Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit f16dab98 authored by Roy Zang's avatar Roy Zang Committed by Kumar Gala
Browse files

[POWERPC] Add basic PCI/PCI Express support for 8544DS board 



Add basic support for the PCIe PHB and enable the ULI bridge.

Signed-off-by: default avatarYork Sun <yorksun@freescale.com>
Signed-off-by: default avatarRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 2e56ff20

arch/powerpc/boot/dts/mpc8544ds.dts

+211 −0
Original line number Diff line number Diff line
@@ -137,6 +137,217 @@ 
			interrupt-parent = <&mpic>;

		};



		pci@8000 {

			compatible = "fsl,mpc8540-pci";

			device_type = "pci";

			interrupt-map-mask = <f800 0 0 7>;

			interrupt-map = <



				/* IDSEL 0x11 J17 Slot 1 */

				8800 0 0 1 &mpic 2 1

				8800 0 0 2 &mpic 3 1

				8800 0 0 3 &mpic 4 1

				8800 0 0 4 &mpic 1 1



				/* IDSEL 0x12 J16 Slot 2 */



				9000 0 0 1 &mpic 3 1

				9000 0 0 2 &mpic 4 1

				9000 0 0 3 &mpic 2 1

				9000 0 0 4 &mpic 1 1>;



			interrupt-parent = <&mpic>;

			interrupts = <18 2>;

			bus-range = <0 ff>;

			ranges = <02000000 0 80000000 80000000 0 10000000

				  01000000 0 00000000 e2000000 0 00800000>;

			clock-frequency = <3f940aa>;

			#interrupt-cells = <1>;

			#size-cells = <2>;

			#address-cells = <3>;

			reg = <8000 1000>;

		};



		pcie@9000 {

			compatible = "fsl,mpc8548-pcie";

			device_type = "pci";

			#interrupt-cells = <1>;

			#size-cells = <2>;

			#address-cells = <3>;

			reg = <9000 1000>;

			bus-range = <0 ff>;

			ranges = <02000000 0 90000000 90000000 0 10000000

				  01000000 0 00000000 e3000000 0 00800000>;

			clock-frequency = <1fca055>;

			interrupt-parent = <&mpic>;

			interrupts = <1a 2>;

			interrupt-map-mask = <f800 0 0 7>;

			interrupt-map = <

				/* IDSEL 0x0 */

				0000 0 0 1 &mpic 4 1

				0000 0 0 2 &mpic 5 1

				0000 0 0 3 &mpic 6 1

				0000 0 0 4 &mpic 7 1

				>;

		};



		pcie@a000 {

			compatible = "fsl,mpc8548-pcie";

			device_type = "pci";

			#interrupt-cells = <1>;

			#size-cells = <2>;

			#address-cells = <3>;

			reg = <a000 1000>;

			bus-range = <0 ff>;

			ranges = <02000000 0 a0000000 a0000000 0 10000000

				  01000000 0 00000000 e2800000 0 00800000>;

			clock-frequency = <1fca055>;

			interrupt-parent = <&mpic>;

			interrupts = <19 2>;

			interrupt-map-mask = <f800 0 0 7>;

			interrupt-map = <

				/* IDSEL 0x0 */

				0000 0 0 1 &mpic 0 1

				0000 0 0 2 &mpic 1 1

				0000 0 0 3 &mpic 2 1

				0000 0 0 4 &mpic 3 1

				>;

		};



		pcie@b000 {

			compatible = "fsl,mpc8548-pcie";

			device_type = "pci";

			#interrupt-cells = <1>;

			#size-cells = <2>;

