Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit cf7f98bc authored by Kavya Nunna's avatar Kavya Nunna Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Add pm6125 and pmi632 files for bengal 

Add charger, QG, GPIOs, DIV_CLK, flash and other PMIC
peripherals for bengal.

Change-Id: I630f7cbba5b871138c37b9cf6790a3a96e35c52c
parent 0de607c4

qcom/bengal.dtsi

+2 −0
Original line number Diff line number Diff line
@@ -1359,6 +1359,8 @@ 
#include "bengal-ion.dtsi"

#include "bengal-coresight.dtsi"

#include "bengal-bus.dtsi"

#include "pmi632.dtsi"

#include "pm6125.dtsi"



&gcc_camss_top_gdsc {

	status = "ok";

qcom/pm6125.dtsi

0 → 100644
+161 −0
Original line number Diff line number Diff line 
#include <dt-bindings/input/input.h>

#include <dt-bindings/input/qcom,qpnp-power-on.h>

#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/spmi/spmi.h>

#include <dt-bindings/iio/qcom,spmi-vadc.h>



&spmi_bus {

	qcom,pm6125@0 {

		compatible = "qcom,spmi-pmic";

		reg = <0x0 0x0>;

		#address-cells = <1>;

		#size-cells = <1>;



		pm6125_revid: qcom,revid@100 {

			compatible = "qcom,qpnp-revid";

			reg = <0x100 0x100>;

		};



		qcom,power-on@800 {

			compatible = "qcom,qpnp-power-on";

			reg = <0x800 0x100>;

			interrupts = <0x0 0x8 0x0 IRQ_TYPE_NONE>,

				     <0x0 0x8 0x1 IRQ_TYPE_NONE>;

			interrupt-names = "kpdpwr", "resin";

			qcom,pon-dbc-delay = <15625>;

			qcom,kpdpwr-sw-debounce;

			qcom,system-reset;

			qcom,store-hard-reset-reason;



			qcom,pon_1 {

				qcom,pon-type = <PON_POWER_ON_TYPE_KPDPWR>;

				qcom,pull-up = <1>;

				linux,code = <KEY_POWER>;

			};



			qcom,pon_2 {

				qcom,pon-type = <PON_POWER_ON_TYPE_RESIN>;

				qcom,pull-up = <1>;

				linux,code = <KEY_VOLUMEDOWN>;

			};

		};



		pm6125_vadc: vadc@3100 {

			compatible = "qcom,spmi-adc5";

			reg = <0x3100 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "eoc-int-en-set";

			qcom,adc-vdd-reference = <1875>;

			#io-channel-cells = <1>;

			io-channel-ranges;



			/* Channel nodes */

			ref_gnd {

				reg = <ADC_REF_GND>;

				label = "ref_gnd";

				qcom,pre-scaling = <1 1>;

			};



			vref_1p25 {

				reg = <ADC_1P25VREF>;

				label = "vref_1p25";

				qcom,pre-scaling = <1 1>;

			};



			die_temp {

				reg = <ADC_DIE_TEMP>;

				label = "die_temp";

				qcom,pre-scaling = <1 1>;

			};



			vph_pwr {

				reg = <ADC_VPH_PWR>;

				label = "vph_pwr";

				qcom,pre-scaling = <1 3>;

			};



			vcoin {

				reg = <ADC_VCOIN>;

				label = "vcoin";

				qcom,pre-scaling = <1 3>;

			};



			xo_therm {

				reg = <ADC_XO_THERM_PU2>;

				label = "xo_therm";

				qcom,ratiometric;

				qcom,hw-settle-time = <200>;

				qcom,pre-scaling = <1 1>;

			};

		};



		pm6125_adc_tm: adc_tm@3500 {

			compatible = "qcom,adc-tm5";

			reg = <0x3500 0x100>;

			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "thr-int-en";

			#address-cells = <1>;

			#size-cells = <0>;

			#thermal-sensor-cells = <1>;

		};



		pm6125_tz: qcom,temp-alarm@2400 {

			compatible = "qcom,spmi-temp-alarm";

			reg = <0x2400 0x100>;

			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;

			#thermal-sensor-cells = <0>;

			qcom,temperature-threshold-set = <1>;

		};



		pm6125_clkdiv: clock-controller@5b00 {

			compatible = "qcom,spmi-clkdiv";

			reg = <0x5b00 0x100>;

