Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 8ea2c864 authored by Jean-Christophe PLAGNIOL-VILLARD's avatar Jean-Christophe PLAGNIOL-VILLARD
Browse files

Merge branch 'fbdev-3.11' of git://gitorious.org/linux-omap-dss2/linux into fbdev/for-next

parents 317ddd25 ffa3fd21
Loading
Loading
Loading
Loading
+7 −3
Original line number Original line Diff line number Diff line
* Solomon SSD1307 Framebuffer Driver
* Solomon SSD1307 Framebuffer Driver


Required properties:
Required properties:
  - compatible: Should be "solomon,ssd1307fb-<bus>". The only supported bus for
  - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for
    now is i2c.
    now is i2c, and the supported chips are ssd1306 and ssd1307.
  - reg: Should contain address of the controller on the I2C bus. Most likely
  - reg: Should contain address of the controller on the I2C bus. Most likely
         0x3c or 0x3d
         0x3c or 0x3d
  - pwm: Should contain the pwm to use according to the OF device tree PWM
  - pwm: Should contain the pwm to use according to the OF device tree PWM
         specification [0]
         specification [0]. Only required for the ssd1307.
  - reset-gpios: Should contain the GPIO used to reset the OLED display
  - reset-gpios: Should contain the GPIO used to reset the OLED display
  - solomon,height: Height in pixel of the screen driven by the controller
  - solomon,width: Width in pixel of the screen driven by the controller
  - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is
    mapped to.


Optional properties:
Optional properties:
  - reset-active-low: Is the reset gpio is active on physical low?
  - reset-active-low: Is the reset gpio is active on physical low?
+42 −13
Original line number Original line Diff line number Diff line
@@ -53,21 +53,16 @@ static int parse_timing_property(struct device_node *np, const char *name,
}
}


/**
/**
 * of_get_display_timing - parse display_timing entry from device_node
 * of_parse_display_timing - parse display_timing entry from device_node
 * @np: device_node with the properties
 * @np: device_node with the properties
 **/
 **/
static struct display_timing *of_get_display_timing(struct device_node *np)
static int of_parse_display_timing(struct device_node *np,
		struct display_timing *dt)
{
{
	struct display_timing *dt;
	u32 val = 0;
	u32 val = 0;
	int ret = 0;
	int ret = 0;


	dt = kzalloc(sizeof(*dt), GFP_KERNEL);
	memset(dt, 0, sizeof(*dt));
	if (!dt) {
		pr_err("%s: could not allocate display_timing struct\n",
			of_node_full_name(np));
		return NULL;
	}


	ret |= parse_timing_property(np, "hback-porch", &dt->hback_porch);
	ret |= parse_timing_property(np, "hback-porch", &dt->hback_porch);
	ret |= parse_timing_property(np, "hfront-porch", &dt->hfront_porch);
	ret |= parse_timing_property(np, "hfront-porch", &dt->hfront_porch);
@@ -101,13 +96,39 @@ static struct display_timing *of_get_display_timing(struct device_node *np)
	if (ret) {
	if (ret) {
		pr_err("%s: error reading timing properties\n",
		pr_err("%s: error reading timing properties\n",
			of_node_full_name(np));
			of_node_full_name(np));
		kfree(dt);
		return -EINVAL;
		return NULL;
	}
	}


	return dt;
	return 0;
}
}


/**
 * of_get_display_timing - parse a display_timing entry
 * @np: device_node with the timing subnode
 * @name: name of the timing node
 * @dt: display_timing struct to fill
 **/
int of_get_display_timing(struct device_node *np, const char *name,
		struct display_timing *dt)
{
	struct device_node *timing_np;

	if (!np) {
		pr_err("%s: no devicenode given\n", of_node_full_name(np));
		return -EINVAL;
	}

	timing_np = of_find_node_by_name(np, name);
	if (!timing_np) {
		pr_err("%s: could not find node '%s'\n",
			of_node_full_name(np), name);
		return -ENOENT;
	}

	return of_parse_display_timing(timing_np, dt);
}
EXPORT_SYMBOL_GPL(of_get_display_timing);

