ba73a7201a3 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -50,3 +50,25 @@ }; }; }; + +&i2c5 { + vdd_dvfs: max8973@1b { + compatible = "maxim,max8973"; + reg = <0x1b>; + + regulator-min-microvolt = <935000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; + operating-points = < + /* kHz uV */ + 1950000 1115000 + 1462500 995000 + >; + voltage-tolerance = <1>; /* 1% */ +}; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 4ff2019c0e3032e286197346f34aa0fab3ca3bfc..6c26caa880f2917344ada23a6a8e8e106412a0f9 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -85,4 +85,137 @@ interrupt-parent = <&gic>; interrupts = <0 69 4>; }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 174 0x4>; + }; + + i2c1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 175 0x4>; + }; + + i2c2: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6520000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 176 0x4>; + }; + + i2c3: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6530000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 177 0x4>; + }; + + i2c4: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6540000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 178 0x4>; + }; + + i2c5: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 179 0x4>; + }; + + i2c6: i2c@e6550000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6550000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 184 0x4>; + }; + + i2c7: i2c@e6560000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6560000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 185 0x4>; + }; + + i2c8: i2c@e6570000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6570000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 173 0x4>; + }; + + mmcif0: mmcif@ee200000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 169 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + mmcif1: mmcif@ee220000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 170 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + pfc: pfc@e6050000 { + compatible = "renesas,pfc-r8a73a4"; + reg = <0 0xe6050000 0 0x9000>; + gpio-controller; + #gpio-cells = <2>; + }; + + sdhi0: sdhi@ee100000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee100000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 165 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi1: sdhi@ee120000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee120000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 166 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi2: sdhi@ee140000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 167 4>; + cap-sd-highspeed; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts index 09ea22c26359ab00130898b79e696a2b252b9aae..366f72989dc369b886468d7f25eea7f2f87200c5 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -10,6 +10,7 @@ /dts-v1/; /include/ "r8a7740.dtsi" +#include / { model = "armadillo 800 eva reference"; @@ -33,6 +34,21 @@ regulator-boot-on; }; + leds { + compatible = "gpio-leds"; + led1 { + gpios = <&pfc 102 GPIO_ACTIVE_HIGH>; + }; + led2 { + gpios = <&pfc 111 GPIO_ACTIVE_HIGH>; + }; + led3 { + gpios = <&pfc 110 GPIO_ACTIVE_HIGH>; + }; + led4 { + gpios = <&pfc 177 GPIO_ACTIVE_HIGH>; + }; + }; }; &i2c0 { @@ -41,5 +57,23 @@ reg = <0x55>; interrupt-parent = <&irqpin1>; interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */ + pinctrl-0 = <&st1232_pins>; + pinctrl-names = "default"; + gpios = <&pfc 166 GPIO_ACTIVE_LOW>; + }; +}; + +&pfc { + pinctrl-0 = <&scifa1_pins>; + pinctrl-names = "default"; + + scifa1_pins: scifa1 { + renesas,groups = "scifa1_data"; + renesas,function = "scifa1"; + }; + + st1232_pins: st1232 { + renesas,groups = "intc_irq10"; + renesas,function = "intc"; }; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 24e93064382116b3c8dc7b8e5b11df4b1c5c9133..e18a195b55f3c7fb7220a9ccdc8dd60b415474ed 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -139,4 +139,12 @@ 0 72 0x4 0 73 0x4>; }; + + pfc: pfc@e6050000 { + compatible = "renesas,pfc-r8a7740"; + reg = <0xe6050000 0x8000>, + <0xe605800c 0x20>; + gpio-controller; + #gpio-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 474373559bdcdb3b321cd5cce7efda18b7bd1adc..45ac404ab6d8b79b246f6f5724f3609b48bf58cb 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -32,4 +32,70 @@ reg = <0xfe438000 0x1000>, <0xfe430000 0x100>; }; + + gpio0: gpio@ffc40000 { + compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + reg = <0xffc40000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 103 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio1: gpio@ffc41000 { + compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + reg = <0xffc41000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 103 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@ffc42000 { + compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + reg = <0xffc42000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 103 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@ffc43000 { + compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + reg = <0xffc43000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 103 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@ffc44000 { + compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + reg = <0xffc44000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 103 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 27>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + pfc: pfc@fffc0000 { + compatible = "renesas,pfc-r8a7778"; + reg = <0xfffc000 0x118>; + #gpio-range-cells = <3>; + }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts index 72be4c87cfb5d06d7943ea64220b97fce59c076b..b64705be258dd850b2240c469bcc3b85c6264624 100644 --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -11,6 +11,7 @@ /dts-v1/; /include/ "r8a7779.dtsi" +#include / { model = "marzen"; @@ -37,6 +38,9 @@ lan0@18000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x18000000 0x100>; + pinctrl-0 = <&lan0_pins>; + pinctrl-names = "default"; + phy-mode = "mii"; interrupt-parent = <&gic>; interrupts = <0 28 0x4>; @@ -44,4 +48,49 @@ vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; }; + + leds { + compatible = "gpio-leds"; + led2 { + gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + }; + led3 { + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + }; + led4 { + gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pfc { + pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>; + pinctrl-names = "default"; + + lan0_pins: lan0 { + intc { + renesas,groups = "intc_irq1_b"; + renesas,function = "intc"; + }; + lbsc { + renesas,groups = "lbsc_ex_cs0"; + renesas,function = "lbsc"; + }; + }; + + scif2_pins: scif2 { + renesas,groups = "scif2_data_c"; + renesas,function = "scif2"; + }; + + scif4_pins: scif4 { + renesas,groups = "scif4_data"; + renesas,function = "scif4"; + }; + + sdhi0_pins: sdhi0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", + "sdhi0_wp"; + renesas,function = "sdhi0"; + }; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 7f146c6bf7569dcf01d8c3a1933ba60eb736f579..e9fbe3d572d79ae7a347942c8e233f93b84bb334 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -48,6 +48,90 @@ <0xf0000100 0x100>; }; + gpio0: gpio@ffc40000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc40000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 141 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio1: gpio@ffc41000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc41000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 142 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@ffc42000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc42000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 143 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@ffc43000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc43000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 144 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@ffc44000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc44000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 145 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio5: gpio@ffc45000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc45000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 146 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio6: gpio@ffc46000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc46000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 147 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 9>; + #interrupt-cells = <2>; + interrupt-controller; + }; + irqpin0: irqpin@fe780010 { compatible = "renesas,intc-irqpin"; #interrupt-cells = <2>; @@ -101,6 +185,12 @@ interrupts = <0 81 0x4>; }; + pfc: pfc@fffc0000 { + compatible = "renesas,pfc-r8a7779"; + reg = <0xfffc0000 0x23c>; + #gpio-range-cells = <3>; + }; + thermal@ffc48000 { compatible = "renesas,rcar-thermal"; reg = <0xffc48000 0x38>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 339d9b11721c0a235aee6dc297de37f96a9c981c..3b879e7c697c336748d5f35adf6744c6d7e14458 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -38,6 +38,78 @@ interrupts = <1 9 0xf04>; }; + gpio0: gpio@ffc40000 { + compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + reg = <0 0xffc40000 0 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 4 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio1: gpio@ffc41000 { + compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + reg = <0 0xffc41000 0 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 5 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@ffc42000 { + compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + reg = <0 0xffc42000 0 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 6 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@ffc43000 { + compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + reg = <0 0xffc43000 0 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 7 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@ffc44000 { + compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + reg = <0 0xffc44000 0 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 8 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio5: gpio@ffc45000 { + compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + reg = <0 0xffc45000 0 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 9 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 13 0xf08>, @@ -54,4 +126,64 @@ interrupt-parent = <&gic>; interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>; }; + + mmcif0: mmcif@ee200000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 169 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + mmcif1: mmcif@ee220000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 170 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + pfc: pfc@e6060000 { + compatible = "renesas,pfc-r8a7790"; + reg = <0 0xe6060000 0 0x250>; + #gpio-range-cells = <3>; + }; + + sdhi0: sdhi@ee100000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee100000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 165 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi1: sdhi@ee120000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee120000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 166 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi2: sdhi@ee140000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 167 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi3: sdhi@ee160000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 168 4>; + cap-sd-highspeed; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index a1d5e25a66986492e3d44f5348102c64a6b3658a..ff63fbbd18ab5cccf346a9e47590b9baa3e7bfe9 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -48,6 +48,11 @@ }; }; + pmu { + compatible = "arm,cortex-a5-pmu"; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>; + }; + memory { reg = <0x20000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi index 7bf020ecadf590d3dd6986830bce1f758dbc910e..249f65be2a5070ca38e2112537160d20265dc47a 100644 --- a/arch/arm/boot/dts/sh7372.dtsi +++ b/arch/arm/boot/dts/sh7372.dtsi @@ -23,4 +23,12 @@ reg = <0x0>; }; }; + + pfc: pfc@e6050000 { + compatible = "renesas,pfc-sh7372"; + reg = <0xe6050000 0x8000>, + <0xe605801c 0x1c>; + gpio-controller; + #gpio-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index b6f759e830ed3fb35dfc4284f838d776aa6c760f..b99e890def54d7e462da5a3065d0aa565295a910 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sh73a0.dtsi" +#include / { model = "KZM-A9-GT"; @@ -58,6 +59,24 @@ regulator-boot-on; }; + vmmc_sdhi0: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pfc 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vmmc_sdhi2: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pfc 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + lan9220@10000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x10000000 0x100>; @@ -70,6 +89,22 @@ vddvario-supply = <®_1p8v>; vdd33a-supply = <®_3p3v>; }; + + leds { + compatible = "gpio-leds"; + led1 { + gpios = <&pfc 20 GPIO_ACTIVE_LOW>; + }; + led2 { + gpios = <&pfc 21 GPIO_ACTIVE_LOW>; + }; + led3 { + gpios = <&pfc 22 GPIO_ACTIVE_LOW>; + }; + led4 { + gpios = <&pfc 23 GPIO_ACTIVE_LOW>; + }; + }; }; &i2c0 { @@ -145,20 +180,71 @@ }; }; +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; +}; + &mmcif { + pinctrl-0 = <&mmcif_pins>; + pinctrl-names = "default"; + bus-width = <8>; vmmc-supply = <®_1p8v>; status = "okay"; }; +&pfc { + pinctrl-0 = <&scifa4_pins>; + pinctrl-names = "default"; + + i2c3_pins: i2c3 { + renesas,groups = "i2c3_1"; + renesas,function = "i2c3"; + }; + + mmcif_pins: mmcif { + mux { + renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; + renesas,function = "mmc0"; + }; + cfg { + renesas,groups = "mmc0_data8_0"; + renesas,pins = "PORT279"; + bias-pull-up; + }; + }; + + scifa4_pins: scifa4 { + renesas,groups = "scifa4_data", "scifa4_ctrl"; + renesas,function = "scifa4"; + }; + + sdhi0_pins: sdhi0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; + renesas,function = "sdhi0"; + }; + + sdhi2_pins: sdhi2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; + }; +}; + &sdhi0 { - vmmc-supply = <®_3p3v>; + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vmmc_sdhi0>; bus-width = <4>; status = "okay"; }; &sdhi2 { - vmmc-supply = <®_3p3v>; + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vmmc_sdhi2>; bus-width = <4>; broken-cd; status = "okay"; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index b9775025600364384556b5206db1128f8ecc2398..86e79feb7560f95648cad06deafb9e51f5373c26 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -222,4 +222,12 @@ cap-sd-highspeed; status = "disabled"; }; + + pfc: pfc@e6050000 { + compatible = "renesas,pfc-sh73a0"; + reg = <0xe6050000 0x8000>, + <0xe605801c 0x1c>; + gpio-controller; + #gpio-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/skeleton64.dtsi b/arch/arm/boot/dts/skeleton64.dtsi index 15994158a998e057df057e218097aa0370fdfb6e..b5d7f36f33deeb5cbdc1d7c5879d1c185c40d559 100644 --- a/arch/arm/boot/dts/skeleton64.dtsi +++ b/arch/arm/boot/dts/skeleton64.dtsi @@ -9,5 +9,5 @@ #size-cells = <2>; chosen { }; aliases { }; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; reg = <0 0 0 0>; }; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index bee62a2cf6d653f9f151651ca8379d86d5a91f43..e273fa993b8c82aa696273be311a145d38d21e5d 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -476,25 +476,25 @@ }; timer0: timer0@ffc08000 { - compatible = "snps,dw-apb-timer-sp"; + compatible = "snps,dw-apb-timer"; interrupts = <0 167 4>; reg = <0xffc08000 0x1000>; }; timer1: timer1@ffc09000 { - compatible = "snps,dw-apb-timer-sp"; + compatible = "snps,dw-apb-timer"; interrupts = <0 168 4>; reg = <0xffc09000 0x1000>; }; timer2: timer2@ffd00000 { - compatible = "snps,dw-apb-timer-osc"; + compatible = "snps,dw-apb-timer"; interrupts = <0 169 4>; reg = <0xffd00000 0x1000>; }; timer3: timer3@ffd01000 { - compatible = "snps,dw-apb-timer-osc"; + compatible = "snps,dw-apb-timer"; interrupts = <0 170 4>; reg = <0xffd01000 0x1000>; }; diff --git a/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..e0799966bc25e7fc34c19f1d2631b74c49e49f44 --- /dev/null +++ b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi @@ -0,0 +1,196 @@ +/* + * Copyright 2012 ST-Ericsson + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include "ste-nomadik-pinctrl.dtsi" + +/ { + soc { + pinctrl { + uart0 { + uart0_default_mux: uart0_mux { + default_mux { + ste,function = "u0"; + ste,pins = "u0_a_1"; + }; + }; + + uart0_default_mode: uart0_default { + default_cfg1 { + ste,pins = "GPIO0", "GPIO2"; + ste,config = <&in_pu>; + }; + + default_cfg2 { + ste,pins = "GPIO1", "GPIO3"; + ste,config = <&out_hi>; + }; + }; + + uart0_sleep_mode: uart0_sleep { + sleep_cfg1 { + ste,pins = "GPIO0", "GPIO2"; + ste,config = <&slpm_in_pu>; + }; + + sleep_cfg2 { + ste,pins = "GPIO1", "GPIO3"; + ste,config = <&slpm_out_hi>; + }; + }; + }; + + uart2 { + uart2_default_mode: uart2_default { + default_mux { + ste,function = "u2"; + ste,pins = "u2txrx_a_1"; + }; + + default_cfg1 { + ste,pins = "GPIO120"; + ste,config = <&in_pu>; + }; + + default_cfg2 { + ste,pins = "GPIO121"; + ste,config = <&out_hi>; + }; + }; + + uart2_sleep_mode: uart2_sleep { + sleep_cfg1 { + ste,pins = "GPIO120"; + ste,config = <&slpm_in_pu>; + }; + + sleep_cfg2 { + ste,pins = "GPIO121"; + ste,config = <&slpm_out_hi>; + }; + }; + }; + + i2c0 { + i2c0_default_mux: i2c_mux { + default_mux { + ste,function = "i2c0"; + ste,pins = "i2c0_a_1"; + }; + }; + + i2c0_default_mode: i2c_default { + default_cfg1 { + ste,pins = "GPIO147", "GPIO148"; + ste,config = <&in_pu>; + }; + }; + + i2c0_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO147", "GPIO148"; + ste,config = <&slpm_in_pu>; + }; + }; + }; + + i2c1 { + i2c1_default_mux: i2c_mux { + default_mux { + ste,function = "i2c1"; + ste,pins = "i2c1_b_2"; + }; + }; + + i2c1_default_mode: i2c_default { + default_cfg1 { + ste,pins = "GPIO16", "GPIO17"; + ste,config = <&in_pu>; + }; + }; + + i2c1_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO16", "GPIO17"; + ste,config = <&slpm_in_pu>; + }; + }; + }; + + i2c2 { + i2c2_default_mux: i2c_mux { + default_mux { + ste,function = "i2c2"; + ste,pins = "i2c2_b_2"; + }; + }; + + i2c2_default_mode: i2c_default { + default_cfg1 { + ste,pins = "GPIO10", "GPIO11"; + ste,config = <&in_pu>; + }; + }; + + i2c2_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO11", "GPIO11"; + ste,config = <&slpm_in_pu>; + }; + }; + }; + + i2c4 { + i2c4_default_mux: i2c_mux { + default_mux { + ste,function = "i2c4"; + ste,pins = "i2c4_b_2"; + }; + }; + + i2c4_default_mode: i2c_default { + default_cfg1 { + ste,pins = "GPIO122", "GPIO123"; + ste,config = <&in_pu>; + }; + }; + + i2c4_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO122", "GPIO123"; + ste,config = <&slpm_in_pu>; + }; + }; + }; + + i2c5 { + i2c5_default_mux: i2c_mux { + default_mux { + ste,function = "i2c5"; + ste,pins = "i2c5_c_2"; + }; + }; + + i2c5_default_mode: i2c_default { + default_cfg1 { + ste,pins = "GPIO118", "GPIO119"; + ste,config = <&in_pu>; + }; + }; + + i2c5_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO118", "GPIO119"; + ste,config = <&slpm_in_pu>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts new file mode 100644 index 0000000000000000000000000000000000000000..7f3baf51a3a9e933d3a47dce18d2ca102c104a9b --- /dev/null +++ b/arch/arm/boot/dts/ste-ccu8540.dts @@ -0,0 +1,86 @@ +/* + * Copyright 2013 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "ste-dbx5x0.dtsi" +#include "ste-ccu8540-pinctrl.dtsi" + +/ { + model = "ST-Ericsson U8540 platform with Device Tree"; + compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; + + memory@0 { + reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; + }; + + soc { + pinctrl { + compatible = "stericsson,db8540-pinctrl"; + }; + + prcmu@80157000 { + reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>; + reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; + }; + + uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>; + pinctrl-1 = <&uart0_sleep_mode>; + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart2_default_mode>; + pinctrl-1 = <&uart2_sleep_mode>; + status = "okay"; + }; + + i2c0: i2c@80004000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>; + pinctrl-1 = <&i2c0_sleep_mode>; + }; + + i2c1: i2c@80122000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>; + pinctrl-1 = <&i2c1_sleep_mode>; + }; + + i2c2: i2c@80128000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c2_default_mux>, <&i2c2_default_mode>; + pinctrl-1 = <&i2c2_sleep_mode>; + }; + + i2c3: i2c@80110000 { + status = "disabled"; + }; + + i2c4: i2c@8012a000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c4_default_mux>, <&i2c4_default_mode>; + pinctrl-1 = <&i2c4_sleep_mode>; + }; + + i2c5: i2c@80001000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c5_default_mux>, <&i2c5_default_mode>; + pinctrl-1 = <&i2c5_sleep_mode>; + }; + }; +}; diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts similarity index 98% rename from arch/arm/boot/dts/ccu9540.dts rename to arch/arm/boot/dts/ste-ccu9540.dts index ed29ec7288e4ca32c607a079b1657e5010c3c958..229508750890f53644f72c5c068f74ae29b3dab6 100644 --- a/arch/arm/boot/dts/ccu9540.dts +++ b/arch/arm/boot/dts/ste-ccu9540.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -#include "dbx5x0.dtsi" +#include "ste-dbx5x0.dtsi" / { model = "ST-Ericsson CCU9540 platform with Device Tree"; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi similarity index 96% rename from arch/arm/boot/dts/dbx5x0.dtsi rename to arch/arm/boot/dts/ste-dbx5x0.dtsi index a1529455f0813b0bec139ae9d3266e5e50531119..1c1091eedadec293f619d5843f46506e31f14ffb 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -245,7 +245,7 @@ <22 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; status = "disabled"; - }; + }; db8500-prcmu-regulators { compatible = "stericsson,db8500-prcmu-regulator"; @@ -457,8 +457,36 @@ stericsson,earpeice-cmv = <950>; /* Units in mV. */ }; + ext_regulators: ab8500-ext-regulators { + compatible = "stericsson,ab8500-ext-regulator"; + + ab8500_ext1_reg: ab8500_ext1 { + regulator-compatible = "ab8500_ext1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ab8500_ext2_reg: ab8500_ext2 { + regulator-compatible = "ab8500_ext2"; + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; + regulator-boot-on; + regulator-always-on; + }; + + ab8500_ext3_reg: ab8500_ext3 { + regulator-compatible = "ab8500_ext3"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + }; + ab8500-regulators { compatible = "stericsson,ab8500-regulator"; + vin-supply = <&ab8500_ext3_reg>; // supplies to the display/camera ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/ste-href.dtsi similarity index 99% rename from arch/arm/boot/dts/href.dtsi rename to arch/arm/boot/dts/ste-href.dtsi index 9db41b9d83588323ab7981d6144e56e6e94a2856..370e03f5e7b2c8bcd416dd871b89c44e5e9ddfb8 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -10,7 +10,7 @@ */ #include -#include "dbx5x0.dtsi" +#include "ste-dbx5x0.dtsi" / { memory { diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/ste-hrefprev60.dts similarity index 92% rename from arch/arm/boot/dts/hrefprev60.dts rename to arch/arm/boot/dts/ste-hrefprev60.dts index c6bb07df2d1dd3670e4cd49a199300eb5d178f78..d8d3b99ab00752be80d78ddf4709a9a888cee4e6 100644 --- a/arch/arm/boot/dts/hrefprev60.dts +++ b/arch/arm/boot/dts/ste-hrefprev60.dts @@ -10,9 +10,9 @@ */ /dts-v1/; -#include "dbx5x0.dtsi" -#include "href.dtsi" -#include "stuib.dtsi" +#include "ste-dbx5x0.dtsi" +#include "ste-href.dtsi" +#include "ste-stuib.dtsi" / { model = "ST-Ericsson HREF (pre-v60) platform with Device Tree"; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/ste-hrefv60plus.dts similarity index 98% rename from arch/arm/boot/dts/hrefv60plus.dts rename to arch/arm/boot/dts/ste-hrefv60plus.dts index 3d580d6447f9e68a17abd5ab61ecea85b7272a6b..6e52ebbf113fdd12c0b6fa5d768289df4bb7e5f3 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus.dts @@ -10,9 +10,9 @@ */ /dts-v1/; -#include "dbx5x0.dtsi" -#include "href.dtsi" -#include "stuib.dtsi" +#include "ste-dbx5x0.dtsi" +#include "ste-href.dtsi" +#include "ste-stuib.dtsi" / { model = "ST-Ericsson HREF (v60+) platform with Device Tree"; diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..efddee9403c424b1bb2c0e21d027fae10fc13808 --- /dev/null +++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi @@ -0,0 +1,95 @@ +/* + * Copyright 2012 ST-Ericsson + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include + +/ { + in_nopull: in_nopull { + ste,input = ; + }; + + in_pu: input_pull_up { + ste,input = ; + }; + + in_pd: input_pull_down { + ste,input = ; + }; + + out_hi: output_high { + ste,output = ; + }; + + out_lo: output_low { + ste,output = ; + }; + + gpio_out_lo: gpio_output_low { + ste,gpio = ; + ste,output = ; + }; + + slpm_in_pu: slpm_in_pu { + ste,sleep = ; + ste,sleep-input = ; + ste,sleep-wakeup = ; + }; + + slpm_in_wkup_pdis: slpm_in_wkup_pdis { + ste,sleep = ; + ste,sleep-input = ; + ste,sleep-wakeup = ; + ste,sleep-pull-disable = ; + }; + + slpm_out_lo: slpm_out_lo { + ste,sleep = ; + ste,sleep-output = ; + ste,sleep-wakeup = ; + }; + + slpm_out_hi: slpm_out_hi { + ste,sleep = ; + ste,sleep-output = ; + ste,sleep-wakeup = ; + }; + + slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis { + ste,sleep = ; + ste,sleep-output = ; + ste,sleep-wakeup = ; + ste,sleep-pull-disable = ; + }; + + slpm_out_wkup_pdis: slpm_out_wkup_pdis { + ste,sleep = ; + ste,sleep-output = ; + ste,sleep-wakeup = ; + ste,sleep-pull-disable = ; + }; + + in_wkup_pdis: in_wkup_pdis { + ste,sleep-input = ; + ste,sleep-wakeup = ; + ste,sleep-pull-disable = ; + }; + + out_hi_wkup_pdis: out_hi_wkup_pdis { + ste,sleep-output = ; + ste,sleep-wakeup = ; + ste,sleep-pull-disable = ; + }; + + out_wkup_pdis: out_wkup_pdis { + ste,sleep-output = ; + ste,sleep-wakeup = ; + ste,sleep-pull-disable = ; + }; +}; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index a3acfa7b3dc9c65fe6abded6a17a97aee3c4729e..9169d3025f39ed5fd2475f43f0d3cd261e71894d 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -140,18 +140,30 @@ }; }; i2c0 { + i2c0_default_mux: i2c0_mux { + i2c0_default_mux { + ste,function = "i2c0"; + ste,pins = "i2c0_a_1"; + }; + }; i2c0_default_mode: i2c0_default { i2c0_default_cfg { ste,pins = "GPIO62_D3", "GPIO63_D2"; - ste,input = <1>; + ste,input = <0>; }; }; }; i2c1 { + i2c1_default_mux: i2c1_mux { + i2c1_default_mux { + ste,function = "i2c1"; + ste,pins = "i2c1_a_1"; + }; + }; i2c1_default_mode: i2c1_default { i2c1_default_cfg { ste,pins = "GPIO53_L4", "GPIO54_L3"; - ste,input = <1>; + ste,input = <0>; }; }; }; @@ -159,7 +171,7 @@ i2c2_default_mode: i2c2_default { i2c2_default_cfg { ste,pins = "GPIO73_C21", "GPIO74_C20"; - ste,input = <1>; + ste,input = <0>; }; }; }; @@ -682,13 +694,17 @@ /* I2C0 connected to the STw4811 power management chip */ i2c0 { - compatible = "i2c-gpio"; - gpios = <&gpio1 31 0>, /* sda */ - <&gpio1 30 0>; /* scl */ + compatible = "st,nomadik-i2c", "arm,primecell"; + reg = <0x101f8000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <20>; + clock-frequency = <100000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&i2c0clk>, <&pclki2c0>; + clock-names = "mclk", "apb_pclk"; pinctrl-names = "default"; - pinctrl-0 = <&i2c0_default_mode>; + pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>; stw4811@2d { compatible = "st,stw4811"; @@ -698,13 +714,17 @@ /* I2C1 connected to various sensors */ i2c1 { - compatible = "i2c-gpio"; - gpios = <&gpio1 22 0>, /* sda */ - <&gpio1 21 0>; /* scl */ + compatible = "st,nomadik-i2c", "arm,primecell"; + reg = <0x101f7000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <21>; + clock-frequency = <100000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&i2c1clk>, <&pclki2c1>; + clock-names = "mclk", "apb_pclk"; pinctrl-names = "default"; - pinctrl-0 = <&i2c1_default_mode>; + pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>; camera@2d { compatible = "st,camera"; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/ste-snowball.dts similarity index 93% rename from arch/arm/boot/dts/snowball.dts rename to arch/arm/boot/dts/ste-snowball.dts index 49824be668450cf02f45ccd226d0243f5fd9dc8b..f1fc128e249dd7d0dfbd337aeb40fc0dbdcc2c69 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -#include "dbx5x0.dtsi" +#include "ste-dbx5x0.dtsi" / { model = "Calao Systems Snowball platform with device tree"; @@ -165,34 +165,6 @@ status = "okay"; }; - i2c@80004000 { - tc3589x@42 { - //compatible = "tc3589x"; - reg = <0x42>; - gpios = <&gpio6 25 0x4>; - interrupt-parent = <&gpio6>; - }; - tps61052@33 { - //compatible = "tps61052"; - reg = <0x33>; - }; - }; - - i2c@80128000 { - lp5521@33 { - // compatible = "lp5521"; - reg = <0x33>; - }; - lp5521@34 { - // compatible = "lp5521"; - reg = <0x34>; - }; - bh1780@29 { - // compatible = "rohm,bh1780gli"; - reg = <0x33>; - }; - }; - cpufreq-cooling { status = "okay"; }; @@ -310,6 +282,20 @@ compatible = "stericsson,ab8500-gpio"; }; + ext_regulators: ab8500-ext-regulators { + ab8500_ext1_reg: ab8500_ext1 { + regulator-name = "ab8500-ext-supply1"; + }; + + ab8500_ext2_reg_reg: ab8500_ext2 { + regulator-name = "ab8500-ext-supply2"; + }; + + ab8500_ext3_reg_reg: ab8500_ext3 { + regulator-name = "ab8500-ext-supply3"; + }; + }; + ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/ste-stuib.dtsi similarity index 100% rename from arch/arm/boot/dts/stuib.dtsi rename to arch/arm/boot/dts/ste-stuib.dtsi diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts new file mode 100644 index 0000000000000000000000000000000000000000..eb4d73b6a0904fafa03308e16eb4ce1389a8340a --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -0,0 +1,101 @@ +/* + * Copyright 2013 Emilio López + * + * Emilio López + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun4i-a10.dtsi" + +/ { + model = "Mele A1000"; + compatible = "mele,a1000", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + soc@01c00000 { + emac: ethernet@01c0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; + }; + + mdio@01c0b080 { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + pinctrl@01c20800 { + emac_power_pin_a1000: emac_power_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_a1000: led_pins@0 { + allwinner,pins = "PH10", "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_a1000>; + + red { + label = "a1000:red:usr"; + gpios = <&pio 7 10 0>; + }; + + blue { + label = "a1000:blue:usr"; + gpios = <&pio 7 20 0>; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_emac_3v3: emac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&emac_power_pin_a1000>; + regulator-name = "emac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 15 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 757c4cd900ee92e03fc5a85dad98866d56c3d83c..425a7db898c553b043798d953451cb9b00a5d146 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -26,7 +26,7 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc@01c20000 { + soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; pinctrl-0 = <&emac_pins_a>; @@ -76,12 +76,12 @@ pinctrl-0 = <&led_pins_cubieboard>; blue { - label = "cubieboard::blue"; + label = "cubieboard:blue:usr"; gpios = <&pio 7 21 0>; /* LED1 */ }; green { - label = "cubieboard::green"; + label = "cubieboard:green:usr"; gpios = <&pio 7 20 0>; /* LED2 */ linux,default-trigger = "heartbeat"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 3514b37d66bcd180df6e963a5d816e3446ef9379..b3ae51fa9372328f7fc9c7dee5eb577536f87bdb 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -22,7 +22,7 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc@01c20000 { + soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; pinctrl-0 = <&emac_pins_a>; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 078ed7f618d7910cc6030fdf9b288b3b124da065..0c1447c68059785cef99693b3c788c7281f4b9ba 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -22,7 +22,7 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc@01c20000 { + soc@01c00000 { uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index b2bd6e1242504bd47aadfda1dca25e7f0cb1b75c..c32770a28acfe823bf898bf2cf7388f22779aadc 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -160,11 +160,10 @@ }; }; - soc@01c20000 { + soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - reg = <0x01c20000 0x300000>; ranges; emac: ethernet@01c0b000 { diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 64dc0c42c43abca9b3c59d5a570381785f1575ef..3c9f8b3cd3e3cf44e0d0bdd13be5444e437a2fea 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -18,7 +18,7 @@ model = "Olimex A10s-Olinuxino Micro"; compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s"; - soc@01c20000 { + soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; pinctrl-0 = <&emac_pins_a>; @@ -60,6 +60,31 @@ pinctrl-0 = <&uart3_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + at24@50 { + compatible = "at,24c16"; + pagesize = <16>; + reg = <0x50>; + read-only; + }; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 2307ce827ae03c388f80f7ffe3075ae36f575d57..ee0ff9ba1bca16c592baa9882b63b4c003193c5d 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -157,11 +157,10 @@ }; }; - soc@01c20000 { + soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - reg = <0x01c20000 0x300000>; ranges; emac: ethernet@01c0b000 { @@ -229,6 +228,27 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB15", "PB16"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB17", "PB18"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -282,5 +302,38 @@ clocks = <&apb1_gates 19>; status = "disabled"; }; + + i2c0: i2c@01c2ac00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <7>; + clocks = <&apb1_gates 0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@01c2b000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <8>; + clocks = <&apb1_gates 1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@01c2b400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <9>; + clocks = <&apb1_gates 2>; + clock-frequency = <100000>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 80497e376706ca930a1eb84cf6297f6277e09ce3..9e508dcc4245da295d28a719edeb866108e32354 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -22,7 +22,7 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc@01c20000 { + soc@01c00000 { pinctrl@01c20800 { led_pins_olinuxino: led_pins@0 { allwinner,pins = "PG9"; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 7363211daf8446754a20074a9ffd2cf99803c535..f6091dc0936ce68e68b6a9ceac4f9d720b9a57fa 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -150,11 +150,10 @@ }; }; - soc@01c20000 { + soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - reg = <0x01c20000 0x300000>; ranges; intc: interrupt-controller@01c20400 { diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts new file mode 100644 index 0000000000000000000000000000000000000000..99c4b1847cab6f004e3d9d468197edafaff650e4 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun6i-a31.dtsi" + +/ { + model = "WITS A31 Colombus Evaluation Board"; + compatible = "wits,colombus", "allwinner,sun6i-a31"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc@01c00000 { + uart0: serial@01c28000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..4d076ec248858c64406d4e3cfde50f63e05e9c96 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -0,0 +1,156 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + timer@01c20c00 { + compatible = "allwinner,sun4i-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <0 18 1>, + <0 19 1>, + <0 20 1>, + <0 21 1>, + <0 22 1>; + clocks = <&osc>; + }; + + wdt1: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-wdt"; + reg = <0x01c20ca0 0x20>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <0 0 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <0 1 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <0 2 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <0 3 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart4: serial@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <0 4 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart5: serial@01c29400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29400 0x400>; + interrupts = <0 5 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 0xf04>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts new file mode 100644 index 0000000000000000000000000000000000000000..d3395846491c79ecd37acc2d2f79d5c9e891809c --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -0,0 +1,34 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" + +/ { + model = "Olimex A20-Olinuxino Micro"; + compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20"; + + soc@01c00000 { + uart0: serial@01c28000 { + status = "okay"; + }; + + uart6: serial@01c29800 { + status = "okay"; + }; + + uart7: serial@01c29c00 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..33391517118cd396d7acb7d421008b50ebea0a3f --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -0,0 +1,172 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M@01c20050 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + osc32k: osc32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + timer@01c20c00 { + compatible = "allwinner,sun4i-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <0 22 1>, + <0 23 1>, + <0 24 1>, + <0 25 1>, + <0 67 1>, + <0 68 1>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-wdt"; + reg = <0x01c20c90 0x10>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <0 1 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <0 2 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <0 3 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <0 4 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart4: serial@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <0 17 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart5: serial@01c29400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29400 0x400>; + interrupts = <0 18 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart6: serial@01c29800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29800 0x400>; + interrupts = <0 19 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart7: serial@01c29c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29c00 0x400>; + interrupts = <0 20 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 0xf04>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index cb640eb6c9322db11ed2653c659d8c2d1f983b41..60230288884b663ae8a17a32d3e1bda66ba4125b 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -791,7 +791,7 @@ regulator-boot-on; }; - dcdc3 { + tps65090_dcdc3_reg: dcdc3 { regulator-name = "vdd-ao"; regulator-always-on; regulator-boot-on; @@ -836,6 +836,182 @@ }; }; }; + + palmas: tps65913 { + compatible = "ti,palmas"; + reg = <0x58>; + interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + palmas_gpio: gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + pmic { + compatible = "ti,tps65913-pmic", "ti,palmas-pmic"; + smps1-in-supply = <&tps65090_dcdc3_reg>; + smps3-in-supply = <&tps65090_dcdc3_reg>; + smps4-in-supply = <&tps65090_dcdc2_reg>; + smps7-in-supply = <&tps65090_dcdc2_reg>; + smps8-in-supply = <&tps65090_dcdc2_reg>; + smps9-in-supply = <&tps65090_dcdc2_reg>; + ldo1-in-supply = <&tps65090_dcdc2_reg>; + ldo2-in-supply = <&tps65090_dcdc2_reg>; + ldo3-in-supply = <&palmas_smps3_reg>; + ldo4-in-supply = <&tps65090_dcdc2_reg>; + ldo5-in-supply = <&vdd_ac_bat_reg>; + ldo6-in-supply = <&tps65090_dcdc2_reg>; + ldo7-in-supply = <&tps65090_dcdc2_reg>; + ldo8-in-supply = <&tps65090_dcdc3_reg>; + ldo9-in-supply = <&palmas_smps9_reg>; + ldoln-in-supply = <&tps65090_dcdc1_reg>; + ldousb-in-supply = <&tps65090_dcdc1_reg>; + + regulators { + smps12 { + regulator-name = "vddio-ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + palmas_smps3_reg: smps3 { + regulator-name = "vddio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45 { + regulator-name = "vdd-core"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + smps457 { + regulator-name = "vdd-core"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8 { + regulator-name = "avdd-pll"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + palmas_smps9_reg: smps9 { + regulator-name = "sdhci-vdd-sd-slot"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo1 { + regulator-name = "avdd-cam1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo2 { + regulator-name = "avdd-cam2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo3 { + regulator-name = "avdd-dsi-csi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "vpp-fuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo6 { + regulator-name = "vdd-sensor-2v85"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo7 { + regulator-name = "vdd-af-cam1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo8 { + regulator-name = "vdd-rtc"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + ti,enable-ldo8-tracking; + }; + + ldo9 { + regulator-name = "vddio-sdmmc-2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln { + regulator-name = "hvdd-usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldousb { + regulator-name = "avdd-usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + regen1 { + regulator-name = "rail-3v3"; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + regen2 { + regulator-name = "rail-5v0"; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 0>; + }; + }; }; spi@7000da00 { @@ -850,6 +1026,13 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; ahub { @@ -870,6 +1053,15 @@ non-removable; }; + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <&usb3_vbus_reg>; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; @@ -883,6 +1075,35 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + + home { + label = "Home"; + gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + linux,code = <102>; /* KEY_HOME */ + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + + volume_down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; + linux,code = <114>; /* KEY_VOLUMEDOWN */ + }; + + volume_up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; + linux,code = <115>; /* KEY_VOLUMEUP */ + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -951,6 +1172,16 @@ gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; vin-supply = <&tps65090_dcdc1_reg>; }; + + vdd_cam_1v8_reg: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "vdd_cam_1v8_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&palmas_gpio 6 0>; + }; }; sound { @@ -964,7 +1195,9 @@ "Speakers", "SPORP", "Speakers", "SPORN", "Speakers", "SPOLP", - "Speakers", "SPOLN"; + "Speakers", "SPOLN", + "Mic Jack", "MICBIAS1", + "IN2P", "Mic Jack"; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&rt5640>; diff --git a/arch/arm/boot/dts/tegra114-pluto.dts b/arch/arm/boot/dts/tegra114-pluto.dts deleted file mode 100644 index d5f8d3e0bde2344cc00bd1583aae1ce8b7501692..