Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit f6b2a045 authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Mark Brown
Browse files

ASoC: pxa: mioa701_wm9713: Convert to table based DAPM setup



Use table based setup to register the DAPM widgets and routes. This on one hand
makes the code a bit cleaner and on the other hand the board level DAPM elements
get registered in the card's DAPM context rather than in the CODEC's DAPM
context.

Also remove the snd_soc_dapm_enable_pin() calls, since pins are enabled by
default and there are no matching snd_soc_dapm_disable_pin() calls.

Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 1bdd301f
Loading
Loading
Loading
Loading
+5 −14
Original line number Diff line number Diff line
@@ -127,16 +127,8 @@ static const struct snd_soc_dapm_route audio_map[] = {
static int mioa701_wm9713_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_codec *codec = rtd->codec;
	struct snd_soc_dapm_context *dapm = &codec->dapm;
	unsigned short reg;

	/* Add mioa701 specific widgets */
	snd_soc_dapm_new_controls(dapm, mioa701_dapm_widgets,
				  ARRAY_SIZE(mioa701_dapm_widgets));

	/* Set up mioa701 specific audio path audio_mapnects */
	snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));

	/* Prepare GPIO8 for rear speaker amplifier */
	reg = codec->driver->read(codec, AC97_GPIO_CFG);
	codec->driver->write(codec, AC97_GPIO_CFG, reg | 0x0100);
@@ -145,12 +137,6 @@ static int mioa701_wm9713_init(struct snd_soc_pcm_runtime *rtd)
	reg = codec->driver->read(codec, AC97_3D_CONTROL);
	codec->driver->write(codec, AC97_3D_CONTROL, reg | 0xc000);

	snd_soc_dapm_enable_pin(dapm, "Front Speaker");
	snd_soc_dapm_enable_pin(dapm, "Rear Speaker");
	snd_soc_dapm_enable_pin(dapm, "Front Mic");
	snd_soc_dapm_enable_pin(dapm, "GSM Line In");
	snd_soc_dapm_enable_pin(dapm, "GSM Line Out");

	return 0;
}

@@ -183,6 +169,11 @@ static struct snd_soc_card mioa701 = {
	.owner = THIS_MODULE,
	.dai_link = mioa701_dai,
	.num_links = ARRAY_SIZE(mioa701_dai),

	.dapm_widgets = mioa701_dapm_widgets,
	.num_dapm_widgets = ARRAY_SIZE(mioa701_dapm_widgets),
	.dapm_routes = audio_map,
	.num_dapm_routes = ARRAY_SIZE(audio_map),
};

static int mioa701_wm9713_probe(struct platform_device *pdev)