Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit fb2915ac authored by Shilpa Suresh's avatar Shilpa Suresh
Browse files

ARM: dts: msm: Update pm8916 DTSI for 4.19 kernel 

Update the pm8916 DTSI file with all the relevant changes
required to support the SPF targets on 4.19 kernel.

Change-Id: Iff60adc38368d9c0a2385ec4a1d3dd5846245030
parent 5cfdcce2

qcom/pm8916.dtsi

+96 −304
Original line number Diff line number Diff line 
#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/spmi/spmi.h>



&spmi_bus {



	qcom,pm8916@0 {

		reg = <0x0>;

		#address-cells = <1>;

		#size-cells = <1>;

	pm8916_0: pm8916@0 {

		compatible = "qcom,pm8916", "qcom,spmi-pmic";

		reg = <0 SPMI_USID>;

		#address-cells = <2>;

		#size-cells = <0>;



		pm8916_revid: qcom,revid@100 {

			compatible = "qcom,qpnp-revid";
@@ -13,8 +17,8 @@ 
		pm8916_pon: qcom,power-on@800 {

			compatible = "qcom,qpnp-power-on";

			reg = <0x800 0x100>;

			interrupts = <0x0 0x8 0x0>,

				     <0x0 0x8 0x1>;

			interrupts = <0x0 0x8 0x0 IRQ_TYPE_NONE>,

				     <0x0 0x8 0x1 IRQ_TYPE_NONE>;

			interrupt-names = "kpdpwr", "resin";

			qcom,pon-dbc-delay = <15625>;

			qcom,system-reset;
@@ -38,77 +42,35 @@ 
			};

		};



		pm8916_mpps: mpps {

		pm8916_gpios: pinctrl@c000 {

			compatible = "qcom,pm8916-gpio";

			reg = <0xc000 0x400>;

			gpio-controller;

			#gpio-cells = <2>;

			#address-cells = <1>;

			#size-cells = <1>;

			label = "pm8916-mpp";



			mpp@a000 {

				reg = <0xa000 0x100>;

				qcom,pin-num = <1>;

			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,

				     <0 0xc1 0 IRQ_TYPE_NONE>,

				     <0 0xc2 0 IRQ_TYPE_NONE>,

				     <0 0xc3 0 IRQ_TYPE_NONE>;

			interrupt-names = "pm8916_gpio1", "pm8916_gpio2",

					  "pm8916_gpio3", "pm8916_gpio4";

		};



			mpp@a100 {

				reg = <0xa100 0x100>;

				qcom,pin-num = <2>;

			};



			mpp@a200 {

				reg = <0xa200 0x100>;

				qcom,pin-num = <3>;

			};



			mpp@a300 {

				reg = <0xa300 0x100>;

				qcom,pin-num = <4>;

			};

		};



		pm8916_gpios: gpios {

		pm8916_mpps: mpps@a000 {

			compatible = "qcom,pm8916-mpp";

			reg = <0xa000 0x400>;

			gpio-controller;

			#gpio-cells = <2>;

			#address-cells = <1>;

			#size-cells = <1>;

			label = "pm8916-gpio";



			gpio@c000 {

				reg = <0xc000 0x100>;

				qcom,pin-num = <1>;

			};



			gpio@c100 {

				reg = <0xc100 0x100>;

				qcom,pin-num = <2>;

			};



			gpio@c200 {

				reg = <0xc200 0x100>;

				qcom,pin-num = <3>;

			};



			gpio@c300 {

				reg = <0xc300 0x100>;

				qcom,pin-num = <4>;

			};

			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,

				     <0 0xa1 0 IRQ_TYPE_NONE>,

				     <0 0xa2 0 IRQ_TYPE_NONE>,

				     <0 0xa3 0 IRQ_TYPE_NONE>;

			interrupt-names = "pm8916_mpp1", "pm8916_mpp2",

					  "pm8916_mpp3", "pm8916_mpp4";

		};



		pm8916_rtc: qcom,pm8916_rtc {

			compatible = "qcom,qpnp-rtc";

			#address-cells = <1>;

			#size-cells = <1>;

			qcom,qpnp-rtc-write = <0>;

			qcom,qpnp-rtc-alarm-pwrup = <0>;



			qcom,pm8916_rtc_rw@6000 {

				reg = <0x6000 0x100>;

			};



			qcom,pm8916_rtc_alarm@6100 {

				reg = <0x6100 0x100>;

				interrupts = <0x0 0x61 0x1>;

			};

			compatible = "qcom,pm8916-rtc";

