diff --git a/.gitignore b/.gitignore index 6c119eab5d46921575fe606e9fe362ab5190791e..f6050b88e95b5b59e2c08dbef865d92049956e58 100644 --- a/.gitignore +++ b/.gitignore @@ -55,6 +55,11 @@ modules.builtin /System.map /Module.markers +# +# RPM spec file (make rpm-pkg) +# +/*.spec + # # Debian directory (make deb-pkg) # diff --git a/.mailmap b/.mailmap index c021f29779a7a1cce57d5c6aa36ee271a745e47a..1469ff0d3f4d55dde07c676e4c4fc29f432d20f3 100644 --- a/.mailmap +++ b/.mailmap @@ -73,6 +73,8 @@ James E Wilson James Hogan James Hogan James Ketrenos +Jason Gunthorpe +Jason Gunthorpe Javi Merino Jean Tourrilhes diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus index 5d0125f7bcaf145088359bed69a2ba2cce07fa97..d4077cc60d55ddc6b9b905e6d60dff3b5fd447aa 100644 --- a/Documentation/ABI/stable/sysfs-bus-vmbus +++ b/Documentation/ABI/stable/sysfs-bus-vmbus @@ -41,3 +41,73 @@ KernelVersion: 4.5 Contact: K. Y. Srinivasan Description: The 16 bit vendor ID of the device Users: tools/hv/lsvmbus and user level RDMA libraries + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: VCPU (sub)channel is affinitized to +Users: tools/hv/lsvmbus and other debuggig tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: VCPU (sub)channel is affinitized to +Users: tools/hv/lsvmbus and other debuggig tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/in_mask +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Inbound channel signaling state +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/latency +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Channel signaling latency +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/out_mask +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Outbound channel signaling state +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/pending +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Channel interrupt pending state +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/read_avail +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Bytes availabble to read +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/write_avail +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Bytes availabble to write +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/events +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Number of times we have signaled the host +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/interrupts +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Number of times we have taken an interrupt (incoming) +Users: Debugging tools diff --git a/Documentation/ABI/testing/dell-smbios-wmi b/Documentation/ABI/testing/dell-smbios-wmi new file mode 100644 index 0000000000000000000000000000000000000000..fc919ce16008d99c74761406a9351dc275ea0316 --- /dev/null +++ b/Documentation/ABI/testing/dell-smbios-wmi @@ -0,0 +1,41 @@ +What: /dev/wmi/dell-smbios +Date: November 2017 +KernelVersion: 4.15 +Contact: "Mario Limonciello" +Description: + Perform SMBIOS calls on supported Dell machines. + through the Dell ACPI-WMI interface. + + IOCTL's and buffer formats are defined in: + + + 1) To perform an SMBIOS call from userspace, you'll need to + first determine the minimum size of the calling interface + buffer for your machine. + Platforms that contain larger buffers can return larger + objects from the system firmware. + Commonly this size is either 4k or 32k. + + To determine the size of the buffer read() a u64 dword from + the WMI character device /dev/wmi/dell-smbios. + + 2) After you've determined the minimum size of the calling + interface buffer, you can allocate a structure that represents + the structure documented above. + + 3) In the 'length' object store the size of the buffer you + determined above and allocated. + + 4) In this buffer object, prepare as necessary for the SMBIOS + call you're interested in. Typically SMBIOS buffers have + "class", "select", and "input" defined to values that coincide + with the data you are interested in. + Documenting class/select/input values is outside of the scope + of this documentation. Check with the libsmbios project for + further documentation on these values. + + 6) Run the call by using ioctl() as described in the header. + + 7) The output will be returned in the buffer object. + + 8) Be sure to free up your allocated object. diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index 392bef5bd3996f71e5d73f934e701f9396afbf71..93798c02e28b28c171c0d00bedd1444c3553ed64 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -110,3 +110,51 @@ Description: When new NVM image is written to the non-active NVM is directly the status value from the DMA configuration based mailbox before the device is power cycled. Writing 0 here clears the status. + +What: /sys/bus/thunderbolt/devices/./key +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains name of the property directory the XDomain + service exposes. This entry describes the protocol in + question. Following directories are already reserved by + the Apple XDomain specification: + + network: IP/ethernet over Thunderbolt + targetdm: Target disk mode protocol over Thunderbolt + extdisp: External display mode protocol over Thunderbolt + +What: /sys/bus/thunderbolt/devices/./modalias +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: Stores the same MODALIAS value emitted by uevent for + the XDomain service. Format: tbtsvc:kSpNvNrN + +What: /sys/bus/thunderbolt/devices/./prtcid +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains XDomain protocol identifier the XDomain + service supports. + +What: /sys/bus/thunderbolt/devices/./prtcvers +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains XDomain protocol version the XDomain + service supports. + +What: /sys/bus/thunderbolt/devices/./prtcrevs +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains XDomain software version the XDomain + service supports. + +What: /sys/bus/thunderbolt/devices/./prtcstns +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains XDomain service specific settings as + bitmask. Format: %x diff --git a/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 new file mode 100644 index 0000000000000000000000000000000000000000..d301e7017afe164cf9140252f0168ee23007d197 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 @@ -0,0 +1,21 @@ +What: /sys/bus/w1/devices/19-/speed +Date: Sep 2017 +KernelVersion: 4.14 +Contact: Jan Kandziora +Description: When written, this file sets the I2C speed on the connected + DS28E17 chip. When read, it reads the current setting from + the DS28E17 chip. + Valid values: 100, 400, 900 [kBaud]. + Default 100, can be set by w1_ds28e17.speed= module parameter. +Users: w1_ds28e17 driver + +What: /sys/bus/w1/devices/19-/stretch +Date: Sep 2017 +KernelVersion: 4.14 +Contact: Jan Kandziora +Description: When written, this file sets the multiplier used to calculate + the busy timeout for I2C operations on the connected DS28E17 + chip. When read, returns the current setting. + Valid values: 1 to 9. + Default 1, can be set by w1_ds28e17.stretch= module parameter. +Users: w1_ds28e17 driver diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 11b7f4ebea7c4b6a04d2ce3894ff1a8d9907e60a..a7799c2fca2855eced4740cb6a82e5f26a448287 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -51,6 +51,18 @@ Description: Controls the dirty page count condition for the in-place-update policies. +What: /sys/fs/f2fs//min_hot_blocks +Date: March 2017 +Contact: "Jaegeuk Kim" +Description: + Controls the dirty page count condition for redefining hot data. + +What: /sys/fs/f2fs//min_ssr_sections +Date: October 2017 +Contact: "Chao Yu" +Description: + Controls the fee section threshold to trigger SSR allocation. + What: /sys/fs/f2fs//max_small_discards Date: November 2013 Contact: "Jaegeuk Kim" @@ -102,6 +114,12 @@ Contact: "Jaegeuk Kim" Description: Controls the idle timing. +What: /sys/fs/f2fs//iostat_enable +Date: August 2017 +Contact: "Chao Yu" +Description: + Controls to enable/disable IO stat. + What: /sys/fs/f2fs//ra_nid_pages Date: October 2015 Contact: "Chao Yu" @@ -122,6 +140,12 @@ Contact: "Shuoran Liu" Description: Shows total written kbytes issued to disk. +What: /sys/fs/f2fs//feature +Date: July 2017 +Contact: "Jaegeuk Kim" +Description: + Shows all enabled features in current device. + What: /sys/fs/f2fs//inject_rate Date: May 2016 Contact: "Sheng Yong" @@ -138,7 +162,18 @@ What: /sys/fs/f2fs//reserved_blocks Date: June 2017 Contact: "Chao Yu" Description: - Controls current reserved blocks in system. + Controls target reserved blocks in system, the threshold + is soft, it could exceed current available user space. + +What: /sys/fs/f2fs//current_reserved_blocks +Date: October 2017 +Contact: "Yunlong Song" +Contact: "Chao Yu" +Description: + Shows current reserved blocks in system, it may be temporarily + smaller than target_reserved_blocks, but will gradually + increase to target_reserved_blocks when more free blocks are + freed by user later. What: /sys/fs/f2fs//gc_urgent Date: August 2017 diff --git a/Documentation/ABI/testing/sysfs-platform-dell-smbios b/Documentation/ABI/testing/sysfs-platform-dell-smbios new file mode 100644 index 0000000000000000000000000000000000000000..205d3b6361e0db9c3c653f56928c6d8609ee000d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-dell-smbios @@ -0,0 +1,21 @@ +What: /sys/devices/platform//tokens/* +Date: November 2017 +KernelVersion: 4.15 +Contact: "Mario Limonciello" +Description: + A read-only description of Dell platform tokens + available on the machine. + + Each token attribute is available as a pair of + sysfs attributes readable by a process with + CAP_SYS_ADMIN. + + For example the token ID "5" would be available + as the following attributes: + + 0005_location + 0005_value + + Tokens will vary from machine to machine, and + only tokens available on that machine will be + displayed. diff --git a/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt b/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt new file mode 100644 index 0000000000000000000000000000000000000000..8af65059d51907de713066d243e73848346bf0e0 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt @@ -0,0 +1,11 @@ +What: /sys/devices/platform//force_power +Date: September 2017 +KernelVersion: 4.15 +Contact: "Mario Limonciello" +Description: + Modify the platform force power state, influencing + Thunderbolt controllers to turn on or off when no + devices are connected (write-only) + There are two available states: + * 0 -> Force power disabled + * 1 -> Force power enabled diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt index aa77a25a09400d91bbc45cf5f20152965c5b309a..5ef1047e2e6635b4cf060fa2f927820d917f5dc4 100644 --- a/Documentation/IPMI.txt +++ b/Documentation/IPMI.txt @@ -81,7 +81,9 @@ If you want the driver to put an event into the event log on a panic, enable the 'Generate a panic event to all BMCs on a panic' option. If you want the whole panic string put into the event log using OEM events, enable the 'Generate OEM events containing the panic string' -option. +option. You can also enable these dynamically by setting the module +parameter named "panic_op" in the ipmi_msghandler module to "event" +or "string". Setting that parameter to "none" disables this function. Basic Design ------------ diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst index 12278a926370a136e978feb31c94fa8763e9cdea..fdf72429f8019cd68ab8e7557cdb4c7376e50176 100644 --- a/Documentation/admin-guide/dynamic-debug-howto.rst +++ b/Documentation/admin-guide/dynamic-debug-howto.rst @@ -18,7 +18,7 @@ shortcut for ``print_hex_dump(KERN_DEBUG)``. For ``print_hex_dump_debug()``/``print_hex_dump_bytes()``, format string is its ``prefix_str`` argument, if it is constant string; or ``hexdump`` -in case ``prefix_str`` is build dynamically. +in case ``prefix_str`` is built dynamically. Dynamic debug has even more useful features: @@ -197,8 +197,8 @@ line line number matches the callsite line number exactly. A range of line numbers matches any callsite between the first and last line number inclusive. An empty first number means - the first line in the file, an empty line number means the - last number in the file. Examples:: + the first line in the file, an empty last line number means the + last line number in the file. Examples:: line 1603 // exactly line 1603 line 1600-1605 // the six lines from line 1600 to line 1605 diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index b74e13312fdc291d55ac29b137cc8df4ee608b5e..e49311d5350496b1db6e106634da7a09b58fc4a3 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -857,7 +857,7 @@ The filter can be disabled or changed to another driver later using sysfs. - drm_kms_helper.edid_firmware=[:][,[:]] + drm.edid_firmware=[:][,[:]] Broken monitors, graphic adapters, KVMs and EDIDless panels may send no or incorrect EDID data sets. This parameter allows to specify an EDID data sets @@ -1864,13 +1864,6 @@ Built with CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y, the default is off. - kmemcheck= [X86] Boot-time kmemcheck enable/disable/one-shot mode - Valid arguments: 0, 1, 2 - kmemcheck=0 (disabled) - kmemcheck=1 (enabled) - kmemcheck=2 (one-shot mode) - Default: 2 (one-shot mode) - kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs. Default is 0 (don't ignore, but inject #GP) @@ -1897,6 +1890,10 @@ [KVM,ARM] Trap guest accesses to GICv3 common system registers + kvm-arm.vgic_v4_enable= + [KVM,ARM] Allow use of GICv4 for direct injection of + LPIs. + kvm-intel.ept= [KVM,Intel] Disable extended page tables (virtualized MMU) support on capable Intel chips. Default is 1 (enabled) @@ -2711,6 +2708,8 @@ steal time is computed, but won't influence scheduler behaviour + nopti [X86-64] Disable kernel page table isolation + nolapic [X86-32,APIC] Do not enable or use the local APIC. nolapic_timer [X86-32,APIC] Do not use the local APIC timer. @@ -3211,6 +3210,10 @@ allowed (eg kernel_enable_fpu()/kernel_disable_fpu()). There is some performance impact when enabling this. + ppc_tm= [PPC] + Format: {"off"} + Disable Hardware Transactional Memory + print-fatal-signals= [KNL] debug: print fatal signals @@ -3249,13 +3252,15 @@ instead using the legacy FADT method profile= [KNL] Enable kernel profiling via /proc/profile - Format: [schedule,] + Format: [,] + Param: : "schedule", "sleep", or "kvm" + [defaults to kernel profiling] Param: "schedule" - profile schedule points. - Param: - step/bucket size as a power of 2 for - statistical time based profiling. Param: "sleep" - profile D-state sleeping (millisecs). Requires CONFIG_SCHEDSTATS Param: "kvm" - profile VM exits. + Param: - step/bucket size as a power of 2 for + statistical time based profiling. prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk before loading. @@ -3279,6 +3284,12 @@ pt. [PARIDE] See Documentation/blockdev/paride.txt. + pti= [X86_64] + Control user/kernel address space isolation: + on - enable + off - disable + auto - default setting + pty.legacy_count= [KNL] Number of legacy pty's. Overwrites compiled-in default number. diff --git a/Documentation/admin-guide/thunderbolt.rst b/Documentation/admin-guide/thunderbolt.rst index 6a4cd1f159ca7fef15f2fb59ed807a2c9946b439..de50a8561774249351515662404e2a1f8328aba6 100644 --- a/Documentation/admin-guide/thunderbolt.rst +++ b/Documentation/admin-guide/thunderbolt.rst @@ -197,3 +197,42 @@ information is missing. To recover from this mode, one needs to flash a valid NVM image to the host host controller in the same way it is done in the previous chapter. + +Networking over Thunderbolt cable +--------------------------------- +Thunderbolt technology allows software communication across two hosts +connected by a Thunderbolt cable. + +It is possible to tunnel any kind of traffic over Thunderbolt link but +currently we only support Apple ThunderboltIP protocol. + +If the other host is running Windows or macOS only thing you need to +do is to connect Thunderbolt cable between the two hosts, the +``thunderbolt-net`` is loaded automatically. If the other host is also +Linux you should load ``thunderbolt-net`` manually on one host (it does +not matter which one):: + + # modprobe thunderbolt-net + +This triggers module load on the other host automatically. If the driver +is built-in to the kernel image, there is no need to do anything. + +The driver will create one virtual ethernet interface per Thunderbolt +port which are named like ``thunderbolt0`` and so on. From this point +you can either use standard userspace tools like ``ifconfig`` to +configure the interface or let your GUI to handle it automatically. + +Forcing power +------------- +Many OEMs include a method that can be used to force the power of a +thunderbolt controller to an "On" state even if nothing is connected. +If supported by your machine this will be exposed by the WMI bus with +a sysfs attribute called "force_power". + +For example the intel-wmi-thunderbolt driver exposes this attribute in: + /sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power + + To force the power to on, write 1 to this attribute file. + To disable force power, write 0 to this attribute file. + +Note: it's currently not possible to query the force power state of a platform. diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README index d7b1f016bd62bb7e06b97e9345d1eb8ac7df1723..f8efc21998bfaded6d534e54074c4d985fc29ea4 100644 --- a/Documentation/arm/sunxi/README +++ b/Documentation/arm/sunxi/README @@ -33,6 +33,11 @@ SunXi family - Next Thing Co GR8 (sun5i) + * Single ARM Cortex-A7 based SoCs + - Allwinner V3s (sun8i) + + Datasheet + http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf + * Dual ARM Cortex-A7 based SoCs - Allwinner A20 (sun7i) + User Manual @@ -71,9 +76,11 @@ SunXi family + Datasheet http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf - - Allwinner V3s (sun8i) + - Allwinner R40 (sun8i) + Datasheet - http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf + https://github.com/tinalinux/docs/raw/r40-v1.y/R40_Datasheet_V1.0.pdf + + User Manual + https://github.com/tinalinux/docs/raw/r40-v1.y/Allwinner_R40_User_Manual_V1.0.pdf * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs - Allwinner A80 diff --git a/Documentation/arm64/cpu-feature-registers.txt b/Documentation/arm64/cpu-feature-registers.txt index dad411d635d88c09c6965f506e9ff27b5cfbc38b..bd9b3faab2c48551b28a90900b93ee13531956ac 100644 --- a/Documentation/arm64/cpu-feature-registers.txt +++ b/Documentation/arm64/cpu-feature-registers.txt @@ -110,10 +110,20 @@ infrastructure: x--------------------------------------------------x | Name | bits | visible | |--------------------------------------------------| - | RES0 | [63-32] | n | + | RES0 | [63-48] | n | + |--------------------------------------------------| + | DP | [47-44] | y | + |--------------------------------------------------| + | SM4 | [43-40] | y | + |--------------------------------------------------| + | SM3 | [39-36] | y | + |--------------------------------------------------| + | SHA3 | [35-32] | y | |--------------------------------------------------| | RDM | [31-28] | y | |--------------------------------------------------| + | RES0 | [27-24] | n | + |--------------------------------------------------| | ATOMICS | [23-20] | y | |--------------------------------------------------| | CRC32 | [19-16] | y | @@ -132,7 +142,11 @@ infrastructure: x--------------------------------------------------x | Name | bits | visible | |--------------------------------------------------| - | RES0 | [63-28] | n | + | RES0 | [63-36] | n | + |--------------------------------------------------| + | SVE | [35-32] | y | + |--------------------------------------------------| + | RES0 | [31-28] | n | |--------------------------------------------------| | GIC | [27-24] | n | |--------------------------------------------------| diff --git a/Documentation/arm64/elf_hwcaps.txt b/Documentation/arm64/elf_hwcaps.txt new file mode 100644 index 0000000000000000000000000000000000000000..89edba12a9e018762f43923c4982fe41840d1657 --- /dev/null +++ b/Documentation/arm64/elf_hwcaps.txt @@ -0,0 +1,160 @@ +ARM64 ELF hwcaps +================ + +This document describes the usage and semantics of the arm64 ELF hwcaps. + + +1. Introduction +--------------- + +Some hardware or software features are only available on some CPU +implementations, and/or with certain kernel configurations, but have no +architected discovery mechanism available to userspace code at EL0. The +kernel exposes the presence of these features to userspace through a set +of flags called hwcaps, exposed in the auxilliary vector. + +Userspace software can test for features by acquiring the AT_HWCAP entry +of the auxilliary vector, and testing whether the relevant flags are +set, e.g. + +bool floating_point_is_present(void) +{ + unsigned long hwcaps = getauxval(AT_HWCAP); + if (hwcaps & HWCAP_FP) + return true; + + return false; +} + +Where software relies on a feature described by a hwcap, it should check +the relevant hwcap flag to verify that the feature is present before +attempting to make use of the feature. + +Features cannot be probed reliably through other means. When a feature +is not available, attempting to use it may result in unpredictable +behaviour, and is not guaranteed to result in any reliable indication +that the feature is unavailable, such as a SIGILL. + + +2. Interpretation of hwcaps +--------------------------- + +The majority of hwcaps are intended to indicate the presence of features +which are described by architected ID registers inaccessible to +userspace code at EL0. These hwcaps are defined in terms of ID register +fields, and should be interpreted with reference to the definition of +these fields in the ARM Architecture Reference Manual (ARM ARM). + +Such hwcaps are described below in the form: + + Functionality implied by idreg.field == val. + +Such hwcaps indicate the availability of functionality that the ARM ARM +defines as being present when idreg.field has value val, but do not +indicate that idreg.field is precisely equal to val, nor do they +indicate the absence of functionality implied by other values of +idreg.field. + +Other hwcaps may indicate the presence of features which cannot be +described by ID registers alone. These may be described without +reference to ID registers, and may refer to other documentation. + + +3. The hwcaps exposed in AT_HWCAP +--------------------------------- + +HWCAP_FP + + Functionality implied by ID_AA64PFR0_EL1.FP == 0b0000. + +HWCAP_ASIMD + + Functionality implied by ID_AA64PFR0_EL1.AdvSIMD == 0b0000. + +HWCAP_EVTSTRM + + The generic timer is configured to generate events at a frequency of + approximately 100KHz. + +HWCAP_AES + + Functionality implied by ID_AA64ISAR1_EL1.AES == 0b0001. + +HWCAP_PMULL + + Functionality implied by ID_AA64ISAR1_EL1.AES == 0b0010. + +HWCAP_SHA1 + + Functionality implied by ID_AA64ISAR0_EL1.SHA1 == 0b0001. + +HWCAP_SHA2 + + Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0001. + +HWCAP_CRC32 + + Functionality implied by ID_AA64ISAR0_EL1.CRC32 == 0b0001. + +HWCAP_ATOMICS + + Functionality implied by ID_AA64ISAR0_EL1.Atomic == 0b0010. + +HWCAP_FPHP + + Functionality implied by ID_AA64PFR0_EL1.FP == 0b0001. + +HWCAP_ASIMDHP + + Functionality implied by ID_AA64PFR0_EL1.AdvSIMD == 0b0001. + +HWCAP_CPUID + + EL0 access to certain ID registers is available, to the extent + described by Documentation/arm64/cpu-feature-registers.txt. + + These ID registers may imply the availability of features. + +HWCAP_ASIMDRDM + + Functionality implied by ID_AA64ISAR0_EL1.RDM == 0b0001. + +HWCAP_JSCVT + + Functionality implied by ID_AA64ISAR1_EL1.JSCVT == 0b0001. + +HWCAP_FCMA + + Functionality implied by ID_AA64ISAR1_EL1.FCMA == 0b0001. + +HWCAP_LRCPC + + Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0001. + +HWCAP_DCPOP + + Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0001. + +HWCAP_SHA3 + + Functionality implied by ID_AA64ISAR0_EL1.SHA3 == 0b0001. + +HWCAP_SM3 + + Functionality implied by ID_AA64ISAR0_EL1.SM3 == 0b0001. + +HWCAP_SM4 + + Functionality implied by ID_AA64ISAR0_EL1.SM4 == 0b0001. + +HWCAP_ASIMDDP + + Functionality implied by ID_AA64ISAR0_EL1.DP == 0b0001. + +HWCAP_SHA512 + + Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0002. + +HWCAP_SVE + + Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001. diff --git a/Documentation/arm64/memory.txt b/Documentation/arm64/memory.txt index d7273a5f64566f3acfe009231cab43c05fd1e9a5..671bc0639262b8cfd96e9d1dded569772deb5952 100644 --- a/Documentation/arm64/memory.txt +++ b/Documentation/arm64/memory.txt @@ -86,9 +86,9 @@ Translation table lookup with 64KB pages: +-------------------------------------------------> [63] TTBR0/1 -When using KVM, the hypervisor maps kernel pages in EL2, at a fixed -offset from the kernel VA (top 24bits of the kernel VA set to zero): +When using KVM without the Virtualization Host Extensions, the hypervisor +maps kernel pages in EL2 at a fixed offset from the kernel VA. See the +kern_hyp_va macro for more details. -Start End Size Use ------------------------------------------------------------------------ -0000004000000000 0000007fffffffff 256GB kernel objects mapped in HYP +When using KVM with the Virtualization Host Extensions, no additional +mappings are created, since the host kernel runs directly in EL2. diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt index 304bf22bb83cc0ec8dfbbcf2a48b206ecb781afb..fc1c884fea10497357f889b11e33c6d323fecf55 100644 --- a/Documentation/arm64/silicon-errata.txt +++ b/Documentation/arm64/silicon-errata.txt @@ -75,3 +75,4 @@ stable kernels. | Qualcomm Tech. | Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 | | Qualcomm Tech. | Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 | | Qualcomm Tech. | QDF2400 ITS | E0065 | QCOM_QDF2400_ERRATUM_0065 | +| Qualcomm Tech. | Falkor v{1,2} | E1041 | QCOM_FALKOR_ERRATUM_1041 | diff --git a/Documentation/arm64/sve.txt b/Documentation/arm64/sve.txt new file mode 100644 index 0000000000000000000000000000000000000000..f128f736b4a5025f6c1964253b05472d6c76dc8b --- /dev/null +++ b/Documentation/arm64/sve.txt @@ -0,0 +1,508 @@ + Scalable Vector Extension support for AArch64 Linux + =================================================== + +Author: Dave Martin +Date: 4 August 2017 + +This document outlines briefly the interface provided to userspace by Linux in +order to support use of the ARM Scalable Vector Extension (SVE). + +This is an outline of the most important features and issues only and not +intended to be exhaustive. + +This document does not aim to describe the SVE architecture or programmer's +model. To aid understanding, a minimal description of relevant programmer's +model features for SVE is included in Appendix A. + + +1. General +----------- + +* SVE registers Z0..Z31, P0..P15 and FFR and the current vector length VL, are + tracked per-thread. + +* The presence of SVE is reported to userspace via HWCAP_SVE in the aux vector + AT_HWCAP entry. Presence of this flag implies the presence of the SVE + instructions and registers, and the Linux-specific system interfaces + described in this document. SVE is reported in /proc/cpuinfo as "sve". + +* Support for the execution of SVE instructions in userspace can also be + detected by reading the CPU ID register ID_AA64PFR0_EL1 using an MRS + instruction, and checking that the value of the SVE field is nonzero. [3] + + It does not guarantee the presence of the system interfaces described in the + following sections: software that needs to verify that those interfaces are + present must check for HWCAP_SVE instead. + +* Debuggers should restrict themselves to interacting with the target via the + NT_ARM_SVE regset. The recommended way of detecting support for this regset + is to connect to a target process first and then attempt a + ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov). + + +2. Vector length terminology +----------------------------- + +The size of an SVE vector (Z) register is referred to as the "vector length". + +To avoid confusion about the units used to express vector length, the kernel +adopts the following conventions: + +* Vector length (VL) = size of a Z-register in bytes + +* Vector quadwords (VQ) = size of a Z-register in units of 128 bits + +(So, VL = 16 * VQ.) + +The VQ convention is used where the underlying granularity is important, such +as in data structure definitions. In most other situations, the VL convention +is used. This is consistent with the meaning of the "VL" pseudo-register in +the SVE instruction set architecture. + + +3. System call behaviour +------------------------- + +* On syscall, V0..V31 are preserved (as without SVE). Thus, bits [127:0] of + Z0..Z31 are preserved. All other bits of Z0..Z31, and all of P0..P15 and FFR + become unspecified on return from a syscall. + +* The SVE registers are not used to pass arguments to or receive results from + any syscall. + +* In practice the affected registers/bits will be preserved or will be replaced + with zeros on return from a syscall, but userspace should not make + assumptions about this. The kernel behaviour may vary on a case-by-case + basis. + +* All other SVE state of a thread, including the currently configured vector + length, the state of the PR_SVE_VL_INHERIT flag, and the deferred vector + length (if any), is preserved across all syscalls, subject to the specific + exceptions for execve() described in section 6. + + In particular, on return from a fork() or clone(), the parent and new child + process or thread share identical SVE configuration, matching that of the + parent before the call. + + +4. Signal handling +------------------- + +* A new signal frame record sve_context encodes the SVE registers on signal + delivery. [1] + +* This record is supplementary to fpsimd_context. The FPSR and FPCR registers + are only present in fpsimd_context. For convenience, the content of V0..V31 + is duplicated between sve_context and fpsimd_context. + +* The signal frame record for SVE always contains basic metadata, in particular + the thread's vector length (in sve_context.vl). + +* The SVE registers may or may not be included in the record, depending on + whether the registers are live for the thread. The registers are present if + and only if: + sve_context.head.size >= SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl)). + +* If the registers are present, the remainder of the record has a vl-dependent + size and layout. Macros SVE_SIG_* are defined [1] to facilitate access to + the members. + +* If the SVE context is too big to fit in sigcontext.__reserved[], then extra + space is allocated on the stack, an extra_context record is written in + __reserved[] referencing this space. sve_context is then written in the + extra space. Refer to [1] for further details about this mechanism. + + +5. Signal return +----------------- + +When returning from a signal handler: + +* If there is no sve_context record in the signal frame, or if the record is + present but contains no register data as desribed in the previous section, + then the SVE registers/bits become non-live and take unspecified values. + +* If sve_context is present in the signal frame and contains full register + data, the SVE registers become live and are populated with the specified + data. However, for backward compatibility reasons, bits [127:0] of Z0..Z31 + are always restored from the corresponding members of fpsimd_context.vregs[] + and not from sve_context. The remaining bits are restored from sve_context. + +* Inclusion of fpsimd_context in the signal frame remains mandatory, + irrespective of whether sve_context is present or not. + +* The vector length cannot be changed via signal return. If sve_context.vl in + the signal frame does not match the current vector length, the signal return + attempt is treated as illegal, resulting in a forced SIGSEGV. + + +6. prctl extensions +-------------------- + +Some new prctl() calls are added to allow programs to manage the SVE vector +length: + +prctl(PR_SVE_SET_VL, unsigned long arg) + + Sets the vector length of the calling thread and related flags, where + arg == vl | flags. Other threads of the calling process are unaffected. + + vl is the desired vector length, where sve_vl_valid(vl) must be true. + + flags: + + PR_SVE_SET_VL_INHERIT + + Inherit the current vector length across execve(). Otherwise, the + vector length is reset to the system default at execve(). (See + Section 9.) + + PR_SVE_SET_VL_ONEXEC + + Defer the requested vector length change until the next execve() + performed by this thread. + + The effect is equivalent to implicit exceution of the following + call immediately after the next execve() (if any) by the thread: + + prctl(PR_SVE_SET_VL, arg & ~PR_SVE_SET_VL_ONEXEC) + + This allows launching of a new program with a different vector + length, while avoiding runtime side effects in the caller. + + + Without PR_SVE_SET_VL_ONEXEC, the requested change takes effect + immediately. + + + Return value: a nonnegative on success, or a negative value on error: + EINVAL: SVE not supported, invalid vector length requested, or + invalid flags. + + + On success: + + * Either the calling thread's vector length or the deferred vector length + to be applied at the next execve() by the thread (dependent on whether + PR_SVE_SET_VL_ONEXEC is present in arg), is set to the largest value + supported by the system that is less than or equal to vl. If vl == + SVE_VL_MAX, the value set will be the largest value supported by the + system. + + * Any previously outstanding deferred vector length change in the calling + thread is cancelled. + + * The returned value describes the resulting configuration, encoded as for + PR_SVE_GET_VL. The vector length reported in this value is the new + current vector length for this thread if PR_SVE_SET_VL_ONEXEC was not + present in arg; otherwise, the reported vector length is the deferred + vector length that will be applied at the next execve() by the calling + thread. + + * Changing the vector length causes all of P0..P15, FFR and all bits of + Z0..V31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become + unspecified. Calling PR_SVE_SET_VL with vl equal to the thread's current + vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC + flag, does not constitute a change to the vector length for this purpose. + + +prctl(PR_SVE_GET_VL) + + Gets the vector length of the calling thread. + + The following flag may be OR-ed into the result: + + PR_SVE_SET_VL_INHERIT + + Vector length will be inherited across execve(). + + There is no way to determine whether there is an outstanding deferred + vector length change (which would only normally be the case between a + fork() or vfork() and the corresponding execve() in typical use). + + To extract the vector length from the result, and it with + PR_SVE_VL_LEN_MASK. + + Return value: a nonnegative value on success, or a negative value on error: + EINVAL: SVE not supported. + + +7. ptrace extensions +--------------------- + +* A new regset NT_ARM_SVE is defined for use with PTRACE_GETREGSET and + PTRACE_SETREGSET. + + Refer to [2] for definitions. + +The regset data starts with struct user_sve_header, containing: + + size + + Size of the complete regset, in bytes. + This depends on vl and possibly on other things in the future. + + If a call to PTRACE_GETREGSET requests less data than the value of + size, the caller can allocate a larger buffer and retry in order to + read the complete regset. + + max_size + + Maximum size in bytes that the regset can grow to for the target + thread. The regset won't grow bigger than this even if the target + thread changes its vector length etc. + + vl + + Target thread's current vector length, in bytes. + + max_vl + + Maximum possible vector length for the target thread. + + flags + + either + + SVE_PT_REGS_FPSIMD + + SVE registers are not live (GETREGSET) or are to be made + non-live (SETREGSET). + + The payload is of type struct user_fpsimd_state, with the same + meaning as for NT_PRFPREG, starting at offset + SVE_PT_FPSIMD_OFFSET from the start of user_sve_header. + + Extra data might be appended in the future: the size of the + payload should be obtained using SVE_PT_FPSIMD_SIZE(vq, flags). + + vq should be obtained using sve_vq_from_vl(vl). + + or + + SVE_PT_REGS_SVE + + SVE registers are live (GETREGSET) or are to be made live + (SETREGSET). + + The payload contains the SVE register data, starting at offset + SVE_PT_SVE_OFFSET from the start of user_sve_header, and with + size SVE_PT_SVE_SIZE(vq, flags); + + ... OR-ed with zero or more of the following flags, which have the same + meaning and behaviour as the corresponding PR_SET_VL_* flags: + + SVE_PT_VL_INHERIT + + SVE_PT_VL_ONEXEC (SETREGSET only). + +* The effects of changing the vector length and/or flags are equivalent to + those documented for PR_SVE_SET_VL. + + The caller must make a further GETREGSET call if it needs to know what VL is + actually set by SETREGSET, unless is it known in advance that the requested + VL is supported. + +* In the SVE_PT_REGS_SVE case, the size and layout of the payload depends on + the header fields. The SVE_PT_SVE_*() macros are provided to facilitate + access to the members. + +* In either case, for SETREGSET it is permissible to omit the payload, in which + case only the vector length and flags are changed (along with any + consequences of those changes). + +* For SETREGSET, if an SVE_PT_REGS_SVE payload is present and the + requested VL is not supported, the effect will be the same as if the + payload were omitted, except that an EIO error is reported. No + attempt is made to translate the payload data to the correct layout + for the vector length actually set. The thread's FPSIMD state is + preserved, but the remaining bits of the SVE registers become + unspecified. It is up to the caller to translate the payload layout + for the actual VL and retry. + +* The effect of writing a partial, incomplete payload is unspecified. + + +8. ELF coredump extensions +--------------------------- + +* A NT_ARM_SVE note will be added to each coredump for each thread of the + dumped process. The contents will be equivalent to the data that would have + been read if a PTRACE_GETREGSET of NT_ARM_SVE were executed for each thread + when the coredump was generated. + + +9. System runtime configuration +-------------------------------- + +* To mitigate the ABI impact of expansion of the signal frame, a policy + mechanism is provided for administrators, distro maintainers and developers + to set the default vector length for userspace processes: + +/proc/sys/abi/sve_default_vector_length + + Writing the text representation of an integer to this file sets the system + default vector length to the specified value, unless the value is greater + than the maximum vector length supported by the system in which case the + default vector length is set to that maximum. + + The result can be determined by reopening the file and reading its + contents. + + At boot, the default vector length is initially set to 64 or the maximum + supported vector length, whichever is smaller. This determines the initial + vector length of the init process (PID 1). + + Reading this file returns the current system default vector length. + +* At every execve() call, the new vector length of the new process is set to + the system default vector length, unless + + * PR_SVE_SET_VL_INHERIT (or equivalently SVE_PT_VL_INHERIT) is set for the + calling thread, or + + * a deferred vector length change is pending, established via the + PR_SVE_SET_VL_ONEXEC flag (or SVE_PT_VL_ONEXEC). + +* Modifying the system default vector length does not affect the vector length + of any existing process or thread that does not make an execve() call. + + +Appendix A. SVE programmer's model (informative) +================================================= + +This section provides a minimal description of the additions made by SVE to the +ARMv8-A programmer's model that are relevant to this document. + +Note: This section is for information only and not intended to be complete or +to replace any architectural specification. + +A.1. Registers +--------------- + +In A64 state, SVE adds the following: + +* 32 8VL-bit vector registers Z0..Z31 + For each Zn, Zn bits [127:0] alias the ARMv8-A vector register Vn. + + A register write using a Vn register name zeros all bits of the corresponding + Zn except for bits [127:0]. + +* 16 VL-bit predicate registers P0..P15 + +* 1 VL-bit special-purpose predicate register FFR (the "first-fault register") + +* a VL "pseudo-register" that determines the size of each vector register + + The SVE instruction set architecture provides no way to write VL directly. + Instead, it can be modified only by EL1 and above, by writing appropriate + system registers. + +* The value of VL can be configured at runtime by EL1 and above: + 16 <= VL <= VLmax, where VL must be a multiple of 16. + +* The maximum vector length is determined by the hardware: + 16 <= VLmax <= 256. + + (The SVE architecture specifies 256, but permits future architecture + revisions to raise this limit.) + +* FPSR and FPCR are retained from ARMv8-A, and interact with SVE floating-point + operations in a similar way to the way in which they interact with ARMv8 + floating-point operations. + + 8VL-1 128 0 bit index + +---- //// -----------------+ + Z0 | : V0 | + : : + Z7 | : V7 | + Z8 | : * V8 | + : : : + Z15 | : *V15 | + Z16 | : V16 | + : : + Z31 | : V31 | + +---- //// -----------------+ + 31 0 + VL-1 0 +-------+ + +---- //// --+ FPSR | | + P0 | | +-------+ + : | | *FPCR | | + P15 | | +-------+ + +---- //// --+ + FFR | | +-----+ + +---- //// --+ VL | | + +-----+ + +(*) callee-save: + This only applies to bits [63:0] of Z-/V-registers. + FPCR contains callee-save and caller-save bits. See [4] for details. + + +A.2. Procedure call standard +----------------------------- + +The ARMv8-A base procedure call standard is extended as follows with respect to +the additional SVE register state: + +* All SVE register bits that are not shared with FP/SIMD are caller-save. + +* Z8 bits [63:0] .. Z15 bits [63:0] are callee-save. + + This follows from the way these bits are mapped to V8..V15, which are caller- + save in the base procedure call standard. + + +Appendix B. ARMv8-A FP/SIMD programmer's model +=============================================== + +Note: This section is for information only and not intended to be complete or +to replace any architectural specification. + +Refer to [4] for for more information. + +ARMv8-A defines the following floating-point / SIMD register state: + +* 32 128-bit vector registers V0..V31 +* 2 32-bit status/control registers FPSR, FPCR + + 127 0 bit index + +---------------+ + V0 | | + : : : + V7 | | + * V8 | | + : : : : + *V15 | | + V16 | | + : : : + V31 | | + +---------------+ + + 31 0 + +-------+ + FPSR | | + +-------+ + *FPCR | | + +-------+ + +(*) callee-save: + This only applies to bits [63:0] of V-registers. + FPCR contains a mixture of callee-save and caller-save bits. + + +References +========== + +[1] arch/arm64/include/uapi/asm/sigcontext.h + AArch64 Linux signal ABI definitions + +[2] arch/arm64/include/uapi/asm/ptrace.h + AArch64 Linux ptrace ABI definitions + +[3] linux/Documentation/arm64/cpu-feature-registers.txt + +[4] ARM IHI0055C + http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf + http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html + Procedure Call Standard for the ARM 64-bit Architecture (AArch64) diff --git a/Documentation/block/bfq-iosched.txt b/Documentation/block/bfq-iosched.txt index 3d6951d63489563e60f4da62eabd8e49608479f8..8d8d8f06cab29aab5fb07b96c9a5e452515fb819 100644 --- a/Documentation/block/bfq-iosched.txt +++ b/Documentation/block/bfq-iosched.txt @@ -20,12 +20,27 @@ for that device, by setting low_latency to 0. See Section 3 for details on how to configure BFQ for the desired tradeoff between latency and throughput, or on how to maximize throughput. -On average CPUs, the current version of BFQ can handle devices -performing at most ~30K IOPS; at most ~50 KIOPS on faster CPUs. As a -reference, 30-50 KIOPS correspond to very high bandwidths with -sequential I/O (e.g., 8-12 GB/s if I/O requests are 256 KB large), and -to 120-200 MB/s with 4KB random I/O. BFQ is currently being tested on -multi-queue devices too. +BFQ has a non-null overhead, which limits the maximum IOPS that a CPU +can process for a device scheduled with BFQ. To give an idea of the +limits on slow or average CPUs, here are, first, the limits of BFQ for +three different CPUs, on, respectively, an average laptop, an old +desktop, and a cheap embedded system, in case full hierarchical +support is enabled (i.e., CONFIG_BFQ_GROUP_IOSCHED is set), but +CONFIG_DEBUG_BLK_CGROUP is not set (Section 4-2): +- Intel i7-4850HQ: 400 KIOPS +- AMD A8-3850: 250 KIOPS +- ARM CortexTM-A53 Octa-core: 80 KIOPS + +If CONFIG_DEBUG_BLK_CGROUP is set (and of course full hierarchical +support is enabled), then the sustainable throughput with BFQ +decreases, because all blkio.bfq* statistics are created and updated +(Section 4-2). For BFQ, this leads to the following maximum +sustainable throughputs, on the same systems as above: +- Intel i7-4850HQ: 310 KIOPS +- AMD A8-3850: 200 KIOPS +- ARM CortexTM-A53 Octa-core: 56 KIOPS + +BFQ works for multi-queue devices too. The table of contents follow. Impatients can just jump to Section 3. @@ -500,6 +515,22 @@ BFQ-specific files is "blkio.bfq." or "io.bfq." For example, the group parameter to set the weight of a group with BFQ is blkio.bfq.weight or io.bfq.weight. +As for cgroups-v1 (blkio controller), the exact set of stat files +created, and kept up-to-date by bfq, depends on whether +CONFIG_DEBUG_BLK_CGROUP is set. If it is set, then bfq creates all +the stat files documented in +Documentation/cgroup-v1/blkio-controller.txt. If, instead, +CONFIG_DEBUG_BLK_CGROUP is not set, then bfq creates only the files +blkio.bfq.io_service_bytes +blkio.bfq.io_service_bytes_recursive +blkio.bfq.io_serviced +blkio.bfq.io_serviced_recursive + +The value of CONFIG_DEBUG_BLK_CGROUP greatly influences the maximum +throughput sustainable with bfq, because updating the blkio.bfq.* +stats is rather costly, especially for some of the stats enabled by +CONFIG_DEBUG_BLK_CGROUP. + Parameters to set ----------------- diff --git a/Documentation/bpf/bpf_design_QA.txt b/Documentation/bpf/bpf_design_QA.txt new file mode 100644 index 0000000000000000000000000000000000000000..f3e458a0bb2f1f26e376239ffc4200b13294debf --- /dev/null +++ b/Documentation/bpf/bpf_design_QA.txt @@ -0,0 +1,156 @@ +BPF extensibility and applicability to networking, tracing, security +in the linux kernel and several user space implementations of BPF +virtual machine led to a number of misunderstanding on what BPF actually is. +This short QA is an attempt to address that and outline a direction +of where BPF is heading long term. + +Q: Is BPF a generic instruction set similar to x64 and arm64? +A: NO. + +Q: Is BPF a generic virtual machine ? +A: NO. + +BPF is generic instruction set _with_ C calling convention. + +Q: Why C calling convention was chosen? +A: Because BPF programs are designed to run in the linux kernel + which is written in C, hence BPF defines instruction set compatible + with two most used architectures x64 and arm64 (and takes into + consideration important quirks of other architectures) and + defines calling convention that is compatible with C calling + convention of the linux kernel on those architectures. + +Q: can multiple return values be supported in the future? +A: NO. BPF allows only register R0 to be used as return value. + +Q: can more than 5 function arguments be supported in the future? +A: NO. BPF calling convention only allows registers R1-R5 to be used + as arguments. BPF is not a standalone instruction set. + (unlike x64 ISA that allows msft, cdecl and other conventions) + +Q: can BPF programs access instruction pointer or return address? +A: NO. + +Q: can BPF programs access stack pointer ? +A: NO. Only frame pointer (register R10) is accessible. + From compiler point of view it's necessary to have stack pointer. + For example LLVM defines register R11 as stack pointer in its + BPF backend, but it makes sure that generated code never uses it. + +Q: Does C-calling convention diminishes possible use cases? +A: YES. BPF design forces addition of major functionality in the form + of kernel helper functions and kernel objects like BPF maps with + seamless interoperability between them. It lets kernel call into + BPF programs and programs call kernel helpers with zero overhead. + As all of them were native C code. That is particularly the case + for JITed BPF programs that are indistinguishable from + native kernel C code. + +Q: Does it mean that 'innovative' extensions to BPF code are disallowed? +A: Soft yes. At least for now until BPF core has support for + bpf-to-bpf calls, indirect calls, loops, global variables, + jump tables, read only sections and all other normal constructs + that C code can produce. + +Q: Can loops be supported in a safe way? +A: It's not clear yet. BPF developers are trying to find a way to + support bounded loops where the verifier can guarantee that + the program terminates in less than 4096 instructions. + +Q: How come LD_ABS and LD_IND instruction are present in BPF whereas + C code cannot express them and has to use builtin intrinsics? +A: This is artifact of compatibility with classic BPF. Modern + networking code in BPF performs better without them. + See 'direct packet access'. + +Q: It seems not all BPF instructions are one-to-one to native CPU. + For example why BPF_JNE and other compare and jumps are not cpu-like? +A: This was necessary to avoid introducing flags into ISA which are + impossible to make generic and efficient across CPU architectures. + +Q: why BPF_DIV instruction doesn't map to x64 div? +A: Because if we picked one-to-one relationship to x64 it would have made + it more complicated to support on arm64 and other archs. Also it + needs div-by-zero runtime check. + +Q: why there is no BPF_SDIV for signed divide operation? +A: Because it would be rarely used. llvm errors in such case and + prints a suggestion to use unsigned divide instead + +Q: Why BPF has implicit prologue and epilogue? +A: Because architectures like sparc have register windows and in general + there are enough subtle differences between architectures, so naive + store return address into stack won't work. Another reason is BPF has + to be safe from division by zero (and legacy exception path + of LD_ABS insn). Those instructions need to invoke epilogue and + return implicitly. + +Q: Why BPF_JLT and BPF_JLE instructions were not introduced in the beginning? +A: Because classic BPF didn't have them and BPF authors felt that compiler + workaround would be acceptable. Turned out that programs lose performance + due to lack of these compare instructions and they were added. + These two instructions is a perfect example what kind of new BPF + instructions are acceptable and can be added in the future. + These two already had equivalent instructions in native CPUs. + New instructions that don't have one-to-one mapping to HW instructions + will not be accepted. + +Q: BPF 32-bit subregisters have a requirement to zero upper 32-bits of BPF + registers which makes BPF inefficient virtual machine for 32-bit + CPU architectures and 32-bit HW accelerators. Can true 32-bit registers + be added to BPF in the future? +A: NO. The first thing to improve performance on 32-bit archs is to teach + LLVM to generate code that uses 32-bit subregisters. Then second step + is to teach verifier to mark operations where zero-ing upper bits + is unnecessary. Then JITs can take advantage of those markings and + drastically reduce size of generated code and improve performance. + +Q: Does BPF have a stable ABI? +A: YES. BPF instructions, arguments to BPF programs, set of helper + functions and their arguments, recognized return codes are all part + of ABI. However when tracing programs are using bpf_probe_read() helper + to walk kernel internal datastructures and compile with kernel + internal headers these accesses can and will break with newer + kernels. The union bpf_attr -> kern_version is checked at load time + to prevent accidentally loading kprobe-based bpf programs written + for a different kernel. Networking programs don't do kern_version check. + +Q: How much stack space a BPF program uses? +A: Currently all program types are limited to 512 bytes of stack + space, but the verifier computes the actual amount of stack used + and both interpreter and most JITed code consume necessary amount. + +Q: Can BPF be offloaded to HW? +A: YES. BPF HW offload is supported by NFP driver. + +Q: Does classic BPF interpreter still exist? +A: NO. Classic BPF programs are converted into extend BPF instructions. + +Q: Can BPF call arbitrary kernel functions? +A: NO. BPF programs can only call a set of helper functions which + is defined for every program type. + +Q: Can BPF overwrite arbitrary kernel memory? +A: NO. Tracing bpf programs can _read_ arbitrary memory with bpf_probe_read() + and bpf_probe_read_str() helpers. Networking programs cannot read + arbitrary memory, since they don't have access to these helpers. + Programs can never read or write arbitrary memory directly. + +Q: Can BPF overwrite arbitrary user memory? +A: Sort-of. Tracing BPF programs can overwrite the user memory + of the current task with bpf_probe_write_user(). Every time such + program is loaded the kernel will print warning message, so + this helper is only useful for experiments and prototypes. + Tracing BPF programs are root only. + +Q: When bpf_trace_printk() helper is used the kernel prints nasty + warning message. Why is that? +A: This is done to nudge program authors into better interfaces when + programs need to pass data to user space. Like bpf_perf_event_output() + can be used to efficiently stream data via perf ring buffer. + BPF maps can be used for asynchronous data sharing between kernel + and user space. bpf_trace_printk() should only be used for debugging. + +Q: Can BPF functionality such as new program or map types, new + helpers, etc be added out of kernel module code? +A: NO. diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt index dc44785dc0fa146a2de30aa11ef2c410f1b00622..2cddab7efb20df0dcf07c4d7d64a5611138a8d7c 100644 --- a/Documentation/cgroup-v2.txt +++ b/Documentation/cgroup-v2.txt @@ -893,15 +893,18 @@ Controllers CPU --- -.. note:: - - The interface for the cpu controller hasn't been merged yet - The "cpu" controllers regulates distribution of CPU cycles. This controller implements weight and absolute bandwidth limit models for normal scheduling policy and absolute bandwidth allocation model for realtime scheduling policy. +WARNING: cgroup2 doesn't yet support control of realtime processes and +the cpu controller can only be enabled when all RT processes are in +the root cgroup. Be aware that system management software may already +have placed RT processes into nonroot cgroups during the system boot +process, and these processes may need to be moved to the root cgroup +before the cpu controller can be enabled. + CPU Interface Files ~~~~~~~~~~~~~~~~~~~ @@ -910,12 +913,16 @@ All time durations are in microseconds. cpu.stat A read-only flat-keyed file which exists on non-root cgroups. + This file exists whether the controller is enabled or not. - It reports the following six stats: + It always reports the following three stats: - usage_usec - user_usec - system_usec + + and the following three when the controller is enabled: + - nr_periods - nr_throttled - throttled_usec @@ -926,6 +933,18 @@ All time durations are in microseconds. The weight in the range [1, 10000]. + cpu.weight.nice + A read-write single value file which exists on non-root + cgroups. The default is "0". + + The nice value is in the range [-20, 19]. + + This interface file is an alternative interface for + "cpu.weight" and allows reading and setting weight using the + same values used by nice(2). Because the range is smaller and + granularity is coarser for the nice values, the read value is + the closest approximation of the current weight. + cpu.max A read-write two value file which exists on non-root cgroups. The default is "max 100000". @@ -938,26 +957,6 @@ All time durations are in microseconds. $PERIOD duration. "max" for $MAX indicates no limit. If only one number is written, $MAX is updated. - cpu.rt.max - .. note:: - - The semantics of this file is still under discussion and the - interface hasn't been merged yet - - A read-write two value file which exists on all cgroups. - The default is "0 100000". - - The maximum realtime runtime allocation. Over-committing - configurations are disallowed and process migrations are - rejected if not enough bandwidth is available. It's in the - following format:: - - $MAX $PERIOD - - which indicates that the group may consume upto $MAX in each - $PERIOD duration. If only one number is written, $MAX is - updated. - Memory ------ diff --git a/Documentation/clearing-warn-once.txt b/Documentation/clearing-warn-once.txt new file mode 100644 index 0000000000000000000000000000000000000000..5b1f5d547be12d965da254a83e6b9cb24272842d --- /dev/null +++ b/Documentation/clearing-warn-once.txt @@ -0,0 +1,7 @@ + +WARN_ONCE / WARN_ON_ONCE only print a warning once. + +echo 1 > /sys/kernel/debug/clear_warn_once + +clears the state and allows the warnings to print once again. +This can be useful after test suite runs to reproduce problems. diff --git a/Documentation/core-api/genericirq.rst b/Documentation/core-api/genericirq.rst index 0054bd48be849035146239cb6efc0d7dba0c0a62..4da67b65cecfa68e536efe7a6905cc0757df0417 100644 --- a/Documentation/core-api/genericirq.rst +++ b/Documentation/core-api/genericirq.rst @@ -225,9 +225,9 @@ interrupts. The following control flow is implemented (simplified excerpt):: - :c:func:`desc->irq_data.chip->irq_mask_ack`; + desc->irq_data.chip->irq_mask_ack(); handle_irq_event(desc->action); - :c:func:`desc->irq_data.chip->irq_unmask`; + desc->irq_data.chip->irq_unmask(); Default Fast EOI IRQ flow handler @@ -239,7 +239,7 @@ which only need an EOI at the end of the handler. The following control flow is implemented (simplified excerpt):: handle_irq_event(desc->action); - :c:func:`desc->irq_data.chip->irq_eoi`; + desc->irq_data.chip->irq_eoi(); Default Edge IRQ flow handler @@ -251,15 +251,15 @@ interrupts. The following control flow is implemented (simplified excerpt):: if (desc->status & running) { - :c:func:`desc->irq_data.chip->irq_mask_ack`; + desc->irq_data.chip->irq_mask_ack(); desc->status |= pending | masked; return; } - :c:func:`desc->irq_data.chip->irq_ack`; + desc->irq_data.chip->irq_ack(); desc->status |= running; do { if (desc->status & masked) - :c:func:`desc->irq_data.chip->irq_unmask`; + desc->irq_data.chip->irq_unmask(); desc->status &= ~pending; handle_irq_event(desc->action); } while (status & pending); @@ -293,10 +293,10 @@ simplified version without locking. The following control flow is implemented (simplified excerpt):: if (desc->irq_data.chip->irq_ack) - :c:func:`desc->irq_data.chip->irq_ack`; + desc->irq_data.chip->irq_ack(); handle_irq_event(desc->action); if (desc->irq_data.chip->irq_eoi) - :c:func:`desc->irq_data.chip->irq_eoi`; + desc->irq_data.chip->irq_eoi(); EOI Edge IRQ flow handler diff --git a/Documentation/core-api/local_ops.rst b/Documentation/core-api/local_ops.rst index 1062ddba62c7608bb96f4211e2a6a0863f8a47c3..2ac3f9f2984531dda8a28ac9daaf3aa3d0ea8985 100644 --- a/Documentation/core-api/local_ops.rst +++ b/Documentation/core-api/local_ops.rst @@ -177,18 +177,14 @@ Here is a sample module which implements a basic per cpu counter using printk("Read : CPU %d, count %ld\n", cpu, local_read(&per_cpu(counters, cpu))); } - del_timer(&test_timer); - test_timer.expires = jiffies + 1000; - add_timer(&test_timer); + mod_timer(&test_timer, jiffies + 1000); } static int __init test_init(void) { /* initialize the timer that will increment the counter */ - init_timer(&test_timer); - test_timer.function = do_test_timer; - test_timer.expires = jiffies + 1; - add_timer(&test_timer); + timer_setup(&test_timer, do_test_timer, 0); + mod_timer(&test_timer, jiffies + 1); return 0; } diff --git a/Documentation/dev-tools/coccinelle.rst b/Documentation/dev-tools/coccinelle.rst index 37e474ff69115da89dd780475a35d119d5ee4383..94f41c290bfc69eb417066c0cff30f361f1c9bcc 100644 --- a/Documentation/dev-tools/coccinelle.rst +++ b/Documentation/dev-tools/coccinelle.rst @@ -33,9 +33,6 @@ of many distributions, e.g. : You can get the latest version released from the Coccinelle homepage at http://coccinelle.lip6.fr/ -Information and tips about Coccinelle are also provided on the wiki -pages at http://cocci.ekstranet.diku.dk/wiki/doku.php - Once you have it, run the following command:: ./configure diff --git a/Documentation/dev-tools/index.rst b/Documentation/dev-tools/index.rst index a81787cd47d793746f28e1035630b13298dc65f8..e313925fb0fa50d5826dd194461f6e5ec00f424a 100644 --- a/Documentation/dev-tools/index.rst +++ b/Documentation/dev-tools/index.rst @@ -21,7 +21,6 @@ whole; patches welcome! kasan ubsan kmemleak - kmemcheck gdb-kernel-debugging kgdb kselftest diff --git a/Documentation/dev-tools/kcov.rst b/Documentation/dev-tools/kcov.rst index 44886c91e112d4d21a41e0c4d1a96f37a584aa68..c2f6452e38ed000edc63440ad66b49da63aed481 100644 --- a/Documentation/dev-tools/kcov.rst +++ b/Documentation/dev-tools/kcov.rst @@ -12,19 +12,30 @@ To achieve this goal it does not collect coverage in soft/hard interrupts and instrumentation of some inherently non-deterministic parts of kernel is disabled (e.g. scheduler, locking). -Usage ------ +kcov is also able to collect comparison operands from the instrumented code +(this feature currently requires that the kernel is compiled with clang). + +Prerequisites +------------- Configure the kernel with:: CONFIG_KCOV=y CONFIG_KCOV requires gcc built on revision 231296 or later. + +If the comparison operands need to be collected, set:: + + CONFIG_KCOV_ENABLE_COMPARISONS=y + Profiling data will only become accessible once debugfs has been mounted:: mount -t debugfs none /sys/kernel/debug -The following program demonstrates kcov usage from within a test program: +Coverage collection +------------------- +The following program demonstrates coverage collection from within a test +program using kcov: .. code-block:: c @@ -44,6 +55,9 @@ The following program demonstrates kcov usage from within a test program: #define KCOV_DISABLE _IO('c', 101) #define COVER_SIZE (64<<10) + #define KCOV_TRACE_PC 0 + #define KCOV_TRACE_CMP 1 + int main(int argc, char **argv) { int fd; @@ -64,7 +78,7 @@ The following program demonstrates kcov usage from within a test program: if ((void*)cover == MAP_FAILED) perror("mmap"), exit(1); /* Enable coverage collection on the current thread. */ - if (ioctl(fd, KCOV_ENABLE, 0)) + if (ioctl(fd, KCOV_ENABLE, KCOV_TRACE_PC)) perror("ioctl"), exit(1); /* Reset coverage from the tail of the ioctl() call. */ __atomic_store_n(&cover[0], 0, __ATOMIC_RELAXED); @@ -111,3 +125,80 @@ The interface is fine-grained to allow efficient forking of test processes. That is, a parent process opens /sys/kernel/debug/kcov, enables trace mode, mmaps coverage buffer and then forks child processes in a loop. Child processes only need to enable coverage (disable happens automatically on thread end). + +Comparison operands collection +------------------------------ +Comparison operands collection is similar to coverage collection: + +.. code-block:: c + + /* Same includes and defines as above. */ + + /* Number of 64-bit words per record. */ + #define KCOV_WORDS_PER_CMP 4 + + /* + * The format for the types of collected comparisons. + * + * Bit 0 shows whether one of the arguments is a compile-time constant. + * Bits 1 & 2 contain log2 of the argument size, up to 8 bytes. + */ + + #define KCOV_CMP_CONST (1 << 0) + #define KCOV_CMP_SIZE(n) ((n) << 1) + #define KCOV_CMP_MASK KCOV_CMP_SIZE(3) + + int main(int argc, char **argv) + { + int fd; + uint64_t *cover, type, arg1, arg2, is_const, size; + unsigned long n, i; + + fd = open("/sys/kernel/debug/kcov", O_RDWR); + if (fd == -1) + perror("open"), exit(1); + if (ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE)) + perror("ioctl"), exit(1); + /* + * Note that the buffer pointer is of type uint64_t*, because all + * the comparison operands are promoted to uint64_t. + */ + cover = (uint64_t *)mmap(NULL, COVER_SIZE * sizeof(unsigned long), + PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); + if ((void*)cover == MAP_FAILED) + perror("mmap"), exit(1); + /* Note KCOV_TRACE_CMP instead of KCOV_TRACE_PC. */ + if (ioctl(fd, KCOV_ENABLE, KCOV_TRACE_CMP)) + perror("ioctl"), exit(1); + __atomic_store_n(&cover[0], 0, __ATOMIC_RELAXED); + read(-1, NULL, 0); + /* Read number of comparisons collected. */ + n = __atomic_load_n(&cover[0], __ATOMIC_RELAXED); + for (i = 0; i < n; i++) { + type = cover[i * KCOV_WORDS_PER_CMP + 1]; + /* arg1 and arg2 - operands of the comparison. */ + arg1 = cover[i * KCOV_WORDS_PER_CMP + 2]; + arg2 = cover[i * KCOV_WORDS_PER_CMP + 3]; + /* ip - caller address. */ + ip = cover[i * KCOV_WORDS_PER_CMP + 4]; + /* size of the operands. */ + size = 1 << ((type & KCOV_CMP_MASK) >> 1); + /* is_const - true if either operand is a compile-time constant.*/ + is_const = type & KCOV_CMP_CONST; + printf("ip: 0x%lx type: 0x%lx, arg1: 0x%lx, arg2: 0x%lx, " + "size: %lu, %s\n", + ip, type, arg1, arg2, size, + is_const ? "const" : "non-const"); + } + if (ioctl(fd, KCOV_DISABLE, 0)) + perror("ioctl"), exit(1); + /* Free resources. */ + if (munmap(cover, COVER_SIZE * sizeof(unsigned long))) + perror("munmap"), exit(1); + if (close(fd)) + perror("close"), exit(1); + return 0; + } + +Note that the kcov modes (coverage collection or comparison operands) are +mutually exclusive. diff --git a/Documentation/dev-tools/kmemcheck.rst b/Documentation/dev-tools/kmemcheck.rst deleted file mode 100644 index 7f3d1985de743f00860e69033564043aa145ad39..0000000000000000000000000000000000000000 --- a/Documentation/dev-tools/kmemcheck.rst +++ /dev/null @@ -1,733 +0,0 @@ -Getting started with kmemcheck -============================== - -Vegard Nossum - - -Introduction ------------- - -kmemcheck is a debugging feature for the Linux Kernel. More specifically, it -is a dynamic checker that detects and warns about some uses of uninitialized -memory. - -Userspace programmers might be familiar with Valgrind's memcheck. The main -difference between memcheck and kmemcheck is that memcheck works for userspace -programs only, and kmemcheck works for the kernel only. The implementations -are of course vastly different. Because of this, kmemcheck is not as accurate -as memcheck, but it turns out to be good enough in practice to discover real -programmer errors that the compiler is not able to find through static -analysis. - -Enabling kmemcheck on a kernel will probably slow it down to the extent that -the machine will not be usable for normal workloads such as e.g. an -interactive desktop. kmemcheck will also cause the kernel to use about twice -as much memory as normal. For this reason, kmemcheck is strictly a debugging -feature. - - -Downloading ------------ - -As of version 2.6.31-rc1, kmemcheck is included in the mainline kernel. - - -Configuring and compiling -------------------------- - -kmemcheck only works for the x86 (both 32- and 64-bit) platform. A number of -configuration variables must have specific settings in order for the kmemcheck -menu to even appear in "menuconfig". These are: - -- ``CONFIG_CC_OPTIMIZE_FOR_SIZE=n`` - This option is located under "General setup" / "Optimize for size". - - Without this, gcc will use certain optimizations that usually lead to - false positive warnings from kmemcheck. An example of this is a 16-bit - field in a struct, where gcc may load 32 bits, then discard the upper - 16 bits. kmemcheck sees only the 32-bit load, and may trigger a - warning for the upper 16 bits (if they're uninitialized). - -- ``CONFIG_SLAB=y`` or ``CONFIG_SLUB=y`` - This option is located under "General setup" / "Choose SLAB - allocator". - -- ``CONFIG_FUNCTION_TRACER=n`` - This option is located under "Kernel hacking" / "Tracers" / "Kernel - Function Tracer" - - When function tracing is compiled in, gcc emits a call to another - function at the beginning of every function. This means that when the - page fault handler is called, the ftrace framework will be called - before kmemcheck has had a chance to handle the fault. If ftrace then - modifies memory that was tracked by kmemcheck, the result is an - endless recursive page fault. - -- ``CONFIG_DEBUG_PAGEALLOC=n`` - This option is located under "Kernel hacking" / "Memory Debugging" - / "Debug page memory allocations". - -In addition, I highly recommend turning on ``CONFIG_DEBUG_INFO=y``. This is also -located under "Kernel hacking". With this, you will be able to get line number -information from the kmemcheck warnings, which is extremely valuable in -debugging a problem. This option is not mandatory, however, because it slows -down the compilation process and produces a much bigger kernel image. - -Now the kmemcheck menu should be visible (under "Kernel hacking" / "Memory -Debugging" / "kmemcheck: trap use of uninitialized memory"). Here follows -a description of the kmemcheck configuration variables: - -- ``CONFIG_KMEMCHECK`` - This must be enabled in order to use kmemcheck at all... - -- ``CONFIG_KMEMCHECK_``[``DISABLED`` | ``ENABLED`` | ``ONESHOT``]``_BY_DEFAULT`` - This option controls the status of kmemcheck at boot-time. "Enabled" - will enable kmemcheck right from the start, "disabled" will boot the - kernel as normal (but with the kmemcheck code compiled in, so it can - be enabled at run-time after the kernel has booted), and "one-shot" is - a special mode which will turn kmemcheck off automatically after - detecting the first use of uninitialized memory. - - If you are using kmemcheck to actively debug a problem, then you - probably want to choose "enabled" here. - - The one-shot mode is mostly useful in automated test setups because it - can prevent floods of warnings and increase the chances of the machine - surviving in case something is really wrong. In other cases, the one- - shot mode could actually be counter-productive because it would turn - itself off at the very first error -- in the case of a false positive - too -- and this would come in the way of debugging the specific - problem you were interested in. - - If you would like to use your kernel as normal, but with a chance to - enable kmemcheck in case of some problem, it might be a good idea to - choose "disabled" here. When kmemcheck is disabled, most of the run- - time overhead is not incurred, and the kernel will be almost as fast - as normal. - -- ``CONFIG_KMEMCHECK_QUEUE_SIZE`` - Select the maximum number of error reports to store in an internal - (fixed-size) buffer. Since errors can occur virtually anywhere and in - any context, we need a temporary storage area which is guaranteed not - to generate any other page faults when accessed. The queue will be - emptied as soon as a tasklet may be scheduled. If the queue is full, - new error reports will be lost. - - The default value of 64 is probably fine. If some code produces more - than 64 errors within an irqs-off section, then the code is likely to - produce many, many more, too, and these additional reports seldom give - any more information (the first report is usually the most valuable - anyway). - - This number might have to be adjusted if you are not using serial - console or similar to capture the kernel log. If you are using the - "dmesg" command to save the log, then getting a lot of kmemcheck - warnings might overflow the kernel log itself, and the earlier reports - will get lost in that way instead. Try setting this to 10 or so on - such a setup. - -- ``CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT`` - Select the number of shadow bytes to save along with each entry of the - error-report queue. These bytes indicate what parts of an allocation - are initialized, uninitialized, etc. and will be displayed when an - error is detected to help the debugging of a particular problem. - - The number entered here is actually the logarithm of the number of - bytes that will be saved. So if you pick for example 5 here, kmemcheck - will save 2^5 = 32 bytes. - - The default value should be fine for debugging most problems. It also - fits nicely within 80 columns. - -- ``CONFIG_KMEMCHECK_PARTIAL_OK`` - This option (when enabled) works around certain GCC optimizations that - produce 32-bit reads from 16-bit variables where the upper 16 bits are - thrown away afterwards. - - The default value (enabled) is recommended. This may of course hide - some real errors, but disabling it would probably produce a lot of - false positives. - -- ``CONFIG_KMEMCHECK_BITOPS_OK`` - This option silences warnings that would be generated for bit-field - accesses where not all the bits are initialized at the same time. This - may also hide some real bugs. - - This option is probably obsolete, or it should be replaced with - the kmemcheck-/bitfield-annotations for the code in question. The - default value is therefore fine. - -Now compile the kernel as usual. - - -How to use ----------- - -Booting -~~~~~~~ - -First some information about the command-line options. There is only one -option specific to kmemcheck, and this is called "kmemcheck". It can be used -to override the default mode as chosen by the ``CONFIG_KMEMCHECK_*_BY_DEFAULT`` -option. Its possible settings are: - -- ``kmemcheck=0`` (disabled) -- ``kmemcheck=1`` (enabled) -- ``kmemcheck=2`` (one-shot mode) - -If SLUB debugging has been enabled in the kernel, it may take precedence over -kmemcheck in such a way that the slab caches which are under SLUB debugging -will not be tracked by kmemcheck. In order to ensure that this doesn't happen -(even though it shouldn't by default), use SLUB's boot option ``slub_debug``, -like this: ``slub_debug=-`` - -In fact, this option may also be used for fine-grained control over SLUB vs. -kmemcheck. For example, if the command line includes -``kmemcheck=1 slub_debug=,dentry``, then SLUB debugging will be used only -for the "dentry" slab cache, and with kmemcheck tracking all the other -caches. This is advanced usage, however, and is not generally recommended. - - -Run-time enable/disable -~~~~~~~~~~~~~~~~~~~~~~~ - -When the kernel has booted, it is possible to enable or disable kmemcheck at -run-time. WARNING: This feature is still experimental and may cause false -positive warnings to appear. Therefore, try not to use this. If you find that -it doesn't work properly (e.g. you see an unreasonable amount of warnings), I -will be happy to take bug reports. - -Use the file ``/proc/sys/kernel/kmemcheck`` for this purpose, e.g.:: - - $ echo 0 > /proc/sys/kernel/kmemcheck # disables kmemcheck - -The numbers are the same as for the ``kmemcheck=`` command-line option. - - -Debugging -~~~~~~~~~ - -A typical report will look something like this:: - - WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024) - 80000000000000000000000000000000000000000088ffff0000000000000000 - i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u - ^ - - Pid: 1856, comm: ntpdate Not tainted 2.6.29-rc5 #264 945P-A - RIP: 0010:[] [] __dequeue_signal+0xc8/0x190 - RSP: 0018:ffff88003cdf7d98 EFLAGS: 00210002 - RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009 - RDX: ffff88003e5d6018 RSI: ffff88003e5d6024 RDI: ffff88003cdf7e84 - RBP: ffff88003cdf7db8 R08: ffff88003e5d6000 R09: 0000000000000000 - R10: 0000000000000080 R11: 0000000000000000 R12: 000000000000000e - R13: ffff88003cdf7e78 R14: ffff88003d530710 R15: ffff88003d5a98c8 - FS: 0000000000000000(0000) GS:ffff880001982000(0063) knlGS:00000 - CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 - CR2: ffff88003f806ea0 CR3: 000000003c036000 CR4: 00000000000006a0 - DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 - DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 - [] dequeue_signal+0x8e/0x170 - [] get_signal_to_deliver+0x98/0x390 - [] do_notify_resume+0xad/0x7d0 - [] int_signal+0x12/0x17 - [] 0xffffffffffffffff - -The single most valuable information in this report is the RIP (or EIP on 32- -bit) value. This will help us pinpoint exactly which instruction that caused -the warning. - -If your kernel was compiled with ``CONFIG_DEBUG_INFO=y``, then all we have to do -is give this address to the addr2line program, like this:: - - $ addr2line -e vmlinux -i ffffffff8104ede8 - arch/x86/include/asm/string_64.h:12 - include/asm-generic/siginfo.h:287 - kernel/signal.c:380 - kernel/signal.c:410 - -The "``-e vmlinux``" tells addr2line which file to look in. **IMPORTANT:** -This must be the vmlinux of the kernel that produced the warning in the -first place! If not, the line number information will almost certainly be -wrong. - -The "``-i``" tells addr2line to also print the line numbers of inlined -functions. In this case, the flag was very important, because otherwise, -it would only have printed the first line, which is just a call to -``memcpy()``, which could be called from a thousand places in the kernel, and -is therefore not very useful. These inlined functions would not show up in -the stack trace above, simply because the kernel doesn't load the extra -debugging information. This technique can of course be used with ordinary -kernel oopses as well. - -In this case, it's the caller of ``memcpy()`` that is interesting, and it can be -found in ``include/asm-generic/siginfo.h``, line 287:: - - 281 static inline void copy_siginfo(struct siginfo *to, struct siginfo *from) - 282 { - 283 if (from->si_code < 0) - 284 memcpy(to, from, sizeof(*to)); - 285 else - 286 /* _sigchld is currently the largest know union member */ - 287 memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld)); - 288 } - -Since this was a read (kmemcheck usually warns about reads only, though it can -warn about writes to unallocated or freed memory as well), it was probably the -"from" argument which contained some uninitialized bytes. Following the chain -of calls, we move upwards to see where "from" was allocated or initialized, -``kernel/signal.c``, line 380:: - - 359 static void collect_signal(int sig, struct sigpending *list, siginfo_t *info) - 360 { - ... - 367 list_for_each_entry(q, &list->list, list) { - 368 if (q->info.si_signo == sig) { - 369 if (first) - 370 goto still_pending; - 371 first = q; - ... - 377 if (first) { - 378 still_pending: - 379 list_del_init(&first->list); - 380 copy_siginfo(info, &first->info); - 381 __sigqueue_free(first); - ... - 392 } - 393 } - -Here, it is ``&first->info`` that is being passed on to ``copy_siginfo()``. The -variable ``first`` was found on a list -- passed in as the second argument to -``collect_signal()``. We continue our journey through the stack, to figure out -where the item on "list" was allocated or initialized. We move to line 410:: - - 395 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask, - 396 siginfo_t *info) - 397 { - ... - 410 collect_signal(sig, pending, info); - ... - 414 } - -Now we need to follow the ``pending`` pointer, since that is being passed on to -``collect_signal()`` as ``list``. At this point, we've run out of lines from the -"addr2line" output. Not to worry, we just paste the next addresses from the -kmemcheck stack dump, i.e.:: - - [] dequeue_signal+0x8e/0x170 - [] get_signal_to_deliver+0x98/0x390 - [] do_notify_resume+0xad/0x7d0 - [] int_signal+0x12/0x17 - - $ addr2line -e vmlinux -i ffffffff8104f04e ffffffff81050bd8 \ - ffffffff8100b87d ffffffff8100c7b5 - kernel/signal.c:446 - kernel/signal.c:1806 - arch/x86/kernel/signal.c:805 - arch/x86/kernel/signal.c:871 - arch/x86/kernel/entry_64.S:694 - -Remember that since these addresses were found on the stack and not as the -RIP value, they actually point to the _next_ instruction (they are return -addresses). This becomes obvious when we look at the code for line 446:: - - 422 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info) - 423 { - ... - 431 signr = __dequeue_signal(&tsk->signal->shared_pending, - 432 mask, info); - 433 /* - 434 * itimer signal ? - 435 * - 436 * itimers are process shared and we restart periodic - 437 * itimers in the signal delivery path to prevent DoS - 438 * attacks in the high resolution timer case. This is - 439 * compliant with the old way of self restarting - 440 * itimers, as the SIGALRM is a legacy signal and only - 441 * queued once. Changing the restart behaviour to - 442 * restart the timer in the signal dequeue path is - 443 * reducing the timer noise on heavy loaded !highres - 444 * systems too. - 445 */ - 446 if (unlikely(signr == SIGALRM)) { - ... - 489 } - -So instead of looking at 446, we should be looking at 431, which is the line -that executes just before 446. Here we see that what we are looking for is -``&tsk->signal->shared_pending``. - -Our next task is now to figure out which function that puts items on this -``shared_pending`` list. A crude, but efficient tool, is ``git grep``:: - - $ git grep -n 'shared_pending' kernel/ - ... - kernel/signal.c:828: pending = group ? &t->signal->shared_pending : &t->pending; - kernel/signal.c:1339: pending = group ? &t->signal->shared_pending : &t->pending; - ... - -There were more results, but none of them were related to list operations, -and these were the only assignments. We inspect the line numbers more closely -and find that this is indeed where items are being added to the list:: - - 816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t, - 817 int group) - 818 { - ... - 828 pending = group ? &t->signal->shared_pending : &t->pending; - ... - 851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN && - 852 (is_si_special(info) || - 853 info->si_code >= 0))); - 854 if (q) { - 855 list_add_tail(&q->list, &pending->list); - ... - 890 } - -and:: - - 1309 int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group) - 1310 { - .... - 1339 pending = group ? &t->signal->shared_pending : &t->pending; - 1340 list_add_tail(&q->list, &pending->list); - .... - 1347 } - -In the first case, the list element we are looking for, ``q``, is being -returned from the function ``__sigqueue_alloc()``, which looks like an -allocation function. Let's take a look at it:: - - 187 static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags, - 188 int override_rlimit) - 189 { - 190 struct sigqueue *q = NULL; - 191 struct user_struct *user; - 192 - 193 /* - 194 * We won't get problems with the target's UID changing under us - 195 * because changing it requires RCU be used, and if t != current, the - 196 * caller must be holding the RCU readlock (by way of a spinlock) and - 197 * we use RCU protection here - 198 */ - 199 user = get_uid(__task_cred(t)->user); - 200 atomic_inc(&user->sigpending); - 201 if (override_rlimit || - 202 atomic_read(&user->sigpending) <= - 203 t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur) - 204 q = kmem_cache_alloc(sigqueue_cachep, flags); - 205 if (unlikely(q == NULL)) { - 206 atomic_dec(&user->sigpending); - 207 free_uid(user); - 208 } else { - 209 INIT_LIST_HEAD(&q->list); - 210 q->flags = 0; - 211 q->user = user; - 212 } - 213 - 214 return q; - 215 } - -We see that this function initializes ``q->list``, ``q->flags``, and -``q->user``. It seems that now is the time to look at the definition of -``struct sigqueue``, e.g.:: - - 14 struct sigqueue { - 15 struct list_head list; - 16 int flags; - 17 siginfo_t info; - 18 struct user_struct *user; - 19 }; - -And, you might remember, it was a ``memcpy()`` on ``&first->info`` that -caused the warning, so this makes perfect sense. It also seems reasonable -to assume that it is the caller of ``__sigqueue_alloc()`` that has the -responsibility of filling out (initializing) this member. - -But just which fields of the struct were uninitialized? Let's look at -kmemcheck's report again:: - - WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024) - 80000000000000000000000000000000000000000088ffff0000000000000000 - i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u - ^ - -These first two lines are the memory dump of the memory object itself, and -the shadow bytemap, respectively. The memory object itself is in this case -``&first->info``. Just beware that the start of this dump is NOT the start -of the object itself! The position of the caret (^) corresponds with the -address of the read (ffff88003e4a2024). - -The shadow bytemap dump legend is as follows: - -- i: initialized -- u: uninitialized -- a: unallocated (memory has been allocated by the slab layer, but has not - yet been handed off to anybody) -- f: freed (memory has been allocated by the slab layer, but has been freed - by the previous owner) - -In order to figure out where (relative to the start of the object) the -uninitialized memory was located, we have to look at the disassembly. For -that, we'll need the RIP address again:: - - RIP: 0010:[] [] __dequeue_signal+0xc8/0x190 - - $ objdump -d --no-show-raw-insn vmlinux | grep -C 8 ffffffff8104ede8: - ffffffff8104edc8: mov %r8,0x8(%r8) - ffffffff8104edcc: test %r10d,%r10d - ffffffff8104edcf: js ffffffff8104ee88 <__dequeue_signal+0x168> - ffffffff8104edd5: mov %rax,%rdx - ffffffff8104edd8: mov $0xc,%ecx - ffffffff8104eddd: mov %r13,%rdi - ffffffff8104ede0: mov $0x30,%eax - ffffffff8104ede5: mov %rdx,%rsi - ffffffff8104ede8: rep movsl %ds:(%rsi),%es:(%rdi) - ffffffff8104edea: test $0x2,%al - ffffffff8104edec: je ffffffff8104edf0 <__dequeue_signal+0xd0> - ffffffff8104edee: movsw %ds:(%rsi),%es:(%rdi) - ffffffff8104edf0: test $0x1,%al - ffffffff8104edf2: je ffffffff8104edf5 <__dequeue_signal+0xd5> - ffffffff8104edf4: movsb %ds:(%rsi),%es:(%rdi) - ffffffff8104edf5: mov %r8,%rdi - ffffffff8104edf8: callq ffffffff8104de60 <__sigqueue_free> - -As expected, it's the "``rep movsl``" instruction from the ``memcpy()`` -that causes the warning. We know about ``REP MOVSL`` that it uses the register -``RCX`` to count the number of remaining iterations. By taking a look at the -register dump again (from the kmemcheck report), we can figure out how many -bytes were left to copy:: - - RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009 - -By looking at the disassembly, we also see that ``%ecx`` is being loaded -with the value ``$0xc`` just before (ffffffff8104edd8), so we are very -lucky. Keep in mind that this is the number of iterations, not bytes. And -since this is a "long" operation, we need to multiply by 4 to get the -number of bytes. So this means that the uninitialized value was encountered -at 4 * (0xc - 0x9) = 12 bytes from the start of the object. - -We can now try to figure out which field of the "``struct siginfo``" that -was not initialized. This is the beginning of the struct:: - - 40 typedef struct siginfo { - 41 int si_signo; - 42 int si_errno; - 43 int si_code; - 44 - 45 union { - .. - 92 } _sifields; - 93 } siginfo_t; - -On 64-bit, the int is 4 bytes long, so it must the union member that has -not been initialized. We can verify this using gdb:: - - $ gdb vmlinux - ... - (gdb) p &((struct siginfo *) 0)->_sifields - $1 = (union {...} *) 0x10 - -Actually, it seems that the union member is located at offset 0x10 -- which -means that gcc has inserted 4 bytes of padding between the members ``si_code`` -and ``_sifields``. We can now get a fuller picture of the memory dump:: - - _----------------------------=> si_code - / _--------------------=> (padding) - | / _------------=> _sifields(._kill._pid) - | | / _----=> _sifields(._kill._uid) - | | | / - -------|-------|-------|-------| - 80000000000000000000000000000000000000000088ffff0000000000000000 - i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u - -This allows us to realize another important fact: ``si_code`` contains the -value 0x80. Remember that x86 is little endian, so the first 4 bytes -"80000000" are really the number 0x00000080. With a bit of research, we -find that this is actually the constant ``SI_KERNEL`` defined in -``include/asm-generic/siginfo.h``:: - - 144 #define SI_KERNEL 0x80 /* sent by the kernel from somewhere */ - -This macro is used in exactly one place in the x86 kernel: In ``send_signal()`` -in ``kernel/signal.c``:: - - 816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t, - 817 int group) - 818 { - ... - 828 pending = group ? &t->signal->shared_pending : &t->pending; - ... - 851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN && - 852 (is_si_special(info) || - 853 info->si_code >= 0))); - 854 if (q) { - 855 list_add_tail(&q->list, &pending->list); - 856 switch ((unsigned long) info) { - ... - 865 case (unsigned long) SEND_SIG_PRIV: - 866 q->info.si_signo = sig; - 867 q->info.si_errno = 0; - 868 q->info.si_code = SI_KERNEL; - 869 q->info.si_pid = 0; - 870 q->info.si_uid = 0; - 871 break; - ... - 890 } - -Not only does this match with the ``.si_code`` member, it also matches the place -we found earlier when looking for where siginfo_t objects are enqueued on the -``shared_pending`` list. - -So to sum up: It seems that it is the padding introduced by the compiler -between two struct fields that is uninitialized, and this gets reported when -we do a ``memcpy()`` on the struct. This means that we have identified a false -positive warning. - -Normally, kmemcheck will not report uninitialized accesses in ``memcpy()`` calls -when both the source and destination addresses are tracked. (Instead, we copy -the shadow bytemap as well). In this case, the destination address clearly -was not tracked. We can dig a little deeper into the stack trace from above:: - - arch/x86/kernel/signal.c:805 - arch/x86/kernel/signal.c:871 - arch/x86/kernel/entry_64.S:694 - -And we clearly see that the destination siginfo object is located on the -stack:: - - 782 static void do_signal(struct pt_regs *regs) - 783 { - 784 struct k_sigaction ka; - 785 siginfo_t info; - ... - 804 signr = get_signal_to_deliver(&info, &ka, regs, NULL); - ... - 854 } - -And this ``&info`` is what eventually gets passed to ``copy_siginfo()`` as the -destination argument. - -Now, even though we didn't find an actual error here, the example is still a -good one, because it shows how one would go about to find out what the report -was all about. - - -Annotating false positives -~~~~~~~~~~~~~~~~~~~~~~~~~~ - -There are a few different ways to make annotations in the source code that -will keep kmemcheck from checking and reporting certain allocations. Here -they are: - -- ``__GFP_NOTRACK_FALSE_POSITIVE`` - This flag can be passed to ``kmalloc()`` or ``kmem_cache_alloc()`` - (therefore also to other functions that end up calling one of - these) to indicate that the allocation should not be tracked - because it would lead to a false positive report. This is a "big - hammer" way of silencing kmemcheck; after all, even if the false - positive pertains to particular field in a struct, for example, we - will now lose the ability to find (real) errors in other parts of - the same struct. - - Example:: - - /* No warnings will ever trigger on accessing any part of x */ - x = kmalloc(sizeof *x, GFP_KERNEL | __GFP_NOTRACK_FALSE_POSITIVE); - -- ``kmemcheck_bitfield_begin(name)``/``kmemcheck_bitfield_end(name)`` and - ``kmemcheck_annotate_bitfield(ptr, name)`` - The first two of these three macros can be used inside struct - definitions to signal, respectively, the beginning and end of a - bitfield. Additionally, this will assign the bitfield a name, which - is given as an argument to the macros. - - Having used these markers, one can later use - kmemcheck_annotate_bitfield() at the point of allocation, to indicate - which parts of the allocation is part of a bitfield. - - Example:: - - struct foo { - int x; - - kmemcheck_bitfield_begin(flags); - int flag_a:1; - int flag_b:1; - kmemcheck_bitfield_end(flags); - - int y; - }; - - struct foo *x = kmalloc(sizeof *x); - - /* No warnings will trigger on accessing the bitfield of x */ - kmemcheck_annotate_bitfield(x, flags); - - Note that ``kmemcheck_annotate_bitfield()`` can be used even before the - return value of ``kmalloc()`` is checked -- in other words, passing NULL - as the first argument is legal (and will do nothing). - - -Reporting errors ----------------- - -As we have seen, kmemcheck will produce false positive reports. Therefore, it -is not very wise to blindly post kmemcheck warnings to mailing lists and -maintainers. Instead, I encourage maintainers and developers to find errors -in their own code. If you get a warning, you can try to work around it, try -to figure out if it's a real error or not, or simply ignore it. Most -developers know their own code and will quickly and efficiently determine the -root cause of a kmemcheck report. This is therefore also the most efficient -way to work with kmemcheck. - -That said, we (the kmemcheck maintainers) will always be on the lookout for -false positives that we can annotate and silence. So whatever you find, -please drop us a note privately! Kernel configs and steps to reproduce (if -available) are of course a great help too. - -Happy hacking! - - -Technical description ---------------------- - -kmemcheck works by marking memory pages non-present. This means that whenever -somebody attempts to access the page, a page fault is generated. The page -fault handler notices that the page was in fact only hidden, and so it calls -on the kmemcheck code to make further investigations. - -When the investigations are completed, kmemcheck "shows" the page by marking -it present (as it would be under normal circumstances). This way, the -interrupted code can continue as usual. - -But after the instruction has been executed, we should hide the page again, so -that we can catch the next access too! Now kmemcheck makes use of a debugging -feature of the processor, namely single-stepping. When the processor has -finished the one instruction that generated the memory access, a debug -exception is raised. From here, we simply hide the page again and continue -execution, this time with the single-stepping feature turned off. - -kmemcheck requires some assistance from the memory allocator in order to work. -The memory allocator needs to - - 1. Tell kmemcheck about newly allocated pages and pages that are about to - be freed. This allows kmemcheck to set up and tear down the shadow memory - for the pages in question. The shadow memory stores the status of each - byte in the allocation proper, e.g. whether it is initialized or - uninitialized. - - 2. Tell kmemcheck which parts of memory should be marked uninitialized. - There are actually a few more states, such as "not yet allocated" and - "recently freed". - -If a slab cache is set up using the SLAB_NOTRACK flag, it will never return -memory that can take page faults because of kmemcheck. - -If a slab cache is NOT set up using the SLAB_NOTRACK flag, callers can still -request memory with the __GFP_NOTRACK or __GFP_NOTRACK_FALSE_POSITIVE flags. -This does not prevent the page faults from occurring, however, but marks the -object in question as being initialized so that no warnings will ever be -produced for this object. - -Currently, the SLAB and SLUB allocators are supported by kmemcheck. diff --git a/Documentation/devicetree/bindings/arm/actions.txt b/Documentation/devicetree/bindings/arm/actions.txt index 3bc7ea575564c001352b0213c735d172bc84d471..ced764a8549e9be45a71f416670e45c6006d0377 100644 --- a/Documentation/devicetree/bindings/arm/actions.txt +++ b/Documentation/devicetree/bindings/arm/actions.txt @@ -21,6 +21,7 @@ Boards: Root node property compatible must contain, depending on board: + - Cubietech CubieBoard6: "cubietech,cubieboard6" - LeMaker Guitar Base Board rev. B: "lemaker,guitar-bb-rev-b", "lemaker,guitar" diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 4e4bc0bae597ad27b488a74c7b83762e7cb51a88..f747f47922c55dfabdf56a2ba3db6bbf1d704816 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -41,6 +41,10 @@ Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: Required root node property: compatible: "amlogic,s912", "amlogic,meson-gxm"; +Boards with the Amlogic Meson AXG A113D SoC shall have the following properties: + Required root node property: + compatible: "amlogic,a113d", "amlogic,meson-axg"; + Board compatible values (alphabetically, grouped by SoC): - "geniatech,atv1200" (Meson6) @@ -71,8 +75,12 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,q200" (Meson gxm s912) - "amlogic,q201" (Meson gxm s912) + - "khadas,vim2" (Meson gxm s912) - "kingnovel,r-box-pro" (Meson gxm S912) - "nexbox,a1" (Meson gxm s912) + - "tronsmart,vega-s96" (Meson gxm s912) + + - "amlogic,s400" (Meson axg a113d) Amlogic Meson Firmware registers Interface ------------------------------------------ diff --git a/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt new file mode 100644 index 0000000000000000000000000000000000000000..101dc21014ece985dc8d33921769f0ab924023e0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt @@ -0,0 +1,20 @@ +Amlogic Meson8 and Meson8b "analog top" registers: +-------------------------------------------------- + +The analog top registers contain information about the so-called +"metal revision" (which encodes the "minor version") of the SoC. + +Required properties: +- reg: the register range of the analog top registers +- compatible: depending on the SoC this should be one of: + - "amlogic,meson8-analog-top" + - "amlogic,meson8b-analog-top" + along with "syscon" + + +Example: + + analog_top: analog-top@81a8 { + compatible = "amlogic,meson8-analog-top", "syscon"; + reg = <0x81a8 0x14>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/assist.txt b/Documentation/devicetree/bindings/arm/amlogic/assist.txt new file mode 100644 index 0000000000000000000000000000000000000000..7656812b67b9dbfa9b51a5d06e70274101bad1d0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/assist.txt @@ -0,0 +1,17 @@ +Amlogic Meson6/Meson8/Meson8b assist registers: +----------------------------------------------- + +The assist registers contain basic information about the SoC, +for example the encoded SoC part number. + +Required properties: +- reg: the register range of the assist registers +- compatible: should be "amlogic,meson-mx-assist" along with "syscon" + + +Example: + + assist: assist@7c00 { + compatible = "amlogic,meson-mx-assist", "syscon"; + reg = <0x7c00 0x200>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt new file mode 100644 index 0000000000000000000000000000000000000000..407e27f230aba202619ffd077b8e0cf70f9ce3b0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt @@ -0,0 +1,17 @@ +Amlogic Meson6/Meson8/Meson8b bootrom: +-------------------------------------- + +The bootrom register area can be used to access SoC specific +information, such as the "misc version". + +Required properties: +- reg: the register range of the bootrom registers +- compatible: should be "amlogic,meson-mx-bootrom" along with "syscon" + + +Example: + + bootrom: bootrom@d9040000 { + compatible = "amlogic,meson-mx-bootrom", "syscon"; + reg = <0xd9040000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/pmu.txt b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt new file mode 100644 index 0000000000000000000000000000000000000000..72f8d08198b6fbf4b826e0457a62b84f2251879f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt @@ -0,0 +1,18 @@ +Amlogic Meson8 and Meson8b power-management-unit: +------------------------------------------------- + +The pmu is used to turn off and on different power domains of the SoCs +This includes the power to the CPU cores. + +Required node properties: +- compatible value : depending on the SoC this should be one of: + "amlogic,meson8-pmu" + "amlogic,meson8b-pmu" +- reg : physical base address and the size of the registers window + +Example: + + pmu@c81000e4 { + compatible = "amlogic,meson8b-pmu", "syscon"; + reg = <0xc81000e0 0x18>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt b/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt new file mode 100644 index 0000000000000000000000000000000000000000..3473ddaadfac2c19c8feeb603752de054d98598f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt @@ -0,0 +1,32 @@ +Amlogic Meson8 and Meson8b SRAM for smp bringup: +------------------------------------------------ + +Amlogic's SMP-capable SoCs use part of the sram for the bringup of the cores. +Once the core gets powered up it executes the code that is residing at a +specific location. + +Therefore a reserved section sub-node has to be added to the mmio-sram +declaration. + +Required sub-node properties: +- compatible : depending on the SoC this should be one of: + "amlogic,meson8-smp-sram" + "amlogic,meson8b-smp-sram" + +The rest of the properties should follow the generic mmio-sram discription +found in ../../misc/sram.txt + +Example: + + sram: sram@d9000000 { + compatible = "mmio-sram"; + reg = <0xd9000000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xd9000000 0x20000>; + + smp-sram@1ff80 { + compatible = "amlogic,meson8b-smp-sram"; + reg = <0x1ff80 0x8>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt index 0d0c1ae81bedfd4ae07fb746b0b51faedb589a0f..790e6b0b83065688df09bae883cdc401dc483f64 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt @@ -164,6 +164,8 @@ Control registers for this memory controller's DDR PHY. Required properties: - compatible : should contain one of these + "brcm,brcmstb-ddr-phy-v71.1" + "brcm,brcmstb-ddr-phy-v72.0" "brcm,brcmstb-ddr-phy-v225.1" "brcm,brcmstb-ddr-phy-v240.1" "brcm,brcmstb-ddr-phy-v240.2" @@ -184,7 +186,9 @@ Sequencer DRAM parameters and control registers. Used for Self-Refresh Power-Down (SRPD), among other things. Required properties: -- compatible : should contain "brcm,brcmstb-memc-ddr" +- compatible : should contain one of these + "brcm,brcmstb-memc-ddr-rev-b.2.2" + "brcm,brcmstb-memc-ddr" - reg : the MEMC DDR register range Example: diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt new file mode 100644 index 0000000000000000000000000000000000000000..a124c7fc4dcdc25b4f61925e5fd6f5e10533d89f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt @@ -0,0 +1,14 @@ +Broadcom Hurricane 2 device tree bindings +--------------------------------------- + +Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs +are based on Broadcom's iProc SoC architecture and feature a single core Cortex +A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND +flash and a PCIe attached integrated switching engine. + +Boards with Hurricane SoCs shall have the following properties: + +Required root node property: + +BCM53342 +compatible = "brcm,bcm53342", "brcm,hr2"; diff --git a/Documentation/devicetree/bindings/arm/ccn.txt b/Documentation/devicetree/bindings/arm/ccn.txt index 29801456c9ee9a3701481d8c57cc149df2c312d2..43b5a71a5a9dde70aeebc38510e5a478e1d8d742 100644 --- a/Documentation/devicetree/bindings/arm/ccn.txt +++ b/Documentation/devicetree/bindings/arm/ccn.txt @@ -15,7 +15,7 @@ Required properties: Example: - ccn@0x2000000000 { + ccn@2000000000 { compatible = "arm,ccn-504"; reg = <0x20 0x00000000 0 0x1000000>; interrupts = <0 181 4>; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index b92f12bd5244a7e6fe911f8000f7a37e499e0e40..a0009b72e9be00f767f0c338c3469bdbe685361f 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -197,6 +197,8 @@ described below. "actions,s500-smp" "allwinner,sun6i-a31" "allwinner,sun8i-a23" + "amlogic,meson8-smp" + "amlogic,meson8b-smp" "arm,realview-smp" "brcm,bcm11351-cpu-method" "brcm,bcm23550" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index cd977db7630c50a6e118e60edd96256efa138ac9..b404d592ce58a6f129b6d652482b85c2ebbab21f 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -7,7 +7,9 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-apmixedsys" + - "mediatek,mt2712-apmixedsys", "syscon" - "mediatek,mt6797-apmixedsys" + - "mediatek,mt7622-apmixedsys" - "mediatek,mt8135-apmixedsys" - "mediatek,mt8173-apmixedsys" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt new file mode 100644 index 0000000000000000000000000000000000000000..9b8f578d5e197847c949c5d1afd86fde54d871a2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt @@ -0,0 +1,22 @@ +MediaTek AUDSYS controller +============================ + +The MediaTek AUDSYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt7622-audsys", "syscon" +- #clock-cells: Must be 1 + +The AUDSYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +audsys: audsys@11220000 { + compatible = "mediatek,mt7622-audsys", "syscon"; + reg = <0 0x11220000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt index 4137196dd686fc0648d3a785c2b3462ac47c11cd..4010e37c53a0218554edfb5885262a168ba73108 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-bdpsys", "syscon" + - "mediatek,mt2712-bdpsys", "syscon" - #clock-cells: Must be 1 The bdpsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt index 768f3a5bc05521a6bd3bc34e1b7311f2366e794f..7aa3fa167668f424464f8f9fe12078ea08f0bc0b 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-ethsys", "syscon" + - "mediatek,mt7622-ethsys", "syscon" - #clock-cells: Must be 1 The ethsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt index beed7b594ceaab959185f97acfa6feff7a7e2e55..f5629d64cef2d2dfa218dabb7646abd50b135a08 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-hifsys", "syscon" + - "mediatek,mt7622-hifsys", "syscon" - #clock-cells: Must be 1 The hifsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt index 047b11ae5f45c0a7e020a231a4e87ce656b3842e..868bd51a98befcb5d901bf67995525e9dceb8173 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-imgsys", "syscon" + - "mediatek,mt2712-imgsys", "syscon" - "mediatek,mt6797-imgsys", "syscon" - "mediatek,mt8173-imgsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index 58d58e2006b83324502d3d39739ab6537552649b..566f153f9f83b29ef7677ea7cd8412486e4154d4 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -8,7 +8,9 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-infracfg", "syscon" + - "mediatek,mt2712-infracfg", "syscon" - "mediatek,mt6797-infracfg", "syscon" + - "mediatek,mt7622-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt new file mode 100644 index 0000000000000000000000000000000000000000..2df799cd06a742a0b8d1186c296c5c8d7c618baf --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt @@ -0,0 +1,22 @@ +Mediatek jpgdecsys controller +============================ + +The Mediatek jpgdecsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt2712-jpgdecsys", "syscon" +- #clock-cells: Must be 1 + +The jpgdecsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +jpgdecsys: syscon@19000000 { + compatible = "mediatek,mt2712-jpgdecsys", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt new file mode 100644 index 0000000000000000000000000000000000000000..b8fb03f3613e39123a1b94270850c4b481b7d172 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt @@ -0,0 +1,22 @@ +Mediatek mcucfg controller +============================ + +The Mediatek mcucfg controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt2712-mcucfg", "syscon" +- #clock-cells: Must be 1 + +The mcucfg controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +mcucfg: syscon@10220000 { + compatible = "mediatek,mt2712-mcucfg", "syscon"; + reg = <0 0x10220000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt new file mode 100644 index 0000000000000000000000000000000000000000..859e67b416d5006ae2851b80352e32493f9c4c7b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt @@ -0,0 +1,22 @@ +Mediatek mfgcfg controller +============================ + +The Mediatek mfgcfg controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt2712-mfgcfg", "syscon" +- #clock-cells: Must be 1 + +The mfgcfg controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +mfgcfg: syscon@13000000 { + compatible = "mediatek,mt2712-mfgcfg", "syscon"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index 70529e0b58e9a15927a552ada8106434c1627100..4eb8bbe15c01cd4828a75a9acb1d8913e231e515 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-mmsys", "syscon" + - "mediatek,mt2712-mmsys", "syscon" - "mediatek,mt6797-mmsys", "syscon" - "mediatek,mt8173-mmsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt new file mode 100644 index 0000000000000000000000000000000000000000..d5d5f122766523a802226fe123946d4518b37d1a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt @@ -0,0 +1,22 @@ +MediaTek PCIESYS controller +============================ + +The MediaTek PCIESYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-pciesys", "syscon" +- #clock-cells: Must be 1 + +The PCIESYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +pciesys: pciesys@1a100800 { + compatible = "mediatek,mt7622-pciesys", "syscon"; + reg = <0 0x1a100800 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt index e494366782aaf79e1a092be3dd701dd2c22b5a37..fb58ca8c2770b5924baf3b624fb6828260553a0d 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -8,6 +8,8 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-pericfg", "syscon" + - "mediatek,mt2712-pericfg", "syscon" + - "mediatek,mt7622-pericfg", "syscon" - "mediatek,mt8135-pericfg", "syscon" - "mediatek,mt8173-pericfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt new file mode 100644 index 0000000000000000000000000000000000000000..d113b8e741f30aefbe67fc58b1025aaa2988b13b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt @@ -0,0 +1,22 @@ +MediaTek SGMIISYS controller +============================ + +The MediaTek SGMIISYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-sgmiisys", "syscon" +- #clock-cells: Must be 1 + +The SGMIISYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +sgmiisys: sgmiisys@1b128000 { + compatible = "mediatek,mt7622-sgmiisys", "syscon"; + reg = <0 0x1b128000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt new file mode 100644 index 0000000000000000000000000000000000000000..00760019da00c519c5e2a8795781f20fe910ee63 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt @@ -0,0 +1,22 @@ +MediaTek SSUSBSYS controller +============================ + +The MediaTek SSUSBSYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-ssusbsys", "syscon" +- #clock-cells: Must be 1 + +The SSUSBSYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +ssusbsys: ssusbsys@1a000000 { + compatible = "mediatek,mt7622-ssusbsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index ec93ecbb9f3c2fb72bf461d8d57275d8c57ac79a..24014a7e2332370202fcbf2ffc31ede87df571f8 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -7,7 +7,9 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-topckgen" + - "mediatek,mt2712-topckgen", "syscon" - "mediatek,mt6797-topckgen" + - "mediatek,mt7622-topckgen" - "mediatek,mt8135-topckgen" - "mediatek,mt8173-topckgen" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt index d150104f928a4f7c023a724a3e646eb11b49d83a..ea40d05089f8306b2b15e2b0cd304ef61b8f8602 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-vdecsys", "syscon" + - "mediatek,mt2712-vdecsys", "syscon" - "mediatek,mt6797-vdecsys", "syscon" - "mediatek,mt8173-vdecsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt index 8a93be643647d429c39ba3c978e6e1a02f94d1c4..851545357e94af7f3ec4a96ac882cded0d166d7e 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt @@ -6,6 +6,7 @@ The Mediatek vencsys controller provides various clocks to the system. Required Properties: - compatible: Should be one of: + - "mediatek,mt2712-vencsys", "syscon" - "mediatek,mt6797-vencsys", "syscon" - "mediatek,mt8173-vencsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt index bb5727ae004ac287c6725d53ef6a4b90a9e41480..ecb360ed0e332b70a84cb139eba8fd16ca847145 100644 --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt @@ -49,7 +49,7 @@ An interrupt consumer on an SoC using crossbar will use: interrupts = Example: - device_x@0x4a023000 { + device_x@4a023000 { /* Crossbar 8 used */ interrupts = ; ... diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt index 3a4e5901ce31b0b8f12324f05951876fb4311c7d..ce8dabf8c0f97ce61a7c5f328acbd09c87b94a04 100644 --- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt +++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt @@ -21,6 +21,8 @@ Required properties: "ti,omap3-scm" "ti,omap4-scm-core" "ti,omap4-scm-padconf-core" + "ti,omap4-scm-wkup" + "ti,omap4-scm-padconf-wkup" "ti,omap5-scm-core" "ti,omap5-scm-padconf-core" "ti,dra7-scm-core" diff --git a/Documentation/devicetree/bindings/arm/realtek.txt b/Documentation/devicetree/bindings/arm/realtek.txt index 13d755787b4fd1c7f1664692146f71451dc00648..95839e19ae9267857589a48e6c3676187ebf1677 100644 --- a/Documentation/devicetree/bindings/arm/realtek.txt +++ b/Documentation/devicetree/bindings/arm/realtek.txt @@ -12,6 +12,8 @@ Required root node properties: Root node property compatible must contain, depending on board: + - MeLE V9: "mele,v9" + - ProBox2 AVA: "probox2,ava" - Zidoo X9S: "zidoo,x9s" diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index b003148e2945129ef834feacb5b198813195484e..326d24bca1a993afd724ce69720eb44814f44e68 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -1,5 +1,9 @@ Rockchip platforms device tree bindings --------------------------------------- +- Amarula Vyasa RK3288 board + Required root node properties: + - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; + - Asus Tinker board Required root node properties: - compatible = "asus,rk3288-tinker", "rockchip,rk3288"; diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index 088584a98cf4b3ec635026ec4905b9d866f1935d..779f5614bceeb336cdf16352f182ad57d7fbcab7 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -4,7 +4,6 @@ Properties: - compatible : should contain two values. First value must be one from following list: - "samsung,exynos3250-pmu" - for Exynos3250 SoC, - "samsung,exynos4210-pmu" - for Exynos4210 SoC, - - "samsung,exynos4212-pmu" - for Exynos4212 SoC, - "samsung,exynos4412-pmu" - for Exynos4412 SoC, - "samsung,exynos5250-pmu" - for Exynos5250 SoC, - "samsung,exynos5260-pmu" - for Exynos5260 SoC. diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index fa674818e7e8e14178fc8f1da6db5f7d16df7e31..e13459618581d9cbb4c5ac7c1b6f71b701a1f116 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -57,6 +57,7 @@ Required root node properties: - "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel Odroid XU3 Lite board. - "hardkernel,odroid-xu4" - for Exynos5422-based Hardkernel Odroid XU4. + - "hardkernel,odroid-hc1" - for Exynos5422-based Hardkernel Odroid HC1. * Insignal - "insignal,arndale" - for Exynos5250-based Insignal Arndale board. diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index ae75cb3b1331f82782c95a814d3a6bbda3f63857..020d758fc0c535d20d4dd74b1fc5d5998dce7225 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -39,6 +39,8 @@ SoCs: compatible = "renesas,r8a7795" - R-Car M3-W (R8A77960) compatible = "renesas,r8a7796" + - R-Car V3M (R8A77970) + compatible = "renesas,r8a77970" - R-Car D3 (R8A77995) compatible = "renesas,r8a77995" @@ -57,6 +59,8 @@ Boards: compatible = "renesas,bockw", "renesas,r8a7778" - Draak (RTP0RC77995SEB0010S) compatible = "renesas,draak", "renesas,r8a77995" + - Eagle (RTP0RC77970SEB0010S) + compatible = "renesas,eagle", "renesas,r8a77970" - Genmai (RTK772100BC00000BR) compatible = "renesas,genmai", "renesas,r7s72100" - GR-Peach (X28A-M01-E/F) @@ -65,7 +69,7 @@ Boards: compatible = "renesas,gose", "renesas,r8a7793" - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1)) H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0)) - compatible = "renesas,h3ulcb", "renesas,r8a7795"; + compatible = "renesas,h3ulcb", "renesas,r8a7795" - Henninger compatible = "renesas,henninger", "renesas,r8a7791" - iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D) @@ -76,6 +80,8 @@ Boards: compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743" - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) compatible = "iwave,g20m", "renesas,r8a7743" + - Kingfisher (SBEV-RCAR-KF-M03) + compatible = "shimafuji,kingfisher" - Koelsch (RTP0RC7791SEB00010S) compatible = "renesas,koelsch", "renesas,r8a7791" - Kyoto Microcomputer Co. KZM-A9-Dual @@ -85,7 +91,7 @@ Boards: - Lager (RTP0RC7790SEB00010S) compatible = "renesas,lager", "renesas,r8a7790" - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) - compatible = "renesas,m3ulcb", "renesas,r8a7796"; + compatible = "renesas,m3ulcb", "renesas,r8a7796" - Marzen (R0P7779A00010S) compatible = "renesas,marzen", "renesas,r8a7779" - Porter (M2-LCDP) @@ -93,11 +99,11 @@ Boards: - RSKRZA1 (YR0K77210C000BE) compatible = "renesas,rskrza1", "renesas,r7s72100" - Salvator-X (RTP0RC7795SIPB0010S) - compatible = "renesas,salvator-x", "renesas,r8a7795"; + compatible = "renesas,salvator-x", "renesas,r8a7795" - Salvator-X (RTP0RC7796SIPB0011S) - compatible = "renesas,salvator-x", "renesas,r8a7796"; + compatible = "renesas,salvator-x", "renesas,r8a7796" - Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S) - compatible = "renesas,salvator-xs", "renesas,r8a7795"; + compatible = "renesas,salvator-xs", "renesas,r8a7795" - SILK (RTP0RC7794LCB00011S) compatible = "renesas,silk", "renesas,r8a7794" - SK-RZG1E (YR8A77450S000BE) diff --git a/Documentation/devicetree/bindings/arm/spe-pmu.txt b/Documentation/devicetree/bindings/arm/spe-pmu.txt new file mode 100644 index 0000000000000000000000000000000000000000..93372f2a7df92c1f7e957b549916b52505d6e710 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/spe-pmu.txt @@ -0,0 +1,20 @@ +* ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU) + +ARMv8.2 introduces the optional Statistical Profiling Extension for collecting +performance sample data using an in-memory trace buffer. + +** SPE Required properties: + +- compatible : should be one of: + "arm,statistical-profiling-extension-v1" + +- interrupts : Exactly 1 PPI must be listed. For heterogeneous systems where + SPE is only supported on a subset of the CPUs, please consult + the arm,gic-v3 binding for details on describing a PPI partition. + +** Example: + +spe-pmu { + compatible = "arm,statistical-profiling-extension-v1"; + interrupts = ; +}; diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index d2c46449b4eb39fd57c75778eb2f62a080725260..e4beec3d9ad35710f6a44dec6f227dcf4b9f1622 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -14,6 +14,8 @@ using one of the following compatible strings: allwinner,sun8i-a83t allwinner,sun8i-h2-plus allwinner,sun8i-h3 + allwinner-sun8i-r40 + allwinner,sun8i-v3s allwinner,sun9i-a80 allwinner,sun50i-a64 nextthing,gr8 diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt index 866d93421eba20ba81fa66e905ecd58213636d95..f9632bacbd04aebd4ad68c46012777eb0c263204 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt @@ -8,7 +8,7 @@ Required properties: - interrupts : Should contain MC General interrupt. Example: - memory-controller@0x7000f000 { + memory-controller@7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt index 7ca8b976c13a65aa609f07f86ffc8d3f85f258f0..7561cc4de371444ac4254e6848d5febb1b6fda45 100644 --- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt +++ b/Documentation/devicetree/bindings/ata/ahci-ceva.txt @@ -5,6 +5,36 @@ Required properties: - compatible: Compatibility string. Must be 'ceva,ahci-1v84'. - clocks: Input clock specifier. Refer to common clock bindings. - interrupts: Interrupt specifier. Refer to interrupt binding. + - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0. + - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-cominit-params = /bits/ 8 ; + CINMP : COMINIT Negate Minimum Period. + CIBGN : COMINIT Burst Gap Nominal. + CIBGMX: COMINIT Burst Gap Maximum. + CIBGMN: COMINIT Burst Gap Minimum. + - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0. + - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-comwake-params = /bits/ 8 ; + CWBGMN: COMWAKE Burst Gap Minimum. + CWBGMX: COMWAKE Burst Gap Maximum. + CWBGN: COMWAKE Burst Gap Nominal. + CWNMP: COMWAKE Negate Minimum Period. + - ceva,p0-burst-params: Burst timing value for COM parameter for port 0. + - ceva,p1-burst-params: Burst timing value for COM parameter for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-burst-params = /bits/ 8 ; + BMX: COM Burst Maximum. + BNM: COM Burst Nominal. + SFD: Signal Failure Detection value. + PTST: Partial to Slumber timer value. + - ceva,p0-retry-params: Retry interval timing value for port 0. + - ceva,p1-retry-params: Retry interval timing value for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-retry-params = /bits/ 16 ; + RIT: Retry Interval Timer. + RCT: Rate Change Timer. Optional properties: - ceva,broken-gen2: limit to gen1 speed instead of gen2. @@ -16,5 +46,14 @@ Examples: interrupt-parent = <&gic>; interrupts = <0 133 4>; clocks = <&clkc SATA_CLK_ID>; + ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>; + + ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>; ceva,broken-gen2; }; diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt new file mode 100644 index 0000000000000000000000000000000000000000..fb1790e39398a0eaa27f49792c6507d5ea2570f4 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt @@ -0,0 +1,93 @@ +Texas Instruments sysc interconnect target module wrapper binding + +Texas Instruments SoCs can have a generic interconnect target module +hardware for devices connected to various interconnects such as L3 +interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc +is mostly used for interaction between module and PRCM. It participates +in the OCP Disconnect Protocol but other than that is mostly independent +of the interconnect. + +Each interconnect target module can have one or more devices connected to +it. There is a set of control registers for managing interconnect target +module clocks, idle modes and interconnect level resets for the module. + +These control registers are sprinkled into the unused register address +space of the first child device IP block managed by the interconnect +target module and typically are named REVISION, SYSCONFIG and SYSSTATUS. + +Required standard properties: + +- compatible shall be one of the following generic types: + + "ti,sysc-omap2" + "ti,sysc-omap4" + "ti,sysc-omap4-simple" + + or one of the following derivative types for hardware + needing special workarounds: + + "ti,sysc-omap3430-sr" + "ti,sysc-omap3630-sr" + "ti,sysc-omap4-sr" + "ti,sysc-omap3-sham" + "ti,sysc-omap-aes" + "ti,sysc-mcasp" + "ti,sysc-usb-host-fs" + +- reg shall have register areas implemented for the interconnect + target module in question such as revision, sysc and syss + +- reg-names shall contain the register names implemented for the + interconnect target module in question such as + "rev, "sysc", and "syss" + +- ranges shall contain the interconnect target module IO range + available for one or more child device IP blocks managed + by the interconnect target module, the ranges may include + multiple ranges such as device L4 range for control and + parent L3 range for DMA access + +Optional properties: + +- clocks clock specifier for each name in the clock-names as + specified in the binding documentation for ti-clkctrl, + typically available for all interconnect targets on TI SoCs + based on omap4 except if it's read-only register in hwauto + mode as for example omap4 L4_CFG_CLKCTRL + +- clock-names should contain at least "fck", and optionally also "ick" + depending on the SoC and the interconnect target module + +- ti,hwmods optional TI interconnect module name to use legacy + hwmod platform data + + +Example: Single instance of MUSB controller on omap4 using interconnect ranges +using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000): + + target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ + compatible = "ti,sysc-omap2"; + ti,hwmods = "usb_otg_hs"; + reg = <0x2b400 0x4>, + <0x2b404 0x4>, + <0x2b408 0x4>; + reg-names = "rev", "sysc", "syss"; + clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2b000 0x1000>; + + usb_otg_hs: otg@0 { + compatible = "ti,omap4-musb"; + reg = <0x0 0x7ff>; + interrupts = , + ; + usb-phy = <&usb2_phy>; + ... + }; + }; + +Note that other SoCs, such as am335x can have multipe child devices. On am335x +there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA +instance as children of a single interconnet target module. diff --git a/Documentation/devicetree/bindings/bus/ts-nbus.txt b/Documentation/devicetree/bindings/bus/ts-nbus.txt new file mode 100644 index 0000000000000000000000000000000000000000..2a10d065b9fab703e05bed7c7e012072cdab1574 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ts-nbus.txt @@ -0,0 +1,50 @@ +Technologic Systems NBUS + +The NBUS is a bus used to interface with peripherals in the Technologic +Systems FPGA on the TS-4600 SoM. + +Required properties : + - compatible : "technologic,ts-nbus" + - #address-cells : must be 1 + - #size-cells : must be 0 + - pwms : The PWM bound to the FPGA + - ts,data-gpios : The 8 GPIO pins connected to the data lines on the FPGA + - ts,csn-gpios : The GPIO pin connected to the csn line on the FPGA + - ts,txrx-gpios : The GPIO pin connected to the txrx line on the FPGA + - ts,strobe-gpios : The GPIO pin connected to the stobe line on the FPGA + - ts,ale-gpios : The GPIO pin connected to the ale line on the FPGA + - ts,rdy-gpios : The GPIO pin connected to the rdy line on the FPGA + +Child nodes: + +The NBUS node can contain zero or more child nodes representing peripherals +on the bus. + +Example: + + nbus { + compatible = "technologic,ts-nbus"; + pinctrl-0 = <&nbus_pins>; + #address-cells = <1>; + #size-cells = <0>; + pwms = <&pwm 2 83>; + ts,data-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH + &gpio0 1 GPIO_ACTIVE_HIGH + &gpio0 2 GPIO_ACTIVE_HIGH + &gpio0 3 GPIO_ACTIVE_HIGH + &gpio0 4 GPIO_ACTIVE_HIGH + &gpio0 5 GPIO_ACTIVE_HIGH + &gpio0 6 GPIO_ACTIVE_HIGH + &gpio0 7 GPIO_ACTIVE_HIGH>; + ts,csn-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + ts,txrx-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + ts,strobe-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + ts,ale-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + ts,rdy-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; + + watchdog@2a { + compatible = "..."; + + /* ... */ + }; + }; diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt b/Documentation/devicetree/bindings/clock/axi-clkgen.txt index fb40da303d25c8f13093aafe43df83eaf2f88f47..aca94fe9416f009ef387e9f7b7880bc5b6b5127e 100644 --- a/Documentation/devicetree/bindings/clock/axi-clkgen.txt +++ b/Documentation/devicetree/bindings/clock/axi-clkgen.txt @@ -17,7 +17,7 @@ Optional properties: - clock-output-names : From common clock binding. Example: - clock@0xff000000 { + clock@ff000000 { compatible = "adi,axi-clkgen"; #clock-cells = <0>; reg = <0xff000000 0x1000>; diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt index 7a837d2182acf74e0104b4da227cc2a4715d7504..4acfc8f641b63c83e6ad9c5e2efb510b43022213 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt @@ -23,7 +23,7 @@ Example: clocks = <&clk_osc>; }; - aux: aux@0x7e215004 { + aux: aux@7e215004 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; reg = <0x7e215000 0x8>; diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt index f2c5f0e4a363a5f247ccda48cc45d7a96f74362a..f8e4a93466cbfc8d5e7f1f11e89424843965fc6c 100644 --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt @@ -137,6 +137,20 @@ These clock IDs are defined in: ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1 ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2 +Hurricane 2 +------ +PLL and leaf clock compatible strings for Hurricane 2 are: + "brcm,hr2-armpll" + +The following table defines the set of PLL/clock for Hurricane 2: + + Clock Source Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + Northstar and Northstar Plus ------ PLL and leaf clock compatible strings for Northstar and Northstar Plus are: diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt index 2cba012f5af07690f9019ebc4e8097d60d5a69c6..6030afb10b5c15558dfd27ed40f55d4f12171ec6 100644 --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt @@ -33,6 +33,12 @@ Required Properties: - clock-names: Aliases for the above clocks. They should be "pll_ref", "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively. +Optional Properties: + + - power-domains: a phandle to respective power domain node as described by + generic PM domain bindings (see power/power_domain.txt for more + information). + The following is the list of clocks generated by the controller. Each clock is assigned an identifier and client nodes use this identifier to specify the clock which they consume. Some of the clocks are available only on a particular diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt index f5a5b19ed3b23bfd11631b9c14641e2ba3c484e3..17bb11365354d6d6126446874d562da2dfe7e45d 100644 --- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -24,7 +24,7 @@ tree sources. Example 1: An example of a clock controller node is listed below. - clock: clock-controller@0x10030000 { + clock: clock-controller@10030000 { compatible = "samsung,exynos4210-clock"; reg = <0x10030000 0x20000>; #clock-cells = <1>; @@ -41,3 +41,46 @@ Example 2: UART controller node that consumes the clock generated by the clock clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; }; + +Exynos4412 SoC contains some additional clocks for FIMC-ISP (Camera ISP) +subsystem. Registers for those clocks are located in the ISP power domain. +Because those registers are also located in a different memory region than +the main clock controller, a separate clock controller has to be defined for +handling them. + +Required Properties: + +- compatible: should be "samsung,exynos4412-isp-clock". + +- reg: physical base address of the ISP clock controller and length of memory + mapped region. + +- #clock-cells: should be 1. + +- clocks: list of the clock controller input clock identifiers, + from common clock bindings, should point to CLK_ACLK200 and + CLK_ACLK400_MCUISP clocks from the main clock controller. + +- clock-names: list of the clock controller input clock names, + as described in clock-bindings.txt, should be "aclk200" and + "aclk400_mcuisp". + +- power-domains: a phandle to ISP power domain node as described by + generic PM domain bindings. + +Example 3: The clock controllers bindings for Exynos4412 SoCs. + + clock: clock-controller@10030000 { + compatible = "samsung,exynos4412-clock"; + reg = <0x10030000 0x18000>; + #clock-cells = <1>; + }; + + isp_clock: clock-controller@10048000 { + compatible = "samsung,exynos4412-isp-clock"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>; + clock-names = "aclk200", "aclk400_mcuisp"; + }; diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt index 536eacd1063f88ccf2e9ef0e0bdcf06137558cf8..aff266a12eeb71bf7cf05a8cbeecbe4390f21ef4 100644 --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt @@ -22,7 +22,7 @@ tree sources. Example 1: An example of a clock controller node is listed below. - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5250-clock"; reg = <0x10010000 0x30000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt index 4527de3ea205d176f0425f9512e6bf560a2d3ce3..c68b0d29b3d031636f827ef904a60a6794270275 100644 --- a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt @@ -30,7 +30,7 @@ Example 1: An example of a clock controller node is listed below. #clock-cells = <0>; }; - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5410-clock"; reg = <0x10010000 0x30000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt index d54f42cf0440945396e039e3e37053bef04bbc9b..717a7b1531c78278e606c16f545627651dce2ccd 100644 --- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt @@ -23,7 +23,7 @@ tree sources. Example 1: An example of a clock controller node is listed below. - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5420-clock"; reg = <0x10010000 0x30000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index fe885abc9cb44874b2e7b7d42d6118a7a0828533..c473dd38dd550ccc03d9fc219095dc9257007376 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -168,6 +168,11 @@ Required Properties: - aclk_cam1_400 - aclk_cam1_552 +Optional properties: + - power-domains: a phandle to respective power domain node as described by + generic PM domain bindings (see power/power_domain.txt for more + information). + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -270,6 +275,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_G2D_266>, <&cmu_top CLK_ACLK_G2D_400>; + power-domains = <&pd_g2d>; }; cmu_disp: clock-controller@13b90000 { @@ -295,6 +301,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, <&cmu_mif CLK_ACLK_DISP_333>; + power-domains = <&pd_disp>; }; cmu_aud: clock-controller@114c0000 { @@ -304,6 +311,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "fout_aud_pll"; clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; + power-domains = <&pd_aud>; }; cmu_bus0: clock-controller@13600000 { @@ -340,6 +348,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_g3d_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + power-domains = <&pd_g3d>; }; cmu_gscl: clock-controller@13cf0000 { @@ -353,6 +362,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_GSCL_111>, <&cmu_top CLK_ACLK_GSCL_333>; + power-domains = <&pd_gscl>; }; cmu_apollo: clock-controller@11900000 { @@ -384,6 +394,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_SCLK_JPEG_MSCL>, <&cmu_top CLK_ACLK_MSCL_400>; + power-domains = <&pd_mscl>; }; cmu_mfc: clock-controller@15280000 { @@ -393,6 +404,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_mfc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + power-domains = <&pd_mfc>; }; cmu_hevc: clock-controller@14f80000 { @@ -402,6 +414,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_hevc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + power-domains = <&pd_hevc>; }; cmu_isp: clock-controller@146d0000 { @@ -415,6 +428,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_ISP_DIS_400>, <&cmu_top CLK_ACLK_ISP_400>; + power-domains = <&pd_isp>; }; cmu_cam0: clock-controller@120d0000 { @@ -430,6 +444,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_CAM0_333>, <&cmu_top CLK_ACLK_CAM0_400>, <&cmu_top CLK_ACLK_CAM0_552>; + power-domains = <&pd_cam0>; }; cmu_cam1: clock-controller@145d0000 { @@ -451,6 +466,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_CAM1_333>, <&cmu_top CLK_ACLK_CAM1_400>, <&cmu_top CLK_ACLK_CAM1_552>; + power-domains = <&pd_cam1>; }; Example 3: UART controller node that consumes the clock generated by the clock diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt index 5f7005f73058f74a1fe308814eb11f75d8100435..c7d227c31e95bd944f351dd977682d3337b4a2e5 100644 --- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt @@ -21,7 +21,7 @@ tree sources. Example: An example of a clock controller node is listed below. - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5440-clock"; reg = <0x160000 0x10000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index a7235e9e1c97d38fdc9ff95a036c403dfb583b28..4491d1c104aacd3b41e73856338c81afc9722f36 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -10,12 +10,23 @@ Required properties : - compatible : shall contain only one of the following. The generic compatible "qcom,rpmcc" should be also included. + "qcom,rpmcc-msm8660", "qcom,rpmcc" + "qcom,rpmcc-apq8060", "qcom,rpmcc" "qcom,rpmcc-msm8916", "qcom,rpmcc" "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" + "qcom,rpmcc-msm8996", "qcom,rpmcc" - #clock-cells : shall contain 1 +The clock enumerators are defined in +and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock +is an "active" clock, which means that the consumer only care that the +clock is available when the apps CPU subsystem is active, i.e. not +suspended or in deep idle. If it is important that the clock keeps running +during system suspend, you need to specify the non-active clock, the one +not containing *_A_* in the enumerator name. + Example: smd { compatible = "qcom,smd"; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index 316e136865688b7c4fe0c6f1d7b23934d66634d1..f1890d0777a6cc25462d308311b5722a19c21c4d 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -22,6 +22,7 @@ Required Properties: - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2) - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3) - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W) + - "renesas,r8a77970-cpg-mssr" for the r8a77970 SoC (R-Car V3M) - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3) - reg: Base address and length of the memory resource used by the CPG/MSSR @@ -31,8 +32,8 @@ Required Properties: clock-names - clock-names: List of external parent clock names. Valid names are: - "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794, - r8a7795, r8a7796, r8a77995) - - "extalr" (r8a7795, r8a7796) + r8a7795, r8a7796, r8a77970, r8a77995) + - "extalr" (r8a7795, r8a7796, r8a77970) - "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794) - #clock-cells: Must be 2 diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt index bb5d942075fbf0bf18fb9d924f34e3508fcf4298..8ff3e2774ed8d1d0fd46cbf5895346f62252c5b0 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt @@ -1,6 +1,6 @@ -* Renesas RZ Clock Pulse Generator (CPG) +* Renesas RZ/A1 Clock Pulse Generator (CPG) -The CPG generates core clocks for the RZ SoCs. It includes the PLL, variable +The CPG generates core clocks for the RZ/A1 SoCs. It includes the PLL, variable CPU and GPU clocks, and several fixed ratio dividers. The CPG also provides a Clock Domain for SoC devices, in combination with the CPG Module Stop (MSTP) Clocks. diff --git a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt index 3e6a81e99804435c003560e9f2145a6a5e6e74c9..c35cb6c4af4d9fd7e681de3c9d6a5bdbe629e034 100644 --- a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt +++ b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt @@ -14,7 +14,7 @@ Required properties: Example: -pllctrl: pll-controller@0x02310000 { +pllctrl: pll-controller@02310000 { compatible = "ti,keystone-pllctrl", "syscon"; reg = <0x02310000 0x200>; }; diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt index e85ecb510d56daad83ffbbe3572a96dc110a43a3..5c91c9e4f1beb47f35feb64361f3de23bcc35389 100644 --- a/Documentation/devicetree/bindings/clock/zx296702-clk.txt +++ b/Documentation/devicetree/bindings/clock/zx296702-clk.txt @@ -20,13 +20,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h for the full list of zx296702 clock IDs. -topclk: topcrm@0x09800000 { +topclk: topcrm@09800000 { compatible = "zte,zx296702-topcrm-clk"; reg = <0x09800000 0x1000>; #clock-cells = <1>; }; -uart0: serial@0x09405000 { +uart0: serial@09405000 { compatible = "zte,zx296702-uart"; reg = <0x09405000 0x1000>; interrupts = ; diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index 7aef0eae58d43cce4a2d94aa6e20fc5c40343ffa..76aec8a3724d62120392be98cd093acd0f4015b5 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -456,7 +456,7 @@ System ON/OFF key driver Definition: this is phandle to the register map node. EXAMPLE: - snvs-pwrkey@0x020cc000 { + snvs-pwrkey@020cc000 { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = <0 4 0x4> @@ -545,7 +545,7 @@ FULL EXAMPLE interrupts = <93 2>; }; - snvs-pwrkey@0x020cc000 { + snvs-pwrkey@020cc000 { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&sec_mon>; interrupts = <0 4 0x4>; diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt index 001dd63979a974802fe69b6e72b12fe79c7c1c6b..148191b0fc15864725da6907a0571b64337024d6 100644 --- a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt +++ b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt @@ -9,7 +9,7 @@ Required properties: - clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon"; Example: - dfi: dfi@0xff630000 { + dfi: dfi@ff630000 { compatible = "rockchip,rk3399-dfi"; reg = <0x00 0xff630000 0x00 0x4000>; rockchip,pmu = <&pmugrf>; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt index 1a21202778ee354af7e5fc1f3d9ce65b0a7a964a..acb5a01321279e13d0c0c2780be8018b330152d8 100644 --- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt +++ b/Documentation/devicetree/bindings/display/atmel,lcdc.txt @@ -27,7 +27,7 @@ Optional properties: Example: - fb0: fb@0x00500000 { + fb0: fb@00500000 { compatible = "atmel,at91sam9g45-lcdc"; reg = <0x00500000 0x1000>; interrupts = <23 3 0>; @@ -41,7 +41,7 @@ Example: Example for fixed framebuffer memory: - fb0: fb@0x00500000 { + fb0: fb@00500000 { compatible = "atmel,at91sam9263-lcdc"; reg = <0x00700000 0x1000 0x70000000 0x200000>; [...] diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 06668bca7ffcd9385a08b9d1ed80a4321bf83ab5..0047b1394c704d5ad4e558f8373b5b6f5ea7972b 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -68,6 +68,8 @@ Optional properties: - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing generator. The chip will rely on the sync signals in the DSI data lanes, rather than generate its own timings for HDMI output. +- clocks: from common clock binding: reference to the CEC clock. +- clock-names: from common clock binding: must be "cec". Required nodes: @@ -89,6 +91,8 @@ Example reg = <39>; interrupt-parent = <&gpio3>; interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + clocks = <&cec_clock>; + clock-names = "cec"; adi,input-depth = <8>; adi,input-colorspace = "rgb"; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index b1a8929c2536cc324a1d34073dabc2fe2ddf53cf..3a72a103a18a8c40d1f09957123d6240d5685c8f 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -37,7 +37,7 @@ Optional properties: Example: - hdmi0: hdmi0@fead0000 { + hdmi0: hdmi@fead0000 { compatible = "renesas,r8a7795-dw-hdmi"; reg = <0 0xfead0000 0 0x10000>; interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt new file mode 100644 index 0000000000000000000000000000000000000000..88041ba23d56c9f8972078b35c59c9d6c68553f9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sii9234.txt @@ -0,0 +1,49 @@ +Silicon Image SiI9234 HDMI/MHL bridge bindings + +Required properties: + - compatible : "sil,sii9234". + - reg : I2C address for TPI interface, use 0x39 + - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V) + - iovcc18-supply : I/O Supply Voltage (1.8V) + - avcc12-supply : TMDS Analog Supply Voltage (1.2V) + - cvcc12-supply : Digital Core Supply Voltage (1.2V) + - interrupts, interrupt-parent: interrupt specifier of INT pin + - reset-gpios: gpio specifier of RESET pin (active low) + - video interfaces: Device node can contain two video interface port + nodes for HDMI encoder and connector according to [1]. + - port@0 - MHL to HDMI + - port@1 - MHL to connector + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + + +Example: + sii9234@39 { + compatible = "sil,sii9234"; + reg = <0x39>; + avcc33-supply = <&vcc33mhl>; + iovcc18-supply = <&vcc18mhl>; + avcc12-supply = <&vsil12>; + cvcc12-supply = <&vsil12>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + port@1 { + reg = <1>; + mhl_to_connector: endpoint { + remote-endpoint = <&connector_to_mhl>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt new file mode 100644 index 0000000000000000000000000000000000000000..82e3bc0b7485a098def2f449f7fecdede66658a4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/faraday,tve200.txt @@ -0,0 +1,54 @@ +* Faraday TV Encoder TVE200 + +Required properties: + +- compatible: must be one of: + "faraday,tve200" + "cortina,gemini-tvc", "faraday,tve200" + +- reg: base address and size of the control registers block + +- interrupts: contains an interrupt specifier for the interrupt + line from the TVE200 + +- clock-names: should contain "PCLK" for the clock line clocking the + silicon and "TVE" for the 27MHz clock to the video driver + +- clocks: contains phandle and clock specifier pairs for the entries + in the clock-names property. See + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Optional properties: + +- resets: contains the reset line phandle for the block + +Required sub-nodes: + +- port: describes LCD panel signals, following the common binding + for video transmitter interfaces; see + Documentation/devicetree/bindings/media/video-interfaces.txt + This port should have the properties: + reg = <0>; + It should have one endpoint connected to a remote endpoint where + the display is connected. + +Example: + +display-controller@6a000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "faraday,tve200"; + reg = <0x6a000000 0x1000>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_TVC>; + clocks = <&syscon GEMINI_CLK_GATE_TVC>, + <&syscon GEMINI_CLK_TVC>; + clock-names = "PCLK", "TVE"; + + port@0 { + reg = <0>; + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/google,goldfish-fb.txt b/Documentation/devicetree/bindings/display/google,goldfish-fb.txt new file mode 100644 index 0000000000000000000000000000000000000000..751fa9f51e5d4fab3235af5ab14f0d80af0a59de --- /dev/null +++ b/Documentation/devicetree/bindings/display/google,goldfish-fb.txt @@ -0,0 +1,17 @@ +Android Goldfish framebuffer + +Android Goldfish framebuffer device used by Android emulator. + +Required properties: + +- compatible : should contain "google,goldfish-fb" +- reg : +- interrupts : + +Example: + + display-controller@1f008000 { + compatible = "google,goldfish-fb"; + interrupts = <0x10>; + reg = <0x1f008000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt index f79854783c2c342655b37e1ffc31cb3cb3f2a02e..5bf77f6dd19db0ea3eab3cb3f837f54089c2a547 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt @@ -129,7 +129,7 @@ Optional properties: example: -display@di0 { +disp0 { compatible = "fsl,imx-parallel-display"; edid = [edid-data]; interface-pix-fmt = "rgb24"; diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index fa00e62e1cf6983874207b30095b0451e8ef4334..a6671bd2c85ab47116a9862d7e51c8050d1c8e02 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -13,16 +13,16 @@ Required properties: - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: Phandles to device clocks. - clock-names: the following clocks are required: - * "mdp_core_clk" - * "iface_clk" - * "bus_clk" - * "core_mmss_clk" - * "byte_clk" - * "pixel_clk" - * "core_clk" + * "mdp_core" + * "iface" + * "bus" + * "core_mmss" + * "byte" + * "pixel" + * "core" For DSIv2, we need an additional clock: - * "src_clk" -- assigned-clocks: Parents of "byte_clk" and "pixel_clk" for the given platform. + * "src" +- assigned-clocks: Parents of "byte" and "pixel" for the given platform. - assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block. See [1] for details on clock bindings. - vdd-supply: phandle to vdd regulator device node @@ -101,7 +101,7 @@ Required properties: - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: Phandles to device clocks. See [1] for details on clock bindings. - clock-names: the following clocks are required: - * "iface_clk" + * "iface" - vddio-supply: phandle to vdd-io regulator device node Optional properties: @@ -123,13 +123,13 @@ Example: reg = <0xfd922800 0x200>; power-domains = <&mmcc MDSS_GDSC>; clock-names = - "bus_clk", - "byte_clk", - "core_clk", - "core_mmss_clk", - "iface_clk", - "mdp_core_clk", - "pixel_clk"; + "bus", + "byte", + "core", + "core_mmss", + "iface", + "mdp_core", + "pixel"; clocks = <&mmcc MDSS_AXI_CLK>, <&mmcc MDSS_BYTE0_CLK>, @@ -207,7 +207,7 @@ Example: reg = <0xfd922a00 0xd4>, <0xfd922b00 0x2b0>, <0xfd922d80 0x7b>; - clock-names = "iface_clk"; + clock-names = "iface"; clocks = <&mmcc MDSS_AHB_CLK>; #clock-cells = <1>; vddio-supply = <&pma8084_l12>; diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt index e63032be540114833bdcc48cf86afd4d82f3f63a..95ce19ca7bc524240a223b7a5be416dab61a7f85 100644 --- a/Documentation/devicetree/bindings/display/msm/edp.txt +++ b/Documentation/devicetree/bindings/display/msm/edp.txt @@ -12,11 +12,11 @@ Required properties: - clocks: device clocks See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. - clock-names: the following clocks are required: - * "core_clk" - * "iface_clk" - * "mdp_core_clk" - * "pixel_clk" - * "link_clk" + * "core" + * "iface" + * "mdp_core" + * "pixel" + * "link" - #clock-cells: The value should be 1. - vdda-supply: phandle to vdda regulator device node - lvl-vdd-supply: phandle to regulator device node which is used to supply power @@ -41,11 +41,11 @@ Example: interrupts = <12 0>; power-domains = <&mmcc MDSS_GDSC>; clock-names = - "core_clk", - "pixel_clk", - "iface_clk", - "link_clk", - "mdp_core_clk"; + "core", + "pixel", + "iface", + "link", + "mdp_core"; clocks = <&mmcc MDSS_EDPAUX_CLK>, <&mmcc MDSS_EDPPIXEL_CLK>, diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt index 2d306f402d18c9f38d41d29e6581e9e1793c9037..5f90a40da51b2f0c96273c5afeec3e2bce6d485a 100644 --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt +++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt @@ -64,9 +64,9 @@ Example: interrupts = ; power-domains = <&mmcc MDSS_GDSC>; clock-names = - "core_clk", - "master_iface_clk", - "slave_iface_clk"; + "core", + "master_iface", + "slave_iface"; clocks = <&mmcc HDMI_APP_CLK>, <&mmcc HDMI_M_AHB_CLK>, @@ -92,7 +92,7 @@ Example: <0x4a00500 0x100>; #phy-cells = <0>; power-domains = <&mmcc MDSS_GDSC>; - clock-names = "slave_iface_clk"; + clock-names = "slave_iface"; clocks = <&mmcc HDMI_S_AHB_CLK>; core-vdda-supply = <&pm8921_hdmi_mvs>; }; diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt index 30c11ea837542cde1eab65a739dca1597b2c42fe..1b31977a68ba8ba8435b16d2f58e73dcd73ed879 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt @@ -22,16 +22,16 @@ Required properties: Documentation/devicetree/bindings/power/power_domain.txt - clocks: device clocks. See ../clocks/clock-bindings.txt for details. - clock-names: the following clocks are required. - * "iface_clk" - * "bus_clk" - * "vsync_clk" + * "iface" + * "bus" + * "vsync" - #address-cells: number of address cells for the MDSS children. Should be 1. - #size-cells: Should be 1. - ranges: parent bus address space is the same as the child bus address space. Optional properties: - clock-names: the following clocks are optional: - * "lut_clk" + * "lut" MDP5: Required properties: @@ -45,10 +45,10 @@ Required properties: through MDP block - clocks: device clocks. See ../clocks/clock-bindings.txt for details. - clock-names: the following clocks are required. -- * "bus_clk" -- * "iface_clk" -- * "core_clk" -- * "vsync_clk" +- * "bus" +- * "iface" +- * "core" +- * "vsync" - ports: contains the list of output ports from MDP. These connect to interfaces that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a special case since it is a part of the MDP block itself). @@ -77,7 +77,7 @@ Required properties: Optional properties: - clock-names: the following clocks are optional: - * "lut_clk" + * "lut" Example: @@ -95,9 +95,9 @@ Example: clocks = <&gcc GCC_MDSS_AHB_CLK>, <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "vsync_clk" + clock-names = "iface", + "bus", + "vsync" interrupts = <0 72 0>; @@ -120,10 +120,10 @@ Example: <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "core_clk", - "vsync_clk"; + clock-names = "iface", + "bus", + "core", + "vsync"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt new file mode 100644 index 0000000000000000000000000000000000000000..6862028e7b2ecd9b1ef65079b02fc790ef412f3d --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt @@ -0,0 +1,21 @@ +Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) + +The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using +a MIPI-DSI video interface. Its backlight is managed through the DSI link. + +Required properties: + - compatible: "orisetech,otm8009a" + - reg: the virtual channel number of a DSI peripheral + +Optional properties: + - reset-gpios: a GPIO spec for the reset pin (active low). + +Example: +&dsi { + ... + panel@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt new file mode 100644 index 0000000000000000000000000000000000000000..e9e19c059260d6d8f33acf4113197eab209011ba --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt @@ -0,0 +1,49 @@ +This binding covers the official 7" (800x480) Raspberry Pi touchscreen +panel. + +This DSI panel contains: + +- TC358762 DSI->DPI bridge +- Atmel microcontroller on I2C for power sequencing the DSI bridge and + controlling backlight +- Touchscreen controller on I2C for touch input + +and this binding covers the DSI display parts but not its touch input. + +Required properties: +- compatible: Must be "raspberrypi,7inch-touchscreen-panel" +- reg: Must be "45" +- port: See panel-common.txt + +Example: + +dsi1: dsi@7e700000 { + #address-cells = <1>; + #size-cells = <0>; + <...> + + port { + dsi_out_port: endpoint { + remote-endpoint = <&panel_dsi_port>; + }; + }; +}; + +i2c_dsi: i2c { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpio 28 0 + &gpio 29 0>; + + lcd@45 { + compatible = "raspberrypi,7inch-touchscreen-panel"; + reg = <0x45>; + + port { + panel_dsi_port: endpoint { + remote-endpoint = <&dsi_out_port>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt new file mode 100644 index 0000000000000000000000000000000000000000..3f1a8392af7ff1797fff844233ab363233fc3a06 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt @@ -0,0 +1,24 @@ +Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode) + +Required properties: + - compatible: "samsung,s6e63j0x03" + - reg: the virtual channel number of a DSI peripheral + - vdd3-supply: I/O voltage supply + - vci-supply: voltage supply for analog circuits + - reset-gpios: a GPIO spec for the reset pin (active low) + - te-gpios: a GPIO spec for the tearing effect synchronization signal + gpio pin (active high) + +Example: +&dsi { + ... + + panel@0 { + compatible = "samsung,s6e63j0x03"; + reg = <0>; + vdd3-supply = <&ldo16_reg>; + vci-supply = <&ldo20_reg>; + reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; + te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt new file mode 100644 index 0000000000000000000000000000000000000000..aae57ef36cdd237a4463a9c0877ffe04ba062445 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt @@ -0,0 +1,23 @@ +Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel + +Required properties: +- compatible: should be "sii,43wvf1g". +- "dvdd-supply": 3v3 digital regulator. +- "avdd-supply": 5v analog regulator. + +Optional properties: +- backlight: phandle for the backlight control. + +Example: + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt new file mode 100644 index 0000000000000000000000000000000000000000..4c0caaf246c911da3b2da69403248d04d3389a27 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt @@ -0,0 +1,8 @@ +Toshiba 8.9" WXGA (1280x768) TFT LCD panel + +Required properties: +- compatible: should be "toshiba,lt089ac29000.txt" +- power-supply: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt new file mode 100644 index 0000000000000000000000000000000000000000..da6939efdb43a47039e63be0634894228b17fc94 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt @@ -0,0 +1,99 @@ +Rockchip RK3288 LVDS interface +================================ + +Required properties: +- compatible: matching the soc type, one of + - "rockchip,rk3288-lvds"; + +- reg: physical base address of the controller and length + of memory mapped region. +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. +- clock-names: must contain "pclk_lvds" + +- avdd1v0-supply: regulator phandle for 1.0V analog power +- avdd1v8-supply: regulator phandle for 1.8V analog power +- avdd3v3-supply: regulator phandle for 3.3V analog power + +- rockchip,grf: phandle to the general register files syscon +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface + +Optional properties: +- pinctrl-names: must contain a "lcdc" entry. +- pinctrl-0: pin control group to be used for this controller. + +Required nodes: + +The lvds has two video ports as described by + Documentation/devicetree/bindings/media/video-interfaces.txt +Their connections are modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl +- video port 1 for either a panel or subsequent encoder + +the lvds panel described by + Documentation/devicetree/bindings/display/panel/simple-panel.txt + +Panel required properties: +- ports for remote LVDS output + +Panel optional properties: +- data-mapping: should be "vesa-24","jeida-24" or "jeida-18". +This describes decribed by: + Documentation/devicetree/bindings/display/panel/panel-lvds.txt + +Example: + +lvds_panel: lvds-panel { + compatible = "auo,b101ean01"; + enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>; + data-mapping = "jeida-24"; + + ports { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; +}; + +For Rockchip RK3288: + + lvds: lvds@ff96c000 { + compatible = "rockchip,rk3288-lvds"; + rockchip,grf = <&grf>; + reg = <0xff96c000 0x4000>; + clocks = <&cru PCLK_LVDS_PHY>; + clock-names = "pclk_lvds"; + pinctrl-names = "lcdc"; + pinctrl-0 = <&lcdc_ctl>; + avdd1v0-supply = <&vdd10_lcd>; + avdd1v8-supply = <&vcc18_lcd>; + avdd3v3-supply = <&vcca_33>; + rockchip,output = "rgb"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + lvds_in: port@0 { + reg = <0>; + + lvds_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_lvds>; + }; + lvds_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_lvds>; + }; + }; + + lvds_out: port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index b7faa6f6a326070423cc68019657a479197dbade..50cc72ee11689ccc99f54252b0c1a442362b9569 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -40,15 +40,19 @@ CEC. It is one end of the pipeline. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-hdmi * allwinner,sun5i-a10s-hdmi + * allwinner,sun6i-a31-hdmi - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the HDMI encoder * ahb: the HDMI interface clock * mod: the HDMI module clock + * ddc: the HDMI ddc clock (A31 only) * pll-0: the first video PLL * pll-1: the second video PLL - clock-names: the clock names mentioned above + - resets: phandle to the reset control for the HDMI encoder (A31 only) - dmas: phandles to the DMA channels used by the HDMI encoder * ddc-tx: The channel for DDC transmission * ddc-rx: The channel for DDC reception @@ -83,9 +87,11 @@ The TCON acts as a timing controller for RGB, LVDS and TV interfaces. Required properties: - compatible: value must be either: + * allwinner,sun4i-a10-tcon * allwinner,sun5i-a13-tcon * allwinner,sun6i-a31-tcon * allwinner,sun6i-a31s-tcon + * allwinner,sun7i-a20-tcon * allwinner,sun8i-a33-tcon * allwinner,sun8i-v3s-tcon - reg: base address and size of memory-mapped region @@ -150,8 +156,10 @@ system. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-display-backend * allwinner,sun5i-a13-display-backend * allwinner,sun6i-a31-display-backend + * allwinner,sun7i-a20-display-backend * allwinner,sun8i-a33-display-backend - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP @@ -182,8 +190,10 @@ deinterlacing and color space conversion. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-display-frontend * allwinner,sun5i-a13-display-frontend * allwinner,sun6i-a31-display-frontend + * allwinner,sun7i-a20-display-frontend * allwinner,sun8i-a33-display-frontend - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP @@ -228,10 +238,12 @@ extra node. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-display-engine * allwinner,sun5i-a10s-display-engine * allwinner,sun5i-a13-display-engine * allwinner,sun6i-a31-display-engine * allwinner,sun6i-a31s-display-engine + * allwinner,sun7i-a20-display-engine * allwinner,sun8i-a33-display-engine * allwinner,sun8i-v3s-display-engine diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 74e1e8add5a1264bfc2ed8db1b26667ed8906903..844e0103fb0dac15220794cfde75f6d58b2c4d73 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -3,6 +3,10 @@ NVIDIA Tegra host1x Required properties: - compatible: "nvidia,tegra-host1x" - reg: Physical base address and length of the controller's registers. + For pre-Tegra186, one entry describing the whole register area. + For Tegra186, one entry for each entry in reg-names: + "vm" - VM region assigned to Linux + "hypervisor" - Hypervisor region (only if Linux acts as hypervisor) - interrupts: The interrupt outputs from the controller. - #address-cells: The number of cells used to represent physical base addresses in the host1x address space. Should be 1. diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt index 55492c264d1779539ffb838f3e2f020c07e45709..b3408cc57be6d398f2c206f5d599d7134004dd0b 100644 --- a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt +++ b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt @@ -73,7 +73,7 @@ Hypervisor OS configuration: max-read-transactions = <31>; channel-reset-timeout-cycles = <0x500>; - hidma_24: dma-controller@0x5c050000 { + hidma_24: dma-controller@5c050000 { compatible = "qcom,hidma-1.0"; reg = <0 0x5c050000 0x0 0x1000>, <0 0x5c0b0000 0x0 0x1000>; @@ -85,7 +85,7 @@ Hypervisor OS configuration: Guest OS configuration: - hidma_24: dma-controller@0x5c050000 { + hidma_24: dma-controller@5c050000 { compatible = "qcom,hidma-1.0"; reg = <0 0x5c050000 0x0 0x1000>, <0 0x5c0b0000 0x0 0x1000>; diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt index d4c34774d626fc4829b93827d83b26fc18c5ff49..7fccc20d83311c22713370968638190720c90e1a 100644 --- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -18,7 +18,7 @@ Required properties: - #dma-cells : Should be 1, a single cell holding a line request number Example: - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun6i-a31-dma"; reg = <0x01c02000 0x1000>; interrupts = <0 50 4>; diff --git a/Documentation/devicetree/bindings/dma/zxdma.txt b/Documentation/devicetree/bindings/dma/zxdma.txt index abec59f35fde949baf60210017407e45e8cffce6..0ab80f69e566ef7c66001486a7cd5acea5685df8 100644 --- a/Documentation/devicetree/bindings/dma/zxdma.txt +++ b/Documentation/devicetree/bindings/dma/zxdma.txt @@ -13,7 +13,7 @@ Required properties: Example: Controller: - dma: dma-controller@0x09c00000{ + dma: dma-controller@09c00000{ compatible = "zte,zx296702-dma"; reg = <0x09c00000 0x1000>; clocks = <&topclk ZX296702_DMA_ACLK>; diff --git a/Documentation/devicetree/bindings/eeprom/at25.txt b/Documentation/devicetree/bindings/eeprom/at25.txt index 1d3447165c374f673aa9a717f94f2387cfd852f1..e823d90b802f7f8f293f9c0ba4f06533361824bd 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.txt +++ b/Documentation/devicetree/bindings/eeprom/at25.txt @@ -1,7 +1,12 @@ EEPROMs (SPI) compatible with Atmel at25. Required properties: -- compatible : "atmel,at25". +- compatible : Should be ",", and generic value "atmel,at25". + Example "," values: + "microchip,25lc040" + "st,m95m02" + "st,m95256" + - reg : chip select number - spi-max-frequency : max spi frequency to use - pagesize : size of the eeprom page @@ -13,7 +18,7 @@ Optional properties: - spi-cpol : SPI inverse clock polarity, as per spi-bus bindings. - read-only : this parameter-less property disables writes to the eeprom -Obsolete legacy properties are can be used in place of "size", "pagesize", +Obsolete legacy properties can be used in place of "size", "pagesize", "address-width", and "read-only": - at25,byte-len : total eeprom size in bytes - at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h @@ -22,8 +27,8 @@ Obsolete legacy properties are can be used in place of "size", "pagesize", Additional compatible properties are also allowed. Example: - at25@0 { - compatible = "atmel,at25", "st,m95256"; + eeprom@0 { + compatible = "st,m95256", "atmel,at25"; reg = <0> spi-max-frequency = <5000000>; spi-cpha; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index 20f26fbce8756c6692969532c7cf8629f7c53a35..7b40054be0d8c76a3196cdb9fd2cc093ce63b463 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -18,6 +18,8 @@ Required properties: * Core, iface, and bus clocks required for "qcom,scm" - clock-names: Must contain "core" for the core clock, "iface" for the interface clock and "bus" for the bus clock per the requirements of the compatible. +- qcom,dload-mode: phandle to the TCSR hardware block and offset of the + download mode control register (optional) Example for MSM8916: diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt index 826a7208ca93a8f5cd31f4a94c96b36ce6c7dab1..146e554b3c6769cfe10238acc1e9b48d9a5e3d28 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-altera.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt @@ -30,7 +30,7 @@ Optional properties: Example: -gpio_altr: gpio@0xff200000 { +gpio_altr: gpio@ff200000 { compatible = "altr,pio-1.0"; reg = <0xff200000 0x10>; interrupts = <0 45 4>; diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt index 7f57271df2bc96b41168d337c911511ccb726e33..0d0158728f897bd9fbeaa41e884955445ca1f062 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt @@ -27,7 +27,7 @@ Required properties: ti,tca6424 ti,tca9539 ti,tca9554 - onsemi,pca9654 + onnn,pca9654 exar,xra1202 Optional properties: diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index b4ebd56d03f340a9e16752daedad188674ff4564..c6814d7cc2b282b2710275abf03e4a654ab84a07 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -13,6 +13,10 @@ Required properties: + allwinner,sun50i-h5-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + + rockchip,rk3036-mali + + rockchip,rk3066-mali + + rockchip,rk3188-mali + + rockchip,rk3228-mali + stericsson,db8500-mali - reg: Physical base address and length of the GPU registers @@ -40,10 +44,18 @@ Optional properties: Memory region to allocate from, as defined in Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt + - mali-supply: + Phandle to regulator for the Mali device, as defined in + Documentation/devicetree/bindings/regulator/regulator.txt for details. + - operating-points-v2: Operating Points for the GPU, as defined in Documentation/devicetree/bindings/opp/opp.txt + - power-domains: + A power domain consumer specifier as defined in + Documentation/devicetree/bindings/power/power_domain.txt + Vendor-specific bindings ------------------------ @@ -63,6 +75,10 @@ to specify one more vendor-specific compatible, among: Required properties: * resets: phandle to the reset line for the GPU + - Rockchip variants: + Required properties: + * resets: phandle to the reset line for the GPU + - stericsson,db8500-mali Required properties: * interrupt-names and interrupts: diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt index b8eca3c7810dfb0ca184339537cd1e3e43383ac2..955e335e7e5698d14f4631441d4d1de3a8e3a047 100644 --- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt +++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt @@ -1,10 +1,12 @@ OMAP SSI controller bindings -OMAP Synchronous Serial Interface (SSI) controller implements a legacy -variant of MIPI's High Speed Synchronous Serial Interface (HSI). +OMAP3's Synchronous Serial Interface (SSI) controller implements a +legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI), +while the controller found inside OMAP4 is supposed to be fully compliant +with the HSI standard. Required properties: -- compatible: Should include "ti,omap3-ssi". +- compatible: Should include "ti,omap3-ssi" or "ti,omap4-hsi" - reg-names: Contains the values "sys" and "gdd" (in this order). - reg: Contains a matching register specifier for each entry in reg-names. @@ -27,6 +29,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device. Required Port sub-node properties: - compatible: Should be set to the following value ti,omap3-ssi-port (applicable to OMAP34xx devices) + ti,omap4-hsi-port (applicable to OMAP44xx devices) - reg-names: Contains the values "tx" and "rx" (in this order). - reg: Contains a matching register specifier for each entry in reg-names. @@ -38,6 +41,10 @@ Required Port sub-node properties: property. If it's missing the port will not be enabled. +Optional properties: +- ti,hwmods: Shall contain TI interconnect module name if needed + by the SoC + Example for Nokia N900: ssi-controller@48058000 { diff --git a/Documentation/devicetree/bindings/hwmon/jc42.txt b/Documentation/devicetree/bindings/hwmon/jc42.txt index 07a250498fbb4cccb3210a418c572907d8310c43..f569db58f64a100b6c72e1053ce443b77ae102c2 100644 --- a/Documentation/devicetree/bindings/hwmon/jc42.txt +++ b/Documentation/devicetree/bindings/hwmon/jc42.txt @@ -34,6 +34,10 @@ Required properties: - reg: I2C address +Optional properties: +- smbus-timeout-disable: When set, the smbus timeout function will be disabled. + This is not supported on all chips. + Example: temp-sensor@1a { diff --git a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt index 231e4cc4008cbcf0783c6ab438fa3eca1815c4fb..d4a082acf92f0f7b98cdd0702c47de3bbed30725 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt @@ -18,7 +18,7 @@ Optional properties: Example / { - i2c4: i2c4@0x10054000 { + i2c4: i2c4@10054000 { compatible = "ingenic,jz4780-i2c"; reg = <0x10054000 0x1000>; diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt index 54e7e70bcea52da324caf4f6c277573cca91f823..831dbee7a5c35abee4e2d64e5c2c30de653fbe7a 100644 --- a/Documentation/devicetree/bindings/iio/pressure/hp03.txt +++ b/Documentation/devicetree/bindings/iio/pressure/hp03.txt @@ -10,7 +10,7 @@ Required properties: Example: -hp03@0x77 { +hp03@77 { compatible = "hoperf,hp03"; reg = <0x77>; xclr-gpio = <&portc 0 0x0>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt index ca5a2c86480cff1ec8f68168a9f7c94c1a29ef01..56d835242af2d834f440e3d149011b38e5a7a65f 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt @@ -15,7 +15,7 @@ Optional properties: Example: i2c@80110000 { - bu21013_tp@0x5c { + bu21013_tp@5c { compatible = "rohm,bu21013_tp"; reg = <0x5c>; touch-gpio = <&gpio2 20 0x4>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt index 560d8a727b8f84e951b227d8fcc838579ddc94b1..2f324464864658a80a13b1cdab0395282f280b8e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt @@ -155,7 +155,7 @@ Example: <0x0 0xe112f000 0 0x02000>, <0x0 0xe1140000 0 0x10000>, <0x0 0xe1160000 0 0x10000>; - v2m0: v2m@0x8000 { + v2m0: v2m@8000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x80000 0 0x1000>; @@ -163,7 +163,7 @@ Example: .... - v2mN: v2m@0x9000 { + v2mN: v2m@9000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x90000 0 0x1000>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt index 49ccabbfa6f3dcd13634f52ef308d8251e163027..a4ff93d6b7f386454558035472e1a2aa0eca205d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt @@ -8,6 +8,7 @@ Required properties: "fsl,ls1043a-msi" "fsl,ls1046a-msi" "fsl,ls1043a-v1.1-msi" + "fsl,ls1012a-msi" - msi-controller: indicates that this is a PCIe MSI controller node - reg: physical base address of the controller and length of memory mapped. - interrupts: an interrupt to the parent interrupt controller. diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt index 80994adab3928905de7c44bbc725a1f6f345ca74..42431f44697fb22cee723d176ef4ce9d1cdc4ebd 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt @@ -71,7 +71,7 @@ Example 2: * An interrupt generating device that is wired to a Meta external * trigger block. */ - uart1: uart@0x02004c00 { + uart1: uart@02004c00 { // Interrupt source '5' that is level-sensitive. // Note that there are only two cells as specified in the // interrupt parent's '#interrupt-cells' property. diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt index a691185503441ec2ed37e292c8412af12a116f8e..5dc2a55ad81143d86d8e781f147342ad6a21848e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt @@ -51,7 +51,7 @@ Example 1: /* * TZ1090 PDC block */ - pdc: pdc@0x02006000 { + pdc: pdc@02006000 { // This is an interrupt controller node. interrupt-controller; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt index 715a013ed4bdef1ada6217e5f5540df142d385ce..2ab0ea39867b516dd9462e8b71142ddf8d8a5f8d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt @@ -39,7 +39,7 @@ Example: The following is an example from the SPEAr320 SoC dtsi file. -shirq: interrupt-controller@0xb3000000 { +shirq: interrupt-controller@b3000000 { compatible = "st,spear320-shirq"; reg = <0xb3000000 0x1000>; interrupts = <28 29 30 1>; diff --git a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt index c2619797ce0c92f06b41117940209f4c9e37ca1c..49cfc8c337c4644a5b7cd271660fe88b5ec28412 100644 --- a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt +++ b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt @@ -14,7 +14,7 @@ Optional properties: depends on the interrupt controller parent. Example: - mbox_tx: mailbox@0x100 { + mbox_tx: mailbox@100 { compatible = "altr,mailbox-1.0"; reg = <0x100 0x8>; interrupt-parent = < &gic_0 >; @@ -22,7 +22,7 @@ Example: #mbox-cells = <1>; }; - mbox_rx: mailbox@0x200 { + mbox_rx: mailbox@200 { compatible = "altr,mailbox-1.0"; reg = <0x200 0x8>; interrupt-parent = < &gic_0 >; @@ -40,7 +40,7 @@ support only one channel).The equivalent "mbox-names" property value can be used to give a name to the communication channel to be used by the client user. Example: - mclient0: mclient0@0x400 { + mclient0: mclient0@400 { compatible = "client-1.0"; reg = <0x400 0x10>; mbox-names = "mbox-tx", "mbox-rx"; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt index 0f3ee81d92c297022adcdbb1f9689f4b924ea143..9bcdf2087625c108a8180060f3dd9ebb4c111a46 100644 --- a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt @@ -15,7 +15,7 @@ Optional properties: - brcm,use-bcm-hdr: present if a BCM header precedes each frame. Example: - pdc0: iproc-pdc0@0x612c0000 { + pdc0: iproc-pdc0@612c0000 { compatible = "brcm,iproc-pdc-mbox"; reg = <0 0x612c0000 0 0x445>; /* PDC FS0 regs */ interrupts = ; diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt new file mode 100644 index 0000000000000000000000000000000000000000..46a0bac8b3b95cf001dd7e4f2a59675c4cd4e747 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec-gpio.txt @@ -0,0 +1,32 @@ +* HDMI CEC GPIO driver + +The HDMI CEC GPIO module supports CEC implementations where the CEC line +is hooked up to a pull-up GPIO line and - optionally - the HPD line is +hooked up to another GPIO line. + +Required properties: + - compatible: value must be "cec-gpio". + - cec-gpios: gpio that the CEC line is connected to. The line should be + tagged as open drain. + +If the CEC line is associated with an HDMI receiver/transmitter, then the +following property is also required: + + - hdmi-phandle - phandle to the HDMI controller, see also cec.txt. + +If the CEC line is not associated with an HDMI receiver/transmitter, then +the following property is optional: + + - hpd-gpios: gpio that the HPD line is connected to. + +Example for the Raspberry Pi 3 where the CEC line is connected to +pin 26 aka BCM7 aka CE1 on the GPIO pin header and the HPD line is +connected to pin 11 aka BCM17: + +#include + +cec-gpio { + compatible = "cec-gpio"; + cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt index 26ca25b6d2647eeaa0196dc6f013c08efbfd1512..bc963a6d305a8bbc0e0ca2a231eea89d3247087c 100644 --- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt +++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt @@ -3,8 +3,11 @@ G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs. Required properties: -- compatible: should be "samsung,exynos5-gsc" (for Exynos 5250, 5420 and - 5422 SoCs) or "samsung,exynos5433-gsc" (Exynos 5433) +- compatible: should be one of + "samsung,exynos5250-gsc" + "samsung,exynos5420-gsc" + "samsung,exynos5433-gsc" + "samsung,exynos5-gsc" (deprecated) - reg: should contain G-Scaler physical address location and length. - interrupts: should contain G-Scaler interrupt number @@ -14,8 +17,8 @@ Optional properties: Example: -gsc_0: gsc@0x13e00000 { - compatible = "samsung,exynos5-gsc"; +gsc_0: gsc@13e00000 { + compatible = "samsung,exynos5250-gsc"; reg = <0x13e00000 0x1000>; interrupts = <0 85 0>; }; diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt new file mode 100644 index 0000000000000000000000000000000000000000..80f2e89568e10153a03ae8cc595eb449a4dc4fd9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt @@ -0,0 +1,33 @@ +* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor + +The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with +an active array size of 3864H x 2202V. It is programmable through I2C +interface. The I2C address is fixed to 0x1a as per sensor data sheet. +Image data is sent through MIPI CSI-2, which is configured as 4 lanes +at 1440 Mbps. + + +Required Properties: +- compatible: value should be "sony,imx274" for imx274 sensor +- reg: I2C bus address of the device + +Optional Properties: +- reset-gpios: Sensor reset GPIO + +The imx274 device node should contain one 'port' child node with +an 'endpoint' subnode. For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio_sensor 0 0>; + port { + sensor_out: endpoint { + remote-endpoint = <&csiss_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt index 855e1faf73e2fb39cd9990b205d69f6ca1dcacc6..33f10a94c381c03dddfa80d5041800703de63c96 100644 --- a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt +++ b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt @@ -27,6 +27,8 @@ Optional properties - nokia,nvm-size: The size of the NVM, in bytes. If the size is not given, the NVM contents will not be read. - reset-gpios: XSHUTDOWN GPIO +- flash-leds: See ../video-interfaces.txt +- lens-focus: See ../video-interfaces.txt Endpoint node mandatory properties diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt index 46c15c54175d87cca499ceb81c33fdc6560df5b0..2a615d84a682563d28499b9a1f26a5ca2abcd984 100644 --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt @@ -68,7 +68,7 @@ vcodec_dec: vcodec@16000000 { "vdec_bus_clk_src"; }; - vcodec_enc: vcodec@0x18002000 { + vcodec_enc: vcodec@18002000 { compatible = "mediatek,mt8173-vcodec-enc"; reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/ <0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/ diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt index 6e4ef8caf759e5d31179c00120eccec349f3f8cd..19357d0bbe6539b3fbb7c73a4adbe4509fc905de 100644 --- a/Documentation/devicetree/bindings/media/rcar_vin.txt +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt @@ -44,7 +44,7 @@ Device node example vin0 = &vin0; }; - vin0: vin@0xe6ef0000 { + vin0: vin@e6ef0000 { compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; clocks = <&mstp8_clks R8A7790_CLK_VIN0>; reg = <0 0xe6ef0000 0 0x1000>; diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.txt b/Documentation/devicetree/bindings/media/rockchip-rga.txt new file mode 100644 index 0000000000000000000000000000000000000000..fd5276abfad6822e01632302c8dc7b883479cab1 --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip-rga.txt @@ -0,0 +1,33 @@ +device-tree bindings for rockchip 2D raster graphic acceleration controller (RGA) + +RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D +graphics operations, such as point/line drawing, image scaling, rotation, +BitBLT, alpha blending and image blur/sharpness. + +Required properties: +- compatible: value should be one of the following + "rockchip,rk3288-rga"; + "rockchip,rk3399-rga"; + +- interrupts: RGA interrupt specifier. + +- clocks: phandle to RGA sclk/hclk/aclk clocks + +- clock-names: should be "aclk", "hclk" and "sclk" + +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: should be "core", "axi" and "ahb" + +Example: +SoC-specific DT entry: + rga: rga@ff680000 { + compatible = "rockchip,rk3399-rga"; + reg = <0xff680000 0x10000>; + interrupts = ; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>; + clock-names = "aclk", "hclk", "sclk"; + + resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; + reset-names = "core, "axi", "ahb"; + }; diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt index e4e15d8d752157909e03344ee04ce7621ba5b967..48c599dacbdf7baafbc2cc3a64c170a44ba95313 100644 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt @@ -138,7 +138,7 @@ Example: }; /* MIPI CSI-2 bus IF sensor */ - s5c73m3: sensor@0x1a { + s5c73m3: sensor@1a { compatible = "samsung,s5c73m3"; reg = <0x1a>; vddio-supply = <...