Merge remote-tracking branches 'asoc/topic/stm32', 'asoc/topic/sunxi',... (f116d2ff) · Commits · e / devices / android_kernel_fairphone_FP4

Documentation/devicetree/bindings/sound/st,stm32-i2s.txt

0 → 100644

+62 −0

Original line number	Diff line number	Diff line
		STMicroelectronics STM32 SPI/I2S Controller

		The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
		Only some SPI instances support I2S.

		Required properties:
		- compatible: Must be "st,stm32h7-i2s"
		- reg: Offset and length of the device's register set.
		- interrupts: Must contain the interrupt line id.
		- clocks: Must contain phandle and clock specifier pairs for each entry
		in clock-names.
		- clock-names: Must contain "i2sclk", "pclk", "x8k" and "x11k".
		"i2sclk": clock which feeds the internal clock generator
		"pclk": clock which feeds the peripheral bus interface
		"x8k": I2S parent clock for sampling rates multiple of 8kHz.
		"x11k": I2S parent clock for sampling rates multiple of 11.025kHz.
		- dmas: DMA specifiers for tx and rx dma.
		See Documentation/devicetree/bindings/dma/stm32-dma.txt.
		- dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
		- pinctrl-names: should contain only value "default"
		- pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt

		Optional properties:
		- resets: Reference to a reset controller asserting the reset controller

		The device node should contain one 'port' child node with one child 'endpoint'
		node, according to the bindings defined in Documentation/devicetree/bindings/
		graph.txt.

		Example:
		sound_card {
		compatible = "audio-graph-card";
		dais = <&i2s2_port>;
		};

		i2s2: audio-controller@40003800 {
		compatible = "st,stm32h7-i2s";
		reg = <0x40003800 0x400>;
		interrupts = <36>;
		clocks = <&rcc PCLK1>, <&rcc SPI2_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
		clock-names = "pclk", "i2sclk", "x8k", "x11k";
		dmas = <&dmamux2 2 39 0x400 0x1>,
		<&dmamux2 3 40 0x400 0x1>;
		dma-names = "rx", "tx";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2s2>;

		i2s2_port: port@0 {
		cpu_endpoint: endpoint {
		remote-endpoint = <&codec_endpoint>;
		format = "i2s";
		};
		};
		};

		audio-codec {
		codec_port: port@0 {
		codec_endpoint: endpoint {
		remote-endpoint = <&cpu_endpoint>;
		};
		};
		};

Documentation/devicetree/bindings/sound/st,stm32-sai.txt

+18 −23

Original line number	Diff line number	Diff line
		@@ -6,7 +6,7 @@ The SAI contains two independent audio sub-blocks. Each sub-block has
		its own clock generator and I/O lines controller.

		Required properties:
		- compatible: Should be "st,stm32f4-sai"
		- compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai"
		- reg: Base address and size of SAI common register set.
		- clocks: Must contain phandle and clock specifier pairs for each entry
		in clock-names.
		@@ -36,6 +36,10 @@ SAI subnodes required properties:
		- pinctrl-names: should contain only value "default"
		- pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt

		The device node should contain one 'port' child node with one child 'endpoint'
		node, according to the bindings defined in Documentation/devicetree/bindings/
		graph.txt.

		Example:
		sound_card {
		compatible = "audio-graph-card";
		@@ -43,38 +47,29 @@ sound_card {
		};

		sai1: sai1@40015800 {
		compatible = "st,stm32f4-sai";
		compatible = "st,stm32h7-sai";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		ranges = <0 0x40015800 0x400>;
		reg = <0x40015800 0x4>;
		clocks = <&rcc 1 CLK_SAIQ_PDIV>, <&rcc 1 CLK_I2SQ_PDIV>;
		clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>;
		clock-names = "x8k", "x11k";
		interrupts = <87>;

		sai1b: audio-controller@40015824 {
		#sound-dai-cells = <0>;
		compatible = "st,stm32-sai-sub-b";
		reg = <0x40015824 0x1C>;
		clocks = <&rcc 1 CLK_SAI2>;
		sai1a: audio-controller@40015804 {
		compatible = "st,stm32-sai-sub-a";
		reg = <0x4 0x1C>;
		clocks = <&rcc SAI1_CK>;
		clock-names = "sai_ck";
		dmas = <&dma2 5 0 0x400 0x0>;
		dmas = <&dmamux1 1 87 0x400 0x0>;
		dma-names = "tx";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_sai1b>;

		ports {
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-0 = <&pinctrl_sai1a>;

		sai1b_port: port@0 {
		reg = <0>;
		sai1b_port: port {
		cpu_endpoint: endpoint {
		remote-endpoint = <&codec_endpoint>;
		audio-graph-card,format = "i2s";
		audio-graph-card,bitclock-master = <&codec_endpoint>;
		audio-graph-card,frame-master = <&codec_endpoint>;
		};
		format = "i2s";
		};
		};
		};

Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt

0 → 100644

+56 −0

Original line number	Diff line number	Diff line
		STMicroelectronics STM32 S/PDIF receiver (SPDIFRX).