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/tegra114-pluto.dts +++ /dev/null @@ -1,33 +0,0 @@ -/dts-v1/; - -#include "tegra114.dtsi" - -/ { - model = "NVIDIA Tegra114 Pluto evaluation board"; - compatible = "nvidia,pluto", "nvidia,tegra114"; - - memory { - reg = <0x80000000 0x40000000>; - }; - - serial@70006300 { - status = "okay"; - }; - - pmc { - nvidia,invert-interrupt; - }; - - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; -}; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index abf6c40d28c616f4ddabee03d81188a8657aca30..2905145d8e59a4ad9c5d3ff88bb6fcbb10593b2e 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -430,6 +430,68 @@ status = "disable"; }; + usb@7d000000 { + compatible = "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x7d000000 0x4000>; + interrupts = ; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA114_CLK_USBD>; + nvidia,phy = <&phy1>; + status = "disabled"; + }; + + phy1: usb-phy@7d000000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d000000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA114_CLK_USBD>, + <&tegra_car TEGRA114_CLK_PLL_U>, + <&tegra_car TEGRA114_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <0>; + nvidia,xcvr-lsrslew = <3>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,xcvr-hsslew = <12>; + status = "disabled"; + }; + + usb@7d008000 { + compatible = "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x7d008000 0x4000>; + interrupts = ; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA114_CLK_USB3>; + nvidia,phy = <&phy3>; + status = "disabled"; + }; + + phy3: usb-phy@7d008000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d008000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA114_CLK_USB3>, + <&tegra_car TEGRA114_CLK_PLL_U>, + <&tegra_car TEGRA114_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <0>; + nvidia,xcvr-lsrslew = <3>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,xcvr-hsslew = <12>; + status = "disabled"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 5592be6f2f7a7ad58cf9eb3cf0cd17cd38e207f8..d5c9bca01232fe40516b2dcd67a2561ebbfa7d50 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -363,7 +363,7 @@ }; pmc { - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; nvidia,core-pwr-good-time = <3845 3845>; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index d9f89cd879a7b860bd97981310bcd7b18f4d9b23..e156ab30e76343b37271b7f650e71b55d263be85 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -335,7 +335,7 @@ regulator-always-on; }; - ldo0 { + pci_clk_reg: ldo0 { regulator-name = "vdd_ldo0,vddio_pex_clk"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -417,7 +417,7 @@ pmc { nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; nvidia,core-pwr-good-time = <3845 3845>; @@ -425,6 +425,20 @@ nvidia,sys-clock-req-active-high; }; + pcie-controller { + pex-clk-supply = <&pci_clk_reg>; + vdd-supply = <&pci_vdd_reg>; + status = "okay"; + + pci@1,0 { + status = "okay"; + }; + + pci@2,0 { + status = "okay"; + }; + }; + usb@c5000000 { status = "okay"; }; @@ -643,7 +657,7 @@ enable-active-high; }; - regulator@3 { + pci_vdd_reg: regulator@3 { compatible = "regulator-fixed"; reg = <3>; regulator-name = "vdd_1v05"; @@ -651,8 +665,6 @@ regulator-max-microvolt = <1050000>; gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; enable-active-high; - /* Hack until board-harmony-pcie.c is removed */ - status = "disabled"; }; regulator@4 { diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index cfd12763b1b2a605f5b950b2794e5fadafcaaeb4..8d71fc9d8a2f6cca72ef5f04d1fe5517ffbc5de0 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -417,7 +417,7 @@ pmc { nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; nvidia,cpu-pwr-off-time = <0>; nvidia,core-pwr-good-time = <3845 3845>; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 40e6fb280333ec190864a0c3ef55ba6007371ac4..315aae26c3cdb1e2ed84f741e8669cfadf870524 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -518,7 +518,7 @@ pmc { nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; nvidia,core-pwr-good-time = <3845 3845>; @@ -566,7 +566,6 @@ usb@c5000000 { status = "okay"; - nvidia,vbus-gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; dr_mode = "otg"; }; @@ -829,7 +828,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 24 0>; /* PD0 */ + gpio = <&gpio TEGRA_GPIO(D, 0) 0>; regulator-always-on; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index c54faae7cfb31d25d68ff7802a81c5486312f479..7726dab3d08d520c4656b11a558b905b842f909b 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -366,7 +366,7 @@ regulator-always-on; }; - ldo0 { + pci_clk_reg: ldo0 { regulator-name = "vdd_ldo0,vddio_pex_clk"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -459,7 +459,7 @@ pmc { nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; nvidia,core-pwr-good-time = <3845 3845>; @@ -467,6 +467,11 @@ nvidia,sys-clock-req-active-high; }; + pcie-controller { + pex-clk-supply = <&pci_clk_reg>; + vdd-supply = <&pci_vdd_reg>; + }; + usb@c5008000 { status = "okay"; }; @@ -509,5 +514,15 @@ regulator-max-microvolt = <5000000>; regulator-always-on; }; + + pci_vdd_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_1v05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&pmic 2 0>; + enable-active-high; + }; }; }; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index c572c43751b180ac3e6112f0110a89dd046654d7..3ada3cb67f07bd32689ddc3f780f45c9541faa74 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -32,6 +32,14 @@ }; }; + pcie-controller { + status = "okay"; + + pci@1,0 { + status = "okay"; + }; + }; + sound { compatible = "ad,tegra-audio-wm8903-tec", "nvidia,tegra-audio-wm8903"; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 37c93d3c4812ec65d9ef7689bb173757d37d9060..78deea5c0d217342979e1940cdaa912f9d53696a 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -302,7 +302,7 @@ }; pmc { - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; nvidia,core-pwr-good-time = <3845 3845>; @@ -310,9 +310,18 @@ nvidia,sys-clock-req-active-high; }; + pcie-controller { + status = "okay"; + pex-clk-supply = <&pci_clk_reg>; + vdd-supply = <&pci_vdd_reg>; + + pci@1,0 { + status = "okay"; + }; + }; + usb@c5000000 { status = "okay"; - nvidia,vbus-gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; }; usb-phy@c5000000 { @@ -411,10 +420,28 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 170 0>; /* PV2 */ + gpio = <&gpio TEGRA_GPIO(V, 2) 0>; regulator-always-on; regulator-boot-on; }; + + pci_clk_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "pci_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pci_vdd_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "pci_vdd"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 7f8c28d1121fa9e6685b6ec2bd69755b405222e7..aab872cd05300cd3084a3cb3e3edb11bdd757b90 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -494,7 +494,7 @@ pmc { nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; nvidia,cpu-pwr-off-time = <100>; nvidia,core-pwr-good-time = <3845 3845>; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index a3d0ebad78a1137eca61fea4781a178af0d516cc..d33a73cf167c42b295b5b8252608176888759875 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -497,7 +497,7 @@ pmc { nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; nvidia,cpu-pwr-off-time = <1000>; nvidia,core-pwr-good-time = <0 3845>; @@ -509,7 +509,6 @@ usb@c5000000 { status = "okay"; - nvidia,vbus-gpio = <&tca6416 0 GPIO_ACTIVE_HIGH>; }; usb-phy@c5000000 { @@ -519,7 +518,6 @@ usb@c5008000 { status = "okay"; - nvidia,vbus-gpio = <&tca6416 1 GPIO_ACTIVE_HIGH>; }; usb-phy@c5008000 { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 9653fd8288d2c53f77336111ce9a2396e04eca82..df40b54fd8bca58eeeb610d6a5c755d4fec51aae 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -455,6 +455,61 @@ #size-cells = <0>; }; + pcie-controller { + compatible = "nvidia,tegra20-pcie"; + device_type = "pci"; + reg = <0x80003000 0x00000800 /* PADS registers */ + 0x80003800 0x00000200 /* AFI registers */ + 0x90000000 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */ + 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */ + 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0xa0000000 0xa0000000 0 0x08000000 /* non-prefetchable memory */ + 0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */ + + clocks = <&tegra_car TEGRA20_CLK_PEX>, + <&tegra_car TEGRA20_CLK_AFI>, + <&tegra_car TEGRA20_CLK_PCIE_XCLK>, + <&tegra_car TEGRA20_CLK_PLL_E>; + clock-names = "pex", "afi", "pcie_xclk", "pll_e"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + }; + usb@c5000000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5000000 0x4000>; @@ -477,13 +532,13 @@ <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; nvidia,has-legacy-mode; - hssync_start_delay = <9>; - idle_wait_delay = <17>; - elastic_limit = <16>; - term_range_adj = <6>; - xcvr_setup = <9>; - xcvr_lsfslew = <1>; - xcvr_lsrslew = <1>; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <1>; + nvidia,xcvr-lsrslew = <1>; status = "disabled"; }; @@ -527,13 +582,13 @@ <&tegra_car TEGRA20_CLK_CLK_M>, <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; - hssync_start_delay = <9>; - idle_wait_delay = <17>; - elastic_limit = <16>; - term_range_adj = <6>; - xcvr_setup = <9>; - xcvr_lsfslew = <2>; - xcvr_lsrslew = <2>; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 87c5f7b7c271fd7c8f58309b75d0168619919b2d..08cad696e89fbd648c0c76a6f42c5fcbc2594cc5 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -10,6 +10,40 @@ reg = <0x80000000 0x7ff00000>; }; + pcie-controller { + status = "okay"; + pex-clk-supply = <&sys_3v3_pexs_reg>; + vdd-supply = <&ldo1_reg>; + avdd-supply = <&ldo2_reg>; + + pci@1,0 { + status = "okay"; + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + nvidia,num-lanes = <2>; + }; + + pci@3,0 { + status = "okay"; + nvidia,num-lanes = <2>; + }; + }; + + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&sys_3v3_reg>; + pll-supply = <&vio_reg>; + + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + nvidia,ddc-i2c-bus = <&hdmiddc>; + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -76,6 +110,11 @@ nvidia,pull = <0>; nvidia,tristate = <0>; }; + pex_l1_prsnt_n_pdd4 { + nvidia,pins = "pex_l1_prsnt_n_pdd4", + "pex_l1_clkreq_n_pdd6"; + nvidia,pull = <2>; + }; sdio3 { nvidia,pins = "drive_sdio3"; nvidia,high-speed-mode = <0>; @@ -85,6 +124,10 @@ nvidia,slew-rate-rising = <1>; nvidia,slew-rate-falling = <1>; }; + gpv { + nvidia,pins = "drive_gpv"; + nvidia,pull-up-strength = <16>; + }; }; }; @@ -107,7 +150,7 @@ clock-frequency = <100000>; }; - i2c@7000c700 { + hdmiddc: i2c@7000c700 { status = "okay"; clock-frequency = <100000>; }; @@ -262,7 +305,7 @@ pmc { status = "okay"; nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; nvidia,cpu-pwr-off-time = <200>; nvidia,core-pwr-good-time = <3845 3845>; @@ -285,6 +328,15 @@ non-removable; }; + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + vbus-supply = <&usb3_vbus_reg>; + status = "okay"; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; @@ -357,7 +409,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v_in_reg>; }; @@ -369,7 +421,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v_in_reg>; }; @@ -421,7 +473,9 @@ nvidia,audio-routing = "Headphones", "HPOR", - "Headphones", "HPOL"; + "Headphones", "HPOL", + "Mic Jack", "MICBIAS1", + "IN2P", "Mic Jack"; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&rt5640>; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index f65b53d32416749244d1cc977d23c1e5bea64477..e19dbf238e5c8498878dc56492018585190830ce 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -31,6 +31,26 @@ reg = <0x80000000 0x40000000>; }; + pcie-controller { + status = "okay"; + pex-clk-supply = <&pex_hvdd_3v3_reg>; + vdd-supply = <&ldo1_reg>; + avdd-supply = <&ldo2_reg>; + + pci@1,0 { + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + status = "okay"; + nvidia,num-lanes = <1>; + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -173,19 +193,6 @@ gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; }; - tps62361 { - compatible = "ti,tps62361"; - reg = <0x60>; - - regulator-name = "tps62361-vout"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - ti,vsel0-state-high; - ti,vsel1-state-high; - }; - pmic: tps65911@2d { compatible = "ti,tps65911"; reg = <0x2d>; @@ -286,6 +293,26 @@ }; }; }; + + nct1008 { + compatible = "onnn,nct1008"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = ; + }; + + tps62361 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + }; }; spi@7000da00 { @@ -307,7 +334,7 @@ pmc { status = "okay"; nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; nvidia,cpu-pwr-off-time = <200>; nvidia,core-pwr-good-time = <3845 3845>; @@ -330,6 +357,15 @@ non-removable; }; + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + vbus-supply = <&usb3_vbus_reg>; + status = "okay"; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index d8783f0fae6354bd13a7939a7821d15bb830d054..0022c127e1d956c42badc2970887fca3b9d7511b 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -16,6 +16,76 @@ serial4 = &uarte; }; + pcie-controller { + compatible = "nvidia,tegra30-pcie"; + device_type = "pci"; + reg = <0x00003000 0x00000800 /* PADS registers */ + 0x00003800 0x00000200 /* AFI registers */ + 0x10000000 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */ + 0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */ + 0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x20000000 0x20000000 0 0x08000000 /* non-prefetchable memory */ + 0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */ + + clocks = <&tegra_car TEGRA30_CLK_PCIE>, + <&tegra_car TEGRA30_CLK_AFI>, + <&tegra_car TEGRA30_CLK_PCIEX>, + <&tegra_car TEGRA30_CLK_PLL_E>, + <&tegra_car TEGRA30_CLK_CML0>; + clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>; + reg = <0x001800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + }; + host1x { compatible = "nvidia,tegra30-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; @@ -561,6 +631,92 @@ status = "disabled"; }; + usb@7d000000 { + compatible = "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x7d000000 0x4000>; + interrupts = ; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USBD>; + nvidia,needs-double-reset; + nvidia,phy = <&phy1>; + status = "disabled"; + }; + + phy1: usb-phy@7d000000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d000000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USBD>, + <&tegra_car TEGRA30_CLK_PLL_U>, + <&tegra_car TEGRA30_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <51>; + nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <1>; + nvidia,xcvr-lsrslew = <1>; + nvidia,xcvr-hsslew = <32>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + status = "disabled"; + }; + + usb@7d004000 { + compatible = "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x7d004000 0x4000>; + interrupts = ; + phy_type = "ulpi"; + clocks = <&tegra_car TEGRA30_CLK_USB2>; + nvidia,phy = <&phy2>; + status = "disabled"; + }; + + phy2: usb-phy@7d004000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d004000 0x4000>; + phy_type = "ulpi"; + clocks = <&tegra_car TEGRA30_CLK_USB2>, + <&tegra_car TEGRA30_CLK_PLL_U>, + <&tegra_car TEGRA30_CLK_CDEV2>; + clock-names = "reg", "pll_u", "ulpi-link"; + status = "disabled"; + }; + + usb@7d008000 { + compatible = "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x7d008000 0x4000>; + interrupts = ; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USB3>; + nvidia,phy = <&phy3>; + status = "disabled"; + }; + + phy3: usb-phy@7d008000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d008000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USB3>, + <&tegra_car TEGRA30_CLK_PLL_U>, + <&tegra_car TEGRA30_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <51>; + nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + nvidia,xcvr-hsslew = <32>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + status = "disabled"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/u9540.dts deleted file mode 100644 index 95892ec6c3429529cf8c6254b0f2c0a595289229..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/u9540.dts +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Copyright 2012 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -/include/ "dbx5x0.dtsi" - -/ { - model = "ST-Ericsson U9540 platform with Device Tree"; - compatible = "st-ericsson,u9540"; - - memory { - reg = <0x00000000 0x20000000>; - }; - - soc-u9500 { - uart@80120000 { - status = "okay"; - }; - - uart@80121000 { - status = "okay"; - }; - - uart@80007000 { - status = "okay"; - }; - - // External Micro SD slot - sdi0_per1@80126000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux3_reg>; - - cd-gpios = <&gpio7 6 0x4>; // 230 - cd-inverted; - - status = "okay"; - }; - - - // WLAN SDIO channel - sdi1_per2@80118000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; - bus-width = <4>; - - status = "okay"; - }; - - // On-board eMMC - sdi4_per2@80114000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - mmc-cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux2_reg>; - - status = "okay"; - }; - }; -}; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index d2803be4e1a8f89ac0c9ca6c36429deb43ba65a0..759b0cd2001333ee323da4dc70a330a6a532c72f 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -125,6 +125,12 @@ clock-names = "apb_pclk"; }; + scc@7fff0000 { + compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc"; + reg = <0 0x7fff0000 0 0x1000>; + interrupts = <0 95 4>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 13 0xf08>, diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index b3905f5bcaf9e882cbaea9dfa8247ea69c32fef9..1a58678b93fa613c9de5524026f5777408c7dd05 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -50,6 +50,13 @@ status = "okay"; }; +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_1>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_1>; diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts index 90e913fb64be39c62c34b1e18f975333510a3758..7a563d2523b02805c84e8521984bf451601dffc9 100644 --- a/arch/arm/boot/dts/wm8850-w70v2.dts +++ b/arch/arm/boot/dts/wm8850-w70v2.dts @@ -11,13 +11,14 @@ /dts-v1/; /include/ "wm8850.dtsi" +#include / { model = "Wondermedia WM8850-W70v2 Tablet"; backlight { compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 1>; /* duty inverted */ + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 40 60 80 100 130 190 255>; default-brightness-level = <5>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 6f54a64850eb0fef446fd13390f019d5ab277cdb..e32b92b949d2fe762d52ed40e315421786b16113 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -41,8 +41,8 @@ L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xF8F02000 0x1000>; - arm,data-latency = <2 3 2>; - arm,tag-latency = <2 3 2>; + arm,data-latency = <3 2 2>; + arm,tag-latency = <2 2 2>; cache-unified; cache-level = <2>; }; diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S index 80f033614a1fa07d90de18de6673ce45ec0bf91b..39c96df3477a41549d71e1a18733dd85f4a168df 100644 --- a/arch/arm/common/mcpm_head.S +++ b/arch/arm/common/mcpm_head.S @@ -151,7 +151,7 @@ mcpm_setup_leave: mov r0, #INBOUND_NOT_COMING_UP strb r0, [r8, #MCPM_SYNC_CLUSTER_INBOUND] - dsb + dsb st sev mov r0, r11 diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S index ff198583f683930951e93a4503ed651e76c7d939..8b7df283fedf8e16361f9834349e5f2934fba92e 100644 --- a/arch/arm/common/vlock.S +++ b/arch/arm/common/vlock.S @@ -42,7 +42,7 @@ dmb mov \rscratch, #0 strb \rscratch, [\rbase, \rcpu] - dsb + dsb st sev .endm @@ -102,7 +102,7 @@ ENTRY(vlock_unlock) dmb mov r1, #VLOCK_OWNER_NONE strb r1, [r0, #VLOCK_OWNER_OFFSET] - dsb + dsb st sev bx lr ENDPROC(vlock_unlock) diff --git a/arch/arm/configs/ape6evm_defconfig b/arch/arm/configs/ape6evm_defconfig index dab5a7dfadc64feaf552ce34d24f1d297e14f684..1ce39940795d9ebddb81509e84577b6be88e23ed 100644 --- a/arch/arm/configs/ape6evm_defconfig +++ b/arch/arm/configs/ape6evm_defconfig @@ -54,7 +54,8 @@ CONFIG_NETDEVICES=y CONFIG_SMC91X=y CONFIG_SMSC911X=y # CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set CONFIG_SERIAL_NONSTANDARD=y @@ -71,6 +72,9 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y # CONFIG_IOMMU_SUPPORT is not set # CONFIG_DNOTIFY is not set CONFIG_TMPFS=y diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 65edf6d47215b23fdad0ef259b7b69db709dd565..6e4931097dd4de1896227e26095e25bfa3e2750d 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -42,6 +42,18 @@ CONFIG_VFP=y CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM_RUNTIME=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_PROC_DEVICETREE=y @@ -112,7 +124,6 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110 CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set -CONFIG_DEBUG_LL=y CONFIG_CRC_CCITT=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig index 845f5cdf62b5ccb11e0044cafb75f64c35f2d4ee..e7e94948d19478729aeb60a8167c6a7cf2a8e7a7 100644 --- a/arch/arm/configs/bockw_defconfig +++ b/arch/arm/configs/bockw_defconfig @@ -82,6 +82,13 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HWMON is not set CONFIG_I2C=y CONFIG_I2C_RCAR=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=y +CONFIG_VIDEO_RCAR_VIN=y +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_ML86V7667=y CONFIG_SPI=y CONFIG_SPI_SH_HSPI=y CONFIG_USB=y diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 4364eff5b01ea79f95f9e31d82ec1ef22678eadf..11010547684851b8af0be967296705a8b7bcfb53 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -13,6 +13,9 @@ CONFIG_ARCH_DOVE=y CONFIG_MACH_DOVE_DB=y CONFIG_MACH_CM_A510=y CONFIG_MACH_DOVE_DT=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MVEBU=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -78,6 +81,7 @@ CONFIG_SPI_ORION=y CONFIG_THERMAL=y CONFIG_DOVE_THERMAL=y CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig deleted file mode 100644 index bffe68e190a3d93157886557e1958bde59798648..0000000000000000000000000000000000000000 --- a/arch/arm/configs/exynos4_defconfig +++ /dev/null @@ -1,68 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_EXYNOS=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 -CONFIG_MACH_SMDKC210=y -CONFIG_MACH_ARMLEX4210=y -CONFIG_MACH_UNIVERSAL_C210=y -CONFIG_MACH_NURI=y -CONFIG_MACH_ORIGEN=y -CONFIG_MACH_SMDK4412=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index f07a847b00c91d27504b059beb2090c13b618875..e958ebe7977984be0a2a30746b2acefcfadfecca 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -17,16 +16,18 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_MXC=y CONFIG_ARCH_MULTI_V4T=y CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set +CONFIG_ARCH_MXC=y +CONFIG_MXC_IRQ_PRIOR=y CONFIG_ARCH_MX1ADS=y CONFIG_MACH_SCB9328=y CONFIG_MACH_APF9328=y CONFIG_MACH_MX21ADS=y CONFIG_MACH_MX25_3DS=y CONFIG_MACH_EUKREA_CPUIMX25SD=y +CONFIG_MACH_IMX25_DT=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_CPUIMX27=y @@ -39,8 +40,6 @@ CONFIG_MACH_PCA100=y CONFIG_MACH_MXT_TD60=y CONFIG_MACH_IMX27IPCAM=y CONFIG_MACH_IMX27_DT=y -CONFIG_MXC_IRQ_PRIOR=y -CONFIG_MXC_PWM=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -67,7 +66,6 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -123,24 +121,20 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_DEV=y -CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX2=y CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_CODA=y +CONFIG_SOC_CAMERA_OV2640=y CONFIG_FB=y CONFIG_FB_IMX=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -157,7 +151,6 @@ CONFIG_USB_HID=m CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y -CONFIG_USB_ULPI=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y @@ -198,3 +191,5 @@ CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 06686e7303a95d8e739fea7f635438e0bf91bc6a..5d488c24b13287303bebaa2ddbda22fe9b898f40 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y @@ -17,10 +16,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MXC=y CONFIG_ARCH_MULTI_V6=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_MACH_IMX31_DT=y +CONFIG_ARCH_MXC=y CONFIG_MACH_MX31LILLY=y CONFIG_MACH_MX31LITE=y CONFIG_MACH_PCM037=y @@ -30,6 +27,7 @@ CONFIG_MACH_MX31MOBOARD=y CONFIG_MACH_QONG=y CONFIG_MACH_ARMADILLO5X0=y CONFIG_MACH_KZM_ARM11_01=y +CONFIG_MACH_IMX31_DT=y CONFIG_MACH_PCM043=y CONFIG_MACH_MX35_3DS=y CONFIG_MACH_VPR200=y @@ -39,7 +37,6 @@ CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y CONFIG_SOC_VF610=y -CONFIG_MXC_PWM=y CONFIG_SMP=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y @@ -64,20 +61,24 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_LRO is not set CONFIG_IPV6=y CONFIG_NETFILTER=y -# CONFIG_WIRELESS is not set +CONFIG_CFG80211=y +CONFIG_MAC80211=y +CONFIG_RFKILL=y +CONFIG_RFKILL_INPUT=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set +CONFIG_IMX_WEIM=y CONFIG_CONNECTOR=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_M25P80=y CONFIG_MTD_SST25L=y @@ -88,6 +89,7 @@ CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_SRAM=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y # CONFIG_SCSI_PROC_FS is not set @@ -98,10 +100,11 @@ CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_IMX=y CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CHELSIO is not set CONFIG_CS89x0=y CONFIG_CS89x0_PLATFORM=y # CONFIG_NET_VENDOR_FARADAY is not set @@ -115,7 +118,7 @@ CONFIG_SMC91X=y CONFIG_SMC911X=y CONFIG_SMSC911X=y # CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_WLAN is not set +CONFIG_BRCMFMAC=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVBUG=m @@ -124,6 +127,7 @@ CONFIG_KEYBOARD_IMX=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_EGALAX=y CONFIG_TOUCHSCREEN_MC13783=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MMA8450=y @@ -133,13 +137,13 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_DEVKMEM is not set CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_MXC_RNGA=y -CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y # CONFIG_I2C_HELPER_AUTO is not set -CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m CONFIG_I2C_IMX=y @@ -155,30 +159,26 @@ CONFIG_MFD_MC13XXX_SPI=y CONFIG_MFD_MC13XXX_I2C=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_DA9052=y CONFIG_REGULATOR_ANATOP=y +CONFIG_REGULATOR_DA9052=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_DEV=y -CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y +CONFIG_VIDEO_MX3=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_CODA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_DRM=y -CONFIG_VIDEO_MX3=y -CONFIG_FB=y -CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y +CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -192,11 +192,12 @@ CONFIG_SND_SOC_IMX_MC13783=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y +CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_PHY=y +CONFIG_NOP_USB_XCEIV=y CONFIG_USB_MXS_PHY=y -CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y @@ -213,9 +214,10 @@ CONFIG_IMX_SDMA=y CONFIG_MXS_DMA=y CONFIG_STAGING=y CONFIG_DRM_IMX=y -CONFIG_DRM_IMX_TVE=y CONFIG_DRM_IMX_FB_HELPER=y CONFIG_DRM_IMX_PARALLEL_DISPLAY=y +CONFIG_DRM_IMX_TVE=y +CONFIG_DRM_IMX_LDB=y CONFIG_DRM_IMX_IPUV3_CORE=y CONFIG_DRM_IMX_IPUV3=y CONFIG_COMMON_CLK_DEBUG=y @@ -269,3 +271,6 @@ CONFIG_CRC_CCITT=m CONFIG_CRC_T10DIF=y CONFIG_CRC7=m CONFIG_LIBCRC32C=m +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 62e968cac9dc132f66c7c2d397c689a19aeda295..1f36b823905f1d6e1c16eeb9e0554efc1678bcf0 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -104,6 +104,7 @@ CONFIG_IP_SCTP=y CONFIG_VLAN_8021Q=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CMA=y +CONFIG_DMA_CMA=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 0f2aa61911a33361c5cad2210135a791f80d4259..0ae0eaebf6b22ea7c71ed5746ee448029346af9f 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -10,49 +10,18 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_KIRKWOOD=y CONFIG_MACH_D2NET_V2=y -CONFIG_MACH_DB88F6281_BP=y -CONFIG_MACH_DOCKSTAR=y -CONFIG_MACH_ESATA_SHEEVAPLUG=y -CONFIG_MACH_GURUPLUG=y -CONFIG_MACH_INETSPACE_V2=y -CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_NET2BIG_V2=y CONFIG_MACH_NET5BIG_V2=y -CONFIG_MACH_NETSPACE_MAX_V2=y -CONFIG_MACH_NETSPACE_V2=y CONFIG_MACH_OPENRD_BASE=y CONFIG_MACH_OPENRD_CLIENT=y CONFIG_MACH_OPENRD_ULTIMATE=y CONFIG_MACH_RD88F6192_NAS=y CONFIG_MACH_RD88F6281=y -CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_T5325=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y -CONFIG_MACH_CLOUDBOX_DT=y -CONFIG_MACH_DB88F628X_BP_DT=y -CONFIG_MACH_DLINK_KIRKWOOD_DT=y -CONFIG_MACH_DOCKSTAR_DT=y -CONFIG_MACH_DREAMPLUG_DT=y -CONFIG_MACH_GOFLEXNET_DT=y -CONFIG_MACH_GURUPLUG_DT=y -CONFIG_MACH_IB62X0_DT=y -CONFIG_MACH_ICONNECT_DT=y -CONFIG_MACH_INETSPACE_V2_DT=y -CONFIG_MACH_IOMEGA_IX2_200_DT=y -CONFIG_MACH_KM_KIRKWOOD_DT=y -CONFIG_MACH_LSXL_DT=y -CONFIG_MACH_MPLCEC4_DT=y -CONFIG_MACH_NETSPACE_LITE_V2_DT=y -CONFIG_MACH_NETSPACE_MAX_V2_DT=y -CONFIG_MACH_NETSPACE_MINI_V2_DT=y -CONFIG_MACH_NETSPACE_V2_DT=y -CONFIG_MACH_NSA310_DT=y -CONFIG_MACH_OPENBLOCKS_A6_DT=y -CONFIG_MACH_READYNAS_DT=y -CONFIG_MACH_SHEEVAPLUG_DT=y -CONFIG_MACH_TOPKICK_DT=y -CONFIG_MACH_TS219_DT=y +CONFIG_ARCH_KIRKWOOD_DT=y +CONFIG_MACH_MV88F6281GTW_GE_DT=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PCI_MVEBU=y CONFIG_PREEMPT=y @@ -92,6 +61,7 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ORION=y CONFIG_BLK_DEV_LOOP=y +CONFIG_EEPROM_AT24=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m @@ -100,9 +70,9 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_MII=y CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_MV643XX_ETH=y +CONFIG_R8169=y CONFIG_MARVELL_PHY=y CONFIG_LIBERTAS=y CONFIG_LIBERTAS_SDIO=y @@ -123,9 +93,11 @@ CONFIG_I2C_MV64XXX=y CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set +CONFIG_SENSORS_ADT7475=y +CONFIG_SENSORS_LM63=y +CONFIG_SENSORS_LM75=y +CONFIG_SENSORS_LM85=y CONFIG_THERMAL=y -CONFIG_KIRKWOOD_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_HID_DRAGONRISE=y @@ -164,6 +136,8 @@ CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_RS5C372=y +CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_S35390A=y CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y @@ -171,6 +145,7 @@ CONFIG_MV_XOR=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -186,12 +161,12 @@ CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/lager_defconfig b/arch/arm/configs/lager_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..e777ef22b8016559a71ef6ac4d59dec9eb29918b --- /dev/null +++ b/arch/arm/configs/lager_defconfig @@ -0,0 +1,120 @@ +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_R8A7790=y +CONFIG_MACH_LAGER=y +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +CONFIG_ARM_ERRATA_430973=y +CONFIG_ARM_ERRATA_458693=y +CONFIG_ARM_ERRATA_460075=y +CONFIG_ARM_ERRATA_743622=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_KEXEC=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_NETDEVICES=y +# CONFIG_NET_CORE is not set +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_SH_ETH=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=10 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_GPIO=y +CONFIG_I2C_SH_MOBILE=y +CONFIG_GPIO_SH_PFC=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_RCAR=y +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_RCAR_THERMAL=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_SDHI=y +CONFIG_MMC_SH_MMCIF=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_SH_DMAE=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_ARM_UNWIND is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 494e70aeb9e18ad1472e7af5565b01683aa7a7fb..000e9205b2b93ca0aed76dbcbf60f6eb815524b6 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -29,6 +29,7 @@ CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y @@ -84,6 +85,13 @@ CONFIG_GPIO_RCAR=y CONFIG_THERMAL=y CONFIG_RCAR_THERMAL=y CONFIG_SSB=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=y +CONFIG_VIDEO_RCAR_VIN=y +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_ADV7180=y CONFIG_USB=y CONFIG_USB_RCAR_PHY=y CONFIG_MMC=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 731814e2c189eeae25c80e27464e000aa18d8cd2..594d706b641f8df1de256c875d638795acaa054f 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -39,6 +39,8 @@ CONFIG_MVNETA=y CONFIG_MARVELL_PHY=y CONFIG_MWIFIEX=y CONFIG_MWIFIEX_SDIO=y +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_I2C=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 1d6d8fb7f4a14079c6e54f2e2c6819cbe3b02888..4555c025629a770c6f4b7a8fe2d97208b167fb7f 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -27,7 +26,6 @@ CONFIG_ARCH_MXS=y # CONFIG_ARM_THUMB is not set CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y @@ -43,8 +41,6 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m CONFIG_CAN_FLEXCAN=m # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y @@ -52,7 +48,6 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_M25P80=y @@ -67,12 +62,12 @@ CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_ENC28J60=y -CONFIG_USB_USBNET=y -CONFIG_USB_NET_SMSC95XX=y CONFIG_SMSC_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_REALTEK_PHY=y CONFIG_MICREL_PHY=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC95XX=y # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y @@ -110,7 +105,6 @@ CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -119,9 +113,9 @@ CONFIG_SND_MXS_SOC=y CONFIG_SND_SOC_MXS_SGTL5000=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_STORAGE=y CONFIG_USB_PHY=y CONFIG_USB_MXS_PHY=y CONFIG_MMC=y @@ -143,9 +137,9 @@ CONFIG_DMADEVICES=y CONFIG_MXS_DMA=y CONFIG_STAGING=y CONFIG_MXS_LRADC=y -CONFIG_IIO_SYSFS_TRIGGER=y CONFIG_COMMON_CLK_DEBUG=y CONFIG_IIO=y +CONFIG_IIO_SYSFS_TRIGGER=y CONFIG_PWM=y CONFIG_PWM_MXS=y CONFIG_EXT2_FS=y @@ -173,14 +167,14 @@ CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y CONFIG_FRAME_WARN=2048 -CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_LOCKUP_DETECTOR=y CONFIG_TIMER_STATS=y CONFIG_PROVE_LOCKING=y -CONFIG_DEBUG_INFO=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_STRICT_DEVMEM=y CONFIG_DEBUG_USER=y @@ -188,3 +182,4 @@ CONFIG_DEBUG_USER=y # CONFIG_CRYPTO_HW is not set CONFIG_CRC_ITU_T=m CONFIG_CRC7=m +CONFIG_FONTS=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 5339e6a4d639dccaca9144eb0df3101b692d0df2..254cf0539439b0ab87bb44dcd62e2d24c8120f0c 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -78,6 +78,7 @@ CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CMA=y +CONFIG_DMA_CMA=y CONFIG_CONNECTOR=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -185,13 +186,11 @@ CONFIG_OMAP2_DSS_RFBI=y CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m -CONFIG_PANEL_GENERIC_DPI=m -CONFIG_PANEL_TFP410=m -CONFIG_PANEL_SHARP_LS037V7DW01=m -CONFIG_PANEL_NEC_NL8048HL11_01B=m -CONFIG_PANEL_TAAL=m -CONFIG_PANEL_TPO_TD043MTEA1=m -CONFIG_PANEL_ACX565AKM=m +CONFIG_DISPLAY_ENCODER_TFP410=m +CONFIG_DISPLAY_ENCODER_TPD12S015=m +CONFIG_DISPLAY_CONNECTOR_DVI=m +CONFIG_DISPLAY_CONNECTOR_HDMI=m +CONFIG_DISPLAY_PANEL_DPI=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y @@ -306,3 +305,4 @@ CONFIG_TI_DAVINCI_MDIO=y CONFIG_TI_DAVINCI_CPDMA=y CONFIG_TI_CPSW=y CONFIG_AT803X_PHY=y +CONFIG_SOC_DRA7XX=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 1effb43dab80833f2b0df2a520fc61f7f2db6028..ea042e80e54d7c694a4486f95cbca565713ad181 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -1,3 +1,4 @@ +CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y @@ -26,8 +27,11 @@ CONFIG_ARCH_TEGRA=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_ARCH_TEGRA_114_SOC=y -CONFIG_TEGRA_PCI=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_TEGRA=y +CONFIG_PCIEPORTBUS=y CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y @@ -79,6 +83,7 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_CMA=y +CONFIG_DMA_CMA=y CONFIG_MTD=y CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y @@ -91,6 +96,7 @@ CONFIG_ISL29003=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y +CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y @@ -105,6 +111,7 @@ CONFIG_RT2800USB=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y +CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y # CONFIG_LEGACY_PTYS is not set @@ -177,6 +184,7 @@ CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_ACM=y diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index e406d575c94f500f962888a5240b64d6bfcecfb5..5665134bfa3ef28043fb7a41c9843cfa8669f465 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -17,7 +17,8 @@ int arch_timer_arch_init(void); * nicely work out which register we want, and chuck away the rest of * the code. At least it does so with a recent GCC (4.6.3). */ -static inline void arch_timer_reg_write(const int access, const int reg, u32 val) +static __always_inline +void arch_timer_reg_write_cp15(int access, enum arch_timer_reg reg, u32 val) { if (access == ARCH_TIMER_PHYS_ACCESS) { switch (reg) { @@ -28,9 +29,7 @@ static inline void arch_timer_reg_write(const int access, const int reg, u32 val asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val)); break; } - } - - if (access == ARCH_TIMER_VIRT_ACCESS) { + } else if (access == ARCH_TIMER_VIRT_ACCESS) { switch (reg) { case ARCH_TIMER_REG_CTRL: asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" (val)); @@ -44,7 +43,8 @@ static inline void arch_timer_reg_write(const int access, const int reg, u32 val isb(); } -static inline u32 arch_timer_reg_read(const int access, const int reg) +static __always_inline +u32 arch_timer_reg_read_cp15(int access, enum arch_timer_reg reg) { u32 val = 0; @@ -57,9 +57,7 @@ static inline u32 arch_timer_reg_read(const int access, const int reg) asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val)); break; } - } - - if (access == ARCH_TIMER_VIRT_ACCESS) { + } else if (access == ARCH_TIMER_VIRT_ACCESS) { switch (reg) { case ARCH_TIMER_REG_CTRL: asm volatile("mrc p15, 0, %0, c14, c3, 1" : "=r" (val)); diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index a5fef710af3225b70a35c733335418dcbd3dc830..fcc1b5bf6979cafd4850ff88b3cf8d21bb6791a5 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -220,9 +220,9 @@ #ifdef CONFIG_SMP #if __LINUX_ARM_ARCH__ >= 7 .ifeqs "\mode","arm" - ALT_SMP(dmb) + ALT_SMP(dmb ish) .else - ALT_SMP(W(dmb)) + ALT_SMP(W(dmb) ish) .endif #elif __LINUX_ARM_ARCH__ == 6 ALT_SMP(mcr p15, 0, r0, c7, c10, 5) @ dmb diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h index 8dcd9c702d90c9c352d85595d0ea8f83a42f215e..60f15e274e6d461814eb467cc84dc8b0f0395163 100644 --- a/arch/arm/include/asm/barrier.h +++ b/arch/arm/include/asm/barrier.h @@ -14,27 +14,27 @@ #endif #if __LINUX_ARM_ARCH__ >= 7 -#define isb() __asm__ __volatile__ ("isb" : : : "memory") -#define dsb() __asm__ __volatile__ ("dsb" : : : "memory") -#define dmb() __asm__ __volatile__ ("dmb" : : : "memory") +#define isb(option) __asm__ __volatile__ ("isb " #option : : : "memory") +#define dsb(option) __asm__ __volatile__ ("dsb " #option : : : "memory") +#define dmb(option) __asm__ __volatile__ ("dmb " #option : : : "memory") #elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6 -#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ +#define isb(x) __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ : : "r" (0) : "memory") -#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ +#define dsb(x) __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ : : "r" (0) : "memory") -#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ +#define dmb(x) __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ : : "r" (0) : "memory") #elif defined(CONFIG_CPU_FA526) -#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ +#define isb(x) __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ : : "r" (0) : "memory") -#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ +#define dsb(x) __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ : : "r" (0) : "memory") -#define dmb() __asm__ __volatile__ ("" : : : "memory") +#define dmb(x) __asm__ __volatile__ ("" : : : "memory") #else -#define isb() __asm__ __volatile__ ("" : : : "memory") -#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ +#define isb(x) __asm__ __volatile__ ("" : : : "memory") +#define dsb(x) __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ : : "r" (0) : "memory") -#define dmb() __asm__ __volatile__ ("" : : : "memory") +#define dmb(x) __asm__ __volatile__ ("" : : : "memory") #endif #ifdef CONFIG_ARCH_HAS_BARRIERS @@ -42,7 +42,7 @@ #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) #define mb() do { dsb(); outer_sync(); } while (0) #define rmb() dsb() -#define wmb() mb() +#define wmb() do { dsb(st); outer_sync(); } while (0) #else #define mb() barrier() #define rmb() barrier() @@ -54,9 +54,9 @@ #define smp_rmb() barrier() #define smp_wmb() barrier() #else -#define smp_mb() dmb() -#define smp_rmb() dmb() -#define smp_wmb() dmb() +#define smp_mb() dmb(ish) +#define smp_rmb() smp_mb() +#define smp_wmb() dmb(ishst) #endif #define read_barrier_depends() do { } while(0) diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 17d0ae8672fa666b8d1e43ae40b0226e1bd04ac8..15f2d5bf8875636e1514d377fc61b426534b3f74 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -268,8 +268,7 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr * Harvard caches are synchronised for the user space address range. * This is used for the ARM private sys_cacheflush system call. */ -#define flush_cache_user_range(start,end) \ - __cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end)) +#define flush_cache_user_range(s,e) __cpuc_coherent_user_range(s,e) /* * Perform necessary cache operations to ensure that data previously @@ -352,7 +351,7 @@ static inline void flush_cache_vmap(unsigned long start, unsigned long end) * set_pte_at() called from vmap_pte_range() does not * have a DSB after cleaning the cache line. */ - dsb(); + dsb(ishst); } static inline void flush_cache_vunmap(unsigned long start, unsigned long end) diff --git a/arch/arm/include/asm/dma-contiguous.h b/arch/arm/include/asm/dma-contiguous.h index 3ed37b4d93dade5c688410eae876ccb53364ef72..e072bb2ba1b12761d579b44cf951ba97d28b0386 100644 --- a/arch/arm/include/asm/dma-contiguous.h +++ b/arch/arm/include/asm/dma-contiguous.h @@ -2,7 +2,7 @@ #define ASMARM_DMA_CONTIGUOUS_H #ifdef __KERNEL__ -#ifdef CONFIG_CMA +#ifdef CONFIG_DMA_CMA #include #include diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 56211f2084ef871841215a0c4adfec6f778689d3..f4b46d39b9cfb12756050a992262367ce575f90b 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -19,8 +19,6 @@ typedef elf_greg_t elf_gregset_t[ELF_NGREG]; typedef struct user_fp elf_fpregset_t; -#define EM_ARM 40 - #define EF_ARM_EABI_MASK 0xff000000 #define EF_ARM_EABI_UNKNOWN 0x00000000 #define EF_ARM_EABI_VER1 0x01000000 diff --git a/arch/arm/include/asm/hardware/debug-8250.S b/arch/arm/include/asm/hardware/debug-8250.S deleted file mode 100644 index 22c689255e6e8767499c90b03732ce94d16efcbc..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/hardware/debug-8250.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * arch/arm/include/asm/hardware/debug-8250.S - * - * Copyright (C) 1994-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - - .macro senduart,rd,rx - strb \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - .macro waituart,rd,rx -#ifdef FLOW_CONTROL -1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] - tst \rd, #UART_MSR_CTS - beq 1001b -#endif - .endm diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 472ac7091003ac0cbae073ec1794413d80a04262..9b28c41f4ba916a569bf1f105064f092ab434dda 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -64,7 +64,7 @@ void kvm_clear_hyp_idmap(void); static inline void kvm_set_pte(pte_t *pte, pte_t new_pte) { - pte_val(*pte) = new_pte; + *pte = new_pte; /* * flush_pmd_entry just takes a void pointer and cleans the necessary * cache entries, so we can reuse the function for ptes. diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h deleted file mode 100644 index f77ffc1eb0c2b0d2e5a6125169da694b33bd2a0f..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/localtimer.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/include/asm/localtimer.h - * - * Copyright (C) 2004-2005 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_LOCALTIMER_H -#define __ASM_ARM_LOCALTIMER_H - -#include - -struct clock_event_device; - -struct local_timer_ops { - int (*setup)(struct clock_event_device *); - void (*stop)(struct clock_event_device *); -}; - -#ifdef CONFIG_LOCAL_TIMERS -/* - * Register a local timer driver - */ -int local_timer_register(struct local_timer_ops *); -#else -static inline int local_timer_register(struct local_timer_ops *ops) -{ - return -ENXIO; -} -#endif - -#endif diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 441efc491b50aa0f402bf60fbe6ecd6020456875..69b879ac0289fde3a1ce8776b7d3602078286be7 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -65,12 +65,12 @@ struct machine_desc { /* * Current machine - only accessible during boot. */ -extern struct machine_desc *machine_desc; +extern const struct machine_desc *machine_desc; /* * Machine type table - also only accessible during boot */ -extern struct machine_desc __arch_info_begin[], __arch_info_end[]; +extern const struct machine_desc __arch_info_begin[], __arch_info_end[]; #define for_each_machine_desc(p) \ for (p = __arch_info_begin; p < __arch_info_end; p++) diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index a1c90d7feb0e904cde2c17c527da7158ac0a3585..454d642a407017e879f1e23a54d82ed6bf0faf7b 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -36,6 +36,8 @@ struct hw_pci { resource_size_t start, resource_size_t size, resource_size_t align); + void (*add_bus)(struct pci_bus *bus); + void (*remove_bus)(struct pci_bus *bus); }; /* @@ -63,6 +65,8 @@ struct pci_sys_data { resource_size_t start, resource_size_t size, resource_size_t align); + void (*add_bus)(struct pci_bus *bus); + void (*remove_bus)(struct pci_bus *bus); void *private_data; /* platform controller private data */ }; diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h index 00ca5f92648ea56616afe8bfbd4a25ff8f0b0e27..c2f5102ae6595b19b9e3d6494395d052ec74687d 100644 --- a/arch/arm/include/asm/memblock.h +++ b/arch/arm/include/asm/memblock.h @@ -4,8 +4,7 @@ struct meminfo; struct machine_desc; -extern void arm_memblock_init(struct meminfo *, struct machine_desc *); - +void arm_memblock_init(struct meminfo *, const struct machine_desc *); phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align); #endif diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index 0d3a28dbc8e5db05823e6b83f85ccc5d04b807ac..ed690c49ef93fae344aeaec993c939e336460283 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -12,6 +12,8 @@ enum { ARM_SEC_CORE, ARM_SEC_EXIT, ARM_SEC_DEVEXIT, + ARM_SEC_HOT, + ARM_SEC_UNLIKELY, ARM_SEC_MAX, }; diff --git a/arch/arm/include/asm/neon.h b/arch/arm/include/asm/neon.h new file mode 100644 index 0000000000000000000000000000000000000000..8f730fe700936e7621974a71dfbec7b94ae535ec --- /dev/null +++ b/arch/arm/include/asm/neon.h @@ -0,0 +1,36 @@ +/* + * linux/arch/arm/include/asm/neon.h + * + * Copyright (C) 2013 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#define cpu_has_neon() (!!(elf_hwcap & HWCAP_NEON)) + +#ifdef __ARM_NEON__ + +/* + * If you are affected by the BUILD_BUG below, it probably means that you are + * using NEON code /and/ calling the kernel_neon_begin() function from the same + * compilation unit. To prevent issues that may arise from GCC reordering or + * generating(1) NEON instructions outside of these begin/end functions, the + * only supported way of using NEON code in the kernel is by isolating it in a + * separate compilation unit, and calling it from another unit from inside a + * kernel_neon_begin/kernel_neon_end pair. + * + * (1) Current GCC (4.7) might generate NEON instructions at O3 level if + * -mpfu=neon is set. + */ + +#define kernel_neon_begin() \ + BUILD_BUG_ON_MSG(1, "kernel_neon_begin() called from NEON code") + +#else +void kernel_neon_begin(void); +#endif +void kernel_neon_end(void); diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 04aeb02d2e116f904e1871e416f433b249ec4086..be956dbf6baea3a7481baa11c58233d0741702d1 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -100,7 +100,7 @@ extern pgprot_t pgprot_s2_device; #define PAGE_HYP _MOD_PROT(pgprot_kernel, L_PTE_HYP) #define PAGE_HYP_DEVICE _MOD_PROT(pgprot_hyp_device, L_PTE_HYP) #define PAGE_S2 _MOD_PROT(pgprot_s2, L_PTE_S2_RDONLY) -#define PAGE_S2_DEVICE _MOD_PROT(pgprot_s2_device, L_PTE_USER | L_PTE_S2_RDONLY) +#define PAGE_S2_DEVICE _MOD_PROT(pgprot_s2_device, L_PTE_S2_RDWR) #define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN | L_PTE_NONE) #define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN) diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index a219227c3e43815417887e2425d2c900d856333e..4a2985e21969ab283889935c20ad44a486ed1dcd 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -15,13 +15,13 @@ #ifdef CONFIG_OF -extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); +extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys); extern void arm_dt_memblock_reserve(void); extern void __init arm_dt_init_cpu_maps(void); #else /* CONFIG_OF */ -static inline struct machine_desc *setup_machine_fdt(unsigned int dt_phys) +static inline const struct machine_desc *setup_machine_fdt(unsigned int dt_phys) { return NULL; } diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index b07c09e5a0ac86c6ddd5f7bc9ba25425c784e147..4f2c28060c9aa227c47e73ac6557c45add91128f 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -46,7 +46,7 @@ static inline void dsb_sev(void) { #if __LINUX_ARM_ARCH__ >= 7 __asm__ __volatile__ ( - "dsb\n" + "dsb ishst\n" SEV ); #else diff --git a/arch/arm/include/asm/switch_to.h b/arch/arm/include/asm/switch_to.h index fa09e6b49bf19357f7a3454fe89bc6137b9fb403..c99e259469f7de9185f394dbb3c4453ff2f0f50f 100644 --- a/arch/arm/include/asm/switch_to.h +++ b/arch/arm/include/asm/switch_to.h @@ -3,6 +3,16 @@ #include +/* + * For v7 SMP cores running a preemptible kernel we may be pre-empted + * during a TLB maintenance operation, so execute an inner-shareable dsb + * to ensure that the maintenance completes in case we migrate to another + * CPU. + */ +#if defined(CONFIG_PREEMPT) && defined(CONFIG_SMP) && defined(CONFIG_CPU_V7) +#define finish_arch_switch(prev) dsb(ish) +#endif + /* * switch_to(prev, next) should switch from task `prev' to `next' * `prev' will never be the same as `next'. schedule() itself diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 2b8114fcba09a3c5b9d6aceefbc6e456a8c9050a..df5e13d64f2c02b28963c23b319a7634cf5dacc8 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -43,6 +43,16 @@ struct cpu_context_save { __u32 extra[2]; /* Xscale 'acc' register, etc */ }; +struct arm_restart_block { + union { + /* For user cache flushing */ + struct { + unsigned long start; + unsigned long end; + } cache; + }; +}; + /* * low level task data that entry.S needs immediate access to. * __switch_to() assumes cpu_context follows immediately after cpu_domain. @@ -68,6 +78,7 @@ struct thread_info { unsigned long thumbee_state; /* ThumbEE Handler Base register */ #endif struct restart_block restart_block; + struct arm_restart_block arm_restart_block; }; #define INIT_THREAD_INFO(tsk) \ diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index f467e9b3f8d5d5b35c1d6fce386c718eb1b21e8f..38960264040cd989068b7e897979194bd5d30bc4 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -319,67 +319,110 @@ extern struct cpu_tlb_fns cpu_tlb; #define tlb_op(f, regs, arg) __tlb_op(f, "p15, 0, %0, " regs, arg) #define tlb_l2_op(f, regs, arg) __tlb_op(f, "p15, 1, %0, " regs, arg) -static inline void local_flush_tlb_all(void) +static inline void __local_flush_tlb_all(void) { const int zero = 0; const unsigned int __tlb_flag = __cpu_tlb_flags; - if (tlb_flag(TLB_WB)) - dsb(); - tlb_op(TLB_V4_U_FULL | TLB_V6_U_FULL, "c8, c7, 0", zero); tlb_op(TLB_V4_D_FULL | TLB_V6_D_FULL, "c8, c6, 0", zero); tlb_op(TLB_V4_I_FULL | TLB_V6_I_FULL, "c8, c5, 0", zero); - tlb_op(TLB_V7_UIS_FULL, "c8, c3, 0", zero); +} + +static inline void local_flush_tlb_all(void) +{ + const int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_WB)) + dsb(nshst); + + __local_flush_tlb_all(); + tlb_op(TLB_V7_UIS_FULL, "c8, c7, 0", zero); if (tlb_flag(TLB_BARRIER)) { - dsb(); + dsb(nsh); isb(); } } -static inline void local_flush_tlb_mm(struct mm_struct *mm) +static inline void __flush_tlb_all(void) { const int zero = 0; - const int asid = ASID(mm); const unsigned int __tlb_flag = __cpu_tlb_flags; if (tlb_flag(TLB_WB)) - dsb(); + dsb(ishst); + + __local_flush_tlb_all(); + tlb_op(TLB_V7_UIS_FULL, "c8, c3, 0", zero); + + if (tlb_flag(TLB_BARRIER)) { + dsb(ish); + isb(); + } +} + +static inline void __local_flush_tlb_mm(struct mm_struct *mm) +{ + const int zero = 0; + const int asid = ASID(mm); + const unsigned int __tlb_flag = __cpu_tlb_flags; if (possible_tlb_flags & (TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) { - if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) { + if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) { tlb_op(TLB_V4_U_FULL, "c8, c7, 0", zero); tlb_op(TLB_V4_D_FULL, "c8, c6, 0", zero); tlb_op(TLB_V4_I_FULL, "c8, c5, 0", zero); } - put_cpu(); } tlb_op(TLB_V6_U_ASID, "c8, c7, 2", asid); tlb_op(TLB_V6_D_ASID, "c8, c6, 2", asid); tlb_op(TLB_V6_I_ASID, "c8, c5, 2", asid); +} + +static inline void local_flush_tlb_mm(struct mm_struct *mm) +{ + const int asid = ASID(mm); + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_WB)) + dsb(nshst); + + __local_flush_tlb_mm(mm); + tlb_op(TLB_V7_UIS_ASID, "c8, c7, 2", asid); + + if (tlb_flag(TLB_BARRIER)) + dsb(nsh); +} + +static inline void __flush_tlb_mm(struct mm_struct *mm) +{ + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_WB)) + dsb(ishst); + + __local_flush_tlb_mm(mm); #ifdef CONFIG_ARM_ERRATA_720789 - tlb_op(TLB_V7_UIS_ASID, "c8, c3, 0", zero); + tlb_op(TLB_V7_UIS_ASID, "c8, c3, 0", 0); #else - tlb_op(TLB_V7_UIS_ASID, "c8, c3, 2", asid); + tlb_op(TLB_V7_UIS_ASID, "c8, c3, 2", ASID(mm)); #endif if (tlb_flag(TLB_BARRIER)) - dsb(); + dsb(ish); } static inline void -local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) +__local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) { const int zero = 0; const unsigned int __tlb_flag = __cpu_tlb_flags; uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm); - if (tlb_flag(TLB_WB)) - dsb(); - if (possible_tlb_flags & (TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) && cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", uaddr); @@ -392,6 +435,36 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) tlb_op(TLB_V6_U_PAGE, "c8, c7, 1", uaddr); tlb_op(TLB_V6_D_PAGE, "c8, c6, 1", uaddr); tlb_op(TLB_V6_I_PAGE, "c8, c5, 1", uaddr); +} + +static inline void +local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) +{ + const unsigned int __tlb_flag = __cpu_tlb_flags; + + uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm); + + if (tlb_flag(TLB_WB)) + dsb(nshst); + + __local_flush_tlb_page(vma, uaddr); + tlb_op(TLB_V7_UIS_PAGE, "c8, c7, 1", uaddr); + + if (tlb_flag(TLB_BARRIER)) + dsb(nsh); +} + +static inline void +__flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) +{ + const unsigned int __tlb_flag = __cpu_tlb_flags; + + uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm); + + if (tlb_flag(TLB_WB)) + dsb(ishst); + + __local_flush_tlb_page(vma, uaddr); #ifdef CONFIG_ARM_ERRATA_720789 tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 3", uaddr & PAGE_MASK); #else @@ -399,19 +472,14 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) #endif if (tlb_flag(TLB_BARRIER)) - dsb(); + dsb(ish); } -static inline void local_flush_tlb_kernel_page(unsigned long kaddr) +static inline void __local_flush_tlb_kernel_page(unsigned long kaddr) { const int zero = 0; const unsigned int __tlb_flag = __cpu_tlb_flags; - kaddr &= PAGE_MASK; - - if (tlb_flag(TLB_WB)) - dsb(); - tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", kaddr); tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", kaddr); tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", kaddr); @@ -421,26 +489,75 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) tlb_op(TLB_V6_U_PAGE, "c8, c7, 1", kaddr); tlb_op(TLB_V6_D_PAGE, "c8, c6, 1", kaddr); tlb_op(TLB_V6_I_PAGE, "c8, c5, 1", kaddr); +} + +static inline void local_flush_tlb_kernel_page(unsigned long kaddr) +{ + const unsigned int __tlb_flag = __cpu_tlb_flags; + + kaddr &= PAGE_MASK; + + if (tlb_flag(TLB_WB)) + dsb(nshst); + + __local_flush_tlb_kernel_page(kaddr); + tlb_op(TLB_V7_UIS_PAGE, "c8, c7, 1", kaddr); + + if (tlb_flag(TLB_BARRIER)) { + dsb(nsh); + isb(); + } +} + +static inline void __flush_tlb_kernel_page(unsigned long kaddr) +{ + const unsigned int __tlb_flag = __cpu_tlb_flags; + + kaddr &= PAGE_MASK; + + if (tlb_flag(TLB_WB)) + dsb(ishst); + + __local_flush_tlb_kernel_page(kaddr); tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 1", kaddr); if (tlb_flag(TLB_BARRIER)) { - dsb(); + dsb(ish); isb(); } } +/* + * Branch predictor maintenance is paired with full TLB invalidation, so + * there is no need for any barriers here. + */ +static inline void __local_flush_bp_all(void) +{ + const int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_V6_BP)) + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero)); +} + static inline void local_flush_bp_all(void) { const int zero = 0; const unsigned int __tlb_flag = __cpu_tlb_flags; + __local_flush_bp_all(); if (tlb_flag(TLB_V7_UIS_BP)) - asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero)); - else if (tlb_flag(TLB_V6_BP)) asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero)); +} - if (tlb_flag(TLB_BARRIER)) - isb(); +static inline void __flush_bp_all(void) +{ + const int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + + __local_flush_bp_all(); + if (tlb_flag(TLB_V7_UIS_BP)) + asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero)); } #include @@ -461,7 +578,7 @@ static inline void dummy_flush_tlb_a15_erratum(void) * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0. */ asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0)); - dsb(); + dsb(ish); } #else static inline int erratum_a15_798181(void) @@ -495,7 +612,7 @@ static inline void flush_pmd_entry(void *pmd) tlb_l2_op(TLB_L2CLEAN_FR, "c15, c9, 1 @ L2 flush_pmd", pmd); if (tlb_flag(TLB_WB)) - dsb(); + dsb(ishst); } static inline void clean_pmd_entry(void *pmd) diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h new file mode 100644 index 0000000000000000000000000000000000000000..a53cdb8f068c2f3a16ea4645d4a846fa2acb9ea0 --- /dev/null +++ b/arch/arm/include/asm/types.h @@ -0,0 +1,40 @@ +#ifndef _ASM_TYPES_H +#define _ASM_TYPES_H + +#include + +/* + * The C99 types uintXX_t that are usually defined in 'stdint.h' are not as + * unambiguous on ARM as you would expect. For the types below, there is a + * difference on ARM between GCC built for bare metal ARM, GCC built for glibc + * and the kernel itself, which results in build errors if you try to build with + * -ffreestanding and include 'stdint.h' (such as when you include 'arm_neon.h' + * in order to use NEON intrinsics) + * + * As the typedefs for these types in 'stdint.h' are based on builtin defines + * supplied by GCC, we can tweak these to align with the kernel's idea of those + * types, so 'linux/types.h' and 'stdint.h' can be safely included from the same + * source file (provided that -ffreestanding is used). + * + * int32_t uint32_t uintptr_t + * bare metal GCC long unsigned long unsigned int + * glibc GCC int unsigned int unsigned int + * kernel int unsigned int unsigned long + */ + +#ifdef __INT32_TYPE__ +#undef __INT32_TYPE__ +#define __INT32_TYPE__ int +#endif + +#ifdef __UINT32_TYPE__ +#undef __UINT32_TYPE__ +#define __UINT32_TYPE__ unsigned int +#endif + +#ifdef __UINTPTR_TYPE__ +#undef __UINTPTR_TYPE__ +#define __UINTPTR_TYPE__ unsigned long +#endif + +#endif /* _ASM_TYPES_H */ diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h index fa88d09fa3d9f10a8ca5de8a11dbb812645df2da..615781c61627ed30bfaed0d734cdc05417f69e3e 100644 --- a/arch/arm/include/asm/v7m.h +++ b/arch/arm/include/asm/v7m.h @@ -15,6 +15,10 @@ #define V7M_SCB_VTOR 0x08 +#define V7M_SCB_AIRCR 0x0c +#define V7M_SCB_AIRCR_VECTKEY (0x05fa << 16) +#define V7M_SCB_AIRCR_SYSRESETREQ (1 << 2) + #define V7M_SCB_SCR 0x10 #define V7M_SCB_SCR_SLEEPDEEP (1 << 2) @@ -42,3 +46,11 @@ */ #define EXC_RET_STACK_MASK 0x00000004 #define EXC_RET_THREADMODE_PROCESSSTACK 0xfffffffd + +#ifndef __ASSEMBLY__ + +enum reboot_mode; + +void armv7m_restart(enum reboot_mode mode, const char *cmd); + +#endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/xor.h b/arch/arm/include/asm/xor.h index 7604673dc4278609b4f7ba68985d8b996b49ec47..4ffb26d4cad8d9f5225b83e15b9c20c1d3ef7c00 100644 --- a/arch/arm/include/asm/xor.h +++ b/arch/arm/include/asm/xor.h @@ -7,7 +7,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include #include +#include +#include #define __XOR(a1, a2) a1 ^= a2 @@ -138,4 +141,74 @@ static struct xor_block_template xor_block_arm4regs = { xor_speed(&xor_block_arm4regs); \ xor_speed(&xor_block_8regs); \ xor_speed(&xor_block_32regs); \ + NEON_TEMPLATES; \ } while (0) + +#ifdef CONFIG_KERNEL_MODE_NEON + +extern struct xor_block_template const xor_block_neon_inner; + +static void +xor_neon_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) +{ + if (in_interrupt()) { + xor_arm4regs_2(bytes, p1, p2); + } else { + kernel_neon_begin(); + xor_block_neon_inner.do_2(bytes, p1, p2); + kernel_neon_end(); + } +} + +static void +xor_neon_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3) +{ + if (in_interrupt()) { + xor_arm4regs_3(bytes, p1, p2, p3); + } else { + kernel_neon_begin(); + xor_block_neon_inner.do_3(bytes, p1, p2, p3); + kernel_neon_end(); + } +} + +static void +xor_neon_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4) +{ + if (in_interrupt()) { + xor_arm4regs_4(bytes, p1, p2, p3, p4); + } else { + kernel_neon_begin(); + xor_block_neon_inner.do_4(bytes, p1, p2, p3, p4); + kernel_neon_end(); + } +} + +static void +xor_neon_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4, unsigned long *p5) +{ + if (in_interrupt()) { + xor_arm4regs_5(bytes, p1, p2, p3, p4, p5); + } else { + kernel_neon_begin(); + xor_block_neon_inner.do_5(bytes, p1, p2, p3, p4, p5); + kernel_neon_end(); + } +} + +static struct xor_block_template xor_block_neon = { + .name = "neon", + .do_2 = xor_neon_2, + .do_3 = xor_neon_3, + .do_4 = xor_neon_4, + .do_5 = xor_neon_5 +}; + +#define NEON_TEMPLATES \ + do { if (cpu_has_neon()) xor_speed(&xor_block_neon); } while (0) +#else +#define NEON_TEMPLATES +#endif diff --git a/arch/arm/include/debug/8250.S b/arch/arm/include/debug/8250.S new file mode 100644 index 0000000000000000000000000000000000000000..7a2baf913aa0bd669f58b12d028e6c86cb9dcda4 --- /dev/null +++ b/arch/arm/include/debug/8250.S @@ -0,0 +1,54 @@ +/* + * arch/arm/include/debug/8250.S + * + * Copyright (C) 1994-2013 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + + .macro addruart, rp, rv, tmp + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT + .endm + +#ifdef CONFIG_DEBUG_UART_8250_WORD + .macro store, rd, rx:vararg + str \rd, \rx + .endm + + .macro load, rd, rx:vararg + ldr \rd, \rx + .endm +#else + .macro store, rd, rx:vararg + strb \rd, \rx + .endm + + .macro load, rd, rx:vararg + ldrb \rd, \rx + .endm +#endif + +#define UART_SHIFT CONFIG_DEBUG_UART_8250_SHIFT + + .macro senduart,rd,rx + store \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: load \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + .macro waituart,rd,rx +#ifdef CONFIG_DEBUG_UART_8250_FLOW_CONTROL +1001: load \rd, [\rx, #UART_MSR << UART_SHIFT] + tst \rd, #UART_MSR_CTS + beq 1001b +#endif + .endm diff --git a/arch/arm/include/debug/8250_32.S b/arch/arm/include/debug/8250_32.S deleted file mode 100644 index 8db01eeabbb42e02da6305456eef46cf47f1c887..