			#address-cells = <3>;

			reg = <b000 1000>;

			bus-range = <0 ff>;

			ranges = <02000000 0 b0000000 b0000000 0 10000000

				  01000000 0 00000000 e3800000 0 00800000>;

			clock-frequency = <1fca055>;

			interrupt-parent = <&mpic>;

			interrupts = <1b 2>;

			interrupt-map-mask = <f800 0 0 7>;

			interrupt-map = <



				// IDSEL 0x1a

				d000 0 0 1 &i8259 6 2

				d000 0 0 2 &i8259 3 2

				d000 0 0 3 &i8259 4 2

				d000 0 0 4 &i8259 5 2



				// IDSEL 0x1b

				d800 0 0 1 &i8259 5 2

				d800 0 0 2 &i8259 0 0

				d800 0 0 3 &i8259 0 0

				d800 0 0 4 &i8259 0 0



				// IDSEL 0x1c  USB

				e000 0 0 1 &i8259 9 2

				e000 0 0 2 &i8259 a 2

				e000 0 0 3 &i8259 c 2

				e000 0 0 4 &i8259 7 2



				// IDSEL 0x1d  Audio

				e800 0 0 1 &i8259 9 2

				e800 0 0 2 &i8259 a 2

				e800 0 0 3 &i8259 b 2

				e800 0 0 4 &i8259 0 0



				// IDSEL 0x1e Legacy

				f000 0 0 1 &i8259 c 2

				f000 0 0 2 &i8259 0 0

				f000 0 0 3 &i8259 0 0

				f000 0 0 4 &i8259 0 0



				// IDSEL 0x1f IDE/SATA

				f800 0 0 1 &i8259 6 2

				f800 0 0 2 &i8259 0 0

				f800 0 0 3 &i8259 0 0

				f800 0 0 4 &i8259 0 0

			>;

			uli1575@0 {

				reg = <0 0 0 0 0>;

				#size-cells = <2>;

				#address-cells = <3>;

				ranges = <02000000 0 b0000000

					  02000000 0 b0000000

					  0 10000000

					  01000000 0 00000000

					  01000000 0 00000000

					  0 00080000>;



				pci_bridge@0 {

					reg = <0 0 0 0 0>;

					#size-cells = <2>;

					#address-cells = <3>;

					ranges = <02000000 0 b0000000

						  02000000 0 b0000000

						  0 20000000

						  01000000 0 00000000

						  01000000 0 00000000

						  0 00100000>;



					isa@1e {

						device_type = "isa";

						#interrupt-cells = <2>;

						#size-cells = <1>;

						#address-cells = <2>;

						reg = <f000 0 0 0 0>;

						ranges = <1 0 01000000 0 0

							  00001000>;

						interrupt-parent = <&i8259>;



						i8259: interrupt-controller@20 {

							reg = <1 20 2

							       1 a0 2

							       1 4d0 2>;

							clock-frequency = <0>;

							interrupt-controller;

							device_type = "interrupt-controller";

							#address-cells = <0>;

							#interrupt-cells = <2>;

							built-in;

							compatible = "chrp,iic";

							interrupts = <9 2>;

							interrupt-parent =

								<&mpic>;

						};



						i8042@60 {

							#size-cells = <0>;

							#address-cells = <1>;

							reg = <1 60 1 1 64 1>;

							interrupts = <1 3 c 3>;

							interrupt-parent =

								<&i8259>;



							keyboard@0 {

								reg = <0>;

								compatible = "pnpPNP,303";

							};



							mouse@1 {

								reg = <1>;

								compatible = "pnpPNP,f03";

							};

						};



						rtc@70 {

							compatible =

								"pnpPNP,b00";

							reg = <1 70 2>;

						};



						gpio@400 {

							reg = <1 400 80>;

						};

					};

				};

			};



		};



		mpic: pic@40000 {

			clock-frequency = <0>;

			interrupt-controller;

arch/powerpc/configs/mpc8544_ds_defconfig

+208 −125
Original line number Diff line number Diff line 
#

# Automatically generated make config: don't edit

# Linux kernel version: 2.6.22-rc7

# Sun Jul  1 23:56:58 2007

# Linux kernel version: 2.6.22

# Fri Jul 20 14:09:13 2007

#

# CONFIG_PPC64 is not set



#

# Processor support

#

# CONFIG_6xx is not set

CONFIG_PPC_85xx=y

# CONFIG_PPC_8xx is not set

# CONFIG_40x is not set

# CONFIG_44x is not set

# CONFIG_E200 is not set

CONFIG_85xx=y

CONFIG_E500=y

CONFIG_BOOKE=y

CONFIG_FSL_BOOKE=y

# CONFIG_PHYS_64BIT is not set

# CONFIG_SPE is not set

# CONFIG_PPC_MM_SLICES is not set

CONFIG_PPC32=y

CONFIG_PPC_MERGE=y

CONFIG_MMU=y
@@ -14,6 +31,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y 
CONFIG_GENERIC_HWEIGHT=y