			#clock-cells = <1>;

			qcom,num-clkdivs = <1>;

			clock-output-names = "pm6125_div_clk1";

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;

			clock-names = "xo";

			assigned-clocks = <&pm6125_clkdiv 1>;

			assigned-clock-rates = <9600000>;

		};



		pm6125_gpios: pinctrl@c000 {

			compatible = "qcom,spmi-gpio";

			reg = <0xc000 0x900>;

			interrupts = <0x0 0xc0 0 IRQ_TYPE_NONE>,

					<0x0 0xc1 0 IRQ_TYPE_NONE>,

					<0x0 0xc2 0 IRQ_TYPE_NONE>,

					<0x0 0xc3 0 IRQ_TYPE_NONE>,

					<0x0 0xc4 0 IRQ_TYPE_NONE>,

					<0x0 0xc5 0 IRQ_TYPE_NONE>,

					<0x0 0xc6 0 IRQ_TYPE_NONE>,

					<0x0 0xc7 0 IRQ_TYPE_NONE>,

					<0x0 0xc8 0 IRQ_TYPE_NONE>;

			interrupt-names = "pm6125_gpio1", "pm6125_gpio2",

					"pm6125_gpio3", "pm6125_gpio4",

					"pm6125_gpio5", "pm6125_gpio6",

					"pm6125_gpio7", "pm6125_gpio8",

					"pm6125_gpio9";

			gpio-controller;

			#gpio-cells = <2>;

		};

	};



	qcom,pm6125@1 {

		compatible ="qcom,spmi-pmic";

		reg = <0x1 0x0>;

		#address-cells = <1>;

		#size-cells = <1>;



		pm6125_pwm: qcom,pwms@b300 {

			status = "disabled";

			compatible = "qcom,pwm-lpg";

			reg = <0xb300 0x100>;

			reg-names = "lpg-base";

			qcom,num-lpg-channels = <1>;

			#pwm-cells = <2>;

		};

	};

};

qcom/pmi632.dtsi

0 → 100644
+597 −0
Original line number Diff line number Diff line 
#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/spmi/spmi.h>

#include <dt-bindings/iio/qcom,spmi-vadc.h>



&spmi_bus {

	qcom,pmi632@2 {

		compatible = "qcom,spmi-pmic";

		reg = <0x2 0x0>;

		#address-cells = <1>;

		#size-cells = <1>;



		pmi632_revid: qcom,revid@100 {

			compatible = "qcom,qpnp-revid";

			reg = <0x100 0x100>;

		};



		pmi632_pon: qcom,power-on@800 {

			compatible = "qcom,qpnp-power-on";

			reg = <0x800 0x100>;

		};



		pmi632_vadc: vadc@3100 {

			compatible = "qcom,spmi-adc5";

			reg = <0x3100 0x100>, <0x3700 0x100>;

			reg-names = "adc5-usr-base", "adc5-cal-base";

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "eoc-int-en-set";

			qcom,adc-vdd-reference = <1875>;

			#io-channel-cells = <1>;

			io-channel-ranges;

			qcom,pmic-revid = <&pmi632_revid>;



			/* Channel nodes */

			ref_gnd {

				reg = <ADC_REF_GND>;

				label = "ref_gnd";

				qcom,pre-scaling = <1 1>;

			};



			vref_1p25 {

				reg = <ADC_1P25VREF>;

				label = "vref_1p25";

				qcom,pre-scaling = <1 1>;

			};



			die_temp {

				reg = <ADC_DIE_TEMP>;

				label = "die_temp";

				qcom,pre-scaling = <1 1>;

			};



			vph_pwr {

				reg = <ADC_VPH_PWR>;

				label = "vph_pwr";

				qcom,pre-scaling = <1 3>;

			};



			vbat_sns {

				reg = <ADC_VBAT_SNS>;

				label = "vbat_sns";

				qcom,pre-scaling = <1 3>;

			};



			usb_in_i_uv {

				reg = <ADC_USB_IN_I>;

				label = "usb_in_i_uv";

				qcom,pre-scaling = <1 1>;

			};



			usb_in_v_div_16 {

				reg = <ADC_USB_IN_V_16>;

				label = "usb_in_v_div_16";

				qcom,pre-scaling = <1 16>;

