ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. (f3af1c73) · Commits · e / devices / android_kernel_fairphone_FP4

arch/arm/boot/dts/kirkwood-goflexnet.dts

+50 −0

Original line number	Diff line number	Diff line
		@@ -45,5 +45,55 @@
		reg = <0x02500000 0xd800000>;
		};
		};
		sata@80000 {
		status = "okay";
		nr-ports = <2>;
		};

		};
		gpio-leds {
		compatible = "gpio-leds";

		health {
		label = "status:green:health";
		gpios = <&gpio1 14 1>;
		linux,default-trigger = "default-on";
		};
		fault {
		label = "status:orange:fault";
		gpios = <&gpio1 15 1>;
		};
		left0 {
		label = "status:white:left0";
		gpios = <&gpio1 10 0>;
		};
		left1 {
		label = "status:white:left1";
		gpios = <&gpio1 11 0>;
		};
		left2 {
		label = "status:white:left2";
		gpios = <&gpio1 12 0>;
		};
		left3 {
		label = "status:white:left3";
		gpios = <&gpio1 13 0>;
		};
		right0 {
		label = "status:white:right0";
		gpios = <&gpio1 6 0>;
		};
		right1 {
		label = "status:white:right1";
		gpios = <&gpio1 7 0>;
		};
		right2 {
		label = "status:white:right2";
		gpios = <&gpio1 8 0>;
		};
		right3 {
		label = "status:white:right3";
		gpios = <&gpio1 9 0>;
		};
		};
		};

arch/arm/mach-kirkwood/board-goflexnet.c

+0 −84

Original line number	Diff line number	Diff line
		@@ -27,7 +27,6 @@
		#include <linux/of_irq.h>
		#include <linux/of_platform.h>
		#include <linux/gpio.h>
		#include <linux/leds.h>
		#include <asm/mach-types.h>
		#include <asm/mach/arch.h>
		#include <asm/mach/map.h>
		@@ -41,86 +40,6 @@ static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
		.phy_addr = MV643XX_ETH_PHY_ADDR(0),
		};

		static struct mv_sata_platform_data goflexnet_sata_data = {
		.n_ports = 2,
		};

		static struct gpio_led goflexnet_led_pins[] = {
		{
		.name = "status:green:health",
		.default_trigger = "default-on",
		.gpio = 46,
		.active_low = 1,
		},
		{
		.name = "status:orange:fault",
		.default_trigger = "none",
		.gpio = 47,
		.active_low = 1,
		},
		{
		.name = "status:white:left0",
		.default_trigger = "none",
		.gpio = 42,
		.active_low = 0,
		},
		{
		.name = "status:white:left1",
		.default_trigger = "none",
		.gpio = 43,
		.active_low = 0,
		},
		{
		.name = "status:white:left2",
		.default_trigger = "none",
		.gpio = 44,
		.active_low = 0,
		},
		{
		.name = "status:white:left3",
		.default_trigger = "none",
		.gpio = 45,
		.active_low = 0,
		},
		{
		.name = "status:white:right0",
		.default_trigger = "none",
		.gpio = 38,
		.active_low = 0,
		},
		{
		.name = "status:white:right1",
		.default_trigger = "none",
		.gpio = 39,
		.active_low = 0,
		},
		{
		.name = "status:white:right2",
		.default_trigger = "none",
		.gpio = 40,
		.active_low = 0,
		},
		{
		.name = "status:white:right3",
		.default_trigger = "none",
		.gpio = 41,
		.active_low = 0,
		},
		};

		static struct gpio_led_platform_data goflexnet_led_data = {
		.leds = goflexnet_led_pins,
		.num_leds = ARRAY_SIZE(goflexnet_led_pins),
		};

		static struct platform_device goflexnet_leds = {
		.name = "leds-gpio",
		.id = -1,
		.dev = {
		.platform_data = &goflexnet_led_data,
		}
		};

		static unsigned int goflexnet_mpp_config[] __initdata = {
		MPP29_GPIO, /* USB Power Enable */
		MPP47_GPIO, /* LED Orange */
		@@ -149,7 +68,4 @@ void __init goflexnet_init(void)
		kirkwood_ehci_init();

		kirkwood_ge00_init(&goflexnet_ge00_data);
		kirkwood_sata_init(&goflexnet_sata_data);

		platform_device_register(&goflexnet_leds);
		}