ARM: mx3/mx31_3ds: fold board header in its only user

#include <asm/memory.h>

#include <asm/mach/map.h>

#include <mach/common.h>

#include <mach/board-mx31_3ds.h>

#include <mach/imx-uart.h>

#include <mach/iomux-mx3.h>

#include <mach/mxc_nand.h>

#include <mach/spi.h>

#include "devices.h"

/*!

 * @file mx31_3ds.c

 *

 * @brief This file contains the board-specific initialization routines.

 *

 * @ingroup System

/* Definitions for components on the Debug board */

/* Base address of CPLD controller on the Debug board */

#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)

/* LAN9217 ethernet base address */

#define LAN9217_BASE_ADDR		MX3x_CS5_BASE_ADDR

/* CPLD config and interrupt base address */

#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)

/* status, interrupt */

#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)

#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)

#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)

/* magic word for debug CPLD */

#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)

#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)

/* CPLD code version */

#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)

/* magic word for debug CPLD */

#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)

/* CPLD IRQ line for external uart, external ethernet etc */

#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)

#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)

#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)

#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)

#define MXC_MAX_EXP_IO_LINES	16

/*

 * This file contains the board-specific initialization routines.

 */

static int mx31_3ds_pins[] = {

/*

 * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.

 */

/*

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */

#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__

#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__

/* Definitions for components on the Debug board */

/* Base address of CPLD controller on the Debug board */

#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(CS5_BASE_ADDR)

/* LAN9217 ethernet base address */

#define LAN9217_BASE_ADDR		CS5_BASE_ADDR

/* CPLD config and interrupt base address */

#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)

/* LED switchs */

#define CPLD_LED_REG			(CPLD_ADDR + 0x00)

/* buttons */

#define CPLD_SWITCH_BUTTONS_REG	(EXPIO_ADDR + 0x08)

/* status, interrupt */

#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)

#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)

#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)

/* magic word for debug CPLD */

#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)

#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)

/* CPLD code version */

#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)

/* magic word for debug CPLD */

#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)

/* module reset register */

#define CPLD_MODULE_RESET_REG		(CPLD_ADDR + 0x60)

/* CPU ID and Personality ID */

#define CPLD_MCU_BOARD_ID_REG		(CPLD_ADDR + 0x68)

/* CPLD IRQ line for external uart, external ethernet etc */

#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)

#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)

#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)

#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)

#define EXPIO_INT_XUART_A	(MXC_EXP_IO_BASE + 1)

#define EXPIO_INT_XUART_B	(MXC_EXP_IO_BASE + 2)

#define EXPIO_INT_BUTTON_A	(MXC_EXP_IO_BASE + 3)

#define EXPIO_INT_BUTTON_B	(MXC_EXP_IO_BASE + 4)

#define MXC_MAX_EXP_IO_LINES	16

#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */