Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 9d8f057a authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge master.kernel.org:/home/rmk/linux-2.6-serial 

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] Merge avlab serial board entries in parport_serial
  [SERIAL] kernel console should send CRLF not LFCR
parents 591eb85e 91bca4b3

drivers/parport/parport_serial.c

+18 −57
Original line number Diff line number Diff line
@@ -31,14 +31,8 @@ enum parport_pc_pci_cards { 
	netmos_9xx5_combo,

	netmos_9855,

	avlab_1s1p,

	avlab_1s1p_650,

	avlab_1s1p_850,

	avlab_1s2p,

	avlab_1s2p_650,

	avlab_1s2p_850,

	avlab_2s1p,

	avlab_2s1p_650,

	avlab_2s1p_850,

	siig_1s1p_10x,

	siig_2s1p_10x,

	siig_2p1s_20x,
@@ -85,14 +79,8 @@ static struct parport_pc_pci cards[] __devinitdata = { 
	/* netmos_9xx5_combo */		{ 1, { { 2, -1 }, }, netmos_parallel_init },

	/* netmos_9855 */		{ 1, { { 0, -1 }, }, netmos_parallel_init },

	/* avlab_1s1p     */		{ 1, { { 1, 2}, } },

	/* avlab_1s1p_650 */		{ 1, { { 1, 2}, } },

	/* avlab_1s1p_850 */		{ 1, { { 1, 2}, } },

	/* avlab_1s2p     */		{ 2, { { 1, 2}, { 3, 4 },} },

	/* avlab_1s2p_650 */		{ 2, { { 1, 2}, { 3, 4 },} },

	/* avlab_1s2p_850 */		{ 2, { { 1, 2}, { 3, 4 },} },

	/* avlab_2s1p     */		{ 1, { { 2, 3}, } },

	/* avlab_2s1p_650 */		{ 1, { { 2, 3}, } },

	/* avlab_2s1p_850 */		{ 1, { { 2, 3}, } },

	/* siig_1s1p_10x */		{ 1, { { 3, 4 }, } },

	/* siig_2s1p_10x */		{ 1, { { 4, 5 }, } },

	/* siig_2p1s_20x */		{ 2, { { 1, 2 }, { 3, 4 }, } },
@@ -119,15 +107,24 @@ static struct pci_device_id parport_serial_pci_tbl[] = { 
	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,

	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },

	/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/

	{ 0x14db, 0x2110, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p},

	{ 0x14db, 0x2111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p_650},

	{ 0x14db, 0x2112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p_850},

	{ 0x14db, 0x2140, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p},

	{ 0x14db, 0x2141, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p_650},

	{ 0x14db, 0x2142, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p_850},

	{ 0x14db, 0x2160, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p},

	{ 0x14db, 0x2161, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p_650},

	{ 0x14db, 0x2162, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p_850},

	{ PCI_VENDOR_ID_AFAVLAB, 0x2110,

	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },

	{ PCI_VENDOR_ID_AFAVLAB, 0x2111,

	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },

	{ PCI_VENDOR_ID_AFAVLAB, 0x2112,

	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },

	{ PCI_VENDOR_ID_AFAVLAB, 0x2140,

	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },

	{ PCI_VENDOR_ID_AFAVLAB, 0x2141,

	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },

	{ PCI_VENDOR_ID_AFAVLAB, 0x2142,

	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },

	{ PCI_VENDOR_ID_AFAVLAB, 0x2160,

	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },

	{ PCI_VENDOR_ID_AFAVLAB, 0x2161,

	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },

	{ PCI_VENDOR_ID_AFAVLAB, 0x2162,

	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },

	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,

	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },

	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
@@ -201,54 +198,18 @@ static struct pciserial_board pci_parport_serial_boards[] __devinitdata = { 
		.base_baud	= 115200,

		.uart_offset	= 8,

	},

	[avlab_1s1p_650] = { /* nt */

		.flags		= FL_BASE0 | FL_BASE_BARS,

		.num_ports	= 1,

		.base_baud	= 115200,

		.uart_offset	= 8,

	},

	[avlab_1s1p_850] = { /* nt */

		.flags		= FL_BASE0 | FL_BASE_BARS,

		.num_ports	= 1,

		.base_baud	= 115200,

		.uart_offset	= 8,

	},

	[avlab_1s2p] = { /* n/t */

		.flags		= FL_BASE0 | FL_BASE_BARS,

		.num_ports	= 1,

		.base_baud	= 115200,

		.uart_offset	= 8,

	},

	[avlab_1s2p_650] = { /* nt */

		.flags		= FL_BASE0 | FL_BASE_BARS,

		.num_ports	= 1,

		.base_baud	= 115200,

		.uart_offset	= 8,

	},

	[avlab_1s2p_850] = { /* nt */

		.flags		= FL_BASE0 | FL_BASE_BARS,

		.num_ports	= 1,

		.base_baud	= 115200,

		.uart_offset	= 8,

	},

	[avlab_2s1p] = { /* n/t */

		.flags		= FL_BASE0 | FL_BASE_BARS,

		.num_ports	= 2,

		.base_baud	= 115200,

		.uart_offset	= 8,

	},

	[avlab_2s1p_650] = { /* nt */

		.flags		= FL_BASE0 | FL_BASE_BARS,

		.num_ports	= 2,

		.base_baud	= 115200,

		.uart_offset	= 8,

	},

	[avlab_2s1p_850] = { /* nt */

		.flags		= FL_BASE0 | FL_BASE_BARS,

		.num_ports	= 2,

		.base_baud	= 115200,

		.uart_offset	= 8,

	},

	[siig_1s1p_10x] = {

		.flags		= FL_BASE2,

		.num_ports	= 1,

drivers/serial/21285.c

+7 −12
Original line number Diff line number Diff line
@@ -375,23 +375,18 @@ static void serial21285_setup_ports(void) 
}



