Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit c2c1708f authored by Ben Dooks's avatar Ben Dooks
Browse files

[ARM] JIVE: Add LCD display setup information 



Add the setup information for the LCD display
connected to the device.

Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent a2ed4065

arch/arm/mach-s3c2412/mach-jive.c

+40 −0
Original line number Diff line number Diff line
@@ -17,9 +17,12 @@ 
#include <linux/timer.h>

#include <linux/init.h>

#include <linux/sysdev.h>

#include <linux/delay.h>

#include <linux/serial_core.h>

#include <linux/platform_device.h>



#include <video/ili9320.h>



#include <linux/spi/spi.h>



#include <linux/mtd/mtd.h>
@@ -349,6 +352,42 @@ struct s3c2410fb_mach_info jive_lcd_config = { 
			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),

};



/* ILI9320 support. */



static void jive_lcm_reset(unsigned int set)

{

	printk(KERN_DEBUG "%s(%d)\n", __func__, set);



	s3c2410_gpio_setpin(S3C2410_GPG13, set);

	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);

}



#undef LCD_UPPER_MARGIN

#define LCD_UPPER_MARGIN 2



static struct ili9320_platdata jive_lcm_config = {

	.hsize		= LCD_XRES,

	.vsize		= LCD_YRES,



	.reset		= jive_lcm_reset,

	.suspend	= ILI9320_SUSPEND_DEEP,



	.entry_mode	= ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,

	.display2	= (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |

			   ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),

	.display3	= 0x0,

	.display4	= 0x0,

	.rgb_if1	= (ILI9320_RGBIF1_RIM_RGB18 |

			   ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),

	.rgb_if2	= ILI9320_RGBIF2_DPL,

	.interface2	= 0x0,

	.interface3	= 0x3,

	.interface4	= (ILI9320_INTERFACE4_RTNE(16) |

			   ILI9320_INTERFACE4_DIVE(1)),

	.interface5	= 0x0,

	.interface6	= 0x0,

};



/* LCD SPI support */



static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
@@ -380,6 +419,7 @@ static struct spi_board_info __initdata jive_spi_devs[] = { 
		.chip_select	= 0,

		.mode		= SPI_MODE_3,	/* CPOL=1, CPHA=1 */

		.max_speed_hz	= 100000,

		.platform_data	= &jive_lcm_config,

	},

};