Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit b69d42b5 authored by Jarkko Nikula's avatar Jarkko Nikula Committed by Mark Brown
Browse files

spi: pxa2xx: Remove cr0 variable from struct chip_data 



There hasn't been need to carry chip->cr0 after SPI core started to
validate speed_hz and bits_per_word transfer parameters. That effectively
caused that pump_transfers() always recalculated it and practically
chip->cr0 is used locally in setup() for debug prints only.

Signed-off-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 196b0e2c

drivers/spi/spi-pxa2xx.c

+4 −6
Original line number Diff line number Diff line
@@ -1101,6 +1101,7 @@ static int setup(struct spi_device *spi) 
	struct driver_data *drv_data = spi_master_get_devdata(spi->master);

	unsigned int clk_div;

	uint tx_thres, tx_hi_thres, rx_thres;

	u32 cr0;



	switch (drv_data->ssp_type) {

	case QUARK_X1000_SSP:
@@ -1193,8 +1194,6 @@ static int setup(struct spi_device *spi) 


	clk_div = pxa2xx_ssp_get_clk_div(drv_data, chip, spi->max_speed_hz);



	chip->cr0 = pxa2xx_configure_sscr0(drv_data, clk_div,

					   spi->bits_per_word);

	switch (drv_data->ssp_type) {

	case QUARK_X1000_SSP:

		chip->threshold = (QUARK_X1000_SSCR1_RxTresh(rx_thres)
@@ -1216,15 +1215,16 @@ static int setup(struct spi_device *spi) 
		chip->cr1 |= SSCR1_LBM;



	/* NOTE:  PXA25x_SSP _could_ use external clocking ... */

	cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, spi->bits_per_word);

	if (!pxa25x_ssp_comp(drv_data))

		dev_dbg(&spi->dev, "%ld Hz actual, %s\n",

			drv_data->max_clk_rate

				/ (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)),

				/ (1 + ((cr0 & SSCR0_SCR(0xfff)) >> 8)),

			chip->enable_dma ? "DMA" : "PIO");

	else

		dev_dbg(&spi->dev, "%ld Hz actual, %s\n",

			drv_data->max_clk_rate / 2

				/ (1 + ((chip->cr0 & SSCR0_SCR(0x0ff)) >> 8)),

				/ (1 + ((cr0 & SSCR0_SCR(0x0ff)) >> 8)),

			chip->enable_dma ? "DMA" : "PIO");



	if (spi->bits_per_word <= 8) {
@@ -1236,8 +1236,6 @@ static int setup(struct spi_device *spi) 
		chip->read = u16_reader;

		chip->write = u16_writer;

	} else if (spi->bits_per_word <= 32) {

		if (!is_quark_x1000_ssp(drv_data))

			chip->cr0 |= SSCR0_EDSS;

		chip->n_bytes = 4;

		chip->read = u32_reader;

		chip->write = u32_writer;

drivers/spi/spi-pxa2xx.h

+0 −1
Original line number Diff line number Diff line
@@ -86,7 +86,6 @@ struct driver_data { 
};



struct chip_data {

	u32 cr0;

	u32 cr1;

	u32 dds_rate;

	u32 psp;