Loading Documentation/ABI/testing/sysfs-block +59 −0 Original line number Original line Diff line number Diff line Loading @@ -60,3 +60,62 @@ Description: Indicates whether the block layer should automatically Indicates whether the block layer should automatically generate checksums for write requests bound for generate checksums for write requests bound for devices that support receiving integrity metadata. devices that support receiving integrity metadata. What: /sys/block/<disk>/alignment_offset Date: April 2009 Contact: Martin K. Petersen <martin.petersen@oracle.com> Description: Storage devices may report a physical block size that is bigger than the logical block size (for instance a drive with 4KB physical sectors exposing 512-byte logical blocks to the operating system). This parameter indicates how many bytes the beginning of the device is offset from the disk's natural alignment. What: /sys/block/<disk>/<partition>/alignment_offset Date: April 2009 Contact: Martin K. Petersen <martin.petersen@oracle.com> Description: Storage devices may report a physical block size that is bigger than the logical block size (for instance a drive with 4KB physical sectors exposing 512-byte logical blocks to the operating system). This parameter indicates how many bytes the beginning of the partition is offset from the disk's natural alignment. What: /sys/block/<disk>/queue/logical_block_size Date: May 2009 Contact: Martin K. Petersen <martin.petersen@oracle.com> Description: This is the smallest unit the storage device can address. It is typically 512 bytes. What: /sys/block/<disk>/queue/physical_block_size Date: May 2009 Contact: Martin K. Petersen <martin.petersen@oracle.com> Description: This is the smallest unit the storage device can write without resorting to read-modify-write operation. It is usually the same as the logical block size but may be bigger. One example is SATA drives with 4KB sectors that expose a 512-byte logical block size to the operating system. What: /sys/block/<disk>/queue/minimum_io_size Date: April 2009 Contact: Martin K. Petersen <martin.petersen@oracle.com> Description: Storage devices may report a preferred minimum I/O size, which is the smallest request the device can perform without incurring a read-modify-write penalty. For disk drives this is often the physical block size. For RAID arrays it is often the stripe chunk size. What: /sys/block/<disk>/queue/optimal_io_size Date: April 2009 Contact: Martin K. Petersen <martin.petersen@oracle.com> Description: Storage devices may report an optimal I/O size, which is the device's preferred unit of receiving I/O. This is rarely reported for disk drives. For RAID devices it is usually the stripe width or the internal block size. Documentation/ABI/testing/sysfs-bus-pci-devices-cciss 0 → 100644 +33 −0 Original line number Original line Diff line number Diff line Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/model Date: March 2009 Kernel Version: 2.6.30 Contact: iss_storagedev@hp.com Description: Displays the SCSI INQUIRY page 0 model for logical drive Y of controller X. Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/rev Date: March 2009 Kernel Version: 2.6.30 Contact: iss_storagedev@hp.com Description: Displays the SCSI INQUIRY page 0 revision for logical drive Y of controller X. Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/unique_id Date: March 2009 Kernel Version: 2.6.30 Contact: iss_storagedev@hp.com Description: Displays the SCSI INQUIRY page 83 serial number for logical drive Y of controller X. Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/vendor Date: March 2009 Kernel Version: 2.6.30 Contact: iss_storagedev@hp.com Description: Displays the SCSI INQUIRY page 0 vendor for logical drive Y of controller X. Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY Date: March 2009 Kernel Version: 2.6.30 Contact: iss_storagedev@hp.com Description: A symbolic link to /sys/block/cciss!cXdY Documentation/ABI/testing/sysfs-devices-cache_disable 0 → 100644 +18 −0 Original line number Original line Diff line number Diff line What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X Date: August 2008 KernelVersion: 2.6.27 Contact: mark.langsdorf@amd.com Description: These files exist in every cpu's cache index directories. There are currently 2 cache_disable_# files in each directory. Reading from these files on a supported processor will return that cache disable index value for that processor and node. Writing to one of these files will cause the specificed cache index to be disabled. Currently, only AMD Family 10h Processors support cache index disable, and only for their L3 caches. See the BIOS and Kernel Developer's Guide at http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf for formatting information and other details on the cache index disable. Users: joachim.deguara@amd.com Documentation/DMA-API.txt +12 −0 Original line number Original line Diff line number Diff line Loading @@ -704,12 +704,24 @@ this directory the following files can currently be found: The current number of free dma_debug_entries The current number of free dma_debug_entries in the allocator. in the allocator. dma-api/driver-filter You can write a name of a driver into this file to limit the debug output to requests from that particular driver. Write an empty string to that file to disable the filter and see all errors again. If you have this code compiled into your kernel it will be enabled by default. If you have this code compiled into your kernel it will be enabled by default. If you want to boot without the bookkeeping anyway you can provide If you want to boot without the bookkeeping anyway you can provide 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging. 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging. Notice that you can not enable it again at runtime. You have to reboot to do Notice that you can not enable it again at runtime. You have to reboot to do so. so. If you want to see debug messages only for a special device driver you can specify the dma_debug_driver=<drivername> parameter. This will enable the driver filter at boot time. The debug code will only print errors for that driver afterwards. This filter can be disabled or changed later using debugfs. When the code disables itself at runtime this is most likely because it ran When the code disables itself at runtime this is most likely because it ran out of dma_debug_entries. These entries are preallocated at boot. The number out of dma_debug_entries. These entries are preallocated at boot. The number of preallocated entries is defined per architecture. If it is too low for you of preallocated entries is defined per architecture. If it is too low for you Loading Documentation/DocBook/Makefile +2 −1 Original line number Original line Diff line number Diff line Loading @@ -13,7 +13,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ mac80211.xml debugobjects.xml sh.xml regulator.xml \ mac80211.xml debugobjects.xml sh.xml regulator.xml \ alsa-driver-api.xml writing-an-alsa-driver.xml alsa-driver-api.xml writing-an-alsa-driver.xml \ tracepoint.xml ### ### # The build process is as follows (targets): # The build process is as follows (targets): Loading Loading
Documentation/ABI/testing/sysfs-block +59 −0 Original line number Original line Diff line number Diff line Loading @@ -60,3 +60,62 @@ Description: Indicates whether the block layer should automatically Indicates whether the block layer should automatically generate checksums for write requests bound for generate checksums for write requests bound for devices that support receiving integrity metadata. devices that support receiving integrity metadata. What: /sys/block/<disk>/alignment_offset Date: April 2009 Contact: Martin K. Petersen <martin.petersen@oracle.com> Description: Storage devices may report a physical block size that is bigger than the logical block size (for instance a drive with 4KB physical sectors exposing 512-byte logical blocks to the operating system). This parameter indicates how many bytes the beginning of the device is offset from the disk's natural alignment. What: /sys/block/<disk>/<partition>/alignment_offset Date: April 2009 Contact: Martin K. Petersen <martin.petersen@oracle.com> Description: Storage devices may report a physical block size that is bigger than the logical block size (for instance a drive with 4KB physical sectors exposing 512-byte logical blocks to the operating system). This parameter indicates how many bytes the beginning of the partition is offset from the disk's natural alignment. What: /sys/block/<disk>/queue/logical_block_size Date: May 2009 Contact: Martin K. Petersen <martin.petersen@oracle.com> Description: This is the smallest unit the storage device can address. It is typically 512 bytes. What: /sys/block/<disk>/queue/physical_block_size Date: May 2009 Contact: Martin K. Petersen <martin.petersen@oracle.com> Description: This is the smallest unit the storage device can write without resorting to read-modify-write operation. It is usually the same as the logical block size but may be bigger. One example is SATA drives with 4KB sectors that expose a 512-byte logical block size to the operating system. What: /sys/block/<disk>/queue/minimum_io_size Date: April 2009 Contact: Martin K. Petersen <martin.petersen@oracle.com> Description: Storage devices may report a preferred minimum I/O size, which is the smallest request the device can perform without incurring a read-modify-write penalty. For disk drives this is often the physical block size. For RAID arrays it is often the stripe chunk size. What: /sys/block/<disk>/queue/optimal_io_size Date: April 2009 Contact: Martin K. Petersen <martin.petersen@oracle.com> Description: Storage devices may report an optimal I/O size, which is the device's preferred unit of receiving I/O. This is rarely reported for disk drives. For RAID devices it is usually the stripe width or the internal block size.
