Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit ed22fee3 authored by Sourav Poddar's avatar Sourav Poddar Committed by Benoit Cousson
Browse files

ARM: dts: omap5-uevm: Add uart pinctrl data 



Booting omap5 uevm results in the following error
"did not get pins for uart error: -19"

This happens because omap5 uevm dts file is not adapted
to use uart through pinctrl framework.
Populate uart pinctrl data to get rid of the error.

Signed-off-by: default avatarSourav Poddar <sourav.poddar@ti.com>
[r.sricharan@ti.com: Replaced constants with preprocessor macros]
Signed-off-by: default avatarSricharan R <r.sricharan@ti.com>
Signed-off-by: default avatarBenoit Cousson <benoit.cousson@linaro.org>
parent 66155302

arch/arm/boot/dts/omap5-uevm.dts

+41 −0
Original line number Original line Diff line number Diff line
@@ -184,6 +184,32 @@ 
			0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */

			0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */

		>;

		>;

	};

	};



	uart1_pins: pinmux_uart1_pins {

		pinctrl-single,pins = <

			0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */

			0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */

			0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */

			0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */

		>;

	};



	uart3_pins: pinmux_uart3_pins {

		pinctrl-single,pins = <

			0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */

			0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */

		>;

	};



	uart5_pins: pinmux_uart5_pins {

		pinctrl-single,pins = <

			0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */

			0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */

			0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */

			0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */

		>;

	};



};

};





&omap5_pmx_wkup {

&omap5_pmx_wkup {
@@ -268,3 +294,18 @@ 
	pinctrl-names = "default";

	pinctrl-names = "default";

	pinctrl-0 = <&mcspi4_pins>;

	pinctrl-0 = <&mcspi4_pins>;

};

};



&uart1 {

        pinctrl-names = "default";

        pinctrl-0 = <&uart1_pins>;

};



&uart3 {

        pinctrl-names = "default";

        pinctrl-0 = <&uart3_pins>;

};



&uart5 {

        pinctrl-names = "default";

        pinctrl-0 = <&uart5_pins>;

};