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/8250_32.S +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit - * accesses to the 8250. - */ - -#include - - .macro senduart,rd,rx - str \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - /* The UART's don't have any flow control IO's wired up. */ - .macro waituart,rd,rx - .endm diff --git a/arch/arm/include/debug/bcm2835.S b/arch/arm/include/debug/bcm2835.S deleted file mode 100644 index aed9199bd84732498f6bc692a3254262ed219b64..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/bcm2835.S +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Debugging macro include header - * - * Copyright (C) 2010 Broadcom - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#define BCM2835_DEBUG_PHYS 0x20201000 -#define BCM2835_DEBUG_VIRT 0xf0201000 - - .macro addruart, rp, rv, tmp - ldr \rp, =BCM2835_DEBUG_PHYS - ldr \rv, =BCM2835_DEBUG_VIRT - .endm - -#include diff --git a/arch/arm/include/debug/cns3xxx.S b/arch/arm/include/debug/cns3xxx.S deleted file mode 100644 index d04c150baa1c4001e89baae7d46e4f7963aa1c66..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/cns3xxx.S +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Debugging macro include header - * - * Copyright 1994-1999 Russell King - * Copyright 2008 Cavium Networks - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - - .macro addruart,rp,rv,tmp - mov \rp, #0x00009000 - orr \rv, \rp, #0xf0000000 @ virtual base - orr \rp, \rp, #0x10000000 - .endm - -#include diff --git a/arch/arm/include/debug/highbank.S b/arch/arm/include/debug/highbank.S deleted file mode 100644 index 8cad4322a5a23d660a9465efafc31911d033b9f6..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/highbank.S +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - .macro addruart,rp,rv,tmp - ldr \rv, =0xfee36000 - ldr \rp, =0xfff36000 - .endm - -#include diff --git a/arch/arm/include/debug/keystone.S b/arch/arm/include/debug/keystone.S deleted file mode 100644 index 9aef9ba3f4f0c312d6d40fd2129a3b328d23e292..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/keystone.S +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Early serial debug output macro for Keystone SOCs - * - * Copyright 2013 Texas Instruments, Inc. - * Santosh Shilimkar - * - * Based on RMKs low level debug code. - * Copyright (C) 1994-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include - -#define UART_SHIFT 2 -#if defined(CONFIG_DEBUG_KEYSTONE_UART0) -#define UART_PHYS 0x02530c00 -#define UART_VIRT 0xfeb30c00 -#elif defined(CONFIG_DEBUG_KEYSTONE_UART1) -#define UART_PHYS 0x02531000 -#define UART_VIRT 0xfeb31000 -#endif - - .macro addruart, rp, rv, tmp - ldr \rv, =UART_VIRT @ physical base address - ldr \rp, =UART_PHYS @ virtual base address - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - .macro waituart,rd,rx - .endm diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/include/debug/msm.S similarity index 61% rename from arch/arm/mach-msm/include/mach/debug-macro.S rename to arch/arm/include/debug/msm.S index 0e05f88abcd59a1b4f16a01d400c617843fe9089..9166e1bc470e0153107f059ddd5fbec2570fb5a6 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/include/debug/msm.S @@ -15,8 +15,36 @@ * */ -#include -#include +#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_QSD8X50) +#define MSM_UART1_PHYS 0xA9A00000 +#define MSM_UART2_PHYS 0xA9B00000 +#define MSM_UART3_PHYS 0xA9C00000 +#elif defined(CONFIG_ARCH_MSM7X30) +#define MSM_UART1_PHYS 0xACA00000 +#define MSM_UART2_PHYS 0xACB00000 +#define MSM_UART3_PHYS 0xACC00000 +#endif + +#if defined(CONFIG_DEBUG_MSM_UART1) +#define MSM_DEBUG_UART_BASE 0xE1000000 +#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS +#elif defined(CONFIG_DEBUG_MSM_UART2) +#define MSM_DEBUG_UART_BASE 0xE1000000 +#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS +#elif defined(CONFIG_DEBUG_MSM_UART3) +#define MSM_DEBUG_UART_BASE 0xE1000000 +#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS +#endif + +#ifdef CONFIG_DEBUG_MSM8660_UART +#define MSM_DEBUG_UART_BASE 0xF0040000 +#define MSM_DEBUG_UART_PHYS 0x19C40000 +#endif + +#ifdef CONFIG_DEBUG_MSM8960_UART +#define MSM_DEBUG_UART_BASE 0xF0040000 +#define MSM_DEBUG_UART_PHYS 0x16440000 +#endif .macro addruart, rp, rv, tmp #ifdef MSM_DEBUG_UART_PHYS diff --git a/arch/arm/include/debug/mvebu.S b/arch/arm/include/debug/mvebu.S deleted file mode 100644 index 6517311a1c915bfbb92c7e0b293e2adffa15b973..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/mvebu.S +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Early serial output macro for Marvell SoC - * - * Copyright (C) 2012 Marvell - * - * Lior Amsalem - * Gregory Clement - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_DEBUG_MVEBU_UART_ALTERNATE -#define ARMADA_370_XP_REGS_PHYS_BASE 0xf1000000 -#else -#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000 -#endif - -#define ARMADA_370_XP_REGS_VIRT_BASE 0xfec00000 - - .macro addruart, rp, rv, tmp - ldr \rp, =ARMADA_370_XP_REGS_PHYS_BASE - ldr \rv, =ARMADA_370_XP_REGS_VIRT_BASE - orr \rp, \rp, #0x00012000 - orr \rv, \rv, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/arch/arm/include/debug/mxs.S b/arch/arm/include/debug/mxs.S deleted file mode 100644 index d86951551ca1b8afe31d82981b156e9b6579aed5..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/mxs.S +++ /dev/null @@ -1,27 +0,0 @@ -/* arch/arm/mach-mxs/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifdef CONFIG_DEBUG_IMX23_UART -#define UART_PADDR 0x80070000 -#elif defined (CONFIG_DEBUG_IMX28_UART) -#define UART_PADDR 0x80074000 -#endif - -#define UART_VADDR 0xfe100000 - - .macro addruart, rp, rv, tmp - ldr \rp, =UART_PADDR @ physical - ldr \rv, =UART_VADDR @ virtual - .endm - -#include diff --git a/arch/arm/include/debug/nomadik.S b/arch/arm/include/debug/nomadik.S deleted file mode 100644 index 735417922ce2267767fdbebd1f8af87fe1662363..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/nomadik.S +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart, rp, rv, tmp - mov \rp, #0x00100000 - add \rp, \rp, #0x000fb000 - add \rv, \rp, #0xf0000000 @ virtual base - add \rp, \rp, #0x10000000 @ physical base address - .endm - -#include diff --git a/arch/arm/include/debug/nspire.S b/arch/arm/include/debug/nspire.S deleted file mode 100644 index 886fd276fcbcf719a32bae4224da52d8d41bb210..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/nspire.S +++ /dev/null @@ -1,28 +0,0 @@ -/* - * linux/arch/arm/include/debug/nspire.S - * - * Copyright (C) 2013 Daniel Tang - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * - */ - -#define NSPIRE_EARLY_UART_PHYS_BASE 0x90020000 -#define NSPIRE_EARLY_UART_VIRT_BASE 0xfee20000 - -.macro addruart, rp, rv, tmp - ldr \rp, =(NSPIRE_EARLY_UART_PHYS_BASE) @ physical base address - ldr \rv, =(NSPIRE_EARLY_UART_VIRT_BASE) @ virtual base address -.endm - - -#ifdef CONFIG_DEBUG_NSPIRE_CX_UART -#include -#endif - -#ifdef CONFIG_DEBUG_NSPIRE_CLASSIC_UART -#define UART_SHIFT 2 -#include -#endif diff --git a/arch/arm/include/debug/picoxcell.S b/arch/arm/include/debug/picoxcell.S deleted file mode 100644 index bc1f07c49cd4a5628a9e7c2957597589b2d42f2a..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/picoxcell.S +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#define UART_SHIFT 2 -#define PICOXCELL_UART1_BASE 0x80230000 -#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000) - - .macro addruart, rp, rv, tmp - ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE) - ldr \rp, =PICOXCELL_UART1_BASE - .endm - -#include "8250_32.S" diff --git a/arch/arm/include/asm/hardware/debug-pl01x.S b/arch/arm/include/debug/pl01x.S similarity index 78% rename from arch/arm/include/asm/hardware/debug-pl01x.S rename to arch/arm/include/debug/pl01x.S index f9fd083eff630dd29b0710d603c11447919b9d54..37c6895b87e6d72ce5837e57a4bae0a367339cb2 100644 --- a/arch/arm/include/asm/hardware/debug-pl01x.S +++ b/arch/arm/include/debug/pl01x.S @@ -1,4 +1,4 @@ -/* arch/arm/include/asm/hardware/debug-pl01x.S +/* arch/arm/include/debug/pl01x.S * * Debugging macro include header * @@ -12,6 +12,13 @@ */ #include +#ifdef CONFIG_DEBUG_UART_PHYS + .macro addruart, rp, rv, tmp + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT + .endm +#endif + .macro senduart,rd,rx strb \rd, [\rx, #UART01x_DR] .endm diff --git a/arch/arm/include/debug/pxa.S b/arch/arm/include/debug/pxa.S deleted file mode 100644 index e1e795aa3d7f8e530c2ff6ab5977f65c777ee8d0..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/pxa.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Early serial output macro for Marvell PXA/MMP SoC - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * Copyright (C) 2013 Haojian Zhuang - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#if defined(CONFIG_DEBUG_PXA_UART1) -#define PXA_UART_REG_PHYS_BASE 0x40100000 -#define PXA_UART_REG_VIRT_BASE 0xf2100000 -#elif defined(CONFIG_DEBUG_MMP_UART2) -#define PXA_UART_REG_PHYS_BASE 0xd4017000 -#define PXA_UART_REG_VIRT_BASE 0xfe017000 -#elif defined(CONFIG_DEBUG_MMP_UART3) -#define PXA_UART_REG_PHYS_BASE 0xd4018000 -#define PXA_UART_REG_VIRT_BASE 0xfe018000 -#else -#error "Select uart for DEBUG_LL" -#endif - - .macro addruart, rp, rv, tmp - ldr \rp, =PXA_UART_REG_PHYS_BASE - ldr \rv, =PXA_UART_REG_VIRT_BASE - .endm - -#define UART_SHIFT 2 -#include diff --git a/arch/arm/include/debug/rockchip.S b/arch/arm/include/debug/rockchip.S deleted file mode 100644 index cfd883e6958879e10f6993051c354dab37af83c8..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/rockchip.S +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Early serial output macro for Rockchip SoCs - * - * Copyright (C) 2012 Maxime Ripard - * - * Maxime Ripard - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#if defined(CONFIG_DEBUG_RK29_UART0) -#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20060000 -#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed60000 -#elif defined(CONFIG_DEBUG_RK29_UART1) -#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20064000 -#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed64000 -#elif defined(CONFIG_DEBUG_RK29_UART2) -#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20068000 -#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed68000 -#elif defined(CONFIG_DEBUG_RK3X_UART0) -#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x10124000 -#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfeb24000 -#elif defined(CONFIG_DEBUG_RK3X_UART1) -#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x10126000 -#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfeb26000 -#elif defined(CONFIG_DEBUG_RK3X_UART2) -#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20064000 -#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed64000 -#elif defined(CONFIG_DEBUG_RK3X_UART3) -#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20068000 -#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed68000 -#endif - - .macro addruart, rp, rv, tmp - ldr \rp, =ROCKCHIP_UART_DEBUG_PHYS_BASE - ldr \rv, =ROCKCHIP_UART_DEBUG_VIRT_BASE - .endm - -#define UART_SHIFT 2 -#include diff --git a/arch/arm/include/debug/socfpga.S b/arch/arm/include/debug/socfpga.S deleted file mode 100644 index 966b2f994946daf901631bfa690f86535eb70f1b..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/socfpga.S +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define UART_SHIFT 2 -#define DEBUG_LL_UART_OFFSET 0x00002000 - - .macro addruart, rp, rv, tmp - mov \rp, #DEBUG_LL_UART_OFFSET - orr \rp, \rp, #0x00c00000 - orr \rv, \rp, #0xfe000000 @ virtual base - orr \rp, \rp, #0xff000000 @ physical base - .endm - -#include "8250_32.S" - diff --git a/arch/arm/include/debug/sunxi.S b/arch/arm/include/debug/sunxi.S deleted file mode 100644 index 04eb56d5db2c99411eb85eaf9438fbfd6724c502..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/sunxi.S +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Early serial output macro for Allwinner A1X SoCs - * - * Copyright (C) 2012 Maxime Ripard - * - * Maxime Ripard - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#if defined(CONFIG_DEBUG_SUNXI_UART0) -#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28000 -#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28000 -#elif defined(CONFIG_DEBUG_SUNXI_UART1) -#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28400 -#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28400 -#endif - - .macro addruart, rp, rv, tmp - ldr \rp, =SUNXI_UART_DEBUG_PHYS_BASE - ldr \rv, =SUNXI_UART_DEBUG_VIRT_BASE - .endm - -#define UART_SHIFT 2 -#include diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S index 883d7c22fd9d34e94187d6d5c411f3d01a97d8d0..be6a720dd1834a8f697fc9db98170c15a39f484f 100644 --- a/arch/arm/include/debug/tegra.S +++ b/arch/arm/include/debug/tegra.S @@ -221,3 +221,32 @@ 1002: #endif .endm + +/* + * Storage for the state maintained by the macros above. + * + * In the kernel proper, this data is located in arch/arm/mach-tegra/common.c. + * That's because this header is included from multiple files, and we only + * want a single copy of the data. In particular, the UART probing code above + * assumes it's running using physical addresses. This is true when this file + * is included from head.o, but not when included from debug.o. So we need + * to share the probe results between the two copies, rather than having + * to re-run the probing again later. + * + * In the decompressor, we put the symbol/storage right here, since common.c + * isn't included in the decompressor build. This symbol gets put in .text + * even though it's really data, since .data is discarded from the + * decompressor. Luckily, .text is writeable in the decompressor, unless + * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug. + */ +#if defined(ZIMAGE) +tegra_uart_config: + /* Debug UART initialization required */ + .word 1 + /* Debug UART physical address */ + .word 0 + /* Debug UART virtual address */ + .word 0 + /* Scratch space for debug macro */ + .word 0 +#endif diff --git a/arch/arm/include/debug/u300.S b/arch/arm/include/debug/u300.S deleted file mode 100644 index 6f04f08a203c252e8394b337d16d3f413484e76a..0000000000000000000000000000000000000000 --- a/arch/arm/include/debug/u300.S +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2006-2013 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Debugging macro include header. - * Author: Linus Walleij - */ -#define U300_SLOW_PER_PHYS_BASE 0xc0010000 -#define U300_SLOW_PER_VIRT_BASE 0xff000000 - - .macro addruart, rp, rv, tmp - /* If we move the address using MMU, use this. */ - ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address - ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address - orr \rp, \rp, #0x00003000 - orr \rv, \rv, #0x00003000 - .endm - -#include diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S index fbd24beeb1fad70886ea044387c873a65ef455e2..aa7f63a8b5e03a2ed550044e459f51e34fc611cc 100644 --- a/arch/arm/include/debug/ux500.S +++ b/arch/arm/include/debug/ux500.S @@ -45,4 +45,4 @@ ldr \rv, =UART_VIRT_BASE @ yes, virtual address .endm -#include +#include diff --git a/arch/arm/include/debug/vexpress.S b/arch/arm/include/debug/vexpress.S index acafb229e2b691d4a4a467a3f0a17aba37c21a5d..524acd5a223e618940f0e04785a70b5bf64084e8 100644 --- a/arch/arm/include/debug/vexpress.S +++ b/arch/arm/include/debug/vexpress.S @@ -47,51 +47,5 @@ .endm -#include - -#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9) - - .macro addruart,rp,rv,tmp - mov \rp, #DEBUG_LL_UART_OFFSET - orr \rv, \rp, #DEBUG_LL_VIRT_BASE - orr \rp, \rp, #DEBUG_LL_PHYS_BASE - .endm - -#include - -#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1) - - .macro addruart,rp,rv,tmp - mov \rp, #DEBUG_LL_UART_OFFSET_RS1 - orr \rv, \rp, #DEBUG_LL_VIRT_BASE - orr \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1 - .endm - -#include - -#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CRX) - - .macro addruart,rp,tmp,tmp2 - ldr \rp, =DEBUG_LL_UART_PHYS_CRX - .endm - -#include - -#else /* CONFIG_DEBUG_LL_UART_NONE */ - - .macro addruart, rp, rv, tmp - /* Safe dummy values */ - mov \rp, #0 - mov \rv, #DEBUG_LL_VIRT_BASE - .endm - - .macro senduart,rd,rx - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx - .endm - +#include #endif diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 86d10dd47dc46b52328436fbfee0baf88cbc87fc..5140df5f23aa485214914a8dfbfdf31dc04a5691 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_ATAGS_PROC) += atags_proc.o obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o ifeq ($(CONFIG_CPU_V7M),y) -obj-y += entry-v7m.o +obj-y += entry-v7m.o v7m.o else obj-y += entry-armv.o endif diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h index 9edc9692332d1a368a293f38e0a9543c2102a751..ec4164da6e3018737c42022bef16b3ed6bcea350 100644 --- a/arch/arm/kernel/atags.h +++ b/arch/arm/kernel/atags.h @@ -7,9 +7,10 @@ static inline void save_atags(struct tag *tags) { } void convert_to_tag_list(struct tag *tags); #ifdef CONFIG_ATAGS -struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr); +const struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer, + unsigned int machine_nr); #else -static inline struct machine_desc * +static inline const struct machine_desc * setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) { early_print("no ATAGS support: can't continue\n"); diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c index 14512e6931d87957b718445dd25b31283315a222..8c14de8180c0af46fea1531261a7a276177a91a8 100644 --- a/arch/arm/kernel/atags_parse.c +++ b/arch/arm/kernel/atags_parse.c @@ -178,11 +178,11 @@ static void __init squash_mem_tags(struct tag *tag) tag->hdr.tag = ATAG_NONE; } -struct machine_desc * __init setup_machine_tags(phys_addr_t __atags_pointer, - unsigned int machine_nr) +const struct machine_desc * __init +setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) { struct tag *tags = (struct tag *)&default_tags; - struct machine_desc *mdesc = NULL, *p; + const struct machine_desc *mdesc = NULL, *p; char *from = default_command_line; default_tags.mem.start = PHYS_OFFSET; diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 261fcc8261698391937343d0f24ae4b72a93c0e7..317da88ae65b14f2bdd9145a3b552316f134c18a 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -363,6 +363,20 @@ void pcibios_fixup_bus(struct pci_bus *bus) } EXPORT_SYMBOL(pcibios_fixup_bus); +void pcibios_add_bus(struct pci_bus *bus) +{ + struct pci_sys_data *sys = bus->sysdata; + if (sys->add_bus) + sys->add_bus(bus); +} + +void pcibios_remove_bus(struct pci_bus *bus) +{ + struct pci_sys_data *sys = bus->sysdata; + if (sys->remove_bus) + sys->remove_bus(bus); +} + /* * Swizzle the device pin each time we cross a bridge. If a platform does * not provide a swizzle function, we perform the standard PCI swizzling. @@ -464,6 +478,8 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw, sys->swizzle = hw->swizzle; sys->map_irq = hw->map_irq; sys->align_resource = hw->align_resource; + sys->add_bus = hw->add_bus; + sys->remove_bus = hw->remove_bus; INIT_LIST_HEAD(&sys->resources); if (hw->private_data) @@ -525,11 +541,6 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw) * Assign resources. */ pci_bus_assign_resources(bus); - - /* - * Enable bridges - */ - pci_enable_bridges(bus); } /* diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 5859c8bc727c4254bc7e8fa254a4271d6b214242..f35906b3d8c9eb5b7ebcb915c1d6ec77585aef3e 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -169,6 +169,11 @@ void __init arm_dt_init_cpu_maps(void) } } +bool arch_match_cpu_phys_id(int cpu, u64 phys_id) +{ + return (phys_id & MPIDR_HWID_BITMASK) == cpu_logical_map(cpu); +} + /** * setup_machine_fdt - Machine setup when an dtb was passed to the kernel * @dt_phys: physical address of dt blob @@ -176,10 +181,10 @@ void __init arm_dt_init_cpu_maps(void) * If a dtb was passed to the kernel in r2, then use it to choose the * correct machine_desc and to setup the system. */ -struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) +const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) { struct boot_param_header *devtree; - struct machine_desc *mdesc, *mdesc_best = NULL; + const struct machine_desc *mdesc, *mdesc_best = NULL; unsigned int score, mdesc_score = ~1; unsigned long dt_root; const char *model; @@ -188,7 +193,7 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) DT_MACHINE_START(GENERIC_DT, "Generic DT based system") MACHINE_END - mdesc_best = (struct machine_desc *)&__mach_desc_GENERIC_DT; + mdesc_best = &__mach_desc_GENERIC_DT; #endif if (!dt_phys) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 94104bf69719f896e51836ca8a048077086fbb0a..74ad15d1a065fba97aac1d4ac43ff33a9e994470 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -442,10 +442,10 @@ local_restart: ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine add r1, sp, #S_OFF -2: mov why, #0 @ no longer a real syscall cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE) eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back - bcs arm_syscall + bcs arm_syscall +2: mov why, #0 @ no longer a real syscall b sys_ni_syscall @ not private func #if defined(CONFIG_OABI_COMPAT) || !defined(CONFIG_AEABI) diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index fc7920288a3d90a3f9c3ca38be03ff845f84515a..918875d96d5dc598985c7dce050e0a1785637b49 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -89,7 +89,8 @@ void set_fiq_handler(void *start, unsigned int length) memcpy(base + offset, start, length); if (!cache_is_vipt_nonaliasing()) - flush_icache_range(base + offset, offset + length); + flush_icache_range((unsigned long)base + offset, offset + + length); flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length); } diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index d7c82df692436df0248fa1a00502cf74b7fca23c..57221e349a7ce0eec03445cd56de2845e5d23358 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -82,6 +82,7 @@ void machine_crash_nonpanic_core(void *unused) crash_save_cpu(®s, smp_processor_id()); flush_cache_all(); + set_cpu_online(smp_processor_id(), false); atomic_dec(&waiting_for_crash_ipi); while (1) cpu_relax(); diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 85c3fb6c93c2e234769b17e559655d100ad923ab..084dc8896986f321247fc590b9f348cb47872eff 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -292,12 +292,20 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, maps[ARM_SEC_CORE].unw_sec = s; else if (strcmp(".ARM.exidx.exit.text", secname) == 0) maps[ARM_SEC_EXIT].unw_sec = s; + else if (strcmp(".ARM.exidx.text.unlikely", secname) == 0) + maps[ARM_SEC_UNLIKELY].unw_sec = s; + else if (strcmp(".ARM.exidx.text.hot", secname) == 0) + maps[ARM_SEC_HOT].unw_sec = s; else if (strcmp(".init.text", secname) == 0) maps[ARM_SEC_INIT].txt_sec = s; else if (strcmp(".text", secname) == 0) maps[ARM_SEC_CORE].txt_sec = s; else if (strcmp(".exit.text", secname) == 0) maps[ARM_SEC_EXIT].txt_sec = s; + else if (strcmp(".text.unlikely", secname) == 0) + maps[ARM_SEC_UNLIKELY].txt_sec = s; + else if (strcmp(".text.hot", secname) == 0) + maps[ARM_SEC_HOT].txt_sec = s; } for (i = 0; i < ARM_SEC_MAX; i++) diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index aebe0e99c153eaa6889efc7b36459ebdfaeb65cc..8d6147b2001f82eca02c738265f9477dc2dbaefa 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -118,7 +118,8 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler) continue; } - err = request_irq(irq, handler, IRQF_NOBALANCING, "arm-pmu", + err = request_irq(irq, handler, + IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu", cpu_pmu); if (err) { pr_err("unable to request IRQ%d for ARM PMU counters\n", diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index afc2489ee13bc098523f92549baa4a69728c1ced..0e1e2b3afa45864b5776c177ceb5001402e31681 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -72,10 +72,10 @@ static int __init fpe_setup(char *line) __setup("fpe=", fpe_setup); #endif -extern void paging_init(struct machine_desc *desc); +extern void paging_init(const struct machine_desc *desc); extern void sanity_check_meminfo(void); extern enum reboot_mode reboot_mode; -extern void setup_dma_zone(struct machine_desc *desc); +extern void setup_dma_zone(const struct machine_desc *desc); unsigned int processor_id; EXPORT_SYMBOL(processor_id); @@ -139,7 +139,7 @@ EXPORT_SYMBOL(elf_platform); static const char *cpu_name; static const char *machine_name; static char __initdata cmd_line[COMMAND_LINE_SIZE]; -struct machine_desc *machine_desc __initdata; +const struct machine_desc *machine_desc __initdata; static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } }; #define ENDIANNESS ((char)endian_test.l) @@ -607,7 +607,7 @@ static void __init setup_processor(void) void __init dump_machine_table(void) { - struct machine_desc *p; + const struct machine_desc *p; early_print("Available machine support:\n\nID (hex)\tNAME\n"); for_each_machine_desc(p) @@ -694,7 +694,7 @@ static int __init early_mem(char *p) } early_param("mem", early_mem); -static void __init request_standard_resources(struct machine_desc *mdesc) +static void __init request_standard_resources(const struct machine_desc *mdesc) { struct memblock_region *region; struct resource *res; @@ -852,7 +852,7 @@ void __init hyp_mode_check(void) void __init setup_arch(char **cmdline_p) { - struct machine_desc *mdesc; + const struct machine_desc *mdesc; setup_processor(); mdesc = setup_machine_fdt(__atags_pointer); @@ -994,15 +994,6 @@ static int c_show(struct seq_file *m, void *v) seq_printf(m, "model name\t: %s rev %d (%s)\n", cpu_name, cpuid & 15, elf_platform); -#if defined(CONFIG_SMP) - seq_printf(m, "BogoMIPS\t: %lu.%02lu\n", - per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ), - (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100); -#else - seq_printf(m, "BogoMIPS\t: %lu.%02lu\n", - loops_per_jiffy / (500000/HZ), - (loops_per_jiffy / (5000/HZ)) % 100); -#endif /* dump out the processor features */ seq_puts(m, "Features\t: "); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 2dc19349eb19fc23feafa1a2b93db17eb5e6394a..72024ea8a3a6c07038103e153527cb2454e4552f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include #include @@ -156,8 +155,6 @@ int platform_can_cpu_hotplug(void) } #ifdef CONFIG_HOTPLUG_CPU -static void percpu_timer_stop(void); - static int platform_cpu_kill(unsigned int cpu) { if (smp_ops.cpu_kill) @@ -200,11 +197,6 @@ int __cpu_disable(void) */ migrate_irqs(); - /* - * Stop the local timer for this CPU. - */ - percpu_timer_stop(); - /* * Flush user cache and TLB mappings, and then remove this CPU * from the vm mask set of all processes. @@ -326,8 +318,6 @@ static void smp_store_cpu_info(unsigned int cpuid) store_cpu_topology(cpuid); } -static void percpu_timer_setup(void); - /* * This is the secondary CPU boot entry. We're using this CPUs * idle thread stack, but a set of temporary page tables. @@ -382,11 +372,6 @@ asmlinkage void secondary_start_kernel(void) set_cpu_online(cpu, true); complete(&cpu_running); - /* - * Setup the percpu timer for this CPU. - */ - percpu_timer_setup(); - local_irq_enable(); local_fiq_enable(); @@ -398,17 +383,8 @@ asmlinkage void secondary_start_kernel(void) void __init smp_cpus_done(unsigned int max_cpus) { - int cpu; - unsigned long bogosum = 0; - - for_each_online_cpu(cpu) - bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy; - - printk(KERN_INFO "SMP: Total of %d processors activated " - "(%lu.%02lu BogoMIPS).\n", - num_online_cpus(), - bogosum / (500000/HZ), - (bogosum / (5000/HZ)) % 100); + printk(KERN_INFO "SMP: Total of %d processors activated.\n", + num_online_cpus()); hyp_mode_check(); } @@ -432,12 +408,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) if (max_cpus > ncores) max_cpus = ncores; if (ncores > 1 && max_cpus) { - /* - * Enable the local timer or broadcast device for the - * boot CPU, but only if we have more than one CPU. - */ - percpu_timer_setup(); - /* * Initialise the present map, which describes the set of CPUs * actually populated at the present time. A platform should @@ -514,11 +484,6 @@ u64 smp_irq_stat_cpu(unsigned int cpu) return sum; } -/* - * Timer (local or broadcast) support - */ -static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent); - #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST void tick_broadcast(const struct cpumask *mask) { @@ -526,67 +491,6 @@ void tick_broadcast(const struct cpumask *mask) } #endif -static void broadcast_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ -} - -static void broadcast_timer_setup(struct clock_event_device *evt) -{ - evt->name = "dummy_timer"; - evt->features = CLOCK_EVT_FEAT_ONESHOT | - CLOCK_EVT_FEAT_PERIODIC | - CLOCK_EVT_FEAT_DUMMY; - evt->rating = 100; - evt->mult = 1; - evt->set_mode = broadcast_timer_set_mode; - - clockevents_register_device(evt); -} - -static struct local_timer_ops *lt_ops; - -#ifdef CONFIG_LOCAL_TIMERS -int local_timer_register(struct local_timer_ops *ops) -{ - if (!is_smp() || !setup_max_cpus) - return -ENXIO; - - if (lt_ops) - return -EBUSY; - - lt_ops = ops; - return 0; -} -#endif - -static void percpu_timer_setup(void) -{ - unsigned int cpu = smp_processor_id(); - struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); - - evt->cpumask = cpumask_of(cpu); - - if (!lt_ops || lt_ops->setup(evt)) - broadcast_timer_setup(evt); -} - -#ifdef CONFIG_HOTPLUG_CPU -/* - * The generic clock events code purposely does not stop the local timer - * on CPU_DEAD/CPU_DEAD_FROZEN hotplug events, so we have to do it - * manually here. - */ -static void percpu_timer_stop(void) -{ - unsigned int cpu = smp_processor_id(); - struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); - - if (lt_ops) - lt_ops->stop(evt); -} -#endif - static DEFINE_RAW_SPINLOCK(stop_lock); /* diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index c2edfff573c2c9e2e68193cf729a98f460ac1a2d..83ccca303df83c4a1f40dce35f324153d979ad16 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -104,7 +104,7 @@ void flush_tlb_all(void) if (tlb_ops_need_broadcast()) on_each_cpu(ipi_flush_tlb_all, NULL, 1); else - local_flush_tlb_all(); + __flush_tlb_all(); broadcast_tlb_a15_erratum(); } @@ -113,7 +113,7 @@ void flush_tlb_mm(struct mm_struct *mm) if (tlb_ops_need_broadcast()) on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1); else - local_flush_tlb_mm(mm); + __flush_tlb_mm(mm); broadcast_tlb_mm_a15_erratum(mm); } @@ -126,7 +126,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_page, &ta, 1); } else - local_flush_tlb_page(vma, uaddr); + __flush_tlb_page(vma, uaddr); broadcast_tlb_mm_a15_erratum(vma->vm_mm); } @@ -137,7 +137,7 @@ void flush_tlb_kernel_page(unsigned long kaddr) ta.ta_start = kaddr; on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1); } else - local_flush_tlb_kernel_page(kaddr); + __flush_tlb_kernel_page(kaddr); broadcast_tlb_a15_erratum(); } @@ -173,5 +173,5 @@ void flush_bp_all(void) if (tlb_ops_need_broadcast()) on_each_cpu(ipi_flush_bp_all, NULL, 1); else - local_flush_bp_all(); + __flush_bp_all(); } diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 25956204ef23ee19b4aeb1b3e290342e484252d9..2985c9f0905d0e8667210e7bcdc0b51765781524 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -24,7 +25,6 @@ #include #include -#include /* set up by the platform code */ static void __iomem *twd_base; @@ -33,7 +33,7 @@ static struct clk *twd_clk; static unsigned long twd_timer_rate; static DEFINE_PER_CPU(bool, percpu_setup_called); -static struct clock_event_device __percpu **twd_evt; +static struct clock_event_device __percpu *twd_evt; static int twd_ppi; static void twd_set_mode(enum clock_event_mode mode, @@ -90,8 +90,10 @@ static int twd_timer_ack(void) return 0; } -static void twd_timer_stop(struct clock_event_device *clk) +static void twd_timer_stop(void) { + struct clock_event_device *clk = __this_cpu_ptr(twd_evt); + twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk); disable_percpu_irq(clk->irq); } @@ -106,7 +108,7 @@ static void twd_update_frequency(void *new_rate) { twd_timer_rate = *((unsigned long *) new_rate); - clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate); + clockevents_update_freq(__this_cpu_ptr(twd_evt), twd_timer_rate); } static int twd_rate_change(struct notifier_block *nb, @@ -132,7 +134,7 @@ static struct notifier_block twd_clk_nb = { static int twd_clk_init(void) { - if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) + if (twd_evt && __this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) return clk_notifier_register(twd_clk, &twd_clk_nb); return 0; @@ -151,7 +153,7 @@ static void twd_update_frequency(void *data) { twd_timer_rate = clk_get_rate(twd_clk); - clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate); + clockevents_update_freq(__this_cpu_ptr(twd_evt), twd_timer_rate); } static int twd_cpufreq_transition(struct notifier_block *nb, @@ -177,7 +179,7 @@ static struct notifier_block twd_cpufreq_nb = { static int twd_cpufreq_init(void) { - if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) + if (twd_evt && __this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) return cpufreq_register_notifier(&twd_cpufreq_nb, CPUFREQ_TRANSITION_NOTIFIER); @@ -228,7 +230,7 @@ static void twd_calibrate_rate(void) static irqreturn_t twd_handler(int irq, void *dev_id) { - struct clock_event_device *evt = *(struct clock_event_device **)dev_id; + struct clock_event_device *evt = dev_id; if (twd_timer_ack()) { evt->event_handler(evt); @@ -265,9 +267,9 @@ static void twd_get_clock(struct device_node *np) /* * Setup the local clock events for a CPU. */ -static int twd_timer_setup(struct clock_event_device *clk) +static void twd_timer_setup(void) { - struct clock_event_device **this_cpu_clk; + struct clock_event_device *clk = __this_cpu_ptr(twd_evt); int cpu = smp_processor_id(); /* @@ -276,9 +278,9 @@ static int twd_timer_setup(struct clock_event_device *clk) */ if (per_cpu(percpu_setup_called, cpu)) { __raw_writel(0, twd_base + TWD_TIMER_CONTROL); - clockevents_register_device(*__this_cpu_ptr(twd_evt)); + clockevents_register_device(clk); enable_percpu_irq(clk->irq, 0); - return 0; + return; } per_cpu(percpu_setup_called, cpu) = true; @@ -297,27 +299,37 @@ static int twd_timer_setup(struct clock_event_device *clk) clk->set_mode = twd_set_mode; clk->set_next_event = twd_set_next_event; clk->irq = twd_ppi; - - this_cpu_clk = __this_cpu_ptr(twd_evt); - *this_cpu_clk = clk; + clk->cpumask = cpumask_of(cpu); clockevents_config_and_register(clk, twd_timer_rate, 0xf, 0xffffffff); enable_percpu_irq(clk->irq, 0); +} - return 0; +static int twd_timer_cpu_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_STARTING: + twd_timer_setup(); + break; + case CPU_DYING: + twd_timer_stop(); + break; + } + + return NOTIFY_OK; } -static struct local_timer_ops twd_lt_ops = { - .setup = twd_timer_setup, - .stop = twd_timer_stop, +static struct notifier_block twd_timer_cpu_nb = { + .notifier_call = twd_timer_cpu_notify, }; static int __init twd_local_timer_common_register(struct device_node *np) { int err; - twd_evt = alloc_percpu(struct clock_event_device *); + twd_evt = alloc_percpu(struct clock_event_device); if (!twd_evt) { err = -ENOMEM; goto out_free; @@ -329,12 +341,22 @@ static int __init twd_local_timer_common_register(struct device_node *np) goto out_free; } - err = local_timer_register(&twd_lt_ops); + err = register_cpu_notifier(&twd_timer_cpu_nb); if (err) goto out_irq; twd_get_clock(np); + /* + * Immediately configure the timer on the boot CPU, unless we need + * jiffies to be incrementing to calibrate the rate in which case + * setup the timer in late_time_init. + */ + if (twd_timer_rate) + twd_timer_setup(); + else + late_time_init = twd_timer_setup; + return 0; out_irq: diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index c5a59546a256c9b3720022265eb08fcde0dc4f68..85a87370f144a4b383c390c39c7fa18a4be87dcb 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -74,12 +74,8 @@ struct cpu_efficiency table_efficiency[] = { {NULL, }, }; -struct cpu_capacity { - unsigned long hwid; - unsigned long capacity; -}; - -struct cpu_capacity *cpu_capacity; +unsigned long *__cpu_capacity; +#define cpu_capacity(cpu) __cpu_capacity[cpu] unsigned long middle_capacity = 1; @@ -100,15 +96,19 @@ static void __init parse_dt_topology(void) unsigned long capacity = 0; int alloc_size, cpu = 0; - alloc_size = nr_cpu_ids * sizeof(struct cpu_capacity); - cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT); + alloc_size = nr_cpu_ids * sizeof(*__cpu_capacity); + __cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT); - while ((cn = of_find_node_by_type(cn, "cpu"))) { - const u32 *rate, *reg; + for_each_possible_cpu(cpu) { + const u32 *rate; int len; - if (cpu >= num_possible_cpus()) - break; + /* too early to use cpu->of_node */ + cn = of_get_cpu_node(cpu, NULL); + if (!cn) { + pr_err("missing device node for CPU %d\n", cpu); + continue; + } for (cpu_eff = table_efficiency; cpu_eff->compatible; cpu_eff++) if (of_device_is_compatible(cn, cpu_eff->compatible)) @@ -124,12 +124,6 @@ static void __init parse_dt_topology(void) continue; } - reg = of_get_property(cn, "reg", &len); - if (!reg || len != 4) { - pr_err("%s missing reg property\n", cn->full_name); - continue; - } - capacity = ((be32_to_cpup(rate)) >> 20) * cpu_eff->efficiency; /* Save min capacity of the system */ @@ -140,13 +134,9 @@ static void __init parse_dt_topology(void) if (capacity > max_capacity) max_capacity = capacity; - cpu_capacity[cpu].capacity = capacity; - cpu_capacity[cpu++].hwid = be32_to_cpup(reg); + cpu_capacity(cpu) = capacity; } - if (cpu < num_possible_cpus()) - cpu_capacity[cpu].hwid = (unsigned long)(-1); - /* If min and max capacities are equals, we bypass the update of the * cpu_scale because all CPUs have the same capacity. Otherwise, we * compute a middle_capacity factor that will ensure that the capacity @@ -154,9 +144,7 @@ static void __init parse_dt_topology(void) * SCHED_POWER_SCALE, which is the default value, but with the * constraint explained near table_efficiency[]. */ - if (min_capacity == max_capacity) - cpu_capacity[0].hwid = (unsigned long)(-1); - else if (4*max_capacity < (3*(max_capacity + min_capacity))) + if (4*max_capacity < (3*(max_capacity + min_capacity))) middle_capacity = (min_capacity + max_capacity) >> (SCHED_POWER_SHIFT+1); else @@ -170,23 +158,12 @@ static void __init parse_dt_topology(void) * boot. The update of all CPUs is in O(n^2) for heteregeneous system but the * function returns directly for SMP system. */ -void update_cpu_power(unsigned int cpu, unsigned long hwid) +void update_cpu_power(unsigned int cpu) { - unsigned int idx = 0; - - /* look for the cpu's hwid in the cpu capacity table */ - for (idx = 0; idx < num_possible_cpus(); idx++) { - if (cpu_capacity[idx].hwid == hwid) - break; - - if (cpu_capacity[idx].hwid == -1) - return; - } - - if (idx == num_possible_cpus()) + if (!cpu_capacity(cpu)) return; - set_power_scale(cpu, cpu_capacity[idx].capacity / middle_capacity); + set_power_scale(cpu, cpu_capacity(cpu) / middle_capacity); printk(KERN_INFO "CPU%u: update cpu_power %lu\n", cpu, arch_scale_freq_power(NULL, cpu)); @@ -194,7 +171,7 @@ void update_cpu_power(unsigned int cpu, unsigned long hwid) #else static inline void parse_dt_topology(void) {} -static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {} +static inline void update_cpu_power(unsigned int cpuid) {} #endif /* @@ -281,7 +258,7 @@ void store_cpu_topology(unsigned int cpuid) update_siblings_masks(cpuid); - update_cpu_power(cpuid, mpidr & MPIDR_HWID_BITMASK); + update_cpu_power(cpuid); printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n", cpuid, cpu_topology[cpuid].thread_id, diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index ab517fcce21b8308dc957bc5b6809039c2e5f1fe..8fcda140358d94d6056ea200b79b50bb6e7bde81 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -497,28 +497,64 @@ static int bad_syscall(int n, struct pt_regs *regs) return regs->ARM_r0; } +static long do_cache_op_restart(struct restart_block *); + static inline int -do_cache_op(unsigned long start, unsigned long end, int flags) +__do_cache_op(unsigned long start, unsigned long end) { - struct mm_struct *mm = current->active_mm; - struct vm_area_struct *vma; + int ret; + unsigned long chunk = PAGE_SIZE; + + do { + if (signal_pending(current)) { + struct thread_info *ti = current_thread_info(); + + ti->restart_block = (struct restart_block) { + .fn = do_cache_op_restart, + }; + + ti->arm_restart_block = (struct arm_restart_block) { + { + .cache = { + .start = start, + .end = end, + }, + }, + }; + + return -ERESTART_RESTARTBLOCK; + } + + ret = flush_cache_user_range(start, start + chunk); + if (ret) + return ret; + cond_resched(); + start += chunk; + } while (start < end); + + return 0; +} + +static long do_cache_op_restart(struct restart_block *unused) +{ + struct arm_restart_block *restart_block; + + restart_block = ¤t_thread_info()->arm_restart_block; + return __do_cache_op(restart_block->cache.start, + restart_block->cache.end); +} + +static inline int +do_cache_op(unsigned long start, unsigned long end, int flags) +{ if (end < start || flags) return -EINVAL; - down_read(&mm->mmap_sem); - vma = find_vma(mm, start); - if (vma && vma->vm_start < end) { - if (start < vma->vm_start) - start = vma->vm_start; - if (end > vma->vm_end) - end = vma->vm_end; + if (!access_ok(VERIFY_READ, start, end - start)) + return -EFAULT; - up_read(&mm->mmap_sem); - return flush_cache_user_range(start, end); - } - up_read(&mm->mmap_sem); - return -EINVAL; + return __do_cache_op(start, end); } /* diff --git a/arch/arm/kernel/v7m.c b/arch/arm/kernel/v7m.c new file mode 100644 index 0000000000000000000000000000000000000000..4d2cba94f5ccb2d8077f0ecad5aedcaebab9eda3 --- /dev/null +++ b/arch/arm/kernel/v7m.c @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2013 Uwe Kleine-Koenig for Pengutronix + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include +#include +#include +#include + +void armv7m_restart(enum reboot_mode mode, const char *cmd) +{ + dsb(); + __raw_writel(V7M_SCB_AIRCR_VECTKEY | V7M_SCB_AIRCR_SYSRESETREQ, + BASEADDR_V7M_SCB + V7M_SCB_AIRCR); + dsb(); +} diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 741f66a2edbd77bf3ddce5a53c6cb760e491c7fe..9c697db2787e2a524cf59db4519f5272fa2918b0 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -219,6 +219,10 @@ long kvm_arch_dev_ioctl(struct file *filp, return -EINVAL; } +void kvm_arch_memslots_updated(struct kvm *kvm) +{ +} + int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, struct kvm_userspace_memory_region *mem, diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index f048338135f7a5b20bf52371d03a3af0b922b68f..1b9844d369cc08e6e1a88fc60b6f3fd6db0b6965 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -142,7 +142,7 @@ target: @ We're now in the trampoline code, switch page tables @ Invalidate the old TLBs mcr p15, 4, r0, c8, c7, 0 @ TLBIALLH - dsb + dsb ish eret diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 16cd4ba5d7fd6d0ff0781da759712167cbc17508..ddc15539bad2c5996dcd5167e694b16dbdd9488b 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -55,7 +55,7 @@ ENTRY(__kvm_tlb_flush_vmid_ipa) mcrr p15, 6, r2, r3, c2 @ Write VTTBR isb mcr p15, 0, r0, c8, c3, 0 @ TLBIALLIS (rt ignored) - dsb + dsb ish isb mov r2, #0 mov r3, #0 @@ -79,7 +79,7 @@ ENTRY(__kvm_flush_vm_context) mcr p15, 4, r0, c8, c3, 4 /* Invalidate instruction caches Inner Shareable (ICIALLUIS) */ mcr p15, 0, r0, c7, c1, 0 - dsb + dsb ish isb @ Not necessary if followed by eret bx lr @@ -492,10 +492,10 @@ __kvm_hyp_code_end: .section ".rodata" und_die_str: - .ascii "unexpected undefined exception in Hyp mode at: %#08x" + .ascii "unexpected undefined exception in Hyp mode at: %#08x\n" pabt_die_str: - .ascii "unexpected prefetch abort in Hyp mode at: %#08x" + .ascii "unexpected prefetch abort in Hyp mode at: %#08x\n" dabt_die_str: - .ascii "unexpected data abort in Hyp mode at: %#08x" + .ascii "unexpected data abort in Hyp mode at: %#08x\n" svc_die_str: - .ascii "unexpected HVC/SVC trap in Hyp mode at: %#08x" + .ascii "unexpected HVC/SVC trap in Hyp mode at: %#08x\n" diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 0988d9e04dd4c21dab8eae53205e92fafe809dfd..b0de86b56c13006a189efba24967b81d162a56d6 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -489,7 +489,6 