Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 939723a4 authored May 09, 2012 by James Smart Committed by James Bottomley May 17, 2012

[SCSI] lpfc 8.3.31: Correct point-to-point mode discovery errors on LPe16xxx



Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

parent 27aa1b73

drivers/scsi/lpfc/lpfc_els.c

+77 −16

Original line number	Diff line number	Diff line
		@@ -230,27 +230,43 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,

		INIT_LIST_HEAD(&pbuflist->list);

		if (expectRsp) {
		icmd->un.elsreq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys);
		icmd->un.elsreq64.bdl.addrLow = putPaddrLow(pbuflist->phys);
		icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
		icmd->un.elsreq64.remoteID = did; /* DID */
		if (expectRsp) {
		icmd->un.elsreq64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));

		icmd->un.elsreq64.remoteID = did; /* DID */
		icmd->ulpCommand = CMD_ELS_REQUEST64_CR;
		icmd->ulpTimeout = phba->fc_ratov * 2;
		} else {
		icmd->un.elsreq64.bdl.bdeSize = sizeof(struct ulp_bde64);
		icmd->un.xseq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys);
		icmd->un.xseq64.bdl.addrLow = putPaddrLow(pbuflist->phys);
		icmd->un.xseq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
		icmd->un.xseq64.bdl.bdeSize = sizeof(struct ulp_bde64);
		icmd->un.xseq64.xmit_els_remoteID = did; /* DID */
		icmd->ulpCommand = CMD_XMIT_ELS_RSP64_CX;
		}
		icmd->ulpBdeCount = 1;
		icmd->ulpLe = 1;
		icmd->ulpClass = CLASS3;

		if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
		/*
		* If we have NPIV enabled, we want to send ELS traffic by VPI.
		* For SLI4, since the driver controls VPIs we also want to include
		* all ELS pt2pt protocol traffic as well.
		*/
		if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) \|\|
		((phba->sli_rev == LPFC_SLI_REV4) &&
		(vport->fc_flag & FC_PT2PT))) {

		if (expectRsp) {
		icmd->un.elsreq64.myID = vport->fc_myDID;

		/* For ELS_REQUEST64_CR, use the VPI by default */
		icmd->ulpContext = phba->vpi_ids[vport->vpi];
		}

		icmd->ulpCt_h = 0;
		/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
		if (elscmd == ELS_CMD_ECHO)
		@@ -438,9 +454,10 @@ lpfc_issue_reg_vfi(struct lpfc_vport *vport)
		int rc = 0;

		sp = &phba->fc_fabparam;
		/* move forward in case of SLI4 FC port loopback test */
		/* move forward in case of SLI4 FC port loopback test and pt2pt mode */
		if ((phba->sli_rev == LPFC_SLI_REV4) &&
		!(phba->link_flag & LS_LOOPBACK_MODE)) {
		!(phba->link_flag & LS_LOOPBACK_MODE) &&
		!(vport->fc_flag & FC_PT2PT)) {
		ndlp = lpfc_findnode_did(vport, Fabric_DID);
		if (!ndlp \|\| !NLP_CHK_NODE_ACT(ndlp)) {
		rc = -ENODEV;
		@@ -820,6 +837,17 @@ lpfc_cmpl_els_flogi_nport(struct lpfc_vport vport, struct lpfc_nodelist ndlp,
		mempool_free(mbox, phba->mbox_mem_pool);
		goto fail;
		}

		/*
		* For SLI4, the VFI/VPI are registered AFTER the
		* Nport with the higher WWPN sends the PLOGI with
		* an assigned NPortId.
		*/

		/* not equal */
		if ((phba->sli_rev == LPFC_SLI_REV4) && rc)
		lpfc_issue_reg_vfi(vport);

		/* Decrement ndlp reference count indicating that ndlp can be
		* safely released when other references to it are done.
		*/
		@@ -4940,8 +4968,6 @@ lpfc_els_rcv_flogi(struct lpfc_vport vport, struct lpfc_iocbq cmdiocb,
		return 1;
		}

		did = Fabric_DID;

		if ((lpfc_check_sparm(vport, ndlp, sp, CLASS3, 1))) {
		/* For a FLOGI we accept, then if our portname is greater
		* then the remote portname we initiate Nport login.
		@@ -4980,29 +5006,64 @@ lpfc_els_rcv_flogi(struct lpfc_vport vport, struct lpfc_iocbq cmdiocb,
		spin_lock_irq(shost->host_lock);
		vport->fc_flag \|= FC_PT2PT_PLOGI;
		spin_unlock_irq(shost->host_lock);

		/* If we have the high WWPN we can assign our own
		* myDID; otherwise, we have to WAIT for a PLOGI
		* from the remote NPort to find out what it
		* will be.
		*/
		vport->fc_myDID = PT2PT_LocalID;
		} else
		vport->fc_myDID = PT2PT_RemoteID;
		vport->port_state = LPFC_FLOGI;
		}

		/*
		* The vport state should go to LPFC_FLOGI only
		* AFTER we issue a FLOGI, not receive one.
		*/
		spin_lock_irq(shost->host_lock);
		vport->fc_flag \|= FC_PT2PT;
		vport->fc_flag &= ~(FC_FABRIC \| FC_PUBLIC_LOOP);
		spin_unlock_irq(shost->host_lock);

