Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 04b13de6 authored by Linus Walleij's avatar Linus Walleij
Browse files

pinctrl/coh901: retire ancient GPIO block versions 



As the non-U335 U300 variants are retired from the ARM tree,
also delete the pinctrl driver codepaths for these variants.

Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent fcb28d2e

arch/arm/mach-u300/core.c

+0 −1
Original line number Diff line number Diff line
@@ -1440,7 +1440,6 @@ static struct platform_device pinctrl_device = { 
 * GPIO block, with different number of ports.

 */

static struct u300_gpio_platform u300_gpio_plat = {

	.variant = U300_GPIO_COH901571_3_BS335,

	.ports = 7,

	.gpio_base = 0,

	.gpio_irq_base = IRQ_U300_GPIO_BASE,

arch/arm/mach-u300/include/mach/gpio-u300.h

+1 −12
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2007-2011 ST-Ericsson AB

 * Copyright (C) 2007-2012 ST-Ericsson AB

 * License terms: GNU General Public License (GPL) version 2

 * GPIO block resgister definitions and inline macros for

 * U300 GPIO COH 901 335 or COH 901 571/3
@@ -9,25 +9,14 @@ 
#ifndef __MACH_U300_GPIO_U300_H

#define __MACH_U300_GPIO_U300_H



/**

 * enum u300_gpio_variant - the type of U300 GPIO employed

 */

enum u300_gpio_variant {

	U300_GPIO_COH901335,

	U300_GPIO_COH901571_3_BS335,

	U300_GPIO_COH901571_3_BS365,

};



/**

 * struct u300_gpio_platform - U300 GPIO platform data

 * @variant: IP block variant

 * @ports: number of GPIO block ports

 * @gpio_base: first GPIO number for this block (use a free range)

 * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)

 * @pinctrl_device: pin control device to spawn as child

 */

struct u300_gpio_platform {

	enum u300_gpio_variant variant;

	u8 ports;

	int gpio_base;

	int gpio_irq_base;

drivers/pinctrl/pinctrl-coh901.c

+42 −176
Original line number Diff line number Diff line 
/*

 * U300 GPIO module.

 *

 * Copyright (C) 2007-2011 ST-Ericsson AB

 * Copyright (C) 2007-2012 ST-Ericsson AB

 * License terms: GNU General Public License (GPL) version 2

 * This can driver either of the two basic GPIO cores

 * available in the U300 platforms:

 * COH 901 335   - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)

 * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)

 * Author: Linus Walleij <linus.walleij@linaro.org>

 * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
@@ -27,16 +24,19 @@ 
#include <mach/gpio-u300.h>

#include "pinctrl-coh901.h"



#define U300_GPIO_PORT_STRIDE				(0x30)

/*

 * Register definitions for COH 901 335 variant

 * Control Register 32bit (R/W)

 * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores

 * gives the number of GPIO pins.

 * bit 8-2  (mask 0x000001FC) contains the core version ID.

 */

#define U300_335_PORT_STRIDE				(0x1C)

/* Port X Pin Data Register 32bit, this is both input and output (R/W) */

#define U300_335_PXPDIR					(0x00)

#define U300_335_PXPDOR					(0x00)

/* Port X Pin Config Register 32bit (R/W) */

#define U300_335_PXPCR					(0x04)

/* This register layout is the same in both blocks */

#define U300_GPIO_CR					(0x00)

#define U300_GPIO_CR_SYNC_SEL_ENABLE			(0x00000002UL)

#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE			(0x00000001UL)

#define U300_GPIO_PXPDIR				(0x04)

#define U300_GPIO_PXPDOR				(0x08)

#define U300_GPIO_PXPCR					(0x0C)

#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)

#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)

#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
@@ -44,53 +44,17 @@ 
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)

#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)

#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)

/* Port X Interrupt Event Register 32bit (R/W) */

#define U300_335_PXIEV					(0x08)

/* Port X Interrupt Enable Register 32bit (R/W) */

#define U300_335_PXIEN					(0x0C)

/* Port X Interrupt Force Register 32bit (R/W) */

#define U300_335_PXIFR					(0x10)

/* Port X Interrupt Config Register 32bit (R/W) */

#define U300_335_PXICR					(0x14)

/* This register layout is the same in both blocks */

#define U300_GPIO_PXPER					(0x10)

#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)

#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)

#define U300_GPIO_PXIEV					(0x14)

#define U300_GPIO_PXIEN					(0x18)

#define U300_GPIO_PXIFR					(0x1C)

#define U300_GPIO_PXICR					(0x20)

#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)

#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)

#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)

#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)

/* Port X Pull-up Enable Register 32bit (R/W) */

#define U300_335_PXPER					(0x18)

/* This register layout is the same in both blocks */

#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)

#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)

/* Control Register 32bit (R/W) */

#define U300_335_CR					(0x54)

#define U300_335_CR_BLOCK_CLOCK_ENABLE			(0x00000001UL)



/*

 * Register definitions for COH 901 571 / 3 variant

 */

#define U300_571_PORT_STRIDE				(0x30)

/*

 * Control Register 32bit (R/W)

 * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores

 * gives the number of GPIO pins.

