Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit c9aeb249 authored by Felipe Balbi's avatar Felipe Balbi Committed by Dmitry Torokhov
Browse files

Input: ti_am335x_tsc - fix spelling mistake in TSC/ADC DT binding 



There was a spelling mistake on TSC/ADC binding where "coordinate" was
spelled as "coordiante".

We can't simply fix the error due to DT being an ABI, the approach taken
was to first use correct spelling and if that fails, fall back to
miss-spelled version.

It's unfortunate that has creeped into the tree.

Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent a0137817

Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt

+1 −1
Original line number Diff line number Diff line
@@ -6,7 +6,7 @@ Required properties: 
	ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen

		  support on the platform.

	ti,x-plate-resistance: X plate resistance

	ti,coordiante-readouts: The sequencer supports a total of 16

	ti,coordinate-readouts: The sequencer supports a total of 16

				programmable steps each step is used to

				read a single coordinate. A single

                                readout is enough but multiple reads can

arch/arm/boot/dts/am335x-evm.dts

+1 −1
Original line number Diff line number Diff line
@@ -509,7 +509,7 @@ 
	tsc {

		ti,wires = <4>;

		ti,x-plate-resistance = <200>;

		ti,coordiante-readouts = <5>;

		ti,coordinate-readouts = <5>;

		ti,wire-config = <0x00 0x11 0x22 0x33>;

	};

drivers/input/touchscreen/ti_am335x_tsc.c

+8 −1
Original line number Diff line number Diff line
@@ -348,6 +348,13 @@ static int titsc_parse_dt(struct platform_device *pdev, 
	if (err < 0)

		return err;



	/*

	 * Try with the new binding first. If it fails, try again with

	 * bogus, miss-spelled version.

	 */

	err = of_property_read_u32(node, "ti,coordinate-readouts",

			&ts_dev->coordinate_readouts);

	if (err < 0)

		err = of_property_read_u32(node, "ti,coordiante-readouts",

				&ts_dev->coordinate_readouts);

	if (err < 0)