			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;

		};



		pm8916_vadc: vadc@3100 {
@@ -116,12 +78,13 @@ 
			reg = <0x3100 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0x0 0x31 0x0>;

			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "eoc-int-en-set";

			qcom,adc-bit-resolution = <15>;

			qcom,adc-vdd-reference = <1800>;

			qcom,vadc-poll-eoc;

			qcom,pmic-revid = <&pm8916_revid>;

			#thermal-sensor-cells = <1>;



			chan@8 {

				label = "die_temp";
@@ -160,20 +123,22 @@ 
		pm8916_tz: qcom,temp-alarm@2400 {

			compatible = "qcom,spmi-temp-alarm";

			reg = <0x2400 0x100>;

			interrupts = <0x0 0x24 0x0>;

			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;

			label = "pm8916_tz";

			qcom,channel-num = <8>;

			qcom,threshold-set = <0>;

			qcom,temp_alarm-vadc = <&pm8916_vadc>;

			#thermal-sensor-cells = <0>;

		};



		pm8916_adc_tm: vadc@3400 {

			compatible = "qcom,adc-tm-rev2";

			reg = <0x3400 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts =	<0x0 0x34 0x0>,

					<0x0 0x34 0x3>,

					<0x0 0x34 0x4>;

			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>,

				     <0x0 0x34 0x3 IRQ_TYPE_EDGE_RISING>,

				     <0x0 0x34 0x4 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "eoc-int-en-set",

					  "high-thr-en-set",

					  "low-thr-en-set";
@@ -184,8 +149,10 @@ 
		};



		pm8916_chg: qcom,charger {

			compatible = "qcom,qpnp-linear-charger";

			#address-cells = <1>;

			#size-cells = <1>;

			#cooling-cells = <2>;



			qcom,vddmax-mv = <4200>;

			qcom,vddsafe-mv = <4200>;
@@ -201,6 +168,7 @@ 
			qcom,batt-hot-percentage = <25>;

			qcom,batt-cold-percentage = <80>;

			qcom,tchg-mins = <232>;

			qcom,resume-soc = <99>;

			qcom,chg-vadc = <&pm8916_vadc>;

			qcom,chg-adc_tm = <&pm8916_adc_tm>;
@@ -208,10 +176,11 @@ 


			qcom,chgr@1000 {

				reg = <0x1000 0x100>;

				interrupts =	<0x0 0x10 0x7>,

						<0x0 0x10 0x6>,

						<0x0 0x10 0x5>,

						<0x0 0x10 0x0>;

				interrupts =

					<0x0 0x10 0x7 IRQ_TYPE_EDGE_RISING>,

					<0x0 0x10 0x6 IRQ_TYPE_EDGE_RISING>,

					<0x0 0x10 0x5 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x10 0x0 IRQ_TYPE_EDGE_FALLING>;

				interrupt-names = "chg-done",

						  "chg-failed",

						  "fast-chg-on",
@@ -220,17 +189,18 @@ 


			qcom,bat-if@1200 {

				reg = <0x1200 0x100>;

				interrupts =	<0x0 0x12 0x1>,

						<0x0 0x12 0x0>;

				interrupts = <0x0 0x12 0x1 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x12 0x0 IRQ_TYPE_EDGE_BOTH>;

				interrupt-names = "bat-temp-ok",

						  "batt-pres";

			};



			qcom,usb-chgpth@1300 {

				reg = <0x1300 0x100>;

				interrupts =	<0 0x13 0x4>,

						<0 0x13 0x2>,

						<0 0x13 0x1>;

				interrupts =

					<0 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,

					<0 0x13 0x2 IRQ_TYPE_EDGE_RISING>,

					<0 0x13 0x1 IRQ_TYPE_EDGE_BOTH>;

				interrupt-names = "usb-over-temp",

						  "chg-gone",

						  "usbin-valid";
@@ -242,6 +212,7 @@ 
		};



		pm8916_bms: qcom,vmbms {

			compatible = "qcom,qpnp-vm-bms";

			#address-cells = <1>;

