Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d1929844 authored by Sayali Lokhande's avatar Sayali Lokhande
Browse files

phy: ufs: Update phy settings for bengal 



This change updates phy setting for bengal
as per latest 11nm LPP post-si settings.

Change-Id: I3368b48012ec0386261a71a44e188f4a1f239551
Signed-off-by: default avatarSayali Lokhande <sayalil@codeaurora.org>
parent bc91cb8c

drivers/phy/qualcomm/phy-qcom-ufs-qmp-v3-660.h

+7 −3
Original line number Diff line number Diff line
@@ -152,7 +152,9 @@ 
#define UFS_PHY_PHY_START			PHY_OFF(0x00)

#define UFS_PHY_POWER_DOWN_CONTROL		PHY_OFF(0x04)

#define UFS_PHY_TX_LARGE_AMP_DRV_LVL		PHY_OFF(0x34)

#define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL	PHY_OFF(0x38)

#define UFS_PHY_TX_SMALL_AMP_DRV_LVL		PHY_OFF(0x3C)

#define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL	PHY_OFF(0x40)

#define UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAP	PHY_OFF(0xCC)

#define UFS_PHY_LINECFG_DISABLE			PHY_OFF(0x138)

#define UFS_PHY_RX_SYM_RESYNC_CTRL		PHY_OFF(0x13C)
@@ -268,14 +270,16 @@ static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_3_1_1[] = { 
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),

	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),

	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_SVS_SO_GAIN, 0x04),

	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_SO_SATURATION_ENABLE, 0x4B),

	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_SO_SATURATION_ENABLE, 0x5B),

	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_INITVAL1, 0xFF),

	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),

	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL2, 0x6c),

	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_LARGE_AMP_DRV_LVL, 0x0A),

	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL2, 0x6D),

	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_LARGE_AMP_DRV_LVL, 0x0F),

	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_SMALL_AMP_DRV_LVL, 0x02),

	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28),

	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SYM_RESYNC_CTRL, 0x03),

	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL, 0x12),

	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL, 0x0F),

	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_MIN_HIBERN8_TIME, 0x9A), /* 8 us */

};