		/*
		* We temporarily set fc_myDID to make it look like we are
		* a Fabric. This is done just so we end up with the right
		* did / sid on the FLOGI ACC rsp.
		*/
		did = vport->fc_myDID;
		vport->fc_myDID = Fabric_DID;

		} else {
		/* Reject this request because invalid parameters */
		stat.un.b.lsRjtRsvd0 = 0;
		stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
		stat.un.b.lsRjtRsnCodeExp = LSEXP_SPARM_OPTIONS;
		stat.un.b.vendorUnique = 0;

		/*
		* We temporarily set fc_myDID to make it look like we are
		* a Fabric. This is done just so we end up with the right
		* did / sid on the FLOGI LS_RJT rsp.
		*/
		did = vport->fc_myDID;
		vport->fc_myDID = Fabric_DID;

		lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp,
		NULL);

		/* Now lets put fc_myDID back to what its supposed to be */
		vport->fc_myDID = did;

		return 1;
		}

		/* Send back ACC */
		lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, NULL);

		/* Now lets put fc_myDID back to what its supposed to be */
		vport->fc_myDID = did;

		if (!(vport->fc_flag & FC_PT2PT_PLOGI)) {

		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
		if (!mbox)
		goto fail;

drivers/scsi/lpfc/lpfc_hbadisc.c

+10 −5

Original line number	Diff line number	Diff line
		@@ -2882,9 +2882,14 @@ lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba phba, LPFC_MBOXQ_t mboxq)
		}

		if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
		/* For private loop just start discovery and we are done. */
		if ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
		!(vport->fc_flag & FC_PUBLIC_LOOP)) {
		/*
		* For private loop or for NPort pt2pt,
		* just start discovery and we are done.
		*/
		if ((vport->fc_flag & FC_PT2PT) \|\|
		((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
		!(vport->fc_flag & FC_PUBLIC_LOOP))) {

		/* Use loop map to make discovery list */
		lpfc_disc_list_loopmap(vport);
		/* Start discovery */
		@@ -5491,9 +5496,9 @@ lpfc_nlp_release(struct kref *kref)
		ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);

		lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
		"0279 lpfc_nlp_release: ndlp:x%p "
		"0279 lpfc_nlp_release: ndlp:x%p did %x "
		"usgmap:x%x refcnt:%d\n",
		(void *)ndlp, ndlp->nlp_usg_map,
		(void *)ndlp, ndlp->nlp_DID, ndlp->nlp_usg_map,
		atomic_read(&ndlp->kref.refcount));

		/* remove ndlp from action. */

drivers/scsi/lpfc/lpfc_hw.h

+3 −0

Original line number	Diff line number	Diff line
		@@ -3374,6 +3374,9 @@ typedef struct {
		WORD5 w5; /* Header control/status word */
		} XMT_SEQ_FIELDS64;

		/* This word is remote ports D_ID for XMIT_ELS_RSP64 */
		#define xmit_els_remoteID xrsqRo

		/* IOCB Command template for 64 bit RCV_SEQUENCE64 */
		typedef struct {
		struct ulp_bde64 rcvBde;

drivers/scsi/lpfc/lpfc_hw4.h

+7 −1

Original line number	Diff line number	Diff line
		@@ -3295,7 +3295,13 @@ struct els_request64_wqe {
		struct xmit_els_rsp64_wqe {
		struct ulp_bde64 bde;
		uint32_t response_payload_len;
		uint32_t rsvd4;
		uint32_t word4;
		#define els_rsp64_sid_SHIFT 0
		#define els_rsp64_sid_MASK 0x00FFFFFF
		#define els_rsp64_sid_WORD word4
		#define els_rsp64_sp_SHIFT 24
		#define els_rsp64_sp_MASK 0x00000001
		#define els_rsp64_sp_WORD word4
		struct wqe_did wqe_dest;
		struct wqe_common wqe_com; /* words 6-11 */
		uint32_t word12;

drivers/scsi/lpfc/lpfc_nportdisc.c

+9 −0

Original line number	Diff line number	Diff line
		@@ -367,8 +367,10 @@ lpfc_rcv_plogi(struct lpfc_vport vport, struct lpfc_nodelist ndlp,
		return 1;
		}

		/* Check for Nport to NPort pt2pt protocol */
		if ((vport->fc_flag & FC_PT2PT) &&
		!(vport->fc_flag & FC_PT2PT_PLOGI)) {

		/* rcv'ed PLOGI decides what our NPortId will be */
		vport->fc_myDID = icmd->un.rcvels.parmRo;
		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
		@@ -382,6 +384,13 @@ lpfc_rcv_plogi(struct lpfc_vport vport, struct lpfc_nodelist ndlp,
		mempool_free(mbox, phba->mbox_mem_pool);
		goto out;
		}
		/*
		* For SLI4, the VFI/VPI are registered AFTER the
		* Nport with the higher WWPN sends us a PLOGI with
		* our assigned NPortId.
		*/
		if (phba->sli_rev == LPFC_SLI_REV4)
		lpfc_issue_reg_vfi(vport);

		lpfc_can_disctmo(vport);
		}