Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 90df2cb1 authored by Jean Delvare's avatar Jean Delvare Committed by Jean Delvare
Browse files

i2c-i801: Remove verbose debugging messages 



Dumping the register values before and after every transaction was
useful during driver development but now it's only spamming the log.

Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent e3e7fc3c

drivers/i2c/busses/i2c-i801.c

+0 −18
Original line number Diff line number Diff line
@@ -138,11 +138,6 @@ static int i801_transaction(int xact) 
	int result = 0;

	int timeout = 0;



	dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "

		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),

		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),

		inb_p(SMBHSTDAT1));



	/* Make sure the SMBus host is ready to start transmitting */

	/* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */

	if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
@@ -202,10 +197,6 @@ static int i801_transaction(int xact) 
		dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "

			"(%02x)\n", temp);

	}

	dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "

		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),

		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),

		inb_p(SMBHSTDAT1));

	return result;

}
@@ -293,11 +284,6 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, 
		}

		outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);



		dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "

			"ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,

			inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),

			inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));



		/* Make sure the SMBus host is ready to start transmitting */

		temp = inb_p(SMBHSTSTS);

		if (i == 1) {
@@ -381,10 +367,6 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, 
				"Bad status (%02x) at end of transaction\n",

				temp);

		}

		dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "

			"ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,

			inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),

			inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));



		if (result < 0)

			return result;