Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d540b7cc authored by Maxime Ripard's avatar Maxime Ripard
Browse files

ARM: sun7i: bananapi: Convert to DT label based syntax 



In order to lessen the amount of duplication of the DT tree, ease the
new and follow the trend that prefers to use label based references
when overriding DTSI nodes, convert the board to this syntax

Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent ece44e41

arch/arm/boot/dts/sun7i-a20-bananapi.dts

+130 −132
Original line number Original line Diff line number Diff line
@@ -65,50 +65,102 @@ 
		serial2 = &uart7;

		serial2 = &uart7;

	};

	};





	soc@01c00000 {

	leds {

		spi0: spi@01c05000 {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-names = "default";

			pinctrl-0 = <&spi0_pins_a>;

		pinctrl-0 = <&led_pins_bananapi>;



		green {

			label = "bananapi:green:usr";

			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;

		};

	};



	reg_gmac_3v3: gmac-3v3 {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

		pinctrl-0 = <&gmac_power_pin_bananapi>;

		regulator-name = "gmac-3v3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		startup-delay-us = <100000>;

		enable-active-high;

		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;

	};

};



&ahci {

	status = "okay";

};



&ehci0 {

	status = "okay";

};



&ehci1 {

	status = "okay";

	status = "okay";

};

};





		mmc0: mmc@01c0f000 {

&gmac {

	pinctrl-names = "default";

	pinctrl-names = "default";

			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;

	pinctrl-0 = <&gmac_pins_rgmii_a>;

			vmmc-supply = <&reg_vcc3v3>;

	phy = <&phy1>;

			bus-width = <4>;

	phy-mode = "rgmii";

			cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */

	phy-supply = <&reg_gmac_3v3>;

			cd-inverted;

	status = "okay";

	status = "okay";



	phy1: ethernet-phy@1 {

		reg = <1>;

	};

};

};





		usbphy: phy@01c13400 {

&i2c0 {

			usb1_vbus-supply = <&reg_usb1_vbus>;

	pinctrl-names = "default";

			usb2_vbus-supply = <&reg_usb2_vbus>;

	pinctrl-0 = <&i2c0_pins_a>;

	status = "okay";

	status = "okay";



	axp209: pmic@34 {

		compatible = "x-powers,axp209";

		reg = <0x34>;

		interrupt-parent = <&nmi_intc>;

		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;



		interrupt-controller;

		#interrupt-cells = <1>;

	};

};

};





		ehci0: usb@01c14000 {

&i2c2 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_pins_a>;

	status = "okay";

	status = "okay";

};

};





		ohci0: usb@01c14400 {

&ir0 {

	pinctrl-names = "default";

	pinctrl-0 = <&ir0_pins_a>;

	status = "okay";

	status = "okay";

};

};





		ahci: sata@01c18000 {

&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */

	cd-inverted;

	status = "okay";

	status = "okay";

};

};





		ehci1: usb@01c1c000 {

&ohci0 {

	status = "okay";

	status = "okay";

};

};





		ohci1: usb@01c1c400 {

&ohci1 {

	status = "okay";

	status = "okay";

};

};





		pinctrl@01c20800 {

&pio {

	mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {

	mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {

		allwinner,pins = "PH10";

		allwinner,pins = "PH10";

		allwinner,function = "gpio_in";

		allwinner,function = "gpio_in";
@@ -131,94 +183,40 @@ 
	};

	};

};

};





		ir0: ir@01c21800 {

&reg_usb1_vbus {

			pinctrl-names = "default";

			pinctrl-0 = <&ir0_pins_a>;

	status = "okay";

	status = "okay";

};

};





		uart0: serial@01c28000 {

&reg_usb2_vbus {

			pinctrl-names = "default";

			pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

	status = "okay";

};

};





		uart3: serial@01c28c00 {

&spi0 {

	pinctrl-names = "default";

	pinctrl-names = "default";

			pinctrl-0 = <&uart3_pins_b>;

	pinctrl-0 = <&spi0_pins_a>;

			status = "okay";

		};



		uart7: serial@01c29c00 {

			pinctrl-names = "default";

			pinctrl-0 = <&uart7_pins_a>;

	status = "okay";

	status = "okay";

};

};





		i2c0: i2c@01c2ac00 {

&uart0 {

	pinctrl-names = "default";

	pinctrl-names = "default";

			pinctrl-0 = <&i2c0_pins_a>;

	pinctrl-0 = <&uart0_pins_a>;

			status = "okay";



			axp209: pmic@34 {

				compatible = "x-powers,axp209";

				reg = <0x34>;

				interrupt-parent = <&nmi_intc>;

				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;



				interrupt-controller;

				#interrupt-cells = <1>;

			};

		};



		i2c2: i2c@01c2b400 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c2_pins_a>;

	status = "okay";

	status = "okay";

};

};





		gmac: ethernet@01c50000 {

&uart3 {

	pinctrl-names = "default";

	pinctrl-names = "default";

			pinctrl-0 = <&gmac_pins_rgmii_a>;

	pinctrl-0 = <&uart3_pins_b>;

			phy = <&phy1>;

			phy-mode = "rgmii";

			phy-supply = <&reg_gmac_3v3>;

	status = "okay";

	status = "okay";



			phy1: ethernet-phy@1 {

				reg = <1>;

			};

		};

};

};





	leds {

&uart7 {

		compatible = "gpio-leds";

	pinctrl-names = "default";

	pinctrl-names = "default";

		pinctrl-0 = <&led_pins_bananapi>;

	pinctrl-0 = <&uart7_pins_a>;



		green {

			label = "bananapi:green:usr";

			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;

		};

	};



	reg_usb1_vbus: usb1-vbus {

	status = "okay";

	status = "okay";

};

};





	reg_usb2_vbus: usb2-vbus {

&usbphy {

	usb1_vbus-supply = <&reg_usb1_vbus>;

	usb2_vbus-supply = <&reg_usb2_vbus>;

	status = "okay";

	status = "okay";

};
 
};
 


	reg_gmac_3v3: gmac-3v3 {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

		pinctrl-0 = <&gmac_power_pin_bananapi>;

		regulator-name = "gmac-3v3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		startup-delay-us = <100000>;

		enable-active-high;

		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;

	};

};