CONFIG_GENERIC_CALIBRATE_DELAY=y

CONFIG_GENERIC_FIND_NEXT_BIT=y

# CONFIG_ARCH_NO_VIRT_TO_BUS is not set

CONFIG_PPC=y

CONFIG_EARLY_PRINTK=y

CONFIG_GENERIC_NVRAM=y
@@ -25,28 +43,8 @@ CONFIG_PPC_UDBG_16550=y 
CONFIG_AUDIT_ARCH=y

CONFIG_GENERIC_BUG=y

CONFIG_DEFAULT_UIMAGE=y



#

# Processor support

#

# CONFIG_CLASSIC32 is not set

# CONFIG_PPC_82xx is not set

# CONFIG_PPC_83xx is not set

CONFIG_PPC_85xx=y

# CONFIG_PPC_86xx is not set

# CONFIG_PPC_8xx is not set

# CONFIG_40x is not set

# CONFIG_44x is not set

# CONFIG_E200 is not set

CONFIG_85xx=y

CONFIG_E500=y

# CONFIG_PPC_DCR_NATIVE is not set

# CONFIG_PPC_DCR_MMIO is not set

CONFIG_BOOKE=y

CONFIG_FSL_BOOKE=y

# CONFIG_PHYS_64BIT is not set

# CONFIG_SPE is not set

# CONFIG_PPC_MM_SLICES is not set

CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"



