ARM: dts: msm: enable bluetooth for direwolf vm (0d80ad0f) · Commits · e / devices / android_kernel_fairphone_FP5

qcom/direwolf-cnss.dtsi

0 → 100644

+50 −0

Original line number	Diff line number	Diff line

		&soc {
		/* PWR_CTR2_VDD_1P8 supply */
		vreg_conn_1p8: vreg_conn_1p8 {
		compatible = "regulator-fixed";
		regulator-name = "vreg_conn_1p8";
		pinctrl-names = "default";
		pinctrl-0 = <&conn_power_1p8_active>;
		startup-delay-us = <4000>;
		enable-active-high;
		gpio = <&tlmm 128 0>;
		};

		/* PWR_CTR1_VDD_PA supply */
		vreg_conn_pa: vreg_conn_pa {
		compatible = "regulator-fixed";
		regulator-name = "vreg_conn_pa";
		pinctrl-names = "default";
		pinctrl-0 = <&conn_power_pa_active>;
		startup-delay-us = <4000>;
		enable-active-high;
		gpio = <&tlmm 129 0>;
		};

		bluetooth: bt-qca-auto-converged {
		compatible = "qcom,qca-auto-converged";
		pinctrl-names = "default";
		pinctrl-0 = <&bt_en_active>;
		/* BT_EN */
		qcom,bt-reset-gpio = <&tlmm 126 0>;
		/* PWR_CTR1_VDD_PA */
		qcom,bt-vdd-ctrl1-supply = <&vreg_conn_pa>;
		/* PWR_CTR2_VDD_1P8 */
		qcom,bt-vdd-ctrl2-supply = <&vreg_conn_1p8>;
		qcom,bt-vdd-aon-supply = <&pm8540_e0_s4>;
		qcom,bt-vdd-rfa1-supply = <&pm8540_g0_l6>;
		qcom,bt-vdd-rfa2-supply = <&pm8540_a0_l15>;

		/* <vol_min, vol_max, load_curr, is_retention_supp> */
		qcom,bt-vdd-aon-config = <1055000 1055000 0 0>;
		/* No vol setting for bypass LDOs */
		qcom,bt-vdd-rfa1-config = <0 0 0 0>;
		qcom,bt-vdd-rfa2-config = <0 0 0 0>;
		};
		};

		&qupv3_se2_4uart {
		status = "ok";
		};

+39 −0

Original line number	Diff line number	Diff line
		@@ -1847,4 +1847,43 @@
		};
		};
		};

		bt_en_active: bt_en_active {
		mux {
		pins = "gpio126";
		function = "gpio";
		};

		config {
		pins = "gpio126";
		drive-strength = <2>;
		bias-pull-down;
		};
		};

		conn_power_1p8_active: conn_power_1p8_active {
		mux {
		pins = "gpio128";
		function = "gpio";
		};

		config {
		pins = "gpio128";
		drive-strength = <2>;
		bias-pull-up;
		};
		};

		conn_power_pa_active: conn_power_pa_active {
		mux {
		pins = "gpio129";
		function = "gpio";
		};

		config {
		pins = "gpio129";
		drive-strength = <2>;
		bias-pull-up;
		};
		};
		};

+15 −4

Original line number	Diff line number	Diff line
		@@ -305,12 +305,22 @@
		regulator-max-microvolt = <1260000>;
		};

		S4E0: pm8540_e0_s4: regulator-pm8540_e0-s4 {
		regulator-name = "smpe4";
		regulator-min-microvolt = <320000>;
		regulator-max-microvolt = <2040000>;
		};

		L5A0: pm8540_a0_l5: regulator-pm8540_a0-l5 {
		regulator-name = "ldoa5";
		regulator-min-microvolt = <720000>;
		regulator-max-microvolt = <950000>;
		};

		L6G0: pm8540_g0_l6: regulator-pm8540_g0-l6 {
		regulator-name = "ldog6";
		};

		L7A0: pm8540_a0_l7: regulator-pm8540_a0-l7 {
		regulator-name = "ldoa7";
		regulator-min-microvolt = <1620000>;
		@@ -346,6 +356,10 @@
		regulator-min-microvolt = <2970000>;
		regulator-max-microvolt = <3544000>;
		};

		L15A0: pm8540_a0_l15: regulator-pm8540_a0-l15 {
		regulator-name = "ldoa15";
		};
		};

		&firmware {
		@@ -359,6 +373,7 @@
		#include "pm8540-vm.dtsi"
		#include "direwolf-vm-audio.dtsi"
		#include "direwolf-vm-usb.dtsi"
		#include "direwolf-cnss.dtsi"

		&qupv3_0 {
		/delete-property/ qcom,msm-bus,num-paths;
		@@ -374,7 +389,3 @@
		/delete-property/ qcom,msm-bus,num-paths;
		/delete-property/ qcom,msm-bus,vectors-bus-ids;
		};

		&qupv3_se2_4uart {
		status = "ok";
		};