Documentation/ABI/testing/sysfs-bus-pci-devices-cciss 0 → 100644 +33 −0 Original line number Original line Diff line number Diff line Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/model Date: March 2009 Kernel Version: 2.6.30 Contact: iss_storagedev@hp.com Description: Displays the SCSI INQUIRY page 0 model for logical drive Y of controller X. Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/rev Date: March 2009 Kernel Version: 2.6.30 Contact: iss_storagedev@hp.com Description: Displays the SCSI INQUIRY page 0 revision for logical drive Y of controller X. Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/unique_id Date: March 2009 Kernel Version: 2.6.30 Contact: iss_storagedev@hp.com Description: Displays the SCSI INQUIRY page 83 serial number for logical drive Y of controller X. Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/vendor Date: March 2009 Kernel Version: 2.6.30 Contact: iss_storagedev@hp.com Description: Displays the SCSI INQUIRY page 0 vendor for logical drive Y of controller X. Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY Date: March 2009 Kernel Version: 2.6.30 Contact: iss_storagedev@hp.com Description: A symbolic link to /sys/block/cciss!cXdY
Documentation/ABI/testing/sysfs-devices-cache_disable 0 → 100644 +18 −0 Original line number Original line Diff line number Diff line What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X Date: August 2008 KernelVersion: 2.6.27 Contact: mark.langsdorf@amd.com Description: These files exist in every cpu's cache index directories. There are currently 2 cache_disable_# files in each directory. Reading from these files on a supported processor will return that cache disable index value for that processor and node. Writing to one of these files will cause the specificed cache index to be disabled. Currently, only AMD Family 10h Processors support cache index disable, and only for their L3 caches. See the BIOS and Kernel Developer's Guide at http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf for formatting information and other details on the cache index disable. Users: joachim.deguara@amd.com
Documentation/DMA-API.txt +12 −0 Original line number Original line Diff line number Diff line Loading @@ -704,12 +704,24 @@ this directory the following files can currently be found: The current number of free dma_debug_entries The current number of free dma_debug_entries in the allocator. in the allocator. dma-api/driver-filter You can write a name of a driver into this file to limit the debug output to requests from that particular driver. Write an empty string to that file to disable the filter and see all errors again. If you have this code compiled into your kernel it will be enabled by default. If you have this code compiled into your kernel it will be enabled by default. If you want to boot without the bookkeeping anyway you can provide If you want to boot without the bookkeeping anyway you can provide 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging. 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging. Notice that you can not enable it again at runtime. You have to reboot to do Notice that you can not enable it again at runtime. You have to reboot to do so. so. If you want to see debug messages only for a special device driver you can specify the dma_debug_driver=<drivername> parameter. This will enable the driver filter at boot time. The debug code will only print errors for that driver afterwards. This filter can be disabled or changed later using debugfs. When the code disables itself at runtime this is most likely because it ran When the code disables itself at runtime this is most likely because it ran out of dma_debug_entries. These entries are preallocated at boot. The number out of dma_debug_entries. These entries are preallocated at boot. The number of preallocated entries is defined per architecture. If it is too low for you of preallocated entries is defined per architecture. If it is too low for you Loading
Documentation/DocBook/Makefile +2 −1 Original line number Original line Diff line number Diff line Loading @@ -13,7 +13,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ mac80211.xml debugobjects.xml sh.xml regulator.xml \ mac80211.xml debugobjects.xml sh.xml regulator.xml \ alsa-driver-api.xml writing-an-alsa-driver.xml alsa-driver-api.xml writing-an-alsa-driver.xml \ tracepoint.xml ### ### # The build process is as follows (targets): # The build process is as follows (targets): Loading