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa, for (addr = guest_ipa; addr < end; addr += PAGE_SIZE) { pte_t pte = pfn_pte(pfn, PAGE_S2_DEVICE); - kvm_set_s2pte_writable(&pte); ret = mmu_topup_memory_cache(&cache, 2, 2); if (ret) diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index b7840e7aa4529ac73e34c29e26c0002ef033306d..71e08baee209387f899e14a32fa32e02682b0ae8 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -40,7 +40,7 @@ static struct kvm_regs a15_regs_reset = { }; static const struct kvm_irq_level a15_vtimer_irq = { - .irq = 27, + { .irq = 27 }, .level = 1, }; diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h index a8e73ed5ad5b710fc73de0006255bd1dfd6713ef..b1d640f78623971337ad08072efdcc981c124c0f 100644 --- a/arch/arm/kvm/trace.h +++ b/arch/arm/kvm/trace.h @@ -59,10 +59,9 @@ TRACE_EVENT(kvm_guest_fault, __entry->ipa = ipa; ), - TP_printk("guest fault at PC %#08lx (hxfar %#08lx, " - "ipa %#16llx, hsr %#08lx", - __entry->vcpu_pc, __entry->hxfar, - __entry->ipa, __entry->hsr) + TP_printk("ipa %#llx, hsr %#08lx, hxfar %#08lx, pc %#08lx", + __entry->ipa, __entry->hsr, + __entry->hxfar, __entry->vcpu_pc) ); TRACE_EVENT(kvm_irq_line, diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index af72969820b4951448c9d95135383ae9d8387cde..aaf3a87311360d5c9db1531db9c3436af26237cd 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -45,3 +45,9 @@ lib-$(CONFIG_ARCH_SHARK) += io-shark.o $(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S $(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S + +ifeq ($(CONFIG_KERNEL_MODE_NEON),y) + NEON_FLAGS := -mfloat-abi=softfp -mfpu=neon + CFLAGS_xor-neon.o += $(NEON_FLAGS) + lib-$(CONFIG_XOR_BLOCKS) += xor-neon.o +endif diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c new file mode 100644 index 0000000000000000000000000000000000000000..f485e5a2af4bbbe2e931668adbc69fc7f4ec6359 --- /dev/null +++ b/arch/arm/lib/xor-neon.c @@ -0,0 +1,42 @@ +/* + * linux/arch/arm/lib/xor-neon.c + * + * Copyright (C) 2013 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#ifndef __ARM_NEON__ +#error You should compile this file with '-mfloat-abi=softfp -mfpu=neon' +#endif + +/* + * Pull in the reference implementations while instructing GCC (through + * -ftree-vectorize) to attempt to exploit implicit parallelism and emit + * NEON instructions. + */ +#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6) +#pragma GCC optimize "tree-vectorize" +#else +/* + * While older versions of GCC do not generate incorrect code, they fail to + * recognize the parallel nature of these functions, and emit plain ARM code, + * which is known to be slower than the optimized ARM code in asm-arm/xor.h. + */ +#warning This code requires at least version 4.6 of GCC +#endif + +#pragma GCC diagnostic ignored "-Wunused-variable" +#include + +struct xor_block_template const xor_block_neon_inner = { + .name = "__inner_neon__", + .do_2 = xor_8regs_2, + .do_3 = xor_8regs_3, + .do_4 = xor_8regs_4, + .do_5 = xor_8regs_5, +}; diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index ad95f6a23a2877b4aa917a0fecb8f72aeb4f9c00..bf00d15d954d3d3f1b6ce1d55ec5840890518fa4 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -42,20 +42,15 @@ static int ksz9021rn_phy_fixup(struct phy_device *phy) { int value; -#define GMII_RCCPSR 260 -#define GMII_RRDPSR 261 -#define GMII_ERCR 11 -#define GMII_ERDWR 12 - /* Set delay values */ - value = GMII_RCCPSR | 0x8000; - phy_write(phy, GMII_ERCR, value); + value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000; + phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); value = 0xF2F4; - phy_write(phy, GMII_ERDWR, value); - value = GMII_RRDPSR | 0x8000; - phy_write(phy, GMII_ERCR, value); + phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); + value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000; + phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); value = 0x2222; - phy_write(phy, GMII_ERDWR, value); + phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); return 0; } diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 3aaa9784cf0ec1850a1f82e474ab7471c1011650..f1d49e929ccbb039594b7f3b27cb332232fd403a 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h index 8e7ed5c9081758291c8eddf9837b8869a7154250..048a57f76bd3bbbac837e543cd4a4a7048b5e3e0 100644 --- a/arch/arm/mach-at91/include/mach/at91_adc.h +++ b/arch/arm/mach-at91/include/mach/at91_adc.h @@ -28,9 +28,12 @@ #define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) #define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ #define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ -#define AT91_ADC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */ +#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */ +#define AT91_ADC_PRESCAL_9G45 (0xff << 8) #define AT91_ADC_PRESCAL_(x) ((x) << 8) -#define AT91_ADC_STARTUP (0x1f << 16) /* Startup Up Time */ +#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */ +#define AT91_ADC_STARTUP_9G45 (0x7f << 16) +#define AT91_ADC_STARTUP_9X5 (0xf << 16) #define AT91_ADC_STARTUP_(x) ((x) << 16) #define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ #define AT91_ADC_SHTIM_(x) ((x) << 24) @@ -48,6 +51,9 @@ #define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ #define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ +#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */ +#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */ + #define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ #define AT91_ADC_LDATA (0x3ff) @@ -58,4 +64,10 @@ #define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ #define AT91_ADC_DATA (0x3ff) +#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */ + +#define AT91_ADC_TRGR_9260 AT91_ADC_MR +#define AT91_ADC_TRGR_9G45 0x08 +#define AT91_ADC_TRGR_9X5 0xC0 + #endif diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index f11289519c399c09c8e9725c78f5097a00644319..69d67f714a2fc662901d15aa68b8530c32a2d9d4 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -12,6 +12,7 @@ config ARCH_BCM select GPIO_BCM select SPARSE_IRQ select TICK_ONESHOT + select CACHE_L2X0 help This enables support for system based on Broadcom SoCs. It currently supports the 'BCM281XX' family, which includes diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 6adb6aecf48fcd235a2b26397f750ee3c77359b1..e3d03033a7e2749c30eb5f18e28ec45adf42d096 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2012 Broadcom Corporation +# Copyright (C) 2012-2013 Broadcom Corporation # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as @@ -10,6 +10,6 @@ # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. -obj-$(CONFIG_ARCH_BCM) := board_bcm.o bcm_kona_smc.o bcm_kona_smc_asm.o +obj-$(CONFIG_ARCH_BCM) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index 56d9d19b24703896bb572dace20585efd012d9b6..5e31e918f32518439e72dc4bfa1dd54538244c5f 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -36,18 +36,20 @@ struct bcm_kona_smc_data { }; static const struct of_device_id bcm_kona_smc_ids[] __initconst = { - {.compatible = "bcm,kona-smc"}, + {.compatible = "brcm,kona-smc"}, + {.compatible = "bcm,kona-smc"}, /* deprecated name */ {}, }; /* Map in the bounce area */ -void __init bcm_kona_smc_init(void) +int __init bcm_kona_smc_init(void) { struct device_node *node; /* Read buffer addr and size from the device tree node */ node = of_find_matching_node(NULL, bcm_kona_smc_ids); - BUG_ON(!node); + if (!node) + return -ENODEV; /* Don't care about size or flags of the DT node */ bridge_data.buffer_addr = @@ -59,7 +61,9 @@ void __init bcm_kona_smc_init(void) bridge_data.initialized = 1; - pr_info("Secure API initialized!\n"); + pr_info("Kona Secure API initialized\n"); + + return 0; } /* __bcm_kona_smc() should only run on CPU 0, with pre-emption disabled */ diff --git a/arch/arm/mach-bcm/bcm_kona_smc.h b/arch/arm/mach-bcm/bcm_kona_smc.h index 3bedbed1c21bd3b66b79a06cd27e0dbd7fd15e6a..d098a7e7674429165197e5fedb2d6f469774c279 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.h +++ b/arch/arm/mach-bcm/bcm_kona_smc.h @@ -64,7 +64,7 @@ #define SSAPI_BRCM_START_VC_CORE 0x0E000008 #ifndef __ASSEMBLY__ -extern void bcm_kona_smc_init(void); +extern int __init bcm_kona_smc_init(void); extern unsigned bcm_kona_smc(unsigned service_id, unsigned arg0, diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm281xx.c similarity index 68% rename from arch/arm/mach-bcm/board_bcm.c rename to arch/arm/mach-bcm/board_bcm281xx.c index 28599326d4adaf33fcdbb69c7cfddfc20bf616c2..8d9f931164bb8544aa046f01d2938bb9703cb183 100644 --- a/arch/arm/mach-bcm/board_bcm.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 Broadcom Corporation + * Copyright (C) 2012-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -21,23 +21,39 @@ #include #include - #include "bcm_kona_smc.h" +#include "kona.h" static int __init kona_l2_cache_init(void) { if (!IS_ENABLED(CONFIG_CACHE_L2X0)) return 0; + if (bcm_kona_smc_init() < 0) { + pr_info("Kona secure API not available. Skipping L2 init\n"); + return 0; + } + bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0); /* * The aux_val and aux_mask have no effect since L2 cache is already * enabled. Pass 0s for aux_val and 1s for aux_mask for default value. */ - l2x0_of_init(0, ~0); + return l2x0_of_init(0, ~0); +} - return 0; +static void bcm_board_setup_restart(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "brcm,bcm11351"); + if (np) { + if (of_device_is_available(np)) + bcm_kona_setup_restart(); + of_node_put(np); + } + /* Restart setup for other boards goes here */ } static void __init board_init(void) @@ -45,15 +61,15 @@ static void __init board_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, &platform_bus); - bcm_kona_smc_init(); - + bcm_board_setup_restart(); kona_l2_cache_init(); } -static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, }; +static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, }; DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor") .init_time = clocksource_of_init, .init_machine = board_init, + .restart = bcm_kona_restart, .dt_compat = bcm11351_dt_compat, MACHINE_END diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona.c new file mode 100644 index 0000000000000000000000000000000000000000..6939d9017f63369c3c34cba1921869ea7a873583 --- /dev/null +++ b/arch/arm/mach-bcm/kona.c @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include + +#include "kona.h" + +static void __iomem *watchdog_base; + +void bcm_kona_setup_restart(void) +{ + struct device_node *np_wdog; + + /* + * The assumption is that whoever calls bcm_kona_setup_restart() + * also needs a Kona Watchdog Timer entry in Device Tree, i.e. we + * report an error if the DT entry is missing. + */ + np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt"); + if (!np_wdog) { + pr_err("brcm,kona-wdt not found in DT, reboot disabled\n"); + return; + } + watchdog_base = of_iomap(np_wdog, 0); + WARN(!watchdog_base, "failed to map watchdog base"); + of_node_put(np_wdog); +} + +#define SECWDOG_OFFSET 0x00000000 +#define SECWDOG_RESERVED_MASK 0xE2000000 +#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000 +#define SECWDOG_EN_MASK 0x08000000 +#define SECWDOG_SRSTEN_MASK 0x04000000 +#define SECWDOG_CLKS_SHIFT 20 +#define SECWDOG_LOCK_SHIFT 0 + +void bcm_kona_restart(enum reboot_mode mode, const char *cmd) +{ + uint32_t val; + + if (!watchdog_base) + panic("Watchdog not mapped. Reboot failed.\n"); + + /* Enable watchdog2 with very short timeout. */ + val = readl(watchdog_base + SECWDOG_OFFSET); + val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK; + val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK | + (0x8 << SECWDOG_CLKS_SHIFT) | + (0x8 << SECWDOG_LOCK_SHIFT); + writel(val, watchdog_base + SECWDOG_OFFSET); + + while (1) + ; +} diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona.h new file mode 100644 index 0000000000000000000000000000000000000000..291eca3e06ff1f0d6e27cd10e2f1d4a29c96cb21 --- /dev/null +++ b/arch/arm/mach-bcm/kona.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +void bcm_kona_setup_restart(void); +void bcm_kona_restart(enum reboot_mode mode, const char *cmd); diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 01ad4d41e728f3a6dac994a99706bc42aa195de2..bea6295c8c590b3e0da4309e91bf854000907c4f 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -33,9 +33,6 @@ config ARCH_P720T Say Y here if you intend to run this kernel on the ARM Prospector 720T. -config ARCH_FORTUNET - bool "FORTUNET" - config EP72XX_ROM_BOOT bool "EP721x/EP731x ROM boot" help diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index f30ed2b496fba6caf98a6c633d70af4ca43ff1ab..f04151efd96aa15c7b0c4b743cf0a19aa88dc47f 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -10,5 +10,4 @@ obj-$(CONFIG_ARCH_AUTCPU12) += board-autcpu12.o obj-$(CONFIG_ARCH_CDB89712) += board-cdb89712.o obj-$(CONFIG_ARCH_CLEP7312) += board-clep7312.o obj-$(CONFIG_ARCH_EDB7211) += board-edb7211.o -obj-$(CONFIG_ARCH_FORTUNET) += board-fortunet.o obj-$(CONFIG_ARCH_P720T) += board-p720t.o diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c index 5867aebd8d0cde6bb497c9c797a7360b81781643..f8d71a89644ab222f08a33f7d81e5fb4964ff4b8 100644 --- a/arch/arm/mach-clps711x/board-autcpu12.c +++ b/arch/arm/mach-clps711x/board-autcpu12.c @@ -259,11 +259,7 @@ static void __init autcpu12_init(void) static void __init autcpu12_init_late(void) { gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios)); - - if (IS_ENABLED(MTD_NAND_GPIO) && IS_ENABLED(GPIO_GENERIC_PLATFORM)) { - /* We are need both drivers to handle NAND */ - platform_device_register(&autcpu12_nand_pdev); - } + platform_device_register(&autcpu12_nand_pdev); } MACHINE_START(AUTCPU12, "autronix autcpu12") diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c index 9dfb990f08013060f72df49f81a29831a4be4cc5..fe6184ead89668d0f10b9e22b07d0ee05c867137 100644 --- a/arch/arm/mach-clps711x/board-edb7211.c +++ b/arch/arm/mach-clps711x/board-edb7211.c @@ -126,21 +126,6 @@ static struct gpio edb7211_gpios[] __initconst = { { EDB7211_LCDBL, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT" }, }; -static struct map_desc edb7211_io_desc[] __initdata = { - { /* Memory-mapped extra keyboard row */ - .virtual = IO_ADDRESS(EDB7211_EXTKBD_BASE), - .pfn = __phys_to_pfn(EDB7211_EXTKBD_BASE), - .length = SZ_1M, - .type = MT_DEVICE, - }, -}; - -void __init edb7211_map_io(void) -{ - clps711x_map_io(); - iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc)); -} - /* Reserve screen memory region at the start of main system memory. */ static void __init edb7211_reserve(void) { @@ -195,7 +180,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") .nr_irqs = CLPS711X_NR_IRQS, .fixup = fixup_edb7211, .reserve = edb7211_reserve, - .map_io = edb7211_map_io, + .map_io = clps711x_map_io, .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, diff --git a/arch/arm/mach-clps711x/board-fortunet.c b/arch/arm/mach-clps711x/board-fortunet.c deleted file mode 100644 index b1561e3d7c5c325e7250156396306a9c629af9a6..0000000000000000000000000000000000000000 --- a/arch/arm/mach-clps711x/board-fortunet.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/fortunet.c - * - * Derived from linux/arch/arm/mach-integrator/arch.c - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include - -#include -#include -#include - -#include - -#include - -#include "common.h" - -struct meminfo memmap = { - .nr_banks = 1, - .bank = { - { - .start = 0xC0000000, - .size = 0x01000000, - }, - }, -}; - -typedef struct tag_IMAGE_PARAMS -{ - int ramdisk_ok; - int ramdisk_address; - int ramdisk_size; - int ram_size; - int extra_param_type; - int extra_param_ptr; - int command_line; -} IMAGE_PARAMS; - -#define IMAGE_PARAMS_PHYS 0xC01F0000 - -static void __init -fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) -{ - IMAGE_PARAMS *ip = phys_to_virt(IMAGE_PARAMS_PHYS); - *cmdline = phys_to_virt(ip->command_line); -#ifdef CONFIG_BLK_DEV_INITRD - if(ip->ramdisk_ok) - { - initrd_start = __phys_to_virt(ip->ramdisk_address); - initrd_end = initrd_start + ip->ramdisk_size; - } -#endif - memmap.bank[0].size = ip->ram_size; - *mi = memmap; -} - -MACHINE_START(FORTUNET, "ARM-FortuNet") - /* Maintainer: FortuNet Inc. */ - .nr_irqs = CLPS711X_NR_IRQS, - .fixup = fortunet_fixup, - .map_io = clps711x_map_io, - .init_early = clps711x_init_early, - .init_irq = clps711x_init_irq, - .init_time = clps711x_timer_init, - .handle_irq = clps711x_handle_irq, - .restart = clps711x_restart, -MACHINE_END diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c index 856b81cf2f8a59f35654e2ea73a9193678938cb3..fb77d1448fec880f115d45593e7ffd2a171883fa 100644 --- a/arch/arm/mach-clps711x/devices.c +++ b/arch/arm/mach-clps711x/devices.c @@ -57,7 +57,7 @@ static void __init clps711x_add_syscon(void) unsigned i; for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++) - platform_device_register_simple("clps711x-syscon", i + 1, + platform_device_register_simple("syscon", i + 1, &clps711x_syscon_res[i], 1); } diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 1332de8c52c99dce492c57612e778229ec6a64bd..c4bdc0a1c36e7795a21862f8a69a7e8ead71a43b 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -185,10 +185,6 @@ static __init void da830_evm_usb_init(void) __func__, ret); } -static struct davinci_uart_config da830_evm_uart_config __initdata = { - .enabled_uarts = 0x7, -}; - static const short da830_evm_mcasp1_pins[] = { DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1, DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5, @@ -630,7 +626,7 @@ static __init void da830_evm_init(void) pr_warning("da830_evm_init: watchdog registration failed: %d\n", ret); - davinci_serial_init(&da830_evm_uart_config); + davinci_serial_init(da8xx_serial_device); i2c_register_board_info(1, da830_evm_i2c_devices, ARRAY_SIZE(da830_evm_i2c_devices)); diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index bea6793a7ede41cb04822303956d28347037460b..dd1fb24521aa85b16baa9d200b40d28774591cfc 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include #include @@ -746,10 +746,6 @@ static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = { .bus_delay = 0, /* usec */ }; -static struct davinci_uart_config da850_evm_uart_config __initdata = { - .enabled_uarts = 0x7, -}; - /* davinci da850 evm audio machine driver */ static u8 da850_iis_serializer_direction[] = { INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, @@ -1249,12 +1245,10 @@ static struct vpif_capture_config da850_vpif_capture_config = { static struct adv7343_platform_data adv7343_pdata = { .mode_config = { - .dac_3 = 1, - .dac_2 = 1, - .dac_1 = 1, + .dac = { 1, 1, 1 }, }, .sd_config = { - .sd_dac_out1 = 1, + .sd_dac_out = { 1 }, }, }; @@ -1494,7 +1488,7 @@ static __init void da850_evm_init(void) __func__, ret); } - davinci_serial_init(&da850_evm_uart_config); + davinci_serial_init(da8xx_serial_device); i2c_register_board_info(1, da850_evm_i2c_devices, ARRAY_SIZE(da850_evm_i2c_devices)); diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index c2a0a67d09e011446a60d8de0e913459f6139d86..42b23a3194a05d9052026e2f14c4a0fe5a9cc67e 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -314,10 +314,6 @@ static struct platform_device *davinci_evm_devices[] __initdata = { &davinci_nand_device, }; -static struct davinci_uart_config uart_config __initdata = { - .enabled_uarts = (1 << 0), -}; - static void __init dm355_evm_map_io(void) { dm355_init(); @@ -393,7 +389,7 @@ static __init void dm355_evm_init(void) platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); - davinci_serial_init(&uart_config); + davinci_serial_init(dm355_serial_device); /* NOTE: NAND flash timings set by the UBL are slower than * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204 diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 139e42da25f061baa0128c7615723da54e068592..65a984c52df6fce12732ee0ff1b09902bb23d81a 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -173,10 +173,6 @@ static struct platform_device *davinci_leopard_devices[] __initdata = { &davinci_nand_device, }; -static struct davinci_uart_config uart_config __initdata = { - .enabled_uarts = (1 << 0), -}; - static void __init dm355_leopard_map_io(void) { dm355_init(); @@ -252,7 +248,7 @@ static __init void dm355_leopard_init(void) platform_add_devices(davinci_leopard_devices, ARRAY_SIZE(davinci_leopard_devices)); leopard_init_i2c(); - davinci_serial_init(&uart_config); + davinci_serial_init(dm355_serial_device); /* NOTE: NAND flash timings set by the UBL are slower than * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204 diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 4cdb61c5445943d7aa2e9a50b23c151b0ecf6a9c..92b7f770615a83aaf59d5b81ef3526732185df86 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -718,10 +718,6 @@ static void __init evm_init_cpld(void) /* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */ } -static struct davinci_uart_config uart_config __initdata = { - .enabled_uarts = (1 << 0), -}; - static void __init dm365_evm_map_io(void) { dm365_init(); @@ -748,7 +744,7 @@ static struct spi_board_info dm365_evm_spi_info[] __initconst = { static __init void dm365_evm_init(void) { evm_init_i2c(); - davinci_serial_init(&uart_config); + davinci_serial_init(dm365_serial_device); dm365evm_emac_configure(); dm365evm_mmc_configure(); diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index fa4bfaf952d886abcc94fd20bbb46285bd4cada6..40bb9b5b87e829c2d4b741625141a58732921d9f 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -727,10 +727,6 @@ static struct platform_device *davinci_evm_devices[] __initdata = { &rtc_dev, }; -static struct davinci_uart_config uart_config __initdata = { - .enabled_uarts = (1 << 0), -}; - static void __init davinci_evm_map_io(void) { @@ -792,7 +788,7 @@ static __init void davinci_evm_init(void) davinci_setup_mmc(0, &dm6446evm_mmc_config); dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg); - davinci_serial_init(&uart_config); + davinci_serial_init(dm644x_serial_device); dm644x_init_asp(&dm644x_evm_snd_data); /* irlml6401 switches over 1A, in under 8 msec */ diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 0c005e876cac6fbd226c1700cfe47818b80dc6ee..2bc3651d56cc8f52757b3703c14daadf2360abeb 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -750,10 +750,6 @@ static void __init davinci_map_io(void) cdce_clk_init(); } -static struct davinci_uart_config uart_config __initdata = { - .enabled_uarts = (1 << 0), -}; - #define DM646X_EVM_PHY_ID "davinci_mdio-0:01" /* * The following EDMA channels/slots are not being used by drivers (for @@ -793,7 +789,7 @@ static __init void evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; evm_init_i2c(); - davinci_serial_init(&uart_config); + davinci_serial_init(dm646x_serial_device); dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 9549d53aa63f0489f741a6a7f43b83b9a2505a05..cd0f58730c2ba63234fb5e673156c10214300a80 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -434,10 +434,6 @@ static void __init mityomapl138_setup_nand(void) ARRAY_SIZE(mityomapl138_devices)); } -static struct davinci_uart_config mityomapl138_uart_config __initdata = { - .enabled_uarts = 0x7, -}; - static const short mityomap_mii_pins[] = { DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, @@ -517,7 +513,7 @@ static void __init mityomapl138_init(void) if (ret) pr_warning("watchdog registration failed: %d\n", ret); - davinci_serial_init(&mityomapl138_uart_config); + davinci_serial_init(da8xx_serial_device); ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata); if (ret) diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 808233b60e3d0047e257227d50d49955c816228d..46f336fca80384541257e667383d85080b718b1b 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -154,10 +154,6 @@ static struct platform_device *davinci_ntosd2_devices[] __initdata = { &ntosd2_leds_dev, }; -static struct davinci_uart_config uart_config __initdata = { - .enabled_uarts = (1 << 0), -}; - static void __init davinci_ntosd2_map_io(void) { dm644x_init(); @@ -198,7 +194,7 @@ static __init void davinci_ntosd2_init(void) platform_add_devices(davinci_ntosd2_devices, ARRAY_SIZE(davinci_ntosd2_devices)); - davinci_serial_init(&uart_config); + davinci_serial_init(dm644x_serial_device); dm644x_init_asp(&dm644x_ntosd2_snd_data); soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID; diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index b8c20de10ca2b07b276d03bd1f3d37ae9a9701e2..ab98c75cabb48b7ed2cee6518fddca615f58f6e3 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -286,15 +286,11 @@ static __init void omapl138_hawk_usb_init(void) gpio_free(DA850_USB1_VBUS_PIN); } -static struct davinci_uart_config omapl138_hawk_uart_config __initdata = { - .enabled_uarts = 0x7, -}; - static __init void omapl138_hawk_init(void) { int ret; - davinci_serial_init(&omapl138_hawk_uart_config); + davinci_serial_init(da8xx_serial_device); omapl138_hawk_config_emac(); diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 513eee14f77dd059145d16078d19647546cad57b..d84360148100831265561696b1e661f16a035361 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -125,10 +125,6 @@ static struct platform_device *davinci_sffsdr_devices[] __initdata = { &davinci_sffsdr_nandflash_device, }; -static struct davinci_uart_config uart_config __initdata = { - .enabled_uarts = (1 << 0), -}; - static void __init davinci_sffsdr_map_io(void) { dm644x_init(); @@ -141,7 +137,7 @@ static __init void davinci_sffsdr_init(void) platform_add_devices(davinci_sffsdr_devices, ARRAY_SIZE(davinci_sffsdr_devices)); sffsdr_init_i2c(); - davinci_serial_init(&uart_config); + davinci_serial_init(dm644x_serial_device); soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID; davinci_setup_usb(0, 0); /* We support only peripheral mode. */ diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index 36aef3a7dedb074c5e036ee5f7af8ccec5053bcf..f1ac1c94ac0f363123842f4e9077c2bd58e645df 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -65,7 +65,7 @@ static struct cpuidle_driver davinci_idle_driver = { .states[1] = { .enter = davinci_enter_idle, .exit_latency = 10, - .target_residency = 100000, + .target_residency = 10000, .flags = CPUIDLE_FLAG_TIME_VALID, .name = "DDR SR", .desc = "WFI and DDR Self Refresh", diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index abbaf0270be6550795b824e36b6fda2de933c3aa..d6c746e35ad9fe196e947994de330fefda3e1962 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -395,9 +395,9 @@ static struct clk_lookup da830_clks[] = { CLK(NULL, "tptc0", &tptc0_clk), CLK(NULL, "tptc1", &tptc1_clk), CLK("da830-mmc.0", NULL, &mmcsd_clk), - CLK(NULL, "uart0", &uart0_clk), - CLK(NULL, "uart1", &uart1_clk), - CLK(NULL, "uart2", &uart2_clk), + CLK("serial8250.0", NULL, &uart0_clk), + CLK("serial8250.1", NULL, &uart1_clk), + CLK("serial8250.2", NULL, &uart2_clk), CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), CLK(NULL, "ecap0", &ecap0_clk), @@ -417,6 +417,7 @@ static struct clk_lookup da830_clks[] = { CLK(NULL, "aintc", &aintc_clk), CLK(NULL, "secu_mgr", &secu_mgr_clk), CLK("davinci_emac.1", NULL, &emac_clk), + CLK("davinci_mdio.0", "fck", &emac_clk), CLK(NULL, "gpio", &gpio_clk), CLK("i2c_davinci.2", NULL, &i2c1_clk), CLK(NULL, "usb11", &usb11_clk), @@ -1199,7 +1200,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = { .gpio_base = DA8XX_GPIO_BASE, .gpio_num = 128, .gpio_irq = IRQ_DA8XX_GPIO0, - .serial_dev = &da8xx_serial_device, .emac_pdata = &da8xx_emac_pdata, }; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index a0d4f6038b608f187eedc4a0cf89b0b97ce6a49c..f56e5fbfa2fd20ebd0a8fd18adaee48463e632b2 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -451,9 +451,9 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "tpcc1", &tpcc1_clk), CLK(NULL, "tptc2", &tptc2_clk), CLK("pruss_uio", "pruss", &pruss_clk), - CLK(NULL, "uart0", &uart0_clk), - CLK(NULL, "uart1", &uart1_clk), - CLK(NULL, "uart2", &uart2_clk), + CLK("serial8250.0", NULL, &uart0_clk), + CLK("serial8250.1", NULL, &uart1_clk), + CLK("serial8250.2", NULL, &uart2_clk), CLK(NULL, "aintc", &aintc_clk), CLK(NULL, "gpio", &gpio_clk), CLK("i2c_davinci.2", NULL, &i2c1_clk), @@ -461,6 +461,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "arm", &arm_clk), CLK(NULL, "rmii", &rmii_clk), CLK("davinci_emac.1", NULL, &emac_clk), + CLK("davinci_mdio.0", "fck", &emac_clk), CLK("davinci-mcasp.0", NULL, &mcasp_clk), CLK("da8xx_lcdc.0", "fck", &lcdc_clk), CLK("da830-mmc.0", NULL, &mmcsd0_clk), @@ -1301,7 +1302,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = { .gpio_base = DA8XX_GPIO_BASE, .gpio_num = 144, .gpio_irq = IRQ_DA8XX_GPIO0, - .serial_dev = &da8xx_serial_device, .emac_pdata = &da8xx_emac_pdata, .sram_dma = DA8XX_SHARED_RAM_BASE, .sram_len = SZ_128K, diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index 961aea8bbad5358a503612926b15ecbc8d42fd79..d2bc574ae172cfbfc2671f24372c137baa73056d 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -20,13 +20,6 @@ #define DA8XX_NUM_UARTS 3 -static void __init da8xx_uart_clk_enable(void) -{ - int i; - for (i = 0; i < DA8XX_NUM_UARTS; i++) - davinci_serial_setup_clk(i, NULL); -} - static struct of_device_id da8xx_irq_match[] __initdata = { { .compatible = "ti,cp-intc", .data = cp_intc_of_init, }, { } @@ -47,6 +40,12 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL), OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL), OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL), + OF_DEV_AUXDATA("ns16550a", 0x01c42000, "serial8250.0", NULL), + OF_DEV_AUXDATA("ns16550a", 0x01d0c000, "serial8250.1", NULL), + OF_DEV_AUXDATA("ns16550a", 0x01d0d000, "serial8250.2", NULL), + OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL), + OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1", + NULL), {} }; @@ -57,7 +56,6 @@ static void __init da850_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, da850_auxdata_lookup, NULL); - da8xx_uart_clk_enable(); } static const char *da850_boards_compat[] __initdata = { diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index a883043d0820c7afe14db5f2b7f00f101606d662..2ab5d577186f4177fd06c414b31d25c21d295f8f 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -106,4 +106,9 @@ int dm646x_init_edma(struct edma_rsv_info *rsv); void dm646x_video_init(void); void dm646x_setup_vpif(struct vpif_display_config *, struct vpif_capture_config *); + +extern struct platform_device dm365_serial_device[]; +extern struct platform_device dm355_serial_device[]; +extern struct platform_device dm644x_serial_device[]; +extern struct platform_device dm646x_serial_device[]; #endif /*__DAVINCI_H */ diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 71a46a348761d38c3aea5eb26313eb4513384eb1..2e473fefd71ebc2049d490f554da0f8a70d2578b 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -68,7 +68,7 @@ void __iomem *da8xx_syscfg0_base; void __iomem *da8xx_syscfg1_base; -static struct plat_serial8250_port da8xx_serial_pdata[] = { +static struct plat_serial8250_port da8xx_serial0_pdata[] = { { .mapbase = DA8XX_UART0_BASE, .irq = IRQ_DA8XX_UARTINT0, @@ -77,6 +77,11 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = { .iotype = UPIO_MEM, .regshift = 2, }, + { + .flags = 0, + } +}; +static struct plat_serial8250_port da8xx_serial1_pdata[] = { { .mapbase = DA8XX_UART1_BASE, .irq = IRQ_DA8XX_UARTINT1, @@ -85,6 +90,11 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = { .iotype = UPIO_MEM, .regshift = 2, }, + { + .flags = 0, + } +}; +static struct plat_serial8250_port da8xx_serial2_pdata[] = { { .mapbase = DA8XX_UART2_BASE, .irq = IRQ_DA8XX_UARTINT2, @@ -95,15 +105,33 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = { }, { .flags = 0, - }, + } }; -struct platform_device da8xx_serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = da8xx_serial_pdata, +struct platform_device da8xx_serial_device[] = { + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = da8xx_serial0_pdata, + } + }, + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = da8xx_serial1_pdata, + } + }, + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = da8xx_serial2_pdata, + } }, + { + } }; static s8 da8xx_queue_tc_mapping[][2] = { @@ -453,12 +481,8 @@ int __init da8xx_register_emac(void) ret = platform_device_register(&da8xx_mdio_device); if (ret < 0) return ret; - ret = platform_device_register(&da8xx_emac_device); - if (ret < 0) - return ret; - ret = clk_add_alias(NULL, dev_name(&da8xx_mdio_device.dev), - NULL, &da8xx_emac_device.dev); - return ret; + + return platform_device_register(&da8xx_emac_device); } static struct resource da830_mcasp1_resources[] = { @@ -828,14 +852,7 @@ static struct platform_device da8xx_rtc_device = { int da8xx_register_rtc(void) { - int ret; - - ret = platform_device_register(&da8xx_rtc_device); - if (!ret) - /* Atleast on DA850, RTC is a wakeup source */ - device_init_wakeup(&da8xx_rtc_device.dev, true); - - return ret; + return platform_device_register(&da8xx_rtc_device); } static void __iomem *da8xx_ddr2_ctlr_base; diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c index 128cb9ae80f4c7d368c190ea380d6a4698053490..01d8686e553c8e6279ee5c837237ed74d6d47e0a 100644 --- a/arch/arm/mach-davinci/devices-tnetv107x.c +++ b/arch/arm/mach-davinci/devices-tnetv107x.c @@ -126,7 +126,7 @@ static struct platform_device edma_device = { .dev.platform_data = tnetv107x_edma_info, }; -static struct plat_serial8250_port serial_data[] = { +static struct plat_serial8250_port serial0_platform_data[] = { { .mapbase = TNETV107X_UART0_BASE, .irq = IRQ_TNETV107X_UART0, @@ -136,6 +136,11 @@ static struct plat_serial8250_port serial_data[] = { .iotype = UPIO_MEM32, .regshift = 2, }, + { + .flags = 0, + } +}; +static struct plat_serial8250_port serial1_platform_data[] = { { .mapbase = TNETV107X_UART1_BASE, .irq = IRQ_TNETV107X_UART1, @@ -145,6 +150,11 @@ static struct plat_serial8250_port serial_data[] = { .iotype = UPIO_MEM32, .regshift = 2, }, + { + .flags = 0, + } +}; +static struct plat_serial8250_port serial2_platform_data[] = { { .mapbase = TNETV107X_UART2_BASE, .irq = IRQ_TNETV107X_UART2, @@ -156,13 +166,28 @@ static struct plat_serial8250_port serial_data[] = { }, { .flags = 0, - }, + } }; -struct platform_device tnetv107x_serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev.platform_data = serial_data, + +struct platform_device tnetv107x_serial_device[] = { + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = serial0_platform_data, + }, + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev.platform_data = serial1_platform_data, + }, + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev.platform_data = serial2_platform_data, + }, + { + } }; static struct resource mmc0_resources[] = { @@ -385,7 +410,7 @@ void __init tnetv107x_devices_init(struct tnetv107x_device_info *info) platform_device_register(&tsc_device); if (info->serial_config) - davinci_serial_init(info->serial_config); + davinci_serial_init(tnetv107x_serial_device); for (i = 0; i < 2; i++) if (info->mmc_config[i]) { diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 86100d17969473112cbea30c4b3d3a1113420eee..3eaa5f6b2160593517463c2b18c211bbad93605e 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -357,9 +357,9 @@ static struct clk_lookup dm355_clks[] = { CLK(NULL, "clkout3", &clkout3_clk), CLK(NULL, "arm", &arm_clk), CLK(NULL, "mjcp", &mjcp_clk), - CLK(NULL, "uart0", &uart0_clk), - CLK(NULL, "uart1", &uart1_clk), - CLK(NULL, "uart2", &uart2_clk), + CLK("serial8250.0", NULL, &uart0_clk), + CLK("serial8250.1", NULL, &uart1_clk), + CLK("serial8250.2", NULL, &uart2_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), CLK("davinci-mcbsp.0", NULL, &asp0_clk), CLK("davinci-mcbsp.1", NULL, &asp1_clk), @@ -922,7 +922,7 @@ static struct davinci_timer_info dm355_timer_info = { .clocksource_id = T0_TOP, }; -static struct plat_serial8250_port dm355_serial_platform_data[] = { +static struct plat_serial8250_port dm355_serial0_platform_data[] = { { .mapbase = DAVINCI_UART0_BASE, .irq = IRQ_UARTINT0, @@ -931,6 +931,11 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = { .iotype = UPIO_MEM, .regshift = 2, }, + { + .flags = 0, + } +}; +static struct plat_serial8250_port dm355_serial1_platform_data[] = { { .mapbase = DAVINCI_UART1_BASE, .irq = IRQ_UARTINT1, @@ -939,6 +944,11 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = { .iotype = UPIO_MEM, .regshift = 2, }, + { + .flags = 0, + } +}; +static struct plat_serial8250_port dm355_serial2_platform_data[] = { { .mapbase = DM355_UART2_BASE, .irq = IRQ_DM355_UARTINT2, @@ -948,16 +958,34 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = { .regshift = 2, }, { - .flags = 0 - }, + .flags = 0, + } }; -static struct platform_device dm355_serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = dm355_serial_platform_data, +struct platform_device dm355_serial_device[] = { + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm355_serial0_platform_data, + } + }, + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = dm355_serial1_platform_data, + } }, + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = dm355_serial2_platform_data, + } + }, + { + } }; static struct davinci_soc_info davinci_soc_info_dm355 = { @@ -981,7 +1009,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .gpio_base = DAVINCI_GPIO_BASE, .gpio_num = 104, .gpio_irq = IRQ_DM355_GPIOBNK0, - .serial_dev = &dm355_serial_device, .sram_dma = 0x00010000, .sram_len = SZ_32K, }; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index dad28029ba9bee623ccbc0c29efb0a773453b388..c29e324eb0bb75012d227da960e96fd60c2141f9 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -455,8 +455,8 @@ static struct clk_lookup dm365_clks[] = { CLK("vpss", "master", &vpss_master_clk), CLK("vpss", "slave", &vpss_slave_clk), CLK(NULL, "arm", &arm_clk), - CLK(NULL, "uart0", &uart0_clk), - CLK(NULL, "uart1", &uart1_clk), + CLK("serial8250.0", NULL, &uart0_clk), + CLK("serial8250.1", NULL, &uart1_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), CLK("da830-mmc.0", NULL, &mmcsd0_clk), CLK("da830-mmc.1", NULL, &mmcsd1_clk), @@ -477,6 +477,7 @@ static struct clk_lookup dm365_clks[] = { CLK(NULL, "timer3", &timer3_clk), CLK(NULL, "usb", &usb_clk), CLK("davinci_emac.1", NULL, &emac_clk), + CLK("davinci_mdio.0", "fck", &emac_clk), CLK("davinci_voicecodec", NULL, &voicecodec_clk), CLK("davinci-mcbsp", NULL, &asp0_clk), CLK(NULL, "rto", &rto_clk), @@ -1041,7 +1042,7 @@ static struct davinci_timer_info dm365_timer_info = { #define DM365_UART1_BASE (IO_PHYS + 0x106000) -static struct plat_serial8250_port dm365_serial_platform_data[] = { +static struct plat_serial8250_port dm365_serial0_platform_data[] = { { .mapbase = DAVINCI_UART0_BASE, .irq = IRQ_UARTINT0, @@ -1050,6 +1051,11 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = { .iotype = UPIO_MEM, .regshift = 2, }, + { + .flags = 0, + } +}; +static struct plat_serial8250_port dm365_serial1_platform_data[] = { { .mapbase = DM365_UART1_BASE, .irq = IRQ_UARTINT1, @@ -1059,16 +1065,27 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = { .regshift = 2, }, { - .flags = 0 - }, + .flags = 0, + } }; -static struct platform_device dm365_serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = dm365_serial_platform_data, +struct platform_device dm365_serial_device[] = { + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm365_serial0_platform_data, + } + }, + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = dm365_serial1_platform_data, + } }, + { + } }; static struct davinci_soc_info davinci_soc_info_dm365 = { @@ -1093,7 +1110,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = { .gpio_num = 104, .gpio_irq = IRQ_DM365_GPIO0, .gpio_unbanked = 8, /* really 16 ... skip muxed GPIOs */ - .serial_dev = &dm365_serial_device, .emac_pdata = &dm365_emac_pdata, .sram_dma = 0x00010000, .sram_len = SZ_32K, @@ -1407,8 +1423,6 @@ static int __init dm365_init_devices(void) platform_device_register(&dm365_mdio_device); platform_device_register(&dm365_emac_device); - clk_add_alias(NULL, dev_name(&dm365_mdio_device.dev), - NULL, &dm365_emac_device.dev); return 0; } diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index a49d18246fe9f2e841b51d0ace2c16a4623bb069..4f74682293d6f162125ac176c54721e2260bf9d8 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -303,10 +303,11 @@ static struct clk_lookup dm644x_clks[] = { CLK("vpss", "master", &vpss_master_clk), CLK("vpss", "slave", &vpss_slave_clk), CLK(NULL, "arm", &arm_clk), - CLK(NULL, "uart0", &uart0_clk), - CLK(NULL, "uart1", &uart1_clk), - CLK(NULL, "uart2", &uart2_clk), + CLK("serial8250.0", NULL, &uart0_clk), + CLK("serial8250.1", NULL, &uart1_clk), + CLK("serial8250.2", NULL, &uart2_clk), CLK("davinci_emac.1", NULL, &emac_clk), + CLK("davinci_mdio.0", "fck", &emac_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), CLK("palm_bk3710", NULL, &ide_clk), CLK("davinci-mcbsp", NULL, &asp_clk), @@ -813,7 +814,7 @@ static struct davinci_timer_info dm644x_timer_info = { .clocksource_id = T0_TOP, }; -static struct plat_serial8250_port dm644x_serial_platform_data[] = { +static struct plat_serial8250_port dm644x_serial0_platform_data[] = { { .mapbase = DAVINCI_UART0_BASE, .irq = IRQ_UARTINT0, @@ -822,6 +823,11 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = { .iotype = UPIO_MEM, .regshift = 2, }, + { + .flags = 0, + } +}; +static struct plat_serial8250_port dm644x_serial1_platform_data[] = { { .mapbase = DAVINCI_UART1_BASE, .irq = IRQ_UARTINT1, @@ -830,6 +836,11 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = { .iotype = UPIO_MEM, .regshift = 2, }, + { + .flags = 0, + } +}; +static struct plat_serial8250_port dm644x_serial2_platform_data[] = { { .mapbase = DAVINCI_UART2_BASE, .irq = IRQ_UARTINT2, @@ -839,16 +850,34 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = { .regshift = 2, }, { - .flags = 0 - }, + .flags = 0, + } }; -static struct platform_device dm644x_serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = dm644x_serial_platform_data, +struct platform_device dm644x_serial_device[] = { + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm644x_serial0_platform_data, + } }, + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = dm644x_serial1_platform_data, + } + }, + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = dm644x_serial2_platform_data, + } + }, + { + } }; static struct davinci_soc_info davinci_soc_info_dm644x = { @@ -872,7 +901,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .gpio_base = DAVINCI_GPIO_BASE, .gpio_num = 71, .gpio_irq = IRQ_GPIOBNK0, - .serial_dev = &dm644x_serial_device, .emac_pdata = &dm644x_emac_pdata, .sram_dma = 0x00008000, .sram_len = SZ_16K, @@ -923,8 +951,6 @@ static int __init dm644x_init_devices(void) platform_device_register(&dm644x_mdio_device); platform_device_register(&dm644x_emac_device); - clk_add_alias(NULL, dev_name(&dm644x_mdio_device.dev), - NULL, &dm644x_emac_device.dev); return 0; } diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index d1259e80141b0d7b85bd95cedca24fdad3e98010..68f8d1f1aca1620d864307a28f449de956e287e6 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -342,15 +342,16 @@ static struct clk_lookup dm646x_clks[] = { CLK(NULL, "edma_tc1", &edma_tc1_clk), CLK(NULL, "edma_tc2", &edma_tc2_clk), CLK(NULL, "edma_tc3", &edma_tc3_clk), - CLK(NULL, "uart0", &uart0_clk), - CLK(NULL, "uart1", &uart1_clk), - CLK(NULL, "uart2", &uart2_clk), + CLK("serial8250.0", NULL, &uart0_clk), + CLK("serial8250.1", NULL, &uart1_clk), + CLK("serial8250.2", NULL, &uart2_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), CLK(NULL, "gpio", &gpio_clk), CLK("davinci-mcasp.0", NULL, &mcasp0_clk), CLK("davinci-mcasp.1", NULL, &mcasp1_clk), CLK(NULL, "aemif", &aemif_clk), CLK("davinci_emac.1", NULL, &emac_clk), + CLK("davinci_mdio.0", "fck", &emac_clk), CLK(NULL, "pwm0", &pwm0_clk), CLK(NULL, "pwm1", &pwm1_clk), CLK(NULL, "timer0", &timer0_clk), @@ -790,7 +791,7 @@ static struct davinci_timer_info dm646x_timer_info = { .clocksource_id = T0_TOP, }; -static struct plat_serial8250_port dm646x_serial_platform_data[] = { +static struct plat_serial8250_port dm646x_serial0_platform_data[] = { { .mapbase = DAVINCI_UART0_BASE, .irq = IRQ_UARTINT0, @@ -799,6 +800,11 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = { .iotype = UPIO_MEM32, .regshift = 2, }, + { + .flags = 0, + } +}; +static struct plat_serial8250_port dm646x_serial1_platform_data[] = { { .mapbase = DAVINCI_UART1_BASE, .irq = IRQ_UARTINT1, @@ -807,6 +813,11 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = { .iotype = UPIO_MEM32, .regshift = 2, }, + { + .flags = 0, + } +}; +static struct plat_serial8250_port dm646x_serial2_platform_data[] = { { .mapbase = DAVINCI_UART2_BASE, .irq = IRQ_DM646X_UARTINT2, @@ -816,16 +827,34 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = { .regshift = 2, }, { - .flags = 0 - }, + .flags = 0, + } }; -static struct platform_device dm646x_serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = dm646x_serial_platform_data, +struct platform_device dm646x_serial_device[] = { + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm646x_serial0_platform_data, + } + }, + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = dm646x_serial1_platform_data, + } }, + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = dm646x_serial2_platform_data, + } + }, + { + } }; static struct davinci_soc_info davinci_soc_info_dm646x = { @@ -849,7 +878,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .gpio_base = DAVINCI_GPIO_BASE, .gpio_num = 43, /* Only 33 usable */ .gpio_irq = IRQ_DM646X_GPIOBNK0, - .serial_dev = &dm646x_serial_device, .emac_pdata = &dm646x_emac_pdata, .sram_dma = 0x10010000, .sram_len = SZ_32K, @@ -913,8 +941,6 @@ static int __init dm646x_init_devices(void) platform_device_register(&dm646x_mdio_device); platform_device_register(&dm646x_emac_device); - clk_add_alias(NULL, dev_name(&dm646x_mdio_device.dev), - NULL, &dm646x_emac_device.dev); return 0; } diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index cce316b92c06c03ce2669938f49a5bd8a2e7b4a3..0b3c169758edb8c1f0b059b273fcc9439f65bc44 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -72,7 +72,6 @@ struct davinci_soc_info { unsigned gpio_unbanked; struct davinci_gpio_controller *gpio_ctlrs; int gpio_ctlrs_num; - struct platform_device *serial_dev; struct emac_platform_data *emac_pdata; dma_addr_t sram_dma; unsigned sram_len; diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 7b41a5e9bc3197bc0a1150050e65584f67cdd2d1..aae53072c0eb602d536c1a0891258625347fc0df 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -111,7 +111,7 @@ void da8xx_restart(enum reboot_mode mode, const char *cmd); void da8xx_rproc_reserve_cma(void); int da8xx_register_rproc(void); -extern struct platform_device da8xx_serial_device; +extern struct platform_device da8xx_serial_device[]; extern struct emac_platform_data da8xx_emac_pdata; extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata; extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata; diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S deleted file mode 100644 index b18b8ebc650881b4f45a10f8facb14cbb8984377..0000000000000000000000000000000000000000 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Debugging macro for DaVinci - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* Modifications - * Jan 2009 Chaithrika U S Added senduart, busyuart, waituart - * macros, based on debug-8250.S file - * but using 32-bit accesses required for - * some davinci devices. - */ - -#include - -#include - -#define UART_SHIFT 2 - -#if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0) -#define UART_BASE DAVINCI_UART0_BASE -#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1) -#define UART_BASE DA8XX_UART1_BASE -#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2) -#define UART_BASE DA8XX_UART2_BASE -#elif defined(CONFIG_DEBUG_DAVINCI_TNETV107X_UART1) -#define UART_BASE TNETV107X_UART2_BASE -#define UART_VIRTBASE TNETV107X_UART2_VIRT -#else -#error "Select a specifc port for DEBUG_LL" -#endif - -#ifndef UART_VIRTBASE -#define UART_VIRTBASE IO_ADDRESS(UART_BASE) -#endif - - .macro addruart, rp, rv, tmp - ldr \rp, =UART_BASE - ldr \rv, =UART_VIRTBASE - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - .macro waituart,rd,rx -#ifdef FLOW_CONTROL -1001: ldr \rd, [\rx, #UART_MSR << UART_SHIFT] - tst \rd, #UART_MSR_CTS - beq 1001b -#endif - .endm - diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 62ad300440f5e51a18ef84632c0a15b4570ec179..52b8571b2e702a2e33b689983ca6fcc8632469bb 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -15,6 +15,8 @@ #include +#include + #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) @@ -37,13 +39,7 @@ #define UART_DM646X_SCR_TX_WATERMARK 0x08 #ifndef __ASSEMBLY__ -struct davinci_uart_config { - /* Bit field of UARTs present; bit 0 --> UART0 */ - unsigned int enabled_uarts; -}; - -extern int davinci_serial_init(struct davinci_uart_config *); -extern int davinci_serial_setup_clk(unsigned instance, unsigned int *rate); +extern int davinci_serial_init(struct platform_device *); #endif #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h index 16314c64f7552005ccb71283206c1c363862744a..494fcf5ccfe1bbcc4fabaf927cbe1dfd2adec8e3 100644 --- a/arch/arm/mach-davinci/include/mach/tnetv107x.h +++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h @@ -42,7 +42,6 @@ #include struct tnetv107x_device_info { - struct davinci_uart_config *serial_config; struct davinci_mmc_config *mmc_config[2]; /* 2 controllers */ struct davinci_nand_pdata *nand_config[4]; /* 4 chipsels */ struct matrix_keypad_platform_data *keypad_config; @@ -50,7 +49,7 @@ struct tnetv107x_device_info { }; extern struct platform_device tnetv107x_wdt_device; -extern struct platform_device tnetv107x_serial_device; +extern struct platform_device tnetv107x_serial_device[]; extern void tnetv107x_init(void); extern void tnetv107x_devices_init(struct tnetv107x_device_info *); diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index f2625814c3c9b3160d5b163efbbd9cb799ced23e..5e93a734c858624c83e7306957d54f1583274bd2 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -70,49 +70,36 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p) UART_DM646X_SCR_TX_WATERMARK); } -/* Enable UART clock and obtain its rate */ -int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate) +int __init davinci_serial_init(struct platform_device *serial_dev) { - char name[16]; + int i, ret = 0; + struct device *dev; + struct plat_serial8250_port *p; struct clk *clk; - struct davinci_soc_info *soc_info = &davinci_soc_info; - struct device *dev = &soc_info->serial_dev->dev; - - sprintf(name, "uart%d", instance); - clk = clk_get(dev, name); - if (IS_ERR(clk)) { - pr_err("%s:%d: failed to get UART%d clock\n", - __func__, __LINE__, instance); - return PTR_ERR(clk); - } - - clk_prepare_enable(clk); - - if (rate) - *rate = clk_get_rate(clk); - - return 0; -} - -int __init davinci_serial_init(struct davinci_uart_config *info) -{ - int i, ret; - struct davinci_soc_info *soc_info = &davinci_soc_info; - struct device *dev = &soc_info->serial_dev->dev; - struct plat_serial8250_port *p = dev->platform_data; /* * Make sure the serial ports are muxed on at this point. * You have to mux them off in device drivers later on if not needed. */ - for (i = 0; p->flags; i++, p++) { - if (!