			};



			chg_temp {

				reg = <ADC_CHG_TEMP>;

				label = "chg_temp";

				qcom,pre-scaling = <1 1>;

			};



			bat_therm {

				reg = <ADC_BAT_THERM_PU2>;

				label = "bat_therm";

				qcom,ratiometric;

				qcom,hw-settle-time = <200>;

				qcom,pre-scaling = <1 1>;

			};



			bat_therm_30k {

				reg = <ADC_BAT_THERM_PU1>;

				label = "bat_therm_30k";

				qcom,ratiometric;

				qcom,hw-settle-time = <200>;

				qcom,pre-scaling = <1 1>;

			};



			bat_therm_400k {

				reg = <ADC_BAT_THERM_PU3>;

				label = "bat_therm_400k";

				qcom,ratiometric;

				qcom,hw-settle-time = <200>;

				qcom,pre-scaling = <1 1>;

			};



			bat_id {

				reg = <ADC_BAT_ID_PU2>;

				label = "bat_id";

				qcom,ratiometric;

				qcom,hw-settle-time = <200>;

				qcom,pre-scaling = <1 1>;

			};



			xo_therm {

				reg = <ADC_XO_THERM_PU2>;

				label = "xo_therm";

				qcom,ratiometric;

				qcom,hw-settle-time = <200>;

				qcom,pre-scaling = <1 1>;

			};



			v_i_int_ext {

				reg = <ADC_INT_EXT_ISENSE_VBAT_VDATA>;

				label = "v_i_int_vbat_vdata";

				qcom,pre-scaling = <1 1>;

			};



			v_i_parallel {

				reg = <ADC_PARALLEL_ISENSE_VBAT_VDATA>;

				label = "v_i_parallel_vbat_vdata";

				qcom,pre-scaling = <1 1>;

			};



		};



		pmi632_adc_tm: adc_tm@3500 {

			compatible = "qcom,adc-tm5";

			reg = <0x3500 0x100>;

			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "thr-int-en";

			#address-cells = <1>;

			#size-cells = <0>;

			#thermal-sensor-cells = <1>;

		};



		pmi632_tz: qcom,temp-alarm@2400 {

			compatible = "qcom,spmi-temp-alarm";

			reg = <0x2400 0x100>;

			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_RISING>;

			#thermal-sensor-cells = <0>;

			qcom,temperature-threshold-set = <1>;

		};



		pmi632_gpios: pinctrl@c000 {

			compatible = "qcom,spmi-gpio";

			reg = <0xc000 0x800>;

			interrupts = <0x2 0xc0 0 IRQ_TYPE_NONE>,

					<0x2 0xc1 0 IRQ_TYPE_NONE>,

					<0x2 0xc2 0 IRQ_TYPE_NONE>,

					<0x2 0xc3 0 IRQ_TYPE_NONE>,

					<0x2 0xc4 0 IRQ_TYPE_NONE>,

					<0x2 0xc5 0 IRQ_TYPE_NONE>,

					<0x2 0xc6 0 IRQ_TYPE_NONE>,

					<0x2 0xc7 0 IRQ_TYPE_NONE>;

			interrupt-names = "pmi632_gpio1", "pmi632_gpio2",

					"pmi632_gpio3", "pmi632_gpio4",

					"pmi632_gpio5", "pmi632_gpio6",

					"pmi632_gpio7", "pmi632_gpio8";

			gpio-controller;

			#gpio-cells = <2>;

		};



		pmi632_charger: qcom,qpnp-smb5 {

			compatible = "qcom,qpnp-smb5";

			#address-cells = <1>;

			#size-cells = <1>;

			#cooling-cells = <2>;



			qcom,pmic-revid = <&pmi632_revid>;

			io-channels = <&pmi632_vadc ADC_USB_IN_V_16>,

				      <&pmi632_vadc ADC_USB_IN_I>,

				      <&pmi632_vadc ADC_CHG_TEMP>,

				      <&pmi632_vadc ADC_DIE_TEMP>;

			io-channel-names = "usb_in_voltage",

					   "usb_in_current",

					   "chg_temp",

					   "die_temp";



			qcom,chgr@1000 {

				reg = <0x1000 0x100>;

				interrupts =

					<0x2 0x10 0x0 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x10 0x1 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x10 0x2 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x10 0x3 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x10 0x4 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x10 0x5 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x10 0x6 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x10 0x7 IRQ_TYPE_EDGE_RISING>;



				interrupt-names = "chgr-error",

						  "chg-state-change",

						  "step-chg-state-change",

						  "step-chg-soc-update-fail",

						  "step-chg-soc-update-req",

						  "fg-fvcal-qualified",

						  "vph-alarm",

						  "vph-drop-prechg";