>; diff --git a/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt index 1ce4e46bcbb768a91ba16e27f19fa415769ee802..17a8e81ca0cc0ecd3749bc65a32abd7a4ce58bfb 100644 --- a/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt +++ b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt @@ -8,7 +8,7 @@ Bindings, specific for the sh_mobile_ceu_camera.c driver: Example: -ceu0: ceu@0xfe910000 { +ceu0: ceu@fe910000 { compatible = "renesas,sh-mobile-ceu"; reg = <0xfe910000 0xa0>; interrupt-parent = <&intcs>; diff --git a/Documentation/devicetree/bindings/media/tango-ir.txt b/Documentation/devicetree/bindings/media/tango-ir.txt new file mode 100644 index 0000000000000000000000000000000000000000..a9f00c2bf8970efa628267c1b5a03dc0aa5566af --- /dev/null +++ b/Documentation/devicetree/bindings/media/tango-ir.txt @@ -0,0 +1,21 @@ +Sigma Designs Tango IR NEC/RC-5/RC-6 decoder (SMP86xx and SMP87xx) + +Required properties: + +- compatible: "sigma,smp8642-ir" +- reg: address/size of NEC+RC5 area, address/size of RC6 area +- interrupts: spec for IR IRQ +- clocks: spec for IR clock (typically the crystal oscillator) + +Optional properties: + +- linux,rc-map-name: see Documentation/devicetree/bindings/media/rc.txt + +Example: + + ir@10518 { + compatible = "sigma,smp8642-ir"; + reg = <0x10518 0x18>, <0x105e0 0x1c>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + }; diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt new file mode 100644 index 0000000000000000000000000000000000000000..c503f06f3b844bba5b8bcab0a5c319fea2a7cc15 --- /dev/null +++ b/Documentation/devicetree/bindings/media/tegra-cec.txt @@ -0,0 +1,27 @@ +* Tegra HDMI CEC hardware + +The HDMI CEC module is present in Tegra SoCs and its purpose is to +handle communication between HDMI connected devices over the CEC bus. + +Required properties: + - compatible : value should be one of the following: + "nvidia,tegra114-cec" + "nvidia,tegra124-cec" + "nvidia,tegra210-cec" + - reg : Physical base address of the IP registers and length of memory + mapped region. + - interrupts : HDMI CEC interrupt number to the CPU. + - clocks : from common clock binding: handle to HDMI CEC clock. + - clock-names : from common clock binding: must contain "cec", + corresponding to the entry in the clocks property. + - hdmi-phandle : phandle to the HDMI controller, see also cec.txt. + +Example: + +cec@70015000 { + compatible = "nvidia,tegra124-cec"; + reg = <0x0 0x70015000 0x0 0x00001000>; + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_CEC>; + clock-names = "cec"; +}; diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index 852041a7480c0a8054489f54a15e6667a70c0dc6..258b8dfddf48c1e218b5e3e1a8a41b70b4baeeec 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -55,6 +55,15 @@ divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width and data-shift properties can be used to assign physical data lines to each endpoint node (logical bus). +Documenting bindings for devices +-------------------------------- + +All required and optional bindings the device supports shall be explicitly +documented in device DT binding documentation. This also includes port and +endpoint nodes for the device, including unit-addresses and reg properties where +relevant. + +Please also see Documentation/devicetree/bindings/graph.txt . Required properties ------------------- @@ -67,6 +76,16 @@ are required in a relevant parent node: identifier, should be 1. - #size-cells : should be zero. + +Optional properties +------------------- + +- flash-leds: An array of phandles, each referring to a flash LED, a sub-node + of the LED driver device node. + +- lens-focus: A phandle to the node of the focus lens controller. + + Optional endpoint properties ---------------------------- @@ -99,7 +118,10 @@ Optional endpoint properties determines the logical lane number, while the value of an entry indicates physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0. - This property is valid for serial busses only (e.g. MIPI CSI-2). + If the hardware does not support lane reordering, monotonically + incremented values shall be used from 0 or 1 onwards, depending on + whether or not there is also a clock lane. This property is valid for + serial busses only (e.g. MIPI CSI-2). - clock-lanes: an array of physical clock lane indexes. Position of an entry determines the logical lane number, while the value of an entry indicates physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;", @@ -132,7 +154,7 @@ imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a 'port' node which may indicate that at any time only one of the following data pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. - ceu0: ceu@0xfe910000 { + ceu0: ceu@fe910000 { compatible = "renesas,sh-mobile-ceu"; reg = <0xfe910000 0xa0>; interrupts = <0x880>; @@ -171,9 +193,9 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. }; }; - i2c0: i2c@0xfff20000 { + i2c0: i2c@fff20000 { ... - ov772x_1: camera@0x21 { + ov772x_1: camera@21 { compatible = "ovti,ov772x"; reg = <0x21>; vddio-supply = <®ulator1>; @@ -197,7 +219,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. }; }; - imx074: camera@0x1a { + imx074: camera@1a { compatible = "sony,imx074"; reg = <0x1a>; vddio-supply = <®ulator1>; @@ -217,7 +239,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. }; }; - csi2: csi2@0xffc90000 { + csi2: csi2@ffc90000 { compatible = "renesas,sh-mobile-csi2"; reg = <0xffc90000 0x1000>; interrupts = <0x17a0>; diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt new file mode 100644 index 0000000000000000000000000000000000000000..82d923ef413f92a6bc8c0887c91cfeb85b12dc02 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt @@ -0,0 +1,27 @@ +DDR PHY Front End (DPFE) for Broadcom STB +========================================= + +DPFE and the DPFE firmware provide an interface for the host CPU to +communicate with the DCPU, which resides inside the DDR PHY. + +There are three memory regions for interacting with the DCPU. These are +specified in a single reg property. + +Required properties: + - compatible: must be "brcm,bcm7271-dpfe-cpu", "brcm,bcm7268-dpfe-cpu" + or "brcm,dpfe-cpu" + - reg: must reference three register ranges + - start address and length of the DCPU register space + - start address and length of the DCPU data memory space + - start address and length of the DCPU instruction memory space + - reg-names: must contain "dpfe-cpu", "dpfe-dmem", and "dpfe-imem"; + they must be in the same order as the register declarations + +Example: + dpfe_cpu0: dpfe-cpu@f1132000 { + compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu"; + reg = <0xf1132000 0x180 + 0xf1134000 0x1000 + 0xf1138000 0x4000>; + reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem"; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 0db60470ebb6aa7f8d236afd4599166dafb0c11b..152eeccbde1ccd7f3e7686867404733c3f0f8a29 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -7,8 +7,10 @@ of the EMIF IP and memory parts attached to it. Required properties: - compatible : Should be of the form "ti,emif-" where - is the IP revision of the specific EMIF instance. - For am437x should be ti,emif-am4372. + is the IP revision of the specific EMIF instance. For newer controllers, + compatible should be one of the following: + "ti,emif-am3352" + "ti,emif-am4372" - phy-type : indicating the DDR phy type. Following are the allowed values @@ -44,7 +46,7 @@ Optional properties: Example: -emif1: emif@0x4c000000 { +emif1: emif@4c000000 { compatible = "ti,emif-4d"; ti,hwmods = "emif2"; phy-type = <1>; diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt index 4fc5b83726d6c6a6e90e971f9480f6851983d83d..ce8cf0ec6279a5ccc8aece96e4c85cc2aab46776 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt +++ b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt @@ -9,10 +9,16 @@ Required properties: "aspeed,g5-scu", "syscon", "simple-mfd" - reg: contains the offset and length of the SCU memory region +- #clock-cells: should be set to <1> - the system controller is also a + clock provider +- #reset-cells: should be set to <1> - the system controller is also a + reset line provider Example: syscon: syscon@1e6e2000 { compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; + #clock-cells = <1>; + #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt new file mode 100644 index 0000000000000000000000000000000000000000..82f82e069563cf9a559ea6c647b8aa9268a0dc15 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt @@ -0,0 +1,16 @@ +Broadcom iProc Chip Device Resource Unit (CDRU) + +Various Broadcom iProc SoCs have a set of registers that provide various +chip specific device and resource configurations. This node allows access to +these CDRU registers via syscon. + +Required properties: +- compatible: should contain: + "brcm,sr-cdru", "syscon" for Stingray +- reg: base address and range of the CDRU registers + +Example: + cdru: syscon@6641d000 { + compatible = "brcm,sr-cdru", "syscon"; + reg = <0 0x6641d000 0 0x400>; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt new file mode 100644 index 0000000000000000000000000000000000000000..4421e9771b8a2a7ca82b1208a7e7a5e8e334fc09 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt @@ -0,0 +1,18 @@ +Broadcom iProc Multi Host Bridge (MHB) + +Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls +the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint +interface; 3) access to the Nitro (network processing) engine + +This node allows access to these MHB registers via syscon. + +Required properties: +- compatible: should contain: + "brcm,sr-mhb", "syscon" for Stingray +- reg: base address and range of the MHB registers + +Example: + mhb: syscon@60401000 { + compatible = "brcm,sr-mhb", "syscon"; + reg = <0 0x60401000 0 0x38c>; + }; diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt index 6a1ae3a2b77f978d33515cb2bf5c08cecd44cc4d..e6754974a74594b8c969441fec6b08019b2c2167 100644 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ b/Documentation/devicetree/bindings/mfd/max77693.txt @@ -127,6 +127,12 @@ Required properties for the LED child node: Optional properties for the LED child node: - label : see Documentation/devicetree/bindings/leds/common.txt +Optional nodes: +- max77693-muic : + Node used only by extcon consumers. + Required properties: + - compatible : "maxim,max77693-muic" + Example: #include diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt index 39ba4146769deb9ab3549a0789bbb340e693e7ca..ac235fe385fc296e371fab835170c9e0b14a7ae1 100644 --- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt @@ -113,7 +113,6 @@ MC13892 regulators: Examples: ecspi@70010000 { /* ECSPI1 */ - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */ <&gpio4 25 0>; /* GPIO4_25 */ diff --git a/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt new file mode 100644 index 0000000000000000000000000000000000000000..21b9a897fca5db388efd2b688323846fcaace99b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt @@ -0,0 +1,40 @@ +Spreadtrum SC27xx Power Management Integrated Circuit (PMIC) + +The Spreadtrum SC27xx series PMICs contain SC2720, SC2721, SC2723, SC2730 +and SC2731. The Spreadtrum PMIC belonging to SC27xx series integrates all +mobile handset power management, audio codec, battery management and user +interface support function in a single chip. It has 6 major functional +blocks: +- DCDCs to support CPU, memory. +- LDOs to support both internal and external requirement. +- Battery management system, such as charger, fuel gauge. +- Audio codec. +- User interface function, such as indicator, flash LED and so on. +- IC level interface, such as power on/off control, RTC and typec and so on. + +Required properties: +- compatible: Should be one of the following: + "sprd,sc2720" + "sprd,sc2721" + "sprd,sc2723" + "sprd,sc2730" + "sprd,sc2731" +- reg: The address of the device chip select, should be 0. +- spi-max-frequency: Typically set to 26000000. +- interrupts: The interrupt line the device is connected to. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: The number of cells to describe an PMIC IRQ, must be 2. +- #address-cells: Child device offset number of cells, must be 1. +- #size-cells: Child device size number of cells, must be 0. + +Example: +pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt index 20963c76b4bcbd30d8d5081ddab600d1c78ef39a..71a1f5963936b855d2ec7fc195e754cf5ad6ec02 100644 --- a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt +++ b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt @@ -13,7 +13,7 @@ Required properties: Example: -devctrl: device-state-control@0x02620000 { +devctrl: device-state-control@02620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt index e4e1cd91fb1f2f9701d6df46da1b3461aaaa3a3d..356c29789cf54862e1ece93dc40449e221481304 100644 --- a/Documentation/devicetree/bindings/mips/brcm/soc.txt +++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt @@ -11,3 +11,156 @@ Required properties: The experimental -viper variants are for running Linux on the 3384's BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor. + +Power management +---------------- + +For power management (particularly, S2/S3/S5 system suspend), the following SoC +components are needed: + += Always-On control block (AON CTRL) + +This hardware provides control registers for the "always-on" (even in low-power +modes) hardware, such as the Power Management State Machine (PMSM). + +Required properties: +- compatible : should be one of + "brcm,bcm7425-aon-ctrl" + "brcm,bcm7429-aon-ctrl" + "brcm,bcm7435-aon-ctrl" and + "brcm,brcmstb-aon-ctrl" +- reg : the register start and length for the AON CTRL block + +Example: + +syscon@410000 { + compatible = "brcm,bcm7425-aon-ctrl", "brcm,brcmstb-aon-ctrl"; + reg = <0x410000 0x400>; +}; + += Memory controllers + +A Broadcom STB SoC typically has a number of independent memory controllers, +each of which may have several associated hardware blocks, which are versioned +independently (control registers, DDR PHYs, etc.). One might consider +describing these controllers as a parent "memory controllers" block, which +contains N sub-nodes (one for each controller in the system), each of which is +associated with a number of hardware register resources (e.g., its PHY. + +== MEMC (MEMory Controller) + +Represents a single memory controller instance. + +Required properties: +- compatible : should contain "brcm,brcmstb-memc" and "simple-bus" +- ranges : should contain the child address in the parent address + space, must be 0 here, and the register start and length of + the entire memory controller (including all sub nodes: DDR PHY, + arbiter, etc.) +- #address-cells : must be 1 +- #size-cells : must be 1 + +Example: + + memory-controller@0 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + ranges = <0x0 0x0 0xa000>; + #address-cells = <1>; + #size-cells = <1>; + + memc-arb@1000 { + ... + }; + + memc-ddr@2000 { + ... + }; + + ddr-phy@6000 { + ... + }; + }; + +Should contain subnodes for any of the following relevant hardware resources: + +== DDR PHY control + +Control registers for this memory controller's DDR PHY. + +Required properties: +- compatible : should contain one of these + "brcm,brcmstb-ddr-phy-v64.5" + "brcm,brcmstb-ddr-phy" + +- reg : the DDR PHY register range and length + +Example: + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v64.5"; + reg = <0x6000 0xc8>; + }; + +== DDR memory controller sequencer + +Control registers for this memory controller's DDR memory sequencer + +Required properties: +- compatible : should contain one of these + "brcm,bcm7425-memc-ddr" + "brcm,bcm7429-memc-ddr" + "brcm,bcm7435-memc-ddr" and + "brcm,brcmstb-memc-ddr" + +- reg : the DDR sequencer register range and length + +Example: + + memc-ddr@2000 { + compatible = "brcm,bcm7425-memc-ddr", "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x300>; + }; + +== MEMC Arbiter + +The memory controller arbiter is responsible for memory clients allocation +(bandwidth, priorities etc.) and needs to have its contents restored during +deep sleep states (S3). + +Required properties: + +- compatible : should contain one of these + "brcm,brcmstb-memc-arb-v10.0.0.0" + "brcm,brcmstb-memc-arb" + +- reg : the DDR Arbiter register range and length + +Example: + + memc-arb@1000 { + compatible = "brcm,brcmstb-memc-arb-v10.0.0.0"; + reg = <0x1000 0x248>; + }; + +== Timers + +The Broadcom STB chips contain a timer block with several general purpose +timers that can be used. + +Required properties: + +- compatible : should contain one of: + "brcm,bcm7425-timers" + "brcm,bcm7429-timers" + "brcm,bcm7435-timers and + "brcm,brcmstb-timers" +- reg : the timers register range +- interrupts : the interrupt line for this timer block + +Example: + + timers: timer@4067c0 { + compatible = "brcm,bcm7425-timers", "brcm,brcmstb-timers"; + reg = <0x4067c0 0x40>; + interrupts = <&periph_intc 19>; + }; diff --git a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt index 6c9f176f35717acf1a2fd3dcd7ca2cee86daeb88..05b47232ed9ed647a97df99e7b4c175352748fb6 100644 --- a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt +++ b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt @@ -9,7 +9,7 @@ Required properties: - reg : Location and size of bounce buffer Example: - smc@0x3404c000 { + smc@3404c000 { compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; reg = <0x3404c000 0x400>; //1 KiB in SRAM }; diff --git a/Documentation/devicetree/bindings/misc/ge-achc.txt b/Documentation/devicetree/bindings/misc/ge-achc.txt new file mode 100644 index 0000000000000000000000000000000000000000..77df94d7a32f57658976c87ab9dc0f33096fd7f1 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ge-achc.txt @@ -0,0 +1,26 @@ +* GE Healthcare USB Management Controller + +A device which handles data aquisition from compatible USB based peripherals. +SPI is used for device management. + +Note: This device does not expose the peripherals as USB devices. + +Required properties: + +- compatible : Should be "ge,achc" + +Required SPI properties: + +- reg : Should be address of the device chip select within + the controller. + +- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be + 1MHz for the GE ACHC. + +Example: + +spidev0: spi@0 { + compatible = "ge,achc"; + reg = <0>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt index aaba2483b4ff8c79f34030b28b3f546c03084032..7f5dd83f5bd95afd1b696e186681caae75c268b1 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt @@ -12,7 +12,7 @@ Refer to clocks/clock-bindings.txt for generic clock consumer properties. Example: -sdio2: sdio@0x3f1a0000 { +sdio2: sdio@3f1a0000 { compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x10000>; clocks = <&sdio3_clk>; diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt index 954561d09a8e6acca1cdfcd433c07da29027c1ca..fa90d253dc7ea00f79de2b7cb99477a87f1682b7 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt @@ -24,7 +24,7 @@ Optional properties: Example: -sdhci0: sdhci@0x18041000 { +sdhci0: sdhci@18041000 { compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x18041000 0x100>; interrupts = ; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index 3a4ac401e6f93a9d8ce3becd4d75410f95f1e50d..19f5508a75696b722624c550700ee74f72b2362f 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -55,7 +55,7 @@ Examples: [hwmod populated DMA resources] - mmc1: mmc@0x4809c000 { + mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; ti,hwmods = "mmc1"; @@ -67,7 +67,7 @@ Examples: [generic DMA request binding] - mmc1: mmc@0x4809c000 { + mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; ti,hwmods = "mmc1"; diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt index f248056da24cf87009861f9db7650955049278d6..bb2075df9b3826dd813dd23567ac470ffed5144e 100644 --- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt @@ -1,7 +1,9 @@ * Cadence Quad SPI controller Required properties: -- compatible : Should be "cdns,qspi-nor". +- compatible : should be one of the following: + Generic default - "cdns,qspi-nor". + For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor". - reg : Contains two entries, each of which is a tuple consisting of a physical address and length. The first entry is the address and length of the controller register set. The second entry is the @@ -14,6 +16,9 @@ Required properties: Optional properties: - cdns,is-decoded-cs : Flag to indicate whether decoder is used or not. +- cdns,rclk-en : Flag to indicate that QSPI return clock is used to latch + the read data rather than the QSPI clock. Make sure that QSPI return + clock is populated on the board before using this property. Optional subnodes: Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index 504291d2e5c2e5e02b880738c7f453b527dee63c..0ee8edb60efc6d07e106314b57fa1cbaa943ed4d 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -29,7 +29,7 @@ nand: nand@ff900000 { #address-cells = <1>; #size-cells = <1>; compatible = "altr,socfpga-denali-nand"; - reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; + reg = <0xff900000 0x20>, <0xffb80000 0x1000>; reg-names = "nand_data", "denali_reg"; interrupts = <0 144 4>; }; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt index 131d3a74d0bd453f48c3f31e5487db4e3c71c6e1..c8567b40fe13a02abaee0ffd2f037d0a4282a950 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt @@ -82,15 +82,15 @@ gpmc: gpmc@6e000000 { label = "bootloader-nor"; reg = <0 0x40000>; }; - partition@0x40000 { + partition@40000 { label = "params-nor"; reg = <0x40000 0x40000>; }; - partition@0x80000 { + partition@80000 { label = "kernel-nor"; reg = <0x80000 0x200000>; }; - partition@0x280000 { + partition@280000 { label = "filesystem-nor"; reg = <0x240000 0x7d80000>; }; diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt index 9ce35af8507c1da0a208fc1823b5d1d487909114..956bb046e599d576e3f881b2901e0d369a3c9802 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt @@ -13,6 +13,7 @@ Required properties: at25df321a at25df641 at26df081a + mr25h128 mr25h256 mr25h10 mr25h40 diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt index dbf9e054c11c0f3a68ba2783a042ca25e12d6b78..0431841de781334ce38aab9877ccd7a8d3698079 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt @@ -131,7 +131,7 @@ Example: read-only; reg = <0x00000000 0x00400000>; }; - android@0x00400000 { + android@00400000 { label = "android"; reg = <0x00400000 0x12c00000>; }; diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt index 840f9405dcf0736cc294c6432b8176421e34d609..56d3668e2c50e808fca1274436d151951f4ee6a1 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt @@ -1,13 +1,16 @@ * Serial NOR flash controller for MTK MT81xx (and similar) Required properties: -- compatible: The possible values are: - "mediatek,mt2701-nor" - "mediatek,mt7623-nor" +- compatible: For mt8173, compatible should be "mediatek,mt8173-nor", + and it's the fallback compatible for other Soc. + For every other SoC, should contain both the SoC-specific compatible + string and "mediatek,mt8173-nor". + The possible values are: + "mediatek,mt2701-nor", "mediatek,mt8173-nor" + "mediatek,mt2712-nor", "mediatek,mt8173-nor" + "mediatek,mt7622-nor", "mediatek,mt8173-nor" + "mediatek,mt7623-nor", "mediatek,mt8173-nor" "mediatek,mt8173-nor" - For mt8173, compatible should be "mediatek,mt8173-nor". - For every other SoC, should contain both the SoC-specific compatible string - and "mediatek,mt8173-nor". - reg: physical base address and length of the controller's register - clocks: the phandle of the clocks needed by the nor controller - clock-names: the names of the clocks diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt index d9b655f110489ba0be1877d6b0338066a1a767a6..d4ee4da584633c95e8ec584ae8e0644d5d05039b 100644 --- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt +++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt @@ -5,9 +5,13 @@ Required properties: - compatible: Should be set to one of the following: marvell,pxa3xx-nand marvell,armada370-nand + marvell,armada-8k-nand - reg: The register base for the controller - interrupts: The interrupt to map - #address-cells: Set to <1> if the node includes partitions + - marvell,system-controller: Set to retrieve the syscon node that handles + NAND controller related registers (only required + with marvell,armada-8k-nand compatible). Optional properties: diff --git a/Documentation/devicetree/bindings/net/altera_tse.txt b/Documentation/devicetree/bindings/net/altera_tse.txt index a706297998e9b48a5eb8924b0e622ae807532757..0e21df94a53ffa221e6262f4323dc2ff60068a00 100644 --- a/Documentation/devicetree/bindings/net/altera_tse.txt +++ b/Documentation/devicetree/bindings/net/altera_tse.txt @@ -52,7 +52,7 @@ Optional properties: Example: - tse_sub_0_eth_tse_0: ethernet@0x1,00000000 { + tse_sub_0_eth_tse_0: ethernet@1,00000000 { compatible = "altr,tse-msgdma-1.0"; reg = <0x00000001 0x00000000 0x00000400>, <0x00000001 0x00000460 0x00000020>, @@ -90,7 +90,7 @@ Example: }; }; - tse_sub_1_eth_tse_0: ethernet@0x1,00001000 { + tse_sub_1_eth_tse_0: ethernet@1,00001000 { compatible = "altr,tse-msgdma-1.0"; reg = <0x00000001 0x00001000 0x00000400>, <0x00000001 0x00001460 0x00000020>, diff --git a/Documentation/devicetree/bindings/net/bluetooth.txt b/Documentation/devicetree/bindings/net/bluetooth.txt new file mode 100644 index 0000000000000000000000000000000000000000..94797df751b870b3e073103ba9927139ac9897c9 --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth.txt @@ -0,0 +1,5 @@ +The following properties are common to the Bluetooth controllers: + +- local-bd-address: array of 6 bytes, specifies the BD address that was + uniquely assigned to the Bluetooth device, formatted with least significant + byte first (little-endian). diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt index 4448d063ddf6c96402d3773ba1280c37fb5b692e..464d6bf87605392a5302349abf7b54e673ed5dc1 100644 --- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt +++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt @@ -52,7 +52,7 @@ I2C managed mode: port@1 { /* external port 1 */ reg = <1>; - label = "lan1; + label = "lan1"; }; port@2 { /* external port 2 */ @@ -89,7 +89,7 @@ MDIO managed mode: port@1 { /* external port 1 */ reg = <1>; - label = "lan1; + label = "lan1"; }; port@2 { /* external port 2 */ diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt new file mode 100644 index 0000000000000000000000000000000000000000..3d6d5fa0c4d5fc670d8bec94e53a0f07a0a2e013 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt @@ -0,0 +1,207 @@ +* Allwinner sun8i GMAC ethernet controller + +This device is a platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +Required properties: +- compatible: must be one of the following string: + "allwinner,sun8i-a83t-emac" + "allwinner,sun8i-h3-emac" + "allwinner,sun8i-v3s-emac" + "allwinner,sun50i-a64-emac" +- reg: address and length of the register for the device. +- interrupts: interrupt for the device +- interrupt-names: must be "macirq" +- clocks: A phandle to the reference clock for this device +- clock-names: must be "stmmaceth" +- resets: A phandle to the reset control for this device +- reset-names: must be "stmmaceth" +- phy-mode: See ethernet.txt +- phy-handle: See ethernet.txt +- #address-cells: shall be 1 +- #size-cells: shall be 0 +- syscon: A phandle to the syscon of the SoC with one of the following + compatible string: + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller + - allwinner,sun8i-a83t-system-controller + +Optional properties: +- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0) +- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0) +Both delay properties need to be a multiple of 100. They control the delay for +external PHY. + +Optional properties for the following compatibles: + - "allwinner,sun8i-h3-emac", + - "allwinner,sun8i-v3s-emac": +- allwinner,leds-active-low: EPHY LEDs are active low + +Required child node of emac: +- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio" + +Required properties of the mdio node: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + +The device node referenced by "phy" or "phy-handle" must be a child node +of the mdio node. See phy.txt for the generic PHY bindings. + +The following compatibles require that the emac node have a mdio-mux child +node called "mdio-mux": + - "allwinner,sun8i-h3-emac" + - "allwinner,sun8i-v3s-emac": +Required properties for the mdio-mux node: + - compatible = "allwinner,sun8i-h3-mdio-mux" + - mdio-parent-bus: a phandle to EMAC mdio + - one child mdio for the integrated mdio with the compatible + "allwinner,sun8i-h3-mdio-internal" + - one child mdio for the external mdio if present (V3s have none) +Required properties for the mdio-mux children node: + - reg: 1 for internal MDIO bus, 2 for external MDIO bus + +The following compatibles require a PHY node representing the integrated +PHY, under the integrated MDIO bus node if an mdio-mux node is used: + - "allwinner,sun8i-h3-emac", + - "allwinner,sun8i-v3s-emac": + +Additional information regarding generic multiplexer properties can be found +at Documentation/devicetree/bindings/net/mdio-mux.txt + +Required properties of the integrated phy node: +- clocks: a phandle to the reference clock for the EPHY +- resets: a phandle to the reset control for the EPHY +- Must be a child of the integrated mdio + +Example with integrated PHY: +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = ; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + + int_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + phy-is-integrated; + }; + }; + ext_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +Example with external PHY: +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = ; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + allwinner,leds-active-low; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + + int_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + ext_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }: + }; +}; + +Example with SoC without integrated PHY + +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-a83t-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = ; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 6f55bdd52f8a99be3c0741cf6411a00554c85778..f0dc94409107130d1279c2144c50eec7be122633 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -34,6 +34,19 @@ Optional properties: - fsl,err006687-workaround-present: If present indicates that the system has the hardware workaround for ERR006687 applied and does not need a software workaround. + -interrupt-names: names of the interrupts listed in interrupts property in + the same order. The defaults if not specified are + __Number of interrupts__ __Default__ + 1 "int0" + 2 "int0", "pps" + 3 "int0", "int1", "int2" + 4 "int0", "int1", "int2", "pps" + The order may be changed as long as they correspond to the interrupts + property. Currently, only i.mx7 uses "int1" and "int2". They correspond to + tx/rx queues 1 and 2. "int0" will be used for queue 0 and ENET_MII interrupts. + For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse + per second interrupt associated with 1588 precision time protocol(PTP). + Optional subnodes: - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt index 96a53f89aa6e2fa7f9a0d4c6c3b18d03a3b75994..e3e1603f256c1a55ce956a403fce855e7bf58e0e 100644 --- a/Documentation/devicetree/bindings/net/mdio.txt +++ b/Documentation/devicetree/bindings/net/mdio.txt @@ -18,7 +18,7 @@ Example : This example shows these optional properties, plus other properties required for the TI Davinci MDIO driver. - davinci_mdio: ethernet@0x5c030000 { + davinci_mdio: ethernet@5c030000 { compatible = "ti,davinci_mdio"; reg = <0x5c030000 0x1000>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 16723535e1aa7cee73517739cfee3136f933fe29..c902261893b913f529b1ec8d9852048f9d711e59 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -17,6 +17,8 @@ Required properties: - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - "renesas,etheravb-r8a7796" for the R8A7796 SoC. + - "renesas,etheravb-r8a77970" for the R8A77970 SoC. + - "renesas,etheravb-r8a77995" for the R8A77995 SoC. - "renesas,etheravb-rcar-gen3" as a fallback for the above R-Car Gen3 devices. @@ -40,7 +42,7 @@ Optional properties: - interrupt-parent: the phandle for the interrupt controller that services interrupts for this device. - interrupt-names: A list of interrupt names. - For the R8A779[56] SoCs this property is mandatory; + For the R-Car Gen 3 SoCs this property is mandatory; it should include one entry per channel, named "ch%u", where %u is the channel number ranging from 0 to 24. For other SoCs this property is optional; if present diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt index 0115c85a2425a148c011a77dd94bfb404382ff17..5172799a7f1a478d4eb0e834a8672806d87509e7 100644 --- a/Documentation/devicetree/bindings/net/sh_eth.txt +++ b/Documentation/devicetree/bindings/net/sh_eth.txt @@ -4,7 +4,8 @@ This file provides information on what the device node for the SH EtherMAC interface contains. Required properties: -- compatible: "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC. +- compatible: Must contain one or more of the following: + "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC. "renesas,ether-r8a7743" if the device is a part of R8A7743 SoC. "renesas,ether-r8a7745" if the device is a part of R8A7745 SoC. "renesas,ether-r8a7778" if the device is a part of R8A7778 SoC. @@ -14,6 +15,14 @@ Required properties: "renesas,ether-r8a7793" if the device is a part of R8A7793 SoC. "renesas,ether-r8a7794" if the device is a part of R8A7794 SoC. "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC. + "renesas,rcar-gen1-ether" for a generic R-Car Gen1 device. + "renesas,rcar-gen2-ether" for a generic R-Car Gen2 or RZ/G1 + device. + + When compatible with the generic version, nodes must list + the SoC-specific version corresponding to the platform + first followed by the generic version. + - reg: offset and length of (1) the E-DMAC/feLic register block (required), (2) the TSU register block (optional). - interrupts: interrupt specifier for the sole interrupt. @@ -36,7 +45,8 @@ Optional properties: Example (Lager board): ethernet@ee700000 { - compatible = "renesas,ether-r8a7790"; + compatible = "renesas,ether-r8a7790", + "renesas,rcar-gen2-ether"; reg = <0 0xee700000 0 0x400>; interrupt-parent = <&gic>; interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt index b30d04b54ee94f93910421caca3badda8fcae01e..17d6819669c8ccee0186f4dc797be638a1828097 100644 --- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt +++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt @@ -28,7 +28,7 @@ Required properties: Example: -gmii_to_sgmii_converter: phy@0x100000240 { +gmii_to_sgmii_converter: phy@100000240 { compatible = "altr,gmii-to-sgmii-2.0"; reg = <0x00000001 0x00000240 0x00000008>, <0x00000001 0x00000200 0x00000040>; diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index c3a7be6615c547a5001c67996e18458b7f8e5b5d..3a28a5d8857d16049815a86d6bcd047a372f98ba 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -12,7 +12,7 @@ Required properties: Valid interrupt names are: - "macirq" (combined signal for various interrupt events) - "eth_wake_irq" (the interrupt to manage the remote wake-up packet detection) - - "eth_lpi" (the interrupt that occurs when Tx or Rx enters/exits LPI state) + - "eth_lpi" (the interrupt that occurs when Rx exits the LPI state) - phy-mode: See ethernet.txt file in the same directory. - snps,reset-gpio gpio number for phy reset. - snps,reset-active-low boolean flag to indicate if phy reset is active low. diff --git a/Documentation/devicetree/bindings/nios2/nios2.txt b/Documentation/devicetree/bindings/nios2/nios2.txt index d6d0a94cb3bbba6634a1c365df92670c84499a94..b95e831bcba3f9824bebf3ce75ee11c2a0b4f203 100644 --- a/Documentation/devicetree/bindings/nios2/nios2.txt +++ b/Documentation/devicetree/bindings/nios2/nios2.txt @@ -36,7 +36,7 @@ Optional properties: Example: -cpu@0x0 { +cpu@0 { device_type = "cpu"; compatible = "altr,nios2-1.0"; reg = <0>; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt index 081c49c0dac06e11f0e18e74006fde6ff489aee0..d69543701d5d58dad79bf41772eb1426d8f4efee 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -5,6 +5,7 @@ Required properties: "allwinner,sun4i-a10-sid" "allwinner,sun7i-a20-sid" "allwinner,sun8i-h3-sid" + "allwinner,sun50i-a64-sid" - reg: Should contain registers location and length diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt index fafd85bd67a68575749975fc00642f7272cdf8fa..e3298e18de26b55580a8ec5e1241a8d32060d330 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt @@ -1,4 +1,4 @@ -= Amlogic eFuse device tree bindings = += Amlogic Meson GX eFuse device tree bindings = Required properties: - compatible: should be "amlogic,meson-gxbb-efuse" diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt new file mode 100644 index 0000000000000000000000000000000000000000..a3c63954a1a4e7dc66fd09373e8af6e13469ef5d --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt @@ -0,0 +1,22 @@ +Amlogic Meson6/Meson8/Meson8b efuse + +Required Properties: +- compatible: depending on the SoC this should be one of: + - "amlogic,meson6-efuse" + - "amlogic,meson8-efuse" + - "amlogic,meson8b-efuse" +- reg: base address and size of the efuse registers +- clocks: a reference to the efuse core gate clock +- clock-names: must be "core" + +All properties and sub-nodes as well as the consumer bindings +defined in nvmem.txt in this directory are also supported. + + +Example: + efuse: nvmem@0 { + compatible = "amlogic,meson8-efuse"; + reg = <0x0 0x2000>; + clocks = <&clkc CLKID_EFUSE>; + clock-names = "core"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt index 1ff02afdc55a8afab456daa3b17dce7c2a97263c..60bec47828066cdd45c5104b126a6fbcb7a978f3 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt @@ -6,6 +6,7 @@ Required properties: - "rockchip,rk3188-efuse" - for RK3188 SoCs. - "rockchip,rk3228-efuse" - for RK3228 SoCs. - "rockchip,rk3288-efuse" - for RK3288 SoCs. + - "rockchip,rk3368-efuse" - for RK3368 SoCs. - "rockchip,rk3399-efuse" - for RK3399 SoCs. - reg: Should contain the registers location and exact eFuse size - clocks: Should be the clock id of eFuse diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt new file mode 100644 index 0000000000000000000000000000000000000000..20bc49b49799dfa75b68ce910fd5f2d1b5700aad --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt @@ -0,0 +1,20 @@ +Device tree bindings for Low Power General Purpose Register found in i.MX6Q/D +Secure Non-Volatile Storage. + +This DT node should be represented as a sub-node of a "syscon", +"simple-mfd" node. + +Required properties: +- compatible: should be one of the fallowing variants: + "fsl,imx6q-snvs-lpgpr" for Freescale i.MX6Q/D/DL/S + "fsl,imx6ul-snvs-lpgpr" for Freescale i.MX6UL + +Example: +snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx6q-snvs-lpgpr"; + }; +}; diff --git a/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt b/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt new file mode 100644 index 0000000000000000000000000000000000000000..eccf490d5a6d5dbeec7a78ae23db5ea088f1818c --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt @@ -0,0 +1,49 @@ += UniPhier eFuse device tree bindings = + +This UniPhier eFuse must be under soc-glue. + +Required properties: +- compatible: should be "socionext,uniphier-efuse" +- reg: should contain the register location and length + += Data cells = +Are child nodes of efuse, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + soc-glue@5f900000 { + compatible = "socionext,uniphier-ld20-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x68>; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + usb_mon: usb-mon@54 { + reg = <0x54 0xc>; + }; + }; + }; + += Data consumers = +Are device nodes which consume nvmem data cells. + +Example: + + usb { + ... + nvmem-cells = <&usb_mon>; + nvmem-cell-names = "usb_mon"; + } diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt index 495880193adc8c9e9403b5fda893df580718630c..a1dc9366a8fcac6683c99d4d1aeb961b836d44cc 100644 --- a/Documentation/devicetree/bindings/pci/altera-pcie.txt +++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt @@ -25,7 +25,7 @@ Optional properties: - bus-range: PCI bus numbers covered Example - pcie_0: pcie@0xc00000000 { + pcie_0: pcie@c00000000 { compatible = "altr,pcie-root-port-1.0"; reg = <0xc0000000 0x20000000>, <0xff220000 0x00004000>; diff --git a/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt b/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt new file mode 100644 index 0000000000000000000000000000000000000000..515b2f9542e548d7bb4dbc631307bcbe8bb304df --- /dev/null +++ b/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt @@ -0,0 +1,42 @@ +* Synopsys DesignWare PCIe root complex in ECAM shift mode + +In some cases, firmware may already have configured the Synopsys DesignWare +PCIe controller in RC mode with static ATU window mappings that cover all +config, MMIO and I/O spaces in a [mostly] ECAM compatible fashion. +In this case, there is no need for the OS to perform any low level setup +of clocks, PHYs or device registers, nor is there any reason for the driver +to reconfigure ATU windows for config and/or IO space accesses at runtime. + +In cases where the IP was synthesized with a minimum ATU window size of +64 KB, it cannot be supported by the generic ECAM driver, because it +requires special config space accessors that filter accesses to device #1 +and beyond on the first bus. + +Required properties: +- compatible: "marvell,armada8k-pcie-ecam" or + "socionext,synquacer-pcie-ecam" or + "snps,dw-pcie-ecam" (must be preceded by a more specific match) + +Please refer to the binding document of "pci-host-ecam-generic" in the +file host-generic-pci.txt for a description of the remaining required +and optional properties. + +Example: + + pcie1: pcie@7f000000 { + compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam"; + device_type = "pci"; + reg = <0x0 0x7f000000 0x0 0xf00000>; + bus-range = <0x0 0xe>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x1000000 0x00 0x00010000 0x00 0x7ff00000 0x0 0x00010000>, + <0x2000000 0x00 0x70000000 0x00 0x70000000 0x0 0x0f000000>, + <0x3000000 0x3f 0x00000000 0x3f 0x00000000 0x1 0x00000000>; + + #interrupt-cells = <0x1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 0x0 182 0x4>; + msi-map = <0x0 &its 0x0 0x10000>; + dma-coherent; + }; diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index 7b1e48bf172b74ba51755409cf8510dc0a15fb6d..149d8f7f86b06ed943b7c0c1331d777a593db55f 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -52,7 +52,7 @@ Additional required properties for imx7d-pcie: Example: - pcie@0x01000000 { + pcie@01000000 { compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; reg = <0x01ffc000 0x04000>, <0x01f00000 0x80000>; diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt new file mode 100644 index 0000000000000000000000000000000000000000..c84bc027930b903bfaa3413f00daff061f39c366 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt @@ -0,0 +1,68 @@ +HiSilicon STB PCIe host bridge DT description + +The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core. +It shares common functions with the DesignWare PCIe core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/designware-pcie.txt. + +Additional properties are described here: + +Required properties +- compatible: Should be one of the following strings: + "hisilicon,hi3798cv200-pcie" +- reg: Should contain sysctl, rc_dbi, config registers location and length. +- reg-names: Must include the following entries: + "control": control registers of PCIe controller; + "rc-dbi": configuration space of PCIe controller; + "config": configuration transaction space of PCIe controller. +- bus-range: PCI bus numbers covered. +- interrupts: MSI interrupt. +- interrupt-names: Must include "msi" entries. +- clocks: List of phandle and clock specifier pairs as listed in clock-names + property. +- clock-name: Must include the following entries: + "aux": auxiliary gate clock; + "pipe": pipe gate clock; + "sys": sys gate clock; + "bus": bus gate clock. +- resets: List of phandle and reset specifier pairs as listed in reset-names + property. +- reset-names: Must include the following entries: + "soft": soft reset; + "sys": sys reset; + "bus": bus reset. + +Optional properties: +- reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal. +- phys: List of phandle and phy mode specifier, should be 0. +- phy-names: Must be "phy". + +Example: + pcie@f9860000 { + compatible = "hisilicon,hi3798cv200-pcie"; + reg = <0xf9860000 0x1000>, + <0xf0000000 0x2000>, + <0xf2000000 0x01000000>; + reg-names = "control", "rc-dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0 15>; + num-lanes = <1>; + ranges=<0x81000000 0 0 0xf4000000 0 0x00010000 + 0x82000000 0 0xf3000000 0xf3000000 0 0x01000000>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg PCIE_AUX_CLK>, + <&crg PCIE_PIPE_CLK>, + <&crg PCIE_SYS_CLK>, + <&crg PCIE_BUS_CLK>; + clock-names = "aux", "pipe", "sys", "bus"; + resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>; + reset-names = "soft", "sys", "bus"; + phys = <&combphy1 PHY_TYPE_PCIE>; + phy-names = "phy"; + }; diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index bdb7ab39d2d7effafede0803adef4eeef1d9bf9a..7bf9df047a1ee4992ee7f8b9f8e3f742b26bc8a0 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -21,7 +21,7 @@ Optional properties: - dma-coherent: Present if DMA operations are coherent. Hip05 Example (note that Hip06 is the same except compatible): - pcie@0xb0080000 { + pcie@b0080000 { compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; reg-names = "rc_dbi", "config"; diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index c0484da0f20d9d87f3be44f9bfd844362820bb59..66df1e81e0b8d218ad39396e41be2c2d2e504f5c 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -18,6 +18,7 @@ Required properties: "fsl,ls2088a-pcie" "fsl,ls1088a-pcie" "fsl,ls1046a-pcie" + "fsl,ls1012a-pcie" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt index 1b4d2803dad1dbc4d69492adb1d0bcf0998362e7..145a4f04194fa053f069e478bad6f0a59feb00b1 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -1,10 +1,15 @@ NVIDIA Tegra PCIe controller Required properties: -- compatible: For Tegra20, must contain "nvidia,tegra20-pcie". For Tegra30, - "nvidia,tegra30-pcie". For Tegra124, must contain "nvidia,tegra124-pcie". - Otherwise, must contain "nvidia,-pcie", plus one of the above, where - is tegra132 or tegra210. +- compatible: Must be: + - "nvidia,tegra20-pcie": for Tegra20 + - "nvidia,tegra30-pcie": for Tegra30 + - "nvidia,tegra124-pcie": for Tegra124 and Tegra132 + - "nvidia,tegra210-pcie": for Tegra210 + - "nvidia,tegra186-pcie": for Tegra186 +- power-domains: To ungate power partition by BPMP powergate driver. Must + contain BPMP phandle and PCIe power partition ID. This is required only + for Tegra186. - device_type: Must be "pci" - reg: A list of physical base address and length for each set of controller registers. Must contain an entry for each entry in the reg-names property. @@ -124,6 +129,16 @@ Power supplies for Tegra210: - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must supply 1.8 V. +Power supplies for Tegra186: +- Required: + - dvdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. + - hvdd-pex-pll-supply: High-voltage supply for PLLE (shared with USB3). Must + supply 1.8 V. + - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks. + Must supply 1.8 V. + - vddio-pexctl-aud-supply: Power supply for PCIe side band signals. Must + supply 1.8 V. + Root ports are defined as subnodes of the PCIe controller node. Required properties: @@ -546,3 +561,114 @@ Board DTS: status = "okay"; }; }; + +Tegra186: +--------- + +SoC DTSI: + + pcie@10003000 { + compatible = "nvidia,tegra186-pcie"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>; + device_type = "pci"; + reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x10003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x40000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */ + 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */ + 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */ + 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */ + + clocks = <&bpmp TEGRA186_CLK_AFI>, + <&bpmp TEGRA186_CLK_PCIE>, + <&bpmp TEGRA186_CLK_PLLE>; + clock-names = "afi", "pex", "pll_e"; + + resets = <&bpmp TEGRA186_RESET_AFI>, + <&bpmp TEGRA186_RESET_PCIE>, + <&bpmp TEGRA186_RESET_PCIEXCLK>; + reset-names = "afi", "pex", "pcie_x"; + + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>; + reg = <0x001800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + +Board DTS: + + pcie@10003000 { + status = "okay"; + + dvdd-pex-supply = <&vdd_pex>; + hvdd-pex-pll-supply = <&vdd_1v8>; + hvdd-pex-supply = <&vdd_1v8>; + vddio-pexctl-aud-supply = <&vdd_1v8>; + + pci@1,0 { + nvidia,num-lanes = <4>; + status = "okay"; + }; + + pci@2,0 { + nvidia,num-lanes = <0>; + status = "disabled"; + }; + + pci@3,0 { + nvidia,num-lanes = <1>; + status = "disabled"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt index 3d038638612b8ec2af704adaf6dcd5b0bc81b1e6..9fe7e12a7bf37b7c874a3e93bea590452845d093 100644 --- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt +++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt @@ -60,17 +60,15 @@ Example SoC configuration: 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; - pci@0,1 { + usb@1,0 { reg = <0x800 0 0 0 0>; - device_type = "pci"; - phys = <&usbphy 0 0>; + phys = <&usb0 0>; phy-names = "usb"; }; - pci@0,2 { + usb@2,0 { reg = <0x1000 0 0 0 0>; - device_type = "pci"; - phys = <&usbphy 0 0>; + phys = <&usb0 0>; phy-names = "usb"; }; }; diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt index 30b364e504ba9942ac316eaf0afc1132a83cd255..11063293f76190dd9662849bf97c9abe5e61624d 100644 --- a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt +++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt @@ -2,14 +2,75 @@ V3 Semiconductor V360 EPC PCI bridge This bridge is found in the ARM Integrator/AP (Application Platform) -Integrator-specific notes: +Required properties: +- compatible: should be one of: + "v3,v360epc-pci" + "arm,integrator-ap-pci", "v3,v360epc-pci" +- reg: should contain two register areas: + first the base address of the V3 host bridge controller, 64KB + second the configuration area register space, 16MB +- interrupts: should contain a reference to the V3 error interrupt + as routed on the system. +- bus-range: see pci.txt +- ranges: this follows the standard PCI bindings in the IEEE Std + 1275-1994 (see pci.txt) with the following restriction: + - The non-prefetchable and prefetchable memory windows must + each be exactly 256MB (0x10000000) in size. + - The prefetchable memory window must be immediately adjacent + to the non-prefetcable memory window +- dma-ranges: three ranges for the inbound memory region. The ranges must + be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, + 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked + as pre-fetchable. Two ranges are supported by the hardware. -- syscon: should contain a link to the syscon device node (since +Integrator-specific required properties: +- syscon: should contain a link to the syscon device node, since on the Integrator, some registers in the syscon are required to - operate the V3). + operate the V3 host bridge. -V360 EPC specific notes: +Example: -- reg: should contain the base address of the V3 adapter. -- interrupts: should contain a reference to the V3 error interrupt - as routed on the system. +pci: pciv3@62000000 { + compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; + interrupt-parent = <&pic>; + interrupts = <17>; /* Bus error IRQ */ + clocks = <&pciclk>; + bus-range = <0x00 0xff>; + ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */ + 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */ + 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ + 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ + 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ + 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ + dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ + 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */ + 0x02000000 0 0x80000000 /* Core module alias memory */ + 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */ + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = < + /* IDSEL 9 */ + 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */ + 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */ + 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */ + 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */ + /* IDSEL 10 */ + 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */ + 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */ + 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */ + 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */ + /* IDSEL 11 */ + 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */ + 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */ + 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */ + 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */ + /* IDSEL 12 */ + 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */ + 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */ + 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */ + 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */ + >; +}; diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index cbc7847dbf6c59ffeb845f95682d9b9a427d81b8..c1ce5a0a652ecbbbb9e61b251b6d41eaad52433f 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -45,7 +45,7 @@ Optional properties: - usb3_vbus-supply : regulator phandle for controller usb3 vbus Example: - usbphy: phy@0x01c13400 { + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; /* phy base regs, phy1 pmu reg, phy2 pmu reg */ diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt index 3600d5c6c4d7d5372f405fbd4c146e41dfa24071..3914529a3214b61b6dbc8c2fa6e49cd90bc8d6a5 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt @@ -25,7 +25,7 @@ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt For example: - pinmux: pinmux@0x0301d0c8 { + pinmux: pinmux@0301d0c8 { compatible = "brcm,cygnus-pinmux"; reg = <0x0301d0c8 0x1b0>; diff --git a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt index 61466c58faae3b0ed384fe08cd7e1604fdd9f2e1..d857b67fab72a61fcf85b8eed6fd389883d4c097 100644 --- a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt @@ -9,8 +9,14 @@ The pin controller node must be a subnode of the system controller node. Required properties: - compatible: "cortina,gemini-pinctrl" -Subnodes of the pin controller contain pin control multiplexing set-up. -Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes. +Subnodes of the pin controller contain pin control multiplexing set-up +and pin configuration of individual pins. + +Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes +and generic pin config nodes. + +Supported configurations: +- skew-delay is supported on the Ethernet pins Example: diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt index f64060908d5ae173e39ec3440f9bbdd3350065ef..c7c088d2dd503df005904b46a486d75e437e37e9 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt @@ -97,8 +97,8 @@ group spi_quad - pins 15-16 - functions spi, gpio -group uart_2 - - pins 9-10 +group uart2 + - pins 9-10 and 18-19 - functions uart, gpio Available groups and functions for the South bridge: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt index eecf028ff4854bbe994b6232a7f88890e759d3cf..bf9b07016c8730f29a199e100065d19e90e9200a 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt @@ -96,14 +96,14 @@ For example, pinctrl might have subnodes like the following: For a specific board, if it wants to use sd1, it can add the following to its board-specific .dts file. -sd1: sd@0x12340000 { +sd1: sd@12340000 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pmx0>; } or -sd1: sd@0x12340000 { +sd1: sd@12340000 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pmx1>; } diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 4483cc31e5310a234a075d34b879f957596846fc..ad9bbbba36e9d529481f1d9b265b29dbf15d372c 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -271,6 +271,10 @@ output-high - set the pin to output mode with high level sleep-hardware-state - indicate this is sleep related state which will be programmed into the registers for the sleep state. slew-rate - set the slew rate +skew-delay - this affects the expected clock skew on input pins + and the delay before latching a value to an output + pin. Typically indicates how many double-inverters are + used to delay the signal. For example: diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt similarity index 66% rename from Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt rename to Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index c934106b10aa2828baf2c71f42c080a02a0b122a..9c451c20dda47c390101024dc247b10f0d7f5c10 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -13,6 +13,7 @@ Required properties: - "microchip,mcp23s18" for 16 GPIO SPI version - "microchip,mcp23008" for 8 GPIO I2C version or - "microchip,mcp23017" for 16 GPIO I2C version of the chip + - "microchip,mcp23018" for 16 GPIO I2C version NOTE: Do not use the old mcp prefix any more. It is deprecated and will be removed. - #gpio-cells : Should be two. @@ -81,3 +82,61 @@ gpiom1: gpio@0 { reg = <0>; spi-max-frequency = <1000000>; }; + +Pull-up configuration +===================== + +If pins are used as output, they can also be configured with pull-ups. This is +done with pinctrl. + +Please refer file +for details of the common pinctrl bindings used by client devices, +including the meaning of the phrase "pin configuration node". + +Optional Pinmux properties: +-------------------------- +Following properties are required if default setting of pins are required +at boot. +- pinctrl-names: A pinctrl state named per . +- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per + . + +The pin configurations are defined as child of the pinctrl states node. Each +sub-node have following properties: + +Required properties: +------------------ +- pins: List of pins. Valid values of pins properties are: + gpio0 ... gpio7 for the devices with 8 GPIO pins and + gpio0 ... gpio15 for the devices with 16 GPIO pins. + +Optional properties: +------------------- +The following optional property is defined in the pinmux DT binding document +. Absence of this property will leave the configuration +in its default state. + bias-pull-up + +Example with pinctrl to pull-up output pins: +gpio21: gpio@21 { + compatible = "microchip,mcp23017"; + gpio-controller; + #gpio-cells = <0x2>; + reg = <0x21>; + interrupt-parent = <&socgpio>; + interrupts = <0x17 0x8>; + interrupt-names = "mcp23017@21 irq"; + interrupt-controller; + #interrupt-cells = <0x2>; + microchip,irq-mirror; + pinctrl-names = "default"; + pinctrl-0 = <&i2cgpio0irq &gpio21pullups>; + + gpio21pullups: pinmux { + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", "gpio15"; + bias-pull-up; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt index 5f55be59d914a33aa71f4f432237782fd45f46ad..f8420520e14bf6d48467585c8260455f12da1540 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt @@ -41,7 +41,7 @@ For example, pinctrl might have subnodes like the following: For a specific board, if it wants to use uart2 without hardware flow control, it can add the following to its board-specific .dts file. -uart2: uart@0xb0070000 { +uart2: uart@b0070000 { pinctrl-names = "default"; pinctrl-0 = <&uart2_noflow_pins_a>; } diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 5b12c57e7f022e58ba262191246f23b4852cc7df..5c25fcb29fb5e636685539d50133d14a7c6aebc2 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -15,6 +15,7 @@ PMIC's from Qualcomm. "qcom,pm8921-gpio" "qcom,pm8941-gpio" "qcom,pm8994-gpio" + "qcom,pmi8994-gpio" "qcom,pma8084-gpio" "qcom,pmi8994-gpio" @@ -85,6 +86,7 @@ to specify in a pin configuration subnode: gpio1-gpio44 for pm8921 gpio1-gpio36 for pm8941 gpio1-gpio22 for pm8994 + gpio1-gpio10 for pmi8994 gpio1-gpio22 for pma8084 gpio1-gpio10 for pmi8994 diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt index 43e21474528a4158f77f6b94bddfa57f1a1fa7f5..fd3696eb36bf307e00f061cc8f5329d2afa8594c 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt @@ -12,8 +12,10 @@ Pin controller node ------------------- Required properties: - - compatible - this shall be "renesas,r7s72100-ports". + - compatible: should be: + - "renesas,r7s72100-ports": for RZ/A1H + - "renesas,r7s72101-ports", "renesas,r7s72100-ports": for RZ/A1M + - "renesas,r7s72102-ports": for RZ/A1L - reg address base and length of the memory area where the pin controller diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index 4864e3a74de311ff02e6f3c54a04ae2fbba5ae2d..a01a3b8a23632a8707ff9e528c6c010500d8da9a 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -136,7 +136,7 @@ Example for rk3188: #size-cells = <1>; ranges; - gpio0: gpio0@0x2000a000 { + gpio0: gpio0@2000a000 { compatible = "rockchip,rk3188-gpio-bank0"; reg = <0x2000a000 0x100>; interrupts = ; @@ -149,7 +149,7 @@ Example for rk3188: #interrupt-cells = <2>; }; - gpio1: gpio1@0x2003c000 { + gpio1: gpio1@2003c000 { compatible = "rockchip,gpio-bank"; reg = <0x2003c000 0x100>; interrupts = ; diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index 33e3d3c475526e404a8b03c7769aa66d61b88e3e..58c2a4c229db18db99c09bbd88eb6d015183421e 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -143,6 +143,24 @@ Required properties: * 16 : Alternate Function 15 * 17 : Analog + To simplify the usage, macro is available to generate "pinmux" field. + This macro is available here: + - include/dt-bindings/pinctrl/stm32-pinfunc.h + + Some examples of using macro: + /* GPIO A9 set as alernate function 2 */ + ... { + pinmux = ; + }; + /* GPIO A9 set as GPIO */ + ... { + pinmux = ; + }; + /* GPIO A9 set as analog */ + ... { + pinmux = ; + }; + Optional properties: - GENERIC_PINCONFIG: is the generic pinconfig options to use. Available options are: @@ -165,13 +183,13 @@ pin-controller { ... usart1_pins_a: usart1@0 { pins1 { - pinmux = ; + pinmux = ; bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; bias-disable; }; }; diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt new file mode 100644 index 0000000000000000000000000000000000000000..1cd050b4054ca28295417595c732825a534b091a --- /dev/null +++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt @@ -0,0 +1,61 @@ +Amlogic Meson Power Controller +============================== + +The Amlogic Meson SoCs embeds an internal Power domain controller. + +VPU Power Domain +---------------- + +The Video Processing Unit power domain is controlled by this power controller, +but the domain requires some external resources to meet the correct power +sequences. +The bindings must respect the power domain bindings as described in the file +power_domain.txt + +Device Tree Bindings: +--------------------- + +Required properties: +- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs +- #power-domain-cells: should be 0 +- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node +- resets: phandles to the reset lines needed for this power demain sequence + as described in ../reset/reset.txt +- clocks: from common clock binding: handle to VPU and VAPB clocks +- clock-names: from common clock binding: must contain "vpu", "vapb" + corresponding to entry in the clocks property. + +Parent node should have the following properties : +- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd" +- reg: base address and size of the AO system control register space. + +Example: +------- + +ao_sysctrl: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + reg = <0x0 0x0 0x0 0x100>; + + pwrc_vpu: power-controller-vpu { + compatible = "amlogic,meson-gx-pwrc-vpu"; + #power-domain-cells = <0>; + amlogic,hhi-sysctrl = <&sysctrl>; + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_DVIN_RESET>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + }; +}; + + diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt b/Documentation/devicetree/bindings/power/renesas,apmu.txt index af21502e939c4b1f6866e80f7325342833b133c0..f747f95eee582419178f2b5fb5ca500b2c9bb137 100644 --- a/Documentation/devicetree/bindings/power/renesas,apmu.txt +++ b/Documentation/devicetree/bindings/power/renesas,apmu.txt @@ -8,6 +8,7 @@ Required properties: - compatible: Should be "renesas,-apmu", "renesas,apmu" as fallback. Examples with soctypes are: - "renesas,r8a7743-apmu" (RZ/G1M) + - "renesas,r8a7745-apmu" (RZ/G1E) - "renesas,r8a7790-apmu" (R-Car H2) - "renesas,r8a7791-apmu" (R-Car M2-W) - "renesas,r8a7792-apmu" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt index 98cc8c09d02d5d857992250fd61a0199359e5933..8690f10426a3654333ef0f48f55f90422a0d64f6 100644 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt @@ -17,6 +17,7 @@ Required properties: - "renesas,r8a7794-sysc" (R-Car E2) - "renesas,r8a7795-sysc" (R-Car H3) - "renesas,r8a7796-sysc" (R-Car M3-W) + - "renesas,r8a77970-sysc" (R-Car V3M) - "renesas,r8a77995-sysc" (R-Car D3) - reg: Address start and address range for the device. - #power-domain-cells: Must be 1. diff --git a/Documentation/devicetree/bindings/power/ti-smartreflex.txt b/Documentation/devicetree/bindings/power/ti-smartreflex.txt new file mode 100644 index 0000000000000000000000000000000000000000..9780957c91153abec0f861cb7984aa52e756e4cb --- /dev/null +++ b/Documentation/devicetree/bindings/power/ti-smartreflex.txt @@ -0,0 +1,47 @@ +Texas Instruments SmartReflex binding + +SmartReflex is used to set and adjust the SoC operating points. + + +Required properties: + +compatible: Shall be one of the following: + "ti,omap3-smartreflex-core" + "ti,omap3-smartreflex-iva" + "ti,omap4-smartreflex-core" + "ti,omap4-smartreflex-mpu" + "ti,omap4-smartreflex-iva" + +reg: Shall contain the device instance IO range + +interrupts: Shall contain the device instance interrupt + + +Optional properties: + +ti,hwmods: Shall contain the TI interconnect module name if needed + by the SoC + + +Example: + + smartreflex_iva: smartreflex@4a0db000 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0x4a0db000 0x80>; + interrupts = ; + ti,hwmods = "smartreflex_iva"; + }; + + smartreflex_core: smartreflex@4a0dd000 { + compatible = "ti,omap4-smartreflex-core"; + reg = <0x4a0dd000 0x80>; + interrupts = ; + ti,hwmods = "smartreflex_core"; + }; + + smartreflex_mpu: smartreflex@4a0d9000 { + compatible = "ti,omap4-smartreflex-mpu"; + reg = <0x4a0d9000 0x80>; + interrupts = ; + ti,hwmods = "smartreflex_mpu"; + }; diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt index 7e94b802395d677ec946c874ffaf58969d209a41..74c1180159809e3886caacabef528da0578256a0 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt @@ -9,6 +9,7 @@ Required Properties: - "renesas,pwm-r8a7794": for R-Car E2 - "renesas,pwm-r8a7795": for R-Car H3 - "renesas,pwm-r8a7796": for R-Car M3-W + - "renesas,pwm-r8a77995": for R-Car D3 - reg: base address and length of the registers block for the PWM. - #pwm-cells: should be 2. See pwm.txt in this directory for a description of the cells format. diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 378f6dc8b8bd102b64cbf477aa203c41115d9b00..3cbf56ce66ea9871ad2e41068baaef6171ae7ca3 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -107,7 +107,7 @@ regulators (twl_reg1 and twl_reg2), ... }; - mmc: mmc@0x0 { + mmc: mmc@0 { ... ... vmmc-supply = <&twl_reg1>; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 7ff3f7903f267c9dd8d20983d461c7f344ca7ba6..00d3d58a102fe6da2ed0b70b7ce2d61772b17822 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -10,6 +10,7 @@ on the Qualcomm Hexagon core. "qcom,q6v5-pil", "qcom,msm8916-mss-pil", "qcom,msm8974-mss-pil" + "qcom,msm8996-mss-pil" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt new file mode 100644 index 0000000000000000000000000000000000000000..8562ba1dce69253bd7cfb6a9c8dd115d297d2b76 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt @@ -0,0 +1,51 @@ +Qualcomm Remote File System Memory binding + +This binding describes the Qualcomm remote filesystem memory, which serves the +purpose of describing the shared memory region used for remote processors to +access block device data using the Remote Filesystem protocol. + +- compatible: + Usage: required + Value type: + Definition: must be: + "qcom,rmtfs-mem" + +- reg: + Usage: required for static allocation + Value type: + Definition: must specify base address and size of the memory region, + as described in reserved-memory.txt + +- size: + Usage: required for dynamic allocation + Value type: + Definition: must specify a size of the memory region, as described in + reserved-memory.txt + +- qcom,client-id: + Usage: required + Value type: + Definition: identifier of the client to use this region for buffers. + +- qcom,vmid: + Usage: optional + Value type: + Definition: vmid of the remote processor, to set up memory protection. + += EXAMPLE +The following example shows the remote filesystem memory setup for APQ8016, +with the rmtfs region for the Hexagon DSP (id #1) located at 0x86700000. + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86700000 0x0 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt index e5a03ffe04fb2af74ed41b7aa36aee284edc437a..a8014f3ab8ba19afb5989b369403a2f5b42bcc40 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rst.txt +++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt @@ -26,6 +26,7 @@ Required properties: - "renesas,r8a7794-rst" (R-Car E2) - "renesas,r8a7795-rst" (R-Car H3) - "renesas,r8a7796-rst" (R-Car M3-W) + - "renesas,r8a77970-rst" (R-Car V3M) - "renesas,r8a77995-rst" (R-Car D3) - reg: Address start and address range for the device. diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt new file mode 100644 index 0000000000000000000000000000000000000000..32d8435a41dfbf088344e158cf8c07d10ec9eb09 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt @@ -0,0 +1,33 @@ +Binding for the AXS10x reset controller + +This binding describes the ARC AXS10x boards custom IP-block which allows +to control reset signals of selected peripherals. For example DW GMAC, etc... +This block is controlled via memory-mapped register (AKA CREG) which +represents up-to 32 reset lines. + +As of today only the following lines are used: + - DW GMAC - line 5 + +This binding uses the common reset binding[1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + +Required properties: +- compatible: should be "snps,axs10x-reset". +- reg: should always contain pair address - length: for creg reset + bits register. +- #reset-cells: from common reset binding; Should always be set to 1. + +Example: + reset: reset-controller@11220 { + compatible = "snps,axs10x-reset"; + #reset-cells = <1>; + reg = <0x11220 0x4>; + }; + +Specifying reset lines connected to IP modules: + ethernet@.... { + .... + resets = <&reset 5>; + .... + }; diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index 68a6f487c4092f205eb4cae09ca962195c15c06e..93efed629900c65f9c9b1d74265cb4d2c7936245 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -13,6 +13,7 @@ Required properties: "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC "socionext,uniphier-ld11-reset" - for LD11 SoC "socionext,uniphier-ld20-reset" - for LD20 SoC + "socionext,uniphier-pxs3-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: @@ -44,6 +45,7 @@ Required properties: "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO) "socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD) "socionext,uniphier-ld20-sd-reset" - for LD20 SoC + "socionext,uniphier-pxs3-sd-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: @@ -74,6 +76,7 @@ Required properties: "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC "socionext,uniphier-ld11-peri-reset" - for LD11 SoC "socionext,uniphier-ld20-peri-reset" - for LD20 SoC + "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: diff --git a/Documentation/devicetree/bindings/riscv/cpus.txt b/Documentation/devicetree/bindings/riscv/cpus.txt new file mode 100644 index 0000000000000000000000000000000000000000..adf7b7af5dc35532c488398c28ccb14b4237b0ff --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/cpus.txt @@ -0,0 +1,162 @@ +=================== +RISC-V CPU Bindings +=================== + +The device tree allows to describe the layout of CPUs in a system through +the "cpus" node, which in turn contains a number of subnodes (ie "cpu") +defining properties for every cpu. + +Bindings for CPU nodes follow the Devicetree Specification, available from: + +https://www.devicetree.org/specifications/ + +with updates for 32-bit and 64-bit RISC-V systems provided in this document. + +=========== +Terminology +=========== + +This document uses some terminology common to the RISC-V community that is not +widely used, the definitions of which are listed here: + +* hart: A hardware execution context, which contains all the state mandated by + the RISC-V ISA: a PC and some registers. This terminology is designed to + disambiguate software's view of execution contexts from any particular + microarchitectural implementation strategy. For example, my Intel laptop is + described as having one socket with two cores, each of which has two hyper + threads. Therefore this system has four harts. + +===================================== +cpus and cpu node bindings definition +===================================== + +The RISC-V architecture, in accordance with the Devicetree Specification, +requires the cpus and cpu nodes to be present and contain the properties +described below. + +- cpus node + + Description: Container of cpu nodes + + The node name must be "cpus". + + A cpus node must define the following properties: + + - #address-cells + Usage: required + Value type: + Definition: must be set to 1 + - #size-cells + Usage: required + Value type: + Definition: must be set to 0 + +- cpu node + + Description: Describes a hart context + + PROPERTIES + + - device_type + Usage: required + Value type: + Definition: must be "cpu" + - reg + Usage: required + Value type: + Definition: The hart ID of this CPU node + - compatible: + Usage: required + Value type: + Definition: must contain "riscv", may contain one of + "sifive,rocket0" + - mmu-type: + Usage: optional + Value type: + Definition: Specifies the CPU's MMU type. Possible values are + "riscv,sv32" + "riscv,sv39" + "riscv,sv48" + - riscv,isa: + Usage: required + Value type: + Definition: Contains the RISC-V ISA string of this hart. These + ISA strings are defined by the RISC-V ISA manual. + +Example: SiFive Freedom U540G Development Kit +--------------------------------------------- + +This system contains two harts: a hart marked as disabled that's used for +low-level system tasks and should be ignored by Linux, and a second hart that +Linux is allowed to run on. + + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <1000000>; + cpu@0 { + clock-frequency = <1600000000>; + compatible = "sifive,rocket0", "riscv"; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <16384>; + next-level-cache = <&L15 &L0>; + reg = <0>; + riscv,isa = "rv64imac"; + status = "disabled"; + L10: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + cpu@1 { + clock-frequency = <1600000000>; + compatible = "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + next-level-cache = <&L15 &L0>; + reg = <1>; + riscv,isa = "rv64imafdc"; + status = "okay"; + tlb-split; + L13: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + }; + +Example: Spike ISA Simulator with 1 Hart +---------------------------------------- + +This device tree matches the Spike ISA golden model as run with `spike -p1`. + + cpus { + cpu@0 { + device_type = "cpu"; + reg = <0x00000000>; + status = "okay"; + compatible = "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv48"; + clock-frequency = <0x3b9aca00>; + interrupt-controller { + #interrupt-cells = <0x00000001>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + } + } + } diff --git a/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt b/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt index 323cf26374cb14dff4284fb8cdbe4e27270b8107..c797bc9d77d2296a225c8d6da9922fb187243f9a 100644 --- a/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt @@ -1,20 +1,20 @@ * i.MX25 Real Time Clock controller -This binding supports the following chips: i.MX25, i.MX53 - Required properties: - compatible: should be: "fsl,imx25-rtc" - reg: physical base address of the controller and length of memory mapped region. +- clocks: should contain the phandle for the rtc clock - interrupts: rtc alarm interrupt Optional properties: -- interrupts: dryice security violation interrupt +- interrupts: dryice security violation interrupt (second entry) Example: -rtc@80056000 { - compatible = "fsl,imx53-rtc", "fsl,imx25-rtc"; - reg = <0x80056000 2000>; - interrupts = <29 56>; +rtc@53ffc000 { + compatible = "fsl,imx25-rtc"; + reg = <0x53ffc000 0x4000>; + clocks = <&clks 81>; + interrupts = <25 56>; }; diff --git a/Documentation/devicetree/bindings/rtc/pcf85363.txt b/Documentation/devicetree/bindings/rtc/pcf85363.txt new file mode 100644 index 0000000000000000000000000000000000000000..76fdabc5974232a08cbcbe10b60cd08db942b7cf --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/pcf85363.txt @@ -0,0 +1,17 @@ +NXP PCF85363 Real Time Clock +============================ + +Required properties: +- compatible: Should contain "nxp,pcf85363". +- reg: I2C address for chip. + +Optional properties: +- interrupts: IRQ line for the RTC (not implemented). + +Example: + +pcf85363: pcf85363@51 { + compatible = "nxp,pcf85363"; + reg = <0x51>; +}; + diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt b/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt new file mode 100644 index 0000000000000000000000000000000000000000..09fe8f51476f8638216279ceb68b0d3a736dc920 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt @@ -0,0 +1,21 @@ +Device-Tree bindings for MediaTek SoC based RTC + +Required properties: +- compatible : Should be + "mediatek,mt7622-rtc", "mediatek,soc-rtc" : for MT7622 SoC +- reg : Specifies base physical address and size of the registers; +- interrupts : Should contain the interrupt for RTC alarm; +- clocks : Specifies list of clock specifiers, corresponding to + entries in clock-names property; +- clock-names : Should contain "rtc" entries + +Example: + +rtc: rtc@10212800 { + compatible = "mediatek,mt7622-rtc", + "mediatek,soc-rtc"; + reg = <0 0x10212800 0 0x200>; + interrupts = ; + clocks = <&topckgen CLK_TOP_RTC>; + clock-names = "rtc"; +}; diff --git a/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt new file mode 100644 index 0000000000000000000000000000000000000000..7c170da0d4b76e45055600f4765f6ea016995452 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt @@ -0,0 +1,27 @@ +Spreadtrum SC27xx Real Time Clock + +Required properties: +- compatible: should be "sprd,sc2731-rtc". +- reg: address offset of rtc register. +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. + +Example: + + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@280 { + compatible = "sprd,sc2731-rtc"; + reg = <0x280>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt index 5c52e5eef16db630d2c64ade872e26b89b7a540d..8b2b0460259a76b95401cfe7565e1a13621ac470 100644 --- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt +++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt @@ -11,6 +11,11 @@ Required properties: - clocks: Clock driving the hardware; used to figure out the baud rate divisor. + +Optional properties: + +- clock-names: Should be "refclk". + Example: uart0: serial@14e00520 { @@ -19,6 +24,7 @@ Example: interrupt-parent = <&periph_intc>; interrupts = <2>; clocks = <&periph_clk>; + clock-names = "refclk"; }; clocks { diff --git a/Documentation/devicetree/bindings/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt index 8adbab268ca3997f50c134081d2f84409d8d10e3..4f8d8fde0c1c2a0728ac3c331d694e7a1bdbd423 100644 --- a/Documentation/devicetree/bindings/serial/efm32-uart.txt +++ b/Documentation/devicetree/bindings/serial/efm32-uart.txt @@ -12,7 +12,7 @@ Optional properties: Example: -uart@0x4000c400 { +uart@4000c400 { compatible = "energymicro,efm32-uart"; reg = <0x4000c400 0x400>; interrupts = <15>; diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt index 6087defd9f9321b60890212b38f45f45b6ae517e..d37fabe17bd1215df697757e6622aac5f798061e 100644 --- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt +++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt @@ -8,6 +8,6 @@ Required properties: Example: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x400>; + reg = <0x12000 0x200>; interrupts = <43>; }; diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt index f311472990a7e5f081dad3cdba160e2d5edc7abc..75996b6111bb7d95f5f6effb28d27679fc1a5400 100644 --- a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt +++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt @@ -14,7 +14,7 @@ Required properties: Example: - ps20: ps2@0x01c2a000 { + ps20: ps2@01c2a000 { compatible = "allwinner,sun4i-a10-ps2"; reg = <0x01c2a000 0x400>; interrupts = <0 62 4>; diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt index 47ac834414d8488e29c20bf3b91f369b994b8746..48eed140765b0b902b19ed485c23b3e16838f905 100644 --- a/Documentation/devicetree/bindings/soc/fsl/bman.txt +++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt @@ -65,8 +65,8 @@ to the respective BMan instance BMan Private Memory Node BMan requires a contiguous range of physical memory used for the backing store -for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as a -node under the /reserved-memory node +for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as +a node under the /reserved-memory node. The BMan FBPR memory node must be named "bman-fbpr" @@ -75,7 +75,9 @@ PROPERTIES - compatible Usage: required Value type: - Definition: Must inclide "fsl,bman-fbpr" + Definition: PPC platforms: Must include "fsl,bman-fbpr" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The following constraints are relevant to the FBPR private memory: - The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to @@ -100,10 +102,10 @@ The example below shows a BMan FBPR dynamic allocation memory node ranges; bman_fbpr: bman-fbpr { - compatible = "fsl,bman-fbpr"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-mem-pool"; size = <0 0x1000000>; alignment = <0 0x1000000>; + no-map; }; }; diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt index 556ebb8be75d9cfa5b16aca5ac56316ee1f00d29..ee96afd2af72163c1e28cc7ff135cc110beadb18 100644 --- a/Documentation/devicetree/bindings/soc/fsl/qman.txt +++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt @@ -60,6 +60,12 @@ are located at offsets 0xbf8 and 0xbfc Value type: Definition: Reference input clock. Its frequency is half of the platform clock +- memory-regions + Usage: Required for ARM + Value type: + Definition: List of phandles referencing the QMan private memory + nodes (described below). The qman-fqd node must be + first followed by qman-pfdr node. Only used on ARM Devices connected to a QMan instance via Direct Connect Portals (DCP) must link to the respective QMan instance @@ -74,7 +80,9 @@ QMan Private Memory Nodes QMan requires two contiguous range of physical memory used for the backing store for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR). -This memory is reserved/allocated as a nodes under the /reserved-memory node +This memory is reserved/allocated as a node under the /reserved-memory node. + +For additional details about reserved memory regions see reserved-memory.txt The QMan FQD memory node must be named "qman-fqd" @@ -83,7 +91,9 @@ PROPERTIES - compatible Usage: required Value type: - Definition: Must inclide "fsl,qman-fqd" + Definition: PPC platforms: Must include "fsl,qman-fqd" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The QMan PFDR memory node must be named "qman-pfdr" @@ -92,7 +102,9 @@ PROPERTIES - compatible Usage: required Value type: - Definition: Must inclide "fsl,qman-pfdr" + Definition: PPC platforms: Must include "fsl,qman-pfdr" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The following constraints are relevant to the FQD and PFDR private memory: - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to @@ -117,16 +129,16 @@ The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes ranges; qman_fqd: qman-fqd { - compatible = "fsl,qman-fqd"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-dma-pool"; size = <0 0x400000>; alignment = <0 0x400000>; + no-map; }; qman_pfdr: qman-pfdr { - compatible = "fsl,qman-pfdr"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-dma-pool"; size = <0 0x2000000>; alignment = <0 0x2000000>; + no-map; }; }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt index 107700d00df4d2ac7331b6c9fc59baafa2805670..bf80e3f96f8c6b12b011357fd2e2dba49d34d8c3 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt @@ -19,6 +19,7 @@ IP Pairing Required properties in pwrap device node. - compatible: "mediatek,mt2701-pwrap" for MT2701/7623 SoCs + "mediatek,mt7622-pwrap" for MT7622 SoCs "mediatek,mt8135-pwrap" for MT8135 SoCs "mediatek,mt8173-pwrap" for MT8173 SoCs - interrupts: IRQ for pwrap in SOC @@ -36,9 +37,12 @@ Required properties in pwrap device node. - clocks: Must contain an entry for each entry in clock-names. Optional properities: -- pmic: Mediatek PMIC MFD is the child device of pwrap +- pmic: Using either MediaTek PMIC MFD as the child device of pwrap See the following for child node definitions: Documentation/devicetree/bindings/mfd/mt6397.txt + or the regulator-only device as the child device of pwrap, such as MT6380. + See the following definitions for such kinds of devices. + Documentation/devicetree/bindings/regulator/mt6380-regulator.txt Example: pwrap: pwrap@1000f000 { diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt index b277eca861f72a45c7fa0bbd2d6d35656d730d39..9663cab5224626cd74a6ca0a724c1be09e0bd38c 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt @@ -39,6 +39,14 @@ of these nodes are defined by the individual bindings for the specific function Definition: a list of channels tied to this function, used for matching the function to a set of virtual channels +- qcom,intents: + Usage: optional + Value type: + Definition: a list of size,amount pairs describing what intents should + be preallocated for this virtual channel. This can be used + to tweak the default intents available for the channel to + meet expectations of the remote. + = EXAMPLE The following example represents the GLINK RPM node on a MSM8996 device, with the function for the "rpm_request" channel defined, which is used for @@ -69,6 +77,8 @@ regualtors and root clocks. compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; + qcom,intents = <0x400 5 + 0x800 1>; ... }; }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt index 4ea39e9186a75acd972101553c9cb699f43b68ba..042a2e4159bd64db798a2efaa878ee3e7fd6efa5 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt @@ -37,6 +37,11 @@ The following properties are defined to the bluetooth node: Definition: must be: "qcom,wcnss-bt" +- local-bd-address: + Usage: optional + Value type: + Definition: see Documentation/devicetree/bindings/net/bluetooth.txt + == WiFi The following properties are defined to the WiFi node: @@ -91,6 +96,9 @@ smd { bt { compatible = "qcom,wcnss-bt"; + + /* BD address 00:11:22:33:44:55 */ + local-bd-address = [ 55 44 33 22 11 00 ]; }; wlan { diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt index 64c66a5644e7551c2637b4aebff3d81f12cdf48f..77cd42cc5f54897b60371af222d62f847e97326f 100644 --- a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt +++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt @@ -220,7 +220,7 @@ qmss: qmss@2a40000 { #address-cells = <1>; #size-cells = <1>; ranges; - pdsp0@0x2a10000 { + pdsp0@2a10000 { reg = <0x2a10000 0x1000>, <0x2a0f000 0x100>, <0x2a0c000 0x3c8>, diff --git a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt index 5875ca459ed11355feccc4c106e04e5df2a71ce3..4248b662deff04e4fbbbc3effa487e09fa140bee 100644 --- a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt +++ b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt @@ -21,7 +21,7 @@ please check: Example: - i2s: i2s@0x77600000 { + i2s: i2s@77600000 { compatible = "adi,axi-i2s-1.00.a"; reg = <0x77600000 0x1000>; clocks = <&clk 15>, <&audio_clock>; diff --git a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt index 4eb7997674a09006dfa0a991b634082ddc64974d..7b664e7cb4ae99dfae7f1beb52bba140f6ee1dd7 100644 --- a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt +++ b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt @@ -20,7 +20,7 @@ please check: Example: - spdif: spdif@0x77400000 { + spdif: spdif@77400000 { compatible = "adi,axi-spdif-tx-1.00.a"; reg = <0x77600000 0x1000>; clocks = <&clk 15>, <&audio_clock>; diff --git a/Documentation/devicetree/bindings/sound/ak4613.txt b/Documentation/devicetree/bindings/sound/ak4613.txt index 1783f9ef093096a0f06c1daf8ba854bba91e397d..49a2e74fd9cb1489b145b1132f2f892209c8b448 100644 --- a/Documentation/devicetree/bindings/sound/ak4613.txt +++ b/Documentation/devicetree/bindings/sound/ak4613.txt @@ -20,7 +20,7 @@ Optional properties: Example: &i2c { - ak4613: ak4613@0x10 { + ak4613: ak4613@10 { compatible = "asahi-kasei,ak4613"; reg = <0x10>; }; diff --git a/Documentation/devicetree/bindings/sound/ak4642.txt b/Documentation/devicetree/bindings/sound/ak4642.txt index 340784db6808809eecf4ae0e310023550713e2c6..58e48ee9717547f2766a2c0a89fec19536431634 100644 --- a/Documentation/devicetree/bindings/sound/ak4642.txt +++ b/Documentation/devicetree/bindings/sound/ak4642.txt @@ -17,7 +17,7 @@ Optional properties: Example 1: &i2c { - ak4648: ak4648@0x12 { + ak4648: ak4648@12 { compatible = "asahi-kasei,ak4642"; reg = <0x12>; }; diff --git a/Documentation/devicetree/bindings/sound/da7218.txt b/Documentation/devicetree/bindings/sound/da7218.txt index 5ca5a709b6aa1989901eff6b9239f0bc71d0d272..3ab9dfef38d113523549e66cee20ad8db6e56842 100644 --- a/Documentation/devicetree/bindings/sound/da7218.txt +++ b/Documentation/devicetree/bindings/sound/da7218.txt @@ -73,7 +73,7 @@ Example: compatible = "dlg,da7218"; reg = <0x1a>; interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; wakeup-source; VDD-supply = <®_audio>; diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt index cf61681826b675ad984dc17f6c1dbcc2e1b6fc35..5b54d2d045c355808bf0f58afba9ec7539ff4472 100644 --- a/Documentation/devicetree/bindings/sound/da7219.txt +++ b/Documentation/devicetree/bindings/sound/da7219.txt @@ -77,7 +77,7 @@ Example: reg = <0x1a>; interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; VDD-supply = <®_audio>; VDDMIC-supply = <®_audio>; diff --git a/Documentation/devicetree/bindings/sound/max98371.txt b/Documentation/devicetree/bindings/sound/max98371.txt index 6c285235e64be59e0cf55bfee5b54920a58dea36..8b2b2704b574e248c426565514076e2a42aa0631 100644 --- a/Documentation/devicetree/bindings/sound/max98371.txt +++ b/Documentation/devicetree/bindings/sound/max98371.txt @@ -10,7 +10,7 @@ Required properties: Example: &i2c { - max98371: max98371@0x31 { + max98371: max98371@31 { compatible = "maxim,max98371"; reg = <0x31>; }; diff --git a/Documentation/devicetree/bindings/sound/max9867.txt b/Documentation/devicetree/bindings/sound/max9867.txt index 394cd4eb17ec47531edabc161f93506925775805..b8bd914ee697b1435f0ebb47e4d3062961c61859 100644 --- a/Documentation/devicetree/bindings/sound/max9867.txt +++ b/Documentation/devicetree/bindings/sound/max9867.txt @@ -10,7 +10,7 @@ Required properties: Example: &i2c { - max9867: max9867@0x18 { + max9867: max9867@18 { compatible = "maxim,max9867"; reg = <0x18>; }; diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.txt b/Documentation/devicetree/bindings/sound/renesas,fsi.txt index 0d0ab51105b01ece9c0dfbe6571e6d2086550f42..0cf0f819b8236e250fd0f0db1bc0dba879e9dcd4 100644 --- a/Documentation/devicetree/bindings/sound/renesas,fsi.txt +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.txt @@ -20,7 +20,7 @@ Required properties: Example: -sh_fsi2: sh_fsi2@0xec230000 { +sh_fsi2: sh_fsi2@ec230000 { compatible = "renesas,sh_fsi2"; reg = <0xec230000 0x400>; interrupts = <0 146 0x4>; diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt index 0a1dc4e1815cb524faee4c228a14ddeeea626578..ec20c1271e929c17e8c24e736989cdbbd4ec9ce9 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt @@ -33,7 +33,7 @@ Required properties on RK3288: Example for the rk3188 SPDIF controller: -spdif: spdif@0x1011e000 { +spdif: spdif@1011e000 { compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; reg = <0x1011e000 0x2000>; interrupts = ; diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt index 40068ec0e9a561db3128fe37d581b1a4499b5ddf..9c1ee52fed5bff6300b5863b0c3fc07aeceb5dc8 100644 --- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt @@ -51,7 +51,7 @@ Optional properties: Example: - sti_uni_player1: sti-uni-player@0x8D81000 { + sti_uni_player1: sti-uni-player@8D81000 { compatible = "st,stih407-uni-player-hdmi"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; @@ -63,7 +63,7 @@ Example: st,tdm-mode = <1>; }; - sti_uni_player2: sti-uni-player@0x8D82000 { + sti_uni_player2: sti-uni-player@8D82000 { compatible = "st,stih407-uni-player-pcm-out"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; @@ -74,7 +74,7 @@ Example: dma-names = "tx"; }; - sti_uni_player3: sti-uni-player@0x8D85000 { + sti_uni_player3: sti-uni-player@8D85000 { compatible = "st,stih407-uni-player-spdif"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; @@ -85,7 +85,7 @@ Example: dma-names = "tx"; }; - sti_uni_reader1: sti-uni-reader@0x8D84000 { + sti_uni_reader1: sti-uni-reader@8D84000 { compatible = "st,stih407-uni-reader-hdmi"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt index 2c1e6a43930baa88426aa4822f6ec79ee8bbc10e..e0fa61a1be0c864258574787d8fa496db2118916 100644 --- a/Documentation/devicetree/bindings/spi/efm32-spi.txt +++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt @@ -19,7 +19,7 @@ Recommended properties : Example: -spi1: spi@0x4000c400 { /* USART1 */ +spi1: spi@4000c400 { /* USART1 */ #address-cells = <1>; #size-cells = <0>; compatible = "energymicro,efm32-spi"; diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index 5bf13960f7f4a3c826c10b1e15a618df82d82403..e3c48b20b1a691b37d0b425251a257c682a38eca 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -12,24 +12,30 @@ Required properties: - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc - reg : Offset and length of the register set for the device - interrupts : Should contain CSPI/eCSPI interrupt -- cs-gpios : Specifies the gpio pins to be used for chipselects. - clocks : Clock specifiers for both ipg and per clocks. - clock-names : Clock names should include both "ipg" and "per" See the clock consumer binding, Documentation/devicetree/bindings/clock/clock-bindings.txt -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request names should include "tx" and "rx" if present. -Obsolete properties: -- fsl,spi-num-chipselects : Contains the number of the chipselect +Recommended properties: +- cs-gpios : GPIOs to use as chip selects, see spi-bus.txt. While the native chip +select lines can be used, they appear to always generate a pulse between each +word of a transfer. Most use cases will require GPIO based chip selects to +generate a valid transaction. Optional properties: +- num-cs : Number of total chip selects, see spi-bus.txt. +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, +Documentation/devicetree/bindings/dma/dma.txt. +- dma-names: DMA request names, if present, should include "tx" and "rx". - fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register controlling the SPI_READY handling. Note that to enable the DRCTL consideration, the SPI_READY mode-flag needs to be set too. Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst). +Obsolete properties: +- fsl,spi-num-chipselects : Contains the number of the chipselect + Example: ecspi@70010000 { diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index 13b1fcc8469e699412282d92c59c59328916dff8..dcc7eaada5118a5e61c23499d5f46f5f324e5c43 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -5,6 +5,7 @@ Required properties: "fsl,ls2085a-dspi" or "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi" + "fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi" - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt new file mode 100644 index 0000000000000000000000000000000000000000..9d43553a8d397b63cb39152133df9b51d1b74471 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt @@ -0,0 +1,20 @@ +* Broadcom STB thermal management + +Thermal management core, provided by the AVS TMON hardware block. + +Required properties: +- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445" +- reg: address range for the AVS TMON registers +- interrupts: temperature monitor interrupt, for high/low threshold triggers +- interrupt-names: should be "tmon" +- interrupt-parent: the parent interrupt controller + +Example: + + thermal@f04d1500 { + compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon"; + reg = <0xf04d1500 0x28>; + interrupts = <0x6>; + interrupt-names = "tmon"; + interrupt-parent = <&avs_host_l2_intc>; + }; diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt index d48fc5280d5a80ba17f9d906f01554d390edf9be..cef716a236f1a94179d5c61bde45c79df0890e8f 100644 --- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt @@ -13,6 +13,7 @@ Example : +for Hi6220: tsensor: tsensor@0,f7030700 { compatible = "hisilicon,tsensor"; reg = <0x0 0xf7030700 0x0 0x1000>; @@ -21,3 +22,11 @@ Example : clock-names = "thermal_clk"; #thermal-sensor-cells = <1>; } + +for Hi3660: + tsensor: tsensor@fff30000 { + compatible = "hisilicon,hi3660-tsensor"; + reg = <0x0 0xfff30000 0x0 0x1000>; + interrupts = ; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt index 3c67bd50aa104ee152ea22132c377dcd2e6d3673..28be51afdb6a2623a9eb9465a86e0ec3fa7a1d7a 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt @@ -7,10 +7,17 @@ Required properties: is higher than panic threshold, system will auto reboot by SRC module. - fsl,tempmon : phandle pointer to system controller that contains TEMPMON control registers, e.g. ANATOP on imx6q. +- nvmem-cells: A phandle to the calibration cells provided by ocotp. +- nvmem-cell-names: Should be "calib", "temp_grade". + +Deprecated properties: - fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON calibration data, e.g. OCOTP on imx6q. The details about calibration data can be found in SoC Reference Manual. +Direct access to OCOTP via fsl,tempmon-data is incorrect on some newer chips +because it does not handle OCOTP clock requirements. + Optional properties: - clocks : thermal sensor's clock source. diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt new file mode 100644 index 0000000000000000000000000000000000000000..276387dd6815e334ae7d6a9e7d05f1509efd8f5f --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt @@ -0,0 +1,32 @@ +NVIDIA Tegra186 BPMP thermal sensor + +In Tegra186, the BPMP (Boot and Power Management Processor) implements an +interface that is used to read system temperatures, including CPU cluster +and GPU temperatures. This binding describes the thermal sensor that is +exposed by BPMP. + +The BPMP thermal node must be located directly inside the main BPMP node. See +../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding. + +This node represents a thermal sensor. See thermal.txt for details of the +core thermal binding. + +Required properties: +- compatible: + Array of strings. + One of: + - "nvidia,tegra186-bpmp-thermal". +- #thermal-sensor-cells: Cell for sensor index. + Single-cell integer. + Must be <1>. + +Example: + +bpmp { + ... + + bpmp_thermal: thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt index e3a6234fb1acdbf3efdbf61c233c5151a98adc4f..43d744e5305ef3fd4f1577ec69fd8db41dc2be56 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -2,6 +2,7 @@ Required properties: - compatible : should be "rockchip,-tsadc" + "rockchip,rv1108-tsadc": found on RV1108 SoCs "rockchip,rk3228-tsadc": found on RK3228 SoCs "rockchip,rk3288-tsadc": found on RK3288 SoCs "rockchip,rk3328-tsadc": found on RK3328 SoCs diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt index 88b6ea1ad2903cadd73650ff6dbfa0eb54aac39f..44d7cb2cb2c023ec8f1bbcaa90c26f7d406f9abf 100644 --- a/Documentation/devicetree/bindings/thermal/thermal.txt +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -239,7 +239,7 @@ cpus { * A simple fan controller which supports 10 speeds of operation * (represented as 0-9). */ - fan0: fan@0x48 { + fan0: fan@48 { ... cooling-min-level = <0>; cooling-max-level = <9>; @@ -252,7 +252,7 @@ ocp { /* * A simple IC with a single bandgap temperature sensor. */ - bandgap0: bandgap@0x0000ED00 { + bandgap0: bandgap@0000ED00 { ... #thermal-sensor-cells = <0>; }; @@ -330,7 +330,7 @@ ocp { /* * A simple IC with several bandgap temperature sensors. */ - bandgap0: bandgap@0x0000ED00 { + bandgap0: bandgap@0000ED00 { ... #thermal-sensor-cells = <1>; }; @@ -447,7 +447,7 @@ one thermal zone. /* * A simple IC with a single temperature sensor. */ - adc: sensor@0x49 { + adc: sensor@49 { ... #thermal-sensor-cells = <0>; }; @@ -458,7 +458,7 @@ ocp { /* * A simple IC with a single bandgap temperature sensor. */ - bandgap0: bandgap@0x0000ED00 { + bandgap0: bandgap@0000ED00 { ... #thermal-sensor-cells = <0>; }; @@ -516,7 +516,7 @@ with many sensors and many cooling devices. /* * An IC with several temperature sensor. */ - adc_dummy: sensor@0x50 { + adc_dummy: sensor@50 { ... #thermal-sensor-cells = <1>; /* sensor internal ID */ }; diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt index 27dce08edd733b0a4c85cb2ac71baa90edb043b5..5f3143f970983ca92ce1024eaed87f03fa494877 100644 --- a/Documentation/devicetree/bindings/trivial-devices.txt +++ b/Documentation/devicetree/bindings/trivial-devices.txt @@ -55,7 +55,6 @@ epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE emmicro,em3027 EM Microelectronic EM3027 Real-time Clock fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer -fsl,mc13892 MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51 fsl,mma7660 MMA7660FC: 3-Axis Orientation/Motion Detection Sensor fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer fsl,mpl3115 MPL3115: Absolute Digital Pressure Sensor @@ -73,7 +72,6 @@ maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs maxim,max6621 PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface -mc,rv3029c2 Real Time Clock Module with I2C-Bus mcube,mc3230 mCube 3-axis 8-bit digital accelerometer memsic,mxc6225 MEMSIC 2-axis 8-bit digital accelerometer microchip,mcp4531-502 Microchip 7-bit Single I2C Digital Potentiometer (5k) @@ -142,6 +140,7 @@ microchip,mcp4662-503 Microchip 8-bit Dual I2C Digital Potentiometer with NV Mem microchip,mcp4662-104 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) microchip,tc654 PWM Fan Speed Controller With Fan Fault Detection microchip,tc655 PWM Fan Speed Controller With Fan Fault Detection +microcrystal,rv3029 Real Time Clock Module with I2C-Bus miramems,da226 MiraMEMS DA226 2-axis 14-bit digital accelerometer miramems,da280 MiraMEMS DA280 3-axis 14-bit digital accelerometer miramems,da311 MiraMEMS DA311 3-axis 12-bit digital accelerometer diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt index 1f69ee1a61ea25b776671be1becb8e8f63a29eb1..21d9a93db2e970cde487151f667c93063a8ae5f9 100644 --- a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt +++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt @@ -32,7 +32,7 @@ Optional properties: Example: - ufsphy1: ufsphy@0xfc597000 { + ufsphy1: ufsphy@fc597000 { compatible = "qcom,ufs-phy-qmp-20nm"; reg = <0xfc597000 0x800>; reg-names = "phy_mem"; @@ -53,7 +53,7 @@ Example: <&clock_gcc clk_gcc_ufs_rx_cfg_clk>; }; - ufshc@0xfc598000 { + ufshc@fc598000 { ... phys = <&ufsphy1>; phy-names = "ufsphy"; diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt index a99ed5565b26c406ef6e643c99d6c1eb08fedeac..c39dfef76a183ad80eb27b36a820b3ee6c8107b6 100644 --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt @@ -46,7 +46,7 @@ Note: If above properties are not defined it can be assumed that the supply regulators or clocks are always on. Example: - ufshc@0xfc598000 { + ufshc@fc598000 { compatible = "jedec,ufs-1.1"; reg = <0xfc598000 0x800>; interrupts = <0 28 0>; diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index 7a33f22c815a76ca534bf16f5d158e6d9ae07033..7a198a30408abf3f8a164189d60248f1dfcddc8b 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -95,6 +95,7 @@ usb: usb@47400000 { reg = <0x47401300 0x100>; reg-names = "phy"; ti,ctrl_mod = <&ctrl_mod>; + #phy-cells = <0>; }; usb0: usb@47401000 { @@ -141,6 +142,7 @@ usb: usb@47400000 { reg = <0x47401b00 0x100>; reg-names = "phy"; ti,ctrl_mod = <&ctrl_mod>; + #phy-cells = <0>; }; usb1: usb@47401800 { diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt index 9feea6c3e4d998cba087de49f608cba8ce445242..065c91d955ad159a1ff4cbd75d26ff86f0e52c0e 100644 --- a/Documentation/devicetree/bindings/usb/ehci-st.txt +++ b/Documentation/devicetree/bindings/usb/ehci-st.txt @@ -22,7 +22,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt Example: - ehci1: usb@0xfe203e00 { + ehci1: usb@fe203e00 { compatible = "st,st-ehci-300x"; reg = <0xfe203e00 0x100>; interrupts = ; diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt index d893ec9131c3bdec4cd71e632b932ffd56dfbc9f..44c998c16f85bfbfa4814fffb8dc3d344c14a3de 100644 --- a/Documentation/devicetree/bindings/usb/ohci-st.txt +++ b/Documentation/devicetree/bindings/usb/ohci-st.txt @@ -20,7 +20,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt Example: - ohci0: usb@0xfe1ffc00 { + ohci0: usb@fe1ffc00 { compatible = "st,st-ohci-300x"; reg = <0xfe1ffc00 0x100>; interrupts = ; diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index ce02cebac26afdc80d99600725b3aaec24cb01e9..1b27cebb47f4286f8fac429f1361e6cba240d469 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -4,24 +4,35 @@ Usually, we only use device tree for hard wired USB device. The reference binding doc is from: http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps + Required properties: -- compatible: usbVID,PID. The textual representation of VID, PID shall - be in lower case hexadecimal with leading zeroes suppressed. The - other compatible strings from the above standard binding could also - be used, but a device adhering to this binding may leave out all except - for usbVID,PID. -- reg: the port number which this device is connecting to, the range - is 1-31. +- compatible: "usbVID,PID", where VID is the vendor id and PID the product id. + The textual representation of VID and PID shall be in lower case hexadecimal + with leading zeroes suppressed. The other compatible strings from the above + standard binding could also be used, but a device adhering to this binding + may leave out all except for "usbVID,PID". +- reg: the number of the USB hub port or the USB host-controller port to which + this device is attached. The range is 1-255. + + +Required properties for hub nodes with device nodes: +- #address-cells: shall be 1 +- #size-cells: shall be 0 -Example: -&usb1 { +Required properties for host-controller nodes with device nodes: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + + +Example: +&usb1 { /* host controller */ #address-cells = <1>; #size-cells = <0>; - hub: genesys@1 { + hub@1 { /* hub connected to port 1 */ compatible = "usb5e3,608"; reg = <1>; }; -} +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 0f295a4798ad3de79de775573fb7cd5770de1e2e..0994bdd82cd37ce0abf9882745fd174764524ac5 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -18,6 +18,7 @@ al Annapurna Labs allwinner Allwinner Technology Co., Ltd. alphascale AlphaScale Integrated Circuits Systems, Inc. altr Altera Corp. +amarula Amarula Solutions amazon Amazon.com, Inc. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amd Advanced Micro Devices (AMD), Inc. @@ -114,6 +115,7 @@ everspin Everspin Technologies, Inc. exar Exar Corporation excito Excito ezchip EZchip Semiconductor +fairphone Fairphone B.V. faraday Faraday Technology Corporation fcs Fairchild Semiconductor firefly Firefly @@ -199,6 +201,7 @@ mcube mCube meas Measurement Specialties mediatek MediaTek Inc. megachips MegaChips +mele Shenzhen MeLE Digital Technology Ltd. melexis Melexis N.V. melfas MELFAS Inc. mellanox Mellanox Technologies @@ -254,6 +257,7 @@ opencores OpenCores.org openrisc OpenRISC.io option Option NV ORCL Oracle Corporation +orisetech Orise Technology ortustech Ortus Technology Co., Ltd. ovti OmniVision Technologies oxsemi Oxford Semiconductor, Ltd. @@ -269,6 +273,7 @@ plathome Plat'Home Co., Ltd. plda PLDA poslab Poslab Technology Co., Ltd. powervr PowerVR (deprecated, use img) +probox2 PROBOX2 (by W2COMP Co., Ltd.) pulsedlight PulsedLight, Inc qca Qualcomm Atheros, Inc. qcom Qualcomm Technologies, Inc @@ -337,6 +342,7 @@ swir Sierra Wireless syna Synaptics Inc. synology Synology, Inc. tbs TBS Technologies +tbs-biometrics Touchless Biometric Systems AG tcg Trusted Computing Group tcl Toby Churchill Ltd. technexion TechNexion @@ -360,6 +366,7 @@ truly Truly Semiconductors Limited tsd Theobroma Systems Design und Consulting GmbH tyan Tyan Computer Corporation ucrobotics uCRobotics +ubnt Ubiquiti Networks udoo Udoo uniwest United Western Technologies Corp (UniWest) upisemi uPI Semiconductor Corp. diff --git a/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt b/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt index e27763ef00497d8645463d084a04e3f07d0c939f..3c7a1cd13b1011f37753f67905561843ce984370 100644 --- a/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt @@ -6,7 +6,7 @@ reg: Register address and length for watchdog registers Example: -watchdog: jz4740-watchdog@0x10002000 { +watchdog: jz4740-watchdog@10002000 { compatible = "ingenic,jz4740-watchdog"; reg = <0x10002000 0x100>; }; diff --git a/Documentation/driver-api/80211/cfg80211.rst b/Documentation/driver-api/80211/cfg80211.rst index 8ffac57e1f5b7ddd0b56547258f604d06816e9bd..eeab91b59457e74f16681eb196356213b9e06173 100644 --- a/Documentation/driver-api/80211/cfg80211.rst +++ b/Documentation/driver-api/80211/cfg80211.rst @@ -299,9 +299,6 @@ Data path helpers .. kernel-doc:: include/net/cfg80211.h :functions: ieee80211_data_to_8023 -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_data_from_8023 - .. kernel-doc:: include/net/cfg80211.h :functions: ieee80211_amsdu_to_8023s diff --git a/Documentation/driver-api/dmaengine/client.rst b/Documentation/driver-api/dmaengine/client.rst index 6245c99af8c1157176fd1d22681bc221917d3d7f..fbbb2831f29f8c7f50675238289478c98f472606 100644 --- a/Documentation/driver-api/dmaengine/client.rst +++ b/Documentation/driver-api/dmaengine/client.rst @@ -185,7 +185,7 @@ The details of these operations are: void dma_async_issue_pending(struct dma_chan *chan); Further APIs: ------------- +------------- 1. Terminate APIs diff --git a/Documentation/driver-api/pci.rst b/Documentation/driver-api/pci.rst index 01a6c8b7d3a7b59dcee9a11d828968e464af9c1c..ca85e5e78b2c439b3279fbe797b67eeaea84b141 100644 --- a/Documentation/driver-api/pci.rst +++ b/Documentation/driver-api/pci.rst @@ -25,9 +25,6 @@ PCI Support Library .. kernel-doc:: drivers/pci/irq.c :export: -.. kernel-doc:: drivers/pci/htirq.c - :export: - .. kernel-doc:: drivers/pci/probe.c :export: diff --git a/Documentation/driver-api/pinctl.rst b/Documentation/driver-api/pinctl.rst index 48f15b4f9d3e441da3dbd582e8dbd36fa2687bce..6cb68d67fa75a7cef5eab57125fccac3a86a0139 100644 --- a/Documentation/driver-api/pinctl.rst +++ b/Documentation/driver-api/pinctl.rst @@ -757,8 +757,8 @@ that your datasheet calls "GPIO mode", but actually is just an electrical configuration for a certain device. See the section below named "GPIO mode pitfalls" for more details on this scenario. -The public pinmux API contains two functions named pinctrl_request_gpio() -and pinctrl_free_gpio(). These two functions shall *ONLY* be called from +The public pinmux API contains two functions named pinctrl_gpio_request() +and pinctrl_gpio_free(). These two functions shall *ONLY* be called from gpiolib-based drivers as part of their gpio_request() and gpio_free() semantics. Likewise the pinctrl_gpio_direction_[input|output] shall only be called from within respective gpio_direction_[input|output] @@ -790,7 +790,7 @@ gpiolib driver and the affected GPIO range, pin offset and desired direction will be passed along to this function. Alternatively to using these special functions, it is fully allowed to use -named functions for each GPIO pin, the pinctrl_request_gpio() will attempt to +named functions for each GPIO pin, the pinctrl_gpio_request() will attempt to obtain the function "gpioN" where "N" is the global GPIO pin number if no special GPIO-handler is registered. diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 69f08c0f23a8eb8706a35f43d338061cdaa61868..c180045eb43b190beccc1072a7285f6f5de5bf34 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -237,6 +237,7 @@ CLOCK devm_clk_get() devm_clk_put() devm_clk_hw_register() + devm_of_clk_add_hw_provider() DMA dmam_alloc_coherent() diff --git a/Documentation/filesystems/afs.txt b/Documentation/filesystems/afs.txt index 060da408923b26bea0017d86ada9369ae8cd91f4..ba99b5ac4fd80284adfbc2f6404a7d3da3fbb665 100644 --- a/Documentation/filesystems/afs.txt +++ b/Documentation/filesystems/afs.txt @@ -91,8 +91,8 @@ Filesystems can be mounted anywhere by commands similar to the following: mount -t afs "#root.cell." /afs/cambridge Where the initial character is either a hash or a percent symbol depending on -whether you definitely want a R/W volume (hash) or whether you'd prefer a R/O -volume, but are willing to use a R/W volume instead (percent). +whether you definitely want a R/W volume (percent) or whether you'd prefer a +R/O volume, but are willing to use a R/W volume instead (hash). The name of the volume can be suffixes with ".backup" or ".readonly" to specify connection to only volumes of those types. diff --git a/Documentation/filesystems/cramfs.txt b/Documentation/filesystems/cramfs.txt index 4006298f670700b1da158616df1718dde422ef48..8e19a53d648b666cb678caf33a13a17a0278c1df 100644 --- a/Documentation/filesystems/cramfs.txt +++ b/Documentation/filesystems/cramfs.txt @@ -45,6 +45,48 @@ you can just change the #define in mkcramfs.c, so long as you don't mind the filesystem becoming unreadable to future kernels. +Memory Mapped cramfs image +-------------------------- + +The CRAMFS_MTD Kconfig option adds support for loading data directly from +a physical linear memory range (usually non volatile memory like Flash) +instead of going through the block device layer. This saves some memory +since no intermediate buffering is necessary to hold the data before +decompressing. + +And when data blocks are kept uncompressed and properly aligned, they will +automatically be mapped directly into user space whenever possible providing +eXecute-In-Place (XIP) from ROM of read-only segments. Data segments mapped +read-write (hence they have to be copied to RAM) may still be compressed in +the cramfs image in the same file along with non compressed read-only +segments. Both MMU and no-MMU systems are supported. This is particularly +handy for tiny embedded systems with very tight memory constraints. + +The location of the cramfs image in memory is system dependent. You must +know the proper physical address where the cramfs image is located and +configure an MTD device for it. Also, that MTD device must be supported +by a map driver that implements the "point" method. Examples of such +MTD drivers are cfi_cmdset_0001 (Intel/Sharp CFI flash) or physmap +(Flash device in physical memory map). MTD partitions based on such devices +are fine too. Then that device should be specified with the "mtd:" prefix +as the mount device argument. For example, to mount the MTD device named +"fs_partition" on the /mnt directory: + +$ mount -t cramfs mtd:fs_partition /mnt + +To boot a kernel with this as root filesystem, suffice to specify +something like "root=mtd:fs_partition" on the kernel command line. + + +Tools +----- + +A version of mkcramfs that can take advantage of the latest capabilities +described above can be found here: + +https://github.com/npitre/cramfs-tools + + For /usr/share/magic -------------------- diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt index 8caa60734647f70a777b8a568ba9f2dd99182fb8..e6a5f4912b6d4a4910ed1d2fc494fff304ab47ff 100644 --- a/Documentation/filesystems/overlayfs.txt +++ b/Documentation/filesystems/overlayfs.txt @@ -156,6 +156,40 @@ handle it in two different ways: root of the overlay. Finally the directory is moved to the new location. +There are several ways to tune the "redirect_dir" feature. + +Kernel config options: + +- OVERLAY_FS_REDIRECT_DIR: + If this is enabled, then redirect_dir is turned on by default. +- OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW: + If this is enabled, then redirects are always followed by default. Enabling + this results in a less secure configuration. Enable this option only when + worried about backward compatibility with kernels that have the redirect_dir + feature and follow redirects even if turned off. + +Module options (can also be changed through /sys/module/overlay/parameters/*): + +- "redirect_dir=BOOL": + See OVERLAY_FS_REDIRECT_DIR kernel config option above. +- "redirect_always_follow=BOOL": + See OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW kernel config option above. +- "redirect_max=NUM": + The maximum number of bytes in an absolute redirect (default is 256). + +Mount options: + +- "redirect_dir=on": + Redirects are enabled. +- "redirect_dir=follow": + Redirects are not created, but followed. +- "redirect_dir=off": + Redirects are not created and only followed if "redirect_always_follow" + feature is enabled in the kernel/module config. +- "redirect_dir=nofollow": + Redirects are not created and not followed (equivalent to "redirect_dir=off" + if "redirect_always_follow" feature is not enabled). + Non-directories --------------- diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index 93e0a24045322b3e2417e024821520c9996eb6fc..17bb4dc28fae03371c328cc2135b576c4235ab03 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -501,10 +501,6 @@ in your dentry operations instead. is non-NULL. Note that link body isn't available anymore, so if you need it, store it as cookie. -- -[mandatory] - __fd_install() & fd_install() can now sleep. Callers should not - hold a spinlock or other resources that do not allow a schedule. --- [mandatory] any symlink that might use page_follow_link_light/page_put_link() must have inode_nohighmem(inode) called before anything might start playing with diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index adba21b5ada7b53fb9d0811039afba37141ed099..2a84bb3348947c1c0302ecfaa3a01a21fa558fef 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -181,6 +181,7 @@ read the file /proc/PID/status: VmPTE: 20 kb VmSwap: 0 kB HugetlbPages: 0 kB + CoreDumping: 0 Threads: 1 SigQ: 0/28578 SigPnd: 0000000000000000 @@ -250,10 +251,11 @@ Table 1-2: Contents of the status files (as of 4.8) VmExe size of text segment VmLib size of shared library code VmPTE size of page table entries - VmPMD size of second level page tables VmSwap amount of swap used by anonymous private data (shmem swap usage is not included) HugetlbPages size of hugetlb memory portions + CoreDumping process's memory is currently being dumped + (killing the process may lead to a corrupted core) Threads number of threads SigQ number of signals queued/max. number for queue SigPnd bitmap of pending signals for the thread diff --git a/Documentation/gpio/gpio-legacy.txt b/Documentation/gpio/gpio-legacy.txt index 5eacc147ea870c80bb06c38d43bd5b662c171194..8356d0e78f679c66bc69af8420eac2c4ace27f41 100644 --- a/Documentation/gpio/gpio-legacy.txt +++ b/Documentation/gpio/gpio-legacy.txt @@ -273,8 +273,8 @@ easily, gating off unused clocks. For GPIOs that use pins known to the pinctrl subsystem, that subsystem should be informed of their use; a gpiolib driver's .request() operation may call -pinctrl_request_gpio(), and a gpiolib driver's .free() operation may call -pinctrl_free_gpio(). The pinctrl subsystem allows a pinctrl_request_gpio() +pinctrl_gpio_request(), and a gpiolib driver's .free() operation may call +pinctrl_gpio_free(). The pinctrl subsystem allows a pinctrl_gpio_request() to succeed concurrently with a pin or pingroup being "owned" by a device for pin multiplexing. @@ -448,8 +448,8 @@ together with an optional gpio feature. We have already covered the case where e.g. a GPIO controller need to reserve a pin or set the direction of a pin by calling any of: -pinctrl_request_gpio() -pinctrl_free_gpio() +pinctrl_gpio_request() +pinctrl_gpio_free() pinctrl_gpio_direction_input() pinctrl_gpio_direction_output() @@ -466,7 +466,7 @@ gpio (under gpiolib) is still maintained by gpio drivers. It may happen that different pin ranges in a SoC is managed by different gpio drivers. This makes it logical to let gpio drivers announce their pin ranges to -the pin ctrl subsystem before it will call 'pinctrl_request_gpio' in order +the pin ctrl subsystem before it will call 'pinctrl_gpio_request' in order to request the corresponding pin to be prepared by the pinctrl subsystem before any gpio usage. diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst index 679373b4a03f2189e14cce4c30686bdc947eb5a1..a2214cc1f821a3bb4b9b096adf3df5e29874a838 100644 --- a/Documentation/gpu/drm-uapi.rst +++ b/Documentation/gpu/drm-uapi.rst @@ -168,6 +168,61 @@ IOCTL Support on Device Nodes .. kernel-doc:: drivers/gpu/drm/drm_ioctl.c :doc: driver specific ioctls +Recommended IOCTL Return Values +------------------------------- + +In theory a driver's IOCTL callback is only allowed to return very few error +codes. In practice it's good to abuse a few more. This section documents common +practice within the DRM subsystem: + +ENOENT: + Strictly this should only be used when a file doesn't exist e.g. when + calling the open() syscall. We reuse that to signal any kind of object + lookup failure, e.g. for unknown GEM buffer object handles, unknown KMS + object handles and similar cases. + +ENOSPC: + Some drivers use this to differentiate "out of kernel memory" from "out + of VRAM". Sometimes also applies to other limited gpu resources used for + rendering (e.g. when you have a special limited compression buffer). + Sometimes resource allocation/reservation issues in command submission + IOCTLs are also signalled through EDEADLK. + + Simply running out of kernel/system memory is signalled through ENOMEM. + +EPERM/EACCESS: + Returned for an operation that is valid, but needs more privileges. + E.g. root-only or much more common, DRM master-only operations return + this when when called by unpriviledged clients. There's no clear + difference between EACCESS and EPERM. + +ENODEV: + Feature (like PRIME, modesetting, GEM) is not supported by the driver. + +ENXIO: + Remote failure, either a hardware transaction (like i2c), but also used + when the exporting driver of a shared dma-buf or fence doesn't support a + feature needed. + +EINTR: + DRM drivers assume that userspace restarts all IOCTLs. Any DRM IOCTL can + return EINTR and in such a case should be restarted with the IOCTL + parameters left unchanged. + +EIO: + The GPU died and couldn't be resurrected through a reset. Modesetting + hardware failures are signalled through the "link status" connector + property. + +EINVAL: + Catch-all for anything that is an invalid argument combination which + cannot work. + +IOCTL also use other error codes like ETIME, EFAULT, EBUSY, ENOTTY but their +usage is in line with the common meanings. The above list tries to just document +DRM specific patterns. Note that ENOTTY has the slightly unintuitive meaning of +"this IOCTL does not exist", and is used exactly as such in DRM. + .. kernel-doc:: include/drm/drm_ioctl.h :internal: diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst index 35d673bf9b569537321d8268c6f594cb9ff6475b..c36586dad29d20bf7b1704efa87f69945c31a542 100644 --- a/Documentation/gpu/index.rst +++ b/Documentation/gpu/index.rst @@ -15,6 +15,7 @@ Linux GPU Driver Developer's Guide pl111 tegra tinydrm + tve200 vc4 vga-switcheroo vgaarbiter diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 22af55d06ab8d6be092cf9d8699a9c4e09cd5260..36625aa66c27672c00219e1283d4ecb034913e40 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -75,17 +75,6 @@ helpers. Contact: Ville Syrjälä, Daniel Vetter, driver maintainers -Implement deferred fbdev setup in the helper --------------------------------------------- - -Many (especially embedded drivers) want to delay fbdev setup until there's a -real screen plugged in. This is to avoid the dreaded fallback to the low-res -fbdev default. Many drivers have a hacked-up (and often broken) version of this, -better to do it once in the shared helpers. Thierry has a patch series, but that -one needs to be rebased and final polish applied. - -Contact: Thierry Reding, Daniel Vetter, driver maintainers - Convert early atomic drivers to async commit helpers ---------------------------------------------------- @@ -138,6 +127,8 @@ interfaces to fix these issues: the acquire context explicitly on stack and then also pass it down into drivers explicitly so that the legacy-on-atomic functions can use them. + Except for some driver code this is done. + * A bunch of the vtable hooks are now in the wrong place: DRM has a split between core vfunc tables (named ``drm_foo_funcs``), which are used to implement the userspace ABI. And then there's the optional hooks for the @@ -151,6 +142,8 @@ interfaces to fix these issues: connector at runtime. That's almost all of them, and would allow us to get rid of a lot of ``best_encoder`` boilerplate in drivers. + This was almost done, but new drivers added a few more cases again. + Contact: Daniel Vetter Get rid of dev->struct_mutex from GEM drivers @@ -177,14 +170,19 @@ following drivers still use ``struct_mutex``: ``msm``, ``omapdrm`` and Contact: Daniel Vetter, respective driver maintainers -Core refactorings -================= +Convert instances of dev_info/dev_err/dev_warn to their DRM_DEV_* equivalent +---------------------------------------------------------------------------- -Use new IDR deletion interface to clean up drm_gem_handle_delete() ------------------------------------------------------------------- +For drivers which could have multiple instances, it is necessary to +differentiate between which is which in the logs. Since DRM_INFO/WARN/ERROR +don't do this, drivers used dev_info/warn/err to make this differentiation. We +now have DRM_DEV_* variants of the drm print macros, so we can start to convert +those drivers back to using drm-formwatted specific log messages. -See the "This is gross" comment -- apparently the IDR system now can return an -error code instead of oopsing. +Contact: Sean Paul, Maintainer of the driver you plan to convert + +Core refactorings +================= Clean up the DRM header mess ---------------------------- @@ -306,6 +304,18 @@ There's a bunch of issues with it: Contact: Daniel Vetter +KMS cleanups +------------ + +Some of these date from the very introduction of KMS in 2008 ... + +- drm_mode_config.crtc_idr is misnamed, since it contains all KMS object. Should + be renamed to drm_mode_config.object_idr. + +- drm_display_mode doesn't need to be derived from drm_mode_object. That's + leftovers from older (never merged into upstream) KMS designs where modes + where set using their ID, including support to add/remove modes. + Better Testing ============== @@ -353,7 +363,16 @@ those drivers as simple as possible, so lots of room for refactoring: - backlight helpers, probably best to put them into a new drm_backlight.c. This is because drivers/video is de-facto unmaintained. We could also move drivers/video/backlight to drivers/gpu/backlight and take it all - over within drm-misc, but that's more work. + over within drm-misc, but that's more work. Backlight helpers require a fair + bit of reworking and refactoring. A simple example is the enabling of a backlight. + Tinydrm has helpers for this. It would be good if other drivers can also use the + helper. However, there are various cases we need to consider i.e different + drivers seem to have different ways of enabling/disabling a backlight. + We also need to consider the backlight drivers (like gpio_backlight). The situation + is further complicated by the fact that the backlight is tied to fbdev + via fb_notifier_callback() which has complicated logic. For further details, refer + to the following discussion thread: + https://groups.google.com/forum/#!topic/outreachy-kernel/8rBe30lwtdA - spi helpers, probably best put into spi core/helper code. Thierry said the spi maintainer is fast&reactive, so shouldn't be a big issue. @@ -390,5 +409,15 @@ those drivers as simple as possible, so lots of room for refactoring: Contact: Noralf Trønnes, Daniel Vetter +AMD DC Display Driver +--------------------- + +AMD DC is the display driver for AMD devices starting with Vega. There has been +a bunch of progress cleaning it up but there's still plenty of work to be done. + +See drivers/gpu/drm/amd/display/TODO for tasks. + +Contact: Harry Wentland, Alex Deucher + Outside DRM =========== diff --git a/Documentation/gpu/tve200.rst b/Documentation/gpu/tve200.rst new file mode 100644 index 0000000000000000000000000000000000000000..69b17b324e1273bd5353cf9e19bbbee428bfe917 --- /dev/null +++ b/Documentation/gpu/tve200.rst @@ -0,0 +1,6 @@ +================================== + drm/tve200 Faraday TV Encoder 200 +================================== + +.. kernel-doc:: drivers/gpu/drm/tve200/tve200_drv.c + :doc: Faraday TV Encoder 200 diff --git a/Documentation/ia64/xen.txt b/Documentation/ia64/xen.txt index c61a99f7c8bbeefa2d96ef6b9fe3ff5c67e135fb..a12c74ce27734eb78a54b77923e648aaceb03430 100644 --- a/Documentation/ia64/xen.txt +++ b/Documentation/ia64/xen.txt @@ -41,7 +41,7 @@ Getting and Building Xen and Dom0 5. make initrd for Dom0/DomU # make -C linux-2.6.18-xen.hg ARCH=ia64 modules_install \ - O=$(/bin/pwd)/build-linux-2.6.18-xen_ia64 + O=$(pwd)/build-linux-2.6.18-xen_ia64 # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6.18.8-xen.img \ 2.6.18.8-xen --builtin mptspi --builtin mptbase \ --builtin mptscsih --builtin uhci-hcd --builtin ohci-hcd \ diff --git a/Documentation/livepatch/callbacks.txt b/Documentation/livepatch/callbacks.txt new file mode 100644 index 0000000000000000000000000000000000000000..c9776f48e45847d9b33bfd0f42ee04cd54dd45e6 --- /dev/null +++ b/Documentation/livepatch/callbacks.txt @@ -0,0 +1,605 @@ +====================== +(Un)patching Callbacks +====================== + +Livepatch (un)patch-callbacks provide a mechanism for livepatch modules +to execute callback functions when a kernel object is (un)patched. They +can be considered a "power feature" that extends livepatching abilities +to include: + + - Safe updates to global data + + - "Patches" to init and probe functions + + - Patching otherwise unpatchable code (i.e. assembly) + +In most cases, (un)patch callbacks will need to be used in conjunction +with memory barriers and kernel synchronization primitives, like +mutexes/spinlocks, or even stop_machine(), to avoid concurrency issues. + +Callbacks differ from existing kernel facilities: + + - Module init/exit code doesn't run when disabling and re-enabling a + patch. + + - A module notifier can't stop a to-be-patched module from loading. + +Callbacks are part of the klp_object structure and their implementation +is specific to that klp_object. Other livepatch objects may or may not +be patched, irrespective of the target klp_object's current state. + +Callbacks can be registered for the following livepatch actions: + + * Pre-patch - before a klp_object is patched + + * Post-patch - after a klp_object has been patched and is active + across all tasks + + * Pre-unpatch - before a klp_object is unpatched (ie, patched code is + active), used to clean up post-patch callback + resources + + * Post-unpatch - after a klp_object has been patched, all code has + been restored and no tasks are running patched code, + used to cleanup pre-patch callback resources + +Each callback is optional, omitting one does not preclude specifying any +other. However, the livepatching core executes the handlers in +symmetry: pre-patch callbacks have a post-unpatch counterpart and +post-patch callbacks have a pre-unpatch counterpart. An unpatch +callback will only be executed if its corresponding patch callback was +executed. Typical use cases pair a patch handler that acquires and +configures resources with an unpatch handler tears down and releases +those same resources. + +A callback is only executed if its host klp_object is loaded. For +in-kernel vmlinux targets, this means that callbacks will always execute +when a livepatch is enabled/disabled. For patch target kernel modules, +callbacks will only execute if the target module is loaded. When a +module target is (un)loaded, its callbacks will execute only if the +livepatch module is enabled. + +The pre-patch callback, if specified, is expected to return a status +code (0 for success, -ERRNO on error). An error status code indicates +to the livepatching core that patching of the current klp_object is not +safe and to stop the current patching request. (When no pre-patch +callback is provided, the transition is assumed to be safe.) If a +pre-patch callback returns failure, the kernel's module loader will: + + - Refuse to load a livepatch, if the livepatch is loaded after + targeted code. + + or: + + - Refuse to load a module, if the livepatch was already successfully + loaded. + +No post-patch, pre-unpatch, or post-unpatch callbacks will be executed +for a given klp_object if the object failed to patch, due to a failed +pre_patch callback or for any other reason. + +If a patch transition is reversed, no pre-unpatch handlers will be run +(this follows the previously mentioned symmetry -- pre-unpatch callbacks +will only occur if their corresponding post-patch callback executed). + +If the object did successfully patch, but the patch transition never +started for some reason (e.g., if another object failed to patch), +only the post-unpatch callback will be called. + + +Example Use-cases +================= + +Update global data +------------------ + +A pre-patch callback can be useful to update a global variable. For +example, 75ff39ccc1bd ("tcp: make challenge acks less predictable") +changes a global sysctl, as well as patches the tcp_send_challenge_ack() +function. + +In this case, if we're being super paranoid, it might make sense to +patch the data *after* patching is complete with a post-patch callback, +so that tcp_send_challenge_ack() could first be changed to read +sysctl_tcp_challenge_ack_limit with READ_ONCE. + + +Support __init and probe function patches +----------------------------------------- + +Although __init and probe functions are not directly livepatch-able, it +may be possible to implement similar updates via pre/post-patch +callbacks. + +48900cb6af42 ("virtio-net: drop NETIF_F_FRAGLIST") change the way that +virtnet_probe() initialized its driver's net_device features. A +pre/post-patch callback could iterate over all such devices, making a +similar change to their hw_features value. (Client functions of the +value may need to be updated accordingly.) + + +Test cases +========== + +What follows is not an exhaustive test suite of every possible livepatch +pre/post-(un)patch combination, but a selection that demonstrates a few +important concepts. Each test case uses the kernel modules located in +the samples/livepatch/ and assumes that no livepatches are loaded at the +beginning of the test. + + +Test 1 +------ + +Test a combination of loading a kernel module and a livepatch that +patches a function in the first module. (Un)load the target module +before the livepatch module: + +- load target module +- load livepatch +- disable livepatch +- unload target module +- unload livepatch + +First load a target module: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 34.475708] livepatch_callbacks_mod: livepatch_callbacks_mod_init + +On livepatch enable, before the livepatch transition starts, pre-patch +callbacks are executed for vmlinux and livepatch_callbacks_mod (those +klp_objects currently loaded). After klp_objects are patched according +to the klp_patch, their post-patch callbacks run and the transition +completes: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 36.503719] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 36.504213] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 36.504238] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 36.504721] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 36.505849] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 37.727133] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 37.727232] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 37.727860] livepatch_callbacks_demo: post_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 37.728792] livepatch: 'livepatch_callbacks_demo': patching complete + +Similarly, on livepatch disable, pre-patch callbacks run before the +unpatching transition starts. klp_objects are reverted, post-patch +callbacks execute and the transition completes: + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 38.510209] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 38.510234] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 38.510982] livepatch_callbacks_demo: pre_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 38.512209] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 39.711132] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 39.711210] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 39.711779] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 39.712735] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 42.534183] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + + +Test 2 +------ + +This test is similar to the previous test, but (un)load the livepatch +module before the target kernel module. This tests the livepatch core's +module_coming handler: + +- load livepatch +- load target module +- disable livepatch +- unload livepatch +- unload target module + + +On livepatch enable, only pre/post-patch callbacks are executed for +currently loaded klp_objects, in this case, vmlinux: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 44.553328] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 44.553997] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 44.554049] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 44.554845] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 45.727128] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 45.727212] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 45.727961] livepatch: 'livepatch_callbacks_demo': patching complete + +When a targeted module is subsequently loaded, only its pre/post-patch +callbacks are executed: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 46.560845] livepatch: applying patch 'livepatch_callbacks_demo' to loading module 'livepatch_callbacks_mod' + [ 46.561988] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 46.563452] livepatch_callbacks_demo: post_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 46.565495] livepatch_callbacks_mod: livepatch_callbacks_mod_init + +On livepatch disable, all currently loaded klp_objects' (vmlinux and +livepatch_callbacks_mod) pre/post-unpatch callbacks are executed: + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 48.568885] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 48.568910] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 48.569441] livepatch_callbacks_demo: pre_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 48.570502] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 49.759091] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 49.759171] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 49.759742] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 49.760690] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 52.592283] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + + +Test 3 +------ + +Test loading the livepatch after a targeted kernel module, then unload +the kernel module before disabling the livepatch. This tests the +livepatch core's module_going handler: + +- load target module +- load livepatch +- unload target module +- disable livepatch +- unload livepatch + +First load a target module, then the livepatch: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 54.607948] livepatch_callbacks_mod: livepatch_callbacks_mod_init + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 56.613919] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 56.614411] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 56.614436] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 56.614818] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 56.615656] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 57.759070] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 57.759147] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 57.759621] livepatch_callbacks_demo: post_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 57.760307] livepatch: 'livepatch_callbacks_demo': patching complete + +When a target module is unloaded, the livepatch is only reverted from +that klp_object (livepatch_callbacks_mod). As such, only its pre and +post-unpatch callbacks are executed when this occurs: + + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 58.623409] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + [ 58.623903] livepatch_callbacks_demo: pre_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + [ 58.624658] livepatch: reverting patch 'livepatch_callbacks_demo' on unloading module 'livepatch_callbacks_mod' + [ 58.625305] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + +When the livepatch is disabled, pre and post-unpatch callbacks are run +for the remaining klp_object, vmlinux: + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 60.638420] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 60.638444] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 60.638996] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 61.727088] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 61.727165] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 61.727985] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + + +Test 4 +------ + +This test is similar to the previous test, however the livepatch is +loaded first. This tests the livepatch core's module_coming and +module_going handlers: + +- load livepatch +- load target module +- unload target module +- disable livepatch +- unload livepatch + +First load the livepatch: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 64.661552] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 64.662147] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 64.662175] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 64.662850] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 65.695056] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 65.695147] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 65.695561] livepatch: 'livepatch_callbacks_demo': patching complete + +When a targeted kernel module is subsequently loaded, only its +pre/post-patch callbacks are executed: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 66.669196] livepatch: applying patch 'livepatch_callbacks_demo' to loading module 'livepatch_callbacks_mod' + [ 66.669882] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 66.670744] livepatch_callbacks_demo: post_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 66.672873] livepatch_callbacks_mod: livepatch_callbacks_mod_init + +When the target module is unloaded, the livepatch is only reverted from +the livepatch_callbacks_mod klp_object. As such, only pre and +post-unpatch callbacks are executed when this occurs: + + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 68.680065] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + [ 68.680688] livepatch_callbacks_demo: pre_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + [ 68.681452] livepatch: reverting patch 'livepatch_callbacks_demo' on unloading module 'livepatch_callbacks_mod' + [ 68.682094] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 70.689225] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 70.689256] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 70.689882] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 71.711080] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 71.711481] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 71.711988] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + + +Test 5 +------ + +A simple test of loading a livepatch without one of its patch target +klp_objects ever loaded (livepatch_callbacks_mod): + +- load livepatch +- disable livepatch +- unload livepatch + +Load the livepatch: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 74.711081] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 74.711595] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 74.711639] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 74.712272] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 75.743137] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 75.743219] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 75.743867] livepatch: 'livepatch_callbacks_demo': patching complete + +As expected, only pre/post-(un)patch handlers are executed for vmlinux: + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 76.716254] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 76.716278] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 76.716666] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 77.727089] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 77.727194] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 77.727907] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + + +Test 6 +------ + +Test a scenario where a vmlinux pre-patch callback returns a non-zero +status (ie, failure): + +- load target module +- load livepatch -ENODEV +- unload target module + +First load a target module: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 80.740520] livepatch_callbacks_mod: livepatch_callbacks_mod_init + +Load the livepatch module, setting its 'pre_patch_ret' value to -19 +(-ENODEV). When its vmlinux pre-patch callback executed, this status +code will propagate back to the module-loading subsystem. The result is +that the insmod command refuses to load the livepatch module: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko pre_patch_ret=-19 + [ 82.747326] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 82.747743] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 82.747767] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 82.748237] livepatch: pre-patch callback failed for object 'vmlinux' + [ 82.748637] livepatch: failed to enable patch 'livepatch_callbacks_demo' + [ 82.749059] livepatch: 'livepatch_callbacks_demo': canceling transition, going to unpatch + [ 82.749060] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 82.749868] livepatch: 'livepatch_callbacks_demo': unpatching complete + [ 82.765809] insmod: ERROR: could not insert module samples/livepatch/livepatch-callbacks-demo.ko: No such device + + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 84.774238] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + + +Test 7 +------ + +Similar to the previous test, setup a livepatch such that its vmlinux +pre-patch callback returns success. However, when a targeted kernel +module is later loaded, have the livepatch return a failing status code: + +- load livepatch +- setup -ENODEV +- load target module +- disable livepatch +- unload livepatch + +Load the livepatch, notice vmlinux pre-patch callback succeeds: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 86.787845] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 86.788325] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 86.788427] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 86.788821] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 87.711069] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 87.711143] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 87.711886] livepatch: 'livepatch_callbacks_demo': patching complete + +Set a trap so subsequent pre-patch callbacks to this livepatch will +return -ENODEV: + + % echo -19 > /sys/module/livepatch_callbacks_demo/parameters/pre_patch_ret + +The livepatch pre-patch callback for subsequently loaded target modules +will return failure, so the module loader refuses to load the kernel +module. Notice that no post-patch or pre/post-unpatch callbacks are +executed for this klp_object: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 90.796976] livepatch: applying patch 'livepatch_callbacks_demo' to loading module 'livepatch_callbacks_mod' + [ 90.797834] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 90.798900] livepatch: pre-patch callback failed for object 'livepatch_callbacks_mod' + [ 90.799652] livepatch: patch 'livepatch_callbacks_demo' failed for module 'livepatch_callbacks_mod', refusing to load module 'livepatch_callbacks_mod' + [ 90.819737] insmod: ERROR: could not insert module samples/livepatch/livepatch-callbacks-mod.ko: No such device + +However, pre/post-unpatch callbacks run for the vmlinux klp_object: + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 92.823547] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 92.823573] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 92.824331] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 93.727128] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 93.727327] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 93.727861] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + + +Test 8 +------ + +Test loading multiple targeted kernel modules. This test-case is +mainly for comparing with the next test-case. + +- load busy target module (0s sleep), +- load livepatch +- load target module +- unload target module +- disable livepatch +- unload livepatch +- unload busy target module + + +Load a target "busy" kernel module which kicks off a worker function +that immediately exits: + + % insmod samples/livepatch/livepatch-callbacks-busymod.ko sleep_secs=0 + [ 96.910107] livepatch_callbacks_busymod: livepatch_callbacks_mod_init + [ 96.910600] livepatch_callbacks_busymod: busymod_work_func, sleeping 0 seconds ... + [ 96.913024] livepatch_callbacks_busymod: busymod_work_func exit + +Proceed with loading the livepatch and another ordinary target module, +notice that the post-patch callbacks are executed and the transition +completes quickly: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 98.917892] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 98.918426] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 98.918453] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 98.918955] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_busymod -> [MODULE_STATE_LIVE] Normal state + [ 98.923835] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 99.743104] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 99.743156] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 99.743679] livepatch_callbacks_demo: post_patch_callback: livepatch_callbacks_busymod -> [MODULE_STATE_LIVE] Normal state + [ 99.744616] livepatch: 'livepatch_callbacks_demo': patching complete + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 100.930955] livepatch: applying patch 'livepatch_callbacks_demo' to loading module 'livepatch_callbacks_mod' + [ 100.931668] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 100.932645] livepatch_callbacks_demo: post_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 100.934125] livepatch_callbacks_mod: livepatch_callbacks_mod_init + + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 102.942805] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + [ 102.943640] livepatch_callbacks_demo: pre_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + [ 102.944585] livepatch: reverting patch 'livepatch_callbacks_demo' on unloading module 'livepatch_callbacks_mod' + [ 102.945455] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 104.953815] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 104.953838] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 104.954431] livepatch_callbacks_demo: pre_unpatch_callback: livepatch_callbacks_busymod -> [MODULE_STATE_LIVE] Normal state + [ 104.955426] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 106.719073] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 106.722633] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 106.723282] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_busymod -> [MODULE_STATE_LIVE] Normal state + [ 106.724279] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + % rmmod samples/livepatch/livepatch-callbacks-busymod.ko + [ 108.975660] livepatch_callbacks_busymod: livepatch_callbacks_mod_exit + + +Test 9 +------ + +A similar test as the previous one, but force the "busy" kernel module +to do longer work. + +The livepatching core will refuse to patch a task that is currently +executing a to-be-patched function -- the consistency model stalls the +current patch transition until this safety-check is met. Test a +scenario where one of a livepatch's target klp_objects sits on such a +function for a long time. Meanwhile, load and unload other target +kernel modules while the livepatch transition is in progress. + +- load busy target module (30s sleep) +- load livepatch +- load target module +- unload target module +- disable livepatch +- unload livepatch +- unload busy target module + + +Load the "busy" kernel module, this time make it do 30 seconds worth of +work: + + % insmod samples/livepatch/livepatch-callbacks-busymod.ko sleep_secs=30 + [ 110.993362] livepatch_callbacks_busymod: livepatch_callbacks_mod_init + [ 110.994059] livepatch_callbacks_busymod: busymod_work_func, sleeping 30 seconds ... + +Meanwhile, the livepatch is loaded. Notice that the patch transition +does not complete as the targeted "busy" module is sitting on a +to-be-patched function: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 113.000309] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 113.000764] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 113.000791] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 113.001289] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_busymod -> [MODULE_STATE_LIVE] Normal state + [ 113.005208] livepatch: 'livepatch_callbacks_demo': starting patching transition + +Load a second target module (this one is an ordinary idle kernel +module). Note that *no* post-patch callbacks will be executed while the +livepatch is still in transition: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 115.012740] livepatch: applying patch 'livepatch_callbacks_demo' to loading module 'livepatch_callbacks_mod' + [ 115.013406] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 115.015315] livepatch_callbacks_mod: livepatch_callbacks_mod_init + +Request an unload of the simple kernel module. The patch is still +transitioning, so its pre-unpatch callbacks are skipped: + + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 117.022626] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + [ 117.023376] livepatch: reverting patch 'livepatch_callbacks_demo' on unloading module 'livepatch_callbacks_mod' + [ 117.024533] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + +Finally the livepatch is disabled. Since none of the patch's +klp_object's post-patch callbacks executed, the remaining klp_object's +pre-unpatch callbacks are skipped: + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 119.035408] livepatch: 'livepatch_callbacks_demo': reversing transition from patching to unpatching + [ 119.035485] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 119.711166] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 119.714179] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 119.714653] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_busymod -> [MODULE_STATE_LIVE] Normal state + [ 119.715437] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + % rmmod samples/livepatch/livepatch-callbacks-busymod.ko + [ 141.279111] livepatch_callbacks_busymod: busymod_work_func exit + [ 141.279760] livepatch_callbacks_busymod: livepatch_callbacks_mod_exit diff --git a/Documentation/livepatch/shadow-vars.txt b/Documentation/livepatch/shadow-vars.txt new file mode 100644 index 0000000000000000000000000000000000000000..89c66634d600c2753c1b4b68db8dafa7a2b5b106 --- /dev/null +++ b/Documentation/livepatch/shadow-vars.txt @@ -0,0 +1,192 @@ +================ +Shadow Variables +================ + +Shadow variables are a simple way for livepatch modules to associate +additional "shadow" data with existing data structures. Shadow data is +allocated separately from parent data structures, which are left +unmodified. The shadow variable API described in this document is used +to allocate/add and remove/free shadow variables to/from their parents. + +The implementation introduces a global, in-kernel hashtable that +associates pointers to parent objects and a numeric identifier of the +shadow data. The numeric identifier is a simple enumeration that may be +used to describe shadow variable version, class or type, etc. More +specifically, the parent pointer serves as the hashtable key while the +numeric id subsequently filters hashtable queries. Multiple shadow +variables may attach to the same parent object, but their numeric +identifier distinguishes between them. + + +1. Brief API summary +==================== + +(See the full API usage docbook notes in livepatch/shadow.c.) + +A hashtable references all shadow variables. These references are +stored and retrieved through a pair. + +* The klp_shadow variable data structure encapsulates both tracking +meta-data and shadow-data: + - meta-data + - obj - pointer to parent object + - id - data identifier + - data[] - storage for shadow data + +It is important to note that the klp_shadow_alloc() and +klp_shadow_get_or_alloc() calls, described below, store a *copy* of the +data that the functions are provided. Callers should provide whatever +mutual exclusion is required of the shadow data. + +* klp_shadow_get() - retrieve a shadow variable data pointer + - search hashtable for pair + +* klp_shadow_alloc() - allocate and add a new shadow variable + - search hashtable for pair + - if exists + - WARN and return NULL + - if doesn't already exist + - allocate a new shadow variable + - copy data into the new shadow variable + - add to the global hashtable + +* klp_shadow_get_or_alloc() - get existing or alloc a new shadow variable + - search hashtable for pair + - if exists + - return existing shadow variable + - if doesn't already exist + - allocate a new shadow variable + - copy data into the new shadow variable + - add pair to the global hashtable + +* klp_shadow_free() - detach and free a shadow variable + - find and remove a reference from global hashtable + - if found, free shadow variable + +* klp_shadow_free_all() - detach and free all <*, id> shadow variables + - find and remove any <*, id> references from global hashtable + - if found, free shadow variable + + +2. Use cases +============ + +(See the example shadow variable livepatch modules in samples/livepatch/ +for full working demonstrations.) + +For the following use-case examples, consider commit 1d147bfa6429 +("mac80211: fix AP powersave TX vs. wakeup race"), which added a +spinlock to net/mac80211/sta_info.h :: struct sta_info. Each use-case +example can be considered a stand-alone livepatch implementation of this +fix. + + +Matching parent's lifecycle +--------------------------- + +If parent data structures are frequently created and destroyed, it may +be easiest to align their shadow variables lifetimes to the same +allocation and release functions. In this case, the parent data +structure is typically allocated, initialized, then registered in some +manner. Shadow variable allocation and setup can then be considered +part of the parent's initialization and should be completed before the +parent "goes live" (ie, any shadow variable get-API requests are made +for this pair.) + +For commit 1d147bfa6429, when a parent sta_info structure is allocated, +allocate a shadow copy of the ps_lock pointer, then initialize it: + +#define PS_LOCK 1 +struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, + const u8 *addr, gfp_t gfp) +{ + struct sta_info *sta; + spinlock_t *ps_lock; + + /* Parent structure is created */ + sta = kzalloc(sizeof(*sta) + hw->sta_data_size, gfp); + + /* Attach a corresponding shadow variable, then initialize it */ + ps_lock = klp_shadow_alloc(sta, PS_LOCK, NULL, sizeof(*ps_lock), gfp); + if (!ps_lock) + goto shadow_fail; + spin_lock_init(ps_lock); + ... + +When requiring a ps_lock, query the shadow variable API to retrieve one +for a specific struct sta_info: + +void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) +{ + spinlock_t *ps_lock; + + /* sync with ieee80211_tx_h_unicast_ps_buf */ + ps_lock = klp_shadow_get(sta, PS_LOCK); + if (ps_lock) + spin_lock(ps_lock); + ... + +When the parent sta_info structure is freed, first free the shadow +variable: + +void sta_info_free(struct ieee80211_local *local, struct sta_info *sta) +{ + klp_shadow_free(sta, PS_LOCK); + kfree(sta); + ... + + +In-flight parent objects +------------------------ + +Sometimes it may not be convenient or possible to allocate shadow +variables alongside their parent objects. Or a livepatch fix may +require shadow varibles to only a subset of parent object instances. In +these cases, the klp_shadow_get_or_alloc() call can be used to attach +shadow variables to parents already in-flight. + +For commit 1d147bfa6429, a good spot to allocate a shadow spinlock is +inside ieee80211_sta_ps_deliver_wakeup(): + +#define PS_LOCK 1 +void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) +{ + DEFINE_SPINLOCK(ps_lock_fallback); + spinlock_t *ps_lock; + + /* sync with ieee80211_tx_h_unicast_ps_buf */ + ps_lock = klp_shadow_get_or_alloc(sta, PS_LOCK, + &ps_lock_fallback, sizeof(ps_lock_fallback), + GFP_ATOMIC); + if (ps_lock) + spin_lock(ps_lock); + ... + +This usage will create a shadow variable, only if needed, otherwise it +will use one that was already created for this pair. + +Like the previous use-case, the shadow spinlock needs to be cleaned up. +A shadow variable can be freed just before its parent object is freed, +or even when the shadow variable itself is no longer required. + + +Other use-cases +--------------- + +Shadow variables can also be used as a flag indicating that a data +structure was allocated by new, livepatched code. In this case, it +doesn't matter what data value the shadow variable holds, its existence +suggests how to handle the parent object. + + +3. References +============= + +* https://github.com/dynup/kpatch +The livepatch implementation is based on the kpatch version of shadow +variables. + +* http://files.mkgnu.net/files/dynamos/doc/papers/dynamos_eurosys_07.pdf +Dynamic and Adaptive Updates of Non-Quiescent Subsystems in Commodity +Operating System Kernels (Kritis Makris, Kyung Dong Ryu 2007) presented +a datatype update technique called "shadow data structures". diff --git a/Documentation/locking/crossrelease.txt b/Documentation/locking/crossrelease.txt deleted file mode 100644 index bdf1423d5f99e9b5a65e293049fdf0af7675f3b7..0000000000000000000000000000000000000000 --- a/Documentation/locking/crossrelease.txt +++ /dev/null @@ -1,874 +0,0 @@ -Crossrelease -============ - -Started by Byungchul Park - -Contents: - - (*) Background - - - What causes deadlock - - How lockdep works - - (*) Limitation - - - Limit lockdep - - Pros from the limitation - - Cons from the limitation - - Relax the limitation - - (*) Crossrelease - - - Introduce crossrelease - - Introduce commit - - (*) Implementation - - - Data structures - - How crossrelease works - - (*) Optimizations - - - Avoid duplication - - Lockless for hot paths - - (*) APPENDIX A: What lockdep does to work aggresively - - (*) APPENDIX B: How to avoid adding false dependencies - - -========== -Background -========== - -What causes deadlock --------------------- - -A deadlock occurs when a context is waiting for an event to happen, -which is impossible because another (or the) context who can trigger the -event is also waiting for another (or the) event to happen, which is -also impossible due to the same reason. - -For example: - - A context going to trigger event C is waiting for event A to happen. - A context going to trigger event A is waiting for event B to happen. - A context going to trigger event B is waiting for event C to happen. - -A deadlock occurs when these three wait operations run at the same time, -because event C cannot be triggered if event A does not happen, which in -turn cannot be triggered if event B does not happen, which in turn -cannot be triggered if event C does not happen. After all, no event can -be triggered since any of them never meets its condition to wake up. - -A dependency might exist between two waiters and a deadlock might happen -due to an incorrect releationship between dependencies. Thus, we must -define what a dependency is first. A dependency exists between them if: - - 1. There are two waiters waiting for each event at a given time. - 2. The only way to wake up each waiter is to trigger its event. - 3. Whether one can be woken up depends on whether the other can. - -Each wait in the example creates its dependency like: - - Event C depends on event A. - Event A depends on event B. - Event B depends on event C. - - NOTE: Precisely speaking, a dependency is one between whether a - waiter for an event can be woken up and whether another waiter for - another event can be woken up. However from now on, we will describe - a dependency as if it's one between an event and another event for - simplicity. - -And they form circular dependencies like: - - -> C -> A -> B - - / \ - \ / - ---------------- - - where 'A -> B' means that event A depends on event B. - -Such circular dependencies lead to a deadlock since no waiter can meet -its condition to wake up as described. - -CONCLUSION - -Circular dependencies cause a deadlock. - - -How lockdep works ------------------ - -Lockdep tries to detect a deadlock by checking dependencies created by -lock operations, acquire and release. Waiting for a lock corresponds to -waiting for an event, and releasing a lock corresponds to triggering an -event in the previous section. - -In short, lockdep does: - - 1. Detect a new dependency. - 2. Add the dependency into a global graph. - 3. Check if that makes dependencies circular. - 4. Report a deadlock or its possibility if so. - -For example, consider a graph built by lockdep that looks like: - - A -> B - - \ - -> E - / - C -> D - - - where A, B,..., E are different lock classes. - -Lockdep will add a dependency into the graph on detection of a new -dependency. For example, it will add a dependency 'E -> C' when a new -dependency between lock E and lock C is detected. Then the graph will be: - - A -> B - - \ - -> E - - / \ - -> C -> D - \ - / / - \ / - ------------------ - - where A, B,..., E are different lock classes. - -This graph contains a subgraph which demonstrates circular dependencies: - - -> E - - / \ - -> C -> D - \ - / / - \ / - ------------------ - - where C, D and E are different lock classes. - -This is the condition under which a deadlock might occur. Lockdep -reports it on detection after adding a new dependency. This is the way -how lockdep works. - -CONCLUSION - -Lockdep detects a deadlock or its possibility by checking if circular -dependencies were created after adding each new dependency. - - -========== -Limitation -========== - -Limit lockdep -------------- - -Limiting lockdep to work on only typical locks e.g. spin locks and -mutexes, which are released within the acquire context, the -implementation becomes simple but its capacity for detection becomes -limited. Let's check pros and cons in next section. - - -Pros from the limitation ------------------------- - -Given the limitation, when acquiring a lock, locks in a held_locks -cannot be released if the context cannot acquire it so has to wait to -acquire it, which means all waiters for the locks in the held_locks are -stuck. It's an exact case to create dependencies between each lock in -the held_locks and the lock to acquire. - -For example: - - CONTEXT X - --------- - acquire A - acquire B /* Add a dependency 'A -> B' */ - release B - release A - - where A and B are different lock classes. - -When acquiring lock A, the held_locks of CONTEXT X is empty thus no -dependency is added. But when acquiring lock B, lockdep detects and adds -a new dependency 'A -> B' between lock A in the held_locks and lock B. -They can be simply added whenever acquiring each lock. - -And data required by lockdep exists in a local structure, held_locks -embedded in task_struct. Forcing to access the data within the context, -lockdep can avoid racy problems without explicit locks while handling -the local data. - -Lastly, lockdep only needs to keep locks currently being held, to build -a dependency graph. However, relaxing the limitation, it needs to keep -even locks already released, because a decision whether they created -dependencies might be long-deferred. - -To sum up, we can expect several advantages from the limitation: - - 1. Lockdep can easily identify a dependency when acquiring a lock. - 2. Races are avoidable while accessing local locks in a held_locks. - 3. Lockdep only needs to keep locks currently being held. - -CONCLUSION - -Given the limitation, the implementation becomes simple and efficient. - - -Cons from the limitation ------------------------- - -Given the limitation, lockdep is applicable only to typical locks. For -example, page locks for page access or completions for synchronization -cannot work with lockdep. - -Can we detect deadlocks below, under the limitation? - -Example 1: - - CONTEXT X CONTEXT Y CONTEXT Z - --------- --------- ---------- - mutex_lock A - lock_page B - lock_page B - mutex_lock A /* DEADLOCK */ - unlock_page B held by X - unlock_page B - mutex_unlock A - mutex_unlock A - - where A and B are different lock classes. - -No, we cannot. - -Example 2: - - CONTEXT X CONTEXT Y - --------- --------- - mutex_lock A - mutex_lock A - wait_for_complete B /* DEADLOCK */ - complete B - mutex_unlock A - mutex_unlock A - - where A is a lock class and B is a completion variable. - -No, we cannot. - -CONCLUSION - -Given the limitation, lockdep cannot detect a deadlock or its -possibility caused by page locks or completions. - - -Relax the limitation --------------------- - -Under the limitation, things to create dependencies are limited to -typical locks. However, synchronization primitives like page locks and -completions, which are allowed to be released in any context, also -create dependencies and can cause a deadlock. So lockdep should track -these locks to do a better job. We have to relax the limitation for -these locks to work with lockdep. - -Detecting dependencies is very important for lockdep to work because -adding a dependency means adding an opportunity to check whether it -causes a deadlock. The more lockdep adds dependencies, the more it -thoroughly works. Thus Lockdep has to do its best to detect and add as -many true dependencies into a graph as possible. - -For example, considering only typical locks, lockdep builds a graph like: - - A -> B - - \ - -> E - / - C -> D - - - where A, B,..., E are different lock classes. - -On the other hand, under the relaxation, additional dependencies might -be created and added. Assuming additional 'FX -> C' and 'E -> GX' are -added thanks to the relaxation, the graph will be: - - A -> B - - \ - -> E -> GX - / - FX -> C -> D - - - where A, B,..., E, FX and GX are different lock classes, and a suffix - 'X' is added on non-typical locks. - -The latter graph gives us more chances to check circular dependencies -than the former. However, it might suffer performance degradation since -relaxing the limitation, with which design and implementation of lockdep -can be efficient, might introduce inefficiency inevitably. So lockdep -should provide two options, strong detection and efficient detection. - -Choosing efficient detection: - - Lockdep works with only locks restricted to be released within the - acquire context. However, lockdep works efficiently. - -Choosing strong detection: - - Lockdep works with all synchronization primitives. However, lockdep - suffers performance degradation. - -CONCLUSION - -Relaxing the limitation, lockdep can add additional dependencies giving -additional opportunities to check circular dependencies. - - -============ -Crossrelease -============ - -Introduce crossrelease ----------------------- - -In order to allow lockdep to handle additional dependencies by what -might be released in any context, namely 'crosslock', we have to be able -to identify those created by crosslocks. The proposed 'crossrelease' -feature provoides a way to do that. - -Crossrelease feature has to do: - - 1. Identify dependencies created by crosslocks. - 2. Add the dependencies into a dependency graph. - -That's all. Once a meaningful dependency is added into graph, then -lockdep would work with the graph as it did. The most important thing -crossrelease feature has to do is to correctly identify and add true -dependencies into the global graph. - -A dependency e.g. 