			#size-cells = <1>;

			status = "disabled";
@@ -266,7 +237,6 @@ 
			qcom,force-s3-on-suspend;

			qcom,force-s2-in-charging;

			qcom,report-charger-eoc;

			qcom,resume-soc = <99>;



			qcom,batt-pres-status@1208 {

				reg = <0x1208 0x1>;
@@ -278,12 +248,12 @@ 


			qcom,vm-bms@4000 {

				reg = <0x4000 0x100>;

				interrupts =	<0x0 0x40 0x0>,

						<0x0 0x40 0x1>,

						<0x0 0x40 0x2>,

						<0x0 0x40 0x3>,

						<0x0 0x40 0x4>,

						<0x0 0x40 0x5>;

				interrupts = <0x0 0x40 0x0 IRQ_TYPE_NONE>,

					     <0x0 0x40 0x1 IRQ_TYPE_NONE>,

					     <0x0 0x40 0x2 IRQ_TYPE_NONE>,

					     <0x0 0x40 0x3 IRQ_TYPE_NONE>,

					     <0x0 0x40 0x4 IRQ_TYPE_NONE>,

					     <0x0 0x40 0x5 IRQ_TYPE_NONE>;



				interrupt-names = "leave_cv",

						  "enter_cv",
@@ -295,192 +265,24 @@ 
		};



		pm8916_leds: qcom,leds@a100 {

			compatible = "qcom,leds-qpnp";

			reg = <0xa100 0x100>;

			label = "mpp";

		};

	};



	qcom,pm8916@1 {

		reg = <0x1>;

		#address-cells = <1>;

		#size-cells = <1>;



		regulator@1400 {

			regulator-name = "8916_s1";

			#address-cells = <1>;

			#size-cells = <1>;

			reg = <0x1700 0x300>;

			status = "disabled";



			qcom,ctl@1700 {

				reg = <0x1700 0x100>;

			};



			qcom,ps@1800 {

				reg = <0x1800 0x100>;

			};



			qcom,freq@1900 {

				reg = <0x1900 0x100>;

			};

		};



		regulator@1a00 {

			regulator-name = "8916_s3";

			#address-cells = <1>;

			#size-cells = <1>;

			reg = <0x1a00 0x300>;

			status = "disabled";



			qcom,ctl@1a00 {

				reg = <0x1a00 0x100>;

			};



			qcom,ps@1b00 {

				reg = <0x1b00 0x100>;

			};



			qcom,freq@1c00 {

				reg = <0x1c00 0x100>;

			};

		};



		regulator@1d00 {

			regulator-name = "8916_s4";

			#address-cells = <1>;

			#size-cells = <1>;

			reg = <0x1d00 0x300>;

			status = "disabled";



			qcom,ctl@1d00 {

				reg = <0x1d00 0x100>;

			};



			qcom,ps@1e00 {

				reg = <0x1e00 0x100>;

			};



			qcom,freq@1f00 {

				reg = <0x1f00 0x100>;

			};



		};



		regulator@4000 {

			regulator-name = "8916_l1";

			reg = <0x4000 0x100>;

			status = "disabled";

		};



		regulator@4100 {

			regulator-name = "8916_l2";

			reg = <0x4100 0x100>;

			status = "disabled";

		};



		regulator@4200 {

			regulator-name = "8916_l3";

			reg = <0x4200 0x100>;

			status = "disabled";

		};



		regulator@4300 {

			regulator-name = "8916_l4";

			reg = <0x4300 0x100>;

			status = "disabled";

		};



		regulator@4400 {

			regulator-name = "8916_l5";

			reg = <0x4400 0x100>;

			status = "disabled";

		};



		regulator@4500 {

			regulator-name = "8916_l6";

			reg = <0x4500 0x100>;

			status = "disabled";

		};



		regulator@4600 {

			regulator-name = "8916_l7";

			reg = <0x4600 0x100>;

			status = "disabled";

		};



		regulator@4700 {

			regulator-name = "8916_l8";

			reg = <0x4700 0x100>;

			status = "disabled";

		};



		regulator@4800 {

			regulator-name = "8916_l9";

			reg = <0x4800 0x100>;

			status = "disabled";

		};



		regulator@4900 {

			regulator-name = "8916_l10";

			reg = <0x4900 0x100>;

			status = "disabled";

		};



		regulator@4a00 {

			regulator-name = "8916_l11";

			reg = <0x4a00 0x100>;

			status = "disabled";

		};



		regulator@4b00 {

			regulator-name = "8916_l12";

			reg = <0x4b00 0x100>;

			status = "disabled";

		};



		regulator@4c00 {

			regulator-name = "8916_l13";

			reg = <0x4c00 0x100>;

			status = "disabled";

		};



		regulator@4d00 {

			regulator-name = "8916_l14";

			reg = <0x4d00 0x100>;

			status = "disabled";

		};



		regulator@4e00 {

			regulator-name = "8916_l15";

			reg = <0x4e00 0x100>;

			status = "disabled";

