Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d6a01661 authored by Jean-Christophe PLAGNIOL-VILLARD's avatar Jean-Christophe PLAGNIOL-VILLARD
Browse files

atmel/nand: add DT support 



Use a local copy of board informatin and fill with DT data.

Signed-off-by: default avatarJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: default avatarGrant Likely <grant.likely@secretlab.ca>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
parent 770d7c39

Documentation/devicetree/bindings/mtd/atmel-nand.txt

0 → 100644
+41 −0
Original line number Original line Diff line number Diff line 
Atmel NAND flash



Required properties:

- compatible : "atmel,at91rm9200-nand".

- reg : should specify localbus address and size used for the chip,

	and if availlable the ECC.

- atmel,nand-addr-offset : offset for the address latch.

- atmel,nand-cmd-offset : offset for the command latch.

- #address-cells, #size-cells : Must be present if the device has sub-nodes

  representing partitions.



- gpios : specifies the gpio pins to control the NAND device. detect is an

  optional gpio and may be set to 0 if not present.



Optional properties:

- nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default.

  Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",

  "soft_bch".

- nand-bus-width : 8 or 16 bus width if not present 8

- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false



Examples:

nand0: nand@40000000,0 {

	compatible = "atmel,at91rm9200-nand";

	#address-cells = <1>;

	#size-cells = <1>;

	reg = <0x40000000 0x10000000

	       0xffffe800 0x200

	      >;

	atmel,nand-addr-offset = <21>;

	atmel,nand-cmd-offset = <22>;

	nand-on-flash-bbt;

	nand-ecc-mode = "soft";

	gpios = <&pioC 13 0

		 &pioC 14 0

		 0

		>;

	partition@0 {

		...

	};

};

arch/arm/boot/dts/at91sam9g20.dtsi

+16 −0
Original line number Original line Diff line number Diff line
@@ -172,5 +172,21 @@ 
				status = "disabled";

				status = "disabled";

			};

			};

		};

		};



		nand0: nand@40000000 {

			compatible = "atmel,at91rm9200-nand";

			#address-cells = <1>;

			#size-cells = <1>;

			reg = <0x40000000 0x10000000

			       0xffffe800 0x200

			      >;

			atmel,nand-addr-offset = <21>;

			atmel,nand-cmd-offset = <22>;

			gpios = <&pioC 13 0

				 &pioC 14 0

				 0

				>;

			status = "disabled";

		};

	};

	};

};
 
};

arch/arm/boot/dts/at91sam9g45.dtsi

+16 −0
Original line number Original line Diff line number Diff line
@@ -180,5 +180,21 @@ 
				status = "disabled";

				status = "disabled";

			};

			};

		};

		};



		nand0: nand@40000000 {

			compatible = "atmel,at91rm9200-nand";

			#address-cells = <1>;

			#size-cells = <1>;

			reg = <0x40000000 0x10000000

			       0xffffe200 0x200

			      >;

			atmel,nand-addr-offset = <21>;

			atmel,nand-cmd-offset = <22>;

			gpios = <&pioC 8 0

				 &pioC 14 0

				 0

				>;

			status = "disabled";

		};

	};

	};

};
 
};

arch/arm/boot/dts/at91sam9m10g45ek.dts

+24 −1
Original line number Original line Diff line number Diff line
@@ -14,7 +14,7 @@ 
	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";

	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";





	chosen {

	chosen {

		bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2";

		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";

	};

	};





	memory@70000000 {

	memory@70000000 {
@@ -36,6 +36,29 @@ 
				status = "okay";

				status = "okay";

			};

			};

		};

		};



		nand0: nand@40000000 {

			nand-bus-width = <8>;

			nand-ecc-mode = "soft";

			nand-on-flash-bbt;

			status = "okay";



			boot@0 {

				label = "bootstrap/uboot/kernel";

				reg = <0x0 0x400000>;

			};



			rootfs@400000 {

				label = "rootfs";

				reg = <0x400000 0x3C00000>;

			};



			data@4000000 {

				label = "data";

				reg = <0x4000000 0xC000000>;

			};



		};

	};

	};





	leds {

	leds {

arch/arm/boot/dts/usb_a9g20.dts

+43 −1
Original line number Original line Diff line number Diff line
@@ -13,7 +13,7 @@ 
	compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";

	compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";





	chosen {

	chosen {

		bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data) root=/dev/mtdblock5 rw rootfstype=ubifs";

		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";

	};

	};





	memory@20000000 {

	memory@20000000 {
@@ -31,6 +31,48 @@ 
				status = "okay";

				status = "okay";

			};

			};

		};

		};



		nand0: nand@40000000 {

			nand-bus-width = <8>;

			nand-ecc-mode = "soft";

			nand-on-flash-bbt;

			status = "okay";



			at91bootstrap@0 {

				label = "at91bootstrap";

				reg = <0x0 0x20000>;

			};



			barebox@20000 {

				label = "barebox";

				reg = <0x20000 0x40000>;

			};



			bareboxenv@60000 {

				label = "bareboxenv";

				reg = <0x60000 0x20000>;

			};



			bareboxenv2@80000 {

				label = "bareboxenv2";

				reg = <0x80000 0x20000>;

			};



			kernel@a0000 {

				label = "kernel";

				reg = <0xa0000 0x400000>;

			};



			rootfs@4a0000 {

				label = "rootfs";

				reg = <0x4a0000 0x7800000>;

			};



			data@7ca0000 {

				label = "data";

				reg = <0x7ca0000 0x8360000>;

			};

		};

	};

	};





	leds {

	leds {