Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 94e9108b authored by Ed Lin's avatar Ed Lin Committed by James Bottomley
Browse files

[SCSI] stex: add new device type support 



Add support for st_vsc1 type device (st_vsc is ok because it does not
require extra buffer).

Signed-off-by: default avatarEd Lin <ed.lin@promise.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent ee926b27

drivers/scsi/stex.c

+21 −7
Original line number Diff line number Diff line
@@ -121,7 +121,8 @@ enum { 


	st_shasta				= 0,

	st_vsc					= 1,

	st_yosemite				= 2,

	st_vsc1					= 2,

	st_yosemite				= 3,



	PASSTHRU_REQ_TYPE			= 0x00000001,

	PASSTHRU_REQ_NO_WAKEUP			= 0x00000100,
@@ -151,6 +152,8 @@ enum { 
	MGT_CMD_SIGNATURE			= 0xba,



	INQUIRY_EVPD				= 0x01,



	ST_ADDITIONAL_MEM			= 0x200000,

};



/* SCSI inquiry data */
@@ -212,7 +215,9 @@ struct handshake_frame { 
	__le32 partner_ver_minor;

	__le32 partner_ver_oem;

	__le32 partner_ver_build;

	u32 reserved1[4];

	__le32 extra_offset;	/* NEW */

	__le32 extra_size;	/* NEW */

	u32 reserved1[2];

};



struct req_msg {
@@ -303,6 +308,7 @@ struct st_hba { 
	void __iomem *mmio_base;	/* iomapped PCI memory space */

	void *dma_mem;

	dma_addr_t dma_handle;

	size_t dma_size;



	struct Scsi_Host *host;

	struct pci_dev *pdev;
@@ -941,6 +947,11 @@ static int stex_handshake(struct st_hba *hba) 
	h->status_cnt = cpu_to_le16(MU_STATUS_COUNT);

	stex_gettime(&h->hosttime);

	h->partner_type = HMU_PARTNER_TYPE;

	if (hba->dma_size > STEX_BUFFER_SIZE) {

		h->extra_offset = cpu_to_le32(STEX_BUFFER_SIZE);

		h->extra_size = cpu_to_le32(ST_ADDITIONAL_MEM);

	} else

		h->extra_offset = h->extra_size = 0;



	status_phys = hba->dma_handle + MU_REQ_BUFFER_SIZE;

	writel(status_phys, base + IMR0);
@@ -1203,8 +1214,13 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id) 
		goto out_iounmap;

	}



	hba->cardtype = (unsigned int) id->driver_data;

	if (hba->cardtype == st_vsc && (pdev->subsystem_device & 0xf) == 0x1)

		hba->cardtype = st_vsc1;

	hba->dma_size = (hba->cardtype == st_vsc1) ?

		(STEX_BUFFER_SIZE + ST_ADDITIONAL_MEM) : (STEX_BUFFER_SIZE);

	hba->dma_mem = dma_alloc_coherent(&pdev->dev,

		STEX_BUFFER_SIZE, &hba->dma_handle, GFP_KERNEL);

		hba->dma_size, &hba->dma_handle, GFP_KERNEL);

	if (!hba->dma_mem) {

		err = -ENOMEM;

		printk(KERN_ERR DRV_NAME "(%s): dma mem alloc failed\n",
@@ -1217,8 +1233,6 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id) 
	hba->copy_buffer = hba->dma_mem + MU_BUFFER_SIZE;

	hba->mu_status = MU_STATE_STARTING;



	hba->cardtype = (unsigned int) id->driver_data;



	/* firmware uses id/lun pair for a logical drive, but lun would be

	   always 0 if CONFIG_SCSI_MULTI_LUN not configured, so we use

	   channel to map lun here */
@@ -1266,7 +1280,7 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id) 
out_free_irq:

	free_irq(pdev->irq, hba);

out_pci_free:

	dma_free_coherent(&pdev->dev, STEX_BUFFER_SIZE,

	dma_free_coherent(&pdev->dev, hba->dma_size,

			  hba->dma_mem, hba->dma_handle);

out_iounmap:

	iounmap(hba->mmio_base);
@@ -1327,7 +1341,7 @@ static void stex_hba_free(struct st_hba *hba) 


	pci_release_regions(hba->pdev);



	dma_free_coherent(&hba->pdev->dev, STEX_BUFFER_SIZE,

	dma_free_coherent(&hba->pdev->dev, hba->dma_size,

			  hba->dma_mem, hba->dma_handle);

}