#
@@ -63,13 +61,12 @@ CONFIG_LOCALVERSION="" 
CONFIG_LOCALVERSION_AUTO=y

CONFIG_SWAP=y

CONFIG_SYSVIPC=y

CONFIG_IPC_NS=y

CONFIG_SYSVIPC_SYSCTL=y

CONFIG_POSIX_MQUEUE=y

CONFIG_BSD_PROCESS_ACCT=y

# CONFIG_BSD_PROCESS_ACCT_V3 is not set

# CONFIG_TASKSTATS is not set

# CONFIG_UTS_NS is not set

# CONFIG_USER_NS is not set

CONFIG_AUDIT=y

# CONFIG_AUDITSYSCALL is not set

CONFIG_IKCONFIG=y
@@ -86,7 +83,7 @@ CONFIG_SYSCTL_SYSCALL=y 
CONFIG_KALLSYMS=y

CONFIG_KALLSYMS_ALL=y

# CONFIG_KALLSYMS_EXTRA_PASS is not set

# CONFIG_HOTPLUG is not set

CONFIG_HOTPLUG=y

CONFIG_PRINTK=y

CONFIG_BUG=y

CONFIG_ELF_CORE=y
@@ -105,24 +102,17 @@ CONFIG_SLAB=y 
CONFIG_RT_MUTEXES=y

# CONFIG_TINY_SHMEM is not set

CONFIG_BASE_SMALL=0



#

# Loadable module support

#

CONFIG_MODULES=y

CONFIG_MODULE_UNLOAD=y

CONFIG_MODULE_FORCE_UNLOAD=y

CONFIG_MODVERSIONS=y

# CONFIG_MODULE_SRCVERSION_ALL is not set

CONFIG_KMOD=y



#

# Block layer

#

CONFIG_BLOCK=y

CONFIG_LBD=y

# CONFIG_BLK_DEV_IO_TRACE is not set

# CONFIG_LSF is not set

# CONFIG_BLK_DEV_BSG is not set



#

# IO Schedulers
@@ -153,7 +143,7 @@ CONFIG_MPC8544_DS=y 
CONFIG_MPC85xx=y

CONFIG_MPIC=y

# CONFIG_MPIC_WEIRD is not set

# CONFIG_PPC_I8259 is not set

CONFIG_PPC_I8259=y

# CONFIG_PPC_RTAS is not set

# CONFIG_MMIO_NVRAM is not set

# CONFIG_PPC_MPC106 is not set
@@ -191,6 +181,8 @@ CONFIG_FLAT_NODE_MEM_MAP=y 
CONFIG_SPLIT_PTLOCK_CPUS=4

# CONFIG_RESOURCES_64BIT is not set

CONFIG_ZONE_DMA_FLAG=1

CONFIG_BOUNCE=y

CONFIG_VIRT_TO_BUS=y

CONFIG_PROC_DEVICETREE=y

CONFIG_CMDLINE_BOOL=y

CONFIG_CMDLINE="root=/dev/sda3 rw console=ttyS0,115200"
@@ -205,15 +197,21 @@ CONFIG_ISA_DMA_API=y 
#

CONFIG_ZONE_DMA=y

CONFIG_PPC_INDIRECT_PCI=y

CONFIG_PPC_INDIRECT_PCI_BE=y

CONFIG_FSL_SOC=y

# CONFIG_PCI is not set

# CONFIG_PCI_DOMAINS is not set

# CONFIG_ARCH_SUPPORTS_MSI is not set

CONFIG_FSL_PCI=y

CONFIG_PCI=y

CONFIG_PCI_DOMAINS=y

CONFIG_PCI_SYSCALL=y

# CONFIG_PCIEPORTBUS is not set

CONFIG_ARCH_SUPPORTS_MSI=y

# CONFIG_PCI_MSI is not set

# CONFIG_PCI_DEBUG is not set



#

# PCCARD (PCMCIA/CardBus) support

#

# CONFIG_PCCARD is not set

# CONFIG_HOTPLUG_PCI is not set



#

# Advanced setup
@@ -254,7 +252,6 @@ CONFIG_ASK_IP_FIB_HASH=y 
CONFIG_IP_FIB_HASH=y

CONFIG_IP_MULTIPLE_TABLES=y

CONFIG_IP_ROUTE_MULTIPATH=y

# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set

CONFIG_IP_ROUTE_VERBOSE=y

CONFIG_IP_PNP=y

CONFIG_IP_PNP_DHCP=y
@@ -330,6 +327,7 @@ CONFIG_FIB_RULES=y 
# CONFIG_MAC80211 is not set

