Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 0b559d5c authored by Stefan Wahren's avatar Stefan Wahren
Browse files

ARM: dts: bcm283x: Add missing GPIO line names 



The GPIO sysfs is deprecated and disabled in the defconfig files.
So in order to motivate the usage of the new GPIO character device API
add the missing GPIO line names for Raspberry Pi 2 and 3. In the lack
of full schematics i would leave all undocumented pins as unnamed.

Signed-off-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
Tested-by: default avatarPeter Robinson <pbrobinson@gmail.com>
Reviewed-by: default avatarEric Anholt <eric@anholt.net>
parent ef528c37

arch/arm/boot/dts/bcm2836-rpi-2-b.dts

+66 −0
Original line number Diff line number Diff line
@@ -28,6 +28,72 @@ 
};



&gpio {

	/*

	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and

	 * the official GPU firmware DT blob.

	 *

	 * Legend:

	 * "NC" = not connected (no rail from the SoC)

	 * "FOO" = GPIO line named "FOO" on the schematic

	 * "FOO_N" = GPIO line named "FOO" on schematic, active low

	 */

	gpio-line-names = "ID_SDA",

			  "ID_SCL",

			  "SDA1",

			  "SCL1",

			  "GPIO_GCLK",

			  "GPIO5",

			  "GPIO6",

			  "SPI_CE1_N",

			  "SPI_CE0_N",

			  "SPI_MISO",

			  "SPI_MOSI",

			  "SPI_SCLK",

			  "GPIO12",

			  "GPIO13",

			  /* Serial port */

			  "TXD0",

			  "RXD0",

			  "GPIO16",

			  "GPIO17",

			  "GPIO18",

			  "GPIO19",

			  "GPIO20",

			  "GPIO21",

			  "GPIO22",

			  "GPIO23",

			  "GPIO24",

			  "GPIO25",

			  "GPIO26",

			  "GPIO27",

			  "SDA0",

			  "SCL0",

			  "", /* GPIO30 */

			  "LAN_RUN",

			  "CAM_GPIO1",

			  "", /* GPIO33 */

			  "", /* GPIO34 */

			  "PWR_LOW_N",

			  "", /* GPIO36 */

			  "", /* GPIO37 */

			  "USB_LIMIT",

			  "", /* GPIO39 */

			  "PWM0_OUT",

			  "CAM_GPIO0",

			  "SMPS_SCL",

			  "SMPS_SDA",

			  "ETHCLK",

			  "PWM1_OUT",

			  "HDMI_HPD_N",

			  "STATUS_LED",

			  /* Used by SD Card */

			  "SD_CLK_R",

			  "SD_CMD_R",

			  "SD_DATA0_R",

			  "SD_DATA1_R",

			  "SD_DATA2_R",

			  "SD_DATA3_R";



	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;



	/* I2S interface */

arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts

+70 −0
Original line number Diff line number Diff line
@@ -52,6 +52,76 @@ 
	};

};



&gpio {

	/*

	 * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and

	 * the official GPU firmware DT blob.

	 *

	 * Legend:

	 * "NC" = not connected (no rail from the SoC)

	 * "FOO" = GPIO line named "FOO" on the schematic

	 * "FOO_N" = GPIO line named "FOO" on schematic, active low

	 */

	gpio-line-names = "ID_SDA",

			  "ID_SCL",

			  "SDA1",

			  "SCL1",

			  "GPIO_GCLK",

			  "GPIO5",

			  "GPIO6",

			  "SPI_CE1_N",

			  "SPI_CE0_N",

			  "SPI_MISO",

			  "SPI_MOSI",

			  "SPI_SCLK",

			  "GPIO12",

			  "GPIO13",

			  /* Serial port */

			  "TXD1",

			  "RXD1",

			  "GPIO16",

			  "GPIO17",

			  "GPIO18",

			  "GPIO19",

			  "GPIO20",

			  "GPIO21",

			  "GPIO22",

			  "GPIO23",

			  "GPIO24",

			  "GPIO25",

			  "GPIO26",

			  "GPIO27",

			  "HDMI_HPD_N",

			  "STATUS_LED_G",

			  /* Used by BT module */

			  "CTS0",

			  "RTS0",

			  "TXD0",

			  "RXD0",

			  /* Used by Wifi */

			  "SD1_CLK",

			  "SD1_CMD",

			  "SD1_DATA0",

			  "SD1_DATA1",

			  "SD1_DATA2",

			  "SD1_DATA3",

			  "PWM0_OUT",

			  "PWM1_OUT",

			  "ETHCLK",

			  "WIFI_CLK",

			  "SDA0",

			  "SCL0",

			  "SMPS_SCL",

			  "SMPS_SDA",

			  /* Used by SD Card */

			  "SD_CLK_R",

			  "SD_CMD_R",

			  "SD_DATA0_R",

			  "SD_DATA1_R",

			  "SD_DATA2_R",

			  "SD_DATA3_R";

};



&hdmi {

	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;

};

arch/arm/boot/dts/bcm2837-rpi-3-b.dts

+70 −0
Original line number Diff line number Diff line
@@ -47,6 +47,76 @@ 
	};

};



&gpio {

	/*

	 * Taken from rpi_SCH_3b_1p2_reduced.pdf and

	 * the official GPU firmware DT blob.

	 *

	 * Legend:

	 * "NC" = not connected (no rail from the SoC)

	 * "FOO" = GPIO line named "FOO" on the schematic

	 * "FOO_N" = GPIO line named "FOO" on schematic, active low

	 */

	gpio-line-names = "ID_SDA",

			  "ID_SCL",

			  "SDA1",

			  "SCL1",

			  "GPIO_GCLK",

			  "GPIO5",

			  "GPIO6",

			  "SPI_CE1_N",

			  "SPI_CE0_N",

			  "SPI_MISO",

			  "SPI_MOSI",

			  "SPI_SCLK",

			  "GPIO12",

			  "GPIO13",

			  /* Serial port */

			  "TXD1",

			  "RXD1",

			  "GPIO16",

			  "GPIO17",

			  "GPIO18",

			  "GPIO19",

			  "GPIO20",

			  "GPIO21",

			  "GPIO22",

			  "GPIO23",

			  "GPIO24",

			  "GPIO25",

			  "GPIO26",

			  "GPIO27",

			  "", /* GPIO 28 */

			  "LAN_RUN_BOOT",

			  /* Used by BT module */

			  "CTS0",

			  "RTS0",

			  "TXD0",

			  "RXD0",

			  /* Used by Wifi */

			  "SD1_CLK",

			  "SD1_CMD",

			  "SD1_DATA0",

			  "SD1_DATA1",

			  "SD1_DATA2",

			  "SD1_DATA3",

			  "PWM0_OUT",

			  "PWM1_OUT",

			  "ETHCLK",

			  "WIFI_CLK",

			  "SDA0",

			  "SCL0",

			  "SMPS_SCL",

			  "SMPS_SDA",

			  /* Used by SD Card */

			  "SD_CLK_R",

			  "SD_CMD_R",

			  "SD_DATA0_R",

			  "SD_DATA1_R",

			  "SD_DATA2_R",

			  "SD_DATA3_R";

};



&pwm {

	pinctrl-names = "default";

	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;