Loading Documentation/ABI/testing/sysfs-class-mei +15 −0 Original line number Diff line number Diff line Loading @@ -14,3 +14,18 @@ Description: The /sys/class/mei/meiN directory is created for each probed mei device What: /sys/class/mei/meiN/fw_status Date: Nov 2014 KernelVersion: 3.19 Contact: Tomas Winkler <tomas.winkler@intel.com> Description: Display fw status registers content The ME FW writes its status information into fw status registers for BIOS and OS to monitor fw health. The register contains running state, power management state, error codes, and others. The way the registers are decoded depends on PCH or SoC generation. Also number of registers varies between 1 and 6 depending on generation. Documentation/ABI/testing/sysfs-platform-dell-laptopdeleted 100644 → 0 +0 −60 Original line number Diff line number Diff line What: /sys/class/leds/dell::kbd_backlight/als_setting Date: December 2014 KernelVersion: 3.19 Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>, Pali Rohár <pali.rohar@gmail.com> Description: This file allows to control the automatic keyboard illumination mode on some systems that have an ambient light sensor. Write 1 to this file to enable the auto mode, 0 to disable it. What: /sys/class/leds/dell::kbd_backlight/start_triggers Date: December 2014 KernelVersion: 3.19 Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>, Pali Rohár <pali.rohar@gmail.com> Description: This file allows to control the input triggers that turn on the keyboard backlight illumination that is disabled because of inactivity. Read the file to see the triggers available. The ones enabled are preceded by '+', those disabled by '-'. To enable a trigger, write its name preceded by '+' to this file. To disable a trigger, write its name preceded by '-' instead. For example, to enable the keyboard as trigger run: echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers To disable it: echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers Note that not all the available triggers can be configured. What: /sys/class/leds/dell::kbd_backlight/stop_timeout Date: December 2014 KernelVersion: 3.19 Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>, Pali Rohár <pali.rohar@gmail.com> Description: This file allows to specify the interval after which the keyboard illumination is disabled because of inactivity. The timeouts are expressed in seconds, minutes, hours and days, for which the symbols are 's', 'm', 'h' and 'd' respectively. To configure the timeout, write to this file a value along with any the above units. If no unit is specified, the value is assumed to be expressed in seconds. For example, to set the timeout to 10 minutes run: echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout Note that when this file is read, the returned value might be expressed in a different unit than the one used when the timeout was set. Also note that only some timeouts are supported and that some systems might fall back to a specific timeout in case an invalid timeout is written to this file. Documentation/devicetree/bindings/net/davinci_emac.txt +2 −1 Original line number Diff line number Diff line Loading @@ -4,7 +4,8 @@ This file provides information, what the device node for the davinci_emac interface contains. Required properties: - compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac" - compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or "ti,dm816-emac" - reg: Offset and length of the register set for the device - ti,davinci-ctrl-reg-offset: offset to control register - ti,davinci-ctrl-mod-reg-offset: offset to control module register Loading Documentation/kernel-parameters.txt +1 −0 Original line number Diff line number Diff line Loading @@ -1277,6 +1277,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. i8042.notimeout [HW] Ignore timeout condition signalled by controller i8042.reset [HW] Reset the controller during init and cleanup i8042.unlock [HW] Unlock (ignore) the keylock i8042.kbdreset [HW] Reset device connected to KBD port i810= [HW,DRM] Loading Documentation/networking/ip-sysctl.txt +2 −0 Original line number Diff line number Diff line Loading @@ -66,6 +66,8 @@ fwmark_reflect - BOOLEAN route/max_size - INTEGER Maximum number of routes allowed in the kernel. Increase this when using large numbers of interfaces and/or routes. From linux kernel 3.6 onwards, this is deprecated for ipv4 as route cache is no longer used. neigh/default/gc_thresh1 - INTEGER Minimum number of entries to keep. Garbage collector will not Loading Loading
Documentation/ABI/testing/sysfs-class-mei +15 −0 Original line number Diff line number Diff line Loading @@ -14,3 +14,18 @@ Description: The /sys/class/mei/meiN directory is created for each probed mei device What: /sys/class/mei/meiN/fw_status Date: Nov 2014 KernelVersion: 3.19 Contact: Tomas Winkler <tomas.winkler@intel.com> Description: Display fw status registers content The ME FW writes its status information into fw status registers for BIOS and OS to monitor fw health. The register contains running state, power management state, error codes, and others. The way the registers are decoded depends on PCH or SoC generation. Also number of registers varies between 1 and 6 depending on generation.