# CONFIG_IEEE80211 is not set

# CONFIG_RFKILL is not set

# CONFIG_NET_9P is not set



#

# Device Drivers
@@ -340,45 +338,35 @@ CONFIG_FIB_RULES=y 
#

CONFIG_STANDALONE=y

CONFIG_PREVENT_FIRMWARE_BUILD=y

# CONFIG_FW_LOADER is not set

# CONFIG_DEBUG_DRIVER is not set

# CONFIG_DEBUG_DEVRES is not set

# CONFIG_SYS_HYPERVISOR is not set



#

# Connector - unified userspace <-> kernelspace linker

#

# CONFIG_CONNECTOR is not set

# CONFIG_MTD is not set



#

# Parallel port support

#

# CONFIG_PARPORT is not set



#

# Plug and Play support

#

# CONFIG_PNPACPI is not set



#

# Block devices

#

CONFIG_BLK_DEV=y

# CONFIG_BLK_DEV_FD is not set

# CONFIG_BLK_CPQ_DA is not set

# CONFIG_BLK_CPQ_CISS_DA is not set

# CONFIG_BLK_DEV_DAC960 is not set

# CONFIG_BLK_DEV_UMEM is not set

# CONFIG_BLK_DEV_COW_COMMON is not set

CONFIG_BLK_DEV_LOOP=y

# CONFIG_BLK_DEV_CRYPTOLOOP is not set

CONFIG_BLK_DEV_NBD=y

# CONFIG_BLK_DEV_SX8 is not set

CONFIG_BLK_DEV_RAM=y

CONFIG_BLK_DEV_RAM_COUNT=2

CONFIG_BLK_DEV_RAM_SIZE=16384

CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024

# CONFIG_CDROM_PKTCDVD is not set

# CONFIG_ATA_OVER_ETH is not set



#

# Misc devices

#

# CONFIG_BLINK is not set

CONFIG_MISC_DEVICES=y

# CONFIG_PHANTOM is not set

# CONFIG_EEPROM_93CX6 is not set

# CONFIG_SGI_IOC4 is not set

# CONFIG_TIFM_CORE is not set

# CONFIG_IDE is not set



#
@@ -386,6 +374,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 
#

# CONFIG_RAID_ATTRS is not set

CONFIG_SCSI=y

CONFIG_SCSI_DMA=y

# CONFIG_SCSI_TGT is not set

# CONFIG_SCSI_NETLINK is not set

CONFIG_SCSI_PROC_FS=y
@@ -422,25 +411,120 @@ CONFIG_SCSI_WAIT_SCAN=m 
# SCSI low-level drivers