'A -> B' can be identified only in the A's release -context because a decision required to identify the dependency can be -made only in the release context. That is to decide whether A can be -released so that a waiter for A can be woken up. It cannot be made in -other than the A's release context. - -It's no matter for typical locks because each acquire context is same as -its release context, thus lockdep can decide whether a lock can be -released in the acquire context. However for crosslocks, lockdep cannot -make the decision in the acquire context but has to wait until the -release context is identified. - -Therefore, deadlocks by crosslocks cannot be detected just when it -happens, because those cannot be identified until the crosslocks are -released. However, deadlock possibilities can be detected and it's very -worth. See 'APPENDIX A' section to check why. - -CONCLUSION - -Using crossrelease feature, lockdep can work with what might be released -in any context, namely crosslock. - - -Introduce commit ----------------- - -Since crossrelease defers the work adding true dependencies of -crosslocks until they are actually released, crossrelease has to queue -all acquisitions which might create dependencies with the crosslocks. -Then it identifies dependencies using the queued data in batches at a -proper time. We call it 'commit'. - -There are four types of dependencies: - -1. TT type: 'typical lock A -> typical lock B' - - Just when acquiring B, lockdep can see it's in the A's release - context. So the dependency between A and B can be identified - immediately. Commit is unnecessary. - -2. TC type: 'typical lock A -> crosslock BX' - - Just when acquiring BX, lockdep can see it's in the A's release - context. So the dependency between A and BX can be identified - immediately. Commit is unnecessary, too. - -3. CT type: 'crosslock AX -> typical lock B' - - When acquiring B, lockdep cannot identify the dependency because - there's no way to know if it's in the AX's release context. It has - to wait until the decision can be made. Commit is necessary. - -4. CC type: 'crosslock AX -> crosslock BX' - - When acquiring BX, lockdep cannot identify the dependency because - there's no way to know if it's in the AX's release context. It has - to wait until the decision can be made. Commit is necessary. - But, handling CC type is not implemented yet. It's a future work. - -Lockdep can work without commit for typical locks, but commit step is -necessary once crosslocks are involved. Introducing commit, lockdep -performs three steps. What lockdep does in each step is: - -1. Acquisition: For typical locks, lockdep does what it originally did - and queues the lock so that CT type dependencies can be checked using - it at the commit step. For crosslocks, it saves data which will be - used at the commit step and increases a reference count for it. - -2. Commit: No action is reauired for typical locks. For crosslocks, - lockdep adds CT type dependencies using the data saved at the - acquisition step. - -3. Release: No changes are required for typical locks. When a crosslock - is released, it decreases a reference count for it. - -CONCLUSION - -Crossrelease introduces commit step to handle dependencies of crosslocks -in batches at a proper time. - - -============== -Implementation -============== - -Data structures ---------------- - -Crossrelease introduces two main data structures. - -1. hist_lock - - This is an array embedded in task_struct, for keeping lock history so - that dependencies can be added using them at the commit step. Since - it's local data, it can be accessed locklessly in the owner context. - The array is filled at the acquisition step and consumed at the - commit step. And it's managed in circular manner. - -2. cross_lock - - One per lockdep_map exists. This is for keeping data of crosslocks - and used at the commit step. - - -How crossrelease works ----------------------- - -It's the key of how crossrelease works, to defer necessary works to an -appropriate point in time and perform in at once at the commit step. -Let's take a look with examples step by step, starting from how lockdep -works without crossrelease for typical locks. - - acquire A /* Push A onto held_locks */ - acquire B /* Push B onto held_locks and add 'A -> B' */ - acquire C /* Push C onto held_locks and add 'B -> C' */ - release C /* Pop C from held_locks */ - release B /* Pop B from held_locks */ - release A /* Pop A from held_locks */ - - where A, B and C are different lock classes. - - NOTE: This document assumes that readers already understand how - lockdep works without crossrelease thus omits details. But there's - one thing to note. Lockdep pretends to pop a lock from held_locks - when releasing it. But it's subtly different from the original pop - operation because lockdep allows other than the top to be poped. - -In this case, lockdep adds 'the top of held_locks -> the lock to acquire' -dependency every time acquiring a lock. - -After adding 'A -> B', a dependency graph will be: - - A -> B - - where A and B are different lock classes. - -And after adding 'B -> C', the graph will be: - - A -> B -> C - - where A, B and C are different lock classes. - -Let's performs commit step even for typical locks to add dependencies. -Of course, commit step is not necessary for them, however, it would work -well because this is a more general way. - - acquire A - /* - * Queue A into hist_locks - * - * In hist_locks: A - * In graph: Empty - */ - - acquire B - /* - * Queue B into hist_locks - * - * In hist_locks: A, B - * In graph: Empty - */ - - acquire C - /* - * Queue C into hist_locks - * - * In hist_locks: A, B, C - * In graph: Empty - */ - - commit C - /* - * Add 'C -> ?' - * Answer the following to decide '?' - * What has been queued since acquire C: Nothing - * - * In hist_locks: A, B, C - * In graph: Empty - */ - - release C - - commit B - /* - * Add 'B -> ?' - * Answer the following to decide '?' - * What has been queued since acquire B: C - * - * In hist_locks: A, B, C - * In graph: 'B -> C' - */ - - release B - - commit A - /* - * Add 'A -> ?' - * Answer the following to decide '?' - * What has been queued since acquire A: B, C - * - * In hist_locks: A, B, C - * In graph: 'B -> C', 'A -> B', 'A -> C' - */ - - release A - - where A, B and C are different lock classes. - -In this case, dependencies are added at the commit step as described. - -After commits for A, B and C, the graph will be: - - A -> B -> C - - where A, B and C are different lock classes. - - NOTE: A dependency 'A -> C' is optimized out. - -We can see the former graph built without commit step is same as the -latter graph built using commit steps. Of course the former way leads to -earlier finish for building the graph, which means we can detect a -deadlock or its possibility sooner. So the former way would be prefered -when possible. But we cannot avoid using the latter way for crosslocks. - -Let's look at how commit steps work for crosslocks. In this case, the -commit step is performed only on crosslock AX as real. And it assumes -that the AX release context is different from the AX acquire context. - - BX RELEASE CONTEXT BX ACQUIRE CONTEXT - ------------------ ------------------ - acquire A - /* - * Push A onto held_locks - * Queue A into hist_locks - * - * In held_locks: A - * In hist_locks: A - * In graph: Empty - */ - - acquire BX - /* - * Add 'the top of held_locks -> BX' - * - * In held_locks: A - * In hist_locks: A - * In graph: 'A -> BX' - */ - - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - It must be guaranteed that the following operations are seen after - acquiring BX globally. It can be done by things like barrier. - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - - acquire C - /* - * Push C onto held_locks - * Queue C into hist_locks - * - * In held_locks: C - * In hist_locks: C - * In graph: 'A -> BX' - */ - - release C - /* - * Pop C from held_locks - * - * In held_locks: Empty - * In hist_locks: C - * In graph: 'A -> BX' - */ - acquire D - /* - * Push D onto held_locks - * Queue D into hist_locks - * Add 'the top of held_locks -> D' - * - * In held_locks: A, D - * In hist_locks: A, D - * In graph: 'A -> BX', 'A -> D' - */ - acquire E - /* - * Push E onto held_locks - * Queue E into hist_locks - * - * In held_locks: E - * In hist_locks: C, E - * In graph: 'A -> BX', 'A -> D' - */ - - release E - /* - * Pop E from held_locks - * - * In held_locks: Empty - * In hist_locks: D, E - * In graph: 'A -> BX', 'A -> D' - */ - release D - /* - * Pop D from held_locks - * - * In held_locks: A - * In hist_locks: A, D - * In graph: 'A -> BX', 'A -> D' - */ - commit BX - /* - * Add 'BX -> ?' - * What has been queued since acquire BX: C, E - * - * In held_locks: Empty - * In hist_locks: D, E - * In graph: 'A -> BX', 'A -> D', - * 'BX -> C', 'BX -> E' - */ - - release BX - /* - * In held_locks: Empty - * In hist_locks: D, E - * In graph: 'A -> BX', 'A -> D', - * 'BX -> C', 'BX -> E' - */ - release A - /* - * Pop A from held_locks - * - * In held_locks: Empty - * In hist_locks: A, D - * In graph: 'A -> BX', 'A -> D', - * 'BX -> C', 'BX -> E' - */ - - where A, BX, C,..., E are different lock classes, and a suffix 'X' is - added on crosslocks. - -Crossrelease considers all acquisitions after acqiuring BX are -candidates which might create dependencies with BX. True dependencies -will be determined when identifying the release context of BX. Meanwhile, -all typical locks are queued so that they can be used at the commit step. -And then two dependencies 'BX -> C' and 'BX -> E' are added at the -commit step when identifying the release context. - -The final graph will be, with crossrelease: - - -> C - / - -> BX - - / \ - A - -> E - \ - -> D - - where A, BX, C,..., E are different lock classes, and a suffix 'X' is - added on crosslocks. - -However, the final graph will be, without crossrelease: - - A -> D - - where A and D are different lock classes. - -The former graph has three more dependencies, 'A -> BX', 'BX -> C' and -'BX -> E' giving additional opportunities to check if they cause -deadlocks. This way lockdep can detect a deadlock or its possibility -caused by crosslocks. - -CONCLUSION - -We checked how crossrelease works with several examples. - - -============= -Optimizations -============= - -Avoid duplication ------------------ - -Crossrelease feature uses a cache like what lockdep already uses for -dependency chains, but this time it's for caching CT type dependencies. -Once that dependency is cached, the same will never be added again. - - -Lockless for hot paths ----------------------- - -To keep all locks for later use at the commit step, crossrelease adopts -a local array embedded in task_struct, which makes access to the data -lockless by forcing it to happen only within the owner context. It's -like how lockdep handles held_locks. Lockless implmentation is important -since typical locks are very frequently acquired and released. - - -================================================= -APPENDIX A: What lockdep does to work aggresively -================================================= - -A deadlock actually occurs when all wait operations creating circular -dependencies run at the same time. Even though they don't, a potential -deadlock exists if the problematic dependencies exist. Thus it's -meaningful to detect not only an actual deadlock but also its potential -possibility. The latter is rather valuable. When a deadlock occurs -actually, we can identify what happens in the system by some means or -other even without lockdep. However, there's no way to detect possiblity -without lockdep unless the whole code is parsed in head. It's terrible. -Lockdep does the both, and crossrelease only focuses on the latter. - -Whether or not a deadlock actually occurs depends on several factors. -For example, what order contexts are switched in is a factor. Assuming -circular dependencies exist, a deadlock would occur when contexts are -switched so that all wait operations creating the dependencies run -simultaneously. Thus to detect a deadlock possibility even in the case -that it has not occured yet, lockdep should consider all possible -combinations of dependencies, trying to: - -1. Use a global dependency graph. - - Lockdep combines all dependencies into one global graph and uses them, - regardless of which context generates them or what order contexts are - switched in. Aggregated dependencies are only considered so they are - prone to be circular if a problem exists. - -2. Check dependencies between classes instead of instances. - - What actually causes a deadlock are instances of lock. However, - lockdep checks dependencies between classes instead of instances. - This way lockdep can detect a deadlock which has not happened but - might happen in future by others but the same class. - -3. Assume all acquisitions lead to waiting. - - Although locks might be acquired without waiting which is essential - to create dependencies, lockdep assumes all acquisitions lead to - waiting since it might be true some time or another. - -CONCLUSION - -Lockdep detects not only an actual deadlock but also its possibility, -and the latter is more valuable. - - -================================================== -APPENDIX B: How to avoid adding false dependencies -================================================== - -Remind what a dependency is. A dependency exists if: - - 1. There are two waiters waiting for each event at a given time. - 2. The only way to wake up each waiter is to trigger its event. - 3. Whether one can be woken up depends on whether the other can. - -For example: - - acquire A - acquire B /* A dependency 'A -> B' exists */ - release B - release A - - where A and B are different lock classes. - -A depedency 'A -> B' exists since: - - 1. A waiter for A and a waiter for B might exist when acquiring B. - 2. Only way to wake up each is to release what it waits for. - 3. Whether the waiter for A can be woken up depends on whether the - other can. IOW, TASK X cannot release A if it fails to acquire B. - -For another example: - - TASK X TASK Y - ------ ------ - acquire AX - acquire B /* A dependency 'AX -> B' exists */ - release B - release AX held by Y - - where AX and B are different lock classes, and a suffix 'X' is added - on crosslocks. - -Even in this case involving crosslocks, the same rule can be applied. A -depedency 'AX -> B' exists since: - - 1. A waiter for AX and a waiter for B might exist when acquiring B. - 2. Only way to wake up each is to release what it waits for. - 3. Whether the waiter for AX can be woken up depends on whether the - other can. IOW, TASK X cannot release AX if it fails to acquire B. - -Let's take a look at more complicated example: - - TASK X TASK Y - ------ ------ - acquire B - release B - fork Y - acquire AX - acquire C /* A dependency 'AX -> C' exists */ - release C - release AX held by Y - - where AX, B and C are different lock classes, and a suffix 'X' is - added on crosslocks. - -Does a dependency 'AX -> B' exist? Nope. - -Two waiters are essential to create a dependency. However, waiters for -AX and B to create 'AX -> B' cannot exist at the same time in this -example. Thus the dependency 'AX -> B' cannot be created. - -It would be ideal if the full set of true ones can be considered. But -we can ensure nothing but what actually happened. Relying on what -actually happens at runtime, we can anyway add only true ones, though -they might be a subset of true ones. It's similar to how lockdep works -for typical locks. There might be more true dependencies than what -lockdep has detected in runtime. Lockdep has no choice but to rely on -what actually happens. Crossrelease also relies on it. - -CONCLUSION - -Relying on what actually happens, lockdep can avoid adding false -dependencies. diff --git a/Documentation/media/cec.h.rst.exceptions b/Documentation/media/cec.h.rst.exceptions index b1687532742f91787ae2b7fd8ac3acd87026de66..d9fd092de6f8b3fae015e1f09658007dfadef6b7 100644 --- a/Documentation/media/cec.h.rst.exceptions +++ b/Documentation/media/cec.h.rst.exceptions @@ -24,8 +24,6 @@ ignore define CEC_VENDOR_ID_NONE ignore define CEC_MODE_INITIATOR_MSK ignore define CEC_MODE_FOLLOWER_MSK -ignore define CEC_EVENT_FL_INITIAL_STATE - # Part of CEC 2.0 spec - shouldn't be documented too? ignore define CEC_LOG_ADDR_TV ignore define CEC_LOG_ADDR_RECORD_1 diff --git a/Documentation/media/dvb-drivers/frontends.rst b/Documentation/media/dvb-drivers/frontends.rst new file mode 100644 index 0000000000000000000000000000000000000000..1f5f5798919627411ec88a2a96097d5fa6444c8a --- /dev/null +++ b/Documentation/media/dvb-drivers/frontends.rst @@ -0,0 +1,30 @@ +**************** +Frontend drivers +**************** + +Frontend attach headers +*********************** + +.. Keep it on alphabetic order + +.. kernel-doc:: drivers/media/dvb-frontends/a8293.h +.. kernel-doc:: drivers/media/dvb-frontends/af9013.h +.. kernel-doc:: drivers/media/dvb-frontends/ascot2e.h +.. kernel-doc:: drivers/media/dvb-frontends/cxd2820r.h +.. kernel-doc:: drivers/media/dvb-frontends/drxk.h +.. kernel-doc:: drivers/media/dvb-frontends/dvb-pll.h +.. kernel-doc:: drivers/media/dvb-frontends/helene.h +.. kernel-doc:: drivers/media/dvb-frontends/horus3a.h +.. kernel-doc:: drivers/media/dvb-frontends/ix2505v.h +.. kernel-doc:: drivers/media/dvb-frontends/m88ds3103.h +.. kernel-doc:: drivers/media/dvb-frontends/mb86a20s.h +.. kernel-doc:: drivers/media/dvb-frontends/mn88472.h +.. kernel-doc:: drivers/media/dvb-frontends/rtl2830.h +.. kernel-doc:: drivers/media/dvb-frontends/rtl2832.h +.. kernel-doc:: drivers/media/dvb-frontends/rtl2832_sdr.h +.. kernel-doc:: drivers/media/dvb-frontends/stb6000.h +.. kernel-doc:: drivers/media/dvb-frontends/tda10071.h +.. kernel-doc:: drivers/media/dvb-frontends/tda826x.h +.. kernel-doc:: drivers/media/dvb-frontends/zd1301_demod.h +.. kernel-doc:: drivers/media/dvb-frontends/zl10036.h + diff --git a/Documentation/media/dvb-drivers/index.rst b/Documentation/media/dvb-drivers/index.rst index 376141143ae91d46a953b49bc9338fd7c9d9b203..314e127d82e310e42f97a96a21dbf566db6b43ab 100644 --- a/Documentation/media/dvb-drivers/index.rst +++ b/Documentation/media/dvb-drivers/index.rst @@ -41,4 +41,5 @@ For more details see the file COPYING in the source distribution of Linux. technisat ttusb-dec udev + frontends contributors diff --git a/Documentation/media/kapi/cec-core.rst b/Documentation/media/kapi/cec-core.rst index 28866259998c9f547e01fa2f5a52e03a681b8814..d37e107f2fde5fe092474dd375dc8e96ad17a9f5 100644 --- a/Documentation/media/kapi/cec-core.rst +++ b/Documentation/media/kapi/cec-core.rst @@ -227,8 +227,8 @@ CEC_TX_STATUS_LOW_DRIVE: retransmission. CEC_TX_STATUS_ERROR: - some unspecified error occurred: this can be one of - the previous two if the hardware cannot differentiate or something + some unspecified error occurred: this can be one of ARB_LOST + or LOW_DRIVE if the hardware cannot differentiate or something else entirely. CEC_TX_STATUS_MAX_RETRIES: @@ -238,6 +238,9 @@ CEC_TX_STATUS_MAX_RETRIES: doesn't have to make another attempt to transmit the message since the hardware did that already. +The hardware must be able to differentiate between OK, NACK and 'something +else'. + The \*_cnt arguments are the number of error conditions that were seen. This may be 0 if no information is available. Drivers that do not support hardware retry can just set the counter corresponding to the transmit error diff --git a/Documentation/media/kapi/dtv-ca.rst b/Documentation/media/kapi/dtv-ca.rst new file mode 100644 index 0000000000000000000000000000000000000000..a4dd700189b0851399321e4811f804592e78fe92 --- /dev/null +++ b/Documentation/media/kapi/dtv-ca.rst @@ -0,0 +1,4 @@ +Digital TV Conditional Access kABI +---------------------------------- + +.. kernel-doc:: drivers/media/dvb-core/dvb_ca_en50221.h diff --git a/Documentation/media/kapi/dtv-common.rst b/Documentation/media/kapi/dtv-common.rst new file mode 100644 index 0000000000000000000000000000000000000000..40cf1033b5e1f934af49c2bb37cf67d40d09bcd9 --- /dev/null +++ b/Documentation/media/kapi/dtv-common.rst @@ -0,0 +1,55 @@ +Digital TV Common functions +--------------------------- + +Math functions +~~~~~~~~~~~~~~ + +Provide some commonly-used math functions, usually required in order to +estimate signal strength and signal to noise measurements in dB. + +.. kernel-doc:: drivers/media/dvb-core/dvb_math.h + + +DVB devices +~~~~~~~~~~~ + +Those functions are responsible for handling the DVB device nodes. + +.. kernel-doc:: drivers/media/dvb-core/dvbdev.h + +Digital TV Ring buffer +~~~~~~~~~~~~~~~~~~~~~~ + +Those routines implement ring buffers used to handle digital TV data and +copy it from/to userspace. + +.. note:: + + 1) For performance reasons read and write routines don't check buffer sizes + and/or number of bytes free/available. This has to be done before these + routines are called. For example: + + .. code-block:: c + + /* write @buflen: bytes */ + free = dvb_ringbuffer_free(rbuf); + if (free >= buflen) + count = dvb_ringbuffer_write(rbuf, buffer, buflen); + else + /* do something */ + + /* read min. 1000, max. @bufsize: bytes */ + avail = dvb_ringbuffer_avail(rbuf); + if (avail >= 1000) + count = dvb_ringbuffer_read(rbuf, buffer, min(avail, bufsize)); + else + /* do something */ + + 2) If there is exactly one reader and one writer, there is no need + to lock read or write operations. + Two or more readers must be locked against each other. + Flushing the buffer counts as a read operation. + Resetting the buffer counts as a read and write operation. + Two or more writers must be locked against each other. + +.. kernel-doc:: drivers/media/dvb-core/dvb_ringbuffer.h diff --git a/Documentation/media/kapi/dtv-core.rst b/Documentation/media/kapi/dtv-core.rst index de9a228aca8a862ff585b374a498bbc9d103ef1c..bca743dc6b435396f470b9b6b82e62b505465c1e 100644 --- a/Documentation/media/kapi/dtv-core.rst +++ b/Documentation/media/kapi/dtv-core.rst @@ -26,572 +26,12 @@ I2C bus. abandoned standard, not used anymore) and ATSC version 3.0 current proposals. Currently, the DVB subsystem doesn't implement those standards. -Digital TV Common functions ---------------------------- -.. kernel-doc:: drivers/media/dvb-core/dvb_math.h +.. toctree:: + :maxdepth: 1 -.. kernel-doc:: drivers/media/dvb-core/dvbdev.h - -Digital TV Ring buffer ----------------------- - -Those routines implement ring buffers used to handle digital TV data and -copy it from/to userspace. - -.. note:: - - 1) For performance reasons read and write routines don't check buffer sizes - and/or number of bytes free/available. This has to be done before these - routines are called. For example: - - .. code-block:: c - - /* write @buflen: bytes */ - free = dvb_ringbuffer_free(rbuf); - if (free >= buflen) - count = dvb_ringbuffer_write(rbuf, buffer, buflen); - else - /* do something */ - - /* read min. 1000, max. @bufsize: bytes */ - avail = dvb_ringbuffer_avail(rbuf); - if (avail >= 1000) - count = dvb_ringbuffer_read(rbuf, buffer, min(avail, bufsize)); - else - /* do something */ - - 2) If there is exactly one reader and one writer, there is no need - to lock read or write operations. - Two or more readers must be locked against each other. - Flushing the buffer counts as a read operation. - Resetting the buffer counts as a read and write operation. - Two or more writers must be locked against each other. - -.. kernel-doc:: drivers/media/dvb-core/dvb_ringbuffer.h - - -Digital TV Frontend kABI ------------------------- - -Digital TV Frontend -~~~~~~~~~~~~~~~~~~~ - -The Digital TV Frontend kABI defines a driver-internal interface for -registering low-level, hardware specific driver to a hardware independent -frontend layer. It is only of interest for Digital TV device driver writers. -The header file for this API is named ``dvb_frontend.h`` and located in -``drivers/media/dvb-core``. - -Demodulator driver -^^^^^^^^^^^^^^^^^^ - -The demodulator driver is responsible to talk with the decoding part of the -hardware. Such driver should implement :c:type:`dvb_frontend_ops`, with -tells what type of digital TV standards are supported, and points to a -series of functions that allow the DVB core to command the hardware via -the code under ``drivers/media/dvb-core/dvb_frontend.c``. - -A typical example of such struct in a driver ``foo`` is:: - - static struct dvb_frontend_ops foo_ops = { - .delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A }, - .info = { - .name = "foo DVB-T/T2/C driver", - .caps = FE_CAN_FEC_1_2 | - FE_CAN_FEC_2_3 | - FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | - FE_CAN_FEC_7_8 | - FE_CAN_FEC_AUTO | - FE_CAN_QPSK | - FE_CAN_QAM_16 | - FE_CAN_QAM_32 | - FE_CAN_QAM_64 | - FE_CAN_QAM_128 | - FE_CAN_QAM_256 | - FE_CAN_QAM_AUTO | - FE_CAN_TRANSMISSION_MODE_AUTO | - FE_CAN_GUARD_INTERVAL_AUTO | - FE_CAN_HIERARCHY_AUTO | - FE_CAN_MUTE_TS | - FE_CAN_2G_MODULATION, - .frequency_min = 42000000, /* Hz */ - .frequency_max = 1002000000, /* Hz */ - .symbol_rate_min = 870000, - .symbol_rate_max = 11700000 - }, - .init = foo_init, - .sleep = foo_sleep, - .release = foo_release, - .set_frontend = foo_set_frontend, - .get_frontend = foo_get_frontend, - .read_status = foo_get_status_and_stats, - .tune = foo_tune, - .i2c_gate_ctrl = foo_i2c_gate_ctrl, - .get_frontend_algo = foo_get_algo, - }; - -A typical example of such struct in a driver ``bar`` meant to be used on -Satellite TV reception is:: - - static const struct dvb_frontend_ops bar_ops = { - .delsys = { SYS_DVBS, SYS_DVBS2 }, - .info = { - .name = "Bar DVB-S/S2 demodulator", - .frequency_min = 500000, /* KHz */ - .frequency_max = 2500000, /* KHz */ - .frequency_stepsize = 0, - .symbol_rate_min = 1000000, - .symbol_rate_max = 45000000, - .symbol_rate_tolerance = 500, - .caps = FE_CAN_INVERSION_AUTO | - FE_CAN_FEC_AUTO | - FE_CAN_QPSK, - }, - .init = bar_init, - .sleep = bar_sleep, - .release = bar_release, - .set_frontend = bar_set_frontend, - .get_frontend = bar_get_frontend, - .read_status = bar_get_status_and_stats, - .i2c_gate_ctrl = bar_i2c_gate_ctrl, - .get_frontend_algo = bar_get_algo, - .tune = bar_tune, - - /* Satellite-specific */ - .diseqc_send_master_cmd = bar_send_diseqc_msg, - .diseqc_send_burst = bar_send_burst, - .set_tone = bar_set_tone, - .set_voltage = bar_set_voltage, - }; - -.. note:: - - #) For satellite digital TV standards (DVB-S, DVB-S2, ISDB-S), the - frequencies are specified in kHz, while, for terrestrial and cable - standards, they're specified in Hz. Due to that, if the same frontend - supports both types, you'll need to have two separate - :c:type:`dvb_frontend_ops` structures, one for each standard. - #) The ``.i2c_gate_ctrl`` field is present only when the hardware has - allows controlling an I2C gate (either directly of via some GPIO pin), - in order to remove the tuner from the I2C bus after a channel is - tuned. - #) All new drivers should implement the - :ref:`DVBv5 statistics ` via ``.read_status``. - Yet, there are a number of callbacks meant to get statistics for - signal strength, S/N and UCB. Those are there to provide backward - compatibility with legacy applications that don't support the DVBv5 - API. Implementing those callbacks are optional. Those callbacks may be - removed in the future, after we have all existing drivers supporting - DVBv5 stats. - #) Other callbacks are required for satellite TV standards, in order to - control LNBf and DiSEqC: ``.diseqc_send_master_cmd``, - ``.diseqc_send_burst``, ``.set_tone``, ``.set_voltage``. - -.. |delta| unicode:: U+00394 - -The ``drivers/media/dvb-core/dvb_frontend.c`` has a kernel thread with is -responsible for tuning the device. It supports multiple algoritms to -detect a channel, as defined at enum :c:func:`dvbfe_algo`. - -The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver -doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to -``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning, -e. g. it will try first to use the specified center frequency ``f``, -then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|, -``f`` - 2 x |delta| and so on. - -If the hardware has internally a some sort of zigzag algorithm, you should -define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``. - -.. note:: - - The core frontend support also supports - a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to - define its own hardware-assisted algorithm. Very few hardware need to - use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other - function callbacks at struct :c:type:`dvb_frontend_ops`. - -Attaching frontend driver to the bridge driver -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Before using the Digital TV frontend core, the bridge driver should attach -the frontend demod, tuner and SEC devices and call -:c:func:`dvb_register_frontend()`, -in order to register the new frontend at the subsystem. At device -detach/removal, the bridge driver should call -:c:func:`dvb_unregister_frontend()` to -remove the frontend from the core and then :c:func:`dvb_frontend_detach()` -to free the memory allocated by the frontend drivers. - -The drivers should also call :c:func:`dvb_frontend_suspend()` as part of -their handler for the :c:type:`device_driver`.\ ``suspend()``, and -:c:func:`dvb_frontend_resume()` as -part of their handler for :c:type:`device_driver`.\ ``resume()``. - -A few other optional functions are provided to handle some special cases. - -.. _dvbv5_stats: - -Digital TV Frontend statistics -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Introduction -^^^^^^^^^^^^ - -Digital TV frontends provide a range of -:ref:`statistics ` meant to help tuning the device -and measuring the quality of service. - -For each statistics measurement, the driver should set the type of scale used, -or ``FE_SCALE_NOT_AVAILABLE`` if the statistics is not available on a given -time. Drivers should also provide the number of statistics for each type. -that's usually 1 for most video standards [#f2]_. - -Drivers should initialize each statistic counters with length and -scale at its init code. For example, if the frontend provides signal -strength, it should have, on its init code:: - - struct dtv_frontend_properties *c = &state->fe.dtv_property_cache; - - c->strength.len = 1; - c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; - -And, when the statistics got updated, set the scale:: - - c->strength.stat[0].scale = FE_SCALE_DECIBEL; - c->strength.stat[0].uvalue = strength; - -.. [#f2] For ISDB-T, it may provide both a global statistics and a per-layer - set of statistics. On such cases, len should be equal to 4. The first - value corresponds to the global stat; the other ones to each layer, e. g.: - - - c->cnr.stat[0] for global S/N carrier ratio, - - c->cnr.stat[1] for Layer A S/N carrier ratio, - - c->cnr.stat[2] for layer B S/N carrier ratio, - - c->cnr.stat[3] for layer C S/N carrier ratio. - -.. note:: Please prefer to use ``FE_SCALE_DECIBEL`` instead of - ``FE_SCALE_RELATIVE`` for signal strength and CNR measurements. - -Groups of statistics -^^^^^^^^^^^^^^^^^^^^ - -There are several groups of statistics currently supported: - -Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`) - - Measures the signal strength level at the analog part of the tuner or - demod. - - - Typically obtained from the gain applied to the tuner and/or frontend - in order to detect the carrier. When no carrier is detected, the gain is - at the maximum value (so, strength is on its minimal). - - - As the gain is visible through the set of registers that adjust the gain, - typically, this statistics is always available [#f3]_. - - - Drivers should try to make it available all the times, as this statistics - can be used when adjusting an antenna position and to check for troubles - at the cabling. - - .. [#f3] On a few devices, the gain keeps floating if no carrier. - On such devices, strength report should check first if carrier is - detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`), - and otherwise return the lowest possible value. - -Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`) - - Signal to Noise ratio for the main carrier. - - - Signal to Noise measurement depends on the device. On some hardware, is - available when the main carrier is detected. On those hardware, CNR - measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``, - see :c:type:`fe_status`). - - On other devices, it requires inner FEC decoding, - as the frontend measures it indirectly from other parameters (e. g. after - ``FE_HAS_VITERBI``, see :c:type:`fe_status`). - - Having it available after inner FEC is more common. - -Bit counts post-FEC (:ref:`DTV-STAT-POST-ERROR-BIT-COUNT` and :ref:`DTV-STAT-POST-TOTAL-BIT-COUNT`) - - Those counters measure the number of bits and bit errors errors after - the forward error correction (FEC) on the inner coding block - (after Viterbi, LDPC or other inner code). - - - Due to its nature, those statistics depend on full coding lock - (e. g. after ``FE_HAS_SYNC`` or after ``FE_HAS_LOCK``, - see :c:type:`fe_status`). - -Bit counts pre-FEC (:ref:`DTV-STAT-PRE-ERROR-BIT-COUNT` and :ref:`DTV-STAT-PRE-TOTAL-BIT-COUNT`) - - Those counters measure the number of bits and bit errors errors before - the forward error correction (FEC) on the inner coding block - (before Viterbi, LDPC or other inner code). - - - Not all frontends provide this kind of statistics. - - - Due to its nature, those statistics depend on inner coding lock (e. g. - after ``FE_HAS_VITERBI``, see :c:type:`fe_status`). - -Block counts (:ref:`DTV-STAT-ERROR-BLOCK-COUNT` and :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`) - - Those counters measure the number of blocks and block errors errors after - the forward error correction (FEC) on the inner coding block - (before Viterbi, LDPC or other inner code). - - - Due to its nature, those statistics depend on full coding lock - (e. g. after ``FE_HAS_SYNC`` or after - ``FE_HAS_LOCK``, see :c:type:`fe_status`). - -.. note:: All counters should be monotonically increased as they're - collected from the hardware. - -A typical example of the logic that handle status and statistics is:: - - static int foo_get_status_and_stats(struct dvb_frontend *fe) - { - struct foo_state *state = fe->demodulator_priv; - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - - int rc; - enum fe_status *status; - - /* Both status and strength are always available */ - rc = foo_read_status(fe, &status); - if (rc < 0) - return rc; - - rc = foo_read_strength(fe); - if (rc < 0) - return rc; - - /* Check if CNR is available */ - if (!(fe->status & FE_HAS_CARRIER)) - return 0; - - rc = foo_read_cnr(fe); - if (rc < 0) - return rc; - - /* Check if pre-BER stats are available */ - if (!(fe->status & FE_HAS_VITERBI)) - return 0; - - rc = foo_get_pre_ber(fe); - if (rc < 0) - return rc; - - /* Check if post-BER stats are available */ - if (!(fe->status & FE_HAS_SYNC)) - return 0; - - rc = foo_get_post_ber(fe); - if (rc < 0) - return rc; - } - - static const struct dvb_frontend_ops ops = { - /* ... */ - .read_status = foo_get_status_and_stats, - }; - -Statistics collect -^^^^^^^^^^^^^^^^^^ - -On almost all frontend hardware, the bit and byte counts are stored by -the hardware after a certain amount of time or after the total bit/block -counter reaches a certain value (usually programable), for example, on -every 1000 ms or after receiving 1,000,000 bits. - -So, if you read the registers too soon, you'll end by reading the same -value as in the previous reading, causing the monotonic value to be -incremented too often. - -Drivers should take the responsibility to avoid too often reads. That -can be done using two approaches: - -if the driver have a bit that indicates when a collected data is ready -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -Driver should check such bit before making the statistics available. - -An example of such behavior can be found at this code snippet (adapted -from mb86a20s driver's logic):: - - static int foo_get_pre_ber(struct dvb_frontend *fe) - { - struct foo_state *state = fe->demodulator_priv; - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - int rc, bit_error; - - /* Check if the BER measures are already available */ - rc = foo_read_u8(state, 0x54); - if (rc < 0) - return rc; - - if (!rc) - return 0; - - /* Read Bit Error Count */ - bit_error = foo_read_u32(state, 0x55); - if (bit_error < 0) - return bit_error; - - /* Read Total Bit Count */ - rc = foo_read_u32(state, 0x51); - if (rc < 0) - return rc; - - c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; - c->pre_bit_error.stat[0].uvalue += bit_error; - c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; - c->pre_bit_count.stat[0].uvalue += rc; - - return 0; - } - -If the driver doesn't provide a statistics available check bit -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -A few devices, however, may not provide a way to check if the stats are -available (or the way to check it is unknown). They may not even provide -a way to directly read the total number of bits or blocks. - -On those devices, the driver need to ensure that it won't be reading from -the register too often and/or estimate the total number of bits/blocks. - -On such drivers, a typical routine to get statistics would be like -(adapted from dib8000 driver's logic):: - - struct foo_state { - /* ... */ - - unsigned long per_jiffies_stats; - } - - static int foo_get_pre_ber(struct dvb_frontend *fe) - { - struct foo_state *state = fe->demodulator_priv; - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - int rc, bit_error; - u64 bits; - - /* Check if time for stats was elapsed */ - if (!time_after(jiffies, state->per_jiffies_stats)) - return 0; - - /* Next stat should be collected in 1000 ms */ - state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000); - - /* Read Bit Error Count */ - bit_error = foo_read_u32(state, 0x55); - if (bit_error < 0) - return bit_error; - - /* - * On this particular frontend, there's no register that - * would provide the number of bits per 1000ms sample. So, - * some function would calculate it based on DTV properties - */ - bits = get_number_of_bits_per_1000ms(fe); - - c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; - c->pre_bit_error.stat[0].uvalue += bit_error; - c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; - c->pre_bit_count.stat[0].uvalue += bits; - - return 0; - } - -Please notice that, on both cases, we're getting the statistics using the -:c:type:`dvb_frontend_ops` ``.read_status`` callback. The rationale is that -the frontend core will automatically call this function periodically -(usually, 3 times per second, when the frontend is locked). - -That warrants that we won't miss to collect a counter and increment the -monotonic stats at the right time. - -Digital TV Frontend functions and types -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -.. kernel-doc:: drivers/media/dvb-core/dvb_frontend.h - - -Digital TV Demux kABI ---------------------- - -Digital TV Demux -~~~~~~~~~~~~~~~~ - -The Kernel Digital TV Demux kABI defines a driver-internal interface for -registering low-level, hardware specific driver to a hardware independent -demux layer. It is only of interest for Digital TV device driver writers. -The header file for this kABI is named demux.h and located in -drivers/media/dvb-core. - -The demux kABI should be implemented for each demux in the system. It is -used to select the TS source of a demux and to manage the demux resources. -When the demux client allocates a resource via the demux kABI, it receives -a pointer to the kABI of that resource. - -Each demux receives its TS input from a DVB front-end or from memory, as -set via this demux kABI. In a system with more than one front-end, the kABI -can be used to select one of the DVB front-ends as a TS source for a demux, -unless this is fixed in the HW platform. - -The demux kABI only controls front-ends regarding to their connections with -demuxes; the kABI used to set the other front-end parameters, such as -tuning, are devined via the Digital TV Frontend kABI. - -The functions that implement the abstract interface demux should be defined -static or module private and registered to the Demux core for external -access. It is not necessary to implement every function in the struct -&dmx_demux. For example, a demux interface might support Section filtering, -but not PES filtering. The kABI client is expected to check the value of any -function pointer before calling the function: the value of ``NULL`` means -that the function is not available. - -Whenever the functions of the demux API modify shared data, the -possibilities of lost update and race condition problems should be -addressed, e.g. by protecting parts of code with mutexes. - -Note that functions called from a bottom half context must not sleep. -Even a simple memory allocation without using ``GFP_ATOMIC`` can result in a -kernel thread being put to sleep if swapping is needed. For example, the -Linux Kernel calls the functions of a network device interface from a -bottom half context. Thus, if a demux kABI function is called from network -device code, the function must not sleep. - - - -Demux Callback API ------------------- - -Demux Callback -~~~~~~~~~~~~~~ - -This kernel-space API comprises the callback functions that deliver filtered -data to the demux client. Unlike the other DVB kABIs, these functions are -provided by the client and called from the demux code. - -The function pointers of this abstract interface are not packed into a -structure as in the other demux APIs, because the callback functions are -registered and used independent of each other. As an example, it is possible -for the API client to provide several callback functions for receiving TS -packets and no callbacks for PES packets or sections. - -The functions that implement the callback API need not be re-entrant: when -a demux driver calls one of these functions, the driver is not allowed to -call the function again before the original call returns. If a callback is -triggered by a hardware interrupt, it is recommended to use the Linux -bottom half mechanism or start a tasklet instead of making the callback -function call directly from a hardware interrupt. - -This mechanism is implemented by :c:func:`dmx_ts_cb()` and :c:func:`dmx_section_cb()` -callbacks. - -.. kernel-doc:: drivers/media/dvb-core/demux.h - -Digital TV Conditional Access kABI ----------------------------------- - -.. kernel-doc:: drivers/media/dvb-core/dvb_ca_en50221.h + dtv-common + dtv-frontend + dtv-demux + dtv-ca + dtv-net diff --git a/Documentation/media/kapi/dtv-demux.rst b/Documentation/media/kapi/dtv-demux.rst new file mode 100644 index 0000000000000000000000000000000000000000..7aa865a2b43f7cb25a62c46e554be5f75f34f118 --- /dev/null +++ b/Documentation/media/kapi/dtv-demux.rst @@ -0,0 +1,82 @@ +Digital TV Demux kABI +--------------------- + +Digital TV Demux +~~~~~~~~~~~~~~~~ + +The Kernel Digital TV Demux kABI defines a driver-internal interface for +registering low-level, hardware specific driver to a hardware independent +demux layer. It is only of interest for Digital TV device driver writers. +The header file for this kABI is named ``demux.h`` and located in +``drivers/media/dvb-core``. + +The demux kABI should be implemented for each demux in the system. It is +used to select the TS source of a demux and to manage the demux resources. +When the demux client allocates a resource via the demux kABI, it receives +a pointer to the kABI of that resource. + +Each demux receives its TS input from a DVB front-end or from memory, as +set via this demux kABI. In a system with more than one front-end, the kABI +can be used to select one of the DVB front-ends as a TS source for a demux, +unless this is fixed in the HW platform. + +The demux kABI only controls front-ends regarding to their connections with +demuxes; the kABI used to set the other front-end parameters, such as +tuning, are devined via the Digital TV Frontend kABI. + +The functions that implement the abstract interface demux should be defined +static or module private and registered to the Demux core for external +access. It is not necessary to implement every function in the struct +:c:type:`dmx_demux`. For example, a demux interface might support Section filtering, +but not PES filtering. The kABI client is expected to check the value of any +function pointer before calling the function: the value of ``NULL`` means +that the function is not available. + +Whenever the functions of the demux API modify shared data, the +possibilities of lost update and race condition problems should be +addressed, e.g. by protecting parts of code with mutexes. + +Note that functions called from a bottom half context must not sleep. +Even a simple memory allocation without using ``GFP_ATOMIC`` can result in a +kernel thread being put to sleep if swapping is needed. For example, the +Linux Kernel calls the functions of a network device interface from a +bottom half context. Thus, if a demux kABI function is called from network +device code, the function must not sleep. + +Demux Callback API +~~~~~~~~~~~~~~~~~~ + +This kernel-space API comprises the callback functions that deliver filtered +data to the demux client. Unlike the other DVB kABIs, these functions are +provided by the client and called from the demux code. + +The function pointers of this abstract interface are not packed into a +structure as in the other demux APIs, because the callback functions are +registered and used independent of each other. As an example, it is possible +for the API client to provide several callback functions for receiving TS +packets and no callbacks for PES packets or sections. + +The functions that implement the callback API need not be re-entrant: when +a demux driver calls one of these functions, the driver is not allowed to +call the function again before the original call returns. If a callback is +triggered by a hardware interrupt, it is recommended to use the Linux +bottom half mechanism or start a tasklet instead of making the callback +function call directly from a hardware interrupt. + +This mechanism is implemented by :c:func:`dmx_ts_cb()` and :c:func:`dmx_section_cb()` +callbacks. + +Digital TV Demux device registration functions and data structures +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/media/dvb-core/dmxdev.h + +High-level Digital TV demux interface +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/media/dvb-core/dvb_demux.h + +Driver-internal low-level hardware specific driver demux interface +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/media/dvb-core/demux.h diff --git a/Documentation/media/kapi/dtv-frontend.rst b/Documentation/media/kapi/dtv-frontend.rst new file mode 100644 index 0000000000000000000000000000000000000000..f1a2fdaab5ba14f172996efa8fafb959ad29bb9c --- /dev/null +++ b/Documentation/media/kapi/dtv-frontend.rst @@ -0,0 +1,443 @@ +Digital TV Frontend kABI +------------------------ + +Digital TV Frontend +~~~~~~~~~~~~~~~~~~~ + +The Digital TV Frontend kABI defines a driver-internal interface for +registering low-level, hardware specific driver to a hardware independent +frontend layer. It is only of interest for Digital TV device driver writers. +The header file for this API is named ``dvb_frontend.h`` and located in +``drivers/media/dvb-core``. + +Demodulator driver +^^^^^^^^^^^^^^^^^^ + +The demodulator driver is responsible to talk with the decoding part of the +hardware. Such driver should implement :c:type:`dvb_frontend_ops`, with +tells what type of digital TV standards are supported, and points to a +series of functions that allow the DVB core to command the hardware via +the code under ``drivers/media/dvb-core/dvb_frontend.c``. + +A typical example of such struct in a driver ``foo`` is:: + + static struct dvb_frontend_ops foo_ops = { + .delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A }, + .info = { + .name = "foo DVB-T/T2/C driver", + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_QAM_16 | + FE_CAN_QAM_32 | + FE_CAN_QAM_64 | + FE_CAN_QAM_128 | + FE_CAN_QAM_256 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_MUTE_TS | + FE_CAN_2G_MODULATION, + .frequency_min = 42000000, /* Hz */ + .frequency_max = 1002000000, /* Hz */ + .symbol_rate_min = 870000, + .symbol_rate_max = 11700000 + }, + .init = foo_init, + .sleep = foo_sleep, + .release = foo_release, + .set_frontend = foo_set_frontend, + .get_frontend = foo_get_frontend, + .read_status = foo_get_status_and_stats, + .tune = foo_tune, + .i2c_gate_ctrl = foo_i2c_gate_ctrl, + .get_frontend_algo = foo_get_algo, + }; + +A typical example of such struct in a driver ``bar`` meant to be used on +Satellite TV reception is:: + + static const struct dvb_frontend_ops bar_ops = { + .delsys = { SYS_DVBS, SYS_DVBS2 }, + .info = { + .name = "Bar DVB-S/S2 demodulator", + .frequency_min = 500000, /* KHz */ + .frequency_max = 2500000, /* KHz */ + .frequency_stepsize = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK, + }, + .init = bar_init, + .sleep = bar_sleep, + .release = bar_release, + .set_frontend = bar_set_frontend, + .get_frontend = bar_get_frontend, + .read_status = bar_get_status_and_stats, + .i2c_gate_ctrl = bar_i2c_gate_ctrl, + .get_frontend_algo = bar_get_algo, + .tune = bar_tune, + + /* Satellite-specific */ + .diseqc_send_master_cmd = bar_send_diseqc_msg, + .diseqc_send_burst = bar_send_burst, + .set_tone = bar_set_tone, + .set_voltage = bar_set_voltage, + }; + +.. note:: + + #) For satellite digital TV standards (DVB-S, DVB-S2, ISDB-S), the + frequencies are specified in kHz, while, for terrestrial and cable + standards, they're specified in Hz. Due to that, if the same frontend + supports both types, you'll need to have two separate + :c:type:`dvb_frontend_ops` structures, one for each standard. + #) The ``.i2c_gate_ctrl`` field is present only when the hardware has + allows controlling an I2C gate (either directly of via some GPIO pin), + in order to remove the tuner from the I2C bus after a channel is + tuned. + #) All new drivers should implement the + :ref:`DVBv5 statistics ` via ``.read_status``. + Yet, there are a number of callbacks meant to get statistics for + signal strength, S/N and UCB. Those are there to provide backward + compatibility with legacy applications that don't support the DVBv5 + API. Implementing those callbacks are optional. Those callbacks may be + removed in the future, after we have all existing drivers supporting + DVBv5 stats. + #) Other callbacks are required for satellite TV standards, in order to + control LNBf and DiSEqC: ``.diseqc_send_master_cmd``, + ``.diseqc_send_burst``, ``.set_tone``, ``.set_voltage``. + +.. |delta| unicode:: U+00394 + +The ``drivers/media/dvb-core/dvb_frontend.c`` has a kernel thread with is +responsible for tuning the device. It supports multiple algorithms to +detect a channel, as defined at enum :c:func:`dvbfe_algo`. + +The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver +doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to +``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning, +e. g. it will try first to use the specified center frequency ``f``, +then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|, +``f`` - 2 x |delta| and so on. + +If the hardware has internally a some sort of zigzag algorithm, you should +define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``. + +.. note:: + + The core frontend support also supports + a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to + define its own hardware-assisted algorithm. Very few hardware need to + use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other + function callbacks at struct :c:type:`dvb_frontend_ops`. + +Attaching frontend driver to the bridge driver +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Before using the Digital TV frontend core, the bridge driver should attach +the frontend demod, tuner and SEC devices and call +:c:func:`dvb_register_frontend()`, +in order to register the new frontend at the subsystem. At device +detach/removal, the bridge driver should call +:c:func:`dvb_unregister_frontend()` to +remove the frontend from the core and then :c:func:`dvb_frontend_detach()` +to free the memory allocated by the frontend drivers. + +The drivers should also call :c:func:`dvb_frontend_suspend()` as part of +their handler for the :c:type:`device_driver`.\ ``suspend()``, and +:c:func:`dvb_frontend_resume()` as +part of their handler for :c:type:`device_driver`.\ ``resume()``. + +A few other optional functions are provided to handle some special cases. + +.. _dvbv5_stats: + +Digital TV Frontend statistics +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Introduction +^^^^^^^^^^^^ + +Digital TV frontends provide a range of +:ref:`statistics ` meant to help tuning the device +and measuring the quality of service. + +For each statistics measurement, the driver should set the type of scale used, +or ``FE_SCALE_NOT_AVAILABLE`` if the statistics is not available on a given +time. Drivers should also provide the number of statistics for each type. +that's usually 1 for most video standards [#f2]_. + +Drivers should initialize each statistic counters with length and +scale at its init code. For example, if the frontend provides signal +strength, it should have, on its init code:: + + struct dtv_frontend_properties *c = &state->fe.dtv_property_cache; + + c->strength.len = 1; + c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + +And, when the statistics got updated, set the scale:: + + c->strength.stat[0].scale = FE_SCALE_DECIBEL; + c->strength.stat[0].uvalue = strength; + +.. [#f2] For ISDB-T, it may provide both a global statistics and a per-layer + set of statistics. On such cases, len should be equal to 4. The first + value corresponds to the global stat; the other ones to each layer, e. g.: + + - c->cnr.stat[0] for global S/N carrier ratio, + - c->cnr.stat[1] for Layer A S/N carrier ratio, + - c->cnr.stat[2] for layer B S/N carrier ratio, + - c->cnr.stat[3] for layer C S/N carrier ratio. + +.. note:: Please prefer to use ``FE_SCALE_DECIBEL`` instead of + ``FE_SCALE_RELATIVE`` for signal strength and CNR measurements. + +Groups of statistics +^^^^^^^^^^^^^^^^^^^^ + +There are several groups of statistics currently supported: + +Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`) + - Measures the signal strength level at the analog part of the tuner or + demod. + + - Typically obtained from the gain applied to the tuner and/or frontend + in order to detect the carrier. When no carrier is detected, the gain is + at the maximum value (so, strength is on its minimal). + + - As the gain is visible through the set of registers that adjust the gain, + typically, this statistics is always available [#f3]_. + + - Drivers should try to make it available all the times, as this statistics + can be used when adjusting an antenna position and to check for troubles + at the cabling. + + .. [#f3] On a few devices, the gain keeps floating if no carrier. + On such devices, strength report should check first if carrier is + detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`), + and otherwise return the lowest possible value. + +Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`) + - Signal to Noise ratio for the main carrier. + + - Signal to Noise measurement depends on the device. On some hardware, is + available when the main carrier is detected. On those hardware, CNR + measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``, + see :c:type:`fe_status`). + + On other devices, it requires inner FEC decoding, + as the frontend measures it indirectly from other parameters (e. g. after + ``FE_HAS_VITERBI``, see :c:type:`fe_status`). + + Having it available after inner FEC is more common. + +Bit counts post-FEC (:ref:`DTV-STAT-POST-ERROR-BIT-COUNT` and :ref:`DTV-STAT-POST-TOTAL-BIT-COUNT`) + - Those counters measure the number of bits and bit errors errors after + the forward error correction (FEC) on the inner coding block + (after Viterbi, LDPC or other inner code). + + - Due to its nature, those statistics depend on full coding lock + (e. g. after ``FE_HAS_SYNC`` or after ``FE_HAS_LOCK``, + see :c:type:`fe_status`). + +Bit counts pre-FEC (:ref:`DTV-STAT-PRE-ERROR-BIT-COUNT` and :ref:`DTV-STAT-PRE-TOTAL-BIT-COUNT`) + - Those counters measure the number of bits and bit errors errors before + the forward error correction (FEC) on the inner coding block + (before Viterbi, LDPC or other inner code). + + - Not all frontends provide this kind of statistics. + + - Due to its nature, those statistics depend on inner coding lock (e. g. + after ``FE_HAS_VITERBI``, see :c:type:`fe_status`). + +Block counts (:ref:`DTV-STAT-ERROR-BLOCK-COUNT` and :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`) + - Those counters measure the number of blocks and block errors errors after + the forward error correction (FEC) on the inner coding block + (before Viterbi, LDPC or other inner code). + + - Due to its nature, those statistics depend on full coding lock + (e. g. after ``FE_HAS_SYNC`` or after + ``FE_HAS_LOCK``, see :c:type:`fe_status`). + +.. note:: All counters should be monotonically increased as they're + collected from the hardware. + +A typical example of the logic that handle status and statistics is:: + + static int foo_get_status_and_stats(struct dvb_frontend *fe) + { + struct foo_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + int rc; + enum fe_status *status; + + /* Both status and strength are always available */ + rc = foo_read_status(fe, &status); + if (rc < 0) + return rc; + + rc = foo_read_strength(fe); + if (rc < 0) + return rc; + + /* Check if CNR is available */ + if (!(fe->status & FE_HAS_CARRIER)) + return 0; + + rc = foo_read_cnr(fe); + if (rc < 0) + return rc; + + /* Check if pre-BER stats are available */ + if (!(fe->status & FE_HAS_VITERBI)) + return 0; + + rc = foo_get_pre_ber(fe); + if (rc < 0) + return rc; + + /* Check if post-BER stats are available */ + if (!(fe->status & FE_HAS_SYNC)) + return 0; + + rc = foo_get_post_ber(fe); + if (rc < 0) + return rc; + } + + static const struct dvb_frontend_ops ops = { + /* ... */ + .read_status = foo_get_status_and_stats, + }; + +Statistics collect +^^^^^^^^^^^^^^^^^^ + +On almost all frontend hardware, the bit and byte counts are stored by +the hardware after a certain amount of time or after the total bit/block +counter reaches a certain value (usually programable), for example, on +every 1000 ms or after receiving 1,000,000 bits. + +So, if you read the registers too soon, you'll end by reading the same +value as in the previous reading, causing the monotonic value to be +incremented too often. + +Drivers should take the responsibility to avoid too often reads. That +can be done using two approaches: + +if the driver have a bit that indicates when a collected data is ready +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +Driver should check such bit before making the statistics available. + +An example of such behavior can be found at this code snippet (adapted +from mb86a20s driver's logic):: + + static int foo_get_pre_ber(struct dvb_frontend *fe) + { + struct foo_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc, bit_error; + + /* Check if the BER measures are already available */ + rc = foo_read_u8(state, 0x54); + if (rc < 0) + return rc; + + if (!rc) + return 0; + + /* Read Bit Error Count */ + bit_error = foo_read_u32(state, 0x55); + if (bit_error < 0) + return bit_error; + + /* Read Total Bit Count */ + rc = foo_read_u32(state, 0x51); + if (rc < 0) + return rc; + + c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_error.stat[0].uvalue += bit_error; + c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_count.stat[0].uvalue += rc; + + return 0; + } + +If the driver doesn't provide a statistics available check bit +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +A few devices, however, may not provide a way to check if the stats are +available (or the way to check it is unknown). They may not even provide +a way to directly read the total number of bits or blocks. + +On those devices, the driver need to ensure that it won't be reading from +the register too often and/or estimate the total number of bits/blocks. + +On such drivers, a typical routine to get statistics would be like +(adapted from dib8000 driver's logic):: + + struct foo_state { + /* ... */ + + unsigned long per_jiffies_stats; + } + + static int foo_get_pre_ber(struct dvb_frontend *fe) + { + struct foo_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc, bit_error; + u64 bits; + + /* Check if time for stats was elapsed */ + if (!time_after(jiffies, state->per_jiffies_stats)) + return 0; + + /* Next stat should be collected in 1000 ms */ + state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000); + + /* Read Bit Error Count */ + bit_error = foo_read_u32(state, 0x55); + if (bit_error < 0) + return bit_error; + + /* + * On this particular frontend, there's no register that + * would provide the number of bits per 1000ms sample. So, + * some function would calculate it based on DTV properties + */ + bits = get_number_of_bits_per_1000ms(fe); + + c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_error.stat[0].uvalue += bit_error; + c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_count.stat[0].uvalue += bits; + + return 0; + } + +Please notice that, on both cases, we're getting the statistics using the +:c:type:`dvb_frontend_ops` ``.read_status`` callback. The rationale is that +the frontend core will automatically call this function periodically +(usually, 3 times per second, when the frontend is locked). + +That warrants that we won't miss to collect a counter and increment the +monotonic stats at the right time. + +Digital TV Frontend functions and types +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/media/dvb-core/dvb_frontend.h diff --git a/Documentation/media/kapi/dtv-net.rst b/Documentation/media/kapi/dtv-net.rst new file mode 100644 index 0000000000000000000000000000000000000000..ced991b73d699d265619d891738da3b7a5f7c5d4 --- /dev/null +++ b/Documentation/media/kapi/dtv-net.rst @@ -0,0 +1,4 @@ +Digital TV Network kABI +----------------------- + +.. kernel-doc:: drivers/media/dvb-core/dvb_net.h diff --git a/Documentation/media/kapi/v4l2-async.rst b/Documentation/media/kapi/v4l2-async.rst new file mode 100644 index 0000000000000000000000000000000000000000..523ff9eb09a065aa0fc39d2a8a5c27310664116f --- /dev/null +++ b/Documentation/media/kapi/v4l2-async.rst @@ -0,0 +1,3 @@ +V4L2 async kAPI +^^^^^^^^^^^^^^^ +.. kernel-doc:: include/media/v4l2-async.h diff --git a/Documentation/media/kapi/v4l2-core.rst b/Documentation/media/kapi/v4l2-core.rst index c7434f38fd9c7763aa92c5fc1e9ffaf7466f39b2..5cf292037a48a01924bffb791545d733a525fde8 100644 --- a/Documentation/media/kapi/v4l2-core.rst +++ b/Documentation/media/kapi/v4l2-core.rst @@ -19,6 +19,7 @@ Video4Linux devices v4l2-mc v4l2-mediabus v4l2-mem2mem + v4l2-async v4l2-fwnode v4l2-rect v4l2-tuner diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst index a5c821809cc6c9ad4e92b143b499681db1d9b1f4..b6fd86424fbba3f03f26cc33b746682af5fc2d30 100644 --- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst +++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst @@ -161,6 +161,24 @@ it is guaranteed that the state did change in between the two events. - Generated if the CEC pin goes from a low voltage to a high voltage. Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` capability set. + * .. _`CEC-EVENT-PIN-HPD-LOW`: + + - ``CEC_EVENT_PIN_HPD_LOW`` + - 5 + - Generated if the HPD pin goes from a high voltage to a low voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. When open() is called, the HPD pin can be read and + if the HPD is low, then an initial event will be generated for that + filehandle. + * .. _`CEC-EVENT-PIN-HPD-HIGH`: + + - ``CEC_EVENT_PIN_HPD_HIGH`` + - 6 + - Generated if the HPD pin goes from a low voltage to a high voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. When open() is called, the HPD pin can be read and + if the HPD is high, then an initial event will be generated for that + filehandle. .. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}| @@ -172,9 +190,9 @@ it is guaranteed that the state did change in between the two events. :stub-columns: 0 :widths: 3 1 8 - * .. _`CEC-EVENT-FL-INITIAL-VALUE`: + * .. _`CEC-EVENT-FL-INITIAL-STATE`: - - ``CEC_EVENT_FL_INITIAL_VALUE`` + - ``CEC_EVENT_FL_INITIAL_STATE`` - 1 - Set for the initial events that are generated when the device is opened. See the table above for which events do this. This allows diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst index 0f397c535a4cde648d5e2e132d25021457cb1418..bdad4b197bcd457196a83800246ae10f8087eb7e 100644 --- a/Documentation/media/uapi/cec/cec-ioc-receive.rst +++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst @@ -131,7 +131,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV'). - ``tx_status`` - The status bits of the transmitted message. See :ref:`cec-tx-status` for the possible status values. It is 0 if - this messages was received, not transmitted. + this message was received, not transmitted. * - __u8 - ``msg[16]`` - The message payload. For :ref:`ioctl CEC_TRANSMIT ` this is filled in by the @@ -168,7 +168,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV'). - ``tx_status`` - The status bits of the transmitted message. See :ref:`cec-tx-status` for the possible status values. It is 0 if - this messages was received, not transmitted. + this message was received, not transmitted. * - __u8 - ``tx_arb_lost_cnt`` - A counter of the number of transmit attempts that resulted in the @@ -256,9 +256,9 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV'). - ``CEC_TX_STATUS_ERROR`` - 0x10 - Some error occurred. This is used for any errors that do not fit - the previous two, either because the hardware could not tell which - error occurred, or because the hardware tested for other - conditions besides those two. + ``CEC_TX_STATUS_ARB_LOST`` or ``CEC_TX_STATUS_LOW_DRIVE``, either because + the hardware could not tell which error occurred, or because the hardware + tested for other conditions besides those two. * .. _`CEC-TX-STATUS-MAX-RETRIES`: - ``CEC_TX_STATUS_MAX_RETRIES`` diff --git a/Documentation/media/uapi/dvb/examples.rst b/Documentation/media/uapi/dvb/examples.rst index e0f627ca2e4dd73c3dfe4b3922749e763cda5d06..16dd90fa9e94eae3b1aae295171da99ee8d0f503 100644 --- a/Documentation/media/uapi/dvb/examples.rst +++ b/Documentation/media/uapi/dvb/examples.rst @@ -6,377 +6,11 @@ Examples ******** -In this section we would like to present some examples for using the Digital -TV API. +In the past, we used to have a set of examples here. However, those +examples got out of date and doesn't even compile nowadays. -.. note:: +Also, nowadays, the best is to use the libdvbv5 DVB API nowadays, +with is fully documented. - This section is out of date, and the code below won't even - compile. Please refer to the - `libdvbv5 `__ for - updated/recommended examples. - - -.. _tuning: - -Example: Tuning -=============== - -We will start with a generic tuning subroutine that uses the frontend -and SEC, as well as the demux devices. The example is given for QPSK -tuners, but can easily be adjusted for QAM. - - -.. code-block:: c - - #include - #include - #include - #include - #include - #include - #include - #include - - #include - #include - #include - #include - - #define DMX "/dev/dvb/adapter0/demux1" - #define FRONT "/dev/dvb/adapter0/frontend1" - #define SEC "/dev/dvb/adapter0/sec1" - - /* routine for checking if we have a signal and other status information*/ - int FEReadStatus(int fd, fe_status_t *stat) - { - int ans; - - if ( (ans = ioctl(fd,FE_READ_STATUS,stat) < 0)){ - perror("FE READ STATUS: "); - return -1; - } - - if (*stat & FE_HAS_POWER) - printf("FE HAS POWER\\n"); - - if (*stat & FE_HAS_SIGNAL) - printf("FE HAS SIGNAL\\n"); - - if (*stat & FE_SPECTRUM_INV) - printf("SPEKTRUM INV\\n"); - - return 0; - } - - - /* tune qpsk */ - /* freq: frequency of transponder */ - /* vpid, apid, tpid: PIDs of video, audio and teletext TS packets */ - /* diseqc: DiSEqC address of the used LNB */ - /* pol: Polarisation */ - /* srate: Symbol Rate */ - /* fec. FEC */ - /* lnb_lof1: local frequency of lower LNB band */ - /* lnb_lof2: local frequency of upper LNB band */ - /* lnb_slof: switch frequency of LNB */ - - int set_qpsk_channel(int freq, int vpid, int apid, int tpid, - int diseqc, int pol, int srate, int fec, int lnb_lof1, - int lnb_lof2, int lnb_slof) - { - struct secCommand scmd; - struct secCmdSequence scmds; - struct dmx_pes_filter_params pesFilterParams; - FrontendParameters frp; - struct pollfd pfd[1]; - FrontendEvent event; - int demux1, demux2, demux3, front; - - frequency = (uint32_t) freq; - symbolrate = (uint32_t) srate; - - if((front = open(FRONT,O_RDWR)) < 0){ - perror("FRONTEND DEVICE: "); - return -1; - } - - if((sec = open(SEC,O_RDWR)) < 0){ - perror("SEC DEVICE: "); - return -1; - } - - if (demux1 < 0){ - if ((demux1=open(DMX, O_RDWR|O_NONBLOCK)) - < 0){ - perror("DEMUX DEVICE: "); - return -1; - } - } - - if (demux2 < 0){ - if ((demux2=open(DMX, O_RDWR|O_NONBLOCK)) - < 0){ - perror("DEMUX DEVICE: "); - return -1; - } - } - - if (demux3 < 0){ - if ((demux3=open(DMX, O_RDWR|O_NONBLOCK)) - < 0){ - perror("DEMUX DEVICE: "); - return -1; - } - } - - if (freq < lnb_slof) { - frp.Frequency = (freq - lnb_lof1); - scmds.continuousTone = SEC_TONE_OFF; - } else { - frp.Frequency = (freq - lnb_lof2); - scmds.continuousTone = SEC_TONE_ON; - } - frp.Inversion = INVERSION_AUTO; - if (pol) scmds.voltage = SEC_VOLTAGE_18; - else scmds.voltage = SEC_VOLTAGE_13; - - scmd.type=0; - scmd.u.diseqc.addr=0x10; - scmd.u.diseqc.cmd=0x38; - scmd.u.diseqc.numParams=1; - scmd.u.diseqc.params[0] = 0xF0 | ((diseqc * 4) & 0x0F) | - (scmds.continuousTone == SEC_TONE_ON ? 1 : 0) | - (scmds.voltage==SEC_VOLTAGE_18 ? 2 : 0); - - scmds.miniCommand=SEC_MINI_NONE; - scmds.numCommands=1; - scmds.commands=&scmd; - if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){ - perror("SEC SEND: "); - return -1; - } - - if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){ - perror("SEC SEND: "); - return -1; - } - - frp.u.qpsk.SymbolRate = srate; - frp.u.qpsk.FEC_inner = fec; - - if (ioctl(front, FE_SET_FRONTEND, &frp) < 0){ - perror("QPSK TUNE: "); - return -1; - } - - pfd[0].fd = front; - pfd[0].events = POLLIN; - - if (poll(pfd,1,3000)){ - if (pfd[0].revents & POLLIN){ - printf("Getting QPSK event\\n"); - if ( ioctl(front, FE_GET_EVENT, &event) - - == -EOVERFLOW){ - perror("qpsk get event"); - return -1; - } - printf("Received "); - switch(event.type){ - case FE_UNEXPECTED_EV: - printf("unexpected event\\n"); - return -1; - case FE_FAILURE_EV: - printf("failure event\\n"); - return -1; - - case FE_COMPLETION_EV: - printf("completion event\\n"); - } - } - } - - - pesFilterParams.pid = vpid; - pesFilterParams.input = DMX_IN_FRONTEND; - pesFilterParams.output = DMX_OUT_DECODER; - pesFilterParams.pes_type = DMX_PES_VIDEO; - pesFilterParams.flags = DMX_IMMEDIATE_START; - if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ - perror("set_vpid"); - return -1; - } - - pesFilterParams.pid = apid; - pesFilterParams.input = DMX_IN_FRONTEND; - pesFilterParams.output = DMX_OUT_DECODER; - pesFilterParams.pes_type = DMX_PES_AUDIO; - pesFilterParams.flags = DMX_IMMEDIATE_START; - if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ - perror("set_apid"); - return -1; - } - - pesFilterParams.pid = tpid; - pesFilterParams.input = DMX_IN_FRONTEND; - pesFilterParams.output = DMX_OUT_DECODER; - pesFilterParams.pes_type = DMX_PES_TELETEXT; - pesFilterParams.flags = DMX_IMMEDIATE_START; - if (ioctl(demux3, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ - perror("set_tpid"); - return -1; - } - - return has_signal(fds); - } - -The program assumes that you are using a universal LNB and a standard -DiSEqC switch with up to 4 addresses. Of course, you could build in some -more checking if tuning was successful and maybe try to repeat the -tuning process. Depending on the external hardware, i.e. LNB and DiSEqC -switch, and weather conditions this may be necessary. - - -.. _the_dvr_device: - -Example: The DVR device -======================== - -The following program code shows how to use the DVR device for -recording. - - -.. code-block:: c - - #include - #include - #include - #include - #include - #include - #include - #include - - #include - #include - #include - #define DVR "/dev/dvb/adapter0/dvr1" - #define AUDIO "/dev/dvb/adapter0/audio1" - #define VIDEO "/dev/dvb/adapter0/video1" - - #define BUFFY (188*20) - #define MAX_LENGTH (1024*1024*5) /* record 5MB */ - - - /* switch the demuxes to recording, assuming the transponder is tuned */ - - /* demux1, demux2: file descriptor of video and audio filters */ - /* vpid, apid: PIDs of video and audio channels */ - - int switch_to_record(int demux1, int demux2, uint16_t vpid, uint16_t apid) - { - struct dmx_pes_filter_params pesFilterParams; - - if (demux1 < 0){ - if ((demux1=open(DMX, O_RDWR|O_NONBLOCK)) - < 0){ - perror("DEMUX DEVICE: "); - return -1; - } - } - - if (demux2 < 0){ - if ((demux2=open(DMX, O_RDWR|O_NONBLOCK)) - < 0){ - perror("DEMUX DEVICE: "); - return -1; - } - } - - pesFilterParams.pid = vpid; - pesFilterParams.input = DMX_IN_FRONTEND; - pesFilterParams.output = DMX_OUT_TS_TAP; - pesFilterParams.pes_type = DMX_PES_VIDEO; - pesFilterParams.flags = DMX_IMMEDIATE_START; - if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ - perror("DEMUX DEVICE"); - return -1; - } - pesFilterParams.pid = apid; - pesFilterParams.input = DMX_IN_FRONTEND; - pesFilterParams.output = DMX_OUT_TS_TAP; - pesFilterParams.pes_type = DMX_PES_AUDIO; - pesFilterParams.flags = DMX_IMMEDIATE_START; - if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ - perror("DEMUX DEVICE"); - return -1; - } - return 0; - } - - /* start recording MAX_LENGTH , assuming the transponder is tuned */ - - /* demux1, demux2: file descriptor of video and audio filters */ - /* vpid, apid: PIDs of video and audio channels */ - int record_dvr(int demux1, int demux2, uint16_t vpid, uint16_t apid) - { - int i; - int len; - int written; - uint8_t buf[BUFFY]; - uint64_t length; - struct pollfd pfd[1]; - int dvr, dvr_out; - - /* open dvr device */ - if ((dvr = open(DVR, O_RDONLY|O_NONBLOCK)) < 0){ - perror("DVR DEVICE"); - return -1; - } - - /* switch video and audio demuxes to dvr */ - printf ("Switching dvr on\\n"); - i = switch_to_record(demux1, demux2, vpid, apid); - printf("finished: "); - - printf("Recording %2.0f MB of test file in TS format\\n", - MAX_LENGTH/(1024.0*1024.0)); - length = 0; - - /* open output file */ - if ((dvr_out = open(DVR_FILE,O_WRONLY|O_CREAT - |O_TRUNC, S_IRUSR|S_IWUSR - |S_IRGRP|S_IWGRP|S_IROTH| - S_IWOTH)) < 0){ - perror("Can't open file for dvr test"); - return -1; - } - - pfd[0].fd = dvr; - pfd[0].events = POLLIN; - - /* poll for dvr data and write to file */ - while (length < MAX_LENGTH ) { - if (poll(pfd,1,1)){ - if (pfd[0].revents & POLLIN){ - len = read(dvr, buf, BUFFY); - if (len < 0){ - perror("recording"); - return -1; - } - if (len > 0){ - written = 0; - while (written < len) - written += - write (dvr_out, - buf, len); - length += len; - printf("written %2.0f MB\\r", - length/1024./1024.); - } - } - } - } - return 0; - } +Please refer to the `libdvbv5 `__ +for updated/recommended examples. diff --git a/Documentation/media/uapi/dvb/fe-get-property.rst b/Documentation/media/uapi/dvb/fe-get-property.rst index 948d2ba84f2ce0991231f90f2529979802cbc974..b69741d9cedfc30adaa9af94aaaed01adfddcc41 100644 --- a/Documentation/media/uapi/dvb/fe-get-property.rst +++ b/Documentation/media/uapi/dvb/fe-get-property.rst @@ -48,8 +48,11 @@ depends on the delivery system and on the device: - This call requires read/write access to the device. - - At return, the values are updated to reflect the actual parameters - used. +.. note:: + + At return, the values aren't updated to reflect the actual + parameters used. If the actual parameters are needed, an explicit + call to ``FE_GET_PROPERTY`` is needed. - ``FE_GET_PROPERTY:`` diff --git a/Documentation/media/uapi/dvb/net-types.rst b/Documentation/media/uapi/dvb/net-types.rst index e1177bdcd623be66c8951337be9eacf9040947ad..8fa3292eaa42596d45280d187ea3e9ded4508e25 100644 --- a/Documentation/media/uapi/dvb/net-types.rst +++ b/Documentation/media/uapi/dvb/net-types.rst @@ -1,6 +1,6 @@ .. -*- coding: utf-8; mode: rst -*- -.. _dmx_types: +.. _net_types: ************** Net Data Types diff --git a/Documentation/networking/dsa/lan9303.txt b/Documentation/networking/dsa/lan9303.txt new file mode 100644 index 0000000000000000000000000000000000000000..144b02b95207eeac5590f949447e9f8b5812edf5 --- /dev/null +++ b/Documentation/networking/dsa/lan9303.txt @@ -0,0 +1,37 @@ +LAN9303 Ethernet switch driver +============================== + +The LAN9303 is a three port 10/100 Mbps ethernet switch with integrated phys for +the two external ethernet ports. The third port is an RMII/MII interface to a +host master network interface (e.g. fixed link). + + +Driver details +============== + +The driver is implemented as a DSA driver, see +Documentation/networking/dsa/dsa.txt. + +See Documentation/devicetree/bindings/net/dsa/lan9303.txt for device tree +binding. + +The LAN9303 can be managed both via MDIO and I2C, both supported by this driver. + +At startup the driver configures the device to provide two separate network +interfaces (which is the default state of a DSA device). Due to HW limitations, +no HW MAC learning takes place in this mode. + +When both user ports are joined to the same bridge, the normal HW MAC learning +is enabled. This means that unicast traffic is forwarded in HW. Broadcast and +multicast is flooded in HW. STP is also supported in this mode. The driver +support fdb/mdb operations as well, meaning IGMP snooping is supported. + +If one of the user ports leave the bridge, the ports goes back to the initial +separated operation. + + +Driver limitations +================== + + - Support for VLAN filtering is not implemented + - The HW does not support VLAN-specific fdb entries diff --git a/Documentation/networking/gtp.txt b/Documentation/networking/gtp.txt index 93e96750f1034bfc3cb804a78033ad9836dc5d89..0d9c18f05ec61d8d6abe4745e15477230e46cbb4 100644 --- a/Documentation/networking/gtp.txt +++ b/Documentation/networking/gtp.txt @@ -1,6 +1,7 @@ The Linux kernel GTP tunneling module ====================================================================== -Documentation by Harald Welte +Documentation by Harald Welte and + Andreas Schultz In 'drivers/net/gtp.c' you are finding a kernel-level implementation of a GTP tunnel endpoint. @@ -91,9 +92,13 @@ http://git.osmocom.org/libgtpnl/ == Protocol Versions == -There are two different versions of GTP-U: v0 and v1. Both are -implemented in the Kernel GTP module. Version 0 is a legacy version, -and deprecated from recent 3GPP specifications. +There are two different versions of GTP-U: v0 [GSM TS 09.60] and v1 +[3GPP TS 29.281]. Both are implemented in the Kernel GTP module. +Version 0 is a legacy version, and deprecated from recent 3GPP +specifications. + +GTP-U uses UDP for transporting PDUs. The receiving UDP port is 2151 +for GTPv1-U and 3386 for GTPv0-U. There are three versions of GTP-C: v0, v1, and v2. As the kernel doesn't implement GTP-C, we don't have to worry about this. It's the @@ -133,3 +138,93 @@ doe to a lack of user interest, it never got merged. In 2015, Andreas Schultz came to the rescue and fixed lots more bugs, extended it with new features and finally pushed all of us to get it mainline, where it was merged in 4.7.0. + +== Architectural Details == + +=== Local GTP-U entity and tunnel identification === + +GTP-U uses UDP for transporting PDU's. The receiving UDP port is 2152 +for GTPv1-U and 3386 for GTPv0-U. + +There is only one GTP-U entity (and therefor SGSN/GGSN/S-GW/PDN-GW +instance) per IP address. Tunnel Endpoint Identifier (TEID) are unique +per GTP-U entity. + +A specific tunnel is only defined by the destination entity. Since the +destination port is constant, only the destination IP and TEID define +a tunnel. The source IP and Port have no meaning for the tunnel. + +Therefore: + + * when sending, the remote entity is defined by the remote IP and + the tunnel endpoint id. The source IP and port have no meaning and + can be changed at any time. + + * when receiving the local entity is defined by the local + destination IP and the tunnel endpoint id. The source IP and port + have no meaning and can change at any time. + +[3GPP TS 29.281] Section 4.3.0 defines this so: + +> The TEID in the GTP-U header is used to de-multiplex traffic +> incoming from remote tunnel endpoints so that it is delivered to the +> User plane entities in a way that allows multiplexing of different +> users, different packet protocols and different QoS levels. +> Therefore no two remote GTP-U endpoints shall send traffic to a +> GTP-U protocol entity using the same TEID value except +> for data forwarding as part of mobility procedures. + +The definition above only defines that two remote GTP-U endpoints +*should not* send to the same TEID, it *does not* forbid or exclude +such a scenario. In fact, the mentioned mobility procedures make it +necessary that the GTP-U entity accepts traffic for TEIDs from +multiple or unknown peers. + +Therefore, the receiving side identifies tunnels exclusively based on +TEIDs, not based on the source IP! + +== APN vs. Network Device == + +The GTP-U driver creates a Linux network device for each Gi/SGi +interface. + +[3GPP TS 29.281] calls the Gi/SGi reference point an interface. This +may lead to the impression that the GGSN/P-GW can have only one such +interface. + +Correct is that the Gi/SGi reference point defines the interworking +between +the 3GPP packet domain (PDN) based on GTP-U tunnel and IP +based networks. + +There is no provision in any of the 3GPP documents that limits the +number of Gi/SGi interfaces implemented by a GGSN/P-GW. + +[3GPP TS 29.061] Section 11.3 makes it clear that the selection of a +specific Gi/SGi interfaces is made through the Access Point Name +(APN): + +> 2. each private network manages its own addressing. In general this +> will result in different private networks having overlapping +> address ranges. A logically separate connection (e.g. an IP in IP +> tunnel or layer 2 virtual circuit) is used between the GGSN/P-GW +> and each private network. +> +> In this case the IP address alone is not necessarily unique. The +> pair of values, Access Point Name (APN) and IPv4 address and/or +> IPv6 prefixes, is unique. + +In order to support the overlapping address range use case, each APN +is mapped to a separate Gi/SGi interface (network device). + +NOTE: The Access Point Name is purely a control plane (GTP-C) concept. +At the GTP-U level, only Tunnel Endpoint Identifiers are present in +GTP-U packets and network devices are known + +Therefore for a given UE the mapping in IP to PDN network is: + * network device + MS IP -> Peer IP + Peer TEID, + +and from PDN to IP network: + * local GTP-U IP + TEID -> network device + +Furthermore, before a received T-PDU is injected into the network +device the MS IP is checked against the IP recorded in PDP context. diff --git a/Documentation/networking/ila.txt b/Documentation/networking/ila.txt new file mode 100644 index 0000000000000000000000000000000000000000..78df879abd263cbb907a03f36b809d0b5cd567c5 --- /dev/null +++ b/Documentation/networking/ila.txt @@ -0,0 +1,285 @@ +Identifier Locator Addressing (ILA) + + +Introduction +============ + +Identifier-locator addressing (ILA) is a technique used with IPv6 that +differentiates between location and identity of a network node. Part of an +address expresses the immutable identity of the node, and another part +indicates the location of the node which can be dynamic. Identifier-locator +addressing can be used to efficiently implement overlay networks for +network virtualization as well as solutions for use cases in mobility. + +ILA can be thought of as means to implement an overlay network without +encapsulation. This is accomplished by performing network address +translation on destination addresses as a packet traverses a network. To +the network, an ILA translated packet appears to be no different than any +other IPv6 packet. For instance, if the transport protocol is TCP then an +ILA translated packet looks like just another TCP/IPv6 packet. The +advantage of this is that ILA is transparent to the network so that +optimizations in the network, such as ECMP, RSS, GRO, GSO, etc., just work. + +The ILA protocol is described in Internet-Draft draft-herbert-intarea-ila. + + +ILA terminology +=============== + + - Identifier A number that identifies an addressable node in the network + independent of its location. ILA identifiers are sixty-four + bit values. + + - Locator A network prefix that routes to a physical host. Locators + provide the topological location of an addressed node. ILA + locators are sixty-four bit prefixes. + + - ILA mapping + A mapping of an ILA identifier to a locator (or to a + locator and meta data). An ILA domain maintains a database + that contains mappings for all destinations in the domain. + + - SIR address + An IPv6 address composed of a SIR prefix (upper sixty- + four bits) and an identifier (lower sixty-four bits). + SIR addresses are visible to applications and provide a + means for them to address nodes independent of their + location. + + - ILA address + An IPv6 address composed of a locator (upper sixty-four + bits) and an identifier (low order sixty-four bits). ILA + addresses are never visible to an application. + + - ILA host An end host that is capable of performing ILA translations + on transmit or receive. + + - ILA router A network node that performs ILA translation and forwarding + of translated packets. + + - ILA forwarding cache + A type of ILA router that only maintains a working set + cache of mappings. + + - ILA node A network node capable of performing ILA translations. This + can be an ILA router, ILA forwarding cache, or ILA host. + + +Operation +========= + +There are two fundamental operations with ILA: + + - Translate a SIR address to an ILA address. This is performed on ingress + to an ILA overlay. + + - Translate an ILA address to a SIR address. This is performed on egress + from the ILA overlay. + +ILA can be deployed either on end hosts or intermediate devices in the +network; these are provided by "ILA hosts" and "ILA routers" respectively. +Configuration and datapath for these two points of deployment is somewhat +different. + +The diagram below illustrates the flow of packets through ILA as well +as showing ILA hosts and routers. + + +--------+ +--------+ + | Host A +-+ +--->| Host B | + | | | (2) ILA (') | | + +--------+ | ...addressed.... ( ) +--------+ + V +---+--+ . packet . +---+--+ (_) + (1) SIR | | ILA |----->-------->---->| ILA | | (3) SIR + addressed +->|router| . . |router|->-+ addressed + packet +---+--+ . IPv6 . +---+--+ packet + / . Network . + / . . +--+-++--------+ + +--------+ / . . |ILA || Host | + | Host +--+ . .- -|host|| | + | | . . +--+-++--------+ + +--------+ ................ + + +Transport checksum handling +=========================== + +When an address is translated by ILA, an encapsulated transport checksum +that includes the translated address in a pseudo header may be rendered +incorrect on the wire. This is a problem for intermediate devices, +including checksum offload in NICs, that process the checksum. There are +three options to deal with this: + +- no action Allow the checksum to be incorrect on the wire. Before + a receiver verifies a checksum the ILA to SIR address + translation must be done. + +- adjust transport checksum + When ILA translation is performed the packet is parsed + and if a transport layer checksum is found then it is + adjusted to reflect the correct checksum per the + translated address. + +- checksum neutral mapping + When an address is translated the difference can be offset + elsewhere in a part of the packet that is covered by the + the checksum. The low order sixteen bits of the identifier + are used. This method is preferred since it doesn't require + parsing a packet beyond the IP header and in most cases the + adjustment can be precomputed and saved with the mapping. + +Note that the checksum neutral adjustment affects the low order sixteen +bits of the identifier. When ILA to SIR address translation is done on +egress the low order bits are restored to the original value which +restores the identifier as it was originally sent. + + +Identifier types +================ + +ILA defines different types of identifiers for different use cases. + +The defined types are: + + 0: interface identifier + + 1: locally unique identifier + + 2: virtual networking identifier for IPv4 address + + 3: virtual networking identifier for IPv6 unicast address + + 4: virtual networking identifier for IPv6 multicast address + + 5: non-local address identifier + +In the current implementation of kernel ILA only locally unique identifiers +(LUID) are supported. LUID allows for a generic, unformatted 64 bit +identifier. + + +Identifier formats +================== + +Kernel ILA supports two optional fields in an identifier for formatting: +"C-bit" and "identifier type". The presence of these fields is determined +by configuration as demonstrated below. + +If the identifier type is present it occupies the three highest order +bits of an identifier. The possible values are given in the above list. + +If the C-bit is present, this is used as an indication that checksum +neutral mapping has been done. The C-bit can only be set in an +ILA address, never a SIR address. + +In the simplest format the identifier types, C-bit, and checksum +adjustment value are not present so an identifier is considered an +unstructured sixty-four bit value. + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Identifier | + + + + | | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + +The checksum neutral adjustment may be configured to always be +present using neutral-map-auto. In this case there is no C-bit, but the +checksum adjustment is in the low order 16 bits. The identifier is +still sixty-four bits. + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Identifier | + | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | Checksum-neutral adjustment | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + +The C-bit may used to explicitly indicate that checksum neutral +mapping has been applied to an ILA address. The format is: + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | |C| Identifier | + | +-+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | Checksum-neutral adjustment | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + +The identifier type field may be present to indicate the identifier +type. If it is not present then the type is inferred based on mapping +configuration. The checksum neutral adjustment may automatically +used with the identifier type as illustrated below. + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Type| Identifier | + +-+-+-+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | Checksum-neutral adjustment | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + +If the identifier type and the C-bit can be present simultaneously so +the identifier format would be: + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Type|C| Identifier | + +-+-+-+-+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | Checksum-neutral adjustment | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + +Configuration +============= + +There are two methods to configure ILA mappings. One is by using LWT routes +and the other is ila_xlat (called from NFHOOK PREROUTING hook). ila_xlat +is intended to be used in the receive path for ILA hosts . + +An ILA router has also been implemented in XDP. Description of that is +outside the scope of this document. + +The usage of for ILA LWT routes is: + +ip route add DEST/128 encap ila LOC csum-mode MODE ident-type TYPE via ADDR + +Destination (DEST) can either be a SIR address (for an ILA host or ingress +ILA router) or an ILA address (egress ILA router). LOC is the sixty-four +bit locator (with format W:X:Y:Z) that overwrites the upper sixty-four +bits of the destination address. Checksum MODE is one of "no-action", +"adj-transport", "neutral-map", and "neutral-map-auto". If neutral-map is +set then the C-bit will be present. Identifier TYPE one of "luid" or +"use-format." In the case of use-format, the identifier type field is +present and the effective type is taken from that. + +The usage of ila_xlat is: + +ip ila add loc_match MATCH loc LOC csum-mode MODE ident-type TYPE + +MATCH indicates the incoming locator that must be matched to apply +a the translaiton. LOC is the locator that overwrites the upper +sixty-four bits of the destination address. MODE and TYPE have the +same meanings as described above. + + +Some examples +============= + +# Configure an ILA route that uses checksum neutral mapping as well +# as type field. Note that the type field is set in the SIR address +# (the 2000 implies type is 1 which is LUID). +ip route add 3333:0:0:1:2000:0:1:87/128 encap ila 2001:0:87:0 \ + csum-mode neutral-map ident-type use-format + +# Configure an ILA LWT route that uses auto checksum neutral mapping +# (no C-bit) and configure identifier type to be LUID so that the +# identifier type field will not be present. +ip route add 3333:0:0:1:2000:0:2:87/128 encap ila 2001:0:87:1 \ + csum-mode neutral-map-auto ident-type luid + +ila_xlat configuration + +# Configure an ILA to SIR mapping that matches a locator and overwrites +# it with a SIR address (3333:0:0:1 in this example). The C-bit and +# identifier field are used. +ip ila add loc_match 2001:0:119:0 loc 3333:0:0:1 \ + csum-mode neutral-map-auto ident-type use-format + +# Configure an ILA to SIR mapping where checksum neutral is automatically +# set without the C-bit and the identifier type is configured to be LUID +# so that the identifier type field is not present. +ip ila add loc_match 2001:0:119:0 loc 3333:0:0:1 \ + csum-mode neutral-map-auto ident-type use-format diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 77f4de59dc9ceb3cdb36692d1ea41e1d861468b0..46c7e1085efcccc178a644917e5e80fa736781fd 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -289,8 +289,7 @@ tcp_ecn_fallback - BOOLEAN Default: 1 (fallback enabled) tcp_fack - BOOLEAN - Enable FACK congestion avoidance and fast retransmission. - The value is not used, if tcp_sack is not enabled. + This is a legacy option, it has no effect anymore. tcp_fin_timeout - INTEGER The length of time an orphaned (no longer referenced by any @@ -454,6 +453,7 @@ tcp_recovery - INTEGER RACK: 0x1 enables the RACK loss detection for fast detection of lost retransmissions and tail drops. + RACK: 0x2 makes RACK's reordering window static (min_rtt/4). Default: 0x1 @@ -1385,6 +1385,30 @@ mld_qrv - INTEGER Default: 2 (as specified by RFC3810 9.1) Minimum: 1 (as specified by RFC6636 4.5) +max_dst_opts_cnt - INTEGER + Maximum number of non-padding TLVs allowed in a Destination + options extension header. If this value is less than zero + then unknown options are disallowed and the number of known + TLVs allowed is the absolute value of this number. + Default: 8 + +max_hbh_opts_cnt - INTEGER + Maximum number of non-padding TLVs allowed in a Hop-by-Hop + options extension header. If this value is less than zero + then unknown options are disallowed and the number of known + TLVs allowed is the absolute value of this number. + Default: 8 + +max dst_opts_len - INTEGER + Maximum length allowed for a Destination options extension + header. + Default: INT_MAX (unlimited) + +max hbh_opts_len - INTEGER + Maximum length allowed for a Hop-by-Hop options extension + header. + Default: INT_MAX (unlimited) + IPv6 Fragmentation: ip6frag_high_thresh - INTEGER @@ -1707,6 +1731,15 @@ ndisc_notify - BOOLEAN 1 - Generate unsolicited neighbour advertisements when device is brought up or hardware address changes. +ndisc_tclass - INTEGER + The IPv6 Traffic Class to use by default when sending IPv6 Neighbor + Discovery (Router Solicitation, Router Advertisement, Neighbor + Solicitation, Neighbor Advertisement, Redirect) messages. + These 8 bits can be interpreted as 6 high order bits holding the DSCP + value and 2 low order bits representing ECN (which you probably want + to leave cleared). + 0 - (default) + mldv1_unsolicited_report_interval - INTEGER The interval in milliseconds in which the next unsolicited MLDv1 report retransmit will take place. diff --git a/Documentation/networking/ipvlan.txt b/Documentation/networking/ipvlan.txt index 1fe42a874aae02bec8c8c784389ea48033418c9a..812ef003e0a8614c45476dddd2f6209ea387f5af 100644 --- a/Documentation/networking/ipvlan.txt +++ b/Documentation/networking/ipvlan.txt @@ -22,9 +22,21 @@ The driver can be built into the kernel (CONFIG_IPVLAN=y) or as a module There are no module parameters for this driver and it can be configured using IProute2/ip utility. - ip link add link name type ipvlan mode { l2 | l3 | l3s } - - e.g. ip link add link eth0 name ipvl0 type ipvlan mode l2 + ip link add link name type ipvlan [ mode MODE ] [ FLAGS ] + where + MODE: l3 (default) | l3s | l2 + FLAGS: bridge (default) | private | vepa + + e.g. + (a) Following will create IPvlan link with eth0 as master in + L3 bridge mode + bash# ip link add link eth0 name ipvl0 type ipvlan + (b) This command will create IPvlan link in L2 bridge mode. + bash# ip link add link eth0 name ipvl0 type ipvlan mode l2 bridge + (c) This command will create an IPvlan device in L2 private mode. + bash# ip link add link eth0 name ipvlan type ipvlan mode l2 private + (d) This command will create an IPvlan device in L2 vepa mode. + bash# ip link add link eth0 name ipvlan type ipvlan mode l2 vepa 4. Operating modes: @@ -54,7 +66,29 @@ works in this mode and hence it is L3-symmetric (L3s). This will have slightly l performance but that shouldn't matter since you are choosing this mode over plain-L3 mode to make conn-tracking work. -5. What to choose (macvlan vs. ipvlan)? +5. Mode flags: + At this time following mode flags are available + +5.1 bridge: + This is the default option. To configure the IPvlan port in this mode, +user can choose to either add this option on the command-line or don't specify +anything. This is the traditional mode where slaves can cross-talk among +themseleves apart from talking through the master device. + +5.2 private: + If this option is added to the command-line, the port is set in private +mode. i.e. port wont allow cross communication between slaves. + +5.3 vepa: + If this is added to the command-line, the port is set in VEPA mode. +i.e. port will offload switching functionality to the external entity as +described in 802.1Qbg +Note: VEPA mode in IPvlan has limitations. IPvlan uses the mac-address of the +master-device, so the packets which are emitted in this mode for the adjacent +neighbor will have source and destination mac same. This will make the switch / +router send the redirect message. + +6. What to choose (macvlan vs. ipvlan)? These two devices are very similar in many regards and the specific use case could very well define which device to choose. if one of the following situations defines your use case then you can choose to use ipvlan - diff --git a/Documentation/networking/netdev-FAQ.txt b/Documentation/networking/netdev-FAQ.txt index cfc66ea72329ba4d953da900bec39e3c0c19d70a..2a3278d5cf35370aa6fb3679b0109a71365a9c62 100644 --- a/Documentation/networking/netdev-FAQ.txt +++ b/Documentation/networking/netdev-FAQ.txt @@ -64,7 +64,10 @@ A: To understand this, you need to know a bit of background information If you aren't subscribed to netdev and/or are simply unsure if net-next has re-opened yet, simply check the net-next git repository link above for - any new networking-related commits. + any new networking-related commits. You may also check the following + website for the current status: + + http://vger.kernel.org/~davem/net-next.html The "net" tree continues to collect fixes for the vX.Y content, and is fed back to Linus at regular (~weekly) intervals. Meaning that the diff --git a/Documentation/networking/netvsc.txt b/Documentation/networking/netvsc.txt index 93560fb1170a6cb77b7882a3105323dc0d7341b4..92f5b31392fac508f4a465b64de130de4ab1f4ee 100644 --- a/Documentation/networking/netvsc.txt +++ b/Documentation/networking/netvsc.txt @@ -19,12 +19,12 @@ Features Receive Side Scaling -------------------- - Hyper-V supports receive side scaling. For TCP, packets are - distributed among available queues based on IP address and port + Hyper-V supports receive side scaling. For TCP & UDP, packets can + be distributed among available queues based on IP address and port number. - For UDP, we can switch UDP hash level between L3 and L4 by ethtool - command. UDP over IPv4 and v6 can be set differently. The default + For TCP & UDP, we can switch hash level between L3 and L4 by ethtool + command. TCP/UDP over IPv4 and v6 can be set differently. The default hash level is L4. We currently only allow switching TX hash level from within the guests. diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt index 7818b5fe448b60dae421e391ec4679b1c1f18c79..381e5b23d61d8858dd451ad9d13c8c4ee29284b3 100644 --- a/Documentation/networking/regulatory.txt +++ b/Documentation/networking/regulatory.txt @@ -19,6 +19,14 @@ core regulatory domain all wireless devices should adhere to. How to get regulatory domains to the kernel ------------------------------------------- +When the regulatory domain is first set up, the kernel will request a +database file (regulatory.db) containing all the regulatory rules. It +will then use that database when it needs to look up the rules for a +given country. + +How to get regulatory domains to the kernel (old CRDA solution) +--------------------------------------------------------------- + Userspace gets a regulatory domain in the kernel by having a userspace agent build it and send it via nl80211. Only expected regulatory domains will be respected by the kernel. @@ -192,23 +200,5 @@ Then in some part of your code after your wiphy has been registered: Statically compiled regulatory database --------------------------------------- -In most situations the userland solution using CRDA as described -above is the preferred solution. However in some cases a set of -rules built into the kernel itself may be desirable. To account -for this situation, a configuration option has been provided -(i.e. CONFIG_CFG80211_INTERNAL_REGDB). With this option enabled, -the wireless database information contained in net/wireless/db.txt is -used to generate a data structure encoded in net/wireless/regdb.c. -That option also enables code in net/wireless/reg.c which queries -the data in regdb.c as an alternative to using CRDA. - -The file net/wireless/db.txt should be kept up-to-date with the db.txt -file available in the git repository here: - - git://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git - -Again, most users in most situations should be using the CRDA package -provided with their distribution, and in most other situations users -should be building and using CRDA on their own rather than using -this option. If you are not absolutely sure that you should be using -CONFIG_CFG80211_INTERNAL_REGDB then _DO_NOT_USE_IT_. +When a database should be fixed into the kernel, it can be provided as a +firmware file at build time that is then linked into the kernel. diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index 810620153a44c0296f40dcffcb0196e571dc2a60..b5407163d53bea922c58af999aeb4c49b17ed266 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -280,6 +280,18 @@ Interaction with the user of the RxRPC socket: nominated by a socket option. +Notes on sendmsg: + + (*) MSG_WAITALL can be set to tell sendmsg to ignore signals if the peer is + making progress at accepting packets within a reasonable time such that we + manage to queue up all the data for transmission. This requires the + client to accept at least one packet per 2*RTT time period. + + If this isn't set, sendmsg() will return immediately, either returning + EINTR/ERESTARTSYS if nothing was consumed or returning the amount of data + consumed. + + Notes on recvmsg: (*) If there's a sequence of data messages belonging to a particular call on @@ -782,7 +794,9 @@ The kernel interface functions are as follows: struct key *key, unsigned long user_call_ID, s64 tx_total_len, - gfp_t gfp); + gfp_t gfp, + rxrpc_notify_rx_t notify_rx, + bool upgrade); This allocates the infrastructure to make a new RxRPC call and assigns call and connection numbers. The call will be made on the UDP port that @@ -803,6 +817,13 @@ The kernel interface functions are as follows: allows the kernel to encrypt directly to the packet buffers, thereby saving a copy. The value may not be less than -1. + notify_rx is a pointer to a function to be called when events such as + incoming data packets or remote aborts happen. + + upgrade should be set to true if a client operation should request that + the server upgrade the service to a better one. The resultant service ID + is returned by rxrpc_kernel_recv_data(). + If this function is successful, an opaque reference to the RxRPC call is returned. The caller now holds a reference on this and it must be properly ended. @@ -850,7 +871,8 @@ The kernel interface functions are as follows: size_t size, size_t *_offset, bool want_more, - u32 *_abort) + u32 *_abort, + u16 *_service) This is used to receive data from either the reply part of a client call or the request part of a service call. buf and size specify how much @@ -873,6 +895,9 @@ The kernel interface functions are as follows: If a remote ABORT is detected, the abort code received will be stored in *_abort and ECONNABORTED will be returned. + The service ID that the call ended up with is returned into *_service. + This can be used to see if a call got a service upgrade. + (*) Abort a call. void rxrpc_kernel_abort_call(struct socket *sock, @@ -1020,6 +1045,30 @@ The kernel interface functions are as follows: It returns 0 if the call was requeued and an error otherwise. + (*) Get call RTT. + + u64 rxrpc_kernel_get_rtt(struct socket *sock, struct rxrpc_call *call); + + Get the RTT time to the peer in use by a call. The value returned is in + nanoseconds. + + (*) Check call still alive. + + u32 rxrpc_kernel_check_life(struct socket *sock, + struct rxrpc_call *call); + + This returns a number that is updated when ACKs are received from the peer + (notably including PING RESPONSE ACKs which we can elicit by sending PING + ACKs to see if the call still exists on the server). The caller should + compare the numbers of two calls to see if the call is still alive after + waiting for a suitable interval. + + This allows the caller to work out if the server is still contactable and + if the call is still alive on the server whilst waiting for the server to + process a client operation. + + This function may transmit a PING ACK. + ======================= CONFIGURABLE PARAMETERS diff --git a/Documentation/networking/vrf.txt b/Documentation/networking/vrf.txt index 3918dae964d4960ccb8b32a566bedd16a999ce68..8ff7b4c8f91bc45da4f4c50792e0dc5587b62875 100644 --- a/Documentation/networking/vrf.txt +++ b/Documentation/networking/vrf.txt @@ -71,7 +71,12 @@ Setup ip ru add iif vrf-blue table 10 3. Set the default route for the table (and hence default route for the VRF). - ip route add table 10 unreachable default + ip route add table 10 unreachable default metric 4278198272 + + This high metric value ensures that the default unreachable route can + be overridden by a routing protocol suite. FRRouting interprets + kernel metrics as a combined admin distance (upper byte) and priority + (lower 3 bytes). Thus the above metric translates to [255/8192]. 4. Enslave L3 interfaces to a VRF device. ip link set dev eth1 master vrf-blue @@ -256,7 +261,7 @@ older form without it. For example: $ ip route show vrf red - prohibit default + unreachable default metric 4278198272 broadcast 10.2.1.0 dev eth1 proto kernel scope link src 10.2.1.2 10.2.1.0/24 dev eth1 proto kernel scope link src 10.2.1.2 local 10.2.1.2 dev eth1 proto kernel scope host src 10.2.1.2 @@ -282,7 +287,7 @@ older form without it. ff00::/8 dev red metric 256 pref medium ff00::/8 dev eth1 metric 256 pref medium ff00::/8 dev eth2 metric 256 pref medium - + unreachable default dev lo metric 4278198272 error -101 pref medium 8. Route Lookup for a VRF @@ -331,7 +336,7 @@ function vrf_create ip link add ${VRF} type vrf table ${TBID} if [ "${VRF}" != "mgmt" ]; then - ip route add table ${TBID} unreachable default + ip route add table ${TBID} unreachable default metric 4278198272 fi ip link set dev ${VRF} up } diff --git a/Documentation/perf/hisi-pmu.txt b/Documentation/perf/hisi-pmu.txt new file mode 100644 index 0000000000000000000000000000000000000000..267a028b2741811f08f82897149cf92701cb5f5c --- /dev/null +++ b/Documentation/perf/hisi-pmu.txt @@ -0,0 +1,53 @@ +HiSilicon SoC uncore Performance Monitoring Unit (PMU) +====================================================== +The HiSilicon SoC chip includes various independent system device PMUs +such as L3 cache (L3C), Hydra Home Agent (HHA) and DDRC. These PMUs are +independent and have hardware logic to gather statistics and performance +information. + +The HiSilicon SoC encapsulates multiple CPU and IO dies. Each CPU cluster +(CCL) is made up of 4 cpu cores sharing one L3 cache; each CPU die is +called Super CPU cluster (SCCL) and is made up of 6 CCLs. Each SCCL has +two HHAs (0 - 1) and four DDRCs (0 - 3), respectively. + +HiSilicon SoC uncore PMU driver +--------------------------------------- +Each device PMU has separate registers for event counting, control and +interrupt, and the PMU driver shall register perf PMU drivers like L3C, +HHA and DDRC etc. The available events and configuration options shall +be described in the sysfs, see : +/sys/devices/hisi_sccl{X}_/, or +/sys/bus/event_source/devices/hisi_sccl{X}_. +The "perf list" command shall list the available events from sysfs. + +Each L3C, HHA and DDRC is registered as a separate PMU with perf. The PMU +name will appear in event listing as hisi_sccl_module. +where "sccl-id" is the identifier of the SCCL and "index-id" is the index of +module. +e.g. hisi_sccl3_l3c0/rd_hit_cpipe is READ_HIT_CPIPE event of L3C index #0 in +SCCL ID #3. +e.g. hisi_sccl1_hha0/rx_operations is RX_OPERATIONS event of HHA index #0 in +SCCL ID #1. + +The driver also provides a "cpumask" sysfs attribute, which shows the CPU core +ID used to count the uncore PMU event. + +Example usage of perf: +$# perf list +hisi_sccl3_l3c0/rd_hit_cpipe/ [kernel PMU event] +------------------------------------------ +hisi_sccl3_l3c0/wr_hit_cpipe/ [kernel PMU event] +------------------------------------------ +hisi_sccl1_l3c0/rd_hit_cpipe/ [kernel PMU event] +------------------------------------------ +hisi_sccl1_l3c0/wr_hit_cpipe/ [kernel PMU event] +------------------------------------------ + +$# perf stat -a -e hisi_sccl3_l3c0/rd_hit_cpipe/ sleep 5 +$# perf stat -a -e hisi_sccl3_l3c0/config=0x02/ sleep 5 + +The current driver does not support sampling. So "perf record" is unsupported. +Also attach to a task is unsupported as the events are all uncore. + +Note: Please contact the maintainer for a complete list of events supported for +the PMU devices in the SoC and its information if needed. diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 57af2f7963eea56edef636905f7cc6a007d221f9..937e33c4621160c98c0728cfe283fe6f023d2a4c 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -435,8 +435,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: PM status to 'suspended' and update its parent's counter of 'active' children as appropriate (it is only valid to use this function if 'power.runtime_error' is set or 'power.disable_depth' is greater than - zero); it will fail and return an error code if the device has a child - which is active and the 'power.ignore_children' flag is unset + zero) bool pm_runtime_active(struct device *dev); - return true if the device's runtime PM status is 'active' or its diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 361789df51ecf58d5083436792588d2f12faa7f2..aa0a776c817a7ceabb217c3eecc31ecdb32f59c7 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -5,7 +5,6 @@ How to get printk format specifiers right :Author: Randy Dunlap :Author: Andrew Murray - Integer types ============= @@ -45,6 +44,18 @@ return from vsnprintf. Raw pointer value SHOULD be printed with %p. The kernel supports the following extended format specifiers for pointer types: +Pointer Types +============= + +Pointers printed without a specifier extension (i.e unadorned %p) are +hashed to give a unique identifier without leaking kernel addresses to user +space. On 64 bit machines the first 32 bits are zeroed. If you _really_ +want the address see %px below. + +:: + + %p abcdef12 or 00000000abcdef12 + Symbols/Function Pointers ========================= @@ -85,18 +96,32 @@ Examples:: printk("Faulted at %pS\n", (void *)regs->ip); printk(" %s%pB\n", (reliable ? "" : "? "), (void *)*stack); - Kernel Pointers =============== :: - %pK 0x01234567 or 0x0123456789abcdef + %pK 01234567 or 0123456789abcdef For printing kernel pointers which should be hidden from unprivileged users. The behaviour of ``%pK`` depends on the ``kptr_restrict sysctl`` - see Documentation/sysctl/kernel.txt for more details. +Unmodified Addresses +==================== + +:: + + %px 01234567 or 0123456789abcdef + +For printing pointers when you _really_ want to print the address. Please +consider whether or not you are leaking sensitive information about the +Kernel layout in memory before printing pointers with %px. %px is +functionally equivalent to %lx. %px is preferred to %lx because it is more +uniquely grep'able. If, in the future, we need to modify the way the Kernel +handles printing pointers it will be nice to be able to find the call +sites. + Struct Resources ================ diff --git a/Documentation/process/5.Posting.rst b/Documentation/process/5.Posting.rst index 1b7728b19ea7aaef7ca77fa5532a8065e66d414d..645fa9c7388a857607685047a547c1e9ede4a4be 100644 --- a/Documentation/process/5.Posting.rst +++ b/Documentation/process/5.Posting.rst @@ -213,6 +213,11 @@ The tags in common use are: which can be found in Documentation/process/submitting-patches.rst. Code without a proper signoff cannot be merged into the mainline. + - Co-Developed-by: states that the patch was also created by another developer + along with the original author. This is useful at times when multiple + people work on a single patch. Note, this person also needs to have a + Signed-off-by: line in the patch as well. + - Acked-by: indicates an agreement by another developer (often a maintainer of the relevant code) that the patch is appropriate for inclusion into the kernel. diff --git a/Documentation/scheduler/sched-deadline.txt b/Documentation/scheduler/sched-deadline.txt index e89e36ec15a5bf6453db0b77031d23a28c705e07..8ce78f82ae23a96d4301a1fd238f94b8ab3a0eac 100644 --- a/Documentation/scheduler/sched-deadline.txt +++ b/Documentation/scheduler/sched-deadline.txt @@ -204,10 +204,17 @@ CONTENTS It does so by decrementing the runtime of the executing task Ti at a pace equal to - dq = -max{ Ui, (1 - Uinact) } dt + dq = -max{ Ui / Umax, (1 - Uinact - Uextra) } dt - where Uinact is the inactive utilization, computed as (this_bq - running_bw), - and Ui is the bandwidth of task Ti. + where: + + - Ui is the bandwidth of task Ti; + - Umax is the maximum reclaimable utilization (subjected to RT throttling + limits); + - Uinact is the (per runqueue) inactive utilization, computed as + (this_bq - running_bw); + - Uextra is the (per runqueue) extra reclaimable utilization + (subjected to RT throttling limits). Let's now see a trivial example of two deadline tasks with runtime equal diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index 6338400eed73d7e2f8b90807186e15d54cd16cde..2c31d9ee6776ea7fef125d8fd00e7f2ef8614e36 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -319,12 +319,12 @@ struct Scsi_Host: instance. If the reference count reaches 0 then the given instance is freed -The Scsi_device structure has had reference counting infrastructure added. -This effectively spreads the ownership of struct Scsi_device instances +The scsi_device structure has had reference counting infrastructure added. +This effectively spreads the ownership of struct scsi_device instances across the various SCSI layers which use them. Previously such instances were exclusively owned by the mid level. See the access functions declared towards the end of include/scsi/scsi_device.h . If an LLD wants to keep -a copy of a pointer to a Scsi_device instance it should use scsi_device_get() +a copy of a pointer to a scsi_device instance it should use scsi_device_get() to bump its reference count. When it is finished with the pointer it can use scsi_device_put() to decrement its reference count (and potentially delete it). diff --git a/Documentation/security/keys/core.rst b/Documentation/security/keys/core.rst index 1266eeae45f69caeed72902d2507c3131de9a08f..9ce7256c6edba8b605e9928a42159d717f6d7cf5 100644 --- a/Documentation/security/keys/core.rst +++ b/Documentation/security/keys/core.rst @@ -628,12 +628,12 @@ The keyctl syscall functions are: defined key type will return its data as is. If a key type does not implement this function, error EOPNOTSUPP will result. - As much of the data as can be fitted into the buffer will be copied to - userspace if the buffer pointer is not NULL. - - On a successful return, the function will always return the amount of data - available rather than the amount copied. + If the specified buffer is too small, then the size of the buffer required + will be returned. Note that in this case, the contents of the buffer may + have been overwritten in some undefined way. + Otherwise, on success, the function will return the amount of data copied + into the buffer. * Instantiate a partially constructed key:: diff --git a/Documentation/svga.txt b/Documentation/svga.txt index 119f1515b1acbe693386bf816af524436fa27358..b6c2f9acca92b4f49582934eba45c2b24aeace2c 100644 --- a/Documentation/svga.txt +++ b/Documentation/svga.txt @@ -67,8 +67,7 @@ The menu looks like:: tells what video adapter did Linux detect -- it's either a generic adapter name (MDA, CGA, HGC, EGA, VGA, VESA VGA [a VGA with VESA-compliant BIOS]) or a chipset name (e.g., Trident). Direct detection -of chipsets is turned off by default (see CONFIG_VIDEO_SVGA in chapter 4 to see -how to enable it if you really want) as it's inherently unreliable due to +of chipsets is turned off by default as it's inherently unreliable due to absolutely insane PC design. "0 0F00 80x25" means that the first menu item (the menu items are numbered @@ -138,7 +137,7 @@ The ID numbers can be divided to those regions:: 0x0f05 VGA 80x30 (480 scans, 16-point font) 0x0f06 VGA 80x34 (480 scans, 14-point font) 0x0f07 VGA 80x60 (480 scans, 8-point font) - 0x0f08 Graphics hack (see the CONFIG_VIDEO_HACK paragraph below) + 0x0f08 Graphics hack (see the VIDEO_GFX_HACK paragraph below) 0x1000 to 0x7fff - modes specified by resolution. The code has a "0xRRCC" form where RR is a number of rows and CC is a number of columns. @@ -160,58 +159,22 @@ end of the display. Options ~~~~~~~ -Some options can be set in the source text (in arch/i386/boot/video.S). -All of them are simple #define's -- change them to #undef's when you want to -switch them off. Currently supported: - -CONFIG_VIDEO_SVGA - enables autodetection of SVGA cards. This is switched -off by default as it's a bit unreliable due to terribly bad PC design. If you -really want to have the adapter autodetected (maybe in case the ``scan`` feature -doesn't work on your machine), switch this on and don't cry if the results -are not completely sane. In case you really need this feature, please drop me -a mail as I think of removing it some day. - -CONFIG_VIDEO_VESA - enables autodetection of VESA modes. If it doesn't work -on your machine (or displays a "Error: Scanning of VESA modes failed" message), -you can switch it off and report as a bug. - -CONFIG_VIDEO_COMPACT - enables compacting of the video mode list. If there -are more modes with the same screen size, only the first one is kept (see above -for more info on mode ordering). However, in very strange cases it's possible -that the first "version" of the mode doesn't work although some of the others -do -- in this case turn this switch off to see the rest. - -CONFIG_VIDEO_RETAIN - enables retaining of screen contents when switching -video modes. Works only with some boot loaders which leave enough room for the -buffer. (If you have old LILO, you can adjust heap_end_ptr and loadflags -in setup.S, but it's better to upgrade the boot loader...) - -CONFIG_VIDEO_LOCAL - enables inclusion of "local modes" in the list. The -local modes are added automatically to the beginning of the list not depending -on hardware configuration. The local modes are listed in the source text after -the "local_mode_table:" line. The comment before this line describes the format -of the table (which also includes a video card name to be displayed on the -top of the menu). - -CONFIG_VIDEO_400_HACK - force setting of 400 scan lines for standard VGA -modes. This option is intended to be used on certain buggy BIOSes which draw -some useless logo using font download and then fail to reset the correct mode. -Don't use unless needed as it forces resetting the video card. - -CONFIG_VIDEO_GFX_HACK - includes special hack for setting of graphics modes -to be used later by special drivers (e.g., 800x600 on IBM ThinkPad -- see -ftp://ftp.phys.keio.ac.jp/pub/XFree86/800x600/XF86Configs/XF86Config.IBM_TP560). +Build options for arch/x86/boot/* are selected by the kernel kconfig +utility and the kernel .config file. + +VIDEO_GFX_HACK - includes special hack for setting of graphics modes +to be used later by special drivers. Allows to set _any_ BIOS mode including graphic ones and forcing specific text screen resolution instead of peeking it from BIOS variables. Don't use unless you think you know what you're doing. To activate this setup, use -mode number 0x0f08 (see section 3). +mode number 0x0f08 (see the Mode IDs section above). Still doesn't work? ~~~~~~~~~~~~~~~~~~~ When the mode detection doesn't work (e.g., the mode list is incorrect or the machine hangs instead of displaying the menu), try to switch off some of -the configuration options listed in section 4. If it fails, you can still use +the configuration options listed under "Options". If it fails, you can still use your kernel with the video mode set directly via the kernel parameter. In either case, please send me a bug report containing what _exactly_ @@ -228,10 +191,6 @@ contains the most common video BIOS bug called "incorrect vertical display end setting". Adding 0x8000 to the mode ID might fix the problem. Unfortunately, this must be done manually -- no autodetection mechanisms are available. -If you have a VGA card and your display still looks as on EGA, your BIOS -is probably broken and you need to set the CONFIG_VIDEO_400_HACK switch to -force setting of the correct mode. - History ~~~~~~~ diff --git a/Documentation/switchtec.txt b/Documentation/switchtec.txt index a0a9c7b3d4d546cc79cdbc39c6555371a4843675..f788264921ffa21415169997225ff40a70469bd7 100644 --- a/Documentation/switchtec.txt +++ b/Documentation/switchtec.txt @@ -78,3 +78,15 @@ The following IOCTLs are also supported by the device: between PCI Function Framework number (used by the event system) and Switchtec Logic Port ID and Partition number (which is more user friendly). + + +Non-Transparent Bridge (NTB) Driver +=================================== + +An NTB driver is provided for the switchtec hardware in switchtec_ntb. +Currently, it only supports switches configured with exactly 2 +partitions. It also requires the following configuration settings: + +* Both partitions must be able to access each other's GAS spaces. + Thus, the bits in the GAS Access Vector under Management Settings + must be set to support this. diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 9baf66a9ef4e7e57f24388d3da3130da83503195..5025ff9307e66c590a4a72795f9e2f75f0fbddc8 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -58,6 +58,7 @@ Currently, these files are in /proc/sys/vm: - percpu_pagelist_fraction - stat_interval - stat_refresh +- numa_stat - swappiness - user_reserve_kbytes - vfs_cache_pressure @@ -622,7 +623,7 @@ oom_dump_tasks Enables a system-wide task dump (excluding kernel threads) to be produced when the kernel performs an OOM-killing and includes such information as -pid, uid, tgid, vm size, rss, nr_ptes, nr_pmds, swapents, oom_score_adj +pid, uid, tgid, vm size, rss, pgtables_bytes, swapents, oom_score_adj score, and name. This is helpful to determine why the OOM killer was invoked, to identify the rogue task that caused it, and to determine why the OOM killer chose the task it did to kill. @@ -792,10 +793,25 @@ with no ill effects: errors and warnings on these stats are suppressed.) ============================================================== +numa_stat + +This interface allows runtime configuration of numa statistics. + +When page allocation performance becomes a bottleneck and you can tolerate +some possible tool breakage and decreased numa counter precision, you can +do: + echo 0 > /proc/sys/vm/numa_stat + +When page allocation performance is not a bottleneck and you want all +tooling to work, you can do: + echo 1 > /proc/sys/vm/numa_stat + +============================================================== + swappiness This control is used to define how aggressive the kernel will swap -memory pages. Higher values will increase agressiveness, lower values +memory pages. Higher values will increase aggressiveness, lower values decrease the amount of swap. A value of 0 instructs the kernel not to initiate swap until the amount of free and file-backed pages is less than the high water mark in a zone. diff --git a/Documentation/trace/coresight-cpu-debug.txt b/Documentation/trace/coresight-cpu-debug.txt index b3da1f90b8618ef95da6112a51cb62bc3c01590a..2b9b51cd501e68aff9d65d5a5de3d5514dc416a3 100644 --- a/Documentation/trace/coresight-cpu-debug.txt +++ b/Documentation/trace/coresight-cpu-debug.txt @@ -149,11 +149,23 @@ If you want to limit idle states at boot time, you can use "nohlt" or At the runtime you can disable idle states with below methods: -Set latency request to /dev/cpu_dma_latency to disable all CPUs specific idle -states (if latency = 0uS then disable all idle states): -# echo "what_ever_latency_you_need_in_uS" > /dev/cpu_dma_latency - -Disable specific CPU's specific idle state: +It is possible to disable CPU idle states by way of the PM QoS +subsystem, more specifically by using the "/dev/cpu_dma_latency" +interface (see Documentation/power/pm_qos_interface.txt for more +details). As specified in the PM QoS documentation the requested +parameter will stay in effect until the file descriptor is released. +For example: + +# exec 3<> /dev/cpu_dma_latency; echo 0 >&3 +... +Do some work... +... +# exec 3<>- + +The same can also be done from an application program. + +Disable specific CPU's specific idle state from cpuidle sysfs (see +Documentation/cpuidle/sysfs.txt): # echo 1 > /sys/devices/system/cpu/cpu$cpu/cpuidle/state$state/disable diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt index ec3b46e27b7aa3aeca361d169bfda8ea09bf91fb..0a0930ab415668a97ef649931f4af58c6fb2e2c1 100644 --- a/Documentation/translations/ko_KR/memory-barriers.txt +++ b/Documentation/translations/ko_KR/memory-barriers.txt @@ -82,7 +82,7 @@ Documentation/memory-barriers.txt - SMP 배리어 짝맞추기. - 메모리 배리어 시퀀스의 예. - 읽기 메모리 배리어 vs 로드 예측. - - 이행성 + - Multicopy 원자성. (*) 명시적 커널 배리어. @@ -656,6 +656,11 @@ Documentation/RCU/rcu_dereference.txt 파일을 주의 깊게 읽어 주시기 해줍니다. +데이터 의존성에 의해 제공되는 이 순서규칙은 이를 포함하고 있는 CPU 에 +지역적임을 알아두시기 바랍니다. 더 많은 정보를 위해선 "Multicopy 원자성" +섹션을 참고하세요. + + 데이터 의존성 배리어는 매우 중요한데, 예를 들어 RCU 시스템에서 그렇습니다. include/linux/rcupdate.h 의 rcu_assign_pointer() 와 rcu_dereference() 를 참고하세요. 여기서 데이터 의존성 배리어는 RCU 로 관리되는 포인터의 타겟을 현재 @@ -864,38 +869,10 @@ CPU 는 b 로부터의 로드 오퍼레이션이 a 로부터의 로드 오퍼레 주어진 if 문의 then 절과 else 절에게만 (그리고 이 두 절 내에서 호출되는 함수들에게까지) 적용되지, 이 if 문을 뒤따르는 코드에는 적용되지 않습니다. -마지막으로, 컨트롤 의존성은 이행성 (transitivity) 을 제공하지 -않습니다-. 이건 -'x' 와 'y' 가 둘 다 0 이라는 초기값을 가졌다는 가정 하의 두개의 예제로 -보이겠습니다: - - CPU 0 CPU 1 - ======================= ======================= - r1 = READ_ONCE(x); r2 = READ_ONCE(y); - if (r1 > 0) if (r2 > 0) - WRITE_ONCE(y, 1); WRITE_ONCE(x, 1); - - assert(!(r1 == 1 && r2 == 1)); - -이 두 CPU 예제에서 assert() 의 조건은 항상 참일 것입니다. 그리고, 만약 컨트롤 -의존성이 이행성을 (실제로는 그러지 않지만) 보장한다면, 다음의 CPU 가 추가되어도 -아래의 assert() 조건은 참이 될것입니다: - CPU 2 - ===================== - WRITE_ONCE(x, 2); +컨트롤 의존성에 의해 제공되는 이 순서규칙은 이를 포함하고 있는 CPU 에 +지역적입니다. 더 많은 정보를 위해선 "Multicopy 원자성" 섹션을 참고하세요. - assert(!(r1 == 2 && r2 == 1 && x == 2)); /* FAILS!!! */ - -하지만 컨트롤 의존성은 이행성을 제공하지 -않기- 때문에, 세개의 CPU 예제가 실행 -완료된 후에 위의 assert() 의 조건은 거짓으로 평가될 수 있습니다. 세개의 CPU -예제가 순서를 지키길 원한다면, CPU 0 와 CPU 1 코드의 로드와 스토어 사이, "if" -문 바로 다음에 smp_mb()를 넣어야 합니다. 더 나아가서, 최초의 두 CPU 예제는 -매우 위험하므로 사용되지 않아야 합니다. - -이 두개의 예제는 다음 논문: -http://www.cl.cam.ac.uk/users/pes20/ppc-supplemental/test6.pdf 와 -이 사이트: https://www.cl.cam.ac.uk/~pes20/ppcmem/index.html 에 나온 LB 와 WWC -리트머스 테스트입니다. 요약하자면: @@ -930,8 +907,8 @@ http://www.cl.cam.ac.uk/users/pes20/ppc-supplemental/test6.pdf 와 (*) 컨트롤 의존성은 보통 다른 타입의 배리어들과 짝을 맞춰 사용됩니다. - (*) 컨트롤 의존성은 이행성을 제공하지 -않습니다-. 이행성이 필요하다면, - smp_mb() 를 사용하세요. + (*) 컨트롤 의존성은 multicopy 원자성을 제공하지 -않습니다-. 모든 CPU 들이 + 특정 스토어를 동시에 보길 원한다면, smp_mb() 를 사용하세요. (*) 컴파일러는 컨트롤 의존성을 이해하고 있지 않습니다. 따라서 컴파일러가 여러분의 코드를 망가뜨리지 않도록 하는건 여러분이 해야 하는 일입니다. @@ -943,13 +920,14 @@ SMP 배리어 짝맞추기 CPU 간 상호작용을 다룰 때에 일부 타입의 메모리 배리어는 항상 짝을 맞춰 사용되어야 합니다. 적절하게 짝을 맞추지 않은 코드는 사실상 에러에 가깝습니다. -범용 배리어들은 범용 배리어끼리도 짝을 맞추지만 이행성이 없는 대부분의 다른 -타입의 배리어들과도 짝을 맞춥니다. ACQUIRE 배리어는 RELEASE 배리어와 짝을 -맞춥니다만, 둘 다 범용 배리어를 포함해 다른 배리어들과도 짝을 맞출 수 있습니다. -쓰기 배리어는 데이터 의존성 배리어나 컨트롤 의존성, ACQUIRE 배리어, RELEASE -배리어, 읽기 배리어, 또는 범용 배리어와 짝을 맞춥니다. 비슷하게 읽기 배리어나 -컨트롤 의존성, 또는 데이터 의존성 배리어는 쓰기 배리어나 ACQUIRE 배리어, -RELEASE 배리어, 또는 범용 배리어와 짝을 맞추는데, 다음과 같습니다: +범용 배리어들은 범용 배리어끼리도 짝을 맞추지만 multicopy 원자성이 없는 +대부분의 다른 타입의 배리어들과도 짝을 맞춥니다. ACQUIRE 배리어는 RELEASE +배리어와 짝을 맞춥니다만, 둘 다 범용 배리어를 포함해 다른 배리어들과도 짝을 +맞출 수 있습니다. 쓰기 배리어는 데이터 의존성 배리어나 컨트롤 의존성, ACQUIRE +배리어, RELEASE 배리어, 읽기 배리어, 또는 범용 배리어와 짝을 맞춥니다. +비슷하게 읽기 배리어나 컨트롤 의존성, 또는 데이터 의존성 배리어는 쓰기 배리어나 +ACQUIRE 배리어, RELEASE 배리어, 또는 범용 배리어와 짝을 맞추는데, 다음과 +같습니다: CPU 1 CPU 2 =============== =============== @@ -975,7 +953,7 @@ RELEASE 배리어, 또는 범용 배리어와 짝을 맞추는데, 다음과 같 =============== =============================== r1 = READ_ONCE(y); <범용 배리어> - WRITE_ONCE(y, 1); if (r2 = READ_ONCE(x)) { + WRITE_ONCE(x, 1); if (r2 = READ_ONCE(x)) { <묵시적 컨트롤 의존성> WRITE_ONCE(y, 1); } @@ -1361,57 +1339,74 @@ A 의 로드 두개가 모두 B 의 로드 뒤에 있지만, 서로 다른 값 : : +-------+ -이행성 ------- +MULTICOPY 원자성 +---------------- -이행성(transitivity)은 실제의 컴퓨터 시스템에서 항상 제공되지는 않는, 순서 -맞추기에 대한 상당히 직관적인 개념입니다. 다음의 예가 이행성을 보여줍니다: +Multicopy 원자성은 실제의 컴퓨터 시스템에서 항상 제공되지는 않는, 순서 맞추기에 +대한 상당히 직관적인 개념으로, 특정 스토어가 모든 CPU 들에게 동시에 보여지게 +됨을, 달리 말하자면 모든 CPU 들이 모든 스토어들이 보여지는 순서를 동의하게 되는 +것입니다. 하지만, 완전한 multicopy 원자성의 사용은 가치있는 하드웨어 +최적화들을 무능하게 만들어버릴 수 있어서, 보다 완화된 형태의 ``다른 multicopy +원자성'' 라는 이름의, 특정 스토어가 모든 -다른- CPU 들에게는 동시에 보여지게 +하는 보장을 대신 제공합니다. 이 문서의 뒷부분들은 이 완화된 형태에 대해 논하게 +됩니다만, 단순히 ``multicopy 원자성'' 이라고 부르겠습니다. + +다음의 예가 multicopy 원자성을 보입니다: CPU 1 CPU 2 CPU 3 ======================= ======================= ======================= { X = 0, Y = 0 } - STORE X=1 LOAD X STORE Y=1 - <범용 배리어> <범용 배리어> - LOAD Y LOAD X - -CPU 2 의 X 로드가 1을 리턴했고 Y 로드가 0을 리턴했다고 해봅시다. 이는 CPU 2 의 -X 로드가 CPU 1 의 X 스토어 뒤에 이루어졌고 CPU 2 의 Y 로드는 CPU 3 의 Y 스토어 -전에 이루어졌음을 의미합니다. 그럼 "CPU 3 의 X 로드는 0을 리턴할 수 있나요?" - -CPU 2 의 X 로드는 CPU 1 의 스토어 후에 이루어졌으니, CPU 3 의 X 로드는 1을 -리턴하는게 자연스럽습니다. 이런 생각이 이행성의 한 예입니다: CPU A 에서 실행된 -로드가 CPU B 에서의 같은 변수에 대한 로드를 뒤따른다면, CPU A 의 로드는 CPU B -의 로드가 내놓은 값과 같거나 그 후의 값을 내놓아야 합니다. - -리눅스 커널에서 범용 배리어의 사용은 이행성을 보장합니다. 따라서, 앞의 예에서 -CPU 2 의 X 로드가 1을, Y 로드는 0을 리턴했다면, CPU 3 의 X 로드는 반드시 1을 -리턴합니다. - -하지만, 읽기나 쓰기 배리어에 대해서는 이행성이 보장되지 -않습니다-. 예를 들어, -앞의 예에서 CPU 2 의 범용 배리어가 아래처럼 읽기 배리어로 바뀐 경우를 생각해 -봅시다: + STORE X=1 r1=LOAD X (reads 1) LOAD Y (reads 1) + <범용 배리어> <읽기 배리어> + STORE Y=r1 LOAD X + +CPU 2 의 Y 로의 스토어에 사용되는 X 로드의 결과가 1 이었고 CPU 3 의 Y 로드가 +1을 리턴했다고 해봅시다. 이는 CPU 1 의 X 로의 스토어가 CPU 2 의 X 로부터의 +로드를 앞서고 CPU 2 의 Y 로의 스토어가 CPU 3 의 Y 로부터의 로드를 앞섬을 +의미합니다. 또한, 여기서의 메모리 배리어들은 CPU 2 가 자신의 로드를 자신의 +스토어 전에 수행하고, CPU 3 가 Y 로부터의 로드를 X 로부터의 로드 전에 수행함을 +보장합니다. 그럼 "CPU 3 의 X 로부터의 로드는 0 을 리턴할 수 있을까요?" + +CPU 3 의 X 로드가 CPU 2 의 로드보다 뒤에 이루어졌으므로, CPU 3 의 X 로부터의 +로드는 1 을 리턴한다고 예상하는게 당연합니다. 이런 예상은 multicopy +원자성으로부터 나옵니다: CPU B 에서 수행된 로드가 CPU A 의 같은 변수로부터의 +로드를 뒤따른다면 (그리고 CPU A 가 자신이 읽은 값으로 먼저 해당 변수에 스토어 +하지 않았다면) multicopy 원자성을 제공하는 시스템에서는, CPU B 의 로드가 CPU A +의 로드와 같은 값 또는 그 나중 값을 리턴해야만 합니다. 하지만, 리눅스 커널은 +시스템들이 multicopy 원자성을 제공할 것을 요구하지 않습니다. + +앞의 범용 메모리 배리어의 사용은 모든 multicopy 원자성의 부족을 보상해줍니다. +앞의 예에서, CPU 2 의 X 로부터의 로드가 1 을 리턴했고 CPU 3 의 Y 로부터의 +로드가 1 을 리턴했다면, CPU 3 의 X 로부터의 로드는 1을 리턴해야만 합니다. + +하지만, 의존성, 읽기 배리어, 쓰기 배리어는 항상 non-multicopy 원자성을 보상해 +주지는 않습니다. 예를 들어, CPU 2 의 범용 배리어가 앞의 예에서 사라져서 +아래처럼 데이터 의존성만 남게 되었다고 해봅시다: CPU 1 CPU 2 CPU 3 ======================= ======================= ======================= { X = 0, Y = 0 } - STORE X=1 LOAD X STORE Y=1 - <읽기 배리어> <범용 배리어> - LOAD Y LOAD X - -이 코드는 이행성을 갖지 않습니다: 이 예에서는, CPU 2 의 X 로드가 1을 -리턴하고, Y 로드는 0을 리턴하지만 CPU 3 의 X 로드가 0을 리턴하는 것도 완전히 -합법적입니다. - -CPU 2 의 읽기 배리어가 자신의 읽기는 순서를 맞춰줘도, CPU 1 의 스토어와의 -순서를 맞춰준다고는 보장할 수 없다는게 핵심입니다. 따라서, CPU 1 과 CPU 2 가 -버퍼나 캐시를 공유하는 시스템에서 이 예제 코드가 실행된다면, CPU 2 는 CPU 1 이 -쓴 값에 좀 빨리 접근할 수 있을 것입니다. 따라서 CPU 1 과 CPU 2 의 접근으로 -조합된 순서를 모든 CPU 가 동의할 수 있도록 하기 위해 범용 배리어가 필요합니다. - -범용 배리어는 "글로벌 이행성"을 제공해서, 모든 CPU 들이 오퍼레이션들의 순서에 -동의하게 할 것입니다. 반면, release-acquire 조합은 "로컬 이행성" 만을 -제공해서, 해당 조합이 사용된 CPU 들만이 해당 액세스들의 조합된 순서에 동의함이 -보장됩니다. 예를 들어, 존경스런 Herman Hollerith 의 C 코드로 보면: + STORE X=1 r1=LOAD X (reads 1) LOAD Y (reads 1) + <데이터 의존성> <읽기 배리어> + STORE Y=r1 LOAD X (reads 0) + +이 변화는 non-multicopy 원자성이 만연하게 합니다: 이 예에서, CPU 2 의 X +로부터의 로드가 1을 리턴하고, CPU 3 의 Y 로부터의 로드가 1 을 리턴하는데, CPU 3 +의 X 로부터의 로드가 0 을 리턴하는게 완전히 합법적입니다. + +핵심은, CPU 2 의 데이터 의존성이 자신의 로드와 스토어를 순서짓지만, CPU 1 의 +스토어에 대한 순서는 보장하지 않는다는 것입니다. 따라서, 이 예제가 CPU 1 과 +CPU 2 가 스토어 버퍼나 한 수준의 캐시를 공유하는, multicopy 원자성을 제공하지 +않는 시스템에서 수행된다면 CPU 2 는 CPU 1 의 쓰기에 이른 접근을 할 수도 +있습니다. 따라서, 모든 CPU 들이 여러 접근들의 조합된 순서에 대해서 동의하게 +하기 위해서는 범용 배리어가 필요합니다. + +범용 배리어는 non-multicopy 원자성만 보상할 수 있는게 아니라, -모든- CPU 들이 +-모든- 오퍼레이션들의 순서를 동일하게 인식하게 하는 추가적인 순서 보장을 +만들어냅니다. 반대로, release-acquire 짝의 연결은 이런 추가적인 순서는 +제공하지 않는데, 해당 연결에 들어있는 CPU 들만이 메모리 접근의 조합된 순서에 +대해 동의할 것으로 보장됨을 의미합니다. 예를 들어, 존경스런 Herman Hollerith +의 코드를 C 코드로 변환하면: int u, v, x, y, z; @@ -1444,8 +1439,7 @@ CPU 2 의 읽기 배리어가 자신의 읽기는 순서를 맞춰줘도, CPU 1 } cpu0(), cpu1(), 그리고 cpu2() 는 smp_store_release()/smp_load_acquire() 쌍의 -연결을 통한 로컬 이행성에 동참하고 있으므로, 다음과 같은 결과는 나오지 않을 -겁니다: +연결에 참여되어 있으므로, 다음과 같은 결과는 나오지 않을 겁니다: r0 == 1 && r1 == 1 && r2 == 1 @@ -1454,8 +1448,9 @@ cpu0() 의 쓰기를 봐야만 하므로, 다음과 같은 결과도 없을 겁 r1 == 1 && r5 == 0 -하지만, release-acquire 타동성은 동참한 CPU 들에만 적용되므로 cpu3() 에는 -적용되지 않습니다. 따라서, 다음과 같은 결과가 가능합니다: +하지만, release-acquire 에 의해 제공되는 순서는 해당 연결에 동참한 CPU 들에만 +적용되므로 cpu3() 에, 적어도 스토어들 외에는 적용되지 않습니다. 따라서, 다음과 +같은 결과가 가능합니다: r0 == 0 && r1 == 1 && r2 == 1 && r3 == 0 && r4 == 0 @@ -1482,8 +1477,8 @@ u 로의 스토어를 cpu1() 의 v 로부터의 로드 뒤에 일어난 것으 이런 결과는 어떤 것도 재배치 되지 않는, 순차적 일관성을 가진 가상의 시스템에서도 일어날 수 있음을 기억해 두시기 바랍니다. -다시 말하지만, 당신의 코드가 글로벌 이행성을 필요로 한다면, 범용 배리어를 -사용하십시오. +다시 말하지만, 당신의 코드가 모든 오퍼레이션들의 완전한 순서를 필요로 한다면, +범용 배리어를 사용하십시오. ================== @@ -3046,6 +3041,9 @@ AMD64 Architecture Programmer's Manual Volume 2: System Programming Chapter 7.1: Memory-Access Ordering Chapter 7.4: Buffering and Combining Memory Writes +ARM Architecture Reference Manual (ARMv8, for ARMv8-A architecture profile) + Chapter B2: The AArch64 Application Level Memory Model + IA-32 Intel Architecture Software Developer's Manual, Volume 3: System Programming Guide Chapter 7.1: Locked Atomic Operations @@ -3057,6 +3055,8 @@ The SPARC Architecture Manual, Version 9 Appendix D: Formal Specification of the Memory Models Appendix J: Programming with the Memory Models +Storage in the PowerPC (Stone and Fitzgerald) + UltraSPARC Programmer Reference Manual Chapter 5: Memory Accesses and Cacheability Chapter 15: Sparc-V9 Memory Models diff --git a/Documentation/translations/zh_CN/gpio.txt b/Documentation/translations/zh_CN/gpio.txt index bce9725210659de9a7c1d3c97cb9d8374dc0d581..4f8bf30a41dc59ea52b0a77d5816cb6b1716f105 100644 --- a/Documentation/translations/zh_CN/gpio.txt +++ b/Documentation/translations/zh_CN/gpio.txt @@ -257,9 +257,9 @@ GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其 简单地关闭未使用时钟)。 对于 GPIO 使用 pinctrl 子系统已知的引脚，子系统应该被告知其使用情况； -一个 gpiolib 驱动的 .request()操作应调用 pinctrl_request_gpio()， -而 gpiolib 驱动的 .free()操作应调用 pinctrl_free_gpio()。pinctrl -子系统允许 pinctrl_request_gpio()在某个引脚或引脚组以复用形式“属于” +一个 gpiolib 驱动的 .request()操作应调用 pinctrl_gpio_request()， +而 gpiolib 驱动的 .free()操作应调用 pinctrl_gpio_free()。pinctrl +子系统允许 pinctrl_gpio_request()在某个引脚或引脚组以复用形式“属于” 一个设备时都成功返回。 任何须将 GPIO 信号导向适当引脚的引脚复用硬件的编程应该发生在 GPIO diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index e63a35fafef0e153c30023e92622111006d1dd7c..57d3ee9e4bde2a799715ca75871fd61b27858b0a 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1124,10 +1124,14 @@ guest physical address space and must not conflict with any memory slot or any mmio address. The guest may malfunction if it accesses this memory region. +Setting the address to 0 will result in resetting the address to its default +(0xfffbc000). + This ioctl is required on Intel-based hosts. This is needed on Intel hardware because of a quirk in the virtualization implementation (see the internals documentation when it pops into existence). +Fails if any VCPU has already been created. 4.41 KVM_SET_BOOT_CPU_ID @@ -2897,14 +2901,19 @@ userspace buffer and its length: struct kvm_s390_irq_state { __u64 buf; - __u32 flags; + __u32 flags; /* will stay unused for compatibility reasons */ __u32 len; - __u32 reserved[4]; + __u32 reserved[4]; /* will stay unused for compatibility reasons */ }; Userspace passes in the above struct and for each pending interrupt a struct kvm_s390_irq is copied to the provided buffer. +The structure contains a flags and a reserved field for future extensions. As +the kernel never checked for flags == 0 and QEMU never pre-zeroed flags and +reserved, these fields can not be used in the future without breaking +compatibility. + If -ENOBUFS is returned the buffer provided was too small and userspace may retry with a bigger buffer. @@ -2928,10 +2937,14 @@ containing a struct kvm_s390_irq_state: struct kvm_s390_irq_state { __u64 buf; + __u32 flags; /* will stay unused for compatibility reasons */ __u32 len; - __u32 pad; + __u32 reserved[4]; /* will stay unused for compatibility reasons */ }; +The restrictions for flags and reserved apply as well. +(see KVM_S390_GET_IRQ_STATE) + The userspace memory referenced by buf contains a struct kvm_s390_irq for each interrupt to be injected into the guest. If one of the interrupts could not be injected for some reason the @@ -4347,3 +4360,12 @@ This capability indicates that userspace can load HV_X64_MSR_VP_INDEX msr. Its value is used to denote the target vcpu for a SynIC interrupt. For compatibilty, KVM initializes this msr to KVM's internal vcpu index. When this capability is absent, userspace can still query this msr's value. + +8.13 KVM_CAP_S390_AIS_MIGRATION + +Architectures: s390 +Parameters: none + +This capability indicates if the flic device will be able to get/set the +AIS states for migration via the KVM_DEV_FLIC_AISM_ALL attribute and allows +to discover this without having to create a flic device. diff --git a/Documentation/virtual/kvm/devices/arm-vgic-its.txt b/Documentation/virtual/kvm/devices/arm-vgic-its.txt index eb06beb759601f1fa7c96a12ebda6a774f7d877f..4f0c9fc403656d2956fc70334d7d2a0151215f92 100644 --- a/Documentation/virtual/kvm/devices/arm-vgic-its.txt +++ b/Documentation/virtual/kvm/devices/arm-vgic-its.txt @@ -33,6 +33,10 @@ Groups: request the initialization of the ITS, no additional parameter in kvm_device_attr.addr. + KVM_DEV_ARM_ITS_CTRL_RESET + reset the ITS, no additional parameter in kvm_device_attr.addr. + See "ITS Reset State" section. + KVM_DEV_ARM_ITS_SAVE_TABLES save the ITS table data into guest RAM, at the location provisioned by the guest in corresponding registers/table entries. @@ -60,6 +64,8 @@ Groups: -EINVAL: Inconsistent restored data -EFAULT: Invalid guest ram access -EBUSY: One or more VCPUS are running + -EACCES: The virtual ITS is backed by a physical GICv4 ITS, and the + state is not available KVM_DEV_ARM_VGIC_GRP_ITS_REGS Attributes: @@ -157,3 +163,19 @@ Then vcpus can be started. - pINTID is the physical LPI ID; if zero, it means the entry is not valid and other fields are not meaningful. - ICID is the collection ID + + ITS Reset State: + ---------------- + +RESET returns the ITS to the same state that it was when first created and +initialized. When the RESET command returns, the following things are +guaranteed: + +- The ITS is not enabled and quiescent + GITS_CTLR.Enabled = 0 .Quiescent=1 +- There is no internally cached state +- No collection or device table are used + GITS_BASER.Valid = 0 +- GITS_CBASER = 0, GITS_CREADR = 0, GITS_CWRITER = 0 +- The ABI version is unchanged and remains the one set when the ITS + device was first created. diff --git a/Documentation/virtual/kvm/devices/s390_flic.txt b/Documentation/virtual/kvm/devices/s390_flic.txt index 2f1cbf1301d2291ba23d1073511cb0b2989d61f5..a4e20a09017468b2e5a97e7782ad74aab1431de5 100644 --- a/Documentation/virtual/kvm/devices/s390_flic.txt +++ b/Documentation/virtual/kvm/devices/s390_flic.txt @@ -151,8 +151,13 @@ struct kvm_s390_ais_all { to an ISC (MSB0 bit 0 to ISC 0 and so on). The combination of simm bit and nimm bit presents AIS mode for a ISC. + KVM_DEV_FLIC_AISM_ALL is indicated by KVM_CAP_S390_AIS_MIGRATION. + Note: The KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR device ioctls executed on FLIC with an unknown group or attribute gives the error code EINVAL (instead of ENXIO, as specified in the API documentation). It is not possible to conclude that a FLIC operation is unavailable based on the error code resulting from a usage attempt. + +Note: The KVM_DEV_FLIC_CLEAR_IO_IRQ ioctl will return EINVAL in case a zero +schid is specified. diff --git a/Documentation/vm/mmu_notifier.txt b/Documentation/vm/mmu_notifier.txt new file mode 100644 index 0000000000000000000000000000000000000000..23b462566bb762787197b553e871647d72f1aecd --- /dev/null +++ b/Documentation/vm/mmu_notifier.txt @@ -0,0 +1,93 @@ +When do you need to notify inside page table lock ? + +When clearing a pte/pmd we are given a choice to notify the event through +(notify version of *_clear_flush call mmu_notifier_invalidate_range) under +the page table lock. But that notification is not necessary in all cases. + +For secondary TLB (non CPU TLB) like IOMMU TLB or device TLB (when device use +thing like ATS/PASID to get the IOMMU to walk the CPU page table to access a +process virtual address space). There is only 2 cases when you need to notify +those secondary TLB while holding page table lock when clearing a pte/pmd: + + A) page backing address is free before mmu_notifier_invalidate_range_end() + B) a page table entry is updated to point to a new page (COW, write fault + on zero page, __replace_page(), ...) + +Case A is obvious you do not want to take the risk for the device to write to +a page that might now be used by some completely different task. + +Case B is more subtle. For correctness it requires the following sequence to +happen: + - take page table lock + - clear page table entry and notify ([pmd/pte]p_huge_clear_flush_notify()) + - set page table entry to point to new page + +If clearing the page table entry is not followed by a notify before setting +the new pte/pmd value then you can break memory model like C11 or C++11 for +the device. + +Consider the following scenario (device use a feature similar to ATS/PASID): + +Two address addrA and addrB such that |addrA - addrB| >= PAGE_SIZE we assume +they are write protected for COW (other case of B apply too). + +[Time N] -------------------------------------------------------------------- +CPU-thread-0 {try to write to addrA} +CPU-thread-1 {try to write to addrB} +CPU-thread-2 {} +CPU-thread-3 {} +DEV-thread-0 {read addrA and populate device TLB} +DEV-thread-2 {read addrB and populate device TLB} +[Time N+1] ------------------------------------------------------------------ +CPU-thread-0 {COW_step0: {mmu_notifier_invalidate_range_start(addrA)}} +CPU-thread-1 {COW_step0: {mmu_notifier_invalidate_range_start(addrB)}} +CPU-thread-2 {} +CPU-thread-3 {} +DEV-thread-0 {} +DEV-thread-2 {} +[Time N+2] ------------------------------------------------------------------ +CPU-thread-0 {COW_step1: {update page table to point to new page for addrA}} +CPU-thread-1 {COW_step1: {update page table to point to new page for addrB}} +CPU-thread-2 {} +CPU-thread-3 {} +DEV-thread-0 {} +DEV-thread-2 {} +[Time N+3] ------------------------------------------------------------------ +CPU-thread-0 {preempted} +CPU-thread-1 {preempted} +CPU-thread-2 {write to addrA which is a write to new page} +CPU-thread-3 {} +DEV-thread-0 {} +DEV-thread-2 {} +[Time N+3] ------------------------------------------------------------------ +CPU-thread-0 {preempted} +CPU-thread-1 {preempted} +CPU-thread-2 {} +CPU-thread-3 {write to addrB which is a write to new page} +DEV-thread-0 {} +DEV-thread-2 {} +[Time N+4] ------------------------------------------------------------------ +CPU-thread-0 {preempted} +CPU-thread-1 {COW_step3: {mmu_notifier_invalidate_range_end(addrB)}} +CPU-thread-2 {} +CPU-thread-3 {} +DEV-thread-0 {} +DEV-thread-2 {} +[Time N+5] ------------------------------------------------------------------ +CPU-thread-0 {preempted} +CPU-thread-1 {} +CPU-thread-2 {} +CPU-thread-3 {} +DEV-thread-0 {read addrA from old page} +DEV-thread-2 {read addrB from new page} + +So here because at time N+2 the clear page table entry was not pair with a +notification to invalidate the secondary TLB, the device see the new value for +addrB before seing the new value for addrA. This break total memory ordering +for the device. + +When changing a pte to write protect or to point to a new write protected page +with same content (KSM) it is fine to delay the mmu_notifier_invalidate_range +call to mmu_notifier_invalidate_range_end() outside the page table lock. This +is true even if the thread doing the page table update is preempted right after +releasing page table lock but before call mmu_notifier_invalidate_range_end(). diff --git a/Documentation/vm/zswap.txt b/Documentation/vm/zswap.txt index 89fff7d611ccb533a5c3d375bc94fecf3c2e0687..0b3a1148f9f0414558ed0537b4219225162ccc3a 100644 --- a/Documentation/vm/zswap.txt +++ b/Documentation/vm/zswap.txt @@ -98,5 +98,25 @@ request is made for a page in an old zpool, it is uncompressed using its original compressor. Once all pages are removed from an old zpool, the zpool and its compressor are freed. +Some of the pages in zswap are same-value filled pages (i.e. contents of the +page have same value or repetitive pattern). These pages include zero-filled +pages and they are handled differently. During store operation, a page is +checked if it is a same-value filled page before compressing it. If true, the +compressed length of the page is set to zero and the pattern or same-filled +value is stored. + +Same-value filled pages identification feature is enabled by default and can be +disabled at boot time by setting the "same_filled_pages_enabled" attribute to 0, +e.g. zswap.same_filled_pages_enabled=0. It can also be enabled and disabled at +runtime using the sysfs "same_filled_pages_enabled" attribute, e.g. + +echo 1 > /sys/module/zswap/parameters/same_filled_pages_enabled + +When zswap same-filled page identification is disabled at runtime, it will stop +checking for the same-value filled pages during store operation. However, the +existing pages which are marked as same-value filled pages remain stored +unchanged in zswap until they are either loaded or invalidated. + A debugfs interface is provided for various statistic about pool size, number -of pages stored, and various counters for the reasons pages are rejected. +of pages stored, same-value filled pages and various counters for the reasons +pages are rejected. diff --git a/Documentation/w1/slaves/00-INDEX b/Documentation/w1/slaves/00-INDEX index 8d76718e1ea26861cebb36a58f29aa023711ecf2..68946f83e579f580a0e7b5731f4b34b4eb26578e 100644 --- a/Documentation/w1/slaves/00-INDEX +++ b/Documentation/w1/slaves/00-INDEX @@ -10,3 +10,5 @@ w1_ds2438 - The Maxim/Dallas Semiconductor ds2438 smart battery monitor. w1_ds28e04 - The Maxim/Dallas Semiconductor ds28e04 eeprom. +w1_ds28e17 + - The Maxim/Dallas Semiconductor ds28e17 1-Wire-to-I2C Master Bridge. diff --git a/Documentation/w1/slaves/w1_ds28e17 b/Documentation/w1/slaves/w1_ds28e17 new file mode 100644 index 0000000000000000000000000000000000000000..7fcfad5b4a37280c1c8f997a271592ab72125af2 --- /dev/null +++ b/Documentation/w1/slaves/w1_ds28e17 @@ -0,0 +1,68 @@ +Kernel driver w1_ds28e17 +======================== + +Supported chips: + * Maxim DS28E17 1-Wire-to-I2C Master Bridge + +supported family codes: + W1_FAMILY_DS28E17 0x19 + +Author: Jan Kandziora + + +Description +----------- +The DS28E17 is a Onewire slave device which acts as an I2C bus master. + +This driver creates a new I2C bus for any DS28E17 device detected. I2C buses +come and go as the DS28E17 devices come and go. I2C slave devices connected to +a DS28E17 can be accessed by the kernel or userspace tools as if they were +connected to a "native" I2C bus master. + + +An udev rule like the following +------------------------------------------------------------------------------- +SUBSYSTEM=="i2c-dev", KERNEL=="i2c-[0-9]*", ATTRS{name}=="w1-19-*", \ + SYMLINK+="i2c-$attr{name}" +------------------------------------------------------------------------------- +may be used to create stable /dev/i2c- entries based on the unique id of the +DS28E17 chip. + + +Driver parameters are: + +speed: + This sets up the default I2C speed a DS28E17 get configured for as soon + it is connected. The power-on default of the DS28E17 is 400kBaud, but + chips may come and go on the Onewire bus without being de-powered and + as soon the "w1_ds28e17" driver notices a freshly connected, or + reconnected DS28E17 device on the Onewire bus, it will re-apply this + setting. + + Valid values are 100, 400, 900 [kBaud]. Any other value means to leave + alone the current DS28E17 setting on detect. The default value is 100. + +stretch: + This sets up the default stretch value used for freshly connected + DS28E17 devices. It is a multiplier used on the calculation of the busy + wait time for an I2C transfer. This is to account for I2C slave devices + which make heavy use of the I2C clock stretching feature and thus, the + needed timeout cannot be pre-calculated correctly. As the w1_ds28e17 + driver checks the DS28E17's busy flag in a loop after the precalculated + wait time, it should be hardly needed to tweak this setting. + + Leave it at 1 unless you get ETIMEDOUT errors and a "w1_slave_driver + 19-00000002dbd8: busy timeout" in the kernel log. + + Valid values are 1 to 9. The default is 1. + + +The driver creates sysfs files /sys/bus/w1/devices/19-/speed and +/sys/bus/w1/devices/19-/stretch for each device, preloaded with the default +settings from the driver parameters. They may be changed anytime. In addition a +directory /sys/bus/w1/devices/19-/i2c- for the I2C bus master sysfs +structure is created. + + +See https://github.com/ianka/w1_ds28e17 for even more information. + diff --git a/Documentation/x86/protection-keys.txt b/Documentation/x86/protection-keys.txt index fa46dcb347bc1d2ac60901c4621bd3bad81de601..ecb0d2dadfb769a83b2a3a3f4a20ce03df0aea79 100644 --- a/Documentation/x86/protection-keys.txt +++ b/Documentation/x86/protection-keys.txt @@ -1,5 +1,10 @@ -Memory Protection Keys for Userspace (PKU aka PKEYs) is a CPU feature -which will be found on future Intel CPUs. +Memory Protection Keys for Userspace (PKU aka PKEYs) is a feature +which is found on Intel's Skylake "Scalable Processor" Server CPUs. +It will be avalable in future non-server parts. + +For anyone wishing to test or use this feature, it is available in +Amazon's EC2 C5 instances and is known to work there using an Ubuntu +17.04 image. Memory Protection Keys provides a mechanism for enforcing page-based protections, but without requiring modification of the page tables diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt index 3448e675b4623ce81b5e0bc1116c52a12c411801..ad41b3813f0a3a3bd5abb32532b42c9b820bbe27 100644 --- a/Documentation/x86/x86_64/mm.txt +++ b/Documentation/x86/x86_64/mm.txt @@ -1,6 +1,4 @@ - - Virtual memory map with 4 level page tables: 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm @@ -14,13 +12,16 @@ ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB) ... unused hole ... ffffec0000000000 - fffffbffffffffff (=44 bits) kasan shadow memory (16TB) ... unused hole ... +fffffe0000000000 - fffffe7fffffffff (=39 bits) LDT remap for PTI +fffffe8000000000 - fffffeffffffffff (=39 bits) cpu_entry_area mapping ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks ... unused hole ... ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space ... unused hole ... ffffffff80000000 - ffffffff9fffffff (=512 MB) kernel text mapping, from phys 0 -ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space (variable) -ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls +ffffffffa0000000 - [fixmap start] (~1526 MB) module mapping space (variable) +[fixmap start] - ffffffffff5fffff kernel-internal fixmap range +ffffffffff600000 - ffffffffff600fff (=4 kB) legacy vsyscall ABI ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole Virtual memory map with 5 level page tables: @@ -29,26 +30,29 @@ Virtual memory map with 5 level page tables: hole caused by [56:63] sign extension ff00000000000000 - ff0fffffffffffff (=52 bits) guard hole, reserved for hypervisor ff10000000000000 - ff8fffffffffffff (=55 bits) direct mapping of all phys. memory -ff90000000000000 - ff91ffffffffffff (=49 bits) hole -ff92000000000000 - ffd1ffffffffffff (=54 bits) vmalloc/ioremap space +ff90000000000000 - ff9fffffffffffff (=52 bits) LDT remap for PTI +ffa0000000000000 - ffd1ffffffffffff (=54 bits) vmalloc/ioremap space (12800 TB) ffd2000000000000 - ffd3ffffffffffff (=49 bits) hole ffd4000000000000 - ffd5ffffffffffff (=49 bits) virtual memory map (512TB) ... unused hole ... ffdf000000000000 - fffffc0000000000 (=53 bits) kasan shadow memory (8PB) ... unused hole ... +fffffe8000000000 - fffffeffffffffff (=39 bits) cpu_entry_area mapping ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks ... unused hole ... ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space ... unused hole ... ffffffff80000000 - ffffffff9fffffff (=512 MB) kernel text mapping, from phys 0 -ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space -ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls +ffffffffa0000000 - [fixmap start] (~1526 MB) module mapping space +[fixmap start] - ffffffffff5fffff kernel-internal fixmap range +ffffffffff600000 - ffffffffff600fff (=4 kB) legacy vsyscall ABI ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole Architecture defines a 64-bit virtual address. Implementations can support less. Currently supported are 48- and 57-bit virtual addresses. Bits 63 -through to the most-significant implemented bit are set to either all ones -or all zero. This causes hole between user space and kernel addresses. +through to the most-significant implemented bit are sign extended. +This causes hole between user space and kernel addresses if you interpret them +as unsigned. The direct mapping covers all memory in the system up to the highest memory address (this means in some cases it can also include PCI memory @@ -58,9 +62,6 @@ vmalloc space is lazily synchronized into the different PML4/PML5 pages of the processes using the page fault handler, with init_top_pgt as reference. -Current X86-64 implementations support up to 46 bits of address space (64 TB), -which is our current limit. This expands into MBZ space in the page tables. - We map EFI runtime services in the 'efi_pgd' PGD in a 64Gb large virtual memory window (this size is arbitrary, it can be raised later if needed). The mappings are not part of any other kernel PGD and are only available @@ -72,5 +73,3 @@ following fixmap section. Note that if CONFIG_RANDOMIZE_MEMORY is enabled, the direct mapping of all physical memory, vmalloc/ioremap space and virtual memory map are randomized. Their order is preserved but their base will be offset early at boot time. - --Andi Kleen, Jul 2004 diff --git a/Kbuild b/Kbuild index af161aa1facd194baeb574e9d36a530274411702..00530420548225a8b26a36f504d9aa00468ddb42 100644 --- a/Kbuild +++ b/Kbuild @@ -18,7 +18,6 @@ targets := kernel/bounds.s # We use internal kbuild rules to avoid the "is up to date" message from make kernel/bounds.s: kernel/bounds.c FORCE - $(Q)mkdir -p $(dir $@) $(call if_changed_dep,cc_s_c) $(obj)/$(bounds-file): kernel/bounds.s FORCE @@ -54,7 +53,6 @@ targets += arch/$(SRCARCH)/kernel/asm-offsets.s # We use internal kbuild rules to avoid the "is up to date" message from make arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \ $(obj)/$(timeconst-file) $(obj)/$(bounds-file) FORCE - $(Q)mkdir -p $(dir $@) $(call if_changed_dep,cc_s_c) $(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s FORCE diff --git a/MAINTAINERS b/MAINTAINERS index fbebd08ae42e4a498fcd56743d4a0bd5b7c4ba3c..a6e86e20761e143ca976d4f8170e60b603bb5ed9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -384,6 +384,7 @@ ACPI WMI DRIVER L: platform-driver-x86@vger.kernel.org S: Orphan F: drivers/platform/x86/wmi.c +F: include/uapi/linux/wmi.h AD1889 ALSA SOUND DRIVER M: Thibaut Varene @@ -553,13 +554,13 @@ S: Orphan F: Documentation/filesystems/affs.txt F: fs/affs/ -AFS FILESYSTEM & AF_RXRPC SOCKET DOMAIN +AFS FILESYSTEM M: David Howells L: linux-afs@lists.infradead.org S: Supported F: fs/afs/ -F: include/net/af_rxrpc.h -F: net/rxrpc/af_rxrpc.c +F: include/trace/events/afs.h +F: Documentation/filesystems/afs.txt W: https://www.infradead.org/~dhowells/kafs/ AGPGART DRIVER @@ -695,9 +696,9 @@ F: include/linux/altera_uart.h F: include/linux/altera_jtaguart.h AMAZON ETHERNET DRIVERS -M: Netanel Belgazal -R: Saeed Bishara -R: Zorik Machulsky +M: Netanel Belgazal +R: Saeed Bishara +R: Zorik Machulsky L: netdev@vger.kernel.org S: Supported F: Documentation/networking/ena.txt @@ -754,8 +755,6 @@ F: drivers/gpu/drm/amd/amdkfd/ F: drivers/gpu/drm/amd/include/cik_structs.h F: drivers/gpu/drm/amd/include/kgd_kfd_interface.h F: drivers/gpu/drm/amd/include/vi_structs.h -F: drivers/gpu/drm/radeon/radeon_kfd.c -F: drivers/gpu/drm/radeon/radeon_kfd.h F: include/uapi/linux/kfd_ioctl.h AMD SEATTLE DEVICE TREE SUPPORT @@ -860,7 +859,8 @@ F: kernel/configs/android* ANDROID DRIVERS M: Greg Kroah-Hartman M: Arve Hjønnevåg -M: Riley Andrews +M: Todd Kjos +M: Martijn Coenen T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git L: devel@driverdev.osuosl.org S: Supported @@ -1221,6 +1221,8 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.linux4sam.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git S: Supported +N: at91 +N: atmel F: arch/arm/mach-at91/ F: include/soc/at91/ F: arch/arm/boot/dts/at91*.dts @@ -1229,6 +1231,9 @@ F: arch/arm/boot/dts/sama*.dts F: arch/arm/boot/dts/sama*.dtsi F: arch/arm/include/debug/at91.S F: drivers/memory/atmel* +F: drivers/watchdog/sama5d4_wdt.c +X: drivers/input/touchscreen/atmel_mxt_ts.c +X: drivers/net/wireless/atmel/ ARM/CALXEDA HIGHBANK ARCHITECTURE M: Rob Herring @@ -1586,10 +1591,13 @@ F: drivers/rtc/rtc-armada38x.c ARM/Mediatek RTC DRIVER M: Eddie Huang +M: Sean Wang L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) S: Maintained +F: Documentation/devicetree/bindings/rtc/rtc-mt7622.txt F: drivers/rtc/rtc-mt6397.c +F: drivers/rtc/rtc-mt7622.c ARM/Mediatek SoC support M: Matthias Brugger @@ -1763,6 +1771,7 @@ Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next S: Supported F: arch/arm64/boot/dts/renesas/ +F: Documentation/devicetree/bindings/arm/shmobile.txt F: drivers/soc/renesas/ F: include/linux/soc/renesas/ @@ -1882,6 +1891,7 @@ F: arch/arm/boot/dts/sh* F: arch/arm/configs/shmobile_defconfig F: arch/arm/include/debug/renesas-scif.S F: arch/arm/mach-shmobile/ +F: Documentation/devicetree/bindings/arm/shmobile.txt F: drivers/soc/renesas/ F: include/linux/soc/renesas/ @@ -1956,6 +1966,14 @@ M: Lennert Buytenhek L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +ARM/TEGRA HDMI CEC SUBSYSTEM SUPPORT +M: Hans Verkuil +L: linux-tegra@vger.kernel.org +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/media/platform/tegra-cec/ +F: Documentation/devicetree/bindings/media/tegra-cec.txt + ARM/TETON BGA MACHINE SUPPORT M: "Mark F. Brown" L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -2029,7 +2047,7 @@ F: arch/arm/boot/dts/uniphier* F: arch/arm/include/asm/hardware/cache-uniphier.h F: arch/arm/mach-uniphier/ F: arch/arm/mm/cache-uniphier.c -F: arch/arm64/boot/dts/socionext/ +F: arch/arm64/boot/dts/socionext/uniphier* F: drivers/bus/uniphier-system-bus.c F: drivers/clk/uniphier/ F: drivers/gpio/gpio-uniphier.c @@ -2133,7 +2151,6 @@ F: drivers/gpio/gpio-zx.c F: drivers/i2c/busses/i2c-zx2967.c F: drivers/mmc/host/dw_mmc-zx.* F: drivers/pinctrl/zte/ -F: drivers/reset/reset-zx2967.c F: drivers/soc/zte/ F: drivers/thermal/zx2967_thermal.c F: drivers/watchdog/zx2967_wdt.c @@ -2156,7 +2173,6 @@ F: sound/soc/zte/ ARM/ZYNQ ARCHITECTURE M: Michal Simek -R: Sören Brinkmann L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://wiki.xilinx.com T: git https://github.com/Xilinx/linux-xlnx.git @@ -2712,6 +2728,7 @@ L: linux-kernel@vger.kernel.org S: Supported F: arch/x86/net/bpf_jit* F: Documentation/networking/filter.txt +F: Documentation/bpf/ F: include/linux/bpf* F: include/linux/filter.h F: include/uapi/linux/bpf* @@ -2724,7 +2741,7 @@ F: net/core/filter.c F: net/sched/act_bpf.c F: net/sched/cls_bpf.c F: samples/bpf/ -F: tools/net/bpf* +F: tools/bpf/ F: tools/testing/selftests/bpf/ BROADCOM B44 10/100 ETHERNET DRIVER @@ -2903,6 +2920,7 @@ S: Maintained F: drivers/phy/broadcom/phy-brcm-usb* BROADCOM GENET ETHERNET DRIVER +M: Doug Berger M: Florian Fainelli L: netdev@vger.kernel.org S: Supported @@ -2929,6 +2947,7 @@ N: bcm583* N: bcm585* N: bcm586* N: bcm88312 +N: hr2 F: arch/arm64/boot/dts/broadcom/ns2* F: drivers/clk/bcm/clk-ns* F: drivers/pinctrl/bcm/pinctrl-ns* @@ -2972,6 +2991,14 @@ S: Maintained F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt F: drivers/cpufreq/brcmstb* +BROADCOM STB AVS TMON DRIVER +M: Markus Mayer +M: bcm-kernel-feedback-list@broadcom.com +L: linux-pm@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt +F: drivers/thermal/broadcom/brcmstb* + BROADCOM STB NAND FLASH DRIVER M: Brian Norris M: Kamal Dasu @@ -2980,6 +3007,14 @@ L: bcm-kernel-feedback-list@broadcom.com S: Maintained F: drivers/mtd/nand/brcmnand/ +BROADCOM STB DPFE DRIVER +M: Markus Mayer +M: bcm-kernel-feedback-list@broadcom.com +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt +F: drivers/memory/brcmstb_dpfe.c + BROADCOM SYSTEMPORT ETHERNET DRIVER M: Florian Fainelli L: netdev@vger.kernel.org @@ -3088,7 +3123,6 @@ F: arch/c6x/ CA8210 IEEE-802.15.4 RADIO DRIVER M: Harry Morris -M: linuxdev@cascoda.com L: linux-wpan@vger.kernel.org W: https://github.com/Cascoda/ca8210-linux.git S: Maintained @@ -3263,6 +3297,15 @@ F: include/uapi/linux/cec.h F: include/uapi/linux/cec-funcs.h F: Documentation/devicetree/bindings/media/cec.txt +CEC GPIO DRIVER +M: Hans Verkuil +L: linux-media@vger.kernel.org +T: git git://linuxtv.org/media_tree.git +W: http://linuxtv.org +S: Supported +F: drivers/media/platform/cec-gpio/ +F: Documentation/devicetree/bindings/media/cec-gpio.txt + CELL BROADBAND ENGINE ARCHITECTURE M: Arnd Bergmann L: linuxppc-dev@lists.ozlabs.org @@ -3335,17 +3378,22 @@ S: Maintained F: drivers/auxdisplay/cfag12864bfb.c F: include/linux/cfag12864b.h -CFG80211 and NL80211 +802.11 (including CFG80211/NL80211) M: Johannes Berg L: linux-wireless@vger.kernel.org W: http://wireless.kernel.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained +F: net/wireless/ F: include/uapi/linux/nl80211.h +F: include/linux/ieee80211.h +F: include/net/wext.h F: include/net/cfg80211.h -F: net/wireless/* -X: net/wireless/wext* +F: include/net/iw_handler.h +F: include/net/ieee80211_radiotap.h +F: Documentation/driver-api/80211/cfg80211.rst +F: Documentation/networking/regulatory.txt CHAR and MISC DRIVERS M: Arnd Bergmann @@ -3421,7 +3469,7 @@ F: drivers/scsi/snic/ CISCO VIC ETHERNET NIC DRIVER M: Christian Benvenuti M: Govindarajulu Varadarajan <_govind@gmx.com> -M: Neel Patel +M: Parvi Kaustubhi S: Supported F: drivers/net/ethernet/cisco/enic/ @@ -3472,7 +3520,7 @@ COCCINELLE/Semantic Patches (SmPL) M: Julia Lawall M: Gilles Muller M: Nicolas Palix -M: Michal Marek +M: Michal Marek L: cocci@systeme.lip6.fr (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc W: http://coccinelle.lip6.fr/ @@ -3586,7 +3634,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git S: Maintained F: Documentation/cgroup-v1/cpusets.txt F: include/linux/cpuset.h -F: kernel/cpuset.c +F: kernel/cgroup/cpuset.c CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG) M: Johannes Weiner @@ -3685,8 +3733,8 @@ F: drivers/cpuidle/* F: include/linux/cpuidle.h CRAMFS FILESYSTEM -W: http://sourceforge.net/projects/cramfs/ -S: Orphan / Obsolete +M: Nicolas Pitre +S: Maintained F: Documentation/filesystems/cramfs.txt F: fs/cramfs/ @@ -3987,6 +4035,26 @@ M: "Maciej W. Rozycki" S: Maintained F: drivers/net/fddi/defxx.* +DELL SMBIOS DRIVER +M: Pali Rohár +M: Mario Limonciello +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/dell-smbios.* + +DELL SMBIOS SMM DRIVER +M: Mario Limonciello +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/dell-smbios-smm.c + +DELL SMBIOS WMI DRIVER +M: Mario Limonciello +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/dell-smbios-wmi.c +F: tools/wmi/dell-smbios-example.c + DELL LAPTOP DRIVER M: Matthew Garrett M: Pali Rohár @@ -4016,12 +4084,17 @@ S: Maintained F: Documentation/dcdbas.txt F: drivers/firmware/dcdbas.* -DELL WMI EXTRAS DRIVER +DELL WMI NOTIFICATIONS DRIVER M: Matthew Garrett M: Pali Rohár S: Maintained F: drivers/platform/x86/dell-wmi.c +DELL WMI DESCRIPTOR DRIVER +M: Mario Limonciello +S: Maintained +F: drivers/platform/x86/dell-wmi-descriptor.c + DELTA ST MEDIA DRIVER M: Hugues Fruchet L: linux-media@vger.kernel.org @@ -4125,7 +4198,7 @@ F: Documentation/devicetree/bindings/mfd/da90*.txt F: Documentation/devicetree/bindings/input/da90??-onkey.txt F: Documentation/devicetree/bindings/thermal/da90??-thermal.txt F: Documentation/devicetree/bindings/regulator/da92*.txt -F: Documentation/devicetree/bindings/watchdog/da92??-wdt.txt +F: Documentation/devicetree/bindings/watchdog/da90??-wdt.txt F: Documentation/devicetree/bindings/sound/da[79]*.txt F: drivers/gpio/gpio-da90??.c F: drivers/hwmon/da90??-hwmon.c @@ -4173,7 +4246,7 @@ L: linux-i2c@vger.kernel.org S: Maintained F: drivers/i2c/busses/i2c-diolan-u2c.c -DIRECT ACCESS (DAX) +FILESYSTEM DIRECT ACCESS (DAX) M: Matthew Wilcox M: Ross Zwisler L: linux-fsdevel@vger.kernel.org @@ -4182,6 +4255,12 @@ F: fs/dax.c F: include/linux/dax.h F: include/trace/events/fs_dax.h +DEVICE DIRECT ACCESS (DAX) +M: Dan Williams +L: linux-nvdimm@lists.01.org +S: Supported +F: drivers/dax/ + DIRECTORY NOTIFICATION (DNOTIFY) M: Jan Kara R: Amir Goldstein @@ -4377,6 +4456,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc S: Maintained F: drivers/gpu/drm/bochs/ +DRM DRIVER FOR FARADAY TVE200 TV ENCODER +M: Linus Walleij +T: git git://anongit.freedesktop.org/drm/drm-misc +S: Maintained +F: drivers/gpu/drm/tve200/ + DRM DRIVER FOR INTEL I810 VIDEO CARDS S: Orphan / Obsolete F: drivers/gpu/drm/i810/ @@ -4520,7 +4605,7 @@ L: dri-devel@lists.freedesktop.org S: Supported F: drivers/gpu/drm/sun4i/ F: Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git +T: git git://anongit.freedesktop.org/drm/drm-misc DRM DRIVERS FOR AMLOGIC SOCS M: Neil Armstrong @@ -4704,7 +4789,7 @@ T: git git://anongit.freedesktop.org/drm/drm-misc DRM PANEL DRIVERS M: Thierry Reding L: dri-devel@lists.freedesktop.org -T: git git://anongit.freedesktop.org/tegra/linux.git +T: git git://anongit.freedesktop.org/drm/drm-misc S: Maintained F: drivers/gpu/drm/drm_panel.c F: drivers/gpu/drm/panel/ @@ -5169,7 +5254,7 @@ F: drivers/video/fbdev/s1d13xxxfb.c F: include/video/s1d13xxxfb.h ERRSEQ ERROR TRACKING INFRASTRUCTURE -M: Jeff Layton +M: Jeff Layton S: Maintained F: lib/errseq.c F: include/linux/errseq.h @@ -5346,7 +5431,7 @@ F: drivers/media/tuners/fc2580* FCOE SUBSYSTEM (libfc, libfcoe, fcoe) M: Johannes Thumshirn -L: fcoe-devel@open-fcoe.org +L: linux-scsi@vger.kernel.org W: www.Open-FCoE.org S: Supported F: drivers/scsi/libfc/ @@ -5357,7 +5442,7 @@ F: include/scsi/libfcoe.h F: include/uapi/scsi/fc/ FILE LOCKING (flock() and fcntl()/lockf()) -M: Jeff Layton +M: Jeff Layton M: "J. Bruce Fields" L: linux-fsdevel@vger.kernel.org S: Maintained @@ -5447,7 +5532,7 @@ K: fmc_d.*register FPGA MANAGER FRAMEWORK M: Alan Tull -R: Moritz Fischer +M: Moritz Fischer L: linux-fpga@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/atull/linux-fpga.git @@ -5472,6 +5557,7 @@ F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER M: Bartlomiej Zolnierkiewicz +L: dri-devel@lists.freedesktop.org L: linux-fbdev@vger.kernel.org T: git git://github.com/bzolnier/linux.git Q: http://patchwork.kernel.org/project/linux-fbdev/list/ @@ -6089,7 +6175,6 @@ M: Jean Delvare M: Guenter Roeck L: linux-hwmon@vger.kernel.org W: http://hwmon.wiki.kernel.org/ -T: quilt http://jdelvare.nerim.net/devel/linux/jdelvare-hwmon/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git S: Maintained F: Documentation/hwmon/ @@ -6259,6 +6344,13 @@ S: Maintained F: drivers/net/ethernet/hisilicon/ F: Documentation/devicetree/bindings/net/hisilicon*.txt +HISILICON PMU DRIVER +M: Shaokun Zhang +W: http://www.hisilicon.com +S: Supported +F: drivers/perf/hisilicon +F: Documentation/perf/hisi-pmu.txt + HISILICON ROCE DRIVER M: Lijun Ou M: Wei Hu(Xavier) @@ -6792,8 +6884,7 @@ F: drivers/ipack/ INFINIBAND SUBSYSTEM M: Doug Ledford -M: Sean Hefty -M: Hal Rosenstock +M: Jason Gunthorpe L: linux-rdma@vger.kernel.org W: http://www.openfabrics.org/ Q: http://patchwork.kernel.org/project/linux-rdma/list/ @@ -7119,6 +7210,11 @@ F: Documentation/wimax/README.i2400m F: drivers/net/wimax/i2400m/ F: include/uapi/linux/wimax/i2400m.h +INTEL WMI THUNDERBOLT FORCE POWER DRIVER +M: Mario Limonciello +S: Maintained +F: drivers/platform/x86/intel-wmi-thunderbolt.c + INTEL(R) TRACE HUB M: Alexander Shishkin S: Supported @@ -7380,7 +7476,7 @@ JFS FILESYSTEM M: Dave Kleikamp L: jfs-discussion@lists.sourceforge.net W: http://jfs.sourceforge.net/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git +T: git git://github.com/kleikamp/linux-shaggy.git S: Maintained F: Documentation/filesystems/jfs.txt F: fs/jfs/ @@ -7448,10 +7544,8 @@ F: mm/kasan/ F: scripts/Makefile.kasan KCONFIG -M: "Yann E. MORIN" L: linux-kbuild@vger.kernel.org -T: git git://gitorious.org/linux-kconfig/linux-kconfig -S: Maintained +S: Orphan F: Documentation/kbuild/kconfig-language.txt F: scripts/kconfig/ @@ -7480,7 +7574,7 @@ F: fs/autofs4/ KERNEL BUILD + files below scripts/ (unless maintained elsewhere) M: Masahiro Yamada -M: Michal Marek +M: Michal Marek T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git L: linux-kbuild@vger.kernel.org S: Maintained @@ -7498,7 +7592,7 @@ S: Odd Fixes KERNEL NFSD, SUNRPC, AND LOCKD SERVERS M: "J. Bruce Fields" -M: Jeff Layton +M: Jeff Layton L: linux-nfs@vger.kernel.org W: http://nfs.sourceforge.net/ T: git git://linux-nfs.org/~bfields/linux.git @@ -7619,6 +7713,7 @@ S: Supported F: arch/x86/kvm/ F: arch/x86/include/uapi/asm/kvm* F: arch/x86/include/asm/kvm* +F: arch/x86/include/asm/pvclock-abi.h F: arch/x86/kernel/kvm.c F: arch/x86/kernel/kvmclock.c @@ -7672,6 +7767,7 @@ F: security/keys/ KGDB / KDB /debug_core M: Jason Wessel +M: Daniel Thompson W: http://kgdb.wiki.kernel.org/ L: kgdb-bugreport@lists.sourceforge.net T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb.git @@ -7683,16 +7779,6 @@ F: include/linux/kdb.h F: include/linux/kgdb.h F: kernel/debug/ -KMEMCHECK -M: Vegard Nossum -M: Pekka Enberg -S: Maintained -F: Documentation/dev-tools/kmemcheck.rst -F: arch/x86/include/asm/kmemcheck.h -F: arch/x86/mm/kmemcheck/ -F: include/linux/kmemcheck.h -F: mm/kmemcheck.c - KMEMLEAK M: Catalin Marinas S: Maintained @@ -8226,6 +8312,7 @@ F: Documentation/networking/mac80211-injection.txt F: include/net/mac80211.h F: net/mac80211/ F: drivers/net/wireless/mac80211_hwsim.[ch] +F: Documentation/networking/mac80211_hwsim/README MAILBOX API M: Jassi Brar @@ -9245,9 +9332,9 @@ F: drivers/gpu/drm/mxsfb/ F: Documentation/devicetree/bindings/display/mxsfb-drm.txt MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE) -M: Hyong-Youb Kim +M: Chris Lee L: netdev@vger.kernel.org -W: https://www.myricom.com/support/downloads/myri10ge.html +W: https://www.cspi.com/ethernet-products/support/downloads/ S: Supported F: drivers/net/ethernet/myricom/myri10ge/ @@ -9420,6 +9507,7 @@ M: Florian Fainelli S: Maintained F: net/dsa/ F: include/net/dsa.h +F: include/linux/dsa/ F: drivers/net/dsa/ NETWORKING [GENERAL] @@ -9440,8 +9528,8 @@ F: include/uapi/linux/in.h F: include/uapi/linux/net.h F: include/uapi/linux/netdevice.h F: include/uapi/linux/net_namespace.h -F: tools/net/ F: tools/testing/selftests/net/ +F: lib/net_utils.c F: lib/random32.c NETWORKING [IPSEC] @@ -9642,12 +9730,11 @@ S: Supported F: drivers/ntb/hw/idt/ NTB INTEL DRIVER -M: Jon Mason M: Dave Jiang L: linux-ntb@googlegroups.com S: Supported -W: https://github.com/jonmason/ntb/wiki -T: git git://github.com/jonmason/ntb.git +W: https://github.com/davejiang/linux/wiki +T: git https://github.com/davejiang/linux.git F: drivers/ntb/hw/intel/ NTFS FILESYSTEM @@ -10359,6 +10446,8 @@ F: Documentation/switchtec.txt F: Documentation/ABI/testing/sysfs-class-switchtec F: drivers/pci/switch/switchtec* F: include/uapi/linux/switchtec_ioctl.h +F: include/linux/switchtec.h +F: drivers/ntb/hw/mscc/ PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support) M: Thomas Petazzoni @@ -10509,6 +10598,14 @@ S: Maintained F: Documentation/devicetree/bindings/pci/pcie-kirin.txt F: drivers/pci/dwc/pcie-kirin.c +PCIE DRIVER FOR HISILICON STB +M: Jianguo Sun +M: Shawn Guo +L: linux-pci@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt +F: drivers/pci/dwc/pcie-histb.c + PCIE DRIVER FOR MEDIATEK M: Ryder Lee L: linux-pci@vger.kernel.org @@ -10532,6 +10629,13 @@ S: Maintained F: Documentation/devicetree/bindings/pci/rockchip-pcie.txt F: drivers/pci/host/pcie-rockchip.c +PCI DRIVER FOR V3 SEMICONDUCTOR V360EPC +M: Linus Walleij +L: linux-pci@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt +F: drivers/pci/host/pci-v3-semi.c + PCIE DRIVER FOR ST SPEAR13XX M: Pratyush Anand L: linux-pci@vger.kernel.org @@ -10562,6 +10666,12 @@ S: Maintained F: crypto/pcrypt.c F: include/crypto/pcrypt.h +PEAQ WMI HOTKEYS DRIVER +M: Hans de Goede +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/peaq-wmi.c + PER-CPU MEMORY ALLOCATOR M: Tejun Heo M: Christoph Lameter @@ -10675,6 +10785,7 @@ PIN CONTROLLER - RENESAS M: Laurent Pinchart M: Geert Uytterhoeven L: linux-renesas-soc@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git sh-pfc S: Maintained F: drivers/pinctrl/sh-pfc/ @@ -11103,6 +11214,7 @@ F: drivers/net/ethernet/qlogic/qede/ QLOGIC QL4xxx RDMA DRIVER M: Ram Amrani +M: Michal Kalderon M: Ariel Elior L: linux-rdma@vger.kernel.org S: Supported @@ -11473,6 +11585,7 @@ F: include/linux/rpmsg/ RENESAS CLOCK DRIVERS M: Geert Uytterhoeven L: linux-renesas-soc@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git clk-renesas S: Supported F: drivers/clk/renesas/ @@ -11515,6 +11628,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained F: Documentation/rfkill.txt +F: Documentation/ABI/stable/sysfs-class-rfkill F: net/rfkill/ RHASHTABLE @@ -11536,6 +11650,16 @@ S: Maintained F: drivers/mtd/nand/r852.c F: drivers/mtd/nand/r852.h +RISC-V ARCHITECTURE +M: Palmer Dabbelt +M: Albert Ou +L: patches@groups.riscv.org +T: git https://github.com/riscv/riscv-linux +S: Supported +F: arch/riscv/ +K: riscv +N: riscv + ROCCAT DRIVERS M: Stefan Achatz W: http://sourceforge.net/projects/roccat/ @@ -11544,6 +11668,13 @@ F: drivers/hid/hid-roccat* F: include/linux/hid-roccat* F: Documentation/ABI/*/sysfs-driver-hid-roccat* +ROCKCHIP RASTER 2D GRAPHIC ACCELERATION UNIT DRIVER +M: Jacob chen +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/media/platform/rockchip/rga/ +F: Documentation/devicetree/bindings/media/rockchip-rga.txt + ROCKER DRIVER M: Jiri Pirko L: netdev@vger.kernel.org @@ -11647,6 +11778,18 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jes/linux.git rtl8xxxu-deve S: Maintained F: drivers/net/wireless/realtek/rtl8xxxu/ +RXRPC SOCKETS (AF_RXRPC) +M: David Howells +L: linux-afs@lists.infradead.org +S: Supported +F: net/rxrpc/ +F: include/keys/rxrpc-type.h +F: include/net/af_rxrpc.h +F: include/trace/events/rxrpc.h +F: include/uapi/linux/rxrpc.h +F: Documentation/networking/rxrpc.txt +W: https://www.infradead.org/~dhowells/kafs/ + S3 SAVAGE FRAMEBUFFER DRIVER M: Antonino Daplas L: linux-fbdev@vger.kernel.org @@ -12500,6 +12643,14 @@ S: Maintained F: drivers/ssb/ F: include/linux/ssb/ +SONY IMX274 SENSOR DRIVER +M: Leon Luo +L: linux-media@vger.kernel.org +T: git git://linuxtv.org/media_tree.git +S: Maintained +F: drivers/media/i2c/imx274.c +F: Documentation/devicetree/bindings/media/i2c/imx274.txt + SONY MEMORYSTICK CARD SUPPORT M: Alex Dubov W: http://tifmxx.berlios.de/ @@ -12693,6 +12844,13 @@ L: stable@vger.kernel.org S: Supported F: Documentation/process/stable-kernel-rules.rst +STAGING - ATOMISP DRIVER +M: Alan Cox +M: Sakari Ailus +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/staging/media/atomisp/ + STAGING - COMEDI M: Ian Abbott M: H Hartley Sweeten @@ -12936,6 +13094,12 @@ F: arch/arc/plat-axs10x F: arch/arc/boot/dts/ax* F: Documentation/devicetree/bindings/arc/axs10* +SYNOPSYS AXS10x RESET CONTROLLER DRIVER +M: Eugeniy Paltsev +S: Supported +F: drivers/reset/reset-axs10x.c +F: Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt + SYNOPSYS DESIGNWARE APB GPIO DRIVER M: Hoan Tran L: linux-gpio@vger.kernel.org @@ -12953,6 +13117,7 @@ F: drivers/dma/dw/ SYNOPSYS DESIGNWARE ENTERPRISE ETHERNET DRIVER M: Jie Deng +M: Jose Abreu L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/synopsys/ @@ -13326,8 +13491,18 @@ M: Andreas Noever M: Michael Jamet M: Mika Westerberg M: Yehezkel Bernat +T: git git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git S: Maintained F: drivers/thunderbolt/ +F: include/linux/thunderbolt.h + +THUNDERBOLT NETWORK DRIVER +M: Michael Jamet +M: Mika Westerberg +M: Yehezkel Bernat +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/thunderbolt.c THUNDERX GPIO DRIVER M: David Daney @@ -13495,10 +13670,8 @@ F: drivers/net/wireless/ti/ F: include/linux/wl12xx.h TILE ARCHITECTURE -M: Chris Metcalf W: http://www.mellanox.com/repository/solutions/tile-scm/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile.git -S: Supported +S: Orphan F: arch/tile/ F: drivers/char/tile-srom.c F: drivers/edac/tile_edac.c @@ -13784,7 +13957,7 @@ UDRAW TABLET M: Bastien Nocera L: linux-input@vger.kernel.org S: Maintained -F: drivers/hid/hid-udraw.c +F: drivers/hid/hid-udraw-ps3.c UFS FILESYSTEM M: Evgeniy Dushistov @@ -14307,12 +14480,15 @@ S: Maintained F: include/linux/virtio_vsock.h F: include/uapi/linux/virtio_vsock.h F: include/uapi/linux/vsockmon.h +F: include/uapi/linux/vm_sockets_diag.h +F: net/vmw_vsock/diag.c F: net/vmw_vsock/af_vsock_tap.c F: net/vmw_vsock/virtio_transport_common.c F: net/vmw_vsock/virtio_transport.c F: drivers/net/vsockmon.c F: drivers/vhost/vsock.c F: drivers/vhost/vsock.h +F: tools/testing/vsock/ VIRTIO CONSOLE DRIVER M: Amit Shah @@ -14409,7 +14585,7 @@ M: Manohar Vanga M: Greg Kroah-Hartman L: devel@driverdev.osuosl.org S: Maintained -T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git F: Documentation/driver-api/vme.rst F: drivers/staging/vme/ F: drivers/vme/ @@ -14576,7 +14752,6 @@ L: wil6210@qca.qualcomm.com S: Supported W: http://wireless.kernel.org/en/users/Drivers/wil6210 F: drivers/net/wireless/ath/wil6210/ -F: include/uapi/linux/wil6210_uapi.h WIMAX STACK M: Inaky Perez-Gonzalez @@ -14761,6 +14936,7 @@ F: arch/x86/xen/ F: drivers/*/xen-*front.c F: drivers/xen/ F: arch/x86/include/asm/xen/ +F: arch/x86/include/asm/pvclock-abi.h F: include/xen/ F: include/uapi/xen/ F: Documentation/ABI/stable/sysfs-hypervisor-xen diff --git a/Makefile b/Makefile index 33cefc31124d93cfcbb6063cf1afa558b1f28aa3..92b74bcd3c2a28870c4368bfa26c60e9e510f3e5 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 4 -PATCHLEVEL = 14 +PATCHLEVEL = 15 SUBLEVEL = 0 -EXTRAVERSION = +EXTRAVERSION = -rc5 NAME = Fearless Coyote # *DOCUMENTATION* @@ -11,6 +11,10 @@ NAME = Fearless Coyote # Comments in this file are targeted only to the developer, do not # expect to learn how to build the kernel reading this file. +# That's our default target when none is given on the command line +PHONY := _all +_all: + # o Do not use make's built-in rules and variables # (this increases performance and avoids hard-to-debug behaviour); # o Look for make include files relative to root of kernel src @@ -117,10 +121,6 @@ ifeq ("$(origin O)", "command line") KBUILD_OUTPUT := $(O) endif -# That's our default target when none is given on the command line -PHONY := _all -_all: - # Cancel implicit rules on top Makefile $(CURDIR)/Makefile Makefile: ; @@ -132,7 +132,7 @@ ifneq ($(KBUILD_OUTPUT),) # check that the output directory actually exists saved-output := $(KBUILD_OUTPUT) KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \ - && /bin/pwd) + && pwd) $(if $(KBUILD_OUTPUT),, \ $(error failed to create output directory "$(saved-output)")) @@ -187,15 +187,6 @@ ifeq ("$(origin M)", "command line") KBUILD_EXTMOD := $(M) endif -# If building an external module we do not care about the all: rule -# but instead _all depend on modules -PHONY += all -ifeq ($(KBUILD_EXTMOD),) -_all: all -else -_all: modules -endif - ifeq ($(KBUILD_SRC),) # building in the source tree srctree := . @@ -207,6 +198,9 @@ else srctree := $(KBUILD_SRC) endif endif + +export KBUILD_CHECKSRC KBUILD_EXTMOD KBUILD_SRC + objtree := . src := $(srctree) obj := $(objtree) @@ -215,6 +209,74 @@ VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) export srctree objtree VPATH +# To make sure we do not include .config for any of the *config targets +# catch them early, and hand them over to scripts/kconfig/Makefile +# It is allowed to specify more targets when calling make, including +# mixing *config targets and build targets. +# For example 'make oldconfig all'. +# Detect when mixed targets is specified, and make a second invocation +# of make so .config is not included in this case either (for *config). + +version_h := include/generated/uapi/linux/version.h +old_version_h := include/linux/version.h + +no-dot-config-targets := clean mrproper distclean \ + cscope gtags TAGS tags help% %docs check% coccicheck \ + $(version_h) headers_% archheaders archscripts \ + kernelversion %src-pkg + +config-targets := 0 +mixed-targets := 0 +dot-config := 1 + +ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) + ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) + dot-config := 0 + endif +endif + +ifeq ($(KBUILD_EXTMOD),) + ifneq ($(filter config %config,$(MAKECMDGOALS)),) + config-targets := 1 + ifneq ($(words $(MAKECMDGOALS)),1) + mixed-targets := 1 + endif + endif +endif +# install and modules_install need also be processed one by one +ifneq ($(filter install,$(MAKECMDGOALS)),) + ifneq ($(filter modules_install,$(MAKECMDGOALS)),) + mixed-targets := 1 + endif +endif + +ifeq ($(mixed-targets),1) +# =========================================================================== +# We're called with mixed targets (*config and build targets). +# Handle them one by one. + +PHONY += $(MAKECMDGOALS) __build_one_by_one + +$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one + @: + +__build_one_by_one: + $(Q)set -e; \ + for i in $(MAKECMDGOALS); do \ + $(MAKE) -f $(srctree)/Makefile $$i; \ + done + +else + +# We need some generic definitions (do not try to remake the file). +scripts/Kbuild.include: ; +include scripts/Kbuild.include + +# Read KERNELRELEASE from include/config/kernel.release (if it exists) +KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) +KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) +export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION + # SUBARCH tells the usermode build what the underlying arch is. That is set # first, and if a usermode build is happening, the "ARCH=um" on the command # line overrides the setting of ARCH below. If a native build is happening, @@ -226,7 +288,8 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \ -e s/arm.*/arm/ -e s/sa110/arm/ \ -e s/s390x/s390/ -e s/parisc64/parisc/ \ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ - -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ ) + -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ \ + -e s/riscv.*/riscv/) # Cross compiling and selecting different set of gcc/bin-utils # --------------------------------------------------------------------------- @@ -284,9 +347,6 @@ ifeq ($(ARCH),tilegx) SRCARCH := tile endif -# Where to locate arch specific headers -hdr-arch := $(SRCARCH) - KCONFIG_CONFIG ?= .config export KCONFIG_CONFIG @@ -307,45 +367,6 @@ HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) HOST_LOADLIBES := $(HOST_LFS_LIBS) -ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1) -HOSTCFLAGS += -Wno-unused-value -Wno-unused-parameter \ - -Wno-missing-field-initializers -fno-delete-null-pointer-checks -endif - -# Decide whether to build built-in, modular, or both. -# Normally, just do built-in. - -KBUILD_MODULES := -KBUILD_BUILTIN := 1 - -# If we have only "make modules", don't compile built-in objects. -# When we're building modules with modversions, we need to consider -# the built-in objects during the descend as well, in order to -# make sure the checksums are up to date before we record them. - -ifeq ($(MAKECMDGOALS),modules) - KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) -endif - -# If we have "make modules", compile modules -# in addition to whatever we do anyway. -# Just "make" or "make all" shall build modules as well - -ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) - KBUILD_MODULES := 1 -endif - -ifeq ($(MAKECMDGOALS),) - KBUILD_MODULES := 1 -endif - -export KBUILD_MODULES KBUILD_BUILTIN -export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD - -# We need some generic definitions (do not try to remake the file). -scripts/Kbuild.include: ; -include scripts/Kbuild.include - # Make variables (CC, etc...) AS = $(CROSS_COMPILE)as LD = $(CROSS_COMPILE)ld @@ -373,14 +394,11 @@ LDFLAGS_MODULE = CFLAGS_KERNEL = AFLAGS_KERNEL = LDFLAGS_vmlinux = -CFLAGS_GCOV := -fprofile-arcs -ftest-coverage -fno-tree-loop-im $(call cc-disable-warning,maybe-uninitialized,) -CFLAGS_KCOV := $(call cc-option,-fsanitize-coverage=trace-pc,) - # Use USERINCLUDE when you must reference the UAPI directories only. USERINCLUDE := \ - -I$(srctree)/arch/$(hdr-arch)/include/uapi \ - -I$(objtree)/arch/$(hdr-arch)/include/generated/uapi \ + -I$(srctree)/arch/$(SRCARCH)/include/uapi \ + -I$(objtree)/arch/$(SRCARCH)/include/generated/uapi \ -I$(srctree)/include/uapi \ -I$(objtree)/include/generated/uapi \ -include $(srctree)/include/linux/kconfig.h @@ -388,40 +406,33 @@ USERINCLUDE := \ # Use LINUXINCLUDE when you must reference the include/ directory. # Needed to be compatible with the O= option LINUXINCLUDE := \ - -I$(srctree)/arch/$(hdr-arch)/include \ - -I$(objtree)/arch/$(hdr-arch)/include/generated \ + -I$(srctree)/arch/$(SRCARCH)/include \ + -I$(objtree)/arch/$(SRCARCH)/include/generated \ $(if $(KBUILD_SRC), -I$(srctree)/include) \ -I$(objtree)/include \ $(USERINCLUDE) -KBUILD_CPPFLAGS := -D__KERNEL__ - +KBUILD_AFLAGS := -D__ASSEMBLY__ KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -fno-strict-aliasing -fno-common -fshort-wchar \ -Werror-implicit-function-declaration \ -Wno-format-security \ - -std=gnu89 $(call cc-option,-fno-PIE) - - + -std=gnu89 +KBUILD_CPPFLAGS := -D__KERNEL__ KBUILD_AFLAGS_KERNEL := KBUILD_CFLAGS_KERNEL := -KBUILD_AFLAGS := -D__ASSEMBLY__ $(call cc-option,-fno-PIE) KBUILD_AFLAGS_MODULE := -DMODULE KBUILD_CFLAGS_MODULE := -DMODULE KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds +GCC_PLUGINS_CFLAGS := -# Read KERNELRELEASE from include/config/kernel.release (if it exists) -KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) -KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) - -export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC export CPP AR NM STRIP OBJCOPY OBJDUMP HOSTLDFLAGS HOST_LOADLIBES export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS -export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV CFLAGS_KCOV CFLAGS_KASAN CFLAGS_UBSAN +export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_KASAN CFLAGS_UBSAN export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL @@ -463,73 +474,38 @@ ifneq ($(KBUILD_SRC),) $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) endif -# Support for using generic headers in asm-generic -PHONY += asm-generic uapi-asm-generic -asm-generic: uapi-asm-generic - $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ - src=asm obj=arch/$(SRCARCH)/include/generated/asm -uapi-asm-generic: - $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ - src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm - -# To make sure we do not include .config for any of the *config targets -# catch them early, and hand them over to scripts/kconfig/Makefile -# It is allowed to specify more targets when calling make, including -# mixing *config targets and build targets. -# For example 'make oldconfig all'. -# Detect when mixed targets is specified, and make a second invocation -# of make so .config is not included in this case either (for *config). - -version_h := include/generated/uapi/linux/version.h -old_version_h := include/linux/version.h - -no-dot-config-targets := clean mrproper distclean \ - cscope gtags TAGS tags help% %docs check% coccicheck \ - $(version_h) headers_% archheaders archscripts \ - kernelversion %src-pkg - -config-targets := 0 -mixed-targets := 0 -dot-config := 1 - -ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) - ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) - dot-config := 0 - endif -endif - -ifeq ($(KBUILD_EXTMOD),) - ifneq ($(filter config %config,$(MAKECMDGOALS)),) - config-targets := 1 - ifneq ($(words $(MAKECMDGOALS)),1) - mixed-targets := 1 - endif - endif +ifeq ($(cc-name),clang) +ifneq ($(CROSS_COMPILE),) +CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%)) +GCC_TOOLCHAIN := $(realpath $(dir $(shell which $(LD)))/..) endif -# install and modules_install need also be processed one by one -ifneq ($(filter install,$(MAKECMDGOALS)),) - ifneq ($(filter modules_install,$(MAKECMDGOALS)),) - mixed-targets := 1 - endif +ifneq ($(GCC_TOOLCHAIN),) +CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN) endif +KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) +KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) +KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,) +KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable) +KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier) +KBUILD_CFLAGS += $(call cc-disable-warning, gnu) +KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member) +# Quiet clang warning: comparison of unsigned expression < 0 is always false +KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare) +# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the +# source of a reference will be _MergedGlobals and not on of the whitelisted names. +# See modpost pattern 2 +KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,) +KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior) +KBUILD_CFLAGS += $(call cc-option, -no-integrated-as) +KBUILD_AFLAGS += $(call cc-option, -no-integrated-as) +else -ifeq ($(mixed-targets),1) -# =========================================================================== -# We're called with mixed targets (*config and build targets). -# Handle them one by one. - -PHONY += $(MAKECMDGOALS) __build_one_by_one - -$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one - @: - -__build_one_by_one: - $(Q)set -e; \ - for i in $(MAKECMDGOALS); do \ - $(MAKE) -f $(srctree)/Makefile $$i; \ - done +# These warnings generated too much noise in a regular build. +# Use make W=1 to enable them (see scripts/Makefile.extrawarn) +KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) +KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable) +endif -else ifeq ($(config-targets),1) # =========================================================================== # *config targets only - make sure prerequisites are updated, and descend @@ -552,6 +528,44 @@ else # Build targets only - this includes vmlinux, arch specific targets, clean # targets and others. In general all targets except *config targets. +# If building an external module we do not care about the all: rule +# but instead _all depend on modules +PHONY += all +ifeq ($(KBUILD_EXTMOD),) +_all: all +else +_all: modules +endif + +# Decide whether to build built-in, modular, or both. +# Normally, just do built-in. + +KBUILD_MODULES := +KBUILD_BUILTIN := 1 + +# If we have only "make modules", don't compile built-in objects. +# When we're building modules with modversions, we need to consider +# the built-in objects during the descend as well, in order to +# make sure the checksums are up to date before we record them. + +ifeq ($(MAKECMDGOALS),modules) + KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) +endif + +# If we have "make modules", compile modules +# in addition to whatever we do anyway. +# Just "make" or "make all" shall build modules as well + +ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) + KBUILD_MODULES := 1 +endif + +ifeq ($(MAKECMDGOALS),) + KBUILD_MODULES := 1 +endif + +export KBUILD_MODULES KBUILD_BUILTIN + ifeq ($(KBUILD_EXTMOD),) # Additional helpers built in scripts/ # Carefully list dependencies so we do not try to build scripts twice @@ -622,6 +636,11 @@ endif # Defaults to vmlinux, but the arch makefile usually adds further targets all: vmlinux +KBUILD_CFLAGS += $(call cc-option,-fno-PIE) +KBUILD_AFLAGS += $(call cc-option,-fno-PIE) +CFLAGS_GCOV := -fprofile-arcs -ftest-coverage -fno-tree-loop-im $(call cc-disable-warning,maybe-uninitialized,) +export CFLAGS_GCOV CFLAGS_KCOV + # The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default # values of the respective KBUILD_* variables ARCH_CPPFLAGS := @@ -653,11 +672,12 @@ KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, \ KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) # check for 'asm goto' -ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y) +ifeq ($(call shell-cached,$(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y) KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO endif +include scripts/Makefile.kcov include scripts/Makefile.gcc-plugins ifdef CONFIG_READABLE_ASM @@ -696,38 +716,6 @@ ifdef CONFIG_CC_STACKPROTECTOR endif KBUILD_CFLAGS += $(stackp-flag) -ifeq ($(cc-name),clang) -ifneq ($(CROSS_COMPILE),) -CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%)) -GCC_TOOLCHAIN := $(realpath $(dir $(shell which $(LD)))/..) -endif -ifneq ($(GCC_TOOLCHAIN),) -CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN) -endif -KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) -KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) -KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,) -KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable) -KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier) -KBUILD_CFLAGS += $(call cc-disable-warning, gnu) -KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member) -# Quiet clang warning: comparison of unsigned expression < 0 is always false -KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare) -# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the -# source of a reference will be _MergedGlobals and not on of the whitelisted names. -# See modpost pattern 2 -KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,) -KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior) -KBUILD_CFLAGS += $(call cc-option, -no-integrated-as) -KBUILD_AFLAGS += $(call cc-option, -no-integrated-as) -else - -# These warnings generated too much noise in a regular build. -# Use make W=1 to enable them (see scripts/Makefile.extrawarn) -KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) -KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable) -endif - ifdef CONFIG_FRAME_POINTER KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls else @@ -789,7 +777,7 @@ KBUILD_CFLAGS += $(call cc-option,-fdata-sections,) endif # arch Makefile may override CC so keep this after arch Makefile is included -NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) +NOSTDINC_FLAGS += -nostdinc -isystem $(call shell-cached,$(CC) -print-file-name=include) CHECKFLAGS += $(NOSTDINC_FLAGS) # warn about C99 declaration after statement @@ -801,6 +789,9 @@ KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign) # disable invalid "can't wrap" optimizations for signed / pointers KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow) +# Make sure -fstack-check isn't enabled (like gentoo apparently did) +KBUILD_CFLAGS += $(call cc-option,-fno-stack-check,) + # conserve stack if available KBUILD_CFLAGS += $(call cc-option,-fconserve-stack) @@ -1021,7 +1012,7 @@ $(sort $(vmlinux-deps)): $(vmlinux-dirs) ; PHONY += $(vmlinux-dirs) $(vmlinux-dirs): prepare scripts - $(Q)$(MAKE) $(build)=$@ + $(Q)$(MAKE) $(build)=$@ need-builtin=1 define filechk_kernel.release echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" @@ -1071,6 +1062,15 @@ prepare0: archprepare gcc-plugins # All the preparing.. prepare: prepare0 prepare-objtool +# Support for using generic headers in asm-generic +PHONY += asm-generic uapi-asm-generic +asm-generic: uapi-asm-generic + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ + src=asm obj=arch/$(SRCARCH)/include/generated/asm +uapi-asm-generic: + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ + src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm + PHONY += prepare-objtool prepare-objtool: $(objtool_target) @@ -1139,8 +1139,8 @@ headerdep: #Default location for installed headers export INSTALL_HDR_PATH = $(objtree)/usr -# If we do an all arch process set dst to include/arch-$(hdr-arch) -hdr-dst = $(if $(KBUILD_HEADERS), dst=include/arch-$(hdr-arch), dst=include) +# If we do an all arch process set dst to include/arch-$(SRCARCH) +hdr-dst = $(if $(KBUILD_HEADERS), dst=include/arch-$(SRCARCH), dst=include) PHONY += archheaders archheaders: @@ -1158,10 +1158,10 @@ headers_install_all: PHONY += headers_install headers_install: __headers - $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \ + $(if $(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/Kbuild),, \ $(error Headers not exportable for the $(SRCARCH) architecture)) $(Q)$(MAKE) $(hdr-inst)=include/uapi dst=include - $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi $(hdr-dst) + $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi $(hdr-dst) PHONY += headers_check_all headers_check_all: headers_install_all @@ -1170,7 +1170,7 @@ headers_check_all: headers_install_all PHONY += headers_check headers_check: headers_install $(Q)$(MAKE) $(hdr-inst)=include/uapi dst=include HDRCHECK=1 - $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi $(hdr-dst) HDRCHECK=1 + $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi $(hdr-dst) HDRCHECK=1 # --------------------------------------------------------------------------- # Kernel selftest @@ -1283,7 +1283,7 @@ CLEAN_DIRS += $(MODVERDIR) # Directories & files removed with 'make mrproper' MRPROPER_DIRS += include/config usr/include include/generated \ arch/*/include/generated .tmp_objdiff -MRPROPER_FILES += .config .config.old .version .old_version \ +MRPROPER_FILES += .config .config.old .version \ Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \ signing_key.pem signing_key.priv signing_key.x509 \ x509.genkey extra_certificates signing_key.x509.keyid \ @@ -1340,8 +1340,9 @@ package-dir := scripts/package $(Q)$(MAKE) $(build)=$(package-dir) $@ %pkg: include/config/kernel.release FORCE $(Q)$(MAKE) $(build)=$(package-dir) $@ -rpm: include/config/kernel.release FORCE - $(Q)$(MAKE) $(build)=$(package-dir) $@ +rpm: rpm-pkg + @echo " WARNING: \"rpm\" target will be removed after Linux 4.18" + @echo " Please use \"rpm-pkg\" instead." # Brief documentation of the typical targets used @@ -1393,7 +1394,7 @@ help: @echo ' export_report - List the usages of all exported symbols' @echo ' headers_check - Sanity check on exported headers' @echo ' headerdep - Detect inclusion cycles in headers' - @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help + @echo ' coccicheck - Check with Coccinelle' @echo '' @echo 'Kernel selftest:' @echo ' kselftest - Build and run kernel selftest (run as root)' @@ -1549,13 +1550,14 @@ clean: $(clean-dirs) $(call cmd,rmdirs) $(call cmd,rmfiles) @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ - \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ + \( -name '*.[aios]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '*.ko.*' -o -name '*.dtb' -o -name '*.dtb.S' \ - -o -name '*.dwo' \ + -o -name '*.dwo' -o -name '*.lst' \ -o -name '*.su' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ -o -name '*.symtypes' -o -name 'modules.order' \ -o -name modules.builtin -o -name '.tmp_*.o.*' \ + -o -name .cache.mk \ -o -name '*.c.[012]*.*' \ -o -name '*.ll' \ -o -name '*.gcno' \) -type f -print | xargs rm -f @@ -1702,8 +1704,7 @@ cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \ # read all saved command lines -targets := $(wildcard $(sort $(targets))) -cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) +cmd_files := $(wildcard .*.cmd $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd)) ifneq ($(cmd_files),) $(cmd_files): ; # Do not try to update included dependency files diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 69b875880754f5f54d7e4eeaa026c63bc283a894..b31b974a03cb1f4c88e4129da020cd4fa6ed249d 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -506,7 +506,7 @@ config ALPHA_QEMU Generic kernels will auto-detect QEMU. But when building a system-specific kernel, the assumption is that we want to - elimiate as many runtime tests as possible. + eliminate as many runtime tests as possible. If unsure, say N. diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h index fc988c16e8944c18ccc39338776d855ce7fb62e9..b9ec553519248ead670b69cd0a25b8f0882e8327 100644 --- a/arch/alpha/include/asm/pci.h +++ b/arch/alpha/include/asm/pci.h @@ -13,9 +13,6 @@ * The following structure is used to manage multiple PCI busses. */ -struct pci_dev; -struct pci_bus; -struct resource; struct pci_iommu_arena; struct page; @@ -57,8 +54,6 @@ struct pci_controller { #define PCIBIOS_MIN_IO alpha_mv.min_io_address #define PCIBIOS_MIN_MEM alpha_mv.min_mem_address -extern void pcibios_set_master(struct pci_dev *dev); - /* IOMMU controls. */ /* The PCI address space does not equal the physical memory address space. diff --git a/arch/alpha/include/uapi/asm/Kbuild b/arch/alpha/include/uapi/asm/Kbuild index b15bf6bc0e94f46f035e8781ffa921060341fe91..14a2e9af97e9992d87821e8f11276ecfef8e57cf 100644 --- a/arch/alpha/include/uapi/asm/Kbuild +++ b/arch/alpha/include/uapi/asm/Kbuild @@ -1,2 +1,4 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm + +generic-y += bpf_perf_event.h diff --git a/arch/alpha/include/uapi/asm/mman.h b/arch/alpha/include/uapi/asm/mman.h index 6bf730063e3f00105ace8c911aa9dc65cd54649f..2dbdf59258d9765c5ad5f336635c0fd05e1cb24b 100644 --- a/arch/alpha/include/uapi/asm/mman.h +++ b/arch/alpha/include/uapi/asm/mman.h @@ -12,6 +12,7 @@ #define MAP_SHARED 0x01 /* Share changes */ #define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_SHARED_VALIDATE 0x03 /* share + validate extension flags */ #define MAP_TYPE 0x0f /* Mask for type of mapping (OSF/1 is _wrong_) */ #define MAP_FIXED 0x100 /* Interpret addr exactly */ #define MAP_ANONYMOUS 0x10 /* don't use a file */ diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 08235bb1f0356405716a22a84cd845fcf18db17f..87da0057994665e5d9594388ff1d451964f98ccc 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -197,9 +197,16 @@ pcibios_init(void) subsys_initcall(pcibios_init); #ifdef ALPHA_RESTORE_SRM_SETUP +/* Store PCI device configuration left by SRM here. */ +struct pdev_srm_saved_conf +{ + struct pdev_srm_saved_conf *next; + struct pci_dev *dev; +}; + static struct pdev_srm_saved_conf *srm_saved_configs; -void pdev_save_srm_config(struct pci_dev *dev) +static void pdev_save_srm_config(struct pci_dev *dev) { struct pdev_srm_saved_conf *tmp; static int printed = 0; @@ -239,6 +246,8 @@ pci_restore_srm_config(void) pci_restore_state(tmp->dev); } } +#else +#define pdev_save_srm_config(dev) do {} while (0) #endif void pcibios_fixup_bus(struct pci_bus *bus) diff --git a/arch/alpha/kernel/pci_impl.h b/arch/alpha/kernel/pci_impl.h index 26231601630ed7a9d0dca38e52fa2bb18910a526..2e4cb74fdc416b94a776b0f6982f266bebcff47b 100644 --- a/arch/alpha/kernel/pci_impl.h +++ b/arch/alpha/kernel/pci_impl.h @@ -157,16 +157,8 @@ struct pci_iommu_arena #endif #ifdef ALPHA_RESTORE_SRM_SETUP -/* Store PCI device configuration left by SRM here. */ -struct pdev_srm_saved_conf -{ - struct pdev_srm_saved_conf *next; - struct pci_dev *dev; -}; - extern void pci_restore_srm_config(void); #else -#define pdev_save_srm_config(dev) do {} while (0) #define pci_restore_srm_config() do {} while (0) #endif diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c index 5da0aec8ce904d1bacc7a4811bcb5b17f3276fcf..438b10c44d732355888e856668fc09c5a9685e85 100644 --- a/arch/alpha/kernel/srmcons.c +++ b/arch/alpha/kernel/srmcons.c @@ -65,9 +65,9 @@ srmcons_do_receive_chars(struct tty_port *port) } static void -srmcons_receive_chars(unsigned long data) +srmcons_receive_chars(struct timer_list *t) { - struct srmcons_private *srmconsp = (struct srmcons_private *)data; + struct srmcons_private *srmconsp = from_timer(srmconsp, t, timer); struct tty_port *port = &srmconsp->port; unsigned long flags; int incr = 10; @@ -206,8 +206,7 @@ static const struct tty_operations srmcons_ops = { static int __init srmcons_init(void) { - setup_timer(&srmcons_singleton.timer, srmcons_receive_chars, - (unsigned long)&srmcons_singleton); + timer_setup(&srmcons_singleton.timer, srmcons_receive_chars, 0); if (srm_is_registered_console) { struct tty_driver *driver; int err; diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index c84e67fdea095cbed225edac052f4ce07007abb9..9d5fd00d9e91bf0caa066bc0597475723a014328 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -39,7 +39,7 @@ config ARC select OF select OF_EARLY_FLATTREE select OF_RESERVED_MEM - select PERF_USE_VMALLOC + select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING select HAVE_DEBUG_STACKOVERFLOW select HAVE_GENERIC_DMA_COHERENT select HAVE_KERNEL_GZIP @@ -298,7 +298,7 @@ config ARC_MMU_V1 config ARC_MMU_V2 bool "MMU v2" help - Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio + Fixed the deficiency of v1 - possible thrashing in memcpy scenario when 2 D-TLB and 1 I-TLB entries index into same 2way set. config ARC_MMU_V3 @@ -371,7 +371,7 @@ config ARC_FPU_SAVE_RESTORE bool "Enable FPU state persistence across context switch" default n help - Double Precision Floating Point unit had dedictaed regs which + Double Precision Floating Point unit had dedicated regs which need to be saved/restored across context-switch. Note that ARC FPU is overly simplistic, unlike say x86, which has hardware pieces to allow software to conditionally save/restore, @@ -467,7 +467,7 @@ config ARC_PLAT_NEEDS_PHYS_TO_DMA bool config ARC_KVADDR_SIZE - int "Kernel Virtaul Address Space size (MB)" + int "Kernel Virtual Address Space size (MB)" range 0 512 default "256" help diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi index e114000a84f56c9e07ddd3a2e623c4dfeb3df6a2..74d070cd3c13a723fef1a2b3cd91cd2919392762 100644 --- a/arch/arc/boot/dts/axs10x_mb.dtsi +++ b/arch/arc/boot/dts/axs10x_mb.dtsi @@ -16,6 +16,12 @@ ranges = <0x00000000 0x0 0xe0000000 0x10000000>; interrupt-parent = <&mb_intc>; + creg_rst: reset-controller@11220 { + compatible = "snps,axs10x-reset"; + #reset-cells = <1>; + reg = <0x11220 0x4>; + }; + i2sclk: i2sclk@100a0 { compatible = "snps,axs10x-i2s-pll-clock"; reg = <0x100a0 0x10>; @@ -73,6 +79,8 @@ clocks = <&apbclk>; clock-names = "stmmaceth"; max-speed = <100>; + resets = <&creg_rst 5>; + reset-names = "stmmaceth"; }; ehci@0x40000 { diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index b1c56d35f2a938e59c9677454499aeecb1da4f7e..49bfbd879caa6ffa08553e9b0f49b542739bb95b 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h @@ -11,12 +11,14 @@ /* Build Configuration Registers */ #define ARC_REG_AUX_DCCM 0x18 /* DCCM Base Addr ARCv2 */ +#define ARC_REG_ERP_CTRL 0x3F /* ARCv2 Error protection control */ #define ARC_REG_DCCM_BASE_BUILD 0x61 /* DCCM Base Addr ARCompact */ #define ARC_REG_CRC_BCR 0x62 #define ARC_REG_VECBASE_BCR 0x68 #define ARC_REG_PERIBASE_BCR 0x69 #define ARC_REG_FP_BCR 0x6B /* ARCompact: Single-Precision FPU */ #define ARC_REG_DPFP_BCR 0x6C /* ARCompact: Dbl Precision FPU */ +#define ARC_REG_ERP_BUILD 0xc7 /* ARCv2 Error protection Build: ECC/Parity */ #define ARC_REG_FP_V2_BCR 0xc8 /* ARCv2 FPU */ #define ARC_REG_SLC_BCR 0xce #define ARC_REG_DCCM_BUILD 0x74 /* DCCM size (common) */ @@ -32,11 +34,14 @@ #define ARC_REG_D_UNCACH_BCR 0x6A #define ARC_REG_BPU_BCR 0xc0 #define ARC_REG_ISA_CFG_BCR 0xc1 +#define ARC_REG_LPB_BUILD 0xE9 /* ARCv2 Loop Buffer Build */ #define ARC_REG_RTT_BCR 0xF2 #define ARC_REG_IRQ_BCR 0xF3 +#define ARC_REG_MICRO_ARCH_BCR 0xF9 /* ARCv2 Product revision */ #define ARC_REG_SMART_BCR 0xFF #define ARC_REG_CLUSTER_BCR 0xcf #define ARC_REG_AUX_ICCM 0x208 /* ICCM Base Addr (ARCv2) */ +#define ARC_REG_LPB_CTRL 0x488 /* ARCv2 Loop Buffer control */ /* Common for ARCompact and ARCv2 status register */ #define ARC_REG_STATUS32 0x0A @@ -229,6 +234,32 @@ struct bcr_bpu_arcv2 { #endif }; +/* Error Protection Build: ECC/Parity */ +struct bcr_erp { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad3:5, mmu:3, pad2:4, ic:3, dc:3, pad1:6, ver:8; +#else + unsigned int ver:8, pad1:6, dc:3, ic:3, pad2:4, mmu:3, pad3:5; +#endif +}; + +/* Error Protection Control */ +struct ctl_erp { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad2:27, mpd:1, pad1:2, dpd:1, dpi:1; +#else + unsigned int dpi:1, dpd:1, pad1:2, mpd:1, pad2:27; +#endif +}; + +struct bcr_lpb { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:16, entries:8, ver:8; +#else + unsigned int ver:8, entries:8, pad:16; +#endif +}; + struct bcr_generic { #ifdef CONFIG_CPU_BIG_ENDIAN unsigned int info:24, ver:8; @@ -270,7 +301,7 @@ struct cpuinfo_arc { struct cpuinfo_arc_ccm iccm, dccm; struct { unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2, - fpu_sp:1, fpu_dp:1, dual_iss_enb:1, dual_iss_exist:1, pad2:4, + fpu_sp:1, fpu_dp:1, dual:1, dual_enb:1, pad2:4, debug:1, ap:1, smart:1, rtt:1, pad3:4, timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4; } extn; diff --git a/arch/arc/include/uapi/asm/Kbuild b/arch/arc/include/uapi/asm/Kbuild index fa6d0ff4ff894be699616eefad77cd6a2347a3b7..170b5db64afeb7f74fb8279887a7cb75e0205c7b 100644 --- a/arch/arc/include/uapi/asm/Kbuild +++ b/arch/arc/include/uapi/asm/Kbuild @@ -3,6 +3,7 @@ include include/uapi/asm-generic/Kbuild.asm generic-y += auxvec.h generic-y += bitsperlong.h +generic-y += bpf_perf_event.h generic-y += errno.h generic-y += fcntl.h generic-y += ioctl.h diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c index 2ce24e74f87956af0bba1d9430200196353bdff8..8aec462d90fbe8f0aa88847272d02004a863f2db 100644 --- a/arch/arc/kernel/perf_event.c +++ b/arch/arc/kernel/perf_event.c @@ -336,15 +336,12 @@ static int arc_pmu_add(struct perf_event *event, int flags) struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; - if (__test_and_set_bit(idx, pmu_cpu->used_mask)) { - idx = find_first_zero_bit(pmu_cpu->used_mask, - arc_pmu->n_counters); - if (idx == arc_pmu->n_counters) - return -EAGAIN; - - __set_bit(idx, pmu_cpu->used_mask); - hwc->idx = idx; - } + idx = ffz(pmu_cpu->used_mask[0]); + if (idx == arc_pmu->n_counters) + return -EAGAIN; + + __set_bit(idx, pmu_cpu->used_mask); + hwc->idx = idx; write_aux_reg(ARC_REG_PCT_INDEX, idx); @@ -377,21 +374,22 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev) struct perf_sample_data data; struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu); struct pt_regs *regs; - int active_ints; + unsigned int active_ints; int idx; arc_pmu_disable(&arc_pmu->pmu); active_ints = read_aux_reg(ARC_REG_PCT_INT_ACT); + if (!active_ints) + goto done; regs = get_irq_regs(); - for (idx = 0; idx < arc_pmu->n_counters; idx++) { - struct perf_event *event = pmu_cpu->act_counter[idx]; + do { + struct perf_event *event; struct hw_perf_event *hwc; - if (!(active_ints & (1 << idx))) - continue; + idx = __ffs(active_ints); /* Reset interrupt flag by writing of 1 */ write_aux_reg(ARC_REG_PCT_INT_ACT, 1 << idx); @@ -404,19 +402,22 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev) write_aux_reg(ARC_REG_PCT_INT_CTRL, read_aux_reg(ARC_REG_PCT_INT_CTRL) | (1 << idx)); + event = pmu_cpu->act_counter[idx]; hwc = &event->hw; WARN_ON_ONCE(hwc->idx != idx); arc_perf_event_update(event, &event->hw, event->hw.idx); perf_sample_data_init(&data, 0, hwc->last_period); - if (!arc_pmu_event_set_period(event)) - continue; + if (arc_pmu_event_set_period(event)) { + if (perf_event_overflow(event, &data, regs)) + arc_pmu_stop(event, 0); + } - if (perf_event_overflow(event, &data, regs)) - arc_pmu_stop(event, 0); - } + active_ints &= ~(1U << idx); + } while (active_ints); +done: arc_pmu_enable(&arc_pmu->pmu); return IRQ_HANDLED; @@ -461,6 +462,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev) pr_err("This core does not have performance counters!\n"); return -ENODEV; } + BUILD_BUG_ON(ARC_PERF_MAX_COUNTERS > 32); BUG_ON(pct_bcr.c > ARC_PERF_MAX_COUNTERS); READ_BCR(ARC_REG_CC_BUILD, cc_bcr); diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index fb83844daeea3550aacd27de2525711a6aa5fddc..7ef7d9a8ff89231811e73a241a3a3c6d248e720b 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -199,8 +199,10 @@ static void read_arc_build_cfg_regs(void) unsigned int exec_ctrl; READ_BCR(AUX_EXEC_CTRL, exec_ctrl); - cpu->extn.dual_iss_exist = 1; - cpu->extn.dual_iss_enb = exec_ctrl & 1; + cpu->extn.dual_enb = exec_ctrl & 1; + + /* dual issue always present for this core */ + cpu->extn.dual = 1; } } @@ -253,7 +255,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len) cpu_id, cpu->name, cpu->details, is_isa_arcompact() ? "ARCompact" : "ARCv2", IS_AVAIL1(cpu->isa.be, "[Big-Endian]"), - IS_AVAIL3(cpu->extn.dual_iss_exist, cpu->extn.dual_iss_enb, " Dual-Issue")); + IS_AVAIL3(cpu->extn.dual, cpu->extn.dual_enb, " Dual-Issue ")); n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s%s%s\nISA Extn\t: ", IS_AVAIL1(cpu->extn.timer0, "Timer0 "), @@ -293,11 +295,26 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len) if (cpu->bpu.ver) n += scnprintf(buf + n, len - n, - "BPU\t\t: %s%s match, cache:%d, Predict Table:%d\n", + "BPU\t\t: %s%s match, cache:%d, Predict Table:%d", IS_AVAIL1(cpu->bpu.full, "full"), IS_AVAIL1(!cpu->bpu.full, "partial"), cpu->bpu.num_cache, cpu->bpu.num_pred); + if (is_isa_arcv2()) { + struct bcr_lpb lpb; + + READ_BCR(ARC_REG_LPB_BUILD, lpb); + if (lpb.ver) { + unsigned int ctl; + ctl = read_aux_reg(ARC_REG_LPB_CTRL); + + n += scnprintf(buf + n, len - n, " Loop Buffer:%d %s", + lpb.entries, + IS_DISABLED_RUN(!ctl)); + } + } + + n += scnprintf(buf + n, len - n, "\n"); return buf; } @@ -326,6 +343,24 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len) cpu->dccm.base_addr, TO_KB(cpu->dccm.sz), cpu->iccm.base_addr, TO_KB(cpu->iccm.sz)); + if (is_isa_arcv2()) { + + /* Error Protection: ECC/Parity */ + struct bcr_erp erp; + READ_BCR(ARC_REG_ERP_BUILD, erp); + + if (erp.ver) { + struct ctl_erp ctl; + READ_BCR(ARC_REG_ERP_CTRL, ctl); + + /* inverted bits: 0 means enabled */ + n += scnprintf(buf + n, len - n, "Extn [ECC]\t: %s%s%s%s%s%s\n", + IS_AVAIL3(erp.ic, !ctl.dpi, "IC "), + IS_AVAIL3(erp.dc, !ctl.dpd, "DC "), + IS_AVAIL3(erp.mmu, !ctl.mpd, "MMU ")); + } + } + n += scnprintf(buf + n, len - n, "OS ABI [v%d]\t: %s\n", EF_ARC_OSABI_CURRENT >> 8, EF_ARC_OSABI_CURRENT == EF_ARC_OSABI_V3 ? diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 8ceefbf72fb0f8b0d1ce9ca1516bb7edd487cc9a..4097764fea23499a828a559f70a62a29daba14c8 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -762,21 +762,23 @@ void read_decode_mmu_bcr(void) tmp = read_aux_reg(ARC_REG_MMU_BCR); mmu->ver = (tmp >> 24); - if (mmu->ver <= 2) { - mmu2 = (struct bcr_mmu_1_2 *)&tmp; - mmu->pg_sz_k = TO_KB(0x2000); - mmu->sets = 1 << mmu2->sets; - mmu->ways = 1 << mmu2->ways; - mmu->u_dtlb = mmu2->u_dtlb; - mmu->u_itlb = mmu2->u_itlb; - } else if (mmu->ver == 3) { - mmu3 = (struct bcr_mmu_3 *)&tmp; - mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1); - mmu->sets = 1 << mmu3->sets; - mmu->ways = 1 << mmu3->ways; - mmu->u_dtlb = mmu3->u_dtlb; - mmu->u_itlb = mmu3->u_itlb; - mmu->sasid = mmu3->sasid; + if (is_isa_arcompact()) { + if (mmu->ver <= 2) { + mmu2 = (struct bcr_mmu_1_2 *)&tmp; + mmu->pg_sz_k = TO_KB(0x2000); + mmu->sets = 1 << mmu2->sets; + mmu->ways = 1 << mmu2->ways; + mmu->u_dtlb = mmu2->u_dtlb; + mmu->u_itlb = mmu2->u_itlb; + } else { + mmu3 = (struct bcr_mmu_3 *)&tmp; + mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1); + mmu->sets = 1 << mmu3->sets; + mmu->ways = 1 << mmu3->ways; + mmu->u_dtlb = mmu3->u_dtlb; + mmu->u_itlb = mmu3->u_itlb; + mmu->sasid = mmu3->sasid; + } } else { mmu4 = (struct bcr_mmu_4 *)&tmp; mmu->pg_sz_k = 1 << (mmu4->sz0 - 1); @@ -818,8 +820,9 @@ int pae40_exist_but_not_enab(void) void arc_mmu_init(void) { - char str[256]; struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu; + char str[256]; + int compat = 0; pr_info("%s", arc_mmu_mumbojumbo(0, str, sizeof(str))); @@ -834,15 +837,21 @@ void arc_mmu_init(void) */ BUILD_BUG_ON(!IS_ALIGNED(STACK_TOP, PMD_SIZE)); - /* For efficiency sake, kernel is compile time built for a MMU ver - * This must match the hardware it is running on. - * Linux built for MMU V2, if run on MMU V1 will break down because V1 - * hardware doesn't understand cmds such as WriteNI, or IVUTLB - * On the other hand, Linux built for V1 if run on MMU V2 will do - * un-needed workarounds to prevent memcpy thrashing. - * Similarly MMU V3 has new features which won't work on older MMU + /* + * Ensure that MMU features assumed by kernel exist in hardware. + * For older ARC700 cpus, it has to be exact match, since the MMU + * revisions were not backwards compatible (MMUv3 TLB layout changed + * so even if kernel for v2 didn't use any new cmds of v3, it would + * still not work. + * For HS cpus, MMUv4 was baseline and v5 is backwards compatible + * (will run older software). */ - if (mmu->ver != CONFIG_ARC_MMU_VER) { + if (is_isa_arcompact() && mmu->ver == CONFIG_ARC_MMU_VER) + compat = 1; + else if (is_isa_arcv2() && mmu->ver >= CONFIG_ARC_MMU_VER) + compat = 1; + + if (!compat) { panic("MMU ver %d doesn't match kernel built for %d...\n", mmu->ver, CONFIG_ARC_MMU_VER); } diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig index c54d1ae57fe0b3feffd4578387f11593c45308e4..4e0df7b7a248147af495948e95488a67e0b78499 100644 --- a/arch/arc/plat-axs10x/Kconfig +++ b/arch/arc/plat-axs10x/Kconfig @@ -14,6 +14,8 @@ menuconfig ARC_PLAT_AXS10X select MIGHT_HAVE_PCI select GENERIC_IRQ_CHIP select GPIOLIB + select AXS101 if ISA_ARCOMPACT + select AXS103 if ISA_ARCV2 help Support for the ARC AXS10x Software Development Platforms. diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c index cf14ebc36916a2a0eca39728c0cc0f315d58bbeb..f1ac6790da5fe64782b59b720bf3ea80d999bff1 100644 --- a/arch/arc/plat-axs10x/axs10x.c +++ b/arch/arc/plat-axs10x/axs10x.c @@ -111,13 +111,6 @@ static void __init axs10x_early_init(void) axs10x_enable_gpio_intc_wire(); - /* - * Reset ethernet IP core. - * TODO: get rid of this quirk after axs10x reset driver (or simple - * reset driver) will be available in upstream. - */ - iowrite32((1 << 5), (void __iomem *) CREG_MB_SW_RESET); - scnprintf(mb, 32, "MainBoard v%d", mb_rev); axs10x_print_board_ver(CREG_MB_VER, mb); } diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d1346a16076033acb8d3d60e5de846d7ee2e0e3b..51c8df5610777459c727e30cc65ef6fe7aa41b66 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -3,6 +3,7 @@ config ARM bool default y select ARCH_CLOCKSOURCE_DATA + select ARCH_DISCARD_MEMBLOCK if !HAVE_ARCH_PFN_VALID select ARCH_HAS_DEBUG_VIRTUAL select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ELF_RANDOMIZE @@ -240,15 +241,6 @@ config NEED_RET_TO_USER config ARCH_MTD_XIP bool -config VECTORS_BASE - hex - default 0xffff0000 if MMU || CPU_HIGH_VECTOR - default DRAM_BASE if REMAP_VECTORS_TO_RAM - default 0x00000000 - help - The base address of exception vectors. This must be two pages - in size. - config ARM_PATCH_PHYS_VIRT bool "Patch physical to virtual translations at runtime" if EMBEDDED default y @@ -379,7 +371,7 @@ config ARCH_EBSA110 config ARCH_EP93XX bool "EP93xx-based" - select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_SPARSEMEM_ENABLE select ARM_AMBA imply ARM_PATCH_PHYS_VIRT select ARM_VIC @@ -2006,6 +1998,17 @@ config XIP_PHYS_ADDR be linked for and stored to. This address is dependent on your own flash usage. +config XIP_DEFLATED_DATA + bool "Store kernel .data section compressed in ROM" + depends on XIP_KERNEL + select ZLIB_INFLATE + help + Before the kernel is actually executed, its .data section has to be + copied to RAM from ROM. This option allows for storing that data + in compressed form and decompressed to RAM rather than merely being + copied, saving some precious ROM space. A possible drawback is a + slightly longer boot delay. + config KEXEC bool "Kexec system call (EXPERIMENTAL)" depends on (!SMP || PM_SLEEP_SMP) diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index 22f34c423be68a92b6435c6f0ebd2766d4de4380..1168a03c85255fbe7295c0fad7f77fb7d2e9b2af 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -53,8 +53,8 @@ config REMAP_VECTORS_TO_RAM config ARM_MPU bool 'Use the ARM v7 PMSA Compliant MPU' - depends on CPU_V7 - default y + depends on CPU_V7 || CPU_V7M + default y if CPU_V7 help Some ARM systems without an MMU have instead a Memory Protection Unit (MPU) that defines the type and permissions for regions of diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 954ba8b810521296e5fb6e1800deab756aa41c12..17685e19aed8e4792699613eb2df95525b1aca47 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -170,6 +170,11 @@ choice depends on ARCH_BCM_5301X || ARCH_BCM_NSP select DEBUG_UART_8250 + config DEBUG_BCM_HR2 + bool "Kernel low-level debugging on Hurricane 2 UART2" + depends on ARCH_BCM_HR2 + select DEBUG_UART_8250 + config DEBUG_BCM_KONA_UART bool "Kernel low-level debugging messages via BCM KONA UART" depends on ARCH_BCM_MOBILE @@ -912,6 +917,13 @@ choice Say Y here if you want kernel low-level debugging support via SCIF2 on Renesas R-Car E2 (R8A7794). + config DEBUG_RCAR_GEN2_SCIF4 + bool "Kernel low-level debugging messages via SCIF4 on R8A7745" + depends on ARCH_R8A7745 + help + Say Y here if you want kernel low-level debugging support + via SCIF4 on Renesas RZ/G1E (R8A7745). + config DEBUG_RMOBILE_SCIFA0 bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4" depends on ARCH_R8A73A4 @@ -1452,6 +1464,7 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 @@ -1509,6 +1522,7 @@ config DEBUG_UART_PHYS default 0x11009000 if DEBUG_MT8135_UART3 default 0x16000000 if DEBUG_INTEGRATOR default 0x18000300 if DEBUG_BCM_5301X + default 0x18000400 if DEBUG_BCM_HR2 default 0x18010000 if DEBUG_SIRFATLAS7_UART0 default 0x18020000 if DEBUG_SIRFATLAS7_UART1 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 @@ -1571,6 +1585,7 @@ config DEBUG_UART_PHYS default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4 default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2 default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0 + default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4 default 0xe8008000 if DEBUG_R7S72100_SCIF2 default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE @@ -1605,6 +1620,7 @@ config DEBUG_UART_PHYS DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ + DEBUG_RCAR_GEN2_SCIF4 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ DEBUG_S3C64XX_UART || \ @@ -1624,6 +1640,7 @@ config DEBUG_UART_VIRT default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 default 0xf1000300 if DEBUG_BCM_5301X + default 0xf1000400 if DEBUG_BCM_HR2 default 0xf1002000 if DEBUG_MT8127_UART0 default 0xf1006000 if DEBUG_MT6589_UART0 default 0xf1009000 if DEBUG_MT8135_UART3 @@ -1729,7 +1746,8 @@ config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \ - DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3 + DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \ + DEBUG_OMAP7XXUART3 default 2 config DEBUG_UART_8250_WORD @@ -1758,9 +1776,9 @@ config DEBUG_UART_8250_FLOW_CONTROL default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC config DEBUG_UNCOMPRESS - bool + bool "Enable decompressor debugging via DEBUG_LL output" depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M - default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ + depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \ !DEBUG_BRCMSTB_UART help diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 36ae4454554ce1a11cc65848c60569bf8b3e0abe..80351e505fd57aeb0413a80e61214e341a3e2f48 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -16,11 +16,11 @@ LDFLAGS := LDFLAGS_vmlinux :=-p --no-undefined -X --pic-veneer ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 -LDFLAGS_MODULE += --be8 +KBUILD_LDFLAGS_MODULE += --be8 endif ifeq ($(CONFIG_ARM_MODULE_PLTS),y) -LDFLAGS_MODULE += -T $(srctree)/arch/arm/kernel/module.lds +KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/arm/kernel/module.lds endif GZFLAGS :=-9 @@ -122,7 +122,7 @@ CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb # Work around buggy relocation from gas if requested: ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y) -CFLAGS_MODULE +=-fno-optimize-sibling-calls +KBUILD_CFLAGS_MODULE +=-fno-optimize-sibling-calls endif else CFLAGS_ISA :=$(call cc-option,-marm,) @@ -149,6 +149,7 @@ textofs-$(CONFIG_SA1111) := 0x00208000 endif textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 +textofs-$(CONFIG_ARCH_MESON) := 0x00208000 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 # Machine directory name. This list is sorted alphanumerically diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 50f8d1be7fcbe7cdcecb37f54f2b24f514a65974..a3af4dc08c3e94a67ef0c06d8f9402ca1910f420 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -31,8 +31,19 @@ targets := Image zImage xipImage bootpImage uImage ifeq ($(CONFIG_XIP_KERNEL),y) +cmd_deflate_xip_data = $(CONFIG_SHELL) -c \ + '$(srctree)/$(src)/deflate_xip_data.sh $< $@ || { rm -f $@; false; }' + +ifeq ($(CONFIG_XIP_DEFLATED_DATA),y) +quiet_cmd_mkxip = XIPZ $@ +cmd_mkxip = $(cmd_objcopy) && $(cmd_deflate_xip_data) +else +quiet_cmd_mkxip = $(quiet_cmd_objcopy) +cmd_mkxip = $(cmd_objcopy) +endif + $(obj)/xipImage: vmlinux FORCE - $(call if_changed,objcopy) + $(call if_changed,mkxip) @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)' $(obj)/Image $(obj)/zImage: FORCE diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index a5889238fc9fc6fe6f3c2dc1b2c7e172fc597594..45a6b9b7af2a56f179427d353ad70c3cd920bb69 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -117,8 +117,11 @@ ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) asflags-y := -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. -KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \ - awk 'END{print $$3}') +KBSS_SZ = $(shell $(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \ + perl -e 'while (<>) { \ + $$bss_start=hex($$1) if /^([[:xdigit:]]+) B __bss_start$$/; \ + $$bss_end=hex($$1) if /^([[:xdigit:]]+) B __bss_stop$$/; \ + }; printf "%d\n", $$bss_end - $$bss_start;') LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ) # Supply ZRELADDR to the decompressor via a linker symbol. ifneq ($(CONFIG_AUTO_ZRELADDR),y) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 8a756870c238435af684215c653f54a739f4f1a5..45c8823c37503d3bfdc2beee80304c556db8bf53 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -143,6 +143,8 @@ start: .word _magic_start @ absolute load/run zImage address .word _magic_end @ zImage end address .word 0x04030201 @ endianness flag + .word 0x45454545 @ another magic number to indicate + .word _magic_table @ additional data table __EFI_HEADER 1: diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S index 7d06aa19c3e6b5664c0e17a4de826b0810e78730..e6bf6774c4bb9903436469ad2ef8a0d97039730a 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.S +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -44,12 +44,22 @@ SECTIONS *(.glue_7t) *(.glue_7) } + .table : ALIGN(4) { + _table_start = .; + LONG(ZIMAGE_MAGIC(2)) + LONG(ZIMAGE_MAGIC(0x5a534c4b)) + LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start)) + LONG(ZIMAGE_MAGIC(_kernel_bss_size)) + LONG(0) + _table_end = .; + } .rodata : { *(.rodata) *(.rodata.*) } .piggydata : { *(.piggydata) + __piggy_size_addr = . - 4; } . = ALIGN(4); @@ -97,6 +107,7 @@ SECTIONS _magic_sig = ZIMAGE_MAGIC(0x016f2818); _magic_start = ZIMAGE_MAGIC(_start); _magic_end = ZIMAGE_MAGIC(_edata); + _magic_table = ZIMAGE_MAGIC(_table_start - _start); . = BSS_START; __bss_start = .; diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh new file mode 100755 index 0000000000000000000000000000000000000000..1189598a25ebb01dc13fbb03a510f0750d709398 --- /dev/null +++ b/arch/arm/boot/deflate_xip_data.sh @@ -0,0 +1,64 @@ +#!/bin/sh + +# XIP kernel .data segment compressor +# +# Created by: Nicolas Pitre, August 2017 +# Copyright: (C) 2017 Linaro Limited +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. + +# This script locates the start of the .data section in xipImage and +# substitutes it with a compressed version. The needed offsets are obtained +# from symbol addresses in vmlinux. It is expected that .data extends to +# the end of xipImage. + +set -e + +VMLINUX="$1" +XIPIMAGE="$2" + +DD="dd status=none" + +# Use "make V=1" to debug this script. +case "$KBUILD_VERBOSE" in +*1*) + set -x + ;; +esac + +sym_val() { + # extract hex value for symbol in $1 + local val=$($NM "$VMLINUX" | sed -n "/ $1$/{s/ .*$//p;q}") + [ "$val" ] || { echo "can't find $1 in $VMLINUX" 1>&2; exit 1; } + # convert from hex to decimal + echo $((0x$val)) +} + +__data_loc=$(sym_val __data_loc) +_edata_loc=$(sym_val _edata_loc) +base_offset=$(sym_val _xiprom) + +# convert to file based offsets +data_start=$(($__data_loc - $base_offset)) +data_end=$(($_edata_loc - $base_offset)) + +# Make sure data occupies the last part of the file. +file_end=$(stat -c "%s" "$XIPIMAGE") +if [ "$file_end" != "$data_end" ]; then + printf "end of xipImage doesn't match with _edata_loc (%#x vs %#x)\n" \ + $(($file_end + $base_offset)) $_edata_loc 2>&1 + exit 1; +fi + +# be ready to clean up +trap 'rm -f "$XIPIMAGE.tmp"' 0 1 2 3 + +# substitute the data section by a compressed version +$DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp" +$DD if="$XIPIMAGE" skip=$data_start iflag=skip_bytes | +gzip -9 >> "$XIPIMAGE.tmp" + +# replace kernel binary +mv -f "$XIPIMAGE.tmp" "$XIPIMAGE" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 25dcf4e534e6c18177ed38054eb1aaf22773ccbe..d0381e9caf216bdbb6a398374551ef6411830901 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -101,6 +101,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-tplink-archer-c9-v1.dtb \ bcm47094-dlink-dir-885l.dtb \ bcm47094-linksys-panamera.dtb \ + bcm47094-luxul-abr-4500.dtb \ + bcm47094-luxul-xbr-4500.dtb \ bcm47094-luxul-xwr-3100.dtb \ bcm47094-netgear-r8500.dtb \ bcm94708.dtb \ @@ -109,6 +111,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm953012hr.dtb \ bcm953012k.dtb dtb-$(CONFIG_ARCH_BCM_53573) += \ + bcm47189-luxul-xap-1440.dtb \ + bcm47189-luxul-xap-810.dtb \ bcm47189-tenda-ac9.dtb \ bcm947189acdbmr.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ @@ -118,6 +122,8 @@ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ bcm911360k.dtb \ bcm958300k.dtb \ bcm958305k.dtb +dtb-$(CONFIG_ARCH_BCM_HR2) += \ + bcm53340-ubnt-unifi-switch8.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm28155-ap.dtb \ bcm21664-garnet.dtb \ @@ -177,6 +183,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ + exynos5422-odroidhc1.dtb \ exynos5422-odroidxu3.dtb \ exynos5422-odroidxu3-lite.dtb \ exynos5422-odroidxu4.dtb \ @@ -342,12 +349,14 @@ dtb-$(CONFIG_SOC_IMX51) += \ imx51-babbage.dtb \ imx51-digi-connectcore-jsk.dtb \ imx51-eukrea-mbimxsd51-baseboard.dtb \ - imx51-ts4800.dtb + imx51-ts4800.dtb \ + imx51-zii-rdu1.dtb dtb-$(CONFIG_SOC_IMX53) += \ imx53-ard.dtb \ imx53-cx9020.dtb \ imx53-m53evk.dtb \ imx53-mba53.dtb \ + imx53-ppd.dtb \ imx53-qsb.dtb \ imx53-qsrb.dtb \ imx53-smd.dtb \ @@ -389,14 +398,19 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-ts4900.dtb \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6s-8034.dtb \ + imx6dl-tx6s-8034-mb7.dtb \ imx6dl-tx6s-8035.dtb \ + imx6dl-tx6s-8035-mb7.dtb \ imx6dl-tx6u-801x.dtb \ + imx6dl-tx6u-80xx-mb7.dtb \ imx6dl-tx6u-8033.dtb \ + imx6dl-tx6u-8033-mb7.dtb \ imx6dl-tx6u-811x.dtb \ imx6dl-tx6u-81xx-mb7.dtb \ imx6dl-udoo.dtb \ imx6dl-wandboard.dtb \ imx6dl-wandboard-revb1.dtb \ + imx6dl-wandboard-revd1.dtb \ imx6q-apalis-eval.dtb \ imx6q-apalis-ixora.dtb \ imx6q-apalis-ixora-v1.1.dtb \ @@ -408,6 +422,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ imx6q-dfi-fs700-m60.dtb \ + imx6q-display5-tianma-tm070-1280x768.dtb \ imx6q-dmo-edmqmx6.dtb \ imx6q-evi.dtb \ imx6q-gk802.dtb \ @@ -435,6 +450,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-nitrogen6_som2.dtb \ imx6q-novena.dtb \ imx6q-phytec-pbab01.dtb \ + imx6q-pistachio.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ @@ -448,17 +464,25 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-1020.dtb \ imx6q-tx6q-1020-comtft.dtb \ imx6q-tx6q-1036.dtb \ + imx6q-tx6q-1036-mb7.dtb \ + imx6q-tx6q-10x0-mb7.dtb \ imx6q-tx6q-1110.dtb \ imx6q-tx6q-11x0-mb7.dtb \ imx6q-udoo.dtb \ imx6q-utilite-pro.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ + imx6q-wandboard-revd1.dtb \ imx6q-zii-rdu2.dtb \ imx6qp-nitrogen6_max.dtb \ imx6qp-nitrogen6_som2.dtb \ imx6qp-sabreauto.dtb \ imx6qp-sabresd.dtb \ + imx6qp-tx6qp-8037.dtb \ + imx6qp-tx6qp-8037-mb7.dtb \ + imx6qp-tx6qp-8137.dtb \ + imx6qp-tx6qp-8137-mb7.dtb \ + imx6qp-wandboard-revd1.dtb \ imx6qp-zii-rdu2.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ @@ -469,6 +493,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sdb-reva.dtb \ imx6sx-sdb-sai.dtb \ imx6sx-sdb.dtb \ + imx6sx-softing-vining-2000.dtb \ imx6sx-udoo-neo-basic.dtb \ imx6sx-udoo-neo-extended.dtb \ imx6sx-udoo-neo-full.dtb @@ -681,6 +706,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-netgear-wnr854t.dtb \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_ACTIONS) += \ + owl-s500-cubieboard6.dtb \ owl-s500-guitar-bb-rev-b.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ prima2-evb.dtb @@ -701,7 +727,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ + qcom-msm8974-fairphone-fp2.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ + qcom-msm8974-sony-xperia-castor.dtb \ qcom-msm8974-sony-xperia-honami.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb dtb-$(CONFIG_ARCH_REALVIEW) += \ @@ -725,7 +753,9 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ r8a7743-iwg20d-q7.dtb \ + r8a7743-iwg20d-q7-dbcm-ca.dtb \ r8a7743-sk-rzg1m.dtb \ + r8a7745-iwg22d-sodimm.dtb \ r8a7745-sk-rzg1e.dtb \ r8a7778-bockw.dtb \ r8a7779-marzen.dtb \ @@ -768,7 +798,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-mickey.dtb \ rk3288-veyron-minnie.dtb \ rk3288-veyron-pinky.dtb \ - rk3288-veyron-speedy.dtb + rk3288-veyron-speedy.dtb \ + rk3288-vyasa.dtb dtb-$(CONFIG_ARCH_S3C24XX) += \ s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += \ @@ -891,6 +922,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-lime2-emmc.dtb \ sun7i-a20-olinuxino-micro.dtb \ + sun7i-a20-olinuxino-micro-emmc.dtb \ sun7i-a20-orangepi.dtb \ sun7i-a20-orangepi-mini.dtb \ sun7i-a20-pcduino3.dtb \ @@ -916,6 +948,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ sun8i-a83t-bananapi-m3.dtb \ sun8i-a83t-cubietruck-plus.dtb \ + sun8i-a83t-tbs-a711.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-beelink-x2.dtb \ @@ -932,8 +965,10 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-r16-bananapi-m2m.dtb \ sun8i-r16-parrot.dtb \ + sun8i-r40-bananapi-m2-ultra.dtb \ sun8i-v3s-licheepi-zero.dtb \ - sun8i-v3s-licheepi-zero-dock.dtb + sun8i-v3s-licheepi-zero-dock.dtb \ + sun8i-v40-bananapi-m2-berry.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index e58fab8aec5df2a885ea8c04f9eefda09cf2d307..d37f95025807708a9c486d1e6f6365f9960286b5 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -130,9 +130,11 @@ }; }; - pmu { + pmu@4b000000 { compatible = "arm,cortex-a8-pmu"; interrupts = <3>; + reg = <0x4b000000 0x1000000>; + ti,hwmods = "debugss"; }; /* @@ -628,6 +630,7 @@ reg-names = "phy"; status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; usb0: usb@47401000 { @@ -676,6 +679,7 @@ reg-names = "phy"; status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; usb1: usb@47401800 { @@ -929,6 +933,12 @@ }; }; + emif: emif@4c000000 { + compatible = "ti,emif-am3352"; + reg = <0x4c000000 0x1000000>; + ti,hwmods = "emif"; + }; + gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index e5b061469bf88a234ef2367ecb94a143afca793f..4714a59fd86df05a8715ee400f18e6a71041eac7 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -927,7 +927,8 @@ reg = <0x48038000 0x2000>, <0x46000000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <80>, <81>; + interrupts = , + ; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8 2>, @@ -941,7 +942,8 @@ reg = <0x4803C000 0x2000>, <0x46400000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <82>, <83>; + interrupts = , + ; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10 2>, diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 9e92d480576b04ae89f3e5aefc7c57f3a522070c..3b9a94c274a7b01ed29ead402a4b3538c122138d 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -301,8 +301,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - dmas = <&edma 16 - &edma 17>; + dmas = <&edma 16 0 + &edma 17 0>; dma-names = "tx0", "rx0"; flash: w25q64cvzpig@0 { diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 081fa68b6f98049ad2edb1c9c6d579c0958a7a2d..a04d79ec212a9f2d94fc5197b1556821b8198af7 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -75,6 +75,9 @@ compatible = "gpio-matrix-keypad"; debounce-delay-ms = <5>; col-scan-delay-us = <2>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&matrix_keypad_default>; + pinctrl-1 = <&matrix_keypad_sleep>; row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ @@ -145,6 +148,43 @@ }; &am43xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&unused_pins>; + + unused_pins: unused_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0x848, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x850, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x858, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x860, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x864, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x868, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x86c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x878, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x908, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x91c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x920, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9e0, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA0c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA38, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA3c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA40, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA44, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA48, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA4c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA50, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA54, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA58, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA5c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA60, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA64, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0xA68, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA6C, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA74, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA78, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ @@ -198,7 +238,7 @@ >; }; - nand_flash_x8: nand_flash_x8 { + nand_flash_x8_default: nand_flash_x8_default { pinctrl-single,pins = < AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */ AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ @@ -219,12 +259,39 @@ >; }; - ecap0_pins: backlight_pins { + nand_flash_x8_sleep: nand_flash_x8_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x840, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x800, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x804, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x808, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x80c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x810, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x814, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x818, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x81c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x870, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x874, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; + + ecap0_pins_default: backlight_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ >; }; + ecap0_pins_sleep: backlight_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x964, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; + i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */ @@ -232,7 +299,7 @@ >; }; - spi0_pins: pinmux_spi0_pins { + spi0_pins_default: pinmux_spi0_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */ AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */ @@ -241,7 +308,16 @@ >; }; - spi1_pins: pinmux_spi1_pins { + spi0_pins_sleep: pinmux_spi0_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x950, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x954, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x958, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x95c, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; + + spi1_pins_default: pinmux_spi1_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */ AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ @@ -250,13 +326,54 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + spi1_pins_sleep: pinmux_spi1_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x990, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x994, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x998, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x99c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; - qspi1_default: qspi1_default { + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x960, DS0_PIN_OUTPUT_PULLUP | PIN_INPUT | MUX_MODE7) + >; + }; + + matrix_keypad_default: matrix_keypad_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* mii1_tx_clk.gpio3_9 */ + AM4372_IOPAD(0x930, PIN_OUTPUT | MUX_MODE7) /* mii1_rx_clk.gpio3_10 */ + AM4372_IOPAD(0x934, PIN_OUTPUT | MUX_MODE7) /* mii1_rxd3.gpio2_18 */ + AM4372_IOPAD(0x938, PIN_OUTPUT | MUX_MODE7) /* mii1_rxd2.gpio2_19 */ + AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn.gpio0_12 */ + AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn.gpio0_13 */ + AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_rxd.gpio0_14 */ + AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_txd.gpio0_15 */ + >; + }; + + matrix_keypad_sleep: matrix_keypad_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + qspi1_pins_default: qspi1_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3) AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2) @@ -267,12 +384,29 @@ >; }; - pixcir_ts_pins: pixcir_ts_pins { + qspi1_pins_sleep: qspi1_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x888, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; + + pixcir_ts_pins_default: pixcir_ts_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ >; }; + pixcir_ts_pins_sleep: pixcir_ts_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x844, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ + >; + }; + hdq_pins: pinmux_hdq_pins { pinctrl-single,pins = < AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */ @@ -355,6 +489,48 @@ >; }; + uart0_pins_default: uart0_pins_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */ + AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */ + AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart0_pins_sleep: uart0_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) + AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) + >; + }; + + usb2_phy1_default: usb2_phy1_default { + pinctrl-single,pins = < + AM4372_IOPAD(0xac0, PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; + + usb2_phy1_sleep: usb2_phy1_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + usb2_phy2_default: usb2_phy2_default { + pinctrl-single,pins = < + AM4372_IOPAD(0xac4, PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; + + usb2_phy2_sleep: usb2_phy2_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */ @@ -378,8 +554,9 @@ status = "okay"; vmmc-supply = <&vmmcsd_fixed>; bus-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; @@ -478,8 +655,10 @@ pixcir_ts@5c { compatible = "pixcir,pixcir_tangoc"; - pinctrl-names = "default"; - pinctrl-0 = <&pixcir_ts_pins>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pixcir_ts_pins_default>; + pinctrl-1 = <&pixcir_ts_pins_sleep>; + reg = <0x5c>; interrupt-parent = <&gpio1>; interrupts = <17 IRQ_TYPE_EDGE_FALLING>; @@ -550,8 +729,9 @@ &gpmc { status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */ - pinctrl-names = "default"; - pinctrl-0 = <&nand_flash_x8>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&nand_flash_x8_default>; + pinctrl-1 = <&nand_flash_x8_sleep>; ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ nand@0,0 { compatible = "ti,omap2-nand"; @@ -647,24 +827,30 @@ &ecap0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&ecap0_pins>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&ecap0_pins_default>; + pinctrl-1 = <&ecap0_pins_sleep>; }; &spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi0_pins_default>; + pinctrl-1 = <&spi0_pins_sleep>; }; &spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_pins_default>; + pinctrl-1 = <&spi1_pins_sleep>; }; &usb2_phy1 { status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb2_phy1_default>; + pinctrl-1 = <&usb2_phy1_sleep>; }; &usb1 { @@ -674,6 +860,9 @@ &usb2_phy2 { status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb2_phy2_default>; + pinctrl-1 = <&usb2_phy2_sleep>; }; &usb2 { @@ -683,8 +872,9 @@ &qspi { status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */ - pinctrl-names = "default"; - pinctrl-0 = <&qspi1_default>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi1_pins_default>; + pinctrl-1 = <&qspi1_pins_sleep>; spi-max-frequency = <48000000>; m25p80@0 { @@ -770,6 +960,13 @@ }; }; +&uart0 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart0_pins_default>; + pinctrl-1 = <&uart0_pins_sleep>; +}; + &mcasp1 { #sound-dai-cells = <0>; pinctrl-names = "default", "sleep"; diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 4978011df5bd5899b66ffbe36bbcf711fec7da7e..95040810c0949e0af55b7e48db4107e5281b4f02 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -316,32 +316,32 @@ * change the default environment, unless you know * what you are doing. */ - partition@00000000 { /* u-boot */ + partition@0 { /* u-boot */ label = "RedBoot"; reg = <0x00000000 0x000c0000>; /* 768KB */ }; - partition@000c0000 { /* uImage */ + partition@c0000 { /* uImage */ label = "zImage"; reg = <0x000c0000 0x002d0000>; /* 2880KB */ }; - partition@00390000 { /* uInitramfs */ + partition@390000 { /* uInitramfs */ label = "rd.gz"; reg = <0x00390000 0x00440000>; /* 4250KB */ }; - partition@007d0000 { /* MAC address and serial number */ + partition@7d0000 { /* MAC address and serial number */ label = "vendor"; reg = <0x007d0000 0x00010000>; /* 64KB */ }; - partition@007e0000 { + partition@7e0000 { label = "RedBoot config"; reg = <0x007e0000 0x00010000>; /* 64KB */ }; - partition@007f0000 { + partition@7f0000 { label = "FIS directory"; reg = <0x007f0000 0x00010000>; /* 64KB */ }; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 25d2d720dc0e2cacc98b402e609e0fe78eb01acb..678aa023335d885279d6ba3bcbc67f774c3b1408 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -236,6 +236,7 @@ usb3_phy: usb3_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_xhci0_vbus>; + #phy-cells = <0>; }; reg_xhci0_vbus: xhci0-vbus { diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index e1f355ffc8f7e07cbbc3912b13e7436f9ac4f407..434dc9aaa5e4e2b46429e221201bf7839ae00a80 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -66,6 +66,7 @@ usb3_1_phy: usb3_1-phy { compatible = "usb-nop-xceiv"; vcc-supply = <&usb3_1_vbus>; + #phy-cells = <0>; }; usb3_1_vbus: usb3_1-vbus { diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts index 31510eb56f108e8a8708bb6e4a513fb137982c13..0a3552ebda3b80c84588a3cdfd45fb1ae9286fd2 100644 --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -191,11 +191,13 @@ usb3_0_phy: usb3_0_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_usb3_0_vbus>; + #phy-cells = <0>; }; usb3_1_phy: usb3_1_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_usb3_1_vbus>; + #phy-cells = <0>; }; reg_usb3_0_vbus: usb3-vbus0 { @@ -267,35 +269,35 @@ * enumerated. The MAC address and the serial number are listed * in the "vendor" partition. */ - partition@00000000 { + partition@0 { label = "RedBoot"; reg = <0x00000000 0x000f0000>; read-only; }; - partition@000c0000 { + partition@c0000 { label = "zImage"; reg = <0x000f0000 0x002d0000>; }; - partition@00390000 { + partition@390000 { label = "rd.gz"; reg = <0x003c0000 0x00410000>; }; - partition@007d0000 { + partition@7d0000 { label = "vendor"; reg = <0x007d0000 0x00010000>; read-only; }; - partition@007e0000 { + partition@7e0000 { label = "RedBoot config"; reg = <0x007e0000 0x00010000>; read-only; }; - partition@007f0000 { + partition@7f0000 { label = "FIS directory"; reg = <0x007f0000 0x00010000>; read-only; diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index f503955dbd3b810db157344e3f9cf48dadd4b1ca..51b4ee6df130188cb0fe839ce78aa5f84d5e3607 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -276,11 +276,13 @@ usb2_1_phy: usb2_1_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_usb2_1_vbus>; + #phy-cells = <0>; }; usb3_phy: usb3_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_usb3_vbus>; + #phy-cells = <0>; }; reg_usb3_vbus: usb3-vbus { diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index d8e05bab0cee5104e74edb5ad0d8635d07079653..d7228a5461c828d495546f939cd9fddfd6356dbd 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -332,32 +332,32 @@ * change the default environment, unless you know * what you are doing. */ - partition@00000000 { /* u-boot */ + partition@0 { /* u-boot */ label = "RedBoot"; reg = <0x00000000 0x000d0000>; /* 832KB */ }; - partition@000c0000 { /* uImage */ + partition@c0000 { /* uImage */ label = "zImage"; reg = <0x000d0000 0x002d0000>; /* 2880KB */ }; - partition@003a0000 { /* uInitramfs */ + partition@3a0000 { /* uInitramfs */ label = "rd.gz"; reg = <0x003a0000 0x00430000>; /* 4250KB */ }; - partition@007d0000 { /* MAC address and serial number */ + partition@7d0000 { /* MAC address and serial number */ label = "vendor"; reg = <0x007d0000 0x00010000>; /* 64KB */ }; - partition@007e0000 { + partition@7e0000 { label = "RedBoot config"; reg = <0x007e0000 0x00010000>; /* 64KB */ }; - partition@007f0000 { + partition@7f0000 { label = "FIS directory"; reg = <0x007f0000 0x00010000>; /* 64KB */ }; diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi index 767cbe8d8557a1d111443c0c0e119b578d591b9a..2ed11773048d2e6a0f2d62112ed378c9572367bf 100644 --- a/arch/arm/boot/dts/artpec6.dtsi +++ b/arch/arm/boot/dts/artpec6.dtsi @@ -151,7 +151,6 @@ interrupts = , ; interrupt-affinity = <&cpu0>, <&cpu1>; - interrupt-parent = <&intc>; }; pcie: pcie@f8050000 { @@ -185,7 +184,6 @@ compatible = "simple-bus"; #address-cells = <0x1>; #size-cells = <0x1>; - interrupt-parent = <&intc>; ranges; dma-ranges = <0x80000000 0x00000000 0x40000000>; dma-coherent; @@ -195,7 +193,6 @@ clocks = <ð_phy_ref_clk>, <&clkctrl ARTPEC6_CLK_ETH_ACLK>; compatible = "snps,dwc-qos-ethernet-4.10"; - interrupt-parent = <&intc>; interrupts = ; reg = <0xf8010000 0x4000>; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index f53e89d63477ee1cef6bf3b6e6ee9f995f4e4525..602bc10fdaf4829d5eb5de8eea03961f399167f2 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -60,3 +60,22 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; }; + +&i2c3 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&i2c7 { + status = "okay"; + + lm75@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index e1b523bd5b8b3b90616ccc272120c5ed52593819..c786bc2f2919b8586e60363a4314978eb61dbae9 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -7,10 +7,6 @@ model = "Palmetto BMC"; compatible = "tyan,palmetto-bmc", "aspeed,ast2400"; - aliases { - serial4 = &uart5; - }; - chosen { stdout-path = &uart5; bootargs = "console=ttyS4,115200 earlyprintk"; @@ -62,3 +58,55 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; }; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; + + rtc@68 { + compatible = "dallas,ds3231"; + reg = <0x68>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + tmp423@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 6dd77cba191c01a66ec57da0a27575394a31ea45..8067793129ea450f0e416fa18c13e525997d57a9 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -80,3 +80,61 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; }; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + /* PCIe slot 1 (x8) */ + status = "okay"; +}; + +&i2c7 { + /* PCIe slot 2 (x16) */ + status = "okay"; +}; + +&i2c8 { + /* PCIe slot 3 (x16) */ + status = "okay"; +}; + +&i2c9 { + /* PCIe slot 4 (x16) */ + status = "okay"; +}; + +&i2c10 { + /* PCIe slot 5 (x8) */ + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index fcc5efbd0879b7ab4fdbdd545fff0404c413e6d9..45d815a86d420b9f8f108919bb846f865f9b5231 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -8,6 +8,29 @@ #size-cells = <1>; interrupt-parent = <&vic>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &vuart; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -110,7 +133,7 @@ clock-frequency = <192000000>; }; - clk_apb: clk_apb@08 { + clk_apb: clk_apb@8 { #clock-cells = <0>; compatible = "aspeed,g4-apb-clock", "fixed-clock"; reg = <0x08>; @@ -127,750 +150,17 @@ pinctrl: pinctrl { compatible = "aspeed,g4-pinctrl"; - - pinctrl_acpi_default: acpi_default { - function = "ACPI"; - groups = "ACPI"; - }; - - pinctrl_adc0_default: adc0_default { - function = "ADC0"; - groups = "ADC0"; - }; - - pinctrl_adc1_default: adc1_default { - function = "ADC1"; - groups = "ADC1"; - }; - - pinctrl_adc10_default: adc10_default { - function = "ADC10"; - groups = "ADC10"; - }; - - pinctrl_adc11_default: adc11_default { - function = "ADC11"; - groups = "ADC11"; - }; - - pinctrl_adc12_default: adc12_default { - function = "ADC12"; - groups = "ADC12"; - }; - - pinctrl_adc13_default: adc13_default { - function = "ADC13"; - groups = "ADC13"; - }; - - pinctrl_adc14_default: adc14_default { - function = "ADC14"; - groups = "ADC14"; - }; - - pinctrl_adc15_default: adc15_default { - function = "ADC15"; - groups = "ADC15"; - }; - - pinctrl_adc2_default: adc2_default { - function = "ADC2"; - groups = "ADC2"; - }; - - pinctrl_adc3_default: adc3_default { - function = "ADC3"; - groups = "ADC3"; - }; - - pinctrl_adc4_default: adc4_default { - function = "ADC4"; - groups = "ADC4"; - }; - - pinctrl_adc5_default: adc5_default { - function = "ADC5"; - groups = "ADC5"; - }; - - pinctrl_adc6_default: adc6_default { - function = "ADC6"; - groups = "ADC6"; - }; - - pinctrl_adc7_default: adc7_default { - function = "ADC7"; - groups = "ADC7"; - }; - - pinctrl_adc8_default: adc8_default { - function = "ADC8"; - groups = "ADC8"; - }; - - pinctrl_adc9_default: adc9_default { - function = "ADC9"; - groups = "ADC9"; - }; - - pinctrl_bmcint_default: bmcint_default { - function = "BMCINT"; - groups = "BMCINT"; - }; - - pinctrl_ddcclk_default: ddcclk_default { - function = "DDCCLK"; - groups = "DDCCLK"; - }; - - pinctrl_ddcdat_default: ddcdat_default { - function = "DDCDAT"; - groups = "DDCDAT"; - }; - - pinctrl_extrst_default: extrst_default { - function = "EXTRST"; - groups = "EXTRST"; - }; - - pinctrl_flack_default: flack_default { - function = "FLACK"; - groups = "FLACK"; - }; - - pinctrl_flbusy_default: flbusy_default { - function = "FLBUSY"; - groups = "FLBUSY"; - }; - - pinctrl_flwp_default: flwp_default { - function = "FLWP"; - groups = "FLWP"; - }; - - pinctrl_gpid_default: gpid_default { - function = "GPID"; - groups = "GPID"; - }; - - pinctrl_gpid0_default: gpid0_default { - function = "GPID0"; - groups = "GPID0"; - }; - - pinctrl_gpid2_default: gpid2_default { - function = "GPID2"; - groups = "GPID2"; - }; - - pinctrl_gpid4_default: gpid4_default { - function = "GPID4"; - groups = "GPID4"; - }; - - pinctrl_gpid6_default: gpid6_default { - function = "GPID6"; - groups = "GPID6"; - }; - - pinctrl_gpie0_default: gpie0_default { - function = "GPIE0"; - groups = "GPIE0"; - }; - - pinctrl_gpie2_default: gpie2_default { - function = "GPIE2"; - groups = "GPIE2"; - }; - - pinctrl_gpie4_default: gpie4_default { - function = "GPIE4"; - groups = "GPIE4"; - }; - - pinctrl_gpie6_default: gpie6_default { - function = "GPIE6"; - groups = "GPIE6"; - }; - - pinctrl_i2c10_default: i2c10_default { - function = "I2C10"; - groups = "I2C10"; - }; - - pinctrl_i2c11_default: i2c11_default { - function = "I2C11"; - groups = "I2C11"; - }; - - pinctrl_i2c12_default: i2c12_default { - function = "I2C12"; - groups = "I2C12"; - }; - - pinctrl_i2c13_default: i2c13_default { - function = "I2C13"; - groups = "I2C13"; - }; - - pinctrl_i2c14_default: i2c14_default { - function = "I2C14"; - groups = "I2C14"; - }; - - pinctrl_i2c3_default: i2c3_default { - function = "I2C3"; - groups = "I2C3"; - }; - - pinctrl_i2c4_default: i2c4_default { - function = "I2C4"; - groups = "I2C4"; - }; - - pinctrl_i2c5_default: i2c5_default { - function = "I2C5"; - groups = "I2C5"; - }; - - pinctrl_i2c6_default: i2c6_default { - function = "I2C6"; - groups = "I2C6"; - }; - - pinctrl_i2c7_default: i2c7_default { - function = "I2C7"; - groups = "I2C7"; - }; - - pinctrl_i2c8_default: i2c8_default { - function = "I2C8"; - groups = "I2C8"; - }; - - pinctrl_i2c9_default: i2c9_default { - function = "I2C9"; - groups = "I2C9"; - }; - - pinctrl_lpcpd_default: lpcpd_default { - function = "LPCPD"; - groups = "LPCPD"; - }; - - pinctrl_lpcpme_default: lpcpme_default { - function = "LPCPME"; - groups = "LPCPME"; - }; - - pinctrl_lpcrst_default: lpcrst_default { - function = "LPCRST"; - groups = "LPCRST"; - }; - - pinctrl_lpcsmi_default: lpcsmi_default { - function = "LPCSMI"; - groups = "LPCSMI"; - }; - - pinctrl_mac1link_default: mac1link_default { - function = "MAC1LINK"; - groups = "MAC1LINK"; - }; - - pinctrl_mac2link_default: mac2link_default { - function = "MAC2LINK"; - groups = "MAC2LINK"; - }; - - pinctrl_mdio1_default: mdio1_default { - function = "MDIO1"; - groups = "MDIO1"; - }; - - pinctrl_mdio2_default: mdio2_default { - function = "MDIO2"; - groups = "MDIO2"; - }; - - pinctrl_ncts1_default: ncts1_default { - function = "NCTS1"; - groups = "NCTS1"; - }; - - pinctrl_ncts2_default: ncts2_default { - function = "NCTS2"; - groups = "NCTS2"; - }; - - pinctrl_ncts3_default: ncts3_default { - function = "NCTS3"; - groups = "NCTS3"; - }; - - pinctrl_ncts4_default: ncts4_default { - function = "NCTS4"; - groups = "NCTS4"; - }; - - pinctrl_ndcd1_default: ndcd1_default { - function = "NDCD1"; - groups = "NDCD1"; - }; - - pinctrl_ndcd2_default: ndcd2_default { - function = "NDCD2"; - groups = "NDCD2"; - }; - - pinctrl_ndcd3_default: ndcd3_default { - function = "NDCD3"; - groups = "NDCD3"; - }; - - pinctrl_ndcd4_default: ndcd4_default { - function = "NDCD4"; - groups = "NDCD4"; - }; - - pinctrl_ndsr1_default: ndsr1_default { - function = "NDSR1"; - groups = "NDSR1"; - }; - - pinctrl_ndsr2_default: ndsr2_default { - function = "NDSR2"; - groups = "NDSR2"; - }; - - pinctrl_ndsr3_default: ndsr3_default { - function = "NDSR3"; - groups = "NDSR3"; - }; - - pinctrl_ndsr4_default: ndsr4_default { - function = "NDSR4"; - groups = "NDSR4"; - }; - - pinctrl_ndtr1_default: ndtr1_default { - function = "NDTR1"; - groups = "NDTR1"; - }; - - pinctrl_ndtr2_default: ndtr2_default { - function = "NDTR2"; - groups = "NDTR2"; - }; - - pinctrl_ndtr3_default: ndtr3_default { - function = "NDTR3"; - groups = "NDTR3"; - }; - - pinctrl_ndtr4_default: ndtr4_default { - function = "NDTR4"; - groups = "NDTR4"; - }; - - pinctrl_ndts4_default: ndts4_default { - function = "NDTS4"; - groups = "NDTS4"; - }; - - pinctrl_nri1_default: nri1_default { - function = "NRI1"; - groups = "NRI1"; - }; - - pinctrl_nri2_default: nri2_default { - function = "NRI2"; - groups = "NRI2"; - }; - - pinctrl_nri3_default: nri3_default { - function = "NRI3"; - groups = "NRI3"; - }; - - pinctrl_nri4_default: nri4_default { - function = "NRI4"; - groups = "NRI4"; - }; - - pinctrl_nrts1_default: nrts1_default { - function = "NRTS1"; - groups = "NRTS1"; - }; - - pinctrl_nrts2_default: nrts2_default { - function = "NRTS2"; - groups = "NRTS2"; - }; - - pinctrl_nrts3_default: nrts3_default { - function = "NRTS3"; - groups = "NRTS3"; - }; - - pinctrl_oscclk_default: oscclk_default { - function = "OSCCLK"; - groups = "OSCCLK"; - }; - - pinctrl_pwm0_default: pwm0_default { - function = "PWM0"; - groups = "PWM0"; - }; - - pinctrl_pwm1_default: pwm1_default { - function = "PWM1"; - groups = "PWM1"; - }; - - pinctrl_pwm2_default: pwm2_default { - function = "PWM2"; - groups = "PWM2"; - }; - - pinctrl_pwm3_default: pwm3_default { - function = "PWM3"; - groups = "PWM3"; - }; - - pinctrl_pwm4_default: pwm4_default { - function = "PWM4"; - groups = "PWM4"; - }; - - pinctrl_pwm5_default: pwm5_default { - function = "PWM5"; - groups = "PWM5"; - }; - - pinctrl_pwm6_default: pwm6_default { - function = "PWM6"; - groups = "PWM6"; - }; - - pinctrl_pwm7_default: pwm7_default { - function = "PWM7"; - groups = "PWM7"; - }; - - pinctrl_rgmii1_default: rgmii1_default { - function = "RGMII1"; - groups = "RGMII1"; - }; - - pinctrl_rgmii2_default: rgmii2_default { - function = "RGMII2"; - groups = "RGMII2"; - }; - - pinctrl_rmii1_default: rmii1_default { - function = "RMII1"; - groups = "RMII1"; - }; - - pinctrl_rmii2_default: rmii2_default { - function = "RMII2"; - groups = "RMII2"; - }; - - pinctrl_rom16_default: rom16_default { - function = "ROM16"; - groups = "ROM16"; - }; - - pinctrl_rom8_default: rom8_default { - function = "ROM8"; - groups = "ROM8"; - }; - - pinctrl_romcs1_default: romcs1_default { - function = "ROMCS1"; - groups = "ROMCS1"; - }; - - pinctrl_romcs2_default: romcs2_default { - function = "ROMCS2"; - groups = "ROMCS2"; - }; - - pinctrl_romcs3_default: romcs3_default { - function = "ROMCS3"; - groups = "ROMCS3"; - }; - - pinctrl_romcs4_default: romcs4_default { - function = "ROMCS4"; - groups = "ROMCS4"; - }; - - pinctrl_rxd1_default: rxd1_default { - function = "RXD1"; - groups = "RXD1"; - }; - - pinctrl_rxd2_default: rxd2_default { - function = "RXD2"; - groups = "RXD2"; - }; - - pinctrl_rxd3_default: rxd3_default { - function = "RXD3"; - groups = "RXD3"; - }; - - pinctrl_rxd4_default: rxd4_default { - function = "RXD4"; - groups = "RXD4"; - }; - - pinctrl_salt1_default: salt1_default { - function = "SALT1"; - groups = "SALT1"; - }; - - pinctrl_salt2_default: salt2_default { - function = "SALT2"; - groups = "SALT2"; - }; - - pinctrl_salt3_default: salt3_default { - function = "SALT3"; - groups = "SALT3"; - }; - - pinctrl_salt4_default: salt4_default { - function = "SALT4"; - groups = "SALT4"; - }; - - pinctrl_sd1_default: sd1_default { - function = "SD1"; - groups = "SD1"; - }; - - pinctrl_sd2_default: sd2_default { - function = "SD2"; - groups = "SD2"; - }; - - pinctrl_sgpmck_default: sgpmck_default { - function = "SGPMCK"; - groups = "SGPMCK"; - }; - - pinctrl_sgpmi_default: sgpmi_default { - function = "SGPMI"; - groups = "SGPMI"; - }; - - pinctrl_sgpmld_default: sgpmld_default { - function = "SGPMLD"; - groups = "SGPMLD"; - }; - - pinctrl_sgpmo_default: sgpmo_default { - function = "SGPMO"; - groups = "SGPMO"; - }; - - pinctrl_sgpsck_default: sgpsck_default { - function = "SGPSCK"; - groups = "SGPSCK"; - }; - - pinctrl_sgpsi0_default: sgpsi0_default { - function = "SGPSI0"; - groups = "SGPSI0"; - }; - - pinctrl_sgpsi1_default: sgpsi1_default { - function = "SGPSI1"; - groups = "SGPSI1"; - }; - - pinctrl_sgpsld_default: sgpsld_default { - function = "SGPSLD"; - groups = "SGPSLD"; - }; - - pinctrl_sioonctrl_default: sioonctrl_default { - function = "SIOONCTRL"; - groups = "SIOONCTRL"; - }; - - pinctrl_siopbi_default: siopbi_default { - function = "SIOPBI"; - groups = "SIOPBI"; - }; - - pinctrl_siopbo_default: siopbo_default { - function = "SIOPBO"; - groups = "SIOPBO"; - }; - - pinctrl_siopwreq_default: siopwreq_default { - function = "SIOPWREQ"; - groups = "SIOPWREQ"; - }; - - pinctrl_siopwrgd_default: siopwrgd_default { - function = "SIOPWRGD"; - groups = "SIOPWRGD"; - }; - - pinctrl_sios3_default: sios3_default { - function = "SIOS3"; - groups = "SIOS3"; - }; - - pinctrl_sios5_default: sios5_default { - function = "SIOS5"; - groups = "SIOS5"; - }; - - pinctrl_siosci_default: siosci_default { - function = "SIOSCI"; - groups = "SIOSCI"; - }; - - pinctrl_spi1_default: spi1_default { - function = "SPI1"; - groups = "SPI1"; - }; - - pinctrl_spi1debug_default: spi1debug_default { - function = "SPI1DEBUG"; - groups = "SPI1DEBUG"; - }; - - pinctrl_spi1passthru_default: spi1passthru_default { - function = "SPI1PASSTHRU"; - groups = "SPI1PASSTHRU"; - }; - - pinctrl_spics1_default: spics1_default { - function = "SPICS1"; - groups = "SPICS1"; - }; - - pinctrl_timer3_default: timer3_default { - function = "TIMER3"; - groups = "TIMER3"; - }; - - pinctrl_timer4_default: timer4_default { - function = "TIMER4"; - groups = "TIMER4"; - }; - - pinctrl_timer5_default: timer5_default { - function = "TIMER5"; - groups = "TIMER5"; - }; - - pinctrl_timer6_default: timer6_default { - function = "TIMER6"; - groups = "TIMER6"; - }; - - pinctrl_timer7_default: timer7_default { - function = "TIMER7"; - groups = "TIMER7"; - }; - - pinctrl_timer8_default: timer8_default { - function = "TIMER8"; - groups = "TIMER8"; - }; - - pinctrl_txd1_default: txd1_default { - function = "TXD1"; - groups = "TXD1"; - }; - - pinctrl_txd2_default: txd2_default { - function = "TXD2"; - groups = "TXD2"; - }; - - pinctrl_txd3_default: txd3_default { - function = "TXD3"; - groups = "TXD3"; - }; - - pinctrl_txd4_default: txd4_default { - function = "TXD4"; - groups = "TXD4"; - }; - - pinctrl_uart6_default: uart6_default { - function = "UART6"; - groups = "UART6"; - }; - - pinctrl_usbcki_default: usbcki_default { - function = "USBCKI"; - groups = "USBCKI"; - }; - - pinctrl_vgabios_rom_default: vgabios_rom_default { - function = "VGABIOS_ROM"; - groups = "VGABIOS_ROM"; - }; - - pinctrl_vgahs_default: vgahs_default { - function = "VGAHS"; - groups = "VGAHS"; - }; - - pinctrl_vgavs_default: vgavs_default { - function = "VGAVS"; - groups = "VGAVS"; - }; - - pinctrl_vpi18_default: vpi18_default { - function = "VPI18"; - groups = "VPI18"; - }; - - pinctrl_vpi24_default: vpi24_default { - function = "VPI24"; - groups = "VPI24"; - }; - - pinctrl_vpi30_default: vpi30_default { - function = "VPI30"; - groups = "VPI30"; - }; - - pinctrl_vpo12_default: vpo12_default { - function = "VPO12"; - groups = "VPO12"; - }; - - pinctrl_vpo24_default: vpo24_default { - function = "VPO24"; - groups = "VPO24"; - }; - - pinctrl_wdtrst1_default: wdtrst1_default { - function = "WDTRST1"; - groups = "WDTRST1"; - }; - - pinctrl_wdtrst2_default: wdtrst2_default { - function = "WDTRST2"; - groups = "WDTRST2"; - }; - }; }; + adc: adc@1e6e9000 { + compatible = "aspeed,ast2400-adc"; + reg = <0x1e6e9000 0xb0>; + clocks = <&clk_apb>; + #io-channel-cells = <1>; + status = "disabled"; + }; + sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x8000>; // 32K @@ -895,23 +185,9 @@ clock-names = "PCLK"; }; - wdt1: wdt@1e785000 { - compatible = "aspeed,ast2400-wdt"; - reg = <0x1e785000 0x1c>; - interrupts = <27>; - }; - - wdt2: wdt@1e785020 { - compatible = "aspeed,ast2400-wdt"; - reg = <0x1e785020 0x1c>; - interrupts = <27>; - clocks = <&clk_apb>; - status = "disabled"; - }; - uart1: serial@1e783000 { compatible = "ns16550a"; - reg = <0x1e783000 0x1000>; + reg = <0x1e783000 0x20>; reg-shift = <2>; interrupts = <9>; clocks = <&clk_uart>; @@ -919,64 +195,1046 @@ status = "disabled"; }; - uart2: serial@1e78d000 { + uart5: serial@1e784000 { compatible = "ns16550a"; - reg = <0x1e78d000 0x1000>; + reg = <0x1e784000 0x20>; reg-shift = <2>; - interrupts = <32>; + interrupts = <10>; clocks = <&clk_uart>; no-loopback-test; status = "disabled"; }; - uart3: serial@1e78e000 { - compatible = "ns16550a"; - reg = <0x1e78e000 0x1000>; + wdt1: watchdog@1e785000 { + compatible = "aspeed,ast2400-wdt"; + reg = <0x1e785000 0x1c>; + }; + + wdt2: watchdog@1e785020 { + compatible = "aspeed,ast2400-wdt"; + reg = <0x1e785020 0x1c>; + }; + + vuart: serial@1e787000 { + compatible = "aspeed,ast2400-vuart"; + reg = <0x1e787000 0x40>; reg-shift = <2>; - interrupts = <33>; + interrupts = <10>; clocks = <&clk_uart>; no-loopback-test; status = "disabled"; }; - uart4: serial@1e78f000 { + uart2: serial@1e78d000 { compatible = "ns16550a"; - reg = <0x1e78f000 0x1000>; + reg = <0x1e78d000 0x20>; reg-shift = <2>; - interrupts = <34>; + interrupts = <32>; clocks = <&clk_uart>; no-loopback-test; status = "disabled"; }; - uart5: serial@1e784000 { + uart3: serial@1e78e000 { compatible = "ns16550a"; - reg = <0x1e784000 0x1000>; + reg = <0x1e78e000 0x20>; reg-shift = <2>; - interrupts = <10>; + interrupts = <33>; clocks = <&clk_uart>; - current-speed = <38400>; no-loopback-test; status = "disabled"; }; - uart6: serial@1e787000 { + uart4: serial@1e78f000 { compatible = "ns16550a"; - reg = <0x1e787000 0x1000>; + reg = <0x1e78f000 0x20>; reg-shift = <2>; - interrupts = <10>; + interrupts = <34>; clocks = <&clk_uart>; no-loopback-test; status = "disabled"; }; - adc: adc@1e6e9000 { - compatible = "aspeed,ast2400-adc"; - reg = <0x1e6e9000 0xb0>; - clocks = <&clk_apb>; - #io-channel-cells = <1>; - status = "disabled"; + i2c: i2c@1e78a000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e78a000 0x1000>; }; }; }; }; + +&i2c { + i2c_ic: interrupt-controller@0 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2400-i2c-ic"; + reg = <0x0 0x40>; + interrupts = <12>; + interrupt-controller; + }; + + i2c0: i2c-bus@40 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x40 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <0>; + interrupt-parent = <&i2c_ic>; + status = "disabled"; + /* Does not need pinctrl properties */ + }; + + i2c1: i2c-bus@80 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x80 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <1>; + interrupt-parent = <&i2c_ic>; + status = "disabled"; + /* Does not need pinctrl properties */ + }; + + i2c2: i2c-bus@c0 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0xc0 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <2>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + status = "disabled"; + }; + + i2c3: i2c-bus@100 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x100 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <3>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + status = "disabled"; + }; + + i2c4: i2c-bus@140 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x140 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <4>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + status = "disabled"; + }; + + i2c5: i2c-bus@180 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x180 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <5>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6_default>; + status = "disabled"; + }; + + i2c6: i2c-bus@1c0 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x1c0 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <6>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c7_default>; + status = "disabled"; + }; + + i2c7: i2c-bus@300 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x300 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <7>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c8_default>; + status = "disabled"; + }; + + i2c8: i2c-bus@340 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x340 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <8>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c9_default>; + status = "disabled"; + }; + + i2c9: i2c-bus@380 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x380 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <9>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + status = "disabled"; + }; + + i2c10: i2c-bus@3c0 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x3c0 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <10>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + status = "disabled"; + }; + + i2c11: i2c-bus@400 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x400 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <11>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c12_default>; + status = "disabled"; + }; + + i2c12: i2c-bus@440 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x440 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <12>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c13_default>; + status = "disabled"; + }; + + i2c13: i2c-bus@480 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x480 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <13>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c14_default>; + status = "disabled"; + }; +}; + +&pinctrl { + pinctrl_acpi_default: acpi_default { + function = "ACPI"; + groups = "ACPI"; + }; + + pinctrl_adc0_default: adc0_default { + function = "ADC0"; + groups = "ADC0"; + }; + + pinctrl_adc1_default: adc1_default { + function = "ADC1"; + groups = "ADC1"; + }; + + pinctrl_adc10_default: adc10_default { + function = "ADC10"; + groups = "ADC10"; + }; + + pinctrl_adc11_default: adc11_default { + function = "ADC11"; + groups = "ADC11"; + }; + + pinctrl_adc12_default: adc12_default { + function = "ADC12"; + groups = "ADC12"; + }; + + pinctrl_adc13_default: adc13_default { + function = "ADC13"; + groups = "ADC13"; + }; + + pinctrl_adc14_default: adc14_default { + function = "ADC14"; + groups = "ADC14"; + }; + + pinctrl_adc15_default: adc15_default { + function = "ADC15"; + groups = "ADC15"; + }; + + pinctrl_adc2_default: adc2_default { + function = "ADC2"; + groups = "ADC2"; + }; + + pinctrl_adc3_default: adc3_default { + function = "ADC3"; + groups = "ADC3"; + }; + + pinctrl_adc4_default: adc4_default { + function = "ADC4"; + groups = "ADC4"; + }; + + pinctrl_adc5_default: adc5_default { + function = "ADC5"; + groups = "ADC5"; + }; + + pinctrl_adc6_default: adc6_default { + function = "ADC6"; + groups = "ADC6"; + }; + + pinctrl_adc7_default: adc7_default { + function = "ADC7"; + groups = "ADC7"; + }; + + pinctrl_adc8_default: adc8_default { + function = "ADC8"; + groups = "ADC8"; + }; + + pinctrl_adc9_default: adc9_default { + function = "ADC9"; + groups = "ADC9"; + }; + + pinctrl_bmcint_default: bmcint_default { + function = "BMCINT"; + groups = "BMCINT"; + }; + + pinctrl_ddcclk_default: ddcclk_default { + function = "DDCCLK"; + groups = "DDCCLK"; + }; + + pinctrl_ddcdat_default: ddcdat_default { + function = "DDCDAT"; + groups = "DDCDAT"; + }; + + pinctrl_extrst_default: extrst_default { + function = "EXTRST"; + groups = "EXTRST"; + }; + + pinctrl_flack_default: flack_default { + function = "FLACK"; + groups = "FLACK"; + }; + + pinctrl_flbusy_default: flbusy_default { + function = "FLBUSY"; + groups = "FLBUSY"; + }; + + pinctrl_flwp_default: flwp_default { + function = "FLWP"; + groups = "FLWP"; + }; + + pinctrl_gpid_default: gpid_default { + function = "GPID"; + groups = "GPID"; + }; + + pinctrl_gpid0_default: gpid0_default { + function = "GPID0"; + groups = "GPID0"; + }; + + pinctrl_gpid2_default: gpid2_default { + function = "GPID2"; + groups = "GPID2"; + }; + + pinctrl_gpid4_default: gpid4_default { + function = "GPID4"; + groups = "GPID4"; + }; + + pinctrl_gpid6_default: gpid6_default { + function = "GPID6"; + groups = "GPID6"; + }; + + pinctrl_gpie0_default: gpie0_default { + function = "GPIE0"; + groups = "GPIE0"; + }; + + pinctrl_gpie2_default: gpie2_default { + function = "GPIE2"; + groups = "GPIE2"; + }; + + pinctrl_gpie4_default: gpie4_default { + function = "GPIE4"; + groups = "GPIE4"; + }; + + pinctrl_gpie6_default: gpie6_default { + function = "GPIE6"; + groups = "GPIE6"; + }; + + pinctrl_i2c10_default: i2c10_default { + function = "I2C10"; + groups = "I2C10"; + }; + + pinctrl_i2c11_default: i2c11_default { + function = "I2C11"; + groups = "I2C11"; + }; + + pinctrl_i2c12_default: i2c12_default { + function = "I2C12"; + groups = "I2C12"; + }; + + pinctrl_i2c13_default: i2c13_default { + function = "I2C13"; + groups = "I2C13"; + }; + + pinctrl_i2c14_default: i2c14_default { + function = "I2C14"; + groups = "I2C14"; + }; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_i2c4_default: i2c4_default { + function = "I2C4"; + groups = "I2C4"; + }; + + pinctrl_i2c5_default: i2c5_default { + function = "I2C5"; + groups = "I2C5"; + }; + + pinctrl_i2c6_default: i2c6_default { + function = "I2C6"; + groups = "I2C6"; + }; + + pinctrl_i2c7_default: i2c7_default { + function = "I2C7"; + groups = "I2C7"; + }; + + pinctrl_i2c8_default: i2c8_default { + function = "I2C8"; + groups = "I2C8"; + }; + + pinctrl_i2c9_default: i2c9_default { + function = "I2C9"; + groups = "I2C9"; + }; + + pinctrl_lpcpd_default: lpcpd_default { + function = "LPCPD"; + groups = "LPCPD"; + }; + + pinctrl_lpcpme_default: lpcpme_default { + function = "LPCPME"; + groups = "LPCPME"; + }; + + pinctrl_lpcrst_default: lpcrst_default { + function = "LPCRST"; + groups = "LPCRST"; + }; + + pinctrl_lpcsmi_default: lpcsmi_default { + function = "LPCSMI"; + groups = "LPCSMI"; + }; + + pinctrl_mac1link_default: mac1link_default { + function = "MAC1LINK"; + groups = "MAC1LINK"; + }; + + pinctrl_mac2link_default: mac2link_default { + function = "MAC2LINK"; + groups = "MAC2LINK"; + }; + + pinctrl_mdio1_default: mdio1_default { + function = "MDIO1"; + groups = "MDIO1"; + }; + + pinctrl_mdio2_default: mdio2_default { + function = "MDIO2"; + groups = "MDIO2"; + }; + + pinctrl_ncts1_default: ncts1_default { + function = "NCTS1"; + groups = "NCTS1"; + }; + + pinctrl_ncts2_default: ncts2_default { + function = "NCTS2"; + groups = "NCTS2"; + }; + + pinctrl_ncts3_default: ncts3_default { + function = "NCTS3"; + groups = "NCTS3"; + }; + + pinctrl_ncts4_default: ncts4_default { + function = "NCTS4"; + groups = "NCTS4"; + }; + + pinctrl_ndcd1_default: ndcd1_default { + function = "NDCD1"; + groups = "NDCD1"; + }; + + pinctrl_ndcd2_default: ndcd2_default { + function = "NDCD2"; + groups = "NDCD2"; + }; + + pinctrl_ndcd3_default: ndcd3_default { + function = "NDCD3"; + groups = "NDCD3"; + }; + + pinctrl_ndcd4_default: ndcd4_default { + function = "NDCD4"; + groups = "NDCD4"; + }; + + pinctrl_ndsr1_default: ndsr1_default { + function = "NDSR1"; + groups = "NDSR1"; + }; + + pinctrl_ndsr2_default: ndsr2_default { + function = "NDSR2"; + groups = "NDSR2"; + }; + + pinctrl_ndsr3_default: ndsr3_default { + function = "NDSR3"; + groups = "NDSR3"; + }; + + pinctrl_ndsr4_default: ndsr4_default { + function = "NDSR4"; + groups = "NDSR4"; + }; + + pinctrl_ndtr1_default: ndtr1_default { + function = "NDTR1"; + groups = "NDTR1"; + }; + + pinctrl_ndtr2_default: ndtr2_default { + function = "NDTR2"; + groups = "NDTR2"; + }; + + pinctrl_ndtr3_default: ndtr3_default { + function = "NDTR3"; + groups = "NDTR3"; + }; + + pinctrl_ndtr4_default: ndtr4_default { + function = "NDTR4"; + groups = "NDTR4"; + }; + + pinctrl_ndts4_default: ndts4_default { + function = "NDTS4"; + groups = "NDTS4"; + }; + + pinctrl_nri1_default: nri1_default { + function = "NRI1"; + groups = "NRI1"; + }; + + pinctrl_nri2_default: nri2_default { + function = "NRI2"; + groups = "NRI2"; + }; + + pinctrl_nri3_default: nri3_default { + function = "NRI3"; + groups = "NRI3"; + }; + + pinctrl_nri4_default: nri4_default { + function = "NRI4"; + groups = "NRI4"; + }; + + pinctrl_nrts1_default: nrts1_default { + function = "NRTS1"; + groups = "NRTS1"; + }; + + pinctrl_nrts2_default: nrts2_default { + function = "NRTS2"; + groups = "NRTS2"; + }; + + pinctrl_nrts3_default: nrts3_default { + function = "NRTS3"; + groups = "NRTS3"; + }; + + pinctrl_oscclk_default: oscclk_default { + function = "OSCCLK"; + groups = "OSCCLK"; + }; + + pinctrl_pwm0_default: pwm0_default { + function = "PWM0"; + groups = "PWM0"; + }; + + pinctrl_pwm1_default: pwm1_default { + function = "PWM1"; + groups = "PWM1"; + }; + + pinctrl_pwm2_default: pwm2_default { + function = "PWM2"; + groups = "PWM2"; + }; + + pinctrl_pwm3_default: pwm3_default { + function = "PWM3"; + groups = "PWM3"; + }; + + pinctrl_pwm4_default: pwm4_default { + function = "PWM4"; + groups = "PWM4"; + }; + + pinctrl_pwm5_default: pwm5_default { + function = "PWM5"; + groups = "PWM5"; + }; + + pinctrl_pwm6_default: pwm6_default { + function = "PWM6"; + groups = "PWM6"; + }; + + pinctrl_pwm7_default: pwm7_default { + function = "PWM7"; + groups = "PWM7"; + }; + + pinctrl_rgmii1_default: rgmii1_default { + function = "RGMII1"; + groups = "RGMII1"; + }; + + pinctrl_rgmii2_default: rgmii2_default { + function = "RGMII2"; + groups = "RGMII2"; + }; + + pinctrl_rmii1_default: rmii1_default { + function = "RMII1"; + groups = "RMII1"; + }; + + pinctrl_rmii2_default: rmii2_default { + function = "RMII2"; + groups = "RMII2"; + }; + + pinctrl_rom16_default: rom16_default { + function = "ROM16"; + groups = "ROM16"; + }; + + pinctrl_rom8_default: rom8_default { + function = "ROM8"; + groups = "ROM8"; + }; + + pinctrl_romcs1_default: romcs1_default { + function = "ROMCS1"; + groups = "ROMCS1"; + }; + + pinctrl_romcs2_default: romcs2_default { + function = "ROMCS2"; + groups = "ROMCS2"; + }; + + pinctrl_romcs3_default: romcs3_default { + function = "ROMCS3"; + groups = "ROMCS3"; + }; + + pinctrl_romcs4_default: romcs4_default { + function = "ROMCS4"; + groups = "ROMCS4"; + }; + + pinctrl_rxd1_default: rxd1_default { + function = "RXD1"; + groups = "RXD1"; + }; + + pinctrl_rxd2_default: rxd2_default { + function = "RXD2"; + groups = "RXD2"; + }; + + pinctrl_rxd3_default: rxd3_default { + function = "RXD3"; + groups = "RXD3"; + }; + + pinctrl_rxd4_default: rxd4_default { + function = "RXD4"; + groups = "RXD4"; + }; + + pinctrl_salt1_default: salt1_default { + function = "SALT1"; + groups = "SALT1"; + }; + + pinctrl_salt2_default: salt2_default { + function = "SALT2"; + groups = "SALT2"; + }; + + pinctrl_salt3_default: salt3_default { + function = "SALT3"; + groups = "SALT3"; + }; + + pinctrl_salt4_default: salt4_default { + function = "SALT4"; + groups = "SALT4"; + }; + + pinctrl_sd1_default: sd1_default { + function = "SD1"; + groups = "SD1"; + }; + + pinctrl_sd2_default: sd2_default { + function = "SD2"; + groups = "SD2"; + }; + + pinctrl_sgpmck_default: sgpmck_default { + function = "SGPMCK"; + groups = "SGPMCK"; + }; + + pinctrl_sgpmi_default: sgpmi_default { + function = "SGPMI"; + groups = "SGPMI"; + }; + + pinctrl_sgpmld_default: sgpmld_default { + function = "SGPMLD"; + groups = "SGPMLD"; + }; + + pinctrl_sgpmo_default: sgpmo_default { + function = "SGPMO"; + groups = "SGPMO"; + }; + + pinctrl_sgpsck_default: sgpsck_default { + function = "SGPSCK"; + groups = "SGPSCK"; + }; + + pinctrl_sgpsi0_default: sgpsi0_default { + function = "SGPSI0"; + groups = "SGPSI0"; + }; + + pinctrl_sgpsi1_default: sgpsi1_default { + function = "SGPSI1"; + groups = "SGPSI1"; + }; + + pinctrl_sgpsld_default: sgpsld_default { + function = "SGPSLD"; + groups = "SGPSLD"; + }; + + pinctrl_sioonctrl_default: sioonctrl_default { + function = "SIOONCTRL"; + groups = "SIOONCTRL"; + }; + + pinctrl_siopbi_default: siopbi_default { + function = "SIOPBI"; + groups = "SIOPBI"; + }; + + pinctrl_siopbo_default: siopbo_default { + function = "SIOPBO"; + groups = "SIOPBO"; + }; + + pinctrl_siopwreq_default: siopwreq_default { + function = "SIOPWREQ"; + groups = "SIOPWREQ"; + }; + + pinctrl_siopwrgd_default: siopwrgd_default { + function = "SIOPWRGD"; + groups = "SIOPWRGD"; + }; + + pinctrl_sios3_default: sios3_default { + function = "SIOS3"; + groups = "SIOS3"; + }; + + pinctrl_sios5_default: sios5_default { + function = "SIOS5"; + groups = "SIOS5"; + }; + + pinctrl_siosci_default: siosci_default { + function = "SIOSCI"; + groups = "SIOSCI"; + }; + + pinctrl_spi1_default: spi1_default { + function = "SPI1"; + groups = "SPI1"; + }; + + pinctrl_spi1debug_default: spi1debug_default { + function = "SPI1DEBUG"; + groups = "SPI1DEBUG"; + }; + + pinctrl_spi1passthru_default: spi1passthru_default { + function = "SPI1PASSTHRU"; + groups = "SPI1PASSTHRU"; + }; + + pinctrl_spics1_default: spics1_default { + function = "SPICS1"; + groups = "SPICS1"; + }; + + pinctrl_timer3_default: timer3_default { + function = "TIMER3"; + groups = "TIMER3"; + }; + + pinctrl_timer4_default: timer4_default { + function = "TIMER4"; + groups = "TIMER4"; + }; + + pinctrl_timer5_default: timer5_default { + function = "TIMER5"; + groups = "TIMER5"; + }; + + pinctrl_timer6_default: timer6_default { + function = "TIMER6"; + groups = "TIMER6"; + }; + + pinctrl_timer7_default: timer7_default { + function = "TIMER7"; + groups = "TIMER7"; + }; + + pinctrl_timer8_default: timer8_default { + function = "TIMER8"; + groups = "TIMER8"; + }; + + pinctrl_txd1_default: txd1_default { + function = "TXD1"; + groups = "TXD1"; + }; + + pinctrl_txd2_default: txd2_default { + function = "TXD2"; + groups = "TXD2"; + }; + + pinctrl_txd3_default: txd3_default { + function = "TXD3"; + groups = "TXD3"; + }; + + pinctrl_txd4_default: txd4_default { + function = "TXD4"; + groups = "TXD4"; + }; + + pinctrl_uart6_default: uart6_default { + function = "UART6"; + groups = "UART6"; + }; + + pinctrl_usbcki_default: usbcki_default { + function = "USBCKI"; + groups = "USBCKI"; + }; + + pinctrl_vgabios_rom_default: vgabios_rom_default { + function = "VGABIOS_ROM"; + groups = "VGABIOS_ROM"; + }; + + pinctrl_vgahs_default: vgahs_default { + function = "VGAHS"; + groups = "VGAHS"; + }; + + pinctrl_vgavs_default: vgavs_default { + function = "VGAVS"; + groups = "VGAVS"; + }; + + pinctrl_vpi18_default: vpi18_default { + function = "VPI18"; + groups = "VPI18"; + }; + + pinctrl_vpi24_default: vpi24_default { + function = "VPI24"; + groups = "VPI24"; + }; + + pinctrl_vpi30_default: vpi30_default { + function = "VPI30"; + groups = "VPI30"; + }; + + pinctrl_vpo12_default: vpo12_default { + function = "VPO12"; + groups = "VPO12"; + }; + + pinctrl_vpo24_default: vpo24_default { + function = "VPO24"; + groups = "VPO24"; + }; + + pinctrl_wdtrst1_default: wdtrst1_default { + function = "WDTRST1"; + groups = "WDTRST1"; + }; + + pinctrl_wdtrst2_default: wdtrst2_default { + function = "WDTRST2"; + groups = "WDTRST2"; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index eab8f549a6fed49351d86b5fa408c03545e19779..5c4ecdba3a6bc2e2d4ed5d669dcc116327e986e0 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -8,6 +8,29 @@ #size-cells = <1>; interrupt-parent = <&vic>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &vuart; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -145,7 +168,7 @@ clock-frequency = <198000000>; }; - clk_apb: clk_apb@08 { + clk_apb: clk_apb@8 { #clock-cells = <0>; compatible = "aspeed,g5-apb-clock", "fixed-clock"; reg = <0x08>; @@ -164,962 +187,1199 @@ compatible = "aspeed,g5-pinctrl"; aspeed,external-nodes = <&gfx &lhc>; - pinctrl_acpi_default: acpi_default { - function = "ACPI"; - groups = "ACPI"; - }; + }; - pinctrl_adc0_default: adc0_default { - function = "ADC0"; - groups = "ADC0"; - }; + }; - pinctrl_adc1_default: adc1_default { - function = "ADC1"; - groups = "ADC1"; - }; + gfx: display@1e6e6000 { + compatible = "aspeed,ast2500-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; + reg-io-width = <4>; + }; - pinctrl_adc10_default: adc10_default { - function = "ADC10"; - groups = "ADC10"; - }; + adc: adc@1e6e9000 { + compatible = "aspeed,ast2500-adc"; + reg = <0x1e6e9000 0xb0>; + clocks = <&clk_apb>; + #io-channel-cells = <1>; + status = "disabled"; + }; - pinctrl_adc11_default: adc11_default { - function = "ADC11"; - groups = "ADC11"; - }; + sram@1e720000 { + compatible = "mmio-sram"; + reg = <0x1e720000 0x9000>; // 36K + }; - pinctrl_adc12_default: adc12_default { - function = "ADC12"; - groups = "ADC12"; - }; + gpio: gpio@1e780000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2500-gpio"; + reg = <0x1e780000 0x1000>; + interrupts = <20>; + gpio-ranges = <&pinctrl 0 0 220>; + interrupt-controller; + }; - pinctrl_adc13_default: adc13_default { - function = "ADC13"; - groups = "ADC13"; - }; + timer: timer@1e782000 { + /* This timer is a Faraday FTTMR010 derivative */ + compatible = "aspeed,ast2400-timer"; + reg = <0x1e782000 0x90>; + interrupts = <16 17 18 35 36 37 38 39>; + clocks = <&clk_apb>; + clock-names = "PCLK"; + }; - pinctrl_adc14_default: adc14_default { - function = "ADC14"; - groups = "ADC14"; - }; + uart1: serial@1e783000 { + compatible = "ns16550a"; + reg = <0x1e783000 0x20>; + reg-shift = <2>; + interrupts = <9>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; - pinctrl_adc15_default: adc15_default { - function = "ADC15"; - groups = "ADC15"; - }; + uart5: serial@1e784000 { + compatible = "ns16550a"; + reg = <0x1e784000 0x20>; + reg-shift = <2>; + interrupts = <10>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; - pinctrl_adc2_default: adc2_default { - function = "ADC2"; - groups = "ADC2"; - }; + wdt1: watchdog@1e785000 { + compatible = "aspeed,ast2500-wdt"; + reg = <0x1e785000 0x20>; + }; - pinctrl_adc3_default: adc3_default { - function = "ADC3"; - groups = "ADC3"; - }; + wdt2: watchdog@1e785020 { + compatible = "aspeed,ast2500-wdt"; + reg = <0x1e785020 0x20>; + }; - pinctrl_adc4_default: adc4_default { - function = "ADC4"; - groups = "ADC4"; - }; + wdt3: watchdog@1e785040 { + compatible = "aspeed,ast2500-wdt"; + reg = <0x1e785040 0x20>; + status = "disabled"; + }; - pinctrl_adc5_default: adc5_default { - function = "ADC5"; - groups = "ADC5"; - }; + lpc: lpc@1e789000 { + compatible = "aspeed,ast2500-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; - pinctrl_adc6_default: adc6_default { - function = "ADC6"; - groups = "ADC6"; - }; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e789000 0x1000>; - pinctrl_adc7_default: adc7_default { - function = "ADC7"; - groups = "ADC7"; - }; + lpc_bmc: lpc-bmc@0 { + compatible = "aspeed,ast2500-lpc-bmc"; + reg = <0x0 0x80>; + }; - pinctrl_adc8_default: adc8_default { - function = "ADC8"; - groups = "ADC8"; - }; + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; - pinctrl_adc9_default: adc9_default { - function = "ADC9"; - groups = "ADC9"; - }; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80 0x1e0>; - pinctrl_bmcint_default: bmcint_default { - function = "BMCINT"; - groups = "BMCINT"; - }; + reg-io-width = <4>; - pinctrl_ddcclk_default: ddcclk_default { - function = "DDCCLK"; - groups = "DDCCLK"; + lhc: lhc@20 { + compatible = "aspeed,ast2500-lhc"; + reg = <0x20 0x24 0x48 0x8>; }; + }; + }; - pinctrl_ddcdat_default: ddcdat_default { - function = "DDCDAT"; - groups = "DDCDAT"; - }; + vuart: serial@1e787000 { + compatible = "aspeed,ast2500-vuart"; + reg = <0x1e787000 0x40>; + reg-shift = <2>; + interrupts = <10>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; - pinctrl_espi_default: espi_default { - function = "ESPI"; - groups = "ESPI"; - }; + uart2: serial@1e78d000 { + compatible = "ns16550a"; + reg = <0x1e78d000 0x20>; + reg-shift = <2>; + interrupts = <32>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; - pinctrl_fwspics1_default: fwspics1_default { - function = "FWSPICS1"; - groups = "FWSPICS1"; - }; + uart3: serial@1e78e000 { + compatible = "ns16550a"; + reg = <0x1e78e000 0x20>; + reg-shift = <2>; + interrupts = <33>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; - pinctrl_fwspics2_default: fwspics2_default { - function = "FWSPICS2"; - groups = "FWSPICS2"; - }; + uart4: serial@1e78f000 { + compatible = "ns16550a"; + reg = <0x1e78f000 0x20>; + reg-shift = <2>; + interrupts = <34>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; - pinctrl_gpid0_default: gpid0_default { - function = "GPID0"; - groups = "GPID0"; - }; + i2c: i2c@1e78a000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e78a000 0x1000>; + }; + }; + }; +}; - pinctrl_gpid2_default: gpid2_default { - function = "GPID2"; - groups = "GPID2"; - }; +&i2c { + i2c_ic: interrupt-controller@0 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2500-i2c-ic"; + reg = <0x0 0x40>; + interrupts = <12>; + interrupt-controller; + }; - pinctrl_gpid4_default: gpid4_default { - function = "GPID4"; - groups = "GPID4"; - }; + i2c0: i2c-bus@40 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x40 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <0>; + interrupt-parent = <&i2c_ic>; + status = "disabled"; + /* Does not need pinctrl properties */ + }; - pinctrl_gpid6_default: gpid6_default { - function = "GPID6"; - groups = "GPID6"; - }; + i2c1: i2c-bus@80 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x80 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <1>; + interrupt-parent = <&i2c_ic>; + status = "disabled"; + /* Does not need pinctrl properties */ + }; - pinctrl_gpie0_default: gpie0_default { - function = "GPIE0"; - groups = "GPIE0"; - }; + i2c2: i2c-bus@c0 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0xc0 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <2>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + status = "disabled"; + }; - pinctrl_gpie2_default: gpie2_default { - function = "GPIE2"; - groups = "GPIE2"; - }; + i2c3: i2c-bus@100 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x100 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <3>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + status = "disabled"; + }; - pinctrl_gpie4_default: gpie4_default { - function = "GPIE4"; - groups = "GPIE4"; - }; + i2c4: i2c-bus@140 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x140 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <4>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + status = "disabled"; + }; - pinctrl_gpie6_default: gpie6_default { - function = "GPIE6"; - groups = "GPIE6"; - }; + i2c5: i2c-bus@180 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x180 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <5>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6_default>; + status = "disabled"; + }; - pinctrl_i2c10_default: i2c10_default { - function = "I2C10"; - groups = "I2C10"; - }; + i2c6: i2c-bus@1c0 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x1c0 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <6>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c7_default>; + status = "disabled"; + }; - pinctrl_i2c11_default: i2c11_default { - function = "I2C11"; - groups = "I2C11"; - }; + i2c7: i2c-bus@300 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x300 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <7>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c8_default>; + status = "disabled"; + }; - pinctrl_i2c12_default: i2c12_default { - function = "I2C12"; - groups = "I2C12"; - }; + i2c8: i2c-bus@340 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x340 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <8>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c9_default>; + status = "disabled"; + }; - pinctrl_i2c13_default: i2c13_default { - function = "I2C13"; - groups = "I2C13"; - }; + i2c9: i2c-bus@380 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x380 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <9>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + status = "disabled"; + }; - pinctrl_i2c14_default: i2c14_default { - function = "I2C14"; - groups = "I2C14"; - }; + i2c10: i2c-bus@3c0 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x3c0 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <10>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + status = "disabled"; + }; - pinctrl_i2c3_default: i2c3_default { - function = "I2C3"; - groups = "I2C3"; - }; + i2c11: i2c-bus@400 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x400 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <11>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c12_default>; + status = "disabled"; + }; - pinctrl_i2c4_default: i2c4_default { - function = "I2C4"; - groups = "I2C4"; - }; + i2c12: i2c-bus@440 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x440 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <12>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c13_default>; + status = "disabled"; + }; - pinctrl_i2c5_default: i2c5_default { - function = "I2C5"; - groups = "I2C5"; - }; + i2c13: i2c-bus@480 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x480 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <13>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c14_default>; + status = "disabled"; + }; +}; - pinctrl_i2c6_default: i2c6_default { - function = "I2C6"; - groups = "I2C6"; - }; +&pinctrl { + pinctrl_acpi_default: acpi_default { + function = "ACPI"; + groups = "ACPI"; + }; - pinctrl_i2c7_default: i2c7_default { - function = "I2C7"; - groups = "I2C7"; - }; + pinctrl_adc0_default: adc0_default { + function = "ADC0"; + groups = "ADC0"; + }; - pinctrl_i2c8_default: i2c8_default { - function = "I2C8"; - groups = "I2C8"; - }; + pinctrl_adc1_default: adc1_default { + function = "ADC1"; + groups = "ADC1"; + }; - pinctrl_i2c9_default: i2c9_default { - function = "I2C9"; - groups = "I2C9"; - }; + pinctrl_adc10_default: adc10_default { + function = "ADC10"; + groups = "ADC10"; + }; - pinctrl_lad0_default: lad0_default { - function = "LAD0"; - groups = "LAD0"; - }; - pinctrl_lad1_default: lad1_default { - function = "LAD1"; - groups = "LAD1"; - }; + pinctrl_adc11_default: adc11_default { + function = "ADC11"; + groups = "ADC11"; + }; - pinctrl_lad2_default: lad2_default { - function = "LAD2"; - groups = "LAD2"; - }; + pinctrl_adc12_default: adc12_default { + function = "ADC12"; + groups = "ADC12"; + }; - pinctrl_lad3_default: lad3_default { - function = "LAD3"; - groups = "LAD3"; - }; + pinctrl_adc13_default: adc13_default { + function = "ADC13"; + groups = "ADC13"; + }; - pinctrl_lclk_default: lclk_default { - function = "LCLK"; - groups = "LCLK"; - }; + pinctrl_adc14_default: adc14_default { + function = "ADC14"; + groups = "ADC14"; + }; - pinctrl_lframe_default: lframe_default { - function = "LFRAME"; - groups = "LFRAME"; - }; + pinctrl_adc15_default: adc15_default { + function = "ADC15"; + groups = "ADC15"; + }; - pinctrl_lpchc_default: lpchc_default { - function = "LPCHC"; - groups = "LPCHC"; - }; + pinctrl_adc2_default: adc2_default { + function = "ADC2"; + groups = "ADC2"; + }; - pinctrl_lpcpd_default: lpcpd_default { - function = "LPCPD"; - groups = "LPCPD"; - }; + pinctrl_adc3_default: adc3_default { + function = "ADC3"; + groups = "ADC3"; + }; - pinctrl_lpcplus_default: lpcplus_default { - function = "LPCPLUS"; - groups = "LPCPLUS"; - }; + pinctrl_adc4_default: adc4_default { + function = "ADC4"; + groups = "ADC4"; + }; - pinctrl_lpcpme_default: lpcpme_default { - function = "LPCPME"; - groups = "LPCPME"; - }; + pinctrl_adc5_default: adc5_default { + function = "ADC5"; + groups = "ADC5"; + }; - pinctrl_lpcrst_default: lpcrst_default { - function = "LPCRST"; - groups = "LPCRST"; - }; + pinctrl_adc6_default: adc6_default { + function = "ADC6"; + groups = "ADC6"; + }; - pinctrl_lpcsmi_default: lpcsmi_default { - function = "LPCSMI"; - groups = "LPCSMI"; - }; + pinctrl_adc7_default: adc7_default { + function = "ADC7"; + groups = "ADC7"; + }; - pinctrl_lsirq_default: lsirq_default { - function = "LSIRQ"; - groups = "LSIRQ"; - }; + pinctrl_adc8_default: adc8_default { + function = "ADC8"; + groups = "ADC8"; + }; - pinctrl_mac1link_default: mac1link_default { - function = "MAC1LINK"; - groups = "MAC1LINK"; - }; + pinctrl_adc9_default: adc9_default { + function = "ADC9"; + groups = "ADC9"; + }; - pinctrl_mac2link_default: mac2link_default { - function = "MAC2LINK"; - groups = "MAC2LINK"; - }; + pinctrl_bmcint_default: bmcint_default { + function = "BMCINT"; + groups = "BMCINT"; + }; - pinctrl_mdio1_default: mdio1_default { - function = "MDIO1"; - groups = "MDIO1"; - }; + pinctrl_ddcclk_default: ddcclk_default { + function = "DDCCLK"; + groups = "DDCCLK"; + }; - pinctrl_mdio2_default: mdio2_default { - function = "MDIO2"; - groups = "MDIO2"; - }; + pinctrl_ddcdat_default: ddcdat_default { + function = "DDCDAT"; + groups = "DDCDAT"; + }; - pinctrl_ncts1_default: ncts1_default { - function = "NCTS1"; - groups = "NCTS1"; - }; + pinctrl_espi_default: espi_default { + function = "ESPI"; + groups = "ESPI"; + }; - pinctrl_ncts2_default: ncts2_default { - function = "NCTS2"; - groups = "NCTS2"; - }; + pinctrl_fwspics1_default: fwspics1_default { + function = "FWSPICS1"; + groups = "FWSPICS1"; + }; - pinctrl_ncts3_default: ncts3_default { - function = "NCTS3"; - groups = "NCTS3"; - }; + pinctrl_fwspics2_default: fwspics2_default { + function = "FWSPICS2"; + groups = "FWSPICS2"; + }; - pinctrl_ncts4_default: ncts4_default { - function = "NCTS4"; - groups = "NCTS4"; - }; + pinctrl_gpid0_default: gpid0_default { + function = "GPID0"; + groups = "GPID0"; + }; - pinctrl_ndcd1_default: ndcd1_default { - function = "NDCD1"; - groups = "NDCD1"; - }; + pinctrl_gpid2_default: gpid2_default { + function = "GPID2"; + groups = "GPID2"; + }; - pinctrl_ndcd2_default: ndcd2_default { - function = "NDCD2"; - groups = "NDCD2"; - }; + pinctrl_gpid4_default: gpid4_default { + function = "GPID4"; + groups = "GPID4"; + }; - pinctrl_ndcd3_default: ndcd3_default { - function = "NDCD3"; - groups = "NDCD3"; - }; + pinctrl_gpid6_default: gpid6_default { + function = "GPID6"; + groups = "GPID6"; + }; - pinctrl_ndcd4_default: ndcd4_default { - function = "NDCD4"; - groups = "NDCD4"; - }; + pinctrl_gpie0_default: gpie0_default { + function = "GPIE0"; + groups = "GPIE0"; + }; - pinctrl_ndsr1_default: ndsr1_default { - function = "NDSR1"; - groups = "NDSR1"; - }; + pinctrl_gpie2_default: gpie2_default { + function = "GPIE2"; + groups = "GPIE2"; + }; - pinctrl_ndsr2_default: ndsr2_default { - function = "NDSR2"; - groups = "NDSR2"; - }; + pinctrl_gpie4_default: gpie4_default { + function = "GPIE4"; + groups = "GPIE4"; + }; - pinctrl_ndsr3_default: ndsr3_default { - function = "NDSR3"; - groups = "NDSR3"; - }; + pinctrl_gpie6_default: gpie6_default { + function = "GPIE6"; + groups = "GPIE6"; + }; - pinctrl_ndsr4_default: ndsr4_default { - function = "NDSR4"; - groups = "NDSR4"; - }; + pinctrl_i2c10_default: i2c10_default { + function = "I2C10"; + groups = "I2C10"; + }; - pinctrl_ndtr1_default: ndtr1_default { - function = "NDTR1"; - groups = "NDTR1"; - }; + pinctrl_i2c11_default: i2c11_default { + function = "I2C11"; + groups = "I2C11"; + }; - pinctrl_ndtr2_default: ndtr2_default { - function = "NDTR2"; - groups = "NDTR2"; - }; + pinctrl_i2c12_default: i2c12_default { + function = "I2C12"; + groups = "I2C12"; + }; - pinctrl_ndtr3_default: ndtr3_default { - function = "NDTR3"; - groups = "NDTR3"; - }; + pinctrl_i2c13_default: i2c13_default { + function = "I2C13"; + groups = "I2C13"; + }; - pinctrl_ndtr4_default: ndtr4_default { - function = "NDTR4"; - groups = "NDTR4"; - }; + pinctrl_i2c14_default: i2c14_default { + function = "I2C14"; + groups = "I2C14"; + }; - pinctrl_nri1_default: nri1_default { - function = "NRI1"; - groups = "NRI1"; - }; + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; - pinctrl_nri2_default: nri2_default { - function = "NRI2"; - groups = "NRI2"; - }; + pinctrl_i2c4_default: i2c4_default { + function = "I2C4"; + groups = "I2C4"; + }; - pinctrl_nri3_default: nri3_default { - function = "NRI3"; - groups = "NRI3"; - }; + pinctrl_i2c5_default: i2c5_default { + function = "I2C5"; + groups = "I2C5"; + }; - pinctrl_nri4_default: nri4_default { - function = "NRI4"; - groups = "NRI4"; - }; + pinctrl_i2c6_default: i2c6_default { + function = "I2C6"; + groups = "I2C6"; + }; - pinctrl_nrts1_default: nrts1_default { - function = "NRTS1"; - groups = "NRTS1"; - }; + pinctrl_i2c7_default: i2c7_default { + function = "I2C7"; + groups = "I2C7"; + }; - pinctrl_nrts2_default: nrts2_default { - function = "NRTS2"; - groups = "NRTS2"; - }; + pinctrl_i2c8_default: i2c8_default { + function = "I2C8"; + groups = "I2C8"; + }; - pinctrl_nrts3_default: nrts3_default { - function = "NRTS3"; - groups = "NRTS3"; - }; + pinctrl_i2c9_default: i2c9_default { + function = "I2C9"; + groups = "I2C9"; + }; - pinctrl_nrts4_default: nrts4_default { - function = "NRTS4"; - groups = "NRTS4"; - }; + pinctrl_lad0_default: lad0_default { + function = "LAD0"; + groups = "LAD0"; + }; - pinctrl_oscclk_default: oscclk_default { - function = "OSCCLK"; - groups = "OSCCLK"; - }; + pinctrl_lad1_default: lad1_default { + function = "LAD1"; + groups = "LAD1"; + }; - pinctrl_pewake_default: pewake_default { - function = "PEWAKE"; - groups = "PEWAKE"; - }; + pinctrl_lad2_default: lad2_default { + function = "LAD2"; + groups = "LAD2"; + }; - pinctrl_pnor_default: pnor_default { - function = "PNOR"; - groups = "PNOR"; - }; + pinctrl_lad3_default: lad3_default { + function = "LAD3"; + groups = "LAD3"; + }; - pinctrl_pwm0_default: pwm0_default { - function = "PWM0"; - groups = "PWM0"; - }; + pinctrl_lclk_default: lclk_default { + function = "LCLK"; + groups = "LCLK"; + }; - pinctrl_pwm1_default: pwm1_default { - function = "PWM1"; - groups = "PWM1"; - }; + pinctrl_lframe_default: lframe_default { + function = "LFRAME"; + groups = "LFRAME"; + }; - pinctrl_pwm2_default: pwm2_default { - function = "PWM2"; - groups = "PWM2"; - }; + pinctrl_lpchc_default: lpchc_default { + function = "LPCHC"; + groups = "LPCHC"; + }; - pinctrl_pwm3_default: pwm3_default { - function = "PWM3"; - groups = "PWM3"; - }; + pinctrl_lpcpd_default: lpcpd_default { + function = "LPCPD"; + groups = "LPCPD"; + }; - pinctrl_pwm4_default: pwm4_default { - function = "PWM4"; - groups = "PWM4"; - }; + pinctrl_lpcplus_default: lpcplus_default { + function = "LPCPLUS"; + groups = "LPCPLUS"; + }; - pinctrl_pwm5_default: pwm5_default { - function = "PWM5"; - groups = "PWM5"; - }; + pinctrl_lpcpme_default: lpcpme_default { + function = "LPCPME"; + groups = "LPCPME"; + }; - pinctrl_pwm6_default: pwm6_default { - function = "PWM6"; - groups = "PWM6"; - }; + pinctrl_lpcrst_default: lpcrst_default { + function = "LPCRST"; + groups = "LPCRST"; + }; - pinctrl_pwm7_default: pwm7_default { - function = "PWM7"; - groups = "PWM7"; - }; + pinctrl_lpcsmi_default: lpcsmi_default { + function = "LPCSMI"; + groups = "LPCSMI"; + }; - pinctrl_rgmii1_default: rgmii1_default { - function = "RGMII1"; - groups = "RGMII1"; - }; + pinctrl_lsirq_default: lsirq_default { + function = "LSIRQ"; + groups = "LSIRQ"; + }; - pinctrl_rgmii2_default: rgmii2_default { - function = "RGMII2"; - groups = "RGMII2"; - }; + pinctrl_mac1link_default: mac1link_default { + function = "MAC1LINK"; + groups = "MAC1LINK"; + }; - pinctrl_rmii1_default: rmii1_default { - function = "RMII1"; - groups = "RMII1"; - }; + pinctrl_mac2link_default: mac2link_default { + function = "MAC2LINK"; + groups = "MAC2LINK"; + }; - pinctrl_rmii2_default: rmii2_default { - function = "RMII2"; - groups = "RMII2"; - }; + pinctrl_mdio1_default: mdio1_default { + function = "MDIO1"; + groups = "MDIO1"; + }; - pinctrl_rxd1_default: rxd1_default { - function = "RXD1"; - groups = "RXD1"; - }; + pinctrl_mdio2_default: mdio2_default { + function = "MDIO2"; + groups = "MDIO2"; + }; - pinctrl_rxd2_default: rxd2_default { - function = "RXD2"; - groups = "RXD2"; - }; + pinctrl_ncts1_default: ncts1_default { + function = "NCTS1"; + groups = "NCTS1"; + }; - pinctrl_rxd3_default: rxd3_default { - function = "RXD3"; - groups = "RXD3"; - }; + pinctrl_ncts2_default: ncts2_default { + function = "NCTS2"; + groups = "NCTS2"; + }; - pinctrl_rxd4_default: rxd4_default { - function = "RXD4"; - groups = "RXD4"; - }; + pinctrl_ncts3_default: ncts3_default { + function = "NCTS3"; + groups = "NCTS3"; + }; - pinctrl_salt1_default: salt1_default { - function = "SALT1"; - groups = "SALT1"; - }; + pinctrl_ncts4_default: ncts4_default { + function = "NCTS4"; + groups = "NCTS4"; + }; - pinctrl_salt10_default: salt10_default { - function = "SALT10"; - groups = "SALT10"; - }; + pinctrl_ndcd1_default: ndcd1_default { + function = "NDCD1"; + groups = "NDCD1"; + }; - pinctrl_salt11_default: salt11_default { - function = "SALT11"; - groups = "SALT11"; - }; + pinctrl_ndcd2_default: ndcd2_default { + function = "NDCD2"; + groups = "NDCD2"; + }; - pinctrl_salt12_default: salt12_default { - function = "SALT12"; - groups = "SALT12"; - }; + pinctrl_ndcd3_default: ndcd3_default { + function = "NDCD3"; + groups = "NDCD3"; + }; - pinctrl_salt13_default: salt13_default { - function = "SALT13"; - groups = "SALT13"; - }; + pinctrl_ndcd4_default: ndcd4_default { + function = "NDCD4"; + groups = "NDCD4"; + }; - pinctrl_salt14_default: salt14_default { - function = "SALT14"; - groups = "SALT14"; - }; + pinctrl_ndsr1_default: ndsr1_default { + function = "NDSR1"; + groups = "NDSR1"; + }; - pinctrl_salt2_default: salt2_default { - function = "SALT2"; - groups = "SALT2"; - }; + pinctrl_ndsr2_default: ndsr2_default { + function = "NDSR2"; + groups = "NDSR2"; + }; - pinctrl_salt3_default: salt3_default { - function = "SALT3"; - groups = "SALT3"; - }; + pinctrl_ndsr3_default: ndsr3_default { + function = "NDSR3"; + groups = "NDSR3"; + }; - pinctrl_salt4_default: salt4_default { - function = "SALT4"; - groups = "SALT4"; - }; + pinctrl_ndsr4_default: ndsr4_default { + function = "NDSR4"; + groups = "NDSR4"; + }; - pinctrl_salt5_default: salt5_default { - function = "SALT5"; - groups = "SALT5"; - }; + pinctrl_ndtr1_default: ndtr1_default { + function = "NDTR1"; + groups = "NDTR1"; + }; - pinctrl_salt6_default: salt6_default { - function = "SALT6"; - groups = "SALT6"; - }; + pinctrl_ndtr2_default: ndtr2_default { + function = "NDTR2"; + groups = "NDTR2"; + }; - pinctrl_salt7_default: salt7_default { - function = "SALT7"; - groups = "SALT7"; - }; + pinctrl_ndtr3_default: ndtr3_default { + function = "NDTR3"; + groups = "NDTR3"; + }; - pinctrl_salt8_default: salt8_default { - function = "SALT8"; - groups = "SALT8"; - }; + pinctrl_ndtr4_default: ndtr4_default { + function = "NDTR4"; + groups = "NDTR4"; + }; - pinctrl_salt9_default: salt9_default { - function = "SALT9"; - groups = "SALT9"; - }; + pinctrl_nri1_default: nri1_default { + function = "NRI1"; + groups = "NRI1"; + }; - pinctrl_scl1_default: scl1_default { - function = "SCL1"; - groups = "SCL1"; - }; + pinctrl_nri2_default: nri2_default { + function = "NRI2"; + groups = "NRI2"; + }; - pinctrl_scl2_default: scl2_default { - function = "SCL2"; - groups = "SCL2"; - }; + pinctrl_nri3_default: nri3_default { + function = "NRI3"; + groups = "NRI3"; + }; - pinctrl_sd1_default: sd1_default { - function = "SD1"; - groups = "SD1"; - }; + pinctrl_nri4_default: nri4_default { + function = "NRI4"; + groups = "NRI4"; + }; - pinctrl_sd2_default: sd2_default { - function = "SD2"; - groups = "SD2"; - }; + pinctrl_nrts1_default: nrts1_default { + function = "NRTS1"; + groups = "NRTS1"; + }; - pinctrl_sda1_default: sda1_default { - function = "SDA1"; - groups = "SDA1"; - }; + pinctrl_nrts2_default: nrts2_default { + function = "NRTS2"; + groups = "NRTS2"; + }; - pinctrl_sda2_default: sda2_default { - function = "SDA2"; - groups = "SDA2"; - }; + pinctrl_nrts3_default: nrts3_default { + function = "NRTS3"; + groups = "NRTS3"; + }; - pinctrl_sgps1_default: sgps1_default { - function = "SGPS1"; - groups = "SGPS1"; - }; + pinctrl_nrts4_default: nrts4_default { + function = "NRTS4"; + groups = "NRTS4"; + }; - pinctrl_sgps2_default: sgps2_default { - function = "SGPS2"; - groups = "SGPS2"; - }; + pinctrl_oscclk_default: oscclk_default { + function = "OSCCLK"; + groups = "OSCCLK"; + }; - pinctrl_sioonctrl_default: sioonctrl_default { - function = "SIOONCTRL"; - groups = "SIOONCTRL"; - }; + pinctrl_pewake_default: pewake_default { + function = "PEWAKE"; + groups = "PEWAKE"; + }; - pinctrl_siopbi_default: siopbi_default { - function = "SIOPBI"; - groups = "SIOPBI"; - }; + pinctrl_pnor_default: pnor_default { + function = "PNOR"; + groups = "PNOR"; + }; - pinctrl_siopbo_default: siopbo_default { - function = "SIOPBO"; - groups = "SIOPBO"; - }; + pinctrl_pwm0_default: pwm0_default { + function = "PWM0"; + groups = "PWM0"; + }; - pinctrl_siopwreq_default: siopwreq_default { - function = "SIOPWREQ"; - groups = "SIOPWREQ"; - }; + pinctrl_pwm1_default: pwm1_default { + function = "PWM1"; + groups = "PWM1"; + }; - pinctrl_siopwrgd_default: siopwrgd_default { - function = "SIOPWRGD"; - groups = "SIOPWRGD"; - }; + pinctrl_pwm2_default: pwm2_default { + function = "PWM2"; + groups = "PWM2"; + }; - pinctrl_sios3_default: sios3_default { - function = "SIOS3"; - groups = "SIOS3"; - }; + pinctrl_pwm3_default: pwm3_default { + function = "PWM3"; + groups = "PWM3"; + }; - pinctrl_sios5_default: sios5_default { - function = "SIOS5"; - groups = "SIOS5"; - }; + pinctrl_pwm4_default: pwm4_default { + function = "PWM4"; + groups = "PWM4"; + }; - pinctrl_siosci_default: siosci_default { - function = "SIOSCI"; - groups = "SIOSCI"; - }; + pinctrl_pwm5_default: pwm5_default { + function = "PWM5"; + groups = "PWM5"; + }; - pinctrl_spi1_default: spi1_default { - function = "SPI1"; - groups = "SPI1"; - }; + pinctrl_pwm6_default: pwm6_default { + function = "PWM6"; + groups = "PWM6"; + }; - pinctrl_spi1cs1_default: spi1cs1_default { - function = "SPI1CS1"; - groups = "SPI1CS1"; - }; + pinctrl_pwm7_default: pwm7_default { + function = "PWM7"; + groups = "PWM7"; + }; - pinctrl_spi1debug_default: spi1debug_default { - function = "SPI1DEBUG"; - groups = "SPI1DEBUG"; - }; + pinctrl_rgmii1_default: rgmii1_default { + function = "RGMII1"; + groups = "RGMII1"; + }; - pinctrl_spi1passthru_default: spi1passthru_default { - function = "SPI1PASSTHRU"; - groups = "SPI1PASSTHRU"; - }; + pinctrl_rgmii2_default: rgmii2_default { + function = "RGMII2"; + groups = "RGMII2"; + }; - pinctrl_spi2ck_default: spi2ck_default { - function = "SPI2CK"; - groups = "SPI2CK"; - }; + pinctrl_rmii1_default: rmii1_default { + function = "RMII1"; + groups = "RMII1"; + }; - pinctrl_spi2cs0_default: spi2cs0_default { - function = "SPI2CS0"; - groups = "SPI2CS0"; - }; + pinctrl_rmii2_default: rmii2_default { + function = "RMII2"; + groups = "RMII2"; + }; - pinctrl_spi2cs1_default: spi2cs1_default { - function = "SPI2CS1"; - groups = "SPI2CS1"; - }; + pinctrl_rxd1_default: rxd1_default { + function = "RXD1"; + groups = "RXD1"; + }; - pinctrl_spi2miso_default: spi2miso_default { - function = "SPI2MISO"; - groups = "SPI2MISO"; - }; + pinctrl_rxd2_default: rxd2_default { + function = "RXD2"; + groups = "RXD2"; + }; - pinctrl_spi2mosi_default: spi2mosi_default { - function = "SPI2MOSI"; - groups = "SPI2MOSI"; - }; + pinctrl_rxd3_default: rxd3_default { + function = "RXD3"; + groups = "RXD3"; + }; - pinctrl_timer3_default: timer3_default { - function = "TIMER3"; - groups = "TIMER3"; - }; + pinctrl_rxd4_default: rxd4_default { + function = "RXD4"; + groups = "RXD4"; + }; - pinctrl_timer4_default: timer4_default { - function = "TIMER4"; - groups = "TIMER4"; - }; + pinctrl_salt1_default: salt1_default { + function = "SALT1"; + groups = "SALT1"; + }; - pinctrl_timer5_default: timer5_default { - function = "TIMER5"; - groups = "TIMER5"; - }; + pinctrl_salt10_default: salt10_default { + function = "SALT10"; + groups = "SALT10"; + }; - pinctrl_timer6_default: timer6_default { - function = "TIMER6"; - groups = "TIMER6"; - }; + pinctrl_salt11_default: salt11_default { + function = "SALT11"; + groups = "SALT11"; + }; - pinctrl_timer7_default: timer7_default { - function = "TIMER7"; - groups = "TIMER7"; - }; + pinctrl_salt12_default: salt12_default { + function = "SALT12"; + groups = "SALT12"; + }; - pinctrl_timer8_default: timer8_default { - function = "TIMER8"; - groups = "TIMER8"; - }; + pinctrl_salt13_default: salt13_default { + function = "SALT13"; + groups = "SALT13"; + }; - pinctrl_txd1_default: txd1_default { - function = "TXD1"; - groups = "TXD1"; - }; + pinctrl_salt14_default: salt14_default { + function = "SALT14"; + groups = "SALT14"; + }; - pinctrl_txd2_default: txd2_default { - function = "TXD2"; - groups = "TXD2"; - }; + pinctrl_salt2_default: salt2_default { + function = "SALT2"; + groups = "SALT2"; + }; - pinctrl_txd3_default: txd3_default { - function = "TXD3"; - groups = "TXD3"; - }; + pinctrl_salt3_default: salt3_default { + function = "SALT3"; + groups = "SALT3"; + }; - pinctrl_txd4_default: txd4_default { - function = "TXD4"; - groups = "TXD4"; - }; + pinctrl_salt4_default: salt4_default { + function = "SALT4"; + groups = "SALT4"; + }; - pinctrl_uart6_default: uart6_default { - function = "UART6"; - groups = "UART6"; - }; + pinctrl_salt5_default: salt5_default { + function = "SALT5"; + groups = "SALT5"; + }; - pinctrl_usbcki_default: usbcki_default { - function = "USBCKI"; - groups = "USBCKI"; - }; + pinctrl_salt6_default: salt6_default { + function = "SALT6"; + groups = "SALT6"; + }; - pinctrl_vgabiosrom_default: vgabiosrom_default { - function = "VGABIOSROM"; - groups = "VGABIOSROM"; - }; + pinctrl_salt7_default: salt7_default { + function = "SALT7"; + groups = "SALT7"; + }; - pinctrl_vgahs_default: vgahs_default { - function = "VGAHS"; - groups = "VGAHS"; - }; + pinctrl_salt8_default: salt8_default { + function = "SALT8"; + groups = "SALT8"; + }; - pinctrl_vgavs_default: vgavs_default { - function = "VGAVS"; - groups = "VGAVS"; - }; + pinctrl_salt9_default: salt9_default { + function = "SALT9"; + groups = "SALT9"; + }; - pinctrl_vpi24_default: vpi24_default { - function = "VPI24"; - groups = "VPI24"; - }; + pinctrl_scl1_default: scl1_default { + function = "SCL1"; + groups = "SCL1"; + }; - pinctrl_vpo_default: vpo_default { - function = "VPO"; - groups = "VPO"; - }; + pinctrl_scl2_default: scl2_default { + function = "SCL2"; + groups = "SCL2"; + }; - pinctrl_wdtrst1_default: wdtrst1_default { - function = "WDTRST1"; - groups = "WDTRST1"; - }; + pinctrl_sd1_default: sd1_default { + function = "SD1"; + groups = "SD1"; + }; - pinctrl_wdtrst2_default: wdtrst2_default { - function = "WDTRST2"; - groups = "WDTRST2"; - }; + pinctrl_sd2_default: sd2_default { + function = "SD2"; + groups = "SD2"; + }; - }; + pinctrl_sda1_default: sda1_default { + function = "SDA1"; + groups = "SDA1"; + }; - }; + pinctrl_sda2_default: sda2_default { + function = "SDA2"; + groups = "SDA2"; + }; - gfx: display@1e6e6000 { - compatible = "aspeed,ast2500-gfx", "syscon"; - reg = <0x1e6e6000 0x1000>; - reg-io-width = <4>; - }; + pinctrl_sgps1_default: sgps1_default { + function = "SGPS1"; + groups = "SGPS1"; + }; - sram@1e720000 { - compatible = "mmio-sram"; - reg = <0x1e720000 0x9000>; // 36K - }; + pinctrl_sgps2_default: sgps2_default { + function = "SGPS2"; + groups = "SGPS2"; + }; - gpio: gpio@1e780000 { - #gpio-cells = <2>; - gpio-controller; - compatible = "aspeed,ast2500-gpio"; - reg = <0x1e780000 0x1000>; - interrupts = <20>; - gpio-ranges = <&pinctrl 0 0 220>; - interrupt-controller; - }; + pinctrl_sioonctrl_default: sioonctrl_default { + function = "SIOONCTRL"; + groups = "SIOONCTRL"; + }; - timer: timer@1e782000 { - /* This timer is a Faraday FTTMR010 derivative */ - compatible = "aspeed,ast2400-timer"; - reg = <0x1e782000 0x90>; - interrupts = <16 17 18 35 36 37 38 39>; - clocks = <&clk_apb>; - clock-names = "PCLK"; - }; + pinctrl_siopbi_default: siopbi_default { + function = "SIOPBI"; + groups = "SIOPBI"; + }; + pinctrl_siopbo_default: siopbo_default { + function = "SIOPBO"; + groups = "SIOPBO"; + }; - wdt1: wdt@1e785000 { - compatible = "aspeed,ast2500-wdt"; - reg = <0x1e785000 0x20>; - interrupts = <27>; - }; + pinctrl_siopwreq_default: siopwreq_default { + function = "SIOPWREQ"; + groups = "SIOPWREQ"; + }; - wdt2: wdt@1e785020 { - compatible = "aspeed,ast2500-wdt"; - reg = <0x1e785020 0x20>; - interrupts = <27>; - status = "disabled"; - }; + pinctrl_siopwrgd_default: siopwrgd_default { + function = "SIOPWRGD"; + groups = "SIOPWRGD"; + }; - wdt3: wdt@1e785040 { - compatible = "aspeed,ast2500-wdt"; - reg = <0x1e785040 0x20>; - status = "disabled"; - }; + pinctrl_sios3_default: sios3_default { + function = "SIOS3"; + groups = "SIOS3"; + }; - uart1: serial@1e783000 { - compatible = "ns16550a"; - reg = <0x1e783000 0x1000>; - reg-shift = <2>; - interrupts = <9>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; + pinctrl_sios5_default: sios5_default { + function = "SIOS5"; + groups = "SIOS5"; + }; - lpc: lpc@1e789000 { - compatible = "aspeed,ast2500-lpc", "simple-mfd"; - reg = <0x1e789000 0x1000>; + pinctrl_siosci_default: siosci_default { + function = "SIOSCI"; + groups = "SIOSCI"; + }; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x1e789000 0x1000>; + pinctrl_spi1_default: spi1_default { + function = "SPI1"; + groups = "SPI1"; + }; - lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2500-lpc-bmc"; - reg = <0x0 0x80>; - }; + pinctrl_spi1cs1_default: spi1cs1_default { + function = "SPI1CS1"; + groups = "SPI1CS1"; + }; - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; + pinctrl_spi1debug_default: spi1debug_default { + function = "SPI1DEBUG"; + groups = "SPI1DEBUG"; + }; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x80 0x1e0>; + pinctrl_spi1passthru_default: spi1passthru_default { + function = "SPI1PASSTHRU"; + groups = "SPI1PASSTHRU"; + }; - reg-io-width = <4>; + pinctrl_spi2ck_default: spi2ck_default { + function = "SPI2CK"; + groups = "SPI2CK"; + }; - lhc: lhc@20 { - compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24 0x48 0x8>; - }; - }; - }; + pinctrl_spi2cs0_default: spi2cs0_default { + function = "SPI2CS0"; + groups = "SPI2CS0"; + }; - uart2: serial@1e78d000 { - compatible = "ns16550a"; - reg = <0x1e78d000 0x1000>; - reg-shift = <2>; - interrupts = <32>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; + pinctrl_spi2cs1_default: spi2cs1_default { + function = "SPI2CS1"; + groups = "SPI2CS1"; + }; - uart3: serial@1e78e000 { - compatible = "ns16550a"; - reg = <0x1e78e000 0x1000>; - reg-shift = <2>; - interrupts = <33>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; + pinctrl_spi2miso_default: spi2miso_default { + function = "SPI2MISO"; + groups = "SPI2MISO"; + }; - uart4: serial@1e78f000 { - compatible = "ns16550a"; - reg = <0x1e78f000 0x1000>; - reg-shift = <2>; - interrupts = <34>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; + pinctrl_spi2mosi_default: spi2mosi_default { + function = "SPI2MOSI"; + groups = "SPI2MOSI"; + }; - uart5: serial@1e784000 { - compatible = "ns16550a"; - reg = <0x1e784000 0x1000>; - reg-shift = <2>; - interrupts = <10>; - clocks = <&clk_uart>; - current-speed = <38400>; - no-loopback-test; - status = "disabled"; - }; + pinctrl_timer3_default: timer3_default { + function = "TIMER3"; + groups = "TIMER3"; + }; - uart6: serial@1e787000 { - compatible = "ns16550a"; - reg = <0x1e787000 0x1000>; - reg-shift = <2>; - interrupts = <10>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; + pinctrl_timer4_default: timer4_default { + function = "TIMER4"; + groups = "TIMER4"; + }; - adc: adc@1e6e9000 { - compatible = "aspeed,ast2500-adc"; - reg = <0x1e6e9000 0xb0>; - clocks = <&clk_apb>; - #io-channel-cells = <1>; - status = "disabled"; - }; - }; + pinctrl_timer5_default: timer5_default { + function = "TIMER5"; + groups = "TIMER5"; + }; + + pinctrl_timer6_default: timer6_default { + function = "TIMER6"; + groups = "TIMER6"; + }; + + pinctrl_timer7_default: timer7_default { + function = "TIMER7"; + groups = "TIMER7"; + }; + + pinctrl_timer8_default: timer8_default { + function = "TIMER8"; + groups = "TIMER8"; + }; + + pinctrl_txd1_default: txd1_default { + function = "TXD1"; + groups = "TXD1"; + }; + + pinctrl_txd2_default: txd2_default { + function = "TXD2"; + groups = "TXD2"; + }; + + pinctrl_txd3_default: txd3_default { + function = "TXD3"; + groups = "TXD3"; + }; + + pinctrl_txd4_default: txd4_default { + function = "TXD4"; + groups = "TXD4"; + }; + + pinctrl_uart6_default: uart6_default { + function = "UART6"; + groups = "UART6"; + }; + + pinctrl_usbcki_default: usbcki_default { + function = "USBCKI"; + groups = "USBCKI"; + }; + + pinctrl_vgabiosrom_default: vgabiosrom_default { + function = "VGABIOSROM"; + groups = "VGABIOSROM"; + }; + + pinctrl_vgahs_default: vgahs_default { + function = "VGAHS"; + groups = "VGAHS"; + }; + + pinctrl_vgavs_default: vgavs_default { + function = "VGAVS"; + groups = "VGAVS"; + }; + + pinctrl_vpi24_default: vpi24_default { + function = "VPI24"; + groups = "VPI24"; + }; + + pinctrl_vpo_default: vpo_default { + function = "VPO"; + groups = "VPO"; + }; + + pinctrl_wdtrst1_default: wdtrst1_default { + function = "WDTRST1"; + groups = "WDTRST1"; + }; + + pinctrl_wdtrst2_default: wdtrst2_default { + function = "WDTRST2"; + groups = "WDTRST2"; }; }; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index 4da011a7a6986aac7ee3e6188b1038bbe25b2855..1c86537a42a01cce895086b4fea786f61eb9fe0c 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -147,12 +147,12 @@ }; }; - usb0: ohci@00600000 { + usb0: ohci@600000 { status = "okay"; num-ports = <3>; }; - usb1: ehci@00700000 { + usb1: ehci@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts index 21c5b56c92e083cb618b4e05d8a30733b89ee519..f877f3430bcc299b29d2b41ea7a4a40dc426b12f 100644 --- a/arch/arm/boot/dts/at91-ariettag25.dts +++ b/arch/arm/boot/dts/at91-ariettag25.dts @@ -59,12 +59,12 @@ }; }; - usb0: ohci@00600000 { + usb0: ohci@600000 { status = "okay"; num-ports = <3>; }; - usb1: ehci@00700000 { + usb1: ehci@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts index 27ebb0f722fdbd724fe83089b86cae39eed2b5ee..c452654b843a400a1c29292ec5d842c44da6cb79 100644 --- a/arch/arm/boot/dts/at91-cosino_mega2560.dts +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -62,7 +62,7 @@ }; }; - usb0: ohci@00600000 { + usb0: ohci@600000 { status = "okay"; num-ports = <3>; atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */ @@ -71,7 +71,7 @@ >; }; - usb1: ehci@00700000 { + usb1: ehci@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts index 4372c0287c1c053b3e505f130bbd2bc66d44615c..ec6c28c521a5b64210b02227a676b04686d1ff8f 100644 --- a/arch/arm/boot/dts/at91-kizbox2.dts +++ b/arch/arm/boot/dts/at91-kizbox2.dts @@ -133,11 +133,11 @@ }; }; - usb1: ohci@00600000 { + usb1: ohci@600000 { status = "okay"; }; - usb2: ehci@00700000 { + usb2: ehci@700000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts index 33238fcb6d0b420430cc6a584b71af98d141c3b1..fe1bc0a59a98b4775f1d6fe84c6f8bf3920f41d9 100644 --- a/arch/arm/boot/dts/at91-kizboxmini.dts +++ b/arch/arm/boot/dts/at91-kizboxmini.dts @@ -59,12 +59,12 @@ }; }; - usb0: ohci@00600000 { + usb0: ohci@600000 { num-ports = <1>; status = "okay"; }; - usb1: ehci@00700000 { + usb1: ehci@700000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 60cb084a8d927e40303a377a40fd283d2eb29f45..6d87b4eb6c417e3f7dbe0cdaf91fdbc30fbdc6ac 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -53,19 +53,27 @@ model = "Atmel SAMA5D27 SOM1 EK"; compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + aliases { + serial0 = &uart1; /* DBGU */ + serial1 = &uart4; /* mikro BUS 1 */ + serial2 = &uart2; /* mikro BUS 2 */ + i2c1 = &i2c1; + i2c2 = &i2c2; + }; + chosen { stdout-path = "serial0:115200n8"; }; ahb { - usb0: gadget@00300000 { + usb0: gadget@300000 { atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00400000 { + usb1: ohci@400000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */ &pioA PIN_PA27 GPIO_ACTIVE_HIGH @@ -76,7 +84,7 @@ status = "okay"; }; - usb2: ehci@00500000 { + usb2: ehci@500000 { status = "okay"; }; @@ -128,12 +136,14 @@ }; pwm0: pwm@f802c000 { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>; + status = "disabled"; /* Conflict with leds. */ }; flx1: flexcom@f8038000 { atmel,flexcom-mode = ; - status = "disabled"; + status = "okay"; i2c2: i2c@600 { compatible = "atmel,sama5d2-i2c"; @@ -147,7 +157,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_i2c>; atmel,fifo-size = <16>; - status = "disabled"; + status = "okay"; }; }; @@ -165,17 +175,12 @@ status = "okay"; }; - can0: can@f8054000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can0_default>; - }; - uart3: serial@fc008000 { atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_default>; - status = "disabled"; + status = "disabled"; /* Conflict with isc. */ }; uart4: serial@fc00c000 { @@ -199,7 +204,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; atmel,fifo-size = <32>; - status = "disabled"; + status = "disabled"; /* Conflict with isc. */ }; spi2: spi@400 { @@ -211,7 +216,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; atmel,fifo-size = <16>; - status = "disabled"; + status = "disabled"; /* Conflict with isc. */ }; }; @@ -228,7 +233,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; atmel,fifo-size = <32>; - status = "disabled"; + status = "disabled"; /* Conflict with spi3 and i2c3. */ }; spi3: spi@400 { @@ -240,7 +245,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>; atmel,fifo-size = <16>; - status = "okay"; + status = "okay"; /* Conflict with uart6 and i2c3. */ }; i2c3: i2c@600 { @@ -255,7 +260,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; atmel,fifo-size = <16>; - status = "disabled"; + status = "disabled"; /* Conflict with uart6 and spi3. */ }; }; @@ -268,12 +273,6 @@ pinctrl@fc038000 { - pinctrl_can0_default: can0_default { - pinmux = , - ; - bias-disable; - }; - pinctrl_can1_default: can1_default { pinmux = , ; @@ -350,7 +349,7 @@ , , ; - bias-pull-up; + bias-disable; }; ck_cd_vddsel { @@ -368,7 +367,7 @@ , , ; - bias-pull-up; + bias-disable; }; conf-ck_cd { @@ -512,6 +511,7 @@ label = "USER"; gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; linux,code = <0x104>; + wakeup-source; }; }; @@ -519,7 +519,7 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led_gpio_default>; - status = "okay"; + status = "okay"; /* Conflict with pwm0. */ red { label = "red"; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index cbc26001247bea2fabcf186ad784f187810dbc63..56de21de2779ea8e0af901458f46b46ffd77c6e5 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -67,14 +67,14 @@ }; ahb { - usb0: gadget@00300000 { + usb0: gadget@300000 { atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00400000 { + usb1: ohci@400000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */ &pioA PIN_PB10 GPIO_ACTIVE_HIGH @@ -85,7 +85,7 @@ status = "okay"; }; - usb2: ehci@00500000 { + usb2: ehci@500000 { status = "okay"; }; @@ -103,6 +103,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc1_default>; status = "okay"; /* conflict with qspi0 */ + vqmmc-supply = <&vdd_3v3_reg>; + vmmc-supply = <&vdd_3v3_reg>; }; apb { @@ -160,14 +162,6 @@ compatible = "active-semi,act8945a"; reg = <0x5b>; active-semi,vsel-high; - active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>; - active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>; - active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>; - active-semi,input-voltage-threshold-microvolt = <6600>; - active-semi,precondition-timeout = <40>; - active-semi,total-timeout = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; status = "okay"; regulators { @@ -220,11 +214,28 @@ regulator-always-on; }; }; + + charger { + compatible = "active-semi,act8945a-charger"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; + interrupt-parent = <&pioA>; + interrupts = ; + + active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>; + active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>; + active-semi,input-voltage-threshold-microvolt = <6600>; + active-semi,precondition-timeout = <40>; + active-semi,total-timeout = <3>; + status = "okay"; + }; }; }; pwm0: pwm@f802c000 { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm2_default>; + status = "disabled"; /* conflict with leds */ }; flx0: flexcom@f8034000 { @@ -449,7 +460,7 @@ , , ; - bias-pull-up; + bias-disable; }; ck_cd_rstn_vddsel { @@ -468,7 +479,7 @@ , , ; - bias-pull-up; + bias-disable; }; conf-ck_cd { @@ -508,6 +519,11 @@ bias-disable; }; + pinctrl_pwm0_pwm2_default: pwm0_pwm2_default { + pinmux = , + ; + bias-pull-up; + }; }; classd: classd@fc048000 { @@ -536,6 +552,7 @@ label = "PB_USER"; gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>; linux,code = <0x104>; + wakeup-source; }; }; @@ -543,7 +560,7 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led_gpio_default>; - status = "okay"; + status = "okay"; /* conflict with pwm0 */ red { label = "red"; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 3af088d2cba79d29ddfd7984644fe6822ce48906..40879aded68080112eb9848367a31de16e000a85 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -235,14 +235,14 @@ }; }; - usb0: gadget@00500000 { + usb0: gadget@500000 { atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00600000 { + usb1: ohci@600000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 3 GPIO_ACTIVE_LOW @@ -251,7 +251,7 @@ status = "okay"; }; - usb2: ehci@00700000 { + usb2: ehci@700000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts index 84be29f38dae005f12eb0c13a1ec90eaf5b5616a..fe05aaa7ac8785cebd149a33116f1ebcd0b36caf 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts @@ -21,14 +21,14 @@ }; ahb { - usb0: gadget@00400000 { + usb0: gadget@400000 { atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00500000 { + usb1: ohci@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_LOW @@ -37,7 +37,7 @@ status = "okay"; }; - usb2: ehci@00600000 { + usb2: ehci@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index cf712444b2c2cb37d1b77ef18bf485cca499a727..29ab17a97f9ada1b50242b7921cf40f82ede95bc 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -170,14 +170,14 @@ }; }; - usb0: gadget@00400000 { + usb0: gadget@400000 { atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00500000 { + usb1: ohci@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_HIGH @@ -186,7 +186,7 @@ status = "okay"; }; - usb2: ehci@00600000 { + usb2: ehci@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index bae5248f126e8f23ed59cdc0df10586b85814dc3..5b7ee92e32a71af7758800f7543f8f787b01dc33 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -216,14 +216,14 @@ }; }; - usb0: gadget@00400000 { + usb0: gadget@400000 { atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00500000 { + usb1: ohci@500000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */ &pioE 11 GPIO_ACTIVE_LOW @@ -232,7 +232,7 @@ status = "okay"; }; - usb2: ehci@00600000 { + usb2: ehci@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index e0c0b2897a49d4e19d8d6cd43e39f89592a6515c..9f6005708ea880092c308fc197e7028b7d7e9011 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -180,14 +180,14 @@ }; }; - usb0: gadget@00400000 { + usb0: gadget@400000 { atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "disable"; }; - usb1: ohci@00500000 { + usb1: ohci@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_LOW @@ -196,7 +196,7 @@ status = "disable"; }; - usb2: ehci@00600000 { + usb2: ehci@600000 { /* 4G Modem */ status = "okay"; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index f057e0b15a6f5427d5018ea7d0b18555feede78c..da622bf45b4a3a17a07216cc8a28126c0e13dae4 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -66,7 +66,7 @@ }; }; - sram: sram@00200000 { + sram: sram@200000 { compatible = "mmio-sram"; reg = <0x00200000 0x4000>; }; @@ -938,7 +938,7 @@ status = "disabled"; }; - usb0: ohci@00300000 { + usb0: ohci@300000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index f90e1c2d3caa2fc41485ba330bdcd691a379e6be..33192d0cefeeec67fd9785f1e141643f970ec8e7 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -78,7 +78,7 @@ }; }; - usb0: ohci@00300000 { + usb0: ohci@300000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 6582f3cca92920cd9aa0918655f0015c49dfed1a..bc655e7332d6542720f209aa160c390e7fc456a5 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -69,7 +69,7 @@ }; }; - sram0: sram@002ff000 { + sram0: sram@2ff000 { compatible = "mmio-sram"; reg = <0x002ff000 0x2000>; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index a05353f961515fdcf3f5aa4ccaabba743d914dab..66876019101da789dc139420ebe4a80ec1541a18 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -60,7 +60,7 @@ }; }; - sram: sram@00300000 { + sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x28000>; }; @@ -71,7 +71,7 @@ #size-cells = <1>; ranges; - usb0: ohci@00500000 { + usb0: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 157e1493e6eb58e373e699dbc5bd6619b0d05009..960d6940ebf656818e5a2cd4c32757d8f62e99e4 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -32,7 +32,7 @@ }; ahb { - usb0: ohci@00500000 { + usb0: ohci@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index ed4b564f8de5756ef700c04db31d02b240e62238..e54f14d36b6f4c2516561ef83a0aecd224973645 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -62,12 +62,12 @@ }; }; - sram0: sram@00300000 { + sram0: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x14000>; }; - sram1: sram@00500000 { + sram1: sram@500000 { compatible = "mmio-sram"; reg = <0x00500000 0x4000>; }; @@ -1010,7 +1010,7 @@ status = "disabled"; }; - usb0: ohci@00a00000 { + usb0: ohci@a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 10a0925da10e16db6b5668f09ae62f52f6f593d2..5a2e1af793f55aab9f4ddbe0c6843529af596762 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -191,7 +191,7 @@ }; }; - usb0: ohci@00a00000 { + usb0: ohci@a00000 { num-ports = <2>; status = "okay"; atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index f5930161816371128530533b70ff298fa64cfb0a..90705ee6008b20418826ae1a9c752525e8b3b4f4 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -16,11 +16,11 @@ reg = <0x20000000 0x08000000>; }; - sram0: sram@002ff000 { + sram0: sram@2ff000 { status = "disabled"; }; - sram1: sram@002fc000 { + sram1: sram@2fc000 { compatible = "mmio-sram"; reg = <0x002fc000 0x8000>; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 64fa3f9a39d3353ea18eb806a62b2498045a4d81..2b127ca7aaa0a3f2feef3d962ebb634d6051d1b5 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -74,7 +74,7 @@ }; }; - sram: sram@00300000 { + sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x10000>; }; @@ -1313,7 +1313,7 @@ status = "disabled"; }; - usb0: ohci@00700000 { + usb0: ohci@700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1322,7 +1322,7 @@ status = "disabled"; }; - usb1: ehci@00800000 { + usb1: ehci@800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 94c52c555f832d69cab669b64204f614fd00bced..e922552a04cb45b5841a4a9e9bf01f92fd8020d0 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -290,14 +290,14 @@ }; }; - usb0: ohci@00700000 { + usb0: ohci@700000 { status = "okay"; num-ports = <2>; atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW &pioD 3 GPIO_ACTIVE_LOW>; }; - usb1: ehci@00800000 { + usb1: ehci@800000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 06516d02d351b50e5f4474930b15a3df2111a146..e0ac824e0785bbdfca5ade320cf6cd2607c41c72 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -64,7 +64,7 @@ }; }; - sram: sram@00300000 { + sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x8000>; }; @@ -1018,7 +1018,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 5bea8c59b1154313d0fdf72f8244314ae4dea733..212562aedf5ebb53ebec31c7dd3d63b7cb5f5392 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -169,7 +169,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <1>; atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 7768342a663857e91dc90be762bffcf262ba23f4..52f0e9ef8f67e5e83a5f1e4e9ce71e4943cdb5ee 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -70,7 +70,7 @@ }; }; - sram: sram@00300000 { + sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x10000>; }; @@ -81,7 +81,7 @@ #size-cells = <1>; ranges; - fb0: fb@00500000 { + fb0: fb@500000 { compatible = "atmel,at91sam9rl-lcdc"; reg = <0x00500000 0x1000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 9047c168298a7423ae09de0cb1c03b768e7a22d6..ea6ed98960c911bc9b47c170c7d07e77718d8c81 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -32,7 +32,7 @@ }; ahb { - fb0: fb@00500000 { + fb0: fb@500000 { display = <&display0>; status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 494864836e837aa87de0b7d7f8fe46844cd788e7..f705a3165656de0b8058a56d7bad1bb02de19d83 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -16,6 +16,10 @@ ahb { apb { + can1: can@f8004000 { + status = "okay"; + }; + macb0: ethernet@f802c000 { phy-mode = "rmii"; status = "okay"; @@ -25,6 +29,12 @@ phy-mode = "rmii"; status = "okay"; }; + + pwm0: pwm@f8034000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm0_1>; + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 57f307541d2ea4f5e892b776648f5793aacbd6ec..ad779a7dfefd62aa1971698301618141f8cd37d8 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -72,7 +72,7 @@ }; }; - sram: sram@00300000 { + sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x8000>; }; @@ -1231,7 +1231,7 @@ }; }; - usb0: ohci@00600000 { + usb0: ohci@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1240,7 +1240,7 @@ status = "disabled"; }; - usb1: ehci@00700000 { + usb1: ehci@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 9d2bbc41a7b0812d2460da3688090a58bd1f1b9d..4a2e13c8bf00470442e95ad864945ad6ac0afff9 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -50,6 +50,8 @@ }; usart0: serial@f801c000 { + atmel,use-dma-rx; + atmel,use-dma-tx; status = "okay"; }; @@ -134,7 +136,7 @@ }; }; - usb0: ohci@00600000 { + usb0: ohci@600000 { status = "okay"; num-ports = <3>; atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */ @@ -143,7 +145,7 @@ >; }; - usb1: ehci@00700000 { + usb1: ehci@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi index 0278f63b2daf8796379998675797cf1b172da5cd..1304452f0fae0eb8887591357263c1a61a3f6979 100644 --- a/arch/arm/boot/dts/at91sam9xe.dtsi +++ b/arch/arm/boot/dts/at91sam9xe.dtsi @@ -49,11 +49,11 @@ model = "Atmel AT91SAM9XE family SoC"; compatible = "atmel,at91sam9xe", "atmel,at91sam9260"; - sram0: sram@002ff000 { + sram0: sram@2ff000 { status = "disabled"; }; - sram1: sram@00300000 { + sram1: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x4000>; }; diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 3c8fa26e87b70c71d0bdb3e10d8b9f3219c1f130..897103e0a79bf3b4be99d8b8f2a8a48bb0b22672 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -107,7 +107,7 @@ }; }; - usb_power_supply: usb_power_supply { + usb_power_supply: usb-power-supply { compatible = "x-powers,axp202-usb-power-supply"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..73b761f850c54ca3e5acb02b2414659550f54c93 --- /dev/null +++ b/arch/arm/boot/dts/axp81x.dtsi @@ -0,0 +1,139 @@ +/* + * Copyright 2017 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* AXP813/818 Integrated Power Management Chip */ + +&axp81x { + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <3000>; + + reg_dcdc1: dcdc1 { + }; + + reg_dcdc2: dcdc2 { + }; + + reg_dcdc3: dcdc3 { + }; + + reg_dcdc4: dcdc4 { + }; + + reg_dcdc5: dcdc5 { + }; + + reg_dcdc6: dcdc6 { + }; + + reg_dcdc7: dcdc7 { + }; + + reg_aldo1: aldo1 { + }; + + reg_aldo2: aldo2 { + }; + + reg_aldo3: aldo3 { + }; + + reg_dldo1: dldo1 { + }; + + reg_dldo2: dldo2 { + }; + + reg_dldo3: dldo3 { + }; + + reg_dldo4: dldo4 { + }; + + reg_eldo1: eldo1 { + }; + + reg_eldo2: eldo2 { + }; + + reg_eldo3: eldo3 { + }; + + reg_fldo1: fldo1 { + }; + + reg_fldo2: fldo2 { + }; + + reg_fldo3: fldo3 { + }; + + reg_ldo_io0: ldo-io0 { + /* Disable by default to avoid conflicts with GPIO */ + status = "disabled"; + }; + + reg_ldo_io1: ldo-io1 { + /* Disable by default to avoid conflicts with GPIO */ + status = "disabled"; + }; + + reg_rtc_ldo: rtc-ldo { + /* RTC_LDO is a fixed, always-on regulator */ + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_sw: sw { + }; + + reg_drivevbus: drivevbus { + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 7c957ea06c66ce6b603277e452584dc8df05e5ef..699fdf94d139bdffea5b28fbc4bab912895583f2 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -96,14 +96,14 @@ #address-cells = <1>; #size-cells = <1>; - otp: otp@0301c800 { + otp: otp@301c800 { compatible = "brcm,ocotp"; reg = <0x0301c800 0x2c>; brcm,ocotp-size = <2048>; status = "disabled"; }; - pcie_phy: phy@0301d0a0 { + pcie_phy: phy@301d0a0 { compatible = "brcm,cygnus-pcie-phy"; reg = <0x0301d0a0 0x14>; #address-cells = <1>; @@ -120,7 +120,7 @@ }; }; - pinctrl: pinctrl@0301d0c8 { + pinctrl: pinctrl@301d0c8 { compatible = "brcm,cygnus-pinmux"; reg = <0x0301d0c8 0x30>, <0x0301d24c 0x2c>; @@ -141,7 +141,7 @@ }; }; - mailbox: mailbox@03024024 { + mailbox: mailbox@3024024 { compatible = "brcm,iproc-mailbox"; reg = <0x03024024 0x40>; interrupts = ; @@ -150,7 +150,7 @@ #mbox-cells = <1>; }; - gpio_crmu: gpio@03024800 { + gpio_crmu: gpio@3024800 { compatible = "brcm,cygnus-crmu-gpio"; reg = <0x03024800 0x50>, <0x03024008 0x18>; @@ -473,6 +473,16 @@ status = "disabled"; }; + clcd: clcd@180a0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x180a0000 0x1000>; + interrupts = ; + interrupt-names = "combined"; + clocks = <&axi41_clk>, <&apb_clk>; + clock-names = "clcdclk", "apb_pclk"; + status = "disabled"; + }; + v3d: v3d@180a2000 { compatible = "brcm,cygnus-v3d"; reg = <0x180a2000 0x1000>; @@ -575,6 +585,14 @@ status = "disabled"; }; + pwm: pwm@180aa500 { + compatible = "brcm,kona-pwm"; + reg = <0x180aa500 0xc4>; + #pwm-cells = <3>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>; + status = "disabled"; + }; + keypad: keypad@180ac000 { compatible = "brcm,bcm-keypad"; reg = <0x180ac000 0x14c>; diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..3f9cedd8011f0c22fb05b6a50d1705fc5ceab05d --- /dev/null +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -0,0 +1,368 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include + +/ { + compatible = "brcm,hr2"; + model = "Broadcom Hurricane 2 SoC"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = ; + interrupt-affinity = <&cpu0>; + }; + + mpcore@19000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x19000000 0x00023000>; + #address-cells = <1>; + #size-cells = <1>; + + a9pll: arm_clk@0 { + #clock-cells = <0>; + compatible = "brcm,hr2-armpll"; + clocks = <&osc>; + reg = <0x0 0x1000>; + }; + + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; + interrupts = ; + clocks = <&periph_clk>; + }; + + twd-timer@20600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x20600 0x20>; + interrupts = ; + clocks = <&periph_clk>; + }; + + twd-watchdog@20620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x20620 0x20>; + interrupts = ; + clocks = <&periph_clk>; + }; + + gic: interrupt-controller@21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x21000 0x1000>, + <0x20100 0x100>; + }; + + L2: l2-cache@22000 { + compatible = "arm,pl310-cache"; + reg = <0x22000 0x1000>; + cache-unified; + cache-level = <2>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + periph_clk: periph_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&a9pll>; + clock-div = <2>; + clock-mult = <1>; + }; + }; + + axi@18000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x18000000 0x0011c40c>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@300 { + compatible = "ns16550a"; + reg = <0x0300 0x100>; + interrupts = ; + clocks = <&osc>; + status = "disabled"; + }; + + uart1: serial@400 { + compatible = "ns16550a"; + reg = <0x0400 0x100>; + interrupts = ; + clocks = <&osc>; + status = "disabled"; + }; + + dma@20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20000 0x1000>; + interrupts = , + , + , + , + , + , + , + , + ; + #dma-cells = <1>; + status = "disabled"; + }; + + amac0: ethernet@22000 { + compatible = "brcm,nsp-amac"; + reg = <0x22000 0x1000>, + <0x110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = ; + status = "disabled"; + }; + + nand: nand@26000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; + reg = <0x26000 0x600>, + <0x11b408 0x600>, + <0x026f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = ; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; + + gpiob: gpio@30000 { + compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio"; + reg = <0x30000 0x50>; + #gpio-cells = <2>; + gpio-controller; + ngpios = <4>; + interrupt-controller; + interrupts = ; + }; + + pwm: pwm@31000 { + compatible = "brcm,iproc-pwm"; + reg = <0x31000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + + rng: rng@33000 { + compatible = "brcm,bcm-nsp-rng"; + reg = <0x33000 0x14>; + }; + + qspi: qspi@27200 { + compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + reg = <0x027200 0x184>, + <0x027000 0x124>, + <0x11c408 0x004>, + <0x0273a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", + "intr_status_reg"; + interrupts = , + , + , + , + , + , + ; + interrupt-names = "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done", + "spi_lr_overhead", + "mspi_done", + "mspi_halted"; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + + /* partitions defined in board DTS */ + }; + + ccbtimer0: timer@34000 { + compatible = "arm,sp804"; + reg = <0x34000 0x1000>; + interrupts = , + ; + }; + + ccbtimer1: timer@35000 { + compatible = "arm,sp804"; + reg = <0x35000 0x1000>; + interrupts = , + ; + }; + + i2c0: i2c@38000 { + compatible = "brcm,iproc-i2c"; + reg = <0x38000 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <100000>; + }; + + watchdog@39000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x39000 0x1000>; + interrupts = ; + }; + + i2c1: i2c@3b000 { + compatible = "brcm,iproc-i2c"; + reg = <0x3b000 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <100000>; + }; + }; + + pflash: nor@20000000 { + compatible = "cfi-flash", "jedec-flash"; + reg = <0x20000000 0x04000000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + + /* partitions defined in board DTS */ + }; + + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; + + status = "disabled"; + + msi-parent = <&msi0>; + msi0: msi-controller { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + brcm,pcie-msi-inten; + }; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; + + status = "disabled"; + + msi-parent = <&msi1>; + msi1: msi-controller { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + brcm,pcie-msi-inten; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index dff66974feeda575c06f38c38ddff3e4ecdf41ce..dcc55aa84583cdd18f7ef6ecd780eb947be1ef1f 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -75,7 +75,7 @@ #address-cells = <1>; #size-cells = <1>; - a9pll: arm_clk@00000 { + a9pll: arm_clk@0 { #clock-cells = <0>; compatible = "brcm,nsp-armpll"; clocks = <&osc>; @@ -85,7 +85,7 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = ; + interrupts = ; clocks = <&periph_clk>; }; @@ -93,7 +93,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x20600 0x20>; interrupts = ; + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; @@ -164,7 +164,7 @@ #address-cells = <1>; #size-cells = <1>; - gpioa: gpio@0020 { + gpioa: gpio@20 { compatible = "brcm,nsp-gpio-a"; reg = <0x0020 0x70>, <0x3f1c4 0x1c>; @@ -176,7 +176,7 @@ gpio-ranges = <&pinctrl 0 0 32>; }; - uart0: serial@0300 { + uart0: serial@300 { compatible = "ns16550a"; reg = <0x0300 0x100>; interrupts = ; @@ -184,7 +184,7 @@ status = "disabled"; }; - uart1: serial@0400 { + uart1: serial@400 { compatible = "ns16550a"; reg = <0x0400 0x100>; interrupts = ; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index eb1a28da57e3122c0f650af5a3e26f34f12e0ab4..a8844d033b3fed7d20855d20ba4f403f81d02fc9 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -30,6 +30,11 @@ pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + }; }; /* uart1 is mapped to the pin header */ diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 013431e3d7c3140d3a0645bdf4f130e9a860f984..dcde93c85c2d38e0f230ca21c700cb7755d9ec55 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -639,5 +639,6 @@ usbphy: phy { compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index c544ab302012078633e2940aab2e1e922c910166..ba1c19b1b3eb60962d951a3449d3e6560bac092a 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -57,7 +57,8 @@ usb { label = "bcm53xx:green:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; }; status { diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts new file mode 100644 index 0000000000000000000000000000000000000000..ecd22a2467465c0a8db19a8847e9518d22316f1a --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul ABR-4500 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts new file mode 100644 index 0000000000000000000000000000000000000000..15ffb1abc4409183677a92fcc0a1e096d43e2ee2 --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XBR-4500 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts new file mode 100644 index 0000000000000000000000000000000000000000..74c83b0ca54e0c1937fe446ae487c0b4a6661ead --- /dev/null +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts @@ -0,0 +1,50 @@ +/* + * Copyright 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm53573.dtsi" + +/ { + compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573"; + model = "Luxul XAP-1440 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + wlan { + label = "bcm53xx:blue:wlan"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + system { + label = "bcm53xx:green:system"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts new file mode 100644 index 0000000000000000000000000000000000000000..214df18f3a754c5c088126df547854d88c479952 --- /dev/null +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts @@ -0,0 +1,87 @@ +/* + * Copyright 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm53573.dtsi" + +/ { + compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573"; + model = "Luxul XAP-810 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + system { + label = "bcm53xx:green:system"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + }; + + pcie0_leds { + compatible = "gpio-leds"; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pcie0 { + ranges = <0x00000000 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,1,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + pcie0_chipcommon: chipcommon@0 { + reg = <0 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 045b9bb857f9a030491bc3bdbf82ae67bb841b73..9a076c409f4ed35fcf5fbe79807ede6e7e8466d5 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -24,7 +24,7 @@ #address-cells = <1>; #size-cells = <1>; - uart0: serial@0300 { + uart0: serial@300 { compatible = "ns16550"; reg = <0x0300 0x100>; interrupts = ; @@ -32,7 +32,7 @@ status = "disabled"; }; - uart1: serial@0400 { + uart1: serial@400 { compatible = "ns16550"; reg = <0x0400 0x100>; interrupts = ; @@ -47,7 +47,7 @@ #address-cells = <1>; #size-cells = <1>; - a9pll: arm_clk@00000 { + a9pll: arm_clk@0 { #clock-cells = <0>; compatible = "brcm,nsp-armpll"; clocks = <&osc>; diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts new file mode 100644 index 0000000000000000000000000000000000000000..431cda514230cf026cdc28063df385de645a0203 --- /dev/null +++ b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts @@ -0,0 +1,85 @@ +/* + * DTS for Unifi Switch 8 port + * + * Copyright (C) 2017 Florian Fainelli + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm-hr2.dtsi" + +/ { + compatible = "ubnt,unifi-switch8", "brcm,bcm53342", "brcm,hr2"; + model = "Ubiquiti UniFi Switch 8 (BCM53342)"; + + /* Hurricane 2 designs use the second UART */ + chosen { + bootargs = "console=ttyS1,115200 earlyprintk"; + }; + + memory@0 { + reg = <0x00000000 0x08000000>, + <0x68000000 0x08000000>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&qspi { + status = "okay"; + bspi-sel = <0>; + + flash: m25p80@0 { + compatible = "m25p80"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <12500000>; + spi-cpol; + spi-cpha; + + partition@0 { + label = "u-boot"; + reg = <0x0 0xc0000>; + }; + + partition@c0000 { + label = "u-boot-env"; + reg = <0xc0000 0x10000>; + }; + + partition@d0000 { + label = "shmoo"; + reg = <0xd0000 0x10000>; + }; + + partition@e0000 { + label = "kernel0"; + reg = <0xe0000 0xf00000>; + }; + + partition@fe0000 { + label = "kernel1"; + reg = <0xfe0000 0xf10000>; + }; + + partition@1ef0000 { + label = "cfg"; + reg = <0x1ef0000 0x100000>; + }; + + partition@1ff0000 { + label = "EEPROM"; + reg = <0x1ff0000 0x10000>; + }; + }; +}; + +&pcie0 { + /* Attaches to the internal switch */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index c698a565b8ae9e2134c36fc796e983159b686a67..16007d72c346ab76d48c4c73d356a353af0e4133 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -107,7 +107,7 @@ gpio-controller; #gpio-cells = <2>; - uart0: serial@0300 { + uart0: serial@300 { compatible = "ns16550a"; reg = <0x0300 0x100>; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index 3bc50849d013ff0442f559dce24274972202f5f2..b8bde13de90a571ea71aeec0515c7c8290ecb7ca 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -141,10 +141,6 @@ status = "okay"; }; -&sata { - status = "okay"; -}; - &qspi { bspi-sel = <0>; flash: m25p80@0 { diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index d94d14b3c745a0d01c031b6d9b9e6426e0e7b2ec..6a44b8021702176c63d09e55925ffd3d7e02994e 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -177,10 +177,6 @@ status = "okay"; }; -&sata { - status = "okay"; -}; - &srab { compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; status = "okay"; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 425c48971abecf267f146c8671a4843e204fcd07..d575823c57507b003ec938a848a28562d717a4be 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -202,7 +202,7 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; - gpio0: gpio@0400 { + gpio0: gpio@400 { compatible = "snps,dw-apb-gpio"; reg = <0x0400 0x400>; #address-cells = <1>; @@ -220,7 +220,7 @@ }; }; - gpio1: gpio@0800 { + gpio1: gpio@800 { compatible = "snps,dw-apb-gpio"; reg = <0x0800 0x400>; #address-cells = <1>; @@ -238,7 +238,7 @@ }; }; - gpio2: gpio@0c00 { + gpio2: gpio@c00 { compatible = "snps,dw-apb-gpio"; reg = <0x0c00 0x400>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 4fe1574d08c3ab9b36c938074f772215e9c99416..501c59d97eae4b8360563c38d82abf4120b7a9dd 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -182,7 +182,7 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; - gpio0: gpio@0400 { + gpio0: gpio@400 { compatible = "snps,dw-apb-gpio"; reg = <0x0400 0x400>; #address-cells = <1>; @@ -200,7 +200,7 @@ }; }; - gpio1: gpio@0800 { + gpio1: gpio@800 { compatible = "snps,dw-apb-gpio"; reg = <0x0800 0x400>; #address-cells = <1>; @@ -218,7 +218,7 @@ }; }; - gpio2: gpio@0c00 { + gpio2: gpio@c00 { compatible = "snps,dw-apb-gpio"; reg = <0x0c00 0x400>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index e548229697fc5cecf29da93dc322184e2e67e4c0..bf3a6c9a1d347b6244a7910f0b2159c61348c308 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -234,7 +234,7 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; - gpio0: gpio@0400 { + gpio0: gpio@400 { compatible = "snps,dw-apb-gpio"; reg = <0x0400 0x400>; #address-cells = <1>; @@ -252,7 +252,7 @@ }; }; - gpio1: gpio@0800 { + gpio1: gpio@800 { compatible = "snps,dw-apb-gpio"; reg = <0x0800 0x400>; #address-cells = <1>; @@ -270,7 +270,7 @@ }; }; - gpio2: gpio@0c00 { + gpio2: gpio@c00 { compatible = "snps,dw-apb-gpio"; reg = <0x0c00 0x400>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index a0f0916156e66d83949716c4b571184695fbef3b..eed89e659143a878c9a62159c52c834340c3a61b 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -26,6 +26,19 @@ reg = <0xc0000000 0x08000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dsp_memory_region: dsp-memory@c3000000 { + compatible = "shared-dma-pool"; + reg = <0xc3000000 0x1000000>; + reusable; + status = "okay"; + }; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "DA850/OMAP-L138 LCDK"; @@ -319,3 +332,8 @@ pinctrl-0 = <&vpif_capture_pins>; status = "okay"; }; + +&dsp { + memory-region = <&dsp_memory_region>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index af68ef7b0caadee75e8d8fc9bffee1153ed355b9..c66cf78953639db3ed025e4997beb6ef77719064 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -23,6 +23,18 @@ reg = <0xfffee000 0x2000>; }; }; + dsp: dsp@11800000 { + compatible = "ti,da850-dsp"; + reg = <0x11800000 0x40000>, + <0x11e00000 0x8000>, + <0x11f00000 0x8000>, + <0x01c14044 0x4>, + <0x01c14174 0x8>; + reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig"; + interrupt-parent = <&intc>; + interrupts = <28>; + status = "disabled"; + }; soc@1c00000 { compatible = "simple-bus"; model = "da850"; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 9708157f5daf6f7c84a76e521aae8d27e5684d68..681f5487406e39f7bdad2c793754149c0ab189d3 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -75,6 +75,7 @@ reg = <0x47401300 0x100>; reg-names = "phy"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; usb0: usb@47401000 { @@ -385,6 +386,7 @@ reg = <0x1b00 0x100>; reg-names = "phy"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index f4a07bb7c3a29ec69b63edba91b2d9f4c948e21f..4a0a5115b298436dc76180bc74f1d1372d3163a5 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -457,25 +457,25 @@ }; }; - thermal: thermal-diode@001c { + thermal: thermal-diode@1c { compatible = "marvell,dove-thermal"; reg = <0x001c 0x0c>, <0x005c 0x08>; }; - gate_clk: clock-gating-ctrl@0038 { + gate_clk: clock-gating-ctrl@38 { compatible = "marvell,dove-gating-clock"; reg = <0x0038 0x4>; clocks = <&core_clk 0>; #clock-cells = <1>; }; - divider_clk: core-clock@0064 { + divider_clk: core-clock@64 { compatible = "marvell,dove-divider-clock"; reg = <0x0064 0x8>; #clock-cells = <1>; }; - pinctrl: pin-ctrl@0200 { + pinctrl: pin-ctrl@200 { compatible = "marvell,dove-pinctrl"; reg = <0x0200 0x14>, <0x0440 0x04>; @@ -719,13 +719,13 @@ }; }; - core_clk: core-clocks@0214 { + core_clk: core-clocks@214 { compatible = "marvell,dove-core-clock"; reg = <0x0214 0x4>; #clock-cells = <1>; }; - gpio0: gpio-ctrl@0400 { + gpio0: gpio-ctrl@400 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; gpio-controller; @@ -737,7 +737,7 @@ interrupts = <12>, <13>, <14>, <60>; }; - gpio1: gpio-ctrl@0420 { + gpio1: gpio-ctrl@420 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; gpio-controller; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 343e95f9a00144203b30e4e0beceee5e8bbbbbc7..e088bb93636a6b648f04ffc3836d63ada9e4c97c 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -256,3 +256,7 @@ status = "okay"; }; }; + +&pcie1_rc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index aa426dabb6c349d9f1b5a4a0173ae30ad3b7cc58..ef9c90daa74b82dd0de2abb885a09fc8396e65fa 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -497,7 +497,3 @@ pinctrl-1 = <&dcan1_pins_sleep>; pinctrl-2 = <&dcan1_pins_default>; }; - -&pcie1_rc { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 02a136a4661aa1ed172e4926a7a8dabad9e271b9..ac9216293b7c74283351f67c05f76bb59dbd52e0 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -170,7 +170,7 @@ pbias_mmc_reg: pbias_mmc_omap5 { regulator-name = "pbias_mmc_omap5"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; }; }; @@ -457,6 +457,7 @@ #dma-cells = <1>; dma-channels = <32>; dma-requests = <127>; + ti,hwmods = "dma_system"; }; edma: edma@43300000 { @@ -1069,6 +1070,13 @@ max-frequency = <192000000>; }; + hdqw1w: 1w@480b2000 { + compatible = "ti,omap3-1w"; + reg = <0x480b2000 0x1000>; + interrupts = ; + ti,hwmods = "hdq1w"; + }; + mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; reg = <0x480b4000 0x400>; @@ -1489,6 +1497,32 @@ }; }; + target-module@4a0dd000 { + compatible = "ti,sysc-omap4-sr"; + ti,hwmods = "smartreflex_core"; + reg = <0x4a0dd000 0x4>, + <0x4a0dd008 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a0dd000 0x001000>; + + /* SmartReflex child device marked reserved in TRM */ + }; + + target-module@4a0d9000 { + compatible = "ti,sysc-omap4-sr"; + ti,hwmods = "smartreflex_mpu"; + reg = <0x4a0d9000 0x4>, + <0x4a0d9008 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a0d9000 0x001000>; + + /* SmartReflex child device marked reserved in TRM */ + }; + omap_dwc3_1: omap_dwc3_1@48880000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss1"; diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts index 9a134ed271eb7e8d796925ae20f61b912927481d..bc9d5b69745298bab449c3a829edd25332dcd607 100644 --- a/arch/arm/boot/dts/ep7211-edb7211.dts +++ b/arch/arm/boot/dts/ep7211-edb7211.dts @@ -75,7 +75,7 @@ }; &bus { - flash: nor@00000000 { + flash: nor@0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <2>; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 639c2e605f3c99a4c5478b85c4ac69c236f8bfba..152e0291d0da0a53ba3fe362ed352ed86ab195e6 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -29,7 +29,7 @@ reg = <0x40000000 0x1ff00000>; }; - firmware@0205f000 { + firmware@205f000 { compatible = "samsung,secure-firmware"; reg = <0x0205f000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index bbdfcbc6e7d29a5cdbb854ba030f1d77cae048ad..029eb18590cf7a700e96bbad68f405aa0616987d 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -32,7 +32,7 @@ reg = <0x40000000 0x1ff00000>; }; - firmware@0205F000 { + firmware@205f000 { compatible = "samsung,secure-firmware"; reg = <0x0205F000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 0b45467d77a8f53d5b21ce910cadfd2d1226565e..3743df4de390f3f8c2de1185b858d3ebf18bb977 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -32,7 +32,7 @@ reg = <0x40000000 0x1ff00000>; }; - firmware@0205F000 { + firmware@205f000 { compatible = "samsung,secure-firmware"; reg = <0x0205F000 0x1000>; }; @@ -227,28 +227,6 @@ vci-supply = <&ldo20_reg>; reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; - power-on-delay= <30>; - power-off-delay= <120>; - reset-delay = <5>; - init-delay = <100>; - flip-horizontal; - flip-vertical; - panel-width-mm = <29>; - panel-height-mm = <29>; - - display-timings { - timing-0 { - clock-frequency = <4600000>; - hactive = <320>; - vactive = <320>; - hfront-porch = <1>; - hback-porch = <1>; - hsync-len = <1>; - vfront-porch = <150>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 590ee442d0ae1bde4ebe2e067f968cf54c2348d5..2bd3872221a1f627bce8f3b7a1bcba4a9b9962f1 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -122,7 +122,7 @@ }; }; - sysram@02020000 { + sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x40000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 5739389f5bb877ef7b29455a1bcd47328d7223ed..4768b086ed677caae2fae52e960774894e016811 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -55,7 +55,7 @@ serial3 = &serial_3; }; - clock_audss: clock-controller@03810000 { + clock_audss: clock-controller@3810000 { compatible = "samsung,exynos4210-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; @@ -64,7 +64,7 @@ clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; - i2s0: i2s@03830000 { + i2s0: i2s@3830000 { compatible = "samsung,s5pv210-i2s"; reg = <0x03830000 0x100>; clocks = <&clock_audss EXYNOS_I2S_BUS>, diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index f280954b260ad440783b3d24f453365e1628458f..82c32d4d83d86d5d0f612ea31b7734111c7e4818 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -843,7 +843,7 @@ }; }; - pinctrl@03860000 { + pinctrl@3860000 { gpz: gpz { gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 0c89ea99de545dd63ba132295758101089eab15b..acd2b2286ccb7d33aaf9d98656cc976162e8acef 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -31,7 +31,7 @@ stdout-path = &serial_2; }; - sysram@02020000 { + sysram@2020000 { smp-sysram@0 { status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 768fb075b1fd1b520b17f908e7797267200a1bde..03dd61f6480955e657ea3b53e043c2fa4735770b 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -64,7 +64,7 @@ }; }; - sysram: sysram@02020000 { + sysram: sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x20000>; #address-cells = <1>; @@ -151,7 +151,7 @@ }; }; - pinctrl_2: pinctrl@03860000 { + pinctrl_2: pinctrl@3860000 { compatible = "samsung,exynos4210-pinctrl"; reg = <0x03860000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index 14ce2c69bc0b4972d4cb4817fcfaaca0b8b953d4..bda49b232f7bb56d367bf8f150e594c4c0d0efc3 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -26,7 +26,7 @@ reg = <0x40000000 0x40000000>; }; - firmware@0203F000 { + firmware@203f000 { compatible = "samsung,secure-firmware"; reg = <0x0203F000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 102acd78be15a9a972a2334cb520021424045ba0..a21be71000c1b1996271901b1497be2e0307b69a 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -20,7 +20,7 @@ stdout-path = &serial_1; }; - firmware@0204F000 { + firmware@204f000 { compatible = "samsung,secure-firmware"; reg = <0x0204F000 0x1000>; }; @@ -31,8 +31,6 @@ pinctrl-0 = <&gpio_power_key>; power_key { - interrupt-parent = <&gpx1>; - interrupts = <3 IRQ_TYPE_NONE>; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = ; label = "power key"; @@ -253,7 +251,7 @@ samsung,i2c-max-bus-freq = <400000>; status = "okay"; - usb3503: usb3503@08 { + usb3503: usb3503@8 { compatible = "smsc,usb3503"; reg = <0x08>; @@ -263,7 +261,7 @@ initial-mode = <1>; }; - max77686: pmic@09 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 97882267ef093ded9a513e728ee097fdcd0efcbf..acf48a018e5ec20227907c618ebb1db892dadfd4 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -43,8 +43,6 @@ pinctrl-0 = <&gpio_power_key &gpio_home_key>; home_key { - interrupt-parent = <&gpx2>; - interrupts = <2 IRQ_TYPE_NONE>; gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; linux,code = ; label = "home key"; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 8a89eb893d644d46ad79d7f3e7161edb2d0eccf0..b0b5ec7903a53e91ac6f235d3167b0bbb6846b90 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -32,7 +32,7 @@ stdout-path = &serial_2; }; - firmware@0203F000 { + firmware@203f000 { compatible = "samsung,secure-firmware"; reg = <0x0203F000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi index 1d27c28564e4dbce4f2eb27b79137765530bd7b3..4eebd4721a5f505e1f563467cef78115d93e8844 100644 --- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi @@ -899,7 +899,7 @@ }; }; - pinctrl_2: pinctrl@03860000 { + pinctrl_2: pinctrl@3860000 { gpz: gpz { gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index bceb919ac6379ad8d5034913b32ecdfd436a7030..220cdf109405463d5f643efa4310a865e49fa25c 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -18,6 +18,7 @@ #include #include #include +#include / { model = "Samsung Trats 2 based on Exynos4412"; @@ -40,7 +41,7 @@ stdout-path = &serial_2; }; - firmware@0204F000 { + firmware@204f000 { compatible = "samsung,secure-firmware"; reg = <0x0204F000 0x1000>; }; @@ -97,6 +98,34 @@ gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vsil12: voltage-regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "VSIL_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&buck7_reg>; + }; + + vcc33mhl: voltage-regulator-7 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3.3_MHL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc18mhl: voltage-regulator-8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8_MHL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; gpio-keys { @@ -206,7 +235,7 @@ #size-cells = <0>; status = "okay"; - ak8975@0c { + ak8975@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; @@ -229,6 +258,36 @@ }; }; + i2c-mhl { + compatible = "i2c-gpio"; + gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <100>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&i2c_mhl_bus>; + pinctrl-names = "default"; + status = "okay"; + + sii9234: hdmi-bridge@39 { + compatible = "sil,sii9234"; + avcc33-supply = <&vcc33mhl>; + iovcc18-supply = <&vcc18mhl>; + avcc12-supply = <&vsil12>; + cvcc12-supply = <&vsil12>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x39>; + + port { + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + }; + }; + camera: camera { pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; @@ -501,6 +560,29 @@ status = "okay"; }; +&hdmi { + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + vdd-supply = <&ldo3_reg>; + vdd_osc-supply = <&ldo4_reg>; + vdd_pll-supply = <&ldo3_reg>; + ddc = <&i2c_5>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + hdmi_to_mhl: endpoint { + remote-endpoint = <&mhl_to_hdmi>; + }; + }; + }; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; @@ -579,6 +661,10 @@ }; }; +&i2c_5 { + status = "okay"; +}; + &i2c_7 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; @@ -587,7 +673,7 @@ pinctrl-names = "default"; status = "okay"; - max77686: max77686_pmic@09 { + max77686: max77686_pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_NONE>; @@ -873,12 +959,20 @@ }; }; +&i2c_8 { + status = "okay"; +}; + &i2s0 { pinctrl-0 = <&i2s0_bus>; pinctrl-names = "default"; status = "okay"; }; +&mixer { + status = "okay"; +}; + &mshc_0 { broken-cd; non-removable; @@ -904,6 +998,18 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep0>; + mhl_int: mhl-int { + samsung,pins = "gpf3-5"; + samsung,pin-pud = ; + }; + + i2c_mhl_bus: i2c-mhl-bus { + samsung,pins = "gpf0-4", "gpf0-6"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + sleep0: sleep-states { PIN_SLP(gpa0-0, INPUT, NONE); PIN_SLP(gpa0-1, OUT0, NONE); @@ -1007,6 +1113,11 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep1>; + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = ; + }; + sleep1: sleep-states { PIN_SLP(gpk0-0, PREV, NONE); PIN_SLP(gpk0-1, PREV, NONE); diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 7ff03a7e8fb93e9cfcdeb89c1bd39e85e12f5bd8..b255ac55b1c1ea11c375f64723eb3dc1a1a8ccd4 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -150,7 +150,7 @@ }; }; - sysram@02020000 { + sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x40000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 18a7f396ac5f727b4daa0c15b2723b3ca89035d2..0efd678b8251933c7555871cc810596d0112b3cc 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -152,6 +152,8 @@ }; &hdmi { + status = "okay"; + ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; @@ -455,15 +457,9 @@ &i2c_2 { status = "okay"; - + /* used by HDMI DDC */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x50>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; }; &i2c_3 { @@ -489,15 +485,9 @@ &i2c_8 { status = "okay"; - + /* used by HDMI PHY */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x38>; - - hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; }; &i2c_9 { @@ -516,6 +506,10 @@ status = "okay"; }; +&mixer { + status = "okay"; +}; + &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 062cba4c2c310b28846634d354b10fe4d07e786c..1e3f9627766cd2a26ace998f76d9cb13fcb669fb 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -116,6 +116,8 @@ }; &hdmi { + status = "okay"; + ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; }; @@ -129,7 +131,7 @@ reg = <0x50>; }; - max77686@09 { + max77686@9 { compatible = "maxim,max77686"; reg = <0x09>; interrupt-parent = <&gpx3>; @@ -308,24 +310,16 @@ &i2c_2 { status = "okay"; + /* used by HDMI DDC */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; }; &i2c_8 { status = "okay"; + /* used by HDMI PHY */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - - hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; }; &i2c_9 { @@ -344,6 +338,10 @@ status = "okay"; }; +&mixer { + status = "okay"; +}; + &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 8788880e459d3e1dde6bfddbe80ae3c631693d89..2e7175d2b1b86736762325687e3dde3b590ca1b5 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -261,10 +261,10 @@ }; &hdmi { + status = "okay"; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; ddc = <&i2c_2>; hdmi-en-supply = <&tps65090_fet7>; vdd-supply = <&ldo8_reg>; @@ -281,7 +281,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - max77686: max77686@09 { + max77686: max77686@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_NONE>; @@ -450,13 +450,9 @@ &i2c_2 { status = "okay"; + /* used by HDMI DDC */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; }; &i2c_3 { @@ -514,19 +510,19 @@ &i2c_8 { status = "okay"; + /* used by HDMI PHY */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - - hdmiphy: hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; }; &i2s0 { status = "okay"; }; +&mixer { + status = "okay"; +}; + /* eMMC flash */ &mmc_0 { status = "okay"; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index d53bfcbeb39c42f3789514953f152413418d0d49..47dbc50546c104d8fc9e8e8c15201409b50a0913 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -91,10 +91,10 @@ }; &hdmi { + status = "okay"; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; ddc = <&i2c_2>; hdmi-en-supply = <&ldo8_reg>; vdd-supply = <&ldo8_reg>; @@ -362,13 +362,9 @@ &i2c_2 { status = "okay"; + /* used by HDMI DDC */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; }; &i2c_3 { @@ -412,19 +408,19 @@ &i2c_8 { status = "okay"; + /* used by HDMI PHY */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - - hdmiphy: hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; }; &i2s0 { status = "okay"; }; +&mixer { + status = "okay"; +}; + &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 8dbeb873e99ca8bac4badd0532c75d14699337b6..5286084e103283dd7f5d17fe74973420bee8f010 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -93,7 +93,7 @@ }; soc: soc { - sysram@02020000 { + sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x30000>; #address-cells = <1>; @@ -219,7 +219,7 @@ interrupts = ; }; - pinctrl_3: pinctrl@03860000 { + pinctrl_3: pinctrl@3860000 { compatible = "samsung,exynos5250-pinctrl"; reg = <0x03860000 0x1000>; interrupts = ; @@ -367,6 +367,11 @@ clocks = <&clock CLK_I2C_HDMI>; clock-names = "i2c"; status = "disabled"; + + hdmiphy: hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; }; i2c_9: i2c@121D0000 { @@ -475,7 +480,7 @@ status = "disabled"; }; - i2s0: i2s@03830000 { + i2s0: i2s@3830000 { compatible = "samsung,s5pv210-i2s"; status = "disabled"; reg = <0x03830000 0x100>; @@ -637,7 +642,7 @@ }; gsc_0: gsc@13e00000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = ; power-domains = <&pd_gsc>; @@ -647,7 +652,7 @@ }; gsc_1: gsc@13e10000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = ; power-domains = <&pd_gsc>; @@ -657,7 +662,7 @@ }; gsc_2: gsc@13e20000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e20000 0x1000>; interrupts = ; power-domains = <&pd_gsc>; @@ -667,7 +672,7 @@ }; gsc_3: gsc@13e30000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e30000 0x1000>; interrupts = ; power-domains = <&pd_gsc>; @@ -687,6 +692,8 @@ clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; samsung,syscon-phandle = <&pmu_system_controller>; + phy = <&hdmiphy>; + status = "disabled"; }; hdmicec: cec@101B0000 { @@ -702,7 +709,7 @@ status = "disabled"; }; - mixer@14450000 { + mixer: mixer@14450000 { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; power-domains = <&pd_disp1>; @@ -711,6 +718,7 @@ <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "hdmi", "sclk_hdmi"; iommus = <&sysmmu_tv>; + status = "disabled"; }; dp_phy: video-phy { diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index c4de1353e5dfe6616a06f5a596a9a30929dd0022..a45eaae33f8f9ca756840eaadfbdf15503f44a9b 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -54,7 +54,7 @@ #clock-cells = <0>; }; - firmware@02073000 { + firmware@2073000 { compatible = "samsung,secure-firmware"; reg = <0x02073000 0x1000>; }; @@ -164,7 +164,7 @@ samsung,i2c-max-bus-freq = <400000>; status = "okay"; - usb3503: usb-hub@08 { + usb3503: usb-hub@8 { compatible = "smsc,usb3503"; reg = <0x08>; @@ -178,7 +178,7 @@ refclk-frequency = <24000000>; }; - max77802: pmic@09 { + max77802: pmic@9 { compatible = "maxim,max77802"; reg = <0x9>; interrupt-parent = <&gpx0>; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index 9cb7726ef8d0dbc1f4bb6964acc64bc34abd566e..25f21e9e7d587b3c8fce954ff39b9aa44e9d5ef0 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -32,7 +32,7 @@ #clock-cells = <0>; }; - firmware@02037000 { + firmware@2037000 { compatible = "samsung,secure-firmware"; reg = <0x02037000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 7eab4bc07cec6cde6b645823040ea708d1936dad..06713ec86f0dad73586e553eb900d284393110ca 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -187,7 +187,7 @@ interrupts = ; }; - pinctrl_3: pinctrl@03860000 { + pinctrl_3: pinctrl@3860000 { compatible = "samsung,exynos5410-pinctrl"; reg = <0x03860000 0x1000>; interrupts = ; @@ -223,7 +223,7 @@ }; }; - audi2s0: i2s@03830000 { + audi2s0: i2s@3830000 { compatible = "samsung,exynos5420-i2s"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index ee1bb9b8b36681aa95f67b0bc02a23e40b35ec05..bc78575d8a4de483be3f948c961088529eec9734 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -30,7 +30,7 @@ bootargs = "console=ttySAC3,115200"; }; - firmware@02073000 { + firmware@2073000 { compatible = "samsung,secure-firmware"; reg = <0x02073000 0x1000>; }; @@ -360,6 +360,10 @@ status = "okay"; }; +&mixer { + status = "okay"; +}; + &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi index 5c052d7ff55460d2a965c5ed55e20e475ed1b24c..d7d703aa1699ded9804162b2ed1b089fd625acec 100644 --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -36,6 +36,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu1: cpu@1 { @@ -48,6 +49,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu2: cpu@2 { @@ -60,6 +62,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu3: cpu@3 { @@ -72,6 +75,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu4: cpu@100 { @@ -85,6 +89,7 @@ cooling-min-level = <0>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu5: cpu@101 { @@ -97,6 +102,7 @@ cooling-min-level = <0>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu6: cpu@102 { @@ -109,6 +115,7 @@ cooling-min-level = <0>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu7: cpu@103 { @@ -121,6 +128,7 @@ cooling-min-level = <0>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 683a4cfb4a23d469ba91670f414e27ea03d57f5a..38af8769711c28a571c09314f3040601de6e2e92 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -696,6 +696,10 @@ status = "okay"; }; +&mixer { + status = "okay"; +}; + /* eMMC flash */ &mmc_0 { status = "okay"; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 08c8ab173e871fdbea71bbea7207998dbe780daa..310d8637ce9f400c8ff2d89f0ce59d40030f9d17 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -130,6 +130,7 @@ &hdmi { status = "okay"; + ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; @@ -347,12 +348,12 @@ &i2c_2 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + /* used by HDMI DDC */ status = "okay"; +}; - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; +&mixer { + status = "okay"; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 02d2f898efa6cbe1041f102de9b3445999a6bea3..8aa2cc7aa125f5513a8333d84f8caae7a67fd3e6 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -352,7 +352,7 @@ interrupts = ; }; - pinctrl_4: pinctrl@03860000 { + pinctrl_4: pinctrl@3860000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x03860000 0x1000>; interrupts = ; @@ -365,7 +365,7 @@ interrupt-parent = <&gic>; ranges; - adma: adma@03880000 { + adma: adma@3880000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x03880000 0x1000>; interrupts = ; @@ -429,7 +429,7 @@ }; }; - i2s0: i2s@03830000 { + i2s0: i2s@3830000 { compatible = "samsung,exynos5420-i2s"; reg = <0x03830000 0x100>; dmas = <&adma 0 @@ -646,6 +646,7 @@ clock-names = "mixer", "hdmi", "sclk_hdmi"; power-domains = <&disp_pd>; iommus = <&sysmmu_tv>; + status = "disabled"; }; rotator: rotator@11C00000 { @@ -658,7 +659,7 @@ }; gsc_0: video-scaler@13e00000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = ; clocks = <&clock CLK_GSCL0>; @@ -668,7 +669,7 @@ }; gsc_1: video-scaler@13e10000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = ; clocks = <&clock CLK_GSCL1>; diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index bf3c6f1ec4ee3c48b9a01a2b31ce97a87d67a00b..ec01d8020c2da99a1096514a93bbaadea14a03af 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -35,6 +35,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu1: cpu@101 { @@ -47,6 +48,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu2: cpu@102 { @@ -59,6 +61,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu3: cpu@103 { @@ -71,6 +74,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu4: cpu@0 { @@ -84,6 +88,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu5: cpu@1 { @@ -96,6 +101,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu6: cpu@2 { @@ -108,6 +114,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu7: cpu@3 { @@ -120,6 +127,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..a5b8d0f0877e728cafc0b931e0637084659dd3fd --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -0,0 +1,443 @@ +/* + * Hardkernel Odroid XU3/XU4/HC1 boards core device tree source + * + * Copyright (c) 2017 Marek Szyprowski + * Copyright (c) 2013-2017 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include "exynos5800.dtsi" +#include "exynos5422-cpus.dtsi" + +/ { + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x7EA00000>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; +}; + +&bus_wcore { + devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>, + <&nocp_mem1_0>, <&nocp_mem1_1>; + vdd-supply = <&buck3_reg>; + exynos,saturation-ratio = <100>; + status = "okay"; +}; + +&bus_noc { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_fsys_apb { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_fsys { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_fsys2 { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_mfc { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_gen { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_peri { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_g2d { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_g2d_acp { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_jpeg { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_jpeg_apb { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_disp1_fimd { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_disp1 { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_gscl_scaler { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_mscl { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&buck6_reg>; +}; + +&cpu4 { + cpu-supply = <&buck2_reg>; +}; + +&hsi2c_4 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + samsung,s2mps11-acokb-ground; + + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&s2mps11_irq>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "vddq_mmc0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "vdd_adc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_ldo6"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vddq_mmc2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "vdd_ldo16"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "tsp_avdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo18_reg: LDO18 { + regulator-name = "vdd_emmc_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "tsp_io"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo26_reg: LDO26 { + regulator-name = "vdd_ldo26"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_mem"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1.0v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_1.8v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2.8v_ldo"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3750000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_vmem"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; + vmmc-supply = <&ldo19_reg>; + vqmmc-supply = <&ldo13_reg>; +}; + +&nocp_mem0_0 { + status = "okay"; +}; + +&nocp_mem0_1 { + status = "okay"; +}; + +&nocp_mem1_0 { + status = "okay"; +}; + +&nocp_mem1_1 { + status = "okay"; +}; + +&pinctrl_0 { + s2mps11_irq: s2mps11-irq { + samsung,pins = "gpx0-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; +}; + +&tmu_cpu0 { + vtmu-supply = <&ldo7_reg>; +}; + +&tmu_cpu1 { + vtmu-supply = <&ldo7_reg>; +}; + +&tmu_cpu2 { + vtmu-supply = <&ldo7_reg>; +}; + +&tmu_cpu3 { + vtmu-supply = <&ldo7_reg>; +}; + +&tmu_gpu { + vtmu-supply = <&ldo7_reg>; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +/* usbdrd_dwc3_1 mode customized in each board */ + +&usbdrd3_0 { + vdd33-supply = <&ldo9_reg>; + vdd10-supply = <&ldo11_reg>; +}; + +&usbdrd3_1 { + vdd33-supply = <&ldo9_reg>; + vdd10-supply = <&ldo11_reg>; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts new file mode 100644 index 0000000000000000000000000000000000000000..fb8e8ae776e9bd62b1ea6a2fc87312a67cc3caf1 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -0,0 +1,213 @@ +/* + * Hardkernel Odroid HC1 board device tree source + * + * Copyright (c) 2017 Marek Szyprowski + * Copyright (c) 2017 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5422-odroid-core.dtsi" + +/ { + model = "Hardkernel Odroid HC1"; + compatible = "hardkernel,odroid-hc1", "samsung,exynos5800", \ + "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0 0>; + trips { + cpu0_alert0: cpu-alert-0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu0_alert1: cpu-alert-1 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu0_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* + * When reaching cpu0_alert0, reduce CPU + * by 2 steps. On Exynos5422/5800 that would + * be: 1600 MHz and 1100 MHz. + */ + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&cpu0 0 2>; + }; + map1 { + trip = <&cpu0_alert0>; + cooling-device = <&cpu4 0 2>; + }; + /* + * When reaching cpu0_alert1, reduce CPU + * further, down to 600 MHz (12 steps for big, + * 7 steps for LITTLE). + */ + map2 { + trip = <&cpu0_alert1>; + cooling-device = <&cpu0 3 7>; + }; + map3 { + trip = <&cpu0_alert1>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1 0>; + trips { + cpu1_alert0: cpu-alert-0 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + cpu1_alert1: cpu-alert-1 { + temperature = <85000>; + hysteresis = <10000>; + type = "active"; + }; + cpu1_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&cpu0 0 2>; + }; + map1 { + trip = <&cpu1_alert0>; + cooling-device = <&cpu4 0 2>; + }; + map2 { + trip = <&cpu1_alert1>; + cooling-device = <&cpu0 3 7>; + }; + map3 { + trip = <&cpu1_alert1>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2 0>; + trips { + cpu2_alert0: cpu-alert-0 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + cpu2_alert1: cpu-alert-1 { + temperature = <85000>; + hysteresis = <10000>; + type = "active"; + }; + cpu2_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&cpu0 0 2>; + }; + map1 { + trip = <&cpu2_alert0>; + cooling-device = <&cpu4 0 2>; + }; + map2 { + trip = <&cpu2_alert1>; + cooling-device = <&cpu0 3 7>; + }; + map3 { + trip = <&cpu2_alert1>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3 0>; + trips { + cpu3_alert0: cpu-alert-0 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + cpu3_alert1: cpu-alert-1 { + temperature = <85000>; + hysteresis = <10000>; + type = "active"; + }; + cpu3_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&cpu0 0 2>; + }; + map1 { + trip = <&cpu3_alert0>; + cooling-device = <&cpu4 0 2>; + }; + map2 { + trip = <&cpu3_alert1>; + cooling-device = <&cpu0 3 7>; + }; + map3 { + trip = <&cpu3_alert1>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + }; + +}; + +&pwm { + /* + * PWM 2 -- Blue LED + */ + pinctrl-0 = <&pwm2_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <2>; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index c0b85981c6bf741dadd6d9fd6e91ddd79e808c2f..da3141a307d5ea1dd3ab576b726d1ef5227bb48b 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -11,6 +11,8 @@ * published by the Free Software Foundation. */ +#include + / { sound: sound { compatible = "simple-audio-card"; @@ -43,6 +45,17 @@ }; }; +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FIN_PLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, + <0>, + <19200000>; +}; + &hsi2c_5 { status = "okay"; max98090: max98090@10 { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index a183b56283f8ff9e9d41d616edfc00a82d200267..445c6c5a13001610f11f03f24a2a2d19bc969ed9 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -12,32 +12,28 @@ * published by the Free Software Foundation. */ -#include -#include -#include -#include -#include "exynos5800.dtsi" -#include "exynos5422-cpus.dtsi" +#include +#include "exynos5422-odroid-core.dtsi" / { - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x7EA00000>; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - firmware@02073000 { - compatible = "samsung,secure-firmware"; - reg = <0x02073000 0x1000>; - }; - - fixed-rate-clocks { - oscclk { - compatible = "samsung,exynos5420-oscclk"; - clock-frequency = <24000000>; + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key>; + + power_key { + /* + * The power button (SW2) is connected to the PWRON + * pin (active high) of the S2MPS11 PMIC, which acts + * as a 16ms debouce filter and signal inverter with + * output on ONOB pin (active low). ONOB PMIC pin is + * then connected to XEINT3 SoC pin. + */ + gpios = <&gpx0 3 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "power key"; + debounce-interval = <0>; + wakeup-source; }; }; @@ -63,22 +59,22 @@ polling-delay-passive = <250>; polling-delay = <0>; trips { - cpu_alert0: cpu-alert-0 { + cpu0_alert0: cpu-alert-0 { temperature = <50000>; /* millicelsius */ hysteresis = <5000>; /* millicelsius */ type = "active"; }; - cpu_alert1: cpu-alert-1 { + cpu0_alert1: cpu-alert-1 { temperature = <60000>; /* millicelsius */ hysteresis = <5000>; /* millicelsius */ type = "active"; }; - cpu_alert2: cpu-alert-2 { + cpu0_alert2: cpu-alert-2 { temperature = <70000>; /* millicelsius */ hysteresis = <5000>; /* millicelsius */ type = "active"; }; - cpu_crit0: cpu-crit-0 { + cpu0_crit0: cpu-crit-0 { temperature = <120000>; /* millicelsius */ hysteresis = <0>; /* millicelsius */ type = "critical"; @@ -87,59 +83,258 @@ * Exynos542x supports only 4 trip-points * so for these polling mode is required. * Start polling at temperature level of last - * interrupt-driven trip: cpu_alert2 + * interrupt-driven trip: cpu0_alert2 */ - cpu_alert3: cpu-alert-3 { + cpu0_alert3: cpu-alert-3 { temperature = <70000>; /* millicelsius */ hysteresis = <10000>; /* millicelsius */ type = "passive"; }; - cpu_alert4: cpu-alert-4 { + cpu0_alert4: cpu-alert-4 { temperature = <85000>; /* millicelsius */ hysteresis = <10000>; /* millicelsius */ type = "passive"; }; - }; cooling-maps { map0 { - trip = <&cpu_alert0>; + trip = <&cpu0_alert0>; cooling-device = <&fan0 0 1>; }; map1 { - trip = <&cpu_alert1>; + trip = <&cpu0_alert1>; cooling-device = <&fan0 1 2>; }; map2 { - trip = <&cpu_alert2>; + trip = <&cpu0_alert2>; cooling-device = <&fan0 2 3>; }; /* - * When reaching cpu_alert3, reduce CPU + * When reaching cpu0_alert3, reduce CPU * by 2 steps. On Exynos5422/5800 that would * be: 1600 MHz and 1100 MHz. */ map3 { - trip = <&cpu_alert3>; + trip = <&cpu0_alert3>; cooling-device = <&cpu0 0 2>; }; map4 { - trip = <&cpu_alert3>; + trip = <&cpu0_alert3>; cooling-device = <&cpu4 0 2>; }; - /* - * When reaching cpu_alert4, reduce CPU - * further, down to 600 MHz (11 steps for big, + * When reaching cpu0_alert4, reduce CPU + * further, down to 600 MHz (12 steps for big, * 7 steps for LITTLE). */ map5 { - trip = <&cpu_alert4>; + trip = <&cpu0_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu0_alert4>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu1_alert0: cpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + cpu1_alert1: cpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + cpu1_alert2: cpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + cpu1_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + cpu1_alert3: cpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + cpu1_alert4: cpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu1_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&cpu1_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu1_alert3>; + cooling-device = <&cpu4 0 2>; + }; + map5 { + trip = <&cpu1_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu1_alert4>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu2_alert0: cpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + cpu2_alert1: cpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + cpu2_alert2: cpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + cpu2_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + cpu2_alert3: cpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + cpu2_alert4: cpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu2_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&cpu2_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu2_alert3>; + cooling-device = <&cpu4 0 2>; + }; + map5 { + trip = <&cpu2_alert4>; cooling-device = <&cpu0 3 7>; }; map6 { - trip = <&cpu_alert4>; - cooling-device = <&cpu4 3 11>; + trip = <&cpu2_alert4>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu3_alert0: cpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + cpu3_alert1: cpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + cpu3_alert2: cpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + cpu3_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + cpu3_alert3: cpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + cpu3_alert4: cpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu3_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&cpu3_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu3_alert3>; + cooling-device = <&cpu4 0 2>; + }; + map5 { + trip = <&cpu3_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu3_alert4>; + cooling-device = <&cpu4 3 12>; }; }; }; @@ -151,110 +346,9 @@ status = "okay"; }; -&bus_wcore { - devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>, - <&nocp_mem1_0>, <&nocp_mem1_1>; - vdd-supply = <&buck3_reg>; - exynos,saturation-ratio = <100>; - status = "okay"; -}; - -&bus_noc { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_fsys_apb { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_fsys { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_fsys2 { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_mfc { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_gen { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_peri { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_g2d { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_g2d_acp { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_jpeg { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_jpeg_apb { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_disp1_fimd { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_disp1 { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_gscl_scaler { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_mscl { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&clock_audss { - assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>; - assigned-clock-parents = <&clock CLK_FIN_PLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, - <0>, - <19200000>; -}; - -&cpu0 { - cpu-supply = <&buck6_reg>; -}; - -&cpu4 { - cpu-supply = <&buck2_reg>; -}; - &hdmi { status = "okay"; + ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; @@ -269,246 +363,15 @@ needs-hpd; }; -&hsi2c_4 { - status = "okay"; - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - samsung,s2mps11-acokb-ground; - - interrupt-parent = <&gpx0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&s2mps11_irq>; - - s2mps11_osc: clocks { - #clock-cells = <1>; - clock-output-names = "s2mps11_ap", - "s2mps11_cp", "s2mps11_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "vdd_ldo1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "vddq_mmc0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo4_reg: LDO4 { - regulator-name = "vdd_adc"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo5_reg: LDO5 { - regulator-name = "vdd_ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "vdd_ldo6"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "vdd_ldo7"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "vdd_ldo8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo9_reg: LDO9 { - regulator-name = "vdd_ldo9"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "vdd_ldo10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "vdd_ldo11"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "vdd_ldo12"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "vddq_mmc2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo15_reg: LDO15 { - regulator-name = "vdd_ldo15"; - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - regulator-always-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "vdd_ldo16"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "tsp_avdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo18_reg: LDO18 { - regulator-name = "vdd_emmc_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: LDO19 { - regulator-name = "vdd_sd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo24_reg: LDO24 { - regulator-name = "tsp_io"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo26_reg: LDO26 { - regulator-name = "vdd_ldo26"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "vdd_mem"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "vdd_kfc"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "vdd_1.0v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "vdd_1.8v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "vdd_2.8v_ldo"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3750000>; - regulator-always-on; - regulator-boot-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "vdd_vmem"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - &i2c_2 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + /* used by HDMI DDC */ status = "okay"; +}; - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; +&mixer { + status = "okay"; }; &mmc_0 { @@ -530,48 +393,18 @@ vqmmc-supply = <&ldo3_reg>; }; -&mmc_2 { - status = "okay"; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - bus-width = <4>; - cap-sd-highspeed; - vmmc-supply = <&ldo19_reg>; - vqmmc-supply = <&ldo13_reg>; -}; - -&nocp_mem0_0 { - status = "okay"; -}; - -&nocp_mem0_1 { - status = "okay"; -}; - -&nocp_mem1_0 { - status = "okay"; -}; - -&nocp_mem1_1 { - status = "okay"; -}; - &pinctrl_0 { - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; + power_key: power-key { + samsung,pins = "gpx0-3"; samsung,pin-function = ; - samsung,pin-pud = ; + samsung,pin-pud = ; samsung,pin-drv = ; }; - s2mps11_irq: s2mps11-irq { - samsung,pins = "gpx0-4"; - samsung,pin-function = ; - samsung,pin-pud = ; + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = ; + samsung,pin-pud = ; samsung,pin-drv = ; }; }; @@ -584,45 +417,3 @@ samsung,pin-drv = ; }; }; - -&tmu_cpu0 { - vtmu-supply = <&ldo7_reg>; -}; - -&tmu_cpu1 { - vtmu-supply = <&ldo7_reg>; -}; - -&tmu_cpu2 { - vtmu-supply = <&ldo7_reg>; -}; - -&tmu_cpu3 { - vtmu-supply = <&ldo7_reg>; -}; - -&tmu_gpu { - vtmu-supply = <&ldo7_reg>; -}; - -&rtc { - status = "okay"; - clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; - clock-names = "rtc", "rtc_src"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "host"; -}; - -/* usbdrd_dwc3_1 mode customized in each board */ - -&usbdrd3_0 { - vdd33-supply = <&ldo9_reg>; - vdd10-supply = <&ldo11_reg>; -}; - -&usbdrd3_1 { - vdd33-supply = <&ldo9_reg>; - vdd10-supply = <&ldo11_reg>; -}; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index 92bd2c6f76316171718d1d3f4fb63b9daa9be4d1..7eafad333bdb2fda8e5fb0f2bca5d3c2b32b6fdf 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -56,7 +56,7 @@ samsung,spi-feedback-delay = <0>; }; - partition@00000 { + partition@0 { label = "BootLoader"; reg = <0x60000 0x80000>; read-only; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 7a00be7ea6d716e38bf979a6d9e4da7397f7dfd1..9c3c75ae5e48813ad5b43ac57b054e0ce4a797b8 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -196,7 +196,7 @@ clock-names = "watchdog"; }; - gmac: ethernet@00230000 { + gmac: ethernet@230000 { compatible = "snps,dwmac-3.70a", "snps,dwmac"; reg = <0x00230000 0x8000>; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index 0389e8a10d0bd353744e176360c4485fffdcd759..a5007f182bc4a1106340ddba33be64d22d3e8041 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -29,7 +29,7 @@ }; soc: soc { - sysram@02020000 { + sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x54000>; #address-cells = <1>; @@ -134,6 +134,7 @@ interrupts = ; phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; phy-names = "usb2-phy", "usb3-phy"; + snps,dis_u3_susphy_quirk; }; }; @@ -154,6 +155,7 @@ reg = <0x12400000 0x10000>; phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; phy-names = "usb2-phy", "usb3-phy"; + snps,dis_u3_susphy_quirk; }; }; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index 8613944ea5c5e5e7301889bff99c989ac68fd580..6a9fdc0760f0ea8c7ad502cd70dc009d49b58a59 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -50,7 +50,7 @@ reg = <0x0 0x7c0000>; }; - root@07c0000 { + root@7c0000 { label = "root"; reg = <0x7c0000 0x7840000>; }; diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index b9b07d0895cfaef1ba465cc4b12542bd89660ad1..cb5c925bd59729310530002d5df5bfae35d0f718 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -142,6 +142,12 @@ groups = "idegrp"; }; }; + tvc_default_pins: pinctrl-tvc { + mux { + function = "tvc"; + groups = "tvcgrp"; + }; + }; }; }; @@ -348,5 +354,20 @@ memcpy-bus-width = <32>; #dma-cells = <2>; }; + + display-controller@6a000000 { + compatible = "cortina,gemini-tvc", "faraday,tve200"; + reg = <0x6a000000 0x1000>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_TVC>; + clocks = <&syscon GEMINI_CLK_GATE_TVC>, + <&syscon GEMINI_CLK_TVC>; + clock-names = "PCLK", "TVE"; + pinctrl-names = "default"; + pinctrl-0 = <&tvc_default_pins>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi index 9d5fd5cfefa668d068adfd13ea720bc7267e4844..f7cf4f53e764dc41d908dad12d0675e5911c18bf 100644 --- a/arch/arm/boot/dts/hip01.dtsi +++ b/arch/arm/boot/dts/hip01.dtsi @@ -91,14 +91,14 @@ reboot-offset = <0x4>; }; - global_timer@0a000200 { + global_timer@a000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x0a000200 0x100>; interrupts = <1 11 0xf04>; clocks = <&hisi_refclk144mhz>; }; - local_timer@0a000600 { + local_timer@a000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x0a000600 0x100>; interrupts = <1 13 0xf04>; diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts index 40a9e33c2654e3ab694d742328d2d8d4becfefff..ca48641d0f48d69f914cc56901fe7b7b864f966d 100644 --- a/arch/arm/boot/dts/hip04-d01.dts +++ b/arch/arm/boot/dts/hip04-d01.dts @@ -18,7 +18,7 @@ model = "Hisilicon D01 Development Board"; compatible = "hisilicon,hip04-d01"; - memory@00000000,10000000 { + memory@0,10000000 { device_type = "memory"; reg = <0x00000000 0x10000000 0x00000000 0xc0000000>, <0x00000004 0xc0000000 0x00000003 0x40000000>; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index 6c712a97e1fef042b00c8fe55d406e78285b973e..50d3f8426da17dc3b36dc85c196aefcb9176f6c3 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -39,7 +39,7 @@ compatible = "simple-bus"; ranges; - timer0: timer@00002000 { + timer0: timer@2000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00002000 0x1000>; /* timer00 & timer01 */ @@ -48,7 +48,7 @@ status = "disabled"; }; - timer1: timer@00a29000 { + timer1: timer@a29000 { /* * Only used in NORMAL state, not available ins * SLOW or DOZE state. @@ -62,7 +62,7 @@ status = "disabled"; }; - timer2: timer@00a2a000 { + timer2: timer@a2a000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00a2a000 0x1000>; /* timer20 & timer21 */ @@ -71,7 +71,7 @@ status = "disabled"; }; - timer3: timer@00a2b000 { + timer3: timer@a2b000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00a2b000 0x1000>; /* timer30 & timer31 */ @@ -80,7 +80,7 @@ status = "disabled"; }; - timer4: timer@00a81000 { + timer4: timer@a81000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00a81000 0x1000>; /* timer30 & timer31 */ @@ -89,7 +89,7 @@ status = "disabled"; }; - uart0: uart@00b00000 { + uart0: uart@b00000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00b00000 0x1000>; interrupts = <0 49 4>; @@ -98,7 +98,7 @@ status = "disabled"; }; - uart1: uart@00006000 { + uart1: uart@6000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00006000 0x1000>; interrupts = <0 50 4>; @@ -107,7 +107,7 @@ status = "disabled"; }; - uart2: uart@00b02000 { + uart2: uart@b02000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00b02000 0x1000>; interrupts = <0 51 4>; @@ -116,7 +116,7 @@ status = "disabled"; }; - uart3: uart@00b03000 { + uart3: uart@b03000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00b03000 0x1000>; interrupts = <0 52 4>; @@ -125,7 +125,7 @@ status = "disabled"; }; - uart4: uart@00b04000 { + uart4: uart@b04000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb04000 0x1000>; interrupts = <0 53 4>; @@ -199,7 +199,7 @@ status = "disabled"; }; - gpio5: gpio@004000 { + gpio5: gpio@4000 { compatible = "arm,pl061", "arm,primecell"; reg = <0x004000 0x1000>; interrupts = <0 113 0x4>; @@ -378,7 +378,7 @@ }; }; - local_timer@00a00600 { + local_timer@a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; interrupts = <1 13 0xf01>; @@ -392,7 +392,7 @@ cache-level = <2>; }; - sysctrl: system-controller@00000000 { + sysctrl: system-controller@0 { compatible = "hisilicon,sysctrl", "syscon"; reg = <0x00000000 0x1000>; }; @@ -404,7 +404,7 @@ mask = <0xdeadbeef>; }; - cpuctrl@00a22000 { + cpuctrl@a22000 { compatible = "hisilicon,cpuctrl"; #address-cells = <1>; #size-cells = <1>; @@ -489,7 +489,7 @@ clocks = <&clock HIX5HD2_SATA_CLK>; }; - ir: ir@001000 { + ir: ir@1000 { compatible = "hisilicon,hix5hd2-ir"; reg = <0x001000 0x1000>; interrupts = <0 47 4>; diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index 38d712be5685a8eeb989f64125a634df1ed8a339..20f6565c337d700a13fcf6071c4c236e4563f280 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -40,7 +40,7 @@ spi1 = &cspi2; }; - aitc: aitc-interrupt-controller@00223000 { + aitc: aitc-interrupt-controller@223000 { compatible = "fsl,imx1-aitc", "fsl,avic"; interrupt-controller; #interrupt-cells = <1>; @@ -69,14 +69,14 @@ interrupt-parent = <&aitc>; ranges; - aipi@00200000 { + aipi@200000 { compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x00200000 0x10000>; ranges; - gpt1: timer@00202000 { + gpt1: timer@202000 { compatible = "fsl,imx1-gpt"; reg = <0x00202000 0x1000>; interrupts = <59>; @@ -85,7 +85,7 @@ clock-names = "ipg", "per"; }; - gpt2: timer@00203000 { + gpt2: timer@203000 { compatible = "fsl,imx1-gpt"; reg = <0x00203000 0x1000>; interrupts = <58>; @@ -94,7 +94,7 @@ clock-names = "ipg", "per"; }; - fb: fb@00205000 { + fb: fb@205000 { compatible = "fsl,imx1-fb"; reg = <0x00205000 0x1000>; interrupts = <14>; @@ -105,7 +105,7 @@ status = "disabled"; }; - uart1: serial@00206000 { + uart1: serial@206000 { compatible = "fsl,imx1-uart"; reg = <0x00206000 0x1000>; interrupts = <30 29 26>; @@ -115,7 +115,7 @@ status = "disabled"; }; - uart2: serial@00207000 { + uart2: serial@207000 { compatible = "fsl,imx1-uart"; reg = <0x00207000 0x1000>; interrupts = <24 23 20>; @@ -125,7 +125,7 @@ status = "disabled"; }; - pwm: pwm@00208000 { + pwm: pwm@208000 { #pwm-cells = <2>; compatible = "fsl,imx1-pwm"; reg = <0x00208000 0x1000>; @@ -135,7 +135,7 @@ clock-names = "ipg", "per"; }; - dma: dma@00209000 { + dma: dma@209000 { compatible = "fsl,imx1-dma"; reg = <0x00209000 0x1000>; interrupts = <61 60>; @@ -145,7 +145,7 @@ #dma-cells = <1>; }; - uart3: serial@0020a000 { + uart3: serial@20a000 { compatible = "fsl,imx1-uart"; reg = <0x0020a000 0x1000>; interrupts = <54 4 1>; @@ -156,14 +156,14 @@ }; }; - aipi@00210000 { + aipi@210000 { compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x00210000 0x10000>; ranges; - cspi1: cspi@00213000 { + cspi1: cspi@213000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx1-cspi"; @@ -175,7 +175,7 @@ status = "disabled"; }; - i2c: i2c@00217000 { + i2c: i2c@217000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx1-i2c"; @@ -185,7 +185,7 @@ status = "disabled"; }; - cspi2: cspi@00219000 { + cspi2: cspi@219000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx1-cspi"; @@ -197,20 +197,20 @@ status = "disabled"; }; - clks: ccm@0021b000 { + clks: ccm@21b000 { compatible = "fsl,imx1-ccm"; reg = <0x0021b000 0x1000>; #clock-cells = <1>; }; - iomuxc: iomuxc@0021c000 { + iomuxc: iomuxc@21c000 { compatible = "fsl,imx1-iomuxc"; reg = <0x0021c000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges; - gpio1: gpio@0021c000 { + gpio1: gpio@21c000 { compatible = "fsl,imx1-gpio"; reg = <0x0021c000 0x100>; interrupts = <11>; @@ -220,7 +220,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio@0021c100 { + gpio2: gpio@21c100 { compatible = "fsl,imx1-gpio"; reg = <0x0021c100 0x100>; interrupts = <12>; @@ -230,7 +230,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio@0021c200 { + gpio3: gpio@21c200 { compatible = "fsl,imx1-gpio"; reg = <0x0021c200 0x100>; interrupts = <13>; @@ -240,7 +240,7 @@ #interrupt-cells = <2>; }; - gpio4: gpio@0021c300 { + gpio4: gpio@21c300 { compatible = "fsl,imx1-gpio"; reg = <0x0021c300 0x100>; interrupts = <62>; @@ -252,7 +252,7 @@ }; }; - weim: weim@00220000 { + weim: weim@220000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,imx1-weim"; @@ -269,7 +269,7 @@ status = "disabled"; }; - esram: esram@00300000 { + esram: esram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x20000>; }; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index db39bd6b8e0062ae1cae8b97b743a7ebc577f759..0f053721d80f20790ecf189c766621bdfda19d64 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -64,7 +64,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio1 20>; + cd-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index c52692821fb14beb23408e2297288fd77b751a44..2d15ce72d006a63b4ee2be4ef65c72c0e0861f15 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -135,7 +135,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks 129>; @@ -295,6 +295,14 @@ status = "okay"; }; +&tsc { + status = "okay"; +}; + +&tscadc { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index d2a91976e67f69ad5aed3307ac08d8e3295fff03..ae078341fb6038561776218e99eda5d66974e40f 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -143,7 +143,7 @@ pinctrl-0 = <&i2c0_pins_a>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi index 581e85f4fd4c11ffb05eb5c73b75f1fa6a7ba96b..49ab40838e694d15bd821aa410a813c5553384c6 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi @@ -148,7 +148,7 @@ pinctrl-0 = <&i2c0_pins_a>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 5309bb90d7d586cbadfc6b61777761595b5d35c8..7f5b80402c545bacf6ea6903e2fae96a591ec27f 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -194,7 +194,7 @@ pinctrl-0 = <&i2c0_pins_a>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index dbfb8aab505f76e986e301aab30632b7df43a20a..22aa025cab1ecda2caf6c892fb4c9d2e5332a180 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -137,7 +137,7 @@ }; i2c0: i2c@80058000 { - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 0ebbc83852d026fbdd9684424b62a7a9d10720ea..152621ea37db840c35231c440df434e8156eda63 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -1,13 +1,43 @@ /* * Copyright 2012 Shawn Guo - * Copyright 2013 Lothar Waßmann + * Copyright 2013-2017 Lothar Waßmann * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -45,82 +75,69 @@ status = "disabled"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb0_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb0_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usb1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_2p5v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; - reg_3p3v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_can_xcvr: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "CAN XCVR"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&tx28_flexcan_xcvr_pins>; - }; + reg_can_xcvr: regulator-can-xcvr { + compatible = "regulator-fixed"; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_flexcan_xcvr_pins>; + }; - reg_lcd: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "LCD POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_lcd: regulator-lcd-power { + compatible = "regulator-fixed"; + regulator-name = "LCD POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_lcd_reset: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "LCD RESET"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; - startup-delay-us = <300000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - }; + reg_lcd_reset: regulator-lcd-reset { + compatible = "regulator-fixed"; + regulator-name = "LCD RESET"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; }; clocks { @@ -298,7 +315,7 @@ clock-frequency = <400000>; status = "okay"; - sgtl5000: sgtl5000@0a { + sgtl5000: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_2p5v>; @@ -312,7 +329,7 @@ pinctrl-names = "default"; pinctrl-0 = <&tx28_pca9554_pins>; interrupt-parent = <&gpio3>; - interrupts = <28 0>; + interrupts = <28 IRQ_TYPE_NONE>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -336,7 +353,7 @@ pinctrl-names = "default"; pinctrl-0 = <&tx28_tsc2007_pins>; interrupt-parent = <&gpio3>; - interrupts = <20 0>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = /bits/ 16 <660>; }; @@ -344,6 +361,8 @@ ds1339: rtc@68 { compatible = "mxim,ds1339"; reg = <0x68>; + trickle-resistor-ohms = <250>; + trickle-diode-disable; }; }; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index e9357131b026e33140d3928cd284ef976d0278be..ae98d67590747adf8eae32a57cc018e73c4bfdd6 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -65,7 +65,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio3 24>; + cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 3747d80104f4530226638a9051e18ba14f457701..35955e63d6c56d1781e6b41548df09a040067039 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -52,7 +52,7 @@ }; }; - tzic: tz-interrupt-controller@0fffc000 { + tzic: tz-interrupt-controller@fffc000 { compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic"; interrupt-controller; #interrupt-cells = <1>; @@ -443,6 +443,7 @@ clocks = <&clks IMX5_CLK_SDMA_GATE>, <&clks IMX5_CLK_SDMA_GATE>; clock-names = "ipg", "ahb"; + #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin"; }; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index a5e6091c8729968beef3bd4279c325a3212a5ca8..3e1846a64d937f13e5a161cb80be3f43cab31052 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -16,7 +16,7 @@ model = "Armadeus Systems APF51Dev docking/development board"; compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51"; - backlight@bl1{ + backlight { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_backlight>; compatible = "gpio-backlight"; @@ -24,7 +24,7 @@ default-on; }; - display@di1 { + disp1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "bgr666"; pinctrl-names = "default"; @@ -51,7 +51,7 @@ port { display_in: endpoint { - remote-endpoint = <&ipu_di0_disp0>; + remote-endpoint = <&ipu_di0_disp1>; }; }; }; @@ -120,7 +120,7 @@ pinctrl-0 = <&pinctrl_hog>; imx51-apf51dev { - pinctrl_backlight: bl1grp { + pinctrl_backlight: backlightgrp { fsl,pins = < MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5 >; @@ -218,6 +218,6 @@ }; }; -&ipu_di0_disp0 { +&ipu_di0_disp1 { remote-endpoint = <&display_in>; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 873cf242679c0d1cbc9a84938105abfada2c9610..2a694c5cc8aebcfa2813305d02a357d4ddd7fb63 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -39,7 +39,7 @@ }; }; - display0: display@di0 { + display1: disp1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; @@ -61,12 +61,12 @@ port { display0_in: endpoint { - remote-endpoint = <&ipu_di0_disp0>; + remote-endpoint = <&ipu_di0_disp1>; }; }; }; - display1: display@di1 { + display2: disp2 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb565"; pinctrl-names = "default"; @@ -93,7 +93,7 @@ port { display1_in: endpoint { - remote-endpoint = <&ipu_di1_disp1>; + remote-endpoint = <&ipu_di1_disp2>; }; }; }; @@ -337,7 +337,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_clkcodec>; @@ -348,11 +348,11 @@ }; }; -&ipu_di0_disp0 { +&ipu_di0_disp1 { remote-endpoint = <&display0_in>; }; -&ipu_di1_disp1 { +&ipu_di1_disp2 { remote-endpoint = <&display1_in>; }; diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index ca1cc5eca80fb1cd6a0b32b85fdee9374f2792b3..564233e974129eb6433a11e1086d86676c6ca5d4 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -50,7 +50,7 @@ power-supply = <&backlight_reg>; }; - display0: display@di0 { + display1: disp1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; @@ -71,9 +71,9 @@ }; }; - port@0 { + port { display0_in: endpoint { - remote-endpoint = <&ipu_di0_disp0>; + remote-endpoint = <&ipu_di0_disp1>; }; }; }; @@ -107,7 +107,7 @@ }; }; -&ipu_di0_disp0 { +&ipu_di0_disp1 { remote-endpoint = <&display0_in>; }; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts new file mode 100644 index 0000000000000000000000000000000000000000..49be0e1c812d21628920931f2c69579d37828908 --- /dev/null +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -0,0 +1,834 @@ +/* + * Copyright (C) 2017 Zodiac Inflight Innovations + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx51.dtsi" +#include + +/ { + model = "ZII RDU1 Board"; + compatible = "zii,imx51-rdu1", "fsl,imx51"; + + chosen { + stdout-path = &uart1; + }; + + aliases { + mdio-gpio0 = &mdio_gpio; + rtc0 = &ds1341; + }; + + clk_26M_osc: 26M_osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clk_26M_osc_gate: 26M_gate { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_clk26mhz>; + clocks = <&clk_26M_osc>; + #clock-cells = <0>; + enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + + clk_26M_usb: usbhost_gate { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbgate26mhz>; + clocks = <&clk_26M_osc_gate>; + #clock-cells = <0>; + enable-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + }; + + clk_26M_snd: snd_gate { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sndgate26mhz>; + clocks = <&clk_26M_osc_gate>; + #clock-cells = <0>; + enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + }; + + reg_5p0v_main: regulator-5p0v-main { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + disp0 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1>; + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + display_in: endpoint { + remote-endpoint = <&ipu_di0_disp1>; + }; + }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel { + /* no compatible here, bootloader will patch in correct one */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel>; + power-supply = <®_3p3v>; + enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + + i2c_gpio: i2c-gpio { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_swi2c>; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */ + <&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */ + i2c-gpio,delay-us = <50>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clk_26M_snd>; + VDDA-supply = <&vdig_reg>; + VDDIO-supply = <&vvideo_reg>; + #sound-dai-cells = <0>; + }; + }; + + spi_gpio: spi-gpio { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiospi0>; + status = "okay"; + + gpio-sck = <&gpio4 15 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio4 12 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio4 11 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + cs-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; + + eeprom@0 { + compatible = "eeprom-93xx46"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cs-high; + data-size = <8>; + }; + }; + + mdio_gpio: mdio-gpio { + compatible = "virtual,mdio-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_swmdio>; + gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>, /* mdc */ + <&gpio3 25 GPIO_ACTIVE_HIGH>; /* mdio */ + + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "netaux"; + }; + + port@3 { + reg = <3>; + label = "netright"; + }; + + port@4 { + reg = <4>; + label = "netleft"; + }; + }; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "RDU1 audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT"; + simple-audio-card,aux-devs = <&tpa6130a2>; + + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + + sound_codec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + clocks = <&clk_26M_snd>; + }; + }; + + usbh1phy: usbphy1 { + compatible = "usb-nop-xceiv"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1phy>; + clocks = <&clk_26M_usb>; + clock-names = "main_clk"; + reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + vcc-supply = <&vusb_reg>; + }; + + usbh2phy: usbphy2 { + compatible = "usb-nop-xceiv"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2phy>; + clocks = <&clk_26M_usb>; + clock-names = "main_clk"; + reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + vcc-supply = <&vusb_reg>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(2) | + IMX_AUDMUX_V2_PTCR_TCSEL(2) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + aud3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(1) + >; + }; +}; + +&cpu { + cpu-supply = <&sw1_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, + <&gpio4 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + spi-max-frequency = <6000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led-control = <0x0 0x0 0x3f83f8 0x0>; + + sysled0 { + reg = <3>; + label = "system:green:status"; + linux,default-trigger = "default-on"; + }; + + sysled1 { + reg = <4>; + label = "system:green:act"; + linux,default-trigger = "heartbeat"; + }; + }; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db642d", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + phy-supply = <&vgen3_reg>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + + tpa6130a2: amp@60 { + compatible = "ti,tpa6130a2"; + reg = <0x60>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ampgpio>; + power-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_3p3v>; + }; + + ds1341: rtc@68 { + compatible = "maxim,ds1341"; + reg = <0x68>; + }; + + /* touch nodes default disabled, bootloader will enable the right one */ + + touchscreen@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + interrupt-parent = <&gpio3>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + status = "disabled"; + }; + + touchscreen@4c { + compatible = "atmel,maxtouch"; + reg = <0x4c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + interrupt-parent = <&gpio3>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + status = "disabled"; + }; + + touchscreen@20 { + compatible = "syna,rmi4_i2c"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + interrupt-parent = <&gpio3>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <2>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touch-inverted-y; + touch-swapped-x-y; + syna,sensor-type = <1>; + }; + }; + +}; + +&ipu_di0_disp1 { + remote-endpoint = <&display_in>; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + dr_mode = "host"; + phy_type = "ulpi"; + fsl,usbphy = <&usbh1phy>; + disable-over-current; + vbus-supply = <®_5p0v_main>; + status = "okay"; +}; + +&usbh2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2>; + dr_mode = "host"; + phy_type = "ulpi"; + fsl,usbphy = <&usbh2phy>; + disable-over-current; + vbus-supply = <®_5p0v_main>; + status = "okay"; +}; + +&usbphy0 { + vcc-supply = <&vusb_reg>; +}; + +&usbotg { + dr_mode = "host"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <®_5p0v_main>; + status = "okay"; +}; + +&iomuxc { + pinctrl_ampgpio: ampgpiogrp { + fsl,pins = < + MX51_PAD_GPIO1_9__GPIO1_9 0x5e + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0xa5 + MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x85 + MX51_PAD_AUD3_BB_CK__AUD3_TXC 0xa5 + MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x85 + >; + }; + + pinctrl_clk26mhz: clk26mhzgrp { + fsl,pins = < + MX51_PAD_DI1_PIN12__GPIO3_1 0x85 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_EIM_EB2__FEC_MDIO 0x1f5 + MX51_PAD_NANDF_D9__FEC_RDATA0 0x2180 + MX51_PAD_EIM_EB3__FEC_RDATA1 0x180 + MX51_PAD_EIM_CS2__FEC_RDATA2 0x180 + MX51_PAD_EIM_CS3__FEC_RDATA3 0x180 + MX51_PAD_EIM_CS4__FEC_RX_ER 0x180 + MX51_PAD_NANDF_D11__FEC_RX_DV 0x2084 + MX51_PAD_EIM_CS5__FEC_CRS 0x180 + MX51_PAD_NANDF_RB2__FEC_COL 0x2180 + MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x2180 + MX51_PAD_NANDF_CS2__FEC_TX_ER 0x2004 + MX51_PAD_NANDF_CS3__FEC_MDC 0x2004 + MX51_PAD_NANDF_D8__FEC_TDATA0 0x2180 + MX51_PAD_NANDF_CS4__FEC_TDATA1 0x2004 + MX51_PAD_NANDF_CS5__FEC_TDATA2 0x2004 + MX51_PAD_NANDF_CS6__FEC_TDATA3 0x2004 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x2004 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x2180 + MX51_PAD_EIM_A20__GPIO2_14 0x85 + >; + }; + + pinctrl_gpiospi0: gpiospi0grp { + fsl,pins = < + MX51_PAD_CSI2_D18__GPIO4_11 0x85 + MX51_PAD_CSI2_D19__GPIO4_12 0x85 + MX51_PAD_CSI2_HSYNC__GPIO4_14 0x85 + MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x85 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_ipu_disp1: ipudisp1grp { + fsl,pins = < + MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 + MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 + MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 + MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 + MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 + MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 + MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 + MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 + MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 + MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 + MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 + MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 + MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 + MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 + MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 + MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 + MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 + MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 + MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 + MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 + MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 + MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 + MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 + MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 + MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 + MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 + MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 + >; + }; + + pinctrl_panel: panelgrp { + fsl,pins = < + MX51_PAD_DI1_D0_CS__GPIO3_3 0x85 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_4__GPIO1_4 0x1e0 + MX51_PAD_GPIO1_8__GPIO1_8 0x21e2 + >; + }; + + pinctrl_sndgate26mhz: sndgate26mhzgrp { + fsl,pins = < + MX51_PAD_CSPI1_RDY__GPIO4_26 0x85 + >; + }; + + pinctrl_swi2c: swi2cgrp { + fsl,pins = < + MX51_PAD_GPIO1_2__GPIO1_2 0xc5 + MX51_PAD_DI1_D1_CS__GPIO3_4 0x400001f5 + >; + }; + + pinctrl_swmdio: swmdiogrp { + fsl,pins = < + MX51_PAD_NANDF_D14__GPIO3_26 0x21e6 + MX51_PAD_NANDF_D15__GPIO3_25 0x21e6 + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX51_PAD_CSI1_D8__GPIO3_12 0x85 + MX51_PAD_CSI1_D9__GPIO3_13 0x85 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + MX51_PAD_UART1_RTS__UART1_RTS 0x1c4 + MX51_PAD_UART1_CTS__UART1_CTS 0x1c4 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0xc5 + MX51_PAD_UART2_TXD__UART2_TXD 0xc5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_EIM_D25__UART3_RXD 0x1c5 + MX51_PAD_EIM_D26__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usbgate26mhz: usbgate26mhzgrp { + fsl,pins = < + MX51_PAD_DISP2_DAT6__GPIO1_19 0x85 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_STP__USBH1_STP 0x0 + MX51_PAD_USBH1_CLK__USBH1_CLK 0x0 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x0 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x0 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x0 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x0 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x0 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x0 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x0 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x0 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x0 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x0 + >; + }; + + pinctrl_usbh1phy: usbh1phygrp { + fsl,pins = < + MX51_PAD_NANDF_D0__GPIO4_8 0x85 + >; + }; + + pinctrl_usbh2: usbh2grp { + fsl,pins = < + MX51_PAD_EIM_A26__USBH2_STP 0x0 + MX51_PAD_EIM_A24__USBH2_CLK 0x0 + MX51_PAD_EIM_A25__USBH2_DIR 0x0 + MX51_PAD_EIM_A27__USBH2_NXT 0x0 + MX51_PAD_EIM_D16__USBH2_DATA0 0x0 + MX51_PAD_EIM_D17__USBH2_DATA1 0x0 + MX51_PAD_EIM_D18__USBH2_DATA2 0x0 + MX51_PAD_EIM_D19__USBH2_DATA3 0x0 + MX51_PAD_EIM_D20__USBH2_DATA4 0x0 + MX51_PAD_EIM_D21__USBH2_DATA5 0x0 + MX51_PAD_EIM_D22__USBH2_DATA6 0x0 + MX51_PAD_EIM_D23__USBH2_DATA7 0x0 + >; + }; + + pinctrl_usbh2phy: usbh2phygrp { + fsl,pins = < + MX51_PAD_NANDF_D1__GPIO4_7 0x85 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 1ee1d542d9ad088c0bb94a55d66829d6ac1d92b9..378be720b3c7679992c9901ab710da85ae584b7d 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -148,14 +148,14 @@ ipu_di0: port@2 { reg = <2>; - ipu_di0_disp0: endpoint { + ipu_di0_disp1: endpoint { }; }; ipu_di1: port@3 { reg = <3>; - ipu_di1_disp1: endpoint { + ipu_di1_disp2: endpoint { }; }; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index 4347a321c78216087e0cfbf79563af73dc3b7577..e48525763b1b90d2d3e80c3c329a3740cb71041e 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -16,7 +16,7 @@ model = "Aries/DENX M53EVK"; compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53"; - display1: display@di1 { + display1: disp1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "bgr666"; pinctrl-names = "default"; @@ -150,7 +150,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p2v>; @@ -183,7 +183,7 @@ >; }; - led_pin_gpio: led_gpio@0 { + led_pin_gpio: led_gpio { fsl,pins = < MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000 MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000 diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index df705ba48897f87bad941c11dd693150867f9df4..296dd74fc24685d323e026cc8136d8e743a40237 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -30,7 +30,7 @@ power-supply = <®_backlight>; }; - disp1: display@disp1 { + disp1: disp1 { compatible = "fsl,imx-parallel-display"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_disp1_1>; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts new file mode 100644 index 0000000000000000000000000000000000000000..cce959438a79679e634ac8c191fedd85afcbfdca --- /dev/null +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -0,0 +1,1042 @@ +/* + * Copyright 2014 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx53.dtsi" +#include + +/ { + model = "General Electric CS ONE"; + compatible = "ge,imx53-cpuvo", "fsl,imx53"; + + aliases { + spi0 = &cspi; + spi1 = &ecspi1; + spi2 = &ecspi2; + }; + + chosen { + stdout-path = "&uart1:115200n8"; + }; + + memory@70000000 { + device_type = "memory"; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; + }; + + cko2_11M: sgtl-clock-cko2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + sgtlsound: sound { + compatible = "fsl,imx53-cpuvo-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx53-cpuvo-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <2>; + mux-ext-port = <6>; + }; + + reg_sgtl5k: regulator-sgtl5k { + compatible = "regulator-fixed"; + regulator-name = "regulator-sgtl5k"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-0 = <&pinctrl_usb_otg_vbus>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usbh2_vbus: regulator-usbh2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2_vbus>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbh3_vbus: regulator-usbh3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh3_vbus>; + gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + pwm_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 50000>; + brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35 + 38 40 43 45 48 51 53 56 58 61 63 66 68 71 + 73 76 79 81 84 86 89 91 94 96 99 102 104 + 107 109 112 114 117 119 122 124 127 130 + 132 135 137 140 142 145 147 150 153 155 + 158 160 163 165 168 170 173 175 178 181 + 183 186 188 191 193 196 198 201 204 206 + 209 211 214 216 219 221 224 226 229 232 + 234 237 239 242 244 247 249 252 255>; + default-brightness-level = <0>; + enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "pwm-leds"; + + alarm-brightness { + pwms = <&pwm1 0 100000>; + max-brightness = <255>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; + active-delay = <100>; + inactive-delay = <10>; + wait-delay = <100>; + }; + + power-gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + power-button { + label = "Power button"; + gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; + + touch-lock-key { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + touch-lock-button { + label = "Touch lock button"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + usbphy2: usbphy2 { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; + clock-names = "main_clk"; + clock-frequency = <24000000>; + clocks = <&clks IMX5_CLK_CKO2>; + assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; + assigned-clock-parents = <&clks IMX5_CLK_OSC>; + }; + + usbphy3: usbphy3 { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; + clock-names = "main_clk"; + + clock-frequency = <24000000>; + clocks = <&clks IMX5_CLK_CKO2>; + assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; + assigned-clock-parents = <&clks IMX5_CLK_OSC>; + }; + + panel-lvds0 { + compatible = "nvd,9128"; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&cpu0 { + /* CPU rated to 1GHz, not 1.2GHz as per the default settings */ + operating-points = < + /* kHz uV */ + 166666 850000 + 400000 900000 + 800000 1050000 + 1000000 1200000 + >; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW + &gpio4 10 GPIO_ACTIVE_LOW + &gpio4 11 GPIO_ACTIVE_LOW + &gpio4 12 GPIO_ACTIVE_LOW>; + status = "okay"; + + spidev0: spi@0 { + compatible = "ge,achc"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + + spidev1: spi@1 { + compatible = "ge,achc"; + reg = <1>; + spi-max-frequency = <1000000>; + }; + + gpioxra0: gpio@2 { + compatible = "exar,xra1403"; + reg = <2>; + gpio-controller; + #gpio-cells = <2>; + spi-max-frequency = <1000000>; + }; + + gpioxra1: gpio@3 { + compatible = "exar,xra1403"; + reg = <3>; + gpio-controller; + #gpio-cells = <2>; + spi-max-frequency = <1000000>; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-chipselects = <1>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; + status = "okay"; + + da9053@0 { + compatible = "dlg,da9053-aa"; + reg = <0>; + interrupt-parent = <&gpio3>; + interrupts = <12 0x8>; + spi-max-frequency = <1000000>; + + regulators { + buck1_reg: buck1 { + regulator-name = "BUCKCORE"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "BUCKPRO"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "BUCKMEM"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + buck4_reg: buck4 { + regulator-name = "BUCKPERI"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "ldo1_1v3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "ldo2_1v3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "ldo3_3v3"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "ldo4_2v775"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-name = "ldo5_3v3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-name = "ldo6_1v3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-name = "ldo7_2v75"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-name = "ldo8_1v8"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo9_reg: ldo9 { + regulator-name = "ldo9_1v5"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3650000>; + regulator-always-on; + }; + + ldo10_reg: ldo10 { + regulator-name = "ldo10_1v3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + }; + }; + +}; + +&esdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3>; + bus-width = <8>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9547"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; + + i2c4: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_sgtl5k>; + VDDIO-supply = <®_sgtl5k>; + clocks = <&cko2_11M>; + status = "okay"; + }; + }; + + i2c5: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + rtc@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; + + temp@48 { + compatible = "ti,tmp112"; + reg = <0x48>; + }; + + mma8453q: accelerometer@1c { + compatible = "fsl,mma8453"; + reg = <0x1c>; + interrupt-parent = <&gpio1>; + interrupts = <6 0>; + interrupt-names = "INT1"; + }; + + mpl3115: pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; + }; + + i2c6: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c7: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c8: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c9: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c10: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c11: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + status = "okay"; + + touchscreen@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpio5>; + interrupts = <4 0x8>; + }; +}; + +&i2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + status = "okay"; + + port@2 { + reg = <2>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + phy_type = "utmi"; + vbus-supply = <®_usb_otg_vbus>; + pinctrl-0 = <&pinctrl_usb_otg>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_vbus>; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usbh2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2>; + phy_type = "ulpi"; + dr_mode = "host"; + fsl,usbphy = <&usbphy2>; + vbus-supply = <®_usbh2_vbus>; + status = "okay"; +}; + +&usbh3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh3>; + phy_type = "ulpi"; + dr_mode = "host"; + vbus-supply = <®_usbh3_vbus>; + fsl,usbphy = <&usbphy3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_rev6>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 0x400 + MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 0x400 + MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 0x400 + MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 0x400 + MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 0x400 + MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 0x400 + MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 0x400 + MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 0x400 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX53_PAD_DISP0_DAT21__ECSPI1_MOSI 0x400 + MX53_PAD_DISP0_DAT22__ECSPI1_MISO 0x400 + MX53_PAD_DISP0_DAT20__ECSPI1_SCLK 0x400 + /* ECSPI1_SS0, must treat as GPIO for EzPort */ + MX53_PAD_DISP0_DAT23__GPIO5_17 0x400 + MX53_PAD_KEY_COL2__GPIO4_10 0x0 + MX53_PAD_KEY_ROW2__GPIO4_11 0x0 + MX53_PAD_KEY_COL3__GPIO4_12 0x0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x0 + MX53_PAD_EIM_OE__ECSPI2_MISO 0x0 + MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x0 + MX53_PAD_EIM_RW__GPIO2_26 0x0 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + >; + }; + + pinctrl_esdhc3: esdhc3grp { + fsl,pins = < + MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 + MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 + MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 + MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 + MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 + MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 + MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 + MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 + MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 + MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x0 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x0 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x0 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x0 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x0 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x0 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x0 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x0 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x0 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x0 + >; + }; + + pinctrl_hog_rev6: hoggrp { + fsl,pins = < + /* CKO2 */ + MX53_PAD_GPIO_3__CCM_CLKO2 0x4 + /* DEFIB_SYNC_MARKER_IN_IRQ */ + MX53_PAD_GPIO_5__GPIO1_5 0x0 + /* ACCELEROMETER_DATA_RDY_N */ + MX53_PAD_GPIO_6__GPIO1_6 0x0 + /* TEMPERATURE_ALERT_N */ + MX53_PAD_GPIO_7__GPIO1_7 0x0 + /* BAROMETRIC_PRESSURE_DATA_RDY_N */ + MX53_PAD_GPIO_8__GPIO1_8 0x0 + /* DOCKING_I2C_INTERFACE_IRQ_N */ + MX53_PAD_PATA_DATA4__GPIO2_4 0x0 + /* PWR_OUT_TO_DOCK_FAULT_N */ + MX53_PAD_PATA_DATA5__GPIO2_5 0x0 + /* ENABLE_PWR_TO_DOCK_N */ + MX53_PAD_PATA_DATA6__GPIO2_6 0x0 + /* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */ + MX53_PAD_PATA_DATA7__GPIO2_7 0x0 + /* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */ + MX53_PAD_PATA_DATA12__GPIO2_12 0x0 + /* DOCK_PRESENT_N */ + MX53_PAD_PATA_DATA13__GPIO2_13 0x0 + /* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */ + MX53_PAD_PATA_DATA14__GPIO2_14 0x0 + /* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */ + MX53_PAD_PATA_DATA15__GPIO2_15 0x0 + /* RESET_IMX535_ETHERNET_PHY_N */ + MX53_PAD_EIM_A22__GPIO2_16 0x0 + /* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */ + MX53_PAD_EIM_A21__GPIO2_17 0x0 + /* RESET_I2C1_BUS_SEGMENT_MUX_N */ + MX53_PAD_EIM_A20__GPIO2_18 0x0 + /* RESET_IMX535_USB_HOST3_PHY_N */ + MX53_PAD_EIM_A19__GPIO2_19 0x0 + /* ESDHC3_EMMC_NAND_RST_N */ + MX53_PAD_EIM_A18__GPIO2_20 0x0 + /* LCD_AND_UI_INTERFACE_PWR_FAULT_N */ + MX53_PAD_EIM_A17__GPIO2_21 0x0 + /* POWER_DOWN_LVDS0_DESERIALIZER_N */ + MX53_PAD_EIM_A16__GPIO2_22 0x0 + /* POWER_DOWN_LVDS1_DESERIALIZER_N */ + MX53_PAD_EIM_LBA__GPIO2_27 0x0 + /* RESET_DP0_TRANSMITTER_N */ + MX53_PAD_EIM_EB0__GPIO2_28 0x0 + /* RESET_DP1_TRANSMITTER_N */ + MX53_PAD_EIM_EB1__GPIO2_29 0x0 + /* ENABLE_SPDIF_AUDIO_TO_DP0 */ + MX53_PAD_EIM_DA0__GPIO3_0 0x0 + /* ENABLE_SPDIF_AUDIO_TO_DP1 */ + MX53_PAD_EIM_DA1__GPIO3_1 0x0 + /* LVDS1_MUX_CTRL */ + MX53_PAD_EIM_DA2__GPIO3_2 0x0 + /* LVDS0_MUX_CTRL */ + MX53_PAD_EIM_DA3__GPIO3_3 0x0 + /* DP1_TRANSMITTER_IRQ */ + MX53_PAD_EIM_DA4__GPIO3_4 0x0 + /* DP0_TRANSMITTER_IRQ */ + MX53_PAD_EIM_DA5__GPIO3_5 0x0 + /* USB_RESET_N */ + MX53_PAD_EIM_DA6__GPIO3_6 0x0 + /* ENABLE_BATTERY_CHARGER */ + MX53_PAD_EIM_DA7__GPIO3_7 0x0 + /* SOFTWARE_CONTROLLED_PWR_CYCLE */ + MX53_PAD_EIM_DA8__GPIO3_8 0x0 + /* SOFTWARE_CONTROLLED_POWERDOWN */ + MX53_PAD_EIM_DA9__GPIO3_9 0x0 + /* DC_PWR_IN_OK */ + MX53_PAD_EIM_DA10__GPIO3_10 0x0 + /* BATT_PRESENT_N */ + MX53_PAD_EIM_DA11__GPIO3_11 0xe4 + /* PMIC_IRQ_N */ + MX53_PAD_EIM_DA12__GPIO3_12 0x0 + /* PMIC_VDD_FAULT_STATUS_N */ + MX53_PAD_EIM_DA13__GPIO3_13 0x0 + /* IMX535_ETHERNET_PHY_STATUS_IRQ_N */ + MX53_PAD_EIM_DA14__GPIO3_14 0x0 + /* NOT USED - AVAILABLE 3.3V GPIO */ + MX53_PAD_EIM_DA15__GPIO3_15 0x0 + /* NOT USED - AVAILABLE 3.3V GPIO */ + MX53_PAD_EIM_D22__GPIO3_22 0x0 + /* NOT USED - AVAILABLE 3.3V GPIO */ + MX53_PAD_EIM_D24__GPIO3_24 0x0 + /* NBP_PUMP_VALVE_PWR_ENABLE */ + MX53_PAD_EIM_D25__GPIO3_25 0x0 + /* NIBP_RESET_N */ + MX53_PAD_EIM_D26__GPIO3_26 0x0 + /* LATCHED_OVERPRESSURE_N */ + MX53_PAD_EIM_D27__GPIO3_27 0x0 + /* NBP_SBWTCLK */ + MX53_PAD_EIM_D29__GPIO3_29 0x0 + /* ENABLE_WIFI_MODULE */ + MX53_PAD_GPIO_11__GPIO4_1 0x400 + /* WIFI_MODULE_IRQ_N */ + MX53_PAD_GPIO_12__GPIO4_2 0x400 + /* ENABLE_BLUETOOTH_MODULE */ + MX53_PAD_GPIO_13__GPIO4_3 0x400 + /* RESET_IMX535_USB_HOST2_PHY_N */ + MX53_PAD_GPIO_14__GPIO4_4 0x400 + /* ONKEY_IS_DEPRESSED */ + MX53_PAD_KEY_ROW3__GPIO4_13 0x0 + /* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */ + MX53_PAD_EIM_WAIT__GPIO5_0 0x0 + /* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */ + MX53_PAD_EIM_A25__GPIO5_2 0x0 + /* I2C_PCAP_TOUCHSCREEN_IRQ_N */ + MX53_PAD_EIM_A24__GPIO5_4 0x0 + /* NOT USED - AVAILABLE 1.8V GPIO */ + MX53_PAD_DISP0_DAT13__GPIO5_7 0x400 + /* NOT USED - AVAILABLE 1.8V GPIO */ + MX53_PAD_DISP0_DAT14__GPIO5_8 0x400 + /* NOT USED - AVAILABLE 1.8V GPIO */ + MX53_PAD_DISP0_DAT15__GPIO5_9 0x400 + /* HOST_CONTROLLED_RESET_TO_LCD_N */ + MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x0 + /* HOST_CONTROLLED_RESET_TO_PCAP_N */ + MX53_PAD_CSI0_MCLK__GPIO5_19 0x0 + /* LR_SCAN_CTRL */ + MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x0 + /* UD_SCAN_CTRL */ + MX53_PAD_CSI0_VSYNC__GPIO5_21 0x0 + /* DATA_WIDTH_CTRL */ + MX53_PAD_CSI0_DAT10__GPIO5_28 0x0 + /* BACKLIGHT_ENABLE */ + MX53_PAD_CSI0_DAT11__GPIO5_29 0x0 + /* MED_USB_PORT_1_HOST_SELECT */ + MX53_PAD_EIM_A23__GPIO6_6 0x0 + /* MED_USB_PORT_2_HOST_SELECT */ + MX53_PAD_NANDF_CLE__GPIO6_7 0x0 + /* MED_USB_PORT_3_HOST_SELECT */ + MX53_PAD_NANDF_ALE__GPIO6_8 0x0 + /* MED_USB_PORT_4_HOST_SELECT */ + MX53_PAD_NANDF_WP_B__GPIO6_9 0x0 + /* MED_USB_PORT_5_HOST_SELECT */ + MX53_PAD_NANDF_RB0__GPIO6_10 0x0 + /* MED_USB_PORT_6_HOST_SELECT */ + MX53_PAD_NANDF_CS0__GPIO6_11 0x0 + /* MED_USB_PORT_7_HOST_SELECT */ + MX53_PAD_NANDF_WE_B__GPIO6_12 0x0 + /* MED_USB_PORT_8_HOST_SELECT */ + MX53_PAD_NANDF_RE_B__GPIO6_13 0x0 + /* MED_USB_PORT_TO_IMX_SELECT_0 */ + MX53_PAD_NANDF_CS1__GPIO6_14 0x0 + /* MED_USB_PORT_TO_IMX_SELECT_1 */ + MX53_PAD_NANDF_CS2__GPIO6_15 0x0 + /* MED_USB_PORT_TO_IMX_SELECT_2 */ + MX53_PAD_NANDF_CS3__GPIO6_16 0x0 + /* POWER_AND_BOOT_STATUS_INDICATOR */ + MX53_PAD_PATA_INTRQ__GPIO7_2 0x1e4 + /* ACTIVATE_ALARM_LIGHT_RED */ + MX53_PAD_PATA_DIOR__GPIO7_3 0x0 + /* ACTIVATE_ALARM_LIGHT_YELLOW */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x0 + /* ACTIVATE_ALARM_LIGHT_CYAN */ + MX53_PAD_PATA_DA_2__GPIO7_8 0x0 + /* RUNNING_ON_BATTERY_INDICATOR_GREEN */ + MX53_PAD_GPIO_16__GPIO7_11 0x0 + /* BATTERY_STATUS_INDICATOR_AMBER */ + MX53_PAD_GPIO_17__GPIO7_12 0x0 + /* AUDIO_ALARMS_SILENCED_INDICATOR */ + MX53_PAD_GPIO_18__GPIO7_13 0x0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 + MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX53_PAD_EIM_D28__GPIO3_28 0x1e4 + MX53_PAD_EIM_D21__GPIO3_21 0x1e4 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX53_PAD_EIM_EB2__I2C2_SCL 0x400001e4 + MX53_PAD_EIM_D16__I2C2_SDA 0x400001e4 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX53_PAD_EIM_D16__GPIO3_16 0x1e4 + MX53_PAD_EIM_EB2__GPIO2_30 0x1e4 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX53_PAD_EIM_D17__I2C3_SCL 0x400001e4 + MX53_PAD_EIM_D18__I2C3_SDA 0x400001e4 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX53_PAD_EIM_D18__GPIO3_18 0x1e4 + MX53_PAD_EIM_D17__GPIO3_17 0x1e4 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX53_PAD_GPIO_9__PWM1_PWMO 0x5 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x5 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_EIM_D23__UART3_CTS 0x1e4 + MX53_PAD_EIM_EB3__UART3_RTS 0x1e4 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4 + >; + }; + + pinctrl_usb_otg_vbus: usb-otg-vbusgrp { + fsl,pins = < + /* USB_HS_OTG_VBUS_ENABLE */ + MX53_PAD_KEY_ROW4__GPIO4_15 0x1c4 + >; + }; + + pinctrl_usbh2: usbh2grp { + fsl,pins = < + /* USB H2 */ + MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180 + MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180 + MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180 + MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180 + MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180 + MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180 + MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180 + MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180 + MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP 0x180 + MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT 0x180 + MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK 0x180 + MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR 0x5 + MX53_PAD_EIM_D30__USBOH3_USBH2_OC 0x180 + >; + }; + + pinctrl_usbh2_vbus: usbh2-vbusgrp { + fsl,pins = < + /* USB_HS_HOST2_VBUS_ENABLE */ + MX53_PAD_EIM_D31__GPIO3_31 0x0 + >; + }; + + pinctrl_usbh3_vbus: usbh3-vbusgrp { + fsl,pins = < + /* USB_HS_HOST3_VBUS_ENABLE */ + MX53_PAD_CSI0_DAT9__GPIO5_27 0x0 + >; + }; + + pinctrl_usbh3: usbh3grp { + fsl,pins = < + /* USB H3 */ + MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180 + MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180 + MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180 + MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180 + MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180 + MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180 + MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180 + MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180 + MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR 0x5 + MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK 0x180 + MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT 0x180 + MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP 0x180 + MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC 0x180 + >; + }; + + pinctrl_usb_otg: usbotggrp { + fsl,pins = < + /* USB_OTG_FAULT_N */ + MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x180 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 683dcbe27cbd63b6b30a8e20b7dc52d604a84616..41a2e2a2b07926235e321a206b7f0514546a8d2b 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -22,7 +22,7 @@ <0xb0000000 0x20000000>; }; - display0: display@di0 { + display0: disp0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb565"; pinctrl-names = "default"; @@ -172,7 +172,7 @@ >; }; - led_pin_gpio7_7: led_gpio7_7@0 { + led_pin_gpio7_7: led_gpio7_7 { fsl,pins = < MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 >; @@ -314,7 +314,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p2v>; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 33cb64fc8372bbfd8d4f1d17840bd307e0e92a2a..51f4a42a55e2d7d97389304afcae6e45899003df 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -232,12 +232,12 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; }; - magnetometer: mag3110@0e { + magnetometer: mag3110@e { compatible = "fsl,mag3110"; reg = <0x0e>; }; diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index 0ecb43d88522318701304fad35e3c214cfcb276e..7eb53e48c2f441d92f8968db3728d2fcdc2ae5ce 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -1,12 +1,42 @@ /* - * Copyright 2013 Lothar Waßmann + * Copyright 2013-2017 Lothar Waßmann * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -24,7 +54,7 @@ }; soc { - display: display@di0 { + display: disp0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; @@ -173,28 +203,24 @@ default-brightness-level = <50>; }; - regulators { - reg_lcd_pwr: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "LCD POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - }; + reg_lcd_pwr: regulator-lcd-pwr { + compatible = "regulator-fixed"; + regulator-name = "LCD POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; - reg_lcd_reset: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "LCD RESET"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - }; + reg_lcd_reset: regulator-lcd-reset { + compatible = "regulator-fixed"; + regulator-name = "LCD RESET"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; }; }; @@ -203,7 +229,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_2v5>; @@ -228,7 +254,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc2007>; interrupt-parent = <&gpio3>; - interrupts = <26 0>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = <660>; wakeup-source; diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts index 3cf682a681f40a986e8eb3142f3621ec5d6736b0..f2b2ad3ce9e52d6084c31f8983dcf21108079159 100644 --- a/arch/arm/boot/dts/imx53-tx53-x13x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts @@ -1,6 +1,42 @@ /* - * Copyright 2013 Lothar Waßmann + * Copyright 2013-2017 Lothar Waßmann * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 at the following locations: @@ -63,82 +99,46 @@ default-brightness-level = <50>; }; - regulators { - reg_lcd_pwr0: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "LVDS0 POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - }; - - reg_lcd_pwr1: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "LVDS1 POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - }; + reg_lcd_pwr0: regulator-lvds0-pwr { + compatible = "regulator-fixed"; + regulator-name = "LVDS0 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; }; -}; -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - - touchscreen2: eeti@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti2>; - interrupt-parent = <&gpio3>; - interrupts = <23 0>; - wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; - wakeup-source; + reg_lcd_pwr1: regulator-lvds1-pwr { + compatible = "regulator-fixed"; + regulator-name = "LVDS1 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; }; }; &i2c3 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_2v5>; VDDIO-supply = <®_3v3>; clocks = <&mclk>; }; - - touchscreen1: eeti@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti1>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; }; &iomuxc { imx53-tx53-x13x { - pinctrl_i2c2: i2c2-grp1 { - fsl,pins = < - MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 - MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 - >; - }; - pinctrl_lvds0: lvds0grp { fsl,pins = < MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 7807c1fa110176b12cfa26f238186da8dcdeafe7..71b58b6933e1d7fb57cfe90b97b1232d8b8efaed 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -1,15 +1,45 @@ /* - * Copyright 2012 + * Copyright 2012-2017 * based on imx53-qsb.dts * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx53.dtsi" @@ -66,61 +96,50 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2v5: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; + reg_2v5: regulator-2v5 { + compatible = "regulator-fixed"; + regulator-name = "2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; - reg_3v3: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - reg_can_xcvr: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "CAN XCVR"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can_xcvr>; - gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; - }; + reg_can_xcvr: regulator-can-xcvr { + compatible = "regulator-fixed"; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + }; - reg_usbh1_vbus: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1_vbus>; - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usbh1_vbus: regulator-usbh1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usbotg_vbus: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "usbotg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_vbus>; - gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usbotg_vbus: regulator-usbotg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { @@ -208,14 +227,17 @@ phy0: ethernet-phy@0 { interrupt-parent = <&gpio2>; - interrupts = <4>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; device_type = "ethernet-phy"; }; }; &i2c1 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-0 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; clock-frequency = <400000>; status = "okay"; @@ -225,7 +247,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ds1339>; interrupt-parent = <&gpio4>; - interrupts = <20 0>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + trickle-resistor-ohms = <250>; + trickle-diode-disable; }; }; @@ -368,15 +392,29 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < - MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 - MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 + MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 + MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpiogrp { + fsl,pins = < + MX53_PAD_EIM_D21__GPIO3_21 0x400001e6 + MX53_PAD_EIM_D28__GPIO3_28 0x400001e6 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < - MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000 - MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 + MX53_PAD_GPIO_3__I2C3_SCL 0x400001e4 + MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4 + >; + }; + + pinctrl_i2c3_gpio: i2c3-gpiogrp { + fsl,pins = < + MX53_PAD_GPIO_3__GPIO1_3 0x400001e6 + MX53_PAD_GPIO_6__GPIO1_6 0x400001e6 >; }; diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts index fc51b87ad2087022e8b8648c71fac18e00abb762..25c78f19826c823a19201e40c15604e1ae0f2707 100644 --- a/arch/arm/boot/dts/imx53-voipac-bsb.dts +++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts @@ -130,7 +130,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 8bf0d89cdd355cf0c9484335476e08fb0fca1b5e..84f17f7abb7136104cf2265bb34c7e0bba0ebd12 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -80,7 +80,7 @@ ports = <&ipu_di0>, <&ipu_di1>; }; - tzic: tz-interrupt-controller@0fffc000 { + tzic: tz-interrupt-controller@fffc000 { compatible = "fsl,imx53-tzic", "fsl,tzic"; interrupt-controller; #interrupt-cells = <1>; @@ -299,14 +299,14 @@ reg = <0x53f00000 0x60>; }; - usbphy0: usbphy@0 { + usbphy0: usbphy-0 { compatible = "usb-nop-xceiv"; clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; clock-names = "main_clk"; status = "okay"; }; - usbphy1: usbphy@1 { + usbphy1: usbphy-1 { compatible = "usb-nop-xceiv"; clocks = <&clks IMX5_CLK_USB_PHY2_GATE>; clock-names = "main_clk"; @@ -433,15 +433,6 @@ clock-names = "ipg", "per"; }; - srtc: srtc@53fa4000 { - compatible = "fsl,imx53-rtc", "fsl,imx25-rtc"; - reg = <0x53fa4000 0x4000>; - interrupts = <24>; - interrupt-parent = <&tzic>; - clocks = <&clks IMX5_CLK_SRTC_GATE>; - clock-names = "ipg"; - }; - iomuxc: iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc"; reg = <0x53fa8000 0x4000>; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts index 0677625463d6fec91172fb251f4a49955940c108..5f0d196495d08ff23b6b2d2478f34545c7bca110 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts @@ -52,7 +52,7 @@ reg = <0x10000000 0x40000000>; }; - display0: display@di0 { + display0: disp0 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx-parallel-display"; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index 32a812b1839ea0cc5e3ab4451b031e6053fb9b29..cc418cecabdb3b76ef5be767184950b5d609d64f 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -32,7 +32,7 @@ }; soc { - display0: display@di0 { + display0: disp0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index 15203f0e9725cb775dac06399ab212d12479e536..126ff964edede598c126d62b0561979f5c6a3c06 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -21,7 +21,7 @@ }; soc { - display0: display@di0 { + display0: disp0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 26541538562c6d937fde7b96066112c5c7463689..5705ebee05955932f8e7cfce562d5c4115b8f1ae 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -88,7 +88,7 @@ }; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts index 6de83c72bd7243448ca5bd0113880ce5c016fae0..971f9fc39c66c8ec22f7acf63970b7699587b29d 100644 --- a/arch/arm/boot/dts/imx6dl-icore.dts +++ b/arch/arm/boot/dts/imx6dl-icore.dts @@ -57,3 +57,12 @@ &can2 { status = "okay"; }; + +&i2c1 { + max11801: touchscreen@48 { + compatible = "maxim,max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 275c6c05219dbdc54ba4c994459a45506608e65b..23e108204e1e7d505515fb3e8760eb2ee8da9308 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -157,7 +157,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -165,7 +165,7 @@ VDDIO-supply = <®_3p3v>; }; - pmic: pf0100@08 { + pmic: pf0100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; interrupt-parent = <&gpio5>; diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts index aac42ac465b64619a82773bf097cc49051c5aa08..51a9bb9d6bc2811bc347b1553e8ba74a2f2f642f 100644 --- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,70 +42,16 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6DL Module on CoMpact TFT"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; +}; - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&ET070001DM6>; - - ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; +&backlight { + pwms = <&pwm2 0 500000 0>; + /delete-property/ turn-on-delay-ms; }; &can1 { @@ -116,14 +62,14 @@ xceiver-supply = <®_3v3>; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &kpp { status = "disabled"; }; +&lcd_panel { + compatible = "edt,etm0700g0edh6"; +}; + ®_can_xcvr { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..fc23b4d291a1b462695c192f3618b7f86de71583 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6s-8034.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts index ff8f7b1c42825b5f24fe16846a7a01367cae992a..9eb2ef17339c739080b9ea02b753574ba582197f 100644 --- a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts +++ b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts @@ -1,5 +1,5 @@ /* - * Copyright 2015-2016 Lothar Waßmann + * Copyright 2015-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,174 +42,15 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6S-8034 Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - aliases { - display = &display; - ipu1 = &ipu1; - }; - cpus { /delete-node/ cpu@1; }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -227,11 +68,3 @@ MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */ >; }; - -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -®_lcd0_pwr { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..4101c6597721c70cf167a2c89a21730121bbdee0 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6s-8035.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts index f988950e9443d44b19886f12ad9d9f423556c91e..a5532ecc18c5ad9d3901f53e575483da3cbe9cc6 100644 --- a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts +++ b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts @@ -1,5 +1,5 @@ /* - * Copyright 2015-2016 Lothar Waßmann + * Copyright 2015-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,174 +42,15 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6S-8035 Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - aliases { - display = &display; - ipu1 = &ipu1; - }; - cpus { /delete-node/ cpu@1; }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -220,14 +61,6 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -®_lcd0_pwr { - status = "disabled"; -}; - &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts index d1f1298ec55a8f28e80a297ee9e15d62d8385d28..67ed0452f5de5c1a2437a6ccbf70b7fdcdb195e4 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,166 +42,9 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6U-801x Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..d34189fc52d9793e70ab56a6b6c23b1501122071 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6u-8033.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts index 4d3204a56f46114347be5943691be5917e752dab..7030b2654bbd23d33580d79679e7016671b8a0e0 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,169 +42,11 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6U-8033 Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -215,14 +57,6 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -®_lcd0_pwr { - status = "disabled"; -}; - &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..aef5fcc42904f6e5775e92df3b72573252e5a0b5 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6u-801x.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts index 5e0c6bb49f37a38b50ae6e849fad3898f0428c21..5342f2f5a8a856c25fbc70200212f6f6aec96ce1 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,137 +42,9 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" / { model = "Ka-Ro electronics TX6U-811x Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 0>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; -}; - -&i2c3 { - polytouch2: eeti@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - -&kpp { - status = "disabled"; /* pad conflict with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds_timing0>; - lvds_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "disabled"; - - display-timings { - native-mode = <&lvds_timing1>; - lvds_timing1: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts index b9a783f7160e29fd177f4e4697625722ee1b9ba7..c4588fb0bf6fe492ed84f48adcc8eea5c94d9299 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts @@ -1,5 +1,5 @@ /* - * Copyright 2016 Lothar Waßmann + * Copyright 2016-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -40,216 +40,9 @@ */ /dts-v1/; -#include "imx6dl.dtsi" -#include "imx6qdl-tx6.dtsi" +#include "imx6dl-tx6u-811x.dts" +#include "imx6qdl-tx6-mb7.dtsi" / { - model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard"; - compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; -}; - -&can1 { - status = "disabled"; -}; - -&can2 { - xceiver-supply = <®_3v3>; -}; - -&i2c3 { - polytouch1: eeti@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - -&kpp { - status = "disabled"; /* pads partially clash with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds0_timing1>; - - lvds0_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds0_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds0_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds1_timing2>; - - lvds1_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds1_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds1_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; + model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard"; }; diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts new file mode 100644 index 0000000000000000000000000000000000000000..aa4d4faaaec4e0d45bcaf6de097a1a8cba841f09 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts @@ -0,0 +1,22 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-wandboard-revd1.dtsi" + +/ { + model = "Wandboard i.MX6 Dual Lite Board revD1"; + compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 8475e6cc59ac63c68036987845e33f8c3e50a164..4d693a75ce98b99ba7d9c1ec57f13b4361ddba39 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -60,35 +60,35 @@ }; soc { - ocram: sram@00900000 { + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips1: aips-bus@02000000 { - iomuxc: iomuxc@020e0000 { + aips1: aips-bus@2000000 { + iomuxc: iomuxc@20e0000 { compatible = "fsl,imx6dl-iomuxc"; }; - pxp: pxp@020f0000 { + pxp: pxp@20f0000 { reg = <0x020f0000 0x4000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; }; - epdc: epdc@020f4000 { + epdc: epdc@20f4000 { reg = <0x020f4000 0x4000>; interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; }; - lcdif: lcdif@020f8000 { + lcdif: lcdif@20f8000 { reg = <0x020f8000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; }; }; - aips2: aips-bus@02100000 { - i2c4: i2c@021f8000 { + aips2: aips-bus@2100000 { + i2c4: i2c@21f8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index 4bbfe3d6102756178a14e76a4b60b1c02dfead96..8b56656e53da8c50ff9a9ba4468d280b2250780b 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -76,7 +76,7 @@ }; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index a35c7a54ad3b5484be85987024d771e42fb01bb1..27dc0fc686a918b75dc9ac37db5e670560c97217 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -77,7 +77,7 @@ }; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 60d33e99de76037cf546c8000ade4304c959c1c6..40b2c67fe7af2c1511c19de5171ac55541be442b 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -76,7 +76,7 @@ }; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index 1015e55ca8f7bd9eaa2edf68ed499f577fbac083..b915837bbb5f7f867aad5fc27d39898a034ce4fb 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -165,7 +165,7 @@ #size-cells = <0>; reg = <0x3>; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&mclk>; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index fe6ab0aa34f9dd5f7b5d0fb19b6c9be4858fb9d9..bc7587c383f687b72abc736809a7826e73840dca 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -77,8 +77,7 @@ regulator-name = "regulator-pcie-power-on-gpio"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>; - enable-active-high; + gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; }; reg_usb_h1_vbus: usb_h1_vbus { @@ -362,7 +361,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; - vdd-supply = <®_pcie_power_on_gpio>; + vpcie-supply = <®_pcie_power_on_gpio>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts new file mode 100644 index 0000000000000000000000000000000000000000..16658b76fc4e8ed18653950255eeb123efb1a128 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts @@ -0,0 +1,51 @@ +/* + * Copyright 2017 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q-display5.dtsi" + +&panel { + compatible = "tianma,tm070jdhg30"; +}; + +&ldb { + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..4084de43d4d9c26ee83576a36130ac96e4ae483b --- /dev/null +++ b/arch/arm/boot/dts/imx6q-display5.dtsi @@ -0,0 +1,596 @@ +/* + * Copyright 2017 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" + +#include +#include +#include + +/ { + model = "Liebherr (LWN) display5 i.MX6 Quad Board"; + compatible = "lwn,display5", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm2 0 5000000 0>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 101 102 103 104 105 106 107 108 109 + 110 111 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 128 129 + 130 131 132 133 134 135 136 137 138 139 + 140 141 142 143 144 145 146 147 148 149 + 150 151 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 168 169 + 170 171 172 173 174 175 176 177 178 179 + 180 181 182 183 184 185 186 187 188 189 + 190 191 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 208 209 + 210 211 212 213 214 215 216 217 218 219 + 220 221 222 223 224 225 226 227 228 229 + 230 231 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 248 249 + 250 251 252 253 254 255>; + default-brightness-level = <250>; + enable-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; + }; + + reg_lvds: regulator-lvds { + compatible = "regulator-fixed"; + regulator-name = "lvds_ppen"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lvds>; + gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbh1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-enable-ramp-delay = <300000>; + }; + + sound { + compatible = "simple-audio-card"; + label = "tfa9879-mono"; + + simple-audio-card,dai-link { + /* DAC */ + format = "i2s"; + bitclock-master = <&dailink_master>; + frame-master = <&dailink_master>; + + dailink_master: cpu { + sound-dai = <&ssi2>; + }; + codec { + sound-dai = <&codec>; + }; + }; + }; + + panel: panel-lvds0 { + backlight = <&backlight_lvds>; + power-supply = <®_lvds>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(5) | + IMX_AUDMUX_V2_PTCR_TCSEL(5) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(5) + >; + }; + + aud6 { + fsl,audmux-port = <5>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_RFSEL(8) | + IMX_AUDMUX_V2_PTCR_RCSEL(8) | + IMX_AUDMUX_V2_PTCR_TFSEL(1) | + IMX_AUDMUX_V2_PTCR_TCSEL(1) | + IMX_AUDMUX_V2_PTCR_RFSDIR | + IMX_AUDMUX_V2_PTCR_RCLKDIR | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(1) + >; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs &pinctrl_ecspi2_flwp>; + status = "okay"; + + s25fl256s: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <40000000>; + reg = <0>; + + partition@0 { + label = "SPL (spi)"; + reg = <0x0 0x20000>; + read-only; + }; + partition@1 { + label = "u-boot (spi)"; + reg = <0x20000 0x100000>; + read-only; + }; + partition@2 { + label = "uboot-env (spi)"; + reg = <0x120000 0x10000>; + }; + partition@3 { + label = "uboot-envr (spi)"; + reg = <0x130000 0x10000>; + }; + partition@4 { + label = "linux-recovery (spi)"; + reg = <0x140000 0x800000>; + }; + partition@5 { + label = "swupdate-fitImg (spi)"; + reg = <0x940000 0x400000>; + }; + partition@6 { + label = "swupdate-initramfs (spi)"; + reg = <0xD40000 0x800000>; + }; + }; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-handle = <ðernet_phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + ethernet_phy0: ethernet-phy@0 { + compatible = "marvell,88E1510"; + device_type = "ethernet-phy"; + /* Set LED0 control: */ + /* On - Link, Blink - Activity, Off - No Link */ + marvell,reg-init = <3 0x10 0 0x1011>; + max-speed = <100>; + reg = <0>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: tfa9879@6C { + #sound-dai-cells = <0>; + compatible = "nxp,tfa9879"; + reg = <0x6C>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + at24@50 { + compatible = "atmel,24c256"; + pagesize = <64>; + reg = <0x50>; + }; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pwm2 { + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + /* I2S OUTPUT AUD6*/ + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0 + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0 + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0 + >; + }; + + pinctrl_backlight: dispgrp { + fsl,pins = < + /* BLEN_OUT */ + MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi2_cs: ecspi2csgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1 + >; + }; + + pinctrl_ecspi2_flwp: ecspi2flwpgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi3_cs: ecspi3csgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0 + >; + }; + + pinctrl_ecspi3_flwp: ecspi3flwpgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_lvds: reqlvdsgrp { + fsl,pins = < + /* LVDS_PPEN_OUT */ + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x030b0 + >; + }; + + pinctrl_usbh1_vbus: usbh1_vbus_grp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 33eb7f180995dfccbd483d4e140e3b63902753a8..f0316ea96898d31fba547c5c95d57aa7ebd606be 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -139,7 +139,7 @@ &pinctrl_pfuze>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; interrupt-parent = <&gpio3>; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 9dbeea05a9495f6fc2b5e56b55659508ca1230df..29adaa7c72f84cc4efb327df156f8af584337491 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -211,7 +211,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -322,7 +322,7 @@ reg = <0x1c>; }; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -330,7 +330,7 @@ VDDIO-supply = <®_3p3v>; }; - touchscreen: egalax_ts@04 { + touchscreen: egalax_ts@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; @@ -392,127 +392,124 @@ }; &iomuxc { - imx6q-gw5400-a { - - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 - MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 - MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 - MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 + MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 + MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 + MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */ - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */ + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */ - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */ + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; - pinctrl_pps: ppsgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */ - >; - }; + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */ + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts index 8f9252889971a1421f28d05fde46e7956d0a6230..a3269f57df2b5ce74fc036b8d69b25e2fbb273bb 100644 --- a/arch/arm/boot/dts/imx6q-h100.dts +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -185,7 +185,7 @@ reg = <0x68>; }; - sgtl5000: sgtl5000@0a { + sgtl5000: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; pinctrl-names = "default"; @@ -195,7 +195,7 @@ VDDIO-supply = <®_3p3v>; }; - tc358743: tc358743@0f { + tc358743: tc358743@f { compatible = "toshiba,tc358743"; reg = <0x0f>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts index e451b4ceb4d81ef1972f0b1f51a782cf3bf94a1c..b81f48c6a8c68a9eab475e989db3297d73cf39ac 100644 --- a/arch/arm/boot/dts/imx6q-icore-rqs.dts +++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts @@ -47,30 +47,6 @@ / { model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit"; compatible = "engicam,imx6-icore-rqs", "fsl,imx6q"; - - sound { - compatible = "fsl,imx-audio-sgtl5000"; - model = "imx-audio-sgtl5000"; - ssi-controller = <&ssi1>; - audio-codec = <&codec>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <4>; - }; -}; - -&i2c3 { - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clks IMX6QDL_CLK_CKO>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; - VDDD-supply = <®_1p8v>; - }; }; &sata { diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts index eedbe737420c8472ac030b25744875033c418790..cab36f48d5f109e9a3a6f434a5703591ce1660d0 100644 --- a/arch/arm/boot/dts/imx6q-mccmon6.dts +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -121,7 +121,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pfuze100: pmic@08 { + pfuze100: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index d83cfb6ec598993831d5447fb89803107fe45edc..7d7dc59507cfd0bf3e2e55d3d64a2107fdb729dd 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -158,7 +158,6 @@ regulator-max-microvolt = <1500000>; gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-always-on; }; reg_sata: regulator-sata { @@ -255,7 +254,7 @@ reg = <0x68>; }; - sbs_battery: bq20z75@0b { + sbs_battery: bq20z75@b { compatible = "sbs,sbs-battery"; reg = <0x0b>; sbs,i2c-retry-count = <50>; @@ -295,7 +294,7 @@ pinctrl-0 = <&pinctrl_i2c2_novena>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -447,6 +446,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie_novena>; reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts new file mode 100644 index 0000000000000000000000000000000000000000..1effb58f304c3f2c76750ff4452e0bec08e3c936 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-pistachio.dts @@ -0,0 +1,693 @@ +/* + * Copyright (C) 2017 NutsBoard.Org + * + * Author: Wig Cheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include +#include +#include "imx6q.dtsi" + +/ { + model = "NutsBoard i.MX6 Quad Pistachio board"; + compatible = "nutsboard,imx6q-pistachio", "fsl,imx6q"; + + chosen { + stdout-path = &uart4; + }; + + memory: memory { + reg = <0x10000000 0x80000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + wlan_en_reg: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + }; + + sound { + compatible = "fsl,imx-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "audio-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; + + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000>; + brightness-levels = < + 0 /*1 2 3 4 5 6*/ 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 + >; + default-brightness-level = <94>; + status = "okay"; + }; + + panel { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_sgtl5000>; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic: pfuze100@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + ar1021@4d { + compatible = "microchip,ar1021-i2c"; + reg = <0x4d>; + interrupt-parent = <&gpio6>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /*pcie power*/ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 /*LCD power*/ + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 /*backlight power*/ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 /*SD3 CD pin*/ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /*codec power*/ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /*touch reset*/ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b01 /*touch irq*/ + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0/*backlight pwr*/ + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 /*gpio 5V_1*/ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0 /*gpio 5V_2*/ + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 /*gpio 5V_3*/ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /*gpio 5V_4*/ + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 /*AUX_5V_EN*/ + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 /*AUX_5VB_EN*/ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 /*AUX_3V3_EN*/ + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0 /*I2C expander pwr*/ + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + /* AR8035 reset */ + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x130b0 + /* AR8035 interrupt */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 + /* AR8035 pin strapping: IO voltage: pull up */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + /* AR8035 pin strapping: PHYADDR#0: pull down */ + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 + /* AR8035 pin strapping: PHYADDR#1: pull down */ + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + /* AR8035 pin strapping: MODE#1: pull up */ + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + /* AR8035 pin strapping: MODE#3: pull up */ + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + /* AR8035 pin strapping: MODE#0: pull down */ + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + >; + }; + + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c1_sgtl5000: i2c1-sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 /* sys_mclk */ + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x130b0 /*headphone det*/ + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x130b0 /*microphone det*/ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x15059 /*BT_EN*/ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17059 + MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17059 + MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17059 + MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x15059 /*WL_EN_LDO*/ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x15059 /*WL_EN*/ + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x15059 /*WL_IRQ*/ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17071 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17071 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17071 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17071 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17071 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b00 + >; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + fsl,dte-mode; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <0x5>; +}; + +&usbphy2 { + fsl,tx-d-cal = <0x5>; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + keep-power-in-suspend; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + vmmc-supply = <&wlan_en_reg>; + no-1-8-v; + keep-power-in-suspend; + non-removable; + cap-power-off-card; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&wdog1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 06f492e17ca70edc3de4aa21fbe5357397febaeb..a3cd7afac20a8c764497a07404fce94529b4297b 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -158,7 +158,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - sgtl5000: sgtl5000@0a { + sgtl5000: sgtl5000@a { clocks = <&clks IMX6QDL_CLK_CKO>; compatible = "fsl,sgtl5000"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts index 71746edc2ee9218d21cd8a738188ff24370862b0..ac3050a835e5502bf24ed3f04dc6500003d534f8 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,70 +42,16 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; +}; - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&ET070001DM6>; - - ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; +&backlight { + pwms = <&pwm2 0 500000 0>; + /delete-property/ turn-on-delay-ms; }; &can1 { @@ -116,14 +62,14 @@ xceiver-supply = <®_3v3>; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &kpp { status = "disabled"; }; +&lcd_panel { + compatible = "edt,etm0700g0edh6"; +}; + ®_can_xcvr { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts index f9cd21a41a797c8b2dc81a04f1485de650611e3e..4ee860b626ff6842d23ee3971d1a85b21416f79c 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,166 +42,13 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { - model = "Ka-Ro electronics TX6Q-1010 Module"; + model = "Ka-Ro electronics TX6Q-1010/-1030 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; +&ipu2 { + status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts index 959ff3fb7304e4c3aef373eb6801e54ddb086d90..a773f252816cb54091a60189be147c6d92616a03 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,70 +42,16 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; +}; - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&ET070001DM6>; - - ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; +&backlight { + pwms = <&pwm2 0 500000 0>; + /delete-property/ turn-on-delay-ms; }; &can1 { @@ -124,14 +70,14 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &kpp { status = "disabled"; }; +&lcd_panel { + compatible = "edt,etm0700g0edh6"; +}; + ®_can_xcvr { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts index b49133d25d80995e7a38d87195fc1c588c753efc..0a4daec8d3ad3abd733892febf7ab11029bc47ff 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,164 +42,11 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1020 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -210,14 +57,15 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; +&ipu2 { + status = "disabled"; }; &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <4>; + non-removable; no-1-8-v; fsl,wp-controller; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..9ffbb0fe7df860c1d343e0daca42166e6b326a57 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q-tx6q-1036.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts index 7c152e32758cbc63b634daa37b55c0c44a947d01..cb2fcb4896c6590efae1c8e411eca573426243aa 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1036.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1036.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,169 +42,11 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1036 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -215,18 +57,10 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &ipu2 { status = "disabled"; }; -®_lcd0_pwr { - status = "disabled"; -}; - &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..d43a5d8f174976bc78ae0c5d4043daa3d5e3d669 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q-tx6q-1010.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts index 0433e220a931318a216fe4852d34600fad840a7c..f7b0acb65352c3c3852c3e2ca7f70aef2a37a508 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,141 +42,17 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" / { - model = "Ka-Ro electronics TX6Q-1110 Module"; + model = "Ka-Ro electronics TX6Q-1110/-1130 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 0>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; -}; - -&i2c3 { - polytouch1: eeti@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; }; -&kpp { - status = "disabled"; /* pad conflict with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds_timing0>; - lvds_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "disabled"; - - display-timings { - native-mode = <&lvds_timing1>; - lvds_timing1: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; +&ipu2 { + status = "disabled"; }; &sata { status = "okay"; }; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts index d78b129d01ea492d6b65e3885ca7974a0225c269..387edf2b3f96b437da6b4b421b5c71faf2d64db9 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts @@ -1,5 +1,5 @@ /* - * Copyright 2016 Lothar Waßmann + * Copyright 2016-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -40,225 +40,9 @@ */ /dts-v1/; -#include "imx6q.dtsi" -#include "imx6qdl-tx6.dtsi" +#include "imx6q-tx6q-1110.dts" +#include "imx6qdl-tx6-mb7.dtsi" / { model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard"; - compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &lvds0; - ipu1 = &ipu2; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; -}; - -&can1 { - status = "disabled"; -}; - -&can2 { - xceiver-supply = <®_3v3>; -}; - -&i2c3 { - polytouch1: eeti@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - -&ipu2 { - status = "disabled"; -}; - -&kpp { - status = "disabled"; /* pads partially clash with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds0_timing1>; - - lvds0_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds0_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds0_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds1_timing2>; - - lvds1_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds1_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds1_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; }; diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts index 16d5be1aeb3ce3f56c0c01fe93140e55b0355269..f5d9c34b0d392caca7b3b9e8aa8e6c40ab40de1b 100644 --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -188,6 +188,8 @@ /delete-node/&hdmi_mux_1; &hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmicec>; ddc-i2c-bus = <&i2c2>; status = "okay"; }; @@ -211,6 +213,12 @@ >; }; + pinctrl_hdmicec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + pinctrl_hpd: hpdgrp { fsl,pins = < MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts new file mode 100644 index 0000000000000000000000000000000000000000..e87ddb1686692619db9bcf6a277d740c03a6d8e5 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts @@ -0,0 +1,26 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-wandboard-revd1.dtsi" + +/ { + model = "Wandboard i.MX6 Quad Board revD1"; + compatible = "wand,imx6q-wandboard", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 90a741732f606fc00c50cd755bb7c4858f60c031..bc581aa5cf1785fce20c8e46d5c9e2fddedca4d2 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -79,15 +79,15 @@ }; soc { - ocram: sram@00900000 { + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x40000>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips-bus@02000000 { /* AIPS1 */ - spba-bus@02000000 { - ecspi5: ecspi@02018000 { + aips-bus@2000000 { /* AIPS1 */ + spba-bus@2000000 { + ecspi5: ecspi@2018000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -102,12 +102,12 @@ }; }; - iomuxc: iomuxc@020e0000 { + iomuxc: iomuxc@20e0000 { compatible = "fsl,imx6q-iomuxc"; }; }; - sata: sata@02200000 { + sata: sata@2200000 { compatible = "fsl,imx6q-ahci"; reg = <0x02200000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; @@ -118,7 +118,7 @@ status = "disabled"; }; - gpu_vg: gpu@02204000 { + gpu_vg: gpu@2204000 { compatible = "vivante,gc"; reg = <0x02204000 0x4000>; interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; @@ -128,7 +128,7 @@ power-domains = <&pd_pu>; }; - ipu2: ipu@02800000 { + ipu2: ipu@2800000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ipu"; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index ea339fa58f4a5a99f1834778e926ce022f139cdd..e80fdca585f861c7e716666270770f2b77127871 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -222,7 +222,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -313,7 +313,7 @@ }; }; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 9cd2a7477ed76b20bd938319c0fcef35a5117395..829a479381798dc6ff5c5339f9138f80017fe6c5 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -54,7 +54,7 @@ stdout-path = &uart4; }; - display@di0 { + disp0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "bgr666"; pinctrl-names = "default"; @@ -209,7 +209,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index ad84eddb6836f070b0fafdf3581e6dcb37372bfc..fc66bbfd6796b2d46920bd79ae4b46fa4d8ae532 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -167,7 +167,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -248,7 +248,7 @@ }; }; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 885556260bd0737b2164967dcad8af83d44ef066..dea8fc43c692d3a32e4268f1bd32de36475db65e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -332,175 +332,173 @@ }; &iomuxc { - imx6qdl-gw51xx { - pinctrl_adv7180: adv7180grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0 - MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0 - >; - }; + pinctrl_adv7180: adv7180grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0 + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_ipu1_csi0: ipu1csi0grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 - MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 - MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 - >; - }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ - >; - }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; - pinctrl_pps: ppsgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 - >; - }; + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 115d706228eff5067f6a536e049e07183a778631..363a44394dad76e13b3a7082414d61dba7790fc3 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -303,7 +303,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -311,7 +311,7 @@ VDDIO-supply = <®_3p3v>; }; - touchscreen: egalax_ts@04 { + touchscreen: egalax_ts@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; @@ -423,213 +423,211 @@ }; &iomuxc { - imx6qdl-gw52xx { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 - MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 - MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 - MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 + MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 + MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 + MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + >; + }; - pinctrl_ecspi3: escpi3grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 - MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 - MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 - MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 - >; - }; + pinctrl_ecspi3: escpi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ - >; - }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */ - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */ + >; + }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ - >; - }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; - pinctrl_pps: ppsgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 - >; - }; + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 - >; - }; + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 - >; - }; + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 24be7965056c13d898d026eb852ba30db284b206..c75385c0cad050cff380463c461e23164f726f95 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -294,7 +294,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -302,7 +302,7 @@ VDDIO-supply = <®_3p3v>; }; - touchscreen: egalax_ts@04 { + touchscreen: egalax_ts@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; @@ -415,205 +415,203 @@ }; &iomuxc { - imx6qdl-gw53xx { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 - MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 - MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 - MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 + MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 + MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 + MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ - >; - }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ - >; - }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; - pinctrl_pps: ppsgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 - >; - }; + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ - MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 - >; - }; + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 - >; - }; + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 4594b22791695436df2cd9ff372f332db74ad5c4..eab75f3dbaf324e0e250998bb6b2c2c9ff7a6391 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -223,7 +223,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -331,7 +331,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -339,7 +339,7 @@ VDDIO-supply = <®_3p3v>; }; - touchscreen: egalax_ts@04 { + touchscreen: egalax_ts@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; @@ -468,221 +468,219 @@ }; &iomuxc { - imx6qdl-gw54xx { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 - MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 - MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 - MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 + MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 + MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 + MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; - pinctrl_ecspi2: escpi2grp { - fsl,pins = < - MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 - MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 - MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 - MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 - >; - }; + pinctrl_ecspi2: escpi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 + >; + }; - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ - >; - }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; - pinctrl_pps: ppsgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 - >; - }; + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 - >; - }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4_backlight: pwm4grpbacklight { - fsl,pins = < - /* LVDS_PWM J6.5 */ - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4_backlight: pwm4grpbacklight { + fsl,pins = < + /* LVDS_PWM J6.5 */ + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4_dio: pwm4grpdio { - fsl,pins = < - /* DIO3 J16.4 */ - MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4_dio: pwm4grpdio { + fsl,pins = < + /* DIO3 J16.4 */ + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 - >; - }; + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 - >; - }; + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 405b40310ddf2828672e8c0d7245b42ea701ae80..30d4662d44801c69d7198fe76e562c323eeaea15 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -320,110 +320,108 @@ }; &iomuxc { - imx6qdl-gw51xx { - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ - >; - }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ + >; + }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ - >; - }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index 67613dd7cc926fa6d11c273dadfb1c8314365ad1..c67c106050705bc2879e62ee9a8048339de3068e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -270,105 +270,103 @@ }; &iomuxc { - imx6qdl-gw552x { - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ - >; - }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 988334c889eb79986f51f12b27d23cbec46de61d..37c07c0748aaf99e57ceef90512331e8c7cdf39b 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -138,7 +138,7 @@ }; /* Pro baseboard model */ - sgtl5000: sgtl5000@0a { + sgtl5000: sgtl5000@a { clocks = <&clks IMX6QDL_CLK_CKO>; compatible = "fsl,sgtl5000"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index 7ca291e9dbdb234b253d09b72fd1cb2a3f5aac71..b6220d62f6de0f48f2ba667f237d90e987f1bcf7 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -41,6 +41,7 @@ #include #include +#include / { memory { @@ -118,17 +119,77 @@ clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>; clock-names = "refclk"; }; -}; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx6qdl-icore-rqs-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack", + "Speaker", "Line Out Jack", + "Speaker", "Ext Spk"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; }; &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; status = "okay"; + + audmux_ssi1 { + fsl,audmux-port = ; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_SYN) + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4) + >; + }; + + audmux_aud4 { + fsl,audmux-port = ; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0) + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_3p3v>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + xceiver-supply = <®_3p3v>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>; }; &fec { @@ -174,6 +235,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + sgtl5000: codec@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p8v>; + }; }; &pcie { @@ -184,6 +255,7 @@ }; &ssi1 { + fsl,mode = "i2s-slave"; status = "okay"; }; @@ -270,6 +342,20 @@ >; }; + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 56d0c5d21cd01b528eb09300bf0ba82156c64e83..a1b469c142f10d0e42d204005361a396987b0218 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -42,6 +42,7 @@ #include #include +#include / { memory { @@ -55,6 +56,25 @@ default-brightness-level = <7>; }; + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + + reg_2p5v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -87,6 +107,59 @@ #clock-cells = <0>; clock-frequency = <25000000>; /* 25MHz for example */ }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx6qdl-icore-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack", + "Speaker", "Line Out Jack", + "Speaker", "Ext Spk"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + + audmux_ssi1 { + fsl,audmux-port = ; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_SYN) + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4) + >; + }; + + audmux_aud4 { + fsl,audmux-port = ; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0) + >; + }; }; &can1 { @@ -141,6 +214,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + sgtl5000: codec@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p8v>; + }; }; &pwm3 { @@ -149,6 +232,11 @@ status = "okay"; }; +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; @@ -178,6 +266,15 @@ }; &iomuxc { + pinctrl_audmux: audmux { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 6b81580623ff70ae494ee28a74b02c180503e23c..4cc4e23cf99c4e2f3f6317791b21d4dd2cf04ca1 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -255,7 +255,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; @@ -279,7 +279,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - touchscreen@04 { + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index b63134e3b51a078a44b65698b7db3707c9f0bcdd..3a77f0fedfce9d439ca04c8437107aa906ade469 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -256,7 +256,7 @@ status = "okay"; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; @@ -397,7 +397,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; @@ -429,7 +429,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - touchscreen@04 { + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index a24e4f1911abe77917726d8ff8342f7dcb88dab2..40942d6b94b366737b2c66177617a2f993ef9956 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -120,7 +120,7 @@ }; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; @@ -315,7 +315,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; @@ -347,7 +347,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - touchscreen@04 { + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index d309a4d0eb08b38c0ba551ee3652549421538eb5..4bdf29169d2a0e8193e8c41c481474d67398757f 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -197,7 +197,7 @@ status = "okay"; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; @@ -313,7 +313,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -340,7 +340,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - touchscreen@04 { + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 5cf90c24c70791a2fc7c89a386b0ebe3e9fa3d17..6e9549ff11da965e2cead22f0e95dcffdd0f220a 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -121,7 +121,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 6a7594e5d183f92c5ed7df23466d2e4bc3e508f2..4fa2fac3877b5a5685d85654d44476a933c0e72b 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -244,7 +244,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 756c5054f047724f7e12a1fad1ca98fde09f50c2..35de7adc997bf6f86ed047515bbaa2a09872b2c3 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -221,7 +221,7 @@ status = "okay"; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; @@ -350,7 +350,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index b72b6fa475801df93fc1e0413eb4b6ea3179fb07..0a50705b9c1897101a1732cc4bc703ff907b5443 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -67,7 +67,6 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio3 19 0>; - regulator-always-on; enable-active-high; }; }; @@ -214,6 +213,8 @@ }; &hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_cec>; ddc-i2c-bus = <&i2c2>; status = "okay"; }; @@ -304,7 +305,7 @@ }; }; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -411,7 +412,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - egalax_ts@04 { + egalax_ts@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio6>; @@ -486,6 +487,12 @@ >; }; + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 @@ -651,6 +658,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..5102fc47380b0305cd5eb8be17b8b248c3e1b141 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi @@ -0,0 +1,252 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_pwr>; + enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + turn-on-delay-ms = <35>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + lcd_panel: lcd-panel { + compatible = "edt,etm0700g0dh6"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + backlight = <&backlight>; + bus-format-override = "rgb24"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_out>; + }; + }; + }; + + display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + u-boot,panel-name = "edt,et057090dhu"; + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + u-boot,panel-name = "edt,et0350g0dh6"; + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + u-boot,panel-name = "edt,et0430g0dh6"; + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + u-boot,panel-name = "edt,etm0700g0dh6"; + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + CoMTFT { /* same as ET0700 but with inverted pixel clock */ + u-boot,panel-name = "edt,etm0700g0edh6"; + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_in>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..2ca2eb37e14fc8ad44a0724ccfe82c13940be64d --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi @@ -0,0 +1,286 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + aliases { + display = &lvds0; + lvds0 = &lvds0; + lvds1 = &lvds1; + }; + + backlight0: backlight0 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_lcd0_pwr>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + backlight1: backlight1 { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 0>; + power-supply = <®_lcd1_pwr>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + lvds0_panel: lvds0-panel { + compatible = "nlt,nl12880bc20-spwg-24"; + backlight = <&backlight0>; + power-supply = <®_3v3>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + lvds1_panel: lvds1-panel { + compatible = "nlt,nl12880bc20-spwg-24"; + backlight = <&backlight1>; + power-supply = <®_3v3>; + + port { + panel_in_lvds1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; +}; + +&kpp { + status = "disabled"; /* pad conflict with backlight1 PWM */ +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + + display-timings { + hsd100pxn1 { + u-boot,panel-name = "hannstar,hsd100pxn1"; + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <31>; + vfront-porch = <12>; + hsync-len = <96>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + nl12880bc20 { + u-boot,panel-name = "nlt,nl12880bc20-spwg-24"; + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hfront-porch = <50>; + vback-porch = <5>; + vfront-porch = <5>; + hsync-len = <60>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0700 { + u-boot,panel-name = "edt,etm0700g0dh6"; + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + u-boot,panel-name = "edt,et057090dhu"; + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; + + lvds1: lvds-channel@1 { + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + + display-timings { + hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <31>; + vfront-porch = <12>; + hsync-len = <96>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + nl12880bc20 { + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hfront-porch = <50>; + vback-porch = <5>; + vfront-porch = <5>; + hsync-len = <60>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +®_lcd0_pwr { + status = "okay"; +}; + +®_lcd1_pwr { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..4c4e2e1a931f8a965c24142fd04c2195a3224fc1 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi @@ -0,0 +1,99 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + backlight0 { + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; + power-supply = <®_lcd1_pwr>; + }; + + backlight1 { + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; + power-supply = <®_lcd1_pwr>; + }; + + lcd-panel { + compatible = "edt,et057090dhu"; + bus-format-override = "rgb24"; + pixelclk-active = <0>; + }; + + lvds0-panel { + compatible = "edt,etml1010g0dka"; + bus-format-override = "spwg-18"; + pixelclk-active = <0>; + }; + + lvds1-panel { + compatible = "edt,etml1010g0dka"; + bus-format-override = "spwg-18"; + pixelclk-active = <0>; + }; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&ds1339 { + /* + * The backup voltage of the module internal RTC is not wired + * by default on the MB7, so disable that RTC chip. + */ + status = "disabled"; +}; + +&i2c3 { + rtc: mcp7940x@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; +}; + +®_lcd0_pwr { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index c6bec97fbeaf567c19046c8b39ec1f6dddbcdd5c..6abb66cd7d4ac43ee9d837413f02c73f631a9885 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,6 +43,7 @@ #include #include #include +#include / { aliases { @@ -145,7 +146,7 @@ pinctrl-0 = <&pinctrl_lcd0_pwr>; gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-boot-on; + status = "disabled"; }; reg_lcd1_pwr: regulator-lcd1-pwr { @@ -157,7 +158,7 @@ pinctrl-0 = <&pinctrl_lcd1_pwr>; gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-boot-on; + status = "disabled"; }; reg_usbh1_vbus: regulator-usbh1-vbus { @@ -183,24 +184,56 @@ }; sound { - compatible = "karo,imx6qdl-tx6qdl-sgtl5000", - "fsl,imx-audio-sgtl5000"; - model = "sgtl5000-audio"; + compatible = "karo,imx6qdl-tx6-sgtl5000", + "simple-audio-card"; + simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; - ssi-controller = <&ssi1>; - audio-codec = <&sgtl5000>; - audio-routing = + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <5>; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; }; }; &audmux { status = "okay"; + + ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(4) | + IMX_AUDMUX_V2_PTCR_TCSEL(4) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + pins5 { + fsl,audmux-port = <4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(0) + >; + }; }; &can1 { @@ -241,7 +274,7 @@ &fec { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; + pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>, @@ -249,6 +282,7 @@ clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + phy-reset-post-delay = <10>; phy-handle = <&etnphy>; phy-supply = <®_3v3_etn>; status = "okay"; @@ -261,8 +295,9 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_mdio>; - interrupts-extended = <&gpio7 1 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&pinctrl_etnphy_int>; + interrupt-parent = <&gpio7>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; }; }; }; @@ -276,25 +311,34 @@ }; &i2c1 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; clock-frequency = <400000>; status = "okay"; ds1339: rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; + trickle-resistor-ohms = <250>; + trickle-diode-disable; }; }; &i2c3 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; clock-frequency = <400000>; status = "okay"; - sgtl5000: sgtl5000@0a { + sgtl5000: sgtl5000@a { compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; reg = <0x0a>; VDDA-supply = <®_2v5>; VDDIO-supply = <®_3v3>; @@ -332,8 +376,6 @@ pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ >; }; @@ -451,12 +493,24 @@ >; }; + pinctrl_etnphy_int: etnphy-intgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ + >; + }; + pinctrl_etnphy_power: etnphy-pwrgrp { fsl,pins = < MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */ >; }; + pinctrl_etnphy_rst: etnphy-rstgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 @@ -504,6 +558,13 @@ >; }; + pinctrl_i2c1_gpio: i2c1-gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 @@ -511,6 +572,13 @@ >; }; + pinctrl_i2c3_gpio: i2c3-gpiogrp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 + >; + }; + pinctrl_kpp: kppgrp { fsl,pins = < MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..6d8d9ca966460a162a7bd0513db9862be5be4560 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi @@ -0,0 +1,196 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include "imx6qdl-wandboard.dtsi" + +/ { + reg_eth_phy: regulator-eth-phy { + compatible = "regulator-fixed"; + regulator-name = "ETH_PHY"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 13 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pmic: pfuze100@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&fec { + phy-supply = <®_eth_phy>; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-wandboard { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x80000000 /* USB Power Enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USDHC1 CD */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f0b1 /* RGMII PHY reset */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index b4fa7f1d63da1e54b3a09108ff74fc0b80d7ccfb..ed96d7b5feabdb276de7f0750c25c5dba26d6c1c 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -82,7 +82,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index eeb7679fd348a4932d123a8bd7ec76fb5107cc63..7812fbac963c933f7247af8172a8bb17704761e0 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -390,7 +390,7 @@ clock-frequency = <100000>; status = "okay"; - pmic@08 { + pmic@8 { compatible = "fsl,pfuze100"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pfuze100_irq>; @@ -543,7 +543,7 @@ rmi4-f01@1 { reg = <0x1>; - syna,nosleep-mode = <1>; + syna,nosleep-mode = <2>; }; rmi4-f11@11 { @@ -728,6 +728,7 @@ &usbh1 { vbus-supply = <®_5p0v_main>; + disable-over-current; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 8884b4a3cafb6f979189ba4be89295ad3777bfee..1ce4eabf05904c21e0e8501795fe2927cab3c0bb 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -87,7 +87,7 @@ interrupt-parent = <&gpc>; ranges; - dma_apbh: dma-apbh@00110000 { + dma_apbh: dma-apbh@110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x00110000 0x2000>; interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>, @@ -100,7 +100,7 @@ clocks = <&clks IMX6QDL_CLK_APBH_DMA>; }; - gpmi: gpmi-nand@00112000 { + gpmi: gpmi-nand@112000 { compatible = "fsl,imx6q-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; @@ -120,7 +120,7 @@ status = "disabled"; }; - hdmi: hdmi@0120000 { + hdmi: hdmi@120000 { #address-cells = <1>; #size-cells = <0>; reg = <0x00120000 0x9000>; @@ -148,7 +148,7 @@ }; }; - gpu_3d: gpu@00130000 { + gpu_3d: gpu@130000 { compatible = "vivante,gc"; reg = <0x00130000 0x4000>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; @@ -159,7 +159,7 @@ power-domains = <&pd_pu>; }; - gpu_2d: gpu@00134000 { + gpu_2d: gpu@134000 { compatible = "vivante,gc"; reg = <0x00134000 0x4000>; interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; @@ -169,7 +169,7 @@ power-domains = <&pd_pu>; }; - timer@00a00600 { + timer@a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; interrupts = <1 13 0xf01>; @@ -177,7 +177,7 @@ clocks = <&clks IMX6QDL_CLK_TWD>; }; - intc: interrupt-controller@00a01000 { + intc: interrupt-controller@a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -186,7 +186,7 @@ interrupt-parent = <&intc>; }; - L2: l2-cache@00a02000 { + L2: l2-cache@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; @@ -229,21 +229,21 @@ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; }; - aips-bus@02000000 { /* AIPS1 */ + aips-bus@2000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; - spba-bus@02000000 { + spba-bus@2000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x40000>; ranges; - spdif: spdif@02004000 { + spdif: spdif@2004000 { compatible = "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; @@ -263,7 +263,7 @@ status = "disabled"; }; - ecspi1: ecspi@02008000 { + ecspi1: ecspi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -277,7 +277,7 @@ status = "disabled"; }; - ecspi2: ecspi@0200c000 { + ecspi2: ecspi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -291,7 +291,7 @@ status = "disabled"; }; - ecspi3: ecspi@02010000 { + ecspi3: ecspi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -305,7 +305,7 @@ status = "disabled"; }; - ecspi4: ecspi@02014000 { + ecspi4: ecspi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -319,7 +319,7 @@ status = "disabled"; }; - uart1: serial@02020000 { + uart1: serial@2020000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; @@ -331,7 +331,7 @@ status = "disabled"; }; - esai: esai@02024000 { + esai: esai@2024000 { #sound-dai-cells = <0>; compatible = "fsl,imx35-esai"; reg = <0x02024000 0x4000>; @@ -347,7 +347,7 @@ status = "disabled"; }; - ssi1: ssi@02028000 { + ssi1: ssi@2028000 { #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; @@ -363,7 +363,7 @@ status = "disabled"; }; - ssi2: ssi@0202c000 { + ssi2: ssi@202c000 { #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; @@ -379,7 +379,7 @@ status = "disabled"; }; - ssi3: ssi@02030000 { + ssi3: ssi@2030000 { #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; @@ -395,7 +395,7 @@ status = "disabled"; }; - asrc: asrc@02034000 { + asrc: asrc@2034000 { compatible = "fsl,imx53-asrc"; reg = <0x02034000 0x4000>; interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; @@ -420,12 +420,12 @@ status = "okay"; }; - spba@0203c000 { + spba@203c000 { reg = <0x0203c000 0x4000>; }; }; - vpu: vpu@02040000 { + vpu: vpu@2040000 { compatible = "cnm,coda960"; reg = <0x02040000 0x3c000>; interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>, @@ -439,11 +439,11 @@ iram = <&ocram>; }; - aipstz@0207c000 { /* AIPSTZ1 */ + aipstz@207c000 { /* AIPSTZ1 */ reg = <0x0207c000 0x4000>; }; - pwm1: pwm@02080000 { + pwm1: pwm@2080000 { #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; @@ -454,7 +454,7 @@ status = "disabled"; }; - pwm2: pwm@02084000 { + pwm2: pwm@2084000 { #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; @@ -465,7 +465,7 @@ status = "disabled"; }; - pwm3: pwm@02088000 { + pwm3: pwm@2088000 { #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; @@ -476,7 +476,7 @@ status = "disabled"; }; - pwm4: pwm@0208c000 { + pwm4: pwm@208c000 { #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; @@ -487,7 +487,7 @@ status = "disabled"; }; - can1: flexcan@02090000 { + can1: flexcan@2090000 { compatible = "fsl,imx6q-flexcan"; reg = <0x02090000 0x4000>; interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; @@ -497,7 +497,7 @@ status = "disabled"; }; - can2: flexcan@02094000 { + can2: flexcan@2094000 { compatible = "fsl,imx6q-flexcan"; reg = <0x02094000 0x4000>; interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; @@ -507,7 +507,7 @@ status = "disabled"; }; - gpt: gpt@02098000 { + gpt: gpt@2098000 { compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; @@ -517,7 +517,7 @@ clock-names = "ipg", "per", "osc_per"; }; - gpio1: gpio@0209c000 { + gpio1: gpio@209c000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x0209c000 0x4000>; interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>, @@ -528,7 +528,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio@020a0000 { + gpio2: gpio@20a0000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a0000 0x4000>; interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>, @@ -539,7 +539,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio@020a4000 { + gpio3: gpio@20a4000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a4000 0x4000>; interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>, @@ -550,7 +550,7 @@ #interrupt-cells = <2>; }; - gpio4: gpio@020a8000 { + gpio4: gpio@20a8000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a8000 0x4000>; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>, @@ -561,7 +561,7 @@ #interrupt-cells = <2>; }; - gpio5: gpio@020ac000 { + gpio5: gpio@20ac000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020ac000 0x4000>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>, @@ -572,7 +572,7 @@ #interrupt-cells = <2>; }; - gpio6: gpio@020b0000 { + gpio6: gpio@20b0000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020b0000 0x4000>; interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>, @@ -583,7 +583,7 @@ #interrupt-cells = <2>; }; - gpio7: gpio@020b4000 { + gpio7: gpio@20b4000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020b4000 0x4000>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>, @@ -594,7 +594,7 @@ #interrupt-cells = <2>; }; - kpp: kpp@020b8000 { + kpp: kpp@20b8000 { compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; @@ -602,14 +602,14 @@ status = "disabled"; }; - wdog1: wdog@020bc000 { + wdog1: wdog@20bc000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_DUMMY>; }; - wdog2: wdog@020c0000 { + wdog2: wdog@20c0000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; @@ -617,7 +617,7 @@ status = "disabled"; }; - clks: ccm@020c4000 { + clks: ccm@20c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, @@ -625,7 +625,7 @@ #clock-cells = <1>; }; - anatop: anatop@020c8000 { + anatop: anatop@20c8000 { compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, @@ -737,7 +737,7 @@ clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; - usbphy1: usbphy@020c9000 { + usbphy1: usbphy@20c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; @@ -745,7 +745,7 @@ fsl,anatop = <&anatop>; }; - usbphy2: usbphy@020ca000 { + usbphy2: usbphy@20ca000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; @@ -753,7 +753,7 @@ fsl,anatop = <&anatop>; }; - snvs: snvs@020cc000 { + snvs: snvs@20cc000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x020cc000 0x4000>; @@ -775,17 +775,17 @@ }; }; - epit1: epit@020d0000 { /* EPIT1 */ + epit1: epit@20d0000 { /* EPIT1 */ reg = <0x020d0000 0x4000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; }; - epit2: epit@020d4000 { /* EPIT2 */ + epit2: epit@20d4000 { /* EPIT2 */ reg = <0x020d4000 0x4000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; }; - src: src@020d8000 { + src: src@20d8000 { compatible = "fsl,imx6q-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>, @@ -793,7 +793,7 @@ #reset-cells = <1>; }; - gpc: gpc@020dc000 { + gpc: gpc@20dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupt-controller; @@ -826,9 +826,9 @@ }; }; - gpr: iomuxc-gpr@020e0000 { + gpr: iomuxc-gpr@20e0000 { compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd"; - reg = <0x020e0000 0x38>; + reg = <0x20e0000 0x38>; mux: mux-controller { compatible = "mmio-mux"; @@ -836,9 +836,9 @@ }; }; - iomuxc: iomuxc@020e0000 { + iomuxc: iomuxc@20e0000 { compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc"; - reg = <0x020e0000 0x4000>; + reg = <0x20e0000 0x4000>; }; ldb: ldb { @@ -895,17 +895,17 @@ }; }; - dcic1: dcic@020e4000 { + dcic1: dcic@20e4000 { reg = <0x020e4000 0x4000>; interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; }; - dcic2: dcic@020e8000 { + dcic2: dcic@20e8000 { reg = <0x020e8000 0x4000>; interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; }; - sdma: sdma@020ec000 { + sdma: sdma@20ec000 { compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; @@ -917,7 +917,7 @@ }; }; - aips-bus@02100000 { /* AIPS2 */ + aips-bus@2100000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -950,11 +950,11 @@ }; }; - aipstz@0217c000 { /* AIPSTZ2 */ + aipstz@217c000 { /* AIPSTZ2 */ reg = <0x0217c000 0x4000>; }; - usbotg: usb@02184000 { + usbotg: usb@2184000 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>; @@ -967,7 +967,7 @@ status = "disabled"; }; - usbh1: usb@02184200 { + usbh1: usb@2184200 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; @@ -981,7 +981,7 @@ status = "disabled"; }; - usbh2: usb@02184400 { + usbh2: usb@2184400 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; @@ -994,7 +994,7 @@ status = "disabled"; }; - usbh3: usb@02184600 { + usbh3: usb@2184600 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184600 0x200>; interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; @@ -1007,14 +1007,14 @@ status = "disabled"; }; - usbmisc: usbmisc@02184800 { + usbmisc: usbmisc@2184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; clocks = <&clks IMX6QDL_CLK_USBOH3>; }; - fec: ethernet@02188000 { + fec: ethernet@2188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts-extended = @@ -1027,14 +1027,14 @@ status = "disabled"; }; - mlb@0218c000 { + mlb@218c000 { reg = <0x0218c000 0x4000>; interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>, <0 117 IRQ_TYPE_LEVEL_HIGH>, <0 126 IRQ_TYPE_LEVEL_HIGH>; }; - usdhc1: usdhc@02190000 { + usdhc1: usdhc@2190000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; @@ -1046,7 +1046,7 @@ status = "disabled"; }; - usdhc2: usdhc@02194000 { + usdhc2: usdhc@2194000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; @@ -1058,7 +1058,7 @@ status = "disabled"; }; - usdhc3: usdhc@02198000 { + usdhc3: usdhc@2198000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; @@ -1070,7 +1070,7 @@ status = "disabled"; }; - usdhc4: usdhc@0219c000 { + usdhc4: usdhc@219c000 { compatible = "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; @@ -1082,7 +1082,7 @@ status = "disabled"; }; - i2c1: i2c@021a0000 { + i2c1: i2c@21a0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; @@ -1092,7 +1092,7 @@ status = "disabled"; }; - i2c2: i2c@021a4000 { + i2c2: i2c@21a4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; @@ -1102,7 +1102,7 @@ status = "disabled"; }; - i2c3: i2c@021a8000 { + i2c3: i2c@21a8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; @@ -1112,20 +1112,20 @@ status = "disabled"; }; - romcp@021ac000 { + romcp@21ac000 { reg = <0x021ac000 0x4000>; }; - mmdc0: mmdc@021b0000 { /* MMDC0 */ + mmdc0: mmdc@21b0000 { /* MMDC0 */ compatible = "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; }; - mmdc1: mmdc@021b4000 { /* MMDC1 */ + mmdc1: mmdc@21b4000 { /* MMDC1 */ reg = <0x021b4000 0x4000>; }; - weim: weim@021b8000 { + weim: weim@21b8000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,imx6q-weim"; @@ -1136,29 +1136,29 @@ status = "disabled"; }; - ocotp: ocotp@021bc000 { + ocotp: ocotp@21bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6QDL_CLK_IIM>; }; - tzasc@021d0000 { /* TZASC1 */ + tzasc@21d0000 { /* TZASC1 */ reg = <0x021d0000 0x4000>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; }; - tzasc@021d4000 { /* TZASC2 */ + tzasc@21d4000 { /* TZASC2 */ reg = <0x021d4000 0x4000>; interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; }; - audmux: audmux@021d8000 { + audmux: audmux@21d8000 { compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; status = "disabled"; }; - mipi_csi: mipi@021dc000 { + mipi_csi: mipi@21dc000 { compatible = "fsl,imx6-mipi-csi2"; reg = <0x021dc000 0x4000>; #address-cells = <1>; @@ -1171,7 +1171,7 @@ status = "disabled"; }; - mipi_dsi: mipi@021e0000 { + mipi_dsi: mipi@21e0000 { #address-cells = <1>; #size-cells = <0>; reg = <0x021e0000 0x4000>; @@ -1199,14 +1199,14 @@ }; }; - vdoa@021e4000 { + vdoa@21e4000 { compatible = "fsl,imx6q-vdoa"; reg = <0x021e4000 0x4000>; interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_VDOA>; }; - uart2: serial@021e8000 { + uart2: serial@21e8000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>; @@ -1218,7 +1218,7 @@ status = "disabled"; }; - uart3: serial@021ec000 { + uart3: serial@21ec000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; @@ -1230,7 +1230,7 @@ status = "disabled"; }; - uart4: serial@021f0000 { + uart4: serial@21f0000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; @@ -1242,7 +1242,7 @@ status = "disabled"; }; - uart5: serial@021f4000 { + uart5: serial@21f4000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; @@ -1255,7 +1255,7 @@ }; }; - ipu1: ipu@02400000 { + ipu1: ipu@2400000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ipu"; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..92b38e6699aafca6e9205f547880eb910b78f810 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp-tx6qp-8037.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-8037 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts new file mode 100644 index 0000000000000000000000000000000000000000..ffc0f2ee11d2378bc82904149ac1c7168477fc22 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts @@ -0,0 +1,86 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" + +/ { + model = "Ka-Ro electronics TX6QP-8037 Module"; + compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp"; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu2 { + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..07ad70718aec59fe2bd60bcf79311f0300168a1c --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts @@ -0,0 +1,57 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp-tx6qp-8137.