Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 98267311 authored by Zefir Kurtisi's avatar Zefir Kurtisi Committed by David S. Miller
Browse files

at803x: fix suspend/resume for SGMII link 



When operating the at803x in SGMII mode, resuming the chip
from power down brings up the copper-side link but leaves
the SGMII link in unconnected state (tested with at8031
attached to gianfar). In effect, this caused a permanent
link loss once the related interface was put down.

This patch ensures that power down handling in supspend()
and resume() is also applied to the SGMII link.

Signed-off-by: default avatarZefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 5d608414

drivers/net/phy/at803x.c

+26 −0
Original line number Diff line number Diff line
@@ -52,6 +52,9 @@ 
#define AT803X_DEBUG_REG_5			0x05

#define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)



#define AT803X_REG_CHIP_CONFIG			0x1f

#define AT803X_BT_BX_REG_SEL			0x8000



#define ATH8030_PHY_ID 0x004dd076

#define ATH8031_PHY_ID 0x004dd074

#define ATH8035_PHY_ID 0x004dd072
@@ -206,6 +209,7 @@ static int at803x_suspend(struct phy_device *phydev) 
{

	int value;

	int wol_enabled;

	int ccr;



	mutex_lock(&phydev->lock);
@@ -221,6 +225,16 @@ static int at803x_suspend(struct phy_device *phydev) 


	phy_write(phydev, MII_BMCR, value);



	if (phydev->interface != PHY_INTERFACE_MODE_SGMII)

		goto done;



	/* also power-down SGMII interface */

	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);

	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);

	phy_write(phydev, MII_BMCR, phy_read(phydev, MII_BMCR) | BMCR_PDOWN);

	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);



done:

	mutex_unlock(&phydev->lock);



	return 0;
@@ -229,6 +243,7 @@ static int at803x_suspend(struct phy_device *phydev) 
static int at803x_resume(struct phy_device *phydev)

{

	int value;

	int ccr;



	mutex_lock(&phydev->lock);
@@ -236,6 +251,17 @@ static int at803x_resume(struct phy_device *phydev) 
	value &= ~(BMCR_PDOWN | BMCR_ISOLATE);

	phy_write(phydev, MII_BMCR, value);



	if (phydev->interface != PHY_INTERFACE_MODE_SGMII)

		goto done;



	/* also power-up SGMII interface */

	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);

	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);

	value = phy_read(phydev, MII_BMCR) & ~(BMCR_PDOWN | BMCR_ISOLATE);

	phy_write(phydev, MII_BMCR, value);

	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);



done:

	mutex_unlock(&phydev->lock);



	return 0;