fw-api: CL 15406205 - update fw common interface files (0fc34e93) · Commits · e / devices / android_kernel_fairphone_FP5

fw/wmi_tlv_defs.h

+3 −1

Original line number	Diff line number	Diff line
		@@ -1197,6 +1197,7 @@ typedef enum {
		WMITLV_TAG_STRUC_wmi_roam_btm_request_candidate_info_tlv_param,
		WMITLV_TAG_STRUC_wmi_thermal_stats_cmd_fixed_param,
		WMITLV_TAG_STRUC_wmi_thermal_throt_temp_range_stats,
		WMITLV_TAG_STRUC_wmi_ctrl_path_awgn_stats_struct,
		} WMITLV_TAG_ID;

		/*
		@@ -6154,7 +6155,8 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PEER_STATS_INFO_EVENTID);
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_ctrl_path_mem_stats_struct, ctrl_path_mem_stats, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_ctrl_path_twt_stats_struct, ctrl_path_twt_stats, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_ctrl_path_calibration_stats_struct, ctrl_path_calibration_stats, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_ctrl_path_dfs_channel_stats_struct, ctrl_path_dfs_channel_stats, WMITLV_SIZE_VAR)
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_ctrl_path_dfs_channel_stats_struct, ctrl_path_dfs_channel_stats, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_ctrl_path_awgn_stats_struct, ctrl_path_awgn_stats, WMITLV_SIZE_VAR)
		WMITLV_CREATE_PARAM_STRUC(WMI_CTRL_PATH_STATS_EVENTID);

		#define WMITLV_TABLE_WMI_RADIO_CHAN_STATS_EVENTID(id, op, buf, len) \

fw/wmi_unified.h

+72 −0

Original line number	Diff line number	Diff line
		@@ -10244,6 +10244,77 @@ typedef struct {
		#define WMI_CTRL_PATH_CALIBRATION_STATS_IS_PERIODIC_CAL_GET(cal_info) WMI_GET_BITS(cal_info, 13, 1)
		#define WMI_CTRL_PATH_CALIBRATION_STATS_IS_PERIODIC_CAL_SET(cal_info, is_periodic) WMI_SET_BITS(cal_info, 13, 1, is_periodic)

		/* 0=20MHz, 1=40MHz, 2=80MHz, 3=160MHz, 4=240MHz, 5=320MHz */
		#define WMI_AWGN_MAX_BW 6

		typedef struct {
		/* TLV tag and len; tag equals
		* WMITLV_TAG_STRUC_wmi_ctrl_path_awgn_stats_struct
		* For 6G FCC test we have to monitor channel interference and switch
		* to non-interference channel.
		* Additive White Gaussian Noise (AWGN) interference detection logic
		* is used to detect interference based upon CCA / BW drop / packet drop.
		* Once AWGN interference is detected, the target sends
		* WMI_DCS_INTERFERENCE_EVENTID to host for channel change/BW change.
		* This stats struct is used to get info about how many times these
		* CCA_Interference/BW_Drop/Pkt_Drop indicators of AWGN occur.
		*/
		A_UINT32 tlv_header;
		/*
		* AWGN WMI event sent count
		* This is used to inform how many WMI_DCS_INTERFERENCE_EVENTID have been
		* sent to the host.
		* WMI_DCS_INTERFERENCE_EVENTID is sent whenever one or more of
		* CCA_Int/BW_Drop/Channel_Change(Pkt_Drop) happen.
		*/
		A_UINT32 awgn_send_evt_cnt;
		/* AWGN primary int count */
		A_UINT32 awgn_pri_int_cnt;
		/* AWGN secondary int count */
		A_UINT32 awgn_sec_int_cnt;
		/*
		* AWGN pkt drop trigger count
		* This shows how many times the presence of interference on the
		* primary BW has been inferred due to pkt drops.
		* WMI_DCS_INTERFERENCE_EVENTID wil be sent whenever there is
		* interference on Primary Channel.
		*/
		A_UINT32 awgn_pkt_drop_trigger_cnt;
		/* awgn pkt drop trigger reset count */
		A_UINT32 awgn_pkt_drop_trigger_reset_cnt;
		/*
		* AWGN bandwidth drop count
		* This is used to inform count for any frame transmitted on lower BW
		* than configured BW.
		* WMI_DCS_INTERFERENCE_EVENTID wil be sent whenever there is BW drop.
		*/
		A_UINT32 awgn_bw_drop_cnt;
		/* AWGN bandwidth drop reset count */
		A_UINT32 awgn_bw_drop_reset_cnt;
		/*
		* AWGN CCA int count
		* This is used to inform the interference based on CCA registers.
		* WMI_DCS_INTERFERENCE_EVENTID wil be sent whenever there is CCA
		* interference.
		*/
		A_UINT32 awgn_cca_int_cnt;
		/* AWGN cca int reset count */
		A_UINT32 awgn_cca_int_reset_cnt;
		/* AWGN cca ack blk count */
		A_UINT32 awgn_cca_ack_blk_cnt;
		/* AWGN cca ack blk reset count */
		A_UINT32 awgn_cca_ack_reset_cnt;
		/*
		* AWGN int BW cnt used to store interference occured at 20/40/80/160MHz
		* bw_cnt[0] counts interference detections in 20 MHz BW,
		* bw_cnt[1] counts interference detections in 40 MHz BW,
		* bw_cnt[2] counts interference detections in 80 MHz BW,
		* bw_cnt[3] counts interference detections in 160 MHz BW,
		* bw_cnt[4] and bw_cnt[6] are reserved for 240 MHz and 320 MHz.
		*/
		A_UINT32 awgn_int_bw_cnt[WMI_AWGN_MAX_BW];
		} wmi_ctrl_path_awgn_stats_struct;

		typedef struct {
		/** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ctrl_path_dfs_channel_stats_struct*/
		A_UINT32 tlv_header;
		@@ -27474,6 +27545,7 @@ typedef enum {
		WMI_REQUEST_CTRL_PATH_TWT_STAT = 4,
		WMI_REQUEST_CTRL_PATH_CALIBRATION_STAT = 5,
		WMI_REQUEST_CTRL_PATH_DFS_CHANNEL_STAT = 6,
		WMI_REQUEST_CTRL_PATH_AWGN_STAT = 7,
		} wmi_ctrl_path_stats_id;

		typedef enum {

fw/wmi_version.h

+1 −1

Original line number	Diff line number	Diff line
		@@ -36,7 +36,7 @@
		#define __WMI_VER_MINOR_ 0
		/** WMI revision number has to be incremented when there is a
		* change that may or may not break compatibility. */
		#define __WMI_REVISION_ 1049
		#define __WMI_REVISION_ 1050

		/** The Version Namespace should not be normally changed. Only
		* host and firmware of the same WMI namespace will work