Documentation/ABI/testing/sysfs-platform-dell-laptopdeleted 100644 → 0 +0 −60 Original line number Diff line number Diff line What: /sys/class/leds/dell::kbd_backlight/als_setting Date: December 2014 KernelVersion: 3.19 Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>, Pali Rohár <pali.rohar@gmail.com> Description: This file allows to control the automatic keyboard illumination mode on some systems that have an ambient light sensor. Write 1 to this file to enable the auto mode, 0 to disable it. What: /sys/class/leds/dell::kbd_backlight/start_triggers Date: December 2014 KernelVersion: 3.19 Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>, Pali Rohár <pali.rohar@gmail.com> Description: This file allows to control the input triggers that turn on the keyboard backlight illumination that is disabled because of inactivity. Read the file to see the triggers available. The ones enabled are preceded by '+', those disabled by '-'. To enable a trigger, write its name preceded by '+' to this file. To disable a trigger, write its name preceded by '-' instead. For example, to enable the keyboard as trigger run: echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers To disable it: echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers Note that not all the available triggers can be configured. What: /sys/class/leds/dell::kbd_backlight/stop_timeout Date: December 2014 KernelVersion: 3.19 Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>, Pali Rohár <pali.rohar@gmail.com> Description: This file allows to specify the interval after which the keyboard illumination is disabled because of inactivity. The timeouts are expressed in seconds, minutes, hours and days, for which the symbols are 's', 'm', 'h' and 'd' respectively. To configure the timeout, write to this file a value along with any the above units. If no unit is specified, the value is assumed to be expressed in seconds. For example, to set the timeout to 10 minutes run: echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout Note that when this file is read, the returned value might be expressed in a different unit than the one used when the timeout was set. Also note that only some timeouts are supported and that some systems might fall back to a specific timeout in case an invalid timeout is written to this file.
Documentation/devicetree/bindings/net/davinci_emac.txt +2 −1 Original line number Diff line number Diff line Loading @@ -4,7 +4,8 @@ This file provides information, what the device node for the davinci_emac interface contains. Required properties: - compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac" - compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or "ti,dm816-emac" - reg: Offset and length of the register set for the device - ti,davinci-ctrl-reg-offset: offset to control register - ti,davinci-ctrl-mod-reg-offset: offset to control module register Loading
Documentation/kernel-parameters.txt +1 −0 Original line number Diff line number Diff line Loading @@ -1277,6 +1277,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. i8042.notimeout [HW] Ignore timeout condition signalled by controller i8042.reset [HW] Reset the controller during init and cleanup i8042.unlock [HW] Unlock (ignore) the keylock i8042.kbdreset [HW] Reset device connected to KBD port i810= [HW,DRM] Loading
Documentation/networking/ip-sysctl.txt +2 −0 Original line number Diff line number Diff line Loading @@ -66,6 +66,8 @@ fwmark_reflect - BOOLEAN route/max_size - INTEGER Maximum number of routes allowed in the kernel. Increase this when using large numbers of interfaces and/or routes. From linux kernel 3.6 onwards, this is deprecated for ipv4 as route cache is no longer used. neigh/default/gc_thresh1 - INTEGER Minimum number of entries to keep. Garbage collector will not Loading