(info->enabled_uarts & (1 << i))) - continue; + for (i = 0; serial_dev[i].dev.platform_data != NULL; i++) { + dev = &serial_dev[i].dev; + p = dev->platform_data; - ret = davinci_serial_setup_clk(i, &p->uartclk); + ret = platform_device_register(&serial_dev[i]); if (ret) continue; + clk = clk_get(dev, NULL); + if (IS_ERR(clk)) { + pr_err("%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, i); + continue; + } + + clk_prepare_enable(clk); + + p->uartclk = clk_get_rate(clk); + if (!p->membase && p->mapbase) { p->membase = ioremap(p->mapbase, SZ_4K); @@ -125,6 +112,5 @@ int __init davinci_serial_init(struct davinci_uart_config *info) if (p->membase && p->type != PORT_AR7) davinci_serial_reset(p); } - - return platform_device_register(soc_info->serial_dev); + return ret; } diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c index 4545667ecd3ced9716c08b0ad97157d509f733ea..f4d7fbb24b3b8416bc941960b01489e3dfb60c27 100644 --- a/arch/arm/mach-davinci/tnetv107x.c +++ b/arch/arm/mach-davinci/tnetv107x.c @@ -264,7 +264,7 @@ static struct clk_lookup clks[] = { CLK(NULL, "clk_chipcfg", &clk_chipcfg), CLK("tnetv107x-ts.0", NULL, &clk_tsc), CLK(NULL, "clk_rom", &clk_rom), - CLK(NULL, "uart2", &clk_uart2), + CLK("serial8250.2", NULL, &clk_uart2), CLK(NULL, "clk_pktsec", &clk_pktsec), CLK("tnetv107x-rng.0", NULL, &clk_rng), CLK("tnetv107x-pka.0", NULL, &clk_pka), @@ -274,8 +274,8 @@ static struct clk_lookup clks[] = { CLK(NULL, "clk_gpio", &clk_gpio), CLK(NULL, "clk_mdio", &clk_mdio), CLK("dm6441-mmc.0", NULL, &clk_sdio0), - CLK(NULL, "uart0", &clk_uart0), - CLK(NULL, "uart1", &clk_uart1), + CLK("serial8250.0", NULL, &clk_uart0), + CLK("serial8250.1", NULL, &clk_uart1), CLK(NULL, "timer0", &clk_timer0), CLK(NULL, "timer1", &clk_timer1), CLK("tnetv107x_wdt.0", NULL, &clk_wdt_arm), @@ -757,7 +757,7 @@ static struct davinci_soc_info tnetv107x_soc_info = { .gpio_type = GPIO_TYPE_TNETV107X, .gpio_num = TNETV107X_N_GPIO, .timer_info = &timer_info, - .serial_dev = &tnetv107x_serial_device, + .serial_dev = tnetv107x_serial_device, }; void __init tnetv107x_init(void) diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index dff7b2fd4e203cb14a74bb93f4da12eb7133a033..0bc7cdf8cf469d760ac384a4aa5ae46fa7605270 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -23,6 +23,8 @@ config MACH_CM_A510 config MACH_DOVE_DT bool "Marvell Dove Flattened Device Tree" select DOVE_CLK + select ORION_IRQCHIP + select ORION_TIMER select REGULATOR select REGULATOR_FIXED_VOLTAGE select USE_OF diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index 4d9d2ffc45358a5ca411f7b9dba7d9f06936a191..cbc5c06187883988e012a282d67e359d17b624c2 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -1,5 +1,5 @@ -obj-y += common.o irq.o -obj-$(CONFIG_DOVE_LEGACY) += mpp.o +obj-y += common.o +obj-$(CONFIG_DOVE_LEGACY) += irq.o mpp.o obj-$(CONFIG_PCI) += pcie.o obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o obj-$(CONFIG_MACH_DOVE_DT) += board-dt.o diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c index f3755ac81148761866df71104a0e356c2be72ed6..49f72a848423a62d3ff44943cfae84751aee09c0 100644 --- a/arch/arm/mach-dove/board-dt.c +++ b/arch/arm/mach-dove/board-dt.c @@ -10,11 +10,14 @@ #include #include +#include +#include #include #include #include #include #include +#include #include #include #include @@ -33,10 +36,6 @@ static void __init dove_legacy_clk_init(void) clkspec.np = np; clkspec.args_count = 1; - clkspec.args[0] = CLOCK_GATING_BIT_GBE; - orion_clkdev_add(NULL, "mv643xx_eth_port.0", - of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CLOCK_GATING_BIT_PCIE0; orion_clkdev_add("0", "pcie", of_clk_get_from_provider(&clkspec)); @@ -46,15 +45,18 @@ static void __init dove_legacy_clk_init(void) of_clk_get_from_provider(&clkspec)); } -static void __init dove_of_clk_init(void) +static void __init dove_dt_time_init(void) { of_clk_init(NULL); - dove_legacy_clk_init(); + clocksource_of_init(); } -static struct mv643xx_eth_platform_data dove_dt_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, -}; +static void __init dove_dt_init_early(void) +{ + mvebu_mbus_init("marvell,dove-mbus", + BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, + DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ); +} static void __init dove_dt_init(void) { @@ -65,11 +67,10 @@ static void __init dove_dt_init(void) #endif dove_setup_cpu_wins(); - /* Setup root of clk tree */ - dove_of_clk_init(); + /* Setup clocks for legacy devices */ + dove_legacy_clk_init(); /* Internal devices not ported to DT yet */ - dove_ge00_init(&dove_dt_ge00_data); dove_pcie_init(1, 1); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -82,9 +83,8 @@ static const char * const dove_dt_board_compat[] = { DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") .map_io = dove_map_io, - .init_early = dove_init_early, - .init_irq = orion_dt_init_irq, - .init_time = dove_timer_init, + .init_early = dove_dt_init_early, + .init_time = dove_dt_time_init, .init_machine = dove_dt_init, .restart = dove_restart, .dt_compat = dove_dt_board_compat, diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 00247c7713135a1f403eeaa9a0ea196895efaea3..c122bcff9f7c91647a3251266348bef2c531a12b 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -27,6 +27,22 @@ #include #include "common.h" +/* These can go away once Dove uses the mvebu-mbus DT binding */ +#define DOVE_MBUS_PCIE0_MEM_TARGET 0x4 +#define DOVE_MBUS_PCIE0_MEM_ATTR 0xe8 +#define DOVE_MBUS_PCIE0_IO_TARGET 0x4 +#define DOVE_MBUS_PCIE0_IO_ATTR 0xe0 +#define DOVE_MBUS_PCIE1_MEM_TARGET 0x8 +#define DOVE_MBUS_PCIE1_MEM_ATTR 0xe8 +#define DOVE_MBUS_PCIE1_IO_TARGET 0x8 +#define DOVE_MBUS_PCIE1_IO_ATTR 0xe0 +#define DOVE_MBUS_CESA_TARGET 0x3 +#define DOVE_MBUS_CESA_ATTR 0x1 +#define DOVE_MBUS_BOOTROM_TARGET 0x1 +#define DOVE_MBUS_BOOTROM_ATTR 0xfd +#define DOVE_MBUS_SCRATCHPAD_TARGET 0xd +#define DOVE_MBUS_SCRATCHPAD_ATTR 0x0 + /***************************************************************************** * I/O Address Mapping ****************************************************************************/ @@ -108,8 +124,8 @@ static void __init dove_clk_init(void) orion_clkdev_add(NULL, "sdhci-dove.1", sdio1); orion_clkdev_add(NULL, "orion_nand", nand); orion_clkdev_add(NULL, "cafe1000-ccic.0", camera); - orion_clkdev_add(NULL, "kirkwood-i2s.0", i2s0); - orion_clkdev_add(NULL, "kirkwood-i2s.1", i2s1); + orion_clkdev_add(NULL, "mvebu-audio.0", i2s0); + orion_clkdev_add(NULL, "mvebu-audio.1", i2s1); orion_clkdev_add(NULL, "mv_crypto", crypto); orion_clkdev_add(NULL, "dove-ac97", ac97); orion_clkdev_add(NULL, "dove-pdma", pdma); @@ -332,34 +348,40 @@ void __init dove_setup_cpu_wins(void) { /* * The PCIe windows will no longer be statically allocated - * here once Dove is migrated to the pci-mvebu driver. + * here once Dove is migrated to the pci-mvebu driver. The + * non-PCIe windows will no longer be created here once Dove + * fully moves to DT. */ - mvebu_mbus_add_window_remap_flags("pcie0.0", + mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE0_IO_TARGET, + DOVE_MBUS_PCIE0_IO_ATTR, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE, - DOVE_PCIE0_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pcie1.0", + DOVE_PCIE0_IO_BUS_BASE); + mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE1_IO_TARGET, + DOVE_MBUS_PCIE1_IO_ATTR, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE, - DOVE_PCIE1_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pcie0.0", - DOVE_PCIE0_MEM_PHYS_BASE, - DOVE_PCIE0_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); - mvebu_mbus_add_window_remap_flags("pcie1.0", - DOVE_PCIE1_MEM_PHYS_BASE, - DOVE_PCIE1_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); - mvebu_mbus_add_window("cesa", DOVE_CESA_PHYS_BASE, - DOVE_CESA_SIZE); - mvebu_mbus_add_window("bootrom", DOVE_BOOTROM_PHYS_BASE, - DOVE_BOOTROM_SIZE); - mvebu_mbus_add_window("scratchpad", DOVE_SCRATCHPAD_PHYS_BASE, - DOVE_SCRATCHPAD_SIZE); + DOVE_PCIE1_IO_BUS_BASE); + mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE0_MEM_TARGET, + DOVE_MBUS_PCIE0_MEM_ATTR, + DOVE_PCIE0_MEM_PHYS_BASE, + DOVE_PCIE0_MEM_SIZE); + mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE1_MEM_TARGET, + DOVE_MBUS_PCIE1_MEM_ATTR, + DOVE_PCIE1_MEM_PHYS_BASE, + DOVE_PCIE1_MEM_SIZE); + mvebu_mbus_add_window_by_id(DOVE_MBUS_CESA_TARGET, + DOVE_MBUS_CESA_ATTR, + DOVE_CESA_PHYS_BASE, + DOVE_CESA_SIZE); + mvebu_mbus_add_window_by_id(DOVE_MBUS_BOOTROM_TARGET, + DOVE_MBUS_BOOTROM_ATTR, + DOVE_BOOTROM_PHYS_BASE, + DOVE_BOOTROM_SIZE); + mvebu_mbus_add_window_by_id(DOVE_MBUS_SCRATCHPAD_TARGET, + DOVE_MBUS_SCRATCHPAD_ATTR, + DOVE_SCRATCHPAD_PHYS_BASE, + DOVE_SCRATCHPAD_SIZE); } void __init dove_init(void) diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S deleted file mode 100644 index 5929cbc59161c75b2880ce4ade87c6252d2e81c1..0000000000000000000000000000000000000000 --- a/arch/arm/mach-dove/include/mach/debug-macro.S +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - - .macro addruart, rp, rv, tmp - ldr \rp, =DOVE_SB_REGS_PHYS_BASE - ldr \rv, =DOVE_SB_REGS_VIRT_BASE - orr \rp, \rp, #0x00012000 - orr \rv, \rv, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c index 60bd729a1ba5c590a324855215ce549dcc93b086..8a433a51289c649d3424479863272f57e22f2862 100644 --- a/arch/arm/mach-dove/mpp.c +++ b/arch/arm/mach-dove/mpp.c @@ -47,7 +47,7 @@ static const struct dove_mpp_grp dove_mpp_grp[] = { /* Enable gpio for a range of pins. mode should be a combination of GPIO_OUTPUT_OK | GPIO_INPUT_OK */ -static void dove_mpp_gpio_mode(int start, int end, int gpio_mode) +static void __init dove_mpp_gpio_mode(int start, int end, int gpio_mode) { int i; diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S deleted file mode 100644 index bb02c05e68128d58c5099f937734e097dfc20174..0000000000000000000000000000000000000000 --- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* arch/arm/mach-ebsa110/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -**/ - - .macro addruart, rp, rv, tmp - mov \rp, #0xf0000000 - orr \rp, \rp, #0x00000be0 - mov \rp, \rv - .endm - -#define UART_SHIFT 2 -#define FLOW_CONTROL -#include diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index fe3c1fa5462b72d0d44c5700ade01a816a696542..93e54fd4e3d55900192f62e573d6d97a2919aa4b 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -194,20 +194,6 @@ config MACH_VISION_EP9307 Say 'Y' here if you want your kernel to support the Vision Engraving Systems EP9307 SoM. -choice - prompt "Select a UART for early kernel messages" - -config EP93XX_EARLY_UART1 - bool "UART1" - -config EP93XX_EARLY_UART2 - bool "UART2" - -config EP93XX_EARLY_UART3 - bool "UART3" - -endchoice - endmenu endif diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S deleted file mode 100644 index af54e43132cf2743b9736fadafc827a26844aac1..0000000000000000000000000000000000000000 --- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/debug-macro.S - * Debugging macro include header - * - * Copyright (C) 2006 Lennert Buytenhek - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ -#include - - .macro addruart, rp, rv, tmp - ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base - ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base - orr \rp, \rp, #0x000c0000 - orr \rv, \rv, #0x000c0000 - .endm - -#include diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index b5cc77d2380bd59c24c2da80a9995d45c2277f85..03c42e5400d2e70e75b7986b04d4a2eb8f387cab 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -31,18 +31,8 @@ static void __raw_writel(unsigned int value, unsigned int ptr) *((volatile unsigned int *)ptr) = value; } -#if defined(CONFIG_EP93XX_EARLY_UART1) -#define UART_BASE EP93XX_UART1_PHYS_BASE -#elif defined(CONFIG_EP93XX_EARLY_UART2) -#define UART_BASE EP93XX_UART2_PHYS_BASE -#elif defined(CONFIG_EP93XX_EARLY_UART3) -#define UART_BASE EP93XX_UART3_PHYS_BASE -#else -#define UART_BASE EP93XX_UART1_PHYS_BASE -#endif - -#define PHYS_UART_DATA (UART_BASE + 0x00) -#define PHYS_UART_FLAG (UART_BASE + 0x18) +#define PHYS_UART_DATA (CONFIG_DEBUG_UART_PHYS + 0x00) +#define PHYS_UART_FLAG (CONFIG_DEBUG_UART_PHYS + 0x18) #define UART_FLAG_TXFF 0x20 static inline void putc(int c) diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 605956fd07a2bdc7e133f07b7e8000b333fd566b..64f2e50e19ca10d9ae7a7105c72e66011f1a2f6d 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 972490fc09d627241a1d3c63e7d234693b4f03d8..8646a141ae467b8175aed00d0acf39ae73f02097 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -17,7 +17,6 @@ void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1); void exynos_init_time(void); -extern unsigned long xxti_f, xusbxti_f; struct map_desc; void exynos_init_io(void); @@ -25,56 +24,14 @@ void exynos4_restart(enum reboot_mode mode, const char *cmd); void exynos5_restart(enum reboot_mode mode, const char *cmd); void exynos_init_late(void); -/* ToDo: remove these after migrating legacy exynos4 platforms to dt */ -void exynos4_clk_init(struct device_node *np, int is_exynos4210, void __iomem *reg_base, unsigned long xom); -void exynos4_clk_register_fixed_ext(unsigned long, unsigned long); - void exynos_firmware_init(void); -void exynos_set_timer_source(u8 channels); - #ifdef CONFIG_PM_GENERIC_DOMAINS int exynos_pm_late_initcall(void); #else static inline int exynos_pm_late_initcall(void) { return 0; } #endif -#ifdef CONFIG_ARCH_EXYNOS4 -void exynos4_register_clocks(void); -void exynos4_setup_clocks(void); - -#else -#define exynos4_register_clocks() -#define exynos4_setup_clocks() -#endif - -#ifdef CONFIG_ARCH_EXYNOS5 -void exynos5_register_clocks(void); -void exynos5_setup_clocks(void); - -#else -#define exynos5_register_clocks() -#define exynos5_setup_clocks() -#endif - -#ifdef CONFIG_CPU_EXYNOS4210 -void exynos4210_register_clocks(void); - -#else -#define exynos4210_register_clocks() -#endif - -#ifdef CONFIG_SOC_EXYNOS4212 -void exynos4212_register_clocks(void); - -#else -#define exynos4212_register_clocks() -#endif - -struct device_node; -void combiner_init(void __iomem *combiner_base, struct device_node *np, - unsigned int max_nr, int irq_base); - extern struct smp_operations exynos_smp_ops; extern void exynos_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index c169f0c99b2a323ad2f88ff0f9d20fac4579a064..02247f313e944237151e9fe656d68b4f8114ea7e 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -13,20 +13,6 @@ #include -#ifndef CONFIG_DEBUG_DC21285_PORT - /* For NetWinder debugging */ - .macro addruart, rp, rv, tmp - mov \rp, #0x000003f8 - orr \rv, \rp, #0xfe000000 @ virtual - orr \rv, \rv, #0x00e00000 @ virtual - orr \rp, \rp, #0x7c000000 @ physical - .endm - -#define UART_SHIFT 0 -#define FLOW_CONTROL -#include - -#else #include /* For EBSA285 debugging */ .equ dc21285_high, ARMCSR_BASE & 0xff000000 @@ -54,4 +40,3 @@ .macro waituart,rd,rx .endm -#endif diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S deleted file mode 100644 index 837670763b85347b2b37d6050fa6206ba9c7cd69..0000000000000000000000000000000000000000 --- a/arch/arm/mach-gemini/include/mach/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Copyright (C) 2001-2006 Storlink, Corp. - * Copyright (C) 2008-2009 Paulius Zaleckas - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - - .macro addruart, rp, rv, tmp - ldr \rp, =GEMINI_UART_BASE @ physical - ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual - .endm - -#define UART_SHIFT 2 -#define FLOW_CONTROL -#include diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index cd9fcb1cd7ab3ac1472704c375b0ef31717b25bc..6acbdabf62226d01063f8468e883c38dc50c8f80 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -12,7 +12,7 @@ config ARCH_HIGHBANK select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU - select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_ARM_TWD if SMP select HAVE_SMP select MAILBOX select PL320_MBOX diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index f54656091a9d67dfe896e00ad909ad73d0674570..29a8af6922a87eeb445eacc6971c3aaa15f6bcf9 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,6 +1,7 @@ config ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 select ARCH_REQUIRE_GPIOLIB + select ARM_CPU_SUSPEND if PM select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR if !ZBOOT_ROM select CLKDEV_LOOKUP @@ -8,6 +9,7 @@ config ARCH_MXC select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP + select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF @@ -785,7 +787,6 @@ config SOC_IMX6Q bool "i.MX6 Quad/DualLite support" select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP - select ARM_CPU_SUSPEND if PM select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 @@ -793,7 +794,7 @@ config SOC_IMX6Q select COMMON_CLK select CPU_V7 select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_ARM_TWD if SMP select HAVE_IMX_ANATOP select HAVE_IMX_GPC select HAVE_IMX_MMDC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index e20f22d58fd8f00618dd57732e5e9a17a25d88c3..5383c589ad719105d104c077bac14ff73e1933eb 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -15,7 +15,8 @@ imx5-pm-$(CONFIG_PM) += pm-imx5.o obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ - clk-pfd.o clk-busy.o clk.o + clk-pfd.o clk-busy.o clk.o \ + clk-fixup-div.o clk-fixup-mux.o obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 0cfa07dd9aa422aa6a5cb1b245dd3a07c4d4498d..ad3b755abb78a949d1b379757a11725a983f2d3b 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -66,7 +66,7 @@ void imx_anatop_post_resume(void) imx_anatop_enable_weak2p5(false); } -void imx_anatop_usb_chrg_detect_disable(void) +static void imx_anatop_usb_chrg_detect_disable(void) { regmap_write(anatop, ANADIG_USB1_CHRG_DETECT, BM_ANADIG_USB_CHRG_DETECT_EN_B @@ -100,4 +100,6 @@ void __init imx_anatop_init(void) pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__); return; } + + imx_anatop_usb_chrg_detect_disable(); } diff --git a/arch/arm/mach-imx/clk-fixup-div.c b/arch/arm/mach-imx/clk-fixup-div.c new file mode 100644 index 0000000000000000000000000000000000000000..21db020b1f2dccee6b7646ac4cd0a4f6e8308e7d --- /dev/null +++ b/arch/arm/mach-imx/clk-fixup-div.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include "clk.h" + +#define to_clk_div(_hw) container_of(_hw, struct clk_divider, hw) +#define div_mask(d) ((1 << (d->width)) - 1) + +/** + * struct clk_fixup_div - imx integer fixup divider clock + * @divider: the parent class + * @ops: pointer to clk_ops of parent class + * @fixup: a hook to fixup the write value + * + * The imx fixup divider clock is a subclass of basic clk_divider + * with an addtional fixup hook. + */ +struct clk_fixup_div { + struct clk_divider divider; + const struct clk_ops *ops; + void (*fixup)(u32 *val); +}; + +static inline struct clk_fixup_div *to_clk_fixup_div(struct clk_hw *hw) +{ + struct clk_divider *divider = to_clk_div(hw); + + return container_of(divider, struct clk_fixup_div, divider); +} + +static unsigned long clk_fixup_div_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw); + + return fixup_div->ops->recalc_rate(&fixup_div->divider.hw, parent_rate); +} + +static long clk_fixup_div_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw); + + return fixup_div->ops->round_rate(&fixup_div->divider.hw, rate, prate); +} + +static int clk_fixup_div_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw); + struct clk_divider *div = to_clk_div(hw); + unsigned int divider, value; + unsigned long flags = 0; + u32 val; + + divider = parent_rate / rate; + + /* Zero based divider */ + value = divider - 1; + + if (value > div_mask(div)) + value = div_mask(div); + + spin_lock_irqsave(div->lock, flags); + + val = readl(div->reg); + val &= ~(div_mask(div) << div->shift); + val |= value << div->shift; + fixup_div->fixup(&val); + writel(val, div->reg); + + spin_unlock_irqrestore(div->lock, flags); + + return 0; +} + +static const struct clk_ops clk_fixup_div_ops = { + .recalc_rate = clk_fixup_div_recalc_rate, + .round_rate = clk_fixup_div_round_rate, + .set_rate = clk_fixup_div_set_rate, +}; + +struct clk *imx_clk_fixup_divider(const char *name, const char *parent, + void __iomem *reg, u8 shift, u8 width, + void (*fixup)(u32 *val)) +{ + struct clk_fixup_div *fixup_div; + struct clk *clk; + struct clk_init_data init; + + if (!fixup) + return ERR_PTR(-EINVAL); + + fixup_div = kzalloc(sizeof(*fixup_div), GFP_KERNEL); + if (!fixup_div) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &clk_fixup_div_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent ? &parent : NULL; + init.num_parents = parent ? 1 : 0; + + fixup_div->divider.reg = reg; + fixup_div->divider.shift = shift; + fixup_div->divider.width = width; + fixup_div->divider.lock = &imx_ccm_lock; + fixup_div->divider.hw.init = &init; + fixup_div->ops = &clk_divider_ops; + fixup_div->fixup = fixup; + + clk = clk_register(NULL, &fixup_div->divider.hw); + if (IS_ERR(clk)) + kfree(fixup_div); + + return clk; +} diff --git a/arch/arm/mach-imx/clk-fixup-mux.c b/arch/arm/mach-imx/clk-fixup-mux.c new file mode 100644 index 0000000000000000000000000000000000000000..deb4b8093b30487821b5e43663adc594ae763958 --- /dev/null +++ b/arch/arm/mach-imx/clk-fixup-mux.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include "clk.h" + +#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw) + +/** + * struct clk_fixup_mux - imx integer fixup multiplexer clock + * @mux: the parent class + * @ops: pointer to clk_ops of parent class + * @fixup: a hook to fixup the write value + * + * The imx fixup multiplexer clock is a subclass of basic clk_mux + * with an addtional fixup hook. + */ +struct clk_fixup_mux { + struct clk_mux mux; + const struct clk_ops *ops; + void (*fixup)(u32 *val); +}; + +static inline struct clk_fixup_mux *to_clk_fixup_mux(struct clk_hw *hw) +{ + struct clk_mux *mux = to_clk_mux(hw); + + return container_of(mux, struct clk_fixup_mux, mux); +} + +static u8 clk_fixup_mux_get_parent(struct clk_hw *hw) +{ + struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw); + + return fixup_mux->ops->get_parent(&fixup_mux->mux.hw); +} + +static int clk_fixup_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw); + struct clk_mux *mux = to_clk_mux(hw); + unsigned long flags = 0; + u32 val; + + spin_lock_irqsave(mux->lock, flags); + + val = readl(mux->reg); + val &= ~(mux->mask << mux->shift); + val |= index << mux->shift; + fixup_mux->fixup(&val); + writel(val, mux->reg); + + spin_unlock_irqrestore(mux->lock, flags); + + return 0; +} + +static const struct clk_ops clk_fixup_mux_ops = { + .get_parent = clk_fixup_mux_get_parent, + .set_parent = clk_fixup_mux_set_parent, +}; + +struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg, + u8 shift, u8 width, const char **parents, + int num_parents, void (*fixup)(u32 *val)) +{ + struct clk_fixup_mux *fixup_mux; + struct clk *clk; + struct clk_init_data init; + + if (!fixup) + return ERR_PTR(-EINVAL); + + fixup_mux = kzalloc(sizeof(*fixup_mux), GFP_KERNEL); + if (!fixup_mux) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &clk_fixup_mux_ops; + init.parent_names = parents; + init.num_parents = num_parents; + + fixup_mux->mux.reg = reg; + fixup_mux->mux.shift = shift; + fixup_mux->mux.mask = BIT(width) - 1; + fixup_mux->mux.lock = &imx_ccm_lock; + fixup_mux->mux.hw.init = &init; + fixup_mux->ops = &clk_mux_ops; + fixup_mux->fixup = fixup; + + clk = clk_register(NULL, &fixup_mux->mux.hw); + if (IS_ERR(clk)) + kfree(fixup_mux); + + return clk; +} diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 9afac26fa1ccb13874271061c3754e3b952574d5..1a56a33199976ed66907a80bce0336a03f40dcf2 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -119,7 +119,7 @@ enum imx5_clks { srtc_gate, pata_gate, sata_gate, spdif_xtal_sel, spdif0_sel, spdif1_sel, spdif0_pred, spdif0_podf, spdif1_pred, spdif1_podf, spdif0_com_s, spdif1_com_sel, spdif0_gate, spdif1_gate, spdif_ipg_gate, - clk_max + ocram, clk_max }; static struct clk *clk[clk_max]; @@ -506,6 +506,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, mx53_can_sel, ARRAY_SIZE(mx53_can_sel)); clk[can1_serial_gate] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22); clk[can1_ipg_gate] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20); + clk[ocram] = imx_clk_gate2("ocram", "ahb", MXC_CCM_CCGR6, 2); clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8); clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6); clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 86567d980b0743df9eadf44bfac489bc01634b9d..9181a241d3a8e543c41a2433b38cbfa6b774de02 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -206,6 +206,17 @@ static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", }; +static const char *cko2_sels[] = { + "mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1", + "gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi", + "usdhc3", "dummy", "arm", "ipu1", + "ipu2", "vdo_axi", "osc", "gpu2d_core", + "gpu3d_core", "usdhc2", "ssi1", "ssi2", + "ssi3", "gpu3d_shader", "vpu_axi", "can_root", + "ldb_di0", "ldb_di1", "esai", "eim_slow", + "uart_serial", "spdif", "asrc", "hsi_tx", +}; +static const char *cko_sels[] = { "cko1", "cko2", }; enum mx6q_clks { dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m, @@ -239,7 +250,8 @@ enum mx6q_clks { pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg, ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, - usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, clk_max + usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, + spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, clk_max }; static struct clk *clk[clk_max]; @@ -276,6 +288,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) struct device_node *np; void __iomem *base; int i, irq; + int ret; clk[dummy] = imx_clk_fixed("dummy", 0); clk[ckil] = imx_obtain_fixed_clock("ckil", 0); @@ -384,19 +397,21 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[ipu2_di1_sel] = imx_clk_mux("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels)); clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels)); clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels)); - clk[ssi1_sel] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); - clk[ssi2_sel] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); - clk[ssi3_sel] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); - clk[usdhc1_sel] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); - clk[usdhc2_sel] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); - clk[usdhc3_sel] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); - clk[usdhc4_sel] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clk[ssi1_sel] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); + clk[ssi2_sel] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); + clk[ssi3_sel] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); + clk[usdhc1_sel] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); + clk[usdhc2_sel] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); + clk[usdhc3_sel] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); + clk[usdhc4_sel] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels)); - clk[emi_sel] = imx_clk_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels)); - clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels)); + clk[emi_sel] = imx_clk_fixup_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels), imx_cscmr1_fixup); + clk[emi_slow_sel] = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels), imx_cscmr1_fixup); clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels)); clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels)); clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels)); + clk[cko2_sel] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels)); + clk[cko] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels)); /* name reg shift width busy: reg, shift parent_names num_parents */ clk[periph] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); @@ -406,7 +421,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[periph_clk2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3); clk[periph2_clk2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3); clk[ipg] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); - clk[ipg_per] = imx_clk_divider("ipg_per", "ipg", base + 0x1c, 0, 6); + clk[ipg_per] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup); clk[esai_pred] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3); clk[esai_podf] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3); clk[asrc_pred] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3); @@ -442,10 +457,11 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[usdhc4_podf] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); clk[enfc_pred] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3); clk[enfc_podf] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6); - clk[emi_podf] = imx_clk_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3); - clk[emi_slow_podf] = imx_clk_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3); + clk[emi_podf] = imx_clk_fixup_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup); + clk[emi_slow_podf] = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup); clk[vpu_axi_podf] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3); clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3); + clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3); /* name parent_name reg shift width busy: reg, shift */ clk[axi] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0); @@ -486,6 +502,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[i2c3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10); clk[iim] = imx_clk_gate2("iim", "ipg", base + 0x70, 12); clk[enfc] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14); + clk[vdoa] = imx_clk_gate2("vdoa", "vdo_axi", base + 0x70, 26); clk[ipu1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0); clk[ipu1_di0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2); clk[ipu1_di1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4); @@ -521,6 +538,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4); clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); + clk[spdif] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14); clk[ssi1_ipg] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18); clk[ssi2_ipg] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20); clk[ssi3_ipg] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22); @@ -535,6 +553,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[vdo_axi] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12); clk[vpu_axi] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14); clk[cko1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7); + clk[cko2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24); for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) @@ -554,7 +573,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL); clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL); - if (imx6q_revision() != IMX_CHIP_REVISION_1_0) { + if ((imx6q_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) { clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]); clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]); } @@ -574,6 +593,16 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk_prepare_enable(clk[usbphy2_gate]); } + /* + * Let's initially set up CLKO with OSC24M, since this configuration + * is widely used by imx6q board designs to clock audio codec. + */ + ret = clk_set_parent(clk[cko2_sel], clk[osc]); + if (!ret) + ret = clk_set_parent(clk[cko], clk[cko2]); + if (ret) + pr_warn("failed to set up CLKO: %d\n", ret); + /* Set initial power mode */ imx6q_set_lpm(WAIT_CLOCKED); diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index a307ac22dffe6244276538e84c33f282b4a2a25c..a5c3c5d21aeedbcb324bca659730948f3e8d1a36 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -138,14 +138,14 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) clks[IMX6SL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels)); clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels)); - clks[IMX6SL_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); - clks[IMX6SL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); - clks[IMX6SL_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); - clks[IMX6SL_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); - clks[IMX6SL_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); - clks[IMX6SL_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); - clks[IMX6SL_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); - clks[IMX6SL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); + clks[IMX6SL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); + clks[IMX6SL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); + clks[IMX6SL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); + clks[IMX6SL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); + clks[IMX6SL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); + clks[IMX6SL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); + clks[IMX6SL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); + clks[IMX6SL_CLK_PERCLK_SEL] = imx_clk_fixup_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels), imx_cscmr1_fixup); clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels)); clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels)); clks[IMX6SL_CLK_GPU2D_OVG_SEL] = imx_clk_mux("gpu2d_ovg_sel", base + 0x18, 4, 2, gpu2d_ovg_sels, ARRAY_SIZE(gpu2d_ovg_sels)); @@ -179,14 +179,14 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) clks[IMX6SL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); clks[IMX6SL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); clks[IMX6SL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); - clks[IMX6SL_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6); + clks[IMX6SL_CLK_PERCLK] = imx_clk_fixup_divider("perclk", "perclk_sel", base + 0x1c, 0, 6, imx_cscmr1_fixup); clks[IMX6SL_CLK_PXP_AXI_PODF] = imx_clk_divider("pxp_axi_podf", "pxp_axi_sel", base + 0x34, 3, 3); clks[IMX6SL_CLK_EPDC_AXI_PODF] = imx_clk_divider("epdc_axi_podf", "epdc_axi_sel", base + 0x34, 12, 3); clks[IMX6SL_CLK_GPU2D_OVG_PODF] = imx_clk_divider("gpu2d_ovg_podf", "gpu2d_ovg_sel", base + 0x18, 26, 3); clks[IMX6SL_CLK_GPU2D_PODF] = imx_clk_divider("gpu2d_podf", "gpu2d_sel", base + 0x18, 29, 3); clks[IMX6SL_CLK_LCDIF_PIX_PRED] = imx_clk_divider("lcdif_pix_pred", "lcdif_pix_sel", base + 0x38, 3, 3); clks[IMX6SL_CLK_EPDC_PIX_PRED] = imx_clk_divider("epdc_pix_pred", "epdc_pix_sel", base + 0x38, 12, 3); - clks[IMX6SL_CLK_LCDIF_PIX_PODF] = imx_clk_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3); + clks[IMX6SL_CLK_LCDIF_PIX_PODF] = imx_clk_fixup_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3, imx_cscmr1_fixup); clks[IMX6SL_CLK_EPDC_PIX_PODF] = imx_clk_divider("epdc_pix_podf", "epdc_pix_pred", base + 0x18, 23, 3); clks[IMX6SL_CLK_SPDIF0_PRED] = imx_clk_divider("spdif0_pred", "spdif0_sel", base + 0x30, 25, 3); clks[IMX6SL_CLK_SPDIF0_PODF] = imx_clk_divider("spdif0_podf", "spdif0_pred", base + 0x30, 22, 3); diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c index a9fad5f8d340b50fb50e2348a6e761623be50911..f6640b6a7b3128a7ca6a6d8d31578419ea1be431 100644 --- a/arch/arm/mach-imx/clk-pllv3.c +++ b/arch/arm/mach-imx/clk-pllv3.c @@ -48,7 +48,7 @@ struct clk_pllv3 { static int clk_pllv3_prepare(struct clk_hw *hw) { struct clk_pllv3 *pll = to_clk_pllv3(hw); - unsigned long timeout = jiffies + msecs_to_jiffies(10); + unsigned long timeout; u32 val; val = readl_relaxed(pll->base); @@ -59,12 +59,19 @@ static int clk_pllv3_prepare(struct clk_hw *hw) val &= ~BM_PLL_POWER; writel_relaxed(val, pll->base); + timeout = jiffies + msecs_to_jiffies(10); /* Wait for PLL to lock */ - while (!(readl_relaxed(pll->base) & BM_PLL_LOCK)) + do { + if (readl_relaxed(pll->base) & BM_PLL_LOCK) + break; if (time_after(jiffies, timeout)) - return -ETIMEDOUT; + break; + } while (1); - return 0; + if (readl_relaxed(pll->base) & BM_PLL_LOCK) + return 0; + else + return -ETIMEDOUT; } static void clk_pllv3_unprepare(struct clk_hw *hw) diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c index 55bc80a00666412b8d7c53daaba26dced5e2eb95..edc35df7bed4a0da6d72dde245ca9257fc296805 100644 --- a/arch/arm/mach-imx/clk.c +++ b/arch/arm/mach-imx/clk.c @@ -37,3 +37,29 @@ struct clk * __init imx_obtain_fixed_clock( clk = imx_clk_fixed(name, rate); return clk; } + +/* + * This fixups the register CCM_CSCMR1 write value. + * The write/read/divider values of the aclk_podf field + * of that register have the relationship described by + * the following table: + * + * write value read value divider + * 3b'000 3b'110 7 + * 3b'001 3b'111 8 + * 3b'010 3b'100 5 + * 3b'011 3b'101 6 + * 3b'100 3b'010 3 + * 3b'101 3b'011 4 + * 3b'110 3b'000 1 + * 3b'111 3b'001 2(default) + * + * That's why we do the xor operation below. + */ +#define CSCMR1_FIXUP 0x00600000 + +void imx_cscmr1_fixup(u32 *val) +{ + *val ^= CSCMR1_FIXUP; + return; +} diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 0e4e8bb261b945c1fb22d32b9e693592f17dfa41..3451f1f8ba1ffbbde02f11984158ae09b8d4e1c6 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -6,6 +6,8 @@ extern spinlock_t imx_ccm_lock; +extern void imx_cscmr1_fixup(u32 *val); + struct clk *imx_clk_pllv1(const char *name, const char *parent, void __iomem *base); @@ -49,6 +51,14 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift, u8 width, void __iomem *busy_reg, u8 busy_shift, const char **parent_names, int num_parents); +struct clk *imx_clk_fixup_divider(const char *name, const char *parent, + void __iomem *reg, u8 shift, u8 width, + void (*fixup)(u32 *val)); + +struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg, + u8 shift, u8 width, const char **parents, + int num_parents, void (*fixup)(u32 *val)); + static inline struct clk *imx_clk_fixed(const char *name, int rate) { return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index cb6c838b63edad7841ade9fcad0eb5ec82ebc51a..4517fd760bfc6d0c55a160f7fa22f8f3e1ae778c 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -137,7 +137,6 @@ extern void imx_gpc_restore_all(void); extern void imx_anatop_init(void); extern void imx_anatop_pre_suspend(void); extern void imx_anatop_post_resume(void); -extern void imx_anatop_usb_chrg_detect_disable(void); extern u32 imx_anatop_get_digprog(void); extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_set_chicken_bit(void); @@ -147,12 +146,10 @@ extern int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_PM extern void imx6q_pm_init(void); -extern void imx51_pm_init(void); -extern void imx53_pm_init(void); +extern void imx5_pm_init(void); #else static inline void imx6q_pm_init(void) {} -static inline void imx51_pm_init(void) {} -static inline void imx53_pm_init(void) {} +static inline void imx5_pm_init(void) {} #endif #ifdef CONFIG_NEON @@ -161,6 +158,12 @@ extern int mx51_neon_fixup(void); static inline int mx51_neon_fixup(void) { return 0; } #endif +#ifdef CONFIG_CACHE_L2X0 +extern void imx_init_l2cache(void); +#else +static inline void imx_init_l2cache(void) {} +#endif + extern struct smp_operations imx_smp_ops; #endif diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 29ac8ee651d210c86b6245c7a7235f385a56ab0e..97f9c6297fcf4faf92bd7039cf53395978316cc6 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 7be13f8e69a01f22b43d28b4b22a42a23f006c8d..85a1b51346c8db12845d3123dd7758af034e3357 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include #include @@ -103,87 +103,77 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ - phy_write(phydev, 0x0b, 0x8105); - phy_write(phydev, 0x0c, 0x0000); + phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL, + 0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW); + phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000); /* max rx/tx clock delay, min rx/tx control delay */ - phy_write(phydev, 0x0b, 0x8104); - phy_write(phydev, 0x0c, 0xf0f0); - phy_write(phydev, 0x0b, 0x104); + phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL, + 0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW); + phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0); + phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL, + MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW); } return 0; } -static void __init imx6q_sabrelite_cko1_setup(void) +static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val) { - struct clk *cko1_sel, *ahb, *cko1; - unsigned long rate; - - cko1_sel = clk_get_sys(NULL, "cko1_sel"); - ahb = clk_get_sys(NULL, "ahb"); - cko1 = clk_get_sys(NULL, "cko1"); - if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) { - pr_err("cko1 setup failed!\n"); - goto put_clk; - } - clk_set_parent(cko1_sel, ahb); - rate = clk_round_rate(cko1, 16000000); - clk_set_rate(cko1, rate); -put_clk: - if (!IS_ERR(cko1_sel)) - clk_put(cko1_sel); - if (!IS_ERR(ahb)) - clk_put(ahb); - if (!IS_ERR(cko1)) - clk_put(cko1); + phy_write(dev, 0x0d, device); + phy_write(dev, 0x0e, reg); + phy_write(dev, 0x0d, (1 << 14) | device); + phy_write(dev, 0x0e, val); } -static void __init imx6q_sabrelite_init(void) +static int ksz9031rn_phy_fixup(struct phy_device *dev) { - if (IS_BUILTIN(CONFIG_PHYLIB)) - phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, - ksz9021rn_phy_fixup); - imx6q_sabrelite_cko1_setup(); + /* + * min rx data delay, max rx/tx clock delay, + * min rx/tx control delay + */ + mmd_write_reg(dev, 2, 4, 0); + mmd_write_reg(dev, 2, 5, 0); + mmd_write_reg(dev, 2, 8, 0x003ff); + + return 0; } -static void __init imx6q_sabresd_cko1_setup(void) +static int ar8031_phy_fixup(struct phy_device *dev) { - struct clk *cko1_sel, *pll4, *pll4_post, *cko1; - unsigned long rate; - - cko1_sel = clk_get_sys(NULL, "cko1_sel"); - pll4 = clk_get_sys(NULL, "pll4_audio"); - pll4_post = clk_get_sys(NULL, "pll4_post_div"); - cko1 = clk_get_sys(NULL, "cko1"); - if (IS_ERR(cko1_sel) || IS_ERR(pll4) - || IS_ERR(pll4_post) || IS_ERR(cko1)) { - pr_err("cko1 setup failed!\n"); - goto put_clk; - } - /* - * Setting pll4 at 768MHz (24MHz * 32) - * So its child clock can get 24MHz easily - */ - clk_set_rate(pll4, 768000000); - - clk_set_parent(cko1_sel, pll4_post); - rate = clk_round_rate(cko1, 24000000); - clk_set_rate(cko1, rate); -put_clk: - if (!IS_ERR(cko1_sel)) - clk_put(cko1_sel); - if (!IS_ERR(pll4_post)) - clk_put(pll4_post); - if (!IS_ERR(pll4)) - clk_put(pll4); - if (!IS_ERR(cko1)) - clk_put(cko1); + u16 val; + + /* To enable AR8031 output a 125MHz clk from CLK_25M */ + phy_write(dev, 0xd, 0x7); + phy_write(dev, 0xe, 0x8016); + phy_write(dev, 0xd, 0x4007); + + val = phy_read(dev, 0xe); + val &= 0xffe3; + val |= 0x18; + phy_write(dev, 0xe, val); + + /* introduce tx clock delay */ + phy_write(dev, 0x1d, 0x5); + val = phy_read(dev, 0x1e); + val |= 0x0100; + phy_write(dev, 0x1e, val); + + return 0; } -static void __init imx6q_sabresd_init(void) +#define PHY_ID_AR8031 0x004dd074 + +static void __init imx6q_enet_phy_init(void) { - imx6q_sabresd_cko1_setup(); + if (IS_BUILTIN(CONFIG_PHYLIB)) { + phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, + ksz9021rn_phy_fixup); + phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK, + ksz9031rn_phy_fixup); + phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff, + ar8031_phy_fixup); + } } static void __init imx6q_1588_init(void) @@ -192,29 +182,22 @@ static void __init imx6q_1588_init(void) gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); if (!IS_ERR(gpr)) - regmap_update_bits(gpr, 0x4, 1 << 21, 1 << 21); + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6Q_GPR1_ENET_CLK_SEL_MASK, + IMX6Q_GPR1_ENET_CLK_SEL_ANATOP); else pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n"); } -static void __init imx6q_usb_init(void) -{ - imx_anatop_usb_chrg_detect_disable(); -} static void __init imx6q_init_machine(void) { - if (of_machine_is_compatible("fsl,imx6q-sabrelite")) - imx6q_sabrelite_init(); - else if (of_machine_is_compatible("fsl,imx6q-sabresd") || - of_machine_is_compatible("fsl,imx6dl-sabresd")) - imx6q_sabresd_init(); + imx6q_enet_phy_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); imx_anatop_init(); imx6q_pm_init(); - imx6q_usb_init(); imx6q_1588_init(); } @@ -254,13 +237,12 @@ static void __init imx6q_opp_init(struct device *cpu_dev) { struct device_node *np; - np = of_find_node_by_path("/cpus/cpu@0"); + np = of_node_get(cpu_dev->of_node); if (!np) { pr_warn("failed to find cpu0 node\n"); return; } - cpu_dev->of_node = np; if (of_init_opp_table(cpu_dev)) { pr_warn("failed to init OPP table\n"); goto put_node; @@ -297,44 +279,10 @@ static void __init imx6q_map_io(void) imx_scu_map_io(); } -#ifdef CONFIG_CACHE_L2X0 -static void __init imx6q_init_l2cache(void) -{ - void __iomem *l2x0_base; - struct device_node *np; - unsigned int val; - - np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); - if (!np) - goto out; - - l2x0_base = of_iomap(np, 0); - if (!l2x0_base) { - of_node_put(np); - goto out; - } - - /* Configure the L2 PREFETCH and POWER registers */ - val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); - val |= 0x70800000; - writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL); - val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN; - writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL); - - iounmap(l2x0_base); - of_node_put(np); - -out: - l2x0_of_init(0, ~0UL); -} -#else -static inline void imx6q_init_l2cache(void) {} -#endif - static void __init imx6q_init_irq(void) { imx6q_init_revision(); - imx6q_init_l2cache(); + imx_init_l2cache(); imx_src_init(); imx_gpc_init(); irqchip_init(); diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 132db2609507f44f4806583069123e557ff76e9d..0d75dc54f71508fa48cf3a3096931aed8db31bce 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include @@ -26,7 +25,7 @@ static void __init imx6sl_init_machine(void) static void __init imx6sl_init_irq(void) { - l2x0_of_init(0, ~0UL); + imx_init_l2cache(); imx_src_init(); imx_gpc_init(); irqchip_init(); diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index a27faaba98ec093cd030ea14c0ac80aaa00de75d..c91894003da9d30ef7ecfe2795798abe228b14d6 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include "common.h" #include "devices-imx27.h" diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index cf193d87274ac316674dfb4d0e50ccc81adbf4f0..a8229b7f10bf0bf2380e747d8194b1c35f5bed18 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -153,10 +153,10 @@ void __init imx51_soc_init(void) void __init imx51_init_late(void) { mx51_neon_fixup(); - imx51_pm_init(); + imx5_pm_init(); } void __init imx53_init_late(void) { - imx53_pm_init(); + imx5_pm_init(); } diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index 82e79c658eb263a0e261dbae36d712f431ad25d0..58aeaf5baaf62f24368b1b646e57aee867282d03 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -169,14 +169,9 @@ static int __init imx5_pm_common_init(void) return imx5_cpuidle_init(); } -void __init imx51_pm_init(void) +void __init imx5_pm_init(void) { int ret = imx5_pm_common_init(); if (!ret) suspend_set_ops(&mx5_suspend_ops); } - -void __init imx53_pm_init(void) -{ - imx5_pm_common_init(); -} diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 6fe81bb4d3c9641cd50d48e2944b8bfad71a0fe2..64ff37ea72b17455a1b5be7600ff7a1c16ceab16 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "common.h" #include "hardware.h" @@ -95,3 +96,35 @@ void __init mxc_arch_reset_init_dt(void) clk_prepare(wdog_clk); } + +#ifdef CONFIG_CACHE_L2X0 +void __init imx_init_l2cache(void) +{ + void __iomem *l2x0_base; + struct device_node *np; + unsigned int val; + + np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); + if (!np) + goto out; + + l2x0_base = of_iomap(np, 0); + if (!l2x0_base) { + of_node_put(np); + goto out; + } + + /* Configure the L2 PREFETCH and POWER registers */ + val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); + val |= 0x70800000; + writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL); + val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN; + writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL); + + iounmap(l2x0_base); + of_node_put(np); + +out: + l2x0_of_init(0, ~0UL); +} +#endif diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S deleted file mode 100644 index 411b116077e4376b7be3e1807448f2dc4a3be97a..0000000000000000000000000000000000000000 --- a/arch/arm/mach-integrator/include/mach/debug-macro.S +++ /dev/null @@ -1,20 +0,0 @@ -/* arch/arm/mach-integrator/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart, rp, rv, tmp - mov \rp, #0x16000000 @ physical base address - mov \rv, #0xf0000000 @ virtual base - add \rv, \rv, #0x16000000 >> 4 - .endm - -#include diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S deleted file mode 100644 index d869a6f67e5c97b4a913f854de0b28908bd87247..0000000000000000000000000000000000000000 --- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/mach-iop13xx/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - .macro addruart, rp, rv, tmp - mov \rp, #0x00002300 - orr \rp, \rp, #0x00000040 - orr \rv, \rp, #0xfe000000 @ virtual - orr \rv, \rv, #0x00e80000 - orr \rp, \rp, #0xff000000 @ physical - orr \rp, \rp, #0x00d80000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S deleted file mode 100644 index 363bdf90b34d4b1ec5d9085ea26584238f68ba7a..0000000000000000000000000000000000000000 --- a/arch/arm/mach-iop32x/include/mach/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - .macro addruart, rp, rv, tmp - mov \rp, #0xfe000000 @ physical as well as virtual - orr \rp, \rp, #0x00800000 @ location of the UART - mov \rv, \rp - .endm - -#define UART_SHIFT 0 -#include diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S deleted file mode 100644 index 361be1f6026e19e11f827f24d7e64c11c44821dc..0000000000000000000000000000000000000000 --- a/arch/arm/mach-iop33x/include/mach/debug-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - .macro addruart, rp, rv, tmp - mov \rp, #0x00ff0000 - orr \rp, \rp, #0x0000f700 - orr \rv, #0xfe000000 @ virtual - orr \rp, #0xff000000 @ physical - .endm - -#define UART_SHIFT 2 -#include diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S deleted file mode 100644 index ff686cbc5df44d54547b4816588fe808a5bdd424..0000000000000000000000000000000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ /dev/null @@ -1,26 +0,0 @@ -/* arch/arm/mach-ixp4xx/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - .macro addruart, rp, rv, tmp -#ifdef __ARMEB__ - mov \rp, #3 @ Uart regs are at off set of 3 if - @ byte writes used - Big Endian. -#else - mov \rp, #0 -#endif - orr \rv, \rp, #0xfe000000 @ virtual - orr \rv, \rv, #0x00f00000 - orr \rp, \rp, #0xc8000000 @ physical - .endm - -#define UART_SHIFT 2 -#include diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index 51a50e996840c5a63664a1d2952d750feb5515b2..366d1a3b418d4c513910aa7ec23283ab05d35295 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -7,7 +7,6 @@ config ARCH_KEYSTONE select HAVE_SMP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS - select HAVE_SCHED_CLOCK select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_ERRATA_798181 if SMP help diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c index 14378e3fef16309f2da2bb91ae6e558972bde938..c12296157d4a4bfab0a0b52de2e205b7701ebc60 100644 --- a/arch/arm/mach-keystone/platsmp.c +++ b/arch/arm/mach-keystone/platsmp.c @@ -38,6 +38,5 @@ static int keystone_smp_boot_secondary(unsigned int cpu, } struct smp_operations keystone_smp_ops __initdata = { - .smp_init_cpus = arm_dt_init_cpu_maps, .smp_boot_secondary = keystone_smp_boot_secondary, }; diff --git a/arch/arm/mach-keystone/smc.S b/arch/arm/mach-keystone/smc.S index 9b9e4f7b241ee83660742c7c487f886417ed4bf4..d15de8179fabcee3ebe665658348bf4aead2a5e3 100644 --- a/arch/arm/mach-keystone/smc.S +++ b/arch/arm/mach-keystone/smc.S @@ -22,8 +22,7 @@ * Return: Non zero value on failure */ ENTRY(keystone_cpu_smc) - stmfd sp!, {r4-r12, lr} + stmfd sp!, {r4-r11, lr} smc #0 - dsb - ldmfd sp!, {r4-r12, pc} + ldmfd sp!, {r4-r11, pc} ENDPROC(keystone_cpu_smc) diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index b634f9650a7bfb2f44c84326496b24495f94f50e..fe8319ad3158540355250c030aabd6c7f15878ea 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -2,67 +2,32 @@ if ARCH_KIRKWOOD menu "Marvell Kirkwood Implementations" +config KIRKWOOD_LEGACY + bool + config MACH_D2NET_V2 bool "LaCie d2 Network v2 NAS Board" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the LaCie d2 Network v2 NAS. -config MACH_DOCKSTAR - bool "Seagate FreeAgent DockStar" - help - Say 'Y' here if you want your kernel to support the - Seagate FreeAgent DockStar. - -config MACH_ESATA_SHEEVAPLUG - bool "Marvell eSATA SheevaPlug Reference Board" - help - Say 'Y' here if you want your kernel to support the - Marvell eSATA SheevaPlug Reference Board. - -config MACH_GURUPLUG - bool "Marvell GuruPlug Reference Board" - help - Say 'Y' here if you want your kernel to support the - Marvell GuruPlug Reference Board. - -config MACH_INETSPACE_V2 - bool "LaCie Internet Space v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie Internet Space v2 NAS. - -config MACH_MV88F6281GTW_GE - bool "Marvell 88F6281 GTW GE Board" - help - Say 'Y' here if you want your kernel to support the - Marvell 88F6281 GTW GE Board. - config MACH_NET2BIG_V2 bool "LaCie 2Big Network v2 NAS Board" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the LaCie 2Big Network v2 NAS. config MACH_NET5BIG_V2 bool "LaCie 5Big Network v2 NAS Board" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the LaCie 5Big Network v2 NAS. -config MACH_NETSPACE_MAX_V2 - bool "LaCie Network Space Max v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie Network Space Max v2 NAS. - -config MACH_NETSPACE_V2 - bool "LaCie Network Space v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie Network Space v2 NAS. - config MACH_OPENRD + select KIRKWOOD_LEGACY bool config MACH_OPENRD_BASE @@ -88,30 +53,28 @@ config MACH_OPENRD_ULTIMATE config MACH_RD88F6192_NAS bool "Marvell RD-88F6192-NAS Reference Board" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the Marvell RD-88F6192-NAS Reference Board. config MACH_RD88F6281 bool "Marvell RD-88F6281 Reference Board" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the Marvell RD-88F6281 Reference Board. -config MACH_SHEEVAPLUG - bool "Marvell SheevaPlug Reference Board" - help - Say 'Y' here if you want your kernel to support the - Marvell SheevaPlug Reference Board. - config MACH_T5325 bool "HP t5325 Thin Client" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the HP t5325 Thin Client. config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and @@ -119,6 +82,7 @@ config MACH_TS219 config MACH_TS41X bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo @@ -129,6 +93,9 @@ comment "Device tree entries" config ARCH_KIRKWOOD_DT bool "Marvell Kirkwood Flattened Device Tree" select KIRKWOOD_CLK + select OF_IRQ + select ORION_IRQCHIP + select ORION_TIMER select POWER_SUPPLY select POWER_RESET select POWER_RESET_GPIO @@ -139,184 +106,12 @@ config ARCH_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Marvell Kirkwood using flattened device tree. -config MACH_CLOUDBOX_DT - bool "LaCie CloudBox NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - CloudBox NAS, using Flattened Device Tree. - -config MACH_DB88F628X_BP_DT - bool "Marvell DB-88F628x-BP Development Board (Flattened Device Tree)" - help - Say 'Y' here if you want your kernel to support the Marvell - DB-88F6281-BP and DB-88F6282-BP Development Board (Flattened - Device Tree). - -config MACH_DLINK_KIRKWOOD_DT - bool "D-Link Kirkwood-based NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Kirkwood-based D-Link NASes such as DNS-320 & DNS-325, - using Flattened Device Tree. - -config MACH_DOCKSTAR_DT - bool "Seagate FreeAgent Dockstar (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT +config MACH_MV88F6281GTW_GE_DT + bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)" + depends on ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the - Seagate FreeAgent Dockstar (Flattened Device Tree). - -config MACH_DREAMPLUG_DT - bool "Marvell DreamPlug (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Marvell DreamPlug (Flattened Device Tree). - -config MACH_GOFLEXNET_DT - bool "Seagate GoFlex Net (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Seagate GoFlex Net (Flattened Device Tree). - -config MACH_GURUPLUG_DT - bool "Marvell GuruPlug Reference Board (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Marvell GuruPlug Reference Board (Flattened Device Tree). - -config MACH_IB62X0_DT - bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - RaidSonic IB-NAS6210 & IB-NAS6220 devices, using - Flattened Device Tree. - -config MACH_ICONNECT_DT - bool "Iomega Iconnect (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here to enable Iomega Iconnect support. - -config MACH_INETSPACE_V2_DT - bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Internet Space v2 NAS, using Flattened Device Tree. - -config MACH_IOMEGA_IX2_200_DT - bool "Iomega StorCenter ix2-200 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Iomega StorCenter ix2-200 (Flattened Device Tree). - -config MACH_KM_KIRKWOOD_DT - bool "Keymile Kirkwood Reference Design (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Keymile Kirkwood Reference Desgin, using Flattened Device Tree. - -config MACH_LSXL_DT - bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - select POWER_RESET_RESTART - help - Say 'Y' here if you want your kernel to support the - Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using - Flattened Device Tree. - -config MACH_MPLCEC4_DT - bool "MPL CEC4 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - MPL CEC4 (Flattened Device Tree). - -config MACH_NETSPACE_LITE_V2_DT - bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Lite v2 NAS, using Flattened Device Tree. - -config MACH_NETSPACE_MAX_V2_DT - bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Max v2 NAS, using Flattened Device Tree. - -config MACH_NETSPACE_MINI_V2_DT - bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Mini v2 NAS using Flattened Device Tree. - - This board is embedded in a product named CloudBox, which - provides automatic backup on a 100GB cloud storage. This - should not confused with a more recent LaCie NAS also named - CloudBox. For this last, the disk capacity is 1TB or above. - -config MACH_NETSPACE_V2_DT - bool "LaCie Network Space v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space v2 NAS, using Flattened Device Tree. - -config MACH_OPENBLOCKS_A6_DT - bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Plat'Home OpenBlocks A6 (Flattened Device Tree). - -config MACH_READYNAS_DT - bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - select ARM_APPENDED_DTB - select ARM_ATAG_DTB_COMPAT - help - Say 'Y' here if you want your kernel to support the - NETGEAR ReadyNAS Duo v2 using Fattened Device Tree. - -config MACH_SHEEVAPLUG_DT - bool "Marvell (eSATA) SheevaPlug (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Marvell (eSATA) SheevaPlug (Flattened Device Tree). - -config MACH_TOPKICK_DT - bool "USI Topkick (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - USI Topkick, using Flattened Device Tree - -config MACH_TS219_DT - bool "Device Tree for QNAP TS-11X, TS-21X NAS" - select ARCH_KIRKWOOD_DT - select ARM_APPENDED_DTB - select ARM_ATAG_DTB_COMPAT - select POWER_RESET_QNAP - help - Say 'Y' here if you want your kernel to support the QNAP - TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and - TS-219P+ Turbo NAS devices using Fattened Device Tree. - There are two different Device Tree descriptions, depending - on if the device is based on an if the board uses the MV6281 - or MV6282. If you have the wrong one, the buttons will not - work. + Marvell 88F6281 GTW GE Board (Flattened Device Tree). endmenu diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index ac4cd75dd499d37117bfe1603dfc803ae6e5739f..d1f8e3d0793bef6dea7f05cdf8368a981c999702 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -1,44 +1,14 @@ -obj-y += common.o irq.o pcie.o mpp.o - +obj-y += common.o pcie.o +obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o -obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o -obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o -obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o -obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o -obj-$(CONFIG_MACH_CLOUDBOX_DT) += board-ns2.o -obj-$(CONFIG_MACH_DB88F628X_BP_DT) += board-db88f628x-bp.o -obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o -obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o -obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o -obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o -obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o -obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o -obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o -obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o -obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o -obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o -obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o -obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o -obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o -obj-$(CONFIG_MACH_SHEEVAPLUG_DT) += board-sheevaplug.o -obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o -obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o +obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT) += board-mv88f6281gtw_ge.o diff --git a/arch/arm/mach-kirkwood/board-db88f628x-bp.c b/arch/arm/mach-kirkwood/board-db88f628x-bp.c deleted file mode 100644 index 2f574bc8ed4040454facb1806e32d01b787122ae..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-db88f628x-bp.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Saeed Bishara - * - * Marvell DB-88F628{1,2}-BP Development Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data db88f628x_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -void __init db88f628x_init(void) -{ - kirkwood_ge00_init(&db88f628x_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c deleted file mode 100644 index a1aa87f09180f91215a3d2c95c3c6153f82f87f2..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright 2012 (C), Jamie Lentin - * - * arch/arm/mach-kirkwood/board-dnskw.c - * - * D-link DNS-320 & DNS-325 NAS Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data dnskw_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/* Register any GPIO for output and set the value */ -static void __init dnskw_gpio_register(unsigned gpio, char *name, int def) -{ - if (gpio_request(gpio, name) == 0 && - gpio_direction_output(gpio, 0) == 0) { - gpio_set_value(gpio, def); - if (gpio_export(gpio, 0) != 0) - pr_err("dnskw: Failed to export GPIO %s\n", name); - } else - pr_err("dnskw: Failed to register %s\n", name); -} - -void __init dnskw_init(void) -{ - kirkwood_ge00_init(&dnskw_ge00_data); - - /* Set NAS to turn back on after a power failure */ - dnskw_gpio_register(37, "dnskw:power:recover", 1); -} diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c deleted file mode 100644 index d7196db339841fa49f517b3c14602278de15a57f..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-dockstar.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-dockstar.c - * - * Seagate FreeAgent Dockstar Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * Copied and modified for Seagate GoFlex Net support by - * Joshua Coombs based on ArchLinux ARM's - * GoFlex kernel patches. - * - */ - -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data dockstar_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init dockstar_dt_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&dockstar_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c deleted file mode 100644 index 0903242c00dc9a21d2f4f8868360cc92a63569a1..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright 2012 (C), Jason Cooper - * - * arch/arm/mach-kirkwood/board-dreamplug.c - * - * Marvell DreamPlug Reference Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data dreamplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data dreamplug_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -void __init dreamplug_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&dreamplug_ge00_data); - kirkwood_ge01_init(&dreamplug_ge01_data); -} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 6e122ed3282f514d51f9c6cfc6d04f3be39cf3b9..82d3ad8e87cf91395c0c706b48ef7df684e1e644 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -15,6 +15,9 @@ #include #include #include +#include +#include +#include #include #include #include @@ -49,10 +52,6 @@ static void __init kirkwood_legacy_clk_init(void) orion_clkdev_add("1", "pcie", of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_SDIO; - orion_clkdev_add(NULL, "mvsdio", - of_clk_get_from_provider(&clkspec)); - /* * The ethernet interfaces forget the MAC address assigned by * u-boot if the clocks are turned off. Until proper DT support @@ -60,19 +59,24 @@ static void __init kirkwood_legacy_clk_init(void) */ clkspec.args[0] = CGC_BIT_GE0; clk = of_clk_get_from_provider(&clkspec); - orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk); clk_prepare_enable(clk); clkspec.args[0] = CGC_BIT_GE1; clk = of_clk_get_from_provider(&clkspec); - orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk); clk_prepare_enable(clk); } -static void __init kirkwood_of_clk_init(void) +static void __init kirkwood_dt_time_init(void) { of_clk_init(NULL); - kirkwood_legacy_clk_init(); + clocksource_of_init(); +} + +static void __init kirkwood_dt_init_early(void) +{ + mvebu_mbus_init("marvell,kirkwood-mbus", + BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, + DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); } static void __init kirkwood_dt_init(void) @@ -87,14 +91,15 @@ static void __init kirkwood_dt_init(void) */ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + BUG_ON(mvebu_mbus_dt_init()); kirkwood_setup_wins(); kirkwood_l2_init(); kirkwood_cpufreq_init(); - /* Setup root of clk tree */ - kirkwood_of_clk_init(); + /* Setup clocks for legacy devices */ + kirkwood_legacy_clk_init(); kirkwood_cpuidle_init(); @@ -102,105 +107,22 @@ static void __init kirkwood_dt_init(void) kexec_reinit = kirkwood_enable_pcie; #endif - if (of_machine_is_compatible("globalscale,dreamplug")) - dreamplug_init(); - - if (of_machine_is_compatible("globalscale,guruplug")) - guruplug_dt_init(); - - if (of_machine_is_compatible("globalscale,sheevaplug")) - sheevaplug_dt_init(); - - if (of_machine_is_compatible("dlink,dns-kirkwood")) - dnskw_init(); - - if (of_machine_is_compatible("iom,iconnect")) - iconnect_init(); - - if (of_machine_is_compatible("raidsonic,ib-nas62x0")) - ib62x0_init(); - - if (of_machine_is_compatible("qnap,ts219")) - qnap_dt_ts219_init(); - - if (of_machine_is_compatible("seagate,dockstar")) - dockstar_dt_init(); - - if (of_machine_is_compatible("seagate,goflexnet")) - goflexnet_init(); - - if (of_machine_is_compatible("buffalo,lsxl")) - lsxl_init(); - - if (of_machine_is_compatible("iom,ix2-200")) - iomega_ix2_200_init(); - - if (of_machine_is_compatible("keymile,km_kirkwood")) - km_kirkwood_init(); - - if (of_machine_is_compatible("lacie,cloudbox") || - of_machine_is_compatible("lacie,inetspace_v2") || - of_machine_is_compatible("lacie,netspace_lite_v2") || - of_machine_is_compatible("lacie,netspace_max_v2") || - of_machine_is_compatible("lacie,netspace_mini_v2") || - of_machine_is_compatible("lacie,netspace_v2")) - ns2_init(); - - if (of_machine_is_compatible("marvell,db-88f6281-bp") || - of_machine_is_compatible("marvell,db-88f6282-bp")) - db88f628x_init(); - - if (of_machine_is_compatible("mpl,cec4")) - mplcec4_init(); - - if (of_machine_is_compatible("netgear,readynas-duo-v2")) - netgear_readynas_init(); - - if (of_machine_is_compatible("plathome,openblocks-a6")) - openblocks_a6_init(); - - if (of_machine_is_compatible("usi,topkick")) - usi_topkick_init(); + if (of_machine_is_compatible("marvell,mv88f6281gtw-ge")) + mv88f6281gtw_ge_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const kirkwood_dt_board_compat[] = { - "globalscale,dreamplug", - "globalscale,guruplug", - "globalscale,sheevaplug", - "dlink,dns-320", - "dlink,dns-325", - "iom,iconnect", - "raidsonic,ib-nas62x0", - "qnap,ts219", - "seagate,dockstar", - "seagate,goflexnet", - "buffalo,lsxl", - "iom,ix2-200", - "keymile,km_kirkwood", - "lacie,cloudbox", - "lacie,inetspace_v2", - "lacie,netspace_lite_v2", - "lacie,netspace_max_v2", - "lacie,netspace_mini_v2", - "lacie,netspace_v2", - "marvell,db-88f6281-bp", - "marvell,db-88f6282-bp", - "mpl,cec4", - "netgear,readynas-duo-v2", - "plathome,openblocks-a6", - "usi,topkick", - "zyxel,nsa310", + "marvell,kirkwood", NULL }; DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") /* Maintainer: Jason Cooper */ .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = orion_dt_init_irq, - .init_time = kirkwood_timer_init, + .init_early = kirkwood_dt_init_early, + .init_time = kirkwood_dt_time_init, .init_machine = kirkwood_dt_init, .restart = kirkwood_restart, .dt_compat = kirkwood_dt_board_compat, diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c deleted file mode 100644 index 9db979aec82e6e112d40be72b0b08b04ad386096..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-goflexnet.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2012 (C), Jason Cooper - * - * arch/arm/mach-kirkwood/board-goflexnet.c - * - * Seagate GoFlext Net Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * Copied and modified for Seagate GoFlex Net support by - * Joshua Coombs based on ArchLinux ARM's - * GoFlex kernel patches. - * - */ - -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data goflexnet_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init goflexnet_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&goflexnet_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c deleted file mode 100644 index a857163954a58add37c176636992d44c21727a31..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-guruplug.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-guruplug.c - * - * Marvell Guruplug Reference Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data guruplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data guruplug_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -void __init guruplug_dt_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&guruplug_ge00_data); - kirkwood_ge01_init(&guruplug_ge01_data); -} diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c deleted file mode 100644 index 9a857ae8398437e9ce433b4e00d0229114bd8c22..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2012 (C), Simon Baatz - * - * arch/arm/mach-kirkwood/board-ib62x0.c - * - * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not - * converted to flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data ib62x0_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -void __init ib62x0_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&ib62x0_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c deleted file mode 100644 index 98b5ad1bba90cc0f4f985043cfd2bebd56c562b3..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-iconnect.c - * - * Iomega i-connect Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data iconnect_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(11), -}; - -void __init iconnect_init(void) -{ - kirkwood_ge00_init(&iconnect_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c deleted file mode 100644 index e5f70415905a998e919b5b4aabe8d3121fa8a81e..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-iomega_ix2_200.c - * - * Iomega StorCenter ix2-200 - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, -}; - -static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(11), -}; - -void __init iomega_ix2_200_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&iomega_ix2_200_ge00_data); - kirkwood_ge01_init(&iomega_ix2_200_ge01_data); -} diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c deleted file mode 100644 index 44e4605ba0bfbcb70b1ef1827acdeeffc03cbcd1..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-km_kirkwood.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern - * Valentin Longchamp - * - * arch/arm/mach-kirkwood/board-km_kirkwood.c - * - * Keymile km_kirkwood Reference Desing Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init km_kirkwood_init(void) -{ - struct clk *sata_clk; - /* - * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing - * SATA bits (14-15) of the Clock Gating Control Register. Since these - * devices are also not present in this variant, their clocks get - * disabled because unused when clk_disable_unused() gets called. - * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED - */ - sata_clk = clk_get_sys("sata_mv.0", "0"); - if (!IS_ERR(sata_clk)) - sata_clk->flags |= CLK_IGNORE_UNUSED; - sata_clk = clk_get_sys("sata_mv.0", "1"); - if (!IS_ERR(sata_clk)) - sata_clk->flags |= CLK_IGNORE_UNUSED; - - kirkwood_ge00_init(&km_kirkwood_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c deleted file mode 100644 index 348395238df6da58b4ebae42d3494a544c75969a..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-lsxl.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright 2012 (C), Michael Walle - * - * arch/arm/mach-kirkwood/board-lsxl.c - * - * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not - * converted to flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data lsxl_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data lsxl_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -void __init lsxl_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - - kirkwood_ge00_init(&lsxl_ge00_data); - kirkwood_ge01_init(&lsxl_ge01_data); -} diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c deleted file mode 100644 index 938712e248f1ffc04f9e2ff6eae5d7633da93e96..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-mplcec4.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2012 MPL AG, Switzerland - * Stefan Peter - * - * arch/arm/mach-kirkwood/board-mplcec4.c - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data mplcec4_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -static struct mv643xx_eth_platform_data mplcec4_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(2), -}; - -void __init mplcec4_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&mplcec4_ge00_data); - kirkwood_ge01_init(&mplcec4_ge01_data); -} - - - diff --git a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c new file mode 100644 index 0000000000000000000000000000000000000000..ee5eea678c117990db5c8e68407ba053806dc55e --- /dev/null +++ b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c @@ -0,0 +1,50 @@ +/* + * arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c + * + * Marvell 88F6281 GTW GE Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" + +static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = { + .port_names[0] = "lan1", + .port_names[1] = "lan2", + .port_names[2] = "lan3", + .port_names[3] = "lan4", + .port_names[4] = "wan", + .port_names[5] = "cpu", +}; + +static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = { + .nr_chips = 1, + .chip = &mv88f6281gtw_ge_switch_chip_data, +}; + +void __init mv88f6281gtw_ge_init(void) +{ + kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data); + kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ); +} diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c deleted file mode 100644 index f8f660525aceb405f80786a80571957ee216861c..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-ns2.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright 2012 (C), Simon Guinot - * - * arch/arm/mach-kirkwood/board-ns2.c - * - * LaCie Network Space v2 board (and parents) initialization for drivers - * not converted to flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data ns2_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -void __init ns2_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - if (of_machine_is_compatible("lacie,cloudbox") || - of_machine_is_compatible("lacie,netspace_lite_v2") || - of_machine_is_compatible("lacie,netspace_mini_v2")) - ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); - kirkwood_ge00_init(&ns2_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c deleted file mode 100644 index b11d8fdeca9351bfd69438b78a7083eadbf45d54..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-openblocks_a6.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright 2012 Nobuhiro Iwamatsu - * - * arch/arm/mach-kirkwood/board-openblocks_a6.c - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data openblocks_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init openblocks_a6_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&openblocks_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c deleted file mode 100644 index 341b82d9cadb452046d53ee3b88fd38c1416e1ff..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-readynas.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * NETGEAR ReadyNAS Duo v2 Board setup for drivers not already - * converted to DT. - * - * Copyright (C) 2013, Arnaud EBALARD - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init netgear_readynas_init(void) -{ - kirkwood_ge00_init(&netgear_readynas_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-sheevaplug.c b/arch/arm/mach-kirkwood/board-sheevaplug.c deleted file mode 100644 index fa389373ca7421abdaa7a2acb321170a42db25cd..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-sheevaplug.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-sheevaplug.c - * - * Marvell Sheevaplug Reference Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init sheevaplug_dt_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&sheevaplug_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c deleted file mode 100644 index 860f44ab457d4f5b1857028da93bf58c56fd2f05..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * - * QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT - * - * Copyright (C) 2012 Andrew Lunn - * - * Based on the board file ts219-setup.c: - * - * Copyright (C) 2009 Martin Michlmayr - * Copyright (C) 2008 Byron Bradley - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -void __init qnap_dt_ts219_init(void) -{ - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - if (dev == MV88F6282_DEV_ID) - qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); - - kirkwood_ge00_init(&qnap_ts219_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c deleted file mode 100644 index 1cc04ec33f0b77d2363694e62fa8f81a153716fe..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/board-usi_topkick.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2012 (C), Jason Cooper - * - * arch/arm/mach-kirkwood/board-usi_topkick.c - * - * USI Topkick Init for drivers not converted to flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data topkick_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init usi_topkick_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&topkick_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index e9238b5567eeba8e1ac2df9402d53859b27b7879..176761134a66b161592fd371593277cbd2f2e725 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -37,6 +37,12 @@ #include #include "common.h" +/* These can go away once Kirkwood uses the mvebu-mbus DT binding */ +#define KIRKWOOD_MBUS_NAND_TARGET 0x01 +#define KIRKWOOD_MBUS_NAND_ATTR 0x2f +#define KIRKWOOD_MBUS_SRAM_TARGET 0x03 +#define KIRKWOOD_MBUS_SRAM_ATTR 0x01 + /***************************************************************************** * I/O Address Mapping ****************************************************************************/ @@ -264,7 +270,7 @@ void __init kirkwood_clk_init(void) orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1); orion_clkdev_add("0", "pcie", pex0); orion_clkdev_add("1", "pcie", pex1); - orion_clkdev_add(NULL, "kirkwood-i2s", audio); + orion_clkdev_add(NULL, "mvebu-audio", audio); orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit); @@ -528,10 +534,6 @@ void __init kirkwood_cpuidle_init(void) void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); - - mvebu_mbus_init("marvell,kirkwood-mbus", - BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, - DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); } int kirkwood_tclk; @@ -560,7 +562,7 @@ void __init kirkwood_timer_init(void) /***************************************************************************** * Audio ****************************************************************************/ -static struct resource kirkwood_i2s_resources[] = { +static struct resource kirkwood_audio_resources[] = { [0] = { .start = AUDIO_PHYS_BASE, .end = AUDIO_PHYS_BASE + SZ_16K - 1, @@ -573,29 +575,23 @@ static struct resource kirkwood_i2s_resources[] = { }, }; -static struct kirkwood_asoc_platform_data kirkwood_i2s_data = { +static struct kirkwood_asoc_platform_data kirkwood_audio_data = { .burst = 128, }; -static struct platform_device kirkwood_i2s_device = { - .name = "kirkwood-i2s", +static struct platform_device kirkwood_audio_device = { + .name = "mvebu-audio", .id = -1, - .num_resources = ARRAY_SIZE(kirkwood_i2s_resources), - .resource = kirkwood_i2s_resources, + .num_resources = ARRAY_SIZE(kirkwood_audio_resources), + .resource = kirkwood_audio_resources, .dev = { - .platform_data = &kirkwood_i2s_data, + .platform_data = &kirkwood_audio_data, }, }; -static struct platform_device kirkwood_pcm_device = { - .name = "kirkwood-pcm-audio", - .id = -1, -}; - void __init kirkwood_audio_init(void) { - platform_device_register(&kirkwood_i2s_device); - platform_device_register(&kirkwood_pcm_device); + platform_device_register(&kirkwood_audio_device); } /***************************************************************************** @@ -672,10 +668,14 @@ char * __init kirkwood_id(void) void __init kirkwood_setup_wins(void) { - mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE, - KIRKWOOD_NAND_MEM_SIZE); - mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE, - KIRKWOOD_SRAM_SIZE); + mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET, + KIRKWOOD_MBUS_NAND_ATTR, + KIRKWOOD_NAND_MEM_PHYS_BASE, + KIRKWOOD_NAND_MEM_SIZE); + mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET, + KIRKWOOD_MBUS_SRAM_ATTR, + KIRKWOOD_SRAM_PHYS_BASE, + KIRKWOOD_SRAM_SIZE); } void __init kirkwood_l2_init(void) @@ -703,6 +703,10 @@ void __init kirkwood_init(void) */ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus", + BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, + DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ)); + kirkwood_setup_wins(); kirkwood_l2_init(); diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index fcf3ba682e244833e0f9244b82c7e2b5c546bfe3..1296de94febff5735d0998dd0f6d4587d8642346 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -59,119 +59,10 @@ void kirkwood_restart(enum reboot_mode, const char *); void kirkwood_clk_init(void); /* board init functions for boards not fully converted to fdt */ -#ifdef CONFIG_MACH_DREAMPLUG_DT -void dreamplug_init(void); +#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT +void mv88f6281gtw_ge_init(void); #else -static inline void dreamplug_init(void) {}; -#endif -#ifdef CONFIG_MACH_GURUPLUG_DT -void guruplug_dt_init(void); -#else -static inline void guruplug_dt_init(void) {}; -#endif -#ifdef CONFIG_MACH_SHEEVAPLUG_DT -void sheevaplug_dt_init(void); -#else -static inline void sheevaplug_dt_init(void) {}; -#endif -#ifdef CONFIG_MACH_TS219_DT -void qnap_dt_ts219_init(void); -#else -static inline void qnap_dt_ts219_init(void) {}; -#endif - -#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT -void dnskw_init(void); -#else -static inline void dnskw_init(void) {}; -#endif - -#ifdef CONFIG_MACH_ICONNECT_DT -void iconnect_init(void); -#else -static inline void iconnect_init(void) {}; -#endif - -#ifdef CONFIG_MACH_IB62X0_DT -void ib62x0_init(void); -#else -static inline void ib62x0_init(void) {}; -#endif - -#ifdef CONFIG_MACH_DOCKSTAR_DT -void dockstar_dt_init(void); -#else -static inline void dockstar_dt_init(void) {}; -#endif - -#ifdef CONFIG_MACH_GOFLEXNET_DT -void goflexnet_init(void); -#else -static inline void goflexnet_init(void) {}; -#endif - -#ifdef CONFIG_MACH_LSXL_DT -void lsxl_init(void); -#else -static inline void lsxl_init(void) {}; -#endif - -#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT -void iomega_ix2_200_init(void); -#else -static inline void iomega_ix2_200_init(void) {}; -#endif - -#ifdef CONFIG_MACH_KM_KIRKWOOD_DT -void km_kirkwood_init(void); -#else -static inline void km_kirkwood_init(void) {}; -#endif - -#ifdef CONFIG_MACH_DB88F628X_BP_DT -void db88f628x_init(void); -#else -static inline void db88f628x_init(void) {}; -#endif - -#ifdef CONFIG_MACH_MPLCEC4_DT -void mplcec4_init(void); -#else -static inline void mplcec4_init(void) {}; -#endif - -#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \ - defined(CONFIG_MACH_NETSPACE_V2_DT) || \ - defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \ - defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \ - defined(CONFIG_MACH_NETSPACE_MINI_V2_DT) -void ns2_init(void); -#else -static inline void ns2_init(void) {}; -#endif - -#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT -void openblocks_a6_init(void); -#else -static inline void openblocks_a6_init(void) {}; -#endif - -#ifdef CONFIG_MACH_READYNAS_DT -void netgear_readynas_init(void); -#else -static inline void netgear_readynas_init(void) {}; -#endif - -#ifdef CONFIG_MACH_TOPKICK_DT -void usi_topkick_init(void); -#else -static inline void usi_topkick_init(void) {}; -#endif - -#ifdef CONFIG_MACH_CLOUDBOX_DT -void cloudbox_init(void); -#else -static inline void cloudbox_init(void) {}; +static inline void mv88f6281gtw_ge_init(void) {}; #endif /* early init functions not converted to fdt yet */ diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c deleted file mode 100644 index 060ccf9cb63fa9b00c89b4eb9ce5d64d0471d646..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/dockstar-setup.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * arch/arm/mach-kirkwood/dockstar-setup.c - * - * Seagate FreeAgent DockStar Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "mpp.h" - -static struct mtd_partition dockstar_nand_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_1M - }, { - .name = "uImage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_4M - }, { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - }, -}; - -static struct mv643xx_eth_platform_data dockstar_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct gpio_led dockstar_led_pins[] = { - { - .name = "dockstar:green:health", - .default_trigger = "default-on", - .gpio = 46, - .active_low = 1, - }, - { - .name = "dockstar:orange:misc", - .default_trigger = "none", - .gpio = 47, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dockstar_led_data = { - .leds = dockstar_led_pins, - .num_leds = ARRAY_SIZE(dockstar_led_pins), -}; - -static struct platform_device dockstar_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dockstar_led_data, - } -}; - -static unsigned int dockstar_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP46_GPIO, /* LED green */ - MPP47_GPIO, /* LED orange */ - 0 -}; - -static void __init dockstar_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - - /* setup gpio pin select */ - kirkwood_mpp_conf(dockstar_mpp_config); - - kirkwood_uart0_init(); - kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25); - - if (gpio_request(29, "USB Power Enable") != 0 || - gpio_direction_output(29, 1) != 0) - pr_err("can't set up GPIO 29 (USB Power Enable)\n"); - kirkwood_ehci_init(); - - kirkwood_ge00_init(&dockstar_ge00_data); - - platform_device_register(&dockstar_leds); -} - -MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar") - .atag_offset = 0x100, - .init_machine = dockstar_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c deleted file mode 100644 index 08dd739aa70918fe9fdf1c06aeca7eda265ca07f..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * arch/arm/mach-kirkwood/guruplug-setup.c - * - * Marvell GuruPlug Reference Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "mpp.h" - -static struct mtd_partition guruplug_nand_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_1M - }, { - .name = "uImage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_4M - }, { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - }, -}; - -static struct mv643xx_eth_platform_data guruplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data guruplug_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -static struct mv_sata_platform_data guruplug_sata_data = { - .n_ports = 1, -}; - -static struct mvsdio_platform_data guruplug_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ - .gpio_card_detect = -1, - .gpio_write_protect = -1, -}; - -static struct gpio_led guruplug_led_pins[] = { - { - .name = "guruplug:red:health", - .gpio = 46, - .active_low = 1, - }, - { - .name = "guruplug:green:health", - .gpio = 47, - .active_low = 1, - }, - { - .name = "guruplug:red:wmode", - .gpio = 48, - .active_low = 1, - }, - { - .name = "guruplug:green:wmode", - .gpio = 49, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data guruplug_led_data = { - .leds = guruplug_led_pins, - .num_leds = ARRAY_SIZE(guruplug_led_pins), -}; - -static struct platform_device guruplug_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &guruplug_led_data, - } -}; - -static unsigned int guruplug_mpp_config[] __initdata = { - MPP46_GPIO, /* M_RLED */ - MPP47_GPIO, /* M_GLED */ - MPP48_GPIO, /* B_RLED */ - MPP49_GPIO, /* B_GLED */ - 0 -}; - -static void __init guruplug_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(guruplug_mpp_config); - - kirkwood_uart0_init(); - kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25); - - kirkwood_ehci_init(); - kirkwood_ge00_init(&guruplug_ge00_data); - kirkwood_ge01_init(&guruplug_ge01_data); - kirkwood_sata_init(&guruplug_sata_data); - kirkwood_sdio_init(&guruplug_mvsdio_data); - - platform_device_register(&guruplug_leds); -} - -MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") - /* Maintainer: Siddarth Gore */ - .atag_offset = 0x100, - .init_machine = guruplug_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S deleted file mode 100644 index f785d401a607d6ae518e08fd9c27f479e4a8af28..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - - .macro addruart, rp, rv, tmp - ldr \rp, =KIRKWOOD_REGS_PHYS_BASE - ldr \rv, =KIRKWOOD_REGS_VIRT_BASE - orr \rp, \rp, #0x00012000 - orr \rv, \rv, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c deleted file mode 100644 index ba384b992befa18916735fb295a55fa05d3e0dc0..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c - * - * Marvell 88F6281 GTW GE Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "mpp.h" - -static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, -}; - -static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = { - .port_names[0] = "lan1", - .port_names[1] = "lan2", - .port_names[2] = "lan3", - .port_names[3] = "lan4", - .port_names[4] = "wan", - .port_names[5] = "cpu", -}; - -static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = { - .nr_chips = 1, - .chip = &mv88f6281gtw_ge_switch_chip_data, -}; - -static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = { - .type = "mx25l12805d", -}; - -static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &mv88f6281gtw_ge_spi_slave_data, - .irq = -1, - .max_speed_hz = 50000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = { - { - .code = KEY_RESTART, - .gpio = 47, - .desc = "SWR Button", - .active_low = 1, - }, { - .code = KEY_WPS_BUTTON, - .gpio = 46, - .desc = "WPS Button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = { - .buttons = mv88f6281gtw_ge_button_pins, - .nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins), -}; - -static struct platform_device mv88f6281gtw_ge_buttons = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &mv88f6281gtw_ge_button_data, - }, -}; - -static struct gpio_led mv88f6281gtw_ge_led_pins[] = { - { - .name = "gtw:green:Status", - .gpio = 20, - .active_low = 0, - }, { - .name = "gtw:red:Status", - .gpio = 21, - .active_low = 0, - }, { - .name = "gtw:green:USB", - .gpio = 12, - .active_low = 0, - }, -}; - -static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = { - .leds = mv88f6281gtw_ge_led_pins, - .num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins), -}; - -static struct platform_device mv88f6281gtw_ge_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &mv88f6281gtw_ge_led_data, - }, -}; - -static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = { - MPP12_GPO, /* Status#_USB pin */ - MPP20_GPIO, /* Status#_GLED pin */ - MPP21_GPIO, /* Status#_RLED pin */ - MPP46_GPIO, /* WPS_Switch pin */ - MPP47_GPIO, /* SW_Init pin */ - 0 -}; - -static void __init mv88f6281gtw_ge_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config); - - kirkwood_ehci_init(); - kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data); - kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ); - spi_register_board_info(mv88f6281gtw_ge_spi_slave_info, - ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_uart0_init(); - platform_device_register(&mv88f6281gtw_ge_leds); - platform_device_register(&mv88f6281gtw_ge_buttons); -} - -static int __init mv88f6281gtw_ge_pci_init(void) -{ - if (machine_is_mv88f6281gtw_ge()) - kirkwood_pcie_init(KW_PCIE0); - - return 0; -} -subsys_initcall(mv88f6281gtw_ge_pci_init); - -MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") - /* Maintainer: Lennert Buytenhek */ - .atag_offset = 0x100, - .init_machine = mv88f6281gtw_ge_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c deleted file mode 100644 index 3b706611da8e981daf8bf5aa0ff43ab9b5569dd3..