Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d5a2b34f authored by Tony Lindgren's avatar Tony Lindgren
Browse files

ARM: dts: Configure and fix the McSPI pins for 4430sdp 



The bootloader configures the pins, but has pull bits
set without pull enable bits. While this is harmless,
and won't do anything, it seems to cause confusion at
least for me every time looking at the pin configuration.
Fix it for DT based boot.

Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent e45879ec

arch/arm/boot/dts/omap4-sdp.dts

+12 −0
Original line number Original line Diff line number Diff line
@@ -223,6 +223,15 @@ 
		>;

		>;

	};

	};





	mcspi1_pins: pinmux_mcspi1_pins {

		pinctrl-single,pins = <

			0xf2 0x100	/*  mcspi1_clk.mcspi1_clk INPUT | MODE0 */

			0xf4 0x100	/*  mcspi1_somi.mcspi1_somi INPUT | MODE0 */

			0xf6 0x100	/*  mcspi1_simo.mcspi1_simo INPUT | MODE0 */

			0xf8 0x100	/*  mcspi1_cs0.mcspi1_cs0 INPUT | MODE0*/

		>;

	};



	dss_hdmi_pins: pinmux_dss_hdmi_pins {

	dss_hdmi_pins: pinmux_dss_hdmi_pins {

		pinctrl-single,pins = <

		pinctrl-single,pins = <

			0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */

			0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
@@ -358,6 +367,9 @@ 
};

};





&mcspi1 {

&mcspi1 {

	pinctrl-names = "default";

	pinctrl-0 = <&mcspi1_pins>;



	eth@0 {

	eth@0 {

		compatible = "ks8851";

		compatible = "ks8851";

		spi-max-frequency = <24000000>;

		spi-max-frequency = <24000000>;