Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 0198b3bc authored by Mike Frysinger's avatar Mike Frysinger
Browse files

Blackfin: drop board resources for dead devices (pbx/ad9960) 



These hardware devices are dead and the drivers never cleaned up/merged,
so punt the useless board resource info.

Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent c4baebf2

arch/blackfin/mach-bf518/boards/ezbrd.c

+0 −27
Original line number Diff line number Diff line
@@ -199,15 +199,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { 
};

#endif



#if defined(CONFIG_PBX)

static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {

	.ctl_reg	= 0x4, /* send zero */

	.enable_dma	= 0,

	.bits_per_word	= 8,

	.cs_change_per_word = 1,

};

#endif



#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)

static struct bfin5xx_spi_chip spi_ad7877_chip_info = {

	.enable_dma = 0,
@@ -296,24 +287,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
		.mode = SPI_MODE_3,

	},

#endif

#if defined(CONFIG_PBX)

	{

		.modalias = "fxs-spi",

		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0,

		.chip_select = 8 - CONFIG_J11_JUMPER,

		.controller_data = &spi_si3xxx_chip_info,

		.mode = SPI_MODE_3,

	},

	{

		.modalias = "fxo-spi",

		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0,

		.chip_select = 8 - CONFIG_J19_JUMPER,

		.controller_data = &spi_si3xxx_chip_info,

		.mode = SPI_MODE_3,

	},

#endif

#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)

	{

		.modalias		= "ad7877",

arch/blackfin/mach-bf527/boards/cm_bf527.c

+0 −43
Original line number Diff line number Diff line
@@ -495,13 +495,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { 
};

#endif



#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)

static struct bfin5xx_spi_chip ad9960_spi_chip_info = {

	.enable_dma = 0,

	.bits_per_word = 16,

};

#endif



#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)

static struct bfin5xx_spi_chip  mmc_spi_chip_info = {

	.enable_dma = 0,
@@ -509,15 +502,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { 
};

#endif



#if defined(CONFIG_PBX)

static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {

	.ctl_reg	= 0x4, /* send zero */

	.enable_dma	= 0,

	.bits_per_word	= 8,

	.cs_change_per_word = 1,

};

#endif



#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)

static struct bfin5xx_spi_chip spi_ad7877_chip_info = {

	.enable_dma = 0,
@@ -591,15 +575,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
		.controller_data = &ad1836_spi_chip_info,

	},

#endif

#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)

	{

		.modalias = "ad9960-spi",

		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0,

		.chip_select = 1,

		.controller_data = &ad9960_spi_chip_info,

	},

#endif

#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)

	{

		.modalias = "mmc_spi",
@@ -610,24 +585,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
		.mode = SPI_MODE_3,

	},

#endif

#if defined(CONFIG_PBX)

	{

		.modalias = "fxs-spi",

		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0,

		.chip_select = 8 - CONFIG_J11_JUMPER,

		.controller_data = &spi_si3xxx_chip_info,

		.mode = SPI_MODE_3,

	},

	{

		.modalias = "fxo-spi",

		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0,

		.chip_select = 8 - CONFIG_J19_JUMPER,

		.controller_data = &spi_si3xxx_chip_info,

		.mode = SPI_MODE_3,

	},

#endif

#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)

	{

		.modalias		= "ad7877",

arch/blackfin/mach-bf527/boards/ezbrd.c

+0 −27
Original line number Diff line number Diff line
@@ -263,15 +263,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { 
};

#endif



#if defined(CONFIG_PBX)

static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {

	.ctl_reg	= 0x4, /* send zero */

	.enable_dma	= 0,

	.bits_per_word	= 8,

	.cs_change_per_word = 1,

};

#endif



#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)

static struct bfin5xx_spi_chip spi_ad7877_chip_info = {

	.enable_dma = 0,
@@ -376,24 +367,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
		.mode = SPI_MODE_3,

	},

#endif

#if defined(CONFIG_PBX)

	{

		.modalias = "fxs-spi",

		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0,

		.chip_select = 8 - CONFIG_J11_JUMPER,

		.controller_data = &spi_si3xxx_chip_info,

		.mode = SPI_MODE_3,

	},

	{

		.modalias = "fxo-spi",

		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0,

		.chip_select = 8 - CONFIG_J19_JUMPER,

		.controller_data = &spi_si3xxx_chip_info,

		.mode = SPI_MODE_3,

	},

#endif

#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)

	{

		.modalias		= "ad7877",

arch/blackfin/mach-bf527/boards/ezkit.c

+0 −43
Original line number Diff line number Diff line
@@ -512,13 +512,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { 
};

#endif



#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)

static struct bfin5xx_spi_chip ad9960_spi_chip_info = {

	.enable_dma = 0,

	.bits_per_word = 16,

};

#endif



#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)

static struct bfin5xx_spi_chip  mmc_spi_chip_info = {

	.enable_dma = 0,
@@ -526,15 +519,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { 
};

#endif



#if defined(CONFIG_PBX)

static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {

	.ctl_reg	= 0x4, /* send zero */

	.enable_dma	= 0,

	.bits_per_word	= 8,

	.cs_change_per_word = 1,

};

#endif



#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)

static struct bfin5xx_spi_chip spi_ad7877_chip_info = {

	.enable_dma = 0,
@@ -632,15 +616,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
		.controller_data = &ad1836_spi_chip_info,

	},

#endif

#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)

	{

		.modalias = "ad9960-spi",

		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0,

		.chip_select = 1,

		.controller_data = &ad9960_spi_chip_info,

	},

#endif

#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)

	{

		.modalias = "mmc_spi",
@@ -652,24 +627,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
	},

#endif



#if defined(CONFIG_PBX)

	{

		.modalias = "fxs-spi",

		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0,

		.chip_select = 8 - CONFIG_J11_JUMPER,

		.controller_data = &spi_si3xxx_chip_info,

		.mode = SPI_MODE_3,

	},

	{

		.modalias = "fxo-spi",

		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0,

		.chip_select = 8 - CONFIG_J19_JUMPER,

		.controller_data = &spi_si3xxx_chip_info,

		.mode = SPI_MODE_3,

	},

#endif

#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)

	{

		.modalias		= "ad7877",

arch/blackfin/mach-bf533/boards/H8606.c

+0 −26
Original line number Diff line number Diff line
@@ -201,15 +201,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { 
};

#endif



#if defined(CONFIG_PBX)

static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {

	.ctl_reg	= 0x1c04,

	.enable_dma	= 0,

	.bits_per_word	= 8,

	.cs_change_per_word = 1,

};

#endif



/* Notice: for blackfin, the speed_hz is the value of register

 * SPI_BAUD, not the real baudrate */

static struct spi_board_info bfin_spi_board_info[] __initdata = {
@@ -248,23 +239,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
	},

#endif



#if defined(CONFIG_PBX)

	{

		.modalias	 = "fxs-spi",

		.max_speed_hz	 = 4,

		.bus_num	 = 1,

		.chip_select	 = 3,

		.controller_data = &spi_si3xxx_chip_info,

	},



	{

		.modalias	 = "fxo-spi",

		.max_speed_hz	 = 4,

		.bus_num	 = 1,

		.chip_select	 = 2,

		.controller_data = &spi_si3xxx_chip_info,

	},

#endif

};



/* SPI (0) */