[ARM] mmp: support jasper development board (e1cb7db2) · Commits · e / devices / android_kernel_fairphone_FP4

arch/arm/mach-mmp/Kconfig

+10 −0

Original line number	Original line	Diff line number	Diff line
	@@ -47,6 +47,16 @@ config MACH_FLINT
	PXA910-based development board. Since MMP2 is compatible to		PXA910-based development board. Since MMP2 is compatible to
	ARMv6 architecture.		ARMv6 architecture.

			config MACH_MARVELL_JASPER
			bool "Marvell's Jasper Development Platform"
			select CPU_MMP2
			help
			Say 'Y' here if you want to support the Marvell MMP2-base
			Jasper Development Platform.
			MMP2-based board can't be co-existed with PXA168-based &
			PXA910-based development board. Since MMP2 is compatible to
			ARMv6 architecture.

	endmenu		endmenu

	config CPU_PXA168		config CPU_PXA168

arch/arm/mach-mmp/Makefile

+1 −0

Original line number	Original line	Diff line number	Diff line
	@@ -16,3 +16,4 @@ obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
	obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o		obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
	obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o		obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o
	obj-$(CONFIG_MACH_FLINT) += flint.o		obj-$(CONFIG_MACH_FLINT) += flint.o
			obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o

arch/arm/mach-mmp/jasper.c

0 → 100644

+80 −0

Original line number	Original line	Diff line number	Diff line
			/*
			* linux/arch/arm/mach-mmp/jasper.c
			*
			* Support for the Marvell Jasper Development Platform.
			*
			* Copyright (C) 2009-2010 Marvell International Ltd.
			*
			* This program is free software; you can redistribute it and/or modify
			* it under the terms of the GNU General Public License version 2 as
			* publishhed by the Free Software Foundation.
			*/

			#include <linux/init.h>
			#include <linux/kernel.h>
			#include <linux/platform_device.h>
			#include <linux/io.h>
			#include <linux/gpio.h>

			#include <asm/mach-types.h>
			#include <asm/mach/arch.h>
			#include <mach/addr-map.h>
			#include <mach/mfp-mmp2.h>
			#include <mach/mmp2.h>

			#include "common.h"

			static unsigned long jasper_pin_config[] __initdata = {
			/* UART1 */
			GPIO29_UART1_RXD,
			GPIO30_UART1_TXD,

			/* UART3 */
			GPIO51_UART3_RXD,
			GPIO52_UART3_TXD,

			/* DFI */
			GPIO168_DFI_D0,
			GPIO167_DFI_D1,
			GPIO166_DFI_D2,
			GPIO165_DFI_D3,
			GPIO107_DFI_D4,
			GPIO106_DFI_D5,
			GPIO105_DFI_D6,
			GPIO104_DFI_D7,
			GPIO111_DFI_D8,
			GPIO164_DFI_D9,
			GPIO163_DFI_D10,
			GPIO162_DFI_D11,
			GPIO161_DFI_D12,
			GPIO110_DFI_D13,
			GPIO109_DFI_D14,
			GPIO108_DFI_D15,
			GPIO143_ND_nCS0,
			GPIO144_ND_nCS1,
			GPIO147_ND_nWE,
			GPIO148_ND_nRE,
			GPIO150_ND_ALE,
			GPIO149_ND_CLE,
			GPIO112_ND_RDY0,
			GPIO160_ND_RDY1,
			};

			static void __init jasper_init(void)
			{
			mfp_config(ARRAY_AND_SIZE(jasper_pin_config));

			/* on-chip devices */
			mmp2_add_uart(1);
			mmp2_add_uart(3);
			}

			MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
			.phys_io = APB_PHYS_BASE,
			.boot_params = 0x00000100,
			.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
			.map_io = pxa_map_io,
			.init_irq = mmp2_init_irq,
			.timer = &mmp2_timer,
			.init_machine = jasper_init,
			MACHINE_END