Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d928cd2e authored by Afzal Mohammed's avatar Afzal Mohammed Committed by Felipe Balbi
Browse files

usb: musb: dsps: document dt bindings properly 



DT bindings normally use '-' (hyphens) instead of '_' (underscore),
driver has it the proper way, but binding documentation does not
reflect it, fix it.

Signed-off-by: default avatarAfzal Mohammed <afzal@ti.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent d7554226

Documentation/devicetree/bindings/usb/am33xx-usb.txt

+4 −4
Original line number Diff line number Diff line
@@ -3,12 +3,12 @@ AM33XX MUSB GLUE 
 - ti,hwmods : must be "usb_otg_hs"

 - multipoint : Should be "1" indicating the musb controller supports

   multipoint. This is a MUSB configuration-specific setting.

 - num_eps : Specifies the number of endpoints. This is also a

 - num-eps : Specifies the number of endpoints. This is also a

   MUSB configuration-specific setting. Should be set to "16"

 - ram_bits : Specifies the ram address size. Should be set to "12"

 - port0_mode : Should be "3" to represent OTG. "1" signifies HOST and "2"

 - ram-bits : Specifies the ram address size. Should be set to "12"

 - port0-mode : Should be "3" to represent OTG. "1" signifies HOST and "2"

   represents PERIPHERAL.

 - port1_mode : Should be "1" to represent HOST. "3" signifies OTG and "2"

 - port1-mode : Should be "1" to represent HOST. "3" signifies OTG and "2"

   represents PERIPHERAL.

 - power : Should be "250". This signifies the controller can supply upto

   500mA when operating in host mode.