		The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
		IEC-60958 and IEC-61937.

		Required properties:
		- compatible: should be "st,stm32h7-spdifrx"
		- reg: cpu DAI IP base address and size
		- clocks: must contain an entry for kclk (used as S/PDIF signal reference)
		- clock-names: must contain "kclk"
		- interrupts: cpu DAI interrupt line
		- dmas: DMA specifiers for audio data DMA and iec control flow DMA
		See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt
		- dma-names: two dmas have to be defined, "rx" and "rx-ctrl"

		Optional properties:
		- resets: Reference to a reset controller asserting the SPDIFRX

		The device node should contain one 'port' child node with one child 'endpoint'
		node, according to the bindings defined in Documentation/devicetree/bindings/
		graph.txt.

		Example:
		spdifrx: spdifrx@40004000 {
		compatible = "st,stm32h7-spdifrx";
		reg = <0x40004000 0x400>;
		clocks = <&rcc SPDIFRX_CK>;
		clock-names = "kclk";
		interrupts = <97>;
		dmas = <&dmamux1 2 93 0x400 0x0>,
		<&dmamux1 3 94 0x400 0x0>;
		dma-names = "rx", "rx-ctrl";
		pinctrl-0 = <&spdifrx_pins>;
		pinctrl-names = "default";

		spdifrx_port: port {
		cpu_endpoint: endpoint {
		remote-endpoint = <&codec_endpoint>;
		};
		};
		};

		spdif_in: spdif-in {
		compatible = "linux,spdif-dir";

		codec_port: port {
		codec_endpoint: endpoint {
		remote-endpoint = <&cpu_endpoint>;
		};
		};
		};

		soundcard {
		compatible = "audio-graph-card";
		dais = <&spdifrx_port>;
		};

Documentation/devicetree/bindings/sound/sun4i-codec.txt

+7 −4

Original line number	Diff line number	Diff line
		@@ -7,6 +7,7 @@ Required properties:
		- "allwinner,sun7i-a20-codec"
		- "allwinner,sun8i-a23-codec"
		- "allwinner,sun8i-h3-codec"
		- "allwinner,sun8i-v3s-codec"
		- reg: must contain the registers location and length
		- interrupts: must contain the codec interrupt
		- dmas: DMA channels for tx and rx dma. See the DMA client binding,
		@@ -25,6 +26,7 @@ Required properties for the following compatibles:
		- "allwinner,sun6i-a31-codec"
		- "allwinner,sun8i-a23-codec"
		- "allwinner,sun8i-h3-codec"
		- "allwinner,sun8i-v3s-codec"
		- resets: phandle to the reset control for this device
		- allwinner,audio-routing: A list of the connections between audio components.
		Each entry is a pair of strings, the first being the
		@@ -34,15 +36,15 @@ Required properties for the following compatibles:
		Audio pins on the SoC:
		"HP"
		"HPCOM"
		"LINEIN"
		"LINEOUT" (not on sun8i-a23)
		"LINEIN" (not on sun8i-v3s)
		"LINEOUT" (not on sun8i-a23 or sun8i-v3s)
		"MIC1"
		"MIC2"
		"MIC2" (not on sun8i-v3s)
		"MIC3" (sun6i-a31 only)

		Microphone biases from the SoC:
		"HBIAS"
		"MBIAS"
		"MBIAS" (not on sun8i-v3s)

		Board connectors:
		"Headphone"
		@@ -55,6 +57,7 @@ Required properties for the following compatibles:
		Required properties for the following compatibles:
		- "allwinner,sun8i-a23-codec"
		- "allwinner,sun8i-h3-codec"
		- "allwinner,sun8i-v3s-codec"
		- allwinner,codec-analog-controls: A phandle to the codec analog controls
		block in the PRCM.

Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt

+1 −0

Original line number	Diff line number	Diff line
		@@ -4,6 +4,7 @@ Required properties:
		- compatible: must be one of the following compatibles:
		- "allwinner,sun8i-a23-codec-analog"
		- "allwinner,sun8i-h3-codec-analog"
		- "allwinner,sun8i-v3s-codec-analog"

		Required properties if not a sub-node of the PRCM node:
		- reg: must contain the registers location and length