		};



		regulator@4f00 {

			regulator-name = "8916_l16";

			reg = <0x4f00 0x100>;

			status = "disabled";

		};



		regulator@5000 {

			regulator-name = "8916_l17";

			reg = <0x5000 0x100>;

			status = "disabled";

		};



		regulator@5100 {

			regulator-name = "8916_l18";

			reg = <0x5100 0x100>;

			status = "disabled";

		};

	pm8916_1: pm8916@1 {

		compatible = "qcom,pm8916", "qcom,spmi-pmic";

		reg = <1 SPMI_USID>;

		#address-cells = <2>;

		#size-cells = <0>;



		pm8916_pwm: qcom,pwms@bc00 {

			compatible = "qcom,pwm-lpg";

			reg = <0xbc00 0x100>;

			reg-names = "qpnp-lpg-channel-base";

			qcom,channel-id = <0>;

			qcom,supported-sizes = <6>, <9>;

			reg-names = "lpg-base";

			#pwm-cells = <2>;

			qcom,num-lpg-channels = <1>;

		};



		pm8916_vib: qcom,vibrator@c000 {
@@ -491,16 +293,17 @@ 
		};



		pm8916_tombak_dig: msm8x16_wcd_codec@f000 {

			compatible = "qcom,msm8x16_wcd_codec";

			reg = <0xf000 0x100>;

			interrupt-parent = <&spmi_bus>;

			interrupts = <0x1 0xf0 0x0>,

				     <0x1 0xf0 0x1>,

				     <0x1 0xf0 0x2>,

				     <0x1 0xf0 0x3>,

				     <0x1 0xf0 0x4>,

				     <0x1 0xf0 0x5>,

				     <0x1 0xf0 0x6>,

				     <0x1 0xf0 0x7>;

			interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,

				     <0x1 0xf0 0x1 IRQ_TYPE_NONE>,

				     <0x1 0xf0 0x2 IRQ_TYPE_NONE>,

				     <0x1 0xf0 0x3 IRQ_TYPE_NONE>,

				     <0x1 0xf0 0x4 IRQ_TYPE_NONE>,

				     <0x1 0xf0 0x5 IRQ_TYPE_NONE>,

				     <0x1 0xf0 0x6 IRQ_TYPE_NONE>,

				     <0x1 0xf0 0x7 IRQ_TYPE_NONE>;

			interrupt-names = "spk_cnp_int",

					  "spk_clip_int",

					  "spk_ocp_int",
@@ -538,17 +341,19 @@ 
						   "cdc-vdda-cp";



			qcom,cdc-on-demand-supplies = "cdc-vdd-mic-bias";

			qcom,subsys-name = "modem";

		};



		pm8916_tombak_analog: msm8x16_wcd_codec@f100 {

			compatible = "qcom,msm8x16_wcd_codec";

			reg = <0xf100 0x100>;

			interrupt-parent = <&spmi_bus>;

			interrupts = <0x1 0xf1 0x0>,

				     <0x1 0xf1 0x1>,

				     <0x1 0xf1 0x2>,

				     <0x1 0xf1 0x3>,

				     <0x1 0xf1 0x4>,

				     <0x1 0xf1 0x5>;

			interrupts = <0x1 0xf1 0x0 IRQ_TYPE_NONE>,

				     <0x1 0xf1 0x1 IRQ_TYPE_NONE>,

				     <0x1 0xf1 0x2 IRQ_TYPE_NONE>,

				     <0x1 0xf1 0x3 IRQ_TYPE_NONE>,

				     <0x1 0xf1 0x4 IRQ_TYPE_NONE>,

				     <0x1 0xf1 0x5 IRQ_TYPE_NONE>;

			interrupt-names = "ear_ocp_int",

					  "hphr_ocp_int",

					  "hphl_ocp_det",
@@ -556,18 +361,5 @@ 
					  "hphr_cnp_int",

					  "hphl_cnp_int";

		};



		pm8916_bcm: qpnp-buck-current-monitor@1800 {

			reg = <0x1800 0x100>;

			interrupts = <1 0x18 0>, <1 0x18 1>;

			interrupt-names = "iwarning", "icritical";

			qcom,enable-current-monitor;

			qcom,icrit-init-threshold-pc = <90>;

			qcom,iwarn-init-threshold-pc = <70>;

			qcom,icrit-polling-delay-msec = <1000>;

			qcom,iwarn-polling-delay-msec = <2000>;



			status = "disabled";

		};

	};

};