Merge branch 'master'

 -->

!Edrivers/pci/msi.c

!Edrivers/pci/bus.c

!Edrivers/pci/hotplug.c

<!-- FIXME: Removed for now since no structured comments in source

X!Edrivers/pci/hotplug.c

-->

!Edrivers/pci/probe.c

!Edrivers/pci/rom.c

     </sect1>

!Edrivers/usb/core/hcd.c

!Edrivers/usb/core/hcd-pci.c

!Edrivers/usb/core/buffer.c

!Idrivers/usb/core/buffer.c

    </chapter>

    <chapter>

0. Status

~~~~~~~~~

The p1k is a relatively cheap usb 1.1 phone with:

  - keyboard		full support, yealink.ko / input event API

  - LCD			full support, yealink.ko / sysfs API

1. Compilation (stand alone version)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Currently only kernel 2.6.x.y versions are supported.

In order to build the yealink.ko module do:

In order to build the yealink.ko module do

  make

are located, default /usr/src/linux.

1.1 Troubleshooting

~~~~~~~~~~~~~~~~~~~

Q: Module yealink compiled and installed without any problem but phone

   is not initialized and does not react to any actions.

A: If you see something like:

   hiddev0: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone

   in dmesg, it means that the hid driver has grabbed the device first. Try to

   load module yealink before any other usb hid driver. Please see the

   instructions provided by your distribution on module configuration.

Q: Phone is working now (displays version and accepts keypad input) but I can't

   find the sysfs files.

A: The sysfs files are located on the particular usb endpoint. On most

   distributions you can do: "find /sys/ -name get_icons" for a hint.

2. keyboard features

~~~~~~~~~~~~~~~~~~~~

	uart6850=	[HW,OSS]

			Format: <io>,<irq>

	usb-handoff	[HW] Enable early USB BIOS -> OS handoff

	usbhid.mousepoll=

			[USBHID] The interval which mice are to be polled at.

README for MIPS AU1XXX IDE driver - Released 2005-07-15

ABOUT

-----

This file describes the 'drivers/ide/mips/au1xxx-ide.c', related files and the

services they provide.

If you are short in patience and just want to know how to add your hard disc to

the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST'

section.

LICENSE

-------

Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions

This program is free software; you can redistribute it and/or modify it under

the terms of the GNU General Public License as published by the Free Software

Foundation; either version 2 of the License, or (at your option) any later

version.

THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR

BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

You should have received a copy of the GNU General Public License along with

this program; if not, write to the Free Software Foundation, Inc.,

675 Mass Ave, Cambridge, MA 02139, USA.

Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE

      Interface and Linux Device Driver" Application Note.

FILES, CONFIGS AND COMPATABILITY

--------------------------------

Two files are introduced:

  a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h'

     containes : struct _auide_hwif

                 struct drive_list_entry dma_white_list

                 struct drive_list_entry dma_black_list

                 timing parameters for PIO mode 0/1/2/3/4

                 timing parameters for MWDMA 0/1/2

  b) 'drivers/ide/mips/au1xxx-ide.c'

     contains the functionality of the AU1XXX IDE driver

Four configs variables are introduced:

  CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA    - enable the PIO+DBDMA mode

  CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA  - enable the MWDMA mode

  CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA

                                           controler

  CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size

                                           per descriptor

If MWDMA is enabled and the connected hard disc is not on the white list, the

kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE

performance is substantial slower then in full speed mwdma. In this case

please add your hard disc to the white list (follow instruction from 'ADD NEW

HARD DISC TO WHITE OR BLACK LIST' section).

SUPPORTED IDE MODES

-------------------

The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all

MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode.

To change the PIO mode use the program hdparm with option -p, e.g.

'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option

-X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0.

PERFORMANCE CONFIGURATIONS

--------------------------

If the used system doesn't need USB support enable the following kernel configs:

CONFIG_IDE=y

CONFIG_BLK_DEV_IDE=y

CONFIG_IDE_GENERIC=y

CONFIG_BLK_DEV_IDEPCI=y

CONFIG_BLK_DEV_GENERIC=y

CONFIG_BLK_DEV_IDEDMA_PCI=y

CONFIG_IDEDMA_PCI_AUTO=y

CONFIG_BLK_DEV_IDE_AU1XXX=y

CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y

CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON=y

CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128

CONFIG_BLK_DEV_IDEDMA=y

CONFIG_IDEDMA_AUTO=y

If the used system need the USB support enable the following kernel configs for

high IDE to USB throughput.

CONFIG_BLK_DEV_IDEDISK=y

CONFIG_IDE_GENERIC=y

CONFIG_BLK_DEV_IDEPCI=y

CONFIG_BLK_DEV_GENERIC=y

CONFIG_BLK_DEV_IDEDMA_PCI=y

CONFIG_IDEDMA_PCI_AUTO=y

CONFIG_BLK_DEV_IDE_AU1XXX=y

CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y

CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128

CONFIG_BLK_DEV_IDEDMA=y

CONFIG_IDEDMA_AUTO=y

ADD NEW HARD DISC TO WHITE OR BLACK LIST

----------------------------------------

Step 1 : detect the model name of your hard disc

  a) connect your hard disc to the AU1XXX

  b) boot your kernel and get the hard disc model.

     Example boot log:

     --snipped--

     Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

     ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

     Au1xxx IDE(builtin) configured for MWDMA2

     Probing IDE interface ide0...

     hda: Maxtor 6E040L0, ATA DISK drive

     ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64

     hda: max request size: 64KiB

     hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA

     --snipped--

     In this example 'Maxtor 6E040L0'.

Step  2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h'

  Add your hard disc to the dma_white_list or dma_black_list structur.

Step 3 : Recompile the kernel

  Enable MWDMA support in the kernel configuration. Recompile the kernel and

  reboot.

Step 4 : Tests

  If you have add a hard disc to the white list, please run some stress tests

  for verification.

ACKNOWLEDGMENTS

---------------

These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX

IDE driver from AMD.

Additional input also from:

Matthias Lenk <matthias.lenk@amd.com>

Happy hacking!

Enrico Walther <enrico.walther@amd.com>