			};



			qcom,dcdc@1100 {

				reg = <0x1100 0x100>;

				interrupts =

					<0x2 0x11 0x0 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x11 0x1 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x11 0x2 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x11 0x3 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x11 0x4 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x11 0x5 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x11 0x6 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x11 0x7 IRQ_TYPE_EDGE_BOTH>;



				interrupt-names = "otg-fail",

						  "otg-oc-disable-sw",

						  "otg-oc-hiccup",

						  "bsm-active",

						  "high-duty-cycle",

						  "input-current-limiting",

						  "concurrent-mode-disable",

						  "switcher-power-ok";

			};



			qcom,batif@1200 {

				reg = <0x1200 0x100>;

				interrupts =

					<0x2 0x12 0x0 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x12 0x1 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x12 0x3 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x12 0x4 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x12 0x5 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x12 0x6 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x12 0x7 IRQ_TYPE_EDGE_BOTH>;



				interrupt-names = "bat-temp",

						  "all-chnl-conv-done",

						  "bat-ov",

						  "bat-low",

						  "bat-therm-or-id-missing",

						  "bat-terminal-missing",

						  "buck-oc",

						  "vph-ov";

			};



			qcom,usb@1300 {

				reg = <0x1300 0x100>;

				interrupts =

					<0x2 0x13 0x0 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x13 0x1 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x13 0x2 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x13 0x3 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x13 0x5 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x13 0x7 IRQ_TYPE_EDGE_RISING>;



				interrupt-names = "usbin-collapse",

						  "usbin-vashdn",

						  "usbin-uv",

						  "usbin-ov",

						  "usbin-plugin",

						  "usbin-revi-change",

						  "usbin-src-change",

						  "usbin-icl-change";

			};



			qcom,typec@1500 {

				reg = <0x1500 0x100>;

				interrupts =

					<0x2 0x15 0x0 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x15 0x1 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x15 0x2 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x15 0x3 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x15 0x4 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x15 0x6 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x15 0x7 IRQ_TYPE_EDGE_RISING>;



				interrupt-names = "typec-or-rid-detect-change",

						  "typec-vpd-detect",

						  "typec-cc-state-change",

						  "typec-vconn-oc",

						  "typec-vbus-change",

						  "typec-attach-detach",

						  "typec-legacy-cable-detect",

						  "typec-try-snk-src-detect";

			};



			qcom,misc@1600 {

				reg = <0x1600 0x100>;

				interrupts =

					<0x2 0x16 0x0 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x16 0x2 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x16 0x3 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x16 0x4 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x16 0x5 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x16 0x6 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x16 0x7 IRQ_TYPE_EDGE_RISING>;



				interrupt-names = "wdog-snarl",

						  "wdog-bark",

						  "aicl-fail",

						  "aicl-done",

						  "smb-en",

						  "imp-trigger",

						  "temp-change",

						  "temp-change-smb";

			};



			qcom,schgm-flash@a600 {

				reg = <0xa600 0x100>;

				interrupts =

					<0x2 0xa6 0x2 IRQ_TYPE_EDGE_RISING>,

					<0x2 0xa6 0x5 IRQ_TYPE_EDGE_RISING>,

					<0x2 0xa6 0x6 IRQ_TYPE_EDGE_RISING>,

					<0x2 0xa6 0x7 IRQ_TYPE_EDGE_BOTH>;



				interrupt-names = "flash-state-change",

						"ilim1-s1",

						"ilim2-s2",

						"vreg-ok";

			};

		};



		pmi632_qg: qpnp,qg {

			compatible = "qcom,qpnp-qg";

			#address-cells = <1>;

			#size-cells = <1>;



			qcom,pmic-revid = <&pmi632_revid>;

			io-channels = <&pmi632_vadc ADC_BAT_THERM_PU2>,

				      <&pmi632_vadc ADC_BAT_ID_PU2>;

			io-channel-names = "batt-therm",

					   "batt-id";



			qcom,qgauge@4800 {

				status = "okay";

				reg = <0x4800 0x100>;

				interrupts =

					<0x2 0x48 0x0 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x48 0x1 IRQ_TYPE_EDGE_BOTH>,