#

# CONFIG_ISCSI_TCP is not set

# CONFIG_BLK_DEV_3W_XXXX_RAID is not set

# CONFIG_SCSI_3W_9XXX is not set

# CONFIG_SCSI_ACARD is not set

# CONFIG_SCSI_AACRAID is not set

# CONFIG_SCSI_AIC7XXX is not set

# CONFIG_SCSI_AIC7XXX_OLD is not set

# CONFIG_SCSI_AIC79XX is not set

# CONFIG_SCSI_AIC94XX is not set

# CONFIG_SCSI_DPT_I2O is not set

# CONFIG_SCSI_ARCMSR is not set

# CONFIG_MEGARAID_NEWGEN is not set

# CONFIG_MEGARAID_LEGACY is not set

# CONFIG_MEGARAID_SAS is not set

# CONFIG_SCSI_HPTIOP is not set

# CONFIG_SCSI_BUSLOGIC is not set

# CONFIG_SCSI_DMX3191D is not set

# CONFIG_SCSI_EATA is not set

# CONFIG_SCSI_FUTURE_DOMAIN is not set

# CONFIG_SCSI_GDTH is not set

# CONFIG_SCSI_IPS is not set

# CONFIG_SCSI_INITIO is not set

# CONFIG_SCSI_INIA100 is not set

# CONFIG_SCSI_STEX is not set

# CONFIG_SCSI_SYM53C8XX_2 is not set

# CONFIG_SCSI_IPR is not set

# CONFIG_SCSI_QLOGIC_1280 is not set

# CONFIG_SCSI_QLA_FC is not set

# CONFIG_SCSI_QLA_ISCSI is not set

# CONFIG_SCSI_LPFC is not set

# CONFIG_SCSI_DC395x is not set

# CONFIG_SCSI_DC390T is not set

# CONFIG_SCSI_NSP32 is not set

# CONFIG_SCSI_DEBUG is not set

# CONFIG_SCSI_SRP is not set

CONFIG_ATA=y

# CONFIG_ATA_NONSTANDARD is not set

# CONFIG_SATA_AHCI is not set

# CONFIG_SATA_SVW is not set

# CONFIG_ATA_PIIX is not set

# CONFIG_SATA_MV is not set

# CONFIG_SATA_NV is not set

# CONFIG_PDC_ADMA is not set

# CONFIG_SATA_QSTOR is not set

# CONFIG_SATA_PROMISE is not set

# CONFIG_SATA_SX4 is not set

# CONFIG_SATA_SIL is not set

# CONFIG_SATA_SIL24 is not set

# CONFIG_SATA_SIS is not set

# CONFIG_SATA_ULI is not set

# CONFIG_SATA_VIA is not set

# CONFIG_SATA_VITESSE is not set

# CONFIG_SATA_INIC162X is not set

# CONFIG_PATA_ALI is not set

# CONFIG_PATA_AMD is not set

# CONFIG_PATA_ARTOP is not set

# CONFIG_PATA_ATIIXP is not set

# CONFIG_PATA_CMD640_PCI is not set

# CONFIG_PATA_CMD64X is not set

# CONFIG_PATA_CS5520 is not set

# CONFIG_PATA_CS5530 is not set

# CONFIG_PATA_CYPRESS is not set

# CONFIG_PATA_EFAR is not set

# CONFIG_ATA_GENERIC is not set

# CONFIG_PATA_HPT366 is not set

# CONFIG_PATA_HPT37X is not set

# CONFIG_PATA_HPT3X2N is not set

# CONFIG_PATA_HPT3X3 is not set

# CONFIG_PATA_IT821X is not set

# CONFIG_PATA_IT8213 is not set

# CONFIG_PATA_JMICRON is not set

# CONFIG_PATA_TRIFLEX is not set

# CONFIG_PATA_MARVELL is not set

# CONFIG_PATA_MPIIX is not set

# CONFIG_PATA_OLDPIIX is not set

# CONFIG_PATA_NETCELL is not set

# CONFIG_PATA_NS87410 is not set

# CONFIG_PATA_OPTI is not set

# CONFIG_PATA_OPTIDMA is not set

# CONFIG_PATA_PDC_OLD is not set

# CONFIG_PATA_RADISYS is not set

# CONFIG_PATA_RZ1000 is not set

# CONFIG_PATA_SC1200 is not set

# CONFIG_PATA_SERVERWORKS is not set

# CONFIG_PATA_PDC2027X is not set

# CONFIG_PATA_SIL680 is not set

# CONFIG_PATA_SIS is not set

# CONFIG_PATA_VIA is not set

# CONFIG_PATA_WINBOND is not set

# CONFIG_PATA_PLATFORM is not set

# CONFIG_MD is not set



#

# Multi-device support (RAID and LVM)

# Fusion MPT device support

#

# CONFIG_MD is not set

# CONFIG_MACINTOSH_DRIVERS is not set

# CONFIG_FUSION is not set

# CONFIG_FUSION_SPI is not set

# CONFIG_FUSION_FC is not set

# CONFIG_FUSION_SAS is not set



#

# Network device support

# IEEE 1394 (FireWire) support

#

# CONFIG_FIREWIRE is not set

# CONFIG_IEEE1394 is not set

# CONFIG_I2O is not set

# CONFIG_MACINTOSH_DRIVERS is not set

CONFIG_NETDEVICES=y

# CONFIG_NETDEVICES_MULTIQUEUE is not set

# CONFIG_DUMMY is not set

# CONFIG_BONDING is not set

# CONFIG_MACVLAN is not set

# CONFIG_EQUALIZER is not set

# CONFIG_TUN is not set

# CONFIG_ARCNET is not set

CONFIG_PHYLIB=y