 * bit 8-2  (mask 0x000001FC) contains the core version ID.

 */

#define U300_571_CR					(0x00)

#define U300_571_CR_SYNC_SEL_ENABLE			(0x00000002UL)

#define U300_571_CR_BLOCK_CLKRQ_ENABLE			(0x00000001UL)

/*

 * These registers have the same layout and function as the corresponding

 * COH 901 335 registers, just at different offset.

 */

#define U300_571_PXPDIR					(0x04)

#define U300_571_PXPDOR					(0x08)

#define U300_571_PXPCR					(0x0C)

#define U300_571_PXPER					(0x10)

#define U300_571_PXIEV					(0x14)

#define U300_571_PXIEN					(0x18)

#define U300_571_PXIFR					(0x1C)

#define U300_571_PXICR					(0x20)



/* 8 bits per port, no version has more than 7 ports */

#define U300_GPIO_PINS_PER_PORT 8
@@ -149,8 +113,6 @@ struct u300_gpio_confdata { 


/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */

#define BS335_GPIO_NUM_PORTS 7

/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */

#define BS365_GPIO_NUM_PORTS 5



#define U300_FLOATING_INPUT { \

	.bias_mode = PIN_CONFIG_BIAS_HIGH_IMPEDANCE, \
@@ -172,7 +134,6 @@ struct u300_gpio_confdata { 
	.outval = 1, \

}





/* Initial configuration */

static const struct __initconst u300_gpio_confdata

bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
@@ -255,66 +216,6 @@ bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { 
	}

};



static const struct __initconst u300_gpio_confdata

bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {

	/* Port 0, pins 0-7 */

	{

		U300_FLOATING_INPUT,

		U300_OUTPUT_LOW,

		U300_FLOATING_INPUT,

		U300_OUTPUT_LOW,

		U300_OUTPUT_LOW,

		U300_OUTPUT_LOW,

		U300_PULL_UP_INPUT,

		U300_FLOATING_INPUT,

	},

	/* Port 1, pins 0-7 */

	{

		U300_OUTPUT_LOW,

		U300_FLOATING_INPUT,

		U300_OUTPUT_LOW,

		U300_FLOATING_INPUT,

		U300_FLOATING_INPUT,

		U300_OUTPUT_HIGH,

		U300_OUTPUT_LOW,

		U300_OUTPUT_LOW,

	},

	/* Port 2, pins 0-7 */

	{

		U300_FLOATING_INPUT,

		U300_PULL_UP_INPUT,

		U300_OUTPUT_LOW,

		U300_OUTPUT_LOW,

		U300_PULL_UP_INPUT,

		U300_PULL_UP_INPUT,

		U300_PULL_UP_INPUT,

		U300_PULL_UP_INPUT,

	},

	/* Port 3, pins 0-7 */

	{

		U300_PULL_UP_INPUT,

		U300_PULL_UP_INPUT,

		U300_PULL_UP_INPUT,

		U300_PULL_UP_INPUT,

		U300_PULL_UP_INPUT,

		U300_PULL_UP_INPUT,

		U300_PULL_UP_INPUT,

		U300_PULL_UP_INPUT,

	},

	/* Port 4, pins 0-7 */

	{

		U300_PULL_UP_INPUT,

		U300_PULL_UP_INPUT,

		U300_PULL_UP_INPUT,

		U300_PULL_UP_INPUT,

		/* These 4 pins doesn't exist on DB3210 */

		U300_OUTPUT_LOW,

		U300_OUTPUT_LOW,

		U300_OUTPUT_LOW,

		U300_OUTPUT_LOW,

	}

};