/**
/**
 * of_get_display_timings - parse all display_timing entries from a device_node
 * of_get_display_timings - parse all display_timing entries from a device_node
 * @np: device_node with the subnodes
 * @np: device_node with the subnodes
@@ -174,9 +195,17 @@ struct display_timings *of_get_display_timings(struct device_node *np)


	for_each_child_of_node(timings_np, entry) {
	for_each_child_of_node(timings_np, entry) {
		struct display_timing *dt;
		struct display_timing *dt;
		int r;


		dt = of_get_display_timing(entry);
		dt = kzalloc(sizeof(*dt), GFP_KERNEL);
		if (!dt) {
		if (!dt) {
			pr_err("%s: could not allocate display_timing struct\n",
					of_node_full_name(np));
			goto timingfail;
		}

		r = of_parse_display_timing(entry, dt);
		if (r) {
			/*
			/*
			 * to not encourage wrong devicetrees, fail in case of
			 * to not encourage wrong devicetrees, fail in case of
			 * an error
			 * an error
+288 −104
Original line number Original line Diff line number Diff line
@@ -16,24 +16,50 @@
#include <linux/pwm.h>
#include <linux/pwm.h>
#include <linux/delay.h>
#include <linux/delay.h>


#define SSD1307FB_WIDTH			96
#define SSD1307FB_HEIGHT		16

#define SSD1307FB_DATA			0x40
#define SSD1307FB_DATA			0x40
#define SSD1307FB_COMMAND		0x80
#define SSD1307FB_COMMAND		0x80


#define SSD1307FB_SET_ADDRESS_MODE	0x20
#define SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL	(0x00)
#define SSD1307FB_SET_ADDRESS_MODE_VERTICAL	(0x01)
#define SSD1307FB_SET_ADDRESS_MODE_PAGE		(0x02)
#define SSD1307FB_SET_COL_RANGE		0x21
#define SSD1307FB_SET_PAGE_RANGE	0x22
#define SSD1307FB_CONTRAST		0x81
#define SSD1307FB_CONTRAST		0x81
#define	SSD1307FB_CHARGE_PUMP		0x8d
#define SSD1307FB_SEG_REMAP_ON		0xa1
#define SSD1307FB_SEG_REMAP_ON		0xa1
#define SSD1307FB_DISPLAY_OFF		0xae
#define SSD1307FB_DISPLAY_OFF		0xae
#define SSD1307FB_SET_MULTIPLEX_RATIO	0xa8
#define SSD1307FB_DISPLAY_ON		0xaf
#define SSD1307FB_DISPLAY_ON		0xaf
#define SSD1307FB_START_PAGE_ADDRESS	0xb0
#define SSD1307FB_START_PAGE_ADDRESS	0xb0
#define SSD1307FB_SET_DISPLAY_OFFSET	0xd3
#define	SSD1307FB_SET_CLOCK_FREQ	0xd5
#define	SSD1307FB_SET_PRECHARGE_PERIOD	0xd9
#define	SSD1307FB_SET_COM_PINS_CONFIG	0xda
#define	SSD1307FB_SET_VCOMH		0xdb

struct ssd1307fb_par;

struct ssd1307fb_ops {
	int (*init)(struct ssd1307fb_par *);
	int (*remove)(struct ssd1307fb_par *);
};


struct ssd1307fb_par {
struct ssd1307fb_par {
	struct i2c_client *client;
	struct i2c_client *client;
	u32 height;
	struct fb_info *info;
	struct fb_info *info;
	struct ssd1307fb_ops *ops;
	u32 page_offset;
	struct pwm_device *pwm;
	struct pwm_device *pwm;
	u32 pwm_period;
	u32 pwm_period;
	int reset;
	int reset;
	u32 width;
};

struct ssd1307fb_array {
	u8	type;
	u8	data[0];
};
};


static struct fb_fix_screeninfo ssd1307fb_fix = {
static struct fb_fix_screeninfo ssd1307fb_fix = {
@@ -43,68 +69,87 @@ static struct fb_fix_screeninfo ssd1307fb_fix = {
	.xpanstep	= 0,
	.xpanstep	= 0,
	.ypanstep	= 0,
	.ypanstep	= 0,
	.ywrapstep	= 0,
	.ywrapstep	= 0,
	.line_length	= SSD1307FB_WIDTH / 8,
	.accel		= FB_ACCEL_NONE,
	.accel		= FB_ACCEL_NONE,
};
};


static struct fb_var_screeninfo ssd1307fb_var = {
static struct fb_var_screeninfo ssd1307fb_var = {
	.xres		= SSD1307FB_WIDTH,
	.yres		= SSD1307FB_HEIGHT,
	.xres_virtual	= SSD1307FB_WIDTH,
	.yres_virtual	= SSD1307FB_HEIGHT,
	.bits_per_pixel	= 1,
	.bits_per_pixel	= 1,
};
};