#ifdef CONFIG_SERIAL_21285_CONSOLE

static void serial21285_console_putchar(struct uart_port *port, int ch)

{

	while (*CSR_UARTFLG & 0x20)

		barrier();

	*CSR_UARTDR = ch;

}



static void

serial21285_console_write(struct console *co, const char *s,

			  unsigned int count)

{

	int i;



	for (i = 0; i < count; i++) {

		while (*CSR_UARTFLG & 0x20)

			barrier();

		*CSR_UARTDR = s[i];

		if (s[i] == '\n') {

			while (*CSR_UARTFLG & 0x20)

				barrier();

			*CSR_UARTDR = '\r';

		}

	}

	uart_console_write(&serial21285_port, s, count, serial21285_console_putchar);

}



static void __init

drivers/serial/8250.c

+9 −17
Original line number Diff line number Diff line
@@ -2182,6 +2182,14 @@ static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) 
	}

}



static void serial8250_console_putchar(struct uart_port *port, int ch)

{

	struct uart_8250_port *up = (struct uart_8250_port *)port;



	wait_for_xmitr(up, UART_LSR_THRE);

	serial_out(up, UART_TX, ch);

}



/*

 *	Print a string to the serial port trying not to disturb

 *	any possible real use of the port...
@@ -2193,7 +2201,6 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) 
{

	struct uart_8250_port *up = &serial8250_ports[co->index];

	unsigned int ier;

	int i;



	touch_nmi_watchdog();
@@ -2207,22 +2214,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) 
	else

		serial_out(up, UART_IER, 0);



	/*

	 *	Now, do each character

	 */

	for (i = 0; i < count; i++, s++) {

		wait_for_xmitr(up, UART_LSR_THRE);



		/*

		 *	Send the character out.

		 *	If a LF, also do CR...

		 */

		serial_out(up, UART_TX, *s);

		if (*s == 10) {

			wait_for_xmitr(up, UART_LSR_THRE);

			serial_out(up, UART_TX, 13);

		}

	}

	uart_console_write(&up->port, s, count, serial8250_console_putchar);



	/*

	 *	Finally, wait for transmitter to become empty

drivers/serial/8250_early.c

+2 −7
Original line number Diff line number Diff line
@@ -74,7 +74,7 @@ static void __init wait_for_xmitr(struct uart_port *port) 
	}

}



static void __init putc(struct uart_port *port, unsigned char c)

static void __init putc(struct uart_port *port, int c)

{

	wait_for_xmitr(port);

	serial_out(port, UART_TX, c);
@@ -89,12 +89,7 @@ static void __init early_uart_write(struct console *console, const char *s, unsi 
	ier = serial_in(port, UART_IER);

	serial_out(port, UART_IER, 0);



	while (*s && count-- > 0) {

		putc(port, *s);

		if (*s == '\n')

			putc(port, '\r');

		s++;

	}

	uart_console_write(port, s, count, putc);



	/* Wait for transmitter to become empty and restore the IER */

	wait_for_xmitr(port);

drivers/serial/amba-pl010.c

+8 −16
Original line number Diff line number Diff line
@@ -591,12 +591,18 @@ static struct uart_amba_port amba_ports[UART_NR] = { 


#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE



static void pl010_console_putchar(struct uart_port *port, int ch)

{

	while (!UART_TX_READY(UART_GET_FR(port)))

		barrier();

	UART_PUT_CHAR(port, ch);

}



static void

pl010_console_write(struct console *co, const char *s, unsigned int count)

{

	struct uart_port *port = &amba_ports[co->index].port;

	unsigned int status, old_cr;

	int i;



	/*

	 *	First save the CR then disable the interrupts
@@ -604,21 +610,7 @@ pl010_console_write(struct console *co, const char *s, unsigned int count) 
	old_cr = UART_GET_CR(port);

	UART_PUT_CR(port, UART01x_CR_UARTEN);



	/*

	 *	Now, do each character

	 */

	for (i = 0; i < count; i++) {

		do {

			status = UART_GET_FR(port);

		} while (!UART_TX_READY(status));

		UART_PUT_CHAR(port, s[i]);

		if (s[i] == '\n') {

			do {

				status = UART_GET_FR(port);

			} while (!UART_TX_READY(status));

			UART_PUT_CHAR(port, '\r');

		}

	}

	uart_console_write(port, s, count, pl010_console_putchar);



	/*

	 *	Finally, wait for transmitter to become empty