/**

 * to_u300_gpio() - get the pointer to u300_gpio

 * @chip: the gpio chip member of the structure u300_gpio
@@ -716,13 +617,7 @@ static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio, 
			const struct u300_gpio_confdata *conf;

			int offset = (i*8) + j;



			if (plat->variant == U300_GPIO_COH901571_3_BS335)

			conf = &bs335_gpio_config[i][j];

			else if (plat->variant == U300_GPIO_COH901571_3_BS365)

				conf = &bs365_gpio_config[i][j];

			else

				break;



			u300_gpio_init_pin(gpio, offset, conf);

		}

	}
@@ -796,50 +691,27 @@ static int __init u300_gpio_probe(struct platform_device *pdev) 
		goto err_no_ioremap;

	}



	if (plat->variant == U300_GPIO_COH901335) {

		dev_info(gpio->dev,

			 "initializing GPIO Controller COH 901 335\n");

		gpio->stride = U300_335_PORT_STRIDE;

		gpio->pcr = U300_335_PXPCR;

		gpio->dor = U300_335_PXPDOR;

		gpio->dir = U300_335_PXPDIR;

		gpio->per = U300_335_PXPER;

		gpio->icr = U300_335_PXICR;

		gpio->ien = U300_335_PXIEN;

		gpio->iev = U300_335_PXIEV;

		ifr = U300_335_PXIFR;



		/* Turn on the GPIO block */

		writel(U300_335_CR_BLOCK_CLOCK_ENABLE,

		       gpio->base + U300_335_CR);

	} else if (plat->variant == U300_GPIO_COH901571_3_BS335 ||

		   plat->variant == U300_GPIO_COH901571_3_BS365) {

	dev_info(gpio->dev,

		 "initializing GPIO Controller COH 901 571/3\n");

		gpio->stride = U300_571_PORT_STRIDE;

		gpio->pcr = U300_571_PXPCR;

		gpio->dor = U300_571_PXPDOR;

		gpio->dir = U300_571_PXPDIR;

		gpio->per = U300_571_PXPER;

		gpio->icr = U300_571_PXICR;

		gpio->ien = U300_571_PXIEN;

		gpio->iev = U300_571_PXIEV;

		ifr = U300_571_PXIFR;



		val = readl(gpio->base + U300_571_CR);

	gpio->stride = U300_GPIO_PORT_STRIDE;

	gpio->pcr = U300_GPIO_PXPCR;

	gpio->dor = U300_GPIO_PXPDOR;

	gpio->dir = U300_GPIO_PXPDIR;

	gpio->per = U300_GPIO_PXPER;

	gpio->icr = U300_GPIO_PXICR;

	gpio->ien = U300_GPIO_PXIEN;

	gpio->iev = U300_GPIO_PXIEV;

	ifr = U300_GPIO_PXIFR;



	val = readl(gpio->base + U300_GPIO_CR);

	dev_info(gpio->dev, "COH901571/3 block version: %d, " \

		 "number of cores: %d totalling %d pins\n",

		 ((val & 0x000001FC) >> 2),

		 ((val & 0x0000FE00) >> 9),

		 ((val & 0x0000FE00) >> 9) * 8);

		writel(U300_571_CR_BLOCK_CLKRQ_ENABLE,

		       gpio->base + U300_571_CR);

	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE,

	       gpio->base + U300_GPIO_CR);

	u300_gpio_init_coh901571(gpio, plat);

	} else {

		dev_err(gpio->dev, "unknown block variant\n");

		err = -ENODEV;

		goto err_unknown_variant;

	}



	/* Add each port with its IRQ separately */

	INIT_LIST_HEAD(&gpio->port_list);
@@ -906,7 +778,6 @@ static int __init u300_gpio_probe(struct platform_device *pdev) 
err_no_chip:

err_no_port:

	u300_gpio_free_ports(gpio);

err_unknown_variant:

	iounmap(gpio->base);

err_no_ioremap:

	release_mem_region(gpio->memres->start, resource_size(gpio->memres));
@@ -923,16 +794,11 @@ static int __init u300_gpio_probe(struct platform_device *pdev) 


static int __exit u300_gpio_remove(struct platform_device *pdev)

{

	struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);

	struct u300_gpio *gpio = platform_get_drvdata(pdev);

	int err;



	/* Turn off the GPIO block */

	if (plat->variant == U300_GPIO_COH901335)

		writel(0x00000000U, gpio->base + U300_335_CR);

	if (plat->variant == U300_GPIO_COH901571_3_BS335 ||

	    plat->variant == U300_GPIO_COH901571_3_BS365)

		writel(0x00000000U, gpio->base + U300_571_CR);

	writel(0x00000000U, gpio->base + U300_GPIO_CR);



	err = gpiochip_remove(&gpio->chip);

	if (err < 0) {