Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 0c347bec authored by Lina Iyer's avatar Lina Iyer Committed by Todd Kjos
Browse files

FROMLIST: dt-bindings/interrupt-controller: pdc: add SPI config register 



In addition to configuring the PDC, additional registers that interface
the GIC have to be configured to match the GPIO type. The registers on
some QCOM SoCs are access restricted, while on other SoCs are not. They
SoCs with access restriction to these SPI registers need to be written
from the firmware using the SCM interface. Add a flag to indicate if the
register is to be written using SCM interface.

Cc: devicetree@vger.kernel.org
Signed-off-by: default avatarLina Iyer <ilina@codeaurora.org>
Reviewed-by: default avatarRob Herring <robh@kernel.org>

BUG: 141169320
TEST: Build and boot

Change-Id: I0f6dfc11fc4df4b0744b7c9372eaf4c7be3a82d6
Signed-off-by: default avatarMaulik Shah <mkshah@codeaurora.org>
Link: https://patchwork.kernel.org/patch/11145355
parent 18af63b3

Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt

+12 −1
Original line number Diff line number Diff line
@@ -24,6 +24,9 @@ Properties: 
	Usage: required

	Value type: <prop-encoded-array>

	Definition: Specifies the base physical address for PDC hardware.

		    Optionally, specify the PDC's GIC interface registers that

		    need to be configured for wakeup capable GPIOs routed to

		    the PDC.



- interrupt-cells:

	Usage: required
@@ -50,15 +53,23 @@ Properties: 
		    The second element is the GIC hwirq number for the PDC port.

		    The third element is the number of interrupts in sequence.



- qcom,scm-spi-cfg:

	Usage: optional

	Value type: <bool>

	Definition: Specifies if the SPI configuration registers have to be

		    written from the firmware. Sometimes the PDC interface

		    register to the GIC can only be written from the firmware.



Example:



	pdc: interrupt-controller@b220000 {

		compatible = "qcom,sdm845-pdc";

		reg = <0xb220000 0x30000>;

		reg = <0 0x0b220000 0 0x30000>, <0 0x179900f0 0 0x60>;

		qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>;

		#interrupt-cells = <2>;

		interrupt-parent = <&intc>;

		interrupt-controller;

		qcom,scm-spi-cfg;

	};



DT binding of a device that wants to use the GIC SPI 514 as a wakeup