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ /dev/null @@ -1,293 +0,0 @@ -/* - * arch/arm/mach-kirkwood/netspace_v2-setup.c - * - * LaCie Network Space v2 board setup - * - * Copyright (C) 2009 Simon Guinot - * Copyright (C) 2009 Benoît Canet - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "mpp.h" -#include "lacie_v2-common.h" - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data netspace_v2_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data netspace_v2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO keys - ****************************************************************************/ - -#define NETSPACE_V2_PUSH_BUTTON 32 - -static struct gpio_keys_button netspace_v2_buttons[] = { - [0] = { - .code = KEY_POWER, - .gpio = NETSPACE_V2_PUSH_BUTTON, - .desc = "Power push button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data netspace_v2_button_data = { - .buttons = netspace_v2_buttons, - .nbuttons = ARRAY_SIZE(netspace_v2_buttons), -}; - -static struct platform_device netspace_v2_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &netspace_v2_button_data, - }, -}; - -/***************************************************************************** - * GPIO LEDs - ****************************************************************************/ - -#define NETSPACE_V2_GPIO_RED_LED 12 - -static struct gpio_led netspace_v2_gpio_led_pins[] = { - { - .name = "ns_v2:red:fail", - .gpio = NETSPACE_V2_GPIO_RED_LED, - }, -}; - -static struct gpio_led_platform_data netspace_v2_gpio_leds_data = { - .num_leds = ARRAY_SIZE(netspace_v2_gpio_led_pins), - .leds = netspace_v2_gpio_led_pins, -}; - -static struct platform_device netspace_v2_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &netspace_v2_gpio_leds_data, - }, -}; - -/***************************************************************************** - * Dual-GPIO CPLD LEDs - ****************************************************************************/ - -#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29 -#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30 - -static struct ns2_led netspace_v2_led_pins[] = { - { - .name = "ns_v2:blue:sata", - .cmd = NETSPACE_V2_GPIO_BLUE_LED_CMD, - .slow = NETSPACE_V2_GPIO_BLUE_LED_SLOW, - }, -}; - -static struct ns2_led_platform_data netspace_v2_leds_data = { - .num_leds = ARRAY_SIZE(netspace_v2_led_pins), - .leds = netspace_v2_led_pins, -}; - -static struct platform_device netspace_v2_leds = { - .name = "leds-ns2", - .id = -1, - .dev = { - .platform_data = &netspace_v2_leds_data, - }, -}; - -/***************************************************************************** - * GPIO fan - ****************************************************************************/ - -/* Designed for fan 40x40x16: ADDA AD0412LB-D50 6000rpm@12v */ -static struct gpio_fan_speed netspace_max_v2_fan_speed[] = { - { 0, 0 }, - { 1500, 15 }, - { 1700, 14 }, - { 1800, 13 }, - { 2100, 12 }, - { 3100, 11 }, - { 3300, 10 }, - { 4300, 9 }, - { 5500, 8 }, -}; - -static unsigned netspace_max_v2_fan_ctrl[] = { 22, 7, 33, 23 }; - -static struct gpio_fan_alarm netspace_max_v2_fan_alarm = { - .gpio = 25, - .active_low = 1, -}; - -static struct gpio_fan_platform_data netspace_max_v2_fan_data = { - .num_ctrl = ARRAY_SIZE(netspace_max_v2_fan_ctrl), - .ctrl = netspace_max_v2_fan_ctrl, - .alarm = &netspace_max_v2_fan_alarm, - .num_speed = ARRAY_SIZE(netspace_max_v2_fan_speed), - .speed = netspace_max_v2_fan_speed, -}; - -static struct platform_device netspace_max_v2_gpio_fan = { - .name = "gpio-fan", - .id = -1, - .dev = { - .platform_data = &netspace_max_v2_fan_data, - }, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static unsigned int netspace_v2_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Fan speed (bit 1) */ - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, /* Red led */ - MPP14_GPIO, /* USB fuse */ - MPP16_GPIO, /* SATA 0 power */ - MPP17_GPIO, /* SATA 1 power */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_GPIO, /* Fan speed (bit 0) */ - MPP23_GPIO, /* Fan power */ - MPP24_GPIO, /* USB mode select */ - MPP25_GPIO, /* Fan rotation fail */ - MPP26_GPIO, /* USB device vbus */ - MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* Blue led (slow register) */ - MPP30_GPIO, /* Blue led (command register) */ - MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ - MPP33_GPO, /* Fan speed (bit 2) */ - 0 -}; - -#define NETSPACE_V2_GPIO_POWER_OFF 31 - -static void netspace_v2_power_off(void) -{ - gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1); -} - -static void __init netspace_v2_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(netspace_v2_mpp_config); - - if (machine_is_netspace_max_v2()) - lacie_v2_hdd_power_init(2); - else - lacie_v2_hdd_power_init(1); - - kirkwood_ehci_init(); - kirkwood_ge00_init(&netspace_v2_ge00_data); - kirkwood_sata_init(&netspace_v2_sata_data); - kirkwood_uart0_init(); - lacie_v2_register_flash(); - lacie_v2_register_i2c_devices(); - - platform_device_register(&netspace_v2_leds); - platform_device_register(&netspace_v2_gpio_leds); - platform_device_register(&netspace_v2_gpio_buttons); - if (machine_is_netspace_max_v2()) - platform_device_register(&netspace_max_v2_gpio_fan); - - if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 && - gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0) - pm_power_off = netspace_v2_power_off; - else - pr_err("netspace_v2: failed to configure power-off GPIO\n"); -} - -#ifdef CONFIG_MACH_NETSPACE_V2 -MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") - .atag_offset = 0x100, - .init_machine = netspace_v2_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_INETSPACE_V2 -MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") - .atag_offset = 0x100, - .init_machine = netspace_v2_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_NETSPACE_MAX_V2 -MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") - .atag_offset = 0x100, - .init_machine = netspace_v2_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 6a6eb548307d10762b0f56307b81938842d180aa..e5cf841035832ec5f2163e36189f64aba5994c2b 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -158,7 +158,8 @@ static void __init openrd_init(void) kirkwood_mpp_conf(openrd_mpp_config); kirkwood_uart0_init(); - kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25); + kirkwood_nand_init(openrd_nand_parts, ARRAY_SIZE(openrd_nand_parts), + 25); kirkwood_ehci_init(); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index ddcb09f5bdd38403423f2123c329149b74848fd5..12d86f39f3807b1f2d5ed0274dd9960fd763e8a8 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -20,6 +20,16 @@ #include #include "common.h" +/* These can go away once Kirkwood uses the mvebu-mbus DT binding */ +#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET 0x4 +#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR 0xe8 +#define KIRKWOOD_MBUS_PCIE0_IO_TARGET 0x4 +#define KIRKWOOD_MBUS_PCIE0_IO_ATTR 0xe0 +#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET 0x4 +#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR 0xd8 +#define KIRKWOOD_MBUS_PCIE1_IO_TARGET 0x4 +#define KIRKWOOD_MBUS_PCIE1_IO_ATTR 0xd0 + static void kirkwood_enable_pcie_clk(const char *port) { struct clk *clk; @@ -254,26 +264,24 @@ static void __init add_pcie_port(int index, void __iomem *base) void __init kirkwood_pcie_init(unsigned int portmask) { - mvebu_mbus_add_window_remap_flags("pcie0.0", + mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET, + KIRKWOOD_MBUS_PCIE0_IO_ATTR, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE, - KIRKWOOD_PCIE_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pcie0.0", - KIRKWOOD_PCIE_MEM_PHYS_BASE, - KIRKWOOD_PCIE_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); - mvebu_mbus_add_window_remap_flags("pcie1.0", + KIRKWOOD_PCIE_IO_BUS_BASE); + mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET, + KIRKWOOD_MBUS_PCIE0_MEM_ATTR, + KIRKWOOD_PCIE_MEM_PHYS_BASE, + KIRKWOOD_PCIE_MEM_SIZE); + mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET, + KIRKWOOD_MBUS_PCIE1_IO_ATTR, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE, - KIRKWOOD_PCIE1_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pcie1.0", - KIRKWOOD_PCIE1_MEM_PHYS_BASE, - KIRKWOOD_PCIE1_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); + KIRKWOOD_PCIE1_IO_BUS_BASE); + mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET, + KIRKWOOD_MBUS_PCIE1_MEM_ATTR, + KIRKWOOD_PCIE1_MEM_PHYS_BASE, + KIRKWOOD_PCIE1_MEM_SIZE); vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE; diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index d24223166e06c60e5d9631d6f8818f44bfb0fc5b..5154bd2a3ad3d581d727f946f08e83378d7e80a9 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -87,7 +87,9 @@ static void __init rd88f6281_init(void) kirkwood_init(); kirkwood_mpp_conf(rd88f6281_mpp_config); - kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25); + kirkwood_nand_init(rd88f6281_nand_parts, + ARRAY_SIZE(rd88f6281_nand_parts), + 25); kirkwood_ehci_init(); kirkwood_ge00_init(&rd88f6281_ge00_data); diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c deleted file mode 100644 index 55b68fa39f45aa63cab6f4829e11fb6de57b308c..0000000000000000000000000000000000000000 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * arch/arm/mach-kirkwood/sheevaplug-setup.c - * - * Marvell SheevaPlug Reference Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "mpp.h" - -static struct mtd_partition sheevaplug_nand_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_1M - }, { - .name = "uImage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_4M - }, { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - }, -}; - -static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv_sata_platform_data sheeva_esata_sata_data = { - .n_ports = 2, -}; - -static struct mvsdio_platform_data sheevaplug_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ -}; - -static struct mvsdio_platform_data sheeva_esata_mvsdio_data = { - .gpio_write_protect = 44, /* MPP44 used as SD write protect */ - .gpio_card_detect = 47, /* MPP47 used as SD card detect */ -}; - -static struct gpio_led sheevaplug_led_pins[] = { - { - .name = "plug:red:misc", - .default_trigger = "none", - .gpio = 46, - .active_low = 1, - }, - { - .name = "plug:green:health", - .default_trigger = "default-on", - .gpio = 49, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data sheevaplug_led_data = { - .leds = sheevaplug_led_pins, - .num_leds = ARRAY_SIZE(sheevaplug_led_pins), -}; - -static struct platform_device sheevaplug_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &sheevaplug_led_data, - } -}; - -static unsigned int sheevaplug_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP46_GPIO, /* LED Red */ - MPP49_GPIO, /* LED */ - 0 -}; - -static unsigned int sheeva_esata_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP44_GPIO, /* SD Write Protect */ - MPP47_GPIO, /* SD Card Detect */ - MPP49_GPIO, /* LED Green */ - 0 -}; - -static void __init sheevaplug_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - - /* setup gpio pin select */ - if (machine_is_esata_sheevaplug()) - kirkwood_mpp_conf(sheeva_esata_mpp_config); - else - kirkwood_mpp_conf(sheevaplug_mpp_config); - - kirkwood_uart0_init(); - kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25); - - if (gpio_request(29, "USB Power Enable") != 0 || - gpio_direction_output(29, 1) != 0) - pr_err("can't set up GPIO 29 (USB Power Enable)\n"); - kirkwood_ehci_init(); - - kirkwood_ge00_init(&sheevaplug_ge00_data); - - /* honor lower power consumption for plugs with out eSATA */ - if (machine_is_esata_sheevaplug()) - kirkwood_sata_init(&sheeva_esata_sata_data); - - /* enable sd wp and sd cd on plugs with esata */ - if (machine_is_esata_sheevaplug()) - kirkwood_sdio_init(&sheeva_esata_mvsdio_data); - else - kirkwood_sdio_init(&sheevaplug_mvsdio_data); - - platform_device_register(&sheevaplug_leds); -} - -#ifdef CONFIG_MACH_SHEEVAPLUG -MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") - /* Maintainer: shadi Ammouri */ - .atag_offset = 0x100, - .init_machine = sheevaplug_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG -MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board") - .atag_offset = 0x100, - .init_machine = sheevaplug_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index 456d6386edf8b5f34e80f3b25de4605e18269ad2..9f9c0441a9175d970184977340988415f1dbb354 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S deleted file mode 100644 index 351bd6c849099d900dd748ac9f384c77215ecc83..0000000000000000000000000000000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/debug-macro.S - * - * Author: Kevin Wells - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * Debug output is hardcoded to standard UART 5 -*/ - - .macro addruart, rp, rv, tmp - ldreq \rp, =0x40090000 - ldrne \rv, =0xF4090000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 8483906d43085e59ea37541869811379ce75ad4b..702232996c8c36ffc3b86e01d58807c2561c1282 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index d257ff40e16b4a962f929b3c3067939760b0563c..d872634c2f85f32b6f4944233232734ebe325ebf 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,17 +1,16 @@ -obj-y += io.o timer.o +obj-y += timer.o obj-y += clock.o obj-$(CONFIG_MSM_VIC) += irq-vic.o -obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o obj-$(CONFIG_ARCH_MSM7X00A) += irq.o obj-$(CONFIG_ARCH_QSD8X50) += sirc.o obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o -obj-$(CONFIG_ARCH_MSM7X00A) += dma.o -obj-$(CONFIG_ARCH_MSM7X30) += dma.o -obj-$(CONFIG_ARCH_QSD8X50) += dma.o +obj-$(CONFIG_ARCH_MSM7X00A) += dma.o io.o +obj-$(CONFIG_ARCH_MSM7X30) += dma.o io.o +obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c index 492f5cd87b0a74d7ba3fd02545adf7a7297f656b..c2946892f5e3923a45c46fec8338a4319bca157f 100644 --- a/arch/arm/mach-msm/board-dt-8660.c +++ b/arch/arm/mach-msm/board-dt-8660.c @@ -15,8 +15,8 @@ #include #include +#include -#include #include "common.h" static void __init msm8x60_init_late(void) @@ -42,9 +42,7 @@ static const char *msm8x60_fluid_match[] __initdata = { DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") .smp = smp_ops(msm_smp_ops), - .map_io = msm_map_msm8x60_io, .init_machine = msm8x60_dt_init, .init_late = msm8x60_init_late, - .init_time = msm_dt_timer_init, .dt_compat = msm8x60_fluid_match, MACHINE_END diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt-8960.c index bb5530957c4fcfd4d0fc0086d3b162ff69438644..d4ca52c45111bb719d2a8a01ddb732e7265b60d7 100644 --- a/arch/arm/mach-msm/board-dt-8960.c +++ b/arch/arm/mach-msm/board-dt-8960.c @@ -14,6 +14,7 @@ #include #include +#include #include "common.h" @@ -29,8 +30,6 @@ static const char * const msm8960_dt_match[] __initconst = { DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)") .smp = smp_ops(msm_smp_ops), - .map_io = msm_map_msm8960_io, - .init_time = msm_dt_timer_init, .init_machine = msm_dt_init, .dt_compat = msm8960_dt_match, MACHINE_END diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 803651ad4f62956e1850447534deafe2c837e0de..a77529887cbcac04a488ffccd1ae7afcbcad3e4d 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -29,7 +29,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c index 30c3496db59372fd89c89d3430564db967bb4aee..7d9981cb400e95abf518eb172e0c313f5cfa3ee3 100644 --- a/arch/arm/mach-msm/board-mahimahi.c +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -28,12 +28,12 @@ #include #include -#include #include #include "board-mahimahi.h" #include "devices.h" #include "proc_comm.h" +#include "common.h" static uint debug_uart; diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index db3d8c0bc8a4315411c94a205c7f51265ec35d81..f9af5a46e8b684b0e2f2126f0a7abc7e665e02bf 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -30,7 +30,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index f14a73d86bc06e21243c268d87c5adfa230073dc..5f933bc507838e10cb408e5088b06b706d1894b7 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -28,7 +28,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 70730111b37c033c999358ecb144b496fb6f19e8..327605174d6349eb4c09700b6729500eb344501e 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include @@ -41,6 +40,7 @@ #include "board-sapphire.h" #include "proc_comm.h" #include "devices.h" +#include "common.h" void msm_init_irq(void); void msm_init_gpio(void); diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 64a46eb4fc494cebf38bbc9a33427e57ff820cba..ccf6621bc664e4403e953a2cbb99c44048d8d37d 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -25,7 +25,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h index 651851c3e1dd14d21ef24c497667dbe2f5d5828d..b2379ede43bcfc0d844ae25fe6a3ec925008b606 100644 --- a/arch/arm/mach-msm/board-trout.h +++ b/arch/arm/mach-msm/board-trout.h @@ -4,7 +4,7 @@ #ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H #define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H -#include +#include "common.h" #define MSM_SMI_BASE 0x00000000 #define MSM_SMI_SIZE 0x00800000 diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h index 421cf7751a803162a6d6a1c37dda3bb95ccbd681..33c7725adae2ffd5f885011c2bcd549030c159fd 100644 --- a/arch/arm/mach-msm/common.h +++ b/arch/arm/mach-msm/common.h @@ -14,13 +14,10 @@ extern void msm7x01_timer_init(void); extern void msm7x30_timer_init(void); -extern void msm_dt_timer_init(void); extern void qsd8x50_timer_init(void); extern void msm_map_common_io(void); extern void msm_map_msm7x30_io(void); -extern void msm_map_msm8x60_io(void); -extern void msm_map_msm8960_io(void); extern void msm_map_qsd8x50_io(void); extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size, @@ -29,4 +26,19 @@ extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size, extern struct smp_operations msm_smp_ops; extern void msm_cpu_die(unsigned int cpu); +struct msm_mmc_platform_data; + +extern void msm_add_devices(void); +extern void msm_init_irq(void); +extern void msm_init_gpio(void); +extern int msm_add_sdcc(unsigned int controller, + struct msm_mmc_platform_data *plat, + unsigned int stat_irq, unsigned long stat_irq_flags); + +#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS) +extern int smd_debugfs_init(void); +#else +static inline int smd_debugfs_init(void) { return 0; } +#endif + #endif diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c deleted file mode 100644 index 0fb7a17df3987e259297d21de210971d2f65fb80..0000000000000000000000000000000000000000 --- a/arch/arm/mach-msm/devices-iommu.c +++ /dev/null @@ -1,912 +0,0 @@ -/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include - -static struct resource msm_iommu_jpegd_resources[] = { - { - .start = 0x07300000, - .end = 0x07300000 + SZ_1M - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ, - .end = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_JPEGD_CB_SC_SECURE_IRQ, - .end = SMMU_JPEGD_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_vpe_resources[] = { - { - .start = 0x07400000, - .end = 0x07400000 + SZ_1M - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_VPE_CB_SC_NON_SECURE_IRQ, - .end = SMMU_VPE_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_VPE_CB_SC_SECURE_IRQ, - .end = SMMU_VPE_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_mdp0_resources[] = { - { - .start = 0x07500000, - .end = 0x07500000 + SZ_1M - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_MDP0_CB_SC_NON_SECURE_IRQ, - .end = SMMU_MDP0_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_MDP0_CB_SC_SECURE_IRQ, - .end = SMMU_MDP0_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_mdp1_resources[] = { - { - .start = 0x07600000, - .end = 0x07600000 + SZ_1M - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_MDP1_CB_SC_NON_SECURE_IRQ, - .end = SMMU_MDP1_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_MDP1_CB_SC_SECURE_IRQ, - .end = SMMU_MDP1_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_rot_resources[] = { - { - .start = 0x07700000, - .end = 0x07700000 + SZ_1M - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_ROT_CB_SC_NON_SECURE_IRQ, - .end = SMMU_ROT_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_ROT_CB_SC_SECURE_IRQ, - .end = SMMU_ROT_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_ijpeg_resources[] = { - { - .start = 0x07800000, - .end = 0x07800000 + SZ_1M - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ, - .end = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_IJPEG_CB_SC_SECURE_IRQ, - .end = SMMU_IJPEG_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_vfe_resources[] = { - { - .start = 0x07900000, - .end = 0x07900000 + SZ_1M - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_VFE_CB_SC_NON_SECURE_IRQ, - .end = SMMU_VFE_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_VFE_CB_SC_SECURE_IRQ, - .end = SMMU_VFE_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_vcodec_a_resources[] = { - { - .start = 0x07A00000, - .end = 0x07A00000 + SZ_1M - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ, - .end = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_VCODEC_A_CB_SC_SECURE_IRQ, - .end = SMMU_VCODEC_A_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_vcodec_b_resources[] = { - { - .start = 0x07B00000, - .end = 0x07B00000 + SZ_1M - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ, - .end = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_VCODEC_B_CB_SC_SECURE_IRQ, - .end = SMMU_VCODEC_B_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_gfx3d_resources[] = { - { - .start = 0x07C00000, - .end = 0x07C00000 + SZ_1M - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ, - .end = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_GFX3D_CB_SC_SECURE_IRQ, - .end = SMMU_GFX3D_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_gfx2d0_resources[] = { - { - .start = 0x07D00000, - .end = 0x07D00000 + SZ_1M - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ, - .end = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_GFX2D0_CB_SC_SECURE_IRQ, - .end = SMMU_GFX2D0_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_gfx2d1_resources[] = { - { - .start = 0x07E00000, - .end = 0x07E00000 + SZ_1M - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ, - .end = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_GFX2D1_CB_SC_SECURE_IRQ, - .end = SMMU_GFX2D1_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device msm_root_iommu_dev = { - .name = "msm_iommu", - .id = -1, -}; - -static struct msm_iommu_dev jpegd_iommu = { - .name = "jpegd", - .ncb = 2, -}; - -static struct msm_iommu_dev vpe_iommu = { - .name = "vpe", - .ncb = 2, -}; - -static struct msm_iommu_dev mdp0_iommu = { - .name = "mdp0", - .ncb = 2, -}; - -static struct msm_iommu_dev mdp1_iommu = { - .name = "mdp1", - .ncb = 2, -}; - -static struct msm_iommu_dev rot_iommu = { - .name = "rot", - .ncb = 2, -}; - -static struct msm_iommu_dev ijpeg_iommu = { - .name = "ijpeg", - .ncb = 2, -}; - -static struct msm_iommu_dev vfe_iommu = { - .name = "vfe", - .ncb = 2, -}; - -static struct msm_iommu_dev vcodec_a_iommu = { - .name = "vcodec_a", - .ncb = 2, -}; - -static struct msm_iommu_dev vcodec_b_iommu = { - .name = "vcodec_b", - .ncb = 2, -}; - -static struct msm_iommu_dev gfx3d_iommu = { - .name = "gfx3d", - .ncb = 3, -}; - -static struct msm_iommu_dev gfx2d0_iommu = { - .name = "gfx2d0", - .ncb = 2, -}; - -static struct msm_iommu_dev gfx2d1_iommu = { - .name = "gfx2d1", - .ncb = 2, -}; - -static struct platform_device msm_device_iommu_jpegd = { - .name = "msm_iommu", - .id = 0, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_jpegd_resources), - .resource = msm_iommu_jpegd_resources, -}; - -static struct platform_device msm_device_iommu_vpe = { - .name = "msm_iommu", - .id = 1, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_vpe_resources), - .resource = msm_iommu_vpe_resources, -}; - -static struct platform_device msm_device_iommu_mdp0 = { - .name = "msm_iommu", - .id = 2, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_mdp0_resources), - .resource = msm_iommu_mdp0_resources, -}; - -static struct platform_device msm_device_iommu_mdp1 = { - .name = "msm_iommu", - .id = 3, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_mdp1_resources), - .resource = msm_iommu_mdp1_resources, -}; - -static struct platform_device msm_device_iommu_rot = { - .name = "msm_iommu", - .id = 4, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_rot_resources), - .resource = msm_iommu_rot_resources, -}; - -static struct platform_device msm_device_iommu_ijpeg = { - .name = "msm_iommu", - .id = 5, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_ijpeg_resources), - .resource = msm_iommu_ijpeg_resources, -}; - -static struct platform_device msm_device_iommu_vfe = { - .name = "msm_iommu", - .id = 6, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_vfe_resources), - .resource = msm_iommu_vfe_resources, -}; - -static struct platform_device msm_device_iommu_vcodec_a = { - .name = "msm_iommu", - .id = 7, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_vcodec_a_resources), - .resource = msm_iommu_vcodec_a_resources, -}; - -static struct platform_device msm_device_iommu_vcodec_b = { - .name = "msm_iommu", - .id = 8, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_vcodec_b_resources), - .resource = msm_iommu_vcodec_b_resources, -}; - -static struct platform_device msm_device_iommu_gfx3d = { - .name = "msm_iommu", - .id = 9, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_gfx3d_resources), - .resource = msm_iommu_gfx3d_resources, -}; - -static struct platform_device msm_device_iommu_gfx2d0 = { - .name = "msm_iommu", - .id = 10, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_gfx2d0_resources), - .resource = msm_iommu_gfx2d0_resources, -}; - -struct platform_device msm_device_iommu_gfx2d1 = { - .name = "msm_iommu", - .id = 11, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_gfx2d1_resources), - .resource = msm_iommu_gfx2d1_resources, -}; - -static struct msm_iommu_ctx_dev jpegd_src_ctx = { - .name = "jpegd_src", - .num = 0, - .mids = {0, -1} -}; - -static struct msm_iommu_ctx_dev jpegd_dst_ctx = { - .name = "jpegd_dst", - .num = 1, - .mids = {1, -1} -}; - -static struct msm_iommu_ctx_dev vpe_src_ctx = { - .name = "vpe_src", - .num = 0, - .mids = {0, -1} -}; - -static struct msm_iommu_ctx_dev vpe_dst_ctx = { - .name = "vpe_dst", - .num = 1, - .mids = {1, -1} -}; - -static struct msm_iommu_ctx_dev mdp_vg1_ctx = { - .name = "mdp_vg1", - .num = 0, - .mids = {0, 2, -1} -}; - -static struct msm_iommu_ctx_dev mdp_rgb1_ctx = { - .name = "mdp_rgb1", - .num = 1, - .mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1} -}; - -static struct msm_iommu_ctx_dev mdp_vg2_ctx = { - .name = "mdp_vg2", - .num = 0, - .mids = {0, 2, -1} -}; - -static struct msm_iommu_ctx_dev mdp_rgb2_ctx = { - .name = "mdp_rgb2", - .num = 1, - .mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1} -}; - -static struct msm_iommu_ctx_dev rot_src_ctx = { - .name = "rot_src", - .num = 0, - .mids = {0, -1} -}; - -static struct msm_iommu_ctx_dev rot_dst_ctx = { - .name = "rot_dst", - .num = 1, - .mids = {1, -1} -}; - -static struct msm_iommu_ctx_dev ijpeg_src_ctx = { - .name = "ijpeg_src", - .num = 0, - .mids = {0, -1} -}; - -static struct msm_iommu_ctx_dev ijpeg_dst_ctx = { - .name = "ijpeg_dst", - .num = 1, - .mids = {1, -1} -}; - -static struct msm_iommu_ctx_dev vfe_imgwr_ctx = { - .name = "vfe_imgwr", - .num = 0, - .mids = {2, 3, 4, 5, 6, 7, 8, -1} -}; - -static struct msm_iommu_ctx_dev vfe_misc_ctx = { - .name = "vfe_misc", - .num = 1, - .mids = {0, 1, 9, -1} -}; - -static struct msm_iommu_ctx_dev vcodec_a_stream_ctx = { - .name = "vcodec_a_stream", - .num = 0, - .mids = {2, 5, -1} -}; - -static struct msm_iommu_ctx_dev vcodec_a_mm1_ctx = { - .name = "vcodec_a_mm1", - .num = 1, - .mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1} -}; - -static struct msm_iommu_ctx_dev vcodec_b_mm2_ctx = { - .name = "vcodec_b_mm2", - .num = 0, - .mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1} -}; - -static struct msm_iommu_ctx_dev gfx3d_user_ctx = { - .name = "gfx3d_user", - .num = 0, - .mids = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1} -}; - -static struct msm_iommu_ctx_dev gfx3d_priv_ctx = { - .name = "gfx3d_priv", - .num = 1, - .mids = {16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, - 31, -1} -}; - -static struct msm_iommu_ctx_dev gfx2d0_2d0_ctx = { - .name = "gfx2d0_2d0", - .num = 0, - .mids = {0, 1, 2, 3, 4, 5, 6, 7, -1} -}; - -static struct msm_iommu_ctx_dev gfx2d1_2d1_ctx = { - .name = "gfx2d1_2d1", - .num = 0, - .mids = {0, 1, 2, 3, 4, 5, 6, 7, -1} -}; - -static struct platform_device msm_device_jpegd_src_ctx = { - .name = "msm_iommu_ctx", - .id = 0, - .dev = { - .parent = &msm_device_iommu_jpegd.dev, - }, -}; - -static struct platform_device msm_device_jpegd_dst_ctx = { - .name = "msm_iommu_ctx", - .id = 1, - .dev = { - .parent = &msm_device_iommu_jpegd.dev, - }, -}; - -static struct platform_device msm_device_vpe_src_ctx = { - .name = "msm_iommu_ctx", - .id = 2, - .dev = { - .parent = &msm_device_iommu_vpe.dev, - }, -}; - -static struct platform_device msm_device_vpe_dst_ctx = { - .name = "msm_iommu_ctx", - .id = 3, - .dev = { - .parent = &msm_device_iommu_vpe.dev, - }, -}; - -static struct platform_device msm_device_mdp_vg1_ctx = { - .name = "msm_iommu_ctx", - .id = 4, - .dev = { - .parent = &msm_device_iommu_mdp0.dev, - }, -}; - -static struct platform_device msm_device_mdp_rgb1_ctx = { - .name = "msm_iommu_ctx", - .id = 5, - .dev = { - .parent = &msm_device_iommu_mdp0.dev, - }, -}; - -static struct platform_device msm_device_mdp_vg2_ctx = { - .name = "msm_iommu_ctx", - .id = 6, - .dev = { - .parent = &msm_device_iommu_mdp1.dev, - }, -}; - -static struct platform_device msm_device_mdp_rgb2_ctx = { - .name = "msm_iommu_ctx", - .id = 7, - .dev = { - .parent = &msm_device_iommu_mdp1.dev, - }, -}; - -static struct platform_device msm_device_rot_src_ctx = { - .name = "msm_iommu_ctx", - .id = 8, - .dev = { - .parent = &msm_device_iommu_rot.dev, - }, -}; - -static struct platform_device msm_device_rot_dst_ctx = { - .name = "msm_iommu_ctx", - .id = 9, - .dev = { - .parent = &msm_device_iommu_rot.dev, - }, -}; - -static struct platform_device msm_device_ijpeg_src_ctx = { - .name = "msm_iommu_ctx", - .id = 10, - .dev = { - .parent = &msm_device_iommu_ijpeg.dev, - }, -}; - -static struct platform_device msm_device_ijpeg_dst_ctx = { - .name = "msm_iommu_ctx", - .id = 11, - .dev = { - .parent = &msm_device_iommu_ijpeg.dev, - }, -}; - -static struct platform_device msm_device_vfe_imgwr_ctx = { - .name = "msm_iommu_ctx", - .id = 12, - .dev = { - .parent = &msm_device_iommu_vfe.dev, - }, -}; - -static struct platform_device msm_device_vfe_misc_ctx = { - .name = "msm_iommu_ctx", - .id = 13, - .dev = { - .parent = &msm_device_iommu_vfe.dev, - }, -}; - -static struct platform_device msm_device_vcodec_a_stream_ctx = { - .name = "msm_iommu_ctx", - .id = 14, - .dev = { - .parent = &msm_device_iommu_vcodec_a.dev, - }, -}; - -static struct platform_device msm_device_vcodec_a_mm1_ctx = { - .name = "msm_iommu_ctx", - .id = 15, - .dev = { - .parent = &msm_device_iommu_vcodec_a.dev, - }, -}; - -static struct platform_device msm_device_vcodec_b_mm2_ctx = { - .name = "msm_iommu_ctx", - .id = 16, - .dev = { - .parent = &msm_device_iommu_vcodec_b.dev, - }, -}; - -static struct platform_device msm_device_gfx3d_user_ctx = { - .name = "msm_iommu_ctx", - .id = 17, - .dev = { - .parent = &msm_device_iommu_gfx3d.dev, - }, -}; - -static struct platform_device msm_device_gfx3d_priv_ctx = { - .name = "msm_iommu_ctx", - .id = 18, - .dev = { - .parent = &msm_device_iommu_gfx3d.dev, - }, -}; - -static struct platform_device msm_device_gfx2d0_2d0_ctx = { - .name = "msm_iommu_ctx", - .id = 19, - .dev = { - .parent = &msm_device_iommu_gfx2d0.dev, - }, -}; - -static struct platform_device msm_device_gfx2d1_2d1_ctx = { - .name = "msm_iommu_ctx", - .id = 20, - .dev = { - .parent = &msm_device_iommu_gfx2d1.dev, - }, -}; - -static struct platform_device *msm_iommu_devs[] = { - &msm_device_iommu_jpegd, - &msm_device_iommu_vpe, - &msm_device_iommu_mdp0, - &msm_device_iommu_mdp1, - &msm_device_iommu_rot, - &msm_device_iommu_ijpeg, - &msm_device_iommu_vfe, - &msm_device_iommu_vcodec_a, - &msm_device_iommu_vcodec_b, - &msm_device_iommu_gfx3d, - &msm_device_iommu_gfx2d0, - &msm_device_iommu_gfx2d1, -}; - -static struct msm_iommu_dev *msm_iommu_data[] = { - &jpegd_iommu, - &vpe_iommu, - &mdp0_iommu, - &mdp1_iommu, - &rot_iommu, - &ijpeg_iommu, - &vfe_iommu, - &vcodec_a_iommu, - &vcodec_b_iommu, - &gfx3d_iommu, - &gfx2d0_iommu, - &gfx2d1_iommu, -}; - -static struct platform_device *msm_iommu_ctx_devs[] = { - &msm_device_jpegd_src_ctx, - &msm_device_jpegd_dst_ctx, - &msm_device_vpe_src_ctx, - &msm_device_vpe_dst_ctx, - &msm_device_mdp_vg1_ctx, - &msm_device_mdp_rgb1_ctx, - &msm_device_mdp_vg2_ctx, - &msm_device_mdp_rgb2_ctx, - &msm_device_rot_src_ctx, - &msm_device_rot_dst_ctx, - &msm_device_ijpeg_src_ctx, - &msm_device_ijpeg_dst_ctx, - &msm_device_vfe_imgwr_ctx, - &msm_device_vfe_misc_ctx, - &msm_device_vcodec_a_stream_ctx, - &msm_device_vcodec_a_mm1_ctx, - &msm_device_vcodec_b_mm2_ctx, - &msm_device_gfx3d_user_ctx, - &msm_device_gfx3d_priv_ctx, - &msm_device_gfx2d0_2d0_ctx, - &msm_device_gfx2d1_2d1_ctx, -}; - -static struct msm_iommu_ctx_dev *msm_iommu_ctx_data[] = { - &jpegd_src_ctx, - &jpegd_dst_ctx, - &vpe_src_ctx, - &vpe_dst_ctx, - &mdp_vg1_ctx, - &mdp_rgb1_ctx, - &mdp_vg2_ctx, - &mdp_rgb2_ctx, - &rot_src_ctx, - &rot_dst_ctx, - &ijpeg_src_ctx, - &ijpeg_dst_ctx, - &vfe_imgwr_ctx, - &vfe_misc_ctx, - &vcodec_a_stream_ctx, - &vcodec_a_mm1_ctx, - &vcodec_b_mm2_ctx, - &gfx3d_user_ctx, - &gfx3d_priv_ctx, - &gfx2d0_2d0_ctx, - &gfx2d1_2d1_ctx, -}; - -static int __init msm8x60_iommu_init(void) -{ - int ret, i; - - ret = platform_device_register(&msm_root_iommu_dev); - if (ret != 0) { - pr_err("Failed to register root IOMMU device!\n"); - goto failure; - } - - for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); i++) { - ret = platform_device_add_data(msm_iommu_devs[i], - msm_iommu_data[i], - sizeof(struct msm_iommu_dev)); - if (ret != 0) { - pr_err("platform_device_add_data failed, " - "i = %d\n", i); - goto failure_unwind; - } - - ret = platform_device_register(msm_iommu_devs[i]); - - if (ret != 0) { - pr_err("platform_device_register iommu failed, " - "i = %d\n", i); - goto failure_unwind; - } - } - - for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) { - ret = platform_device_add_data(msm_iommu_ctx_devs[i], - msm_iommu_ctx_data[i], - sizeof(*msm_iommu_ctx_devs[i])); - if (ret != 0) { - pr_err("platform_device_add_data iommu failed, " - "i = %d\n", i); - goto failure_unwind2; - } - - ret = platform_device_register(msm_iommu_ctx_devs[i]); - if (ret != 0) { - pr_err("platform_device_register ctx failed, " - "i = %d\n", i); - goto failure_unwind2; - } - } - return 0; - -failure_unwind2: - while (--i >= 0) - platform_device_unregister(msm_iommu_ctx_devs[i]); -failure_unwind: - while (--i >= 0) - platform_device_unregister(msm_iommu_devs[i]); - - platform_device_unregister(&msm_root_iommu_dev); -failure: - return ret; -} - -static void __exit msm8x60_iommu_exit(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) - platform_device_unregister(msm_iommu_ctx_devs[i]); - - for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); ++i) - platform_device_unregister(msm_iommu_devs[i]); - - platform_device_unregister(&msm_root_iommu_dev); -} - -subsys_initcall(msm8x60_iommu_init); -module_exit(msm8x60_iommu_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Stepan Moskovchenko "); diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index 6d50fb96486345b3e7dceb4275cedaada92591b2..d83404d4b3280b681b412bf90d4a120c7a566c94 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -456,9 +456,9 @@ static struct clk_pcom_desc msm_clocks_7x01a[] = { CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART1_CLK, "msm_serial.0", OFF), - CLK_PCOM("uart_clk", UART2_CLK, "msm_serial.1", 0), - CLK_PCOM("uart_clk", UART3_CLK, "msm_serial.2", OFF), + CLK_PCOM("core", UART1_CLK, "msm_serial.0", OFF), + CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0), + CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF), CLK_PCOM("uart1dm_clk", UART1DM_CLK, NULL, OFF), CLK_PCOM("uart2dm_clk", UART2DM_CLK, NULL, 0), CLK_PCOM("usb_hs_clk", USB_HS_CLK, "msm_hsusb", OFF), diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index d4db75acff569a7adffca73e1ef55368c49b0e9b..c15ea8ab20a7204d7aaea51fa762b57c35495f9c 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -21,10 +21,10 @@ #include #include #include -#include #include "devices.h" #include "smd_private.h" +#include "common.h" #include @@ -211,7 +211,7 @@ static struct clk_pcom_desc msm_clocks_7x30[] = { CLK_PCOM("spi_pclk", SPI_P_CLK, NULL, 0), CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART2_CLK, "msm_serial.1", 0), + CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0), CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0), CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF), CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF), diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index f5518112284b9a67895093a625ec32263706aea0..9e1e9ce07b1a26deaf8285f0d80931cc51f2680b 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -21,9 +21,9 @@ #include #include #include -#include #include "devices.h" +#include "common.h" #include @@ -358,9 +358,9 @@ static struct clk_pcom_desc msm_clocks_8x50[] = { CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART1_CLK, NULL, OFF), - CLK_PCOM("uart_clk", UART2_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART3_CLK, "msm_serial.2", OFF), + CLK_PCOM("core", UART1_CLK, NULL, OFF), + CLK_PCOM("core", UART2_CLK, NULL, 0), + CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF), CLK_PCOM("uartdm_clk", UART1DM_CLK, NULL, OFF), CLK_PCOM("uartdm_clk", UART2DM_CLK, NULL, 0), CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF), diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h deleted file mode 100644 index c34e246a3e07dab6cae666d4b6f028d2f6840182..0000000000000000000000000000000000000000 --- a/arch/arm/mach-msm/include/mach/board.h +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-msm/include/mach/board.h - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_BOARD_H -#define __ASM_ARCH_MSM_BOARD_H - -#include -#include - -/* common init routines for use by arch/arm/mach-msm/board-*.c */ - -void __init msm_add_devices(void); -void __init msm_init_irq(void); -void __init msm_init_gpio(void); -int __init msm_add_sdcc(unsigned int controller, - struct msm_mmc_platform_data *plat, - unsigned int stat_irq, unsigned long stat_irq_flags); - -#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS) -int smd_debugfs_init(void); -#else -static inline int smd_debugfs_init(void) { return 0; } -#endif - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h deleted file mode 100644 index 7bca8d7108d687f70ff0f532654d09ec45af0db1..0000000000000000000000000000000000000000 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * The MSM peripherals are spread all over across 768MB of physical - * space, which makes just having a simple IO_ADDRESS macro to slide - * them into the right virtual location rough. Instead, we will - * provide a master phys->virt mapping for peripherals here. - * - */ - -#ifndef __ASM_ARCH_MSM_IOMAP_8960_H -#define __ASM_ARCH_MSM_IOMAP_8960_H - -/* Physical base address and size of peripherals. - * Ordered by the virtual base addresses they will be mapped at. - * - * If you add or remove entries here, you'll want to edit the - * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your - * changes. - * - */ - -#define MSM8960_TMR_PHYS 0x0200A000 -#define MSM8960_TMR_SIZE SZ_4K - -#define MSM8960_TMR0_PHYS 0x0208A000 -#define MSM8960_TMR0_SIZE SZ_4K - -#ifdef CONFIG_DEBUG_MSM8960_UART -#define MSM_DEBUG_UART_BASE 0xF0040000 -#define MSM_DEBUG_UART_PHYS 0x16440000 -#endif - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h deleted file mode 100644 index 75a7b62c1c7439033bbac975b8f2147503c30f33..0000000000000000000000000000000000000000 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * The MSM peripherals are spread all over across 768MB of physical - * space, which makes just having a simple IO_ADDRESS macro to slide - * them into the right virtual location rough. Instead, we will - * provide a master phys->virt mapping for peripherals here. - * - */ - -#ifndef __ASM_ARCH_MSM_IOMAP_8X60_H -#define __ASM_ARCH_MSM_IOMAP_8X60_H - -/* Physical base address and size of peripherals. - * Ordered by the virtual base addresses they will be mapped at. - * - * MSM_VIC_BASE must be an value that can be loaded via a "mov" - * instruction, otherwise entry-macro.S will not compile. - * - * If you add or remove entries here, you'll want to edit the - * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your - * changes. - * - */ - -#define MSM_TLMM_BASE IOMEM(0xF0004000) -#define MSM_TLMM_PHYS 0x00800000 -#define MSM_TLMM_SIZE SZ_16K - -#define MSM8X60_TMR_PHYS 0x02000000 -#define MSM8X60_TMR_SIZE SZ_4K - -#define MSM8X60_TMR0_PHYS 0x02040000 -#define MSM8X60_TMR0_SIZE SZ_4K - -#ifdef CONFIG_DEBUG_MSM8660_UART -#define MSM_DEBUG_UART_BASE 0xF0040000 -#define MSM_DEBUG_UART_PHYS 0x19C40000 -#endif - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index c56e81ffdcdead314be34247d2fd040f4b20a399..0e4f49157684acde804d49e877fd82a6a18cd759 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -45,25 +45,8 @@ #include "msm_iomap-7x00.h" #endif -#include "msm_iomap-8x60.h" -#include "msm_iomap-8960.h" - -#define MSM_DEBUG_UART_SIZE SZ_4K -#if defined(CONFIG_DEBUG_MSM_UART1) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS -#elif defined(CONFIG_DEBUG_MSM_UART2) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS -#elif defined(CONFIG_DEBUG_MSM_UART3) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS -#endif - /* Virtual addresses shared across all MSM targets. */ #define MSM_CSR_BASE IOMEM(0xE0001000) -#define MSM_TMR_BASE IOMEM(0xF0200000) -#define MSM_TMR0_BASE IOMEM(0xF0201000) #define MSM_GPIO1_BASE IOMEM(0xE0003000) #define MSM_GPIO2_BASE IOMEM(0xE0004000) diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h deleted file mode 100644 index 94324870fb04ad19ff60cc43bd23dbcdcaf37ca8..0000000000000000000000000000000000000000 --- a/arch/arm/mach-msm/include/mach/uncompress.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H -#define __ASM_ARCH_MSM_UNCOMPRESS_H - -#include -#include -#include - -#define UART_CSR (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08)) -#define UART_TF (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x0c)) - -#define UART_DM_SR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08))) -#define UART_DM_CR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x10))) -#define UART_DM_ISR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x14))) -#define UART_DM_NCHAR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x40))) -#define UART_DM_TF (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x70))) - -static void putc(int c) -{ -#if defined(MSM_DEBUG_UART_PHYS) -#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS - /* - * Wait for TX_READY to be set; but skip it if we have a - * TX underrun. - */ - if (!(UART_DM_SR & 0x08)) - while (!(UART_DM_ISR & 0x80)) - cpu_relax(); - - UART_DM_CR = 0x300; - UART_DM_NCHAR = 0x1; - UART_DM_TF = c; -#else - while (!(UART_CSR & 0x04)) - cpu_relax(); - UART_TF = c; -#endif -#endif -} - -static inline void flush(void) -{ -} - -static inline void arch_decomp_setup(void) -{ -} - -#endif diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 3dc04ccaf59f15973f5719e491fd3b4a4aa96539..adc8971c726640444d3fa7e14decd81ccac4d750 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -18,6 +18,7 @@ */ #include +#include #include #include #include @@ -27,8 +28,6 @@ #include #include -#include - #include "common.h" #define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) { \ @@ -52,26 +51,38 @@ static struct map_desc msm_io_desc[] __initdata = { MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED), MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED), MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED), -#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ - defined(CONFIG_DEBUG_MSM_UART3) - MSM_DEVICE_TYPE(DEBUG_UART, MT_DEVICE_NONSHARED), -#endif { .virtual = (unsigned long) MSM_SHARED_RAM_BASE, .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), .length = MSM_SHARED_RAM_SIZE, .type = MT_DEVICE, }, +#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ + defined(CONFIG_DEBUG_MSM_UART3) + { + /* Must be last: virtual and pfn filled in by debug_ll_addr() */ + .length = SZ_4K, + .type = MT_DEVICE_NONSHARED, + } +#endif }; void __init msm_map_common_io(void) { + size_t size = ARRAY_SIZE(msm_io_desc); + /* Make sure the peripheral register window is closed, since * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which * pages are peripheral interface or not. */ asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0)); - iotable_init(msm_io_desc, ARRAY_SIZE(msm_io_desc)); +#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ + defined(CONFIG_DEBUG_MSM_UART3) + debug_ll_addr(&msm_io_desc[size - 1].pfn, + &msm_io_desc[size - 1].virtual); + msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn); +#endif + iotable_init(msm_io_desc, size); } #endif @@ -87,10 +98,6 @@ static struct map_desc qsd8x50_io_desc[] __initdata = { MSM_DEVICE(SCPLL), MSM_DEVICE(AD5), MSM_DEVICE(MDC), -#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ - defined(CONFIG_DEBUG_MSM_UART3) - MSM_DEVICE(DEBUG_UART), -#endif { .virtual = (unsigned long) MSM_SHARED_RAM_BASE, .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), @@ -101,40 +108,11 @@ static struct map_desc qsd8x50_io_desc[] __initdata = { void __init msm_map_qsd8x50_io(void) { + debug_ll_io_init(); iotable_init(qsd8x50_io_desc, ARRAY_SIZE(qsd8x50_io_desc)); } #endif /* CONFIG_ARCH_QSD8X50 */ -#ifdef CONFIG_ARCH_MSM8X60 -static struct map_desc msm8x60_io_desc[] __initdata = { - MSM_CHIP_DEVICE(TMR, MSM8X60), - MSM_CHIP_DEVICE(TMR0, MSM8X60), -#ifdef CONFIG_DEBUG_MSM8660_UART - MSM_DEVICE(DEBUG_UART), -#endif -}; - -void __init msm_map_msm8x60_io(void) -{ - iotable_init(msm8x60_io_desc, ARRAY_SIZE(msm8x60_io_desc)); -} -#endif /* CONFIG_ARCH_MSM8X60 */ - -#ifdef CONFIG_ARCH_MSM8960 -static struct map_desc msm8960_io_desc[] __initdata = { - MSM_CHIP_DEVICE(TMR, MSM8960), - MSM_CHIP_DEVICE(TMR0, MSM8960), -#ifdef CONFIG_DEBUG_MSM8960_UART - MSM_DEVICE(DEBUG_UART), -#endif -}; - -void __init msm_map_msm8960_io(void) -{ - iotable_init(msm8960_io_desc, ARRAY_SIZE(msm8960_io_desc)); -} -#endif /* CONFIG_ARCH_MSM8960 */ - #ifdef CONFIG_ARCH_MSM7X30 static struct map_desc msm7x30_io_desc[] __initdata = { MSM_DEVICE(VIC), @@ -150,10 +128,6 @@ static struct map_desc msm7x30_io_desc[] __initdata = { MSM_DEVICE(SAW), MSM_DEVICE(GCC), MSM_DEVICE(TCSR), -#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ - defined(CONFIG_DEBUG_MSM_UART3) - MSM_DEVICE(DEBUG_UART), -#endif { .virtual = (unsigned long) MSM_SHARED_RAM_BASE, .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), @@ -164,10 +138,12 @@ static struct map_desc msm7x30_io_desc[] __initdata = { void __init msm_map_msm7x30_io(void) { + debug_ll_io_init(); iotable_init(msm7x30_io_desc, ARRAY_SIZE(msm7x30_io_desc)); } #endif /* CONFIG_ARCH_MSM7X30 */ +#ifdef CONFIG_ARCH_MSM7X00A void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size, unsigned int mtype, void *caller) { @@ -182,3 +158,4 @@ void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size, return __arm_ioremap_caller(phys_addr, size, mtype, caller); } +#endif diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 8697cfc0d0b6a74538a59eaf92bd3266a10bab9f..696fb73296d0e7bd0d4419e5363c496794a73079 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -16,6 +16,7 @@ #include #include +#include #include #include #include @@ -26,7 +27,6 @@ #include #include -#include #include "common.h" @@ -49,7 +49,7 @@ static void __iomem *sts_base; static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) { - struct clock_event_device *evt = *(struct clock_event_device **)dev_id; + struct clock_event_device *evt = dev_id; /* Stop the timer tick */ if (evt->mode == CLOCK_EVT_MODE_ONESHOT) { u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); @@ -101,18 +101,7 @@ static void msm_timer_set_mode(enum clock_event_mode mode, writel_relaxed(ctrl, event_base + TIMER_ENABLE); } -static struct clock_event_device msm_clockevent = { - .name = "gp_timer", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_next_event = msm_timer_set_next_event, - .set_mode = msm_timer_set_mode, -}; - -static union { - struct clock_event_device *evt; - struct clock_event_device * __percpu *percpu_evt; -} msm_evt; +static struct clock_event_device __percpu *msm_evt; static void __iomem *source_base; @@ -138,23 +127,34 @@ static struct clocksource msm_clocksource = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -#ifdef CONFIG_LOCAL_TIMERS +static int msm_timer_irq; +static int msm_timer_has_ppi; + static int msm_local_timer_setup(struct clock_event_device *evt) { - /* Use existing clock_event for cpu 0 */ - if (!smp_processor_id()) - return 0; - - evt->irq = msm_clockevent.irq; - evt->name = "local_timer"; - evt->features = msm_clockevent.features; - evt->rating = msm_clockevent.rating; + int cpu = smp_processor_id(); + int err; + + evt->irq = msm_timer_irq; + evt->name = "msm_timer"; + evt->features = CLOCK_EVT_FEAT_ONESHOT; + evt->rating = 200; evt->set_mode = msm_timer_set_mode; evt->set_next_event = msm_timer_set_next_event; + evt->cpumask = cpumask_of(cpu); + + clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff); + + if (msm_timer_has_ppi) { + enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING); + } else { + err = request_irq(evt->irq, msm_timer_interrupt, + IRQF_TIMER | IRQF_NOBALANCING | + IRQF_TRIGGER_RISING, "gp_timer", evt); + if (err) + pr_err("request_irq failed\n"); + } - *__this_cpu_ptr(msm_evt.percpu_evt) = evt; - clockevents_config_and_register(evt, GPT_HZ, 4, 0xf0000000); - enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING); return 0; } @@ -164,11 +164,28 @@ static void msm_local_timer_stop(struct clock_event_device *evt) disable_percpu_irq(evt->irq); } -static struct local_timer_ops msm_local_timer_ops = { - .setup = msm_local_timer_setup, - .stop = msm_local_timer_stop, +static int msm_timer_cpu_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + /* + * Grab cpu pointer in each case to avoid spurious + * preemptible warnings + */ + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_STARTING: + msm_local_timer_setup(this_cpu_ptr(msm_evt)); + break; + case CPU_DYING: + msm_local_timer_stop(this_cpu_ptr(msm_evt)); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block msm_timer_cpu_nb = { + .notifier_call = msm_timer_cpu_notify, }; -#endif /* CONFIG_LOCAL_TIMERS */ static notrace u32 msm_sched_clock_read(void) { @@ -178,38 +195,35 @@ static notrace u32 msm_sched_clock_read(void) static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq, bool percpu) { - struct clock_event_device *ce = &msm_clockevent; struct clocksource *cs = &msm_clocksource; - int res; + int res = 0; + + msm_timer_irq = irq; + msm_timer_has_ppi = percpu; + + msm_evt = alloc_percpu(struct clock_event_device); + if (!msm_evt) { + pr_err("memory allocation failed for clockevents\n"); + goto err; + } - ce->cpumask = cpumask_of(0); - ce->irq = irq; + if (percpu) + res = request_percpu_irq(irq, msm_timer_interrupt, + "gp_timer", msm_evt); - clockevents_config_and_register(ce, GPT_HZ, 4, 0xffffffff); - if (percpu) { - msm_evt.percpu_evt = alloc_percpu(struct clock_event_device *); - if (!msm_evt.percpu_evt) { - pr_err("memory allocation failed for %s\n", ce->name); + if (res) { + pr_err("request_percpu_irq failed\n"); + } else { + res = register_cpu_notifier(&msm_timer_cpu_nb); + if (res) { + free_percpu_irq(irq, msm_evt); goto err; } - *__this_cpu_ptr(msm_evt.percpu_evt) = ce; - res = request_percpu_irq(ce->irq, msm_timer_interrupt, - ce->name, msm_evt.percpu_evt); - if (!res) { - enable_percpu_irq(ce->irq, IRQ_TYPE_EDGE_RISING); -#ifdef CONFIG_LOCAL_TIMERS - local_timer_register(&msm_local_timer_ops); -#endif - } - } else { - msm_evt.evt = ce; - res = request_irq(ce->irq, msm_timer_interrupt, - IRQF_TIMER | IRQF_NOBALANCING | - IRQF_TRIGGER_RISING, ce->name, &msm_evt.evt); + + /* Immediately configure the timer on the boot CPU */ + msm_local_timer_setup(__this_cpu_ptr(msm_evt)); } - if (res) - pr_err("request_irq failed for %s\n", ce->name); err: writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE); res = clocksource_register_hz(cs, dgt_hz); @@ -219,15 +233,8 @@ static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq, } #ifdef CONFIG_OF -static const struct of_device_id msm_timer_match[] __initconst = { - { .compatible = "qcom,kpss-timer" }, - { .compatible = "qcom,scss-timer" }, - { }, -}; - -void __init msm_dt_timer_init(void) +static void __init msm_dt_timer_init(struct device_node *np) { - struct device_node *np; u32 freq; int irq; struct resource res; @@ -235,12 +242,6 @@ void __init msm_dt_timer_init(void) void __iomem *base; void __iomem *cpu0_base; - np = of_find_matching_node(NULL, msm_timer_match); - if (!np) { - pr_err("Can't find msm timer DT node\n"); - return; - } - base = of_iomap(np, 0); if (!base) { pr_err("Failed to map event base\n"); @@ -283,6 +284,8 @@ void __init msm_dt_timer_init(void) msm_timer_init(freq, 32, irq, !!percpu_offset); } +CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init); +CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init); #endif static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source, diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S deleted file mode 100644 index a7df02b049b73d4c75a6ec0b17d9d167cc66604f..0000000000000000000000000000000000000000 --- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - - .macro addruart, rp, rv, tmp - ldr \rp, =MV78XX0_REGS_PHYS_BASE - ldr \rv, =MV78XX0_REGS_VIRT_BASE - orr \rp, \rp, #0x00012000 - orr \rv, \rv, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index dc26a654c496d1d06797af927531f6030a24e146..445e553f4a28e886469e4cd112ededdde1057ccb 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -18,6 +18,11 @@ #include #include "common.h" +#define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4) +#define MV78XX0_MBUS_PCIE_MEM_ATTR(port, lane) (0xf8 & ~(0x10 << (lane))) +#define MV78XX0_MBUS_PCIE_IO_TARGET(port, lane) ((port) ? 8 : 4) +#define MV78XX0_MBUS_PCIE_IO_ATTR(port, lane) (0xf0 & ~(0x10 << (lane))) + struct pcie_port { u8 maj; u8 min; @@ -71,7 +76,6 @@ static void __init mv78xx0_pcie_preinit(void) start = MV78XX0_PCIE_MEM_PHYS_BASE; for (i = 0; i < num_pcie_ports; i++) { struct pcie_port *pp = pcie_port + i; - char winname[MVEBU_MBUS_MAX_WINNAME_SZ]; snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), "PCIe %d.%d MEM", pp->maj, pp->min); @@ -85,17 +89,12 @@ static void __init mv78xx0_pcie_preinit(void) if (request_resource(&iomem_resource, &pp->res)) panic("can't allocate PCIe MEM sub-space"); - snprintf(winname, sizeof(winname), "pcie%d.