[ETH]: docbook comments (d3e01f71) · Commits · e / devices / android_kernel_fairphone_FP4

net/ethernet/eth.c

+69 −31

Original line number	Diff line number	Diff line
		@@ -64,23 +64,24 @@

		__setup("ether=", netdev_boot_setup);

		/*
		* Create the Ethernet MAC header for an arbitrary protocol layer
		/**
		* eth_header - create the Ethernet header
		* @skb: buffer to alter
		* @dev: source device
		* @type: Ethernet type field
		* @daddr: destination address (NULL leave destination address)
		* @saddr: source address (NULL use device source address)
		* @len: packet length (<= skb->len)
		*
		*
		* saddr=NULL means use device source address
		* daddr=NULL means leave destination address (eg unresolved arp)
		* Set the protocol type. For a packet of type ETH_P_802_3 we put the length
		* in here instead. It is up to the 802.2 layer to carry protocol information.
		*/

		int eth_header(struct sk_buff skb, struct net_device dev, unsigned short type,
		void daddr, void saddr, unsigned len)
		{
		struct ethhdr eth = (struct ethhdr )skb_push(skb,ETH_HLEN);

		/*
		* Set the protocol type. For a packet of type ETH_P_802_3 we put the length
		* in here instead. It is up to the 802.2 layer to carry protocol information.
		*/

		if(type!=ETH_P_802_3)
		eth->h_proto = htons(type);
		else
		@@ -113,16 +114,16 @@ int eth_header(struct sk_buff skb, struct net_device dev, unsigned short type,
		return -ETH_HLEN;
		}


		/*
		* Rebuild the Ethernet MAC header. This is called after an ARP
		* (or in future other address resolution) has completed on this
		* sk_buff. We now let ARP fill in the other fields.
		/**
		* eth_rebuild_header- rebuild the Ethernet MAC header.
		* @skb: socket buffer to update
		*
		* This is called after an ARP or IPV6 ndisc it's resolution on this
		* sk_buff. We now let protocol (ARP) fill in the other fields.
		*
		* This routine CANNOT use cached dst->neigh!
		* Really, it is used only when dst->neigh is wrong.
		*/

		int eth_rebuild_header(struct sk_buff *skb)
		{
		struct ethhdr eth = (struct ethhdr )skb->data;
		@@ -147,12 +148,15 @@ int eth_rebuild_header(struct sk_buff *skb)
		}


		/*
		* Determine the packet's protocol ID. The rule here is that we
		/**
		* eth_type_trans - determine the packet's protocol ID.
		* @skb: received socket data
		* @dev: receiving network device
		*
		* The rule here is that we
		* assume 802.3 if the type field is short enough to be a length.
		* This is normal practice and works for any 'now in use' protocol.
		*/

		__be16 eth_type_trans(struct sk_buff skb, struct net_device dev)
		{
		struct ethhdr *eth;
		@@ -202,6 +206,11 @@ __be16 eth_type_trans(struct sk_buff skb, struct net_device dev)
		return htons(ETH_P_802_2);
		}

		/**
		* eth_header_parse - extract hardware address from packet
		* @skb: packet to extract header from
		* @haddr: destination buffer
		*/
		static int eth_header_parse(struct sk_buff skb, unsigned char haddr)
		{
		struct ethhdr *eth = eth_hdr(skb);
		@@ -209,6 +218,12 @@ static int eth_header_parse(struct sk_buff skb, unsigned char haddr)
		return ETH_ALEN;
		}

		/**
		* eth_header_cache - fill cache entry from neighbour
		* @neigh: source neighbour
		* @hh: destination cache entry
		* Create an Ethernet header template from the neighbour.
		*/
		int eth_header_cache(struct neighbour neigh, struct hh_cache hh)
		{
		unsigned short type = hh->hh_type;
		@@ -228,10 +243,14 @@ int eth_header_cache(struct neighbour neigh, struct hh_cache hh)
		return 0;
		}

		/*
		/**
		* eth_header_cache_update - update cache entry
		* @hh: destination cache entry
		* @dev: network device
		* @haddr: new hardware address
		*
		* Called by Address Resolution module to notify changes in address.
		*/

		void eth_header_cache_update(struct hh_cache hh, struct net_device dev, unsigned char * haddr)
		{
		memcpy(((u8*)hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)),
		@@ -240,6 +259,15 @@ void eth_header_cache_update(struct hh_cache hh, struct net_device dev, unsign

		EXPORT_SYMBOL(eth_type_trans);

		/**
		* eth_mac_addr - set new Ethernet hardware address
		* @dev: network device
		* @p: socket address
		* Change hardware address of device.
		*
		* This doesn't change hardware matching, so needs to be overridden
		* for most real devices.
		*/
		static int eth_mac_addr(struct net_device dev, void p)
		{
		struct sockaddr *addr=p;
		@@ -249,6 +277,14 @@ static int eth_mac_addr(struct net_device dev, void p)
		return 0;
		}

		/**
		* eth_change_mtu - set new MTU size
		* @dev: network device
		* @new_mtu: new Maximum Transfer Unit
		*
		* Allow changing MTU size. Needs to be overridden for devices
		* supporting jumbo frames.
		*/
		static int eth_change_mtu(struct net_device *dev, int new_mtu)
		{
		if (new_mtu < 68 \|\| new_mtu > ETH_DATA_LEN)
		@@ -257,8 +293,10 @@ static int eth_change_mtu(struct net_device *dev, int new_mtu)
		return 0;
		}

		/*
		* Fill in the fields of the device structure with ethernet-generic values.
		/**
		* ether_setup - setup Ethernet network device
		* @dev: network device
		* Fill in the fields of the device structure with Ethernet-generic values.
		*/
		void ether_setup(struct net_device *dev)
		{
		@@ -283,15 +321,15 @@ void ether_setup(struct net_device *dev)
		EXPORT_SYMBOL(ether_setup);

		/**
		* alloc_etherdev - Allocates and sets up an ethernet device
		* alloc_etherdev - Allocates and sets up an Ethernet device
		* @sizeof_priv: Size of additional driver-private structure to be allocated
		* for this ethernet device
		* for this Ethernet device
		*
		* Fill in the fields of the device structure with ethernet-generic
		* Fill in the fields of the device structure with Ethernet-generic
		* values. Basically does everything except registering the device.
		*
		* Constructs a new net device, complete with a private data area of
		* size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
		* size (sizeof_priv). A 32-byte (not bit) alignment is enforced for
		* this private data area.
		*/