Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

* Clock bindings for Freescale i.MX27

Required properties:

- compatible: Should be "fsl,imx27-ccm"

- reg: Address and length of the register set

- interrupts: Should contain CCM interrupt

- #clock-cells: Should be <1>

The clock consumer should specify the desired clock by having the clock

ID in its "clocks" phandle cell.  The following is a full list of i.MX27

clocks and IDs.

	Clock		    ID

	-----------------------

	dummy                0

	ckih                 1

	ckil                 2

	mpll                 3

	spll                 4

	mpll_main2           5

	ahb                  6

	ipg                  7

	nfc_div              8

	per1_div             9

	per2_div             10

	per3_div             11

	per4_div             12

	vpu_sel              13

	vpu_div              14

	usb_div              15

	cpu_sel              16

	clko_sel             17

	cpu_div              18

	clko_div             19

	ssi1_sel             20

	ssi2_sel             21

	ssi1_div             22

	ssi2_div             23

	clko_en              24

	ssi2_ipg_gate        25

	ssi1_ipg_gate        26

	slcdc_ipg_gate       27

	sdhc3_ipg_gate       28

	sdhc2_ipg_gate       29

	sdhc1_ipg_gate       30

	scc_ipg_gate         31

	sahara_ipg_gate      32

	rtc_ipg_gate         33

	pwm_ipg_gate         34

	owire_ipg_gate       35

	lcdc_ipg_gate        36

	kpp_ipg_gate         37

	iim_ipg_gate         38

	i2c2_ipg_gate        39

	i2c1_ipg_gate        40

	gpt6_ipg_gate        41

	gpt5_ipg_gate        42

	gpt4_ipg_gate        43

	gpt3_ipg_gate        44

	gpt2_ipg_gate        45

	gpt1_ipg_gate        46

	gpio_ipg_gate        47

	fec_ipg_gate         48

	emma_ipg_gate        49

	dma_ipg_gate         50

	cspi3_ipg_gate       51

	cspi2_ipg_gate       52

	cspi1_ipg_gate       53

	nfc_baud_gate        54

	ssi2_baud_gate       55

	ssi1_baud_gate       56

	vpu_baud_gate        57

	per4_gate            58

	per3_gate            59

	per2_gate            60

	per1_gate            61

	usb_ahb_gate         62

	slcdc_ahb_gate       63

	sahara_ahb_gate      64

	lcdc_ahb_gate        65

	vpu_ahb_gate         66

	fec_ahb_gate         67

	emma_ahb_gate        68

	emi_ahb_gate         69

	dma_ahb_gate         70

	csi_ahb_gate         71

	brom_ahb_gate        72

	ata_ahb_gate         73

	wdog_ipg_gate        74

	usb_ipg_gate         75

	uart6_ipg_gate       76

	uart5_ipg_gate       77

	uart4_ipg_gate       78

	uart3_ipg_gate       79

	uart2_ipg_gate       80

	uart1_ipg_gate       81

	ckih_div1p5          82

	fpm                  83

	mpll_osc_sel         84

	mpll_sel             85

Examples:

clks: ccm@10027000{

	compatible = "fsl,imx27-ccm";

	reg = <0x10027000 0x1000>;

	#clock-cells = <1>;

};

uart1: serial@1000a000 {

	compatible = "fsl,imx27-uart", "fsl,imx21-uart";

	reg = <0x1000a000 0x1000>;

	interrupts = <20>;

	clocks = <&clks 81>, <&clks 61>;

	clock-names = "ipg", "per";

	status = "disabled";

};

Required properties for pin configuration node:

- fsl,pins: two integers array, represents a group of pins mux and config

  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a

  pin working on a specific function, CONFIG is the pad setting value like

  pull-up on this pin. Please refer to fsl,<soc>-pinctrl.txt for the valid

  pins and functions of each SoC.

  pin working on a specific function, which consists of a tuple of

  <mux_reg conf_reg input_reg mux_val input_val>.  CONFIG is the pad setting

  value like pull-up on this pin.

Bits used for CONFIG:

NO_PAD_CTL(1 << 31): indicate this pin does not need config.