#
@@ -454,17 +538,44 @@ CONFIG_PHYLIB=y 
CONFIG_VITESSE_PHY=y

# CONFIG_SMSC_PHY is not set

# CONFIG_BROADCOM_PHY is not set

# CONFIG_ICPLUS_PHY is not set

# CONFIG_FIXED_PHY is not set



#

# Ethernet (10 or 100Mbit)

#

CONFIG_NET_ETHERNET=y

CONFIG_MII=y

# CONFIG_HAPPYMEAL is not set

# CONFIG_SUNGEM is not set

# CONFIG_CASSINI is not set

# CONFIG_NET_VENDOR_3COM is not set

# CONFIG_NET_TULIP is not set

# CONFIG_HP100 is not set

# CONFIG_NET_PCI is not set

CONFIG_NETDEV_1000=y

# CONFIG_ACENIC is not set

# CONFIG_DL2K is not set

# CONFIG_E1000 is not set

# CONFIG_NS83820 is not set

# CONFIG_HAMACHI is not set

# CONFIG_YELLOWFIN is not set

# CONFIG_R8169 is not set

# CONFIG_SIS190 is not set

# CONFIG_SKGE is not set

# CONFIG_SKY2 is not set

# CONFIG_VIA_VELOCITY is not set

# CONFIG_TIGON3 is not set

# CONFIG_BNX2 is not set

CONFIG_GIANFAR=y

CONFIG_GFAR_NAPI=y

# CONFIG_QLA3XXX is not set

# CONFIG_ATL1 is not set

CONFIG_NETDEV_10000=y

# CONFIG_CHELSIO_T1 is not set

# CONFIG_CHELSIO_T3 is not set

# CONFIG_IXGB is not set

# CONFIG_S2IO is not set

# CONFIG_MYRI10GE is not set

# CONFIG_NETXEN_NIC is not set

# CONFIG_MLX4_CORE is not set

# CONFIG_TR is not set



#

# Wireless LAN
@@ -472,21 +583,16 @@ CONFIG_NETDEV_10000=y 
# CONFIG_WLAN_PRE80211 is not set

# CONFIG_WLAN_80211 is not set

# CONFIG_WAN is not set

# CONFIG_FDDI is not set

# CONFIG_HIPPI is not set

# CONFIG_PPP is not set

# CONFIG_SLIP is not set

# CONFIG_NET_FC is not set

# CONFIG_SHAPER is not set

# CONFIG_NETCONSOLE is not set

# CONFIG_NETPOLL is not set

# CONFIG_NET_POLL_CONTROLLER is not set



#

# ISDN subsystem

#

# CONFIG_ISDN is not set



#

# Telephony Support

#

# CONFIG_PHONE is not set



#
@@ -521,6 +627,7 @@ CONFIG_INPUT=y 
CONFIG_SERIO=y

CONFIG_SERIO_I8042=y

CONFIG_SERIO_SERPORT=y

# CONFIG_SERIO_PCIPS2 is not set

CONFIG_SERIO_LIBPS2=y

# CONFIG_SERIO_RAW is not set

# CONFIG_GAMEPORT is not set
@@ -539,6 +646,7 @@ CONFIG_HW_CONSOLE=y 
#

CONFIG_SERIAL_8250=y

CONFIG_SERIAL_8250_CONSOLE=y

CONFIG_SERIAL_8250_PCI=y

CONFIG_SERIAL_8250_NR_UARTS=4

CONFIG_SERIAL_8250_RUNTIME_UARTS=4

# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -550,14 +658,11 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y 
# CONFIG_SERIAL_UARTLITE is not set

CONFIG_SERIAL_CORE=y

CONFIG_SERIAL_CORE_CONSOLE=y

# CONFIG_SERIAL_JSM is not set

# CONFIG_SERIAL_OF_PLATFORM is not set

CONFIG_UNIX98_PTYS=y

CONFIG_LEGACY_PTYS=y

CONFIG_LEGACY_PTY_COUNT=256



#

# IPMI

#

# CONFIG_IPMI_HANDLER is not set

# CONFIG_WATCHDOG is not set

# CONFIG_HW_RANDOM is not set
@@ -565,12 +670,12 @@ CONFIG_NVRAM=y 
CONFIG_GEN_RTC=y

CONFIG_GEN_RTC_X=y

# CONFIG_R3964 is not set

# CONFIG_APPLICOM is not set

# CONFIG_AGP is not set

# CONFIG_DRM is not set

# CONFIG_RAW_DRIVER is not set



#

# TPM devices

#

# CONFIG_TCG_TPM is not set

CONFIG_DEVPORT=y

# CONFIG_I2C is not set



#
@@ -578,11 +683,8 @@ CONFIG_GEN_RTC_X=y 
#

# CONFIG_SPI is not set

# CONFIG_SPI_MASTER is not set



#

# Dallas's 1-wire bus

#

# CONFIG_W1 is not set

# CONFIG_POWER_SUPPLY is not set

# CONFIG_HWMON is not set



#
@@ -655,19 +757,14 @@ CONFIG_DUMMY_CONSOLE=y 
# Sound

#

# CONFIG_SOUND is not set



#

# HID Devices

#

CONFIG_HID_SUPPORT=y

CONFIG_HID=y

# CONFIG_HID_DEBUG is not set



#

# USB support

#

# CONFIG_USB_ARCH_HAS_HCD is not set

# CONFIG_USB_ARCH_HAS_OHCI is not set

# CONFIG_USB_ARCH_HAS_EHCI is not set

CONFIG_USB_SUPPORT=y

CONFIG_USB_ARCH_HAS_HCD=y

CONFIG_USB_ARCH_HAS_OHCI=y

CONFIG_USB_ARCH_HAS_EHCI=y

# CONFIG_USB is not set



#

# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -691,14 +788,7 @@ CONFIG_HID=y 
#

