ARM: at91: add Ronetix pm9g45 board support (ee867d8e) · Commits · e / devices / android_kernel_fairphone_FP4

arch/arm/boot/dts/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
		dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
		# sam9g45
		dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
		dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
		# sam9n12
		dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
		# sam9x5

arch/arm/boot/dts/pm9g45.dts

0 → 100644

+144 −0

Original line number	Diff line number	Diff line
		/*
		* pm9g45.dts - Device Tree file for Ronetix pm9g45 board
		*
		* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
		*
		* Licensed under GPLv2.
		*/
		/dts-v1/;
		/include/ "at91sam9g45.dtsi"

		/ {
		model = "Ronetix pm9g45";
		compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9";

		chosen {
		bootargs = "console=ttyS0,115200";
		};

		memory {
		reg = <0x70000000 0x8000000>;
		};

		clocks {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		main_clock: clock@0 {
		compatible = "atmel,osc", "fixed-clock";
		clock-frequency = <12000000>;
		};
		};

		ahb {
		apb {
		dbgu: serial@ffffee00 {
		status = "okay";
		};

		pinctrl@fffff200 {

		board {
		pinctrl_board_nand: nand0-board {
		atmel,pins =
		<3 3 0x0 0x1 /* PD3 gpio RDY pin pull_up*/
		2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */
		};
		};
		};

		macb0: ethernet@fffbc000 {
		phy-mode = "rmii";
		status = "okay";
		};
		};

		nand0: nand@40000000 {
		nand-bus-width = <8>;
		nand-ecc-mode = "soft";
		nand-on-flash-bbt;
		pinctrl-0 = <&pinctrl_board_nand>;

		gpios = <&pioD 3 0
		&pioC 14 0
		0
		>;

		status = "okay";

		at91bootstrap@0 {
		label = "at91bootstrap";
		reg = <0x0 0x20000>;
		};

		barebox@20000 {
		label = "barebox";
		reg = <0x20000 0x40000>;
		};

		bareboxenv@60000 {
		label = "bareboxenv";
		reg = <0x60000 0x1A0000>;
		};

		kernel@200000 {
		label = "bareboxenv2";
		reg = <0x200000 0x300000>;
		};

		kernel@500000 {
		label = "root";
		reg = <0x500000 0x400000>;
		};

		data@900000 {
		label = "data";
		reg = <0x900000 0x8340000>;
		};
		};

		usb0: ohci@00700000 {
		status = "okay";
		num-ports = <2>;
		};

		usb1: ehci@00800000 {
		status = "okay";
		};
		};

		leds {
		compatible = "gpio-leds";

		led0 {
		label = "led0";
		gpios = <&pioD 0 1>;
		linux,default-trigger = "nand-disk";
		};

		led1 {
		label = "led1";
		gpios = <&pioD 31 0>;
		linux,default-trigger = "heartbeat";
		};
		};

		gpio_keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;

		right {
		label = "SW4";
		gpios = <&pioE 7 1>;
		linux,code = <106>;
		};

		up {
		label = "SW3";
		gpios = <&pioE 8 1>;
		linux,code = <103>;
		};
		};
		};