					<0x2 0x48 0x2 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x48 0x3 IRQ_TYPE_EDGE_RISING>,

					<0x2 0x48 0x4 IRQ_TYPE_EDGE_RISING>;

				interrupt-names = "qg-batt-missing",

						  "qg-vbat-low",

						  "qg-vbat-empty",

						  "qg-fifo-done",

						  "qg-good-ocv";

			};



			qcom,qg-sdam@b100 {

				status = "okay";

				reg = <0xb100 0x100>;

			};

		};



		pmi632_pbs_client3: qcom,pbs@7400 {

			compatible = "qcom,qpnp-pbs";

			reg = <0x7400 0x100>;

		};



		pmi632_sdam7: qcom,sdam@b600 {

			compatible = "qcom,spmi-sdam";

			reg = <0xb600 0x100>;

		};



		bcl_sensor: bcl@3d00 {

			compatible = "qcom,bcl-v5";

			reg = <0x3d00 0x100>;

			interrupts = <0x2 0x3d 0x0 IRQ_TYPE_NONE>,

					<0x2 0x3d 0x1 IRQ_TYPE_NONE>,

					<0x2 0x3d 0x2 IRQ_TYPE_NONE>;

			interrupt-names = "bcl-lvl0",

						"bcl-lvl1",

						"bcl-lvl2";

			qcom,ibat-use-qg-adc-5a;

			#thermal-sensor-cells = <1>;

		};



		bcl_soc: bcl-soc {

			compatible = "qcom,msm-bcl-soc";

			#thermal-sensor-cells = <0>;

		};

	};



	pmi632_3: qcom,pmi632@3 {

		compatible ="qcom,spmi-pmic";

		reg = <0x3 0x0>;

		#address-cells = <1>;

		#size-cells = <1>;



		pmi632_vib: qcom,vibrator@5700 {

			compatible = "qcom,qpnp-vibrator-ldo";

			reg = <0x5700 0x100>;

			qcom,vib-ldo-volt-uv = <3000000>;

			qcom,disable-overdrive;

		};



		pmi632_pwm: qcom,pwms@b300 {

			compatible = "qcom,pwm-lpg";

			reg = <0xb300 0x500>;

			reg-names = "lpg-base";

			#pwm-cells = <2>;

			qcom,num-lpg-channels = <5>;

			nvmem-names = "ppg_sdam";

			nvmem = <&pmi632_sdam7>;

			qcom,pbs-client = <&pmi632_pbs_client3>;

			qcom,lut-sdam-base = <0x80>;

			qcom,lut-patterns = <0 0 0 14 28 42 56 70 84 100

						100 84 70 56 42 28 14 0 0 0>;

			lpg@1 {

				qcom,lpg-chan-id = <1>;

				qcom,ramp-step-ms = <200>;

				qcom,ramp-low-index = <0>;

				qcom,ramp-high-index = <19>;

				qcom,ramp-pattern-repeat;

				qcom,lpg-sdam-base = <0x48>;

			};



			lpg@2 {

				qcom,lpg-chan-id = <2>;

				qcom,ramp-step-ms = <200>;

				qcom,ramp-low-index = <0>;

				qcom,ramp-high-index = <19>;

				qcom,ramp-pattern-repeat;

				qcom,lpg-sdam-base = <0x56>;

			};



			lpg@3 {

				qcom,lpg-chan-id = <3>;

				qcom,ramp-step-ms = <200>;

				qcom,ramp-low-index = <0>;

				qcom,ramp-high-index = <19>;

				qcom,ramp-pattern-repeat;

				qcom,lpg-sdam-base = <0x64>;

			};

		};



		pmi632_rgb: qcom,leds@d000 {

			compatible = "qcom,tri-led";

			reg = <0xd000 0x100>;

			red {

				label = "red";

				pwms = <&pmi632_pwm 0 1000000>;

				led-sources = <0>;

				linux,default-trigger = "timer";

			};



			green {

				label = "green";

				pwms = <&pmi632_pwm 1 1000000>;

				led-sources = <1>;

				linux,default-trigger = "timer";

			};



			blue {

				label = "blue";

				pwms = <&pmi632_pwm 2 1000000>;

				led-sources = <2>;

				linux,default-trigger = "timer";