# LED Triggers

#



#

# InfiniBand support

#



#

# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)

#

# CONFIG_INFINIBAND is not set



#

# Real Time Clock
@@ -718,20 +808,14 @@ CONFIG_RTC_INTF_DEV=y 
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set

# CONFIG_RTC_DRV_TEST is not set



#

# I2C RTC drivers

#



#

# SPI RTC drivers

#



#

# Platform RTC drivers

#

# CONFIG_RTC_DRV_CMOS is not set

# CONFIG_RTC_DRV_DS1553 is not set

# CONFIG_RTC_DRV_DS1742 is not set

# CONFIG_RTC_DRV_M48T86 is not set

# CONFIG_RTC_DRV_M48T59 is not set

# CONFIG_RTC_DRV_V3020 is not set



#
@@ -751,6 +835,11 @@ CONFIG_RTC_INTF_DEV=y 
# DMA Devices

#



#

# Userspace I/O

#

# CONFIG_UIO is not set



#

# File systems

#
@@ -859,7 +948,6 @@ CONFIG_RPCSEC_GSS_KRB5=y 
# CONFIG_NCP_FS is not set

# CONFIG_CODA_FS is not set

# CONFIG_AFS_FS is not set

# CONFIG_9P_FS is not set



#

# Partition Types
@@ -941,6 +1029,7 @@ CONFIG_BITREVERSE=y 
# CONFIG_CRC16 is not set

# CONFIG_CRC_ITU_T is not set

CONFIG_CRC32=y

# CONFIG_CRC7 is not set

CONFIG_LIBCRC32C=m

CONFIG_ZLIB_INFLATE=y

CONFIG_PLIST=y
@@ -965,6 +1054,7 @@ CONFIG_ENABLE_MUST_CHECK=y 
CONFIG_DEBUG_KERNEL=y

# CONFIG_DEBUG_SHIRQ is not set

CONFIG_DETECT_SOFTLOCKUP=y

CONFIG_SCHED_DEBUG=y

# CONFIG_SCHEDSTATS is not set

# CONFIG_TIMER_STATS is not set

# CONFIG_DEBUG_SLAB is not set
@@ -996,10 +1086,6 @@ CONFIG_FORCED_INLINING=y 
#

# CONFIG_KEYS is not set

# CONFIG_SECURITY is not set



#

# Cryptographic options

#

CONFIG_CRYPTO=y

CONFIG_CRYPTO_ALGAPI=y

CONFIG_CRYPTO_BLKCIPHER=y
@@ -1038,7 +1124,4 @@ CONFIG_CRYPTO_DES=y 
# CONFIG_CRYPTO_CRC32C is not set

# CONFIG_CRYPTO_CAMELLIA is not set

# CONFIG_CRYPTO_TEST is not set



#

# Hardware crypto devices

#
 
CONFIG_CRYPTO_HW=y

arch/powerpc/platforms/85xx/Kconfig

+1 −0
Original line number Diff line number Diff line
@@ -30,6 +30,7 @@ config MPC85xx_MDS 


config MPC8544_DS

	bool "Freescale MPC8544 DS"

	select PPC_I8259

	select DEFAULT_UIMAGE

	help

	  This option enables support for the MPC8544 DS board

arch/powerpc/platforms/85xx/mpc8544_ds.c

+240 −1

File changed.

Preview size limit exceeded, changes collapsed.

arch/powerpc/sysdev/fsl_pci.c

+2 −0
Original line number Diff line number Diff line
@@ -226,5 +226,7 @@ DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0020, quirk_fsl_pcie_transparent); 
DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0021, quirk_fsl_pcie_transparent);

DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0024, quirk_fsl_pcie_transparent);

DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0025, quirk_fsl_pcie_transparent);

DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0030, quirk_fsl_pcie_transparent);

DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0031, quirk_fsl_pcie_transparent);

DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7010, quirk_fsl_pcie_transparent);

DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7011, quirk_fsl_pcie_transparent);