Merge "ARM: dts: msm: Add USB nodes for Holi"

	wdog {

		status = "disabled";

	};

	usb_emu_phy_0: usb_emu_phy@0x04f20000 {

		compatible = "qcom,usb-emu-phy";

		reg = <0x04f20000 0x9500>;

		qcom,emu-init-seq = <0xffff 0x4

				     0xfff0 0x4

				     0x100000 0x20

				     0x0 0x20

				     0x101f0 0x20

				     0x100000 0x3c

				     0x0 0x3c

				     0x10060 0x3c

				     0x0 0x4>;

	};

};

&usb0 {

	dwc3@4e00000 {

		usb-phy = <&usb_emu_phy_0>, <&usb_nop_phy>;

		maximum-speed = "high-speed";

		dr_mode = "peripheral";

	};

};

#include <dt-bindings/clock/qcom,gcc-holi.h>

&soc {

	/* Primary USB port related controller */

	usb0: ssusb@4e00000 {

		compatible = "qcom,dwc-usb3-msm";

		reg = <0x4e00000 0x100000>;

		reg-names = "core_base";

		#address-cells = <1>;

		#size-cells = <1>;

		ranges;

		interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,

			<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,

			<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;

		interrupt-names = "pwr_event_irq", "ss_phy_irq", "hs_phy_irq";

		clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,

			<&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,

			<&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,

			<&gcc GCC_USB3_PRIM_CLKREF_CLK>,

			<&gcc GCC_USB30_PRIM_SLEEP_CLK>,

			<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;

		clock-names = "core_clk", "iface_clk", "bus_aggr_clk",

				"xo", "sleep_clk", "utmi_clk";

		resets = <&gcc GCC_USB30_PRIM_BCR>;

		reset-names = "core_reset";

		USB3_GDSC-supply = <&gcc_usb30_prim_gdsc>;

		qcom,core-clk-rate = <133333333>;

		qcom,core-clk-rate-hs = <66666667>;

		qcom,num-gsi-evt-buffs = <0x3>;

		qcom,gsi-reg-offset =

			<0x0fc /* GSI_GENERAL_CFG */

			 0x110 /* GSI_DBL_ADDR_L */

			 0x120 /* GSI_DBL_ADDR_H */

			 0x130 /* GSI_RING_BASE_ADDR_L */

			 0x144 /* GSI_RING_BASE_ADDR_H */

			 0x1a4>; /* GSI_IF_STS */

		qcom,dwc-usb3-msm-tx-fifo-size = <21288>;

		dwc3@4e00000 {

			compatible = "snps,dwc3";

			reg = <0x4e00000 0xcd00>;

			interrupt-parent = <&intc>;

			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;

			tx-fifo-resize;

			linux,sysdev_is_parent;

			snps,disable-clk-gating;

			snps,dis_u2_susphy_quirk;

			snps,dis_enblslpm_quirk;

			snps,has-lpm-erratum;

			snps,hird-threshold = /bits/ 8 <0x10>;

			snps,usb3_lpm_capable;

			usb-core-id = <0>;

			maximum-speed = "super-speed";

			dr_mode = "otg";

		};

	};

	usb_nop_phy: usb_nop_phy {

		compatible = "usb-nop-xceiv";

	};

};

#include "holi-stub-regulator.dtsi"

#include "holi-gdsc.dtsi"

#include "holi-ion.dtsi"

#include "holi-usb.dtsi"

&pmk8350 {

	reg = <6 SPMI_USID>;