			};

		};



		pmi632_lcdb: qpnp-lcdb@ec00 {

			compatible = "qcom,qpnp-lcdb-regulator";

			#address-cells = <1>;

			#size-cells = <1>;

			reg = <0xec00 0x100>;

			interrupts = <0x3 0xec 0x1 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "sc-irq";



			qcom,pmic-revid = <&pmi632_revid>;

			qcom,voltage-step-ramp;



			lcdb_ldo_vreg: ldo {

				label = "ldo";

				regulator-name = "lcdb_ldo";

				regulator-min-microvolt = <4000000>;

				regulator-max-microvolt = <6000000>;

			};



			lcdb_ncp_vreg: ncp {

				label = "ncp";

				regulator-name = "lcdb_ncp";

				regulator-min-microvolt = <4000000>;

				regulator-max-microvolt = <6000000>;

			};



			lcdb_bst_vreg: bst {

				label = "bst";

				regulator-name = "lcdb_bst";

				regulator-min-microvolt = <4700000>;

				regulator-max-microvolt = <6275000>;

			};

		};



		flash_led: qcom,leds@d300 {

			compatible = "qcom,qpnp-flash-led-v2";

			status = "okay";

			reg = <0xd300 0x100>;

			label = "flash";

			interrupts = <0x3 0xd3 0x0 IRQ_TYPE_EDGE_RISING>,

				     <0x3 0xd3 0x3 IRQ_TYPE_EDGE_RISING>,

				     <0x3 0xd3 0x4 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "led-fault-irq",

					  "all-ramp-down-done-irq",

					  "all-ramp-up-done-irq";

			qcom,short-circuit-det;

			qcom,open-circuit-det;

			qcom,vph-droop-det;

			qcom,thermal-derate-en;

			qcom,thermal-derate-current = <200 500 1000>;

			qcom,isc-delay = <192>;

			qcom,pmic-revid = <&pmi632_revid>;



			pmi632_flash0: qcom,flash_0 {

				label = "flash";

				qcom,led-name = "led:flash_0";

				qcom,max-current = <1500>;

				qcom,default-led-trigger = "flash0_trigger";

				qcom,id = <0>;

				qcom,current-ma = <1000>;

				qcom,duration-ms = <1280>;

				qcom,ires-ua = <12500>;

				qcom,hdrm-voltage-mv = <400>;

				qcom,hdrm-vol-hi-lo-win-mv = <100>;

			};



			pmi632_flash1: qcom,flash_1 {

				label = "flash";

				qcom,led-name = "led:flash_1";

				qcom,max-current = <1500>;

				qcom,default-led-trigger = "flash1_trigger";

				qcom,id = <1>;

				qcom,current-ma = <1000>;

				qcom,duration-ms = <1280>;

				qcom,ires-ua = <12500>;

				qcom,hdrm-voltage-mv = <400>;

				qcom,hdrm-vol-hi-lo-win-mv = <100>;

			};



			pmi632_torch0: qcom,torch_0 {

				label = "torch";

				qcom,led-name = "led:torch_0";

				qcom,max-current = <500>;

				qcom,default-led-trigger = "torch0_trigger";

				qcom,id = <0>;

				qcom,current-ma = <300>;

				qcom,ires-ua = <12500>;

				qcom,hdrm-voltage-mv = <400>;

				qcom,hdrm-vol-hi-lo-win-mv = <100>;

			};



			pmi632_torch1: qcom,torch_1 {

				label = "torch";

				qcom,led-name = "led:torch_1";

				qcom,max-current = <500>;

				qcom,default-led-trigger = "torch1_trigger";

				qcom,id = <1>;

				qcom,current-ma = <300>;

				qcom,ires-ua = <12500>;

				qcom,hdrm-voltage-mv = <400>;

				qcom,hdrm-vol-hi-lo-win-mv = <100>;

			};



			pmi632_switch0: qcom,led_switch_0 {

				label = "switch";

				qcom,led-name = "led:switch_0";

				qcom,led-mask = <3>;

				qcom,default-led-trigger = "switch0_trigger";

			};



			pmi632_switch1: qcom,led_switch_1 {

				label = "switch";

				qcom,led-name = "led:switch_1";

				qcom,led-mask = <2>;

				qcom,default-led-trigger = "switch1_trigger";

			};



		};



	};

};