Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit feada609 authored by Peter Griffin's avatar Peter Griffin Committed by Patrice Chotard
Browse files

thermal: sti: Remove obsolete platforms from the DT doc. 



STiH415/6 SoC's are being removed from the kernel. This
patch removes the compatibles from the dt doc and also
updates the example to a supported platform.

Signed-off-by: default avatarPeter Griffin <peter.griffin@linaro.org>
Cc: <rui.zhang@intel.com>
Cc: <edubezval@gmail.com>
Cc: <robh+dt@kernel.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
parent eae865a0

Documentation/devicetree/bindings/thermal/st-thermal.txt

+9 −19
Original line number Diff line number Diff line
@@ -3,17 +3,8 @@ Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs. 
Required parameters:

-------------------



compatible : 	st,<SoC>-<module>-thermal; should be one of:

		  "st,stih415-sas-thermal",

		  "st,stih415-mpe-thermal",

		  "st,stih416-sas-thermal"

		  "st,stih416-mpe-thermal"

		  "st,stid127-thermal" or

		  "st,stih407-thermal"

		according to the SoC type (stih415, stih416, stid127, stih407)

		and module type (sas or mpe). On stid127 & stih407 there is only

		one die/module, so there is no module type in the compatible

		string.

compatible : 	Should be "st,stih407-thermal"



clock-names : 	Should be "thermal".

		  See: Documentation/devicetree/bindings/resource-names.txt

clocks : 	Phandle of the clock used by the thermal sensor.
@@ -25,18 +16,17 @@ Optional parameters: 
reg : 		For non-sysconf based sensors, this should be the physical base

		address and length of the sensor's registers.

interrupts :	Standard way to define interrupt number.

		Interrupt is mandatory to be defined when compatible is

		"stih416-mpe-thermal".

		  NB: For thermal sensor's for which no interrupt has been

		  defined, a polling delay of 1000ms will be used to read the

		  temperature from device.



Example:



	temp1@fdfe8000 {

		compatible	= "st,stih416-mpe-thermal";

		reg		= <0xfdfe8000 0x10>;

	temp0@91a0000 {

		compatible = "st,stih407-thermal";

		reg = <0x91a0000 0x28>;

		clock-names = "thermal";

		clocks		= <&clk_m_mpethsens>;

		interrupts	= <GIC_SPI 23 IRQ_TYPE_NONE>;

		clocks = <&CLK_SYSIN>;

		interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;

		st,passive_cooling_temp = <110>;

	};