static int ssd1307fb_write_array(struct i2c_client *client, u8 type, u8 *cmd, u32 len)
static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type)
{
{
	u8 *buf;
	struct ssd1307fb_array *array;
	int ret = 0;


	buf = kzalloc(len + 1, GFP_KERNEL);
	array = kzalloc(sizeof(struct ssd1307fb_array) + len, GFP_KERNEL);
	if (!buf) {
	if (!array)
		dev_err(&client->dev, "Couldn't allocate sending buffer.\n");
		return NULL;
		return -ENOMEM;
	}


	buf[0] = type;
	array->type = type;
	memcpy(buf + 1, cmd, len);


	ret = i2c_master_send(client, buf, len + 1);
	return array;
	if (ret != len + 1) {
		dev_err(&client->dev, "Couldn't send I2C command.\n");
		goto error;
}
}


error:
static int ssd1307fb_write_array(struct i2c_client *client,
	kfree(buf);
				 struct ssd1307fb_array *array, u32 len)
{
	int ret;

	len += sizeof(struct ssd1307fb_array);

	ret = i2c_master_send(client, (u8 *)array, len);
	if (ret != len) {
		dev_err(&client->dev, "Couldn't send I2C command.\n");
		return ret;
		return ret;
	}
	}


static inline int ssd1307fb_write_cmd_array(struct i2c_client *client, u8 *cmd, u32 len)
	return 0;
{
	return ssd1307fb_write_array(client, SSD1307FB_COMMAND, cmd, len);
}
}


static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd)
static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd)
{
{
	return ssd1307fb_write_cmd_array(client, &cmd, 1);
	struct ssd1307fb_array *array;
}
	int ret;


static inline int ssd1307fb_write_data_array(struct i2c_client *client, u8 *cmd, u32 len)
	array = ssd1307fb_alloc_array(1, SSD1307FB_COMMAND);
{
	if (!array)
	return ssd1307fb_write_array(client, SSD1307FB_DATA, cmd, len);
		return -ENOMEM;

	array->data[0] = cmd;

	ret = ssd1307fb_write_array(client, array, 1);
	kfree(array);

	return ret;
}
}


static inline int ssd1307fb_write_data(struct i2c_client *client, u8 data)
static inline int ssd1307fb_write_data(struct i2c_client *client, u8 data)
{
{
	return ssd1307fb_write_data_array(client, &data, 1);
	struct ssd1307fb_array *array;
	int ret;

	array = ssd1307fb_alloc_array(1, SSD1307FB_DATA);
	if (!array)
		return -ENOMEM;

	array->data[0] = data;

	ret = ssd1307fb_write_array(client, array, 1);
	kfree(array);

	return ret;
}
}


static void ssd1307fb_update_display(struct ssd1307fb_par *par)
static void ssd1307fb_update_display(struct ssd1307fb_par *par)
{
{
	struct ssd1307fb_array *array;
	u8 *vmem = par->info->screen_base;
	u8 *vmem = par->info->screen_base;
	int i, j, k;
	int i, j, k;


	array = ssd1307fb_alloc_array(par->width * par->height / 8,
				      SSD1307FB_DATA);
	if (!array)
		return;

	/*
	/*
	 * The screen is divided in pages, each having a height of 8
	 * The screen is divided in pages, each having a height of 8
	 * pixels, and the width of the screen. When sending a byte of
	 * pixels, and the width of the screen. When sending a byte of
@@ -134,24 +179,23 @@ static void ssd1307fb_update_display(struct ssd1307fb_par *par)
	 *  (5) A4 B4 C4 D4 E4 F4 G4 H4
	 *  (5) A4 B4 C4 D4 E4 F4 G4 H4
	 */
	 */


	for (i = 0; i < (SSD1307FB_HEIGHT / 8); i++) {
	for (i = 0; i < (par->height / 8); i++) {
		ssd1307fb_write_cmd(par->client, SSD1307FB_START_PAGE_ADDRESS + (i + 1));
		for (j = 0; j < par->width; j++) {
		ssd1307fb_write_cmd(par->client, 0x00);
			u32 array_idx = i * par->width + j;
		ssd1307fb_write_cmd(par->client, 0x10);
			array->data[array_idx] = 0;

		for (j = 0; j < SSD1307FB_WIDTH; j++) {
			u8 buf = 0;
			for (k = 0; k < 8; k++) {
			for (k = 0; k < 8; k++) {
				u32 page_length = SSD1307FB_WIDTH * i;
				u32 page_length = par->width * i;
				u32 index = page_length + (SSD1307FB_WIDTH * k + j) / 8;
				u32 index = page_length + (par->width * k + j) / 8;
				u8 byte = *(vmem + index);
				u8 byte = *(vmem + index);
				u8 bit = byte & (1 << (j % 8));
				u8 bit = byte & (1 << (j % 8));
				bit = bit >> (j % 8);
				bit = bit >> (j % 8);
				buf |= bit << k;
				array->data[array_idx] |= bit << k;
			}
			}
			ssd1307fb_write_data(par->client, buf);
		}
		}
	}
	}

	ssd1307fb_write_array(par->client, array, par->width * par->height / 8);
	kfree(array);
}
}




