Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit cb01a231 authored by Jean Delvare's avatar Jean Delvare Committed by Mark M. Hoffman
Browse files

hwmon: (adm1026) Whitespace cleanups 



Whitespace cleanups only:
* Trim trailing whitespace.
* Use tabs for indentation and alignment.
* Add missing space after commas.
* Remove extra spaces.

No functional change, binary is identical before and after this patch.

Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Signed-off-by: default avatarMark M. Hoffman <mhoffman@lightlink.com>
parent a9273cb8

drivers/hwmon/adm1026.c

+227 −224
Original line number Diff line number Diff line
@@ -75,14 +75,17 @@ MODULE_PARM_DESC(gpio_fan,"List of GPIO pins (0-7) to program as fan tachs"); 
#define CFG1_DAC_AFC		0x20

#define CFG1_PWM_AFC		0x40

#define CFG1_RESET		0x80



#define ADM1026_REG_CONFIG2	0x01

/* CONFIG2 controls FAN0/GPIO0 through FAN7/GPIO7 */



#define ADM1026_REG_CONFIG3	0x07

#define CFG3_GPIO16_ENABLE	0x01

#define CFG3_CI_CLEAR		0x02

#define CFG3_VREF_250		0x04

#define CFG3_GPIO16_DIR		0x40

#define CFG3_GPIO16_POL		0x80



#define ADM1026_REG_E2CONFIG	0x13

#define E2CFG_READ		0x01

#define E2CFG_WRITE		0x02
@@ -201,10 +204,10 @@ static int adm1026_scaling[] = { /* .001 Volts */ 
 *   and we assume a 2 pulse-per-rev fan tach signal

 *      22500 kHz * 60 (sec/min) * 2 (pulse) / 2 (pulse/rev) == 1350000

 */

#define FAN_TO_REG(val,div)  ((val)<=0 ? 0xff : SENSORS_LIMIT(1350000/((val)*\

	(div)),1,254)) 

#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==0xff ? 0 : 1350000/((val)*\

	(div)))

#define FAN_TO_REG(val, div)  ((val) <= 0 ? 0xff : \

				SENSORS_LIMIT(1350000/((val)*(div)), 1, 254))

#define FAN_FROM_REG(val, div) ((val) == 0 ? -1:(val) == 0xff ? 0 : \

				1350000/((val)*(div)))

#define DIV_FROM_REG(val) (1<<(val))

#define DIV_TO_REG(val) ((val) >= 8 ? 3 : (val) >= 4 ? 2 : (val) >= 2 ? 1 : 0)
@@ -1114,9 +1117,9 @@ static ssize_t set_temp_auto_point1_temp(struct device *dev, 
}



#define temp_auto_point(offset)						\

static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp, S_IRUGO | S_IWUSR,	\

		show_temp_auto_point1_temp, set_temp_auto_point1_temp, 		\

		offset - 1);							\

static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp,		\

		S_IRUGO | S_IWUSR, show_temp_auto_point1_temp,		\

		set_temp_auto_point1_temp, offset - 1);			\

static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp_hyst, S_IRUGO,\

		show_temp_auto_point1_temp_hyst, NULL, offset - 1);	\

static SENSOR_DEVICE_ATTR(temp##offset##_auto_point2_temp, S_IRUGO,	\