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-8137 Module on MB7 baseboard"; + compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp"; +}; + +&ipu2 { + status = "disabled"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts new file mode 100644 index 0000000000000000000000000000000000000000..dd494d587014ec627d1a745002fa015ccd0f3f03 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts @@ -0,0 +1,90 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" + +/ { + model = "Ka-Ro electronics TX6QP-8137 Module"; + compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp"; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu2 { + status = "disabled"; +}; + +&sata { + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts new file mode 100644 index 0000000000000000000000000000000000000000..f7badd82ce8a9b4ba251d4e2ef0f2dbcf0280759 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts @@ -0,0 +1,26 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-wandboard-revd1.dtsi" + +/ { + model = "Wandboard i.MX6 QuadPlus Board revD1"; + compatible = "wand,imx6qp-wandboard", "fsl,imx6qp"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 299d863690c5dbbaded0a3b1bf05de9002b7cd3d..5f4fdce715c1941e24cab61074bfc8005db03a03 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -44,19 +44,19 @@ / { soc { - ocram2: sram@00940000 { + ocram2: sram@940000 { compatible = "mmio-sram"; reg = <0x00940000 0x20000>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - ocram3: sram@00960000 { + ocram3: sram@960000 { compatible = "mmio-sram"; reg = <0x00960000 0x20000>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips-bus@02100000 { + aips-bus@2100000 { pre1: pre@21c8000 { compatible = "fsl,imx6qp-pre"; reg = <0x021c8000 0x1000>; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 0a90eea17018aceed3268d3969de1cb7bbd2f435..60600b4cf5fed80b8426d47f688d583cb357881b 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -145,7 +145,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 3f76f980947ed6ecd88cb5a8b48cbfc3dc5bd63b..3ea1a41893c8bb578b7a7d0056bfbe32e2861246 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -76,7 +76,7 @@ }; }; - intc: interrupt-controller@00a01000 { + intc: interrupt-controller@a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -109,13 +109,13 @@ interrupt-parent = <&gpc>; ranges; - ocram: sram@00900000 { + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; clocks = <&clks IMX6SL_CLK_OCRAM>; }; - L2: l2-cache@00a02000 { + L2: l2-cache@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; @@ -130,21 +130,21 @@ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; }; - aips1: aips-bus@02000000 { + aips1: aips-bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; - spba: spba-bus@02000000 { + spba: spba-bus@2000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x40000>; ranges; - spdif: spdif@02004000 { + spdif: spdif@2004000 { compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; @@ -165,7 +165,7 @@ status = "disabled"; }; - ecspi1: ecspi@02008000 { + ecspi1: ecspi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -177,7 +177,7 @@ status = "disabled"; }; - ecspi2: ecspi@0200c000 { + ecspi2: ecspi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -189,7 +189,7 @@ status = "disabled"; }; - ecspi3: ecspi@02010000 { + ecspi3: ecspi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -201,7 +201,7 @@ status = "disabled"; }; - ecspi4: ecspi@02014000 { + ecspi4: ecspi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -213,7 +213,7 @@ status = "disabled"; }; - uart5: serial@02018000 { + uart5: serial@2018000 { compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02018000 0x4000>; @@ -226,7 +226,7 @@ status = "disabled"; }; - uart1: serial@02020000 { + uart1: serial@2020000 { compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; @@ -239,7 +239,7 @@ status = "disabled"; }; - uart2: serial@02024000 { + uart2: serial@2024000 { compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02024000 0x4000>; @@ -252,7 +252,7 @@ status = "disabled"; }; - ssi1: ssi@02028000 { + ssi1: ssi@2028000 { #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; @@ -268,7 +268,7 @@ status = "disabled"; }; - ssi2: ssi@0202c000 { + ssi2: ssi@202c000 { #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; @@ -284,7 +284,7 @@ status = "disabled"; }; - ssi3: ssi@02030000 { + ssi3: ssi@2030000 { #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; @@ -300,7 +300,7 @@ status = "disabled"; }; - uart3: serial@02034000 { + uart3: serial@2034000 { compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02034000 0x4000>; @@ -313,7 +313,7 @@ status = "disabled"; }; - uart4: serial@02038000 { + uart4: serial@2038000 { compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02038000 0x4000>; @@ -327,7 +327,7 @@ }; }; - pwm1: pwm@02080000 { + pwm1: pwm@2080000 { #pwm-cells = <2>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; @@ -337,7 +337,7 @@ clock-names = "ipg", "per"; }; - pwm2: pwm@02084000 { + pwm2: pwm@2084000 { #pwm-cells = <2>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; @@ -347,7 +347,7 @@ clock-names = "ipg", "per"; }; - pwm3: pwm@02088000 { + pwm3: pwm@2088000 { #pwm-cells = <2>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; @@ -357,7 +357,7 @@ clock-names = "ipg", "per"; }; - pwm4: pwm@0208c000 { + pwm4: pwm@208c000 { #pwm-cells = <2>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; @@ -367,7 +367,7 @@ clock-names = "ipg", "per"; }; - gpt: gpt@02098000 { + gpt: gpt@2098000 { compatible = "fsl,imx6sl-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; @@ -376,7 +376,7 @@ clock-names = "ipg", "per"; }; - gpio1: gpio@0209c000 { + gpio1: gpio@209c000 { compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; reg = <0x0209c000 0x4000>; interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>, @@ -393,7 +393,7 @@ <&iomuxc 27 64 4>, <&iomuxc 31 52 1>; }; - gpio2: gpio@020a0000 { + gpio2: gpio@20a0000 { compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; reg = <0x020a0000 0x4000>; interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>, @@ -411,7 +411,7 @@ <&iomuxc 23 125 7>, <&iomuxc 30 110 2>; }; - gpio3: gpio@020a4000 { + gpio3: gpio@20a4000 { compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; reg = <0x020a4000 0x4000>; interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>, @@ -430,7 +430,7 @@ <&iomuxc 31 102 1>; }; - gpio4: gpio@020a8000 { + gpio4: gpio@20a8000 { compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; reg = <0x020a8000 0x4000>; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>, @@ -456,7 +456,7 @@ <&iomuxc 30 152 1>, <&iomuxc 31 156 1>; }; - gpio5: gpio@020ac000 { + gpio5: gpio@20ac000 { compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; reg = <0x020ac000 0x4000>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>, @@ -478,7 +478,7 @@ <&iomuxc 21 161 1>; }; - kpp: kpp@020b8000 { + kpp: kpp@20b8000 { compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; @@ -486,14 +486,14 @@ status = "disabled"; }; - wdog1: wdog@020bc000 { + wdog1: wdog@20bc000 { compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_DUMMY>; }; - wdog2: wdog@020c0000 { + wdog2: wdog@20c0000 { compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; @@ -501,7 +501,7 @@ status = "disabled"; }; - clks: ccm@020c4000 { + clks: ccm@20c4000 { compatible = "fsl,imx6sl-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, @@ -509,7 +509,7 @@ #clock-cells = <1>; }; - anatop: anatop@020c8000 { + anatop: anatop@20c8000 { compatible = "fsl,imx6sl-anatop", "fsl,imx6q-anatop", "syscon", "simple-bus"; @@ -623,7 +623,7 @@ clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; }; - usbphy1: usbphy@020c9000 { + usbphy1: usbphy@20c9000 { compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; @@ -631,7 +631,7 @@ fsl,anatop = <&anatop>; }; - usbphy2: usbphy@020ca000 { + usbphy2: usbphy@20ca000 { compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; @@ -639,7 +639,7 @@ fsl,anatop = <&anatop>; }; - snvs: snvs@020cc000 { + snvs: snvs@20cc000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x020cc000 0x4000>; @@ -661,17 +661,17 @@ }; }; - epit1: epit@020d0000 { + epit1: epit@20d0000 { reg = <0x020d0000 0x4000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; }; - epit2: epit@020d4000 { + epit2: epit@20d4000 { reg = <0x020d4000 0x4000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; }; - src: src@020d8000 { + src: src@20d8000 { compatible = "fsl,imx6sl-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>, @@ -679,7 +679,7 @@ #reset-cells = <1>; }; - gpc: gpc@020dc000 { + gpc: gpc@20dc000 { compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupt-controller; @@ -692,28 +692,28 @@ #power-domain-cells = <1>; }; - gpr: iomuxc-gpr@020e0000 { + gpr: iomuxc-gpr@20e0000 { compatible = "fsl,imx6sl-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x020e0000 0x38>; }; - iomuxc: iomuxc@020e0000 { + iomuxc: iomuxc@20e0000 { compatible = "fsl,imx6sl-iomuxc"; reg = <0x020e0000 0x4000>; }; - csi: csi@020e4000 { + csi: csi@20e4000 { reg = <0x020e4000 0x4000>; interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; }; - spdc: spdc@020e8000 { + spdc: spdc@20e8000 { reg = <0x020e8000 0x4000>; interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; }; - sdma: sdma@020ec000 { + sdma: sdma@20ec000 { compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; @@ -725,17 +725,17 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; }; - pxp: pxp@020f0000 { + pxp: pxp@20f0000 { reg = <0x020f0000 0x4000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; }; - epdc: epdc@020f4000 { + epdc: epdc@20f4000 { reg = <0x020f4000 0x4000>; interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; }; - lcdif: lcdif@020f8000 { + lcdif: lcdif@20f8000 { compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif"; reg = <0x020f8000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; @@ -746,7 +746,7 @@ status = "disabled"; }; - dcp: dcp@020fc000 { + dcp: dcp@20fc000 { compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; reg = <0x020fc000 0x4000>; interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>, @@ -755,14 +755,14 @@ }; }; - aips2: aips-bus@02100000 { + aips2: aips-bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - usbotg1: usb@02184000 { + usbotg1: usb@2184000 { compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>; @@ -775,7 +775,7 @@ status = "disabled"; }; - usbotg2: usb@02184200 { + usbotg2: usb@2184200 { compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; @@ -788,7 +788,7 @@ status = "disabled"; }; - usbh: usb@02184400 { + usbh: usb@2184400 { compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; @@ -801,14 +801,14 @@ status = "disabled"; }; - usbmisc: usbmisc@02184800 { + usbmisc: usbmisc@2184800 { #index-cells = <1>; compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; clocks = <&clks IMX6SL_CLK_USBOH3>; }; - fec: ethernet@02188000 { + fec: ethernet@2188000 { compatible = "fsl,imx6sl-fec", "fsl,imx25-fec"; reg = <0x02188000 0x4000>; interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>; @@ -818,7 +818,7 @@ status = "disabled"; }; - usdhc1: usdhc@02190000 { + usdhc1: usdhc@2190000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; @@ -830,7 +830,7 @@ status = "disabled"; }; - usdhc2: usdhc@02194000 { + usdhc2: usdhc@2194000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; @@ -842,7 +842,7 @@ status = "disabled"; }; - usdhc3: usdhc@02198000 { + usdhc3: usdhc@2198000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; @@ -854,7 +854,7 @@ status = "disabled"; }; - usdhc4: usdhc@0219c000 { + usdhc4: usdhc@219c000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; @@ -866,7 +866,7 @@ status = "disabled"; }; - i2c1: i2c@021a0000 { + i2c1: i2c@21a0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; @@ -876,7 +876,7 @@ status = "disabled"; }; - i2c2: i2c@021a4000 { + i2c2: i2c@21a4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; @@ -886,7 +886,7 @@ status = "disabled"; }; - i2c3: i2c@021a8000 { + i2c3: i2c@21a8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; @@ -896,17 +896,17 @@ status = "disabled"; }; - mmdc: mmdc@021b0000 { + mmdc: mmdc@21b0000 { compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; }; - rngb: rngb@021b4000 { + rngb: rngb@21b4000 { reg = <0x021b4000 0x4000>; interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; }; - weim: weim@021b8000 { + weim: weim@21b8000 { #address-cells = <2>; #size-cells = <1>; reg = <0x021b8000 0x4000>; @@ -915,13 +915,13 @@ status = "disabled"; }; - ocotp: ocotp@021bc000 { + ocotp: ocotp@21bc000 { compatible = "fsl,imx6sl-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SL_CLK_OCOTP>; }; - audmux: audmux@021d8000 { + audmux: audmux@21d8000 { compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index c5578d1c1ee4d126a2b2f156af02b0a4f29a1888..f9d40ee149824186442a0d4d8352f4ed9d59aaf1 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -231,7 +231,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index 71005478cdf06f29e9a0f4a04215e02d32fdba22..e3533e74ccc84bbaa0dbf82aae7d9f5c408102dc 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -18,7 +18,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index c0139d7e497ab3b525f3de8a891e6b47f1eb4dfa..6dd9bebfe027834fe445fad8408280e9cbf51ef3 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -18,7 +18,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze200"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts new file mode 100644 index 0000000000000000000000000000000000000000..4d8c6521845fd74849fcb7029fc03ec3f47a806c --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -0,0 +1,572 @@ +/* + * Copyright (C) 2016 Christoph Fritz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include +#include +#include "imx6sx.dtsi" + +/ { + model = "Softing VIN|ING 2000"; + compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + reg_usb_otg1_vbus: regulator-usb_otg1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_peri_3v3: regulator-peri_3v3 { + compatible = "regulator-fixed"; + regulator-name = "peri_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pwmleds { + compatible = "pwm-leds"; + + red { + label = "red"; + max-brightness = <255>; + pwms = <&pwm6 0 50000>; + }; + + green { + label = "green"; + max-brightness = <255>; + pwms = <&pwm2 0 50000>; + }; + + blue { + label = "blue"; + max-brightness = <255>; + pwms = <&pwm1 0 50000>; + }; + }; +}; + +&adc1 { + vref-supply = <®_peri_3v3>; + status = "okay"; +}; + +&cpu0 { + /* + * This board has a shared rail of reg_arm and reg_soc (supplied by + * sw1a_reg) which is modeled below, but still this module behaves + * unstable without higher voltages. Hence, set higher voltages here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-supply = <®_peri_3v3>; + phy-reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + phy-reset-duration = <5>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet0-phy@0 { + reg = <0>; + max-speed = <100>; + interrupt-parent = <&gpio2>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-supply = <®_peri_3v3>; + phy-reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <5>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet1-phy@0 { + reg = <0>; + max-speed = <100>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + proximity: sx9500@28 { + compatible = "semtech,sx9500"; + reg = <0x28>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sx9500>; + interrupt-parent = <&gpio2>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + }; + + pmic: pfuze100@8 { + compatible = "fsl,pfuze200"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpios>; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x130b1 + MX6SX_PAD_SD3_DATA3__ECSPI4_MISO 0x130b1 + MX6SX_PAD_SD3_CMD__ECSPI4_MOSI 0x130b1 + MX6SX_PAD_SD3_DATA2__GPIO7_IO_4 0x30b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x30c1 + MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x30c1 + MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0f9 + MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0f9 + MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x30c1 + MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0f9 + MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4000a038 + /* LAN8720 PHY Reset */ + MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9 0x10b0 + /* MDIO */ + MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0f9 + MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0f9 + /* IRQ from PHY */ + MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x10b0 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x1b0b0 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x1b0b0 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x1b0b0 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x1b0b0 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x1b0b0 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x1b0b0 + MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4000a038 + /* LAN8720 PHY Reset */ + MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21 0x10b0 + /* MDIO */ + MX6SX_PAD_ENET1_COL__ENET2_MDC 0xa0f9 + MX6SX_PAD_ENET1_CRS__ENET2_MDIO 0xa0f9 + /* IRQ from PHY */ + MX6SX_PAD_KEY_ROW4__GPIO2_IO_19 0x10b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0 + MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0 + MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0 + >; + }; + + pinctrl_gpios: gpiosgrp { + fsl,pins = < + /* reset external uC */ + MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x10b0 + /* IRQ from external uC */ + MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x10b0 + /* overcurrent detection */ + MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8 0x10b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 + MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SX_PAD_NAND_ALE__I2C3_SDA 0x4001b8b1 + MX6SX_PAD_NAND_CLE__I2C3_SCL 0x4001b8b1 + >; + }; + + pinctrl_pwm1: pwm1grp-1 { + fsl,pins = < + /* blue LED */ + MX6SX_PAD_RGMII2_RD3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp-1 { + fsl,pins = < + /* green LED */ + MX6SX_PAD_RGMII2_RD2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm6: pwm6grp-1 { + fsl,pins = < + /* red LED */ + MX6SX_PAD_RGMII2_TD2__PWM6_OUT 0x1b0b1 + >; + }; + + pinctrl_sx9500: sx9500grp { + fsl,pins = < + /* Reset */ + MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x838 + /* IRQ */ + MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x70e0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2_50mhz: usdhc2grp-50mhz { + fsl,pins = < + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 + MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28 0x1b000 + MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26 0x10b0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + fsl,pins = < + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100b9 + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170b9 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170b9 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170b9 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170b9 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + fsl,pins = < + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100f9 + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170f9 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170f9 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170f9 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170f9 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc4_50mhz: usdhc4grp-50mhz { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17059 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17059 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17059 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17059 + MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17068 + >; + }; + + pinctrl_usdhc4_100mhz: usdhc4-100mhz { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc4_200mhz: usdhc4-200mhz { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9 + >; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm6>; + status = "okay"; +}; + +®_arm { + vin-supply = <&sw1a_reg>; +}; + +®_soc { + vin-supply = <&sw1a_reg>; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_50mhz>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + cd-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc4 { + /* hs200-mode is currently unsupported because Vccq is on 3.1V, but + * not on necessary 1.8V. + */ + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc4_50mhz>; + pinctrl-1 = <&pinctrl_usdhc4_100mhz>; + pinctrl-2 = <&pinctrl_usdhc4_200mhz>; + bus-width = <8>; + keep-power-in-suspend; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi index dcfc9759143375decd12bea87ad5e7547837f3bd..53b3eac94f0de605606260e111c7980887349d3c 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -135,7 +135,7 @@ clock-frequency = <100000>; status = "okay"; - pmic: pmic@08 { + pmic: pmic@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 6c7eb54be9e2a4912d27cd4dcc2803a338390323..5b03ba3beda9e91d47d1bf7ad8e5ed25fc1f347d 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -95,7 +95,7 @@ }; }; - intc: interrupt-controller@00a01000 { + intc: interrupt-controller@a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -153,13 +153,13 @@ interrupts = ; }; - ocram: sram@00900000 { + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; clocks = <&clks IMX6SX_CLK_OCRAM>; }; - L2: l2-cache@00a02000 { + L2: l2-cache@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = ; @@ -169,7 +169,7 @@ arm,data-latency = <4 2 3>; }; - gpu: gpu@01800000 { + gpu: gpu@1800000 { compatible = "vivante,gc"; reg = <0x01800000 0x4000>; interrupts = ; @@ -179,7 +179,7 @@ clock-names = "bus", "core", "shader"; }; - dma_apbh: dma-apbh@01804000 { + dma_apbh: dma-apbh@1804000 { compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x01804000 0x2000>; interrupts = , @@ -192,7 +192,7 @@ clocks = <&clks IMX6SX_CLK_APBH_DMA>; }; - gpmi: gpmi-nand@01806000{ + gpmi: gpmi-nand@1806000{ compatible = "fsl,imx6sx-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; @@ -212,21 +212,21 @@ status = "disabled"; }; - aips1: aips-bus@02000000 { + aips1: aips-bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; - spba-bus@02000000 { + spba-bus@2000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x40000>; ranges; - spdif: spdif@02004000 { + spdif: spdif@2004000 { compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; interrupts = ; @@ -248,7 +248,7 @@ status = "disabled"; }; - ecspi1: ecspi@02008000 { + ecspi1: ecspi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -260,7 +260,7 @@ status = "disabled"; }; - ecspi2: ecspi@0200c000 { + ecspi2: ecspi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -272,7 +272,7 @@ status = "disabled"; }; - ecspi3: ecspi@02010000 { + ecspi3: ecspi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -284,7 +284,7 @@ status = "disabled"; }; - ecspi4: ecspi@02014000 { + ecspi4: ecspi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -296,7 +296,7 @@ status = "disabled"; }; - uart1: serial@02020000 { + uart1: serial@2020000 { compatible = "fsl,imx6sx-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; @@ -309,7 +309,7 @@ status = "disabled"; }; - esai: esai@02024000 { + esai: esai@2024000 { reg = <0x02024000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_ESAI_IPG>, @@ -322,7 +322,7 @@ status = "disabled"; }; - ssi1: ssi@02028000 { + ssi1: ssi@2028000 { #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; @@ -336,7 +336,7 @@ status = "disabled"; }; - ssi2: ssi@0202c000 { + ssi2: ssi@202c000 { #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; @@ -350,7 +350,7 @@ status = "disabled"; }; - ssi3: ssi@02030000 { + ssi3: ssi@2030000 { #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; @@ -364,7 +364,7 @@ status = "disabled"; }; - asrc: asrc@02034000 { + asrc: asrc@2034000 { reg = <0x02034000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_ASRC_MEM>, @@ -381,7 +381,7 @@ }; }; - pwm1: pwm@02080000 { + pwm1: pwm@2080000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = ; @@ -391,7 +391,7 @@ #pwm-cells = <2>; }; - pwm2: pwm@02084000 { + pwm2: pwm@2084000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = ; @@ -401,7 +401,7 @@ #pwm-cells = <2>; }; - pwm3: pwm@02088000 { + pwm3: pwm@2088000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = ; @@ -411,7 +411,7 @@ #pwm-cells = <2>; }; - pwm4: pwm@0208c000 { + pwm4: pwm@208c000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = ; @@ -421,7 +421,7 @@ #pwm-cells = <2>; }; - flexcan1: can@02090000 { + flexcan1: can@2090000 { compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; reg = <0x02090000 0x4000>; interrupts = ; @@ -431,7 +431,7 @@ status = "disabled"; }; - flexcan2: can@02094000 { + flexcan2: can@2094000 { compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; reg = <0x02094000 0x4000>; interrupts = ; @@ -441,7 +441,7 @@ status = "disabled"; }; - gpt: gpt@02098000 { + gpt: gpt@2098000 { compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt"; reg = <0x02098000 0x4000>; interrupts = ; @@ -450,7 +450,7 @@ clock-names = "ipg", "per"; }; - gpio1: gpio@0209c000 { + gpio1: gpio@209c000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x0209c000 0x4000>; interrupts = , @@ -462,7 +462,7 @@ gpio-ranges = <&iomuxc 0 5 26>; }; - gpio2: gpio@020a0000 { + gpio2: gpio@20a0000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x020a0000 0x4000>; interrupts = , @@ -474,7 +474,7 @@ gpio-ranges = <&iomuxc 0 31 20>; }; - gpio3: gpio@020a4000 { + gpio3: gpio@20a4000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x020a4000 0x4000>; interrupts = , @@ -486,7 +486,7 @@ gpio-ranges = <&iomuxc 0 51 29>; }; - gpio4: gpio@020a8000 { + gpio4: gpio@20a8000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x020a8000 0x4000>; interrupts = , @@ -498,7 +498,7 @@ gpio-ranges = <&iomuxc 0 80 32>; }; - gpio5: gpio@020ac000 { + gpio5: gpio@20ac000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x020ac000 0x4000>; interrupts = , @@ -510,7 +510,7 @@ gpio-ranges = <&iomuxc 0 112 24>; }; - gpio6: gpio@020b0000 { + gpio6: gpio@20b0000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x020b0000 0x4000>; interrupts = , @@ -522,7 +522,7 @@ gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>; }; - gpio7: gpio@020b4000 { + gpio7: gpio@20b4000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x020b4000 0x4000>; interrupts = , @@ -534,7 +534,7 @@ gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>; }; - kpp: kpp@020b8000 { + kpp: kpp@20b8000 { compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = ; @@ -542,14 +542,14 @@ status = "disabled"; }; - wdog1: wdog@020bc000 { + wdog1: wdog@20bc000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_DUMMY>; }; - wdog2: wdog@020c0000 { + wdog2: wdog@20c0000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = ; @@ -557,7 +557,7 @@ status = "disabled"; }; - clks: ccm@020c4000 { + clks: ccm@20c4000 { compatible = "fsl,imx6sx-ccm"; reg = <0x020c4000 0x4000>; interrupts = , @@ -567,7 +567,7 @@ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; }; - anatop: anatop@020c8000 { + anatop: anatop@20c8000 { compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop", "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; @@ -675,11 +675,12 @@ compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; interrupts = ; fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; }; - usbphy1: usbphy@020c9000 { + usbphy1: usbphy@20c9000 { compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = ; @@ -687,7 +688,7 @@ fsl,anatop = <&anatop>; }; - usbphy2: usbphy@020ca000 { + usbphy2: usbphy@20ca000 { compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = ; @@ -695,7 +696,7 @@ fsl,anatop = <&anatop>; }; - snvs: snvs@020cc000 { + snvs: snvs@20cc000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x020cc000 0x4000>; @@ -724,17 +725,17 @@ }; }; - epit1: epit@020d0000 { + epit1: epit@20d0000 { reg = <0x020d0000 0x4000>; interrupts = ; }; - epit2: epit@020d4000 { + epit2: epit@20d4000 { reg = <0x020d4000 0x4000>; interrupts = ; }; - src: src@020d8000 { + src: src@20d8000 { compatible = "fsl,imx6sx-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = , @@ -742,7 +743,7 @@ #reset-cells = <1>; }; - gpc: gpc@020dc000 { + gpc: gpc@20dc000 { compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupt-controller; @@ -751,18 +752,18 @@ interrupt-parent = <&intc>; }; - iomuxc: iomuxc@020e0000 { + iomuxc: iomuxc@20e0000 { compatible = "fsl,imx6sx-iomuxc"; reg = <0x020e0000 0x4000>; }; - gpr: iomuxc-gpr@020e4000 { + gpr: iomuxc-gpr@20e4000 { compatible = "fsl,imx6sx-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x020e4000 0x4000>; }; - sdma: sdma@020ec000 { + sdma: sdma@20ec000 { compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = ; @@ -775,7 +776,7 @@ }; }; - aips2: aips-bus@02100000 { + aips2: aips-bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -809,7 +810,7 @@ }; }; - usbotg1: usb@02184000 { + usbotg1: usb@2184000 { compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = ; @@ -823,7 +824,7 @@ status = "disabled"; }; - usbotg2: usb@02184200 { + usbotg2: usb@2184200 { compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = ; @@ -836,7 +837,7 @@ status = "disabled"; }; - usbh: usb@02184400 { + usbh: usb@2184400 { compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = ; @@ -851,14 +852,14 @@ status = "disabled"; }; - usbmisc: usbmisc@02184800 { + usbmisc: usbmisc@2184800 { #index-cells = <1>; compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; clocks = <&clks IMX6SX_CLK_USBOH3>; }; - fec1: ethernet@02188000 { + fec1: ethernet@2188000 { compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = , @@ -875,7 +876,7 @@ status = "disabled"; }; - mlb: mlb@0218c000 { + mlb: mlb@218c000 { reg = <0x0218c000 0x4000>; interrupts = , , @@ -884,7 +885,7 @@ status = "disabled"; }; - usdhc1: usdhc@02190000 { + usdhc1: usdhc@2190000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x02190000 0x4000>; interrupts = ; @@ -896,7 +897,7 @@ status = "disabled"; }; - usdhc2: usdhc@02194000 { + usdhc2: usdhc@2194000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x02194000 0x4000>; interrupts = ; @@ -908,7 +909,7 @@ status = "disabled"; }; - usdhc3: usdhc@02198000 { + usdhc3: usdhc@2198000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x02198000 0x4000>; interrupts = ; @@ -920,7 +921,7 @@ status = "disabled"; }; - usdhc4: usdhc@0219c000 { + usdhc4: usdhc@219c000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x0219c000 0x4000>; interrupts = ; @@ -932,7 +933,7 @@ status = "disabled"; }; - i2c1: i2c@021a0000 { + i2c1: i2c@21a0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; @@ -942,7 +943,7 @@ status = "disabled"; }; - i2c2: i2c@021a4000 { + i2c2: i2c@21a4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; @@ -952,7 +953,7 @@ status = "disabled"; }; - i2c3: i2c@021a8000 { + i2c3: i2c@21a8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; @@ -962,12 +963,12 @@ status = "disabled"; }; - mmdc: mmdc@021b0000 { + mmdc: mmdc@21b0000 { compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; }; - fec2: ethernet@021b4000 { + fec2: ethernet@21b4000 { compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; reg = <0x021b4000 0x4000>; interrupts = , @@ -982,7 +983,7 @@ status = "disabled"; }; - weim: weim@021b8000 { + weim: weim@21b8000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim"; @@ -993,13 +994,23 @@ status = "disabled"; }; - ocotp: ocotp@021bc000 { + ocotp: ocotp@21bc000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,imx6sx-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SX_CLK_OCOTP>; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; }; - sai1: sai@021d4000 { + sai1: sai@21d4000 { compatible = "fsl,imx6sx-sai"; reg = <0x021d4000 0x4000>; interrupts = ; @@ -1012,13 +1023,13 @@ status = "disabled"; }; - audmux: audmux@021d8000 { + audmux: audmux@21d8000 { compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; status = "disabled"; }; - sai2: sai@021dc000 { + sai2: sai@21dc000 { compatible = "fsl,imx6sx-sai"; reg = <0x021dc000 0x4000>; interrupts = ; @@ -1031,7 +1042,7 @@ status = "disabled"; }; - qspi1: qspi@021e0000 { + qspi1: qspi@21e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-qspi"; @@ -1044,7 +1055,7 @@ status = "disabled"; }; - qspi2: qspi@021e4000 { + qspi2: qspi@21e4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-qspi"; @@ -1057,7 +1068,7 @@ status = "disabled"; }; - uart2: serial@021e8000 { + uart2: serial@21e8000 { compatible = "fsl,imx6sx-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; @@ -1070,7 +1081,7 @@ status = "disabled"; }; - uart3: serial@021ec000 { + uart3: serial@21ec000 { compatible = "fsl,imx6sx-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; @@ -1083,7 +1094,7 @@ status = "disabled"; }; - uart4: serial@021f0000 { + uart4: serial@21f0000 { compatible = "fsl,imx6sx-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; @@ -1096,7 +1107,7 @@ status = "disabled"; }; - uart5: serial@021f4000 { + uart5: serial@21f4000 { compatible = "fsl,imx6sx-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; @@ -1109,7 +1120,7 @@ status = "disabled"; }; - i2c4: i2c@021f8000 { + i2c4: i2c@21f8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; @@ -1120,21 +1131,21 @@ }; }; - aips3: aips-bus@02200000 { + aips3: aips-bus@2200000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02200000 0x100000>; ranges; - spba-bus@02200000 { + spba-bus@2200000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02240000 0x40000>; ranges; - csi1: csi@02214000 { + csi1: csi@2214000 { reg = <0x02214000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, @@ -1144,7 +1155,7 @@ status = "disabled"; }; - pxp: pxp@02218000 { + pxp: pxp@2218000 { reg = <0x02218000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_PXP_AXI>, @@ -1153,7 +1164,7 @@ status = "disabled"; }; - csi2: csi@0221c000 { + csi2: csi@221c000 { reg = <0x0221c000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, @@ -1163,7 +1174,7 @@ status = "disabled"; }; - lcdif1: lcdif@02220000 { + lcdif1: lcdif@2220000 { compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02220000 0x4000>; interrupts = ; @@ -1174,7 +1185,7 @@ status = "disabled"; }; - lcdif2: lcdif@02224000 { + lcdif2: lcdif@2224000 { compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02224000 0x4000>; interrupts = ; @@ -1185,7 +1196,7 @@ status = "disabled"; }; - vadc: vadc@02228000 { + vadc: vadc@2228000 { reg = <0x02228000 0x4000>, <0x0222c000 0x4000>; reg-names = "vadc-vafe", "vadc-vdec"; clocks = <&clks IMX6SX_CLK_VADC>, @@ -1195,7 +1206,7 @@ }; }; - adc1: adc@02280000 { + adc1: adc@2280000 { compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; reg = <0x02280000 0x4000>; interrupts = ; @@ -1206,7 +1217,7 @@ status = "disabled"; }; - adc2: adc@02284000 { + adc2: adc@2284000 { compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; reg = <0x02284000 0x4000>; interrupts = ; @@ -1217,7 +1228,7 @@ status = "disabled"; }; - wdog3: wdog@02288000 { + wdog3: wdog@2288000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x02288000 0x4000>; interrupts = ; @@ -1225,7 +1236,7 @@ status = "disabled"; }; - ecspi5: ecspi@0228c000 { + ecspi5: ecspi@228c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -1237,7 +1248,7 @@ status = "disabled"; }; - uart6: serial@022a0000 { + uart6: serial@22a0000 { compatible = "fsl,imx6sx-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x022a0000 0x4000>; @@ -1250,7 +1261,7 @@ status = "disabled"; }; - pwm5: pwm@022a4000 { + pwm5: pwm@22a4000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x022a4000 0x4000>; interrupts = ; @@ -1260,7 +1271,7 @@ #pwm-cells = <2>; }; - pwm6: pwm@022a8000 { + pwm6: pwm@22a8000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x022a8000 0x4000>; interrupts = ; @@ -1270,7 +1281,7 @@ #pwm-cells = <2>; }; - pwm7: pwm@022ac000 { + pwm7: pwm@22ac000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x022ac000 0x4000>; interrupts = ; @@ -1280,7 +1291,7 @@ #pwm-cells = <2>; }; - pwm8: pwm@0022b0000 { + pwm8: pwm@22b0000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x0022b0000 0x4000>; interrupts = ; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 9c23e017d86ad9194d48d7ef3bdb767210fd8dee..e5d3ef88be608562b057ba1fa337bd04f7ed08e0 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -147,6 +147,8 @@ &lcdif { + assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 7d7254b12a7563788ff85812437d8f5dab79336b..3bf26ebd4df9fa3b63bb28e7bf2c713caa0609e0 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -175,7 +175,7 @@ reg = <1>; max-speed = <100>; interrupt-parent = <&gpio5>; - interrupts = <6 IRQ_TYPE_LEVEL_LOW 0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; }; }; }; @@ -186,7 +186,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze3000@08 { + pmic: pfuze3000@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; @@ -223,7 +223,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { reg = <0x0a>; compatible = "fsl,sgtl5000"; clocks = <&sys_mclk>; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts index 28d055e3f3010fef8964f1aad5606cca1824e2e5..2d80f7b50bc03bce0ddc66d855ac4f8199644353 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts +++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts @@ -116,7 +116,7 @@ }; &i2c2 { - /delete-node/ codec@0a; + /delete-node/ codec@a; /delete-node/ touchscreen@48; rtc: mcp7940x@6f { diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index ec745eb3b6a853b1aab6eb7faab14c30e68bcdf7..65111f9843f4eaf715f0446e6ba8f70389c38cc1 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -362,7 +362,7 @@ clock-frequency = <400000>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; #sound-dai-cells = <0>; @@ -424,7 +424,7 @@ display = <&display>; status = "okay"; - display: display@di0 { + display: disp0 { bits-per-pixel = <32>; bus-width = <24>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index f11a241a340d52b6cf95b184b69696e13e29c88d..d5181f85ca9cafbba955ca1a3a6e5fbaedf9248f 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -98,7 +98,7 @@ }; }; - intc: interrupt-controller@00a01000 { + intc: interrupt-controller@a01000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -149,12 +149,12 @@ status = "disabled"; }; - ocram: sram@00900000 { + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; }; - dma_apbh: dma-apbh@01804000 { + dma_apbh: dma-apbh@1804000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x01804000 0x2000>; interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>, @@ -167,7 +167,7 @@ clocks = <&clks IMX6UL_CLK_APBHDMA>; }; - gpmi: gpmi-nand@01806000 { + gpmi: gpmi-nand@1806000 { compatible = "fsl,imx6q-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; @@ -187,21 +187,21 @@ status = "disabled"; }; - aips1: aips-bus@02000000 { + aips1: aips-bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; - spba-bus@02000000 { + spba-bus@2000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x40000>; ranges; - ecspi1: ecspi@02008000 { + ecspi1: ecspi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -213,7 +213,7 @@ status = "disabled"; }; - ecspi2: ecspi@0200c000 { + ecspi2: ecspi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -225,7 +225,7 @@ status = "disabled"; }; - ecspi3: ecspi@02010000 { + ecspi3: ecspi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -237,7 +237,7 @@ status = "disabled"; }; - ecspi4: ecspi@02014000 { + ecspi4: ecspi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -249,7 +249,7 @@ status = "disabled"; }; - uart7: serial@02018000 { + uart7: serial@2018000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x02018000 0x4000>; @@ -260,7 +260,7 @@ status = "disabled"; }; - uart1: serial@02020000 { + uart1: serial@2020000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x02020000 0x4000>; @@ -271,7 +271,7 @@ status = "disabled"; }; - uart8: serial@02024000 { + uart8: serial@2024000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x02024000 0x4000>; @@ -282,7 +282,7 @@ status = "disabled"; }; - sai1: sai@02028000 { + sai1: sai@2028000 { #sound-dai-cells = <0>; compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; reg = <0x02028000 0x4000>; @@ -297,7 +297,7 @@ status = "disabled"; }; - sai2: sai@0202c000 { + sai2: sai@202c000 { #sound-dai-cells = <0>; compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; reg = <0x0202c000 0x4000>; @@ -312,7 +312,7 @@ status = "disabled"; }; - sai3: sai@02030000 { + sai3: sai@2030000 { #sound-dai-cells = <0>; compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; reg = <0x02030000 0x4000>; @@ -328,7 +328,7 @@ }; }; - tsc: tsc@02040000 { + tsc: tsc@2040000 { compatible = "fsl,imx6ul-tsc"; reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; interrupts = , @@ -339,7 +339,7 @@ status = "disabled"; }; - pwm1: pwm@02080000 { + pwm1: pwm@2080000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = ; @@ -350,7 +350,7 @@ status = "disabled"; }; - pwm2: pwm@02084000 { + pwm2: pwm@2084000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = ; @@ -361,7 +361,7 @@ status = "disabled"; }; - pwm3: pwm@02088000 { + pwm3: pwm@2088000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = ; @@ -372,7 +372,7 @@ status = "disabled"; }; - pwm4: pwm@0208c000 { + pwm4: pwm@208c000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = ; @@ -383,7 +383,7 @@ status = "disabled"; }; - can1: flexcan@02090000 { + can1: flexcan@2090000 { compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; reg = <0x02090000 0x4000>; interrupts = ; @@ -393,7 +393,7 @@ status = "disabled"; }; - can2: flexcan@02094000 { + can2: flexcan@2094000 { compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; reg = <0x02094000 0x4000>; interrupts = ; @@ -403,7 +403,7 @@ status = "disabled"; }; - gpt1: gpt@02098000 { + gpt1: gpt@2098000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x02098000 0x4000>; interrupts = ; @@ -412,7 +412,7 @@ clock-names = "ipg", "per"; }; - gpio1: gpio@0209c000 { + gpio1: gpio@209c000 { compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; reg = <0x0209c000 0x4000>; interrupts = , @@ -425,7 +425,7 @@ <&iomuxc 16 33 16>; }; - gpio2: gpio@020a0000 { + gpio2: gpio@20a0000 { compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; reg = <0x020a0000 0x4000>; interrupts = , @@ -437,7 +437,7 @@ gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>; }; - gpio3: gpio@020a4000 { + gpio3: gpio@20a4000 { compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; reg = <0x020a4000 0x4000>; interrupts = , @@ -449,7 +449,7 @@ gpio-ranges = <&iomuxc 0 65 29>; }; - gpio4: gpio@020a8000 { + gpio4: gpio@20a8000 { compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; reg = <0x020a8000 0x4000>; interrupts = , @@ -461,7 +461,7 @@ gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>; }; - gpio5: gpio@020ac000 { + gpio5: gpio@20ac000 { compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; reg = <0x020ac000 0x4000>; interrupts = , @@ -473,7 +473,7 @@ gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>; }; - fec2: ethernet@020b4000 { + fec2: ethernet@20b4000 { compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; reg = <0x020b4000 0x4000>; interrupts = , @@ -490,7 +490,7 @@ status = "disabled"; }; - kpp: kpp@020b8000 { + kpp: kpp@20b8000 { compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = ; @@ -498,14 +498,14 @@ status = "disabled"; }; - wdog1: wdog@020bc000 { + wdog1: wdog@20bc000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = ; clocks = <&clks IMX6UL_CLK_WDOG1>; }; - wdog2: wdog@020c0000 { + wdog2: wdog@20c0000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = ; @@ -513,7 +513,7 @@ status = "disabled"; }; - clks: ccm@020c4000 { + clks: ccm@20c4000 { compatible = "fsl,imx6ul-ccm"; reg = <0x020c4000 0x4000>; interrupts = , @@ -523,7 +523,7 @@ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; }; - anatop: anatop@020c8000 { + anatop: anatop@20c8000 { compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; @@ -580,7 +580,7 @@ }; }; - usbphy1: usbphy@020c9000 { + usbphy1: usbphy@20c9000 { compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = ; @@ -589,7 +589,7 @@ fsl,anatop = <&anatop>; }; - usbphy2: usbphy@020ca000 { + usbphy2: usbphy@20ca000 { compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = ; @@ -598,7 +598,16 @@ fsl,anatop = <&anatop>; }; - snvs: snvs@020cc000 { + tempmon: tempmon { + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; + interrupts = ; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + }; + + snvs: snvs@20cc000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x020cc000 0x4000>; @@ -628,17 +637,17 @@ }; }; - epit1: epit@020d0000 { + epit1: epit@20d0000 { reg = <0x020d0000 0x4000>; interrupts = ; }; - epit2: epit@020d4000 { + epit2: epit@20d4000 { reg = <0x020d4000 0x4000>; interrupts = ; }; - src: src@020d8000 { + src: src@20d8000 { compatible = "fsl,imx6ul-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = , @@ -646,7 +655,7 @@ #reset-cells = <1>; }; - gpc: gpc@020dc000 { + gpc: gpc@20dc000 { compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupt-controller; @@ -655,18 +664,18 @@ interrupt-parent = <&intc>; }; - iomuxc: iomuxc@020e0000 { + iomuxc: iomuxc@20e0000 { compatible = "fsl,imx6ul-iomuxc"; reg = <0x020e0000 0x4000>; }; - gpr: iomuxc-gpr@020e4000 { + gpr: iomuxc-gpr@20e4000 { compatible = "fsl,imx6ul-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x020e4000 0x4000>; }; - gpt2: gpt@020e8000 { + gpt2: gpt@20e8000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x020e8000 0x4000>; interrupts = ; @@ -675,7 +684,7 @@ clock-names = "ipg", "per"; }; - sdma: sdma@020ec000 { + sdma: sdma@20ec000 { compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; @@ -687,7 +696,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; }; - pwm5: pwm@020f0000 { + pwm5: pwm@20f0000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020f0000 0x4000>; interrupts = ; @@ -698,7 +707,7 @@ status = "disabled"; }; - pwm6: pwm@020f4000 { + pwm6: pwm@20f4000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020f4000 0x4000>; interrupts = ; @@ -709,7 +718,7 @@ status = "disabled"; }; - pwm7: pwm@020f8000 { + pwm7: pwm@20f8000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020f8000 0x4000>; interrupts = ; @@ -720,7 +729,7 @@ status = "disabled"; }; - pwm8: pwm@020fc000 { + pwm8: pwm@20fc000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020fc000 0x4000>; interrupts = ; @@ -732,14 +741,14 @@ }; }; - aips2: aips-bus@02100000 { + aips2: aips-bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - usbotg1: usb@02184000 { + usbotg1: usb@2184000 { compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = ; @@ -753,7 +762,7 @@ status = "disabled"; }; - usbotg2: usb@02184200 { + usbotg2: usb@2184200 { compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = ; @@ -766,13 +775,13 @@ status = "disabled"; }; - usbmisc: usbmisc@02184800 { + usbmisc: usbmisc@2184800 { #index-cells = <1>; compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; }; - fec1: ethernet@02188000 { + fec1: ethernet@2188000 { compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = , @@ -789,7 +798,7 @@ status = "disabled"; }; - usdhc1: usdhc@02190000 { + usdhc1: usdhc@2190000 { compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; reg = <0x02190000 0x4000>; interrupts = ; @@ -801,7 +810,7 @@ status = "disabled"; }; - usdhc2: usdhc@02194000 { + usdhc2: usdhc@2194000 { compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; reg = <0x02194000 0x4000>; interrupts = ; @@ -813,7 +822,7 @@ status = "disabled"; }; - adc1: adc@02198000 { + adc1: adc@2198000 { compatible = "fsl,imx6ul-adc", "fsl,vf610-adc"; reg = <0x02198000 0x4000>; interrupts = ; @@ -825,7 +834,7 @@ status = "disabled"; }; - i2c1: i2c@021a0000 { + i2c1: i2c@21a0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; @@ -835,7 +844,7 @@ status = "disabled"; }; - i2c2: i2c@021a4000 { + i2c2: i2c@21a4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; @@ -845,7 +854,7 @@ status = "disabled"; }; - i2c3: i2c@021a8000 { + i2c3: i2c@21a8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; @@ -855,18 +864,28 @@ status = "disabled"; }; - mmdc: mmdc@021b0000 { + mmdc: mmdc@21b0000 { compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; }; - ocotp: ocotp-ctrl@021bc000 { + ocotp: ocotp-ctrl@21bc000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,imx6ul-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6UL_CLK_OCOTP>; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; }; - lcdif: lcdif@021c8000 { + lcdif: lcdif@21c8000 { compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; reg = <0x021c8000 0x4000>; interrupts = ; @@ -877,7 +896,7 @@ status = "disabled"; }; - qspi: qspi@021e0000 { + qspi: qspi@21e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi"; @@ -890,7 +909,7 @@ status = "disabled"; }; - uart2: serial@021e8000 { + uart2: serial@21e8000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x021e8000 0x4000>; @@ -901,7 +920,7 @@ status = "disabled"; }; - uart3: serial@021ec000 { + uart3: serial@21ec000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x021ec000 0x4000>; @@ -912,7 +931,7 @@ status = "disabled"; }; - uart4: serial@021f0000 { + uart4: serial@21f0000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x021f0000 0x4000>; @@ -923,7 +942,7 @@ status = "disabled"; }; - uart5: serial@021f4000 { + uart5: serial@21f4000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x021f4000 0x4000>; @@ -934,7 +953,7 @@ status = "disabled"; }; - i2c4: i2c@021f8000 { + i2c4: i2c@21f8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; @@ -944,7 +963,7 @@ status = "disabled"; }; - uart6: serial@021fc000 { + uart6: serial@21fc000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x021fc000 0x4000>; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 0a3915868aa328fc4bafa4650ecf9085ce85b8df..bb5bf94f1a3295f38ca5497a1e11e1a8646e1045 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -121,7 +121,7 @@ pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; #sound-dai-cells = <0>; reg = <0x0a>; diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index e7998308861fa395477bfbced53706e810a5e40b..2b05898bb3f68805d0ac801f42ddceb3644b3c8e 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -181,7 +181,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze3000@08 { + pmic: pfuze3000@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts index e78c2c9cc28a919f51cbc7fc815dba5aafca69e1..508328b2a6bf4375f880a43b00575f7fd84b14fa 100644 --- a/arch/arm/boot/dts/imx7d-pico.dts +++ b/arch/arm/boot/dts/imx7d-pico.dts @@ -52,6 +52,17 @@ reg = <0x80000000 0x80000000>; }; + reg_ap6212: regulator-ap6212 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_ap6212>; + regulator-name = "AP6212"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_2p5v: regulator-2p5v { compatible = "regulator-fixed"; regulator-name = "2P5V"; @@ -137,7 +148,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { #sound-dai-cells = <0>; reg = <0x0a>; compatible = "fsl,sgtl5000"; @@ -152,7 +163,7 @@ pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; - pmic: pfuze3000@08 { + pmic: pfuze3000@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; @@ -271,6 +282,17 @@ status = "okay"; }; +&usdhc2 { /* Wifi SDIO */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_ap6212>; + status = "okay"; +}; + &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -326,6 +348,12 @@ >; }; + pinctrl_reg_ap6212: regap6212grp { + fsl,pins = < + MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x59 + >; + }; + pinctrl_sai1: sai1grp { fsl,pins = < MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f @@ -348,6 +376,17 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x59 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 44637cabcc566d402847992607984f9736db5a27..a7a5dc7b270083ffc6172a5d4cd499f74a7c67d6 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -241,7 +241,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze3000@08 { + pmic: pfuze3000@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index 07b63f8b7314595980f928e06c68ee8e602a6111..9bdf121f7e4358840c969b859d683ed25f321529 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -122,7 +122,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze3000@08 { + pmic: pfuze3000@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; @@ -226,7 +226,7 @@ pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { #sound-dai-cells = <0>; reg = <0x0a>; compatible = "fsl,sgtl5000"; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 380f9ae60c78856f083dbd1370f80cc92dbbda1a..4d58638d104b4b7060398500b51be5f79c04a51d 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -11,7 +11,7 @@ reg = <0x10000000 0x200>; /* Use core module LED to indicate CPU load */ - led@0c.0 { + led@c.0 { compatible = "register-bit-led"; offset = <0x0c>; mask = <0x01>; @@ -100,7 +100,7 @@ compatible = "syscon", "simple-mfd"; reg = <0x1a000000 0x10>; - led@04.0 { + led@4.0 { compatible = "register-bit-led"; offset = <0x04>; mask = <0x01>; @@ -108,21 +108,21 @@ linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@04.1 { + led@4.1 { compatible = "register-bit-led"; offset = <0x04>; mask = <0x02>; label = "integrator:yellow"; default-state = "off"; }; - led@04.2 { + led@4.2 { compatible = "register-bit-led"; offset = <0x04>; mask = <0x04>; label = "integrator:red"; default-state = "off"; }; - led@04.3 { + led@4.3 { compatible = "register-bit-led"; offset = <0x04>; mask = <0x08>; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index a5d88a213dcda47c0756a53dc6c516dffeb4455b..94d2ff9836d00367a086f01a69bb16acd95008dd 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -154,21 +154,26 @@ }; pci: pciv3@62000000 { - compatible = "v3,v360epc-pci"; + compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0x62000000 0x10000>; + /* Bridge registers and config access space */ + reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; interrupt-parent = <&pic>; interrupts = <17>; /* Bus error IRQ */ - ranges = <0x00000000 0 0x61000000 /* config space */ - 0x61000000 0 0x00100000 /* 16 MiB @ 61000000 */ - 0x01000000 0 0x0 /* I/O space */ - 0x60000000 0 0x00100000 /* 16 MiB @ 60000000 */ - 0x02000000 0 0x00000000 /* non-prefectable memory */ - 0x40000000 0 0x10000000 /* 256 MiB @ 40000000 */ - 0x42000000 0 0x10000000 /* prefetchable memory */ - 0x50000000 0 0x10000000>; /* 256 MiB @ 50000000 */ + clocks = <&pciclk>; + bus-range = <0x00 0xff>; + ranges = <0x01000000 0 0x0000000 /* I/O space @00000000 */ + 0x60000000 0 0x00010000 /* 64 KB @ LB 60000000 */ + 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ + 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ + 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ + 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ + dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ + 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */ + 0x02000000 0 0x80000000 /* Core module alias memory */ + 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */ interrupt-map-mask = <0xf800 0 0 0x7>; interrupt-map = < /* IDSEL 9 */ diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..efd8af9242d12fcfc909d33bd99e8729acf2cfee --- /dev/null +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -0,0 +1,152 @@ +/* + * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + aliases { + serial0 = &scif0; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + vcc_sdhi1: regulator-vcc-sdhi1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy@3 { + reg = <3>; + micrel,led-mode = <1>; + }; +}; + +&hsusb { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc@68 { + compatible = "ti,bq32000"; + reg = <0x68>; + }; +}; + +&pci0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&pfc { + avb_pins: avb { + groups = "avb_mdio", "avb_gmii"; + function = "avb"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2"; + function = "i2c2"; + }; + + scif0_pins: scif0 { + groups = "scif0_data_d"; + function = "scif0"; + }; + + sdhi1_pins: sd1 { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..31fab5f183a9c008ee27b70f9cc6ee30057f1d3f --- /dev/null +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi @@ -0,0 +1,43 @@ +/* + * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + aliases { + serial1 = &scif1; + serial4 = &hscif1; + }; +}; + +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&pfc { + hscif1_pins: hscif1 { + groups = "hscif1_data_c", "hscif1_ctrl_c"; + function = "hscif1"; + }; + + scif1_pins: scif1 { + groups = "scif1_data_d"; + function = "scif1"; + }; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 819ab83459163963a80c9471c1b61c7eca422311..6b796b52ff4f8497eca86db917ce52102e4c8312 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -88,7 +88,7 @@ }; }; - msm_ram: msmram@0c000000 { + msm_ram: msmram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x200000>; ranges = <0x0 0x0c000000 0x200000>; @@ -100,7 +100,7 @@ }; }; - psc: power-sleep-controller@02350000 { + psc: power-sleep-controller@2350000 { pscrst: reset-controller { compatible = "ti,k2e-pscrst", "ti,syscon-reset"; #reset-cells = <1>; @@ -111,7 +111,7 @@ }; }; - dspgpio0: keystone_dsp_gpio@02620240 { + dspgpio0: keystone_dsp_gpio@2620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index f462f1043531682f2c00dcc9f287dad5df8dd03e..656af194a518263c08474bb45c162badb907d5c0 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -45,6 +45,22 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + ecap0_pins: ecap0_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4) /* pr1_mdio_data.ecap0_in_apwm0_out */ + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_scs0.spi1_scs0 */ + K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_clk.spi1_clk */ + K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_miso.spi1_miso */ + K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_mosi.spi1_mosi */ + >; + }; + }; &k2g_pinctrl { @@ -81,6 +97,14 @@ K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */ >; }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + >; + }; + }; &uart0 { @@ -112,3 +136,72 @@ memory-region = <&dsp_common_memory>; status = "okay"; }; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c1024"; + reg = <0x50>; + }; +}; + +&keystone_usb0 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; + status = "okay"; +}; + +&keystone_usb1 { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&ecap0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins>; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi_nor: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <5000000>; + m25p,fast-read; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@1 { + label = "misc"; + reg = <0x100000 0xf00000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index 826b286665e62491bc85dccf65f0528cc425512c..8f313ff406b9f9a416e0b1e9182f0ecfcd29d373 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -28,6 +28,9 @@ aliases { serial0 = &uart0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; rproc0 = &dsp0; }; @@ -42,7 +45,7 @@ }; }; - gic: interrupt-controller@02561000 { + gic: interrupt-controller@2561000 { compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -80,7 +83,7 @@ ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; - msm_ram: msmram@0c000000 { + msm_ram: msmram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x100000>; ranges = <0x0 0x0c000000 0x100000>; @@ -92,19 +95,19 @@ }; }; - k2g_pinctrl: pinmux@02621000 { + k2g_pinctrl: pinmux@2621000 { compatible = "pinctrl-single"; reg = <0x02621000 0x410>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x001b0007>; }; - devctrl: device-state-control@02620000 { + devctrl: device-state-control@2620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; }; - uart0: serial@02530c00 { + uart0: serial@2530c00 { compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; @@ -115,7 +118,7 @@ status = "disabled"; }; - dcan0: can@0260B200 { + dcan0: can@260b200 { compatible = "ti,am4372-d_can", "ti,am3352-d_can"; reg = <0x0260B200 0x200>; interrupts = ; @@ -124,7 +127,7 @@ clocks = <&k2g_clks 0x0008 1>; }; - dcan1: can@0260B400 { + dcan1: can@260b400 { compatible = "ti,am4372-d_can", "ti,am3352-d_can"; reg = <0x0260B400 0x200>; interrupts = ; @@ -133,7 +136,40 @@ clocks = <&k2g_clks 0x0009 1>; }; - kirq0: keystone_irq@026202a0 { + i2c0: i2c@2530000 { + compatible = "ti,keystone-i2c"; + reg = <0x02530000 0x400>; + clocks = <&k2g_clks 0x003a 0>; + power-domains = <&k2g_pds 0x003a>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@2530400 { + compatible = "ti,keystone-i2c"; + reg = <0x02530400 0x400>; + clocks = <&k2g_clks 0x003b 0>; + power-domains = <&k2g_pds 0x003b>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@2530800 { + compatible = "ti,keystone-i2c"; + reg = <0x02530800 0x400>; + clocks = <&k2g_clks 0x003c 0>; + power-domains = <&k2g_pds 0x003c>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + kirq0: keystone_irq@26202a0 { compatible = "ti,keystone-irq"; interrupts = ; interrupt-controller; @@ -141,7 +177,7 @@ ti,syscon-dev = <&devctrl 0x2a0>; }; - dspgpio0: keystone_dsp_gpio@02620240 { + dspgpio0: keystone_dsp_gpio@2620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; #gpio-cells = <2>; @@ -164,7 +200,7 @@ status = "disabled"; }; - msgmgr: msgmgr@02a00000 { + msgmgr: msgmgr@2a00000 { compatible = "ti,k2g-message-manager"; #mbox-cells = <2>; reg-names = "queue_proxy_region", @@ -176,7 +212,7 @@ ; }; - pmmc: pmmc@02921c00 { + pmmc: pmmc@2921c00 { compatible = "ti,k2g-sci"; /* * In case of rare platforms that does not use k2g as @@ -246,7 +282,7 @@ clock-names = "gpio"; }; - edma0: edma@02700000 { + edma0: edma@2700000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; reg = <0x02700000 0x8000>; reg-names = "edma3_cc"; @@ -265,19 +301,19 @@ power-domains = <&k2g_pds 0x3f>; }; - edma0_tptc0: tptc@02760000 { + edma0_tptc0: tptc@2760000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x02760000 0x400>; power-domains = <&k2g_pds 0x3f>; }; - edma0_tptc1: tptc@02768000 { + edma0_tptc1: tptc@2768000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x02768000 0x400>; power-domains = <&k2g_pds 0x3f>; }; - edma1: edma@02728000 { + edma1: edma@2728000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; reg = <0x02728000 0x8000>; reg-names = "edma3_cc"; @@ -300,13 +336,13 @@ power-domains = <&k2g_pds 0x4f>; }; - edma1_tptc0: tptc@027b0000 { + edma1_tptc0: tptc@27b0000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x027b0000 0x400>; power-domains = <&k2g_pds 0x4f>; }; - edma1_tptc1: tptc@027b8000 { + edma1_tptc1: tptc@27b8000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x027b8000 0x400>; power-domains = <&k2g_pds 0x4f>; @@ -343,5 +379,177 @@ clock-names = "fck", "mmchsdb_fck"; status = "disabled"; }; + + mcasp0: mcasp@2340000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x02340000 0x2000>, + <0x21804000 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma0 24 1>, <&edma0 25 1>; + dma-names = "tx", "rx"; + power-domains = <&k2g_pds 0x4>; + clocks = <&k2g_clks 0x4 0>; + clock-names = "fck"; + status = "disabled"; + }; + + mcasp1: mcasp@2342000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x02342000 0x2000>, + <0x21804400 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma1 48 1>, <&edma1 49 1>; + dma-names = "tx", "rx"; + power-domains = <&k2g_pds 0x5>; + clocks = <&k2g_clks 0x5 0>; + clock-names = "fck"; + status = "disabled"; + }; + + mcasp2: mcasp@2344000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x02344000 0x2000>, + <0x21804800 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma1 50 1>, <&edma1 51 1>; + dma-names = "tx", "rx"; + power-domains = <&k2g_pds 0x6>; + clocks = <&k2g_clks 0x6 0>; + clock-names = "fck"; + status = "disabled"; + }; + + usb0_phy: usb-phy@0 { + compatible = "usb-nop-xceiv"; + status = "disabled"; + }; + + keystone_usb0: keystone-dwc3@2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000>; + interrupts = ; + ranges; + dma-coherent; + dma-ranges; + status = "disabled"; + power-domains = <&k2g_pds 0x0016>; + + usb0: usb@2690000 { + compatible = "snps,dwc3"; + reg = <0x2690000 0x10000>; + interrupts = ; + maximum-speed = "high-speed"; + dr_mode = "otg"; + usb-phy = <&usb0_phy>; + status = "disabled"; + }; + }; + + usb1_phy: usb-phy@1 { + compatible = "usb-nop-xceiv"; + status = "disabled"; + }; + + keystone_usb1: keystone-dwc3@2580000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2580000 0x10000>; + interrupts = ; + ranges; + dma-coherent; + dma-ranges; + status = "disabled"; + power-domains = <&k2g_pds 0x0017>; + + usb1: usb@2590000 { + compatible = "snps,dwc3"; + reg = <0x2590000 0x10000>; + interrupts = ; + maximum-speed = "high-speed"; + dr_mode = "otg"; + usb-phy = <&usb1_phy>; + status = "disabled"; + }; + }; + + ecap0: pwm@21d1800 { + compatible = "ti,k2g-ecap", "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x021d1800 0x60>; + power-domains = <&k2g_pds 0x38>; + clocks = <&k2g_clks 0x38 0>; + clock-names = "fck"; + status = "disabled"; + }; + + ecap1: pwm@21d1c00 { + compatible = "ti,k2g-ecap", "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x021d1c00 0x60>; + power-domains = <&k2g_pds 0x39>; + clocks = <&k2g_clks 0x39 0x0>; + clock-names = "fck"; + status = "disabled"; + }; + + spi0: spi@21805400 { + compatible = "ti,keystone-spi"; + reg = <0x21805400 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k2g_pds 0x0010>; + clocks = <&k2g_clks 0x0010 0>; + }; + + spi1: spi@21805800 { + compatible = "ti,keystone-spi"; + reg = <0x21805800 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k2g_pds 0x0011>; + clocks = <&k2g_clks 0x0011 0>; + }; + + spi2: spi@21805c00 { + compatible = "ti,keystone-spi"; + reg = <0x21805C00 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k2g_pds 0x0012>; + clocks = <&k2g_clks 0x0012 0>; + }; + + spi3: spi@21806000 { + compatible = "ti,keystone-spi"; + reg = <0x21806000 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k2g_pds 0x0013>; + clocks = <&k2g_clks 0x0013 0>; + }; }; }; diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi index 31dc00e4e5fd8ce1124c48e575b9772804a0798f..7c486d9dc90ed38d8c268f1dc9048ddd58ad3766 100644 --- a/arch/arm/boot/dts/keystone-k2hk.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk.dtsi @@ -59,7 +59,7 @@ soc { /include/ "keystone-k2hk-clocks.dtsi" - msm_ram: msmram@0c000000 { + msm_ram: msmram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x600000>; ranges = <0x0 0x0c000000 0x600000>; @@ -71,7 +71,7 @@ }; }; - psc: power-sleep-controller@02350000 { + psc: power-sleep-controller@2350000 { pscrst: reset-controller { compatible = "ti,k2hk-pscrst", "ti,syscon-reset"; #reset-cells = <1>; @@ -89,7 +89,7 @@ }; }; - dspgpio0: keystone_dsp_gpio@02620240 { + dspgpio0: keystone_dsp_gpio@2620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; #gpio-cells = <2>; @@ -273,7 +273,7 @@ status = "disabled"; }; - mdio: mdio@02090300 { + mdio: mdio@2090300 { compatible = "ti,keystone_mdio", "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index 4431310bc922bf3c6e4de97f4bcd0dc2ee262056..4370e6513aa4ff23c5e0b01c03250b9de2401b76 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -43,7 +43,7 @@ soc { /include/ "keystone-k2l-clocks.dtsi" - uart2: serial@02348400 { + uart2: serial@2348400 { compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; @@ -53,7 +53,7 @@ interrupts = ; }; - uart3: serial@02348800 { + uart3: serial@2348800 { compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; @@ -63,7 +63,7 @@ interrupts = ; }; - k2l_pmx: pinmux@02620690 { + k2l_pmx: pinmux@2620690 { compatible = "pinctrl-single"; reg = <0x02620690 0xc>; #address-cells = <1>; @@ -213,7 +213,7 @@ }; }; - msm_ram: msmram@0c000000 { + msm_ram: msmram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x200000>; ranges = <0x0 0x0c000000 0x200000>; @@ -225,7 +225,7 @@ }; }; - psc: power-sleep-controller@02350000 { + psc: power-sleep-controller@2350000 { pscrst: reset-controller { compatible = "ti,k2l-pscrst", "ti,syscon-reset"; #reset-cells = <1>; @@ -247,7 +247,7 @@ clocks = <&clkosr>; }; - dspgpio0: keystone_dsp_gpio@02620240 { + dspgpio0: keystone_dsp_gpio@2620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 8dd74f48a6d3720119153745bdea67f629d19c29..06e10544f9b11b4fb41b35beb2d1542435cf83f2 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -78,17 +78,17 @@ ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; - pllctrl: pll-controller@02310000 { + pllctrl: pll-controller@2310000 { compatible = "ti,keystone-pllctrl", "syscon"; reg = <0x02310000 0x200>; }; - psc: power-sleep-controller@02350000 { + psc: power-sleep-controller@2350000 { compatible = "syscon", "simple-mfd"; reg = <0x02350000 0x1000>; }; - devctrl: device-state-control@02620000 { + devctrl: device-state-control@2620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; }; @@ -102,7 +102,7 @@ /include/ "keystone-clocks.dtsi" - uart0: serial@02530c00 { + uart0: serial@2530c00 { compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; @@ -112,7 +112,7 @@ interrupts = ; }; - uart1: serial@02531000 { + uart1: serial@2531000 { compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; @@ -214,7 +214,7 @@ }; }; - wdt: wdt@022f0080 { + wdt: wdt@22f0080 { compatible = "ti,keystone-wdt","ti,davinci-wdt"; reg = <0x022f0080 0x80>; clocks = <&clkwdtimer0>; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 65e9524e852ab0570e72330fc8a5eabfb4fe173f..210d21a65bd13b9a7f09bf2cf73a644b0044db66 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -208,32 +208,32 @@ spi-max-frequency = <20000000>; mode = <0>; - partition@00000000 { + partition@0 { reg = <0x00000000 0x00080000>; label = "RedBoot"; }; - partition@00080000 { + partition@80000 { reg = <0x00080000 0x00200000>; label = "zImage"; }; - partition@00280000 { + partition@280000 { reg = <0x00280000 0x00140000>; label = "rd.gz"; }; - partition@003c0000 { + partition@3c0000 { reg = <0x003c0000 0x00010000>; label = "vendor"; }; - partition@003d0000 { + partition@3d0000 { reg = <0x003d0000 0x00020000>; label = "RedBoot config"; }; - partition@003f0000 { + partition@3f0000 { reg = <0x003f0000 0x00010000>; label = "FIS directory"; }; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 4faea1d9facf1058d6bdcc073a9eafabda893163..a88eb22070a1b714ca74a5384e3302b2806166b7 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -45,29 +45,29 @@ spi-max-frequency = <20000000>; mode = <0>; - partition@0000000 { + partition@0 { reg = <0x00000000 0x00080000>; label = "U-Boot"; }; - partition@00200000 { + partition@200000 { reg = <0x00200000 0x00200000>; label = "Kernel"; }; - partition@00400000 { + partition@400000 { reg = <0x00400000 0x00900000>; label = "RootFS1"; }; - partition@00d00000 { + partition@d00000 { reg = <0x00d00000 0x00300000>; label = "RootFS2"; }; - partition@00040000 { + partition@40000 { reg = <0x00080000 0x00040000>; label = "U-Boot Config"; }; - partition@000c0000 { + partition@c0000 { reg = <0x000c0000 0x00140000>; label = "NAS Config"; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index a70fc7f01fc391e619710c1e17871aadd9e77454..eb2bf74096559b006d3f75af15ca6183a78d8eb5 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -41,7 +41,7 @@ pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ - nand: nand@012f { + nand: nand@12f { #address-cells = <1>; #size-cells = <1>; cle = <0>; @@ -57,7 +57,7 @@ status = "disabled"; }; - crypto_sram: sa-sram@0301 { + crypto_sram: sa-sram@301 { compatible = "mmio-sram"; reg = ; clocks = <&gate_clk 17>; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index 38faa90007d7f0c7e3042a90aef486321cc4bfa0..2fa5eb4bd4029facce1217e34f266b02daeb987f 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -72,7 +72,8 @@ }; &gpmc { - ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ + 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ ethernet@gpmc { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 26cce4d18405d5c993377ed7a246d7c80b43dcea..29cb804d10cc7d8ad9c37b13296d31bdf0f83ffe 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -33,11 +33,12 @@ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */ + #phy-cells = <0>; }; }; &gpmc { - ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { compatible = "ti,omap2-nand"; @@ -121,7 +122,7 @@ &mmc3 { interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; - pinctrl-0 = <&mmc3_pins>; + pinctrl-0 = <&mmc3_pins &wl127x_gpio>; pinctrl-names = "default"; vmmc-supply = <&wl12xx_vmmc>; non-removable; @@ -132,8 +133,8 @@ wlcore: wlcore@2 { compatible = "ti,wl1273"; reg = <2>; - interrupt-parent = <&gpio5>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */ ref-clock-frequency = <26000000>; }; }; @@ -157,8 +158,6 @@ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ - OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ - OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */ >; @@ -228,6 +227,12 @@ OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ >; }; + wl127x_gpio: pinmux_wl127x_gpio_pin { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ + >; + }; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/lpc3250-ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts index 52b3ed10283a7a5dabca56341d623a60017420dc..c43adb7b4d7ca5e342f628d2890ef99c6901a5f8 100644 --- a/arch/arm/boot/dts/lpc3250-ea3250.dts +++ b/arch/arm/boot/dts/lpc3250-ea3250.dts @@ -231,24 +231,24 @@ #address-cells = <1>; #size-cells = <1>; - mtd0@00000000 { + mtd0@0 { label = "ea3250-boot"; reg = <0x00000000 0x00080000>; read-only; }; - mtd1@00080000 { + mtd1@80000 { label = "ea3250-uboot"; reg = <0x00080000 0x000c0000>; read-only; }; - mtd2@00140000 { + mtd2@140000 { label = "ea3250-kernel"; reg = <0x00140000 0x00400000>; }; - mtd3@00540000 { + mtd3@540000 { label = "ea3250-rootfs"; reg = <0x00540000 0x07ac0000>; }; diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts index fd95e2b10357755478f544075bb2ac30d3ace486..c72eb9845603a25d0968ae07730e2b6d2faa11b7 100644 --- a/arch/arm/boot/dts/lpc3250-phy3250.dts +++ b/arch/arm/boot/dts/lpc3250-phy3250.dts @@ -154,29 +154,29 @@ #address-cells = <1>; #size-cells = <1>; - mtd0@00000000 { + mtd0@0 { label = "phy3250-boot"; reg = <0x00000000 0x00064000>; read-only; }; - mtd1@00064000 { + mtd1@64000 { label = "phy3250-uboot"; reg = <0x00064000 0x00190000>; read-only; }; - mtd2@001f4000 { + mtd2@1f4000 { label = "phy3250-ubt-prms"; reg = <0x001f4000 0x00010000>; }; - mtd3@00204000 { + mtd3@204000 { label = "phy3250-kernel"; reg = <0x00204000 0x00400000>; }; - mtd4@00604000 { + mtd4@604000 { label = "phy3250-rootfs"; reg = <0x00604000 0x039fc000>; }; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index d81fe433e3c82eafa0ea1703a5b6fe7905e6f7ac..abff7ef7c9cd6a571a5966ff75f473215c737233 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -55,7 +55,7 @@ <0x20000000 0x20000000 0x30000000>, <0xe0000000 0xe0000000 0x04000000>; - iram: sram@08000000 { + iram: sram@8000000 { compatible = "mmio-sram"; reg = <0x08000000 0x20000>; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index cd6ad072e72c17ebe287b72d3f26657a402a97ba..0d9faf1a51eac0cca63b54cb272bb1c57e8261d2 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -80,6 +80,11 @@ #size-cells = <1>; ranges = <0x0 0xc1100000 0x200000>; + assist: assist@7c00 { + compatible = "amlogic,meson-mx-assist", "syscon"; + reg = <0x7c00 0x200>; + }; + hwrng: rng@8100 { compatible = "amlogic,meson-rng"; reg = <0x8100 0x8>; @@ -160,6 +165,15 @@ status = "disabled"; }; + sdio: mmc@8c20 { + compatible = "amlogic,meson-mx-sdio"; + reg = <0x8c20 0x20>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spifc: spi@8c80 { compatible = "amlogic,meson6-spifc"; reg = <0x8c80 0x80>; @@ -168,6 +182,15 @@ status = "disabled"; }; + gpio_intc: interrupt-controller@9880 { + compatible = "amlogic,meson-gpio-intc"; + reg = <0x9880 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + status = "disabled"; + }; + wdt: watchdog@9900 { compatible = "amlogic,meson6-wdt"; reg = <0x9900 0x8>; @@ -217,7 +240,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xc9040000 0x40000>; - interrupts = ; + interrupts = ; phys = <&usb0_phy>; phy-names = "usb2-phy"; dr_mode = "host"; @@ -229,7 +252,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xc90c0000 0x40000>; - interrupts = ; + interrupts = ; phys = <&usb1_phy>; phy-names = "usb2-phy"; dr_mode = "host"; @@ -252,5 +275,25 @@ #size-cells = <1>; ranges = <0 0xd9000000 0x20000>; }; + + bootrom: bootrom@d9040000 { + compatible = "amlogic,meson-mx-bootrom", "syscon"; + reg = <0xd9040000 0x10000>; + }; + + secbus: secbus@da000000 { + compatible = "simple-bus"; + reg = <0xda000000 0x6000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xda000000 0x6000>; + + efuse: nvmem@0 { + compatible = "amlogic,meson6-efuse"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; }; }; /* end of / */ diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index ef281d2900527703af28b49f425df50415d1bd2d..9b463211339f5f5bc9156e88da3881607ba22ecc 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -84,6 +84,9 @@ }; }; /* end of / */ +&efuse { + status = "disabled"; +}; &uart_AO { clocks = <&xtal>, <&clk81>, <&clk81>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index b98d44fde6b60bc9301a3b23cb65f2ccd0d8e64c..2d7a0752a460886de27f1a280169538f95422f9f 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -45,6 +45,7 @@ #include #include +#include #include "meson.dtsi" / { @@ -60,6 +61,8 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x200>; + enable-method = "amlogic,meson8-smp"; + resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; }; cpu@201 { @@ -67,6 +70,8 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x201>; + enable-method = "amlogic,meson8-smp"; + resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; }; cpu@202 { @@ -74,6 +79,8 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x202>; + enable-method = "amlogic,meson8-smp"; + resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; }; cpu@203 { @@ -81,6 +88,8 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x203>; + enable-method = "amlogic,meson8-smp"; + resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; }; }; @@ -118,6 +127,11 @@ }; /* end of / */ &aobus { + pmu: pmu@e0 { + compatible = "amlogic,meson8-pmu", "syscon"; + reg = <0xe0 0x8>; + }; + pinctrl_aobus: pinctrl@84 { compatible = "amlogic,meson8-aobus-pinctrl"; reg = <0x84 0xc>; @@ -132,7 +146,7 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 120 16>; + gpio-ranges = <&pinctrl_aobus 0 0 16>; }; uart_ao_a_pins: uart_ao_a { @@ -173,6 +187,11 @@ reg = <0x8000 0x4>, <0x4000 0x460>; }; + analog_top: analog-top@81a8 { + compatible = "amlogic,meson8-analog-top", "syscon"; + reg = <0x81a8 0x14>; + }; + pwm_ef: pwm@86c0 { compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; reg = <0x86c0 0x10>; @@ -249,6 +268,19 @@ }; }; +&ahb_sram { + smp-sram@1ff80 { + compatible = "amlogic,meson8-smp-sram"; + reg = <0x1ff80 0x8>; + }; +}; + +&efuse { + compatible = "amlogic,meson8-efuse"; + clocks = <&clkc CLKID_EFUSE>; + clock-names = "core"; +}; + ðmac { clocks = <&clkc CLKID_ETH>; clock-names = "stmmaceth"; @@ -294,6 +326,12 @@ clock-names = "clkin", "core", "sana"; }; +&sdio { + compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; + clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; + clock-names = "core", "clkin"; +}; + &spifc { clocks = <&clkc CLKID_CLK81>; }; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index e50f1a1fdbc79a57116b499a8a227369083b387e..9ff6ca4e20d069f56427fef917f20d71bdf83649 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -76,3 +76,26 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&gpio_ao { + /* + * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal + * to be turned high in order to be detected by the USB Controller. + * This signal should be handled by a USB specific power sequence + * in order to reset the Hub when USB bus is powered down. + */ + usb-hub { + gpio-hog; + gpios = ; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index bc278da7df0d93b260eb36d0080b64de2711c592..d75e0ceda8bbec15119068e40ce15bd7e0212972 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -47,6 +47,7 @@ #include #include #include +#include #include "meson.dtsi" / { @@ -59,6 +60,8 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x200>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; }; cpu@201 { @@ -66,6 +69,8 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x201>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; }; cpu@202 { @@ -73,6 +78,8 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x202>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; }; cpu@203 { @@ -80,6 +87,20 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x203>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* 2 MiB reserved for Hardware ROM Firmware? */ + hwrom@0 { + reg = <0x0 0x200000>; + no-map; }; }; @@ -90,6 +111,11 @@ }; /* end of / */ &aobus { + pmu: pmu@e0 { + compatible = "amlogic,meson8b-pmu", "syscon"; + reg = <0xe0 0x18>; + }; + pinctrl_aobus: pinctrl@84 { compatible = "amlogic,meson8b-aobus-pinctrl"; reg = <0x84 0xc>; @@ -104,7 +130,7 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 130 16>; + gpio-ranges = <&pinctrl_aobus 0 0 16>; }; uart_ao_a_pins: uart_ao_a { @@ -130,6 +156,11 @@ #reset-cells = <1>; }; + analog_top: analog-top@81a8 { + compatible = "amlogic,meson8b-analog-top", "syscon"; + reg = <0x81a8 0x14>; + }; + pwm_ef: pwm@86c0 { compatible = "amlogic,meson8b-pwm"; reg = <0x86c0 0x10>; @@ -157,11 +188,31 @@ }; }; +&ahb_sram { + smp-sram@1ff80 { + compatible = "amlogic,meson8b-smp-sram"; + reg = <0x1ff80 0x8>; + }; +}; + + +&efuse { + compatible = "amlogic,meson8b-efuse"; + clocks = <&clkc CLKID_EFUSE>; + clock-names = "core"; +}; + ðmac { clocks = <&clkc CLKID_ETH>; clock-names = "stmmaceth"; }; +&gpio_intc { + compatible = "amlogic,meson-gpio-intc", + "amlogic,meson8b-gpio-intc"; + status = "okay"; +}; + &hwrng { compatible = "amlogic,meson8b-rng", "amlogic,meson-rng"; clocks = <&clkc CLKID_RNG0>; @@ -190,6 +241,12 @@ clock-names = "clkin", "core", "sana"; }; +&sdio { + compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio"; + clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; + clock-names = "core", "clkin"; +}; + &uart_AO { clocks = <&clkc CLKID_CLK81>; }; diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index 116ce78bea4fd0716ec53e7fa71aec275ec69b62..36cfa215620d2c26cc50f313826d53ffdfd24ec8 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -46,7 +46,7 @@ }; }; - usb0: ohci@00300000 { + usb0: ohci@300000 { num-ports = <1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts index f48497354221d3fd786258940e4d25e2e109f4de..63af4b13a36f040c41d6d5d34f91d6a91d9c1b38 100644 --- a/arch/arm/boot/dts/mt2701-evb.dts +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -56,12 +56,29 @@ bt_sco_codec:bt_sco_codec { compatible = "linux,bt-sco"; }; + + backlight_lcd: backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&bls 0 100000>; + brightness-levels = < + 0 16 32 48 64 80 96 112 + 128 144 160 176 192 208 224 240 + 255 + >; + default-brightness-level = <9>; + }; }; &auxadc { status = "okay"; }; +&bls { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_bls_gpio>; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -111,6 +128,12 @@ }; }; + pwm_bls_gpio: pwm_bls_gpio { + pins_cmd_dat { + pinmux = ; + }; + }; + spi_pins_a: spi0@0 { pins_spi { pinmux = , diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index afe12e5b51f95374e2f8f5f91b91f2bbc189e193..965ddfbc9953685e559bfc169ef654ce60bc7347 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -430,7 +430,9 @@ compatible = "mediatek,mt2701-audio"; reg = <0 0x11220000 0 0x2000>, <0 0x112a0000 0 0x20000>; - interrupts = ; + interrupts = , + ; + interrupt-names = "afe", "asys"; power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; clocks = <&infracfg CLK_INFRA_AUDIO>, @@ -530,6 +532,15 @@ #clock-cells = <1>; }; + bls: pwm@1400a000 { + compatible = "mediatek,mt2701-disp-pwm"; + reg = <0 0x1400a000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&mmsys CLK_MM_MDP_BLS_26M>, <&mmsys CLK_MM_DISP_BLS>; + clock-names = "main", "mm"; + status = "disabled"; + }; + larb0: larb@14010000 { compatible = "mediatek,mt2701-smi-larb"; reg = <0 0x14010000 0 0x1000>; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index 0d6f60af76402f5de54b7ecea8add726d85b31b0..41df742d78914b96eae2b2f7fa2e9b2154b1c3fc 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -139,7 +139,7 @@ status = "disabled"; }; - wdt: watchdog@010000000 { + wdt: watchdog@10000000 { compatible = "mediatek,mt6589-wdt"; reg = <0x10000000 0x44>; }; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index ec8a07415cb38816db5990aa240744b9d9b27e64..0640fb75bf59bc20e8a679d43d487395ade67d3a 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -227,8 +227,7 @@ }; pio: pinctrl@10005000 { - compatible = "mediatek,mt7623-pinctrl", - "mediatek,mt2701-pinctrl"; + compatible = "mediatek,mt7623-pinctrl"; reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>; pins-are-numbered; @@ -544,7 +543,9 @@ "mediatek,mt2701-audio"; reg = <0 0x11220000 0 0x2000>, <0 0x112a0000 0 0x20000>; - interrupts = ; + interrupts = , + ; + interrupt-names = "afe", "asys"; power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; clocks = <&infracfg CLK_INFRA_AUDIO>, @@ -678,7 +679,7 @@ interrupts = ; clocks = <&hifsys CLK_HIFSYS_USB0PHY>, <&topckgen CLK_TOP_ETHIF_SEL>; - clock-names = "sys_ck", "free_ck"; + clock-names = "sys_ck", "ref_ck"; power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; status = "disabled"; @@ -688,8 +689,6 @@ compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy"; reg = <0 0x1a1c4000 0 0x0700>; - clocks = <&clk26m>; - clock-names = "u3phya_ref"; #address-cells = <2>; #size-cells = <2>; ranges; @@ -697,12 +696,16 @@ u2port0: usb-phy@1a1c4800 { reg = <0 0x1a1c4800 0 0x0100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; u3port0: usb-phy@1a1c4900 { reg = <0 0x1a1c4900 0 0x0700>; + clocks = <&clk26m>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; @@ -717,7 +720,7 @@ interrupts = ; clocks = <&hifsys CLK_HIFSYS_USB1PHY>, <&topckgen CLK_TOP_ETHIF_SEL>; - clock-names = "sys_ck", "free_ck"; + clock-names = "sys_ck", "ref_ck"; power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>; status = "disabled"; @@ -727,8 +730,6 @@ compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy"; reg = <0 0x1a244000 0 0x0700>; - clocks = <&clk26m>; - clock-names = "u3phya_ref"; #address-cells = <2>; #size-cells = <2>; ranges; @@ -736,12 +737,16 @@ u2port1: usb-phy@1a244800 { reg = <0 0x1a244800 0 0x0100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; u3port1: usb-phy@1a244900 { reg = <0 0x1a244900 0 0x0700>; + clocks = <&clk26m>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; @@ -782,16 +787,15 @@ }; crypto: crypto@1b240000 { - compatible = "mediatek,mt7623-crypto"; + compatible = "mediatek,eip97-crypto"; reg = <0 0x1b240000 0 0x20000>; interrupts = , , , , ; - clocks = <&topckgen CLK_TOP_ETHIF_SEL>, - <ðsys CLK_ETHSYS_CRYPTO>; - clock-names = "ethif","cryp"; + clocks = <ðsys CLK_ETHSYS_CRYPTO>; + clock-names = "cryp"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index ee5a0bb22354df10d9d3fc6d4179f7f8460fd933..1a5ae4cd107f08294c4bddce41d7369a76fa9ecd 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -20,7 +20,7 @@ }; }; - bootrom: bootrom@00000000 { + bootrom: bootrom@0 { reg = <0x00000000 0x80000>; }; @@ -56,6 +56,7 @@ usb_phy: usb_phy { compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; vbus_reg: vbus_reg { diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi index 1de80c7886abaa7f9bb25432519c65a112a501ee..1df3ace3af9275254a05b4097b83d0a25a975061 100644 --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi @@ -7,6 +7,10 @@ reg = <0x80000000 0x8000000>; /* 128 MB */ }; + chosen { + stdout-path = &uart3; + }; + ocp { i2c0 { compatible = "i2c-cbus-gpio"; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 683b96a8f73e01248349440d1caab8fd7ffeb7cc..0349fcc9dc26ab8d80f568b1d5c8528a78a8a588 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -90,6 +90,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; tfp410: encoder0 { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 4d2eaf843fa960190514dffb06b24d46056adb3e..3ca8991a6c3e977e2a16bb30444db4478a61ca0d 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -64,6 +64,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; sound { diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 31d5ebf38892e77d04fc53fcd37922ffaca282e2..ab6003fe5a4341ded0b7668861e7ff1553a9ef57 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -43,12 +43,14 @@ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; vcc-supply = <&hsusb1_power>; + #phy-cells = <0>; }; /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; ads7846reg: ads7846-reg { diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index c963b31ec3b3cd9368911df73a21764663b42a5d..5a4ba0aea44711de976971991e91be063fc0ac46 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -9,146 +9,11 @@ #include "omap36xx.dtsi" #include "omap3-evm-common.dtsi" - +#include "omap3-evm-processor-common.dtsi" / { model = "TI OMAP37XX EVM (TMDSEVM3730)"; compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3"; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - wl12xx_vmmc: wl12xx_vmmc { - pinctrl-names = "default"; - pinctrl-0 = <&wl12xx_gpio>; - }; -}; - -&dss { - pinctrl-names = "default"; - pinctrl-0 = < - &dss_dpi_pins1 - &dss_dpi_pins2 - >; -}; - -&hsusb2_phy { - pinctrl-names = "default"; - pinctrl-0 = <&ehci_phy_pins>; -}; - -&omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>; - - dss_dpi_pins1: pinmux_dss_dpi_pins2 { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - - OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - - OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ - OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ - OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ - OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ - OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ - OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ - >; - }; - - mmc1_pins: pinmux_mmc1_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ - OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ - OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ - OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ - OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ - OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ - OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ - OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ - OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ - >; - }; - - /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */ - mmc2_pins: pinmux_mmc2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ - OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ - OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ - OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ - OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ - OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ - >; - }; - - /* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */ - on_board_gpio_61: pinmux_ehci_port_select_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) - >; - }; - - /* Used by OHCI and EHCI. OHCI won't work without external phy */ - hsusb2_pins: pinmux_hsusb2_pins { - pinctrl-single,pins = < - - /* mcspi1_cs3.hsusb2_data2 */ - OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) - - /* mcspi2_clk.hsusb2_data7 */ - OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) - - /* mcspi2_simo.hsusb2_data4 */ - OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) - - /* mcspi2_somi.hsusb2_data5 */ - OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) - - /* mcspi2_cs0.hsusb2_data6 */ - OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) - - /* mcspi2_cs1.hsusb2_data3 */ - OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) - >; - }; - - wl12xx_gpio: pinmux_wl12xx_gpio { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ - OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ - >; - }; - - smsc911x_pins: pinmux_smsc911x_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ - >; - }; }; &omap3_pmx_core2 { @@ -191,74 +56,7 @@ }; }; -&omap3_pmx_wkup { - dss_dpi_pins2: pinmux_dss_dpi_pins1 { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ - OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ - OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ - OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ - OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ - OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ - >; - }; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; -}; - -&mmc3 { - status = "disabled"; -}; - -&uart1 { - interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; -}; - -&uart2 { - interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; -}; - -&uart3 { - interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; -}; - -/* - * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface - * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V. - */ -&gpio2 { - en_usb2_port { - gpio-hog; - gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */ - output-low; - line-name = "enable usb2 port"; - }; -}; - -/* T2_GPIO_2 low to route GPIO_61 to on-board devices */ -&twl_gpio { - en_on_board_gpio_61 { - gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "en_hsusb2_clk"; - }; -}; - &gpmc { - ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */ - <5 0 0x2c000000 0x01000000>; - nand@0,0 { compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ @@ -309,9 +107,4 @@ reg = <0x780000 0x1f880000>; }; }; - - ethernet@gpmc { - pinctrl-names = "default"; - pinctrl-0 = <&smsc911x_pins>; - }; }; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index dbc3f030a16c00cf8baf4e75cbd53fa5d21dc2a0..ee64191e41ca187b60eda4e36dc7aeb641c34896 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -29,6 +29,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; leds { diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..ce7f42f9448cd6521d7f2d43595a1ab08161bf4f --- /dev/null +++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi @@ -0,0 +1,216 @@ +/* + * Common support for omap3 EVM 35xx/37xx processor modules + */ + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + }; +}; + +&dss { + vdds_dsi-supply = <&vpll2>; + vdda_video-supply = <&lcd_3v3>; + pinctrl-names = "default"; + pinctrl-0 = < + &dss_dpi_pins1 + &dss_dpi_pins2 + >; +}; + +&hsusb2_phy { + pinctrl-names = "default"; + pinctrl-0 = <&ehci_phy_pins>; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>; + + dss_dpi_pins1: pinmux_dss_dpi_pins2 { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ + OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ + OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ + OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */ + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + /* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */ + on_board_gpio_61: pinmux_ehci_port_select_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + + /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs1.hsusb2_data3 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; + + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ + OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ + >; + }; + + smsc911x_pins: pinmux_smsc911x_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ + >; + }; +}; + +&omap3_pmx_wkup { + dss_dpi_pins2: pinmux_dss_dpi_pins1 { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ + OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ + OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ + OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ + OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ + >; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; +}; + +&mmc3 { + status = "disabled"; +}; + +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +&uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; +}; + +&uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +/* + * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface + * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V. + */ +&gpio2 { + en_usb2_port { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */ + output-low; + line-name = "enable usb2 port"; + }; +}; + +/* T2_GPIO_2 low to route GPIO_61 to on-board devices */ +&twl_gpio { + en_on_board_gpio_61 { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "en_hsusb2_clk"; + }; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */ + <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for LAN9220 */ + + ethernet@gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&smsc911x_pins>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 99b2bfcd1059fdfbf1b4b3a95d7b598f224b199d..21a3b88aef0cc42efa2f857738f740b4fbd821d9 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -9,13 +9,81 @@ #include "omap34xx.dtsi" #include "omap3-evm-common.dtsi" +#include "omap3-evm-processor-common.dtsi" / { model = "TI OMAP35XX EVM (TMDSEVM3530)"; - compatible = "ti,omap3-evm", "ti,omap3"; + compatible = "ti,omap3-evm", "ti,omap3430", "ti,omap3"; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + + ehci_phy_pins: pinmux_ehci_phy_pins { + pinctrl-single,pins = < + + /* EHCI PHY reset GPIO etk_d7.gpio_21 */ + OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) + + /* EHCI VBUS etk_d8.gpio_22 */ + OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + + /* etk_d10.hsusb2_clk */ + OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) + + /* etk_d11.hsusb2_stp */ + OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) + + /* etk_d12.hsusb2_dir */ + OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d13.hsusb2_nxt */ + OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d14.hsusb2_data0 */ + OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d15.hsusb2_data1 */ + OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + +&gpmc { + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name= "micron,mt29f2g16abdhc"; + nand-bus-width = <16>; + gpmc,device-width = <2>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ + #address-cells = <1>; + #size-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 4504908c23fe991ef2805548550ea4b091977522..3dc56fb156b7e88d9503cfea220a3c9067b326c2 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -120,6 +120,7 @@ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + #phy-cells = <0>; }; tv0: connector { diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index 667f96245729cd7ef76c2a27dbce6fa2f6410f52..ecbec23af49f74a6ecccdd0ec99fc434422c9de3 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -58,6 +58,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */ vcc-supply = <&hsusb1_power>; + #phy-cells = <0>; }; tfp410: encoder { diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi index e94d9427450cafa9457be8f5b50d8bfa9a07d8b5..443f717074374274f7d82ffc385cb47e3d9cf8e7 100644 --- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -37,6 +37,7 @@ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index fa611a5e48506c688c9406424e6454fb8d724449..7ada1e93e166389eb4472cc39d61003b4cc68360 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -51,6 +51,7 @@ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_vcc3>; + #phy-cells = <0>; }; }; @@ -257,7 +258,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; gpiom1: gpio@20 { - compatible = "mcp,mcp23017"; + compatible = "microchip,mcp23017"; gpio-controller; #gpio-cells = <2>; reg = <0x20>; diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index b9e58c536afd5b63bf021869867c82914504d62a..39e35f8b8206aeca9f23286b305f8cc7c92563f9 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -26,6 +26,7 @@ clocks = <&isp 0>; clock-frequency = <9600000>; nokia,nvm-size = <(16 * 64)>; + flash-leds = <&as3645a_flash &as3645a_indicator>; port { smia_1_1: endpoint { link-frequencies = /bits/ 64 <199200000 210000000 499200000>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4acd32a1c4ef7c8801bbd516f2f317d50db21218..669c51c00c000ecb40afb036428be5e273381457 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -791,7 +791,7 @@ }; /* D/A converter for auto-focus */ - ad5820: dac@0c { + ad5820: dac@c { compatible = "adi,ad5820"; reg = <0x0c>; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 1b0bd72945f21337d1e89c3e1636bbfb5cabeecd..12fbb3da5fce9855ebcba310b6564bb50f6dd52e 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -271,14 +271,14 @@ #size-cells = <0>; reg = <0x30>; compatible = "ams,as3645a"; - flash@0 { + as3645a_flash: flash@0 { reg = <0x0>; flash-timeout-us = <150000>; flash-max-microamp = <320000>; led-max-microamp = <60000>; ams,input-max-microamp = <1750000>; }; - indicator@1 { + as3645a_indicator: indicator@1 { reg = <0x1>; led-max-microamp = <10000>; }; diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 646601a3ebd806fe83156f2244ab550c43e46f81..c354a1ed1e70fbe76a88f92caadc9636b59a15a9 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -60,6 +60,7 @@ clocks = <&isp 0>; clock-frequency = <9600000>; nokia,nvm-size = <(16 * 64)>; + flash-leds = <&as3645a_flash &as3645a_indicator>; port { smia_1_1: endpoint { link-frequencies = /bits/ 64 <210000000 333600000 398400000>; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index f25e158e7163b23201ca8e643f557b3965fc959d..ac141fcd1742e3e29a79c4eaacbf69884b171718 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -51,6 +51,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; /* gpio_183 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; /* Regulator to trigger the nPoweron signal of the Wifi module */ diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 53e007abdc7159ee69fd35a120ba30edb0704e3c..cd53dc6c00516b4d9be3aa5f3023a7ae1a3ffb48 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -205,6 +205,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */ vcc-supply = <&vaux2>; + #phy-cells = <0>; }; /* HS USB Host VBUS supply diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi index 25e100db7b1ac8ebf3de7449838196e9e91f7327..b8b9fcc41ef1f3d955a2ff3bc8f6ff622cd17976 100644 --- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi +++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi @@ -30,6 +30,7 @@ compatible = "sharp,ls037v7dw01"; label = "lcd"; power-supply = <&lcd_3v3>; + envdd-supply = <&lcd_3v3>; port { lcd_in: endpoint { diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index 9a601d15247bef5da1519db88b1680b119381b6d..6f5bd027b71753c8508acc93a56f211a95cd12be 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -46,6 +46,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; sound { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index bdaf30c8c405716ad2f1e434ac8abbd40bcdb786..bb33935df7b057eef7a9b237fc2d2f951f6ab375 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -215,6 +215,7 @@ #dma-cells = <1>; dma-channels = <32>; dma-requests = <96>; + ti,hwmods = "dma"; }; gpio1: gpio@48310000 { @@ -714,6 +715,7 @@ compatible = "ti,ohci-omap3"; reg = <0x48064400 0x400>; interrupts = <76>; + remote-wakeup-connected; }; usbhsehci: ehci@48064800 { diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 8b93d37310f28ba4c10ad81d35f8419914ef4633..24a463f8641fe5b968cdb5d62bf15ed4e100b128 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -73,6 +73,7 @@ /* HS USB Host PHY on PORT 1 */ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; /* LCD regulator from sw5 source */ diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index 6e6810c258eb29c15ff8b4e87a6ce1a6eac93f5e..eb123b24c8e330141b7ece42c6dea74f0cc2a837 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -43,6 +43,7 @@ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ + #phy-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&hsusb1phy_pins>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 2b48e51c372ab70122e13ee13d4f4a11722cd632..5501d1b4e6cdfa152804b7cbb5b277fcdc0417f6 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -13,6 +13,10 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; + chosen { + stdout-path = &uart3; + }; + aliases { display0 = &dvi0; display1 = &hdmi0; @@ -85,6 +89,7 @@ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ + #phy-cells = <0>; vcc-supply = <&hsusb1_power>; clocks = <&auxclk3_ck>; clock-names = "main_clk"; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 6500bfc8d1309a26198893583bb00861d5a69a1e..10fce28ceb5b7dc38477e60f0d87a86b6a384638 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -44,6 +44,7 @@ reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */ vcc-supply = <&vbat>; + #phy-cells = <0>; clocks = <&auxclk3_ck>; clock-names = "main_clk"; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 64d00f5893a6341d9283d5d1c853a629c6aa11bc..cc1a07a3620ff5daa9c32770fee918c45e9439cd 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -51,6 +51,17 @@ }; }; + /* + * Note that 4430 needs cross trigger interface (CTI) supported + * before we can configure the interrupts. This means sampling + * events are not supported for pmu. Note that 4460 does not use + * CTI, see also 4460.dtsi. + */ + pmu { + compatible = "arm,cortex-a9-pmu"; + ti,hwmods = "debugss"; + }; + gic: interrupt-controller@48241000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; @@ -163,6 +174,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0x2000 0x1000>; + ti,hwmods = "ctrl_module_core"; scm_conf: scm_conf@0 { compatible = "syscon"; @@ -175,9 +187,11 @@ omap4_padconf_core: scm@100000 { compatible = "ti,omap4-scm-padconf-core", "simple-bus"; + reg = <0x100000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x100000 0x1000>; + ti,hwmods = "ctrl_module_pad_core"; omap4_pmx_core: pinmux@40 { compatible = "ti,omap4-padconf", @@ -252,17 +266,33 @@ }; }; - omap4_pmx_wkup: pinmux@1e040 { - compatible = "ti,omap4-padconf", - "pinctrl-single"; - reg = <0x1e040 0x0038>; + omap4_scm_wkup: scm@c000 { + compatible = "ti,omap4-scm-wkup"; + reg = <0xc000 0x1000>; + ti,hwmods = "ctrl_module_wkup"; + }; + + omap4_padconf_wkup: padconf@1e000 { + compatible = "ti,omap4-scm-padconf-wkup", + "simple-bus"; + reg = <0x1e000 0x1000>; #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; + #size-cells = <1>; + ranges = <0 0x1e000 0x1000>; + ti,hwmods = "ctrl_module_pad_wkup"; + + omap4_pmx_wkup: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; }; }; }; @@ -282,6 +312,7 @@ #dma-cells = <1>; dma-channels = <32>; dma-requests = <127>; + ti,hwmods = "dma_system"; }; gpio1: gpio@4a310000 { @@ -351,10 +382,23 @@ #interrupt-cells = <2>; }; + target-module@48076000 { + compatible = "ti,sysc-omap4"; + ti,hwmods = "slimbus2"; + reg = <0x48076000 0x4>, + <0x48076010 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48076000 0x001000>; + + /* No child device binding or driver in mainline */ + }; + elm: elm@48078000 { compatible = "ti,am3352-elm"; reg = <0x48078000 0x2000>; - interrupts = <4>; + interrupts = ; ti,hwmods = "elm"; status = "disabled"; }; @@ -411,6 +455,57 @@ clock-frequency = <48000000>; }; + target-module@4a0db000 { + compatible = "ti,sysc-sr"; + ti,hwmods = "smartreflex_iva"; + reg = <0x4a0db000 0x4>, + <0x4a0db008 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a0db000 0x001000>; + + smartreflex_iva: smartreflex@0 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0 0x80>; + interrupts = ; + }; + }; + + target-module@4a0dd000 { + compatible = "ti,sysc-sr"; + ti,hwmods = "smartreflex_core"; + reg = <0x4a0dd000 0x4>, + <0x4a0dd008 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a0dd000 0x001000>; + + smartreflex_core: smartreflex@0 { + compatible = "ti,omap4-smartreflex-core"; + reg = <0 0x80>; + interrupts = ; + }; + }; + + target-module@4a0d9000 { + compatible = "ti,sysc-sr"; + ti,hwmods = "smartreflex_mpu"; + reg = <0x4a0d9000 0x4>, + <0x4a0d9008 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a0d9000 0x001000>; + + smartreflex_mpu: smartreflex@0 { + compatible = "ti,omap4-smartreflex-mpu"; + reg = <0 0x80>; + interrupts = ; + }; + }; + hwspinlock: spinlock@4a0f6000 { compatible = "ti,omap4-hwspinlock"; reg = <0x4a0f6000 0x1000>; @@ -489,6 +584,13 @@ dma-names = "tx0", "rx0", "tx1", "rx1"; }; + hdqw1w: 1w@480b2000 { + compatible = "ti,omap3-1w"; + reg = <0x480b2000 0x1000>; + interrupts = ; + ti,hwmods = "hdq1w"; + }; + mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; reg = <0x480b8000 0x200>; @@ -565,6 +667,40 @@ dma-names = "tx", "rx"; }; + hsi: hsi@4a058000 { + compatible = "ti,omap4-hsi"; + reg = <0x4a058000 0x4000>, + <0x4a05c000 0x1000>; + reg-names = "sys", "gdd"; + ti,hwmods = "hsi"; + + clocks = <&hsi_fck>; + clock-names = "hsi_fck"; + + interrupts = ; + interrupt-names = "gdd_mpu"; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a058000 0x4000>; + + hsi_port1: hsi-port@2000 { + compatible = "ti,omap4-hsi-port"; + reg = <0x2000 0x800>, + <0x2800 0x800>; + reg-names = "tx", "rx"; + interrupts = ; + }; + + hsi_port2: hsi-port@3000 { + compatible = "ti,omap4-hsi-port"; + reg = <0x3000 0x800>, + <0x3800 0x800>; + reg-names = "tx", "rx"; + interrupts = ; + }; + }; + mmu_dsp: mmu@4a066000 { compatible = "ti,omap4-iommu"; reg = <0x4a066000 0x100>; @@ -573,6 +709,19 @@ #iommu-cells = <0>; }; + target-module@52000000 { + compatible = "ti,sysc-omap4"; + ti,hwmods = "iss"; + reg = <0x52000000 0x4>, + <0x52000010 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x52000000 0x1000000>; + + /* No child device binding, driver in staging */ + }; + mmu_ipu: mmu@55082000 { compatible = "ti,omap4-iommu"; reg = <0x55082000 0x100>; @@ -589,6 +738,14 @@ ti,hwmods = "wd_timer2"; }; + wdt3: wdt@40130000 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x40130000 0x80>, /* MPU private access */ + <0x49030000 0x80>; /* L3 Interconnect */ + interrupts = ; + ti,hwmods = "wd_timer3"; + }; + mcpdm: mcpdm@40132000 { compatible = "ti,omap4-mcpdm"; reg = <0x40132000 0x7f>, /* MPU private access */ @@ -659,6 +816,56 @@ status = "disabled"; }; + target-module@40128000 { + compatible = "ti,sysc-mcasp"; + ti,hwmods = "mcasp"; + reg = <0x40128004 0x4>; + reg-names = "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x40128000 0x1000>, /* MPU */ + <0x49028000 0x49028000 0x1000>; /* L3 */ + + /* + * Child device unsupported by davinci-mcasp. At least + * RX path is disabled for omap4, and only DIT mode + * works with no I2S. See also old Android kernel + * omap-mcasp driver for more information. + */ + }; + + target-module@4012c000 { + compatible = "ti,sysc-omap4"; + ti,hwmods = "slimbus1"; + reg = <0x4012c000 0x4>, + <0x4012c010 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */ + <0x4902c000 0x4902c000 0x1000>; /* L3 */ + + /* No child device binding or driver in mainline */ + }; + + target-module@401f1000 { + compatible = "ti,sysc-omap4"; + ti,hwmods = "aess"; + reg = <0x401f1000 0x4>, + <0x401f1010 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x401f1000 0x1000>, /* MPU */ + <0x490f1000 0x490f1000 0x1000>; /* L3 */ + + /* + * No child device binding or driver in mainline. + * See Android tree and related upstreaming efforts + * for the old driver. + */ + }; + mcbsp4: mcbsp@48096000 { compatible = "ti,omap4-mcbsp"; reg = <0x48096000 0xff>; /* L4 Interconnect */ @@ -747,6 +954,19 @@ }; }; + target-module@4a10a000 { + compatible = "ti,sysc-omap4"; + ti,hwmods = "fdif"; + reg = <0x4a10a000 0x4>, + <0x4a10a010 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a10a000 0x1000>; + + /* No child device binding or driver in mainline */ + }; + timer1: timer@4a318000 { compatible = "ti,omap3430-timer"; reg = <0x4a318000 0x80>; @@ -861,14 +1081,13 @@ usbhsohci: ohci@4a064800 { compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; - interrupt-parent = <&gic>; interrupts = ; + remote-wakeup-connected; }; usbhsehci: ehci@4a064c00 { compatible = "ti,ehci-omap"; reg = <0x4a064c00 0x400>; - interrupt-parent = <&gic>; interrupts = ; }; }; @@ -962,6 +1181,22 @@ status = "disabled"; }; + target-module@56000000 { + compatible = "ti,sysc-omap4"; + ti,hwmods = "gpu"; + reg = <0x5601fc00 0x4>, + <0x5601fc10 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x56000000 0x2000000>; + + /* + * Closed source PowerVR driver, no child device + * binding or driver in mainline + */ + }; + dss: dss@58000000 { compatible = "ti,omap4-dss"; reg = <0x58000000 0x80>; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 7824b2631cb6b3f93ffaedbaff5ebc65d6064292..1b20838bb9a42ed64b80b0943dd59acf8be0d06d 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -14,6 +14,10 @@ display0 = &hdmi0; }; + chosen { + stdout-path = &uart3; + }; + vmain: fixedregulator-vmain { compatible = "regulator-fixed"; regulator-name = "vmain"; @@ -69,12 +73,14 @@ clocks = <&auxclk1_ck>; clock-names = "main_clk"; clock-frequency = <19200000>; + #phy-cells = <0>; }; /* HS USB Host PHY on PORT 3 */ hsusb3_phy: hsusb3_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ + #phy-cells = <0>; }; tpd12s015: encoder { diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 5b172a04b6f1b14193f280228432adf19b00296d..5e21fb430a65daa8e29a1ca90a404389d9dc99a9 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -63,12 +63,14 @@ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */ + #phy-cells = <0>; }; /* HS USB Host PHY on PORT 3 */ hsusb3_phy: hsusb3_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */ + #phy-cells = <0>; }; leds { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index eaff2a5751ddc11c5b1ec901a60c6f7c671aabac..51a7fb3d7b9a019f5b76d5f72afaa0c0c857e050 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -194,7 +194,7 @@ pbias_mmc_reg: pbias_mmc_omap5 { regulator-name = "pbias_mmc_omap5"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; }; }; }; @@ -295,6 +295,7 @@ #dma-cells = <1>; dma-channels = <32>; dma-requests = <127>; + ti,hwmods = "dma_system"; }; gpio1: gpio@4ae10000 { @@ -939,6 +940,7 @@ compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; interrupts = ; + remote-wakeup-connected; }; usbhsehci: ehci@4a064c00 { diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/owl-s500-cubieboard6.dts new file mode 100644 index 0000000000000000000000000000000000000000..ea4e01bce8d14fe005316187b1c4b4c7c809c345 --- /dev/null +++ b/arch/arm/boot/dts/owl-s500-cubieboard6.dts @@ -0,0 +1,44 @@ +/* + * Cubietech CubieBoard6 + * + * Copyright (c) 2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include "owl-s500.dtsi" + +/ { + compatible = "cubietech,cubieboard6", "actions,s500"; + model = "CubieBoard6"; + + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; + + uart3_clk: uart3-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; +}; + +&timer { + clocks = <&hosc>; +}; + +&uart3 { + status = "okay"; + clocks = <&uart3_clk>; +}; diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts index 521463d4cac6a22f966a81df75a38e9491237a50..7be1d2eaf3f06904bbbc33a1b65d1063853a339a 100644 --- a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts +++ b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts @@ -19,8 +19,15 @@ chosen { stdout-path = "serial3:115200n8"; }; + + uart3_clk: uart3-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; }; &uart3 { status = "okay"; + clocks = <&uart3_clk>; }; diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi index 51a48741d4c015aff87904b26471d887bd271831..43c9980a4260cf1c5b5fa1b23c3dfe84ac4a9252 100644 --- a/arch/arm/boot/dts/owl-s500.dtsi +++ b/arch/arm/boot/dts/owl-s500.dtsi @@ -7,6 +7,7 @@ */ #include +#include / { compatible = "actions,s500"; @@ -43,6 +44,7 @@ compatible = "arm,cortex-a9"; reg = <0x2>; enable-method = "actions,s500-smp"; + power-domains = <&sps S500_PD_CPU2>; }; cpu3: cpu@3 { @@ -50,6 +52,7 @@ compatible = "arm,cortex-a9"; reg = <0x3>; enable-method = "actions,s500-smp"; + power-domains = <&sps S500_PD_CPU3>; }; }; diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi index 46aa6db8353ac3bc1dfa9f2af943d0fee15551c7..c2b48a1838eb2fafbe0c492017be28d757607fc7 100644 --- a/arch/arm/boot/dts/ox810se.dtsi +++ b/arch/arm/boot/dts/ox810se.dtsi @@ -207,7 +207,7 @@ }; }; - gpio0: gpio@000000 { + gpio0: gpio@0 { compatible = "oxsemi,ox810se-gpio"; reg = <0x000000 0x100000>; interrupts = <21>; @@ -296,7 +296,7 @@ compatible = "simple-bus"; ranges = <0 0x45000000 0x1000000>; - sys: sys-ctrl@000000 { + sys: sys-ctrl@0 { compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; reg = <0x000000 0x100000>; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi index 459207536a46654246517adfdd62cd6a38629202..085bbd33eadc25a4dc1d3fe6d635794c978b716f 100644 --- a/arch/arm/boot/dts/ox820.dtsi +++ b/arch/arm/boot/dts/ox820.dtsi @@ -173,7 +173,7 @@ }; }; - gpio0: gpio@000000 { + gpio0: gpio@0 { compatible = "oxsemi,ox820-gpio"; reg = <0x000000 0x100000>; interrupts = ; diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi index 533919e96eaee8f70054a42e5e66db433143d6a4..a1266cf8776ce9aea1e13ef62bad3474161cbba0 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi @@ -124,7 +124,7 @@ #size-cells = <1>; ranges = <0 0x200000 0x80000>; - rtc0: rtc@00000 { + rtc0: rtc@0 { compatible = "picochip,pc3x2-rtc"; clock-freq = <200000000>; reg = <0x00000 0xf>; diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi index ab3e80085511fef0a3911e4d9fc67d2f2d7c0d70..d78cd207eca1ac319841248a59629984e898e002 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi @@ -223,7 +223,7 @@ #size-cells = <1>; ranges = <0 0x200000 0x80000>; - rtc0: rtc@00000 { + rtc0: rtc@0 { compatible = "picochip,pc3x2-rtc"; clock-freq = <200000000>; reg = <0x00000 0xf>; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 3139221737eeba04f3926b544225680a425ccb04..be5177221cbbc3fc12d23d51271498ac26846bd4 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -127,12 +127,12 @@ }; }; - usb0: ohci@00700000 { + usb0: ohci@700000 { status = "okay"; num-ports = <2>; }; - usb1: ehci@00800000 { + usb1: ehci@800000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 9d725f983282511f7dae7961b6d5748a48761f97..497bb065eb9d3ca886ed2db2dce00dc3d9411848 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -397,23 +397,23 @@ xoadc-ref-supply = <&pm8058_l18>; /* Board-specific channels */ - mpp5@05 { + mpp5@5 { /* Connected to AOUT of ALS sensor */ reg = <0x00 0x05>; }; - mpp6@06 { + mpp6@6 { /* Connected to test point TP43 */ reg = <0x00 0x06>; }; - mpp7@07 { + mpp7@7 { /* Connected to battery thermistor */ reg = <0x00 0x07>; }; - mpp8@08 { + mpp8@8 { /* Connected to battery ID detector */ reg = <0x00 0x08>; }; - mpp9@09 { + mpp9@9 { /* Connected to XO thermistor */ reg = <0x00 0x09>; }; @@ -512,7 +512,7 @@ pinctrl-names = "default"; pinctrl-0 = <&dragon_gsbi12_i2c_pins>; - ak8975@0c { + ak8975@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; /* FIXME: GPIO33 has interrupt 224 on the PM8058 */ diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 6089c8d56cd549c6476a519bb5efe82f29258315..3ca96e3618787be4931ed1c22b3192547ac0ac13 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -591,6 +591,7 @@ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; clock-names = "core", "iface"; + status = "disabled"; }; }; @@ -907,11 +908,11 @@ usb_hs1_phy: phy { compatible = "qcom,usb-hs-phy-apq8064", "qcom,usb-hs-phy"; - #phy-cells = <0>; clocks = <&sleep_clk>, <&cxo_board>; clock-names = "sleep", "ref"; resets = <&usb1 0>; reset-names = "por"; + #phy-cells = <0>; }; }; }; @@ -1264,6 +1265,7 @@ dsi0_phy: dsi-phy@4700200 { compatible = "qcom,dsi-phy-28nm-8960"; #clock-cells = <1>; + #phy-cells = <0>; reg = <0x04700200 0x100>, <0x04700300 0x200>, @@ -1418,6 +1420,7 @@ clocks = <&mmcc HDMI_S_AHB_CLK>; clock-names = "slave_iface_clk"; + #phy-cells = <0>; }; mdp: mdp@5100000 { diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 221c4584552f9df40ababa4dc3cc22c2216d0811..33030f9419fefdbf267e4e7ce1e0947def1c77e0 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -124,6 +124,73 @@ reg = <0x900000 0x4000>; }; + gsbi6: gsbi@16500000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x16500000 0x100>; + clocks = <&gcc GSBI6_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi6_serial: serial@16540000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16540000 0x1000>, + <0x16500000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi6_i2c: i2c@16580000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16580000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gsbi7: gsbi@16600000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x16600000 0x100>; + clocks = <&gcc GSBI7_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi7_serial: serial@16640000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16640000 0x1000>, + <0x16600000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi7_i2c: i2c@16680000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16680000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; gsbi8: gsbi@19800000 { compatible = "qcom,gsbi-v1.0.0"; @@ -317,37 +384,37 @@ #size-cells = <0>; #io-channel-cells = <2>; - vcoin: adc-channel@00 { + vcoin: adc-channel@0 { reg = <0x00 0x00>; }; - vbat: adc-channel@01 { + vbat: adc-channel@1 { reg = <0x00 0x01>; }; - dcin: adc-channel@02 { + dcin: adc-channel@2 { reg = <0x00 0x02>; }; - ichg: adc-channel@03 { + ichg: adc-channel@3 { reg = <0x00 0x03>; }; - vph_pwr: adc-channel@04 { + vph_pwr: adc-channel@4 { reg = <0x00 0x04>; }; - usb_vbus: adc-channel@0a { + usb_vbus: adc-channel@a { reg = <0x00 0x0a>; }; - die_temp: adc-channel@0b { + die_temp: adc-channel@b { reg = <0x00 0x0b>; }; - ref_625mv: adc-channel@0c { + ref_625mv: adc-channel@c { reg = <0x00 0x0c>; }; - ref_1250mv: adc-channel@0d { + ref_1250mv: adc-channel@d { reg = <0x00 0x0d>; }; - ref_325mv: adc-channel@0e { + ref_325mv: adc-channel@e { reg = <0x00 0x0e>; }; - ref_muxoff: adc-channel@0f { + ref_muxoff: adc-channel@f { reg = <0x00 0x0f>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts new file mode 100644 index 0000000000000000000000000000000000000000..d0a5df90b543bfa63f201ee1cf14fd3a9b7d0ac4 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts @@ -0,0 +1,321 @@ +#include "qcom-msm8974.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include +#include +#include + + +/ { + model = "Fairphone 2"; + compatible = "fairphone,fp2", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + smd { + rpm { + rpm_requests { + pm8841-regulators { + s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + + regulator-always-on; + regulator-boot-on; + }; + + s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + + regulator-boot-on; + }; + + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + regulator-always-on; + regulator-boot-on; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l11 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + + regulator-boot-on; + }; + }; + }; + }; + }; +}; + +&soc { + serial@f991e000 { + status = "ok"; + }; + + pinctrl@fd510000 { + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + }; + + sdhci@f9824900 { + status = "ok"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; + }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; +}; + +&spmi_bus { + pm8941@0 { + gpios@c000 { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio1", "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = ; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts new file mode 100644 index 0000000000000000000000000000000000000000..e87f2c99060d46fd829e1a1619739349bf61ced3 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts @@ -0,0 +1,641 @@ +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include +#include +#include + +/ { + model = "Sony Xperia Z2 Tablet"; + compatible = "sony,xperia-castor", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + }; + + smd { + rpm { + rpm_requests { + pm8941-regulators { + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-system-load = <154000>; + }; + + s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + regulator-always-on; + regulator-boot-on; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-allow-set-load; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <500000>; + }; + + l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + + regulator-boot-on; + }; + }; + }; + }; + }; + + vreg_bl_vddio: lcd-backlight-vddio { + compatible = "regulator-fixed"; + regulator-name = "vreg_bl_vddio"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + gpio = <&msmgpio 69 0>; + enable-active-high; + + vin-supply = <&pm8941_s3>; + startup-delay-us = <70000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_backlight_en_pin_a>; + }; + + vreg_vsp: lcd-dcdc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_vsp"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + + gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_dcdc_en_pin_a>; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; +}; + +&soc { + sdhci@f9824900 { + status = "ok"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; + }; + + sdhci@f9864900 { + status = "ok"; + + max-frequency = <100000000>; + non-removable; + vmmc-supply = <&vreg_wlan>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc3_pin_a>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; + }; + + sdhci@f98a4900 { + status = "ok"; + + bus-width = <4>; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + }; + + serial@f991e000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_pin_a>; + }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; + + pinctrl@fd510000 { + blsp1_uart2_pin_a: blsp1-uart2-pin-active { + rx { + pins = "gpio5"; + function = "blsp_uart2"; + + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio4"; + function = "blsp_uart2"; + + drive-strength = <4>; + bias-disable; + }; + }; + + i2c8_pins: i2c8 { + mux { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + + drive-strength = <2>; + bias-disable; + }; + }; + + i2c11_pins: i2c11 { + mux { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + + drive-strength = <2>; + bias-disable; + }; + }; + + lcd_backlight_en_pin_a: lcd-backlight-vddio { + pins = "gpio69"; + drive-strength = <10>; + output-low; + bias-disable; + }; + + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdhc2_cd_pin_a: sdhc2-cd-pin-active { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + sdhc3_pin_a: sdhc3-pin-active { + clk { + pins = "gpio40"; + function = "sdc3"; + + drive-strength = <10>; + bias-disable; + }; + + cmd { + pins = "gpio39"; + function = "sdc3"; + + drive-strength = <10>; + bias-pull-up; + }; + + data { + pins = "gpio35", "gpio36", "gpio37", "gpio38"; + function = "sdc3"; + + drive-strength = <10>; + bias-pull-up; + }; + }; + + ts_int_pin: synaptics { + pin { + pins = "gpio86"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + input-enable; + }; + }; + }; + + i2c@f9964000 { + status = "ok"; + + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_pins>; + + synaptics@2c { + compatible = "syna,rmi-i2c"; + reg = <0x2c>; + + interrupt-parent = <&msmgpio>; + interrupts = <86 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + rmi-f01@1 { + reg = <0x1>; + syna,nosleep = <1>; + }; + + rmi-f11@11 { + reg = <0x11>; + syna,f11-flip-x = <1>; + syna,sensor-type = <1>; + }; + }; + }; + + i2c@f9967000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c11_pins>; + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + lp8566_wled: backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + power-supply = <&vreg_bl_vddio>; + + bl-name = "backlight"; + dev-ctrl = /bits/ 8 <0x05>; + init-brt = /bits/ 8 <0x3f>; + rom_a0h { + rom-addr = /bits/ 8 <0xa0>; + rom-val = /bits/ 8 <0xff>; + }; + rom_a1h { + rom-addr = /bits/ 8 <0xa1>; + rom-val = /bits/ 8 <0x3f>; + }; + rom_a2h { + rom-addr = /bits/ 8 <0xa2>; + rom-val = /bits/ 8 <0x20>; + }; + rom_a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + rom_a4h { + rom-addr = /bits/ 8 <0xa4>; + rom-val = /bits/ 8 <0x02>; + }; + rom_a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x04>; + }; + rom_a6h { + rom-addr = /bits/ 8 <0xa6>; + rom-val = /bits/ 8 <0x80>; + }; + rom_a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xf7>; + }; + rom_a9h { + rom-addr = /bits/ 8 <0xa9>; + rom-val = /bits/ 8 <0x80>; + }; + rom_aah { + rom-addr = /bits/ 8 <0xaa>; + rom-val = /bits/ 8 <0x0f>; + }; + rom_aeh { + rom-addr = /bits/ 8 <0xae>; + rom-val = /bits/ 8 <0x0f>; + }; + }; + }; +}; + +&spmi_bus { + pm8941@0 { + charger@1000 { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; + }; + + gpios@c000 { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = ; + }; + + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio17"; + function = "func2"; + + output-high; + power-source = ; + }; + + wlan_regulator_pin: wl-reg-active { + pins = "gpio18"; + function = "normal"; + + bias-disable; + power-source = ; + }; + + lcd_dcdc_en_pin_a: lcd-dcdc-en-active { + pins = "gpio20"; + function = "normal"; + + bias-disable; + power-source = ; + input-disable; + output-low; + }; + + }; + + coincell@2800 { + status = "ok"; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 33002fed8cc3023d4e08a4f942c9bd0193439be5..d9019a49b292d8301b9e39616cc013871319bfb3 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -18,27 +18,27 @@ #size-cells = <1>; ranges; - mpss@08000000 { + mpss@8000000 { reg = <0x08000000 0x5100000>; no-map; }; - mba@00d100000 { + mba@d100000 { reg = <0x0d100000 0x100000>; no-map; }; - reserved@0d200000 { + reserved@d200000 { reg = <0x0d200000 0xa00000>; no-map; }; - adsp_region: adsp@0dc00000 { + adsp_region: adsp@dc00000 { reg = <0x0dc00000 0x1900000>; no-map; }; - venus@0f500000 { + venus@f500000 { reg = <0x0f500000 0x500000>; no-map; }; @@ -48,17 +48,17 @@ no-map; }; - tz@0fc00000 { + tz@fc00000 { reg = <0x0fc00000 0x160000>; no-map; }; - rfsa@0fd60000 { + rfsa@fd60000 { reg = <0x0fd60000 0x20000>; no-map; }; - rmtfs@0fd80000 { + rmtfs@fd80000 { reg = <0x0fd80000 0x180000>; no-map; }; @@ -614,6 +614,20 @@ status = "disabled"; }; + sdhci@f9864900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC3_APPS_CLK>, + <&gcc GCC_SDCC3_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + status = "disabled"; + }; + sdhci@f98a4900 { compatible = "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..6740a4cb7da8db0206253b7a4ffa7e67c3664f9b --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi @@ -0,0 +1,18 @@ +#include "qcom-msm8974.dtsi" + +/ { + soc { + sdhci@f9824900 { + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_CDCCAL_FF_CLK>, + <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>; + clock-names = "core", "iface", "xo", "cal", "sleep"; + }; + + clock-controller@fc400000 { + compatible = "qcom,gcc-msm8974pro"; + }; + }; +}; diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts index a1b2aef984f635ce31d90061ff3e14c22c156d84..779f724b4531defa1eebf6cf5a179a4b8bb1dcc6 100644 --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -11,6 +11,8 @@ /dts-v1/; #include "r7s72100.dtsi" +#include +#include / { model = "GR-Peach"; @@ -28,7 +30,6 @@ memory@20000000 { device_type = "memory"; reg = <0x20000000 0x00a00000>; - }; lbsc { @@ -51,6 +52,44 @@ reg = <0x00600000 0x00200000>; }; }; + + leds { + status = "okay"; + compatible = "gpio-leds"; + + led1 { + gpios = <&port6 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + scif2_pins: serial2 { + /* P6_2 as RxD2; P6_3 as TxD2 */ + pinmux = , ; + }; + + ether_pins: ether { + /* Ethernet on Ports 1,3,5,10 */ + pinmux = , /* P1_14 = ET_COL */ + , /* P3_0 = ET_TXCLK */ + , /* P3_3 = ET_MDIO */ + , /* P3_4 = ET_RXCLK */ + , /* P3_5 = ET_RXER */ + , /* P3_6 = ET_RXDV */ + , /* P5_9 = ET_MDC */ + , /* P10_1 = ET_TXER */ + , /* P10_2 = ET_TXEN */ + , /* P10_3 = ET_CRS */ + , /* P10_4 = ET_TXD0 */ + , /* P10_5 = ET_TXD1 */ + , /* P10_6 = ET_TXD2 */ + , /* P10_7 = ET_TXD3 */ + , /* P10_8 = ET_RXD0 */ + , /* P10_9 = ET_RXD1 */ + ,/* P10_10 = ET_RXD2 */ + ;/* P10_11 = ET_RXD3 */ + }; }; &extal_clk { @@ -61,6 +100,38 @@ clock-frequency = <48000000>; }; +&mtu2 { + status = "okay"; +}; + +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + &scif2 { + pinctrl-names = "default"; + pinctrl-0 = <&scif2_pins>; + + status = "okay"; +}; + +ðer { + pinctrl-names = "default"; + pinctrl-0 = <ðer_pins>; + status = "okay"; + + renesas,no-ether-link; + phy-handle = <&phy0>; + + phy0: ethernet-phy@0 { + reg = <0>; + + reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <5>; + }; }; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 4ed12a4d9d51382143357585358f20081e216b35..ab9645a42eca3811084c7b09cfddfdeebd497f81 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -203,6 +203,7 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <400000000>; + clocks = <&cpg_clocks R7S72100_CLK_I>; next-level-cache = <&L2>; }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 310222634570d98f19cbad69b3473ba6d0e20798..dd4d09712a2a3a8885bbb99889494742a9cc945d 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -27,6 +27,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; + clocks = <&cpg_clocks R8A73A4_CLK_Z>; clock-frequency = <1500000000>; power-domains = <&pd_a2sl>; next-level-cache = <&L2_CA15>; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts new file mode 100644 index 0000000000000000000000000000000000000000..d90eb8464222e33d2682523f7288f561c38e44af --- /dev/null +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts @@ -0,0 +1,19 @@ +/* + * Device Tree Source for the iWave-RZ/G1M Qseven board + camera daughter board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7743-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" +#include "iwg20d-q7-dbcm-ca.dtsi" + +/ { + model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board"; + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; +}; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts index 081af01928519e333deef4ac6ab1e579419aa08a..6aa6b7467704bc30dc72435b23e8611a17548927 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the iWave-RZG1M Qseven carrier board + * Device Tree Source for the iWave-RZ/G1M Qseven board * * Copyright (C) 2017 Renesas Electronics Corp. * @@ -10,47 +10,9 @@ /dts-v1/; #include "r8a7743-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" / { model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M"; compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; - - aliases { - serial0 = &scif0; - ethernet0 = &avb; - }; -}; - -&pfc { - scif0_pins: scif0 { - groups = "scif0_data_d"; - function = "scif0"; - }; - - avb_pins: avb { - groups = "avb_mdio", "avb_gmii"; - function = "avb"; - }; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy3>; - phy-mode = "gmii"; - renesas,no-ether-link; - status = "okay"; - - phy3: ethernet-phy@3 { - reg = <3>; - micrel,led-mode = <1>; - }; }; diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi index ff799381863763decedb115e645980670d973b5b..75a8ca5718463e67701d072581beb324eed6858c 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi +++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi @@ -9,6 +9,7 @@ */ #include "r8a7743.dtsi" +#include / { compatible = "iwave,g20m", "renesas,r8a7743"; @@ -42,6 +43,17 @@ groups = "mmc_data8_b", "mmc_ctrl"; function = "mmc"; }; + + qspi_pins: qspi { + groups = "qspi_ctrl", "qspi_data2"; + function = "qspi"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; }; &mmcif0 { @@ -53,3 +65,34 @@ non-removable; status = "okay"; }; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* WARNING - This device contains the bootloader. Handle with care. */ + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + m25p,fast-read; + spi-cpol; + spi-cpha; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 14222c72f0e0f7d5ad95a46d68b310df76fff6cc..7bbba4a36f31814979e1ff3c8e79a2972be65b73 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -25,6 +25,13 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &iic0; + i2c7 = &iic1; + i2c8 = &iic3; + spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; + spi3 = &msiof2; }; cpus { @@ -56,6 +63,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; power-domains = <&sysc R8A7743_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; @@ -101,7 +109,7 @@ gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -116,7 +124,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -131,7 +139,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -146,7 +154,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -161,7 +169,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -176,7 +184,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -191,7 +199,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -206,7 +214,7 @@ gpio7: gpio@e6055800 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055800 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -348,6 +356,34 @@ dma-channels = <15>; }; + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7743-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = ; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7743-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = ; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + /* The memory map in the User's Manual maps the cores to bus * numbers */ @@ -436,6 +472,58 @@ status = "disabled"; }; + iic0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = ; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + iic1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = ; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; + + iic3: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = ; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7743", "renesas,rcar-gen2-scifa", "renesas,scifa"; @@ -779,6 +867,241 @@ max-frequency = <97500000>; status = "disabled"; }; + + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7743", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 917>; + status = "disabled"; + }; + + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7743", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 000>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 000>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7743", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 208>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7743", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 205>; + status = "disabled"; + }; + + /* + * pci1 and xhci share the same phy, therefore only one of them + * can be active at any one time. If both of them are enabled, + * a race condition will determine who'll control the phy. + * A firmware file is needed by the xhci driver in order for + * USB 3.0 to work properly. + */ + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7743", + "renesas,rcar-gen2-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = ; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 328>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7743"; + reg = <0 0xee100000 0 0x328>; + interrupts = ; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7743"; + reg = <0 0xee140000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7743"; + reg = <0 0xee160000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7743", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 704>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7743", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7743", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7743", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x10800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x11000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; }; /* External root clock */ diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts new file mode 100644 index 0000000000000000000000000000000000000000..52153ec3638cff22cc697125d4ccb7135dbd4308 --- /dev/null +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -0,0 +1,109 @@ +/* + * Device Tree Source for the iWave-RZG1E SODIMM carrier board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7745-iwg22m.dtsi" + +/ { + model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E"; + compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745"; + + aliases { + serial0 = &scif4; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&pfc { + scif4_pins: scif4 { + groups = "scif4_data_b"; + function = "scif4"; + }; + + avb_pins: avb { + groups = "avb_mdio", "avb_gmii"; + function = "avb"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; +}; + +&scif4 { + pinctrl-0 = <&scif4_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy@3 { + /* + * On some older versions of the platform (before R4.0) the phy address + * may be 1 or 3. The address is fixed to 3 for R4.0 onwards. + */ + reg = <3>; + micrel,led-mode = <1>; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..ed9a8cf3fe36c01375b0bc15f478075dbf4476ea --- /dev/null +++ b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi @@ -0,0 +1,111 @@ +/* + * Device Tree Source for the iWave-RZG1E-G22M SODIMM SOM + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "r8a7745.dtsi" +#include + +/ { + compatible = "iwave,g22m", "renesas,r8a7745"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x20000000>; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + mmcif0_pins: mmc { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + }; + + qspi_pins: qspi { + groups = "qspi_ctrl", "qspi_data2"; + function = "qspi"; + }; + + sdhi1_pins: sd1 { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <3300>; + }; + + i2c3_pins: i2c3 { + groups = "i2c3_b"; + function = "i2c3"; + }; +}; + +&mmcif0 { + pinctrl-0 = <&mmcif0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* WARNING - This device contains the bootloader. Handle with care. */ + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + m25p,fast-read; + spi-cpol; + spi-cpha; + }; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + cd-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc@68 { + compatible = "ti,bq32000"; + reg = <0x68>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index aff90dfb8b32169c1cf0c4cf98adc7a090ce5419..3a50f703601c467032e3adcada00206511b9546d 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -18,6 +18,19 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; + spi3 = &msiof2; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -65,6 +78,111 @@ resets = <&cpg 408>; }; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; + irqc: interrupt-controller@e61c0000 { compatible = "renesas,irqc-r8a7745", "renesas,irqc"; #interrupt-cells = <2>; @@ -508,6 +626,317 @@ #size-cells = <0>; status = "disabled"; }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7745", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = ; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 812>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6520000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c5: i2c@e6528000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6528000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 925>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 925>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7745", + "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = ; + clocks = <&cpg CPG_MOD 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 315>; + reg-io-width = <4>; + max-frequency = <97500000>; + status = "disabled"; + }; + + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7745", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 917>; + status = "disabled"; + }; + + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7745", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 000>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 000>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7745", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 208>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7745", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 205>; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7745"; + reg = <0 0xee100000 0 0x328>; + interrupts = ; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7745"; + reg = <0 0xee140000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7745"; + reg = <0 0xee160000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7745", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7745", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x10800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x11000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7745", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; }; /* External root clock */ diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 8f3156c0e5754b090e6d06efe1d47faf95fda57a..a39472aab8672330c3ab0816525efd25333d0db6 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -33,6 +33,7 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <800000000>; + clocks = <&z_clk>; }; }; @@ -88,7 +89,7 @@ }; gpio0: gpio@ffc40000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc40000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -99,7 +100,7 @@ }; gpio1: gpio@ffc41000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc41000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -110,7 +111,7 @@ }; gpio2: gpio@ffc42000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc42000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -121,7 +122,7 @@ }; gpio3: gpio@ffc43000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc43000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -132,7 +133,7 @@ }; gpio4: gpio@ffc44000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc44000 0x2c>; interrupts = ; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 8ee0b2ca5d39a26556b570c6e529c1eeab2f42f3..e8eb94748b27efd2252598768240f2ed6fd1f5b6 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -29,12 +29,14 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; power-domains = <&sysc R8A7779_PD_ARM1>; }; cpu@2 { @@ -42,6 +44,7 @@ compatible = "arm,cortex-a9"; reg = <2>; clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; power-domains = <&sysc R8A7779_PD_ARM2>; }; cpu@3 { @@ -49,6 +52,7 @@ compatible = "arm,cortex-a9"; reg = <3>; clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; power-domains = <&sysc R8A7779_PD_ARM3>; }; }; @@ -76,7 +80,7 @@ }; gpio0: gpio@ffc40000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc40000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -87,7 +91,7 @@ }; gpio1: gpio@ffc41000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc41000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -98,7 +102,7 @@ }; gpio2: gpio@ffc42000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc42000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -109,7 +113,7 @@ }; gpio3: gpio@ffc43000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc43000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -120,7 +124,7 @@ }; gpio4: gpio@ffc44000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc44000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -131,7 +135,7 @@ }; gpio5: gpio@ffc45000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc45000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -142,7 +146,7 @@ }; gpio6: gpio@ffc46000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc46000 0x2c>; interrupts = ; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index ba100a6f67ca554c1b7068ba60e83090a0338ff4..e3d27783b6b56b42879b86a2eece9fe3ec6e3230 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -316,11 +316,8 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&mstp7_clks R8A7790_CLK_DU0>, - <&mstp7_clks R8A7790_CLK_DU1>, - <&mstp7_clks R8A7790_CLK_DU2>, - <&mstp7_clks R8A7790_CLK_LVDS0>, - <&mstp7_clks R8A7790_CLK_LVDS1>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>, <&x13_clk>, <&x2_clk>; clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", "dclkin.0", "dclkin.1"; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 16358bf8d1dbffdceceeb53124bf45dea8ae31ec..62baabd757b6ba010693b9b7d4cfc37a367819d8 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -10,7 +10,7 @@ * kind, whether express or implied. */ -#include +#include #include #include #include @@ -52,10 +52,11 @@ reg = <0>; clock-frequency = <1300000000>; voltage-tolerance = <1>; /* 1% */ - clocks = <&cpg_clocks R8A7790_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7790_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; /* kHz - uV - OPPs unknown yet */ operating-points = <1400000 1000000>, @@ -71,8 +72,10 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1300000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; power-domains = <&sysc R8A7790_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; }; cpu2: cpu@2 { @@ -80,8 +83,10 @@ compatible = "arm,cortex-a15"; reg = <2>; clock-frequency = <1300000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; power-domains = <&sysc R8A7790_PD_CA15_CPU2>; next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; }; cpu3: cpu@3 { @@ -89,8 +94,10 @@ compatible = "arm,cortex-a15"; reg = <3>; clock-frequency = <1300000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; power-domains = <&sysc R8A7790_PD_CA15_CPU3>; next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; }; cpu4: cpu@100 { @@ -98,8 +105,10 @@ compatible = "arm,cortex-a7"; reg = <0x100>; clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU0>; next-level-cache = <&L2_CA7>; + capacity-dmips-mhz = <539>; }; cpu5: cpu@101 { @@ -107,8 +116,10 @@ compatible = "arm,cortex-a7"; reg = <0x101>; clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU1>; next-level-cache = <&L2_CA7>; + capacity-dmips-mhz = <539>; }; cpu6: cpu@102 { @@ -116,8 +127,10 @@ compatible = "arm,cortex-a7"; reg = <0x102>; clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU2>; next-level-cache = <&L2_CA7>; + capacity-dmips-mhz = <539>; }; cpu7: cpu@103 { @@ -125,8 +138,10 @@ compatible = "arm,cortex-a7"; reg = <0x103>; clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU3>; next-level-cache = <&L2_CA7>; + capacity-dmips-mhz = <539>; }; L2_CA15: cache-controller-0 { @@ -185,13 +200,14 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = ; - clocks = <&mstp4_clks R8A7790_CLK_INTC_SYS>; + clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -199,12 +215,13 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7790_CLK_GPIO0>; + clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -212,12 +229,13 @@ gpio-ranges = <&pfc 0 32 30>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7790_CLK_GPIO1>; + clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -225,12 +243,13 @@ gpio-ranges = <&pfc 0 64 30>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7790_CLK_GPIO2>; + clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -238,12 +257,13 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7790_CLK_GPIO3>; + clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -251,12 +271,13 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7790_CLK_GPIO4>; + clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -264,8 +285,9 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7790_CLK_GPIO5>; + clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; thermal: thermal@e61f0000 { @@ -274,8 +296,9 @@ "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = ; - clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; + clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 522>; #thermal-sensor-cells = <0>; }; @@ -292,9 +315,10 @@ reg = <0 0xffca0000 0 0x1004>; interrupts = , ; - clocks = <&mstp1_clks R8A7790_CLK_CMT0>; + clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 124>; renesas,channels-mask = <0x60>; @@ -312,9 +336,10 @@ , , ; - clocks = <&mstp3_clks R8A7790_CLK_CMT1>; + clocks = <&cpg CPG_MOD 329>; clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 329>; renesas,channels-mask = <0xff>; @@ -330,8 +355,9 @@ , , ; - clocks = <&mstp4_clks R8A7790_CLK_IRQC>; + clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; dmac0: dma-controller@e6700000 { @@ -358,9 +384,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; + clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; }; @@ -389,9 +416,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; + clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; }; @@ -418,9 +446,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>; + clocks = <&cpg CPG_MOD 502>; clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <13>; }; @@ -447,9 +476,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>; + clocks = <&cpg CPG_MOD 501>; clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <13>; }; @@ -460,8 +490,9 @@ interrupts = ; interrupt-names = "ch0", "ch1"; - clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>; + clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 330>; #dma-cells = <1>; dma-channels = <2>; }; @@ -472,8 +503,9 @@ interrupts = ; interrupt-names = "ch0", "ch1"; - clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>; + clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 331>; #dma-cells = <1>; dma-channels = <2>; }; @@ -484,8 +516,9 @@ compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_I2C0>; + clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 931>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -496,8 +529,9 @@ compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_I2C1>; + clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 930>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -508,8 +542,9 @@ compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_I2C2>; + clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 929>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -520,8 +555,9 @@ compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_I2C3>; + clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 928>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -533,11 +569,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_IIC0>; + clocks = <&cpg CPG_MOD 318>; dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 318>; status = "disabled"; }; @@ -548,11 +585,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_IIC1>; + clocks = <&cpg CPG_MOD 323>; dmas = <&dmac0 0x65>, <&dmac0 0x66>, <&dmac1 0x65>, <&dmac1 0x66>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 323>; status = "disabled"; }; @@ -563,11 +601,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_IIC2>; + clocks = <&cpg CPG_MOD 300>; dmas = <&dmac0 0x69>, <&dmac0 0x6a>, <&dmac1 0x69>, <&dmac1 0x6a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 300>; status = "disabled"; }; @@ -578,11 +617,12 @@ "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; + clocks = <&cpg CPG_MOD 926>; dmas = <&dmac0 0x77>, <&dmac0 0x78>, <&dmac1 0x77>, <&dmac1 0x78>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 926>; status = "disabled"; }; @@ -590,11 +630,12 @@ compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; + clocks = <&cpg CPG_MOD 315>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 315>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -604,11 +645,12 @@ compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; + clocks = <&cpg CPG_MOD 305>; dmas = <&dmac0 0xe1>, <&dmac0 0xe2>, <&dmac1 0xe1>, <&dmac1 0xe2>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 305>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -623,12 +665,13 @@ compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee100000 0 0x328>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; + clocks = <&cpg CPG_MOD 314>; dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -636,12 +679,13 @@ compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee120000 0 0x328>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; + clocks = <&cpg CPG_MOD 313>; dmas = <&dmac0 0xc9>, <&dmac0 0xca>, <&dmac1 0xc9>, <&dmac1 0xca>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 313>; status = "disabled"; }; @@ -649,12 +693,13 @@ compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee140000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; + clocks = <&cpg CPG_MOD 312>; dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 312>; status = "disabled"; }; @@ -662,12 +707,13 @@ compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee160000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; + clocks = <&cpg CPG_MOD 311>; dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 311>; status = "disabled"; }; @@ -676,12 +722,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; + clocks = <&cpg CPG_MOD 204>; clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 204>; status = "disabled"; }; @@ -690,12 +737,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>; + clocks = <&cpg CPG_MOD 203>; clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>, <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 203>; status = "disabled"; }; @@ -704,12 +752,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>; + clocks = <&cpg CPG_MOD 202>; clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>, <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 202>; status = "disabled"; }; @@ -718,12 +767,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>; + clocks = <&cpg CPG_MOD 206>; clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 206>; status = "disabled"; }; @@ -732,12 +782,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>; + clocks = <&cpg CPG_MOD 207>; clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>, <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 207>; status = "disabled"; }; @@ -746,12 +797,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>; + clocks = <&cpg CPG_MOD 216>; clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 216>; status = "disabled"; }; @@ -760,13 +812,14 @@ "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 721>; status = "disabled"; }; @@ -775,13 +828,14 @@ "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 720>; status = "disabled"; }; @@ -790,13 +844,14 @@ "renesas,scif"; reg = <0 0xe6e56000 0 64>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 310>, <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 310>; status = "disabled"; }; @@ -805,13 +860,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 717>; status = "disabled"; }; @@ -820,13 +876,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 716>; status = "disabled"; }; @@ -852,8 +909,9 @@ compatible = "renesas,ether-r8a7790"; reg = <0 0xee700000 0 0x400>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_ETHER>; + clocks = <&cpg CPG_MOD 813>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 813>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -865,8 +923,9 @@ "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>; + clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 812>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -876,8 +935,9 @@ compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; reg = <0 0xee300000 0 0x2000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_SATA0>; + clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 815>; status = "disabled"; }; @@ -885,8 +945,9 @@ compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; reg = <0 0xee500000 0 0x2000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_SATA1>; + clocks = <&cpg CPG_MOD 814>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 814>; status = "disabled"; }; @@ -894,11 +955,12 @@ compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; + clocks = <&cpg CPG_MOD 704>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 704>; renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb"; @@ -911,9 +973,10 @@ reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; - clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; + clocks = <&cpg CPG_MOD 704>; clock-names = "usbhs"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 704>; status = "disabled"; usb0: usb-channel@0 { @@ -930,8 +993,9 @@ compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_VIN0>; + clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 811>; status = "disabled"; }; @@ -939,8 +1003,9 @@ compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_VIN1>; + clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 810>; status = "disabled"; }; @@ -948,8 +1013,9 @@ compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef2000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_VIN2>; + clocks = <&cpg CPG_MOD 809>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 809>; status = "disabled"; }; @@ -957,41 +1023,46 @@ compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef3000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_VIN3>; + clocks = <&cpg CPG_MOD 808>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 808>; status = "disabled"; }; - vsp1@fe920000 { + vsp@fe920000 { compatible = "renesas,vsp1"; reg = <0 0xfe920000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>; + clocks = <&cpg CPG_MOD 130>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 130>; }; - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>; + clocks = <&cpg CPG_MOD 131>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 131>; }; - vsp1@fe930000 { + vsp@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>; + clocks = <&cpg CPG_MOD 128>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 128>; }; - vsp1@fe938000 { + vsp@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>; + clocks = <&cpg CPG_MOD 127>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 127>; }; du: display@feb00000 { @@ -1003,11 +1074,9 @@ interrupts = , , ; - clocks = <&mstp7_clks R8A7790_CLK_DU0>, - <&mstp7_clks R8A7790_CLK_DU1>, - <&mstp7_clks R8A7790_CLK_DU2>, - <&mstp7_clks R8A7790_CLK_LVDS0>, - <&mstp7_clks R8A7790_CLK_LVDS1>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, <&cpg CPG_MOD 726>, + <&cpg CPG_MOD 725>; clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1"; status = "disabled"; @@ -1037,10 +1106,11 @@ compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_RCAN0>, - <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7790_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -1048,10 +1118,11 @@ compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_RCAN1>, - <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7790_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; @@ -1059,443 +1130,78 @@ compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu"; reg = <0 0xfe980000 0 0x10300>; interrupts = ; - clocks = <&mstp1_clks R8A7790_CLK_JPU>; + clocks = <&cpg CPG_MOD 106>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 106>; }; - clocks { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overriden by the board. */ - clock-frequency = <0>; - }; - - /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* - * The external audio clocks are configured as 0 Hz fixed frequency clocks by - * default. Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_b: audio_clk_b { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - /* Special CPG clocks */ - cpg_clocks: cpg_clocks@e6150000 { - compatible = "renesas,r8a7790-cpg-clocks", - "renesas,rcar-gen2-cpg-clocks"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk &usb_extal_clk>; - #clock-cells = <1>; - clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "sd1", - "z", "rcan", "adsp"; - #power-domain-cells = <0>; - }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Variable factor clocks */ - sd2_clk: sd2@e6150078 { - compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150078 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - sd3_clk: sd3@e615026c { - compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615026c 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - mmc0_clk: mmc0@e6150240 { - compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150240 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - mmc1_clk: mmc1@e6150244 { - compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150244 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - ssp_clk: ssp@e6150248 { - compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150248 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - ssprs_clk: ssprs@e615024c { - compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615024c 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; - /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - z2_clk: z2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - zg_clk: zg { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zx_clk: zx { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zs_clk: zs { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <6>; - clock-mult = <1>; - }; - hp_clk: hp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - i_clk: i { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - b_clk: b { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - p_clk: p { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <24>; - clock-mult = <1>; - }; - cl_clk: cl { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <48>; - clock-mult = <1>; - }; - m2_clk: m2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - imp_clk: imp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - }; - rclk_clk: rclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(48 * 1024)>; - clock-mult = <1>; - }; - oscclk_clk: oscclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(12 * 1024)>; - clock-mult = <1>; - }; - zb3_clk: zb3 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - }; - zb3d2_clk: zb3d2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - ddr_clk: ddr { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - mp_clk: mp { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <15>; - clock-mult = <1>; - }; - cp_clk: cp { - compatible = "fixed-factor-clock"; - clocks = <&extal_clk>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Gate clocks */ - mstp0_clks: mstp0_clks@e6150130 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; - clocks = <&mp_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "msiof0"; - }; - mstp1_clks: mstp1_clks@e6150134 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&m2_clk>, - <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>, <&zs_clk>, - <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, - <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_VCP1 R8A7790_CLK_VCP0 R8A7790_CLK_VPC1 - R8A7790_CLK_VPC0 R8A7790_CLK_JPU R8A7790_CLK_SSP1 - R8A7790_CLK_TMU1 R8A7790_CLK_3DG R8A7790_CLK_2DDMAC - R8A7790_CLK_FDP1_2 R8A7790_CLK_FDP1_1 R8A7790_CLK_FDP1_0 - R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 - R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0 - R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S - >; - clock-output-names = - "vcp1", "vcp0", "vpc1", "vpc0", "jpu", "ssp1", - "tmu1", "3dg", "2ddmac", "fdp1-2", "fdp1-1", - "fdp1-0", "tmu3", "tmu2", "cmt0", "tmu0", - "vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy"; - }; - mstp2_clks: mstp2_clks@e6150138 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>, - <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0 - R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1 - R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2 - R8A7790_CLK_SYS_DMAC1 R8A7790_CLK_SYS_DMAC0 - >; - clock-output-names = - "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "msiof3", "scifb2", - "sys-dmac1", "sys-dmac0"; - }; - mstp3_clks: mstp3_clks@e615013c { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&p_clk>, <&sd3_clk>, - <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>, - <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, - <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SCIF2 R8A7790_CLK_SDHI3 - R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 - R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1 - R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1 - >; - clock-output-names = - "iic2", "tpu0", "mmcif1", "scif2", "sdhi3", - "sdhi2", "sdhi1", "sdhi0", "mmcif0", - "iic0", "pciec", "iic1", "ssusb", "cmt1", - "usbdmac0", "usbdmac1"; - }; - mstp4_clks: mstp4_clks@e6150140 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "irqc", "intc-sys"; - }; - mstp5_clks: mstp5_clks@e6150144 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7790_CLK_ADSP>, - <&extal_clk>, <&p_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1 - R8A7790_CLK_ADSP_MOD R8A7790_CLK_THERMAL - R8A7790_CLK_PWM - >; - clock-output-names = "audmac0", "audmac1", "adsp_mod", - "thermal", "pwm"; - }; - mstp7_clks: mstp7_clks@e615014c { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, - <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, - <&zx_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1 - R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0 - R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0 - R8A7790_CLK_LVDS1 R8A7790_CLK_LVDS0 - >; - clock-output-names = - "ehci", "hsusb", "hscif1", "hscif0", "scif1", - "scif0", "du2", "du1", "du0", "lvds1", "lvds0"; - }; - mstp8_clks: mstp8_clks@e6150990 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, - <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>, - <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_MLB R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 - R8A7790_CLK_VIN1 R8A7790_CLK_VIN0 - R8A7790_CLK_ETHERAVB R8A7790_CLK_ETHER - R8A7790_CLK_SATA1 R8A7790_CLK_SATA0 - >; - clock-output-names = - "mlb", "vin3", "vin2", "vin1", "vin0", - "etheravb", "ether", "sata1", "sata0"; - }; - mstp9_clks: mstp9_clks@e6150994 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>, - <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3 - R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0 - R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS - R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0 - >; - clock-output-names = - "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", - "rcan1", "rcan0", "qspi_mod", "iic3", - "i2c3", "i2c2", "i2c1", "i2c0"; - }; - mstp10_clks: mstp10_clks@e6150998 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; - clocks = <&p_clk>, - <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&p_clk>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>; - - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_SSI_ALL - R8A7790_CLK_SSI9 R8A7790_CLK_SSI8 R8A7790_CLK_SSI7 R8A7790_CLK_SSI6 R8A7790_CLK_SSI5 - R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0 - R8A7790_CLK_SCU_ALL - R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0 - R8A7790_CLK_SCU_CTU1_MIX1 R8A7790_CLK_SCU_CTU0_MIX0 - R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5 - R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0 - >; - clock-output-names = - "ssi-all", - "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", - "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", - "scu-all", - "scu-dvc1", "scu-dvc0", - "scu-ctu1-mix1", "scu-ctu0-mix0", - "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", - "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; - }; + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7790-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; }; prr: chipid@ff000044 { @@ -1518,11 +1224,12 @@ compatible = "renesas,qspi-r8a7790", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; + clocks = <&cpg CPG_MOD 917>; dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 917>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -1534,11 +1241,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = ; - clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; + clocks = <&cpg CPG_MOD 0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>, <&dmac1 0x51>, <&dmac1 0x52>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1549,11 +1257,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; + clocks = <&cpg CPG_MOD 208>; dmas = <&dmac0 0x55>, <&dmac0 0x56>, <&dmac1 0x55>, <&dmac1 0x56>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 208>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1564,11 +1273,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e00000 0 0x0064>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; + clocks = <&cpg CPG_MOD 205>; dmas = <&dmac0 0x41>, <&dmac0 0x42>, <&dmac1 0x41>, <&dmac1 0x42>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 205>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1579,11 +1289,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6c90000 0 0x0064>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; + clocks = <&cpg CPG_MOD 215>; dmas = <&dmac0 0x45>, <&dmac0 0x46>, <&dmac1 0x45>, <&dmac1 0x46>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 215>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1593,8 +1304,9 @@ compatible = "renesas,xhci-r8a7790", "renesas,rcar-gen2-xhci"; reg = <0 0xee000000 0 0xc00>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; + clocks = <&cpg CPG_MOD 328>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 328>; phys = <&usb2 1>; phy-names = "usb"; status = "disabled"; @@ -1606,8 +1318,9 @@ reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; bus-range = <0 0>; @@ -1639,8 +1352,9 @@ reg = <0 0xee0b0000 0 0xc00>, <0 0xee0a0000 0 0x1100>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; bus-range = <1 1>; @@ -1657,8 +1371,9 @@ pci2: pci@ee0d0000 { compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; device_type = "pci"; - clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 703>; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; interrupts = ; @@ -1707,9 +1422,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 319>; status = "disabled"; }; @@ -1728,21 +1444,22 @@ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>, - <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>, - <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>, - <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>, - <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>, - <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>, - <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>, - <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>, - <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>, - <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>, - <&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>, - <&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>, - <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A7790_CLK_M2>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", @@ -1753,6 +1470,13 @@ "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 0ce0b278e1cbe2bf44113586460953edd6ab5f7d..e164eda69baf3fd02a8392cb432b4b9c00ec6f54 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -330,9 +330,7 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&mstp7_clks R8A7791_CLK_DU0>, - <&mstp7_clks R8A7791_CLK_DU1>, - <&mstp7_clks R8A7791_CLK_LVDS0>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>, <&x13_clk>, <&x2_clk>; clock-names = "du.0", "du.1", "lvds.0", "dclkin.0", "dclkin.1"; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 95da5cb9d37ab8e50fab028bca63782dd422bf7c..eb374956294f6983bf0132d8e83da7a3a0a6100b 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -419,9 +419,7 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&mstp7_clks R8A7791_CLK_DU0>, - <&mstp7_clks R8A7791_CLK_DU1>, - <&mstp7_clks R8A7791_CLK_LVDS0>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>, <&x3_clk>, <&x16_clk>; clock-names = "du.0", "du.1", "lvds.0", "dclkin.0", "dclkin.1"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index f1d1a977215308e6cc831a6062780810c150b8a8..67831d0405f34492ed5724ab9a2df2b0e1b95b05 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -10,7 +10,7 @@ * kind, whether express or implied. */ -#include +#include #include #include #include @@ -51,7 +51,7 @@ reg = <0>; clock-frequency = <1500000000>; voltage-tolerance = <1>; /* 1% */ - clocks = <&cpg_clocks R8A7791_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7791_CLK_Z>; clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7791_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; @@ -70,6 +70,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7791_CLK_Z>; power-domains = <&sysc R8A7791_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; @@ -117,13 +118,14 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = ; - clocks = <&mstp4_clks R8A7791_CLK_INTC_SYS>; + clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -131,12 +133,13 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO0>; + clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -144,12 +147,13 @@ gpio-ranges = <&pfc 0 32 26>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO1>; + clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -157,12 +161,13 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO2>; + clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -170,12 +175,13 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO3>; + clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -183,12 +189,13 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO4>; + clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -196,12 +203,13 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO5>; + clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055400 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -209,12 +217,13 @@ gpio-ranges = <&pfc 0 192 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO6>; + clocks = <&cpg CPG_MOD 905>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; gpio7: gpio@e6055800 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055800 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -222,8 +231,9 @@ gpio-ranges = <&pfc 0 224 26>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO7>; + clocks = <&cpg CPG_MOD 904>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 904>; }; thermal: thermal@e61f0000 { @@ -232,8 +242,9 @@ "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = ; - clocks = <&mstp5_clks R8A7791_CLK_THERMAL>; + clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 522>; #thermal-sensor-cells = <0>; }; @@ -250,9 +261,10 @@ reg = <0 0xffca0000 0 0x1004>; interrupts = , ; - clocks = <&mstp1_clks R8A7791_CLK_CMT0>; + clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 124>; renesas,channels-mask = <0x60>; @@ -270,9 +282,10 @@ , , ; - clocks = <&mstp3_clks R8A7791_CLK_CMT1>; + clocks = <&cpg CPG_MOD 329>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 329>; renesas,channels-mask = <0xff>; @@ -294,8 +307,9 @@ , , ; - clocks = <&mstp4_clks R8A7791_CLK_IRQC>; + clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; dmac0: dma-controller@e6700000 { @@ -322,9 +336,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>; + clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; }; @@ -353,9 +368,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>; + clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; }; @@ -382,9 +398,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>; + clocks = <&cpg CPG_MOD 502>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <13>; }; @@ -411,9 +428,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>; + clocks = <&cpg CPG_MOD 501>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <13>; }; @@ -424,8 +442,9 @@ interrupts = ; interrupt-names = "ch0", "ch1"; - clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>; + clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 330>; #dma-cells = <1>; dma-channels = <2>; }; @@ -436,8 +455,9 @@ interrupts = ; interrupt-names = "ch0", "ch1"; - clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>; + clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 331>; #dma-cells = <1>; dma-channels = <2>; }; @@ -449,8 +469,9 @@ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_I2C0>; + clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 931>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -461,8 +482,9 @@ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_I2C1>; + clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 930>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -473,8 +495,9 @@ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_I2C2>; + clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 929>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -485,8 +508,9 @@ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_I2C3>; + clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 928>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -497,8 +521,9 @@ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_I2C4>; + clocks = <&cpg CPG_MOD 927>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 927>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -510,8 +535,9 @@ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_I2C5>; + clocks = <&cpg CPG_MOD 925>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 925>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -524,11 +550,12 @@ "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; + clocks = <&cpg CPG_MOD 926>; dmas = <&dmac0 0x77>, <&dmac0 0x78>, <&dmac1 0x77>, <&dmac1 0x78>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 926>; status = "disabled"; }; @@ -539,11 +566,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_IIC0>; + clocks = <&cpg CPG_MOD 318>; dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 318>; status = "disabled"; }; @@ -554,11 +582,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_IIC1>; + clocks = <&cpg CPG_MOD 323>; dmas = <&dmac0 0x65>, <&dmac0 0x66>, <&dmac1 0x65>, <&dmac1 0x66>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 323>; status = "disabled"; }; @@ -571,11 +600,12 @@ compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>; + clocks = <&cpg CPG_MOD 315>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 315>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -585,12 +615,13 @@ compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee100000 0 0x328>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; + clocks = <&cpg CPG_MOD 314>; dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -598,12 +629,13 @@ compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee140000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; + clocks = <&cpg CPG_MOD 312>; dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 312>; status = "disabled"; }; @@ -611,12 +643,13 @@ compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee160000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; + clocks = <&cpg CPG_MOD 311>; dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 311>; status = "disabled"; }; @@ -625,12 +658,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>; + clocks = <&cpg CPG_MOD 204>; clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 204>; status = "disabled"; }; @@ -639,12 +673,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>; + clocks = <&cpg CPG_MOD 203>; clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>, <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 203>; status = "disabled"; }; @@ -653,12 +688,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>; + clocks = <&cpg CPG_MOD 202>; clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>, <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 202>; status = "disabled"; }; @@ -667,12 +703,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>; + clocks = <&cpg CPG_MOD 1106>; clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, <&dmac1 0x1b>, <&dmac1 0x1c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 1106>; status = "disabled"; }; @@ -681,12 +718,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>; + clocks = <&cpg CPG_MOD 1107>; clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>, <&dmac1 0x1f>, <&dmac1 0x20>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 1107>; status = "disabled"; }; @@ -695,12 +733,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>; + clocks = <&cpg CPG_MOD 1108>; clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>, <&dmac1 0x23>, <&dmac1 0x24>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 1108>; status = "disabled"; }; @@ -709,12 +748,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>; + clocks = <&cpg CPG_MOD 206>; clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 206>; status = "disabled"; }; @@ -723,12 +763,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>; + clocks = <&cpg CPG_MOD 207>; clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>, <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 207>; status = "disabled"; }; @@ -737,12 +778,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>; + clocks = <&cpg CPG_MOD 216>; clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 216>; status = "disabled"; }; @@ -751,13 +793,14 @@ "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 721>; status = "disabled"; }; @@ -766,22 +809,24 @@ "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 720>; status = "disabled"; }; adc: adc@e6e54000 { compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; reg = <0 0xe6e54000 0 64>; - clocks = <&mstp9_clks R8A7791_CLK_GYROADC>; + clocks = <&cpg CPG_MOD 901>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 901>; status = "disabled"; }; @@ -790,13 +835,14 @@ "renesas,scif"; reg = <0 0xe6e58000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 719>; status = "disabled"; }; @@ -805,13 +851,14 @@ "renesas,scif"; reg = <0 0xe6ea8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>, + clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 718>; status = "disabled"; }; @@ -820,13 +867,14 @@ "renesas,scif"; reg = <0 0xe6ee0000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>, + clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 715>; status = "disabled"; }; @@ -835,13 +883,14 @@ "renesas,scif"; reg = <0 0xe6ee8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>, + clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 714>; status = "disabled"; }; @@ -850,13 +899,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 717>; status = "disabled"; }; @@ -865,13 +915,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 716>; status = "disabled"; }; @@ -880,13 +931,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, <&dmac1 0x3b>, <&dmac1 0x3c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 713>; status = "disabled"; }; @@ -912,8 +964,9 @@ compatible = "renesas,ether-r8a7791"; reg = <0 0xee700000 0 0x400>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_ETHER>; + clocks = <&cpg CPG_MOD 813>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 813>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -925,8 +978,9 @@ "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>; + clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 812>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -936,8 +990,9 @@ compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; reg = <0 0xee300000 0 0x2000>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_SATA0>; + clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 815>; status = "disabled"; }; @@ -945,8 +1000,9 @@ compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; reg = <0 0xee500000 0 0x2000>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_SATA1>; + clocks = <&cpg CPG_MOD 814>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 814>; status = "disabled"; }; @@ -954,11 +1010,12 @@ compatible = "renesas,usbhs-r8a7791", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; + clocks = <&cpg CPG_MOD 704>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 704>; renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb"; @@ -971,9 +1028,10 @@ reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; - clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; + clocks = <&cpg CPG_MOD 704>; clock-names = "usbhs"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 704>; status = "disabled"; usb0: usb-channel@0 { @@ -990,8 +1048,9 @@ compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_VIN0>; + clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 811>; status = "disabled"; }; @@ -999,8 +1058,9 @@ compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_VIN1>; + clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 810>; status = "disabled"; }; @@ -1008,33 +1068,37 @@ compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef2000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_VIN2>; + clocks = <&cpg CPG_MOD 809>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 809>; status = "disabled"; }; - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>; + clocks = <&cpg CPG_MOD 131>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 131>; }; - vsp1@fe930000 { + vsp@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>; + clocks = <&cpg CPG_MOD 128>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 128>; }; - vsp1@fe938000 { + vsp@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>; + clocks = <&cpg CPG_MOD 127>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 127>; }; du: display@feb00000 { @@ -1044,9 +1108,9 @@ reg-names = "du", "lvds.0"; interrupts = , ; - clocks = <&mstp7_clks R8A7791_CLK_DU0>, - <&mstp7_clks R8A7791_CLK_DU1>, - <&mstp7_clks R8A7791_CLK_LVDS0>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 726>; clock-names = "du.0", "du.1", "lvds.0"; status = "disabled"; @@ -1071,10 +1135,11 @@ compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, - <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7791_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -1082,10 +1147,11 @@ compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_RCAN1>, - <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7791_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; @@ -1093,435 +1159,78 @@ compatible = "renesas,jpu-r8a7791", "renesas,rcar-gen2-jpu"; reg = <0 0xfe980000 0 0x10300>; interrupts = ; - clocks = <&mstp1_clks R8A7791_CLK_JPU>; + clocks = <&cpg CPG_MOD 106>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 106>; }; - clocks { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overriden by the board. */ - clock-frequency = <0>; - }; - - /* - * The external audio clocks are configured as 0 Hz fixed frequency clocks by - * default. Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_b: audio_clk_b { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - /* Special CPG clocks */ - cpg_clocks: cpg_clocks@e6150000 { - compatible = "renesas,r8a7791-cpg-clocks", - "renesas,rcar-gen2-cpg-clocks"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk &usb_extal_clk>; - #clock-cells = <1>; - clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "z", - "rcan", "adsp"; - #power-domain-cells = <0>; - }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Variable factor clocks */ - sd2_clk: sd2@e6150078 { - compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150078 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - sd3_clk: sd3@e615026c { - compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615026c 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - mmc0_clk: mmc0@e6150240 { - compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150240 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - ssp_clk: ssp@e6150248 { - compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150248 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - ssprs_clk: ssprs@e615024c { - compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615024c 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; - /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - zg_clk: zg { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zx_clk: zx { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zs_clk: zs { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <6>; - clock-mult = <1>; - }; - hp_clk: hp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - i_clk: i { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - b_clk: b { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - p_clk: p { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <24>; - clock-mult = <1>; - }; - cl_clk: cl { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <48>; - clock-mult = <1>; - }; - m2_clk: m2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - rclk_clk: rclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(48 * 1024)>; - clock-mult = <1>; - }; - oscclk_clk: oscclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(12 * 1024)>; - clock-mult = <1>; - }; - zb3_clk: zb3 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - }; - zb3d2_clk: zb3d2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - ddr_clk: ddr { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - mp_clk: mp { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <15>; - clock-mult = <1>; - }; - cp_clk: cp { - compatible = "fixed-factor-clock"; - clocks = <&extal_clk>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Gate clocks */ - mstp0_clks: mstp0_clks@e6150130 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; - clocks = <&mp_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "msiof0"; - }; - mstp1_clks: mstp1_clks@e6150134 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&zs_clk>, <&zs_clk>, <&m2_clk>, <&zs_clk>, <&p_clk>, - <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, - <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, - <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_VCP0 R8A7791_CLK_VPC0 R8A7791_CLK_JPU - R8A7791_CLK_SSP1 R8A7791_CLK_TMU1 R8A7791_CLK_3DG - R8A7791_CLK_2DDMAC R8A7791_CLK_FDP1_1 R8A7791_CLK_FDP1_0 - R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 - R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 R8A7791_CLK_VSP1_DU0 - R8A7791_CLK_VSP1_S - >; - clock-output-names = - "vcp0", "vpc0", "jpu", "ssp1", "tmu1", "3dg", - "2ddmac", "fdp1-1", "fdp1-0", "tmu3", "tmu2", "cmt0", - "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-sy"; - }; - mstp2_clks: mstp2_clks@e6150138 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0 - R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1 - R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2 - R8A7791_CLK_SYS_DMAC1 R8A7791_CLK_SYS_DMAC0 - >; - clock-output-names = - "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "scifb2", - "sys-dmac1", "sys-dmac0"; - }; - mstp3_clks: mstp3_clks@e615013c { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7791_CLK_SD0>, - <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, - <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 - R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1 - R8A7791_CLK_SSUSB R8A7791_CLK_CMT1 - R8A7791_CLK_USBDMAC0 R8A7791_CLK_USBDMAC1 - >; - clock-output-names = - "tpu0", "sdhi2", "sdhi1", "sdhi0", - "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1", - "usbdmac0", "usbdmac1"; - }; - mstp4_clks: mstp4_clks@e6150140 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "irqc", "intc-sys"; - }; - mstp5_clks: mstp5_clks@e6150144 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7791_CLK_ADSP>, - <&extal_clk>, <&p_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1 - R8A7791_CLK_ADSP_MOD R8A7791_CLK_THERMAL - R8A7791_CLK_PWM - >; - clock-output-names = "audmac0", "audmac1", "adsp_mod", - "thermal", "pwm"; - }; - mstp7_clks: mstp7_clks@e615014c { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, - <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&zx_clk>, <&zx_clk>, <&zx_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5 - R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0 - R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1 - R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0 - R8A7791_CLK_LVDS0 - >; - clock-output-names = - "ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", - "scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0"; - }; - mstp8_clks: mstp8_clks@e6150990 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zx_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>, - <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>, - <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_IPMMU_SGX R8A7791_CLK_MLB - R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0 - R8A7791_CLK_ETHERAVB R8A7791_CLK_ETHER - R8A7791_CLK_SATA1 R8A7791_CLK_SATA0 - >; - clock-output-names = - "ipmmu_sgx", "mlb", "vin2", "vin1", "vin0", - "etheravb", "ether", "sata1", "sata0"; - }; - mstp9_clks: mstp9_clks@e6150994 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&p_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>, - <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, - <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_GYROADC - R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4 - R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0 - R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5 - R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2 - R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 - >; - clock-output-names = - "gyroadc", - "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", - "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2", - "i2c1", "i2c0"; - }; - mstp10_clks: mstp10_clks@e6150998 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; - clocks = <&p_clk>, - <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, - <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, - <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, - <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, - <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, - <&p_clk>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>; - - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_SSI_ALL - R8A7791_CLK_SSI9 R8A7791_CLK_SSI8 R8A7791_CLK_SSI7 R8A7791_CLK_SSI6 R8A7791_CLK_SSI5 - R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0 - R8A7791_CLK_SCU_ALL - R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0 - R8A7791_CLK_SCU_CTU1_MIX1 R8A7791_CLK_SCU_CTU0_MIX0 - R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5 - R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0 - >; - clock-output-names = - "ssi-all", - "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", - "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", - "scu-all", - "scu-dvc1", "scu-dvc0", - "scu-ctu1-mix1", "scu-ctu0-mix0", - "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", - "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; - }; - mstp11_clks: mstp11_clks@e615099c { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5 - >; - clock-output-names = "scifa3", "scifa4", "scifa5"; - }; + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7791-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; }; rst: reset-controller@e6160000 { @@ -1544,11 +1253,12 @@ compatible = "renesas,qspi-r8a7791", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; + clocks = <&cpg CPG_MOD 917>; dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 917>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -1560,11 +1270,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = ; - clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; + clocks = <&cpg CPG_MOD 000>; dmas = <&dmac0 0x51>, <&dmac0 0x52>, <&dmac1 0x51>, <&dmac1 0x52>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1575,11 +1286,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; + clocks = <&cpg CPG_MOD 208>; dmas = <&dmac0 0x55>, <&dmac0 0x56>, <&dmac1 0x55>, <&dmac1 0x56>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 208>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1590,11 +1302,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e00000 0 0x0064>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; + clocks = <&cpg CPG_MOD 205>; dmas = <&dmac0 0x41>, <&dmac0 0x42>, <&dmac1 0x41>, <&dmac1 0x42>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 205>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1604,8 +1317,9 @@ compatible = "renesas,xhci-r8a7791", "renesas,rcar-gen2-xhci"; reg = <0 0xee000000 0 0xc00>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; + clocks = <&cpg CPG_MOD 328>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 328>; phys = <&usb2 1>; phy-names = "usb"; status = "disabled"; @@ -1617,8 +1331,9 @@ reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; bus-range = <0 0>; @@ -1650,8 +1365,9 @@ reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; bus-range = <1 1>; @@ -1697,9 +1413,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 319>; status = "disabled"; }; @@ -1778,21 +1495,22 @@ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - clocks = <&mstp10_clks R8A7791_CLK_SSI_ALL>, - <&mstp10_clks R8A7791_CLK_SSI9>, <&mstp10_clks R8A7791_CLK_SSI8>, - <&mstp10_clks R8A7791_CLK_SSI7>, <&mstp10_clks R8A7791_CLK_SSI6>, - <&mstp10_clks R8A7791_CLK_SSI5>, <&mstp10_clks R8A7791_CLK_SSI4>, - <&mstp10_clks R8A7791_CLK_SSI3>, <&mstp10_clks R8A7791_CLK_SSI2>, - <&mstp10_clks R8A7791_CLK_SSI1>, <&mstp10_clks R8A7791_CLK_SSI0>, - <&mstp10_clks R8A7791_CLK_SCU_SRC9>, <&mstp10_clks R8A7791_CLK_SCU_SRC8>, - <&mstp10_clks R8A7791_CLK_SCU_SRC7>, <&mstp10_clks R8A7791_CLK_SCU_SRC6>, - <&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>, - <&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>, - <&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>, - <&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>, - <&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>, - <&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A7791_CLK_M2>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", @@ -1803,6 +1521,13 @@ "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index f3ea43b7b7243127b36cb783eb2ad082598fb5e2..9b67dca6c9ef550d49e2224c880c61eb5925f568 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -310,8 +310,7 @@ pinctrl-0 = <&du0_pins &du1_pins>; pinctrl-names = "default"; - clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>, - <&x1_clk>, <&x2_clk>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>; clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; status = "okay"; diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts index c24f26fdab1f8c1e67a186acb373b0cce3f52ada..b9471b67b72829de871def622002bcaf6ddbed8e 100644 --- a/arch/arm/boot/dts/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/r8a7792-wheat.dts @@ -305,8 +305,7 @@ pinctrl-0 = <&du0_pins &du1_pins>; pinctrl-names = "default"; - clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>, - <&osc2_clk>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&osc2_clk>; clock-names = "du.0", "du.1", "dclkin.0"; status = "okay"; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 2623f39bed2b73bb6f180a72e89586702a90f2cc..3d080e07374ca609d367d09642595ff11f9c6629 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -8,7 +8,7 @@ * kind, whether express or implied. */ -#include +#include #include #include #include @@ -46,7 +46,7 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1000000000>; - clocks = <&z_clk>; + clocks = <&cpg CPG_CORE R8A7792_CLK_Z>; power-domains = <&sysc R8A7792_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; }; @@ -56,6 +56,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A7792_CLK_Z>; power-domains = <&sysc R8A7792_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; @@ -92,9 +93,10 @@ <0 0xf1006000 0 0x2000>; interrupts = ; - clocks = <&mstp4_clks R8A7792_CLK_INTC_SYS>; + clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; irqc: interrupt-controller@e61c0000 { @@ -106,8 +108,9 @@ , , ; - clocks = <&mstp4_clks R8A7792_CLK_IRQC>; + clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; timer { @@ -145,7 +148,7 @@ gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -153,13 +156,14 @@ gpio-ranges = <&pfc 0 0 29>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO0>; + clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -167,13 +171,14 @@ gpio-ranges = <&pfc 0 32 23>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO1>; + clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -181,13 +186,14 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO2>; + clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -195,13 +201,14 @@ gpio-ranges = <&pfc 0 96 28>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO3>; + clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -209,13 +216,14 @@ gpio-ranges = <&pfc 0 128 17>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO4>; + clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -223,13 +231,14 @@ gpio-ranges = <&pfc 0 160 17>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO5>; + clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055100 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055100 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -237,13 +246,14 @@ gpio-ranges = <&pfc 0 192 17>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO6>; + clocks = <&cpg CPG_MOD 905>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; gpio7: gpio@e6055200 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055200 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -251,13 +261,14 @@ gpio-ranges = <&pfc 0 224 17>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO7>; + clocks = <&cpg CPG_MOD 904>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 904>; }; gpio8: gpio@e6055300 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055300 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -265,13 +276,14 @@ gpio-ranges = <&pfc 0 256 17>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO8>; + clocks = <&cpg CPG_MOD 921>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 921>; }; gpio9: gpio@e6055400 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -279,13 +291,14 @@ gpio-ranges = <&pfc 0 288 17>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO9>; + clocks = <&cpg CPG_MOD 919>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 919>; }; gpio10: gpio@e6055500 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055500 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -293,13 +306,14 @@ gpio-ranges = <&pfc 0 320 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO10>; + clocks = <&cpg CPG_MOD 914>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 914>; }; gpio11: gpio@e6055600 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055600 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -307,8 +321,9 @@ gpio-ranges = <&pfc 0 352 30>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO11>; + clocks = <&cpg CPG_MOD 913>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 913>; }; dmac0: dma-controller@e6700000 { @@ -336,9 +351,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC0>; + clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; }; @@ -368,9 +384,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC1>; + clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; }; @@ -380,13 +397,14 @@ "renesas,rcar-gen2-scif", "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7792_CLK_SCIF0>, <&zs_clk>, - <&scif_clk>; + clocks = <&cpg CPG_MOD 721>, + <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 721>; status = "disabled"; }; @@ -395,13 +413,14 @@ "renesas,rcar-gen2-scif", "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7792_CLK_SCIF1>, <&zs_clk>, - <&scif_clk>; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 720>; status = "disabled"; }; @@ -410,13 +429,14 @@ "renesas,rcar-gen2-scif", "renesas,scif"; reg = <0 0xe6e58000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7792_CLK_SCIF2>, <&zs_clk>, - <&scif_clk>; + clocks = <&cpg CPG_MOD 719>, + <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 719>; status = "disabled"; }; @@ -425,13 +445,14 @@ "renesas,rcar-gen2-scif", "renesas,scif"; reg = <0 0xe6ea8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7792_CLK_SCIF3>, <&zs_clk>, - <&scif_clk>; + clocks = <&cpg CPG_MOD 718>, + <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 718>; status = "disabled"; }; @@ -440,13 +461,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7792_CLK_HSCIF0>, <&zs_clk>, - <&scif_clk>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 717>; status = "disabled"; }; @@ -455,13 +477,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7792_CLK_HSCIF1>, <&zs_clk>, - <&scif_clk>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 716>; status = "disabled"; }; @@ -490,8 +513,9 @@ dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; - clocks = <&mstp3_clks R8A7792_CLK_SDHI0>; + clocks = <&cpg CPG_MOD 314>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -500,8 +524,9 @@ "renesas,rcar-gen2-jpu"; reg = <0 0xfe980000 0 0x10300>; interrupts = ; - clocks = <&mstp1_clks R8A7792_CLK_JPU>; + clocks = <&cpg CPG_MOD 106>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 106>; }; avb: ethernet@e6800000 { @@ -509,8 +534,9 @@ "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_ETHERAVB>; + clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 812>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -522,8 +548,9 @@ "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_I2C0>; + clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 931>; i2c-scl-internal-delay-ns = <6>; #address-cells = <1>; #size-cells = <0>; @@ -535,8 +562,9 @@ "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_I2C1>; + clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 930>; i2c-scl-internal-delay-ns = <6>; #address-cells = <1>; #size-cells = <0>; @@ -548,8 +576,9 @@ "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_I2C2>; + clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 929>; i2c-scl-internal-delay-ns = <6>; #address-cells = <1>; #size-cells = <0>; @@ -561,8 +590,9 @@ "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_I2C3>; + clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 928>; i2c-scl-internal-delay-ns = <6>; #address-cells = <1>; #size-cells = <0>; @@ -574,8 +604,9 @@ "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_I2C4>; + clocks = <&cpg CPG_MOD 927>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 927>; i2c-scl-internal-delay-ns = <6>; #address-cells = <1>; #size-cells = <0>; @@ -587,8 +618,9 @@ "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_I2C5>; + clocks = <&cpg CPG_MOD 925>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 925>; i2c-scl-internal-delay-ns = <110>; #address-cells = <1>; #size-cells = <0>; @@ -599,11 +631,12 @@ compatible = "renesas,qspi-r8a7792", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_QSPI_MOD>; + clocks = <&cpg CPG_MOD 917>; dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 917>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -615,11 +648,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = ; - clocks = <&mstp0_clks R8A7792_CLK_MSIOF0>; + clocks = <&cpg CPG_MOD 000>; dmas = <&dmac0 0x51>, <&dmac0 0x52>, <&dmac1 0x51>, <&dmac1 0x52>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 000>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -630,11 +664,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = ; - clocks = <&mstp2_clks R8A7792_CLK_MSIOF1>; + clocks = <&cpg CPG_MOD 208>; dmas = <&dmac0 0x55>, <&dmac0 0x56>, <&dmac1 0x55>, <&dmac1 0x56>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 208>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -646,8 +681,8 @@ reg-names = "du"; interrupts = , ; - clocks = <&mstp7_clks R8A7792_CLK_DU0>, - <&mstp7_clks R8A7792_CLK_DU1>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; status = "disabled"; @@ -673,10 +708,11 @@ "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_CAN0>, - <&rcan_clk>, <&can_clk>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -685,10 +721,11 @@ "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_CAN1>, - <&rcan_clk>, <&can_clk>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; @@ -697,8 +734,9 @@ "renesas,rcar-gen2-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_VIN0>; + clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 811>; status = "disabled"; }; @@ -707,8 +745,9 @@ "renesas,rcar-gen2-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_VIN1>; + clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 810>; status = "disabled"; }; @@ -717,8 +756,9 @@ "renesas,rcar-gen2-vin"; reg = <0 0xe6ef2000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_VIN2>; + clocks = <&cpg CPG_MOD 809>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 809>; status = "disabled"; }; @@ -727,8 +767,9 @@ "renesas,rcar-gen2-vin"; reg = <0 0xe6ef3000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_VIN3>; + clocks = <&cpg CPG_MOD 808>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 808>; status = "disabled"; }; @@ -737,8 +778,9 @@ "renesas,rcar-gen2-vin"; reg = <0 0xe6ef4000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_VIN4>; + clocks = <&cpg CPG_MOD 805>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 805>; status = "disabled"; }; @@ -747,253 +789,47 @@ "renesas,rcar-gen2-vin"; reg = <0 0xe6ef5000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_VIN5>; + clocks = <&cpg CPG_MOD 804>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 804>; status = "disabled"; }; - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7792_CLK_VSP1_SY>; + clocks = <&cpg CPG_MOD 131>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 131>; }; - vsp1@fe930000 { + vsp@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7792_CLK_VSP1DU0>; + clocks = <&cpg CPG_MOD 128>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 128>; }; - vsp1@fe938000 { + vsp@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7792_CLK_VSP1DU1>; + clocks = <&cpg CPG_MOD 127>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 127>; }; - /* Special CPG clocks */ - cpg_clocks: cpg_clocks@e6150000 { - compatible = "renesas,r8a7792-cpg-clocks", - "renesas,rcar-gen2-cpg-clocks"; + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7792-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; clocks = <&extal_clk>; - #clock-cells = <1>; - clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi"; + clock-names = "extal"; + #clock-cells = <2>; #power-domain-cells = <0>; - }; - - /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - z_clk: z { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL0>; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - }; - zx_clk: zx { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zs_clk: zs { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <6>; - clock-mult = <1>; - }; - hp_clk: hp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - p_clk: p { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <24>; - clock-mult = <1>; - }; - cp_clk: cp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <48>; - clock-mult = <1>; - }; - mp_clk: mp { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <15>; - clock-mult = <1>; - }; - m2_clk: m2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - sd_clk: sd { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - rcan_clk: rcan { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <49>; - clock-mult = <1>; - }; - zg_clk: zg { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <5>; - clock-mult = <1>; - }; - - /* Gate clocks */ - mstp0_clks: mstp0_clks@e6150130 { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; - clocks = <&mp_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "msiof0"; - }; - mstp1_clks: mstp1_clks@e6150134 { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&m2_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7792_CLK_JPU - R8A7792_CLK_VSP1DU1 R8A7792_CLK_VSP1DU0 - R8A7792_CLK_VSP1_SY - >; - clock-output-names = "jpu", "vsp1du1", "vsp1du0", - "vsp1-sy"; - }; - mstp2_clks: mstp2_clks@e6150138 { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; - clocks = <&mp_clk>, <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7792_CLK_MSIOF1 - R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0 - >; - clock-output-names = "msiof1", "sys-dmac1", "sys-dmac0"; - }; - mstp3_clks: mstp3_clks@e615013c { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&sd_clk>; - #clock-cells = <1>; - renesas,clock-indices = ; - clock-output-names = "sdhi0"; - }; - mstp4_clks: mstp4_clks@e6150140 { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7792_CLK_IRQC R8A7792_CLK_INTC_SYS - >; - clock-output-names = "irqc", "intc-sys"; - }; - mstp7_clks: mstp7_clks@e615014c { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, - <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0 - R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2 - R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0 - R8A7792_CLK_DU1 R8A7792_CLK_DU0 - >; - clock-output-names = "hscif1", "hscif0", "scif3", - "scif2", "scif1", "scif0", - "du1", "du0"; - }; - mstp8_clks: mstp8_clks@e6150990 { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, - <&zg_clk>, <&zg_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7792_CLK_VIN5 R8A7792_CLK_VIN4 - R8A7792_CLK_VIN3 R8A7792_CLK_VIN2 - R8A7792_CLK_VIN1 R8A7792_CLK_VIN0 - R8A7792_CLK_ETHERAVB - >; - clock-output-names = "vin5", "vin4", "vin3", "vin2", - "vin1", "vin0", "etheravb"; - }; - mstp9_clks: mstp9_clks@e6150994 { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&p_clk>, <&p_clk>, - <&cpg_clocks R8A7792_CLK_QSPI>, - <&cp_clk>, <&cp_clk>, <&hp_clk>, <&hp_clk>, - <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7792_CLK_GPIO7 R8A7792_CLK_GPIO6 - R8A7792_CLK_GPIO5 R8A7792_CLK_GPIO4 - R8A7792_CLK_GPIO3 R8A7792_CLK_GPIO2 - R8A7792_CLK_GPIO1 R8A7792_CLK_GPIO0 - R8A7792_CLK_GPIO11 R8A7792_CLK_GPIO10 - R8A7792_CLK_CAN1 R8A7792_CLK_CAN0 - R8A7792_CLK_QSPI_MOD - R8A7792_CLK_GPIO9 R8A7792_CLK_GPIO8 - R8A7792_CLK_I2C5 R8A7792_CLK_I2C4 - R8A7792_CLK_I2C3 R8A7792_CLK_I2C2 - R8A7792_CLK_I2C1 R8A7792_CLK_I2C0 - >; - clock-output-names = - "gpio7", "gpio6", "gpio5", "gpio4", - "gpio3", "gpio2", "gpio1", "gpio0", - "gpio11", "gpio10", "can1", "can0", - "qspi_mod", "gpio9", "gpio8", - "i2c5", "i2c4", "i2c3", "i2c2", - "i2c1", "i2c0"; + #reset-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 76e3aca2029e5f66de3263a1bf5273a0e5b119b0..51b3ffac8efaad1dbdc53ebe220f59c194f8585e 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -303,9 +303,7 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&mstp7_clks R8A7793_CLK_DU0>, - <&mstp7_clks R8A7793_CLK_DU1>, - <&mstp7_clks R8A7793_CLK_LVDS0>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>, <&x13_clk>, <&x2_clk>; clock-names = "du.0", "du.1", "lvds.0", "dclkin.0", "dclkin.1"; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 497716b6fbe2416423b53b2fd3be3303bc60c92c..0cd1035de1a4bd4906eafae6586a596a184a3b84 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -8,7 +8,7 @@ * kind, whether express or implied. */ -#include +#include #include #include #include @@ -43,7 +43,7 @@ reg = <0>; clock-frequency = <1500000000>; voltage-tolerance = <1>; /* 1% */ - clocks = <&cpg_clocks R8A7793_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7793_CLK_Z>; clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7793_PD_CA15_CPU0>; @@ -62,6 +62,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7793_CLK_Z>; power-domains = <&sysc R8A7793_PD_CA15_CPU1>; }; @@ -108,13 +109,14 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = ; - clocks = <&mstp4_clks R8A7793_CLK_INTC_SYS>; + clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -122,12 +124,13 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO0>; + clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -135,12 +138,13 @@ gpio-ranges = <&pfc 0 32 26>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO1>; + clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -148,12 +152,13 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO2>; + clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -161,12 +166,13 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO3>; + clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -174,12 +180,13 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO4>; + clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -187,12 +194,13 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO5>; + clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055400 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -200,12 +208,13 @@ gpio-ranges = <&pfc 0 192 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO6>; + clocks = <&cpg CPG_MOD 905>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; gpio7: gpio@e6055800 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055800 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -213,8 +222,9 @@ gpio-ranges = <&pfc 0 224 26>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO7>; + clocks = <&cpg CPG_MOD 904>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 904>; }; thermal: thermal@e61f0000 { @@ -223,8 +233,9 @@ "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = ; - clocks = <&mstp5_clks R8A7793_CLK_THERMAL>; + clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 522>; #thermal-sensor-cells = <0>; }; @@ -241,9 +252,10 @@ reg = <0 0xffca0000 0 0x1004>; interrupts = , ; - clocks = <&mstp1_clks R8A7793_CLK_CMT0>; + clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 124>; renesas,channels-mask = <0x60>; @@ -261,9 +273,10 @@ , , ; - clocks = <&mstp3_clks R8A7793_CLK_CMT1>; + clocks = <&cpg CPG_MOD 329>; clock-names = "fck"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 329>; renesas,channels-mask = <0xff>; @@ -285,8 +298,9 @@ , , ; - clocks = <&mstp4_clks R8A7793_CLK_IRQC>; + clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; dmac0: dma-controller@e6700000 { @@ -313,9 +327,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>; + clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; }; @@ -344,9 +359,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>; + clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; }; @@ -373,9 +389,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>; + clocks = <&cpg CPG_MOD 502>; clock-names = "fck"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <13>; }; @@ -402,9 +419,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>; + clocks = <&cpg CPG_MOD 501>; clock-names = "fck"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <13>; }; @@ -416,8 +434,9 @@ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_I2C0>; + clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 931>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -428,8 +447,9 @@ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_I2C1>; + clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 930>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -440,8 +460,9 @@ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_I2C2>; + clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 929>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -452,8 +473,9 @@ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_I2C3>; + clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 928>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -464,8 +486,9 @@ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_I2C4>; + clocks = <&cpg CPG_MOD 927>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 927>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -477,8 +500,9 @@ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_I2C5>; + clocks = <&cpg CPG_MOD 925>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 925>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -491,11 +515,12 @@ "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>; + clocks = <&cpg CPG_MOD 926>; dmas = <&dmac0 0x77>, <&dmac0 0x78>, <&dmac1 0x77>, <&dmac1 0x78>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 926>; status = "disabled"; }; @@ -506,11 +531,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7793_CLK_IIC0>; + clocks = <&cpg CPG_MOD 318>; dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 318>; status = "disabled"; }; @@ -521,11 +547,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7793_CLK_IIC1>; + clocks = <&cpg CPG_MOD 323>; dmas = <&dmac0 0x65>, <&dmac0 0x66>, <&dmac1 0x65>, <&dmac1 0x66>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 323>; status = "disabled"; }; @@ -538,12 +565,13 @@ compatible = "renesas,sdhi-r8a7793"; reg = <0 0xee100000 0 0x328>; interrupts = ; - clocks = <&mstp3_clks R8A7793_CLK_SDHI0>; + clocks = <&cpg CPG_MOD 314>; dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -551,12 +579,13 @@ compatible = "renesas,sdhi-r8a7793"; reg = <0 0xee140000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7793_CLK_SDHI1>; + clocks = <&cpg CPG_MOD 312>; dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 312>; status = "disabled"; }; @@ -564,12 +593,13 @@ compatible = "renesas,sdhi-r8a7793"; reg = <0 0xee160000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7793_CLK_SDHI2>; + clocks = <&cpg CPG_MOD 311>; dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 311>; status = "disabled"; }; @@ -577,11 +607,12 @@ compatible = "renesas,mmcif-r8a7793", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = ; - clocks = <&mstp3_clks R8A7793_CLK_MMCIF0>; + clocks = <&cpg CPG_MOD 315>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 315>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -592,12 +623,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>; + clocks = <&cpg CPG_MOD 204>; clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 204>; status = "disabled"; }; @@ -606,12 +638,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>; + clocks = <&cpg CPG_MOD 203>; clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>, <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 203>; status = "disabled"; }; @@ -620,12 +653,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>; + clocks = <&cpg CPG_MOD 202>; clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>, <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 202>; status = "disabled"; }; @@ -634,12 +668,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>; + clocks = <&cpg CPG_MOD 1106>; clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, <&dmac1 0x1b>, <&dmac1 0x1c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 1106>; status = "disabled"; }; @@ -648,12 +683,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>; + clocks = <&cpg CPG_MOD 1107>; clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>, <&dmac1 0x1f>, <&dmac1 0x20>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 1107>; status = "disabled"; }; @@ -662,12 +698,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>; + clocks = <&cpg CPG_MOD 1108>; clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>, <&dmac1 0x23>, <&dmac1 0x24>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 1108>; status = "disabled"; }; @@ -676,12 +713,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>; + clocks = <&cpg CPG_MOD 206>; clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 206>; status = "disabled"; }; @@ -690,12 +728,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>; + clocks = <&cpg CPG_MOD 207>; clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>, <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 207>; status = "disabled"; }; @@ -704,12 +743,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>; + clocks = <&cpg CPG_MOD 216>; clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 216>; status = "disabled"; }; @@ -718,13 +758,14 @@ "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 721>; status = "disabled"; }; @@ -733,13 +774,14 @@ "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 720>; status = "disabled"; }; @@ -748,13 +790,14 @@ "renesas,scif"; reg = <0 0xe6e58000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 719>; status = "disabled"; }; @@ -763,13 +806,14 @@ "renesas,scif"; reg = <0 0xe6ea8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>, + clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 718>; status = "disabled"; }; @@ -778,13 +822,14 @@ "renesas,scif"; reg = <0 0xe6ee0000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>, + clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 715>; status = "disabled"; }; @@ -793,13 +838,14 @@ "renesas,scif"; reg = <0 0xe6ee8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>, + clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 714>; status = "disabled"; }; @@ -808,13 +854,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 717>; status = "disabled"; }; @@ -823,13 +870,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 716>; status = "disabled"; }; @@ -838,13 +886,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, <&dmac1 0x3b>, <&dmac1 0x3c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 713>; status = "disabled"; }; @@ -870,8 +919,9 @@ compatible = "renesas,ether-r8a7793"; reg = <0 0xee700000 0 0x400>; interrupts = ; - clocks = <&mstp8_clks R8A7793_CLK_ETHER>; + clocks = <&cpg CPG_MOD 813>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 813>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -882,8 +932,9 @@ compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7793_CLK_VIN0>; + clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 811>; status = "disabled"; }; @@ -891,8 +942,9 @@ compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7793_CLK_VIN1>; + clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 810>; status = "disabled"; }; @@ -900,8 +952,9 @@ compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef2000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7793_CLK_VIN2>; + clocks = <&cpg CPG_MOD 809>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 809>; status = "disabled"; }; @@ -909,11 +962,12 @@ compatible = "renesas,qspi-r8a7793", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>; + clocks = <&cpg CPG_MOD 917>; dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 917>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -927,9 +981,9 @@ reg-names = "du", "lvds.0"; interrupts = , ; - clocks = <&mstp7_clks R8A7793_CLK_DU0>, - <&mstp7_clks R8A7793_CLK_DU1>, - <&mstp7_clks R8A7793_CLK_LVDS0>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 726>; clock-names = "du.0", "du.1", "lvds.0"; status = "disabled"; @@ -954,10 +1008,11 @@ compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_RCAN0>, - <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7793_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -965,376 +1020,75 @@ compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_RCAN1>, - <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7793_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; - clocks { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; - - /* - * The external audio clocks are configured as 0 Hz fixed frequency clocks by - * default. Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_b: audio_clk_b { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - /* Special CPG clocks */ - cpg_clocks: cpg_clocks@e6150000 { - compatible = "renesas,r8a7793-cpg-clocks", - "renesas,rcar-gen2-cpg-clocks"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk &usb_extal_clk>; - #clock-cells = <1>; - clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "z", - "rcan", "adsp"; - #power-domain-cells = <0>; - }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; - /* Variable factor clocks */ - sd2_clk: sd2@e6150078 { - compatible = "renesas,r8a7793-div6-clock", - "renesas,cpg-div6-clock"; - reg = <0 0xe6150078 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - sd3_clk: sd3@e615026c { - compatible = "renesas,r8a7793-div6-clock", - "renesas,cpg-div6-clock"; - reg = <0 0xe615026c 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - mmc0_clk: mmc0@e6150240 { - compatible = "renesas,r8a7793-div6-clock", - "renesas,cpg-div6-clock"; - reg = <0 0xe6150240 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - zg_clk: zg { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <5>; - clock-mult = <1>; - }; - zx_clk: zx { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zs_clk: zs { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <6>; - clock-mult = <1>; - }; - hp_clk: hp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - p_clk: p { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <24>; - clock-mult = <1>; - }; - m2_clk: m2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - rclk_clk: rclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(48 * 1024)>; - clock-mult = <1>; - }; - mp_clk: mp { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <15>; - clock-mult = <1>; - }; - cp_clk: cp { - compatible = "fixed-factor-clock"; - clocks = <&extal_clk>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Gate clocks */ - mstp1_clks: mstp1_clks@e6150134 { - compatible = "renesas,r8a7793-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, - <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, - <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, - <&zs_clk>, <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_VCP0 R8A7793_CLK_VPC0 - R8A7793_CLK_SSP1 R8A7793_CLK_TMU1 - R8A7793_CLK_3DG R8A7793_CLK_2DDMAC - R8A7793_CLK_FDP1_1 R8A7793_CLK_FDP1_0 - R8A7793_CLK_TMU3 R8A7793_CLK_TMU2 - R8A7793_CLK_CMT0 R8A7793_CLK_TMU0 - R8A7793_CLK_VSP1_DU1 R8A7793_CLK_VSP1_DU0 - R8A7793_CLK_VSP1_S - >; - clock-output-names = - "vcp0", "vpc0", "ssp_dev", "tmu1", - "pvrsrvkm", "tddmac", "fdp1", "fdp0", - "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", - "vsp1-du0", "vsps"; - }; - mstp2_clks: mstp2_clks@e6150138 { - compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_SCIFA2 R8A7793_CLK_SCIFA1 R8A7793_CLK_SCIFA0 - R8A7793_CLK_SCIFB0 R8A7793_CLK_SCIFB1 R8A7793_CLK_SCIFB2 - R8A7793_CLK_SYS_DMAC1 R8A7793_CLK_SYS_DMAC0 - >; - clock-output-names = - "scifa2", "scifa1", "scifa0", "scifb0", - "scifb1", "scifb2", "sys-dmac1", "sys-dmac0"; - }; - mstp3_clks: mstp3_clks@e615013c { - compatible = "renesas,r8a7793-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>, - <&cpg_clocks R8A7793_CLK_SD0>, <&mmc0_clk>, - <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, - <&rclk_clk>, <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_TPU0 R8A7793_CLK_SDHI2 - R8A7793_CLK_SDHI1 R8A7793_CLK_SDHI0 - R8A7793_CLK_MMCIF0 R8A7793_CLK_IIC0 - R8A7793_CLK_PCIEC R8A7793_CLK_IIC1 - R8A7793_CLK_SSUSB R8A7793_CLK_CMT1 - R8A7793_CLK_USBDMAC0 R8A7793_CLK_USBDMAC1 - >; - clock-output-names = - "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", - "i2c7", "pciec", "i2c8", "ssusb", "cmt1", - "usbdmac0", "usbdmac1"; - }; - mstp4_clks: mstp4_clks@e6150140 { - compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_IRQC R8A7793_CLK_INTC_SYS - >; - clock-output-names = "irqc", "intc-sys"; - }; - mstp5_clks: mstp5_clks@e6150144 { - compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "audmac0", "audmac1", "thermal"; - }; - mstp7_clks: mstp7_clks@e615014c { - compatible = "renesas,r8a7793-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&p_clk>, - <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, - <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>, - <&zx_clk>, <&zx_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_EHCI R8A7793_CLK_HSUSB - R8A7793_CLK_HSCIF2 R8A7793_CLK_SCIF5 - R8A7793_CLK_SCIF4 R8A7793_CLK_HSCIF1 - R8A7793_CLK_HSCIF0 R8A7793_CLK_SCIF3 - R8A7793_CLK_SCIF2 R8A7793_CLK_SCIF1 - R8A7793_CLK_SCIF0 R8A7793_CLK_DU1 - R8A7793_CLK_DU0 R8A7793_CLK_LVDS0 - >; - clock-output-names = - "ehci", "hsusb", "hscif2", "scif5", "scif4", - "hscif1", "hscif0", "scif3", "scif2", - "scif1", "scif0", "du1", "du0", "lvds0"; - }; - mstp8_clks: mstp8_clks@e6150990 { - compatible = "renesas,r8a7793-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zx_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, - <&p_clk>, <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_IPMMU_SGX R8A7793_CLK_VIN2 - R8A7793_CLK_VIN1 R8A7793_CLK_VIN0 - R8A7793_CLK_ETHER R8A7793_CLK_SATA1 - R8A7793_CLK_SATA0 - >; - clock-output-names = - "ipmmu_sgx", "vin2", "vin1", "vin0", "ether", - "sata1", "sata0"; - }; - mstp9_clks: mstp9_clks@e6150994 { - compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&p_clk>, <&p_clk>, - <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>, - <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, - <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6 - R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4 - R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2 - R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0 - R8A7793_CLK_QSPI_MOD R8A7793_CLK_RCAN1 - R8A7793_CLK_RCAN0 R8A7793_CLK_I2C5 - R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4 - R8A7793_CLK_I2C3 R8A7793_CLK_I2C2 - R8A7793_CLK_I2C1 R8A7793_CLK_I2C0 - >; - clock-output-names = - "gpio7", "gpio6", "gpio5", "gpio4", - "gpio3", "gpio2", "gpio1", "gpio0", - "rcan1", "rcan0", "qspi_mod", "i2c5", - "i2c6", "i2c4", "i2c3", "i2c2", "i2c1", - "i2c0"; - }; - mstp10_clks: mstp10_clks@e6150998 { - compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; - clocks = <&p_clk>, - <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, - <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, - <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, - <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, - <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, - <&p_clk>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>; - - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_SSI_ALL - R8A7793_CLK_SSI9 R8A7793_CLK_SSI8 R8A7793_CLK_SSI7 R8A7793_CLK_SSI6 R8A7793_CLK_SSI5 - R8A7793_CLK_SSI4 R8A7793_CLK_SSI3 R8A7793_CLK_SSI2 R8A7793_CLK_SSI1 R8A7793_CLK_SSI0 - R8A7793_CLK_SCU_ALL - R8A7793_CLK_SCU_DVC1 R8A7793_CLK_SCU_DVC0 - R8A7793_CLK_SCU_CTU1_MIX1 R8A7793_CLK_SCU_CTU0_MIX0 - R8A7793_CLK_SCU_SRC9 R8A7793_CLK_SCU_SRC8 R8A7793_CLK_SCU_SRC7 R8A7793_CLK_SCU_SRC6 R8A7793_CLK_SCU_SRC5 - R8A7793_CLK_SCU_SRC4 R8A7793_CLK_SCU_SRC3 R8A7793_CLK_SCU_SRC2 R8A7793_CLK_SCU_SRC1 R8A7793_CLK_SCU_SRC0 - >; - clock-output-names = - "ssi-all", - "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", - "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", - "scu-all", - "scu-dvc1", "scu-dvc0", - "scu-ctu1-mix1", "scu-ctu0-mix0", - "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", - "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; - }; - mstp11_clks: mstp11_clks@e615099c { - compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_SCIFA3 R8A7793_CLK_SCIFA4 R8A7793_CLK_SCIFA5 - >; - clock-output-names = "scifa3", "scifa4", "scifa5"; - }; + /* Special CPG clocks */ + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7793-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; }; rst: reset-controller@e6160000 { @@ -1428,19 +1182,20 @@ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - clocks = <&mstp10_clks R8A7793_CLK_SSI_ALL>, - <&mstp10_clks R8A7793_CLK_SSI9>, <&mstp10_clks R8A7793_CLK_SSI8>, - <&mstp10_clks R8A7793_CLK_SSI7>, <&mstp10_clks R8A7793_CLK_SSI6>, - <&mstp10_clks R8A7793_CLK_SSI5>, <&mstp10_clks R8A7793_CLK_SSI4>, - <&mstp10_clks R8A7793_CLK_SSI3>, <&mstp10_clks R8A7793_CLK_SSI2>, - <&mstp10_clks R8A7793_CLK_SSI1>, <&mstp10_clks R8A7793_CLK_SSI0>, - <&mstp10_clks R8A7793_CLK_SCU_SRC9>, <&mstp10_clks R8A7793_CLK_SCU_SRC8>, - <&mstp10_clks R8A7793_CLK_SCU_SRC7>, <&mstp10_clks R8A7793_CLK_SCU_SRC6>, - <&mstp10_clks R8A7793_CLK_SCU_SRC5>, <&mstp10_clks R8A7793_CLK_SCU_SRC4>, - <&mstp10_clks R8A7793_CLK_SCU_SRC3>, <&mstp10_clks R8A7793_CLK_SCU_SRC2>, - <&mstp10_clks R8A7793_CLK_SCU_SRC1>, <&mstp10_clks R8A7793_CLK_SCU_SRC0>, - <&mstp10_clks R8A7793_CLK_SCU_DVC0>, <&mstp10_clks R8A7793_CLK_SCU_DVC1>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A7793_CLK_M2>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", @@ -1449,6 +1204,13 @@ "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index f1eea13cdf44371d84f63695aaf5ff812fc9a45c..bd98790d964e13a7afbf50c67ef9ce6a8e3490f6 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -167,8 +167,7 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&mstp7_clks R8A7794_CLK_DU0>, - <&mstp7_clks R8A7794_CLK_DU1>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x13_clk>, <&x2_clk>; clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; @@ -305,7 +304,7 @@ vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; sd-uhs-sdr50; sd-uhs-sdr104; status = "okay"; @@ -319,7 +318,7 @@ vmmc-supply = <&vcc_sdhi1>; vqmmc-supply = <&vccq_sdhi1>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; sd-uhs-sdr50; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 4cb5278d104dfcb3324c923cdd4346908f8d7586..edfad0e5ac53a0c124c07b66018cbd0ba8a4ea8a 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -423,8 +423,7 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&mstp7_clks R8A7794_CLK_DU0>, - <&mstp7_clks R8A7794_CLK_DU1>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x2_clk>, <&x3_clk>; clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 26535414203a0b1e43bab73a12ec16238c8b3b1b..5643976c13569541b079dd5f9c9a4545dcf2ffc3 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -9,7 +9,7 @@ * kind, whether express or implied. */ -#include +#include #include #include #include @@ -43,7 +43,7 @@ compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; - clocks = <&z2_clk>; + clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>; power-domains = <&sysc R8A7794_PD_CA7_CPU0>; next-level-cache = <&L2_CA7>; }; @@ -53,6 +53,7 @@ compatible = "arm,cortex-a7"; reg = <1>; clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>; power-domains = <&sysc R8A7794_PD_CA7_CPU1>; next-level-cache = <&L2_CA7>; }; @@ -75,13 +76,14 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = ; - clocks = <&mstp4_clks R8A7794_CLK_INTC_SYS>; + clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -89,12 +91,13 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO0>; + clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -102,12 +105,13 @@ gpio-ranges = <&pfc 0 32 26>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO1>; + clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -115,12 +119,13 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO2>; + clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -128,12 +133,13 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO3>; + clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -141,12 +147,13 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO4>; + clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -154,12 +161,13 @@ gpio-ranges = <&pfc 0 160 28>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO5>; + clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055400 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -167,8 +175,9 @@ gpio-ranges = <&pfc 0 192 26>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO6>; + clocks = <&cpg CPG_MOD 905>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; cmt0: timer@ffca0000 { @@ -176,9 +185,10 @@ reg = <0 0xffca0000 0 0x1004>; interrupts = , ; - clocks = <&mstp1_clks R8A7794_CLK_CMT0>; + clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 124>; renesas,channels-mask = <0x60>; @@ -196,9 +206,10 @@ , , ; - clocks = <&mstp3_clks R8A7794_CLK_CMT1>; + clocks = <&cpg CPG_MOD 329>; clock-names = "fck"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 329>; renesas,channels-mask = <0xff>; @@ -228,8 +239,9 @@ , , ; - clocks = <&mstp4_clks R8A7794_CLK_IRQC>; + clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; pfc: pin-controller@e6060000 { @@ -261,9 +273,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>; + clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; }; @@ -292,9 +305,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>; + clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; }; @@ -320,9 +334,10 @@ "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7794_CLK_AUDIO_DMAC0>; + clocks = <&cpg CPG_MOD 502>; clock-names = "fck"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <13>; }; @@ -332,12 +347,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; + clocks = <&cpg CPG_MOD 204>; clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 204>; status = "disabled"; }; @@ -346,12 +362,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; + clocks = <&cpg CPG_MOD 203>; clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>, <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 203>; status = "disabled"; }; @@ -360,12 +377,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; + clocks = <&cpg CPG_MOD 202>; clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>, <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 202>; status = "disabled"; }; @@ -374,12 +392,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; + clocks = <&cpg CPG_MOD 1106>; clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, <&dmac1 0x1b>, <&dmac1 0x1c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 1106>; status = "disabled"; }; @@ -388,12 +407,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; + clocks = <&cpg CPG_MOD 1107>; clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>, <&dmac1 0x1f>, <&dmac1 0x20>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 1107>; status = "disabled"; }; @@ -402,12 +422,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; + clocks = <&cpg CPG_MOD 1108>; clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>, <&dmac1 0x23>, <&dmac1 0x24>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 1108>; status = "disabled"; }; @@ -416,12 +437,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; + clocks = <&cpg CPG_MOD 206>; clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 206>; status = "disabled"; }; @@ -430,12 +452,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; + clocks = <&cpg CPG_MOD 207>; clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>, <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 207>; status = "disabled"; }; @@ -444,12 +467,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; + clocks = <&cpg CPG_MOD 216>; clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 216>; status = "disabled"; }; @@ -458,13 +482,14 @@ "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 721>; status = "disabled"; }; @@ -473,13 +498,14 @@ "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 720>; status = "disabled"; }; @@ -488,13 +514,14 @@ "renesas,scif"; reg = <0 0xe6e58000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 719>; status = "disabled"; }; @@ -503,13 +530,14 @@ "renesas,scif"; reg = <0 0xe6ea8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>, + clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 718>; status = "disabled"; }; @@ -518,13 +546,14 @@ "renesas,scif"; reg = <0 0xe6ee0000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>, + clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 715>; status = "disabled"; }; @@ -533,13 +562,14 @@ "renesas,scif"; reg = <0 0xe6ee8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>, + clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 714>; status = "disabled"; }; @@ -548,13 +578,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 717>; status = "disabled"; }; @@ -563,13 +594,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 716>; status = "disabled"; }; @@ -578,13 +610,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, <&dmac1 0x3b>, <&dmac1 0x3c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 713>; status = "disabled"; }; @@ -610,8 +643,9 @@ compatible = "renesas,ether-r8a7794"; reg = <0 0xee700000 0 0x400>; interrupts = ; - clocks = <&mstp8_clks R8A7794_CLK_ETHER>; + clocks = <&cpg CPG_MOD 813>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 813>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -623,8 +657,9 @@ "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = ; - clocks = <&mstp8_clks R8A7794_CLK_ETHERAVB>; + clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 812>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -635,8 +670,9 @@ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_I2C0>; + clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 931>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -647,8 +683,9 @@ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_I2C1>; + clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 930>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -659,8 +696,9 @@ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_I2C2>; + clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 929>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -671,8 +709,9 @@ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_I2C3>; + clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 928>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -683,8 +722,9 @@ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_I2C4>; + clocks = <&cpg CPG_MOD 927>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 927>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -695,8 +735,9 @@ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_I2C5>; + clocks = <&cpg CPG_MOD 925>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 925>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -708,11 +749,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7794_CLK_IIC0>; + clocks = <&cpg CPG_MOD 318>; dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 318>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -723,11 +765,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7794_CLK_IIC1>; + clocks = <&cpg CPG_MOD 323>; dmas = <&dmac0 0x65>, <&dmac0 0x66>, <&dmac1 0x65>, <&dmac1 0x66>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 323>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -737,11 +780,12 @@ compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = ; - clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>; + clocks = <&cpg CPG_MOD 315>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 315>; reg-io-width = <4>; status = "disabled"; }; @@ -750,12 +794,13 @@ compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee100000 0 0x328>; interrupts = ; - clocks = <&mstp3_clks R8A7794_CLK_SDHI0>; + clocks = <&cpg CPG_MOD 314>; dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -763,12 +808,13 @@ compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee140000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7794_CLK_SDHI1>; + clocks = <&cpg CPG_MOD 312>; dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 312>; status = "disabled"; }; @@ -776,12 +822,13 @@ compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee160000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7794_CLK_SDHI2>; + clocks = <&cpg CPG_MOD 311>; dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 311>; status = "disabled"; }; @@ -789,11 +836,12 @@ compatible = "renesas,qspi-r8a7794", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>; + clocks = <&cpg CPG_MOD 917>; dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 917>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -804,8 +852,9 @@ compatible = "renesas,vin-r8a7794", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7794_CLK_VIN0>; + clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 811>; status = "disabled"; }; @@ -813,8 +862,9 @@ compatible = "renesas,vin-r8a7794", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7794_CLK_VIN1>; + clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 810>; status = "disabled"; }; @@ -824,8 +874,9 @@ reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; bus-range = <0 0>; @@ -857,8 +908,9 @@ reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; bus-range = <1 1>; @@ -888,8 +940,9 @@ compatible = "renesas,usbhs-r8a7794", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; + clocks = <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 704>; renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb"; @@ -902,9 +955,10 @@ reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; - clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; + clocks = <&cpg CPG_MOD 704>; clock-names = "usbhs"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 704>; status = "disabled"; usb0: usb-channel@0 { @@ -917,20 +971,22 @@ }; }; - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7794_CLK_VSP1_S>; + clocks = <&cpg CPG_MOD 131>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 131>; }; - vsp1@fe930000 { + vsp@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7794_CLK_VSP1_DU0>; + clocks = <&cpg CPG_MOD 128>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 128>; }; du: display@feb00000 { @@ -939,8 +995,7 @@ reg-names = "du"; interrupts = , ; - clocks = <&mstp7_clks R8A7794_CLK_DU0>, - <&mstp7_clks R8A7794_CLK_DU1>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; status = "disabled"; @@ -965,10 +1020,11 @@ compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_RCAN0>, - <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7794_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -976,434 +1032,74 @@ compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_RCAN1>, - <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7794_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; - clocks { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overriden by the board. */ - clock-frequency = <0>; - }; - - /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; - - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* - * The external audio clocks are configured as 0 Hz fixed - * frequency clocks by default. Boards that provide audio - * clocks should override them. - */ - audio_clka: audio_clka { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clkb: audio_clkb { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clkc: audio_clkc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; - /* Special CPG clocks */ - cpg_clocks: cpg_clocks@e6150000 { - compatible = "renesas,r8a7794-cpg-clocks", - "renesas,rcar-gen2-cpg-clocks"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk &usb_extal_clk>; - #clock-cells = <1>; - clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "rcan"; - #power-domain-cells = <0>; - }; - /* Variable factor clocks */ - sd2_clk: sd2@e6150078 { - compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150078 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - sd3_clk: sd3@e615026c { - compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615026c 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - mmc0_clk: mmc0@e6150240 { - compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150240 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - z2_clk: z2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL0>; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - }; - zg_clk: zg { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <6>; - clock-mult = <1>; - }; - zx_clk: zx { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zs_clk: zs { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <6>; - clock-mult = <1>; - }; - hp_clk: hp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - i_clk: i { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - b_clk: b { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - p_clk: p { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <24>; - clock-mult = <1>; - }; - cl_clk: cl { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <48>; - clock-mult = <1>; - }; - m2_clk: m2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - rclk_clk: rclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(48 * 1024)>; - clock-mult = <1>; - }; - oscclk_clk: oscclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(12 * 1024)>; - clock-mult = <1>; - }; - zb3_clk: zb3 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - }; - zb3d2_clk: zb3d2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - ddr_clk: ddr { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - mp_clk: mp { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <15>; - clock-mult = <1>; - }; - cp_clk: cp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <48>; - clock-mult = <1>; - }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - acp_clk: acp { - compatible = "fixed-factor-clock"; - clocks = <&extal_clk>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; + /* + * The external audio clocks are configured as 0 Hz fixed + * frequency clocks by default. Boards that provide audio + * clocks should override them. + */ + audio_clka: audio_clka { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clkb: audio_clkb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clkc: audio_clkc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - /* Gate clocks */ - mstp0_clks: mstp0_clks@e6150130 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; - clocks = <&mp_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "msiof0"; - }; - mstp1_clks: mstp1_clks@e6150134 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>, - <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, - <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_VCP0 R8A7794_CLK_VPC0 R8A7794_CLK_TMU1 - R8A7794_CLK_3DG R8A7794_CLK_2DDMAC R8A7794_CLK_FDP1_0 - R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 R8A7794_CLK_CMT0 - R8A7794_CLK_TMU0 R8A7794_CLK_VSP1_DU0 R8A7794_CLK_VSP1_S - >; - clock-output-names = - "vcp0", "vpc0", "tmu1", "3dg", "2ddmac", "fdp1-0", - "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du0", "vsps"; - }; - mstp2_clks: mstp2_clks@e6150138 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_SCIFA2 R8A7794_CLK_SCIFA1 R8A7794_CLK_SCIFA0 - R8A7794_CLK_MSIOF2 R8A7794_CLK_SCIFB0 R8A7794_CLK_SCIFB1 - R8A7794_CLK_MSIOF1 R8A7794_CLK_SCIFB2 - R8A7794_CLK_SYS_DMAC1 R8A7794_CLK_SYS_DMAC0 - >; - clock-output-names = - "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "scifb2", - "sys-dmac1", "sys-dmac0"; - }; - mstp3_clks: mstp3_clks@e615013c { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>, - <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>, - <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_SDHI2 R8A7794_CLK_SDHI1 R8A7794_CLK_SDHI0 - R8A7794_CLK_MMCIF0 R8A7794_CLK_IIC0 - R8A7794_CLK_IIC1 R8A7794_CLK_CMT1 - R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1 - >; - clock-output-names = - "sdhi2", "sdhi1", "sdhi0", - "mmcif0", "i2c6", "i2c7", - "cmt1", "usbdmac0", "usbdmac1"; - }; - mstp4_clks: mstp4_clks@e6150140 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "irqc", "intc-sys"; - }; - mstp5_clks: mstp5_clks@e6150144 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&hp_clk>, <&p_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "audmac0", "pwm"; - }; - mstp7_clks: mstp7_clks@e615014c { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&hp_clk>, - <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, - <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&zx_clk>, <&zx_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_EHCI R8A7794_CLK_HSUSB - R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5 - R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0 - R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1 - R8A7794_CLK_SCIF0 - R8A7794_CLK_DU1 R8A7794_CLK_DU0 - >; - clock-output-names = - "ehci", "hsusb", - "hscif2", "scif5", "scif4", "hscif1", "hscif0", - "scif3", "scif2", "scif1", "scif0", - "du1", "du0"; - }; - mstp8_clks: mstp8_clks@e6150990 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zg_clk>, <&zg_clk>, <&hp_clk>, <&p_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 - R8A7794_CLK_ETHERAVB R8A7794_CLK_ETHER - >; - clock-output-names = - "vin1", "vin0", "etheravb", "ether"; - }; - mstp9_clks: mstp9_clks@e6150994 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, <&p_clk>, - <&p_clk>, <&cpg_clocks R8A7794_CLK_QSPI>, - <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, - <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = - "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", - "gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod", - "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; - }; - mstp10_clks: mstp10_clks@e6150998 { - compatible = "renesas,r8a7794-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; - clocks = <&p_clk>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&p_clk>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "ssi-all", "ssi9", "ssi8", "ssi7", - "ssi6", "ssi5", "ssi4", "ssi3", - "ssi2", "ssi1", "ssi0", - "scu-all", "scu-dvc1", "scu-dvc0", - "scu-ctu1-mix1", "scu-ctu0-mix0", - "scu-src6", "scu-src5", "scu-src4", - "scu-src3", "scu-src2", "scu-src1"; - }; - mstp11_clks: mstp11_clks@e615099c { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5 - >; - clock-output-names = "scifa3", "scifa4", "scifa5"; - }; + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7794-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; }; rst: reset-controller@e6160000 { @@ -1490,31 +1186,20 @@ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri */ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - clocks = <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI9>, - <&mstp10_clks R8A7794_CLK_SSI8>, - <&mstp10_clks R8A7794_CLK_SSI7>, - <&mstp10_clks R8A7794_CLK_SSI6>, - <&mstp10_clks R8A7794_CLK_SSI5>, - <&mstp10_clks R8A7794_CLK_SSI4>, - <&mstp10_clks R8A7794_CLK_SSI3>, - <&mstp10_clks R8A7794_CLK_SSI2>, - <&mstp10_clks R8A7794_CLK_SSI1>, - <&mstp10_clks R8A7794_CLK_SSI0>, - <&mstp10_clks R8A7794_CLK_SCU_SRC6>, - <&mstp10_clks R8A7794_CLK_SCU_SRC5>, - <&mstp10_clks R8A7794_CLK_SCU_SRC4>, - <&mstp10_clks R8A7794_CLK_SCU_SRC3>, - <&mstp10_clks R8A7794_CLK_SCU_SRC2>, - <&mstp10_clks R8A7794_CLK_SCU_SRC1>, - <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>, - <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>, - <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>, - <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>, - <&mstp10_clks R8A7794_CLK_SCU_DVC0>, - <&mstp10_clks R8A7794_CLK_SCU_DVC1>, + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, + <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>, + <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clka>, <&audio_clkb>, <&audio_clkc>, - <&m2_clk>; + <&cpg CPG_CORE R8A7794_CLK_M2>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", @@ -1525,6 +1210,13 @@ "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; status = "disabled"; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index fdb1570bc7d3137fcfed7acf2fb970ca4ff1a75a..e2a0f576946f0884bb091d8a2ff6bc71e7b47949 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -135,6 +135,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 4916c65e0ace7ca0b9ec68cddaca34b55c39d932..3b704cfed69ac1f7b39343925fb2037c9e78e10b 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -152,6 +152,25 @@ }; }; + gpu: gpu@10090000 { + compatible = "rockchip,rk3036-mali", "arm,mali-400"; + reg = <0x10090000 0x10000>; + interrupts = , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0"; + assigned-clocks = <&cru SCLK_GPU>; + assigned-clock-rates = <100000000>; + clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>; + clock-names = "core", "bus"; + resets = <&cru SRST_GPU>; + status = "disabled"; + }; + vop: vop@10118000 { compatible = "rockchip,rk3036-vop"; reg = <0x10118000 0x19c>; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 400cbf9609e3707b7792139bba326c947df81fe8..cdf301f5778b129f0d2007c8cfa5cd0f13b93d61 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -196,7 +196,7 @@ clock-frequency = <400000>; status = "okay"; - ak8963: ak8963@0d { + ak8963: ak8963@d { compatible = "asahi-kasei,ak8975"; reg = <0x0d>; interrupt-parent = <&gpio4>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index f50481fd8e5cdc5de9e05a035fb75d2b2bd8bbaf..06523caca27d6d09058fbe3b6983266fbae3858c 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -610,6 +610,30 @@ }; }; +&gpu { + compatible = "rockchip,rk3066-mali", "arm,mali-400"; + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_xfer>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 53d6fc2fdbce89fb2118c30e2115c05bc29eebcd..00e05a6662acd5bb19c42540fd0d22c857fdf4af 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -176,6 +176,10 @@ cpu0-supply = <&vdd_arm>; }; +&gpu { + status = "okay"; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 1399bc04ea77fe17fd10472c0ba37ba7d80c8a1a..aa10caae51c3021f4cef19ade6bd3ca517e3c24f 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -553,6 +553,30 @@ interrupts = ; }; +&gpu { + compatible = "rockchip,rk3188-mali", "arm,mali-400"; + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3"; +}; + &i2c0 { compatible = "rockchip,rk3188-i2c"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 06814421eed2ef9c41fd5db803bc60f91ee85bed..780ec3a99b21f857b414d4d47b8e773cd28c7788 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -558,6 +558,27 @@ status = "disabled"; }; + gpu: gpu@20000000 { + compatible = "rockchip,rk3228-mali", "arm,mali-400"; + reg = <0x20000000 0x10000>; + interrupts = , + , + , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1"; + clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; + clock-names = "core", "bus"; + resets = <&cru SRST_GPU_A>; + status = "disabled"; + }; + vpu_mmu: iommu@20020800 { compatible = "rockchip,iommu"; reg = <0x20020800 0x100>; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index 5f05815f47e09278bdc9eb7870d25ab0c504e549..5f1e336dbaac7a85c300c1a5f395a7d4cd127953 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -184,6 +184,7 @@ regulator-name = "vdd10_lcd"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-always-on; }; vcca_18: REG7 { @@ -223,6 +224,7 @@ regulator-name = "vcc18_lcd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 7da0947ababbc4a1cda11e6f5b4190ee9f803a88..eab176e3dfc3011149ecefc91745a4ee3a20e89f 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -226,6 +226,13 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c5>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec_c0>; + status = "okay"; +}; + &i2c0 { hym8563: hym8563@51 { compatible = "haoyu,hym8563"; @@ -255,6 +262,10 @@ }; }; +&i2c5 { + status = "okay"; +}; + &i2s { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index f084e0c8dcb350726949d698cd8021c0168d8a9e..c06d0f4ceb8153811752a2d31e0e85779288ec5d 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -384,7 +384,7 @@ status = "okay"; clock-frequency = <400000>; - ak8963: ak8963@0d { + ak8963: ak8963@d { compatible = "asahi-kasei,ak8975"; reg = <0x0d>; interrupt-parent = <&gpio8>; diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts new file mode 100644 index 0000000000000000000000000000000000000000..9842a006e8238b352672968f21b155f543130f69 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -0,0 +1,498 @@ +/* + * Copyright (C) 2017 Jagan Teki + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288.dtsi" + +/ { + model = "Amarula Vyasa-RK3288"; + compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; + + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x0 0x0 0x0 0x80000000>; + device_type = "memory"; + }; + + dc12_vbat: dc12-vbat { + compatible = "regulator-fixed"; + regulator-name = "dc12_vbat"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vboot_3v3: vboot-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vboot_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + vboot_5v: vboot-5v { + compatible = "regulator-fixed"; + regulator-name = "vboot_sv"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + v3g_3v3: v3g-3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3g_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + vsus_5v: vsus-5v { + compatible = "regulator-fixed"; + regulator-name = "vsus_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vusb1_5v: vusb1-5v { + compatible = "regulator-fixed"; + regulator-name = "vusb1_5v"; + enable-active-high; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */ + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsus_5v>; + }; + + vusb2_5v: vusb2-5v { + compatible = "regulator-fixed"; + regulator-name = "vusb2_5v"; + enable-active-high; + gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */ + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pwr_en>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsus_5v>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = ; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &global_pwroff>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_tp: LDO_REG1 { + regulator-name = "vcc_tp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_codec: LDO_REG2 { + regulator-name = "vcc_codec"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_gps: LDO_REG4 { + regulator-name = "vcc_gps"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc10_lcd: LDO_REG6 { + regulator-name = "vcc10_lcd"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_18: LDO_REG7 { + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_lcd: LDO_REG8 { + regulator-name = "vcc18_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: SWITCH_REG1 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_lan: SWITCH_REG2 { + regulator-name = "vcc_lan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + audio-supply = <&vcc_18>; + bb-supply = <&vcc_io>; + dvp-supply = <&vcc_io>; + flash0-suuply = <&vcc_18>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830 = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1 { + pinctrl-names = "default"; + pinctrl-0 = <&phy_pwr_en>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + gmac { + phy_int: phy-int { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_pmeb: phy-pmeb { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rst: phy-rst { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = ; + }; + }; + + usb_host { + phy_pwr_en: phy-pwr-en { + rockchip,pins = ; + }; + + usb2_pwr_en: usb2-pwr-en { + rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_otg { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = ; + + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 356ed1e624525224c8e797da0990f83a75823008..cd24894ee5c6b14deab21c543bad7c62ec34c93d 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -972,6 +972,17 @@ status = "disabled"; }; + rga: rga@ff920000 { + compatible = "rockchip,rk3288-rga"; + reg = <0x0 0xff920000 0x0 0x180>; + interrupts = ; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>; + clock-names = "aclk", "hclk", "sclk"; + power-domains = <&power RK3288_PD_VIO>; + resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>; + reset-names = "core", "axi", "ahb"; + }; + vopb: vop@ff930000 { compatible = "rockchip,rk3288-vop"; reg = <0x0 0xff930000 0x0 0x19c>; @@ -1002,6 +1013,11 @@ reg = <2>; remote-endpoint = <&mipi_in_vopb>; }; + + vopb_out_lvds: endpoint@3 { + reg = <3>; + remote-endpoint = <&lvds_in_vopb>; + }; }; }; @@ -1045,6 +1061,11 @@ reg = <2>; remote-endpoint = <&mipi_in_vopl>; }; + + vopl_out_lvds: endpoint@3 { + reg = <3>; + remote-endpoint = <&lvds_in_vopl>; + }; }; }; @@ -1086,6 +1107,39 @@ }; }; + lvds: lvds@ff96c000 { + compatible = "rockchip,rk3288-lvds"; + reg = <0x0 0xff96c000 0x0 0x4000>; + clocks = <&cru PCLK_LVDS_PHY>; + clock-names = "pclk_lvds"; + pinctrl-names = "lcdc"; + pinctrl-0 = <&lcdc_ctl>; + power-domains = <&power RK3288_PD_VIO>; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + lvds_in: port@0 { + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + lvds_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_lvds>; + }; + lvds_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_lvds>; + }; + }; + }; + }; + edp: dp@ff970000 { compatible = "rockchip,rk3288-dp"; reg = <0x0 0xff970000 0x0 0x4000>; @@ -1124,8 +1178,8 @@ reg-io-width = <4>; rockchip,grf = <&grf>; interrupts = ; - clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; - clock-names = "iahb", "isfr"; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>; + clock-names = "iahb", "isfr", "cec"; power-domains = <&power RK3288_PD_VIO>; status = "disabled"; @@ -1427,6 +1481,14 @@ }; hdmi { + hdmi_cec_c0: hdmi-cec-c0 { + rockchip,pins = <7 RK_PC0 RK_FUNC_2 &pcfg_pull_none>; + }; + + hdmi_cec_c7: hdmi-cec-c7 { + rockchip,pins = <7 RK_PC7 RK_FUNC_4 &pcfg_pull_none>; + }; + hdmi_ddc: hdmi-ddc { rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>, <7 20 RK_FUNC_2 &pcfg_pull_none>; @@ -1527,6 +1589,15 @@ }; }; + lcdc { + lcdc_ctl: lcdc-ctl { + rockchip,pins = <1 24 RK_FUNC_1 &pcfg_pull_none>, + <1 25 RK_FUNC_1 &pcfg_pull_none>, + <1 26 RK_FUNC_1 &pcfg_pull_none>, + <1 27 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + sdmmc { sdmmc_clk: sdmmc-clk { rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 4aa6f60d6a22eddf372c34cc18769347e65fa48c..49584b6a4195281916d1bec1b02bfa15fa91d012 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -117,6 +117,17 @@ clock-output-names = "xin24m"; }; + gpu: gpu@10090000 { + compatible = "arm,mali-400"; + reg = <0x10090000 0x10000>; + clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; + clock-names = "core", "bus"; + assigned-clocks = <&cru ACLK_GPU>; + assigned-clock-rates = <100000000>; + resets = <&cru SRST_GPU>; + status = "disabled"; + }; + L2: l2-cache-controller@10138000 { compatible = "arm,pl310-cache"; reg = <0x10138000 0x1000>; diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts index 86a57f823616185a14ede94aebdcf853e6edfa16..70f0106d1252b26b7062d354758c9e2468ee16e3 100644 --- a/arch/arm/boot/dts/rv1108-evb.dts +++ b/arch/arm/boot/dts/rv1108-evb.dts @@ -222,6 +222,10 @@ status = "okay"; }; +&tsadc { + status = "okay"; +}; + &u2phy { status = "okay"; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index e7cd1315db1b7bc08c688867dd77c4687396fe92..76ea24636feb12026e0708c6c256cf0465722787 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -43,6 +43,7 @@ #include #include #include +#include / { #address-cells = <1>; #size-cells = <1>; @@ -70,6 +71,8 @@ compatible = "arm,cortex-a7"; reg = <0xf00>; clocks = <&cru ARMCLK>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <75>; operating-points-v2 = <&cpu_opp_table>; }; }; @@ -329,6 +332,60 @@ status = "disabled"; }; + thermal-zones { + soc_thermal: soc-thermal { + polling-delay-passive = <20>; + polling-delay = <1000>; + sustainable-power = <50>; + thermal-sensors = <&tsadc 0>; + + trips { + threshold: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + target: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + soc_crit: soc-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <4096>; + }; + }; + }; + }; + + tsadc: tsadc@10370000 { + compatible = "rockchip,rv1108-tsadc"; + reg = <0x10370000 0x100>; + interrupts = ; + assigned-clocks = <&cru SCLK_TSADC>; + assigned-clock-rates = <750000>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + rockchip,hw-tshut-temp = <120000>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + adc: adc@1038c000 { compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc"; reg = <0x1038c000 0x100>; @@ -740,6 +797,16 @@ }; }; + tsadc { + otp_out: otp-out { + rockchip,pins = <0 RK_PB7 RK_FUNC_1 &pcfg_pull_none>; + }; + + otp_gpio: otp-gpio { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>, diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index b1a26b42d1904a82817e1986da79fd963b934d2f..b44e63995583dfaa56a223c359f32aab2ad9c329 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -124,7 +124,7 @@ }; }; - ns_sram: sram@00200000 { + ns_sram: sram@200000 { compatible = "mmio-sram"; reg = <0x00200000 0x20000>; }; @@ -135,13 +135,13 @@ #size-cells = <1>; ranges; - nfc_sram: sram@00100000 { + nfc_sram: sram@100000 { compatible = "mmio-sram"; no-memory-wc; reg = <0x00100000 0x2400>; }; - usb0: gadget@00300000 { + usb0: gadget@300000 { #address-cells = <1>; #size-cells = <0>; compatible = "atmel,sama5d3-udc"; @@ -271,7 +271,7 @@ }; }; - usb1: ohci@00400000 { + usb1: ohci@400000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; @@ -280,7 +280,7 @@ status = "disabled"; }; - usb2: ehci@00500000 { + usb2: ehci@500000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00500000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; @@ -289,7 +289,7 @@ status = "disabled"; }; - L2: cache-controller@00a00000 { + L2: cache-controller@a00000 { compatible = "arm,pl310-cache"; reg = <0x00a00000 0x1000>; interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 554d0bdedc7a172c9bad3b8e84ac068cb388a412..1889b4dea066886ae83b0d97cf98981dd6544510 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -79,7 +79,7 @@ }; }; - sram: sram@00300000 { + sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x20000>; }; @@ -1408,7 +1408,7 @@ reg = <0x200000 0x2400>; }; - usb0: gadget@00500000 { + usb0: gadget@500000 { #address-cells = <1>; #size-cells = <0>; compatible = "atmel,sama5d3-udc"; @@ -1525,7 +1525,7 @@ }; }; - usb1: ohci@00600000 { + usb1: ohci@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1534,7 +1534,7 @@ status = "disabled"; }; - usb2: ehci@00700000 { + usb2: ehci@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 6d252ad050f671809c1e313bbb0771e7f5836a57..7f55050dd4057b6de1da1cc1053534d392c2cf47 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -166,14 +166,14 @@ }; }; - usb0: gadget@00500000 { + usb0: gadget@500000 { atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00600000 { + usb1: ohci@600000 { num-ports = <3>; atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH &pioD 26 GPIO_ACTIVE_LOW @@ -182,7 +182,7 @@ status = "okay"; }; - usb2: ehci@00700000 { + usb2: ehci@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi index 252e0d35f8466929618dcd28227f00075684600d..83e3d3e08fd44ae11d212feb091dd51701567c9a 100644 --- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi @@ -253,7 +253,7 @@ }; }; - usb0: gadget@00500000 { + usb0: gadget@500000 { atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 2fa36c525957cc193000f2db84ef50d07aa1ca85..b069644ed23886889f9a0430f2fc6a3cae88af49 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -113,7 +113,7 @@ }; }; - ns_sram: sram@00210000 { + ns_sram: sram@210000 { compatible = "mmio-sram"; reg = <0x00210000 0x10000>; }; @@ -130,7 +130,7 @@ reg = <0x100000 0x2400>; }; - usb0: gadget@00400000 { + usb0: gadget@400000 { #address-cells = <1>; #size-cells = <0>; compatible = "atmel,sama5d3-udc"; @@ -260,7 +260,7 @@ }; }; - usb1: ohci@00500000 { + usb1: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; @@ -269,7 +269,7 @@ status = "disabled"; }; - usb2: ehci@00600000 { + usb2: ehci@600000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; @@ -278,7 +278,7 @@ status = "disabled"; }; - L2: cache-controller@00a00000 { + L2: cache-controller@a00000 { compatible = "arm,pl310-cache"; reg = <0x00a00000 0x1000>; interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 4ea5c5a16c57eed5235fc0f7365ce1a9d5e005f5..88d7e5631d340740d2642b5b0e8770ea89cc895b 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -27,6 +27,7 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <1196000000>; + clocks = <&cpg_clocks SH73A0_CLK_Z>; power-domains = <&pd_a2sl>; next-level-cache = <&L2>; }; @@ -35,6 +36,7 @@ compatible = "arm,cortex-a9"; reg = <1>; clock-frequency = <1196000000>; + clocks = <&cpg_clocks SH73A0_CLK_Z>; power-domains = <&pd_a2sl>; next-level-cache = <&L2>; }; diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index 6f720756057d62eec2e24dc7fc453aafa9edfc59..35e944d8b5c42307c8dbb9f98d34b35a7457cc46 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -92,7 +92,7 @@ interrupts = <18 IRQ_TYPE_EDGE_RISING>, <19 IRQ_TYPE_EDGE_RISING>; }; - ak8974@0f { + ak8974@f { /* Magnetometer */ compatible = "asahi-kasei,ak8974"; reg = <0x0f>; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 3c9f2f068c2f2387ea4b8927782f87eb72f9ba67..0e7d77d719d759955a3de5a5231d3fab16c19c0f 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -143,7 +143,7 @@ interrupts = <18 IRQ_TYPE_EDGE_RISING>, <19 IRQ_TYPE_EDGE_RISING>; }; - ak8974@0f { + ak8974@f { /* Magnetometer */ compatible = "asahi-kasei,ak8974"; reg = <0x0f>; diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi index 34c119a66f14b44a2878bbbb9eb21fba7ea87fb6..d0a24d9e517a5e8ba5403b1fd2fbd39bff622813 100644 --- a/arch/arm/boot/dts/stih407-clock.dtsi +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -90,7 +90,7 @@ clock-output-names = "clk-s-icn-reg-0"; }; - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; @@ -131,7 +131,7 @@ clock-critical = <0>; /* clk-s-c0-fs0-ch0 */ }; - clk_s_c0: clockgen-c@09103000 { + clk_s_c0: clockgen-c@9103000 { compatible = "st,clkgen-c32"; reg = <0x9103000 0x1000>; @@ -220,7 +220,7 @@ "clk-s-d0-fs0-ch3"; }; - clockgen-d0@09104000 { + clockgen-d0@9104000 { compatible = "st,clkgen-c32"; reg = <0x9104000 0x1000>; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 12c0757594d7fc305a1aea564419e69bf508c0da..cf3756976c396b74079ebcb2c3fdda8769793cdf 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -72,19 +72,19 @@ }; }; - intc: interrupt-controller@08761000 { + intc: interrupt-controller@8761000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x08761000 0x1000>, <0x08760100 0x100>; }; - scu@08760000 { + scu@8760000 { compatible = "arm,cortex-a9-scu"; reg = <0x08760000 0x1000>; }; - timer@08760200 { + timer@8760200 { interrupt-parent = <&intc>; compatible = "arm,cortex-a9-global-timer"; reg = <0x08760200 0x100>; @@ -555,7 +555,7 @@ status = "disabled"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { compatible = "st,sdhci-stih407", "st,sdhci"; status = "disabled"; reg = <0x09060000 0x7ff>, <0x9061008 0x20>; @@ -570,7 +570,7 @@ bus-width = <8>; }; - mmc1: sdhci@09080000 { + mmc1: sdhci@9080000 { compatible = "st,sdhci-stih407", "st,sdhci"; status = "disabled"; reg = <0x09080000 0x7ff>; @@ -715,14 +715,14 @@ status = "disabled"; }; - rng10: rng@08a89000 { + rng10: rng@8a89000 { compatible = "st,rng"; reg = <0x08a89000 0x1000>; clocks = <&clk_sysin>; status = "okay"; }; - rng11: rng@08a8a000 { + rng11: rng@8a8a000 { compatible = "st,rng"; reg = <0x08a8a000 0x1000>; clocks = <&clk_sysin>; @@ -756,14 +756,14 @@ <&clk_s_c0_flexgen CLK_ETH_PHY>; }; - rng10: rng@08a89000 { + rng10: rng@8a89000 { compatible = "st,rng"; reg = <0x08a89000 0x1000>; clocks = <&clk_sysin>; status = "okay"; }; - rng11: rng@08a8a000 { + rng11: rng@8a8a000 { compatible = "st,rng"; reg = <0x08a8a000 0x1000>; clocks = <&clk_sysin>; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index bd1a82e8fffee706d8f8030bb01c209fe23b8521..a29090077fdf5637e7a173c70288e6fbbfc02228 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -56,7 +56,7 @@ interrupt-names = "irqmux"; ranges = <0 0x09610000 0x6000>; - pio0: gpio@09610000 { + pio0: gpio@9610000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -64,7 +64,7 @@ reg = <0x0 0x100>; st,bank-name = "PIO0"; }; - pio1: gpio@09611000 { + pio1: gpio@9611000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -72,7 +72,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO1"; }; - pio2: gpio@09612000 { + pio2: gpio@9612000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -80,7 +80,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO2"; }; - pio3: gpio@09613000 { + pio3: gpio@9613000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -88,7 +88,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO3"; }; - pio4: gpio@09614000 { + pio4: gpio@9614000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -97,7 +97,7 @@ st,bank-name = "PIO4"; }; - pio5: gpio@09615000 { + pio5: gpio@9615000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -380,7 +380,7 @@ interrupt-names = "irqmux"; ranges = <0 0x09200000 0x10000>; - pio10: pio@09200000 { + pio10: pio@9200000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -388,7 +388,7 @@ reg = <0x0 0x100>; st,bank-name = "PIO10"; }; - pio11: pio@09201000 { + pio11: pio@9201000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -396,7 +396,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO11"; }; - pio12: pio@09202000 { + pio12: pio@9202000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -404,7 +404,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO12"; }; - pio13: pio@09203000 { + pio13: pio@9203000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -412,7 +412,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO13"; }; - pio14: pio@09204000 { + pio14: pio@9204000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -420,7 +420,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO14"; }; - pio15: pio@09205000 { + pio15: pio@9205000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -428,7 +428,7 @@ reg = <0x5000 0x100>; st,bank-name = "PIO15"; }; - pio16: pio@09206000 { + pio16: pio@9206000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -436,7 +436,7 @@ reg = <0x6000 0x100>; st,bank-name = "PIO16"; }; - pio17: pio@09207000 { + pio17: pio@9207000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -444,7 +444,7 @@ reg = <0x7000 0x100>; st,bank-name = "PIO17"; }; - pio18: pio@09208000 { + pio18: pio@9208000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -452,7 +452,7 @@ reg = <0x8000 0x100>; st,bank-name = "PIO18"; }; - pio19: pio@09209000 { + pio19: pio@9209000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -940,7 +940,7 @@ interrupt-names = "irqmux"; ranges = <0 0x09210000 0x10000>; - pio20: pio@09210000 { + pio20: pio@9210000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -973,7 +973,7 @@ interrupt-names = "irqmux"; ranges = <0 0x09220000 0x6000>; - pio30: gpio@09220000 { + pio30: gpio@9220000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -981,7 +981,7 @@ reg = <0x0 0x100>; st,bank-name = "PIO30"; }; - pio31: gpio@09221000 { + pio31: gpio@9221000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -989,7 +989,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO31"; }; - pio32: gpio@09222000 { + pio32: gpio@9222000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -997,7 +997,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO32"; }; - pio33: gpio@09223000 { + pio33: gpio@9223000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1005,7 +1005,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO33"; }; - pio34: gpio@09224000 { + pio34: gpio@9224000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1013,7 +1013,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO34"; }; - pio35: gpio@09225000 { + pio35: gpio@9225000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1168,7 +1168,7 @@ interrupt-names = "irqmux"; ranges = <0 0x09230000 0x3000>; - pio40: gpio@09230000 { + pio40: gpio@9230000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1176,7 +1176,7 @@ reg = <0 0x100>; st,bank-name = "PIO40"; }; - pio41: gpio@09231000 { + pio41: gpio@9231000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1184,7 +1184,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO41"; }; - pio42: gpio@09232000 { + pio42: gpio@9232000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 83313b51915dd45c4a136f7ba1590387ace7e78b..9830be57743368b651a5b1d18f8c66dbfe6dcce1 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -30,7 +30,7 @@ soc { - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { max-frequency = <200000000>; sd-uhs-sdr50; sd-uhs-sdr104; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index 93c14d183e291b14cb0b094dd2a0b57762a2d08f..c663b70c43a7426ffa09667c4fbb30e657ca5a13 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -109,14 +109,14 @@ status = "okay"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { pinctrl-0 = <&pinctrl_sd0>; bus-width = <4>; status = "okay"; }; /* high speed expansion connector */ - mmc1: sdhci@09080000 { + mmc1: sdhci@9080000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi index 07c8ef9d77f6e790a82e37cbde7ebf1dcd8ef5dc..fde5df17f57590e1a9c6f8dc4a8ab200ea7cba91 100644 --- a/arch/arm/boot/dts/stih410-clock.dtsi +++ b/arch/arm/boot/dts/stih410-clock.dtsi @@ -92,7 +92,7 @@ clock-output-names = "clk-s-icn-reg-0"; }; - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; @@ -134,7 +134,7 @@ clock-critical = <0>; /* clk-s-c0-fs0-ch0 */ }; - clk_s_c0: clockgen-c@09103000 { + clk_s_c0: clockgen-c@9103000 { compatible = "st,clkgen-c32"; reg = <0x9103000 0x1000>; @@ -230,7 +230,7 @@ "clk-s-d0-fs0-ch3"; }; - clockgen-d0@09104000 { + clockgen-d0@9104000 { compatible = "st,clkgen-c32"; reg = <0x9104000 0x1000>; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 21fe72b183d87c6f470b0ebce2aedcb1881c9a1a..cffa50db5d7240e358e52df23c2a929af428ecf3 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -282,7 +282,7 @@ <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; }; - sti-cec@094a087c { + sti-cec@94a087c { compatible = "st,stih-cec"; reg = <0x94a087c 0x64>; clocks = <&clk_sysin>; diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index 438e54c585b1c1291a6cfc362362b06d1460dc66..4e6d915c85ff0aef06739e910f0fa9d0ba040497 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -75,11 +75,11 @@ st,i2c-min-sda-pulse-width-us = <5>; }; - mmc1: sdhci@09080000 { + mmc1: sdhci@9080000 { status = "okay"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { status = "okay"; max-frequency = <200000000>; sd-uhs-sdr50; diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi index ee6614b79f7dbed88566e64f6458e0ff534949b2..9a157c1a99b1d12ad2e326a2cac01566cd124940 100644 --- a/arch/arm/boot/dts/stih418-clock.dtsi +++ b/arch/arm/boot/dts/stih418-clock.dtsi @@ -92,7 +92,7 @@ clock-output-names = "clk-s-icn-reg-0"; }; - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; @@ -131,7 +131,7 @@ "clk-s-c0-fs0-ch3"; }; - clk_s_c0: clockgen-c@09103000 { + clk_s_c0: clockgen-c@9103000 { compatible = "st,clkgen-c32"; reg = <0x9103000 0x1000>; @@ -223,7 +223,7 @@ "clk-s-d0-fs0-ch3"; }; - clockgen-d0@09104000 { + clockgen-d0@9104000 { compatible = "st,clkgen-c32"; reg = <0x9104000 0x1000>; diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi index 965f88160718ebe5b224f48acaf55175151a7e91..e6525ab4d9bb6d9c6ae87513e861b3846b3109eb 100644 --- a/arch/arm/boot/dts/stih418.dtsi +++ b/arch/arm/boot/dts/stih418.dtsi @@ -100,7 +100,7 @@ phy-names = "usb"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>; assigned-clock-parents = <&clk_s_c0_pll1 0>; assigned-clock-rates = <200000000>; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index 4b8f62f89664034420275e729e0a2f5471ea510f..7f80c2c414c89da5f9f16fb5c6b0b0a0f8c0280d 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -62,12 +62,12 @@ status = "okay"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { non-removable; status = "okay"; }; - mmc1: sdhci@09080000 { + mmc1: sdhci@9080000 { status = "okay"; }; @@ -102,7 +102,7 @@ fixed-link = <0 1 1000 0 0>; }; - demux@08a20000 { + demux@8a20000 { compatible = "st,stih407-c8sectpfe"; status = "okay"; reg = <0x08a20000 0x10000>, diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index 69a957963fa8c96d1586bdd2a8d7df2732d42904..2d4e7171769454f4405774aad212ce1fe6c6f160 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -83,6 +83,13 @@ gpios = <&gpioc 13 0>; }; }; + + usbotg_hs_phy: usb-phy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>; + clock-names = "main_clk"; + }; }; &clk_hse { @@ -93,6 +100,14 @@ status = "okay"; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins_b>; + pinctrl-names = "default"; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + &rtc { status = "okay"; }; @@ -102,3 +117,12 @@ pinctrl-names = "default"; status = "okay"; }; + +&usbotg_hs { + dr_mode = "host"; + phys = <&usbotg_hs_phy>; + phy-names = "usb2-phy"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index 7f3560c0211dd8972f06a89e34d54c5c00d9fbfa..ae94d86c53c490d41267936cd36b3ef7f3fdd140 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -40,7 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include +#include #include / { @@ -165,35 +165,35 @@ usart1_pins_a: usart1@0 { pins1 { - pinmux = ; + pinmux = ; /* USART1_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; /* USART1_RX */ bias-disable; }; }; usart3_pins_a: usart3@0 { pins1 { - pinmux = ; + pinmux = ; /* USART3_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; /* USART3_RX */ bias-disable; }; }; usbotg_fs_pins_a: usbotg_fs@0 { pins { - pinmux = , - , - ; + pinmux = , /* OTG_FS_ID */ + , /* OTG_FS_DM */ + ; /* OTG_FS_DP */ bias-disable; drive-push-pull; slew-rate = <2>; @@ -202,9 +202,9 @@ usbotg_fs_pins_b: usbotg_fs@1 { pins { - pinmux = , - , - ; + pinmux = , /* OTG_HS_ID */ + , /* OTG_HS_DM */ + ; /* OTG_HS_DP */ bias-disable; drive-push-pull; slew-rate = <2>; @@ -213,18 +213,18 @@ usbotg_hs_pins_a: usbotg_hs@0 { pins { - pinmux = , - , - , - , - , - , - , - , - , - , - , - ; + pinmux = , /* OTG_HS_ULPI_NXT*/ + , /* OTG_HS_ULPI_DIR */ + , /* OTG_HS_ULPI_STP */ + , /* OTG_HS_ULPI_CK */ + , /* OTG_HS_ULPI_D0 */ + , /* OTG_HS_ULPI_D1 */ + , /* OTG_HS_ULPI_D2 */ + , /* OTG_HS_ULPI_D3 */ + , /* OTG_HS_ULPI_D4 */ + , /* OTG_HS_ULPI_D5 */ + , /* OTG_HS_ULPI_D6 */ + ; /* OTG_HS_ULPI_D7 */ bias-disable; drive-push-pull; slew-rate = <2>; @@ -233,49 +233,49 @@ ethernet_mii: mii@0 { pins { - pinmux = , - , - , - , - , - , - , - , - , - , - , - , - , - ; + pinmux = , /* ETH_MII_TXD0_ETH_RMII_TXD0 */ + , /* ETH_MII_TXD1_ETH_RMII_TXD1 */ + , /* ETH_MII_TXD2 */ + , /* ETH_MII_TXD3 */ + , /* ETH_MII_TX_CLK */ + , /* ETH_MII_TX_EN_ETH_RMII_TX_EN */ + , /* ETH_MDIO */ + , /* ETH_MDC */ + , /* ETH_MII_RX_CLK_ETH_RMII_REF_CLK */ + , /* ETH_MII_RX_DV_ETH_RMII_CRS_DV */ + , /* ETH_MII_RXD0_ETH_RMII_RXD0 */ + , /* ETH_MII_RXD1_ETH_RMII_RXD1 */ + , /* ETH_MII_RXD2 */ + ; /* ETH_MII_RXD3 */ slew-rate = <2>; }; }; adc3_in8_pin: adc@200 { pins { - pinmux = ; + pinmux = ; }; }; pwm1_pins: pwm@1 { pins { - pinmux = , - , - ; + pinmux = , /* TIM1_CH1 */ + , /* TIM1_CH1N */ + ; /* TIM1_BKIN */ }; }; pwm3_pins: pwm@3 { pins { - pinmux = , - ; + pinmux = , /* TIM3_CH1 */ + ; /* TIM3_CH2 */ }; }; i2c1_pins: i2c1@0 { pins { - pinmux = , - ; + pinmux = , /* I2C1_SDA */ + ; /* I2C1_SCL */ bias-disable; drive-open-drain; slew-rate = <3>; @@ -284,55 +284,55 @@ ltdc_pins: ltdc@0 { pins { - pinmux = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; + pinmux = , /* LCD_HSYNC */ + , /* LCD_VSYNC */ + , /* LCD_CLK */ + , /* LCD_R0 */ + , /* LCD_R1 */ + , /* LCD_R2 */ + , /* LCD_R3 */ + , /* LCD_R4 */ + , /* LCD_R5 */ + , /* LCD_R6*/ + , /* LCD_R7 */ + , /* LCD_G0 */ + , /* LCD_G1 */ + , /* LCD_G2 */ + , /* LCD_G3 */ + , /* LCD_G4 */ + , /* LCD_B0 */ + , /* LCD_B1 */ + , /* LCD_B2 */ + , /* LCD_B3*/ + , /* LCD_G5 */ + , /* LCD_G6 */ + , /* LCD_G7 */ + , /* LCD_B4 */ + , /* LCD_B5 */ + , /* LCD_B6 */ + , /* LCD_B7 */ + ; /* LCD_DE */ slew-rate = <2>; }; }; dcmi_pins: dcmi@0 { pins { - pinmux = , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; + pinmux = , /* DCMI_HSYNC */ + , /* DCMI_VSYNC */ + , /* DCMI_PIXCLK */ + , /* DCMI_D0 */ + , /* DCMI_D1 */ + , /* DCMI_D2 */ + , /* DCMI_D3 */ + , /*DCMI_D4 */ + , /* DCMI_D5 */ + , /* DCMI_D6 */ + , /* DCMI_D7 */ + , /* DCMI_D8 */ + , /* DCMI_D9 */ + , /* DCMI_D10 */ + ; /* DCMI_D11 */ bias-disable; drive-push-pull; slew-rate = <3>; diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts index 18f6560744379123f770a5f4a6a5733e4f10f87c..4d85dba59e1deadea023c5af85cd23b5e1823f34 100644 --- a/arch/arm/boot/dts/stm32f746-disco.dts +++ b/arch/arm/boot/dts/stm32f746-disco.dts @@ -61,6 +61,20 @@ serial0 = &usart1; }; + usbotg_hs_phy: usb-phy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>; + clock-names = "main_clk"; + }; + + /* This turns on vbus for otg fs for host mode (dwc2) */ + vcc5v_otg_fs: vcc5v-otg-fs-regulator { + compatible = "regulator-fixed"; + gpio = <&gpiod 5 0>; + regulator-name = "vcc5_host1"; + regulator-always-on; + }; }; &clk_hse { @@ -72,3 +86,19 @@ pinctrl-names = "default"; status = "okay"; }; + +&usbotg_fs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_fs_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + phys = <&usbotg_hs_phy>; + phy-names = "usb2-phy"; + pinctrl-0 = <&usbotg_hs_pins_b>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 5f941789405903f08db94c632c84279e0944ad39..5f66d151eedb15fa5481323a17bae4f23c1d404c 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -42,7 +42,7 @@ #include "skeleton.dtsi" #include "armv7-m.dtsi" -#include +#include #include #include @@ -82,6 +82,27 @@ status = "disabled"; }; + timers2: timers@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32-timer-trigger"; + reg = <1>; + status = "disabled"; + }; + }; + timer3: timer@40000400 { compatible = "st,stm32-timer"; reg = <0x40000400 0x400>; @@ -90,6 +111,27 @@ status = "disabled"; }; + timers3: timers@40000400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000400 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32-timer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + timer4: timer@40000800 { compatible = "st,stm32-timer"; reg = <0x40000800 0x400>; @@ -98,6 +140,27 @@ status = "disabled"; }; + timers4: timers@40000800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000800 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32-timer-trigger"; + reg = <3>; + status = "disabled"; + }; + }; + timer5: timer@40000c00 { compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; @@ -105,6 +168,27 @@ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; }; + timers5: timers@40000c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000C00 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32-timer-trigger"; + reg = <4>; + status = "disabled"; + }; + }; + timer6: timer@40001000 { compatible = "st,stm32-timer"; reg = <0x40001000 0x400>; @@ -113,6 +197,22 @@ status = "disabled"; }; + timers6: timers@40001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001000 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>; + clock-names = "int"; + status = "disabled"; + + timer@5 { + compatible = "st,stm32-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + timer7: timer@40001400 { compatible = "st,stm32-timer"; reg = <0x40001400 0x400>; @@ -121,6 +221,73 @@ status = "disabled"; }; + timers7: timers@40001400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001400 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>; + clock-names = "int"; + status = "disabled"; + + timer@6 { + compatible = "st,stm32-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + timers12: timers@40001800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001800 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timers@40001c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001C00 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers14: timers@40002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40002000 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + rtc: rtc@40002800 { compatible = "st,stm32-rtc"; reg = <0x40002800 0x400>; @@ -167,6 +334,18 @@ status = "disabled"; }; + i2c1: i2c@40005400 { + compatible = "st,stm32f7-i2c"; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32F7_APB1_RESET(I2C1)>; + clocks = <&rcc 1 CLK_I2C1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + cec: cec@40006c00 { compatible = "st,stm32-cec"; reg = <0x40006C00 0x400>; @@ -192,6 +371,48 @@ status = "disabled"; }; + timers1: timers@40010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + }; + + timers8: timers@40010400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010400 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32-timer-trigger"; + reg = <7>; + status = "disabled"; + }; + }; + usart1: serial@40011000 { compatible = "st,stm32f7-uart"; reg = <0x40011000 0x400>; @@ -221,6 +442,57 @@ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; }; + timers9: timers@40014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014000 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@8 { + compatible = "st,stm32-timer-trigger"; + reg = <8>; + status = "disabled"; + }; + }; + + timers10: timers@40014400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014400 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers11: timers@40014800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014800 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + pwrcfg: power-config@40007000 { compatible = "syscon"; reg = <0x40007000 0x400>; @@ -347,7 +619,7 @@ cec_pins_a: cec@0 { pins { - pinmux = ; + pinmux = ; /* HDMI CEC */ slew-rate = <0>; drive-open-drain; bias-disable; @@ -356,27 +628,88 @@ usart1_pins_a: usart1@0 { pins1 { - pinmux = ; + pinmux = ; /* USART1_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; /* USART1_RX */ bias-disable; }; }; usart1_pins_b: usart1@1 { pins1 { - pinmux = ; + pinmux = ; /* USART1_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; /* USART1_RX */ + bias-disable; + }; + }; + + i2c1_pins_b: i2c1@0 { + pins { + pinmux = , /* I2C1 SDA */ + ; /* I2C1 SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + usbotg_hs_pins_a: usbotg-hs@0 { + pins { + pinmux = , /* OTG_HS_ULPI_NXT */ + , /* OTG_HS_ULPI_DIR */ + , /* OTG_HS_ULPI_STP */ + , /* OTG_HS_ULPI_CK */ + , /* OTG_HS_ULPI_D0 */ + , /* OTG_HS_ULPI_D1 */ + , /* OTG_HS_ULPI_D2 */ + , /* OTG_HS_ULPI_D3 */ + , /* OTG_HS_ULPI_D4 */ + , /* OTG_HS_ULPI_D5 */ + , /* OTG_HS_ULPI_D6 */ + ; /* OTG_HS_ULPI_D7 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + usbotg_hs_pins_b: usbotg-hs@1 { + pins { + pinmux = , /* OTG_HS_ULPI_NXT */ + , /* OTG_HS_ULPI_DIR */ + , /* OTG_HS_ULPI_STP */ + , /* OTG_HS_ULPI_CK */ + , /* OTG_HS_ULPI_D0 */ + , /* OTG_HS_ULPI_D1 */ + , /* OTG_HS_ULPI_D2 */ + , /* OTG_HS_ULPI_D3 */ + , /* OTG_HS_ULPI_D4 */ + , /* OTG_HS_ULPI_D5 */ + , /* OTG_HS_ULPI_D6 */ + ; /* OTG_HS_ULPI_D7 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + usbotg_fs_pins_a: usbotg-fs@0 { + pins { + pinmux = , /* OTG_FS_ID */ + , /* OTG_FS_DM */ + ; /* OTG_FS_DP */ bias-disable; + drive-push-pull; + slew-rate = <2>; }; }; }; @@ -431,6 +764,24 @@ st,mem2mem; status = "disabled"; }; + + usbotg_hs: usb@40040000 { + compatible = "st,stm32f7-hsotg"; + reg = <0x40040000 0x40000>; + interrupts = <77>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHS)>; + clock-names = "otg"; + status = "disabled"; + }; + + usbotg_fs: usb@50000000 { + compatible = "st,stm32f4x9-fsotg"; + reg = <0x50000000 0x40000>; + interrupts = <67>; + clocks = <&rcc 0 STM32F7_AHB2_CLOCK(OTGFS)>; + clock-names = "otg"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi index 76bbd6575fae6fdabdf1806ee91601486218376d..65c1cd0439872a612fad7a7af7017dc3064a54da 100644 --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi @@ -40,7 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include +#include / { soc { @@ -55,7 +55,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x0 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOA_CK>; st,bank-name = "GPIOA"; }; @@ -63,7 +63,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x400 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOB_CK>; st,bank-name = "GPIOB"; }; @@ -71,7 +71,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x800 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOC_CK>; st,bank-name = "GPIOC"; }; @@ -79,7 +79,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0xc00 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOD_CK>; st,bank-name = "GPIOD"; }; @@ -87,7 +87,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1000 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOE_CK>; st,bank-name = "GPIOE"; }; @@ -95,7 +95,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1400 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOF_CK>; st,bank-name = "GPIOF"; }; @@ -103,7 +103,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1800 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOG_CK>; st,bank-name = "GPIOG"; }; @@ -111,7 +111,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1c00 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOH_CK>; st,bank-name = "GPIOH"; }; @@ -119,7 +119,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2000 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOI_CK>; st,bank-name = "GPIOI"; }; @@ -127,7 +127,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2400 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOJ_CK>; st,bank-name = "GPIOJ"; }; @@ -135,32 +135,32 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2800 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOK_CK>; st,bank-name = "GPIOK"; }; usart1_pins: usart1@0 { pins1 { - pinmux = ; + pinmux = ; /* USART1_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; /* USART1_RX */ bias-disable; }; }; usart2_pins: usart2@0 { pins1 { - pinmux = ; + pinmux = ; /* USART2_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; /* USART2_RX */ bias-disable; }; }; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 26de3157870110d22aa6c2508df4ba6ad7fbd871..bbfcbaca0b36bc30e44b63dd5bc9c7b9ef872f91 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -42,6 +42,8 @@ #include "skeleton.dtsi" #include "armv7-m.dtsi" +#include +#include / { clocks { @@ -51,10 +53,16 @@ clock-frequency = <0>; }; - timer_clk: timer-clk { + clk_lse: clk-lse { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <125000000>; + clock-frequency = <32768>; + }; + + clk_i2s: i2s_ckin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; }; }; @@ -63,7 +71,33 @@ compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; interrupts = <50>; - clocks = <&timer_clk>; + clocks = <&rcc TIM5_CK>; + }; + + lptimer1: timer@40002400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x40002400 0x400>; + clocks = <&rcc LPTIM1_CK>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + status = "disabled"; + }; + + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + status = "disabled"; + }; }; usart2: serial@40004400 { @@ -71,13 +105,13 @@ reg = <0x40004400 0x400>; interrupts = <38>; status = "disabled"; - clocks = <&timer_clk>; + clocks = <&rcc USART2_CK>; }; dac: dac@40007400 { compatible = "st,stm32h7-dac-core"; reg = <0x40007400 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc DAC12_CK>; clock-names = "pclk"; #address-cells = <1>; #size-cells = <0>; @@ -103,8 +137,7 @@ reg = <0x40011000 0x400>; interrupts = <37>; status = "disabled"; - clocks = <&timer_clk>; - + clocks = <&rcc USART1_CK>; }; dma1: dma@40020000 { @@ -118,9 +151,10 @@ <16>, <17>, <47>; - clocks = <&timer_clk>; + clocks = <&rcc DMA1_CK>; #dma-cells = <4>; st,mem2mem; + dma-requests = <8>; status = "disabled"; }; @@ -135,17 +169,28 @@ <68>, <69>, <70>; - clocks = <&timer_clk>; + clocks = <&rcc DMA2_CK>; #dma-cells = <4>; st,mem2mem; + dma-requests = <8>; status = "disabled"; }; + dmamux1: dma-router@40020800 { + compatible = "st,stm32h7-dmamux"; + reg = <0x40020800 0x1c>; + #dma-cells = <3>; + dma-channels = <16>; + dma-requests = <128>; + dma-masters = <&dma1 &dma2>; + clocks = <&rcc DMA1_CK>; + }; + adc_12: adc@40022000 { compatible = "st,stm32h7-adc-core"; reg = <0x40022000 0x400>; interrupts = <18>; - clocks = <&timer_clk>; + clocks = <&rcc ADC12_CK>; clock-names = "bus"; interrupt-controller; #interrupt-cells = <1>; @@ -172,11 +217,121 @@ }; }; + mdma1: dma@52000000 { + compatible = "st,stm32h7-mdma"; + reg = <0x52000000 0x1000>; + interrupts = <122>; + clocks = <&rcc MDMA_CK>; + #dma-cells = <5>; + dma-channels = <16>; + dma-requests = <32>; + }; + + lptimer2: timer@58002400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x58002400 0x400>; + clocks = <&rcc LPTIM2_CK>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + status = "disabled"; + }; + + trigger@1 { + compatible = "st,stm32-lptimer-trigger"; + reg = <1>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + status = "disabled"; + }; + }; + + lptimer3: timer@58002800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x58002800 0x400>; + clocks = <&rcc LPTIM3_CK>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + status = "disabled"; + }; + + trigger@2 { + compatible = "st,stm32-lptimer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + + lptimer4: timer@58002c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x58002c00 0x400>; + clocks = <&rcc LPTIM4_CK>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + status = "disabled"; + }; + }; + + lptimer5: timer@58003000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x58003000 0x400>; + clocks = <&rcc LPTIM5_CK>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + status = "disabled"; + }; + }; + + vrefbuf: regulator@58003C00 { + compatible = "st,stm32-vrefbuf"; + reg = <0x58003C00 0x8>; + clocks = <&rcc VREF_CK>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2500000>; + status = "disabled"; + }; + + rcc: reset-clock-controller@58024400 { + compatible = "st,stm32h743-rcc", "st,stm32-rcc"; + reg = <0x58024400 0x400>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>; + st,syscfg = <&pwrcfg>; + }; + + pwrcfg: power-config@58024800 { + compatible = "syscon"; + reg = <0x58024800 0x400>; + }; + adc_3: adc@58026000 { compatible = "st,stm32h7-adc-core"; reg = <0x58026000 0x400>; interrupts = <127>; - clocks = <&timer_clk>; + clocks = <&rcc ADC3_CK>; clock-names = "bus"; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index 6c07786e7ddb9195fc88108d5d1906deb13f6c12..9f0e72c67219adba7a2f9d47ed69d596539420ac 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -81,7 +81,7 @@ }; &clk_hse { - clock-frequency = <125000000>; + clock-frequency = <25000000>; }; &usart1 { diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index f80d37ddc4c6638e2d0f94da05af1ac9afa91ddc..09e909576c61f726aad93e3f4ddc9923b87b628f 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -62,8 +62,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_a1000>; red { label = "a1000:red:usr"; @@ -79,8 +77,6 @@ reg_emac_3v3: emac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&emac_power_pin_a1000>; regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -129,8 +125,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; @@ -140,8 +134,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -156,7 +148,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; @@ -170,8 +162,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -187,18 +177,6 @@ status = "okay"; }; -&pio { - emac_power_pin_a1000: emac_power_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; - - led_pins_a1000: led_pins@0 { - pins = "PH10", "PH20"; - function = "gpio_out"; - }; -}; - #include "axp209.dtsi" ®_dcdc2 { @@ -236,13 +214,13 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 6b02de592a0267dd3433483dcf5995de2a6813ad..39ba4ccb9e2e5af505c3134238382d1935f10a9a 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -68,8 +68,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; @@ -79,8 +77,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -95,7 +91,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; @@ -108,8 +104,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -125,12 +119,6 @@ status = "okay"; }; -&pio { - usb2_vbus_pin_a: usb2_vbus_pin@0 { - pins = "PH12"; - }; -}; - ®_usb0_vbus { regulator-boot-on; status = "okay"; @@ -147,7 +135,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index a7d61994b8fd272d2d4531fe15d1e4e8653622d3..dfc88aee4fe35f04209e585661288cf0dc8f3de9 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -65,8 +65,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -80,14 +78,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; ft5306de4: touchscreen@38 { @@ -104,21 +98,21 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@800 { + button-800 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <800000>; }; - button@1000 { + button-1000 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <1000000>; }; - button@1200 { + button-1200 { label = "Back"; linux,code = ; channel = <0>; @@ -127,8 +121,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -141,13 +133,13 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -164,7 +156,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 404ce769489968214107adca9a6d2d4592e33e3e..1982c8c238c54b3b9d484db4206f6d53a4a2b980 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -59,6 +59,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -90,6 +101,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -99,8 +114,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; @@ -109,9 +122,17 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -121,14 +142,12 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; @@ -141,8 +160,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -163,13 +180,13 @@ }; &pio { - led_pins_cubieboard: led_pins@0 { + led_pins_cubieboard: led-pins { pins = "PH20", "PH21"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -221,14 +238,14 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index e0777ae808c749bd2e1a81ee2ce1740267971de6..147cbc5e08ac560cbd703da412f47628aca10f3e 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -58,8 +58,6 @@ backlight: backlight { compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_dsrv9703c>; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; @@ -77,10 +75,8 @@ max-microvolt = <3000000>; }; - reg_motor: reg_motor { + reg_motor: reg-motor { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&motor_pins>; regulator-name = "vcc-motor"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; @@ -90,8 +86,6 @@ }; &codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; @@ -105,8 +99,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -118,15 +110,11 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; /* pull-ups and devices require AXP209 LDO3 */ status = "failed"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; ft5406ee8: touchscreen@38 { @@ -134,8 +122,6 @@ reg = <0x38>; interrupt-parent = <&pio>; interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_pins>; reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>; touchscreen-size-x = <1024>; touchscreen-size-y = <768>; @@ -146,14 +132,14 @@ vref-supply = <®_ldo2>; status = "okay"; - button@400 { + button-400 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <400000>; }; - button@800 { + button-800 { label = "Volume Up"; linux,code = ; channel = <0>; @@ -162,8 +148,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -176,33 +160,13 @@ }; &pio { - bl_en_pin_dsrv9703c: bl_en_pin@0 { - pins = "PH7"; - function = "gpio_out"; - }; - - codec_pa_pin: codec_pa_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; - - motor_pins: motor_pins@0 { - pins = "PB3"; - function = "gpio_out"; - }; - - touchscreen_pins: touchscreen_pins@0 { - pins = "PB13"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -211,7 +175,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -250,7 +214,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index d8bfd7b74916262dcfeebe7e11cef06d1ca35149..41ca8bded89f020883aa6297dc4453f8a71bbc44 100644 --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -72,8 +72,6 @@ */ &codec { /* PH15 controls power to external amplifier (ft2012q) */ - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -91,8 +89,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -104,8 +100,6 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; /* Accelerometer */ @@ -122,21 +116,21 @@ status = "okay"; - button@158 { + button-158 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <158730>; }; - button@349 { + button-349 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <349206>; }; - button@1142 { + button-1142 { label = "Esc"; linux,code = ; channel = <0>; @@ -145,8 +139,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */ @@ -154,13 +146,6 @@ status = "okay"; }; -&pio { - codec_pa_pin: codec_pa_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -197,7 +182,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 856cfc9128e6c5baaff8f71bd76245522e882074..f33e42d6ce8bad174c9778a8f5ccb6a4b66ce751 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -80,8 +80,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy0>; status = "okay"; }; @@ -92,7 +90,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; @@ -106,8 +104,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -123,27 +119,11 @@ status = "okay"; }; -&pio { - pinctrl-names = "default"; - pinctrl-0 = <&hackberry_hogs>; - - hackberry_hogs: hogs@0 { - pins = "PH19"; - function = "gpio_out"; - }; - - usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { - pins = "PH12"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { status = "okay"; }; ®_usb2_vbus { - pinctrl-0 = <&usb2_vbus_pin_hackberry>; gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -156,6 +136,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index 6506595268b2a5c0f8ef12ae798a47515b8fe070..35c57d065dd8f2d306da46fb98f09e9f8416e375 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -63,8 +63,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -78,8 +76,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -92,13 +88,13 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -116,7 +112,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index d51d8c302dafac2fa01e08fe2e57b110b3b04b58..9482e831a9a169e7e9ce7f63108b9a5666d9d66b 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -58,8 +58,6 @@ backlight: backlight { compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_inet>; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; @@ -88,8 +86,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -101,8 +97,6 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; /* Accelerometer */ @@ -115,8 +109,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; ft5x: touchscreen@38 { @@ -124,8 +116,6 @@ reg = <0x38>; interrupt-parent = <&pio>; interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_wake_pin>; wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */ touchscreen-size-x = <600>; touchscreen-size-y = <1024>; @@ -137,21 +127,21 @@ vref-supply = <®_ldo2>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <200000>; }; - button@1000 { + button-1000 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <1000000>; }; - button@1200 { + button-1200 { label = "Home"; linux,code = ; channel = <0>; @@ -160,8 +150,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -178,23 +166,13 @@ }; &pio { - bl_en_pin_inet: bl_en_pin@0 { - pins = "PH7"; - function = "gpio_out"; - }; - - touchscreen_wake_pin: touchscreen_wake_pin@0 { - pins = "PB13"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -203,7 +181,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -246,7 +224,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index a8e479fe43ca83acf8df79a637b0db864ddb74dc..4b5c91c8e85bff25c135e2d1e1dd2bdf1d19f55d 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -72,8 +72,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -85,14 +83,10 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; ft5406ee8: touchscreen@38 { @@ -109,35 +103,35 @@ vref-supply = <®_ldo2>; status = "okay"; - button@200 { + button-200 { label = "Menu"; linux,code = ; channel = <0>; voltage = <200000>; }; - button@600 { + button-600 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <600000>; }; - button@800 { + button-800 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <800000>; }; - button@1000 { + button-1000 { label = "Home"; linux,code = ; channel = <0>; voltage = <1000000>; }; - button@1200 { + button-1200 { label = "Esc"; linux,code = ; channel = <0>; @@ -146,8 +140,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -160,13 +152,13 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -208,7 +200,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index 2acb89a87d41f2c07a426c56f67396ddff8d4211..13224f5ac166620efc8c5081cab2972f87de0ec2 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -59,7 +59,7 @@ stdout-path = "serial0:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys-polled"; pinctrl-names = "default"; pinctrl-0 = <&key_pins_inet9f>; @@ -67,7 +67,7 @@ #size-cells = <0>; poll-interval = <20>; - button@0 { + left-joystick-left { label = "Left Joystick Left"; linux,code = ; linux,input-type = ; @@ -75,7 +75,7 @@ gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */ }; - button@1 { + left-joystick-right { label = "Left Joystick Right"; linux,code = ; linux,input-type = ; @@ -83,7 +83,7 @@ gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */ }; - button@2 { + left-joystick-up { label = "Left Joystick Up"; linux,code = ; linux,input-type = ; @@ -91,7 +91,7 @@ gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ }; - button@3 { + left-joystick-down { label = "Left Joystick Down"; linux,code = ; linux,input-type = ; @@ -99,7 +99,7 @@ gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ }; - button@4 { + right-joystick-left { label = "Right Joystick Left"; linux,code = ; linux,input-type = ; @@ -107,7 +107,7 @@ gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */ }; - button@5 { + right-joystick-right { label = "Right Joystick Right"; linux,code = ; linux,input-type = ; @@ -115,7 +115,7 @@ gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */ }; - button@6 { + right-joystick-up { label = "Right Joystick Up"; linux,code = ; linux,input-type = ; @@ -123,7 +123,7 @@ gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */ }; - button@7 { + right-joystick-down { label = "Right Joystick Down"; linux,code = ; linux,input-type = ; @@ -131,7 +131,7 @@ gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ }; - button@8 { + dpad-left { label = "DPad Left"; linux,code = ; linux,input-type = ; @@ -139,7 +139,7 @@ gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */ }; - button@9 { + dpad-right { label = "DPad Right"; linux,code = ; linux,input-type = ; @@ -147,7 +147,7 @@ gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */ }; - button@10 { + dpad-up { label = "DPad Up"; linux,code = ; linux,input-type = ; @@ -155,7 +155,7 @@ gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */ }; - button@11 { + dpad-down { label = "DPad Down"; linux,code = ; linux,input-type = ; @@ -163,49 +163,49 @@ gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */ }; - button@12 { + x { label = "Button X"; linux,code = ; gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */ }; - button@13 { + y { label = "Button Y"; linux,code = ; gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */ }; - button@14 { + a { label = "Button A"; linux,code = ; gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */ }; - button@15 { + b { label = "Button B"; linux,code = ; gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */ }; - button@16 { + select { label = "Select Button"; linux,code = ; gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */ }; - button@17 { + start { label = "Start Button"; linux,code = ; gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */ }; - button@18 { + top-left { label = "Top Left Button"; linux,code = ; gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ }; - button@19 { + top-right { label = "Top Right Button"; linux,code = ; gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */ @@ -222,8 +222,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -235,8 +233,6 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; /* Accelerometer */ @@ -249,8 +245,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; ft5406ee8: touchscreen@38 { @@ -267,35 +261,35 @@ vref-supply = <®_ldo2>; status = "okay"; - button@200 { + button-200 { label = "Menu"; linux,code = ; channel = <0>; voltage = <200000>; }; - button@600 { + button-600 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <600000>; }; - button@800 { + button-800 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <800000>; }; - button@1000 { + button-1000 { label = "Home"; linux,code = ; channel = <0>; voltage = <1000000>; }; - button@1200 { + button-1200 { label = "Esc"; linux,code = ; channel = <0>; @@ -304,8 +298,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -318,7 +310,7 @@ }; &pio { - key_pins_inet9f: key_pins@0 { + key_pins_inet9f: key-pins { pins = "PA0", "PA1", "PA3", "PA4", "PA5", "PA6", "PA8", "PA9", "PA11", "PA12", "PA13", @@ -328,13 +320,13 @@ bias-pull-up; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -376,7 +368,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts index 92e3e030ced350baa5698956325b8eb1158e2e97..d22bd79562d87e0ca559060de2745397caaabad0 100644 --- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts +++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts @@ -57,7 +57,7 @@ &emac { pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; + pinctrl-0 = <&emac_pins>; phy = <&phy1>; status = "okay"; }; @@ -67,6 +67,9 @@ }; &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + axp209: pmic@34 { interrupts = <0>; }; @@ -74,19 +77,19 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; @@ -100,7 +103,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -114,7 +117,11 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>; status = "okay"; }; + +&uart0 { + pinctrl-0 = <&uart0_pb_pins>; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index 92b2d4af3d21c667b1b3e32f07131c2171c7f91e..879141ca6027038f81b3975008bf82e9cbdf7e45 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -62,8 +62,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_q5>; green { label = "q5:green:usr"; @@ -74,8 +72,6 @@ reg_emac_3v3: emac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&emac_power_pin_q5>; regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -98,8 +94,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; @@ -109,8 +103,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -125,7 +117,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; @@ -139,8 +131,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -160,18 +150,6 @@ status = "okay"; }; -&pio { - emac_power_pin_q5: emac_power_pin@0 { - pins = "PH19"; - function = "gpio_out"; - }; - - led_pins_q5: led_pins@0 { - pins = "PH20"; - function = "gpio_out"; - }; -}; - ®_usb0_vbus { regulator-boot-on; status = "okay"; @@ -187,7 +165,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 0f927da28ee167961294c7ca21cd58bfc4e07f98..435c551aef0f398375ee42462f4ab590c70f931f 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -61,8 +61,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_marsboard>; red1 { label = "marsboard:red1:usr"; @@ -107,27 +105,19 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -140,8 +130,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -162,12 +150,7 @@ }; &pio { - led_pins_marsboard: led_pins@0 { - pins = "PB5", "PB6", "PB7", "PB8"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -184,14 +167,14 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index a5ed9e4e22c611bffa1842a6140665ada70b1db3..1b639e5f91720a73c0c921e37c72f6fbac19db05 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -70,8 +70,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -86,18 +84,16 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; -&ir0_rx_pins_a { +&ir0_rx_pins { /* The ir receiver is not always populated */ bias-pull-up; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -132,7 +128,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index 81db6824a2c79c7441f1aa335abde6f84b45e341..7198b34e2e5082cf41679f9bd3f3483539b947a0 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -71,8 +71,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -88,23 +86,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PH4"; - function = "gpio_in"; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PH5"; - function = "gpio_in"; - }; - - usb2_vbus_pin_mk802: usb2_vbus_pin@0 { - pins = "PH12"; - function = "gpio_out"; - }; -}; - ®_usb0_vbus { status = "okay"; }; @@ -114,14 +95,13 @@ }; ®_usb2_vbus { - pinctrl-0 = <&usb2_vbus_pin_mk802>; gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; @@ -131,8 +111,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts index e74a881fd9a7a56d399742e8116245163810d21e..e460da2eb13961cc14398519c6c91cb2a8a50263 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts @@ -67,8 +67,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -82,8 +80,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -105,7 +101,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 462412ee903c54a0bb0c758d85ae2daad96069e9..49247fbe6acd5d73a19d07ceec73be50c1d973a4 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -58,6 +58,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -89,6 +100,10 @@ cooling-max-level = <2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -98,8 +113,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; @@ -108,9 +121,17 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -124,8 +145,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -144,8 +163,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -166,24 +183,19 @@ }; &pio { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - pins = "PC3"; - function = "gpio_out"; - }; - - led_pins_olinuxinolime: led_pins@0 { + led_pins_olinuxinolime: led-pin { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -191,7 +203,6 @@ }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -210,7 +221,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 84f55e76df0c211568c5c0975428235dc7f08a4a..6e140547b638f9a45bf63fbe1b8ee5c8387b962a 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -62,8 +62,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_pcduino>; tx { label = "pcduino:green:tx"; @@ -76,26 +74,24 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&key_pins_pcduino>; #address-cells = <1>; #size-cells = <0>; - button@0 { + back { label = "Key Back"; linux,code = ; gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; }; - button@1 { + home { label = "Key Home"; linux,code = ; gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; }; - button@2 { + menu { label = "Key Menu"; linux,code = ; gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; @@ -116,8 +112,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; @@ -127,8 +121,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -146,8 +138,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -168,17 +158,7 @@ }; &pio { - led_pins_pcduino: led_pins@0 { - pins = "PH15", "PH16"; - function = "gpio_out"; - }; - - key_pins_pcduino: key_pins@0 { - pins = "PH17", "PH18", "PH19"; - function = "gpio_in"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -214,7 +194,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts index 811d00ee2aded649d4aa92674f7da34b0d61e022..bc4f128965ed52e06aa95967ec094b4f2bcd6212 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts @@ -55,16 +55,7 @@ compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10"; }; -&pio { - usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 { - pins = "PD2"; - function = "gpio_out"; - }; -}; - ®_usb2_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin_pcduino2>; gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index c0f8c88b5a7d8ac064a02fa4097f225532bf1966..5081303f79e739e7bb3f865771ca36fabda8b07f 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -58,8 +58,6 @@ backlight: backlight { compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_protab>; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; @@ -72,8 +70,6 @@ }; &codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; @@ -87,8 +83,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -100,20 +94,14 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; /* pull-ups and devices require AXP209 LDO3 */ status = "failed"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; - pixcir_ts@5c { - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_pins>; + touchscreen@5c { compatible = "pixcir,pixcir_tangoc"; reg = <0x5c>; interrupt-parent = <&pio>; @@ -132,14 +120,14 @@ vref-supply = <®_ldo2>; status = "okay"; - button@400 { + button-400 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <400000>; }; - button@800 { + button-800 { label = "Volume Down"; linux,code = ; channel = <0>; @@ -148,8 +136,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -162,28 +148,13 @@ }; &pio { - bl_en_pin_protab: bl_en_pin@0 { - pins = "PH7"; - function = "gpio_out"; - }; - - codec_pa_pin: codec_pa_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; - - touchscreen_pins: touchscreen_pins@0 { - pins = "PA5", "PB13"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -192,7 +163,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -231,7 +202,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 41c2579143fd6b7beb9f9e665e21dd0fd48b4409..b91300d49a31081269789a6e7437e6d707a8a6f4 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -41,14 +41,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include - -#include #include +#include +#include / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&intc>; aliases { @@ -60,46 +60,48 @@ #size-cells = <1>; ranges; - framebuffer@0 { + framebuffer-lcd0-hdmi { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&de_be0_clk>, - <&tcon0_ch1_clk>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; - framebuffer@1 { + framebuffer-fe0-lcd0-hdmi { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&ahb_gates 46>, - <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>, - <&dram_gates 25>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>, + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; - framebuffer@2 { + framebuffer-fe0-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0"; - clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>, - <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>, - <&dram_gates 25>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, + <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_TCON0_CH0>, + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; - framebuffer@3 { + framebuffer-fe0-lcd0-tve0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; - clocks = <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, <&ahb_gates 46>, - <&de_be0_clk>, <&de_fe0_clk>, - <&tcon0_ch1_clk>, <&dram_gates 5>, - <&dram_gates 25>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>, + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; }; @@ -111,7 +113,7 @@ device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; - clocks = <&cpu>; + clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ @@ -127,7 +129,7 @@ }; thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; @@ -141,14 +143,14 @@ }; trips { - cpu_alert0: cpu_alert0 { + cpu_alert0: cpu-alert0 { /* milliCelsius */ temperature = <850000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu_crit { + cpu_crit: cpu-crit { /* milliCelsius */ temperature = <100000>; hysteresis = <2000>; @@ -158,532 +160,46 @@ }; }; - memory { - reg = <0x40000000 0x80000000>; - }; - clocks { #address-cells = <1>; #size-cells = <1>; ranges; - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc3M: osc3M_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc3M"; - }; - - osc32k: clk@0 { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; clock-output-names = "osc32k"; }; + }; - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll2: clk@01c20008 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll2-clk"; - reg = <0x01c20008 0x8>; - clocks = <&osc24M>; - clock-output-names = "pll2-1x", "pll2-2x", - "pll2-4x", "pll2-8x"; - }; - - pll3: clk@01c20010 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20010 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll3"; - }; - - pll3x2: pll3x2_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll3>; - clock-output-names = "pll3-2x"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - pll7: clk@01c20030 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20030 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll7"; - }; - - pll7x2: pll7x2_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll7>; - clock-output-names = "pll7-2x"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-axi-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-indices = <0>; - clock-output-names = "axi_dram"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>; - clock-output-names = "ahb"; - }; - - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <3>, - <4>, <5>, <6>, - <7>, <8>, <9>, - <10>, <11>, <12>, - <13>, <14>, <16>, - <17>, <18>, <20>, - <21>, <22>, <23>, - <24>, <25>, <26>, - <32>, <33>, <34>, - <35>, <36>, <37>, - <40>, <41>, <43>, - <44>, <45>, - <46>, <47>, - <50>, <52>; - clock-output-names = "ahb_usb0", "ahb_ehci0", - "ahb_ohci0", "ahb_ehci1", - "ahb_ohci1", "ahb_ss", "ahb_dma", - "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_mmc3", "ahb_ms", - "ahb_nand", "ahb_sdram", "ahb_ace", - "ahb_emac", "ahb_ts", "ahb_spi0", - "ahb_spi1", "ahb_spi2", "ahb_spi3", - "ahb_pata", "ahb_sata", "ahb_gps", - "ahb_ve", "ahb_tvd", "ahb_tve0", - "ahb_tve1", "ahb_lcd0", "ahb_lcd1", - "ahb_csi0", "ahb_csi1", "ahb_hdmi", - "ahb_de_be0", "ahb_de_be1", - "ahb_de_fe0", "ahb_de_fe1", - "ahb_mp", "ahb_mali400"; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-apb0-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <1>, - <2>, <3>, - <5>, <6>, - <7>, <10>; - clock-output-names = "apb0_codec", "apb0_spdif", - "apb0_ac97", "apb0_iis", - "apb0_pio", "apb0_ir0", - "apb0_ir1", "apb0_keypad"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <4>, - <5>, <6>, - <7>, <16>, - <17>, <18>, - <19>, <20>, - <21>, <22>, - <23>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_can", - "apb1_scr", "apb1_ps20", - "apb1_ps21", "apb1_uart0", - "apb1_uart1", "apb1_uart2", - "apb1_uart3", "apb1_uart4", - "apb1_uart5", "apb1_uart6", - "apb1_uart7"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - mmc3_clk: clk@01c20094 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20094 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc3", - "mmc3_output", - "mmc3_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - pata_clk: clk@01c200ac { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200ac 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "pata"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - ir1_clk: clk@01c200b4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir1"; - }; - - spdif_clk: clk@01c200c0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200c0 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "spdif"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_ohci1", - "usb_phy"; - }; - - spi3_clk: clk@01c200d4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200d4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi3"; - }; - - dram_gates: clk@01c20100 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-dram-gates-clk"; - reg = <0x01c20100 0x4>; - clocks = <&pll5 0>; - clock-indices = <0>, - <1>, <2>, - <3>, - <4>, - <5>, <6>, - <15>, - <24>, <25>, - <26>, <27>, - <28>, <29>; - clock-output-names = "dram_ve", - "dram_csi0", "dram_csi1", - "dram_ts", - "dram_tvd", - "dram_tve0", "dram_tve1", - "dram_output", - "dram_de_fe1", "dram_de_fe0", - "dram_de_be0", "dram_de_be1", - "dram_de_mp", "dram_ace"; - }; - - de_be0_clk: clk@01c20104 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20104 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be0"; - }; - - de_be1_clk: clk@01c20108 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20108 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be1"; - }; - - de_fe0_clk: clk@01c2010c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c2010c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe0"; - }; - - de_fe1_clk: clk@01c20110 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20110 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe1"; - }; - - - tcon0_ch0_clk: clk@01c20118 { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c20118 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon0-ch0-sclk"; - - }; - - tcon1_ch0_clk: clk@01c2011c { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c2011c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon1-ch0-sclk"; - - }; - - tcon0_ch1_clk: clk@01c2012c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c2012c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon0-ch1-sclk"; - - }; - - tcon1_ch1_clk: clk@01c20130 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c20130 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon1-ch1-sclk"; - - }; - - ve_clk: clk@01c2013c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-ve-clk"; - reg = <0x01c2013c 0x4>; - clocks = <&pll4>; - clock-output-names = "ve"; - }; - - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; - reg = <0x01c20140 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "codec"; - }; + de: display-engine { + compatible = "allwinner,sun4i-a10-display-engine"; + allwinner,pipelines = <&fe0>, <&fe1>; + status = "disabled"; }; - soc@01c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sram-controller@01c00000 { + sram-controller@1c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; ranges; - sram_a: sram@00000000 { + sram_a: sram@0 { compatible = "mmio-sram"; reg = <0x00000000 0xc000>; #address-cells = <1>; @@ -697,14 +213,14 @@ }; }; - sram_d: sram@00010000 { + sram_d: sram@10000 { compatible = "mmio-sram"; reg = <0x00010000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00010000 0x1000>; - otg_sram: sram-section@0000 { + otg_sram: sram-section@0 { compatible = "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; @@ -712,19 +228,19 @@ }; }; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; - clocks = <&ahb_gates 6>; + clocks = <&ccu CLK_AHB_DMA>; #dma-cells = <2>; }; - nfc: nand@01c03000 { + nfc: nand@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; - clocks = <&ahb_gates 13>, <&nand_clk>; + clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 3>; dma-names = "rxtx"; @@ -733,11 +249,11 @@ #size-cells = <0>; }; - spi0: spi@01c05000 { + spi0: spi@1c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 27>, <&dma SUN4I_DMA_DEDICATED 26>; @@ -747,30 +263,34 @@ #size-cells = <0>; }; - spi1: spi@01c06000 { + spi1: spi@1c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 9>, <&dma SUN4I_DMA_DEDICATED 8>; dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - emac: ethernet@01c0b000 { + emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; - clocks = <&ahb_gates 17>; + clocks = <&ccu CLK_AHB_EMAC>; allwinner,sram = <&emac_sram 1>; + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins>; status = "disabled"; }; - mdio: mdio@01c0b080 { + mdio: mdio@1c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; @@ -778,78 +298,154 @@ #size-cells = <0>; }; - mmc0: mmc@01c0f000 { + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun4i-a10-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&ccu RST_TCON0>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD0>, + <&ccu CLK_TCON0_CH0>, + <&ccu CLK_TCON0_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon0-pixel-clock"; + dmas = <&dma SUN4I_DMA_DEDICATED 14>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + + tcon0_in_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon0_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + tcon1: lcd-controller@1c0d000 { + compatible = "allwinner,sun4i-a10-tcon"; + reg = <0x01c0d000 0x1000>; + interrupts = <45>; + resets = <&ccu RST_TCON1>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD1>, + <&ccu CLK_TCON1_CH0>, + <&ccu CLK_TCON1_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon1-pixel-clock"; + dmas = <&dma SUN4I_DMA_DEDICATED 15>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon1_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon1>; + }; + + tcon1_in_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + mmc0: mmc@1c0f000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; interrupts = <32>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; interrupts = <33>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; interrupts = <34>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - mmc3: mmc@01c12000 { + mmc3: mmc@1c12000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&ahb_gates 11>, - <&mmc3_clk 0>, - <&mmc3_clk 1>, - <&mmc3_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>; + clock-names = "ahb", "mmc"; interrupts = <35>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - usb_otg: usb@01c13000 { + usb_otg: usb@1c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; + clocks = <&ccu CLK_AHB_OTG>; interrupts = <38>; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -859,51 +455,95 @@ status = "disabled"; }; - usbphy: phy@01c13400 { + usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; - clocks = <&usb_clk 8>; + clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; status = "disabled"; }; - ehci0: usb@01c14000 { + ehci0: usb@1c14000 { compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; - clocks = <&ahb_gates 1>; + clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - ohci0: usb@01c14400 { + ohci0: usb@1c14400 { compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <64>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; + clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = <86>; - clocks = <&ahb_gates 5>, <&ss_clk>; + clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; clock-names = "ahb", "mod"; }; - spi2: spi@01c17000 { + hdmi: hdmi@1c16000 { + compatible = "allwinner,sun4i-a10-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = <58>; + clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, + <&ccu 9>, + <&ccu 18>; + clock-names = "ahb", "mod", "pll-0", "pll-1"; + dmas = <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_DEDICATED 24>; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + + hdmi_in_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + spi2: spi@1c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 29>, <&dma SUN4I_DMA_DEDICATED 28>; @@ -913,39 +553,39 @@ #size-cells = <0>; }; - ahci: sata@01c18000 { + ahci: sata@1c18000 { compatible = "allwinner,sun4i-a10-ahci"; reg = <0x01c18000 0x1000>; interrupts = <56>; - clocks = <&pll6 0>, <&ahb_gates 25>; + clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>; status = "disabled"; }; - ehci1: usb@01c1c000 { + ehci1: usb@1c1c000 { compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; interrupts = <40>; - clocks = <&ahb_gates 3>; + clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; }; - ohci1: usb@01c1c400 { + ohci1: usb@1c1c400 { compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = <65>; - clocks = <&usb_clk 7>, <&ahb_gates 4>; + clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; }; - spi3: spi@01c1f000 { + spi3: spi@1c1f000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c1f000 0x1000>; interrupts = <50>; - clocks = <&ahb_gates 23>, <&spi3_clk>; + clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 31>, <&dma SUN4I_DMA_DEDICATED 30>; @@ -955,30 +595,39 @@ #size-cells = <0>; }; - intc: interrupt-controller@01c20400 { + ccu: clock@1c20000 { + compatible = "allwinner,sun4i-a10-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + intc: interrupt-controller@1c20400 { compatible = "allwinner,sun4i-a10-ic"; reg = <0x01c20400 0x400>; interrupt-controller; #interrupt-cells = <1>; }; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { compatible = "allwinner,sun4i-a10-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <28>; - clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; - can0_pins_a: can0@0 { + can0_ph_pins: can0-ph-pins { pins = "PH20", "PH21"; function = "can"; }; - emac_pins_a: emac0@0 { + emac_pins: emac0-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -987,42 +636,42 @@ function = "emac"; }; - i2c0_pins_a: i2c0@0 { + i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; - i2c1_pins_a: i2c1@0 { + i2c1_pins: i2c1-pins { pins = "PB18", "PB19"; function = "i2c1"; }; - i2c2_pins_a: i2c2@0 { + i2c2_pins: i2c2-pins { pins = "PB20", "PB21"; function = "i2c2"; }; - ir0_rx_pins_a: ir0@0 { + ir0_rx_pins: ir0-rx-pin { pins = "PB4"; function = "ir0"; }; - ir0_tx_pins_a: ir0@1 { + ir0_tx_pins: ir0-tx-pin { pins = "PB3"; function = "ir0"; }; - ir1_rx_pins_a: ir1@0 { + ir1_rx_pins: ir1-rx-pin { pins = "PB23"; function = "ir1"; }; - ir1_tx_pins_a: ir1@1 { + ir1_tx_pins: ir1-tx-pin { pins = "PB22"; function = "ir1"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -1030,107 +679,107 @@ bias-pull-up; }; - ps20_pins_a: ps20@0 { + ps2_ch0_pins: ps2-ch0-pins { pins = "PI20", "PI21"; function = "ps2"; }; - ps21_pins_a: ps21@0 { + ps2_ch1_ph_pins: ps2-ch1-ph-pins { pins = "PH12", "PH13"; function = "ps2"; }; - pwm0_pins_a: pwm0@0 { + pwm0_pin: pwm0-pin { pins = "PB2"; function = "pwm"; }; - pwm1_pins_a: pwm1@0 { + pwm1_pin: pwm1-pin { pins = "PI3"; function = "pwm"; }; - spdif_tx_pins_a: spdif@0 { + spdif_tx_pin: spdif-tx-pin { pins = "PB13"; function = "spdif"; bias-pull-up; }; - spi0_pins_a: spi0@0 { + spi0_pi_pins: spi0-pi-pins { pins = "PI11", "PI12", "PI13"; function = "spi0"; }; - spi0_cs0_pins_a: spi0_cs0@0 { + spi0_cs0_pi_pin: spi0-cs0-pi-pin { pins = "PI10"; function = "spi0"; }; - spi1_pins_a: spi1@0 { + spi1_pins: spi1-pins { pins = "PI17", "PI18", "PI19"; function = "spi1"; }; - spi1_cs0_pins_a: spi1_cs0@0 { + spi1_cs0_pin: spi1-cs0-pin { pins = "PI16"; function = "spi1"; }; - spi2_pins_a: spi2@0 { - pins = "PC20", "PC21", "PC22"; + spi2_pb_pins: spi2-pb-pins { + pins = "PB15", "PB16", "PB17"; function = "spi2"; }; - spi2_pins_b: spi2@1 { - pins = "PB15", "PB16", "PB17"; + spi2_pc_pins: spi2-pc-pins { + pins = "PC20", "PC21", "PC22"; function = "spi2"; }; - spi2_cs0_pins_a: spi2_cs0@0 { - pins = "PC19"; + spi2_cs0_pb_pin: spi2-cs0-pb-pin { + pins = "PB14"; function = "spi2"; }; - spi2_cs0_pins_b: spi2_cs0@1 { - pins = "PB14"; + spi2_cs0_pc_pins: spi2-cs0-pc-pin { + pins = "PC19"; function = "spi2"; }; - uart0_pins_a: uart0@0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; - uart0_pins_b: uart0@1 { + uart0_pf_pins: uart0-pf-pins { pins = "PF2", "PF4"; function = "uart0"; }; - uart1_pins_a: uart1@0 { + uart1_pins: uart1-pins { pins = "PA10", "PA11"; function = "uart1"; }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; interrupts = <22>; clocks = <&osc24M>; }; - wdt: watchdog@01c20c90 { + wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; }; - rtc: rtc@01c20d00 { + rtc: rtc@1c20d00 { compatible = "allwinner,sun4i-a10-rtc"; reg = <0x01c20d00 0x20>; interrupts = <24>; }; - pwm: pwm@01c20e00 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun4i-a10-pwm"; reg = <0x01c20e00 0xc>; clocks = <&osc24M>; @@ -1138,12 +787,12 @@ status = "disabled"; }; - spdif: spdif@01c21000 { + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x400>; interrupts = <13>; - clocks = <&apb0_gates 1>, <&spdif_clk>; + clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; clock-names = "apb", "spdif"; dmas = <&dma SUN4I_DMA_NORMAL 2>, <&dma SUN4I_DMA_NORMAL 2>; @@ -1151,37 +800,50 @@ status = "disabled"; }; - ir0: ir@01c21800 { + ir0: ir@1c21800 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 6>, <&ir0_clk>; + clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>; clock-names = "apb", "ir"; interrupts = <5>; reg = <0x01c21800 0x40>; status = "disabled"; }; - ir1: ir@01c21c00 { + ir1: ir@1c21c00 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 7>, <&ir1_clk>; + clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>; clock-names = "apb", "ir"; interrupts = <6>; reg = <0x01c21c00 0x40>; status = "disabled"; }; - lradc: lradc@01c22800 { + i2s0: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <16>; + clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 3>, + <&dma SUN4I_DMA_NORMAL 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = <31>; status = "disabled"; }; - codec: codec@01c22c00 { + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-codec"; reg = <0x01c22c00 0x40>; interrupts = <30>; - clocks = <&apb0_gates 0>, <&codec_clk>; + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; clock-names = "apb", "codec"; dmas = <&dma SUN4I_DMA_NORMAL 19>, <&dma SUN4I_DMA_NORMAL 19>; @@ -1189,150 +851,316 @@ status = "disabled"; }; - sid: eeprom@01c23800 { + sid: eeprom@1c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; }; - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; #thermal-sensor-cells = <0>; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <1>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 16>; + clocks = <&ccu CLK_APB1_UART0>; status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; + clocks = <&ccu CLK_APB1_UART1>; status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; + clocks = <&ccu CLK_APB1_UART2>; status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = <4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; + clocks = <&ccu CLK_APB1_UART3>; status = "disabled"; }; - uart4: serial@01c29000 { + uart4: serial@1c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = <17>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 20>; + clocks = <&ccu CLK_APB1_UART4>; status = "disabled"; }; - uart5: serial@01c29400 { + uart5: serial@1c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; interrupts = <18>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 21>; + clocks = <&ccu CLK_APB1_UART5>; status = "disabled"; }; - uart6: serial@01c29800 { + uart6: serial@1c29800 { compatible = "snps,dw-apb-uart"; reg = <0x01c29800 0x400>; interrupts = <19>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 22>; + clocks = <&ccu CLK_APB1_UART6>; status = "disabled"; }; - uart7: serial@01c29c00 { + uart7: serial@1c29c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c29c00 0x400>; interrupts = <20>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 23>; + clocks = <&ccu CLK_APB1_UART7>; status = "disabled"; }; - ps20: ps2@01c2a000 { + ps20: ps2@1c2a000 { compatible = "allwinner,sun4i-a10-ps2"; reg = <0x01c2a000 0x400>; interrupts = <62>; - clocks = <&apb1_gates 6>; + clocks = <&ccu CLK_APB1_PS20>; status = "disabled"; }; - ps21: ps2@01c2a400 { + ps21: ps2@1c2a400 { compatible = "allwinner,sun4i-a10-ps2"; reg = <0x01c2a400 0x400>; interrupts = <63>; - clocks = <&apb1_gates 7>; + clocks = <&ccu CLK_APB1_PS21>; status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; - clocks = <&apb1_gates 0>; + clocks = <&ccu CLK_APB1_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; - clocks = <&apb1_gates 1>; + clocks = <&ccu CLK_APB1_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; - clocks = <&apb1_gates 2>; + clocks = <&ccu CLK_APB1_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - can0: can@01c2bc00 { + can0: can@1c2bc00 { compatible = "allwinner,sun4i-a10-can"; reg = <0x01c2bc00 0x400>; interrupts = <26>; - clocks = <&apb1_gates 4>; + clocks = <&ccu CLK_APB1_CAN>; status = "disabled"; }; + + fe0: display-frontend@1e00000 { + compatible = "allwinner,sun4i-a10-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>, + <&ccu CLK_DRAM_DE_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + + fe0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe0>; + }; + }; + }; + }; + + fe1: display-frontend@1e20000 { + compatible = "allwinner,sun4i-a10-display-frontend"; + reg = <0x01e20000 0x20000>; + interrupts = <48>; + clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>, + <&ccu CLK_DRAM_DE_FE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe1_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe1>; + }; + + fe1_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe1>; + }; + }; + }; + }; + + be1: display-backend@1e40000 { + compatible = "allwinner,sun4i-a10-display-backend"; + reg = <0x01e40000 0x10000>; + interrupts = <48>; + clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>, + <&ccu CLK_DRAM_DE_BE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be1_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be1>; + }; + + be1_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be1>; + }; + }; + + be1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon1_in_be0>; + }; + + be1_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_be1>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + compatible = "allwinner,sun4i-a10-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = <47>; + clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_DRAM_DE_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + + be0_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + + be0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_be0>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 18f25c5e75aebc3584699ec661b07fde5610f17c..6ae4d95e230e58a468c908d85c2cfaf8d87894a0 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -76,8 +76,8 @@ allwinner,pipelines = <&fe0>; }; - soc@01c00000 { - hdmi: hdmi@01c16000 { + soc@1c00000 { + hdmi: hdmi@1c16000 { compatible = "allwinner,sun5i-a10s-hdmi"; reg = <0x01c16000 0x1000>; interrupts = <58>; @@ -111,7 +111,7 @@ }; }; - pwm: pwm@01c20e00 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; clocks = <&ccu CLK_HOSC>; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 6436bad94404d21e1edd012992d2983053ae7428..4e830f5cb7f1ddb085710e56f659ffc74926bdc7 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -88,8 +88,8 @@ allwinner,pipelines = <&fe0>; }; - soc@01c00000 { - pwm: pwm@01c20e00 { + soc@1c00000 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a13-pwm"; reg = <0x01c20e00 0xc>; clocks = <&ccu CLK_HOSC>; diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi index 3eb56cad0ceaa2b44fc218c66103502b25766615..ef0b7446a99d1113e9baa797d689c4950177743d 100644 --- a/arch/arm/boot/dts/sun5i-gr8.dtsi +++ b/arch/arm/boot/dts/sun5i-gr8.dtsi @@ -54,8 +54,8 @@ allwinner,pipelines = <&fe0>; }; - soc@01c00000 { - pwm: pwm@01c20e00 { + soc@1c00000 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; clocks = <&ccu CLK_HOSC>; @@ -63,7 +63,7 @@ status = "disabled"; }; - spdif: spdif@01c21000 { + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x400>; @@ -76,7 +76,7 @@ status = "disabled"; }; - i2s0: i2s@01c22400 { + i2s0: i2s@1c22400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22400 0x400>; diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index 8a4d2277826f03fccdb52b4e1cf4ecbd5f511fa0..49229b3d5492534c3938d77631ac2bff27de9d39 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -110,6 +110,14 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + &lradc { vref-supply = <®_ldo2>; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 98cc00341b005486a800394797696ea4675a060a..07f2248ed5f8b5931978bd5c3fee53c58cc6ec38 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -93,7 +93,7 @@ #size-cells = <1>; ranges; - osc24M: clk@01c20050 { + osc24M: clk@1c20050 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -108,20 +108,20 @@ }; }; - soc@01c00000 { + soc@1c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sram-controller@01c00000 { + sram-controller@1c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; ranges; - sram_a: sram@00000000 { + sram_a: sram@0 { compatible = "mmio-sram"; reg = <0x00000000 0xc000>; #address-cells = <1>; @@ -135,14 +135,14 @@ status = "disabled"; }; - sram_d: sram@00010000 { + sram_d: sram@10000 { compatible = "mmio-sram"; reg = <0x00010000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00010000 0x1000>; - otg_sram: sram-section@0000 { + otg_sram: sram-section@0 { compatible = "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; @@ -150,7 +150,7 @@ }; }; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; @@ -158,7 +158,7 @@ #dma-cells = <2>; }; - nfc: nand@01c03000 { + nfc: nand@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; @@ -171,7 +171,7 @@ #size-cells = <0>; }; - spi0: spi@01c05000 { + spi0: spi@1c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; @@ -185,7 +185,7 @@ #size-cells = <0>; }; - spi1: spi@01c06000 { + spi1: spi@1c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; @@ -199,7 +199,7 @@ #size-cells = <0>; }; - tve0: tv-encoder@01c0a000 { + tve0: tv-encoder@1c0a000 { compatible = "allwinner,sun4i-a10-tv-encoder"; reg = <0x01c0a000 0x1000>; clocks = <&ccu CLK_AHB_TVE>; @@ -217,7 +217,7 @@ }; }; - emac: ethernet@01c0b000 { + emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; @@ -226,7 +226,7 @@ status = "disabled"; }; - mdio: mdio@01c0b080 { + mdio: mdio@1c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; @@ -234,7 +234,7 @@ #size-cells = <0>; }; - tcon0: lcd-controller@01c0c000 { + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun5i-a13-tcon"; reg = <0x01c0c000 0x1000>; interrupts = <44>; @@ -278,7 +278,7 @@ }; }; - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; @@ -289,7 +289,7 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; @@ -300,7 +300,7 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; @@ -311,7 +311,7 @@ #size-cells = <0>; }; - usb_otg: usb@01c13000 { + usb_otg: usb@1c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; clocks = <&ccu CLK_AHB_OTG>; @@ -324,7 +324,7 @@ status = "disabled"; }; - usbphy: phy@01c13400 { + usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; reg = <0x01c13400 0x10 0x01c14800 0x4>; @@ -336,7 +336,7 @@ status = "disabled"; }; - ehci0: usb@01c14000 { + ehci0: usb@1c14000 { compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; @@ -346,7 +346,7 @@ status = "disabled"; }; - ohci0: usb@01c14400 { + ohci0: usb@1c14400 { compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <40>; @@ -356,7 +356,7 @@ status = "disabled"; }; - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun5i-a13-crypto", "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; @@ -365,7 +365,7 @@ clock-names = "ahb", "mod"; }; - spi2: spi@01c17000 { + spi2: spi@1c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <12>; @@ -379,7 +379,7 @@ #size-cells = <0>; }; - ccu: clock@01c20000 { + ccu: clock@1c20000 { reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; clock-names = "hosc", "losc"; @@ -387,14 +387,14 @@ #reset-cells = <1>; }; - intc: interrupt-controller@01c20400 { + intc: interrupt-controller@1c20400 { compatible = "allwinner,sun4i-a10-ic"; reg = <0x01c20400 0x400>; interrupt-controller; #interrupt-cells = <1>; }; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { reg = <0x01c20800 0x400>; interrupts = <28>; clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; @@ -538,19 +538,19 @@ }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; interrupts = <22>; clocks = <&ccu CLK_HOSC>; }; - wdt: watchdog@01c20c90 { + wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; }; - ir0: ir@01c21800 { + ir0: ir@1c21800 { compatible = "allwinner,sun4i-a10-ir"; clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>; clock-names = "apb", "ir"; @@ -559,14 +559,14 @@ status = "disabled"; }; - lradc: lradc@01c22800 { + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = <31>; status = "disabled"; }; - codec: codec@01c22c00 { + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-codec"; reg = <0x01c22c00 0x40>; @@ -579,19 +579,19 @@ status = "disabled"; }; - sid: eeprom@01c23800 { + sid: eeprom@1c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; }; - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; #thermal-sensor-cells = <0>; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <1>; @@ -601,7 +601,7 @@ status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <2>; @@ -611,7 +611,7 @@ status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = <3>; @@ -621,7 +621,7 @@ status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = <4>; @@ -631,7 +631,7 @@ status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; @@ -641,7 +641,7 @@ #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; @@ -651,7 +651,7 @@ #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; @@ -661,14 +661,14 @@ #size-cells = <0>; }; - timer@01c60000 { + timer@1c60000 { compatible = "allwinner,sun5i-a13-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <82>, <83>; clocks = <&ccu CLK_AHB_HSTIMER>; }; - fe0: display-frontend@01e00000 { + fe0: display-frontend@1e00000 { compatible = "allwinner,sun5i-a13-display-frontend"; reg = <0x01e00000 0x20000>; interrupts = <47>; @@ -696,7 +696,7 @@ }; }; - be0: display-backend@01e60000 { + be0: display-backend@1e60000 { compatible = "allwinner,sun5i-a13-display-backend"; reg = <0x01e60000 0x10000>; interrupts = <47>; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 9ecb5f0b3f83e889b2536dd7531a7c45e1fbc4d7..19e382a11297e1f753c250c20e35de3784e0aaea 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -62,6 +62,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + vga-connector { compatible = "vga-connector"; @@ -162,6 +173,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index eef072a21accaed0c29d6407d076331ad579a987..8bfa12b548e0a2acf8f285505cd3699e27519e86 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -221,7 +221,7 @@ clock-output-names = "gmac_int_tx"; }; - gmac_tx_clk: clk@01c200d0 { + gmac_tx_clk: clk@1c200d0 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-gmac-clk"; reg = <0x01c200d0 0x4>; @@ -236,13 +236,13 @@ status = "disabled"; }; - soc@01c00000 { + soc@1c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun6i-a31-dma"; reg = <0x01c02000 0x1000>; interrupts = ; @@ -251,7 +251,7 @@ #dma-cells = <1>; }; - tcon0: lcd-controller@01c0c000 { + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun6i-a31-tcon"; reg = <0x01c0c000 0x1000>; interrupts = ; @@ -278,17 +278,28 @@ reg = <0>; remote-endpoint = <&drc0_out_tcon0>; }; + + tcon0_in_drc1: endpoint@1 { + reg = <1>; + remote-endpoint = <&drc1_out_tcon0>; + }; }; tcon0_out: port@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon0_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; }; }; }; - tcon1: lcd-controller@01c0d000 { + tcon1: lcd-controller@1c0d000 { compatible = "allwinner,sun6i-a31-tcon"; reg = <0x01c0d000 0x1000>; interrupts = ; @@ -311,6 +322,11 @@ #size-cells = <0>; reg = <0>; + tcon1_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon1>; + }; + tcon1_in_drc1: endpoint@1 { reg = <1>; remote-endpoint = <&drc1_out_tcon1>; @@ -321,11 +337,17 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + allwinner,tcon-channel = <1>; + }; }; }; }; - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_AHB1_MMC0>, @@ -344,7 +366,7 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_AHB1_MMC1>, @@ -363,7 +385,7 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ccu CLK_AHB1_MMC2>, @@ -382,7 +404,7 @@ #size-cells = <0>; }; - mmc3: mmc@01c12000 { + mmc3: mmc@1c12000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c12000 0x1000>; clocks = <&ccu CLK_AHB1_MMC3>, @@ -401,7 +423,50 @@ #size-cells = <0>; }; - usb_otg: usb@01c19000 { + hdmi: hdmi@1c16000 { + compatible = "allwinner,sun6i-a31-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>, + <&ccu CLK_HDMI_DDC>, + <&ccu 7>, + <&ccu 13>; + clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1"; + resets = <&ccu RST_AHB1_HDMI>; + reset-names = "ahb"; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + dmas = <&dma 13>, <&dma 13>, <&dma 14>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + + hdmi_in_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + usb_otg: usb@1c19000 { compatible = "allwinner,sun6i-a31-musb"; reg = <0x01c19000 0x0400>; clocks = <&ccu CLK_AHB1_OTG>; @@ -414,7 +479,7 @@ status = "disabled"; }; - usbphy: phy@01c19400 { + usbphy: phy@1c19400 { compatible = "allwinner,sun6i-a31-usb-phy"; reg = <0x01c19400 0x10>, <0x01c1a800 0x4>, @@ -438,7 +503,7 @@ #phy-cells = <1>; }; - ehci0: usb@01c1a000 { + ehci0: usb@1c1a000 { compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; interrupts = ; @@ -449,7 +514,7 @@ status = "disabled"; }; - ohci0: usb@01c1a400 { + ohci0: usb@1c1a400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1a400 0x100>; interrupts = ; @@ -460,7 +525,7 @@ status = "disabled"; }; - ehci1: usb@01c1b000 { + ehci1: usb@1c1b000 { compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; interrupts = ; @@ -471,7 +536,7 @@ status = "disabled"; }; - ohci1: usb@01c1b400 { + ohci1: usb@1c1b400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1b400 0x100>; interrupts = ; @@ -482,7 +547,7 @@ status = "disabled"; }; - ohci2: usb@01c1c400 { + ohci2: usb@1c1c400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = ; @@ -491,7 +556,7 @@ status = "disabled"; }; - ccu: clock@01c20000 { + ccu: clock@1c20000 { compatible = "allwinner,sun6i-a31-ccu"; reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; @@ -500,7 +565,7 @@ #reset-cells = <1>; }; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { compatible = "allwinner,sun6i-a31-pinctrl"; reg = <0x01c20800 0x400>; interrupts = , @@ -633,7 +698,7 @@ }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = , @@ -644,12 +709,12 @@ clocks = <&osc24M>; }; - wdt1: watchdog@01c20ca0 { + wdt1: watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; }; - spdif: spdif@01c21000 { + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun6i-a31-spdif"; reg = <0x01c21000 0x400>; @@ -662,21 +727,47 @@ status = "disabled"; }; - lradc: lradc@01c22800 { + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22000 0x400>; + interrupts = ; + clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>; + resets = <&ccu RST_APB1_DAUDIO0>; + clock-names = "apb", "mod"; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s1: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22400 0x400>; + interrupts = ; + clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>; + resets = <&ccu RST_APB1_DAUDIO1>; + clock-names = "apb", "mod"; + dmas = <&dma 4>, <&dma 4>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = ; status = "disabled"; }; - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun6i-a31-ts"; reg = <0x01c25000 0x100>; interrupts = ; #thermal-sensor-cells = <0>; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; @@ -689,7 +780,7 @@ status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; @@ -702,7 +793,7 @@ status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; @@ -715,7 +806,7 @@ status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = ; @@ -728,7 +819,7 @@ status = "disabled"; }; - uart4: serial@01c29000 { + uart4: serial@1c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = ; @@ -741,7 +832,7 @@ status = "disabled"; }; - uart5: serial@01c29400 { + uart5: serial@1c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; interrupts = ; @@ -754,7 +845,7 @@ status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; @@ -765,7 +856,7 @@ #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; @@ -776,7 +867,7 @@ #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; interrupts = ; @@ -787,7 +878,7 @@ #size-cells = <0>; }; - i2c3: i2c@01c2b800 { + i2c3: i2c@1c2b800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b800 0x400>; interrupts = ; @@ -798,7 +889,7 @@ #size-cells = <0>; }; - gmac: ethernet@01c30000 { + gmac: ethernet@1c30000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c30000 0x1054>; interrupts = ; @@ -815,7 +906,7 @@ #size-cells = <0>; }; - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun6i-a31-crypto", "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; @@ -826,7 +917,7 @@ reset-names = "ahb"; }; - codec: codec@01c22c00 { + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun6i-a31-codec"; reg = <0x01c22c00 0x400>; @@ -839,7 +930,7 @@ status = "disabled"; }; - timer@01c60000 { + timer@1c60000 { compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; @@ -851,7 +942,7 @@ resets = <&ccu RST_AHB1_HSTIMER>; }; - spi0: spi@01c68000 { + spi0: spi@1c68000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c68000 0x1000>; interrupts = ; @@ -863,7 +954,7 @@ status = "disabled"; }; - spi1: spi@01c69000 { + spi1: spi@1c69000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c69000 0x1000>; interrupts = ; @@ -875,7 +966,7 @@ status = "disabled"; }; - spi2: spi@01c6a000 { + spi2: spi@1c6a000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6a000 0x1000>; interrupts = ; @@ -887,7 +978,7 @@ status = "disabled"; }; - spi3: spi@01c6b000 { + spi3: spi@1c6b000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6b000 0x1000>; interrupts = ; @@ -899,7 +990,7 @@ status = "disabled"; }; - gic: interrupt-controller@01c81000 { + gic: interrupt-controller@1c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, @@ -910,7 +1001,7 @@ interrupts = ; }; - fe0: display-frontend@01e00000 { + fe0: display-frontend@1e00000 { compatible = "allwinner,sun6i-a31-display-frontend"; reg = <0x01e00000 0x20000>; interrupts = ; @@ -942,7 +1033,7 @@ }; }; - fe1: display-frontend@01e20000 { + fe1: display-frontend@1e20000 { compatible = "allwinner,sun6i-a31-display-frontend"; reg = <0x01e20000 0x20000>; interrupts = ; @@ -974,7 +1065,7 @@ }; }; - be1: display-backend@01e40000 { + be1: display-backend@1e40000 { compatible = "allwinner,sun6i-a31-display-backend"; reg = <0x01e40000 0x10000>; interrupts = ; @@ -1020,7 +1111,7 @@ }; }; - drc1: drc@01e50000 { + drc1: drc@1e50000 { compatible = "allwinner,sun6i-a31-drc"; reg = <0x01e50000 0x10000>; interrupts = ; @@ -1053,6 +1144,11 @@ #size-cells = <0>; reg = <1>; + drc1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc1>; + }; + drc1_out_tcon1: endpoint@1 { reg = <1>; remote-endpoint = <&tcon1_in_drc1>; @@ -1061,7 +1157,7 @@ }; }; - be0: display-backend@01e60000 { + be0: display-backend@1e60000 { compatible = "allwinner,sun6i-a31-display-backend"; reg = <0x01e60000 0x10000>; interrupts = ; @@ -1107,7 +1203,7 @@ }; }; - drc0: drc@01e70000 { + drc0: drc@1e70000 { compatible = "allwinner,sun6i-a31-drc"; reg = <0x01e70000 0x10000>; interrupts = ; @@ -1144,11 +1240,16 @@ reg = <0>; remote-endpoint = <&tcon0_in_drc0>; }; + + drc0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_drc0>; + }; }; }; }; - rtc: rtc@01f00000 { + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = , @@ -1163,7 +1264,7 @@ interrupts = ; }; - prcm@01f01400 { + prcm@1f01400 { compatible = "allwinner,sun6i-a31-prcm"; reg = <0x01f01400 0x200>; @@ -1215,12 +1316,12 @@ }; }; - cpucfg@01f01c00 { + cpucfg@1f01c00 { compatible = "allwinner,sun6i-a31-cpuconfig"; reg = <0x01f01c00 0x300>; }; - ir: ir@01f02000 { + ir: ir@1f02000 { compatible = "allwinner,sun5i-a13-ir"; clocks = <&apb0_gates 1>, <&ir_clk>; clock-names = "apb", "ir"; @@ -1230,7 +1331,7 @@ status = "disabled"; }; - r_pio: pinctrl@01f02c00 { + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun6i-a31-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = , @@ -1255,7 +1356,7 @@ }; }; - p2wi: i2c@01f03400 { + p2wi: i2c@1f03400 { compatible = "allwinner,sun6i-a31-p2wi"; reg = <0x01f03400 0x400>; interrupts = ; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 4c10123509c40402f4fb5658a8421de940eccf1a..0cdb38ab33779809e96433f04b1b18616a7746cb 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -52,17 +52,42 @@ / { model = "MSI Primo81 tablet"; compatible = "msi,primo81", "allwinner,sun6i-a31s"; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; }; &cpu0 { cpu-supply = <®_dcdc3>; }; +&de { + status = "okay"; +}; + &ehci0 { /* rtl8188etv wifi is connected here */ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { /* pull-ups and device VDDIO use AXP221 DLDO3 */ pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts index b3d98222bd8134700addbef18b22b57464999e07..298476485bb47830a03751cf28f3c246dca2d2e9 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -53,6 +53,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -90,6 +101,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { /* USB 2.0 4 port hub IC */ status = "okay"; @@ -112,6 +127,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index eb55e74232c9928a18b76c8768c3b224b5031644..4ed3162e3e5a009240c4771f140818b21c4b4879 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -109,6 +120,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -130,6 +145,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 2a50207618cb366409df6122a3b1649fe62cf7a9..39f43e4eb7423ea2faa2052eb8e74b5d08c9b934 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -91,6 +102,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -111,6 +126,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 852a0aa24dcee6c577b167c9d36d9c01b9a59403..8c9bedc602ecdfc7b5823c6c6e1b3f0725a7720e 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -126,6 +137,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -146,6 +161,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 004b6ddac8131c26d381aa046060a3876c6729e8..442f3c755f365b091ab18c25996936847551e510 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -98,6 +109,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -173,6 +188,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -241,6 +266,14 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_ahci_5v { gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 2ce1a9f13a178fa1315f5aac061ee6e0fcb80fcb..edf9c3c6c0d7f4636e0e52392e4642667e549e46 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -62,6 +62,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -80,6 +91,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -100,6 +115,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 097bd755764cfbff148ade65c15561ec33dd3325..ba250189d07f66be0c8939cbbe1a43c0ede4f27f 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -59,6 +59,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -85,6 +96,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -105,6 +120,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts new file mode 100644 index 0000000000000000000000000000000000000000..d99e7b193efe39550f1b4a18f39bb7d8521c68f6 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts @@ -0,0 +1,70 @@ + /* + * Copyright 2017 Olimex Ltd. + * Stefan Mavrodiev + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun7i-a20-olinuxino-micro.dts" + +/ { + model = "Olimex A20-OLinuXino-MICRO-eMMC"; + compatible = "olimex,a20-olinuxino-micro-emmc", "allwinner,sun7i-a20"; + + mmc2_pwrseq: pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&mmc2_pwrseq>; + status = "okay"; + + emmc: emmc@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 0b7403e4d687ea341c8f053dcc1da179f0acf162..dffbaa24b3ee7d125f824e239063a43e1e8aacef 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -66,6 +66,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -92,6 +103,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -102,7 +117,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -112,6 +127,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -229,6 +254,11 @@ }; &pio { + gmac_txerr: gmac_txerr@0 { + pins = "PA17"; + function = "gmac"; + }; + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { pins = "PH11"; function = "gpio_in"; @@ -256,6 +286,14 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -330,6 +368,10 @@ status = "okay"; }; +&usb_power_supply { + status = "okay"; +}; + &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 96bee776e1456b2e8787390bbcadbaecfb8563cd..68dfa82544fc4c574916c3d60c17a60097ddb2b1 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -46,9 +46,9 @@ #include #include - -#include #include +#include +#include / { interrupt-parent = <&gic>; @@ -66,9 +66,10 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&de_be0_clk>, - <&tcon0_ch1_clk>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>, + <&ccu CLK_HDMI>; status = "disabled"; }; @@ -76,9 +77,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&ahb_gates 36>, <&ahb_gates 44>, - <&de_be0_clk>, <&tcon0_ch0_clk>, - <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>, + <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; @@ -86,10 +87,10 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, - <&de_be0_clk>, <&tcon0_ch1_clk>, - <&dram_gates 5>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, + <&ccu CLK_AHB_DE_BE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>, + <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; }; @@ -102,7 +103,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; - clocks = <&cpu>; + clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ @@ -181,23 +182,13 @@ #size-cells = <1>; ranges; - osc24M: clk@01c20050 { + osc24M: clk@1c20050 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; + compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc3M: osc3M_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <8>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc3M"; - }; - osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -205,528 +196,6 @@ clock-output-names = "osc32k"; }; - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll2: clk@01c20008 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll2-clk"; - reg = <0x01c20008 0x8>; - clocks = <&osc24M>; - clock-output-names = "pll2-1x", "pll2-2x", - "pll2-4x", "pll2-8x"; - }; - - pll3: clk@01c20010 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20010 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll3"; - }; - - pll3x2: pll3x2_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&pll3>; - clock-div = <1>; - clock-mult = <2>; - clock-output-names = "pll3-2x"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-pll4-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6", - "pll6_div_4"; - }; - - pll7: clk@01c20030 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20030 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll7"; - }; - - pll7x2: pll7x2_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&pll7>; - clock-div = <1>; - clock-mult = <2>; - clock-output-names = "pll7-2x"; - }; - - pll8: clk@01c20040 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-pll4-clk"; - reg = <0x01c20040 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll8"; - }; - - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>, <&pll6 3>, <&pll6 1>; - clock-output-names = "ahb"; - /* - * Use PLL6 as parent, instead of CPU/AXI - * which has rate changes due to cpufreq - */ - assigned-clocks = <&ahb>; - assigned-clock-parents = <&pll6 3>; - }; - - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun7i-a20-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <3>, <4>, - <5>, <6>, <7>, <8>, - <9>, <10>, <11>, <12>, - <13>, <14>, <16>, - <17>, <18>, <20>, <21>, - <22>, <23>, <25>, - <28>, <32>, <33>, <34>, - <35>, <36>, <37>, <40>, - <41>, <42>, <43>, - <44>, <45>, <46>, - <47>, <49>, <50>, - <52>; - clock-output-names = "ahb_usb0", "ahb_ehci0", - "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", - "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", - "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms", - "ahb_nand", "ahb_sdram", "ahb_ace", - "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1", - "ahb_spi2", "ahb_spi3", "ahb_sata", - "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0", - "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0", - "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0", - "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", - "ahb_de_fe1", "ahb_gmac", "ahb_mp", - "ahb_mali"; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun7i-a20-apb0-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <1>, - <2>, <3>, <4>, - <5>, <6>, <7>, - <8>, <10>; - clock-output-names = "apb0_codec", "apb0_spdif", - "apb0_ac97", "apb0_i2s0", "apb0_i2s1", - "apb0_pio", "apb0_ir0", "apb0_ir1", - "apb0_i2s2", "apb0_keypad"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun7i-a20-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <3>, <4>, - <5>, <6>, <7>, - <15>, <16>, <17>, - <18>, <19>, <20>, - <21>, <22>, <23>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_i2c3", "apb1_can", - "apb1_scr", "apb1_ps20", "apb1_ps21", - "apb1_i2c4", "apb1_uart0", "apb1_uart1", - "apb1_uart2", "apb1_uart3", "apb1_uart4", - "apb1_uart5", "apb1_uart6", "apb1_uart7"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - mmc3_clk: clk@01c20094 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20094 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc3", - "mmc3_output", - "mmc3_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - pata_clk: clk@01c200ac { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200ac 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "pata"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - ir1_clk: clk@01c200b4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir1"; - }; - - i2s0_clk: clk@01c200b8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200b8 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "i2s0"; - }; - - ac97_clk: clk@01c200bc { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200bc 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "ac97"; - }; - - spdif_clk: clk@01c200c0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200c0 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "spdif"; - }; - - keypad_clk: clk@01c200c4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200c4 0x4>; - clocks = <&osc24M>; - clock-output-names = "keypad"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_ohci1", - "usb_phy"; - }; - - spi3_clk: clk@01c200d4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200d4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi3"; - }; - - i2s1_clk: clk@01c200d8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200d8 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "i2s1"; - }; - - i2s2_clk: clk@01c200dc { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200dc 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "i2s2"; - }; - - dram_gates: clk@01c20100 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-dram-gates-clk"; - reg = <0x01c20100 0x4>; - clocks = <&pll5 0>; - clock-indices = <0>, - <1>, <2>, - <3>, - <4>, - <5>, <6>, - <15>, - <24>, <25>, - <26>, <27>, - <28>, <29>; - clock-output-names = "dram_ve", - "dram_csi0", "dram_csi1", - "dram_ts", - "dram_tvd", - "dram_tve0", "dram_tve1", - "dram_output", - "dram_de_fe1", "dram_de_fe0", - "dram_de_be0", "dram_de_be1", - "dram_de_mp", "dram_ace"; - }; - - de_be0_clk: clk@01c20104 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20104 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be0"; - }; - - de_be1_clk: clk@01c20108 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20108 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be1"; - }; - - de_fe0_clk: clk@01c2010c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c2010c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe0"; - }; - - de_fe1_clk: clk@01c20110 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20110 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe1"; - }; - - tcon0_ch0_clk: clk@01c20118 { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c20118 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon0-ch0-sclk"; - - }; - - tcon1_ch0_clk: clk@01c2011c { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c2011c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon1-ch0-sclk"; - - }; - - tcon0_ch1_clk: clk@01c2012c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c2012c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon0-ch1-sclk"; - - }; - - tcon1_ch1_clk: clk@01c20130 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c20130 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon1-ch1-sclk"; - - }; - - ve_clk: clk@01c2013c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-ve-clk"; - reg = <0x01c2013c 0x4>; - clocks = <&pll4>; - clock-output-names = "ve"; - }; - - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; - reg = <0x01c20140 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "codec"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 2>, <&pll5 1>; - clock-output-names = "mbus"; - }; - /* * The following two are dummy clocks, placeholders * used in the gmac_tx clock. The gmac driver will @@ -736,71 +205,50 @@ * The actual TX clock rate is not controlled by the * gmac_tx clock. */ - mii_phy_tx_clk: clk@2 { + mii_phy_tx_clk: clk@1 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; clock-output-names = "mii_phy_tx"; }; - gmac_int_tx_clk: clk@3 { + gmac_int_tx_clk: clk@2 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <125000000>; clock-output-names = "gmac_int_tx"; }; - gmac_tx_clk: clk@01c20164 { + gmac_tx_clk: clk@1c20164 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-gmac-clk"; reg = <0x01c20164 0x4>; clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; clock-output-names = "gmac_tx"; }; + }; - /* - * Dummy clock used by output clocks - */ - osc24M_32k: clk@1 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <750>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc24M_32k"; - }; - clk_out_a: clk@01c201f0 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-out-clk"; - reg = <0x01c201f0 0x4>; - clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; - clock-output-names = "clk_out_a"; - }; - - clk_out_b: clk@01c201f4 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-out-clk"; - reg = <0x01c201f4 0x4>; - clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; - clock-output-names = "clk_out_b"; - }; + de: display-engine { + compatible = "allwinner,sun7i-a20-display-engine"; + allwinner,pipelines = <&fe0>, <&fe1>; + status = "disabled"; }; - soc@01c00000 { + soc@1c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sram-controller@01c00000 { + sram-controller@1c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; ranges; - sram_a: sram@00000000 { + sram_a: sram@0 { compatible = "mmio-sram"; reg = <0x00000000 0xc000>; #address-cells = <1>; @@ -814,14 +262,14 @@ }; }; - sram_d: sram@00010000 { + sram_d: sram@10000 { compatible = "mmio-sram"; reg = <0x00010000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00010000 0x1000>; - otg_sram: sram-section@0000 { + otg_sram: sram-section@0 { compatible = "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; @@ -829,7 +277,7 @@ }; }; - nmi_intc: interrupt-controller@01c00030 { + nmi_intc: interrupt-controller@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; #interrupt-cells = <2>; @@ -837,19 +285,19 @@ interrupts = ; }; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = ; - clocks = <&ahb_gates 6>; + clocks = <&ccu CLK_AHB_DMA>; #dma-cells = <2>; }; - nfc: nand@01c03000 { + nfc: nand@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = ; - clocks = <&ahb_gates 13>, <&nand_clk>; + clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 3>; dma-names = "rxtx"; @@ -858,11 +306,11 @@ #size-cells = <0>; }; - spi0: spi@01c05000 { + spi0: spi@1c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = ; - clocks = <&ahb_gates 20>, <&spi0_clk>; + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 27>, <&dma SUN4I_DMA_DEDICATED 26>; @@ -873,11 +321,11 @@ num-cs = <4>; }; - spi1: spi@01c06000 { + spi1: spi@1c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = ; - clocks = <&ahb_gates 21>, <&spi1_clk>; + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 9>, <&dma SUN4I_DMA_DEDICATED 8>; @@ -888,16 +336,16 @@ num-cs = <1>; }; - emac: ethernet@01c0b000 { + emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = ; - clocks = <&ahb_gates 17>; + clocks = <&ccu CLK_AHB_EMAC>; allwinner,sram = <&emac_sram 1>; status = "disabled"; }; - mdio: mdio@01c0b080 { + mdio: mdio@1c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; @@ -905,13 +353,111 @@ #size-cells = <0>; }; - mmc0: mmc@01c0f000 { + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun7i-a20-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = ; + resets = <&ccu RST_TCON0>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD0>, + <&ccu CLK_TCON0_CH0>, + <&ccu CLK_TCON0_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon0-pixel-clock"; + dmas = <&dma SUN4I_DMA_DEDICATED 14>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + + tcon0_in_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon0_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + tcon1: lcd-controller@1c0d000 { + compatible = "allwinner,sun7i-a20-tcon"; + reg = <0x01c0d000 0x1000>; + interrupts = ; + resets = <&ccu RST_TCON1>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD1>, + <&ccu CLK_TCON1_CH0>, + <&ccu CLK_TCON1_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon1-pixel-clock"; + dmas = <&dma SUN4I_DMA_DEDICATED 15>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon1_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon1>; + }; + + tcon1_in_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; + clocks = <&ccu CLK_AHB_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -922,13 +468,13 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; + clocks = <&ccu CLK_AHB_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -939,13 +485,13 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; + clocks = <&ccu CLK_AHB_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -956,13 +502,13 @@ #size-cells = <0>; }; - mmc3: mmc@01c12000 { + mmc3: mmc@1c12000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&ahb_gates 11>, - <&mmc3_clk 0>, - <&mmc3_clk 1>, - <&mmc3_clk 2>; + clocks = <&ccu CLK_AHB_MMC3>, + <&ccu CLK_MMC3>, + <&ccu CLK_MMC3_OUTPUT>, + <&ccu CLK_MMC3_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -973,10 +519,10 @@ #size-cells = <0>; }; - usb_otg: usb@01c13000 { + usb_otg: usb@1c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; + clocks = <&ccu CLK_AHB_OTG>; interrupts = ; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -986,52 +532,97 @@ status = "disabled"; }; - usbphy: phy@01c13400 { + usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun7i-a20-usb-phy"; reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; - clocks = <&usb_clk 8>; + clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; status = "disabled"; }; - ehci0: usb@01c14000 { + ehci0: usb@1c14000 { compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = ; - clocks = <&ahb_gates 1>; + clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - ohci0: usb@01c14400 { + ohci0: usb@1c14400 { compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = ; - clocks = <&usb_clk 6>, <&ahb_gates 2>; + clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun7i-a20-crypto", "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = ; - clocks = <&ahb_gates 5>, <&ss_clk>; + clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; clock-names = "ahb", "mod"; }; - spi2: spi@01c17000 { + hdmi: hdmi@1c16000 { + compatible = "allwinner,sun7i-a20-hdmi", + "allwinner,sun5i-a10s-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, + <&ccu 9>, + <&ccu 18>; + clock-names = "ahb", "mod", "pll-0", "pll-1"; + dmas = <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_DEDICATED 24>; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + + hdmi_in_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + spi2: spi@1c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = ; - clocks = <&ahb_gates 22>, <&spi2_clk>; + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 29>, <&dma SUN4I_DMA_DEDICATED 28>; @@ -1042,39 +633,39 @@ num-cs = <1>; }; - ahci: sata@01c18000 { + ahci: sata@1c18000 { compatible = "allwinner,sun4i-a10-ahci"; reg = <0x01c18000 0x1000>; interrupts = ; - clocks = <&pll6 0>, <&ahb_gates 25>; + clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>; status = "disabled"; }; - ehci1: usb@01c1c000 { + ehci1: usb@1c1c000 { compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; interrupts = ; - clocks = <&ahb_gates 3>; + clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; }; - ohci1: usb@01c1c400 { + ohci1: usb@1c1c400 { compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = ; - clocks = <&usb_clk 7>, <&ahb_gates 4>; + clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; }; - spi3: spi@01c1f000 { + spi3: spi@1c1f000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c1f000 0x1000>; interrupts = ; - clocks = <&ahb_gates 23>, <&spi3_clk>; + clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 31>, <&dma SUN4I_DMA_DEDICATED 30>; @@ -1085,11 +676,20 @@ num-cs = <1>; }; - pio: pinctrl@01c20800 { + ccu: clock@1c20000 { + compatible = "allwinner,sun7i-a20-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@1c20800 { compatible = "allwinner,sun7i-a20-pinctrl"; reg = <0x01c20800 0x400>; interrupts = ; - clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -1324,7 +924,7 @@ }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; interrupts = , @@ -1336,18 +936,18 @@ clocks = <&osc24M>; }; - wdt: watchdog@01c20c90 { + wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; }; - rtc: rtc@01c20d00 { + rtc: rtc@1c20d00 { compatible = "allwinner,sun7i-a20-rtc"; reg = <0x01c20d00 0x20>; interrupts = ; }; - pwm: pwm@01c20e00 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun7i-a20-pwm"; reg = <0x01c20e00 0xc>; clocks = <&osc24M>; @@ -1355,12 +955,12 @@ status = "disabled"; }; - spdif: spdif@01c21000 { + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x400>; interrupts = ; - clocks = <&apb0_gates 1>, <&spdif_clk>; + clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; clock-names = "apb", "spdif"; dmas = <&dma SUN4I_DMA_NORMAL 2>, <&dma SUN4I_DMA_NORMAL 2>; @@ -1368,30 +968,30 @@ status = "disabled"; }; - ir0: ir@01c21800 { + ir0: ir@1c21800 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 6>, <&ir0_clk>; + clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>; clock-names = "apb", "ir"; interrupts = ; reg = <0x01c21800 0x40>; status = "disabled"; }; - ir1: ir@01c21c00 { + ir1: ir@1c21c00 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 7>, <&ir1_clk>; + clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>; clock-names = "apb", "ir"; interrupts = ; reg = <0x01c21c00 0x40>; status = "disabled"; }; - i2s1: i2s@01c22000 { + i2s1: i2s@1c22000 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22000 0x400>; interrupts = ; - clocks = <&apb0_gates 4>, <&i2s1_clk>; + clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>; clock-names = "apb", "mod"; dmas = <&dma SUN4I_DMA_NORMAL 4>, <&dma SUN4I_DMA_NORMAL 4>; @@ -1399,12 +999,12 @@ status = "disabled"; }; - i2s0: i2s@01c22400 { + i2s0: i2s@1c22400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22400 0x400>; interrupts = ; - clocks = <&apb0_gates 3>, <&i2s0_clk>; + clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>; clock-names = "apb", "mod"; dmas = <&dma SUN4I_DMA_NORMAL 3>, <&dma SUN4I_DMA_NORMAL 3>; @@ -1412,19 +1012,19 @@ status = "disabled"; }; - lradc: lradc@01c22800 { + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = ; status = "disabled"; }; - codec: codec@01c22c00 { + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun7i-a20-codec"; reg = <0x01c22c00 0x40>; interrupts = ; - clocks = <&apb0_gates 0>, <&codec_clk>; + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; clock-names = "apb", "codec"; dmas = <&dma SUN4I_DMA_NORMAL 19>, <&dma SUN4I_DMA_NORMAL 19>; @@ -1432,17 +1032,17 @@ status = "disabled"; }; - sid: eeprom@01c23800 { + sid: eeprom@1c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; }; - i2s2: i2s@01c24400 { + i2s2: i2s@1c24400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c24400 0x400>; interrupts = ; - clocks = <&apb0_gates 8>, <&i2s2_clk>; + clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>; clock-names = "apb", "mod"; dmas = <&dma SUN4I_DMA_NORMAL 6>, <&dma SUN4I_DMA_NORMAL 6>; @@ -1450,179 +1050,179 @@ status = "disabled"; }; - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; interrupts = ; #thermal-sensor-cells = <0>; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 16>; + clocks = <&ccu CLK_APB1_UART0>; status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; + clocks = <&ccu CLK_APB1_UART1>; status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; + clocks = <&ccu CLK_APB1_UART2>; status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; + clocks = <&ccu CLK_APB1_UART3>; status = "disabled"; }; - uart4: serial@01c29000 { + uart4: serial@1c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 20>; + clocks = <&ccu CLK_APB1_UART4>; status = "disabled"; }; - uart5: serial@01c29400 { + uart5: serial@1c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 21>; + clocks = <&ccu CLK_APB1_UART5>; status = "disabled"; }; - uart6: serial@01c29800 { + uart6: serial@1c29800 { compatible = "snps,dw-apb-uart"; reg = <0x01c29800 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 22>; + clocks = <&ccu CLK_APB1_UART6>; status = "disabled"; }; - uart7: serial@01c29c00 { + uart7: serial@1c29c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c29c00 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 23>; + clocks = <&ccu CLK_APB1_UART7>; status = "disabled"; }; - ps20: ps2@01c2a000 { + ps20: ps2@1c2a000 { compatible = "allwinner,sun4i-a10-ps2"; reg = <0x01c2a000 0x400>; interrupts = ; - clocks = <&apb1_gates 6>; + clocks = <&ccu CLK_APB1_PS20>; status = "disabled"; }; - ps21: ps2@01c2a400 { + ps21: ps2@1c2a400 { compatible = "allwinner,sun4i-a10-ps2"; reg = <0x01c2a400 0x400>; interrupts = ; - clocks = <&apb1_gates 7>; + clocks = <&ccu CLK_APB1_PS21>; status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; - clocks = <&apb1_gates 0>; + clocks = <&ccu CLK_APB1_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; - clocks = <&apb1_gates 1>; + clocks = <&ccu CLK_APB1_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = ; - clocks = <&apb1_gates 2>; + clocks = <&ccu CLK_APB1_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c3: i2c@01c2b800 { + i2c3: i2c@1c2b800 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b800 0x400>; interrupts = ; - clocks = <&apb1_gates 3>; + clocks = <&ccu CLK_APB1_I2C3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - can0: can@01c2bc00 { + can0: can@1c2bc00 { compatible = "allwinner,sun7i-a20-can", "allwinner,sun4i-a10-can"; reg = <0x01c2bc00 0x400>; interrupts = ; - clocks = <&apb1_gates 4>; + clocks = <&ccu CLK_APB1_CAN>; status = "disabled"; }; - i2c4: i2c@01c2c000 { + i2c4: i2c@1c2c000 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2c000 0x400>; interrupts = ; - clocks = <&apb1_gates 15>; + clocks = <&ccu CLK_APB1_I2C4>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - gmac: ethernet@01c50000 { + gmac: ethernet@1c50000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c50000 0x10000>; interrupts = ; interrupt-names = "macirq"; - clocks = <&ahb_gates 49>, <&gmac_tx_clk>; + clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>; clock-names = "stmmaceth", "allwinner_gmac_tx"; snps,pbl = <2>; snps,fixed-burst; @@ -1632,17 +1232,17 @@ #size-cells = <0>; }; - hstimer@01c60000 { + hstimer@1c60000 { compatible = "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; interrupts = , , , ; - clocks = <&ahb_gates 28>; + clocks = <&ccu CLK_AHB_HSTIMER>; }; - gic: interrupt-controller@01c81000 { + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, @@ -1653,5 +1253,164 @@ interrupts = ; }; + fe0: display-frontend@1e00000 { + compatible = "allwinner,sun7i-a20-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = ; + clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>, + <&ccu CLK_DRAM_DE_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + + fe0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe0>; + }; + }; + }; + }; + + fe1: display-frontend@1e20000 { + compatible = "allwinner,sun7i-a20-display-frontend"; + reg = <0x01e20000 0x20000>; + interrupts = ; + clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>, + <&ccu CLK_DRAM_DE_FE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe1_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe1>; + }; + + fe1_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe1>; + }; + }; + }; + }; + + be1: display-backend@1e40000 { + compatible = "allwinner,sun7i-a20-display-backend"; + reg = <0x01e40000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>, + <&ccu CLK_DRAM_DE_BE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be1_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be1>; + }; + + be1_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be1>; + }; + }; + + be1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon1_in_be0>; + }; + + be1_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_be1>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + compatible = "allwinner,sun7i-a20-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_DRAM_DE_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + + be0_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + + be0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_be0>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index ea50dda75adceba97c0d9f16ff4f90eab366c3d9..971f9be699a7cbe7fe761f3ae671c09335fa337a 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -118,13 +118,13 @@ }; }; - soc@01c00000 { + soc@1c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-a23-dma"; reg = <0x01c02000 0x1000>; interrupts = ; @@ -133,7 +133,7 @@ #dma-cells = <1>; }; - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_BUS_MMC0>, @@ -152,7 +152,7 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_BUS_MMC1>, @@ -171,7 +171,7 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ccu CLK_BUS_MMC2>, @@ -190,7 +190,7 @@ #size-cells = <0>; }; - nfc: nand@01c03000 { + nfc: nand@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = ; @@ -203,7 +203,7 @@ #size-cells = <0>; }; - usb_otg: usb@01c19000 { + usb_otg: usb@1c19000 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c19000 0x0400>; clocks = <&ccu CLK_BUS_OTG>; @@ -216,7 +216,7 @@ status = "disabled"; }; - usbphy: phy@01c19400 { + usbphy: phy@1c19400 { /* * compatible and address regions get set in * SoC specific dtsi file @@ -233,7 +233,7 @@ #phy-cells = <1>; }; - ehci0: usb@01c1a000 { + ehci0: usb@1c1a000 { compatible = "allwinner,sun8i-a23-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; interrupts = ; @@ -244,7 +244,7 @@ status = "disabled"; }; - ohci0: usb@01c1a400 { + ohci0: usb@1c1a400 { compatible = "allwinner,sun8i-a23-ohci", "generic-ohci"; reg = <0x01c1a400 0x100>; interrupts = ; @@ -255,7 +255,7 @@ status = "disabled"; }; - ccu: clock@01c20000 { + ccu: clock@1c20000 { reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; @@ -263,7 +263,7 @@ #reset-cells = <1>; }; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c20800 0x400>; /* interrupts get set in SoC specific dtsi file */ @@ -344,7 +344,7 @@ }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = , @@ -352,13 +352,13 @@ clocks = <&osc24M>; }; - wdt0: watchdog@01c20ca0 { + wdt0: watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = ; }; - pwm: pwm@01c21400 { + pwm: pwm@1c21400 { compatible = "allwinner,sun7i-a20-pwm"; reg = <0x01c21400 0xc>; clocks = <&osc24M>; @@ -366,14 +366,14 @@ status = "disabled"; }; - lradc: lradc@01c22800 { + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = ; status = "disabled"; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; @@ -386,7 +386,7 @@ status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; @@ -399,7 +399,7 @@ status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; @@ -412,7 +412,7 @@ status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = ; @@ -425,7 +425,7 @@ status = "disabled"; }; - uart4: serial@01c29000 { + uart4: serial@1c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = ; @@ -438,7 +438,7 @@ status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; @@ -449,7 +449,7 @@ #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; @@ -460,7 +460,7 @@ #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; interrupts = ; @@ -498,7 +498,7 @@ assigned-clock-rates = <384000000>; }; - gic: interrupt-controller@01c81000 { + gic: interrupt-controller@1c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, @@ -509,7 +509,7 @@ interrupts = ; }; - rtc: rtc@01f00000 { + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = , @@ -527,7 +527,7 @@ interrupts = ; }; - prcm@01f01400 { + prcm@1f01400 { compatible = "allwinner,sun8i-a23-prcm"; reg = <0x01f01400 0x200>; @@ -575,12 +575,12 @@ }; }; - cpucfg@01f01c00 { + cpucfg@1f01c00 { compatible = "allwinner,sun8i-a23-cpuconfig"; reg = <0x01f01c00 0x300>; }; - r_uart: serial@01f02800 { + r_uart: serial@1f02800 { compatible = "snps,dw-apb-uart"; reg = <0x01f02800 0x400>; interrupts = ; @@ -591,7 +591,7 @@ status = "disabled"; }; - r_pio: pinctrl@01f02c00 { + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = ; @@ -618,7 +618,7 @@ }; }; - r_rsb: rsb@01f03400 { + r_rsb: rsb@1f03400 { compatible = "allwinner,sun8i-a23-rsb"; reg = <0x01f03400 0x400>; interrupts = ; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 4d1f929780a8df4f831710c74cf6bbd0659c79dc..58e6585b504bab464c3845b2f4a16cb6769f6f26 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -49,8 +49,8 @@ reg = <0x40000000 0x40000000>; }; - soc@01c00000 { - codec: codec@01c22c00 { + soc@1c00000 { + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-a23-codec"; reg = <0x01c22c00 0x400>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 22660919bd08ae8b9c43eff253a9180c16ab0202..50eb84fa246ac6c0608a8c9f2897ef3313581d0c 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -203,8 +203,8 @@ }; }; - soc@01c00000 { - tcon0: lcd-controller@01c0c000 { + soc@1c00000 { + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-a33-tcon"; reg = <0x01c0c000 0x1000>; interrupts = ; @@ -240,7 +240,7 @@ }; }; - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = ; @@ -250,7 +250,7 @@ reset-names = "ahb"; }; - dai: dai@01c22c00 { + dai: dai@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun6i-a31-i2s"; reg = <0x01c22c00 0x200>; @@ -263,7 +263,7 @@ status = "disabled"; }; - codec: codec@01c22e00 { + codec: codec@1c22e00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-a33-codec"; reg = <0x01c22e00 0x400>; @@ -273,14 +273,14 @@ status = "disabled"; }; - ths: ths@01c25000 { + ths: ths@1c25000 { compatible = "allwinner,sun8i-a33-ths"; reg = <0x01c25000 0x100>; #thermal-sensor-cells = <0>; #io-channel-cells = <0>; }; - fe0: display-frontend@01e00000 { + fe0: display-frontend@1e00000 { compatible = "allwinner,sun8i-a33-display-frontend"; reg = <0x01e00000 0x20000>; interrupts = ; @@ -308,7 +308,7 @@ }; }; - be0: display-backend@01e60000 { + be0: display-backend@1e60000 { compatible = "allwinner,sun8i-a33-display-backend"; reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; reg-names = "be", "sat"; @@ -350,7 +350,7 @@ }; }; - drc0: drc@01e70000 { + drc0: drc@1e70000 { compatible = "allwinner,sun8i-a33-drc"; reg = <0x01e70000 0x10000>; interrupts = ; diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 1f0d60afb25b695c44523c70d80677f1dd753ecb..5091cecbcd1eb0de85a11ccc268e2adcc76324be 100644 --- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -43,7 +43,8 @@ /dts-v1/; #include "sun8i-a83t.dtsi" -#include "sunxi-common-regulators.dtsi" + +#include / { model = "Allwinner A83T H8Homlet Proto Dev Board v2.0"; @@ -56,6 +57,26 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reg_usb0_vbus: reg-usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + }; + + reg_usb1_vbus: reg-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + }; }; &ehci0 { @@ -65,7 +86,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ bus-width = <4>; cd-inverted; @@ -75,7 +96,8 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_emmc_pins>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -86,16 +108,6 @@ status = "okay"; }; -®_usb0_vbus { - gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ - status = "okay"; -}; - -®_usb1_vbus { - gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ - status = "okay"; -}; - &r_rsb { status = "okay"; @@ -104,6 +116,8 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + swin-supply = <®_dcdc1>; }; ac100: codec@e89 { @@ -131,6 +145,113 @@ }; }; +#include "axp81x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dram-pll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpub"; +}; + +®_dcdc4 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-sys"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-mipi"; +}; + +®_dldo4 { + /* + * The PHY requires 20ms after all voltages are applied until core + * logic is ready and 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ephy"; +}; + +®_fldo1 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd12-hsic"; +}; + +®_fldo2 { + /* + * Despite the embedded CPUs core not being used in any way, + * this must remain on or the system will hang. + */ + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +®_sw { + regulator-name = "vcc-wifi"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 2bafd7e99ef7f2d0d83cfcd155240492059e5d91..c606af3dbfedf9351aed99313917b3f9e85e98c4 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -44,7 +44,6 @@ /dts-v1/; #include "sun8i-a83t.dtsi" -#include "sunxi-common-regulators.dtsi" #include @@ -59,6 +58,27 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reg_usb1_vbus: reg-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + /* The WiFi low power clock must be 32768 Hz */ + assigned-clocks = <&ac100_rtc 1>; + assigned-clock-rates = <32768>; + /* enables internal regulator and de-asserts reset */ + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + }; }; &ehci0 { @@ -71,17 +91,35 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ cd-inverted; status = "okay"; }; +&mmc1 { + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_emmc_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -96,6 +134,10 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + fldoin-supply = <®_dcdc5>; + swin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; }; ac100: codec@e89 { @@ -123,17 +165,126 @@ }; }; -®_usb1_vbus { - gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ +#include "axp81x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dram-pll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + /* schematics says 3.1V but FEX file says 3.3V */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpub"; +}; + +®_dcdc4 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + /* + * This powers both the WiFi/BT module's main power, I/O supply, + * and external pull-ups on all the data lines. It should be set + * to the same voltage as the I/O supply (DCDC1 in this case) to + * avoid any leakage or mismatch. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pd"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; status = "okay"; }; -®_vcc3v0 { - status = "disabled"; +®_fldo1 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd12-hsic"; +}; + +®_fldo2 { + /* + * Despite the embedded CPUs core not being used in any way, + * this must remain on or the system will hang. + */ + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; }; -®_vcc5v0 { - status = "disabled"; +®_sw { + /* + * The PHY requires 20ms after all voltages + * are applied until core logic is ready and + * 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC + * ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; + regulator-name = "vcc-ephy"; }; &uart0 { diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index 716a205c6dbbeca282efbe4498742634205ad8bd..7f0a3f6d0cf238ad5786ed8088d2b306e16ab63e 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -44,7 +44,6 @@ /dts-v1/; #include "sun8i-a83t.dtsi" -#include "sunxi-common-regulators.dtsi" #include @@ -95,6 +94,26 @@ refclk-frequency = <19200000>; }; + reg_usb1_vbus: reg-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */ + }; + + reg_usb2_vbus: reg-usb2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb2-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "On-board SPDIF"; @@ -112,6 +131,17 @@ #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + /* The WiFi low power clock must be 32768 Hz */ + assigned-clocks = <&ac100_rtc 1>; + assigned-clock-rates = <32768>; + /* enables internal regulator and de-asserts reset */ + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + }; }; &ehci0 { @@ -127,17 +157,26 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ cd-inverted; status = "okay"; }; +&mmc1 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_sw>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_emmc_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -152,6 +191,9 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + swin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; }; ac100: codec@e89 { @@ -179,22 +221,143 @@ }; }; -®_usb1_vbus { - gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */ - status = "okay"; +#include "axp81x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dram-pll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; }; -®_usb2_vbus { - gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ +®_dcdc1 { + /* + * The schematics say this should be 3.3V, but the FEX file says + * it should be 3V. The latter makes sense, as the WiFi module's + * I/O is indirectly powered from DCDC1, through SW. It is rated + * at 2.98V maximum. + */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpub"; +}; + +®_dcdc4 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-sys"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "dp-pwr"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "ephy-io"; +}; + +®_dldo4 { + /* + * The PHY requires 20ms after all voltages are applied until core + * logic is ready and 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ephy"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; status = "okay"; }; -®_vcc3v0 { - status = "disabled"; +®_eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "dp-bridge-1"; +}; + +®_eldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "dp-bridge-2"; +}; + +®_fldo1 { + /* TODO should be handled by USB PHY */ + regulator-always-on; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd12-hsic"; +}; + +®_fldo2 { + /* + * Despite the embedded CPUs core not being used in any way, + * this must remain on or the system will hang. + */ + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; }; -®_vcc5v0 { - status = "disabled"; +®_sw { + regulator-name = "vcc-wifi-io"; }; &spdif { diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts new file mode 100644 index 0000000000000000000000000000000000000000..98715538932f10bd048b355b4f7bb5bfc183a7cd --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -0,0 +1,349 @@ +/* + * Copyright (C) 2017 Touchless Biometric Systems AG + * Tomas Novotny + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a83t.dtsi" + +#include + +/ { + model = "TBS A711 Tablet"; + compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vbat: reg-vbat { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + reg_vmain: reg-vmain { + compatible = "regulator-fixed"; + regulator-name = "vmain"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_vbat>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + + /* + * This is actually Bluetooth's clock, but we have to + * hook it up somewheere + */ + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + }; +}; + +/* + * An USB-2 hub is connected here, which also means we don't need to + * enable the OHCI controller. + */ +&ehci0 { + status = "okay"; +}; + +/* + * There's a modem connected here that needs to be initialised before + * being able to be enumerated. + */ +&ehci1 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_dcdc1>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&mmc1 { + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_dldo1>; + non-removable; + wakeup-source; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 WL_WAKE_UP */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-0 = <&mmc2_8bit_emmc_pins>; + pinctrl-names = "default"; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp81x: pmic@3a3 { + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + swin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; + }; + + ac100: codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", + "cko2_rtc", + "cko3_rtc"; + }; + }; + +}; + +#include "axp81x.dtsi" + +®_aldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1.8"; +}; + +®_aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-name = "vdd-drampll"; +}; + +®_aldo3 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + regulator-name = "vcc-io"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-name = "vdd-cpu-A"; +}; + +®_dcdc3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-name = "vdd-cpu-B"; +}; + +®_dcdc4 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-name = "vcc-wifi-io"; +}; + +®_dldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <4200000>; + regulator-name = "vcc-mipi"; +}; + +®_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-csi-r"; +}; + +®_eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dsi"; +}; + +®_eldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-csi-f"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-hsic"; +}; + +®_fldo2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-name = "vdd-cpus"; +}; + +®_ldo_io0 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-name = "vcc-ctp"; + status = "okay"; +}; + +®_ldo_io1 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-name = "vcc-vb"; + status = "okay"; +}; + +®_sw { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-name = "vcc-lcd"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +/* There's the BT part of the AP6210 connected to that UART */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus_supply = <®_vmain>; + usb2_vbus_supply = <®_vmain>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index f996bd343e50ca156830b373048f3d51a0234116..19acae1b40898a77afbbedbe21cbcaecdffa0ab5 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -54,12 +54,6 @@ #address-cells = <1>; #size-cells = <1>; - aliases { - }; - - chosen { - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -218,6 +212,8 @@ resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -242,7 +238,7 @@ #size-cells = <0>; }; - usb_otg: usb@01c19000 { + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a83t-musb", "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; @@ -348,6 +344,14 @@ bias-pull-up; }; + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", + "PG3", "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins { pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", @@ -371,6 +375,16 @@ pins = "PF2", "PF4"; function = "uart0"; }; + + uart1_pins: uart1-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + uart1_rts_cts_pins: uart1-rts-cts-pins { + pins = "PG8", "PG9"; + function = "uart1"; + }; }; timer@1c20c00 { @@ -404,7 +418,7 @@ status = "disabled"; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; @@ -415,6 +429,17 @@ status = "disabled"; }; + uart1: serial@1c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + status = "disabled"; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index b1502df7b50923a70d996847d1cd258d92cda73c..6713d0f2b3f4d3f3f62231bf6a74bf35828ce8b0 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -56,6 +56,8 @@ aliases { serial0 = &uart0; + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &xr819; }; @@ -102,6 +104,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index a337af1de32246b69807f4ee3b65e04e63231967..f2292deaa5908e845c68f73f2ed186b561b7d29a 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -52,6 +52,7 @@ compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; serial1 = &uart1; }; @@ -63,7 +64,6 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&pwr_led_bpi_m2p>; pwr_led { label = "bananapi-m2-plus:red:pwr"; @@ -75,7 +75,6 @@ gpio_keys { compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&sw_r_bpi_m2p>; sw4 { label = "power"; @@ -97,7 +96,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; - pinctrl-0 = <&wifi_en_bpi_m2p>; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; }; @@ -114,6 +112,24 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -171,23 +187,6 @@ status = "okay"; }; -&r_pio { - pwr_led_bpi_m2p: led_pins@0 { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_bpi_m2p: key_pins@0 { - pins = "PL3"; - function = "gpio_in"; - }; - - wifi_en_bpi_m2p: wifi_en_pin { - pins = "PL7"; - function = "gpio_out"; - }; -}; - ®_usb0_vbus { gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */ status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts index 8ddd1b2cc0970f6bed86f7eb1e5eb433dd7358f0..0a8b79cf59549769dc1cb949ef65b3eccad1b7dd 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts @@ -45,6 +45,27 @@ / { model = "FriendlyArm NanoPi M1 Plus"; compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3"; + + aliases { + serial1 = &uart3; + ethernet1 = &sdio_wifi; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; }; &ehci1 { @@ -55,6 +76,50 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: sdio_wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + &ohci1 { status = "okay"; }; @@ -62,3 +127,9 @@ &ohci2 { status = "okay"; }; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts index ec63d104b404b012b943ad76d256a857402afda1..3a2ccdb28afddf293e324210874fc2744497e3b9 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts @@ -55,6 +55,12 @@ status = "okay"; }; +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + &ohci1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts index 8d2cc6e9a03faff3cc71965493e5c54c1359e9f3..78f6c24952dd128249fd3010d212222832bb060a 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts @@ -46,3 +46,10 @@ model = "FriendlyARM NanoPi NEO"; compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; }; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index c6decee41a275e4970cf0c538386314f449f914f..7646e331bd2934f56dfb79e358cc9692cdfb2cbb 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -81,7 +81,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sw_r_npi>; - k1@0 { + k1 { label = "k1"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -108,19 +108,19 @@ }; &pio { - leds_npi: led_pins@0 { + leds_npi: led_pins { pins = "PA10"; function = "gpio_out"; }; }; &r_pio { - leds_r_npi: led_pins@0 { + leds_r_npi: led_pins { pins = "PL10"; function = "gpio_out"; }; - sw_r_npi: key_pins@0 { + sw_r_npi: key_pins { pins = "PL3"; function = "gpio_in"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index 8ff71b1bb45b1c918d71e686ef4da4de7250306a..b20be95b49d5c686f011aaff5c2be90b448dd7e7 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -54,6 +54,7 @@ aliases { serial0 = &uart0; /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &rtl8189; }; @@ -117,6 +118,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -152,24 +160,24 @@ }; &pio { - leds_opc: led_pins@0 { + leds_opc: led_pins { pins = "PA15"; function = "gpio_out"; }; }; &r_pio { - leds_r_opc: led_pins@0 { + leds_r_opc: led_pins { pins = "PL10"; function = "gpio_out"; }; - sw_r_opc: key_pins@0 { + sw_r_opc: key_pins { pins = "PL3", "PL4"; function = "gpio_in"; }; - wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 { + wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin { pins = "PL7"; function = "gpio_out"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts index 9b47a0def740c5ca43af9fd17503c3b2a28eb6c3..a70a1daf4e2c3e949a555eac59b00f9ec7a0d933 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts @@ -141,19 +141,19 @@ }; &pio { - leds_opc: led_pins@0 { + leds_opc: led_pins { pins = "PA15"; function = "gpio_out"; }; }; &r_pio { - leds_r_opc: led_pins@0 { + leds_r_opc: led_pins { pins = "PL10"; function = "gpio_out"; }; - sw_r_opc: key_pins@0 { + sw_r_opc: key_pins { pins = "PL3"; function = "gpio_in"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 5fea430e0eb1006120dd9b98dd904cdd7af14b67..82e5d28cd698c7b423f2ab2c2e5cc9da5f09dc0f 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -52,6 +52,7 @@ compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -97,6 +98,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; @@ -116,19 +124,19 @@ }; &pio { - leds_opc: led_pins@0 { + leds_opc: led_pins { pins = "PA15"; function = "gpio_out"; }; }; &r_pio { - leds_r_opc: led_pins@0 { + leds_r_opc: led_pins { pins = "PL10"; function = "gpio_out"; }; - sw_r_opc: key_pins@0 { + sw_r_opc: key_pins { pins = "PL3"; function = "gpio_in"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index 8b93f5c781a70b565ed0012d2c29b35f04987dcd..a10281b455f50ccad1f26087ae14884600c19c90 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -53,6 +53,11 @@ }; }; +&emac { + /* LEDs changed to active high on the plus */ + /delete-property/ allwinner,leds-active-low; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index 1a044b17d6c61e5cc391782c5e06aa3df7322548..d22546df1b822b6aa195dba75c5874d4c1db5c01 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -52,6 +52,7 @@ compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -113,6 +114,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -146,19 +154,19 @@ }; &pio { - leds_opc: led_pins@0 { + leds_opc: led_pins { pins = "PA15"; function = "gpio_out"; }; }; &r_pio { - leds_r_opc: led_pins@0 { + leds_r_opc: led_pins { pins = "PL10"; function = "gpio_out"; }; - sw_r_opc: key_pins@0 { + sw_r_opc: key_pins { pins = "PL3"; function = "gpio_in"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index 828ae7a526d924955e666a4ad110f565aa931bf5..cbc499b04de44c4c16563e3d8c9828b683944686 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -47,6 +47,10 @@ model = "Xunlong Orange Pi Plus / Plus 2"; compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; + aliases { + ethernet0 = &emac; + }; + reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; regulator-name = "gmac-3v3"; @@ -74,6 +78,24 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; @@ -92,7 +114,7 @@ }; &pio { - usb3_vbus_pin_a: usb3_vbus_pin@0 { + usb3_vbus_pin_a: usb3_vbus_pin { pins = "PG11"; function = "gpio_out"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts index 97920b12a944526f3c5dd15de7435f5e30195a3c..6dbf7b2e0c13c44f06e7970c006f3357f0d0493e 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts @@ -61,3 +61,19 @@ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ }; }; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts new file mode 100644 index 0000000000000000000000000000000000000000..8c5efe2a9881c44335d4a97da7e41ebe303114f0 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2017 Chen-Yu Tsai + * Copyright (C) 2017 Icenowy Zheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-r40.dtsi" + +#include + +/ { + model = "Banana Pi BPI-M2-Ultra"; + compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr-led { + label = "bananapi:red:pwr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + user-led-green { + label = "bananapi:green:user"; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; + }; + + user-led-blue { + label = "bananapi:blue:user"; + gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + enable-active-high; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp22x: pmic@34 { + compatible = "x-powers,axp221"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pg_pins>; + vmmc-supply = <®_dldo2>; + vqmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..173dcc1652d2be98db9a34b4c068c22f307c9d59 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -0,0 +1,473 @@ +/* + * Copyright 2017 Chen-Yu Tsai + * Copyright 2017 Icenowy Zheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nmi_intc: interrupt-controller@1c00030 { + compatible = "allwinner,sun7i-a20-sc-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01c00030 0x0c>; + interrupts = ; + }; + + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun8i-r40-mmc", + "allwinner,sun50i-a64-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@1c10000 { + compatible = "allwinner,sun8i-r40-mmc", + "allwinner,sun50i-a64-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@1c11000 { + compatible = "allwinner,sun8i-r40-emmc", + "allwinner,sun50i-a64-emmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + pinctrl-0 = <&mmc2_pins>; + pinctrl-names = "default"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc3: mmc@1c12000 { + compatible = "allwinner,sun8i-r40-mmc", + "allwinner,sun50i-a64-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC3>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usbphy: phy@1c13400 { + compatible = "allwinner,sun8i-r40-usb-phy"; + reg = <0x01c13400 0x14>, + <0x01c14800 0x4>, + <0x01c19800 0x4>, + <0x01c1c800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1", + "pmu2"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci1: usb@1c19000 { + compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; + reg = <0x01c19000 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_EHCI1>; + resets = <&ccu RST_BUS_EHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@1c19400 { + compatible = "allwinner,sun8i-r40-ohci", "generic-ohci"; + reg = <0x01c19400 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_OHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci2: usb@1c1c000 { + compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; + reg = <0x01c1c000 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_EHCI2>; + resets = <&ccu RST_BUS_EHCI2>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@1c1c400 { + compatible = "allwinner,sun8i-r40-ohci", "generic-ohci"; + reg = <0x01c1c400 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_OHCI2>, + <&ccu CLK_USB_OHCI2>; + resets = <&ccu RST_BUS_OHCI2>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ccu: clock@1c20000 { + compatible = "allwinner,sun8i-r40-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@1c20800 { + compatible = "allwinner,sun8i-r40-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + i2c0_pins: i2c0-pins { + pins = "PB0", "PB1"; + function = "i2c0"; + }; + + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc1_pg_pins: mmc1-pg-pins { + pins = "PG0", "PG1", "PG2", + "PG3", "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_pins: mmc2-pins { + pins = "PC5", "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", "PC13", "PC14", + "PC15", "PC24"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + uart0_pb_pins: uart0-pb-pins { + pins = "PB22", "PB23"; + function = "uart0"; + }; + }; + + wdt: watchdog@1c20c90 { + compatible = "allwinner,sun4i-a10-wdt"; + reg = <0x01c20c90 0x10>; + }; + + uart0: serial@1c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + status = "disabled"; + }; + + uart1: serial@1c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + status = "disabled"; + }; + + uart2: serial@1c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@1c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@1c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + + uart5: serial@1c29400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29400 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART5>; + resets = <&ccu RST_BUS_UART5>; + status = "disabled"; + }; + + uart6: serial@1c29800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART6>; + resets = <&ccu RST_BUS_UART6>; + status = "disabled"; + }; + + uart7: serial@1c29c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29c00 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART7>; + resets = <&ccu RST_BUS_UART7>; + status = "disabled"; + }; + + i2c0: i2c@1c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@1c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@1c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@1c2b800 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b800 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c4: i2c@1c2c000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2c000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C4>; + resets = <&ccu RST_BUS_I2C4>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = ; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 3a06dc5b3746719b18a7fbbf579aaff668493060..443b083c6adc9a1c9f605554fcada283e8d90872 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -178,7 +178,7 @@ }; - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_BUS_MMC0>, @@ -197,7 +197,7 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_BUS_MMC1>, @@ -218,7 +218,7 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ccu CLK_BUS_MMC2>, @@ -237,7 +237,7 @@ #size-cells = <0>; }; - usb_otg: usb@01c19000 { + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x0400>; clocks = <&ccu CLK_BUS_OTG>; @@ -250,7 +250,7 @@ status = "disabled"; }; - usbphy: phy@01c19400 { + usbphy: phy@1c19400 { compatible = "allwinner,sun8i-v3s-usb-phy"; reg = <0x01c19400 0x2c>, <0x01c1a800 0x4>; @@ -264,7 +264,7 @@ #phy-cells = <1>; }; - ccu: clock@01c20000 { + ccu: clock@1c20000 { compatible = "allwinner,sun8i-v3s-ccu"; reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; @@ -273,14 +273,14 @@ #reset-cells = <1>; }; - rtc: rtc@01c20400 { + rtc: rtc@1c20400 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01c20400 0x54>; interrupts = , ; }; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { compatible = "allwinner,sun8i-v3s-pinctrl"; reg = <0x01c20800 0x400>; interrupts = , @@ -324,7 +324,7 @@ }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = , @@ -332,7 +332,7 @@ clocks = <&osc24M>; }; - wdt0: watchdog@01c20ca0 { + wdt0: watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = ; @@ -345,7 +345,7 @@ status = "disabled"; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; @@ -356,7 +356,7 @@ status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; @@ -367,7 +367,7 @@ status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; @@ -378,7 +378,7 @@ status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; @@ -391,7 +391,7 @@ #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; @@ -416,7 +416,7 @@ #size-cells = <0>; }; - gic: interrupt-controller@01c81000 { + gic: interrupt-controller@1c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, <0x01c82000 0x1000>, diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts new file mode 100644 index 0000000000000000000000000000000000000000..fe16fc0eb51843a152f9afa12f1546cc6d7d7eb8 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts @@ -0,0 +1,173 @@ +/* + * Copyright (C) 2017 Icenowy Zheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-r40.dtsi" + +#include + +/ { + model = "Banana Pi M2 Berry"; + compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr-led { + label = "bananapi:red:pwr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + user-led { + label = "bananapi:green:user"; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + enable-active-high; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ + }; +}; + +&i2c0 { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pg_pins>; + vmmc-supply = <®_dldo2>; + vqmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 3741ac71c3d62588b507199b425a44987df52397..4024639aa00570954c095516ca8e880c25d9a508 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -62,8 +62,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_cubieboard4>; green { label = "cubieboard4:green:usr"; @@ -76,7 +74,7 @@ }; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&ac100_rtc 1>; clock-names = "ext_clock"; @@ -87,7 +85,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ @@ -97,7 +95,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_cubieboard4>; + pinctrl-0 = <&mmc1_pins>; vmmc-supply = <®_dldo1>; vqmmc-supply = <®_cldo3>; mmc-pwrseq = <&wifi_pwrseq>; @@ -130,30 +128,10 @@ clocks = <&ac100_rtc 0>; }; -&pio { - led_pins_cubieboard4: led-pins@0 { - pins = "PH6", "PH17"; - function = "gpio_out"; - }; - - mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { - pins = "PH18"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &r_ir { status = "okay"; }; -&r_pio { - wifi_en_pin_cubieboard4: wifi_en_pin@0 { - pins = "PL2"; - function = "gpio_out"; - }; -}; - &r_rsb { status = "okay"; @@ -427,6 +405,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 85f1ad6703109ff736854532b7242d32281c000a..a9b807be99a02598c59811e35d32cec1cddf5322 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -62,11 +62,8 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>; /* The LED names match those found on the board */ - led2 { label = "optimus:led2:usr"; gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; @@ -86,8 +83,6 @@ reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_optimus>; - regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; @@ -97,15 +92,13 @@ reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_pin_optimus>; - regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&ac100_rtc 1>; clock-names = "ext_clock"; @@ -129,7 +122,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ @@ -139,7 +132,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_optimus>; + pinctrl-0 = <&mmc1_pins>; vmmc-supply = <®_dldo1>; vqmmc-supply = <®_cldo3>; mmc-pwrseq = <&wifi_pwrseq>; @@ -180,45 +173,10 @@ clocks = <&ac100_rtc 0>; }; -&pio { - led_pins_optimus: led-pins@0 { - pins = "PH0", "PH1"; - function = "gpio_out"; - }; - - mmc0_cd_pin_optimus: mmc0_cd_pin@0 { - pins = "PH18"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_optimus: usb1_vbus_pin@1 { - pins = "PH4"; - function = "gpio_out"; - }; - - usb3_vbus_pin_optimus: usb3_vbus_pin@1 { - pins = "PH5"; - function = "gpio_out"; - }; -}; - &r_ir { status = "okay"; }; -&r_pio { - led_r_pins_optimus: led-pins@1 { - pins = "PM15"; - function = "gpio_out"; - }; - - wifi_en_pin_optimus: wifi_en_pin@0 { - pins = "PL2"; - function = "gpio_out"; - }; -}; - &r_rsb { status = "okay"; @@ -492,7 +450,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 759a72317eb8f0b2c98156deadaf6773f4c9cb7e..90eac0b2a1938aac9a3935c88dbed007678e6425 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -42,8 +42,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton64.dtsi" - #include #include @@ -54,6 +52,8 @@ #include / { + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&gic>; cpus { @@ -109,11 +109,6 @@ }; }; - memory { - /* 8GB max. with LPAE */ - reg = <0 0x20000000 0x02 0>; - }; - timer { compatible = "arm,armv7-timer"; interrupts = , @@ -144,7 +139,7 @@ * would also throw all the PLL clock rates off, or just the * downstream clocks in the PRCM. */ - osc24M: osc24M_clk { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -156,7 +151,7 @@ * AC100 codec/RTC chip. This serves as a placeholder for * board dts files to specify the source. */ - osc32k: osc32k_clk { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <1>; @@ -164,7 +159,7 @@ clock-output-names = "osc32k"; }; - cpus_clk: clk@08001410 { + cpus_clk: clk@8001410 { compatible = "allwinner,sun9i-a80-cpus-clk"; reg = <0x08001410 0x4>; #clock-cells = <0>; @@ -174,7 +169,7 @@ clock-output-names = "cpus"; }; - ahbs: ahbs_clk { + ahbs: clk-ahbs { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; @@ -183,7 +178,7 @@ clock-output-names = "ahbs"; }; - apbs: clk@0800141c { + apbs: clk@800141c { compatible = "allwinner,sun8i-a23-apb0-clk"; reg = <0x0800141c 0x4>; #clock-cells = <0>; @@ -191,7 +186,7 @@ clock-output-names = "apbs"; }; - apbs_gates: clk@08001428 { + apbs_gates: clk@8001428 { compatible = "allwinner,sun9i-a80-apbs-gates-clk"; reg = <0x08001428 0x4>; #clock-cells = <1>; @@ -212,7 +207,7 @@ "apbs_i2s1", "apbs_twd"; }; - r_1wire_clk: clk@08001450 { + r_1wire_clk: clk@8001450 { reg = <0x08001450 0x4>; #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -220,7 +215,7 @@ clock-output-names = "r_1wire"; }; - r_ir_clk: clk@08001454 { + r_ir_clk: clk@8001454 { reg = <0x08001454 0x4>; #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -239,7 +234,7 @@ */ ranges = <0 0 0 0x20000000>; - ehci0: usb@00a00000 { + ehci0: usb@a00000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a00000 0x100>; interrupts = ; @@ -250,7 +245,7 @@ status = "disabled"; }; - ohci0: usb@00a00400 { + ohci0: usb@a00400 { compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; reg = <0x00a00400 0x100>; interrupts = ; @@ -262,7 +257,7 @@ status = "disabled"; }; - usbphy1: phy@00a00800 { + usbphy1: phy@a00800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a00800 0x4>; clocks = <&usb_clocks CLK_USB0_PHY>; @@ -273,7 +268,7 @@ #phy-cells = <0>; }; - ehci1: usb@00a01000 { + ehci1: usb@a01000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a01000 0x100>; interrupts = ; @@ -284,7 +279,7 @@ status = "disabled"; }; - usbphy2: phy@00a01800 { + usbphy2: phy@a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; clocks = <&usb_clocks CLK_USB1_HSIC>, @@ -303,7 +298,7 @@ phy_type = "hsic"; }; - ehci2: usb@00a02000 { + ehci2: usb@a02000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a02000 0x100>; interrupts = ; @@ -314,7 +309,7 @@ status = "disabled"; }; - ohci2: usb@00a02400 { + ohci2: usb@a02400 { compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; reg = <0x00a02400 0x100>; interrupts = ; @@ -326,7 +321,7 @@ status = "disabled"; }; - usbphy3: phy@00a02800 { + usbphy3: phy@a02800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a02800 0x4>; clocks = <&usb_clocks CLK_USB2_HSIC>, @@ -343,7 +338,7 @@ #phy-cells = <0>; }; - usb_clocks: clock@00a08000 { + usb_clocks: clock@a08000 { compatible = "allwinner,sun9i-a80-usb-clks"; reg = <0x00a08000 0x8>; clocks = <&ccu CLK_BUS_USB>, <&osc24M>; @@ -352,7 +347,7 @@ #reset-cells = <1>; }; - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>, @@ -367,7 +362,7 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c10000 0x1000>; clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>, @@ -382,7 +377,7 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c11000 0x1000>; clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>, @@ -397,7 +392,7 @@ #size-cells = <0>; }; - mmc3: mmc@01c12000 { + mmc3: mmc@1c12000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c12000 0x1000>; clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>, @@ -412,7 +407,7 @@ #size-cells = <0>; }; - mmc_config_clk: clk@01c13000 { + mmc_config_clk: clk@1c13000 { compatible = "allwinner,sun9i-a80-mmc-config-clk"; reg = <0x01c13000 0x10>; clocks = <&ccu CLK_BUS_MMC>; @@ -425,7 +420,7 @@ "mmc2_config", "mmc3_config"; }; - gic: interrupt-controller@01c41000 { + gic: interrupt-controller@1c41000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c41000 0x1000>, <0x01c42000 0x2000>, @@ -436,7 +431,7 @@ interrupts = ; }; - de_clocks: clock@03000000 { + de_clocks: clock@3000000 { compatible = "allwinner,sun9i-a80-de-clks"; reg = <0x03000000 0x30>; clocks = <&ccu CLK_DE>, @@ -450,7 +445,7 @@ #reset-cells = <1>; }; - ccu: clock@06000000 { + ccu: clock@6000000 { compatible = "allwinner,sun9i-a80-ccu"; reg = <0x06000000 0x800>; clocks = <&osc24M>, <&osc32k>; @@ -459,7 +454,7 @@ #reset-cells = <1>; }; - timer@06000c00 { + timer@6000c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x06000c00 0xa0>; interrupts = , @@ -472,13 +467,13 @@ clocks = <&osc24M>; }; - wdt: watchdog@06000ca0 { + wdt: watchdog@6000ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x06000ca0 0x20>; interrupts = ; }; - pio: pinctrl@06000800 { + pio: pinctrl@6000800 { compatible = "allwinner,sun9i-a80-pinctrl"; reg = <0x06000800 0x400>; interrupts = , @@ -494,12 +489,12 @@ #size-cells = <0>; #gpio-cells = <3>; - i2c3_pins_a: i2c3@0 { + i2c3_pins: i2c3-pins { pins = "PG10", "PG11"; function = "i2c3"; }; - mmc0_pins: mmc0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1" ,"PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -507,7 +502,7 @@ bias-pull-up; }; - mmc1_pins: mmc1 { + mmc1_pins: mmc1-pins { pins = "PG0", "PG1" ,"PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -515,7 +510,7 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2_8bit { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", @@ -525,18 +520,18 @@ bias-pull-up; }; - uart0_pins_a: uart0@0 { + uart0_ph_pins: uart0-ph-pins { pins = "PH12", "PH13"; function = "uart0"; }; - uart4_pins_a: uart4@0 { + uart4_pins: uart4-pins { pins = "PG12", "PG13", "PG14", "PG15"; function = "uart4"; }; }; - uart0: serial@07000000 { + uart0: serial@7000000 { compatible = "snps,dw-apb-uart"; reg = <0x07000000 0x400>; interrupts = ; @@ -547,7 +542,7 @@ status = "disabled"; }; - uart1: serial@07000400 { + uart1: serial@7000400 { compatible = "snps,dw-apb-uart"; reg = <0x07000400 0x400>; interrupts = ; @@ -558,7 +553,7 @@ status = "disabled"; }; - uart2: serial@07000800 { + uart2: serial@7000800 { compatible = "snps,dw-apb-uart"; reg = <0x07000800 0x400>; interrupts = ; @@ -569,7 +564,7 @@ status = "disabled"; }; - uart3: serial@07000c00 { + uart3: serial@7000c00 { compatible = "snps,dw-apb-uart"; reg = <0x07000c00 0x400>; interrupts = ; @@ -580,7 +575,7 @@ status = "disabled"; }; - uart4: serial@07001000 { + uart4: serial@7001000 { compatible = "snps,dw-apb-uart"; reg = <0x07001000 0x400>; interrupts = ; @@ -591,7 +586,7 @@ status = "disabled"; }; - uart5: serial@07001400 { + uart5: serial@7001400 { compatible = "snps,dw-apb-uart"; reg = <0x07001400 0x400>; interrupts = ; @@ -602,7 +597,7 @@ status = "disabled"; }; - i2c0: i2c@07002800 { + i2c0: i2c@7002800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002800 0x400>; interrupts = ; @@ -613,7 +608,7 @@ #size-cells = <0>; }; - i2c1: i2c@07002c00 { + i2c1: i2c@7002c00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002c00 0x400>; interrupts = ; @@ -624,7 +619,7 @@ #size-cells = <0>; }; - i2c2: i2c@07003000 { + i2c2: i2c@7003000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003000 0x400>; interrupts = ; @@ -635,7 +630,7 @@ #size-cells = <0>; }; - i2c3: i2c@07003400 { + i2c3: i2c@7003400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003400 0x400>; interrupts = ; @@ -646,7 +641,7 @@ #size-cells = <0>; }; - i2c4: i2c@07003800 { + i2c4: i2c@7003800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003800 0x400>; interrupts = ; @@ -657,19 +652,19 @@ #size-cells = <0>; }; - r_wdt: watchdog@08001000 { + r_wdt: watchdog@8001000 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x08001000 0x20>; interrupts = ; }; - apbs_rst: reset@080014b0 { + apbs_rst: reset@80014b0 { reg = <0x080014b0 0x4>; compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; - nmi_intc: interrupt-controller@080015a0 { + nmi_intc: interrupt-controller@80015a0 { compatible = "allwinner,sun9i-a80-nmi"; interrupt-controller; #interrupt-cells = <2>; @@ -677,7 +672,7 @@ interrupts = ; }; - r_ir: ir@08002000 { + r_ir: ir@8002000 { compatible = "allwinner,sun5i-a13-ir"; interrupts = ; pinctrl-names = "default"; @@ -689,7 +684,7 @@ status = "disabled"; }; - r_uart: serial@08002800 { + r_uart: serial@8002800 { compatible = "snps,dw-apb-uart"; reg = <0x08002800 0x400>; interrupts = ; @@ -700,7 +695,7 @@ status = "disabled"; }; - r_pio: pinctrl@08002c00 { + r_pio: pinctrl@8002c00 { compatible = "allwinner,sun9i-a80-r-pinctrl"; reg = <0x08002c00 0x400>; interrupts = , @@ -713,12 +708,12 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - r_ir_pins: r_ir { + r_ir_pins: r-ir-pins { pins = "PL6"; function = "s_cir_rx"; }; - r_rsb_pins: r_rsb { + r_rsb_pins: r-rsb-pins { pins = "PN0", "PN1"; function = "s_rsb"; drive-strength = <20>; @@ -726,7 +721,7 @@ }; }; - r_rsb: i2c@08003400 { + r_rsb: i2c@8003400 { compatible = "allwinner,sun8i-a23-rsb"; reg = <0x08003400 0x400>; interrupts = ; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 11240a8313c266a33ec7ad1233aca2a976d4af3f..8d40c00d64bb39a893d2f74c3d859ea42db59589 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -91,7 +91,7 @@ reg = <0x01c00000 0x1000>; }; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; interrupts = ; @@ -100,7 +100,7 @@ #dma-cells = <1>; }; - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { /* compatible and clocks are in per SoC .dtsi file */ reg = <0x01c0f000 0x1000>; resets = <&ccu RST_BUS_MMC0>; @@ -111,7 +111,7 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { /* compatible and clocks are in per SoC .dtsi file */ reg = <0x01c10000 0x1000>; resets = <&ccu RST_BUS_MMC1>; @@ -122,7 +122,7 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { /* compatible and clocks are in per SoC .dtsi file */ reg = <0x01c11000 0x1000>; resets = <&ccu RST_BUS_MMC2>; @@ -133,7 +133,7 @@ #size-cells = <0>; }; - usb_otg: usb@01c19000 { + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x400>; clocks = <&ccu CLK_BUS_OTG>; @@ -146,7 +146,7 @@ status = "disabled"; }; - usbphy: phy@01c19400 { + usbphy: phy@1c19400 { compatible = "allwinner,sun8i-h3-usb-phy"; reg = <0x01c19400 0x2c>, <0x01c1a800 0x4>, @@ -178,7 +178,7 @@ #phy-cells = <1>; }; - ehci0: usb@01c1a000 { + ehci0: usb@1c1a000 { compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; interrupts = ; @@ -187,7 +187,7 @@ status = "disabled"; }; - ohci0: usb@01c1a400 { + ohci0: usb@1c1a400 { compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1a400 0x100>; interrupts = ; @@ -197,7 +197,7 @@ status = "disabled"; }; - ehci1: usb@01c1b000 { + ehci1: usb@1c1b000 { compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; interrupts = ; @@ -208,7 +208,7 @@ status = "disabled"; }; - ohci1: usb@01c1b400 { + ohci1: usb@1c1b400 { compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1b400 0x100>; interrupts = ; @@ -220,7 +220,7 @@ status = "disabled"; }; - ehci2: usb@01c1c000 { + ehci2: usb@1c1c000 { compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; interrupts = ; @@ -231,7 +231,7 @@ status = "disabled"; }; - ohci2: usb@01c1c400 { + ohci2: usb@1c1c400 { compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = ; @@ -243,7 +243,7 @@ status = "disabled"; }; - ehci3: usb@01c1d000 { + ehci3: usb@1c1d000 { compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1d000 0x100>; interrupts = ; @@ -254,7 +254,7 @@ status = "disabled"; }; - ohci3: usb@01c1d400 { + ohci3: usb@1c1d400 { compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1d400 0x100>; interrupts = ; @@ -266,7 +266,7 @@ status = "disabled"; }; - ccu: clock@01c20000 { + ccu: clock@1c20000 { /* compatible is in per SoC .dtsi file */ reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; @@ -275,7 +275,7 @@ #reset-cells = <1>; }; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { /* compatible is in per SoC .dtsi file */ reg = <0x01c20800 0x400>; interrupts = , @@ -310,7 +310,7 @@ function = "i2c2"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins_a: mmc0 { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -318,13 +318,13 @@ bias-pull-up; }; - mmc0_cd_pin: mmc0_cd_pin@0 { + mmc0_cd_pin: mmc0_cd_pin { pins = "PF6"; function = "gpio_in"; bias-pull-up; }; - mmc1_pins_a: mmc1@0 { + mmc1_pins_a: mmc1 { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -342,7 +342,7 @@ bias-pull-up; }; - spdif_tx_pins_a: spdif@0 { + spdif_tx_pins_a: spdif { pins = "PA17"; function = "spdif"; }; @@ -357,7 +357,7 @@ function = "spi1"; }; - uart0_pins_a: uart0@0 { + uart0_pins_a: uart0 { pins = "PA4", "PA5"; function = "uart0"; }; @@ -381,9 +381,14 @@ pins = "PA13", "PA14"; function = "uart3"; }; + + uart3_rts_cts_pins: uart3_rts_cts { + pins = "PA15", "PA16"; + function = "uart3"; + }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = , @@ -391,7 +396,56 @@ clocks = <&osc24M>; }; - spi0: spi@01c68000 { + emac: ethernet@1c30000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c30000 0x10000>; + interrupts = ; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + /* Only one MDIO is usable at the time */ + internal_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + int_mii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + + external_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; interrupts = ; @@ -407,7 +461,7 @@ #size-cells = <0>; }; - spi1: spi@01c69000 { + spi1: spi@1c69000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c69000 0x1000>; interrupts = ; @@ -423,13 +477,13 @@ #size-cells = <0>; }; - wdt0: watchdog@01c20ca0 { + wdt0: watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = ; }; - spdif: spdif@01c21000 { + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-h3-spdif"; reg = <0x01c21000 0x400>; @@ -442,7 +496,7 @@ status = "disabled"; }; - pwm: pwm@01c21400 { + pwm: pwm@1c21400 { compatible = "allwinner,sun8i-h3-pwm"; reg = <0x01c21400 0x8>; clocks = <&osc24M>; @@ -450,7 +504,33 @@ status = "disabled"; }; - codec: codec@01c22c00 { + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-i2s"; + reg = <0x01c22000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + dmas = <&dma 3>, <&dma 3>; + resets = <&ccu RST_BUS_I2S0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s1: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-i2s"; + reg = <0x01c22400 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; + clock-names = "apb", "mod"; + dmas = <&dma 4>, <&dma 4>; + resets = <&ccu RST_BUS_I2S1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-h3-codec"; reg = <0x01c22c00 0x400>; @@ -464,7 +544,7 @@ status = "disabled"; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; @@ -477,7 +557,7 @@ status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; @@ -490,7 +570,7 @@ status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; @@ -503,7 +583,7 @@ status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = ; @@ -516,7 +596,7 @@ status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; @@ -529,7 +609,7 @@ #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; @@ -542,9 +622,9 @@ #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b000 0x400>; + reg = <0x01c2b400 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; @@ -555,7 +635,7 @@ #size-cells = <0>; }; - gic: interrupt-controller@01c81000 { + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, @@ -566,7 +646,7 @@ interrupts = ; }; - rtc: rtc@01f00000 { + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = , @@ -583,12 +663,12 @@ #reset-cells = <1>; }; - codec_analog: codec-analog@01f015c0 { + codec_analog: codec-analog@1f015c0 { compatible = "allwinner,sun8i-h3-codec-analog"; reg = <0x01f015c0 0x4>; }; - ir: ir@01f02000 { + ir: ir@1f02000 { compatible = "allwinner,sun5i-a13-ir"; clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; clock-names = "apb", "ir"; @@ -598,7 +678,7 @@ status = "disabled"; }; - r_pio: pinctrl@01f02c00 { + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = ; @@ -609,7 +689,7 @@ interrupt-controller; #interrupt-cells = <3>; - ir_pins_a: ir@0 { + ir_pins_a: ir { pins = "PL11"; function = "s_cir_rx"; }; diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi index 2565d5137a17e300c4f9274277303d5626e761f2..ddf4e722ea93775ee7ac240a1442dc9432880e9e 100644 --- a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi +++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi @@ -65,8 +65,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -75,8 +73,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi index 12ab6e0c033149239c7476c8ea60262c697837d5..0ec1b0a317b4c4631d4cfe5d9d451e9d16c697de 100644 --- a/arch/arm/boot/dts/tango4-common.dtsi +++ b/arch/arm/boot/dts/tango4-common.dtsi @@ -160,7 +160,7 @@ #address-cells = <1>; #size-cells = <1>; - irq0: irq0@000 { + irq0: irq0@0 { reg = <0x000 0x100>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index e8e777b8ef1b33658f773b36fe0b064b15121d3c..d112f85e66ed530b14f66ed6d0c50f107d4f2a65 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -68,6 +68,10 @@ }; }; + cec@70015000 { + status = "okay"; + }; + gpu@0,57000000 { /* * Node left disabled on purpose - the bootloader will enable diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index a7e43dcbf74443738749512081edde1ff4738d14..174092bfac908ca0c359f756d165c26b8cef6ff1 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -125,7 +125,7 @@ nvidia,head = <1>; }; - hdmi@54280000 { + hdmi: hdmi@54280000 { compatible = "nvidia,tegra124-hdmi"; reg = <0x0 0x54280000 0x0 0x00040000>; interrupts = ; @@ -853,6 +853,16 @@ status = "disabled"; }; + cec@70015000 { + compatible = "nvidia,tegra124-cec"; + reg = <0x0 0x70015000 0x0 0x00001000>; + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_CEC>; + clock-names = "cec"; + status = "disabled"; + hdmi-phandle = <&hdmi>; + }; + soctherm: thermal-sensor@700e2000 { compatible = "nvidia,tegra124-soctherm"; reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index b3aaab354f3e0e8ff842db3549f865e7c1c60e10..0056852c4fb0a20a6396a7de2d1b45db1776c72c 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -38,7 +38,7 @@ }; ðsc { - interrupts = <0 49 4>; + interrupts = <1 8>; }; &serial0 { @@ -53,6 +53,14 @@ status = "okay"; }; +&gpio { + xirq1 { + gpio-hog; + gpios = <121 0>; + input; + }; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index 93586faf950f1bff750fe9821e4b7d1c60766fc7..01fc3e16e2bd5adae80f8a42d17a6b4d039c85d7 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -37,7 +37,7 @@ clock-frequency = <24576000>; }; - arm_timer_clk: arm_timer_clk { + arm_timer_clk: arm-timer { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; @@ -71,6 +71,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; + resets = <&peri_rst 0>; }; serial1: serial@54006900 { @@ -81,6 +82,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; + resets = <&peri_rst 1>; }; serial2: serial@54006a00 { @@ -91,6 +93,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; + resets = <&peri_rst 2>; }; serial3: serial@54006b00 { @@ -101,6 +104,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; + resets = <&peri_rst 3>; + }; + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <136>; + socionext,interrupt-ranges = <0 48 13>, <14 62 2>; }; i2c0: i2c@58400000 { @@ -113,6 +131,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; + resets = <&peri_rst 4>; clock-frequency = <100000>; }; @@ -126,6 +145,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; + resets = <&peri_rst 5>; clock-frequency = <100000>; }; @@ -139,6 +159,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; + resets = <&peri_rst 6>; clock-frequency = <400000>; }; @@ -152,6 +173,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; + resets = <&peri_rst 7>; clock-frequency = <100000>; }; @@ -305,6 +327,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; clocks = <&sys_clk 2>; + resets = <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 2188d114d79b06c9b9b1bfde5d8cee1bc82e02df..0e510a725976e38cf928d2edba5b46ac7a937fff 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -40,7 +40,7 @@ }; ðsc { - interrupts = <0 52 4>; + interrupts = <4 8>; }; &serial0 { @@ -55,6 +55,14 @@ status = "okay"; }; +&gpio { + xirq4 { + gpio-hog; + gpios = <124 0>; + input; + }; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index be82cddc407245b82cfde6b02cbcc970576e6e0d..de481c372467a75ba49b7631ba95bed22fa95190 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -8,117 +8,117 @@ */ &pinctrl { - pinctrl_aout: aout_grp { + pinctrl_aout: aout { groups = "aout"; function = "aout"; }; - pinctrl_emmc: emmc_grp { + pinctrl_emmc: emmc { groups = "emmc", "emmc_dat8"; function = "emmc"; }; - pinctrl_ether_mii: ether_mii_grp { + pinctrl_ether_mii: ether-mii { groups = "ether_mii"; function = "ether_mii"; }; - pinctrl_ether_rgmii: ether_rgmii_grp { + pinctrl_ether_rgmii: ether-rgmii { groups = "ether_rgmii"; function = "ether_rgmii"; }; - pinctrl_ether_rmii: ether_rmii_grp { + pinctrl_ether_rmii: ether-rmii { groups = "ether_rmii"; function = "ether_rmii"; }; - pinctrl_i2c0: i2c0_grp { + pinctrl_i2c0: i2c0 { groups = "i2c0"; function = "i2c0"; }; - pinctrl_i2c1: i2c1_grp { + pinctrl_i2c1: i2c1 { groups = "i2c1"; function = "i2c1"; }; - pinctrl_i2c2: i2c2_grp { + pinctrl_i2c2: i2c2 { groups = "i2c2"; function = "i2c2"; }; - pinctrl_i2c3: i2c3_grp { + pinctrl_i2c3: i2c3 { groups = "i2c3"; function = "i2c3"; }; - pinctrl_i2c4: i2c4_grp { + pinctrl_i2c4: i2c4 { groups = "i2c4"; function = "i2c4"; }; - pinctrl_nand: nand_grp { + pinctrl_nand: nand { groups = "nand"; function = "nand"; }; - pinctrl_nand2cs: nand2cs_grp { + pinctrl_nand2cs: nand2cs { groups = "nand", "nand_cs1"; function = "nand"; }; - pinctrl_sd: sd_grp { + pinctrl_sd: sd { groups = "sd"; function = "sd"; }; - pinctrl_sd1: sd1_grp { + pinctrl_sd1: sd1 { groups = "sd1"; function = "sd1"; }; - pinctrl_system_bus: system_bus_grp { + pinctrl_system_bus: system-bus { groups = "system_bus", "system_bus_cs1"; function = "system_bus"; }; - pinctrl_uart0: uart0_grp { + pinctrl_uart0: uart0 { groups = "uart0"; function = "uart0"; }; - pinctrl_uart1: uart1_grp { + pinctrl_uart1: uart1 { groups = "uart1"; function = "uart1"; }; - pinctrl_uart2: uart2_grp { + pinctrl_uart2: uart2 { groups = "uart2"; function = "uart2"; }; - pinctrl_uart3: uart3_grp { + pinctrl_uart3: uart3 { groups = "uart3"; function = "uart3"; }; - pinctrl_usb0: usb0_grp { + pinctrl_usb0: usb0 { groups = "usb0"; function = "usb0"; }; - pinctrl_usb1: usb1_grp { + pinctrl_usb1: usb1 { groups = "usb1"; function = "usb1"; }; - pinctrl_usb2: usb2_grp { + pinctrl_usb2: usb2 { groups = "usb2"; function = "usb2"; }; - pinctrl_usb3: usb3_grp { + pinctrl_usb3: usb3 { groups = "usb3"; function = "usb3"; }; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 903df6348e77db51d2bcc86d2aa1d32a0cf3dece..be99467ac6bb9b0cc4e39f1bbb32d79d046cf5f5 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -40,7 +40,7 @@ }; ðsc { - interrupts = <0 50 4>; + interrupts = <2 8>; }; &serial0 { @@ -55,6 +55,14 @@ status = "okay"; }; +&gpio { + xirq2 { + gpio-hog; + gpios = <122 0>; + input; + }; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 2a9bd7f9f5db3d43b1896162048e95faea18f299..7955c3a49e659695f1526b024192c8c13a31a138 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -45,7 +45,7 @@ clock-frequency = <25000000>; }; - arm_timer_clk: arm_timer_clk { + arm_timer_clk: arm-timer { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; @@ -79,6 +79,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; + resets = <&peri_rst 0>; }; serial1: serial@54006900 { @@ -89,6 +90,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; + resets = <&peri_rst 1>; }; serial2: serial@54006a00 { @@ -99,6 +101,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; + resets = <&peri_rst 2>; }; serial3: serial@54006b00 { @@ -109,6 +112,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; + resets = <&peri_rst 3>; + }; + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <248>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>; }; i2c0: i2c@58780000 { @@ -121,6 +139,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; + resets = <&peri_rst 4>; clock-frequency = <100000>; }; @@ -134,6 +153,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; + resets = <&peri_rst 5>; clock-frequency = <100000>; }; @@ -147,6 +167,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; + resets = <&peri_rst 6>; clock-frequency = <100000>; }; @@ -160,6 +181,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; + resets = <&peri_rst 7>; clock-frequency = <100000>; }; @@ -173,6 +195,7 @@ #size-cells = <0>; interrupts = <0 25 4>; clocks = <&peri_clk 9>; + resets = <&peri_rst 9>; clock-frequency = <400000>; }; @@ -184,6 +207,7 @@ #size-cells = <0>; interrupts = <0 26 4>; clocks = <&peri_clk 10>; + resets = <&peri_rst 10>; clock-frequency = <400000>; }; @@ -324,6 +348,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clocks = <&sys_clk 2>; + resets = <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index b026bcd42a069351b1786959be0af090eaef21d3..6589b8a2c65c7766d850e1625ba201065aa9f760 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -37,7 +37,7 @@ }; }; - cpu_opp: opp_table { + cpu_opp: opp-table { compatible = "operating-points-v2"; opp-shared; @@ -119,7 +119,7 @@ clock-frequency = <20000000>; }; - arm_timer_clk: arm_timer_clk { + arm_timer_clk: arm-timer { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; @@ -166,6 +166,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; + resets = <&peri_rst 0>; }; serial1: serial@54006900 { @@ -176,6 +177,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; + resets = <&peri_rst 1>; }; serial2: serial@54006a00 { @@ -186,6 +188,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; + resets = <&peri_rst 2>; }; serial3: serial@54006b00 { @@ -196,6 +199,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; + resets = <&peri_rst 3>; + }; + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <248>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>; }; i2c0: i2c@58780000 { @@ -208,6 +226,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; + resets = <&peri_rst 4>; clock-frequency = <100000>; }; @@ -221,6 +240,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; + resets = <&peri_rst 5>; clock-frequency = <100000>; }; @@ -234,6 +254,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; + resets = <&peri_rst 6>; clock-frequency = <100000>; }; @@ -247,6 +268,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; + resets = <&peri_rst 7>; clock-frequency = <100000>; }; @@ -260,6 +282,7 @@ #size-cells = <0>; interrupts = <0 25 4>; clocks = <&peri_clk 9>; + resets = <&peri_rst 9>; clock-frequency = <400000>; }; @@ -271,6 +294,7 @@ #size-cells = <0>; interrupts = <0 26 4>; clocks = <&peri_clk 10>; + resets = <&peri_rst 10>; clock-frequency = <400000>; }; @@ -385,6 +409,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; clocks = <&sys_clk 2>; + resets = <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 90b020c950837d5d0c9d2a43d74d4a2c208b7463..d82d6d8721319a462086cfb5d2330c5e9e12118d 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -7,6 +7,8 @@ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include + / { compatible = "socionext,uniphier-pxs2"; #address-cells = <1>; @@ -16,7 +18,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; @@ -24,9 +26,10 @@ enable-method = "psci"; next-level-cache = <&l2>; operating-points-v2 = <&cpu_opp>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; @@ -36,7 +39,7 @@ operating-points-v2 = <&cpu_opp>; }; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; @@ -46,7 +49,7 @@ operating-points-v2 = <&cpu_opp>; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; @@ -57,7 +60,7 @@ }; }; - cpu_opp: opp_table { + cpu_opp: opp-table { compatible = "operating-points-v2"; opp-shared; @@ -107,13 +110,42 @@ clock-frequency = <25000000>; }; - arm_timer_clk: arm_timer_clk { + arm_timer_clk: arm-timer { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; }; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; /* 250ms */ + polling-delay = <1000>; /* 1000ms */ + thermal-sensors = <&pvtctl>; + + trips { + cpu_crit: cpu-crit { + temperature = <95000>; /* 95C */ + hysteresis = <2000>; + type = "critical"; + }; + cpu_alert: cpu-alert { + temperature = <85000>; /* 85C */ + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map { + trip = <&cpu_alert>; + cooling-device = <&cpu0 + THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -141,6 +173,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; + resets = <&peri_rst 0>; }; serial1: serial@54006900 { @@ -151,6 +184,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; + resets = <&peri_rst 1>; }; serial2: serial@54006a00 { @@ -161,6 +195,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; + resets = <&peri_rst 2>; }; serial3: serial@54006b00 { @@ -171,6 +206,24 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; + resets = <&peri_rst 3>; + }; + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 96 0 0>; + gpio-ranges-group-names = "gpio_range0", + "gpio_range1"; + ngpios = <232>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>, + <21 217 3>; }; i2c0: i2c@58780000 { @@ -183,6 +236,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; + resets = <&peri_rst 4>; clock-frequency = <100000>; }; @@ -196,6 +250,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; + resets = <&peri_rst 5>; clock-frequency = <100000>; }; @@ -209,6 +264,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; + resets = <&peri_rst 6>; clock-frequency = <100000>; }; @@ -222,6 +278,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; + resets = <&peri_rst 7>; clock-frequency = <100000>; }; @@ -233,6 +290,7 @@ #size-cells = <0>; interrupts = <0 45 4>; clocks = <&peri_clk 8>; + resets = <&peri_rst 8>; clock-frequency = <400000>; }; @@ -244,6 +302,7 @@ #size-cells = <0>; interrupts = <0 25 4>; clocks = <&peri_clk 9>; + resets = <&peri_rst 9>; clock-frequency = <400000>; }; @@ -255,6 +314,7 @@ #size-cells = <0>; interrupts = <0 26 4>; clocks = <&peri_clk 10>; + resets = <&peri_rst 10>; clock-frequency = <400000>; }; @@ -358,6 +418,13 @@ compatible = "socionext,uniphier-pxs2-reset"; #reset-cells = <1>; }; + + pvtctl: pvtctl { + compatible = "socionext,uniphier-pxs2-thermal"; + interrupts = <0 3 4>; + #thermal-sensor-cells = <0>; + socionext,tmod-calibration = <0x0f86 0x6844>; + }; }; nand: nand@68000000 { @@ -369,6 +436,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; clocks = <&sys_clk 2>; + resets = <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index 5accd3cc76e4aaee7471f0ce7542bfc7eb6d1ac9..1c0e7077a5609920323b356712b59cd6e51c75fb 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -38,7 +38,7 @@ }; ðsc { - interrupts = <0 48 4>; + interrupts = <0 8>; }; &serial0 { @@ -53,6 +53,14 @@ status = "okay"; }; +&gpio { + xirq0 { + gpio-hog; + gpios = <120 0>; + input; + }; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index ebd0c3f63e7fb6bf05d8e775367e6572f8931318..71885366cd238339f1ddc03ae3010c4052806ce8 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -37,7 +37,7 @@ clock-frequency = <25000000>; }; - arm_timer_clk: arm_timer_clk { + arm_timer_clk: arm-timer { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; @@ -71,6 +71,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; + resets = <&peri_rst 0>; }; serial1: serial@54006900 { @@ -81,6 +82,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; + resets = <&peri_rst 1>; }; serial2: serial@54006a00 { @@ -91,6 +93,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; + resets = <&peri_rst 2>; }; serial3: serial@54006b00 { @@ -101,6 +104,25 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; + resets = <&peri_rst 3>; + }; + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 104 0 0>, + <&pinctrl 112 0 0>; + gpio-ranges-group-names = "gpio_range0", + "gpio_range1", + "gpio_range2"; + ngpios = <136>; + socionext,interrupt-ranges = <0 48 13>, <14 62 2>; }; i2c0: i2c@58400000 { @@ -113,6 +135,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; + resets = <&peri_rst 4>; clock-frequency = <100000>; }; @@ -126,6 +149,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; + resets = <&peri_rst 5>; clock-frequency = <100000>; }; @@ -139,6 +163,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; + resets = <&peri_rst 6>; clock-frequency = <400000>; }; @@ -152,6 +177,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; + resets = <&peri_rst 7>; clock-frequency = <100000>; }; @@ -305,6 +331,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; clocks = <&sys_clk 2>; + resets = <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi index 6c825f192e659354be7f066535ed08c28450961f..e4e7e1bb91720ccc10aa564365bfd1f164433921 100644 --- a/arch/arm/boot/dts/uniphier-support-card.dtsi +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -11,11 +11,12 @@ status = "okay"; ranges = <1 0x00000000 0x42000000 0x02000000>; - support_card: support_card@1,1f00000 { + support_card: support-card@1,1f00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 1 0x01f00000 0x00100000>; + interrupt-parent = <&gpio>; ethsc: ethernet@0 { compatible = "smsc,lan9118", "smsc,lan9115"; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 482381c1c9622832d2ab438c2f38e3d5770fd136..7b1125be99c467221f442122073afb1b15ac34e8 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -128,7 +128,7 @@ }; }; - usb0: ohci@00a00000 { + usb0: ohci@a00000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi index 088c2c3685ab7bf3d65367c0662d226980cbb44e..81c3fe0465d95cb645d8e26177c6858db1dc52c5 100644 --- a/arch/arm/boot/dts/usb_a9g20_common.dtsi +++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi @@ -20,8 +20,8 @@ }; i2c-gpio-0 { - rv3029c2@56 { - compatible = "rv3029c2"; + rtc@56 { + compatible = "microcrystal,rv3029"; reg = <0x56>; }; }; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 53e3b8b250c6baa9ad81aaff3cfc6bb3cd67d10e..6f787e67bd2eacfb52944e6d47a39e46595e7b65 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -198,7 +198,7 @@ pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { #sound-dai-cells = <0>; compatible = "fsl,sgtl5000"; reg = <0x0a>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index db3b408ea55afee6a96530585fbda8a3c6f3fad2..4b8edc8982cf156931177b0ecce0f6b9329afce3 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -121,7 +121,7 @@ switch0port10: port@10 { reg = <10>; label = "dsa"; - phy-mode = "xgmii"; + phy-mode = "xaui"; link = <&switch1port10>; }; }; @@ -208,7 +208,7 @@ switch1port10: port@10 { reg = <10>; label = "dsa"; - phy-mode = "xgmii"; + phy-mode = "xaui"; link = <&switch0port10>; }; }; @@ -359,7 +359,7 @@ }; &i2c1 { - at24mac602@00 { + at24mac602@50 { compatible = "atmel,24c02"; reg = <0x50>; read-only; diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi index 752d28e0f9b0181b5dd2d52cbb02e55b9ec9e63f..8a74efdb636062e28e309e130f557e5bc582d65f 100644 --- a/arch/arm/boot/dts/zx296702.dtsi +++ b/arch/arm/boot/dts/zx296702.dtsi @@ -38,7 +38,7 @@ reg = <0x00400000 0x1000>; }; - intc: interrupt-controller@00801000 { + intc: interrupt-controller@801000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; #address-cells = <1>; @@ -48,7 +48,7 @@ <0x00800100 0x100>; }; - global_timer: timer@008000200 { + global_timer: timer@8000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x00800200 0x20>; interrupts = ; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 34e8277fce0d36a875cccb1278a9c016236b53d0..70a5de76b7db36a858a48cb82c2fd1e7fd94e95e 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -152,7 +152,7 @@ #size-cells = <0>; reg = <2>; eeprom@54 { - compatible = "at,24c08"; + compatible = "atmel,24c08"; reg = <0x54>; }; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 7ebc8c5ae39dce63ce99add3fea8e4eea121d924..cdc326ec333586da5650dd1894f07c2e64a80525 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -108,7 +108,7 @@ #size-cells = <0>; reg = <2>; eeprom@54 { - compatible = "at,24c08"; + compatible = "atmel,24c08"; reg = <0x54>; }; }; diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 27d9720f7207b89728cf908cea4441adddf2aaad..bd0cf22f9cebdc26b5075c84f8e5db9c3679a935 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -34,6 +34,7 @@ CONFIG_DAVINCI_MUX_WARNINGS=y CONFIG_DAVINCI_RESET_CLOCKS=y CONFIG_PREEMPT=y CONFIG_AEABI=y +CONFIG_CMA=y CONFIG_SECCOMP=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -56,9 +57,11 @@ CONFIG_NETFILTER=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set +CONFIG_DMA_CMA=y CONFIG_DA8XX_MSTPRI=y CONFIG_MTD=m CONFIG_MTD_TESTS=m +CONFIG_MTD_CMDLINE_PARTS=m CONFIG_MTD_BLOCK=m CONFIG_MTD_CFI=m CONFIG_MTD_CFI_INTELEXT=m @@ -195,7 +198,6 @@ CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y -# CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_DAVINCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 8c2a2619971b1e45326392cfdf31a0a3845790ed..f1d7834990ece60f33a2d6e18b794208d3ec73cc 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -244,7 +244,7 @@ CONFIG_USB_STORAGE_ONETOUCH=m CONFIG_USB_STORAGE_KARMA=m CONFIG_USB_STORAGE_CYPRESS_ATACB=m CONFIG_USB_STORAGE_ENE_UB6250=m -CONFIG_USB_UAS=m +CONFIG_USB_UAS=y CONFIG_USB_DWC3=y CONFIG_USB_DWC2=y CONFIG_USB_HSIC_USB3503=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 32acac9ab81aad5be59676e09aa4c422cb598d6e..0d4494922561b80c407b98c44f321021320cd168 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -250,6 +250,7 @@ CONFIG_IMX_IPUV3_CORE=y CONFIG_DRM=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_DW_HDMI_AHB_AUDIO=m +CONFIG_DRM_DW_HDMI_CEC=y CONFIG_DRM_IMX=y CONFIG_DRM_IMX_PARALLEL_DISPLAY=y CONFIG_DRM_IMX_TVE=y @@ -365,6 +366,7 @@ CONFIG_PWM=y CONFIG_PWM_FSL_FTM=y CONFIG_PWM_IMX=y CONFIG_NVMEM_IMX_OCOTP=y +CONFIG_MUX_MMIO=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index f907869e0ddcdf348da68b2d5f89f6d139003040..f710c192b33a2f2af800623f6515c0f80ffebbcd 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -189,6 +189,8 @@ CONFIG_KEYSTONE_NAVIGATOR_DMA=y CONFIG_TI_SCI_PM_DOMAINS=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=y +CONFIG_PWM=y +CONFIG_PWM_TIECAP=m CONFIG_KEYSTONE_IRQ=y CONFIG_RESET_TI_SCI=m CONFIG_RESET_TI_SYSCON=m diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index e15fa5f168bba0a72a1a26daf7e1c24dd4527138..0b54b4024e516137873852f3ea3117ec25e4ef4f 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -108,11 +108,11 @@ CONFIG_GPIO_MAX7300=y CONFIG_GPIO_MAX732X=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCF857X=y -CONFIG_GPIO_SX150X=y CONFIG_GPIO_74X164=y CONFIG_GPIO_MAX7301=y CONFIG_GPIO_MC33880=y CONFIG_PINCTRL_MCP23S08=y +CONFIG_PINCTRL_SX150X=y CONFIG_SENSORS_DS620=y CONFIG_SENSORS_MAX6639=y CONFIG_WATCHDOG=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 0cacdbf84a7170083c8900f0f83fb680ba861b08..61509c4b769ffeeecf1a9d9e4a97bac5a4ba6d9e 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -31,6 +31,7 @@ CONFIG_SOC_SAMA5D3=y CONFIG_SOC_SAMA5D4=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM_CYGNUS=y +CONFIG_ARCH_BCM_HR2=y CONFIG_ARCH_BCM_NSP=y CONFIG_ARCH_BCM_21664=y CONFIG_ARCH_BCM_281XX=y @@ -420,6 +421,7 @@ CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y +CONFIG_GPIO_UNIPHIER=y CONFIG_GPIO_XILINX=y CONFIG_GPIO_ZYNQ=y CONFIG_GPIO_PCA953X=y @@ -689,10 +691,12 @@ CONFIG_USB_OHCI_EXYNOS=m CONFIG_USB_R8A66597_HCD=m CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y +CONFIG_USB_UAS=m CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_SUNXI=m CONFIG_USB_DWC3=y CONFIG_USB_DWC2=y +CONFIG_USB_HSIC_USB3503=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y @@ -727,6 +731,7 @@ CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_ATMELMCI=y CONFIG_MMC_SDHCI_MSM=y +CONFIG_MMC_MESON_MX_SDIO=y CONFIG_MMC_MVSDIO=y CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y @@ -767,6 +772,7 @@ CONFIG_RTC_DRV_MAX8997=m CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_ST_LPC=y CONFIG_RTC_DRV_TWL4030=y @@ -849,6 +855,7 @@ CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_REMOTEPROC=m CONFIG_ST_REMOTEPROC=m +CONFIG_RPMSG_VIRTIO=m CONFIG_PM_DEVFREQ=y CONFIG_ARM_TEGRA_DEVFREQ=m CONFIG_MEMORY=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 879159e4ab58c9cecc9a6ada8b2a3cf6ce2b90ca..c784d04e2ab7fca3f787cc91e2dc9e5faa6af571 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -1,5 +1,4 @@ CONFIG_SYSVIPC=y -CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y @@ -28,9 +27,7 @@ CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCIE_QCOM=y CONFIG_SMP=y -CONFIG_HAVE_ARM_ARCH_TIMER=y CONFIG_PREEMPT=y -CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_CLEANCACHE=y CONFIG_ARM_APPENDED_DTB=y @@ -57,14 +54,13 @@ CONFIG_CFG80211=y CONFIG_RFKILL=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_QCOM_EBI2=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y +CONFIG_QCOM_COINCELL=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y @@ -87,6 +83,7 @@ CONFIG_SLIP_MODE_SLIP6=y CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_BRCMFMAC=m CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y @@ -98,12 +95,15 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_PM8XXX_VIBRATOR=y CONFIG_INPUT_PMIC8XXX_PWRKEY=y CONFIG_INPUT_UINPUT=y +CONFIG_RMI4_CORE=m +CONFIG_RMI4_I2C=m +CONFIG_RMI4_F11=y +CONFIG_RMI4_F12=y CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_MSM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_QUP=y @@ -121,11 +121,10 @@ CONFIG_PINCTRL_MSM8X74=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QCOM_SSBI_PMIC=y CONFIG_GPIOLIB=y -CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y -CONFIG_CHARGER_QCOM_SMBB=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y +CONFIG_CHARGER_QCOM_SMBB=y CONFIG_THERMAL=y CONFIG_QCOM_TSENS=y CONFIG_MFD_PM8XXX=y @@ -135,8 +134,14 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_QCOM_RPM=y CONFIG_REGULATOR_QCOM_SMD_RPM=y +CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_MEDIA_SUPPORT=y CONFIG_FB=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_LP855X=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_DYNAMIC_MINORS=y @@ -155,15 +160,21 @@ CONFIG_USB_ACM=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_CHIPIDEA_ULPI=y CONFIG_USB_SERIAL=y +CONFIG_USB_HSIC_USB4604=y CONFIG_USB_MSM_OTG=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_CONFIGFS=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_USB_ULPI_BUS=y CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y -CONFIG_MMC_QCOM_DML=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_MSM=y @@ -173,7 +184,6 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_PM8058=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RPMSG_QCOM_SMD=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PM8XXX=y CONFIG_DMADEVICES=y @@ -187,15 +197,17 @@ CONFIG_IPQ_GCC_4019=y CONFIG_IPQ_LCC_806X=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_LCC_8960=y -CONFIG_MDM_GCC_9615=y CONFIG_MDM_LCC_9615=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y +CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_REMOTEPROC=y CONFIG_QCOM_ADSP_PIL=y CONFIG_QCOM_Q6V5_PIL=y CONFIG_QCOM_WCNSS_PIL=y +CONFIG_RPMSG_CHAR=y +CONFIG_RPMSG_QCOM_SMD=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_PM=y CONFIG_QCOM_SMEM=y @@ -203,6 +215,7 @@ CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y CONFIG_QCOM_SMSM=y CONFIG_QCOM_WCNSS_CTRL=y +CONFIG_EXTCON_QCOM_SPMI_MISC=y CONFIG_IIO=y CONFIG_IIO_BUFFER_CB=y CONFIG_IIO_SW_TRIGGER=y @@ -211,9 +224,11 @@ CONFIG_MPU3050_I2C=y CONFIG_AK8975=y CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_BMP280=y +CONFIG_PWM=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y -CONFIG_NVMEM=y +CONFIG_PHY_QCOM_USB_HS=y +CONFIG_PHY_QCOM_USB_HSIC=y CONFIG_QCOM_QFPROM=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y @@ -234,7 +249,4 @@ CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOCKUP_DETECTOR=y -# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set -CONFIG_TIMER_STATS=y diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index 90e5c46913a5b58d9fc7ae7ea4e52143d83dcaaf..bb358ffde7d240eb952414e69c146810699090cb 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -18,7 +18,6 @@ CONFIG_EMBEDDED=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set # CONFIG_MMU is not set -CONFIG_ARM_SINGLE_ARMV7M=y CONFIG_ARCH_STM32=y CONFIG_CPU_V7M_NUM_IRQ=240 CONFIG_SET_MEM_PARAM=y @@ -44,18 +43,18 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_DEVKMEM is not set CONFIG_SERIAL_STM32=y CONFIG_SERIAL_STM32_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_STM32F4=y +CONFIG_I2C_STM32F7=y +CONFIG_GPIO_STMPE=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y -CONFIG_REGULATOR=y -CONFIG_GPIO_STMPE=y CONFIG_MFD_STMPE=y +CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_USB_SUPPORT is not set CONFIG_NEW_LEDS=y @@ -67,6 +66,8 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_STM32=y CONFIG_DMADEVICES=y CONFIG_STM32_DMA=y +CONFIG_STM32_DMAMUX=y +CONFIG_STM32_MDMA=y CONFIG_IIO=y CONFIG_STM32_ADC_CORE=y CONFIG_STM32_ADC=y @@ -81,8 +82,6 @@ CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_FTRACE is not set CONFIG_CRYPTO=y -CONFIG_CRYPTO_DEV_STM32=y CONFIG_CRC_ITU_T=y CONFIG_CRC7=y diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index 9327e3a101dc4852e530a9ef6a6aaeb2e83e92f2..0a8d7bba2cb01235e21a54019e64db81741c482a 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -107,6 +107,7 @@ static inline u32 arch_timer_get_cntkctl(void) static inline void arch_timer_set_cntkctl(u32 cntkctl) { asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl)); + isb(); } #endif diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index ad301f107dd286cff4432b8cc0284ff5976eec54..bc8d4bbd82e27719a990c7972fd77bfca9dc7aef 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -518,4 +518,22 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) #endif .endm + .macro bug, msg, line +#ifdef CONFIG_THUMB2_KERNEL +1: .inst 0xde02 +#else +1: .inst 0xe7f001f2 +#endif +#ifdef CONFIG_DEBUG_BUGVERBOSE + .pushsection .rodata.str, "aMS", %progbits, 1 +2: .asciz "\msg" + .popsection + .pushsection __bug_table, "aw" + .align 2 + .word 1b, 2b + .hword \line + .popsection +#endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 441933311bbf8a2eda92b5e1547f550a98a6b690..cb546425da8a09437cfb036bdc260ec7fce9f24f 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -174,6 +174,11 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void) return read_cpuid(CPUID_CACHETYPE); } +static inline unsigned int __attribute_const__ read_cpuid_mputype(void) +{ + return read_cpuid(CPUID_MPUIR); +} + #elif defined(CONFIG_CPU_V7M) static inline unsigned int __attribute_const__ read_cpuid_id(void) @@ -186,6 +191,11 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void) return readl(BASEADDR_V7M_SCB + V7M_SCB_CTR); } +static inline unsigned int __attribute_const__ read_cpuid_mputype(void) +{ + return readl(BASEADDR_V7M_SCB + MPU_TYPE); +} + #else /* ifdef CONFIG_CPU_CP15 / elif defined(CONFIG_CPU_V7M) */ static inline unsigned int __attribute_const__ read_cpuid_id(void) diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h index 0722ec6be692381cee16f3f2ea4e8c32ce05677d..6821f1249300d99ee165d53053880ade369b0d78 100644 --- a/arch/arm/include/asm/dma-iommu.h +++ b/arch/arm/include/asm/dma-iommu.h @@ -7,7 +7,6 @@ #include #include #include -#include #include #define ARM_MAPPING_ERROR (~(dma_addr_t)0x0) diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 3ca1199978186b47b3858996da4005952c5dc72b..daf837423a766ee22db60439e9006ed617bda25e 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -190,13 +190,6 @@ extern int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, unsigned long attrs); -/* - * This can be called during early boot to increase the size of the atomic - * coherent DMA pool above the default value of 256KiB. It must be called - * before postcore_initcall. - */ -extern void __init init_dma_coherent_pool_size(unsigned long size); - /* * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" * and utilize bounce buffers as needed to work around limited DMA windows. diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 8c5ca92a87a990ea69d58b9167299fc53d2d9e92..b078d992414b7ca21992f64d5ec2b2310e70b6fb 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -101,10 +101,15 @@ struct elf32_hdr; extern int elf_check_arch(const struct elf32_hdr *); #define elf_check_arch elf_check_arch +#define ELFOSABI_ARM_FDPIC 65 /* ARM FDPIC platform */ +#define elf_check_fdpic(x) ((x)->e_ident[EI_OSABI] == ELFOSABI_ARM_FDPIC) +#define elf_check_const_displacement(x) ((x)->e_flags & EF_ARM_PIC) +#define ELF_FDPIC_CORE_EFLAGS 0 + #define vmcore_elf64_check_arch(x) (0) -extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int); -#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk) +extern int arm_elf_read_implies_exec(int); +#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(stk) struct task_struct; int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); @@ -121,6 +126,13 @@ int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); have no such handler. */ #define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0 +#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, dynamic_addr) \ + do { \ + (_r)->ARM_r7 = _exec_map_addr; \ + (_r)->ARM_r8 = _interp_map_addr; \ + (_r)->ARM_r9 = dynamic_addr; \ + } while(0) + extern void elf_set_personality(const struct elf32_hdr *); #define SET_PERSONALITY(ex) elf_set_personality(&(ex)) diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index b03d3fa2e58d86595ad0df1df16abfdccbaf76be..eb4e4207cd3caed204fecdaeb71956eaa1e0b074 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -19,7 +19,6 @@ } while (0) extern pte_t *pkmap_page_table; -extern pte_t *fixmap_page_table; extern void *kmap_high(struct page *page); extern void kunmap_high(struct page *page); diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h index c8781450905be94995e0df72aeb3cc722afd1b60..3ab8b3781bfeca7264989b813209a99d115d35f2 100644 --- a/arch/arm/include/asm/kvm_arm.h +++ b/arch/arm/include/asm/kvm_arm.h @@ -161,8 +161,7 @@ #else #define VTTBR_X (5 - KVM_T0SZ) #endif -#define VTTBR_BADDR_SHIFT (VTTBR_X - 1) -#define VTTBR_BADDR_MASK (((_AC(1, ULL) << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT) +#define VTTBR_BADDR_MASK (((_AC(1, ULL) << (40 - VTTBR_X)) - 1) << VTTBR_X) #define VTTBR_VMID_SHIFT _AC(48, ULL) #define VTTBR_VMID_MASK(size) (_AT(u64, (1 << size) - 1) << VTTBR_VMID_SHIFT) diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 14d68a4d826f6388af790b91bc3c2ae7fa80de13..36dd2962a42db2868badb568e38118884321eddb 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -68,6 +68,8 @@ extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu); +extern void __kvm_timer_set_cntvoff(u32 cntvoff_low, u32 cntvoff_high); + extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); extern void __init_stage2_translation(void); diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index 98089ffd91bb602649cc7724adafe5ce045b9c8a..3d22eb87f919a81ce530baeee88247c75521a4ef 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h @@ -25,7 +25,22 @@ #include #include +/* arm64 compatibility macros */ +#define COMPAT_PSR_MODE_ABT ABT_MODE +#define COMPAT_PSR_MODE_UND UND_MODE +#define COMPAT_PSR_T_BIT PSR_T_BIT +#define COMPAT_PSR_I_BIT PSR_I_BIT +#define COMPAT_PSR_A_BIT PSR_A_BIT +#define COMPAT_PSR_E_BIT PSR_E_BIT +#define COMPAT_PSR_IT_MASK PSR_IT_MASK + unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num); + +static inline unsigned long *vcpu_reg32(struct kvm_vcpu *vcpu, u8 reg_num) +{ + return vcpu_reg(vcpu, reg_num); +} + unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu); static inline unsigned long vcpu_get_reg(struct kvm_vcpu *vcpu, @@ -42,10 +57,25 @@ static inline void vcpu_set_reg(struct kvm_vcpu *vcpu, u8 reg_num, bool kvm_condition_valid32(const struct kvm_vcpu *vcpu); void kvm_skip_instr32(struct kvm_vcpu *vcpu, bool is_wide_instr); -void kvm_inject_undefined(struct kvm_vcpu *vcpu); +void kvm_inject_undef32(struct kvm_vcpu *vcpu); +void kvm_inject_dabt32(struct kvm_vcpu *vcpu, unsigned long addr); +void kvm_inject_pabt32(struct kvm_vcpu *vcpu, unsigned long addr); void kvm_inject_vabt(struct kvm_vcpu *vcpu); -void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr); -void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr); + +static inline void kvm_inject_undefined(struct kvm_vcpu *vcpu) +{ + kvm_inject_undef32(vcpu); +} + +static inline void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr) +{ + kvm_inject_dabt32(vcpu, addr); +} + +static inline void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr) +{ + kvm_inject_pabt32(vcpu, addr); +} static inline bool kvm_condition_valid(const struct kvm_vcpu *vcpu) { @@ -203,7 +233,7 @@ static inline u8 kvm_vcpu_trap_get_fault_type(struct kvm_vcpu *vcpu) static inline bool kvm_vcpu_dabt_isextabt(struct kvm_vcpu *vcpu) { - switch (kvm_vcpu_trap_get_fault_type(vcpu)) { + switch (kvm_vcpu_trap_get_fault(vcpu)) { case FSC_SEA: case FSC_SEA_TTW0: case FSC_SEA_TTW1: diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 4a879f6ff13bea92d189eec9370be73cd616705c..a9f7d3f47134a96536480275168247e309d78388 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -285,6 +285,11 @@ static inline void kvm_arm_init_debug(void) {} static inline void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) {} static inline void kvm_arm_clear_debug(struct kvm_vcpu *vcpu) {} static inline void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu) {} +static inline bool kvm_arm_handle_step_debug(struct kvm_vcpu *vcpu, + struct kvm_run *run) +{ + return false; +} int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr); @@ -293,4 +298,7 @@ int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu, int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr); +/* All host FP/SIMD state is restored on guest exit, so nothing to save: */ +static inline void kvm_fpsimd_flush_cpu_state(void) {} + #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h index 14b5903f022461a2f090ad16ff7880e13cea04d3..ab20ffa8b9e7658bc73779b7b6ae711f140d2105 100644 --- a/arch/arm/include/asm/kvm_hyp.h +++ b/arch/arm/include/asm/kvm_hyp.h @@ -98,8 +98,8 @@ #define cntvoff_el2 CNTVOFF #define cnthctl_el2 CNTHCTL -void __timer_save_state(struct kvm_vcpu *vcpu); -void __timer_restore_state(struct kvm_vcpu *vcpu); +void __timer_enable_traps(struct kvm_vcpu *vcpu); +void __timer_disable_traps(struct kvm_vcpu *vcpu); void __vgic_v2_save_state(struct kvm_vcpu *vcpu); void __vgic_v2_restore_state(struct kvm_vcpu *vcpu); diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 65669b9ce128821e92178024d80507150411e1ff..1592a4264488e2c0646c5500fc6e4b8c44d5247a 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -15,6 +15,10 @@ typedef struct { #ifdef CONFIG_VDSO unsigned long vdso; #endif +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif } mm_context_t; #ifdef CONFIG_CPU_HAS_ASID @@ -34,6 +38,10 @@ typedef struct { */ typedef struct { unsigned long end_brk; +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif } mm_context_t; #endif diff --git a/arch/arm/include/asm/mpu.h b/arch/arm/include/asm/mpu.h index 0c3f774fa4b5dfc451b2180e576d3e910f15dbb6..6d1491c8ee2227eeea54624f7e2eca07e2b84131 100644 --- a/arch/arm/include/asm/mpu.h +++ b/arch/arm/include/asm/mpu.h @@ -2,8 +2,6 @@ #ifndef __ARM_MPU_H #define __ARM_MPU_H -#ifdef CONFIG_ARM_MPU - /* MPUIR layout */ #define MPUIR_nU 1 #define MPUIR_DREGION 8 @@ -18,6 +16,11 @@ /* MPU D/I Size Register fields */ #define MPU_RSR_SZ 1 #define MPU_RSR_EN 0 +#define MPU_RSR_SD 8 + +/* Number of subregions (SD) */ +#define MPU_NR_SUBREGS 8 +#define MPU_MIN_SUBREG_SIZE 256 /* The D/I RSR value for an enabled region spanning the whole of memory */ #define MPU_RSR_ALL_MEM 63 @@ -39,6 +42,7 @@ #endif /* Access permission bits of ACR (only define those that we use)*/ +#define MPU_AP_PL1RO_PL0NA (0x5 << 8) #define MPU_AP_PL1RW_PL0RW (0x3 << 8) #define MPU_AP_PL1RW_PL0R0 (0x2 << 8) #define MPU_AP_PL1RW_PL0NA (0x1 << 8) @@ -47,7 +51,7 @@ #define MPU_PROBE_REGION 0 #define MPU_BG_REGION 1 #define MPU_RAM_REGION 2 -#define MPU_VECTORS_REGION 3 +#define MPU_ROM_REGION 3 /* Maximum number of regions Linux is interested in */ #define MPU_MAX_REGIONS 16 @@ -65,13 +69,23 @@ struct mpu_rgn { }; struct mpu_rgn_info { - u32 mpuir; + unsigned int used; struct mpu_rgn rgns[MPU_MAX_REGIONS]; }; extern struct mpu_rgn_info mpu_rgn_info; -#endif /* __ASSEMBLY__ */ +#ifdef CONFIG_ARM_MPU + +extern void __init adjust_lowmem_bounds_mpu(void); +extern void __init mpu_setup(void); -#endif /* CONFIG_ARM_MPU */ +#else + +static inline void adjust_lowmem_bounds_mpu(void) {} +static inline void mpu_setup(void) {} + +#endif /* !CONFIG_ARM_MPU */ + +#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index b2902a5cd780fdbeaba81b7e4e7f9b4a610350be..2d7344f0e2085b2a72da34f04fc3264e88834b3a 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -57,7 +57,7 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) extern pgd_t *pgd_alloc(struct mm_struct *mm); extern void pgd_free(struct mm_struct *mm, pgd_t *pgd); -#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO) +#define PGALLOC_GFP (GFP_KERNEL | __GFP_ZERO) static inline void clean_pte_table(pte_t *pte) { diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 2a029bceaf2f8593788dea27ec05f3664fc9733a..1a7a17b2a1bae97a21fca6a4920efd96540ac43d 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -221,7 +221,6 @@ static inline pte_t pte_mkspecial(pte_t pte) } #define __HAVE_ARCH_PTE_SPECIAL -#define __HAVE_ARCH_PMD_WRITE #define pmd_write(pmd) (pmd_isclear((pmd), L_PMD_SECT_RDONLY)) #define pmd_dirty(pmd) (pmd_isset((pmd), L_PMD_SECT_DIRTY)) #define pud_page(pud) pmd_page(__pmd(pud_val(pud))) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 1c462381c225eea31346ec4f19145e3fd449caab..150ece66ddf34506cf8d36963c2461a8188ebe91 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -232,6 +232,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_valid_user(pte) \ (pte_valid(pte) && pte_isset((pte), L_PTE_USER) && pte_young(pte)) +static inline bool pte_access_permitted(pte_t pte, bool write) +{ + pteval_t mask = L_PTE_PRESENT | L_PTE_USER; + pteval_t needed = mask; + + if (write) + mask |= L_PTE_RDONLY; + + return (pte_val(pte) & mask) == needed; +} +#define pte_access_permitted pte_access_permitted + #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) { diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index c3d5fc124a054c6309ffacdb2845ff22fd5bfa56..338cbe0a18efe742bfc9ab9c9210036636a2d53b 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -47,15 +47,24 @@ struct thread_struct { #define INIT_THREAD { } -#ifdef CONFIG_MMU -#define nommu_start_thread(regs) do { } while (0) -#else -#define nommu_start_thread(regs) regs->ARM_r10 = current->mm->start_data -#endif - #define start_thread(regs,pc,sp) \ ({ \ + unsigned long r7, r8, r9; \ + \ + if (IS_ENABLED(CONFIG_BINFMT_ELF_FDPIC)) { \ + r7 = regs->ARM_r7; \ + r8 = regs->ARM_r8; \ + r9 = regs->ARM_r9; \ + } \ memset(regs->uregs, 0, sizeof(regs->uregs)); \ + if (IS_ENABLED(CONFIG_BINFMT_ELF_FDPIC) && \ + current->personality & FDPIC_FUNCPTRS) { \ + regs->ARM_r7 = r7; \ + regs->ARM_r8 = r8; \ + regs->ARM_r9 = r9; \ + regs->ARM_r10 = current->mm->start_data; \ + } else if (!IS_ENABLED(CONFIG_MMU)) \ + regs->ARM_r10 = current->mm->start_data; \ if (current->personality & ADDR_LIMIT_32BIT) \ regs->ARM_cpsr = USR_MODE; \ else \ @@ -65,7 +74,6 @@ struct thread_struct { regs->ARM_cpsr |= PSR_ENDSTATE; \ regs->ARM_pc = pc & ~1; /* pc */ \ regs->ARM_sp = sp; /* sp */ \ - nommu_start_thread(regs); \ }) /* Forward declaration, a strange C thing */ diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 3d6dc8b460e4b4ea6b32d66f3ec0004378e53d9f..709a55989cb0641f7006f5a1765898aa9fb972c3 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -60,7 +60,7 @@ asmlinkage void secondary_start_kernel(void); */ struct secondary_data { union { - unsigned long mpu_rgn_szr; + struct mpu_rgn_info *mpu_rgn_info; u64 pgdir; }; unsigned long swapper_pg_dir; diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h index 800f5228939fa669dbc255d43146e62a2309356f..b818e5d0cd7840efcdc2689df5d18401bbf10b0a 100644 --- a/arch/arm/include/asm/smp_scu.h +++ b/arch/arm/include/asm/smp_scu.h @@ -28,6 +28,8 @@ static inline unsigned long scu_a9_get_base(void) #ifdef CONFIG_HAVE_ARM_SCU unsigned int scu_get_core_count(void __iomem *); int scu_power_mode(void __iomem *, unsigned int); +int scu_cpu_power_enable(void __iomem *, unsigned int); +int scu_get_cpu_power_mode(void __iomem *scu_base, unsigned int logical_cpu); #else static inline unsigned int scu_get_core_count(void __iomem *scu_base) { @@ -37,6 +39,16 @@ static inline int scu_power_mode(void __iomem *scu_base, unsigned int mode) { return -EINVAL; } +static inline int scu_cpu_power_enable(void __iomem *scu_base, + unsigned int mode) +{ + return -EINVAL; +} +static inline int scu_get_cpu_power_mode(void __iomem *scu_base, + unsigned int logical_cpu) +{ + return -EINVAL; +} #endif #if defined(CONFIG_SMP) && defined(CONFIG_HAVE_ARM_SCU) diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h index 3f0d95ab14b8ee03ed5735548a620fe04d8d63f0..5c5e62cb304b4ebc77896bb5e70ca190f398ae35 100644 --- a/arch/arm/include/asm/ucontext.h +++ b/arch/arm/include/asm/ucontext.h @@ -3,6 +3,7 @@ #define _ASMARM_UCONTEXT_H #include +#include /* * struct sigcontext only has room for the basic registers, but struct diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h index e6d9e29fcae44ce06c8829fd27dc30ac43c56049..634e77107425df69c4b658c4887a9b5cec1cfeac 100644 --- a/arch/arm/include/asm/v7m.h +++ b/arch/arm/include/asm/v7m.h @@ -58,6 +58,16 @@ #define V7M_SCB_CCSIDR 0x80 /* Cache size ID register */ #define V7M_SCB_CSSELR 0x84 /* Cache size selection register */ +/* Memory-mapped MPU registers for M-class */ +#define MPU_TYPE 0x90 +#define MPU_CTRL 0x94 +#define MPU_CTRL_ENABLE 1 +#define MPU_CTRL_PRIVDEFENA (1 << 2) + +#define MPU_RNR 0x98 +#define MPU_RBAR 0x9c +#define MPU_RASR 0xa0 + /* Cache opeartions */ #define V7M_SCB_ICIALLU 0x250 /* I-cache invalidate all to PoU */ #define V7M_SCB_ICIMVAU 0x258 /* I-cache invalidate by MVA to PoU */ diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S index 52aaed2b936fb0324c707f801b06a90ce88f60f7..c826f15d2f80382e160633bbc82f4d3a02f9b8fb 100644 --- a/arch/arm/include/debug/brcmstb.S +++ b/arch/arm/include/debug/brcmstb.S @@ -58,6 +58,7 @@ /* Check SUN_TOP_CTRL base */ ldr \rp, =SUN_TOP_CTRL_BASE @ load SUN_TOP_CTRL PA ldr \rv, [\rp, #0] @ get register contents +ARM_BE8( rev \rv, \rv ) and \rv, \rv, #0xffffff00 @ strip revision bits [7:0] /* Chip specific detection starts here */ @@ -98,11 +99,13 @@ .endm .macro store, rd, rx:vararg +ARM_BE8( rev \rd, \rd ) str \rd, \rx .endm .macro load, rd, rx:vararg ldr \rd, \rx +ARM_BE8( rev \rd, \rd ) .endm .macro senduart,rd,rx diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild index 4d53de308ee089a7b745926ab8da16caa825806e..4d1cc1847edf076dfb3ea03db6712803a851d28b 100644 --- a/arch/arm/include/uapi/asm/Kbuild +++ b/arch/arm/include/uapi/asm/Kbuild @@ -7,6 +7,7 @@ generated-y += unistd-oabi.h generated-y += unistd-eabi.h generic-y += bitsperlong.h +generic-y += bpf_perf_event.h generic-y += errno.h generic-y += ioctl.h generic-y += ipcbuf.h diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index 1f57bbe82b6fb8582c2a3a1617345266c22e33e8..6edd177bb1c7c66e0ec32caf7ec8d2c3680ed2f3 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -152,6 +152,12 @@ struct kvm_arch_memory_slot { (__ARM_CP15_REG(op1, 0, crm, 0) | KVM_REG_SIZE_U64) #define ARM_CP15_REG64(...) __ARM_CP15_REG64(__VA_ARGS__) +/* PL1 Physical Timer Registers */ +#define KVM_REG_ARM_PTIMER_CTL ARM_CP15_REG32(0, 14, 2, 1) +#define KVM_REG_ARM_PTIMER_CNT ARM_CP15_REG64(0, 14) +#define KVM_REG_ARM_PTIMER_CVAL ARM_CP15_REG64(2, 14) + +/* Virtual Timer Registers */ #define KVM_REG_ARM_TIMER_CTL ARM_CP15_REG32(0, 14, 3, 1) #define KVM_REG_ARM_TIMER_CNT ARM_CP15_REG64(1, 14) #define KVM_REG_ARM_TIMER_CVAL ARM_CP15_REG64(3, 14) @@ -216,6 +222,7 @@ struct kvm_arch_memory_slot { #define KVM_DEV_ARM_ITS_SAVE_TABLES 1 #define KVM_DEV_ARM_ITS_RESTORE_TABLES 2 #define KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES 3 +#define KVM_DEV_ARM_ITS_CTRL_RESET 4 /* KVM_IRQ_LINE irq field index values */ #define KVM_ARM_IRQ_TYPE_SHIFT 24 diff --git a/arch/arm/include/uapi/asm/ptrace.h b/arch/arm/include/uapi/asm/ptrace.h index b67cda536c255b876cdf8fa6b0cbafae0f97b245..e61c65b4018db0326898c0170df19aa63bd98385 100644 --- a/arch/arm/include/uapi/asm/ptrace.h +++ b/arch/arm/include/uapi/asm/ptrace.h @@ -32,6 +32,10 @@ #define PTRACE_SETVFPREGS 28 #define PTRACE_GETHBPREGS 29 #define PTRACE_SETHBPREGS 30 +#define PTRACE_GETFDPIC 31 + +#define PTRACE_GETFDPIC_EXEC 0 +#define PTRACE_GETFDPIC_INTERP 1 /* * PSR bits @@ -54,6 +58,7 @@ #endif #define FIQ_MODE 0x00000011 #define IRQ_MODE 0x00000012 +#define MON_MODE 0x00000016 #define ABT_MODE 0x00000017 #define HYP_MODE 0x0000001a #define UND_MODE 0x0000001b diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index 39b2ad997e91ae8edf4aced8dd583599816db6c1..93ecf8aa4fe5138c56001f113f794694ba30bcc9 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -36,5 +36,6 @@ #define __ARM_NR_usr26 (__ARM_NR_BASE+3) #define __ARM_NR_usr32 (__ARM_NR_BASE+4) #define __ARM_NR_set_tls (__ARM_NR_BASE+5) +#define __ARM_NR_get_tls (__ARM_NR_BASE+6) #endif /* _UAPI__ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 499f978fb1fd612c5e0f1e6fce6c44fac5c5ef0b..b59ac4bf82b8a9d2c99a5c7ef062db9f62722adc 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -88,6 +88,11 @@ head-y := head$(MMUEXT).o obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +# This is executed very early using a temporary stack when no memory allocator +# nor global data is available. Everything has to be allocated on the stack. +CFLAGS_head-inflate-data.o := $(call cc-option,-Wframe-larger-than=10240) +obj-$(CONFIG_XIP_DEFLATED_DATA) += head-inflate-data.o + obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o AFLAGS_hyp-stub.o :=-Wa,-march=armv7-a ifeq ($(CONFIG_ARM_PSCI),y) diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 608008229c7db6881f8d103750153280d96105d7..f369ece99958770f0dad006127e7cb4327fdf098 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -23,11 +23,13 @@ #include #include #include +#include #include #include #include #include #include +#include "signal.h" /* * Make sure that the compiler and target are compatible. @@ -112,6 +114,9 @@ int main(void) DEFINE(SVC_ADDR_LIMIT, offsetof(struct svc_pt_regs, addr_limit)); DEFINE(SVC_REGS_SIZE, sizeof(struct svc_pt_regs)); BLANK(); + DEFINE(SIGFRAME_RC3_OFFSET, offsetof(struct sigframe, retcode[3])); + DEFINE(RT_SIGFRAME_RC3_OFFSET, offsetof(struct rt_sigframe, sig.retcode[3])); + BLANK(); #ifdef CONFIG_CACHE_L2X0 DEFINE(L2X0_R_PHY_BASE, offsetof(struct l2x0_regs, phy_base)); DEFINE(L2X0_R_AUX_CTRL, offsetof(struct l2x0_regs, aux_ctrl)); @@ -182,6 +187,16 @@ int main(void) BLANK(); #ifdef CONFIG_VDSO DEFINE(VDSO_DATA_SIZE, sizeof(union vdso_data_store)); +#endif + BLANK(); +#ifdef CONFIG_ARM_MPU + DEFINE(MPU_RNG_INFO_RNGS, offsetof(struct mpu_rgn_info, rgns)); + DEFINE(MPU_RNG_INFO_USED, offsetof(struct mpu_rgn_info, used)); + + DEFINE(MPU_RNG_SIZE, sizeof(struct mpu_rgn)); + DEFINE(MPU_RGN_DRBAR, offsetof(struct mpu_rgn, drbar)); + DEFINE(MPU_RGN_DRSR, offsetof(struct mpu_rgn, drsr)); + DEFINE(MPU_RGN_DRACR, offsetof(struct mpu_rgn, dracr)); #endif return 0; } diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c index 98fbfd235ac875662c6666abfad5c53fbd93b1df..c10a3e8ee998efeaabc0c544037006ef0ab6cb3f 100644 --- a/arch/arm/kernel/atags_parse.c +++ b/arch/arm/kernel/atags_parse.c @@ -196,11 +196,8 @@ setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) break; } - if (!mdesc) { - early_print("\nError: unrecognized/unsupported machine ID" - " (r1 = 0x%08x).\n\n", machine_nr); - dump_machine_table(); /* does not return */ - } + if (!mdesc) + return NULL; if (__atags_pointer) tags = phys_to_virt(__atags_pointer); diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 0a498cb3fad88d046c23073a5d1b7785fdfaf1a7..b795dc2408c05a65fb3e28ec2001ebb04eaf50df 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -55,7 +55,9 @@ ENDPROC(printhex4) ENTRY(printhex2) mov r1, #2 -printhex: adr r2, hexbuf +printhex: adr r2, hexbuf_rel + ldr r3, [r2] + add r2, r2, r3 add r3, r2, r1 mov r1, #0 strb r1, [r3] @@ -71,7 +73,11 @@ printhex: adr r2, hexbuf b printascii ENDPROC(printhex2) -hexbuf: .space 16 + .pushsection .bss +hexbuf_addr: .space 16 + .popsection + .align +hexbuf_rel: .long hexbuf_addr - . .ltorg @@ -79,25 +85,28 @@ hexbuf: .space 16 ENTRY(printascii) addruart_current r3, r1, r2 - b 2f -1: waituart r2, r3 - senduart r1, r3 - busyuart r2, r3 - teq r1, #'\n' - moveq r1, #'\r' - beq 1b -2: teq r0, #0 +1: teq r0, #0 ldrneb r1, [r0], #1 teqne r1, #0 - bne 1b - ret lr + reteq lr +2: teq r1, #'\n' + bne 3f + mov r1, #'\r' + waituart r2, r3 + senduart r1, r3 + busyuart r2, r3 + mov r1, #'\n' +3: waituart r2, r3 + senduart r1, r3 + busyuart r2, r3 + b 1b ENDPROC(printascii) ENTRY(printch) addruart_current r3, r1, r2 mov r1, r0 mov r0, #0 - b 1b + b 2b ENDPROC(printch) #ifdef CONFIG_MMU @@ -124,7 +133,9 @@ ENTRY(printascii) ENDPROC(printascii) ENTRY(printch) - adr r1, hexbuf + adr r1, hexbuf_rel + ldr r2, [r1] + add r1, r1, r2 strb r0, [r1] mov r0, #0x03 @ SYS_WRITEC ARM( svc #0x123456 ) diff --git a/arch/arm/kernel/early_printk.c b/arch/arm/kernel/early_printk.c index 43076536965c6631741f135472192cb79c1e2041..9257736ec9fa56b85f292ce019fca1a2689c1ab1 100644 --- a/arch/arm/kernel/early_printk.c +++ b/arch/arm/kernel/early_printk.c @@ -11,16 +11,20 @@ #include #include #include +#include -extern void printch(int); +extern void printascii(const char *); static void early_write(const char *s, unsigned n) { - while (n-- > 0) { - if (*s == '\n') - printch('\r'); - printch(*s); - s++; + char buf[128]; + while (n) { + unsigned l = min(n, sizeof(buf)-1); + memcpy(buf, s, l); + buf[l] = 0; + s += l; + n -= l; + printascii(buf); } } diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index 846dda2f3c48f1532569aad4d52a89af4d7b9340..18242298138621143f87a17c3c4ee059614eb329 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -4,6 +4,7 @@ #include #include #include +#include #include int elf_check_arch(const struct elf32_hdr *x) @@ -81,7 +82,7 @@ EXPORT_SYMBOL(elf_set_personality); * - the binary requires an executable stack * - we're running on a CPU which doesn't support NX. */ -int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack) +int arm_elf_read_implies_exec(int executable_stack) { if (executable_stack != EXSTACK_DISABLE_X) return 1; @@ -90,3 +91,24 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack) return 0; } EXPORT_SYMBOL(arm_elf_read_implies_exec); + +#if defined(CONFIG_MMU) && defined(CONFIG_BINFMT_ELF_FDPIC) + +void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, + struct elf_fdpic_params *interp_params, + unsigned long *start_stack, + unsigned long *start_brk) +{ + elf_set_personality(&exec_params->hdr); + + exec_params->load_addr = 0x8000; + interp_params->load_addr = ELF_ET_DYN_BASE; + *start_stack = TASK_SIZE - SZ_16M; + + if ((exec_params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) == ELF_FDPIC_FLAG_INDEPENDENT) { + exec_params->flags &= ~ELF_FDPIC_FLAG_ARRANGEMENT; + exec_params->flags |= ELF_FDPIC_FLAG_CONSTDISP; + } +} + +#endif diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 99c908226065cf6331324309edeadfa618597874..e655dcd0a933c7e293c800facfdbd44f66154098 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -400,17 +400,8 @@ ENDPROC(sys_fstatfs64_wrapper) * offset, we return EINVAL. */ sys_mmap2: -#if PAGE_SHIFT > 12 - tst r5, #PGOFF_MASK - moveq r5, r5, lsr #PAGE_SHIFT - 12 - streq r5, [sp, #4] - beq sys_mmap_pgoff - mov r0, #-EINVAL - ret lr -#else str r5, [sp, #4] b sys_mmap_pgoff -#endif ENDPROC(sys_mmap2) #ifdef CONFIG_OABI_COMPAT diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index d523cd8439a3df250ec514e2137ba5754c157ffa..0f07579af472c8ec869c5d87fd8d1e105a24dcba 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -300,6 +300,8 @@ mov r2, sp ldr r1, [r2, #\offset + S_PSR] @ get calling cpsr ldr lr, [r2, #\offset + S_PC]! @ get pc + tst r1, #PSR_I_BIT | 0x0f + bne 1f msr spsr_cxsf, r1 @ save in spsr_svc #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K) @ We must avoid clrex due to Cortex-A15 erratum #830321 @@ -314,6 +316,7 @@ @ after ldm {}^ add sp, sp, #\offset + PT_REGS_SIZE movs pc, lr @ return & move spsr_svc into cpsr +1: bug "Returning to usermode but unexpected PSR bits set?", \@ #elif defined(CONFIG_CPU_V7M) @ V7M restore. @ Note that we don't need to do clrex here as clearing the local @@ -329,6 +332,8 @@ ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr ldr lr, [sp, #\offset + S_PC] @ get pc add sp, sp, #\offset + S_SP + tst r1, #PSR_I_BIT | 0x0f + bne 1f msr spsr_cxsf, r1 @ save in spsr_svc @ We must avoid clrex due to Cortex-A15 erratum #830321 @@ -341,6 +346,7 @@ .endif add sp, sp, #PT_REGS_SIZE - S_SP movs pc, lr @ return & move spsr_svc into cpsr +1: bug "Returning to usermode but unexpected PSR bits set?", \@ #endif /* !CONFIG_THUMB2_KERNEL */ .endm diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 8733012d231f32d5a370e2666885b0813dff097b..21dde771a7dd8d1465a73145f6351db0dfe922b4 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -79,47 +79,69 @@ ENDPROC(__vet_atags) */ __INIT __mmap_switched: - adr r3, __mmap_switched_data - - ldmia r3!, {r4, r5, r6, r7} - cmp r4, r5 @ Copy data segment if needed -1: cmpne r5, r6 - ldrne fp, [r4], #4 - strne fp, [r5], #4 - bne 1b - - mov fp, #0 @ Clear BSS (and zero fp) -1: cmp r6, r7 - strcc fp, [r6],#4 - bcc 1b - - ARM( ldmia r3, {r4, r5, r6, r7, sp}) - THUMB( ldmia r3, {r4, r5, r6, r7} ) - THUMB( ldr sp, [r3, #16] ) - str r9, [r4] @ Save processor ID - str r1, [r5] @ Save machine type - str r2, [r6] @ Save atags pointer - cmp r7, #0 - strne r0, [r7] @ Save control register values + + mov r7, r1 + mov r8, r2 + mov r10, r0 + + adr r4, __mmap_switched_data + mov fp, #0 + +#if defined(CONFIG_XIP_DEFLATED_DATA) + ARM( ldr sp, [r4], #4 ) + THUMB( ldr sp, [r4] ) + THUMB( add r4, #4 ) + bl __inflate_kernel_data @ decompress .data to RAM + teq r0, #0 + bne __error +#elif defined(CONFIG_XIP_KERNEL) + ARM( ldmia r4!, {r0, r1, r2, sp} ) + THUMB( ldmia r4!, {r0, r1, r2, r3} ) + THUMB( mov sp, r3 ) + sub r2, r2, r1 + bl memcpy @ copy .data to RAM +#endif + + ARM( ldmia r4!, {r0, r1, sp} ) + THUMB( ldmia r4!, {r0, r1, r3} ) + THUMB( mov sp, r3 ) + sub r1, r1, r0 + bl __memzero @ clear .bss + + ldmia r4, {r0, r1, r2, r3} + str r9, [r0] @ Save processor ID + str r7, [r1] @ Save machine type + str r8, [r2] @ Save atags pointer + cmp r3, #0 + strne r10, [r3] @ Save control register values + mov lr, #0 b start_kernel ENDPROC(__mmap_switched) .align 2 .type __mmap_switched_data, %object __mmap_switched_data: - .long __data_loc @ r4 - .long _sdata @ r5 - .long __bss_start @ r6 - .long _end @ r7 - .long processor_id @ r4 - .long __machine_arch_type @ r5 - .long __atags_pointer @ r6 +#ifdef CONFIG_XIP_KERNEL +#ifndef CONFIG_XIP_DEFLATED_DATA + .long _sdata @ r0 + .long __data_loc @ r1 + .long _edata_loc @ r2 +#endif + .long __bss_stop @ sp (temporary stack in .bss) +#endif + + .long __bss_start @ r0 + .long __bss_stop @ r1 + .long init_thread_union + THREAD_START_SP @ sp + + .long processor_id @ r0 + .long __machine_arch_type @ r1 + .long __atags_pointer @ r2 #ifdef CONFIG_CPU_CP15 - .long cr_alignment @ r7 + .long cr_alignment @ r3 #else - .long 0 @ r7 + .long 0 @ r3 #endif - .long init_thread_union + THREAD_START_SP @ sp .size __mmap_switched_data, . - __mmap_switched_data /* diff --git a/arch/arm/kernel/head-inflate-data.c b/arch/arm/kernel/head-inflate-data.c new file mode 100644 index 0000000000000000000000000000000000000000..6dd0ce5e6058d9059a975cf76c87f5953bcd241b --- /dev/null +++ b/arch/arm/kernel/head-inflate-data.c @@ -0,0 +1,62 @@ +/* + * XIP kernel .data segment decompressor + * + * Created by: Nicolas Pitre, August 2017 + * Copyright: (C) 2017 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +/* for struct inflate_state */ +#include "../../../lib/zlib_inflate/inftrees.h" +#include "../../../lib/zlib_inflate/inflate.h" +#include "../../../lib/zlib_inflate/infutil.h" + +extern char __data_loc[]; +extern char _edata_loc[]; +extern char _sdata[]; + +/* + * This code is called very early during the boot process to decompress + * the .data segment stored compressed in ROM. Therefore none of the global + * variables are valid yet, hence no kernel services such as memory + * allocation is available. Everything must be allocated on the stack and + * we must avoid any global data access. We use a temporary stack located + * in the .bss area. The linker script makes sure the .bss is big enough + * to hold our stack frame plus some room for called functions. + * + * We mimic the code in lib/decompress_inflate.c to use the smallest work + * area possible. And because everything is statically allocated on the + * stack then there is no need to clean up before returning. + */ + +int __init __inflate_kernel_data(void) +{ + struct z_stream_s stream, *strm = &stream; + struct inflate_state state; + char *in = __data_loc; + int rc; + + /* Check and skip gzip header (assume no filename) */ + if (in[0] != 0x1f || in[1] != 0x8b || in[2] != 0x08 || in[3] & ~3) + return -1; + in += 10; + + strm->workspace = &state; + strm->next_in = in; + strm->avail_in = _edata_loc - __data_loc; /* upper bound */ + strm->next_out = _sdata; + strm->avail_out = _edata_loc - __data_loc; + zlib_inflateInit2(strm, -MAX_WBITS); + WS(strm)->inflate_state.wsize = 0; + WS(strm)->inflate_state.window = NULL; + rc = zlib_inflate(strm, Z_FINISH); + if (rc == Z_OK || rc == Z_STREAM_END) + rc = strm->avail_out; /* should be 0 */ + return rc; +} diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 2e21e08de7478b5e19f1aee89521356e52d8c041..2e38f85b757afa377ee3571639c99d4ebbac04a8 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -13,6 +13,7 @@ */ #include #include +#include #include #include @@ -110,8 +111,8 @@ ENTRY(secondary_startup) #ifdef CONFIG_ARM_MPU /* Use MPU region info supplied by __cpu_up */ - ldr r6, [r7] @ get secondary_data.mpu_szr - bl __setup_mpu @ Initialize the MPU + ldr r6, [r7] @ get secondary_data.mpu_rgn_info + bl __secondary_setup_mpu @ Initialize the MPU #endif badr lr, 1f @ return (PIC) address @@ -175,19 +176,33 @@ ENDPROC(__after_proc_init) #ifdef CONFIG_ARM_MPU +#ifndef CONFIG_CPU_V7M /* Set which MPU region should be programmed */ -.macro set_region_nr tmp, rgnr +.macro set_region_nr tmp, rgnr, unused mov \tmp, \rgnr @ Use static region numbers mcr p15, 0, \tmp, c6, c2, 0 @ Write RGNR .endm /* Setup a single MPU region, either D or I side (D-side for unified) */ -.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE +.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE, unused mcr p15, 0, \bar, c6, c1, (0 + \side) @ I/DRBAR mcr p15, 0, \acr, c6, c1, (4 + \side) @ I/DRACR mcr p15, 0, \sr, c6, c1, (2 + \side) @ I/DRSR .endm +#else +.macro set_region_nr tmp, rgnr, base + mov \tmp, \rgnr + str \tmp, [\base, #MPU_RNR] +.endm + +.macro setup_region bar, acr, sr, unused, base + lsl \acr, \acr, #16 + orr \acr, \acr, \sr + str \bar, [\base, #MPU_RBAR] + str \acr, [\base, #MPU_RASR] +.endm +#endif /* * Setup the MPU and initial MPU Regions. We create the following regions: * Region 0: Use this for probing the MPU details, so leave disabled. @@ -201,64 +216,137 @@ ENDPROC(__after_proc_init) ENTRY(__setup_mpu) /* Probe for v7 PMSA compliance */ - mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0 +M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB) +M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB) + +AR_CLASS(mrc p15, 0, r0, c0, c1, 4) @ Read ID_MMFR0 +M_CLASS(ldr r0, [r12, 0x50]) and r0, r0, #(MMFR0_PMSA) @ PMSA field teq r0, #(MMFR0_PMSAv7) @ PMSA v7 - bne __error_p @ Fail: ARM_MPU on NOT v7 PMSA + bxne lr /* Determine whether the D/I-side memory map is unified. We set the * flags here and continue to use them for the rest of this function */ - mrc p15, 0, r0, c0, c0, 4 @ MPUIR +AR_CLASS(mrc p15, 0, r0, c0, c0, 4) @ MPUIR +M_CLASS(ldr r0, [r12, #MPU_TYPE]) ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU - beq __error_p @ Fail: ARM_MPU and no MPU + bxeq lr tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified /* Setup second region first to free up r6 */ - set_region_nr r0, #MPU_RAM_REGION + set_region_nr r0, #MPU_RAM_REGION, r12 isb /* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */ ldr r0, =PLAT_PHYS_OFFSET @ RAM starts at PHYS_OFFSET ldr r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL) - setup_region r0, r5, r6, MPU_DATA_SIDE @ PHYS_OFFSET, shared, enabled - beq 1f @ Memory-map not unified - setup_region r0, r5, r6, MPU_INSTR_SIDE @ PHYS_OFFSET, shared, enabled + setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ PHYS_OFFSET, shared, enabled + beq 1f @ Memory-map not unified + setup_region r0, r5, r6, MPU_INSTR_SIDE, r12 @ PHYS_OFFSET, shared, enabled 1: isb /* First/background region */ - set_region_nr r0, #MPU_BG_REGION + set_region_nr r0, #MPU_BG_REGION, r12 isb /* Execute Never, strongly ordered, inaccessible to PL0, rw PL1 */ mov r0, #0 @ BG region starts at 0x0 ldr r5,=(MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA) mov r6, #MPU_RSR_ALL_MEM @ 4GB region, enabled - setup_region r0, r5, r6, MPU_DATA_SIDE @ 0x0, BG region, enabled - beq 2f @ Memory-map not unified - setup_region r0, r5, r6, MPU_INSTR_SIDE @ 0x0, BG region, enabled + setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ 0x0, BG region, enabled + beq 2f @ Memory-map not unified + setup_region r0, r5, r6, MPU_INSTR_SIDE r12 @ 0x0, BG region, enabled 2: isb - /* Vectors region */ - set_region_nr r0, #MPU_VECTORS_REGION +#ifdef CONFIG_XIP_KERNEL + set_region_nr r0, #MPU_ROM_REGION, r12 isb - /* Shared, inaccessible to PL0, rw PL1 */ - mov r0, #CONFIG_VECTORS_BASE @ Cover from VECTORS_BASE - ldr r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL) - /* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */ - mov r6, #(((2 * PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN) - - setup_region r0, r5, r6, MPU_DATA_SIDE @ VECTORS_BASE, PL0 NA, enabled - beq 3f @ Memory-map not unified - setup_region r0, r5, r6, MPU_INSTR_SIDE @ VECTORS_BASE, PL0 NA, enabled + + ldr r5,=(MPU_AP_PL1RO_PL0NA | MPU_RGN_NORMAL) + + ldr r0, =CONFIG_XIP_PHYS_ADDR @ ROM start + ldr r6, =(_exiprom) @ ROM end + sub r6, r6, r0 @ Minimum size of region to map + clz r6, r6 @ Region size must be 2^N... + rsb r6, r6, #31 @ ...so round up region size + lsl r6, r6, #MPU_RSR_SZ @ Put size in right field + orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit + + setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled + beq 3f @ Memory-map not unified + setup_region r0, r5, r6, MPU_INSTR_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled 3: isb +#endif + + /* Enable the MPU */ +AR_CLASS(mrc p15, 0, r0, c1, c0, 0) @ Read SCTLR +AR_CLASS(bic r0, r0, #CR_BR) @ Disable the 'default mem-map' +AR_CLASS(orr r0, r0, #CR_M) @ Set SCTRL.M (MPU on) +AR_CLASS(mcr p15, 0, r0, c1, c0, 0) @ Enable MPU + +M_CLASS(ldr r0, [r12, #MPU_CTRL]) +M_CLASS(bic r0, #MPU_CTRL_PRIVDEFENA) +M_CLASS(orr r0, #MPU_CTRL_ENABLE) +M_CLASS(str r0, [r12, #MPU_CTRL]) + isb + + ret lr +ENDPROC(__setup_mpu) + +#ifdef CONFIG_SMP +/* + * r6: pointer at mpu_rgn_info + */ + +ENTRY(__secondary_setup_mpu) + /* Probe for v7 PMSA compliance */ + mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0 + and r0, r0, #(MMFR0_PMSA) @ PMSA field + teq r0, #(MMFR0_PMSAv7) @ PMSA v7 + bne __error_p + + /* Determine whether the D/I-side memory map is unified. We set the + * flags here and continue to use them for the rest of this function */ + mrc p15, 0, r0, c0, c0, 4 @ MPUIR + ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU + beq __error_p + + ldr r4, [r6, #MPU_RNG_INFO_USED] + mov r5, #MPU_RNG_SIZE + add r3, r6, #MPU_RNG_INFO_RNGS + mla r3, r4, r5, r3 + +1: + tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified + sub r3, r3, #MPU_RNG_SIZE + sub r4, r4, #1 + + set_region_nr r0, r4 + isb + + ldr r0, [r3, #MPU_RGN_DRBAR] + ldr r6, [r3, #MPU_RGN_DRSR] + ldr r5, [r3, #MPU_RGN_DRACR] + + setup_region r0, r5, r6, MPU_DATA_SIDE + beq 2f + setup_region r0, r5, r6, MPU_INSTR_SIDE +2: isb + + mrc p15, 0, r0, c0, c0, 4 @ Reevaluate the MPUIR + cmp r4, #0 + bgt 1b /* Enable the MPU */ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR - bic r0, r0, #CR_BR @ Disable the 'default mem-map' + bic r0, r0, #CR_BR @ Disable the 'default mem-map' orr r0, r0, #CR_M @ Set SCTRL.M (MPU on) mcr p15, 0, r0, c1, c0, 0 @ Enable MPU isb + ret lr -ENDPROC(__setup_mpu) -#endif +ENDPROC(__secondary_setup_mpu) + +#endif /* CONFIG_SMP */ +#endif /* CONFIG_ARM_MPU */ #include "head-common.S" diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 8e9a3e40d949567598cfdcc8146823f5ada96cb2..fc40a2b40595bef5411d2d948a06774a0d78b2b7 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -1069,6 +1069,16 @@ void __init setup_arch(char **cmdline_p) mdesc = setup_machine_fdt(__atags_pointer); if (!mdesc) mdesc = setup_machine_tags(__atags_pointer, __machine_arch_type); + if (!mdesc) { + early_print("\nError: invalid dtb and unrecognized/unsupported machine ID\n"); + early_print(" r1=0x%08x, r2=0x%08x\n", __machine_arch_type, + __atags_pointer); + if (__atags_pointer) + early_print(" r2[]=%*ph\n", 16, + phys_to_virt(__atags_pointer)); + dump_machine_table(); + } + machine_desc = mdesc; machine_name = mdesc->name; dump_stack_set_arch_desc("%s", mdesc->name); diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index b67ae12503f30c3ba113f1d8c7a943d17e9db717..bd8810d4acb393b78ee186a8719526d463eebc8b 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -19,11 +19,12 @@ #include #include #include -#include #include #include -extern const unsigned long sigreturn_codes[7]; +#include "signal.h" + +extern const unsigned long sigreturn_codes[17]; static unsigned long signal_return_offset; @@ -172,15 +173,6 @@ static int restore_vfp_context(char __user **auxp) /* * Do a signal return; undo the signal stack. These are aligned to 64-bit. */ -struct sigframe { - struct ucontext uc; - unsigned long retcode[2]; -}; - -struct rt_sigframe { - struct siginfo info; - struct sigframe sig; -}; static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf) { @@ -366,9 +358,20 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, unsigned long __user *rc, void __user *frame) { unsigned long handler = (unsigned long)ksig->ka.sa.sa_handler; + unsigned long handler_fdpic_GOT = 0; unsigned long retcode; - int thumb = 0; + unsigned int idx, thumb = 0; unsigned long cpsr = regs->ARM_cpsr & ~(PSR_f | PSR_E_BIT); + bool fdpic = IS_ENABLED(CONFIG_BINFMT_ELF_FDPIC) && + (current->personality & FDPIC_FUNCPTRS); + + if (fdpic) { + unsigned long __user *fdpic_func_desc = + (unsigned long __user *)handler; + if (__get_user(handler, &fdpic_func_desc[0]) || + __get_user(handler_fdpic_GOT, &fdpic_func_desc[1])) + return 1; + } cpsr |= PSR_ENDSTATE; @@ -408,9 +411,26 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, if (ksig->ka.sa.sa_flags & SA_RESTORER) { retcode = (unsigned long)ksig->ka.sa.sa_restorer; + if (fdpic) { + /* + * We need code to load the function descriptor. + * That code follows the standard sigreturn code + * (6 words), and is made of 3 + 2 words for each + * variant. The 4th copied word is the actual FD + * address that the assembly code expects. + */ + idx = 6 + thumb * 3; + if (ksig->ka.sa.sa_flags & SA_SIGINFO) + idx += 5; + if (__put_user(sigreturn_codes[idx], rc ) || + __put_user(sigreturn_codes[idx+1], rc+1) || + __put_user(sigreturn_codes[idx+2], rc+2) || + __put_user(retcode, rc+3)) + return 1; + goto rc_finish; + } } else { - unsigned int idx = thumb << 1; - + idx = thumb << 1; if (ksig->ka.sa.sa_flags & SA_SIGINFO) idx += 3; @@ -422,6 +442,7 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, __put_user(sigreturn_codes[idx+1], rc+1)) return 1; +rc_finish: #ifdef CONFIG_MMU if (cpsr & MODE32_BIT) { struct mm_struct *mm = current->mm; @@ -441,7 +462,7 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, * the return code written onto the stack. */ flush_icache_range((unsigned long)rc, - (unsigned long)(rc + 2)); + (unsigned long)(rc + 3)); retcode = ((unsigned long)rc) + thumb; } @@ -451,6 +472,8 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, regs->ARM_sp = (unsigned long)frame; regs->ARM_lr = retcode; regs->ARM_pc = handler; + if (fdpic) + regs->ARM_r9 = handler_fdpic_GOT; regs->ARM_cpsr = cpsr; return 0; diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h new file mode 100644 index 0000000000000000000000000000000000000000..b7b838b05229aa5cd702611013cdae97fa033b07 --- /dev/null +++ b/arch/arm/kernel/signal.h @@ -0,0 +1,11 @@ +#include + +struct sigframe { + struct ucontext uc; + unsigned long retcode[4]; +}; + +struct rt_sigframe { + struct siginfo info; + struct sigframe sig; +}; diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S index b84d0cb13682ccd42e41a22894cb8d2c1821496d..2c7b22e32152825d2d035fb760ef961c6c4d141e 100644 --- a/arch/arm/kernel/sigreturn_codes.S +++ b/arch/arm/kernel/sigreturn_codes.S @@ -14,6 +14,8 @@ * GNU General Public License for more details. */ +#include +#include #include /* @@ -51,6 +53,17 @@ ARM_OK( .arm ) .thumb .endm + .macro arm_fdpic_slot n + .org sigreturn_codes + 24 + 20 * (\n) +ARM_OK( .arm ) + .endm + + .macro thumb_fdpic_slot n + .org sigreturn_codes + 24 + 20 * (\n) + 12 + .thumb + .endm + + #if __LINUX_ARM_ARCH__ <= 4 /* * Note we manually set minimally required arch that supports @@ -90,13 +103,46 @@ ARM_OK( swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) ) movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) swi #0 + /* ARM sigreturn restorer FDPIC bounce code snippet */ + arm_fdpic_slot 0 +ARM_OK( ldr r3, [sp, #SIGFRAME_RC3_OFFSET] ) +ARM_OK( ldmia r3, {r3, r9} ) +#ifdef CONFIG_ARM_THUMB +ARM_OK( bx r3 ) +#else +ARM_OK( ret r3 ) +#endif + + /* Thumb sigreturn restorer FDPIC bounce code snippet */ + thumb_fdpic_slot 0 + ldr r3, [sp, #SIGFRAME_RC3_OFFSET] + ldmia r3, {r2, r3} + mov r9, r3 + bx r2 + + /* ARM sigreturn_rt restorer FDPIC bounce code snippet */ + arm_fdpic_slot 1 +ARM_OK( ldr r3, [sp, #RT_SIGFRAME_RC3_OFFSET] ) +ARM_OK( ldmia r3, {r3, r9} ) +#ifdef CONFIG_ARM_THUMB +ARM_OK( bx r3 ) +#else +ARM_OK( ret r3 ) +#endif + + /* Thumb sigreturn_rt restorer FDPIC bounce code snippet */ + thumb_fdpic_slot 1 + ldr r3, [sp, #RT_SIGFRAME_RC3_OFFSET] + ldmia r3, {r2, r3} + mov r9, r3 + bx r2 + /* - * Note on addtional space: setup_return in signal.c - * algorithm uses two words copy regardless whether - * it is thumb case or not, so we need additional - * word after real last entry. + * Note on additional space: setup_return in signal.c + * always copies the same number of words regardless whether + * it is thumb case or not, so we need one additional padding + * word after the last entry. */ - arm_slot 2 .space 4 .size sigreturn_codes, . - sigreturn_codes diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index c9a0a529982793ef85bbde11ec646579cd2a7d18..b4fbf00ee4ad527d256c20f055540ae74b8c2b9f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -114,7 +114,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) */ secondary_data.stack = task_stack_page(idle) + THREAD_START_SP; #ifdef CONFIG_ARM_MPU - secondary_data.mpu_rgn_szr = mpu_rgn_info.rgns[MPU_RAM_REGION].drsr; + secondary_data.mpu_rgn_info = &mpu_rgn_info; #endif #ifdef CONFIG_MMU diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 72f9241ad5dba5eb42fe7d5e5e31be456a96ad97..c6b33074c39311795716e8557a3e8862d4a051f3 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -21,6 +21,7 @@ #define SCU_STANDBY_ENABLE (1 << 5) #define SCU_CONFIG 0x04 #define SCU_CPU_STATUS 0x08 +#define SCU_CPU_STATUS_MASK GENMASK(1, 0) #define SCU_INVALIDATE 0x0c #define SCU_FPGA_REVISION 0x10 @@ -72,6 +73,24 @@ void scu_enable(void __iomem *scu_base) } #endif +static int scu_set_power_mode_internal(void __iomem *scu_base, + unsigned int logical_cpu, + unsigned int mode) +{ + unsigned int val; + int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0); + + if (mode > 3 || mode == 1 || cpu > 3) + return -EINVAL; + + val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu); + val &= ~SCU_CPU_STATUS_MASK; + val |= mode; + writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu); + + return 0; +} + /* * Set the executing CPUs power mode as defined. This will be in * preparation for it executing a WFI instruction. @@ -81,16 +100,28 @@ void scu_enable(void __iomem *scu_base) * flushed. Interrupts must also have been disabled. */ int scu_power_mode(void __iomem *scu_base, unsigned int mode) +{ + return scu_set_power_mode_internal(scu_base, smp_processor_id(), mode); +} + +/* + * Set the given (logical) CPU's power mode to SCU_PM_NORMAL. + */ +int scu_cpu_power_enable(void __iomem *scu_base, unsigned int cpu) +{ + return scu_set_power_mode_internal(scu_base, cpu, SCU_PM_NORMAL); +} + +int scu_get_cpu_power_mode(void __iomem *scu_base, unsigned int logical_cpu) { unsigned int val; - int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0); + int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0); - if (mode > 3 || mode == 1 || cpu > 3) + if (cpu > 3) return -EINVAL; - val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu) & ~0x03; - val |= mode; - writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu); + val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu); + val &= SCU_CPU_STATUS_MASK; - return 0; + return val; } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 0fcd82f013883c58229aa8647d50047af010dde2..5cf04888c581df4a21053a826f8a2fdd58204435 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -655,6 +655,9 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) set_tls(regs->ARM_r0); return 0; + case NR(get_tls): + return current_thread_info()->tp_value[0]; + default: /* Calls 9f00xx..9f07ff are defined to return -ENOSYS if not implemented, rather than raising SIGILL. This diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index 0951df916b8577cec288aefd78e204827397b364..ec4b3f94ad8071e779974dbd55f7843af175df3d 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -7,6 +7,8 @@ /* No __ro_after_init data in the .rodata section - which will always be ro */ #define RO_AFTER_INIT_DATA +#include + #include #include #include @@ -78,9 +80,7 @@ SECTIONS *(.text.fixup) *(__ex_table) #endif -#ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) -#endif *(.discard) *(.discard.*) } @@ -182,19 +182,7 @@ SECTIONS *(.taglist.init) __tagtable_end = .; } -#ifdef CONFIG_SMP_ON_UP - .init.smpalt : { - __smpalt_begin = .; - *(.alt.smp.init) - __smpalt_end = .; - } -#endif - .init.pv_table : { - __pv_table_begin = .; - *(.pv_table) - __pv_table_end = .; - } - .init.data : { + .init.rodata : { INIT_SETUP(16) INIT_CALLS CON_INITCALL @@ -202,48 +190,49 @@ SECTIONS INIT_RAM_FS } -#ifdef CONFIG_SMP - PERCPU_SECTION(L1_CACHE_BYTES) +#ifdef CONFIG_ARM_MPU + . = ALIGN(SZ_128K); #endif - _exiprom = .; /* End of XIP ROM area */ - __data_loc = ALIGN(4); /* location in binary */ - . = PAGE_OFFSET + TEXT_OFFSET; - .data : AT(__data_loc) { - _data = .; /* address in memory */ - _sdata = .; - - /* - * first, the init task union, aligned - * to an 8192 byte boundary. - */ - INIT_TASK_DATA(THREAD_SIZE) +/* + * From this point, stuff is considered writable and will be copied to RAM + */ + __data_loc = ALIGN(4); /* location in file */ + . = PAGE_OFFSET + TEXT_OFFSET; /* location in memory */ +#undef LOAD_OFFSET +#define LOAD_OFFSET (PAGE_OFFSET + TEXT_OFFSET - __data_loc) + + . = ALIGN(THREAD_SIZE); + _sdata = .; + RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) + .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) { + *(.data..ro_after_init) + } + _edata = .; - . = ALIGN(PAGE_SIZE); - __init_begin = .; + . = ALIGN(PAGE_SIZE); + __init_begin = .; + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA + } + .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { ARM_EXIT_KEEP(EXIT_DATA) - . = ALIGN(PAGE_SIZE); - __init_end = .; - - *(.data..ro_after_init) - - NOSAVE_DATA - CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) - READ_MOSTLY_DATA(L1_CACHE_BYTES) - - /* - * and the usual data section - */ - DATA_DATA - CONSTRUCTORS - - _edata = .; } - _edata_loc = __data_loc + SIZEOF(.data); +#ifdef CONFIG_SMP + PERCPU_SECTION(L1_CACHE_BYTES) +#endif + + /* + * End of copied data. We need a dummy section to get its LMA. + * Also located before final ALIGN() as trailing padding is not stored + * in the resulting binary file and useless to copy. + */ + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { } + _edata_loc = LOADADDR(.data.endmark); - BUG_TABLE + . = ALIGN(PAGE_SIZE); + __init_end = .; #ifdef CONFIG_HAVE_TCM /* @@ -302,7 +291,7 @@ SECTIONS } #endif - BSS_SECTION(0, 0, 0) + BSS_SECTION(0, 0, 8) _end = .; STABS_DEBUG @@ -323,3 +312,29 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") */ ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, "HYP init code too big or misaligned") + +#ifdef CONFIG_XIP_DEFLATED_DATA +/* + * The .bss is used as a stack area for __inflate_kernel_data() whose stack + * frame is 9568 bytes. Make sure it has extra room left. + */ +ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA") +#endif + +#ifdef CONFIG_ARM_MPU +/* + * Due to PMSAv7 restriction on base address and size we have to + * enforce minimal alignment restrictions. It was seen that weaker + * alignment restriction on _xiprom will likely force XIP address + * space spawns multiple MPU regions thus it is likely we run in + * situation when we are reprogramming MPU region we run on with + * something which doesn't cover reprogramming code itself, so as soon + * as we update MPU settings we'd immediately try to execute straight + * from background region which is XN. + * It seem that alignment in 1M should suit most users. + * _exiprom is aligned as 1/8 of 1M so can be covered by subregion + * disable + */ +ASSERT(!(_xiprom & (SZ_1M - 1)), "XIP start address may cause MPU programming issues") +ASSERT(!(_exiprom & (SZ_128K - 1)), "XIP end address may cause MPU programming issues") +#endif diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 1845a5affb44290934ac15084aad0603a20cf36c..ee53f65188724b07c517d36a8bb0763d3b5acf17 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -215,14 +215,9 @@ SECTIONS *(.pv_table) __pv_table_end = .; } - .init.data : { - INIT_DATA - INIT_SETUP(16) - INIT_CALLS - CON_INITCALL - SECURITY_INITCALL - INIT_RAM_FS - } + + INIT_DATA_SECTION(16) + .exit.data : { ARM_EXIT_KEEP(EXIT_DATA) } @@ -237,33 +232,10 @@ SECTIONS . = ALIGN(THREAD_SIZE); #endif __init_end = .; - __data_loc = .; - - .data : AT(__data_loc) { - _data = .; /* address in memory */ - _sdata = .; - - /* - * first, the init task union, aligned - * to an 8192 byte boundary. - */ - INIT_TASK_DATA(THREAD_SIZE) - - NOSAVE_DATA - CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) - READ_MOSTLY_DATA(L1_CACHE_BYTES) - - /* - * and the usual data section - */ - DATA_DATA - CONSTRUCTORS - - _edata = .; - } - _edata_loc = __data_loc + SIZEOF(.data); - BUG_TABLE + _sdata = .; + RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) + _edata = .; #ifdef CONFIG_HAVE_TCM /* diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index f24628db540984bbff0d4274bd1b312746a6347c..e2bd35b6780cd6c859758a276cea0cf3b29eada2 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -4,6 +4,7 @@ # source "virt/kvm/Kconfig" +source "virt/lib/Kconfig" menuconfig VIRTUALIZATION bool "Virtualization" @@ -23,6 +24,8 @@ config KVM select PREEMPT_NOTIFIERS select ANON_INODES select ARM_GIC + select ARM_GIC_V3 + select ARM_GIC_V3_ITS select HAVE_KVM_CPU_RELAX_INTERCEPT select HAVE_KVM_ARCH_TLB_FLUSH_ALL select KVM_MMIO @@ -36,6 +39,8 @@ config KVM select HAVE_KVM_IRQCHIP select HAVE_KVM_IRQ_ROUTING select HAVE_KVM_MSI + select IRQ_BYPASS_MANAGER + select HAVE_KVM_IRQ_BYPASS depends on ARM_VIRT_EXT && ARM_LPAE && ARM_ARCH_TIMER ---help--- Support hosting virtualized guest machines. diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index f550abd64a25df1f42de16547e6fd4a1aa092787..48de846f22464637be95c64e0a1ff9357b6e5a65 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -32,6 +32,7 @@ obj-y += $(KVM)/arm/vgic/vgic-init.o obj-y += $(KVM)/arm/vgic/vgic-irqfd.o obj-y += $(KVM)/arm/vgic/vgic-v2.o obj-y += $(KVM)/arm/vgic/vgic-v3.o +obj-y += $(KVM)/arm/vgic/vgic-v4.o obj-y += $(KVM)/arm/vgic/vgic-mmio.o obj-y += $(KVM)/arm/vgic/vgic-mmio-v2.o obj-y += $(KVM)/arm/vgic/vgic-mmio-v3.o diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c index 30a13647c54c6ef3bcf01b3db27892e929cd8e4e..cdff963f133a189e848929d831a5e88b9fb270d7 100644 --- a/arch/arm/kvm/emulate.c +++ b/arch/arm/kvm/emulate.c @@ -165,143 +165,6 @@ unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu) * Inject exceptions into the guest */ -static u32 exc_vector_base(struct kvm_vcpu *vcpu) -{ - u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR); - u32 vbar = vcpu_cp15(vcpu, c12_VBAR); - - if (sctlr & SCTLR_V) - return 0xffff0000; - else /* always have security exceptions */ - return vbar; -} - -/* - * Switch to an exception mode, updating both CPSR and SPSR. Follow - * the logic described in AArch32.EnterMode() from the ARMv8 ARM. - */ -static void kvm_update_psr(struct kvm_vcpu *vcpu, unsigned long mode) -{ - unsigned long cpsr = *vcpu_cpsr(vcpu); - u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR); - - *vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | mode; - - switch (mode) { - case FIQ_MODE: - *vcpu_cpsr(vcpu) |= PSR_F_BIT; - /* Fall through */ - case ABT_MODE: - case IRQ_MODE: - *vcpu_cpsr(vcpu) |= PSR_A_BIT; - /* Fall through */ - default: - *vcpu_cpsr(vcpu) |= PSR_I_BIT; - } - - *vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT); - - if (sctlr & SCTLR_TE) - *vcpu_cpsr(vcpu) |= PSR_T_BIT; - if (sctlr & SCTLR_EE) - *vcpu_cpsr(vcpu) |= PSR_E_BIT; - - /* Note: These now point to the mode banked copies */ - *vcpu_spsr(vcpu) = cpsr; -} - -/** - * kvm_inject_undefined - inject an undefined exception into the guest - * @vcpu: The VCPU to receive the undefined exception - * - * It is assumed that this code is called from the VCPU thread and that the - * VCPU therefore is not currently executing guest code. - * - * Modelled after TakeUndefInstrException() pseudocode. - */ -void kvm_inject_undefined(struct kvm_vcpu *vcpu) -{ - unsigned long cpsr = *vcpu_cpsr(vcpu); - bool is_thumb = (cpsr & PSR_T_BIT); - u32 vect_offset = 4; - u32 return_offset = (is_thumb) ? 2 : 4; - - kvm_update_psr(vcpu, UND_MODE); - *vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) + return_offset; - - /* Branch to exception vector */ - *vcpu_pc(vcpu) = exc_vector_base(vcpu) + vect_offset; -} - -/* - * Modelled after TakeDataAbortException() and TakePrefetchAbortException - * pseudocode. - */ -static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr) -{ - u32 vect_offset; - u32 return_offset = (is_pabt) ? 4 : 8; - bool is_lpae; - - kvm_update_psr(vcpu, ABT_MODE); - *vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) + return_offset; - - if (is_pabt) - vect_offset = 12; - else - vect_offset = 16; - - /* Branch to exception vector */ - *vcpu_pc(vcpu) = exc_vector_base(vcpu) + vect_offset; - - if (is_pabt) { - /* Set IFAR and IFSR */ - vcpu_cp15(vcpu, c6_IFAR) = addr; - is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31); - /* Always give debug fault for now - should give guest a clue */ - if (is_lpae) - vcpu_cp15(vcpu, c5_IFSR) = 1 << 9 | 0x22; - else - vcpu_cp15(vcpu, c5_IFSR) = 2; - } else { /* !iabt */ - /* Set DFAR and DFSR */ - vcpu_cp15(vcpu, c6_DFAR) = addr; - is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31); - /* Always give debug fault for now - should give guest a clue */ - if (is_lpae) - vcpu_cp15(vcpu, c5_DFSR) = 1 << 9 | 0x22; - else - vcpu_cp15(vcpu, c5_DFSR) = 2; - } - -} - -/** - * kvm_inject_dabt - inject a data abort into the guest - * @vcpu: The VCPU to receive the undefined exception - * @addr: The address to report in the DFAR - * - * It is assumed that this code is called from the VCPU thread and that the - * VCPU therefore is not currently executing guest code. - */ -void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr) -{ - inject_abt(vcpu, false, addr); -} - -/** - * kvm_inject_pabt - inject a prefetch abort into the guest - * @vcpu: The VCPU to receive the undefined exception - * @addr: The address to report in the DFAR - * - * It is assumed that this code is called from the VCPU thread and that the - * VCPU therefore is not currently executing guest code. - */ -void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr) -{ - inject_abt(vcpu, true, addr); -} - /** * kvm_inject_vabt - inject an async abort / SError into the guest * @vcpu: The VCPU to receive the exception diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c index ebd2dd46adf7f991d7131eb55873a5e916010a8d..330c9ce34ba5f68ceb7907d9a41415d598fd0b0a 100644 --- a/arch/arm/kvm/hyp/switch.c +++ b/arch/arm/kvm/hyp/switch.c @@ -174,7 +174,7 @@ int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu) __activate_vm(vcpu); __vgic_restore_state(vcpu); - __timer_restore_state(vcpu); + __timer_enable_traps(vcpu); __sysreg_restore_state(guest_ctxt); __banked_restore_state(guest_ctxt); @@ -191,7 +191,8 @@ int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu) __banked_save_state(guest_ctxt); __sysreg_save_state(guest_ctxt); - __timer_save_state(vcpu); + __timer_disable_traps(vcpu); + __vgic_save_state(vcpu); __deactivate_traps(vcpu); @@ -237,7 +238,7 @@ void __hyp_text __noreturn __hyp_panic(int cause) vcpu = (struct kvm_vcpu *)read_sysreg(HTPIDR); host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context); - __timer_save_state(vcpu); + __timer_disable_traps(vcpu); __deactivate_traps(vcpu); __deactivate_vm(vcpu); __banked_restore_state(host_ctxt); diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S index 1712f132b80d2402d94d72ea974a0c3326fa2f52..b83fdc06286a64ece150fb7e419bc587e47c3e34 100644 --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -85,7 +85,11 @@ .pushsection .text.fixup,"ax" .align 4 9001: mov r4, #-EFAULT +#ifdef CONFIG_CPU_SW_DOMAIN_PAN + ldr r5, [sp, #9*4] @ *err_ptr +#else ldr r5, [sp, #8*4] @ *err_ptr +#endif str r4, [r5] ldmia sp, {r1, r2} @ retrieve dst, len add r2, r2, r1 diff --git a/arch/arm/mach-actions/Makefile b/arch/arm/mach-actions/Makefile index c0f116241da72b46608d3fedbcca4e5dbc6e2c90..13831037d8cdf51d8604b706c39a567358ec5895 100644 --- a/arch/arm/mach-actions/Makefile +++ b/arch/arm/mach-actions/Makefile @@ -1,3 +1 @@ -obj-${CONFIG_SMP} += platsmp.o headsmp.o - -AFLAGS_headsmp.o := -Wa,-march=armv7-a +obj-${CONFIG_SMP} += platsmp.o diff --git a/arch/arm/mach-actions/headsmp.S b/arch/arm/mach-actions/headsmp.S deleted file mode 100644 index 65f53bdb69e7f13d5b392d46e55a7213dca983ff..0000000000000000000000000000000000000000 --- a/arch/arm/mach-actions/headsmp.S +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2012 Actions Semi Inc. - * Author: Actions Semi, Inc. - * - * Copyright (c) 2017 Andreas Färber - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include - -ENTRY(owl_v7_invalidate_l1) - mov r0, #0 - mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mcr p15, 2, r0, c0, c0, 0 - mrc p15, 1, r0, c0, c0, 0 - - ldr r1, =0x7fff - and r2, r1, r0, lsr #13 - - ldr r1, =0x3ff - - and r3, r1, r0, lsr #3 @ NumWays - 1 - add r2, r2, #1 @ NumSets - - and r0, r0, #0x7 - add r0, r0, #4 @ SetShift - - clz r1, r3 @ WayShift - add r4, r3, #1 @ NumWays -1: sub r2, r2, #1 @ NumSets-- - mov r3, r4 @ Temp = NumWays -2: subs r3, r3, #1 @ Temp-- - mov r5, r3, lsl r1 - mov r6, r2, lsl r0 - orr r5, r5, r6 @ Reg = (Temp< + +static const char * const bcm_hr2_dt_compat[] __initconst = { + "brcm,hr2", + NULL, +}; + +DT_MACHINE_START(BCM_HR2_DT, "Broadcom Hurricane 2 SoC") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .dt_compat = bcm_hr2_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c index 0c1edfc98696da0e0bb7f4a18cdfbcdd27a9795d..8cff865ace04bf1c900676ebdacce9342d0f5036 100644 --- a/arch/arm/mach-bcm/board_bcm2835.c +++ b/arch/arm/mach-bcm/board_bcm2835.c @@ -15,15 +15,11 @@ #include #include #include -#include #include #include -static void __init bcm2835_init(void) -{ - bcm2835_init_clocks(); -} +#include "platsmp.h" static const char * const bcm2835_compat[] = { #ifdef CONFIG_ARCH_MULTI_V6 @@ -31,11 +27,12 @@ static const char * const bcm2835_compat[] = { #endif #ifdef CONFIG_ARCH_MULTI_V7 "brcm,bcm2836", + "brcm,bcm2837", #endif NULL }; DT_MACHINE_START(BCM2835, "BCM2835") - .init_machine = bcm2835_init, - .dt_compat = bcm2835_compat + .dt_compat = bcm2835_compat, + .smp = smp_ops(bcm2836_smp_ops), MACHINE_END diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c index 9e3f275934eb412f14947bf40ae2cec0f785bcc0..7d954830eb57644e36d80b3ab17cb1778d208337 100644 --- a/arch/arm/mach-bcm/platsmp.c +++ b/arch/arm/mach-bcm/platsmp.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -287,6 +288,38 @@ static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle) return ret; } +static int bcm2836_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + void __iomem *intc_base; + struct device_node *dn; + char *name; + + name = "brcm,bcm2836-l1-intc"; + dn = of_find_compatible_node(NULL, NULL, name); + if (!dn) { + pr_err("unable to find intc node\n"); + return -ENODEV; + } + + intc_base = of_iomap(dn, 0); + of_node_put(dn); + + if (!intc_base) { + pr_err("unable to remap intc base register\n"); + return -ENOMEM; + } + + writel(virt_to_phys(secondary_startup), + intc_base + LOCAL_MAILBOX3_SET0 + 16 * cpu); + + dsb(sy); + sev(); + + iounmap(intc_base); + + return 0; +} + static const struct smp_operations kona_smp_ops __initconst = { .smp_prepare_cpus = bcm_smp_prepare_cpus, .smp_boot_secondary = kona_boot_secondary, @@ -305,3 +338,8 @@ static const struct smp_operations nsp_smp_ops __initconst = { .smp_boot_secondary = nsp_boot_secondary, }; CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops); + +const struct smp_operations bcm2836_smp_ops __initconst = { + .smp_boot_secondary = bcm2836_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(bcm_smp_bcm2836, "brcm,bcm2836-smp", &bcm2836_smp_ops); diff --git a/arch/arm/mach-bcm/platsmp.h b/arch/arm/mach-bcm/platsmp.h new file mode 100644 index 0000000000000000000000000000000000000000..b8b8b3fa350d4d49911270d1f1fb983db587d0ef --- /dev/null +++ b/arch/arm/mach-bcm/platsmp.h @@ -0,0 +1,10 @@ +/* + * Copyright (C) 2017 Stefan Wahren + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + */ + +extern const struct smp_operations bcm2836_smp_ops; diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index 5699ce39e64f70d9b2ca34865daaaa08f4325a43..f06db6700ab26acfa2ea7d0a9bb3ff1c626a0c9b 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -54,6 +54,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL), OF_DEV_AUXDATA("ti,da850-ahci", 0x01e18000, "ahci_da850", NULL), OF_DEV_AUXDATA("ti,da850-vpif", 0x01e17000, "vpif", NULL), + OF_DEV_AUXDATA("ti,da850-dsp", 0x11800000, "davinci-rproc.0", NULL), {} }; diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index e61f3dee24c257c7b77ff701d67b7b2cd1e160a5..41aa5758135665a53e73387509ace6eb76d03ecb 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -42,60 +42,12 @@ static struct ep93xxfb_mach_info __initdata simone_fb_info = { .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, }; -/* - * GPIO lines used for MMC card detection. - */ -#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0 - -/* - * MMC card detection GPIO setup. - */ - -static int simone_mmc_spi_init(struct device *dev, - irqreturn_t (*irq_handler)(int, void *), void *mmc) -{ - unsigned int gpio = MMC_CARD_DETECT_GPIO; - int irq, err; - - err = gpio_request(gpio, dev_name(dev)); - if (err) - return err; - - err = gpio_direction_input(gpio); - if (err) - goto fail; - - irq = gpio_to_irq(gpio); - if (irq < 0) - goto fail; - - err = request_irq(irq, irq_handler, IRQF_TRIGGER_FALLING, - "MMC card detect", mmc); - if (err) - goto fail; - - printk(KERN_INFO "%s: using irq %d for MMC card detection\n", - dev_name(dev), irq); - - return 0; -fail: - gpio_free(gpio); - return err; -} - -static void simone_mmc_spi_exit(struct device *dev, void *mmc) -{ - unsigned int gpio = MMC_CARD_DETECT_GPIO; - - free_irq(gpio_to_irq(gpio), mmc); - gpio_free(gpio); -} - static struct mmc_spi_platform_data simone_mmc_spi_data = { - .init = simone_mmc_spi_init, - .exit = simone_mmc_spi_exit, .detect_delay = 500, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .flags = MMC_SPI_USE_CD_GPIO, + .cd_gpio = EP93XX_GPIO_LINE_EGPIO0, + .cd_debounce = 1, }; static struct spi_board_info simone_spi_devices[] __initdata = { diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 8745162ec05d3a887f940ecd84a0d90d2e736eca..f386ebae0163cbbe00cf34776db7517a43ea2ac1 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -18,7 +18,10 @@ #include #include #include +#include +#include +#include #include #include @@ -186,24 +189,22 @@ static struct platform_device ts72xx_rtc_device = { .num_resources = ARRAY_SIZE(ts72xx_rtc_resources), }; +/************************************************************************* + * Watchdog (in CPLD) + *************************************************************************/ +#define TS72XX_WDT_CONTROL_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03800000) +#define TS72XX_WDT_FEED_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03c00000) + static struct resource ts72xx_wdt_resources[] = { - { - .start = TS72XX_WDT_CONTROL_PHYS_BASE, - .end = TS72XX_WDT_CONTROL_PHYS_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = TS72XX_WDT_FEED_PHYS_BASE, - .end = TS72XX_WDT_FEED_PHYS_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01), + DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01), }; static struct platform_device ts72xx_wdt_device = { .name = "ts72xx-wdt", .id = -1, - .num_resources = ARRAY_SIZE(ts72xx_wdt_resources), .resource = ts72xx_wdt_resources, + .num_resources = ARRAY_SIZE(ts72xx_wdt_resources), }; static struct ep93xx_eth_data __initdata ts72xx_eth_data = { @@ -232,6 +233,27 @@ static struct platform_device ts73xx_fpga_device = { #endif +/************************************************************************* + * SPI Bus + *************************************************************************/ +static struct spi_board_info ts72xx_spi_devices[] __initdata = { + { + .modalias = "tmp122", + .max_speed_hz = 2 * 1000 * 1000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static int ts72xx_spi_chipselects[] __initdata = { + EP93XX_GPIO_LINE_F(2), /* DIO_17 */ +}; + +static struct ep93xx_spi_info ts72xx_spi_info __initdata = { + .chipselect = ts72xx_spi_chipselects, + .num_chipselect = ARRAY_SIZE(ts72xx_spi_chipselects), +}; + static void __init ts72xx_init_machine(void) { ep93xx_init_devices(); @@ -244,6 +266,8 @@ static void __init ts72xx_init_machine(void) if (board_is_ts7300()) platform_device_register(&ts73xx_fpga_device); #endif + ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices, + ARRAY_SIZE(ts72xx_spi_devices)); } MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") diff --git a/arch/arm/mach-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h index b89850f1a965103945d3e3e960a1fdd2de63580b..8a3206a54b39de86223bf1a16e378ae7166f367f 100644 --- a/arch/arm/mach-ep93xx/ts72xx.h +++ b/arch/arm/mach-ep93xx/ts72xx.h @@ -39,9 +39,6 @@ #define TS72XX_OPTIONS2_TS9420 0x04 #define TS72XX_OPTIONS2_TS9420_BOOT 0x02 -#define TS72XX_WDT_CONTROL_PHYS_BASE 0x23800000 -#define TS72XX_WDT_FEED_PHYS_BASE 0x23c00000 - #ifndef __ASSEMBLY__ static inline int ts72xx_model(void) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 0a99140b6ba28d8960ec48fd68b9782aa37541d3..44fa753bd79cfdd2bd2729c638baf1ac8f96d220 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -85,11 +85,6 @@ config CPU_EXYNOS4210 default y depends on ARCH_EXYNOS4 -config SOC_EXYNOS4212 - bool "SAMSUNG EXYNOS4212" - default y - depends on ARCH_EXYNOS4 - config SOC_EXYNOS4412 bool "SAMSUNG EXYNOS4412" default y diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 9424a8a9f30892fd69cdf07d768130edf82f98ff..3f715524c9d6e05a29b9ae15c9a99dcac56807a0 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -18,7 +18,6 @@ #define EXYNOS3_SOC_MASK 0xFFFFF000 #define EXYNOS4210_CPU_ID 0x43210000 -#define EXYNOS4212_CPU_ID 0x43220000 #define EXYNOS4412_CPU_ID 0xE4412200 #define EXYNOS4_CPU_MASK 0xFFFE0000 @@ -39,7 +38,6 @@ static inline int is_samsung_##name(void) \ IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK) IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) -IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK) @@ -59,12 +57,6 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_exynos4210() 0 #endif -#if defined(CONFIG_SOC_EXYNOS4212) -# define soc_is_exynos4212() is_samsung_exynos4212() -#else -# define soc_is_exynos4212() 0 -#endif - #if defined(CONFIG_SOC_EXYNOS4412) # define soc_is_exynos4412() is_samsung_exynos4412() #else @@ -105,8 +97,7 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_exynos5800() 0 #endif -#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \ - soc_is_exynos4412()) +#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4412()) #define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \ soc_is_exynos5420() || soc_is_exynos5800()) diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index c404c15ad07fea8a93dafae7629289124c03505b..9a9caac1125a25e4cae07c27cb1f807e2f594a61 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -195,7 +195,6 @@ static void __init exynos_dt_machine_init(void) exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data; #endif if (of_machine_is_compatible("samsung,exynos4210") || - of_machine_is_compatible("samsung,exynos4212") || (of_machine_is_compatible("samsung,exynos4412") && of_machine_is_compatible("samsung,trats2")) || of_machine_is_compatible("samsung,exynos3250") || @@ -208,7 +207,6 @@ static char const *const exynos_dt_compat[] __initconst = { "samsung,exynos3250", "samsung,exynos4", "samsung,exynos4210", - "samsung,exynos4212", "samsung,exynos4412", "samsung,exynos5", "samsung,exynos5250", diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index e81a78b125d98af5f76568bb72f701400c45c2a9..2a51e4603a6f425d5d00f3364ad4a7e14f40f8c9 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -70,12 +70,7 @@ static int exynos_cpu_boot(int cpu) /* * The second parameter of SMC_CMD_CPU1BOOT command means CPU id. - * But, Exynos4212 has only one secondary CPU so second parameter - * isn't used for informing secure firmware about CPU id. */ - if (soc_is_exynos4212()) - cpu = 0; - exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0); return 0; } diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 1a7e5b5d08d83234ff58a6a75d6e0c777f0be9c6..c9740d96db9e1c37e754ff912f88372baaee97ce 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -167,8 +167,7 @@ void exynos_enter_aftr(void) exynos_pm_central_suspend(); - if (of_machine_is_compatible("samsung,exynos4212") || - of_machine_is_compatible("samsung,exynos4412")) { + if (of_machine_is_compatible("samsung,exynos4412")) { /* Setting SEQ_OPTION register */ pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0, S5P_CENTRAL_SEQ_OPTION); diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index b529ba04ed16656aeefc80eb5a4bb95119b6753d..370d37ded7e7a12c1dc0e39d414c2778788d2bbc 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -225,7 +225,6 @@ static int __init exynos_pmu_irq_init(struct device_node *node, EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu"); EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu"); -EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu"); EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu"); EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu"); EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu"); @@ -616,9 +615,6 @@ static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = { }, { .compatible = "samsung,exynos4210-pmu", .data = &exynos4_pm_data, - }, { - .compatible = "samsung,exynos4212-pmu", - .data = &exynos4_pm_data, }, { .compatible = "samsung,exynos4412-pmu", .data = &exynos4_pm_data, diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c index cda330c93d610d35d3e82e9d9574d6611dc489d4..0015abe9cb2b460e3ded0e84e06bad8d362de41c 100644 --- a/arch/arm/mach-imx/3ds_debugboard.c +++ b/arch/arm/mach-imx/3ds_debugboard.c @@ -20,7 +20,7 @@ #include #include #include - +#include "3ds_debugboard.h" #include "hardware.h" /* LAN9217 ethernet base address */ diff --git a/arch/arm/mach-imx/cpuidle-imx5.c b/arch/arm/mach-imx/cpuidle-imx5.c index 3feca526d16b8f1171b445563956be84ce830deb..db0127606aedac65f61cbcf9e326cebfdeca7964 100644 --- a/arch/arm/mach-imx/cpuidle-imx5.c +++ b/arch/arm/mach-imx/cpuidle-imx5.c @@ -9,6 +9,7 @@ #include #include #include +#include "cpuidle.h" static int imx5_cpuidle_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index b5f89fdbbb4b9d1cfa16864be13e1cb4f93b156e..7d80a0ae723cb6660585cfeb6bdcaa3982d490b9 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -289,10 +289,13 @@ static void __init imx6q_init_machine(void) static void __init imx6q_init_late(void) { /* - * WAIT mode is broken on TO 1.0 and 1.1, so there is no point - * to run cpuidle on them. + * WAIT mode is broken on imx6 Dual/Quad revision 1.0 and 1.1 so + * there is no point to run cpuidle on them. + * + * It does work on imx6 Solo/DualLite starting from 1.1 */ - if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) + if ((cpu_is_imx6q() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) || + (cpu_is_imx6dl() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_0)) imx6q_cpuidle_init(); if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index f033a57d56942442f1b7041be14887a9189fe688..a3250bc7f1148fc59c11f3c378051ad950dc253b 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -245,7 +245,7 @@ static struct map_desc mx31lite_io_desc[] __initdata = { /* * Set up static virtual mappings. */ -void __init mx31lite_map_io(void) +static void __init mx31lite_map_io(void) { mx31_map_io(); iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc)); diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c index 1e91a0918e8341220f16adea31c01cccba57e980..3c224f41e68ed4027494db30d4c9f01257f4e842 100644 --- a/arch/arm/mach-imx/mx31moboard-devboard.c +++ b/arch/arm/mach-imx/mx31moboard-devboard.c @@ -22,6 +22,7 @@ #include +#include "board-mx31moboard.h" #include "common.h" #include "devices-imx31.h" #include "ehci.h" diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c index 922d49175cb45fd611af7e7096be795d0624626a..9a5a869be1aecf1889f4e56e26d9833a398e9d4c 100644 --- a/arch/arm/mach-imx/mx31moboard-marxbot.c +++ b/arch/arm/mach-imx/mx31moboard-marxbot.c @@ -24,6 +24,7 @@ #include +#include "board-mx31moboard.h" #include "common.h" #include "devices-imx31.h" #include "ehci.h" diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index a5a4470db482b6be9eb12a87627bfd0bb6ed4c33..71b97ffe8d32c23b8c81a4d989bf3746573aa5a7 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -8,6 +8,4 @@ obj-y := core.o lm.o obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o - -obj-$(CONFIG_PCI) += pci_v3.o obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index a1af634f87096e2053b86b356052306760e564b9..8efe484fac139d8b4d9f004f18dce130fee6e2ae 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -36,7 +36,6 @@ #include "hardware.h" #include "cm.h" #include "common.h" -#include "pci_v3.h" #include "lm.h" /* Regmap to the AP system controller */ @@ -74,7 +73,6 @@ static struct map_desc ap_io_desc[] __initdata __maybe_unused = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); - pci_v3_early_init(); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c deleted file mode 100644 index 2565f0e7b5cff9b99e84e9cf043c786f2122f044..0000000000000000000000000000000000000000 --- a/arch/arm/mach-integrator/pci_v3.c +++ /dev/null @@ -1,900 +0,0 @@ -/* - * linux/arch/arm/mach-integrator/pci_v3.c - * - * PCI functions for V3 host PCI bridge - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include