@@ -227,16 +271,167 @@ static struct fb_deferred_io ssd1307fb_defio = {
	.deferred_io	= ssd1307fb_deferred_io,
	.deferred_io	= ssd1307fb_deferred_io,
};
};


static int ssd1307fb_ssd1307_init(struct ssd1307fb_par *par)
{
	int ret;

	par->pwm = pwm_get(&par->client->dev, NULL);
	if (IS_ERR(par->pwm)) {
		dev_err(&par->client->dev, "Could not get PWM from device tree!\n");
		return PTR_ERR(par->pwm);
	}

	par->pwm_period = pwm_get_period(par->pwm);
	/* Enable the PWM */
	pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period);
	pwm_enable(par->pwm);

	dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n",
		par->pwm->pwm, par->pwm_period);

	/* Map column 127 of the OLED to segment 0 */
	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
	if (ret < 0)
		return ret;

	/* Turn on the display */
	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
	if (ret < 0)
		return ret;

	return 0;
}

static int ssd1307fb_ssd1307_remove(struct ssd1307fb_par *par)
{
	pwm_disable(par->pwm);
	pwm_put(par->pwm);
	return 0;
}

static struct ssd1307fb_ops ssd1307fb_ssd1307_ops = {
	.init	= ssd1307fb_ssd1307_init,
	.remove	= ssd1307fb_ssd1307_remove,
};

static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
{
	int ret;

	/* Set initial contrast */
	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
	ret = ret & ssd1307fb_write_cmd(par->client, 0x7f);
	if (ret < 0)
		return ret;

	/* Set COM direction */
	ret = ssd1307fb_write_cmd(par->client, 0xc8);
	if (ret < 0)
		return ret;

	/* Set segment re-map */
	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
	if (ret < 0)
		return ret;

	/* Set multiplex ratio value */
	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO);
	ret = ret & ssd1307fb_write_cmd(par->client, par->height - 1);
	if (ret < 0)
		return ret;

	/* set display offset value */
	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET);
	ret = ssd1307fb_write_cmd(par->client, 0x20);
	if (ret < 0)
		return ret;

	/* Set clock frequency */
	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ);
	ret = ret & ssd1307fb_write_cmd(par->client, 0xf0);
	if (ret < 0)
		return ret;

	/* Set precharge period in number of ticks from the internal clock */
	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD);
	ret = ret & ssd1307fb_write_cmd(par->client, 0x22);
	if (ret < 0)
		return ret;

	/* Set COM pins configuration */
	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG);
	ret = ret & ssd1307fb_write_cmd(par->client, 0x22);
	if (ret < 0)
		return ret;

	/* Set VCOMH */
	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH);
	ret = ret & ssd1307fb_write_cmd(par->client, 0x49);
	if (ret < 0)
		return ret;

	/* Turn on the DC-DC Charge Pump */
	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP);
	ret = ret & ssd1307fb_write_cmd(par->client, 0x14);
	if (ret < 0)
		return ret;

	/* Switch to horizontal addressing mode */
	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE);
	ret = ret & ssd1307fb_write_cmd(par->client,
					SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL);
	if (ret < 0)
		return ret;

	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
	ret = ret & ssd1307fb_write_cmd(par->client, 0x0);
	ret = ret & ssd1307fb_write_cmd(par->client, par->width - 1);
	if (ret < 0)
		return ret;

	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
	ret = ret & ssd1307fb_write_cmd(par->client, 0x0);
	ret = ret & ssd1307fb_write_cmd(par->client,
					par->page_offset + (par->height / 8) - 1);
	if (ret < 0)
		return ret;

