Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit b6b5e76b authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Mark Brown
Browse files

ASoC: Add ssm2518 support 



This patch adds a ASoC CODEC driver for the SSM2516. The SSM2516 is a stereo
Class-D audio amplifier with an I2S interface for audio in and a built-in
dynamic range control processor.

Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent c7788792

Documentation/devicetree/bindings/sound/ssm2518.txt

0 → 100644
+20 −0
Original line number Diff line number Diff line 
SSM2518 audio amplifier



This device supports I2C only.



Required properties:

  - compatible : Must be "adi,ssm2518"

  - reg : the I2C address of the device. This will either be 0x34 (ADDR pin low)

	or 0x35 (ADDR pin high)



Optional properties:

  - gpios : GPIO connected to the nSD pin. If the property is not present it is

	        assumed that the nSD pin is hardwired to always on.



Example:



	ssm2518: ssm2518@34 {

		compatible = "adi,ssm2518";

		reg = <0x34>;

		gpios = <&gpio 5 0>;

	};

include/linux/platform_data/ssm2518.h

0 → 100644
+22 −0
Original line number Diff line number Diff line 
/*

 * SSM2518 amplifier audio driver

 *

 * Copyright 2013 Analog Devices Inc.

 *  Author: Lars-Peter Clausen <lars@metafoo.de>

 *

 * Licensed under the GPL-2.

 */



#ifndef __LINUX_PLATFORM_DATA_SSM2518_H__

#define __LINUX_PLATFORM_DATA_SSM2518_H__



/**

 * struct ssm2518_platform_data - Platform data for the ssm2518 driver

 * @enable_gpio: GPIO connected to the nSD pin. Set to -1 if the nSD pin is

 *            hardwired.

 */

struct ssm2518_platform_data {

	int enable_gpio;

};



#endif

sound/soc/codecs/Kconfig

+4 −0
Original line number Diff line number Diff line
@@ -60,6 +60,7 @@ config SND_SOC_ALL_CODECS 
	select SND_SOC_SI476X if MFD_SI476X_CORE

	select SND_SOC_SN95031 if INTEL_SCU_IPC

	select SND_SOC_SPDIF

	select SND_SOC_SSM2518 if I2C

	select SND_SOC_SSM2602 if SND_SOC_I2C_AND_SPI

	select SND_SOC_STA32X if I2C

	select SND_SOC_STA529 if I2C
@@ -313,6 +314,9 @@ config SND_SOC_SN95031 
config SND_SOC_SPDIF

	tristate



config SND_SOC_SSM2518

	tristate



config SND_SOC_SSM2602

	tristate

sound/soc/codecs/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -52,6 +52,7 @@ snd-soc-si476x-objs := si476x.o 
snd-soc-sn95031-objs := sn95031.o

snd-soc-spdif-tx-objs := spdif_transciever.o

snd-soc-spdif-rx-objs := spdif_receiver.o

snd-soc-ssm2518-objs := ssm2518.o

snd-soc-ssm2602-objs := ssm2602.o

snd-soc-sta32x-objs := sta32x.o

snd-soc-sta529-objs := sta529.o
@@ -176,6 +177,7 @@ obj-$(CONFIG_SND_SOC_SIGMADSP) += snd-soc-sigmadsp.o 
obj-$(CONFIG_SND_SOC_SI476X)	+= snd-soc-si476x.o

obj-$(CONFIG_SND_SOC_SN95031)	+=snd-soc-sn95031.o

obj-$(CONFIG_SND_SOC_SPDIF)	+= snd-soc-spdif-rx.o snd-soc-spdif-tx.o

obj-$(CONFIG_SND_SOC_SSM2518)	+= snd-soc-ssm2518.o

obj-$(CONFIG_SND_SOC_SSM2602)	+= snd-soc-ssm2602.o

obj-$(CONFIG_SND_SOC_STA32X)   += snd-soc-sta32x.o

obj-$(CONFIG_SND_SOC_STA529)   += snd-soc-sta529.o