Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit c539711e authored by Antoine Tenart's avatar Antoine Tenart Committed by Sebastian Hesselbarth
Browse files

ARM: dts: berlin: add BG2Q nodes for USB support 



Adds nodes describing the Marvell Berlin BG2Q USB PHY and USB. The BG2Q
SoC has 3 USB host controller, compatible with ChipIdea.

Signed-off-by: default avatarAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
parent 9f6386e1

arch/arm/boot/dts/berlin2q.dtsi

+54 −0
Original line number Original line Diff line number Diff line
@@ -114,6 +114,40 @@ 
			#interrupt-cells = <3>;

			#interrupt-cells = <3>;

		};

		};





		usb_phy2: phy@a2f400 {

			compatible = "marvell,berlin2-usb-phy";

			reg = <0xa2f400 0x128>;

			#phy-cells = <0>;

			resets = <&chip 0x104 14>;

			status = "disabled";

		};



		usb2: usb@a30000 {

			compatible = "chipidea,usb2";

			reg = <0xa30000 0x10000>;

			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&chip CLKID_USB2>;

			phys = <&usb_phy2>;

			phy-names = "usb-phy";

			status = "disabled";

		};



		usb_phy0: phy@b74000 {

			compatible = "marvell,berlin2-usb-phy";

			reg = <0xb74000 0x128>;

			#phy-cells = <0>;

			resets = <&chip 0x104 12>;

			status = "disabled";

		};



		usb_phy1: phy@b78000 {

			compatible = "marvell,berlin2-usb-phy";

			reg = <0xb78000 0x128>;

			#phy-cells = <0>;

			resets = <&chip 0x104 13>;

			status = "disabled";

		};



		eth0: ethernet@b90000 {

		eth0: ethernet@b90000 {

			compatible = "marvell,pxa168-eth";

			compatible = "marvell,pxa168-eth";

			reg = <0xb90000 0x10000>;

			reg = <0xb90000 0x10000>;
@@ -404,6 +438,26 @@ 
			};

			};

		};

		};





		usb0: usb@ed0000 {

			compatible = "chipidea,usb2";

			reg = <0xed0000 0x10000>;

			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&chip CLKID_USB0>;

			phys = <&usb_phy0>;

			phy-names = "usb-phy";

			status = "disabled";

		};



		usb1: usb@ee0000 {

			compatible = "chipidea,usb2";

			reg = <0xee0000 0x10000>;

			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&chip CLKID_USB1>;

			phys = <&usb_phy1>;

			phy-names = "usb-phy";

			status = "disabled";

		};



		apb@fc0000 {

		apb@fc0000 {

			compatible = "simple-bus";

			compatible = "simple-bus";

			#address-cells = <1>;

			#address-cells = <1>;