	/* Turn on the display */
	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
	if (ret < 0)
		return ret;

	return 0;
}

static struct ssd1307fb_ops ssd1307fb_ssd1306_ops = {
	.init	= ssd1307fb_ssd1306_init,
};

static const struct of_device_id ssd1307fb_of_match[] = {
	{
		.compatible = "solomon,ssd1306fb-i2c",
		.data = (void *)&ssd1307fb_ssd1306_ops,
	},
	{
		.compatible = "solomon,ssd1307fb-i2c",
		.data = (void *)&ssd1307fb_ssd1307_ops,
	},
	{},
};
MODULE_DEVICE_TABLE(of, ssd1307fb_of_match);

static int ssd1307fb_probe(struct i2c_client *client,
static int ssd1307fb_probe(struct i2c_client *client,
			   const struct i2c_device_id *id)
			   const struct i2c_device_id *id)
{
{
	struct fb_info *info;
	struct fb_info *info;
	u32 vmem_size = SSD1307FB_WIDTH * SSD1307FB_HEIGHT / 8;
	struct device_node *node = client->dev.of_node;
	u32 vmem_size;
	struct ssd1307fb_par *par;
	struct ssd1307fb_par *par;
	u8 *vmem;
	u8 *vmem;
	int ret;
	int ret;


	if (!client->dev.of_node) {
	if (!node) {
		dev_err(&client->dev, "No device tree data found!\n");
		dev_err(&client->dev, "No device tree data found!\n");
		return -EINVAL;
		return -EINVAL;
	}
	}
@@ -247,6 +442,31 @@ static int ssd1307fb_probe(struct i2c_client *client,
		return -ENOMEM;
		return -ENOMEM;
	}
	}


	par = info->par;
	par->info = info;
	par->client = client;

	par->ops = (struct ssd1307fb_ops *)of_match_device(ssd1307fb_of_match,
							   &client->dev)->data;

	par->reset = of_get_named_gpio(client->dev.of_node,
					 "reset-gpios", 0);
	if (!gpio_is_valid(par->reset)) {
		ret = -EINVAL;
		goto fb_alloc_error;
	}

	if (of_property_read_u32(node, "solomon,width", &par->width))
		par->width = 96;

	if (of_property_read_u32(node, "solomon,height", &par->height))
		par->width = 16;

	if (of_property_read_u32(node, "solomon,page-offset", &par->page_offset))
		par->page_offset = 1;

	vmem_size = par->width * par->height / 8;

	vmem = devm_kzalloc(&client->dev, vmem_size, GFP_KERNEL);
	vmem = devm_kzalloc(&client->dev, vmem_size, GFP_KERNEL);
	if (!vmem) {
	if (!vmem) {
		dev_err(&client->dev, "Couldn't allocate graphical memory.\n");
		dev_err(&client->dev, "Couldn't allocate graphical memory.\n");
@@ -256,9 +476,15 @@ static int ssd1307fb_probe(struct i2c_client *client,


	info->fbops = &ssd1307fb_ops;
	info->fbops = &ssd1307fb_ops;
	info->fix = ssd1307fb_fix;
	info->fix = ssd1307fb_fix;
	info->fix.line_length = par->width / 8;
	info->fbdefio = &ssd1307fb_defio;
	info->fbdefio = &ssd1307fb_defio;


	info->var = ssd1307fb_var;
	info->var = ssd1307fb_var;
	info->var.xres = par->width;
	info->var.xres_virtual = par->width;
	info->var.yres = par->height;
	info->var.yres_virtual = par->height;

	info->var.red.length = 1;
	info->var.red.length = 1;
	info->var.red.offset = 0;
	info->var.red.offset = 0;
	info->var.green.length = 1;
	info->var.green.length = 1;
@@ -272,17 +498,6 @@ static int ssd1307fb_probe(struct i2c_client *client,


	fb_deferred_io_init(info);
	fb_deferred_io_init(info);


	par = info->par;
	par->info = info;
	par->client = client;

	par->reset = of_get_named_gpio(client->dev.of_node,
					 "reset-gpios", 0);
	if (!gpio_is_valid(par->reset)) {
		ret = -EINVAL;
		goto reset_oled_error;
	}

	ret = devm_gpio_request_one(&client->dev, par->reset,
	ret = devm_gpio_request_one(&client->dev, par->reset,
				    GPIOF_OUT_INIT_HIGH,
				    GPIOF_OUT_INIT_HIGH,
				    "oled-reset");
				    "oled-reset");
@@ -293,23 +508,6 @@ static int ssd1307fb_probe(struct i2c_client *client,
		goto reset_oled_error;
		goto reset_oled_error;
	}
	}


	par->pwm = pwm_get(&client->dev, NULL);
	if (IS_ERR(par->pwm)) {
		dev_err(&client->dev, "Could not get PWM from device tree!\n");
		ret = PTR_ERR(par->pwm);
		goto pwm_error;
	}

	par->pwm_period = pwm_get_period(par->pwm);

	dev_dbg(&client->dev, "Using PWM%d with a %dns period.\n", par->pwm->pwm, par->pwm_period);

	ret = register_framebuffer(info);
	if (ret) {
		dev_err(&client->dev, "Couldn't register the framebuffer\n");
		goto fbreg_error;
	}

	i2c_set_clientdata(client, info);
	i2c_set_clientdata(client, info);


