Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a96a27f9 authored by Tomas Winkler's avatar Tomas Winkler Committed by John W. Linville
Browse files

iwlwifi: run through spell checker 



Signed-off-by: default avatarTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: default avatarReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 127901ab

drivers/net/wireless/iwlwifi/iwl-3945-commands.h

+3 −3
Original line number Diff line number Diff line
@@ -121,7 +121,7 @@ enum { 
	REPLY_TX_PWR_TABLE_CMD = 0x97,

	MEASURE_ABORT_NOTIFICATION = 0x99,	/* not used */



	/* Bluetooth device coexistance config command */

	/* Bluetooth device coexistence config command */

	REPLY_BT_CONFIG = 0x9b,



	/* Statistics */
@@ -158,7 +158,7 @@ struct iwl3945_cmd_header { 
	u8 cmd;		/* Command ID:  REPLY_RXON, etc. */

	u8 flags;	/* IWL_CMD_* */

	/*

	 * The driver sets up the sequence number to values of its chosing.

	 * The driver sets up the sequence number to values of its choosing.

	 * uCode does not use this value, but passes it back to the driver

	 * when sending the response to each driver-originated command, so

	 * the driver can match the response to the command.  Since the values
@@ -991,7 +991,7 @@ struct iwl3945_rate_scaling_cmd { 
 *

 * 3945 and 4965 support hardware handshake with Bluetooth device on

 * same platform.  Bluetooth device alerts wireless device when it will Tx;

 * wireless device can delay or kill its own Tx to accomodate.

 * wireless device can delay or kill its own Tx to accommodate.

 */

struct iwl3945_bt_cmd {

	u8 flags;

drivers/net/wireless/iwlwifi/iwl-3945-io.h

+1 −1
Original line number Diff line number Diff line
@@ -53,7 +53,7 @@ 
 * _iwl3945_read32.)

 *

 * These declarations are *extremely* useful in quickly isolating code deltas

 * which result in misconfiguring of the hardware I/O.  In combination with

 * which result in misconfiguration of the hardware I/O.  In combination with

 * git-bisect and the IO debug level you can quickly determine the specific

 * commit which breaks the IO sequence to the hardware.

 *

drivers/net/wireless/iwlwifi/iwl-3945.c

+2 −2
Original line number Diff line number Diff line
@@ -200,7 +200,7 @@ static int iwl3945_hwrate_to_plcp_idx(u8 plcp) 
 * priv->eeprom  is used to determine if antenna AUX/MAIN are reversed

 * priv->antenna specifies the antenna diversity mode:

 *

 * IWL_ANTENNA_DIVERISTY - NIC selects best antenna by itself

 * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself

 * IWL_ANTENNA_MAIN      - Force MAIN antenna

 * IWL_ANTENNA_AUX       - Force AUX antenna

 */
@@ -1882,7 +1882,7 @@ static int iwl3945_hw_reg_comp_txpower_temp(struct iwl3945_priv *priv) 
		ref_temp = (s16)priv->eeprom.groups[ch_info->group_index].

		    temperature;



		/* get power index adjustment based on curr and factory

		/* get power index adjustment based on current and factory

		 * temps */

		delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,

							      ref_temp);

drivers/net/wireless/iwlwifi/iwl-4965-hw.h

+6 −6
Original line number Diff line number Diff line
@@ -71,7 +71,7 @@ 


#include "iwl-fh.h"



/* EERPROM */

/* EEPROM */

#define IWL4965_EEPROM_IMG_SIZE			1024



/*
@@ -344,7 +344,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) 
 *     "4965 temperature calculation".

 *

 *     If current temperature is higher than factory temperature, driver must

 *     increase gain (lower gain table index), and vice versa.

 *     increase gain (lower gain table index), and vice verse.

 *

 *     Temperature affects gain differently for different channels:

 *

drivers/net/wireless/iwlwifi/iwl-4965.c

+5 −5
Original line number Diff line number Diff line
@@ -324,7 +324,7 @@ static u16 iwl4965_eeprom_calib_version(struct iwl_priv *priv) 
}



/*

 * Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask

 * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask

 * must be called under priv->lock and mac access

 */

static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask)
@@ -396,7 +396,7 @@ static void iwl4965_nic_config(struct iwl_priv *priv) 


	/* L1 is enabled by BIOS */

	if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)

		/* diable L0S disabled L1A enabled */

		/* disable L0S disabled L1A enabled */

		iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);

	else

		/* L0S enabled L1A disabled */
@@ -625,7 +625,7 @@ static void iwl4965_bg_txpower_work(struct work_struct *work) 


	mutex_lock(&priv->mutex);



	/* Regardless of if we are assocaited, we must reconfigure the

	/* Regardless of if we are associated, we must reconfigure the

	 * TX power since frames can be sent on non-radar channels while

	 * not associated */

	iwl4965_send_tx_power(priv);
@@ -2019,7 +2019,7 @@ static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp) 
}



/**

 * iwl4965_tx_status_reply_tx - Handle Tx rspnse for frames in aggregation queue

 * iwl4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue

 */

static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv,

				      struct iwl_ht_agg *agg,