fw-api: CL 25234039 - update fw common interface files (d8f38efc) · Commits · e / devices / android_kernel_fairphone_FP4

fw/wmi_tlv_defs.h

+3 −1

Original line number	Diff line number	Diff line
		@@ -1418,6 +1418,7 @@ typedef enum {
		WMITLV_TAG_STRUC_wmi_peer_multiple_reorder_queue_setup_cmd_fixed_param,
		WMITLV_TAG_STRUC_wmi_peer_per_reorder_q_setup_params_t,
		WMITLV_TAG_STRUC_wmi_coex_multiple_config_cmd_fixed_param,
		WMITLV_TAG_STRUC_wmi_disallowed_mlo_mode_bitmap_param,
		} WMITLV_TAG_ID;
		/*
		* IMPORTANT: Please add _ALL_ WMI Commands Here.
		@@ -5194,7 +5195,8 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_ENABLE_DURATION_BASED_TX_MODE_SELECTION_CMDID
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, vdev_id_bitmap, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, vdev_id_bitmap2, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, ieee_link_id_bitmap, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, ieee_link_id_bitmap2, WMITLV_SIZE_VAR)
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, ieee_link_id_bitmap2, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_disallowed_mlo_mode_bitmap_param, disallow_mode_param, WMITLV_SIZE_VAR)
		WMITLV_CREATE_PARAM_STRUC(WMI_MLO_LINK_SET_ACTIVE_CMDID);

		/* Request DPD Status */

fw/wmi_unified.h

+74 −0

Original line number	Diff line number	Diff line
		@@ -44671,6 +44671,7 @@ typedef enum {
		WMI_MLO_LINK_FORCE_INACTIVE_LINK_NUM = 4, /* Force inactive a number of links, firmware to decide which links to inactive */
		WMI_MLO_LINK_NO_FORCE = 5, /* Cancel the force operation of specific links, allow firmware to decide */
		WMI_MLO_LINK_FORCE_ACTIVE_INACTIVE = 6, /* combination of force specific links active & force specific links inactive */
		WMI_MLO_LINK_NON_FORCE_UPDATE = 7, /* Used when host wants to update other fields like disallow_mlo_mode_bmap */
		} WMI_MLO_LINK_FORCE_MODE;

		typedef enum {
		@@ -44764,6 +44765,8 @@ typedef struct wmi_mlo_link_set_active_cmd
		* For force mode WMI_MLO_LINK_FORCE_ACTIVE_INACTIVE ieee_link_id_bitmap2[]
		* carry the inactive linkid bitmap.
		* In other cases the length of the array should be 0.
		*---
		* wmi_disallowed_mlo_mode_bitmap_param_t disallow_mlo_mode_bmap[];
		*/
		} wmi_mlo_link_set_active_cmd_fixed_param;

		@@ -44785,6 +44788,77 @@ typedef struct wmi_mlo_set_active_link_number_param

		} wmi_mlo_set_active_link_number_param;

		#define WMI_MLO_MODE_MLMR 0x1;
		#define WMI_MLO_MODE_EMLSR 0x2;


		#define WMI_MLO_IEEE_LINK_ID_COMB_GET_LINK_ID1(ieee_link_id_comb) WMI_GET_BITS(ieee_link_id_comb, 0, 8)
		#define WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID1(ieee_link_id_comb, value) WMI_SET_BITS(ieee_link_id_comb, 0, 8, value)

		#define WMI_MLO_IEEE_LINK_ID_COMB_GET_LINK_ID2(ieee_link_id_comb) WMI_GET_BITS(ieee_link_id_comb, 8, 8)
		#define WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID2(ieee_link_id_comb, value) WMI_SET_BITS(ieee_link_id_comb, 8, 8, value)

		#define WMI_MLO_IEEE_LINK_ID_COMB_GET_LINK_ID3(ieee_link_id_comb) WMI_GET_BITS(ieee_link_id_comb, 16, 8)
		#define WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID3(ieee_link_id_comb, value) WMI_SET_BITS(ieee_link_id_comb, 16, 8, value)

		#define WMI_MLO_IEEE_LINK_ID_COMB_GET_LINK_ID4(ieee_link_id_comb) WMI_GET_BITS(ieee_link_id_comb, 24, 8)
		#define WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID4(ieee_link_id_comb, value) WMI_SET_BITS(ieee_link_id_comb, 24, 8, value)


		typedef struct wmi_disallowed_mlo_mode_bitmap_param
		{
		/** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_disallowed_mlo_mode_bitmap_param */
		A_UINT32 tlv_header;
		/** disallowed_mode_bitmap:
		* Bitmap of MLO Modes like MLMR, eMLSR which are not allowed.
		* Refer to WMI_MLO_MODE_*
		* disallowed_mode_bitmap Meaning
		* ====================== =================
		* 0x0 No restriction
		* 0x1 MLMR is not allowed
		* 0x2 EMLSR is not allowed
		* 0x3 MLMR and EMLSR are not allowed
		*/
		A_UINT32 disallowed_mode_bitmap;

		/** ieee_link_id_comb:
		* Give combination of IEEE link IDs for which above disallowed_mode_bitmap
		* is applicable.
		* Each 8-bits in ieee_link_id_comb represents one link ID.
		* Use WMI_MLO_IEEE_LINK_ID_COMB_GET_LINK_ID* and _SET_LINK_ID* to get/set
		* link IDs in this field.
		*/
		A_UINT32 ieee_link_id_comb;


		/** Example:
		* Say there are 3 MLO links with ieee link IDs as 1,2 and 32.
		* Say host wants to disallow MLMR between links with IDs 1 and 2,
		* disallow eMLSR between links with IDs 1 and 32,
		* disallow MLMR and eMLSR for links with IDs 2 and 32.
		* There will be 3 TLVs of type wmi_disallowed_mlo_mode_bitmap_param
		* like below.
		*
		* wmi_disallowed_mlo_mode_bitmap_param[0]:
		* disallowed_mode_bitmap = 0x1,
		* ieee_link_id_comb = 0x00000201
		* WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID1(ieee_link_id_comb, 0x1)
		* WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID2(ieee_link_id_comb, 0x2)
		*
		* wmi_disallowed_mlo_mode_bitmap_param[1]
		* disallowed_mode_bitmap = 0x2,
		* ieee_link_id_comb = 0x00002001
		* WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID1(ieee_link_id_comb, 0x1)
		* WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID2(ieee_link_id_comb, 0x20)
		*
		* wmi_disallowed_mlo_mode_bitmap_param[2]
		* disallowed_mode_bitmap = 0x3,
		* ieee_link_id_comb = 0x00002002
		* WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID1(ieee_link_id_comb, 0x2)
		* WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID2(ieee_link_id_comb, 0x20)
		*/
		} wmi_disallowed_mlo_mode_bitmap_param;

		typedef enum {
		WMI_MLO_LINK_SET_ACTIVE_STATUS_SUCCESS = 0,
		WMI_MLO_LINK_SET_ACTIVE_STATUS_HOST_REJECT = 1,

fw/wmi_version.h

+1 −1

Original line number	Diff line number	Diff line
		@@ -37,7 +37,7 @@
		#define __WMI_VER_MINOR_ 0
		/** WMI revision number has to be incremented when there is a
		* change that may or may not break compatibility. */
		#define __WMI_REVISION_ 1415
		#define __WMI_REVISION_ 1416

		/** The Version Namespace should not be normally changed. Only
		* host and firmware of the same WMI namespace will work