	/* Reset the screen */
	/* Reset the screen */
@@ -318,34 +516,25 @@ static int ssd1307fb_probe(struct i2c_client *client,
	gpio_set_value(par->reset, 1);
	gpio_set_value(par->reset, 1);
	udelay(4);
	udelay(4);


	/* Enable the PWM */
	if (par->ops->init) {
	pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period);
		ret = par->ops->init(par);
	pwm_enable(par->pwm);
		if (ret)

			goto reset_oled_error;
	/* Map column 127 of the OLED to segment 0 */
	ret = ssd1307fb_write_cmd(client, SSD1307FB_SEG_REMAP_ON);
	if (ret < 0) {
		dev_err(&client->dev, "Couldn't remap the screen.\n");
		goto remap_error;
	}
	}


	/* Turn on the display */
	ret = register_framebuffer(info);
	ret = ssd1307fb_write_cmd(client, SSD1307FB_DISPLAY_ON);
	if (ret) {
	if (ret < 0) {
		dev_err(&client->dev, "Couldn't register the framebuffer\n");
		dev_err(&client->dev, "Couldn't turn the display on.\n");
		goto panel_init_error;
		goto remap_error;
	}
	}


	dev_info(&client->dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);
	dev_info(&client->dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);


	return 0;
	return 0;


remap_error:
panel_init_error:
	unregister_framebuffer(info);
	if (par->ops->remove)
	pwm_disable(par->pwm);
		par->ops->remove(par);
fbreg_error:
	pwm_put(par->pwm);
pwm_error:
reset_oled_error:
reset_oled_error:
	fb_deferred_io_cleanup(info);
	fb_deferred_io_cleanup(info);
fb_alloc_error:
fb_alloc_error:
@@ -359,8 +548,8 @@ static int ssd1307fb_remove(struct i2c_client *client)
	struct ssd1307fb_par *par = info->par;
	struct ssd1307fb_par *par = info->par;


	unregister_framebuffer(info);
	unregister_framebuffer(info);
	pwm_disable(par->pwm);
	if (par->ops->remove)
	pwm_put(par->pwm);
		par->ops->remove(par);
	fb_deferred_io_cleanup(info);
	fb_deferred_io_cleanup(info);
	framebuffer_release(info);
	framebuffer_release(info);


@@ -368,17 +557,12 @@ static int ssd1307fb_remove(struct i2c_client *client)
}
}


static const struct i2c_device_id ssd1307fb_i2c_id[] = {
static const struct i2c_device_id ssd1307fb_i2c_id[] = {
	{ "ssd1306fb", 0 },
	{ "ssd1307fb", 0 },
	{ "ssd1307fb", 0 },
	{ }
	{ }
};
};
MODULE_DEVICE_TABLE(i2c, ssd1307fb_i2c_id);
MODULE_DEVICE_TABLE(i2c, ssd1307fb_i2c_id);


static const struct of_device_id ssd1307fb_of_match[] = {
	{ .compatible = "solomon,ssd1307fb-i2c" },
	{},
};
MODULE_DEVICE_TABLE(of, ssd1307fb_of_match);

static struct i2c_driver ssd1307fb_driver = {
static struct i2c_driver ssd1307fb_driver = {
	.probe = ssd1307fb_probe,
	.probe = ssd1307fb_probe,
	.remove = ssd1307fb_remove,
	.remove = ssd1307fb_remove,
+2 −0
Original line number Original line Diff line number Diff line
@@ -14,6 +14,8 @@ struct display_timings;


#define OF_USE_NATIVE_MODE -1
#define OF_USE_NATIVE_MODE -1


int of_get_display_timing(struct device_node *np, const char *name,
		struct display_timing *dt);
struct display_timings *of_get_display_timings(struct device_node *np);
struct display_timings *of_get_display_timings(struct device_node *np);
int of_display_timings_exist(struct device_node *np);
int of_display_timings_exist(struct device_node *np);