Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d641acef authored by qctecmdr's avatar qctecmdr Committed by Gerrit - the friendly Code Review server
Browse files

Merge "ARM: dts: msm: Enable ESD, DFPS, ULPS feature on lagoon"

parents 03cd53ba 7589dd77

qcom/dsi-panel-rm69299-visionox-fhd-plus-cmd.dtsi

0 → 100644
+64 −0
Original line number Diff line number Diff line 
&mdss_mdp {

	dsi_rm69299_visionox_amoled_cmd:

		qcom,mdss_dsi_rm69299_visionox_amoled_cmd {

		qcom,mdss-dsi-panel-name =

		"rm69299 amoled fhd+ cmd mode dsi visionox panel";

		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";

		qcom,dsi-ctrl-num = <0>;

		qcom,dsi-phy-num = <0>;



		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-h-sync-pulse = <0>;

		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-tx-eot-append;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-lp11-init;

		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

		qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;

		qcom,mdss-dsi-te-pin-select = <1>;

		qcom,mdss-dsi-wr-mem-start = <0x2c>;

		qcom,mdss-dsi-wr-mem-continue = <0x3c>;

		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-te-check-enable;

		qcom,mdss-dsi-te-using-te-pin;

		qcom,mdss-dsi-display-timings {

			timing@0 {

				qcom,mdss-dsi-panel-width = <1080>;

				qcom,mdss-dsi-panel-height = <2248>;

				qcom,mdss-dsi-h-front-porch = <26>;

				qcom,mdss-dsi-h-back-porch = <36>;

				qcom,mdss-dsi-h-pulse-width = <2>;

				qcom,mdss-dsi-h-sync-skew = <0>;

				qcom,mdss-dsi-v-back-porch = <4>;

				qcom,mdss-dsi-v-front-porch = <56>;

				qcom,mdss-dsi-v-pulse-width = <4>;

				qcom,mdss-dsi-panel-framerate = <60>;

				qcom,mdss-dsi-on-command = [

						39 01 00 00 00 00 02 FE 00

						39 01 00 00 00 00 02 C2 08

						39 01 00 00 00 00 02 35 00

						39 01 00 00 00 00 02 51 FF

						05 01 00 00 96 00 02 11 00

						05 01 00 00 32 00 02 29 00];

				qcom,mdss-dsi-off-command = [

						05 01 00 00 32 00 02 28 00

						05 01 00 00 96 00 02 10 00];

				qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

				qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

			};

		};

	};

};

qcom/lagoon-atp.dtsi

+11 −1
Original line number Diff line number Diff line
@@ -164,6 +164,15 @@ 
	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_rm69299_visionox_amoled_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <255>;

	qcom,platform-te-gpio = <&tlmm 23 0>;

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&sde_dsi {

	qcom,dsi-default-panel = <&dsi_rm69299_visionox_amoled_video>;

};
@@ -197,6 +206,7 @@ 
		synaptics,extend_report;

		synaptics,firmware-name = "synaptics_firmware.img";



		panel = <&dsi_rm69299_visionox_amoled_video>;

		panel = <&dsi_rm69299_visionox_amoled_video

			&dsi_rm69299_visionox_amoled_cmd>;

	};

};

qcom/lagoon-cdp.dtsi

+11 −1
Original line number Diff line number Diff line
@@ -247,6 +247,15 @@ 
	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_rm69299_visionox_amoled_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <255>;

	qcom,platform-te-gpio = <&tlmm 23 0>;

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&sde_dsi {

	qcom,dsi-default-panel = <&dsi_rm69299_visionox_amoled_video>;

};
@@ -280,6 +289,7 @@ 
		synaptics,extend_report;

		synaptics,firmware-name = "synaptics_firmware.img";



		panel = <&dsi_rm69299_visionox_amoled_video>;

		panel = <&dsi_rm69299_visionox_amoled_video

			&dsi_rm69299_visionox_amoled_cmd>;

	};

};

qcom/lagoon-mtp.dtsi

+11 −1
Original line number Diff line number Diff line
@@ -173,6 +173,15 @@ 
	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&dsi_rm69299_visionox_amoled_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <255>;

	qcom,platform-te-gpio = <&tlmm 23 0>;

	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;

};



&sde_dsi {

	qcom,dsi-default-panel = <&dsi_rm69299_visionox_amoled_video>;

};
@@ -206,6 +215,7 @@ 
		synaptics,extend_report;

		synaptics,firmware-name = "synaptics_firmware.img";



		panel = <&dsi_rm69299_visionox_amoled_video>;

		panel = <&dsi_rm69299_visionox_amoled_video

			&dsi_rm69299_visionox_amoled_cmd>;

	};

};

qcom/lagoon-pinctrl.dtsi

+2 −2
Original line number Diff line number Diff line
@@ -1117,7 +1117,7 @@ 
			sde_te_active: sde_te_active {

				mux {

					pins = "gpio23";

					function = "mdp_vsync";

					function = "MDP_VSYNC";

				};



				config {
@@ -1130,7 +1130,7 @@ 
			sde_te_suspend: sde_te_suspend {

				mux {

					pins = "gpio23";

					function = "mdp_vsync";

					function = "MDP_VSYNC";

				};



				config {