%d", - pp->maj, pp->min); - - mvebu_mbus_add_window_remap_flags(winname, - pp->res.start, - resource_size(&pp->res), - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); - mvebu_mbus_add_window_remap_flags(winname, - i * SZ_64K, SZ_64K, - 0, MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_by_id(MV78XX0_MBUS_PCIE_MEM_TARGET(pp->maj, pp->min), + MV78XX0_MBUS_PCIE_MEM_ATTR(pp->maj, pp->min), + pp->res.start, resource_size(&pp->res)); + mvebu_mbus_add_window_remap_by_id(MV78XX0_MBUS_PCIE_IO_TARGET(pp->maj, pp->min), + MV78XX0_MBUS_PCIE_IO_ATTR(pp->maj, pp->min), + i * SZ_64K, SZ_64K, 0); } } diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 97cbb802191930d21c64532d93e3a4ea2a2594af..829b5730632864b7da0158e8e6c6f833e421e579 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -34,44 +34,12 @@ static void __init armada_370_xp_map_io(void) debug_ll_io_init(); } -/* - * This initialization will be replaced by a DT-based - * initialization once the mvebu-mbus driver gains DT support. - */ - -#define ARMADA_370_XP_MBUS_WINS_OFFS 0x20000 -#define ARMADA_370_XP_MBUS_WINS_SIZE 0x100 -#define ARMADA_370_XP_SDRAM_WINS_OFFS 0x20180 -#define ARMADA_370_XP_SDRAM_WINS_SIZE 0x20 - -static void __init armada_370_xp_mbus_init(void) -{ - char *mbus_soc_name; - struct device_node *dn; - const __be32 mbus_wins_offs = cpu_to_be32(ARMADA_370_XP_MBUS_WINS_OFFS); - const __be32 sdram_wins_offs = cpu_to_be32(ARMADA_370_XP_SDRAM_WINS_OFFS); - - if (of_machine_is_compatible("marvell,armada370")) - mbus_soc_name = "marvell,armada370-mbus"; - else - mbus_soc_name = "marvell,armadaxp-mbus"; - - dn = of_find_node_by_name(NULL, "internal-regs"); - BUG_ON(!dn); - - mvebu_mbus_init(mbus_soc_name, - of_translate_address(dn, &mbus_wins_offs), - ARMADA_370_XP_MBUS_WINS_SIZE, - of_translate_address(dn, &sdram_wins_offs), - ARMADA_370_XP_SDRAM_WINS_SIZE); -} - static void __init armada_370_xp_timer_and_clk_init(void) { of_clk_init(NULL); armada_370_xp_timer_init(); coherency_init(); - armada_370_xp_mbus_init(); + BUG_ON(mvebu_mbus_dt_init()); #ifdef CONFIG_CACHE_L2X0 l2x0_of_init(0, ~0UL); #endif diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index ce81d303140598debb8e5cb9c6bb557e28268f49..ff69c2df298b6b2ce69f742c7f5b6dbcf179f821 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -29,45 +30,43 @@ #include "pmsu.h" #include "coherency.h" +#define AXP_BOOTROM_BASE 0xfff00000 +#define AXP_BOOTROM_SIZE 0x100000 + +static struct clk *__init get_cpu_clk(int cpu) +{ + struct clk *cpu_clk; + struct device_node *np = of_get_cpu_node(cpu, NULL); + + if (WARN(!np, "missing cpu node\n")) + return NULL; + cpu_clk = of_clk_get(np, 0); + if (WARN_ON(IS_ERR(cpu_clk))) + return NULL; + return cpu_clk; +} + void __init set_secondary_cpus_clock(void) { - int thiscpu; + int thiscpu, cpu; unsigned long rate; - struct clk *cpu_clk = NULL; - struct device_node *np = NULL; + struct clk *cpu_clk; thiscpu = smp_processor_id(); - for_each_node_by_type(np, "cpu") { - int err; - int cpu; - - err = of_property_read_u32(np, "reg", &cpu); - if (WARN_ON(err)) - return; - - if (cpu == thiscpu) { - cpu_clk = of_clk_get(np, 0); - break; - } - } - if (WARN_ON(IS_ERR(cpu_clk))) + cpu_clk = get_cpu_clk(thiscpu); + if (!cpu_clk) return; clk_prepare_enable(cpu_clk); rate = clk_get_rate(cpu_clk); /* set all the other CPU clk to the same rate than the boot CPU */ - for_each_node_by_type(np, "cpu") { - int err; - int cpu; - - err = of_property_read_u32(np, "reg", &cpu); - if (WARN_ON(err)) + for_each_possible_cpu(cpu) { + if (cpu == thiscpu) + continue; + cpu_clk = get_cpu_clk(cpu); + if (!cpu_clk) return; - - if (cpu != thiscpu) { - cpu_clk = of_clk_get(np, 0); - clk_set_rate(cpu_clk, rate); - } + clk_set_rate(cpu_clk, rate); } } @@ -87,37 +86,39 @@ static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) static void __init armada_xp_smp_init_cpus(void) { - struct device_node *np; - unsigned int i, ncores; + unsigned int ncores = num_possible_cpus(); - np = of_find_node_by_name(NULL, "cpus"); - if (!np) - panic("No 'cpus' node found\n"); - - ncores = of_get_child_count(np); if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS) panic("Invalid number of CPUs in DT\n"); - /* Limit possible CPUs to defconfig */ - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %d CPUs physically present. Only %d configured.", - ncores, nr_cpu_ids); - pr_warn("Clipping CPU count to %d\n", nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); - set_smp_cross_call(armada_mpic_send_doorbell); } void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) { + struct device_node *node; + struct resource res; + int err; + set_secondary_cpus_clock(); flush_cache_all(); set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); - mvebu_mbus_add_window("bootrom", 0xfff00000, SZ_1M); + + /* + * In order to boot the secondary CPUs we need to ensure + * the bootROM is mapped at the correct address. + */ + node = of_find_compatible_node(NULL, NULL, "marvell,bootrom"); + if (!node) + panic("Cannot find 'marvell,bootrom' compatible node"); + + err = of_address_to_resource(node, 0, &res); + if (err < 0) + panic("Cannot get 'bootrom' node address"); + + if (res.start != AXP_BOOTROM_BASE || + resource_size(&res) != AXP_BOOTROM_SIZE) + panic("The address for the BootROM is incorrect"); } struct smp_operations armada_xp_smp_ops __initdata = { diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 4ce27b536dc951bb1ba628dc69818f1184c1472e..98f6e2adb53eaf39722f4988f43ce9d96c86ba50 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -61,6 +62,8 @@ static u32 chipid; static u32 socid; +static void __iomem *reset_addr; + static inline void __mxs_setl(u32 mask, void __iomem *reg) { __raw_writel(mask, reg + MXS_SET_ADDR); @@ -393,12 +396,33 @@ static const char __init *mxs_get_revision(void) u32 rev = mxs_get_cpu_rev(); if (rev != MXS_CHIP_REV_UNKNOWN) - return kasprintf(GFP_KERNEL, "TO%d.%d", (rev >> 4) & 0xf, + return kasprintf(GFP_KERNEL, "%d.%d", (rev >> 4) & 0xf, rev & 0xf); else return kasprintf(GFP_KERNEL, "%s", "Unknown"); } +#define MX23_CLKCTRL_RESET_OFFSET 0x120 +#define MX28_CLKCTRL_RESET_OFFSET 0x1e0 + +static int __init mxs_restart_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl"); + reset_addr = of_iomap(np, 0); + if (!reset_addr) + return -ENODEV; + + if (of_device_is_compatible(np, "fsl,imx23-clkctrl")) + reset_addr += MX23_CLKCTRL_RESET_OFFSET; + else + reset_addr += MX28_CLKCTRL_RESET_OFFSET; + of_node_put(np); + + return 0; +} + static void __init mxs_machine_init(void) { struct device_node *root; @@ -433,21 +457,18 @@ static void __init mxs_machine_init(void) imx28_evk_init(); else if (of_machine_is_compatible("bluegiga,apx4devkit")) apx4devkit_init(); - else if (of_machine_is_compatible("crystalfontz,cfa10037") || - of_machine_is_compatible("crystalfontz,cfa10049") || - of_machine_is_compatible("crystalfontz,cfa10055") || - of_machine_is_compatible("crystalfontz,cfa10057")) + else if (of_machine_is_compatible("crystalfontz,cfa10036")) crystalfontz_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + mxs_restart_init(); + if (of_machine_is_compatible("karo,tx28")) tx28_post_init(); } -#define MX23_CLKCTRL_RESET_OFFSET 0x120 -#define MX28_CLKCTRL_RESET_OFFSET 0x1e0 #define MXS_CLKCTRL_RESET_CHIP (1 << 1) /* @@ -455,28 +476,16 @@ static void __init mxs_machine_init(void) */ static void mxs_restart(enum reboot_mode mode, const char *cmd) { - struct device_node *np; - void __iomem *reset_addr; + if (reset_addr) { + /* reset the chip */ + __mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr); - np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl"); - reset_addr = of_iomap(np, 0); - if (!reset_addr) - goto soft; + pr_err("Failed to assert the chip reset\n"); - if (of_device_is_compatible(np, "fsl,imx23-clkctrl")) - reset_addr += MX23_CLKCTRL_RESET_OFFSET; - else - reset_addr += MX28_CLKCTRL_RESET_OFFSET; - - /* reset the chip */ - __mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr); - - pr_err("Failed to assert the chip reset\n"); - - /* Delay to allow the serial port to show the message */ - mdelay(50); + /* Delay to allow the serial port to show the message */ + mdelay(50); + } -soft: /* We'll take a jump through zero as a poor second */ soft_restart(0); } @@ -487,6 +496,7 @@ static void __init mxs_timer_init(void) mx23_clocks_init(); else mx28_clocks_init(); + of_clk_init(NULL); clocksource_of_init(); } diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c index b2494d2db2c4bc0753b96956b97cf49f6703039d..0170e99fd70fd4c0947fbd4578ccbcad2c312a5e 100644 --- a/arch/arm/mach-mxs/pm.c +++ b/arch/arm/mach-mxs/pm.c @@ -15,6 +15,7 @@ #include #include #include +#include "pm.h" static int mxs_suspend_enter(suspend_state_t state) { diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 5981c3db9b41d33f36068bcc3a12e62a85447e23..4d42da49753c68f1afd914a0a4a4246e09b8893c 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -27,6 +27,7 @@ config MACH_NOMADIK_8815NHK select NOMADIK_8815 select I2C select I2C_ALGOBIT + select I2C_NOMADIK endmenu endif diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h index 6cf9c1cc2bef3cf3fa7749d134a0edb64bdf8644..612bd1cc257c147255eb9baefb86ff6d0a6a2497 100644 --- a/arch/arm/mach-omap1/include/mach/soc.h +++ b/arch/arm/mach-omap1/include/mach/soc.h @@ -195,6 +195,7 @@ IS_OMAP_TYPE(1710, 0x1710) #define cpu_is_omap34xx() 0 #define cpu_is_omap44xx() 0 #define soc_is_omap54xx() 0 +#define soc_is_dra7xx() 0 #define soc_is_am33xx() 0 #define cpu_class_is_omap1() 1 #define cpu_class_is_omap2() 0 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 3eed0006d189c0c0e88412485dba67e1800b2d6e..b5fb5f7992dfed4972be5a927934b9ccfa26ae9f 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -37,9 +37,8 @@ config ARCH_OMAP4 select CACHE_L2X0 select CPU_V7 select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_ARM_TWD if SMP select HAVE_SMP - select LOCAL_TIMERS if SMP select OMAP_INTERCONNECT select PL310_ERRATA_588369 select PL310_ERRATA_727915 @@ -65,7 +64,7 @@ config SOC_OMAP5 select ARM_ERRATA_798181 if SMP config SOC_AM33XX - bool "AM33XX support" + bool "TI AM33XX" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS select ARM_CPU_SUSPEND if PM @@ -118,7 +117,7 @@ config ARCH_OMAP2PLUS_TYPICAL select I2C select I2C_OMAP select MENELAUS if ARCH_OMAP2 - select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 + select NEON if CPU_V7 select PM_RUNTIME select REGULATOR select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 @@ -132,9 +131,17 @@ config SOC_HAS_OMAP2_SDRC config SOC_HAS_REALTIME_COUNTER bool "Real time free running counter" - depends on SOC_OMAP5 + depends on SOC_OMAP5 || SOC_DRA7XX default y +config SOC_DRA7XX + bool "TI DRA7XX" + select ARM_ARCH_TIMER + select CPU_V7 + select ARM_GIC + select HAVE_SMP + select COMMON_CLK + comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index d4f671547c3756cb5d134aada03d0d2471ffa23b..cc36bfe104fec312db82afb52c33e0e41fb40c8d 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common) ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) obj-y += mcbsp.o @@ -39,6 +40,7 @@ omap-4-5-common = omap4-common.o omap-wakeupgen.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) $(smp-y) sleep44xx.o obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y) sleep44xx.o obj-$(CONFIG_SOC_AM43XX) += $(omap-4-5-common) +obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-common) $(smp-y) plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) @@ -87,6 +89,7 @@ obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o +obj-$(CONFIG_SOC_DRA7XX) += omap-mpuss-lowpower.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o @@ -114,6 +117,7 @@ omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \ vc44xx_data.o vp44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) +obj-$(CONFIG_SOC_DRA7XX) += $(omap-prcm-4-5-common) # OMAP voltage domains voltagedomain-common := voltage.o vc.o vp.o @@ -143,6 +147,7 @@ obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o obj-$(CONFIG_SOC_AM43XX) += $(powerdomain-common) obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common) obj-$(CONFIG_SOC_OMAP5) += powerdomains54xx_data.o +obj-$(CONFIG_SOC_DRA7XX) += $(powerdomain-common) # PRCM clockdomain control clockdomain-common += clockdomain.o @@ -160,6 +165,7 @@ obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o obj-$(CONFIG_SOC_AM43XX) += $(clockdomain-common) obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common) obj-$(CONFIG_SOC_OMAP5) += clockdomains54xx_data.o +obj-$(CONFIG_SOC_DRA7XX) += $(clockdomain-common) # Clock framework obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o diff --git a/arch/arm/mach-omap2/am33xx-restart.c b/arch/arm/mach-omap2/am33xx-restart.c index 1eae962123154684aae2b4dfd09b606e0de689d6..c88d8df753c2d49b44db050e450c8dcb8fada2de 100644 --- a/arch/arm/mach-omap2/am33xx-restart.c +++ b/arch/arm/mach-omap2/am33xx-restart.c @@ -24,8 +24,8 @@ void am33xx_restart(enum reboot_mode mode, const char *cmd) { /* TODO: Handle mode and cmd if necessary */ - am33xx_prm_rmw_reg_bits(AM33XX_GLOBAL_WARM_SW_RST_MASK, - AM33XX_GLOBAL_WARM_SW_RST_MASK, + am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK, + AM33XX_RST_GLOBAL_WARM_SW_MASK, AM33XX_PRM_DEVICE_MOD, AM33XX_PRM_RSTCTRL_OFFSET); diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 244d8a5aa54befd47712d22dc2a43bfb7326370e..c711ad6ac06781014f3c5daace7c6da2382bccb6 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -100,39 +100,52 @@ static struct platform_device sdp2430_flash_device = { .resource = &sdp2430_flash_resource, }; -static struct platform_device *sdp2430_devices[] __initdata = { - &sdp2430_flash_device, -}; - /* LCD */ #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 #define SDP2430_LCD_PANEL_ENABLE_GPIO 154 -static struct panel_generic_dpi_data sdp2430_panel_data = { - .name = "nec_nl2432dr22-11b", - .num_gpios = 2, - .gpios = { - SDP2430_LCD_PANEL_ENABLE_GPIO, - SDP2430_LCD_PANEL_BACKLIGHT_GPIO, - }, +static const struct display_timing sdp2430_lcd_videomode = { + .pixelclock = { 0, 5400000, 0 }, + + .hactive = { 0, 240, 0 }, + .hfront_porch = { 0, 3, 0 }, + .hback_porch = { 0, 39, 0 }, + .hsync_len = { 0, 3, 0 }, + + .vactive = { 0, 320, 0 }, + .vfront_porch = { 0, 2, 0 }, + .vback_porch = { 0, 7, 0 }, + .vsync_len = { 0, 1, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct omap_dss_device sdp2430_lcd_device = { - .name = "lcd", - .driver_name = "generic_dpi_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 16, - .data = &sdp2430_panel_data, +static struct panel_dpi_platform_data sdp2430_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 16, + + .display_timing = &sdp2430_lcd_videomode, + + .enable_gpio = SDP2430_LCD_PANEL_ENABLE_GPIO, + .backlight_gpio = SDP2430_LCD_PANEL_BACKLIGHT_GPIO, }; -static struct omap_dss_device *sdp2430_dss_devices[] = { - &sdp2430_lcd_device, +static struct platform_device sdp2430_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &sdp2430_lcd_pdata, }; static struct omap_dss_board_info sdp2430_dss_data = { - .num_devices = ARRAY_SIZE(sdp2430_dss_devices), - .devices = sdp2430_dss_devices, - .default_device = &sdp2430_lcd_device, + .default_display_name = "lcd", +}; + +static struct platform_device *sdp2430_devices[] __initdata = { + &sdp2430_flash_device, + &sdp2430_lcd_device, }; #if IS_ENABLED(CONFIG_SMC91X) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 23b004afa3f8f27d6670f3ab329e2fa65c68e35e..d95d0ef1354aeb0b44fecdb2d774d728f820463d 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -126,53 +126,65 @@ static void __init sdp3430_display_init(void) } -static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = { - .resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO, - .ini_gpio = -1, - .mo_gpio = -1, - .lr_gpio = -1, - .ud_gpio = -1, +static struct panel_sharp_ls037v7dw01_platform_data sdp3430_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 16, + + .resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO, + .ini_gpio = -1, + .mo_gpio = -1, + .lr_gpio = -1, + .ud_gpio = -1, +}; + +static struct platform_device sdp3430_lcd_device = { + .name = "panel-sharp-ls037v7dw01", + .id = 0, + .dev.platform_data = &sdp3430_lcd_pdata, }; -static struct omap_dss_device sdp3430_lcd_device = { - .name = "lcd", - .driver_name = "sharp_ls_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 16, - .data = &sdp3430_lcd_data, +static struct connector_dvi_platform_data sdp3430_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = -1, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = -1, - .i2c_bus_num = -1, +static struct platform_device sdp3430_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &sdp3430_dvi_connector_pdata, }; -static struct omap_dss_device sdp3430_dvi_device = { - .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct encoder_tfp410_platform_data sdp3430_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, }; -static struct omap_dss_device sdp3430_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct platform_device sdp3430_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &sdp3430_tfp410_pdata, }; +static struct connector_atv_platform_data sdp3430_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, +}; -static struct omap_dss_device *sdp3430_dss_devices[] = { - &sdp3430_lcd_device, - &sdp3430_dvi_device, - &sdp3430_tv_device, +static struct platform_device sdp3430_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &sdp3430_tv_pdata, }; static struct omap_dss_board_info sdp3430_dss_data = { - .num_devices = ARRAY_SIZE(sdp3430_dss_devices), - .devices = sdp3430_dss_devices, - .default_device = &sdp3430_lcd_device, + .default_display_name = "lcd", }; static struct omap2_hsmmc_info mmc[] = { @@ -583,6 +595,11 @@ static void __init omap_3430sdp_init(void) omap_hsmmc_init(mmc); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); + platform_device_register(&sdp3430_lcd_device); + platform_device_register(&sdp3430_tfp410_device); + platform_device_register(&sdp3430_dvi_connector_device); + platform_device_register(&sdp3430_tv_connector_device); + if (omap_rev() > OMAP3430_REV_ES1_0) gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2; else diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index fc53911d0d13b9842a7efcf28ba4431159df0bc4..0d499a1878f6917f7ce4ffcd61dd04cb92fb6db5 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -110,8 +110,6 @@ static void __init am3517_crane_i2c_init(void) static void __init am3517_crane_init(void) { - int ret; - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); omap_sdrc_init(NULL, NULL); diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index d63f14b534b5b2337ae94091ea3282d20cf07ba7..543d9a882de32915ed7f9ec79395b48391f0497e 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -21,7 +21,7 @@ #include #include #include -#include +#include #include #include #include @@ -120,56 +120,95 @@ static int __init am3517_evm_i2c_init(void) return 0; } -static struct panel_generic_dpi_data lcd_panel = { - .name = "sharp_lq", - .num_gpios = 3, - .gpios = { - LCD_PANEL_PWR, - LCD_PANEL_BKLIGHT_PWR, - LCD_PANEL_PWM, - }, +static const struct display_timing am3517_evm_lcd_videomode = { + .pixelclock = { 0, 9000000, 0 }, + + .hactive = { 0, 480, 0 }, + .hfront_porch = { 0, 3, 0 }, + .hback_porch = { 0, 2, 0 }, + .hsync_len = { 0, 42, 0 }, + + .vactive = { 0, 272, 0 }, + .vfront_porch = { 0, 3, 0 }, + .vback_porch = { 0, 2, 0 }, + .vsync_len = { 0, 11, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_LOW | DISPLAY_FLAGS_PIXDATA_POSEDGE, +}; + +static struct panel_dpi_platform_data am3517_evm_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 16, + + .display_timing = &am3517_evm_lcd_videomode, + + .enable_gpio = LCD_PANEL_PWR, + .backlight_gpio = LCD_PANEL_BKLIGHT_PWR, +}; + +static struct platform_device am3517_evm_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &am3517_evm_lcd_pdata, }; -static struct omap_dss_device am3517_evm_lcd_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "lcd", - .driver_name = "generic_dpi_panel", - .data = &lcd_panel, - .phy.dpi.data_lines = 16, +static struct connector_dvi_platform_data am3517_evm_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = -1, }; -static struct omap_dss_device am3517_evm_tv_device = { - .type = OMAP_DISPLAY_TYPE_VENC, - .name = "tv", - .driver_name = "venc", - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct platform_device am3517_evm_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &am3517_evm_dvi_connector_pdata, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = -1, - .i2c_bus_num = -1, +static struct encoder_tfp410_platform_data am3517_evm_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, }; -static struct omap_dss_device am3517_evm_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct platform_device am3517_evm_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &am3517_evm_tfp410_pdata, }; -static struct omap_dss_device *am3517_evm_dss_devices[] = { - &am3517_evm_lcd_device, - &am3517_evm_tv_device, - &am3517_evm_dvi_device, +static struct connector_atv_platform_data am3517_evm_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, +}; + +static struct platform_device am3517_evm_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &am3517_evm_tv_pdata, }; static struct omap_dss_board_info am3517_evm_dss_data = { - .num_devices = ARRAY_SIZE(am3517_evm_dss_devices), - .devices = am3517_evm_dss_devices, - .default_device = &am3517_evm_lcd_device, + .default_display_name = "lcd", }; +static void __init am3517_evm_display_init(void) +{ + gpio_request_one(LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd panel pwm"); + + omap_display_init(&am3517_evm_dss_data); + + platform_device_register(&am3517_evm_tfp410_device); + platform_device_register(&am3517_evm_dvi_connector_device); + platform_device_register(&am3517_evm_lcd_device); + platform_device_register(&am3517_evm_tv_connector_device); +} + /* * Board initialization */ @@ -295,7 +334,9 @@ static void __init am3517_evm_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); am3517_evm_i2c_init(); - omap_display_init(&am3517_evm_dss_data); + + am3517_evm_display_init(); + omap_serial_init(); omap_sdrc_init(NULL, NULL); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index d4622ed26252d63d9eecf4b939b6a4bffbda9ae1..33d159e2386e6a86801d7decced3522125c3b8fb 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -190,52 +190,81 @@ static inline void cm_t35_init_nand(void) {} #define CM_T35_LCD_BL_GPIO 58 #define CM_T35_DVI_EN_GPIO 54 -static struct panel_generic_dpi_data lcd_panel = { - .name = "toppoly_tdo35s", - .num_gpios = 1, - .gpios = { - CM_T35_LCD_BL_GPIO, - }, +static const struct display_timing cm_t35_lcd_videomode = { + .pixelclock = { 0, 26000000, 0 }, + + .hactive = { 0, 480, 0 }, + .hfront_porch = { 0, 104, 0 }, + .hback_porch = { 0, 8, 0 }, + .hsync_len = { 0, 8, 0 }, + + .vactive = { 0, 640, 0 }, + .vfront_porch = { 0, 4, 0 }, + .vback_porch = { 0, 2, 0 }, + .vsync_len = { 0, 2, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE, +}; + +static struct panel_dpi_platform_data cm_t35_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 18, + + .display_timing = &cm_t35_lcd_videomode, + + .enable_gpio = -1, + .backlight_gpio = CM_T35_LCD_BL_GPIO, +}; + +static struct platform_device cm_t35_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &cm_t35_lcd_pdata, }; -static struct omap_dss_device cm_t35_lcd_device = { - .name = "lcd", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", - .data = &lcd_panel, - .phy.dpi.data_lines = 18, +static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = -1, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = CM_T35_DVI_EN_GPIO, - .i2c_bus_num = -1, +static struct platform_device cm_t35_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &cm_t35_dvi_connector_pdata, }; -static struct omap_dss_device cm_t35_dvi_device = { - .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = CM_T35_DVI_EN_GPIO, }; -static struct omap_dss_device cm_t35_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct platform_device cm_t35_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &cm_t35_tfp410_pdata, }; -static struct omap_dss_device *cm_t35_dss_devices[] = { - &cm_t35_lcd_device, - &cm_t35_dvi_device, - &cm_t35_tv_device, +static struct connector_atv_platform_data cm_t35_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, +}; + +static struct platform_device cm_t35_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &cm_t35_tv_pdata, }; static struct omap_dss_board_info cm_t35_dss_data = { - .num_devices = ARRAY_SIZE(cm_t35_dss_devices), - .devices = cm_t35_dss_devices, - .default_device = &cm_t35_dvi_device, + .default_display_name = "dvi", }; static struct omap2_mcspi_device_config tdo24m_mcspi_config = { @@ -280,6 +309,11 @@ static void __init cm_t35_init_display(void) pr_err("CM-T35: failed to register DSS device\n"); gpio_free(CM_T35_LCD_EN_GPIO); } + + platform_device_register(&cm_t35_tfp410_device); + platform_device_register(&cm_t35_dvi_connector_device); + platform_device_register(&cm_t35_lcd_device); + platform_device_register(&cm_t35_tv_connector_device); } static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = { diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index f1d91ba5d1ac2dacf9925f4afc36779051a9a8ef..cdc4fb9960a99dda470d6b939366db4d678be595 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -112,50 +112,81 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = { REGULATOR_SUPPLY("vcc", "spi2.0"), }; -static struct panel_generic_dpi_data lcd_panel = { - .name = "innolux_at070tn83", - /* gpios filled in code */ +static const struct display_timing devkit8000_lcd_videomode = { + .pixelclock = { 0, 40000000, 0 }, + + .hactive = { 0, 800, 0 }, + .hfront_porch = { 0, 1, 0 }, + .hback_porch = { 0, 1, 0 }, + .hsync_len = { 0, 48, 0 }, + + .vactive = { 0, 480, 0 }, + .vfront_porch = { 0, 12, 0 }, + .vback_porch = { 0, 25, 0 }, + .vsync_len = { 0, 3, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct omap_dss_device devkit8000_lcd_device = { +static struct panel_dpi_platform_data devkit8000_lcd_pdata = { .name = "lcd", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", - .data = &lcd_panel, - .phy.dpi.data_lines = 24, + .source = "dpi.0", + + .data_lines = 24, + + .display_timing = &devkit8000_lcd_videomode, + + .enable_gpio = -1, /* filled in code */ + .backlight_gpio = -1, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = -1, - .i2c_bus_num = 1, +static struct platform_device devkit8000_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &devkit8000_lcd_pdata, }; -static struct omap_dss_device devkit8000_dvi_device = { +static struct connector_dvi_platform_data devkit8000_dvi_connector_pdata = { .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, + .source = "tfp410.0", + .i2c_bus_num = 1, }; -static struct omap_dss_device devkit8000_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct platform_device devkit8000_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &devkit8000_dvi_connector_pdata, }; +static struct encoder_tfp410_platform_data devkit8000_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, /* filled in code */ +}; -static struct omap_dss_device *devkit8000_dss_devices[] = { - &devkit8000_lcd_device, - &devkit8000_dvi_device, - &devkit8000_tv_device, +static struct platform_device devkit8000_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &devkit8000_tfp410_pdata, +}; + +static struct connector_atv_platform_data devkit8000_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, +}; + +static struct platform_device devkit8000_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &devkit8000_tv_pdata, }; static struct omap_dss_board_info devkit8000_dss_data = { - .num_devices = ARRAY_SIZE(devkit8000_dss_devices), - .devices = devkit8000_dss_devices, - .default_device = &devkit8000_lcd_device, + .default_display_name = "lcd", }; static uint32_t board_keymap[] = { @@ -204,11 +235,10 @@ static int devkit8000_twl_gpio_setup(struct device *dev, gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ - lcd_panel.num_gpios = 1; - lcd_panel.gpios[0] = gpio + TWL4030_GPIO_MAX + 0; + devkit8000_lcd_pdata.enable_gpio = gpio + TWL4030_GPIO_MAX + 0; /* gpio + 7 is "DVI_PD" (out, active low) */ - dvi_panel.power_down_gpio = gpio + 7; + devkit8000_tfp410_pdata.power_down_gpio = gpio + 7; return 0; } @@ -413,6 +443,10 @@ static struct platform_device *devkit8000_devices[] __initdata = { &leds_gpio, &keys_gpio, &omap_dm9000_dev, + &devkit8000_lcd_device, + &devkit8000_tfp410_device, + &devkit8000_dvi_connector_device, + &devkit8000_tv_connector_device, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index be5d005ebad2866ea7432586beba45e000330be9..b89e55ba2c13a517a1118992229966d250a07d16 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -222,3 +222,21 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") .dt_compat = am43_boards_compat, MACHINE_END #endif + +#ifdef CONFIG_SOC_DRA7XX +static const char *dra7xx_boards_compat[] __initdata = { + "ti,dra7", + NULL, +}; + +DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)") + .reserve = omap_reserve, + .smp = smp_ops(omap4_smp_ops), + .map_io = omap5_map_io, + .init_early = dra7xx_init_early, + .init_irq = omap_gic_of_init, + .init_machine = omap_generic_init, + .init_time = omap5_realtime_timer_init, + .dt_compat = dra7xx_boards_compat, +MACHINE_END +#endif diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 69c0acf5aa63cbf9f9f0eaeb89edb0bc52c6590c..87e41a8b8d4666059c43a49c2f4ea953b3327fb2 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -194,30 +194,48 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -static struct platform_device *h4_devices[] __initdata = { - &h4_flash_device, +static const struct display_timing cm_t35_lcd_videomode = { + .pixelclock = { 0, 6250000, 0 }, + + .hactive = { 0, 240, 0 }, + .hfront_porch = { 0, 15, 0 }, + .hback_porch = { 0, 60, 0 }, + .hsync_len = { 0, 15, 0 }, + + .vactive = { 0, 320, 0 }, + .vfront_porch = { 0, 1, 0 }, + .vback_porch = { 0, 1, 0 }, + .vsync_len = { 0, 1, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_HIGH | DISPLAY_FLAGS_VSYNC_HIGH | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct panel_generic_dpi_data h4_panel_data = { - .name = "h4", +static struct panel_dpi_platform_data cm_t35_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 16, + + .display_timing = &cm_t35_lcd_videomode, + + .enable_gpio = -1, + .backlight_gpio = -1, }; -static struct omap_dss_device h4_lcd_device = { - .name = "lcd", - .driver_name = "generic_dpi_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 16, - .data = &h4_panel_data, +static struct platform_device cm_t35_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &cm_t35_lcd_pdata, }; -static struct omap_dss_device *h4_dss_devices[] = { - &h4_lcd_device, +static struct platform_device *h4_devices[] __initdata = { + &h4_flash_device, + &cm_t35_lcd_device, }; static struct omap_dss_board_info h4_dss_data = { - .num_devices = ARRAY_SIZE(h4_dss_devices), - .devices = h4_dss_devices, - .default_device = &h4_lcd_device, + .default_display_name = "lcd", }; /* 2420 Sysboot setup (2430 is different) */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 87e65dde8e133a47baaebf7313767810c786a4d6..06dbb2d3d38be9ea3139675c7f77a907608661a8 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -429,31 +429,39 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .setup = igep_twl_gpio_setup, }; -static struct tfp410_platform_data dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = IGEP2_GPIO_DVI_PUP, +static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = 3, }; -static struct omap_dss_device igep2_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct platform_device omap3stalker_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &omap3stalker_dvi_connector_pdata, }; -static struct omap_dss_device *igep2_dss_devices[] = { - &igep2_dvi_device +static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = IGEP2_GPIO_DVI_PUP, +}; + +static struct platform_device omap3stalker_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &omap3stalker_tfp410_pdata, }; static struct omap_dss_board_info igep2_dss_data = { - .num_devices = ARRAY_SIZE(igep2_dss_devices), - .devices = igep2_dss_devices, - .default_device = &igep2_dvi_device, + .default_display_name = "dvi", }; static struct platform_device *igep_devices[] __initdata = { &igep_vwlan_device, + &omap3stalker_tfp410_device, + &omap3stalker_dvi_connector_device, }; static int igep2_keymap[] = { diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 62e4f701b63baf33f0720dd786d0feadb901017e..dd8da2c5399f34386baacd5d79eba2bdc41dc8c9 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -184,45 +184,70 @@ static inline void __init ldp_init_smsc911x(void) #define LCD_PANEL_RESET_GPIO 55 #define LCD_PANEL_QVGA_GPIO 56 -static struct panel_generic_dpi_data ldp_panel_data = { - .name = "nec_nl2432dr22-11b", - .num_gpios = 4, - /* gpios filled in code */ +static const struct display_timing ldp_lcd_videomode = { + .pixelclock = { 0, 5400000, 0 }, + + .hactive = { 0, 240, 0 }, + .hfront_porch = { 0, 3, 0 }, + .hback_porch = { 0, 39, 0 }, + .hsync_len = { 0, 3, 0 }, + + .vactive = { 0, 320, 0 }, + .vfront_porch = { 0, 2, 0 }, + .vback_porch = { 0, 7, 0 }, + .vsync_len = { 0, 1, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct omap_dss_device ldp_lcd_device = { - .name = "lcd", - .driver_name = "generic_dpi_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 18, - .data = &ldp_panel_data, +static struct panel_dpi_platform_data ldp_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 18, + + .display_timing = &ldp_lcd_videomode, + + .enable_gpio = -1, /* filled in code */ + .backlight_gpio = -1, /* filled in code */ }; -static struct omap_dss_device *ldp_dss_devices[] = { - &ldp_lcd_device, +static struct platform_device ldp_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &ldp_lcd_pdata, }; static struct omap_dss_board_info ldp_dss_data = { - .num_devices = ARRAY_SIZE(ldp_dss_devices), - .devices = ldp_dss_devices, - .default_device = &ldp_lcd_device, + .default_display_name = "lcd", }; static void __init ldp_display_init(void) { - ldp_panel_data.gpios[2] = LCD_PANEL_RESET_GPIO; - ldp_panel_data.gpios[3] = LCD_PANEL_QVGA_GPIO; + int r; + + static struct gpio gpios[] __initdata = { + {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"}, + {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"}, + }; + + r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); + if (r) { + pr_err("Cannot request LCD GPIOs, error %d\n", r); + return; + } omap_display_init(&ldp_dss_data); } static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - ldp_panel_data.gpios[0] = gpio + 7; - ldp_panel_data.gpio_invert[0] = true; + /* LCD enable GPIO */ + ldp_lcd_pdata.enable_gpio = gpio + 7; - ldp_panel_data.gpios[1] = gpio + 15; - ldp_panel_data.gpio_invert[1] = true; + /* Backlight enable GPIO */ + ldp_lcd_pdata.backlight_gpio = gpio + 15; return 0; } @@ -322,6 +347,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = { static struct platform_device *ldp_devices[] __initdata = { &ldp_gpio_keys_device, + &ldp_lcd_device, }; #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 04c1165554125553b29fc1292404c1cc922ed965..f26918467efcf42cc13639317965ebdb6d34bf14 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include @@ -225,35 +225,46 @@ static struct mtd_partition omap3beagle_nand_partitions[] = { /* DSS */ -static struct tfp410_platform_data dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = -1, +static struct connector_dvi_platform_data beagle_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = 3, }; -static struct omap_dss_device beagle_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct platform_device beagle_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &beagle_dvi_connector_pdata, }; -static struct omap_dss_device beagle_tv_device = { +static struct encoder_tfp410_platform_data beagle_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, +}; + +static struct platform_device beagle_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &beagle_tfp410_pdata, +}; + +static struct connector_atv_platform_data beagle_tv_pdata = { .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, }; -static struct omap_dss_device *beagle_dss_devices[] = { - &beagle_dvi_device, - &beagle_tv_device, +static struct platform_device beagle_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &beagle_tv_pdata, }; static struct omap_dss_board_info beagle_dss_data = { - .num_devices = ARRAY_SIZE(beagle_dss_devices), - .devices = beagle_dss_devices, - .default_device = &beagle_dvi_device, + .default_display_name = "dvi", }; #include "sdram-micron-mt46h32m32lf-6.h" @@ -279,7 +290,7 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = { static struct gpio_led gpio_leds[]; /* PHY's VCC regulator might be added later, so flag that we need it */ -static struct nop_usb_xceiv_platform_data hsusb2_phy_data = { +static struct usb_phy_gen_xceiv_platform_data hsusb2_phy_data = { .needs_vcc = true, }; @@ -332,7 +343,11 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; + beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio; + + platform_device_register(&beagle_tfp410_device); + platform_device_register(&beagle_dvi_connector_device); + platform_device_register(&beagle_tv_connector_device); /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */ phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX; @@ -547,6 +562,7 @@ static void __init omap3_beagle_init(void) if (gpio_is_valid(beagle_config.dvi_pd_gpio)) omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); omap_display_init(&beagle_dss_data); + omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 8c026269bacaa379ec583dbeb81bd6f3ef9568b9..18143873346cca1af8563713066f867ef9dd76d8 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include @@ -166,14 +166,6 @@ static inline void __init omap3evm_init_smsc911x(void) { return; } */ #define OMAP3EVM_DVI_PANEL_EN_GPIO 199 -static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = { - .resb_gpio = OMAP3EVM_LCD_PANEL_RESB, - .ini_gpio = OMAP3EVM_LCD_PANEL_INI, - .mo_gpio = OMAP3EVM_LCD_PANEL_QVGA, - .lr_gpio = OMAP3EVM_LCD_PANEL_LR, - .ud_gpio = OMAP3EVM_LCD_PANEL_UD, -}; - #ifdef CONFIG_BROKEN static void __init omap3_evm_display_init(void) { @@ -196,44 +188,65 @@ static void __init omap3_evm_display_init(void) } #endif -static struct omap_dss_device omap3_evm_lcd_device = { - .name = "lcd", - .driver_name = "sharp_ls_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 18, - .data = &omap3_evm_lcd_data, +static struct panel_sharp_ls037v7dw01_platform_data omap3_evm_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 18, + + .resb_gpio = OMAP3EVM_LCD_PANEL_RESB, + .ini_gpio = OMAP3EVM_LCD_PANEL_INI, + .mo_gpio = OMAP3EVM_LCD_PANEL_QVGA, + .lr_gpio = OMAP3EVM_LCD_PANEL_LR, + .ud_gpio = OMAP3EVM_LCD_PANEL_UD, +}; + +static struct platform_device omap3_evm_lcd_device = { + .name = "panel-sharp-ls037v7dw01", + .id = 0, + .dev.platform_data = &omap3_evm_lcd_pdata, +}; + +static struct connector_dvi_platform_data omap3_evm_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = -1, +}; + +static struct platform_device omap3_evm_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &omap3_evm_dvi_connector_pdata, }; -static struct omap_dss_device omap3_evm_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct encoder_tfp410_platform_data omap3_evm_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO, - .i2c_bus_num = -1, +static struct platform_device omap3_evm_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &omap3_evm_tfp410_pdata, }; -static struct omap_dss_device omap3_evm_dvi_device = { - .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct connector_atv_platform_data omap3_evm_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, }; -static struct omap_dss_device *omap3_evm_dss_devices[] = { - &omap3_evm_lcd_device, - &omap3_evm_tv_device, - &omap3_evm_dvi_device, +static struct platform_device omap3_evm_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &omap3_evm_tv_pdata, }; static struct omap_dss_board_info omap3_evm_dss_data = { - .num_devices = ARRAY_SIZE(omap3_evm_dss_devices), - .devices = omap3_evm_dss_devices, - .default_device = &omap3_evm_lcd_device, + .default_display_name = "lcd", }; static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = { @@ -468,7 +481,7 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ - REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ + REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"), /* hsusb port 2 */ REGULATOR_SUPPLY("vaux2", NULL), }; @@ -678,6 +691,10 @@ static void __init omap3_evm_init(void) omap3_evm_i2c_init(); omap_display_init(&omap3_evm_dss_data); + platform_device_register(&omap3_evm_lcd_device); + platform_device_register(&omap3_evm_tfp410_device); + platform_device_register(&omap3_evm_dvi_connector_device); + platform_device_register(&omap3_evm_tv_connector_device); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index b1547a0edfcd7df38b6e6e2cf5f74daec4ab0b36..de1bc6bbe5850befb37de62465c95ba52b5a2b10 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -231,34 +231,21 @@ static struct twl4030_keypad_data pandora_kp_data = { .rep = 1, }; -static struct panel_tpo_td043_data lcd_data = { - .nreset_gpio = 157, -}; - -static struct omap_dss_device pandora_lcd_device = { - .name = "lcd", - .driver_name = "tpo_td043mtea1_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 24, - .data = &lcd_data, -}; - -static struct omap_dss_device pandora_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct connector_atv_platform_data pandora_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, }; -static struct omap_dss_device *pandora_dss_devices[] = { - &pandora_lcd_device, - &pandora_tv_device, +static struct platform_device pandora_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &pandora_tv_pdata, }; static struct omap_dss_board_info pandora_dss_data = { - .num_devices = ARRAY_SIZE(pandora_dss_devices), - .devices = pandora_dss_devices, - .default_device = &pandora_lcd_device, + .default_display_name = "lcd", }; static void pandora_wl1251_init_card(struct mmc_card *card) @@ -348,11 +335,11 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = { }; static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { - REGULATOR_SUPPLY("vcc", "display0"), + REGULATOR_SUPPLY("vcc", "spi1.1"), }; static struct regulator_consumer_supply pandora_usb_phy_supply[] = { - REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ + REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"), /* hsusb port 2 */ }; /* ads7846 on SPI and 2 nub controllers on I2C */ @@ -529,13 +516,21 @@ static int __init omap3pandora_i2c_init(void) return 0; } +static struct panel_tpo_td043mtea1_platform_data pandora_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 24, + .nreset_gpio = 157, +}; + static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { { - .modalias = "tpo_td043mtea1_panel_spi", + .modalias = "panel-tpo-td043mtea1", .bus_num = 1, .chip_select = 1, .max_speed_hz = 375000, - .platform_data = &pandora_lcd_device, + .platform_data = &pandora_lcd_pdata, } }; @@ -580,6 +575,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_keys_gpio, &pandora_vwlan_device, &pandora_backlight, + &pandora_tv_connector_device, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index d37e6b187ae45745a366b49d7b1be8b86220f975..ba8342fef799ee10c3248bc75188bad47b5971bf 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -93,40 +93,50 @@ static void __init omap3_stalker_display_init(void) { return; } +static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = -1, +}; -static struct omap_dss_device omap3_stalker_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, -#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO) - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, -#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) - .u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE, -#endif +static struct platform_device omap3stalker_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &omap3stalker_dvi_connector_pdata, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = DSS_ENABLE_GPIO, - .i2c_bus_num = -1, +static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = DSS_ENABLE_GPIO, }; -static struct omap_dss_device omap3_stalker_dvi_device = { - .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct platform_device omap3stalker_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &omap3stalker_tfp410_pdata, +}; + +static struct connector_atv_platform_data omap3stalker_tv_pdata = { + .name = "tv", + .source = "venc.0", +#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO) + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, +#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) + .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE, +#endif + .invert_polarity = false, }; -static struct omap_dss_device *omap3_stalker_dss_devices[] = { - &omap3_stalker_tv_device, - &omap3_stalker_dvi_device, +static struct platform_device omap3stalker_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &omap3stalker_tv_pdata, }; static struct omap_dss_board_info omap3_stalker_dss_data = { - .num_devices = ARRAY_SIZE(omap3_stalker_dss_devices), - .devices = omap3_stalker_dss_devices, - .default_device = &omap3_stalker_dvi_device, + .default_display_name = "dvi", }; static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = { @@ -356,6 +366,9 @@ static struct usbhs_phy_data phy_data[] __initdata = { static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, + &omap3stalker_tfp410_device, + &omap3stalker_dvi_connector_device, + &omap3stalker_tv_connector_device, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 5748b5d06c238550c5f80387777379ea446bb685..f6d3841119118c6cfe3c56664a4dc160ae2f2d05 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -72,6 +72,9 @@ #define OVERO_SMSC911X2_CS 4 #define OVERO_SMSC911X2_GPIO 65 +/* whether to register LCD35 instead of LCD43 */ +static bool overo_use_lcd35; + #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) @@ -149,78 +152,94 @@ static inline void __init overo_init_smsc911x(void) { return; } #define OVERO_GPIO_LCD_EN 144 #define OVERO_GPIO_LCD_BL 145 -static struct tfp410_platform_data dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = -1, +static struct connector_atv_platform_data overo_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, }; -static struct omap_dss_device overo_dvi_device = { - .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct platform_device overo_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &overo_tv_pdata, }; -static struct omap_dss_device overo_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static const struct display_timing overo_lcd43_videomode = { + .pixelclock = { 0, 9200000, 0 }, + + .hactive = { 0, 480, 0 }, + .hfront_porch = { 0, 8, 0 }, + .hback_porch = { 0, 4, 0 }, + .hsync_len = { 0, 41, 0 }, + + .vactive = { 0, 272, 0 }, + .vfront_porch = { 0, 4, 0 }, + .vback_porch = { 0, 2, 0 }, + .vsync_len = { 0, 10, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct panel_generic_dpi_data lcd43_panel = { - .name = "samsung_lte430wq_f0c", - .num_gpios = 2, - .gpios = { - OVERO_GPIO_LCD_EN, - OVERO_GPIO_LCD_BL - }, +static struct panel_dpi_platform_data overo_lcd43_pdata = { + .name = "lcd43", + .source = "dpi.0", + + .data_lines = 24, + + .display_timing = &overo_lcd43_videomode, + + .enable_gpio = OVERO_GPIO_LCD_EN, + .backlight_gpio = OVERO_GPIO_LCD_BL, }; -static struct omap_dss_device overo_lcd43_device = { - .name = "lcd43", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", - .data = &lcd43_panel, - .phy.dpi.data_lines = 24, +static struct platform_device overo_lcd43_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &overo_lcd43_pdata, }; -#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ - defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) -static struct panel_generic_dpi_data lcd35_panel = { - .num_gpios = 2, - .gpios = { - OVERO_GPIO_LCD_EN, - OVERO_GPIO_LCD_BL - }, +static struct connector_dvi_platform_data overo_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = 3, }; -static struct omap_dss_device overo_lcd35_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "lcd35", - .driver_name = "lgphilips_lb035q02_panel", - .phy.dpi.data_lines = 24, - .data = &lcd35_panel, +static struct platform_device overo_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &overo_dvi_connector_pdata, }; -#endif -static struct omap_dss_device *overo_dss_devices[] = { - &overo_dvi_device, - &overo_tv_device, -#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ - defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) - &overo_lcd35_device, -#endif - &overo_lcd43_device, +static struct encoder_tfp410_platform_data overo_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, +}; + +static struct platform_device overo_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &overo_tfp410_pdata, }; static struct omap_dss_board_info overo_dss_data = { - .num_devices = ARRAY_SIZE(overo_dss_devices), - .devices = overo_dss_devices, - .default_device = &overo_dvi_device, + .default_display_name = "lcd43", }; +static void __init overo_display_init(void) +{ + omap_display_init(&overo_dss_data); + + if (!overo_use_lcd35) + platform_device_register(&overo_lcd43_device); + platform_device_register(&overo_tfp410_device); + platform_device_register(&overo_dvi_connector_device); + platform_device_register(&overo_tv_connector_device); +} + static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -408,24 +427,41 @@ static int __init overo_i2c_init(void) return 0; } +static struct panel_lb035q02_platform_data overo_lcd35_pdata = { + .name = "lcd35", + .source = "dpi.0", + + .data_lines = 24, + + .enable_gpio = OVERO_GPIO_LCD_EN, + .backlight_gpio = OVERO_GPIO_LCD_BL, +}; + +/* + * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The + * selection is done based on the overo_use_lcd35 field. If new SPI + * devices are added here, extra work is needed to make only the lgphilips panel + * affected by the overo_use_lcd35 field. + */ static struct spi_board_info overo_spi_board_info[] __initdata = { -#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ - defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) { - .modalias = "lgphilips_lb035q02_panel-spi", + .modalias = "panel_lgphilips_lb035q02", .bus_num = 1, .chip_select = 1, .max_speed_hz = 500000, .mode = SPI_MODE_3, + .platform_data = &overo_lcd35_pdata, }, -#endif }; static int __init overo_spi_init(void) { overo_ads7846_init(); - spi_register_board_info(overo_spi_board_info, - ARRAY_SIZE(overo_spi_board_info)); + + if (overo_use_lcd35) { + spi_register_board_info(overo_spi_board_info, + ARRAY_SIZE(overo_spi_board_info)); + } return 0; } @@ -463,11 +499,13 @@ static void __init overo_init(void) { int ret; + if (strstr(boot_command_line, "omapdss.def_disp=lcd35")) + overo_use_lcd35 = true; + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); omap_hsmmc_init(mmc); - omap_display_init(&overo_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); @@ -484,6 +522,8 @@ static void __init overo_init(void) overo_init_keys(); omap_twl4030_audio_init("overo", NULL); + overo_display_init(); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 9c2dd102fbbb3968bf65a5775e11b70d8cdde5e2..c3270c0f1fce47724b0aba71d8f1ea388b94f445 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -45,6 +45,8 @@ #include #include +#include